Items where Division is "Faculty of Engineering" and Year is 2025

Group by: Creators | Item Type | No Grouping

Jump to: Article | Book Section | Conference or Workshop Item | Newspaper | UPM News

Number of items: 427.

Article

A. Farade, Rizwan and Abdul Wahab, Noor Izzri and A. Mansour, Diaa Eldin and Rafiq, Muhammad and Yunus Khan, T. M. and Shaik, Abdul Saddique and Zdanowski, Maciej and Ganachari, Sharanabasava V. and Kumar Rajamony, Reji and Ahamad Khatik, Ramjan and Nazeer, Abdul (2025) Dielectric nanofluids for transformers: a review on stability, dielectric, thermophysical, and chemical properties. IEEE Access, 13. pp. 142467-142492. ISSN 2169-3536

Aamara, Fouzey Salem and Balachandran, Praveen Kumar and Yusof, Yushaizad and Moohd Radzi, Mohd Amran and Mohd Zainuri, Muhammad Ammirrul Atiqi (2025) Hybrid passive damping filter of single-phase grid-tied PV-micro inverter. International Journal of Electrical and Computer Engineering (IJECE), 15 (4). pp. 3660-3682. ISSN 2088-8708; eISSN: 2722-2578

Ab Razak, Mohd Shahrizal and Masri, Amirah Afiqah and Mohamad, Noor Asiah and Rosdi, Nor Syamimi and Khan, Abdul Rehman (2025) Evaluation of mean wave overtopping and maximum individual wave overtopping on rock revetment. Jurnal Teknologi, 87 (2). pp. 329-340. ISSN 0127-9696; eISSN: 2180-3722

Aba Hussen, Omar S. and Hashim, Shaiful J. and Sulaiman Member, Nasri and Alhaddad, S.A.R. and Ribbfors, Bassam Y. and Umeda, Masanobu and Katamine, Keiichi (2025) Enhancing campus mobility: simulated multi-objective optimization of electric vehicle sharing systems within an intelligent transportation system frameworks. IEEE Open Journal of Vehicular Technology, 6. pp. 315-331. ISSN 2644-1330

Abd Aziz Abdullah, Sharifah Mona and Abdullah, Luqman Chuah and Md Jamil, Siti Nurul Ain and Ting, Teo Ming and Choong, Thomas Shean Yaw (2025) Amine-functionalized radiation-grafted nylon-6 fibers: synthesis and adsorption performance for diclofenac sodium. Iranian Polymer Journal, 34. pp. 1435-1451. ISSN 1026-1265; eISSN: 1735-5265

Abd Latif, Amir and Ishak, Mohamad Ridzwan and Razman, Muhammad Rizal and Yidris, Noorfaizal and Mohd Zuhri, Mohamed Yusoff and Muhammad Rizal, Muhammad Asyraf and Ramli, Zuliskandar (2025) Experimental and numerical analysis of pGFRP and wood cross-arm in latticed tower: a comprehensive study of mechanical deformation and flexural creep. Scientific Reports, 15 (1). art. no. 1432. pp. 1-28. ISSN 2045-2322

Abd Malek, Norhazwani and Masuri, S. U. and Saidur, R. and Tan, K. H. and Rajamony, Reji Kumar and Supeni, Eris Elianddy and Aiza Jaafar, C. N. and Pandey, A. K. (2025) Thermophysical properties and heat transfer performance of Aqueous inhibited propylene glycol/MXene nanofluid for solar photovoltaic/ thermal cooling system. Journal of Thermal Analysis and Calorimetry, 150. pp. 6627-6655. ISSN 1388-6150; eISSN: 1588-2926

Abd Mutalib, Mohd Azri and Azlan, Norsinnira Zainul and Norsahperi, Nor Mohd Haziq and Hassan, Hafizu Ibrahim (2025) Quantitative measure of the functional ability index using activity of daily living based on motor activity log. Jurnal Kejuruteraan, 37 (6). pp. 2657-2665. ISSN 0128-0198; eISSN: 2289-7526

Abd Mutalib, Mohd Azri and Zainul Azlan, Norsinnira and Norsahperi, Nor Mohd Haziq (2025) Quantifying and assessing post-stroke patients' functional capability level for independent daily activities: a review. Journal of Advanced Research in Applied Sciences and Engineering Technology, 52 (1). pp. 209-233. ISSN 2462-1943

Abd Mutalib, Mohd Azri and Zainul Azlan, Norsinnira and Norsahperi, Nor Mohd Haziq and Hafizu Hassan, Ibrahim (2025) Analyzing activity of daily living data utilizing motor activity log toward quantitative scoring system. IEEE Access, 13. pp. 30334-30349. ISSN 2169-3536

Abd Rahman, Nurul Izzah and Ismail, Muhammad Nazirul Iszat (2025) Cognitive ergonomic-driven technology: a pathway to improve mental workload, body posture, and work performance of ageing workers in office setting. Interdisciplinary Description of Complex Systems, 23 (2). pp. 118-129. ISSN 1334-4676; eISSN: 1334-4684

Abdul Jalil, Nawal Aswan and Abdul Aziz, Azizul and Md Rezali, Khairil Anas (2025) Evaluating key factors for the Private Vehicle Inspection (PVI) framework development in Malaysia. ASEAN Engineering Journal, 15 (2). pp. 141-148. ISSN 2586-9159

Abdul Somat, Husna and Saipul Anwar, Intan Safura and Wan Mustapha, Wan Aida and Mustapa Kamal, Siti Mazlina (2025) Subcritical water extraction (SWE) and ultrasonic-assisted extraction (UAE) of bioactive compounds from Morinda citrifolia: comparative evaluation of process efficiency (Pengekstrakan air subkritikal (SWE) dan pengekstrakan berbantukan ultrasonik (UAE) sebatian bioaktif daripada Morinda citrifolia: penilaian perbandingan kecekapan proses). Sains Malaysiana, 54 (4). pp. 1113-1126. ISSN 0126-6039; eISSN: 2735-0118

Abdulghani, Abdulrahman M. and Abdullah, Azizol and Rahiman, A. R. and Abdul Hamid, Nor Asilah Wati and Akram, Bilal Omar and Raissouli, Hafsa (2025) Navigating the complexities of controller placement in SD-WANs: a multi-objective perspective on current trends and future challenges. Computer Systems Science and Engineering, 49 (1). pp. 123-157. ISSN 0267-6192

Abdulghani, Abdulrahman M. and Abdullah, Azizol and Rahiman, Amir Rizaan and Abdul Hamid, Nor Asilah Wati and Akram, Bilal Omar (2025) Network-aware Gaussian mixture models for multi-objective SD-WAN controller placement. Electronics (Switzerland), 14 (15). art. no. 3044. ISSN 2079-9292

Abdullah, Muhd Afiq Hizami and Rashid, Raizal S.M. and Alnutayfat, Abdullah (2025) Determination of the mechanical properties and gamma-neutron shielding effectiveness of ultra-high performance dense concrete (UHPdC) exposed to high temperatures. Case Studies in Construction Materials, 22. art. no. e04157. pp. 1-21. ISSN 2214-5095; eISSN: 2214-5095

Abdullah, Roziyati and Leman, Zulkiflle and Baharudin, B. T.Hang Tuah and Ahmad, Siti Azfanizam (2025) Six-Sigma approach to improve industry engagement strategies in Malaysian apprenticeship program. International Journal of Evaluation and Research in Education, 14 (5). pp. 3565-3573. ISSN 2252-8822; eISSN: 2620-5440

Abdullah, Umi Rukiah and Wan Ab Karin Ghani, Wan Azlina and Mohd Kusin, Faradiella (2025) Dual-stage mineral carbonation approach to improve Ca and Fe reactivity in carbon sequestration of steel slag under optimized conditions. Journal of Sustainable Metallurgy, 12 (1). pp. 913-933. ISSN 2199-3823; eISSN: 2199-3831

Abdulshaheed, Ali and Mustapha, Faizal and Dol, Shahrul Sham and Ahmad, Kamarul Ariffin and Mustapha, Mazli and Anuar, Mohd (2025) Reverse engineering of impellers to reduce pipe network pressure and enable sustainable power generation using pumps as turbines (PATs). Results in Engineering, 28. art. no. 108124. pp. 1-11. ISSN 2590-1230

Abidin, Zurina Zainal (2025) Learning by brewing tea: student experiences of a Kolb-aligned, constructivist, learning-oriented assessment in chemical engineering. Education for Chemical Engineers, 54. art. no. 100495. pp. 1-11. ISSN 1749-7728 (In Press)

Abood Ahmed, Rabah and Samsudin, Khairulmizam (2025) Double adjacent error correction codes for ultra-fast cache memories. IEEE Access, 13. pp. 1-11. ISSN 2169-3536; eISSN: 2169-3536

Adanu, Emmanuel Otache and Mat Su, Ahmad Suhaizi and Yahya, Azmi and Ismail, Siti Amni and Che’ya, Nik Norasma and Mohd Roslim, Muhammad Huzaifah and Juraimi, Abdul Shukor and Abd Manaf, Muhamad Noor Hazwan and Motmainna, Mst (2025) Impact of different drone sprayer nozzle types on bio-fertilizer application in wetland paddy cultivation. Pertanika Journal of Science and Technology, 33 (6). pp. 2665-2683. ISSN 0128-7680; eISSN: 2231-8526

Afham Rahmat, Muhammad Aqil and Ibrahim, Adnan and Al-Aribe, Khaled M. and Syafiq Bin Mustaffa, Muhammad Ubaidah and Harmailil, Ihsan Okta and Ud Din, Sahibzada Imad (2025) Experimental analysis on the effect of multi-level array hollow semi-stadium fins (HSSF) and baffles on solar thermal air collector. Case Studies in Thermal Engineering, 71. art. no. 106165. pp. 1-20. ISSN 2214-157X

Afrizal, Nur Syaiful and Yusof, Khairul Adib and Muhamad, Lokman Hakim and Abdul Hamid, Nurul Shazana and Abdullah, Mardina and Abd Rahman, Mohd Amiruddin and Mashohor, Syamsiah and Hayakawa, Masashi (2025) Error analysis of geomagnetic field reconstruction model using negative learning for seismic anomaly detection. Computers, Materials and Continua, 86 (2). pp. 1-16. ISSN 1546-2218; eISSN: 1546-2226

Afzal, Asif and Buradi, Abdulrajak and Ağbulut, Ümit and Alwetaishi, Mamdooh and Fayaz, H. and Park, Sung Goon and Bordas, Stéphane P. A. (2025) Numerical investigation of melting of paraffin-wax phase change material in cone capsule with different alignments. Journal of Energy Storage, 141 (pt.D). art. no. 119288. pp. 1-17. ISSN 2352-152X

Ageh, Opeyemi Micheal and Hashim, Norhashila and Shamsudin, Rosnah and Che Man, Hasfalina and Mohd Ali, Maimunah and Onwude, Daniel I. and Dasore, Abhishek (2025) Optical imaging for food grain quality evaluation–recent advances and future perspectives. International Journal of Agricultural Sustainability, 23 (1). art. no. 2569166. pp. 1-26. ISSN 1473-5903; eISSN: 1747-762X

Ahmad, Javed and Ab Wahab, Mohd Nadhir and Ramli, Ahmad and Misro, Md Yushalify and Ezza, Wan Zafira and Wan Hasan, Wan Zuha (2025) Enhancing performance of global path planning for mobile robot through Alpha–Beta Guided Particle Swarm Optimization (ABGPSO) algorithm. Measurement: Journal of the International Measurement Confederation, 257. art. no. 118633. pp. 1-17. ISSN 0263-2241 (In Press)

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Maidin, Nurul Ain and Saharudin, Mohd Shahneel (2025) Water absorption analysis of oil palm fibre reinforced acrylonitrile butadiene styrene composites by Fick's law. Journal of Advanced Research in Experimental Fluid Mechanics and Heat Transfer, 20 (1). pp. 150-158. ISSN 2756-8202; eISSN: 2756-8202

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Md Yasir, Ahmad Shah Hizam (2025) Mechanical, thermal and physical properties of natural fiber reinforced composites for 3D printer - Fused Deposition Modeling: a review. Journal of Materials Research and Technology, 39. pp. 4063-4078. ISSN 2238-7854; eISSN: 2214-0697

Ahmad, Nasuha and Idris, Mohd Idzat and Amran, Mugahed and Hussin, Azimah and Abdul Karim, Julia and Masenwat, Norazreen and Rashid, Raizal S. M. and Yahya, Mohd Syukri (2025) Radiation-induced damage to concrete biological shielding materials: a state-of-the-art review. Jurnal Kejuruteraan, 37 (1). pp. 97-135. ISSN 0128-0198; eISSN: 2289-7526

Ahmad, Nordila and Ng, Choy Peng and Ismail, Neza and Wong, Mohd Muhaimin Ridwan and Abbas, Fuad and Law, Teik Hua and Zul Bahari, Ahmad Najman ‘Azam and Mohd Rofi, Muhamad Faisharulfaizi (2025) A review of major flood events in Malaysia between 1970-2024. Jurnal Kejuruteraan, 37 (2). pp. 909-921. ISSN 0128-0198; eISSN: 2289-7526

Ahmad, Nur Darina and Azis, Norhafiz and Jasni, Jasronita and Md Rezali, Khairil Anas and Talib, Mohd Aizam and Nik Ali, Nik Hakimi and Kozako, Masahiro (2025) Acoustic partial discharge localization in refined, bleached and deodorized palm oil (RBDPO) based on the Savitzky-Golay and moving average denoising methods. Pertanika Journal of Science and Technology, 33 (S4). pp. 115-128. ISSN 0128-7680; eISSN: 2231-8526

Ahmad Kamaroddin, Mohd Fadhzir and Sabli, Nordin and Tuan Abdullah, Tuan Amran and Abdullah, Luqman Chuah and Izhar, Shamsul and Hassan, Nurul Sahida and Abdul Jalil, Aishah (2025) Analysis of novel PBI/ZrP hybrid membrane-based CuCl-HCl electrolytic system on the performance of hydrogen production by FFD and RSM. Journal of Applied Science and Engineering, 29 (5). pp. 1153-1164. ISSN 2708-9967; eISSN: 2708-9975

Ahmad Shapi’i, Ruzanna and Othman, Siti Hajar and Naim, Mohd Nazli and Mohamed Amin Tawakkal, Intan Syafinaz (2025) Effect of chitosan-thymol ratio on the encapsulation of thymol in chitosan nanoparticle. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 721. art. no. 137201. ISSN 0927-7757; eISSN: 1873-4359

Ahmad Shapi’i, Ruzanna and Othman, Siti Hajar and Naim, Mohd Nazli and Mohamed Amin Tawakkal, Intan Syafinaz and Mohd Basri, Mohd Salahuddin (2025) Response surface methodological (RSM) approach for optimizing the mechanical properties of starch-based films incorporated with chitosan-encapsulated thymol. Physica Scripta, 100 (9). art. no. 095012. pp. 1-12. ISSN 0031-8949; eISSN: 1402-4896

Ahsan, Amimul and Mat Ali, Muhamad Jasarudin Bin and Rashid, Md. Redowan and Kabir, Mozaher Ul and Shafiquzzaman, Md. and Imteaz, Monzur and Idrus, Syazwani and Aljaradin, Mohammad and Alresheedi, Mohammad T. (2025) Sustainable leachate treatment by integrating electrolysis with palm-shell activated carbon contactor for environmental protection. Scientific Reports, 15. art. no. 560. pp. 1-13. ISSN 2045-2322; eISSN: 2045-2322

Aili Hamzah, Adila Fazliyana and Hamzah, Muhammad Hazwan and Nurulhuda, Khairudin and Che Man, Hasfalina and Ismail, Muhammad Heikal and Show, Pau Loke (2025) Formation of soluble organics and sugar degradation byproduct during hot compressed water pre-treatment of empty fruit bunch for biogas production. Biomass and Bioenergy, 199. art. no. 107960. ISSN 0961-9534; eISSN: 1873-2909

Aina, Ademola M. and Harith, Hazreen H. and Hashim, Norhashila and Mohamad Shukery, Mohamad Firdza (2025) Finite element modelling of the mechanical behavior of papaya fruit under compression. Postharvest Biology and Technology, 226. art. no. 113565. ISSN 0925-5214: eISSN; 1873-2356

Al-Adhadh, Ahmed Raad and Nik Daud, Nik Norsyahariati and Yusuf, Badronnisa and Al-Rkaby, Alaa Hussein (2025) Improving the shear strength and compressibility of sandy soil by utilizing calcined shale and cement. Civil and Environmental Engineering, 1 (1). pp. 23-37. ISSN 1336-5835; eISSN: 2199-6512

Al-Baldawi, Maryam Firas and Abdul Aziz, Farah Nora Aznieta and Abbas, Al Ghazali Noor and Mohd Nasir, Noor Azline and Abdan, Khalina and Mohamed Sutan, Norsuzailina (2025) Bibliometric review on geopolymer modified with nanomaterialusing VOS viewer. Pertanika Journal of Science and Technology, 33 (S4). pp. 1-25. ISSN 0128-7680; eISSN: 2231-8526

Al-Baldawi, Maryam Firas and Abdul Aziz, Farah Nora Aznieta and Mohamed Sutan, Norsuzailina and Mohd Nasir, Noor Azline and Abdan, Khalina and Abbas, Al Ghazali Noor and Zahid, Muhammad (2025) Fresh and hardened properties of different percentages of Hybrid Kenaf-Glass fibres reinforced geopolymer concrete under ambient curing condition. Journal of Advanced Research in Applied Mechanics, 135 (1). pp. 206-218. ISSN 2289-7895

Al-Hgaish, Areen Metib and Atan, Rodziah and Yaakob, Razali and Osman, Mohd Hafeez (2025) A robust prioritization framework of data quality dimensions to improve ML-driven healthcare systems using AHP and sensitivity analysis. IEEE Access, 13. pp. 158057-158082. ISSN 2169-3536

Al-Isawi, Ather Salah Hadi and Muhammad, Sufri and Admodisastro, Novia Indriaty and Ahmad, Siti Anom and Mohamed, Raihani (2025) An analytical review of brainwave analysis for mind-controlled drones: utilizing hybrid neural networks and motor imagery. Baghdad Science Journal, 22 (10). art. no. 28. pp. 3530-3545. ISSN 2078-8665; eISSN: 2411-7986

Al-Qazzaz, Noor Kamal and Aldoori, Alaa A. and Hussein, Tabarak Emad and Mohammed Mahdi, Massarra and Mohd Ali, Sawal Hamid and Ahmad, Siti Anom (2025) Deep-learning-based mobile application for detecting COVID-19. Al-Khwarizmi Engineering Journal, 21 (1). pp. 13-27. ISSN 1818-1171; eISSN: 2312-0789

Al-Ragehi, Haythem and Al-Qadami, Ebrahim and Ahsan, Amimul and Mohammad Razi, Mohd Adib and Shah, Syed Muzzamil Hussain and Aljaradin, Mohammad and Md Shafiquzzaman and Idrus, Syazwani and Imteaz, Monzur (2025) Performance enhancement of a double slope solar still integrated with external condenser and internal heating system. Environmental Progress and Sustainable Energy, 45 (1). art. no. e70179. ISSN 1944-7442; eISSN: 1944-7450

Al-Sammarraie, Mustafa A.J. and Gokalp, Zeki and Abd Aziz, Samsuzana (2025) Analysis of the effectiveness of natural treatments for preserving apricots and the YOLOv7 application for early damage detection. Discover Food, 5 (1). art. no. 139. pp. 1-17. ISSN 2731-4286

Al-Shalawi, Faisal Dakhelallah and Mohamed Ariff, Azmah Hanim and Mohd Ariffin, Mohd Khairol Anuar and Seng Kim, Collin Looi and Brabazon, Dermot (2025) Influence of nozzle temperature, bed temperature, and printing speed on the tensile strength of 3D-printed PLA specimens. ASEAN Engineering Journal, 15 (2). pp. 85-90. ISSN 2586-9159

AlRijeb, Mothena Fakhri Shaker and Othman, Mohammad Lutfi and Ishak, Aris and Hassan, Mohd Khair and Albaker, Baraa Munqith (2025) Whale optimization algorithm based on tent chaotic map for feature selection in soft sensors. Engineering, Technology and Applied Science Research, 15 (3). pp. 23537-23545. ISSN 2241-4487; eISSN: 1792-8036

Alatawi, Lila and Abdullah, Abdul Halim and Md Jamil, Siti Nurul Ain and Yunus, Robiah (2025) Removal of BTX from aqueous solutions by adsorption using PDMS foam. Egyptian Journal of Chemistry, 68 (4). pp. 395-406. ISSN 0449-2285; eISSN: 2357-0245

Alghrairi, Nashat and N. Aznieta, Farah and M. Ibrahim, Amer and Wan Hu, Jong and Mohammed Najm, Hadee and Anas, S. M. (2025) Improvement of concrete characterization using nanomaterials: state-of-the-art. Journal of Engineering (United Kingdom), 2025 (1). art. no. 8027667. pp. 1-30. ISSN 2314-4904; eISSN: 2314-4912

Ali, Muhammad Moazzam and Hashim, Shaiful Jahari and Chaudhary, Muhammad Akmal and Ferré, Guillaume and Rokhani, Fakhrul Zaman and Ahmad, Zaid (2025) Augmenting agricultural IoT networks: implementing Reed-Solomon codes for Rotating Polarization Waves over LPWAN in Rician fading environments. Results in Engineering, 28. art. no. 107406. pp. 1-12. ISSN 2590-1230

Alias, Nor Halaliza and Abdullah, Luqman Chuah and Yaw, Thomas Choong Shean and Md Jamil, Siti Nurul Ain and Ting, Teo Ming and Asis, Ahmad Jaril and Lee, Chuan Li and Adeyi, Abel Adekanmi (2025) Esterification of kenaf core fiber as a potential adsorbent for oil removal from palm oil mill effluent (POME). Processes, 13 (2). art. no. 63. pp. 1-26. ISSN 2227-9717

Alibekov, Ravshanbek Sultanbekovich and Aitbayeva, Aigerim Zhumagalievna and Khamitova, Barna Makhamatovna and Azimov, Abdugani Mutalovich and Sulaiman, Alifdalino and Mustapa Kamal, Siti Mazlina and Taip, Farah Saleena (2025) Effects of maltodextrin in freeze drying on the physical and functional properties of different type of milk powder. Cogent Food and Agriculture, 11 (1). art. no. 2473540. ISSN 2331-1932

Aljamala, Said Mohammed Mostafa and Safiee, Nor Azizi and Mohd Nasir, Noor Azline and Abdul Aziz, Farah Nora Aznieta (2025) Performance of recycling aggregate self-compacting concrete incorporating supplementary cementitious materials: an overview. Pertanika Journal of Science and Technology, 33 (S4). pp. 129-159. ISSN 0128-7680; eISSN: 2231-8526

Alkhabet, Mohammed M. and Girei, Saad H. and Farhan, Ammar H. and Hashim, Fatimah F. and Jaafar, Jaafar A. and Salih, Husam K. and Abbood, Manar F. and Yaacob, Mohd H. (2025) High-sensitivity optical fiber hydrogen sensing with MoO3/PANI/Pd nanocomposite. Materials Science in Semiconductor Processing, 200. art. no. 110021. pp. 1-15. ISSN 1369-8001

Almahameed, Bader Aldeen and Obeidat, Ayman M. and Bisharah, Majdi and Shraa, Tamer and Alkhadrawi, Sajeda (2025) Multi-objective risk optimization for sustainable modular infrastructure using machine learning and metaheuristics. Asian Journal of Civil Engineering, 27 (4). pp. 1533-1544. ISSN 1563-0854; eISSN: 2522-011X

Alrazen, Hayder A. and Aminossadati, Saiied M. and Mahmood, Hussein A. and Hussein, Ahmed Kadhim and Ahmad, Kamarul Arifin and Dol, Sharul Sham and Jabbar, Sattar and Algayyim, Sattar Jabbar Murad and Konarova, Muxina and Fattah, I. M.R. (2025) A review of the pathways, limitations, and perspectives of plastic waste recycling. Materials for Renewable and Sustainable Energy, 14. art. no. 50. pp. 1-37. ISSN 2194-1459; eISSN: 2194-1467

Alrijeb, Mothena Fakhri Shaker and Othman, Mohammad Lutfi and Ishak, Aris and Hassan, Mohd Khair and Albaker, Baraa Munqith (2025) Machine learning-driven soft sensor implementation for real-time fault detection in CDU of oil refinery. Engineering, Technology and Applied Science Research, 15 (1). pp. 20425-20432. ISSN 2241-4487; eISSN: 1792-8036

Alrubaye, Mohammed Saad Ashraf and As’arry, Azizan and Azman, Muhammed Amin and Mohamed Yusoff, Mohd Zuhri and Md Rezali, Khairil Anas and Zolfagharian, Ali (2025) Monitoring and prediction of air quality system using internet of things (IoT). Journal of Advanced Research in Applied Sciences and Engineering Technology, 48 (1). pp. 61-76. ISSN 2462-1943

Alsudairi, Ahmad Nayef Salih and Mohd Rafie, Azmin Shakrine and Algarni, Abdullah Mohammad and Md Ali, Syaril Azrad and Gires, Ezanee and Abdullah, Amini Amir (2025) Utilizing model-based systems engineering (MBSE) for tailoring an Islamic values-based sounding rocket development cycle. Journal of Aeronautics, Astronautics and Aviation, 57 (3s). pp. 389-402. ISSN 1990-7710

Al‐Tawalbeh, Nedaa and Zafar, Muhammad Hamza and Abuishmais, Ibrahim and Mohd Zainuri, Muhammad Ammirrul Atiqi and Mohd Radzi, Mohd Amran (2025) Maximizing energy harvesting in grid-connected hybrid photovoltaic and thermoelectric generator systems: An adaptive global power tracking technique. Environmental Progress and Sustainable Energy, 44 (4). art. no. e14621. ISSN 1944-7442; eISSN: 1944-7450

Amerhaider Nuar, Nurul Nazihah and Md Jamil, Siti Nurul Ain and Choong, Thomas Shean Yaw and Mahadzir, Syazana Ishami and Mat Azmi, Intan Diana and Mohd Basri, Mohd Salahuddin and Abdul Hamid, Mohamad Rezi (2025) Optimized degradation of doxycycline in aqueous systems using calcium peroxide nanoparticles via response surface methodology. ACS Omega, 10 (10). pp. 10205-10219. ISSN 2470-1343 (In Press)

Ang, Yuhao and Mohd Shafri, Helmi Zulhaidi and Al-Habshi, Mohammed Mustafa (2025) Exploring frogeye leaf spot disease severity in soybean through hyperspectral data analysis and machine learning with Orange Data Mining. Agriculture and Natural Resources, 59 (2). art. no. 590201. pp. 1-11. ISSN 2468-1458; eISSN: 2452-316X

Anoraga, Satria Bhirawa and Shamsudin, Rosnah and Hamzah, Muhammad Hazwan and Sharif, Suzannah and Saputro, Arifin Dwi (2025) Effect of blanching conditions on physico-chemical characteristics of cocoa pod husk. International Food Research Journal, 32 (1). pp. 108-120. ISSN 1985-4668; eISSN: 2231-7546

Anoraga, Satria Bhirawa and Shamsudin, Rosnah and Hamzah, Muhammad Hazwan and Sharif, Suzannah and Saputro, Arifin Dwi and Mohd Basri, Mohd Salahuddin (2025) Optimizing pretreatment blanching process of browning, total phenol, and DPPH scavenging capacity in cocoa pod husk. Biomass Conversion and Biorefinery, 15 (16). pp. 23169-23183. ISSN 2190-6815; eISSN: 2190-6823

Arumugam, Theban and Ravindran, Priyadarshini and Sobri, Shafreeza and Ali, Salmiaton and Abdul Razak, Mus’Ab (2025) Public awareness and performance assessment of communal grease traps in Klang Valley, Malaysia. Pertanika Journal of Science and Technology, 33 (2). art. no. undefined. pp. 987-1005. ISSN 0128-7680; eISSN: 2231-8526

Asmadi, Farhana Azmira and Khalid, Nurul Afwani and Mohd Basri, Mohd Salahuddin and Othman, Siti Hajar and Talib, Rosnita A. and Balakrishnan, Thinesh Sharma and Mohamed Amin Tawakkal, Intan Syafinaz (2025) Enhanced sodium alginate-Based active packaging films via sonication, CaCl2 crosslinking, and patchouli essential oil incorporation. Journal of Science: Advanced Materials and Devices, 10 (3). art. no. 100973. ISSN 2468-2284; eISSN: 2468-2179

Asmadi, Muhammad Irfan Ahlami and Ismail, Ruqayyah and Ahmad Zakwan, Fariz Aswan and Muhammad Rashid, Raizal Saifulnaz and Zulkifli, Syaza Nur Iylia (2025) Structural performance of cellular stainless-steel beams with varied web hole diameters under fire conditions: finite element analysis and experimental insights. Jurnal Kejuruteraan, 37 (2). pp. 821-834. ISSN 0128-0198; eISSN: 2289-7526

Asming, Nur Aziemah Adilah and Khalid, Nurul Izzah and Ab Aziz, Norashikin and Mohd Thani, Nurfatimah and Maringgal, Bernard (2025) Efficient sanitation strategies: optimizing cleaning in place parameters for milk fouling deposit mitigation. Advances in Agricultural and Food Research Journal, 6 (1). pp. 1-15. ISSN 2735-1084

Azid, Nuramirah and Abdullah, Ermira Junita and Harmin, Mohammad Yazdi (2025) Self-sensing morphing wing using shape memory alloy actuator. Journal of Aeronautics, Astronautics and Aviation, 57 (3S). pp. 785-800. ISSN 1990-7710

Aziz, Firdaus and Malek, Sorayya and Sooriamoorthy, Shubathira and Mahamood, Ilham Asyilah and Wen, Chong Wei and Syed Ahmad, Sharifah M. and Amir Rudin, Putri Nur Fatin and Ali, Adliah Mhd (2025) Predicting medication wastage using machine learning based on patient beliefs. Digital Health, 11. art. no. 20552076251355127. ISSN 2055-2076

Aziz, Firdaus and Sooriamoorthy, Shubathira and Liew, Bryan and Syed Ahmad, Sharifah M. and Chong, Wei Wen and Malek, Sorayya and Mhd Ali, Adliah (2025) Preliminary study: data analytics for predicting medication adherence in Malaysian arthritis patients. Digital Health, 11. ISSN 2055-2076

Azizan, Muhammad Ashman Hakimi and Sulaiman, Mohd Hafis and Yaakob, Yazid (2025) Influence of propylene glycol on the tribological performance and lubrication mechanism of water-based lubricants incorporating silicon carbide, magnesium oxide and aluminium oxide nanoadditives. Jurnal Tribologi, 44. pp. 150-166. ISSN 2289-7232

Azka, Muhammad Adlan and Mohd Sapuan, Salit and Zainudin, Edi Syams (2025) Enhancing natural fiber-reinforced biopolymer composites with graphene nanoplatelets: mechanical, morphological, and thermal properties. Nanotechnology Reviews, 14 (1). art. no. 20250202. pp. 1-12. ISSN 2191-9089; eISSN: 2191-9097

Azka, Muhammad Adlan and Salit, M. Sapuan and Zainudin, E. S. (2025) Water absorption properties of graphene nanoplatelets filled bamboo/kenaf reinforced polylactic acid hybrid composites. International Journal of Biological Macromolecules, 285. art. no. 138411. pp. 1-11. ISSN 0141-8130; eISSN: 1879-0003

Azman, F. I. and Saleh, N. L. and Hashim, F. and Sali, A. and Ali, A. M. and Noor, A. S. M. (2025) An IoT-based hygiene monitoring system in the restroom. IEEE Access, 13. pp. 119348-119361. ISSN 2169-3536

Azmi, Nazatul Shima and Kadir Basha, Roseliza and Othman, Siti Hajar and P. Mohammed, Mohd Afandi and Wakisaka, Minato and Ariffin, Siti Hajar and Salim, Nur Hafizah (2025) Development of fish gelatin film for anti-fogging mushroom packaging. Journal of Food Engineering, 387. art. no. 112306. pp. 1-7. ISSN 0260-8774

Azunna, Sunday U. and Aziz, Farah N.A.A. and Rashid, Raizal S.M. (2025) Axial compression characteristics of rubberized geopolymer concrete column. Progress in Engineering Science, 2 (3). art. no. 100114. ISSN 2950-4252

Azunna, Sunday U. and Aziz, Farah N.A.A. and Rashid, Raizal S.M. and Mahsum, Ernaleza (2025) Stress–strain relationship of rubberized geopolymer concrete with slag and fly ash. Construction Materials, 5 (3). art. no. 42. pp. 1-40. ISSN 2673-7108

Babani, Suleiman and Hamidon, Mohd Nizar and Ismail, Alyani and Jaafar, Haslina and Hasan, Intan Helina and Shafee, Farah Nabilah and Shitu, Ibrahim Garba and Lamido, Jamila and Lawan, Sani Halliru and Yunusa, Zainab (2025) Material characterization and electrical performance of Prosopis africana conductive ink for antenna applications. Pertanika Journal of Science and Technology, 33 (S4). pp. 27-43. ISSN 0128-7680; eISSN: 2231-8526

Basil, Noorulden and Marhoon, Hamzah M. and Sahib, Dheyaaldeen Faez and Mohammed, Abdullah Fadhil and Ridha, Hussein Mohammed and Ma’arif, Alfian (2025) Accelerated black hole optimization algorithm with enhanced FOPID controller for omni-wheel drive mobile robot system. Neural Computing and Applications, 37 (21). pp. 16983-17014. ISSN 0941-0643; eISSN: 1433-3058

Bathumaly, Sangitha and Che Man, Hasfalina and Hashim, Norhashila and Omar, Rozita and Abdul Hamid, Mohamad Rezi (2025) Investigation of drying behavior of glutinous rice (Oryza sativa var. glutinosa) in a fixed-bed dryer. ASEAN Journal of Chemical Engineering, 25 (1). pp. 23-38. ISSN 1655-4418; eISSN: 2655-5409

Berman, Renan Belli and Almeida, Renato Saint Martin and Mohamed Ariff, Azmah Hanim and de Pieri, Edson Roberto and Al-Qureshi, Hazim Ali (2025) Novel approach for predicting the creep behavior of ceramic fibers using dimensional analysis. International Journal of Applied Ceramic Technology, 22 (1). art. no. e14876. pp. 1-8. ISSN 1546-542X; eISSN: 1744-7402

Bobba, Sujith and Leman, Z. (2025) Effect of deoxidation practice on the mechanical properties of low alloy plain carbon steel. International Journal of Steel Structures, 25. pp. 1271-1279. ISSN 1598-2351; eISSN: 2093-6311

Bobba, Sujith and Mukkollu, Sambasiva Rao and Bandaru, Chennakesava Rao and Leman, Zulkiflle (2025) Influence of heat treatment on the mechanical response of aluminum alloy-A392: supersaturation and aging effect. Metallography, Microstructure, and Analysis, 14 (6). pp. 1261-1270. ISSN 2192-9262; eISSN: 2192-9270

Chak, Yew Chung and Varatharajoo, Renuganth and Razoumny, Yury (2025) Solar sail trajectory optimization for interplanetary missions: part I—dynamics and optimal control. European Physical Journal: Special Topics, 234 (25). pp. 7895-7906. ISSN 1951-6355; eISSN: 1951-6401

Chandra, Devi and Nukman, Y. and Azka, Muhammad Adlan and Sapuan, S.M. and Yusuf, J. (2025) Review on integral stiffened panel of aircraft fuselage structure. Defence Technology, 46. pp. 1-11. ISSN 2214-9147

Chao, Zhe Zhu and Samuel, Olusegun David and Taheri-Garavand, Amin and Elboughdiri, Noureddine and Paramasivam, Prabhu and Hussain, Fayaz and Enweremadu, Christopher C. and Ayanie, Abinet Gosaye (2025) ANN-ANFIS model for optimising methylic composite biodiesel from neem and castor oil and predicting emissions of the biodiesel blend. Scientific Reports, 15 (1). art. no. 5638. pp. 1-27. ISSN 2045-2322

Che Soh, Azura and Abdul Rahman, Ribhan Zafira and Minhat, Mohd Sabri and Gunasegaran, S. (2025) Intelligent control rod selection algorithm for core power control at TRIGA Puspati Reactor using fuzzy logic technique. International Journal of Electrical Engineering and Applied Sciences, 8 (1). pp. 1-9. ISSN 2600-7495; eISSN: 2600-9633

Chen, Tiantian and Foong, Hui Foh and Li, Juan and Sun, Yawen and Tang, Wei and Fu, Jiangning and Ibrahim, Rahimah and Ahmad, Siti Anom (2025) The relationship between smartphone use and cognitive function among Chinese community-dwelling older adults: the moderating role of sex. Behaviour and Information Technology, 44 (14). pp. 3404-3415. ISSN 0144-929X; eISSN: 1362-3001

Chin, Nyuk L. and Lim, Joyce J.L. and Teoh, Sze Q. (2025) Physico-chemical properties and microbiological composition of optimised tempeh and milk kefir. Chemical Engineering Transactions, 118. pp. 217-222. ISSN 2283-9216

Dasore, Abhishek and Hashim, Norhashila and Shamsudin, Rosnah and Che Man, Hasfalina and Mohd Ali, Maimunah and Ageh, Opeyemi Micheal (2025) Optimization of machine learning models for predicting glutinous rice quality stored under various conditions. Journal of Stored Products Research, 111. art. no. 102550. pp. 1-11. ISSN 0022-474X; eISSN: 0022-474X

Daud, Nor Shazwani and Sabli, Nordin and Yoshida, Hiroyuki and Izhar, Shamsul (2025) Wheat germ protein extraction via subcritical water for water treatment process. Journal of Applied Science and Engineering, 28 (1). pp. 205-213. ISSN 2708-9967

Deng, Chan and Abdul Rahman, Ribhan Zafira and Ishak, Asnor Juraiza and Raja Ahmad, Raja Kamil (2025) MSMD-YOLO: enhanced printed circuit board defect detection with a multi-scale merging and attention network. IEEE Access. pp. 1-12. ISSN 2169-3536 (In Press)

Deng, Leipengyun and Mohd Radzi, Mohd Amran and Shafie, Suhaidi and Hassan, Mohd Khair (2025) Optimization of fuel cell switching control based on power following strategy in fuel cell hybrid electrical vehicle. International Journal of Renewable Energy Development, 14 (2). pp. 299-310. ISSN 2252-4940

Desouqi, Dalal and Mohd Salleh, Mohamad Amran and Roselee, Muhammad Hatta and M. Yahya, Aisyah and Alsalam, Bushra Abdo and Abdul Rashid, Suraya (2025) Mineralogical and petrographic characterisation of flake graphite in the graphite mica schist rocks from the Nubian Desert, Sudan. Scientific African, 27. art. no. e02602. pp. 1-13. ISSN 2468-2276

Diabis, Farag A. and Abu Talib, Abd Rahim and Mazlan, Norkhairunnisa and Supeni, Eris Elianddy (2025) Numerical study on the effect of four-lobe swirl generator and its transition parts on thermal performance enhancement and fluid flow. CFD Letters, 17 (10). pp. 120-148. ISSN 2180-1363; eISSN: 2180-1363

Diabis, Farag A. and Abu Talib, Abd Rahim and Mazlan, Norkhairunnisa and Supeni, Eris Elianddy (2025) An experimental study on the effect of lobe swirl device and its transition parts on thermal performance using Graphene-CuO/water nanohybrid. Case Studies in Thermal Engineering, 68. art. no. 105925. ISSN 2214-157X

Dirik, Cengiz and Biak, Dayang Radiah and Abdul Razak, Musab and Nik Ibrahim, Nik Nor Liyana (2025) Flooding probability in temporal risk assessment for LNG vaporizer unit established in West Coast Malaysia. Journal of Integrated Disaster Risk Management, 15 (1). pp. 1-20. ISSN 2185-8322

Dol, Sharul Sham and Hamdan, Hasan and Ahmad, Kamarul Arifin (2025) Numerical and experimental analysis of multiphase flows in subsea electric submersible pumps. Journal of Advanced Research in Experimental Fluid Mechanics and Heat Transfer, 20 (1). pp. 68-90. ISSN 2756-8202; eISSN: 2756-8202

Dol, Sharul Sham and Pagaling, Joaquin Rafael and Almansoori, Dana and Hamdan, Hasan (2025) Enhanced aerodynamic performance of NACA 0009 morphing airfoil: a study on camber morphing and vortex generators. Journal of Advanced Research in Experimental Fluid Mechanics and Heat Transfer, 20 (1). pp. 41-67. ISSN 2756-8202

Dzulkafli, Mohd Firdaus and Hairuddin, Abdul Aziz and Al Anbagi, Muntasser Abdulabbas Mossa (2025) The impact of air pressure on performance, combustion behavior, and emissions of an air-assisted port fuel injection HCCI engine. Pertanika Journal of Science and Technology, 33 (1). pp. 491-506. ISSN 0128-7680; eISSN: 2231-8526

Dzulkafli, Mohd Firdaus and Hairuddin, Abdul Aziz and Mossa, Muntasser A.A. (2025) The impact of intake temperature on air assisted fuel injection HCCI engine. Jurnal Teknologi, 88 (1). pp. 33-40. ISSN 0127-9696; eISSN: 2180-3722

El-yaqub, Balarabe and Wahid, Mohd Haniff and Zainal, Zulkarnain and Abdullah, Abdul Halim and Wan Ab Karim Ghani, Wan Azlina (2025) Porous carbon foams supported rGO-ppy//rGO for asymmteric supercapacitor device. Materials Science and Engineering: B, 317. art. no. 118173. pp. 1-14. ISSN 0921-5107

Falih, Ammar Ahmed and Ahmad Anas, Siti Barirah and A. Rasid, Mohd Fadlee and Hanafi, Marsyita (2025) Advancing 5G communication systems: a novel method for OOBE suppression in Filter-OFDM waveforms. Journal of Communications, 20 (2). pp. 113-130. ISSN 1796-2021

Fan, Luxin and Tang, Saihong and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah and Wang, Xinming (2025) Impact of image preprocessing and crack type distribution on YOLOv8-based road crack detection. Sensors, 25 (7). art. no. 2180. ISSN 1424-8220

Farade, Rizwan A. and Abdul Wahab, Noor Izzri and Rafiq, Muhammad and Shah, Nehad Ali and Khan, T. M.Yunus and Ghori, Syed Waheedullah (2025) Cutting-edge dielectric nanofluids: a review of factors influencing stability and thermo-dielectric properties. Journal of Thermal Analysis and Calorimetry, 150 (23). pp. 18917-18965. ISSN 1388-6150; eISSN: 1588-2926

Farade, Rizwan A. and Mansour, Diaa Eldin A. and Abdul Wahab, Noor Izzri and Ariffin, Mohd Khairol Anuar and Emara, Rana F. and Emara, Manal M. and El-Nemr, Mohamed K. and Rajamony, Reji Kumar (2025) Deeper insight into thermal conductivity, size, sedimentation, band gap, and moisture effect of nanoparticles on thermo-dielectric performance of nanofluids. Journal of Molecular Liquids, 434. art. no. 127986. pp. 1-17. ISSN 0167-7322

Farade, Rizwan A. and Mansour, Diaa-Eldin A. and Abdul Wahab, Noor Izzri and Ariffin, Mohd Khairol Anuar and Emara, Rana F. and Emara, Manal M. and El-Nemr, Mohamed K. and Rajamony, Reji Kumar (2025) Deeper insight into thermal conductivity, size, sedimentation, band gap, and moisture effect of nanoparticles on thermo-dielectric performance of nanofluids. Journal of Molecular Liquids, 434. art. no. 127986. ISSN 0167-7322; eISSN: 1873-3166

Farhan, Mohammed F. and Salman, Suhad D. and Leman, Z. and Alkbir, M. F.M. and Januddi, Fatihhi (2025) Analyzing vibration characteristics: a comparative study of laser vs. spindle systems. Al-Nahrain Journal for Engineering Sciences, 28 (1). pp. 44-51. ISSN 2521-9154; eISSN: 2521-9162

Fatchurrahman, Danial and Hilaili, Maulidia and Nurwahyuningsih and Russo, Lucia and Jahari, Mahirah and Fathi-Najafabadi, Ayoub (2025) Utilizing RGB Imaging and Machine Learning for freshness level determination of green bell pepper (Capsicum annuum L.) throughout its shelf-life. Postharvest Biology and Technology, 222. art. no. 113359. pp. 1-10. ISSN 0925-5214; eISSN: 0925-5214

Firdaus, A. H.M. and Sapuan, S. M. and Siddiqui, Vasi Uddin and Atiqah, A. and Zainudin, E. S. (2025) Mechanical, physical and morphological properties of arrowroot starch reinforced arrowroot nanocrystalline cellulose biopolymer nanocomposites film. Biomass and Bioenergy, 202. art. no. 108230. pp. 1-13. ISSN 0961-9534; eISSN: 1873-2909

Firdaus, A.H.M. and Sapuan, S.M. and Siddiqui, Vasi Uddin and Atiqah, A. and Zainudin, E.S. (2025) Mechanical, physical and morphological properties of arrowroot starch reinforced arrowroot nanocrystalline cellulose biopolymer nanocomposites film. Biomass and Bioenergy, 202. art. no. 108230. ISSN 0961-9534; eISSN: 1873-2909

Fujii, Masashi and Takayama, Yoshiki and Tomatsu, Chiaki and Sano, Kashu and Kishinami, Hidemi and Hirahara, Minamo and Farahin, Abd Wahab and Harun, Razif and Yusoff, Fatimah Md and Syukri, Fadhil and Furuya, Ken and Toda, Tatsuki (2025) Pilot outdoor cultivation of a marine haptophyte Tisochrysis lutea using a novel floating photobioreactor driven by electric rotary motor. Aquacultural Engineering, 113. art. no. 102666. pp. 1-13. ISSN 0144-8609

Ghaedi, Khaled and Javanmardi, Ahad and Ibrahim, Zainah and Rashid, Raizal and Gordan, Meisam and Khatibi, Hamed (2025) Experimental parametric study on the effect of diameter and number of bars on the cyclic performance of bar damper. Structures, 72. art. no. 108164. pp. 1-11. ISSN 2352-0124; eISSN: 2352-0124

Ghobadi, Vahideh and Ismail, Luthffi Idzhar and Wan Hasan, Wan Zuha and Ahmad, Haron and Ramli, Hafiz Rashidi and Norsahperi, Nor Mohd Haziq and Tharek, Anas and Hanapiah, Fazah Akhtar (2025) Challenges and solutions of deep learning-based automated liver segmentation: a systematic review. Computers in Biology and Medicine, 185. art. no. 109459. pp. 1-15. ISSN 0010-4825; eISSN: 1879-0534

Ginting, A. and Kasim, M. S. and Baharudin, B. T. Hang Tuah (2025) Machine learning-based surface roughness prediction in turning of hardened AISI 4340 steels: incorporating tool wear via cutting length. Journal of Applied Science and Engineering, 29 (1). pp. 23-31. ISSN 2708-9967; eISSN: 2708-9975

Gupta, Nischal and Megat-Johari, Megat Usamah and Megat-Johari, Nusayba (2025) Evaluating the impacts of cellphone use policies on cellphone-distracted fatal crashes. Journal of Safety Research, 94. pp. 329-339. ISSN 0022-4375; eISSN:1879-1247

Habib, Abdul and Firdaus, A. H.M. and Sapuan, S. M. and Abral, Hairul and Azka, Muhammad Adlan and Zainudin, E. S. and Atiqah, A. and Yusuf, J. (2025) Recent advancements in nanocellulose reinforced biopolymer hybrid composites: A review. Journal of Cleaner Production, 496. art. no. 145115. pp. 1-24. ISSN 0959-6526

Habib, Abdul and Mohd Sapuan, Salit and Zainudin, Edi Syams and Atiqah, Afdzaluddin (2025) Morphological, physical, thermal, and mechanical properties of carbon nanotubes reinforced arrowroot starch composites. Nanotechnology Reviews, 14 (1). art. no. 20250216. pp. 1-11. ISSN 2191-9089; eISSN: 2191-9097

Habib, Abdul and Sapuan, S.M. and Zainudin, E.S. and Atiqah, A. (2025) A flexible pressure sensor based on arrowroot starch/CNT bio-nanocomposite films for piezoelectric application. Biomass and Bioenergy, 202. art. no. 108243. ISSN 0961-9534; eISSN: 1873-2909

Hafidh Said, Al Baalawy Said and Salim, Salim Mkubwa and Romli, Fairuz Izzuddin (2025) Conceptual design exploration of a new aircraft passenger seat's tray table with adjustable height. Journal of Aeronautics, Astronautics and Aviation, 57 (3S). pp. 667-678. ISSN 1990-7710

Hairulnizam, Hairul Faizi and Misron, Norhisam and Amira Ibrahim, Nur and Ramli, Hafiz Rashidi and Vaithilingam, Chockalingam Aravind (2025) Evaluation of the performance of new type of segmented stator permanent magnet synchronous motor. IEEE Access, 13. pp. 75563-75575. ISSN 2169-3536

Hamat, Sanusi and Ishak, Mohamad Ridzwan and Kelly, Piaras and Salit, Mohd Sapuan and Yidris, Noorfaizal and Ali, Syamir Alihan Showkat and Hussin, Mohd Sabri and Mohd Dawi, Mohd Syedi Imran (2025) Quaternion-based dynamic algorithm for random generation of solid 4D cylindrical curves in RVE modeling. Composites Communications, 58. art. no. 102514. ISSN 2452-2139

Hamat, Sanusi and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Yidris, Noorfaizal and Showkat Ali, Syamir Alihan and Hussin, Mohd Sabri (2025) Effect of polydopamine (PDA) coating on the mechanical, thermal, and morphological properties of recycled polylactic acid (rPLA)/kenaf fiber (KF) composites in Fused Deposition Modeling (FDM). Journal of Materials Research and Technology, 36. pp. 4464-4475. ISSN 2238-7854; eISSN: 2214-0697

Hamid, Rosyati and Mustapha Kamil, Yasmin and Aris, Ahmad Zaharin and Abu Bakar, Muhammad Hafiz and Suhailin, Fariza Hanim and Alresheedi, Mohammed Thamer and Ng, Eng Khoon and Mahdi, Mohd Adzir (2025) Enhanced sensitivity of 17-α-ethinylestradiol (EE2) detection using carbon quantum dots-integrated tapered optical fiber. Applied Sciences (Switzerland), 15 (18). art. no. 9890. pp. 1-20. ISSN 2076-3417

Hamzah, Muhammad Hazwan and Aminudin, Nur Haniem and Hamzah, Adila Fazliyana Aili and Ashari, Rozzamri and Md Ali, Abd Halim and Gavahian, Mohsen and Che Man, Hasfalina and Ying, Goh Sin and Wan Razali, Wan Aizuddin and Al-Sharify, Zainab T. (2025) Towards higher yield and quality of essential oils extracted from lemon myrtle (Backhousia citriodora) leaves via ohmic heated extraction. Journal of Food Measurement and Characterization, 19. pp. 3301-3318. ISSN 2193-4126; eISSN: 2193-4134

Hamzah, Muhammad Hazwan and Anak Surik, Sheralyn Rimba and Aili Hamzah, Adila Fazliyana and Mohd Basri, Mohd Salahuddin and Shamsudin, Rosnah and Mohd Nor, Mohd Zuhair and Md Ali, Abd Halim (2025) Development of novel dabai pulp-based marker ink: optimization of process configurations, physico-chemical properties, and morphological analysis. Biomass Conversion and Biorefinery, 15 (24). pp. 30943-30962. ISSN 2190-6815; eISSN: 2190-6823

Handayani, Vitri Aprilla and Railis, Razan Muhammad and Sunarsono, Hery and Azzahra, Nabila and Iby, Ilham Chayri and Abral, Hairul and Rushdan, Ahmad Ilyas and Salit, Mohd Sapuan and Azka, Muhammad Adlan (2025) Comparison of tensile properties data analyzed using anova and manova methods: case study data of pva-gambir blend film. Pertanika Journal of Science and Technology, 33 (1). pp. 525-530. ISSN 0128-7680; eISSN: 2231-8526

Haohao, Ma and As’arry, Azizan and Chaoqun, Li and Ismail, Mohd Idris Shah and Ramli, Hafiz Rashidi and Delgoshaei, Aidin and Zuhri, M.Y.M. (2025) Improved DBO algorithm tunes fuzzy-PD controller for robot manipulator trajectory tracking. Journal of Algorithms and Computational Technology, 19. ISSN 1748-3018; eISSN: 1748-3026

Haohao, Ma and As’arry, Azizan and Jing, Niu and Ismail, Mohd Idris Shah and Ramli, Hafiz Rashidi and Zuhri, M. Y.M. and Delgoshaei, Aidin (2025) Adaptive force-position-speed collaborative process planning and roughness prediction for robotic polishing. Plos One, 20 (9). art. no. e0330979. pp. 1-32. ISSN 1932-6203

Hashim, Hazwani Suhaila and Fen, Yap Wing and Abdullah, Jaafar and Anuar, Muhammad Fahmi and Sheh Omar, Nur Alia and Liew, Josephine Ying Chyi and Mohd Daniyal, Wan Mohd Ebtisyam Mustaqim and Abdullah, Huda and Taufiq, Ahmad and Mahdi, Mohd Adzir (2025) Femtomolar detection of phenol using surface-modified plasmonic refractive index sensor with sodium carboxymethyl cellulose. Surfaces and Interfaces, 73. art. no. 107463. ISSN 2468-0230

Hawanis, H. S.N. and Shamimimraphay, S. H.R. and Ilyas, R. A. and Jalil, Rafidah and Ibrahim, Rushdan and Zuhri, M. Y.M. and Azriena, H. A.A. and Abdul Majid, Rohah and Fatriasari, Widya (2025) Hybrid alkaline pulping enhances physiochemical, morphological, thermal, and mechanical properties of sugar palm fiber for papermaking. Industrial Crops and Products, 224. art. no. 120307. pp. 1-12. ISSN 0926-6690; eISSN: 0926-6690

Hoon, Yap and Chew, Kuew Wai and Mohd Radzi, Mohd Amran (2025) Integrated I-ADALINE neural network and selective filtering techniques for improved power quality in distorted electrical networks. Symmetry, 17 (8). art. no. 1337. pp. 1-27. ISSN 2073-8994

Huang, Wentao and Yang, Haonan and Wang, Yangfeng and Ding, Phebe and Nawi, Nazmi Mat and Zhang, Xiaoshuan (2025) In-situ precision sensing for smart agriculture using multi-electrode sensor array systems in orchards. Sensors and Actuators A: Physical, 382. art. no. 116134. pp. 1-13. ISSN 0924-4247; eISSN: 0924-4247

Huang, Yang and Sultan, Mohamed Thariq Hameed and Shahar, Farah Syazwani and Nayak, Suhas Yeshwant (2025) Influence of stacking sequence and seawater aging on mechanical, thermal, and viscoelastic properties of hybrid kenaf/flax/glass fiber-reinforced sustainable composites. Journal of Natural Fibers, 23 (1). art. no. 2600508. pp. 1-22. ISSN 1544-0478; eISSN: 1544-046X

Huang, Yang and Sultan, Mohamed Thariq Hameed and Shahar, Farah Syazwani and Nayak, Suhas Yeshwant (2025) Tensile, flexural, and water absorption properties of nano-silica enhanced kenaf/flax/glass fiber-reinforced epoxy hybrid biocomposites for sustainable development. Journal of Natural Fibers, 22 (1). art. no. 2554895. pp. 1-26. ISSN 1544-0478; eISSN: 1544-046X

Humayun Akhter, Syed Md and Naeem, Sajid and Ansari, U. S. and Siddiqui, Vasi Uddin and Bharti, Shambhu Shankar and Ahmad, Shameem and Alam, Md Tanwir and Husain, Dilawar and Patil, A. V. (2025) Green synthesis of metal oxide nanoparticles using plumbago zeylanica root extract, spectrochemical characterization, and antibacterial activity against common pathogen. Applied Research, 4 (1). art. no. e202400200. pp. 1-10. ISSN 2702-4288

Husin, Nur Azuan and Bejo, Siti Khairunniza and Md Noh, Normahnani and Ridu, Ray Clement (2025) Growth monitoring of healthy and BSR-infected oil palm seedlings using ground-based LiDAR. Pertanika Journal of Science and Technology, 33 (3). pp. 1137-1158. ISSN 0128-7680; eISSN: 2231-8526

Hussain, Zakia and Gopalai, Alpha Agape and Ahmad, Siti Anom and Salim, Mazatulfazura Sf and Gouwanda, Darwin and Teh, Pei Lee (2025) Investigating age-related muscle force adaptations in males and females during sit-to-walk transition motion using EMG-informed modeling. Results in Engineering, 26. art. no. 104660. pp. 1-20. ISSN 2590-1230

Hussein, Hussein A. M and Abdul Rahim, Sharafiz and Mustapha, Faizal B. and Krishnan, Prajindra S. and Abdul Jalil, Nawal Aswan (2025) Data-driven multi-fault detection in pipelines utilizing frequency response function and artificial neural networks. Journal of Pipeline Science and Engineering, 5 (1). art. no. 100223. pp. 1-15. ISSN 2667-1433

Hussein, Hussein A. M. and Abdul Rahim, Sharafiz and Mustapha, Faizal and Krishnan, Prajindra S. (2025) Safeguarding pipeline integrity through stacked ensemble learning and data fusion. International Journal of Mechanical System Dynamics, 5 (1). pp. 129-140. ISSN 2767-1399; eISSN: 2767-1402

Ibrahim, Izzudin and Ahmad Farid, Mohammed Abdillah and Andou, Yoshito (2025) Novel one-step dilute acid-assisted hydrothermal delignification using dilute HNO3 for facile high-purity cellulose extraction from oil palm fronds (OPF). Biomass and Bioenergy, 198 (undefined). art. no. 107862. undefined-undefined. ISSN 0961-9534; eISSN: 1873-2909

Ibrahim, M. S. and Sulaiman, M. H. and Ismail, M. I.S. and Yaakob, Y. and Ridzuan, M. J.M. (2025) Water-based lubricants formulated with hybrid MXene and ionic liquid additives: effects of carboxylmethyl cellulose and xanthan gum surfactants on dispersion stability, viscosity, interface temperature and tribological performance. Journal of Molecular Liquids, 430. art. no. 127817. pp. 1-10. ISSN 0167-7322

Ibrahim, Muhammad Shuhaimi and Sulaiman, Mohd Hafis and Ismail, Mohd Idris Shah (2025) Influence of oil-based and water-based lubrication on tool wear of DLC/TiAlN-coated punches in blanking of stainless steel. Jurnal Tribologi, 44. pp. 137-149. ISSN 2289-7232

Ibrahim, Nur Amira and Misron, Norhisam and Hairulnizam, Hairul Faizi and Vaithilingam, Chockalingam Aravind and Nashiren, Farzilah Mailah and Aris, Ishak (2025) Effect of coil diameter on the performance of interior and embedded permanent magnet for double-stator generator. Pertanika Journal of Science and Technology, 33 (S4). pp. 45-55. ISSN 0128-7680; eISSN: 2231-8526

Ibrahim, Nur Shahidatul Nabila and Suppiah, Subapriya and Ibrahim, Buhari and Mohad Azmi, Nur Hafizah and Seriramulu, Vengkatha Priya and Mohamad, Mazlyfarina and Hanafi, Marsyita and Mohammad Sallehuddin, Hakimah and Omar Sharif, Nurallysha Najwa and Razali, Rizah Mazzuin and Harrun, Noor Harzana (2025) Comparing deep learning CNN method with traditional MRI-based hippocampal segmentation and volumetry for early Alzheimer’s disease diagnosis across diverse populations. Scientific Reports, 16 (1). art. no. 58. pp. 1-11. ISSN 2045-2322

Ijaz Malik, Muhammad Ali and Ikram, Adeel and Zeeshan, Sadaf and Naqvi, Muhammad and Raza Zahidi, Syed Qasim and Hussain, Fayaz and Yassin, Hayati and Qazi, Atika (2025) Enhancing peak performance forecasting in steam power plants through innovative AI-driven exergy-energy analysis. Energy Conversion and Management: X, 26. art. no. 101025. ISSN 2590-1745

Iskandar Syah, Nur Izzah Nadiah and Md Said, Mohamad Syazarudin (2025) Effects of Flame Retardant Additives on Fire Properties of Paraffin Impregnated Gypsum. Energy Storage, 7 (4). art. no. e70201. ISSN 2578-4862

Islam, Syed Zahurul and Kamarudin, Muhammad Saufi and Abdullah, Mohd Noor and Mohaffyza, Mimi and Sern, Lai Chee and Othman, Mohammad Lutfi and Uddin, Jasim (2025) Sustainable smart irrigation system (SIS) using solar PV with rainwater harvesting technique for indoor plants. PLoS ONE, 20 (3). art. no. e0316911. pp. 1-30. ISSN 1932-6203

Ismail, Amer Aref Said and Agustin, Yuana Elly and Yeow, Teck Ann and Baishan, Fang and Jamali, Nur Syakina and Yeap, Swee Keong and Silvamany, Hemavathi and Chee, Tan Peng and Ping, Tan Jian (2025) Sustainable biological production and innovative purification of the 1,3-propanediol from glycerol fermentation broth via resin adsorption. Food and Bioproducts Processing, 149. pp. 100-111. ISSN 0960-3085; eISSN: 0960-3085

Ismail, Nurhazwani and Zainal Abidin, Zurina and Talip, Farah Saleena and Muhammad Fairuz, Nur Aqilah and Ahmed Hassan, Mohamednageib and Yunus, Robiah (2025) Spray dried powder biocoagulant from Jatropha curcas liquid extract and its preliminary assessment in turbidity removal. Journal of Applied Science and Engineering, 29 (4). pp. 749-764. ISSN 2708-9967; eISSN: 2708-9975

Ismail, Siti Amni and Yahya, Azmi and Su, Ahmad Suhaizi Mat and Mustafah, Anas Mohd and Asib, Norhayu (2025) Influence of Unmanned Aerial Vehicle (UAV) payloads and flight speeds on pesticide droplet deposition: indoor testing rig study. ASEAN Journal on Science and Technology for Development, 43 (1). pp. 167-176. ISSN 0217-5460; eISSN: 2224-9028

Isnan, Sarah and Abdullah, Ahmad Fikri and Shariff, Abdul Rashid and Ishak, Iskandar and Syed Ismail, Sharifah Norkhadijah and Appanan, Maheshwara Rao (2025) Moran’s I and Geary’s C: investigation of the effects of spatial weight matrices for assessing the distribution of infectious diseases. Geospatial Health, 20 (1). art. no. 1277. pp. 1-9. ISSN 1827-1987; eISSN: 1970-7096

Jaman, Khairina and Idrus, Syazwani and Harun, Razif and Nik Daud, Nik Norsyahariati and Rehan, Balqis Mohamed and Ahsan, Amimul and Zamrisham, Ain Fitriah (2025) From macrostructure to machine learning: Lava rock as a superior carrier in anaerobic co-digestion of manure and molasses residue. Biochemical Engineering Journal, 224. art. no. 109904. ISSN 1369-703X; eISSN: 1873-295X

Jathar, Laxmikant D. and Meherunnesa and Shelare, Sagar and Shahapurkar, Kiran and Abedin, Tarek and Farade, Rizwan A. and Rajabi, Armin and Khan, T. M. Yunus and Singh, Ramesh and Cuce, Erdem and Nur-E-Alam, Mohammad (2025) A short review on nano-additives to enhance biodiesel performance in diesel engines. Journal of Thermal Science, 34 (4). pp. 1450-1473. ISSN 1003-2169; eISSN: 1993-033X

Jia, Pengfei and Mohd Shafri, Helmi Zulhaidi and Yu, Shengrui and Zheng, Zhi and You, Shiqing and Mohamed Shariff, Abdul Rashid (2025) Radar-optical fusion of Sentinel-1/2 for high-resolution NDVI reconstruction and landscape-driven carbon flux assessment in Kuala Selangor, Malaysia (2020–2024). International Journal of Applied Earth Observation and Geoinformation, 145. art. no. 104966. pp. 1-20. ISSN 1569-8432; eISSN: 1872-826X

Jimoh, Kabiru Ayobami and Hashim, Norhashila and Shamsudin, Rosnah and Che Man, Hasfalina and Jahari, Mahirah (2025) Assessment of performance and quality indices of glutinous rice under different drying methods. Sustainable Energy Technologies and Assessments, 73. art. no. 104161. pp. 1-10. ISSN 2213-1388; eISSN: 2213-1388

Jimoh, Kabiru Ayobami and Hashim, Norhashila and Shamsudin, Rosnah and Che Man, Hasfalina and Jahari, Mahirah (2025) Development of near-infrared hyperspectral-based smart interface for glutinous rice quality detection. Food Control, 174. art. no. 111252. pp. 1-9. ISSN 0956-7135

Jimoh, Kabiru Ayobami and Hashim, Norhashila and Shamsudin, Rosnah and Che Man, Hasfalina and Jahari, Mahirah (2025) Rapid and non-destructive monitoring of the drying process of glutinous rice using visible-near infrared hyperspectral imaging. Applied Food Research, 5 (1). art. no. 100955. pp. 1-14. ISSN 2772-5022

Jimoh, Kabiru Ayobami and Hashim, Norhashila and Shamsudin, Rosnah and Che Man, Hasfalina and Jahari, Mahirah and Megat Ahmad Azman, Puteri Nurain and Onwude, Daniel I. (2025) Hyperspectral imaging for detection of macronutrients retained in glutinous rice under different drying conditions. Current Research in Food Science, 10. art. no. 100963. pp. 1-12. ISSN 2665-9271

Junjia, Yin and Jiawen, Liu and Alias, Aidi Hizami and Haron, Nuzul Azam and Abu Bakar, Nabilah (2025) Reinforcement learning in risk management for pharmaceutical construction projects: frontiers, challenges, and improvement strategies. Sustainable Futures, 10. art. no. 101534. pp. 1-18. ISSN 2666-1888

Junto, Apiwat and Phanomsophon, Thitima and Sharma, Sneha and Kaewsorn, Kannapot and Jongyingcharoen, Jiraporn Sripinyowanich and Sirisomboon, Cheewanun Dachoupakan and Rerngsamran, Panan and Sirisomboon, Panmanas and Pornchaloempong, Pimpen and Hashim, Norhashila and Chongstitvatana, Prabhas and Terdwongworakul, Anupun (2025) Postharvest detection of anthracnose (Colletotrichum asianum) on mango fruit (Mangifera indica L. cv Namdokmai Sithong) using near-infrared response. BMC Plant Biology, 26 (1). art. no. 136. pp. 1-13. ISSN 1471-2229

Kadhum, Safaa A. and Hussain, Lujain Ibrahim and Azeez, Omer Saud and Abed, Salwan Ali and Jaafar, Ban Ibrahim (2025) The burden of air quality in neighborhoods near oil fields: an alarm for public health in Basra city, Iraq. Bulletin of Atmospheric Science and Technology, 6 (1). art. no. 1. undefined-undefined. ISSN 2662-1495; eISSN: 2662-1509

Kamal, Md Rowshon and Mojid, Md Abdul and Mousumi, Khadiza Akter and Iqbal, Mazhar (2025) Evaluating water productivity by tracking the elements of paddy field water balance. Journal of Irrigation and Drainage Engineering, 151 (5). art. no. 04025031. ISSN 0733-9437; eISSN: 1943-4774

Kamalaksha, Shenoy Adithya and Kumar, Abhishek and Marneni, Rithvik and Ahmad, Kamarul Arifin and Singh, Spoorthi and Dol, Sharul Sham (2025) Fluid-dynamic and structural optimization of a suction-enabled autonomous grass-cutter robot. Results in Engineering, 27. art. no. 106445. ISSN 2590-1230

Kambakhsh, Hamasa and Nik Daud, Nik Norsyahariati and Idrus, Syazwani (2025) The thermal stability and morphological study of weathered and intact limestone. Warta Geologi, 51 (2). pp. 163-176. ISSN 2682-7549

Kamil, Saif Shaheen and Nabilah, Abu Bakar and Abd Karim, Izian and Alias, Aidi Hizami and Mohd Tohir, Mohd Zahirasri (2025) Seismic performance and fragility assessment of masonry infilled RC frames using a numerical approach. Bulletin of Earthquake Engineering, 23 (15). pp. 6801-6828. ISSN 1570-761X; eISSN: 1573-1456

Kamil Kayode, Katibi and Azis, Rabaah Syahidah and Garba Shitu, Ibrahim and Ismail, Ismayadi and Soo Kien, Chen and Kean Pah, Lim and Awang Kechik, Mohd Mustafa and Md Yunos, Khairul Faezah and Abdulhameed Amusa, Abiodun (2025) Tuning synthesis temperature spectrum to unlock multifunctional potential in multi-walled carbon nanotubes for EMI shielding and optical applications. Journal of Industrial and Engineering Chemistry, 146. pp. 826-852. ISSN 1226-086X

Karunakaran, Sivasanghari and Abang Abdul Majid, Dayang Laila (2025) Induction heating method for thermomechanical study of NiTi shape memory alloy wire. Journal of Aeronautics, Astronautics and Aviation, 57 (3S). pp. 593-603. ISSN 1990-7710

Kathayat, Arjun and Baharudin, Mohd Rafee and Lee, Wilson Wui Siang and Mohd Tohir, Mohd Zahirasri (2025) OSH risk management policies between North America and Southeast Asia—a comparative review. Frontiers in Public Health, 13. art. no. 1642941. pp. 1-17. ISSN 2296-2565

Katibi, Kamil Kayode and Mutalovich, Azimov Abdugani and Nawi, Nazmi Mat and Iztleuov, Gani M. and Sataev, Marat I. and Mohd Nasir, Muhammad Adib (2025) An insight into real-time monitoring and predictive modelling of ultrafiltration pretreatment for flow rate and fouling mitigation in seawater desalination. Desalination and Water Treatment, 323. art. no. 101386. pp. 1-11. ISSN 1944-3994; eISSN: 1944-3986

Kazeem, Muinat Olanike and Abbasiliasi, Sahar and Shun, Tan Joo and Baharuddin, Azhari Samsu and Abdul Rahman, Nor’ Aini (2025) Primary recovery of carboxymethyl cellulase from Thermophilic Bacillus licheniformis 2d55 using an aqueous two-phase system. Pertanika Journal of Science and Technology, 33 (1). pp. 1-19. ISSN 0128-7680; eISSN: 2231-8526

Khairulazman, Nurul Afiffah and Jelani, Jestin and Suif, Zuliziana and Umor, Mohd Rozi and Azmi, Nur Anati and Md Yusof, Zainuddin and Ahmad, Nordila and Abd Halim, Abd Akram Haikal and Rosle, Qalam A’Zad (2025) Mineralogical analysis of plutonic and volcanic rocks at selected slope sections of the Kuala Lumpur-Karak Highway. Sinergi (Indonesia), 29 (1). pp. 259-267. ISSN 1410-2331; eISSN: 2460-1217

Khalaf, Qasim M. and Sali, Aduwati and Ismail, Alyani and Ahmad, Mohd Yazed and Soubhi Hussein, Yaseein and Ali Shah, Jawad (2025) Enhancing SWIPT systems: a systematic review of rectifier technologies, efficiency, and integration strategies. IEEE Access, 13. pp. 201802-201831. ISSN 2169-3536

Khalid, Asma and Dahlan, Nur Dalilah and Abas, Mohd Firdaus and Ahmad, Kamarul Arifin and Shahidan, Mohd Fairuz (2025) The impact of wind catchers on thermal comfort and indoor air quality: An analysis of subtropical climate for summer and winter. Indoor and Built Environment, 34 (4). art. no. 4. pp. 838-867. ISSN 1420-326X; eISSN: 1423-0070

Khalid, Haqi and Hashim, Shaiful Jahari and Abdulsaheb, Jaafar Ahmed (2025) KAYANGAN: lightweight authentication and key agreement scheme using HPKE for 6G Non-Terrestrial Networks. Ain Shams Engineering Journal, 17 (1). art. no. 103839. pp. 1-14. ISSN 2090-4479

Khaliquzzama, M. A. and Masuri, S. U. and Saidur, R. and Hairuddin, Abdul Aziz and Mohd Tahir, Suraya and Abd Malek, Norhazwani (2025) Heat transfer analysis of molten salt nitrates inside shell and tube heat exchanger with small round holed segmental baffles for concentrated solar power. International Journal of Heat and Fluid Flow, 116 (undefined). art. no. 109916. undefined-undefined. ISSN 0142-727X

Khan, Abdul Rehman and Ab Razak, Mohd Shahrizal and Yusuf, Badronnisa and Mohd Shafri, Helmi Zulhaidi and Mohamad, Noorasiah (2025) Harnessing artificial neural networks for coastal erosion prediction: a systematic review. Marine Policy, 178. art. no. 106704. ISSN 0308-597X; eISSN: 1872-9460

Khan, Abir and Sapuan, S.M. and Zainudin, E.S. and Zuhri, M.Y.M. (2025) Bamboo-kenaf fibers reinforced PLA composites: Enhancing moisture control, surface wettability, and flame resistance for eco-friendly packaging and furniture. Biomass and Bioenergy, 200. art. no. 108030. ISSN 0961-9534; eISSN: 1873-2909

Khan, Rizwanullah and Mohd Yousof, Mohd Fairouz and Abd Rahman, Rahisham and Azis, Norhafiz and Al-Ameri, Salem and Ali, Asjad (2025) Broken rotor bar detection of three phase induction motor using frequency response analysis. International Journal of Electrical and Computer Engineering, 15 (2). pp. 1289-1296. ISSN 2088-8708; eISSN: 2722-2578

Khawka, Zeyad Mustafa Hamed and Abd Rahman, Azmawani and Sidek, Shafie and Ahmed, Siti Azfanizam and Al-Hadeethi, Rami Hikmat Fouad (2025) Trim the fat, gain the edge: lean supply chain activities for cost reduction and competitive advantage. Journal of Open Innovation: Technology, Market, and Complexity, 11 (3). art. no. 100579. pp. 1-19. ISSN 2199-8531

Khurshid, Z.M. and Ab Kadir, M. Z. A. and Ab Aziz, N. F. and Rhazali, Z.A. and Azis, N. (2025) Harmonic distortion analysis in power system due to geomagnetically induced currents. Electric Power Systems Research, 247. art. no. 111831. ISSN 0378-7796; eISSN: 1873-2046

Kobbin, Kiishhen and Peter, Angela Paul and Mohd Nor, Mohd Zuhair and Show, Pau Loke (2025) Liquid biphasic flotation system (LBFS) for separation of protein from Azolla pinnata. Pertanika Journal of Science and Technology, 33 (S5). pp. 59-74. ISSN 0128-7680; eISSN: 2231-8526

Kodigaddi, Siddalingappa Parameshappa and Venkataramana, Srikanth Holalu and Natesan, Kapilan and Mazlan, Norkhairunnisa (2025) Experimental investigation on a Trailing Edge Morphing Airfoil (TEMA) with zigzag rib structure at low speed. Pertanika Journal of Science and Technology, 33 (1). pp. 195-217. ISSN 0128-7680; eISSN: 2231-8526

Kong, Y. L. and Leong, M. Y. and Harun, M. Y. and Wong, W. F. and Looi, C. Y. (2025) Characterization of crosslinked nanocellulose from oil palm frond fibers for enhanced drug-loaded hydrogels in antibacterial application. Materials Letters, 401 (undefined). art. no. 139209. undefined-undefined. ISSN 0167-577X; eISSN: 1873-4979

Kuan, Shuping and Chin, Nyuk Ling and Tee, Tuan Poy and Noor Hasnan, Noor Zafira (2025) Microbiome diversity in seafood factories via next-generation sequencing for food safety management system (FSMS) certifications in Malaysia. Foods, 14 (9). art. no. 1517. pp. 1-23. ISSN 2304-8158

Lang, Yiming and Ng, Michelle Xin Yi and Yu, Kai Xiang and Chen, Binghui and Tan, Peng Chee and Tan, Khang Wei and Lam, Weng Hoong and Siwayanan, Parthiban and Kim, Kek Seong and Choong, Thomas Shean Yaw and Ten, Joon Yoon and Ban, Zhen Hong (2025) A novel CFD-MILP-ANN approach for optimizing sensor placement, number, and source localization in large-scale gas dispersion from unknown locations. Digital Chemical Engineering, 14. art. no. 100216. pp. 1-22. ISSN 2772-5081; eISSN: 2772-5081

Law, Teik Hua and Yang, Kun (2025) Urbanization and electric vehicle adoption: exploring direct and indirect economic growth-mediated pathways. Transportation Research Part D: Transport and Environment, 149. art. no. 105061. pp. 1-16. ISSN 1361-9209

Law, Teik Hua and Yang, Kun and Zhu, Tong and Mohd Jakarni, Fauzan (2025) Child road safety in transition: how economic growth shapes fatality risks for pedestrians, cyclists, and motorists. Social Science and Medicine, 388. art. no. 118771. pp. 1-14. ISSN 0277-9536; eISSN: 1873-5347 (In Press)

Lawal, Ismail and Shafie, Suhaidi and Pandey, Shyam S. and Jafaar, Haslina and Mustafa, Mohd Amrallah and Abdulmalik, Ibrahim Onuwe and Ismail, Ismayadi and Kamarudin, Mazliana Ahmad and Mohd Noor, Ikhwan Syafiq and Ahmad, Fauzan and Liu, Xinzhi (2025) The effect of Titanium (IV) chloride surface treatment and titanium dioxide/graphenated carbon nano-tube composite photoanode to enhance charge transport and light harvesting of bifacial dye-sensitized solar cell. Solar Energy, 294 (undefined). art. no. 113495. undefined-undefined. ISSN 0038-092X

Lawal, Ismail and Shafie, Suhaidi and Pandey, Shyam S. and Jafaar, Haslina and Mustafa, Mohd Amrallah and Ismail, Ismayadi and Ahmad Kamarudin, Mazliana and Mohd Noor, Ikhwan Syafiq and Liu, Xinzhi and AlSultan, Hussein A. and Babani, Suleiman and Abdulhamid, Ibrahim Bako and Norddin, Nurbahirah (2025) Maximizing solar energy harvesting: enhancing the efficiency of bifacial dye-sensitized solar cells with Graphenated carbon nanotubes composites in multi-layered stacked photoanode. Optical Materials, 160. art. no. 116721. pp. 1-11. ISSN 0925-3467 (In Press)

Lee, Chuan Li and A. Bakar, Balkis Fatomer and Chin, Kit Ling and Abdullah, Luqman Chuah and Idris, Nurul Izzaty and Chang, Qi Ren (2025) Dual tuning effect of epoxy-to-curing agent ratio and PKS-based activated carbon loading on the mechanical and self-healing performance of epoxy vitrimer composites. Polymer Engineering and Science, 66 (2). pp. 1199-1219. ISSN 0032-3888; eISSN: 1548-2634

Lee, Fabian and Hashim, Shaiful and Kamsani, Noor’ain and Rokhani, Fakhrul and Misron, Norhisam (2025) APMEG: quadratic time–frequency distribution analysis of energy concentration features for unveiling reliable diagnostic precursors in global major earthquakes towards short-term prediction. Applied Sciences (Switzerland), 15 (17). art. no. 9325. pp. 1-21. ISSN 2076-3417

Lee, Fatimah and Abdullah, Luqman Chuah and Ramli, Irmawati and Shamsuri, Ahmad Adlie and Daik, Rusli and Mohd Noor, Ikhwan Syafiq and Md Jamil, Siti Nurul Ain (2025) Biogenic fabrication of S-scheme NiO–FeWO4 heterojunction nanocomposite using Cassava (Manihot esculenta Crantz) leaf extract for visible-light-driven dye degradation: synthesis, characterisation and photocatalytic evaluation. Ceramics International, 51 (29). pp. 60217-60233. ISSN 0272-8842

Lee, Fatimah and Md Jamil, Siti Nurul Ain and Subri, Nur Nida Syamimi and Adeyi, Abel Adekanmi and Daik, Rusli (2025) Sequestration of doxycycline and mefenamic acid from liquid phase using 1,3-diaminopropane modified poly(acrylonitrile-acrylic acid): isotherm, kinetic and mechanism studies. Sains Malaysiana, 54 (1). art. no. undefined. pp. 3687-3704. ISSN 0126-6039

Lee, X.F. and Naim, M.N. and M. Azmi, N.S. and Mohammed, M.A.P. and Othman, S.H. and Abu Bakar, N.F. and Adam, F. (2025) Dynamic modelling of oil and water molecules of methylcellulose-coated fried potato during and in the post-frying condition. Food Research, 9 (3). pp. 67-75. ISSN 2550-2166

Leong, Nathaniel and Chong, Chou Min and Christianus, Annie and Zan, Zuraidah and Alresheedi, Mohammed Thamer and Mohd Yusoff, Norita and Yaacob, Mohd Hanif and Mahdi, Mohd Adzir (2025) Surfactant-free gold nanostars as a colloidal substrate for the surface-enhanced Raman spectroscopy of grouper epidermal mucus. Nanotechnology, 36 (43). art. no. 435501. pp. 1-14. ISSN 0957-4484; eISSN: 1361-6528

Leong, Nathaniel and Mujar, Ellia Kartini and Mazlan, Aini Nadia and Chong, Chou Min and Christianus, Annie and Alresheedi, Mohammed Thamer and Ng, Eng Khoon and Yaacob, Mohd Hanif and Mahdi, Mohd Adzir (2025) Discrimination of hypoxia tolerant and intolerant hybrid groupers using surface-enhanced Raman spectroscopy of epidermal mucus. Aquaculture, 598. art. no. 742014. pp. 1-8. ISSN 0044-8486; eISSN: 0044-8486

Li, Jingjing and Lee, Ching Hung and Duan, Dingna and Zhou, Yanhong and Xie, Xueguang and Wan, Xianglong and Liu, Tiange and Li, Danyang and Yu, Hao and Hasan, W. Z.W. and Song, Haiqing and Wen, Dong (2025) A novel AI-driven EEG images emotion recognition generalized classification model for cross-subject analysis. Advanced Engineering Informatics, 68 (undefined). art. no. 103744. undefined-undefined. ISSN 1474-0346

Li, Jinglong and Che Me, Rosalam and Ahmad, Faisul Arif and Zhu, Qisen (2025) Development and validation of an ageing-oriented smart products design framework based on technology acceptance model (TAM). Disability and Rehabilitation: Assistive Technology. pp. 1-27. ISSN 1748-3107; eISSN: 1748-3115

Liang, Jing Teh and Su, Luan Wong and Md Khambari, Mas Nida and O. K. Rahmat, Rahmita Wirza and Sai, Hong Tang (2025) Exploring postgraduate students’ experience with rubric-referenced assessment: limitations and solutions. Pertanika Journal of Social Sciences and Humanities, 33 (2). pp. 541-562. ISSN 0128-7702; eISSN: 2231-8534

Lim, Zhi Yang and Azis, Norhafiz and Mohd Hashim, Ahmad Hafiz and Mohd Radzi, Mohd Amran and Norsahperi, Nor Mohd Haziq and Mohd Ariffin, Azrul (2025) Acoustic emission partial discharge localization in oil based on artificial bee colony. Pertanika Journal of Science and Technology, 33 (1). pp. 241-259. ISSN 0128-7680; eISSN: 2231-8526

Liu, Junchen and Ahmad, Faisul Arif and Samsudin, Khairulmizam and Hashim, Fazirulhisyam and Ab Kadir, Mohd Zainal Abidin (2025) Optimizing deep residual networks for short-term load forecasting with multidimensional weather data and principal component analysis. IEEE Access, 13. pp. 158614-158631. ISSN 2169-3536

Liu, Yijun and Mustafa, Mohd Shafie and Saripan, M Iqbal and Kamel Ariffin, Muhammad Rezal and Wan, Xianglong and Dong, Xianling and Lan, Xifa and Wen, Dong (2025) Task-state EEG feature extraction for spatial cognition analysis: a power spectral density and permutation conditional mutual information approach. Neuroscience, 580. pp. 383-393. ISSN 0306-4522; eISSN: 1873-7544

Long, Liu and Junjia, Yin and Jiao, Wang and Alias, Aidi Hizami and Haron, Nuzul Azam and Abu Bakar, Nabilah (2025) Urban flood resilience evaluation in China: a systematic review of frameworks, methods, and limitations. Geomatics, Natural Hazards and Risk, 16 (1). art. no. 2445631. pp. 1-30. ISSN 1947-5705; eISSN: 1947-5713

Loughlan, J. and Yidris, N. B. (2025) Thin-walled single and multi-cell CFRP composite tubes in uniform torsion–Local shear and distortional-torsional instability. Thin-Walled Structures, 210. art. no. 112998. pp. 1-14. ISSN 0263-8231

Lyu, Shiqi and Zainal Abidin, Zurina and Shean Yaw, Thomas Choong and Mukhtar Gunam Resul, Mohamad Faiz (2025) Solar-enhanced capture of aquatic uranium and organic pollutants with high efficiency using functionalized porous carbon nanotubes modified polysulfides. Separation and Purification Technology, 373 (undefined). art. no. 133619. undefined-undefined. ISSN 1383-5866; eISSN: 1873-3794

M. S., N. Atikah and Harun, Razif and Ilyas, R. A. and Norrrahim, Mohd Nor Faiz and Knight, Victor Feizal (2025) Algae cultivation systems integrated with photovoltaic cell: a systematic review. Results in Engineering, 27. art. no. 106294. pp. 1-13. ISSN 2590-1230

M.V., Eashwar and T., Nivetha and B., Bindu and Kamsani, Noor Ain (2025) Spiking neural network circuit with op-amp based LIF neuron and RRAM synaptic array. AEU - International Journal of Electronics and Communications, 201 (undefined). art. no. 156004. undefined-undefined. ISSN 1434-8411; eISSN: 1618-0399

Ma, Ziwei and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Azis, Norhafiz and Ma, Yanhua (2025) Improved electrogeometric model for shielding failure evaluation of double-circuit UHVAC transmission lines based on leader propagation simulations. Electric Power Systems Research, 239. art. no. 111240. pp. 1-12. ISSN 0378-7796; eISSN: 0378-7796

Maad, Hikmat and Mohd Yusoff, Norita and Ahmad Anas, Siti Barirah and Mokhtar, Makhfudzah and Mahdi, Mohd Adzir and Zan, Zuraidah (2025) Noise-like pulse generation in erbium-doped fiber laser by hybrid mode-locking of graded index multimode fiber and nonlinear optical loop mirror. Optical Fiber Technology, 93. art. no. 104285. pp. 1-11. ISSN 1068-5200; eISSN: 1068-5200

Mahamad, Siti Syazwani and Mohamed, Mohd Shamzi and Radzuan, Mohd Nazren and Winterburn, James and Zakaria, Mohd Rafein (2025) Bioreactor scale-up on rhamnolipid production by Pseudomonas aeruginosa RS6 based on constant impeller tip speed. Systems Microbiology and Biomanufacturing, 6 (1). art. no. 20. pp. 1-16. ISSN 2662-7655; eISSN: 2662-7663

Mahamad, Siti Syazwani and Mohamed, Mohd Shamzi and Radzuan, Mohd Nazren and Winterburn, James and Zakaria, Mohd Rafein (2025) Optimizing rhamnolipid bio-surfactant production in a bioreactor using waste glycerol. Bioprocess and Biosystems Engineering, 48 (12). pp. 1999-2016. ISSN 1615-7591; eISSN: 1615-7605

Mahardika, Melbi and Jatul Fitri, Manda Vais and Kusumastuti, Yuni and Suryanegara, Lisman and Fitriani, . and Amelia, Devita and Holilah, . and Sapuan, S.M. and Siddiqui, Vasi Uddin and Mohamad Haafiz, M.K. (2025) Effect of plasticizer on biodegradability, physical, and morphological properties of κ-carrageenan biopolymer films. Biomass and Bioenergy, 201. art. no. 108096. ISSN 0961-9534; eISSN: 1873-2909

Mahzan, Najwa Nasuha and Lutfi Othman, Mohammad and Izzri Abdul Wahab, Noor and Veerasamy, Veerapandiyan and Salim, Nur Ashida and Azwin Zainul Abidin, Aidil and Zahurul Islam, Syed (2025) Performance analysis of intelligent classifiers for high impedance fault detection in a PV-integrated IEEE-13 bus system. IEEE Canadian Journal of Electrical and Computer Engineering, 48 (2). art. no. https://ieeexplore.ieee.org/document/10970376. pp. 98-108. ISSN 2694-1783

Makhtar, Siti Noormiza and Mohd Sani, Fareisya Zulaikha and Nor, Elya Mohd and Kamarudin, Nur Diyana and Md Ali, Syaril Azrad (2025) Faulty classification system for VTOL UAV acoustic signal using machine learning. Jurnal Kejuruteraan, 37 (3). pp. 1495-1503. ISSN 0128-0198; eISSN: 2289-7526

Mansor, M. and Zainol Abidin, N.H. and Liew, J.Y.C. and Md Zain, A.R. and Alresheedi, M.T. and Ng, E.K. and Mahdi, M.A. (2025) Methylammonium bismuth bromide perovskite single crystal growth and its application as saturable absorber for mode-locked fiber laser. Optical Materials, 166. art. no. 117212. ISSN 0925-3467; eISSN: 1873-1252

Masalha, Ismail and Alahmer, Ali and Badran, Omar and Al-Khawaldeh, Mustafa Awwad and Masuri, Siti Ujila and Maaitah, Hussein (2025) Proactive thermal management of photovoltaic systems using nanofluid cooling and advanced machine learning models. Journal of Thermal Analysis and Calorimetry, 150 (21). pp. 17529-17570. ISSN 1388-6150; eISSN: 1588-2926

Masalha, Ismail and Masuri, Siti Ujila and Badran, Omar and Alahmer, Ali (2025) A multi-method approach to investigating porous media cooling for enhanced thermal performance of photovoltaic panels: exploring the effects of porosity, flow rates, channel design, and coolant types. International Journal of Thermofluids, 27. art. no. 101165. pp. 1-26. ISSN 2666-2027

Mat Zain, Nur Amirah and Mokhtar, Mardiha and Daud, Mohd Effendi and Hamid, Nor Baizura and Abdul Rahman, Mohammad Ashraf and Ab Razak, Mohd Shahrizal (2025) Assessment of longshore sediment transport rate using the CERC formula along the Batu Pahat coast, Malaysia. International Journal of Design and Nature and Ecodynamics, 20 (10). pp. 2223-2232. ISSN 1755-7437; eISSN: 1755-7445

Matusin, Saleema and Mujar, Ellia Kartini and Christianus, Annie and Ariffin, Norazrin and Salleh, Annas and Low, Chen Fei and Chong, Chou Min and Md Yasin, Ina Salwany and Abu Bakar, Muhammad Hafiz and Esa, Yuzine and Kua, Beng Chu (2025) Temperature stress alters transcriptomic and physiological responses in hybrid grouper (Epinephelus fuscoguttatus × Epinephelus lanceolatus). Aquaculture and Fisheries. pp. 1-21. ISSN 2096-1758; eISSN: 2468-550X (In Press)

Md Hafiz, Nur Fatinah and Mashohor, Syamsiah and Mohd Azrul Shazril, Mohammad Habib Shah Ershad and Mohd Ali, Azizi and A. Rasid, Mohd Fadlee . (2025) Machine learning framework for industrial machine sound classification in predictive maintenance. IEEE Access, 13. pp. 154960-154975. ISSN 2169-3536

Md Sam, Nor Syahidah and Krishnen, Ganisan and Baharulrazi, Norfhairna and Abdullah, Luqman Chuah and Abdul Majid, Rohah (2025) Effect of composite technologies on the mechanical properties and biodegradability of agricultural polymeric materials. Pertanika Journal of Science and Technology, 33 (S5). pp. 75-107. ISSN 0128-7680; eISSN: 2231-8526

Md Sam, Nor Syahidah and Krishnen, Ganisan and Baharulrazi, Norfhairna and Abdullah, Luqman Chuah and Majid, Rohah A. (2025) Toward eco-friendly fertilizers: modulating nutrient release from biopolyurethane coatings by adjusting isocyanate index and polyol percentage. Environmental Quality Management, 34 (4). art. no. e70072. pp. 1-15. ISSN 1088-1913; eISSN: 1520-6483

Megat Ahmad Azman, Puteri Nurain and Shamsudin, Rosnah and Hashim, Norhashila and Che Man, Hasfalina (2025) Kinetics of dimensional changes in glutinous rice at different rice-water ratio and soaking time. Journal of Engineering and Sustainable Development, 29 (3). pp. 289-296. ISSN 2520-0917; eISSN: 2520-0925

Mittal, Anirudh Krishna and Corda, John Valerian and Mathias, Kevin Amith and Abdul Khader, Shah Mohammed and Barboza, Augustine B.V. and Ahmad, Kamarul Arifin and Zuber, Mohammad and Shenoy, Gowrava (2025) Study of airflow dynamics and particle transport in the upper respiratory system using numerical simulation. CFD Letters, 17 (6). art. no. undefined. pp. 171-188. ISSN 2180-1363

Mohamad, Azizah and Tan, Chun Keat and Abdul Karim Shah, Nor Nadiah and Nayan, Nazri and Ibrahim, Ahmad and Abdi, Gholamreza and Muhammad Aadil, Rana (2025) Insect protein: a pathway to sustainable protein supply chains, challenges, and prospects. Journal of Agriculture and Food Research, 19. art. no. 101678. pp. 1-10. ISSN 2666-1543

Mohamad, R. and Idrus, S. M. and Abuajwa, O. and Yusoff, Z. and Yaakob, S. and Ja'afar, P. N. (2025) Real-world quality of service (QoS) performance in Radio over Fiber (RoF) networks: experimental testbed. Optical Fiber Technology, 93. art. no. 104223. pp. 1-15. ISSN 1068-5200

Mohamad, Shahril and Abdullah, Luqman Chuah and Jamari, Saidatul Shima and Sy Mohamad, Sharifah Fathiyah (2025) Remediation of the oil palm frond juice base medium via efficient pretreatment and dilution factor strategy for bacterial cellulose production yield enhancement. International Journal of Biological Macromolecules, 311 (pt.3). art. no. 143744. pp. 1-11. ISSN 0141-8130; eISSN: 1879-0003

Mohamad Aziz, Nur Atiqah and Mohamed, Hassan and Ong, Mei Yin and Yunus, Robiah and Law, Ming Chiat and Abd Hamid, Hamidah and Kania, Dina and Mahlia, Teuku Meurah Indra (2025) Numerical simulation of hotspot in polyol ester production using microwave-assisted reaction. Results in Engineering, 25. art. no. 104577. pp. 1-10. ISSN 2590-1230

Mohammad Suffian James, Redzuan and Md Tahir, Paridah and Mohd Yusof, Norwahyuni and Al-Edrus, Syeed SaifulAzry Osman and Zainal Abidin, Zurina and Mohamed Yusoff, Mohd Zuhri and Lee, Seng Hua and San, H’ng Paik (2025) Preparation of bio-polyol via bamboo wastes liquefaction and the effects of bleaching by Hydrogen Peroxide treatment. Journal of Wood Science, 71 (1). art. no. 12. pp. 1-17. ISSN 1435-0211; eISSN: 1611-4663

Mohammed, Husam Abduldaem and Yaacob, Mohd Hanif (2025) IoT based hybrid optical-wireless microstructured optical fiber sensor network for cadmium ions detection. Sensors and Actuators A: Physical, 395. art. no. 117002. pp. 1-6. ISSN 0924-4247

Mohammed Ridha, Hussein and Ahmadipour, Masoud and Alghrairi, Mokhalad and Hizam, Hashim and Mirjalili, Seyedali and Zubaidi, Salah L. and Mohammed S, Marwa Y. (2025) A novel hybrid photovoltaic current prediction model utilizing singular spectrum analysis, adaptive beluga whale optimization, and improved extreme learning machine. Renewable Energy, 256 (pt.A). art. no. 123878. pp. 1-32. ISSN 0960-1481; eISSN: 1879-0682 (In Press)

Mohd Ali, Maimunah and Khalid, Nurul Izzah and Wondi, Mohd Hafizz and Haris, Nur Izzah Nabilah and Megat Ahmad Azman, Puteri Nurain (2025) Exploring the nutritional values, volatile compounds, health benefits, and potential food products of chilli (Capsicum annuum): A comprehensive review. Food Chemistry, 490. art. no. 145091. pp. 1-16. ISSN 0308-8146; eISSN: 1873-7072

Mohd Alias, Mohd Shahrudin and Hairuddin, Abdul Aziz and Hassan, Mohd Khair and Md Rezali, Khairil Anas (2025) A review of swirl air intake effect on the performance of a compression ignition engine. Jurnal Kejuruteraan, 37 (3). pp. 1279-1294. ISSN 0128-0198; eISSN: 2289-7526

Mohd Ghamrawi, Muhammad Fadhil and Mohamed Rehan, Balqis and Ahmad Kabirzad, Shabir and Yusuf, Badronnisa and Zulkafli, Zed and Bakti, Hasan Basri and Toriman, Mohd Ekhwan (2025) Evaluating the performance of depth-damage curves in flood damage and risk analysis: a case study from Malaysia. Jurnal Kejuruteraan, 37 (5). pp. 2159-2172. ISSN 0128-0198; eISSN: 2289-7526

Mohd Irwan Shah, Balbir Shah and Ishak, Asnor Juraiza and Hassan, Mohd Khair and Norsahperi, Nor Mohd Haziq (2025) Development of digital twin data-driven modelling for gas turbine operation behaviour. Pertanika Journal of Science and Technology, 33 (S4). pp. 81-97. ISSN 0128-7680; eISSN: 2231-8526

Mohd Isnan, Siti Sarah and Abdullah, Ahmad Fikri and Mohamed Shariff, Abdul Rashid and Ishak, Iskandar and Syed Ismail, Sharifah Norkhadijah and Tai, Doria and Appanan, Maheshwara Rao (2025) Leveraging computational model approach in understanding infectious disease: a case study in Sabah, Malaysia. Pertanika Journal of Science and Technology, 33 (2). pp. 653-676. ISSN 0128-7680; eISSN: 2231-8526

Mohd Nasir, Muhammad Adib and Harun, Sobri and Zainuddin, Zaitul Marlizawati and Kamal, Md Rowshon and Che Rose, Farid Zamani (2025) Machine learning techniques for reference evapotranspiration and rice irrigation requirements prediction: a case study of Kerian irrigation scheme, Malaysia. Paddy and Water Environment, 23 (4). pp. 671-683. ISSN 1611-2490; eISSN: 1611-2504

Mohd Nasir, Muhammad Adib and Kamal, Md Rowshon and Che Rose, Farid Zamani and Zainuddin, Zaitul Marlizawati and Harun, Sobri (2025) Assessing machine-learning performances in predicting future irrigation demand for large-scale rice granaries based on Global Climate Models. Journal of Irrigation and Drainage Engineering, 151 (5). art. no. 05025001. ISSN 0733-9437; eISSN: 1943-4774

Mohd Nasir, Noor Azline and Nadarajah, Archanaah and Megat Johari, Megat-Usamah and Abu Bakar, Nabilah and Safiee, Nor Azizi and Abdul Aziz, Farah N. A. (2025) Performance of high-content waste ash geopolymer-based composites for sustainable construction. Archives of Civil and Mechanical Engineering, 25 (4). art. no. 228. pp. 1-22. ISSN 1644-9665; eISSN: 2083-3318

Mohd Radzuan, Nabilah Afiqah and Mat Samudin, Izzat and Al-Furjan, M. S.H. and Sulong, Abu Bakar and Mohd Foudzi, Farhana and Azman, Muhammad Amin (2025) Thermal and mechanical properties of in-house-manufactured PLA and PA filaments at high temperature. Materiali in Tehnologije, 59 (4). pp. 611-620. ISSN 1580-2949; eISSN: 1580-3414

Mohd Sani, Fareisya Zulaikha and Makhtar, Siti Noormiza and Mohd Nor, Elya and Kamarudin, Nur Diyana and Md Ali, Syaril Azrad and Md Ali, Kurnianingsih (2025) Comparative study of informative acoustic features for VTOL UAV faulty prediction using machine learning. Journal of Advanced Research Design, 130 (1). pp. 64-79. ISSN 2289-7984

Mohd Sani, Fareisya Zulaikha and Rohidi, Muhammad Adam and Mohd Nor, Elya and Md Ali, Syaril Azrad and Makhtar, Siti Noormiza (2025) Comparison of classification models and accelerometer sensors for VTOL UAV flight condition detection. Journal of Aeronautics, Astronautics and Aviation, 57 (3). pp. 737-749. ISSN 1990-7710

Mohd Tohir, Mohd Zahirasri and Martín-Gómez, César (2025) Evaluating fire severity in electric vehicles and internal combustion engine vehicles: a statistical approach to heat release rates. Fire Technology, 61. pp. 2957-2998. ISSN 0015-2684; eISSN: 1572-8099

Mohd Yunos, Nazurah and Ariffin, Siti Hajar and Yusof, Yus Aniza and Mohd Salleh, Faiqa Shazeaa and Zakaria, Rabitah (2025) Effect of different pre-treatments on vacuum oven drying of pegaga (Centella asiatica L.) leaves: drying kinetics, nutritional qualities, and antioxidant capacity. Pertanika Journal of Science and Technology, 33 (S5). pp. 19-42. ISSN 0128-7680; eISSN: 2231-8526

Mohd Yusof, Norwahyuni and Md Tahir, Paridah and Hua, Lee Seng and Mohamed Yusoff, Mohd Zuhri and Mohammad Suffian James, Redzuan and Johari, Izwan and Osman Al-Edrus, Syeed Sailful Azry (2025) Effects of species, adhesive, and structural configurations on compression parallel to the grain of laminated bamboo. BioResources, 20 (1). pp. 527-547. ISSN 1930-2126; eISSN: 1930-2126

Mohd Yusoff, Norita and Chyi, Josephine Liew Ying and Ng, Eng Khoon and Lee, Han Kee and Mayzan, Mohd Zul Hilmi and Alresheedi, Mohammed Thamer and Zainol Abidin, Nadiah Husseini and Md Zain, Ahmad Rifqi and Mahdi, Mohd Adzir (2025) Ammonium bromide as a saturable absorbing device for ultrafast photonics. Journal of Luminescence, 288. art. no. 121545. pp. 1-14. ISSN 0022-2313

Moloody, Abbas and As’arry, Azizan and Hong, Tang Sai and Raja Kamil, . and Zolfagharian, Ali (2025) The PID controller parameter tuning based on a modified differential evolutionary optimization algorithm for the intelligent active vibration control of a combined single link robotics flexible manipulator. Journal of Advanced Research in Applied Sciences and Engineering Technology, 52 (1). pp. 234-258. ISSN 2462-1943

Moloody, Abbas and As’arry, Azizan and Sai Hong, Tang and Kamil, Raja and Md. Zain, Mohd Zarhamdy and Bahiuddin, Irfan (2025) An experimental study on the mechatronics design and implementation of an intelligent active vibration control system for a CSLRFM. Journal of Advanced Research in Applied Mechanics, 134 (1). art. no. undefined. pp. 61-89. ISSN 2289-7895

Muchlisyiyah, Jhauharotul and Shamsudin, Rosnah and Kadir Basha, Roseliza and Shukri, Radhiah and How, Syahmeer and Mohd Basri, Mohd Salahuddin (2025) Optimization of soaking conditions in parboiling using response surface methodology to enhance the properties of MR297 rice cultivar. Cogent Food and Agriculture, 11 (1). art. no. 2482283. ISSN 2331-1983

Muhamad Nazri, Muhammad Nor Ikmal and Basri, Adi Azriff and Abdullah, Mohd Na im and Mustapha, Faizal and Bajuri, Farid and Basri, Ernnie Illyani and Tamagawa, Masaaki (2025) Improvising the Tesla micro-turbine: experimental and performance analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 129 (1). pp. 58-68. ISSN 2289-7879

Muhamad Parid, Dzieda and Talib, Ahmad Tarmezee and Baharuddin, Azhari Samsu and Abdul Rahman, Nur Aliaa and Mohammed, Mohd Afandi P. and Wakisaka, Minato (2025) Mechanics of 3D printing process of white chocolate. Journal of Food Engineering, 391. art. no. 112429. pp. 1-12. ISSN 0260-8774; eISSN: 0260-8774

Muhammad, Faisal and Nisar, Jan and Ali, Ghulam and Anwar, Farooq and Wan Abdul Karim Ghani, Wan Azlina and Sharif, Ahsan and Ahmed, Ejaz (2025) Pyrolysis of sweet lemon (Citrus limetta) waste: effect of zeolite β, ammonium on kinetics and bio-oil yield. Energy Advances, 4 (3). pp. 414-423. ISSN 2753-1457

Murshiduzzaman and As'Arry, Azizan and Lim, Wei Keong and Mohamed Yusoff, Mohd Zuhri and Salit, Mohd Sapuan and Supeni, Eris Elianddy and Wan Hasan, Wan Zuha and Yussof, Hanafiah (2025) Analysis of an automated solar panel cleaning robot on photovoltaics (PV) module frames with composites materials. Physical Sciences Reviews, 10 (4). pp. 381-394. ISSN 2365-659X;

Mustafa, Fatin Hamimi and Yusof, Nik Yusnoraini and Mohd Azlan, Mawaddah and Suhailin, Fariza Hanim and Yean, Chan Yean and Nik Zuraina, Nik Mohd Noor and Salleh, Mohd Zulkifli and Uchida, Hironaga and Ismail, Irneza and Hassan, Rosline and Raja Ibrahim, Raja Kamarulzaman and Mahdi, Mohd Adzir (2025) Optimization of a portable ligand-free optical spectroscopy method for SARS-CoV-2 protein detection. Biosensors and Bioelectronics: X, 26. art. no. 100663. ISSN 2590-1370

Mustafa, Fatin Hamimi and Yusof, Nik Yusnoraini and Mohd Azlan, Mawaddah and Suhailin, Fariza Hanim and Yean, Chan Yean and Noor Nik Zuraina, Nik Mohd and Salleh, Mohd Zulkifli and Uchida, Hironaga and Ismail, Irneza and Hassan, Rosline and Raja Ibrahim, Raja Kamarulzaman and Mahdi, Mohd Adzir (2025) Optimization of a portable ligand-free optical spectroscopy method for SARS-CoV-2 protein detection. Biosensors and Bioelectronics: X, 26. art. no. 100663. ISSN 2590-1370

Mustafa, Rozita and Mohd Radzi, Mohd Amran and Che Soh, Azura and Hizam, Hashim (2025) A transfer function modelling using system identification for air-cooling photovoltaic system. Pertanika Journal of Science and Technology, 33 (3). pp. 1119-1136. ISSN 0128-7680; eISSN: 2231-8526

Mutafi, Ayad and Irwan, J. M. and Yidris, Noorfaizal and Alshalif, Abdullah Faisal and Saif, Yazid and Abdulrahman, Hamdi and Mutaafi, Ala and Al-Ashmori, Yasser Yahya and Amran, Mugahed and Maureira-Carsalade, Nelson and Avudaiappan, Siva (2025) Residual stresses in cold-formed steel sections: An overview of influences and measurement techniques. Forces in Mechanics, 18. art. no. 100306. pp. 1-16. ISSN 2666-3597

Najafabadi, Amin Arab and Yap, Ng Keng and Ashani, Zahra Nazemi and Nejati, Faranak and Ali, Mohamed Abdullahi (2025) Adjusted exponential scaling: an innovative approach for combining diverse multiclass classifications. IEEE Access, 13. pp. 168150-168158. ISSN 2169-3536

Najar, Imtiyaz Akbar and Ahmadi, Raudhah and Amuda, Akeem Gbenga and Mourad, Raghad and Bendary, Neveen El and Ismail, Idawati and Abu Bakar, Nabilah and Tang, Shanshan (2025) Advancing soil-structure interaction (SSI): a comprehensive review of current practices, challenges, and future directions. Journal of Infrastructure Preservation and Resilience, 6 (1). art. no. 5. pp. 1-25. ISSN 2662-2521

Namasivayam Sukumaar, Vijayvignesh and Ishak, Mohamad Ridzwan and Abdullah, Mohd Na’Im and Mohd Zuhri, Mohamed Yusoff and Muhammad Rizal, Muhammad Asyraf (2025) Investigation of flexural mechanical and creep properties of sleeve reinforced pultruded glass fibre reinforced polymer composite for crossarm application. Scientific Reports, 15. art. no. 16023. pp. 1-20. ISSN 2045-2322

Natarajan, Sureshkumar and Rahman Al-Haddad, Syed Abdul and Ahmad, Faisul Arif and Kamil, Raja and Hassan, Mohd Khair and Azrad, Syaril and Macleans, June Francis and Abdulhussain, Sadiq H. and Mahmmod, Basheera M. and Saparkhojayev, Nurbek and Dauitbayeva, Aigul (2025) Deep neural networks for Speech Enhancement and Speech Recognition: a systematic review. Ain Shams Engineering Journal, 16 (7). art. no. 103405. pp. 1-35. ISSN 2090-4479

Ng, Choy Peng and Ahmad, Nordila and Wong, Mohd Muhaimin Ridwan and Law, Teik Hua and Zul Bahari, Ahmad Najman ‘Azam and Mohd Rofi, Muhamad Faisharulfaizi and Abas, Fuad (2025) Analysis and simulation of evacuation routes during disaster situations: a case study in Kuala Lumpur City (KLC). Jurnal Kejuruteraan, 37 (1). pp. 409-419. ISSN 0128-0198; eISSN: 2289-7526

Ng, Michelle Xin Yi and Yu, Kai Xiang and Ten, Joon Yoon and Tan, Khang Wei and Lam, Weng Hoong and Tan, Peng Chee and Choong, Thomas Shean Yaw and Siwayanan, Parthiban and Chen, Binghui and Kim, Kek Seong and Ban, Zhen Hong (2025) Consequence analysis on the critical role of transient pool formation in cold ammonia release and gas dispersion using CFD approach. Journal of Loss Prevention in the Process Industries, 100. art. no. 105870. pp. 1-19. ISSN 0950-4230 (In Press)

Ng, Zi Wei and Salema, Arshad Adam and Ibrahim, Izzudin and Lahuri, Hazratul Mumtaz and Chan, Yi Herng (2025) Gasification of Malaysian agricultural and industrial biomass in CO2: a physicochemical characterization and thermogravimetric-based ranking approach. Renewable Energy, 256 (pt.G). art. no. 124424. pp. 1-14. ISSN 0960-1481; eISSN: 1879-0682

Ngulde, Aliyu Buba and Wan Ab Karim Ghani, Wan Azlina and Mat Nawi, Nazmi and Rashid, Umer and Silas, Kiman (2025) Enhancing the energy content of melawan coal through H2SO4 and NaOH demineralization. Indonesian Journal of Chemistry, 25 (3). art. no. undefined. pp. 760-769. ISSN 1411-9420; eISSN: 2460-1578

Nik Abdul Rahman, Nik Kechik Mujahidah and Abu Talib, Abd Rahim and Saadon, Syamimi and Gires, Ezanee and Salleh, Hanim and Abdellatif, Nasser (2025) Analysis of Stirling engine’s performance in recovering waste heat from wood pellet, coconut husk and bagasse. Journal of Thermal Science and Technology, 20 (1). art. no. 24-00388. ISSN 1880-5566

Noumeur, Abdelmoutaleb and Md Said, Mohamad Syazarudin and Baharudin, Mohd Rafee and Mohamed Yusoff, Hamdan and Mohd Tohir, Mohd Zahirasri (2025) Predicting spatial sound attenuation in buildings with machine learning: Implications for fire alarm placement. Process Safety and Environmental Protection, 199. art. no. 107314. pp. 1-18. ISSN 0957-5820

Olugbenga, Salami Safran and Aashiq, Mohamed and Ahmad, Siti Anom and Pin, Tan Maw and Zhao, Yuanyuan and Rokhani, Fakhrul Zaman (2025) Artificial intelligence-based prediction of cognitive frailty: a clinical data approach. IEEE Access, 13. pp. 161529-161540. ISSN 2169-3536

Omar, Syah Mohd Amin and Hamat, Sanusi and Hussin, Mohd Sabri and Wan Draman, Wan Nur Atiqah and Kelly, Piaras and Ahamad Suffin, Muhamad Qauyum Zawawi and Ariffin, Mohd Azam (2025) Finite element analysis of filler shape in photopolymerization additive manufacturing using the Fusion RSA-RVE algorithm. Jurnal Kejuruteraan, 37 (2). pp. 1015-1023. ISSN 0128-0198; eISSN: 2289-7526

Omer, Suhaila Zein Elabideen and Hashim, Fazirulhisyam and Sali, Aduwati and Ahmad, Faisul Arif (2025) Binary classification of low-rate DoS attacks using Long Short-Term Memory Feed-forward (LSTM-FF) Intrusion Detection System (IDS). Engineering Science and Technology, an International Journal, 66. art. no. 102049. pp. 1-16. ISSN 2215-0986

Othman, Ahmad Fauzi and Othman, Mohammad Lutfi and Ab Kadir, Mohd Zainal Abidin and Abdul Wahab, Noor Izzri and Zainul Abidin, Aidil Azwin (2025) Optimizing voltage profile and mitigating power losses in distribution network reconfiguration via the integration of distributed generation penetration in Malaysia. Journal of Advanced Research in Applied Mechanics, 133 (1). pp. 120-134. ISSN 2289-7895; eISSN: 2289-7895

Othman, Siti Hajar and Zaid, Nur Syahira and Ahmad Shapi'i, Ruzanna and Nordin, Norhazirah and A. Talib, Rosnita and Mohamed Amin Tawakkal, Intan Syafinaz (2025) Starch biopolymer films containing carbon black nanoparticles: properties and active food packaging application. Journal of Science: Advanced Materials and Devices, 10 (4). art. no. 100995. undefined-undefined. ISSN 2468-2284; eISSN: 2468-2179

Pallikodathan, Sivakumar and Che Man, Hasfalina and Mohd Ghazi, Tinia Idaty and Sulaiman, Alawi and Nagarajoo, Gunasilan and Shukery, Mohamad Firdza (2025) Minimizing carbon dioxide (CO2) emissions of pome treatment system using MILP model. Processes, 13 (2). art. no. 583. pp. 1-18. ISSN 2227-9717

Pau, C. H. and Chong, L. C. and Chin, N. L. (2025) Effects of ultrasonication on the physical properties of Herba rice grain. Food Research, 9 (3). pp. 275-282. ISSN 2550-2166

Peng, Wang and Xiaoyuan, Yu and Haron, Nuzul Azam (2025) Relative improvements between roads and railways and transport carbon dioxide emissions: an environmental Kuznets curve hypothesis test in China. Sustainable Futures, 9. art. no. 100520. ISSN 2666-1888

Perera, Chamalka Kenneth and Gopalai, Alpha Agape and Gouwanda, Darwin and Ahmad, Siti Anom (2025) A focused review on upper and lower limb joint torque estimation via neural networks. Pertanika Journal of Science and Technology, 33 (1). pp. 121-147. ISSN 0128-7680; eISSN: 2231-8526

Pillai, Nashmitta and Shatar, Liyana and Mustafa, Fatin H. and Aziz, Muhammad S.A. and Alwahib, Ali A. and Kamil, Yasmin M. and Suhailin, Fariza H. (2025) Enhancement factors of sers substrates based on monometallic and bimetallic nanoparticles embedded on reduced graphene oxide. Plasmonics. ISSN 1557-1955; eISSN: 1557-1963 (In Press)

Pua’at, Afifi A. and Zhahir, Amzari and Ahmad, Mohamed Tarmizi and Hassan, Aziz and Abdul Hamid, Mohd Faisal and Gires, Ezanee (2025) Conceptual design of a new two-seater hoverwing craft. Journal of Aeronautics, Astronautics and Aviation, 57 (3). pp. 815-826. ISSN 1990-7710

Qiaoqiao, Xiong and Qipeng, Chen and Saihong, Tang and Yiting, Li (2025) An efficient and lightweight detection method for stranded elastic needle defects in complex industrial environments using VEE-YOLO. Scientific Reports, 15 (1). art. no. 2879. pp. 1-19. ISSN 2045-2322

Rahmadiawan, Dieter and Akmal, . and Abral, Hairul and Azka, Muhammad Adlan and Sapuan, S. M. and Kadriadi, . and Handayani, Dian and Putri, Dilla Ghania and Khairani, Upik Tadzkia and Zikri, Ahmad and Shi, Shih Chen and UNSPECIFIED (2025) Solvent-selective extraction of Syzygium polyanthum bioactives for tailored polyvinyl alcohol composites: a lignocellulose-derived approach toward biorefinery-based functional materials. Biomass and Bioenergy, 204. art. no. 108467. pp. 1-13. ISSN 0961-9534; eISSN: 1873-2909 (In Press)

Rahmah, Nur Lailatul and Mustapa Kamal, Siti Mazlina and Sulaiman, Alifdalino and Taip, Farah Saleena and Siajam, Shamsul Izhar (2025) Recovery of glucose and acetic acid from Piper betle Linn leaves by subcritical water hydrolysis. ASEAN Journal of Chemical Engineering, 25 (1). pp. 62-74. ISSN 1655-4418; eISSN: 2655-5409

Rahmat, Fariq and Zulkafli, Zed and Ishak, Asnor Juraiza and Abdul Rahman, Ribhan Zafira and Tahir, Wardah and Ab Rahman, Jamalludin and Jayaramu, Veianthan and De Stercke, Simon and Ibrahim, Salwa and Ismail, Muhamad (2025) Interpretable spatio-temporal prediction using Deep Neural Network - Local Interpretable Model-agnostic Explanations: A case study on leptospirosis outbreaks in Malaysia. Engineering Applications of Artificial Intelligence, 151 (undefined). art. no. 110665. undefined-undefined. ISSN 0952-1976

Rajamony, Reji Kumar and Sridhar, K. and Kalidasan, B. and Mishra, Richa and Farade, Rizwan A. and Megalingam, A. and Raj M, John Iruthaya and Nur-E-Alam, Mohammad and Abedin, Tarek (2025) Cutting-edge cooling techniques for photovoltaic systems: a comprehensive review. Interactions, 246 (1). art. no. 41. pp. 40-41. ISSN 3005-0731

Rambli, Jakaria and Quitain, Armando T. and Khezri, Ramin and Wan Ab Karim Ghani, Wan Azlina and Assabumrungrat, Suttichai and Kida, Tetsuya (2025) Microwave-assisted hydrothermal carbonization of sago (Metroxylon spp) to hydrochar as potential catalyst for etherification of glycerol. Biomass and Bioenergy, 201. art. no. 108143. ISSN 0961-9534; eISSN: 1873-2909

Ramli, N. and Rashid, Raizal S.M. and Nasir, N. A.M. and Voo, Y. L. and Azreen, N. M. and Karim, J. A. (2025) Modified ultra-high-performance concrete with boron carbide for neutron and gamma radiation shielding. Construction and Building Materials, 467. art. no. 140421. pp. 1-8. ISSN 0950-0618

Ramli, Noorhidayah and Azizi, Muhammad Azim and Abdul Aziz, Nuraini and Azman, Muhamad Amin (2025) Advances and challenges in electric unicycle stability: a review of structural design and control mechanisms. Journal of Engineering and Applied Science, 72 (1). art. no. 197. pp. 1-34. ISSN 1110-1903; eISSN: 2536-9512

Ramli, Nurhayati and Muhammad Rashid, Raizal Saifulnaz and Mohd Nasir, Noor Azline and Voo, Yen Lei and Masenwat, Noor Azreen and Abdul Karim, Julia (2025) Modified ultra high-performance concrete with boron carbide for neutron and gamma radiation shielding. Construction and Building Materials, 467 (140421). art. no. 140421. pp. 1-8. ISSN 0950-0618

Ramli, Rizal and Mohd Yusoff, Norita and Sani, Abubakar and Alresheedi, Mohammed Thamer and Ng, Eng Khoon and Zan, Mohd Saiful Dzulkefly and Mahdi, Mohd Adzir (2025) Copper nanoparticle polyvinyl alcohol-film with multimode fiber saturable absorber for Q-switched lasers. Optical Fiber Technology, 95. art. no. 104389. pp. 1-9. ISSN 1068-5200

Ramzia Salem, A.M. and Ramli, R. and Alresheedi, M.T. and Zainol Abidin, N.H. and Ng, E.K. and Mahdi, M.A. (2025) Enhanced tunability of a multiwavelength Brillouin-Erbium laser using cascaded photonic crystal and large effective area fibers. Optical Fiber Technology, 90. art. no. 104093. pp. 1-7. ISSN 1068-5200; eISSN: 1068-5200

Razali, Nur Isnida and Abdul Aziz, Nuraini and Topa, Ameen (2025) Verification of the computer model of the bus rollover according to Annex 9 UNECE R66. ASEAN Engineering Journal, 15 (3). pp. 143-150. ISSN 2586-9159

Ridha, Hussein Mohammed and Hizam, Hashim and Mirjalili, Seyedali and Othman, Mohammad Lutfi and Ya’acob, Mohammad Effendy and Abdul Wahab, Noor Izzri and Ahmadipour, Masoud (2025) A novel prediction of the PV system output current based on integration of optimized hyperparameters of multi-layer neural networks and polynomial regression models. Next Energy, 8. art. no. 100256. pp. 1-15. ISSN 2949-821X

Rima, Benidir and Hejazi, Farzad and Rashid, Raizal Saifulnaz Muhammad and Rahmatian, Arash (2025) Development of a self-rising floodwall system using ultra high-performance fibre reinforced concrete. Structures, 80. art. no. 109911. pp. 1-16. ISSN 2352-0124

Robane, Nor Syamimi Amalina and Chong Vui San, Michael and Md Said, Mohamad Syazarudin and Mohd Tohir, Mohd Zahirasri (2025) Parametric investigation of acetone liquid pool fire experiments on fire characteristics. Process Safety and Environmental Protection, 194. pp. 604-618. ISSN 0957-5820

Rong, Li and Shari, Zalina and Ab Kadir, Mohd Zainal Abidin (2025) A conceptual framework for multi-objective optimization of building performance: Integrating intelligent algorithms, simulation tools, and climate adaptation. Multidisciplinary Reviews, 8 (12). art. no. e2025385. pp. 1-19. ISSN 2595-3982

Rowshanaie, Omid and Mohd Tohir, Mohd Zahirasri and Rowshanaie, Hooman (2025) Refinery boiler flue gas evaluation on assessed Subcritical Organic Rankine Cycle (SORC) by applying R1234ze(E), R1234yf, and R134a pure and zeotropic mixtures. Heat Transfer, 55 (2). pp. 846-876. ISSN 2688-4534; eISSN: 2688-4542

Ruijie, Pan and Sali, Aduwati and Li, Lu and Mohyedin, Muhammad Zamir and Qahtan, Sangin (2025) Evaluation of personal radiation exposure from wireless signals in indoor and outdoor environments. IEEE Access, 13. pp. 106489-106510. ISSN 2169-3536

R․ Koloor, S․ ․.S. and Farokhi Nejad, A. and Yidris, N. and Sapuan, S. M. and Abdullah, M. R. and Tamin, M. N. (2025) Elastic-damage characterization of fibre-bundle lamina of CFRP composite through 3D digital image correlation and finite element method. Forces in Mechanics, 21. art. no. 100337. pp. 1-12. ISSN 2666-3597

S., Khairunniza-Bejo and W.M., Baqir-Mahdi and M., Nurhafizi-Zahari (2025) Automatic counting of Paulownia trees using unmanned aerial vehicle images and template matching technique. Food Research, 9 (suppl. 1). pp. 183-192. ISSN 2550-2166; eISSN: 2550-2166

Sa'aya, Nurul Syahirah Nasuha and Abdul Halim, Norhana and Tajuddin, Hairul Anuar and Norrrahim, Mohd Nor Faiz and Ngah Demon, Siti Zulaikha and Che Ros, Fadhlina and Aziz, Shujahadeen and Hamsan, Muhammad Hafiz and Mohd Azmi, Ahmad Farid and Zainol Abidin, Nadiah Husseini (2025) Exploring the effective parameters on the photocatalytic activity of TiO2 nanoparticles. South African Journal of Chemical Engineering, 53 (undefined). art. no. undefined. pp. 127-141. ISSN ; eISSN: 1026-9185

Saeed, Firas Hassan and Hejazi, Farzad and Muhammad Rashid, Raizal Saifulnaz (2025) Mechanical anchorage system in retrofitting of RC slabs using CFRP rods and concrete jacket. Archives of Civil and Mechanical Engineering, 25. art. no. 72. ISSN 1644-9665; eISSN: 2083-3318

Safiee, Nor Azizi and Hassan, Abdirahman Hussien and Mohd Nasir, Noor Azline and Abd Aziz, Farah Nora Aznieta and Abu Bakar, Nabilah (2025) Sustainable paving blocks incorporated with hybrid-treated recycled concrete aggregate. Asian Journal of Civil Engineering, 26. pp. 2071-2084. ISSN 1563-0854; eISSN: 2522-011X

Sahari, Yahya and Anuar, Mohd Shamsul and Mohd Nor, Mohd Zuhair and Abdul Ghani, Nur Hamizah (2025) Enhancing the efficiency of infrared drying of desiccated coconut through process optimization and validation. Pertanika Journal of Science and Technology, 33 (S1). pp. 1-22. ISSN 0128-7680; eISSN: 2231-8526

Saleh, Ali Mohamed and Alias, Azil Bahari and Syed Hasan, Syed Shatir A. and Jawad, Ali H. and Shihab, Thaer Abdulwahhab and Ali, Obed M. and Wan Ab Karim Ghani, Wan Azlina and Mahdi, Hadi Hamdi and Mohammed Saleh, Noah and Ahmed, Omer Khalil (2025) Isotherm and kinetic models of SO2 adsorption on palm kernel shell-activated carbon and xerogel blends: effect of flow rate and contact time. Results in Engineering, 25. art. no. 103970. pp. 1-12. ISSN 2590-1230

Saleh, Nur Luqman and Sali, Aduwati and Jiun Terng, Liew and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Mohd Ali, Azizi and Mohd Ali, Borhanuddin and Mohd Razali, Sheriza and Nuruddin, Ahmad Ainuddin and Ramli, Nordin (2025) Peatland forest monitoring and management solution in Peninsular Malaysia: optimal parameters for LoRa data. Ain Shams Engineering Journal, 16 (6). art. no. 103374. pp. 1-14. ISSN 2090-4479

Salim, Salim Mkubwa and Romli, Fairuz Izzuddin and Harmin, Mohammad Yazdi and Mazlan, Norkhairunnisa and Abang Abdul Majid, Dayang Laila (2025) Establishment of seat pitch and seat tray table’s height as significant factors for aircraft passengers’ flight comfort through triangulation method. Journal of Aeronautics, Astronautics and Aviation, 57 (3S). pp. 295-307. ISSN 1990-7710

Salka, Tanko Daniel and Hanafi, Marsyita and Abdul Rahman, Sharifah M.Syed Ahmad and Mohamed Zulperi, Dzarifah and Omar, Zaid (2025) Plant leaf disease detection and classification using convolution neural networks model: a review. Artificial Intelligence Review, 58 (10). art. no. 322. pp. 1-66. ISSN 0269-2821; eISSN: 1573-7462

Salka, Tanko Daniel and Hanafi, Marsyita and Syed Ahmad Abdul Rahman, Sharifah M. and Mohamed Zulperi, Dzarifah and Omar, Zaid (2025) Plant leaf disease detection and classification using convolution neural networks model: a review. Artificial Intelligence Review, 58. art. no. 322. ISSN 0269-2821; eISSN: 1573-7462

Samsol, Muhammad Hairol Ridzwan and Abidin, Zurina Zainal and Zawawi, Norhasnida and Jusoh, Arif Zaidi (2025) Assessing a strategy to recover trehalulose sugar from stingless bee honey Geniotrigona thoracica sp. via cation exchange adsorption. Food Chemistry, 491. art. no. 145317. pp. 1-14. ISSN 0308-8146; eISSN: 1873-7072

Samson, Elendu Ekwueme and Supeni, Eris Elianddy and Mohd Arffin, Mohd Khairol Anuar and Shafie, Suhadi and Ishaq, Muhammad (2025) Synthesis of Nico-bimetallic nitride/graphene oxide/Ti3C2 MXene hybrid electrode for supercapacitors. International Journal of Modern Manufacturing Technologies, 17 (1). pp. 170-178. ISSN 2067-3604

Sanchez, Philip Donald C. and Hashim, Norhashila and Mohd Basri, Mohd Salahuddin and Saari, Nazamid and Muhammad, Dimas Rahadian Aji (2025) Unlocking the potential of cacao bean shell as a functional food additive: composition, applications, optimization, and future directions – a review. Food Chemistry, 492 (pt. 2). art. no. 145471. pp. 1-19. ISSN 0308-8146; eISSN: 1873-7072

Sanchez, Philip Donald C. and Hashim, Norhashila and Muhammad, Dimas Rahadian Aji (2025) Properties, uses, and utilization methods of cacao (Theobroma cacao) bean shells (CBS), and applications of emerging green extraction techniques – a review. Journal of Food Composition and Analysis, 145. art. no. 107823. pp. 1-17. ISSN 0889-1575

Santos Lula Barros, Letícia and Hiraki, Koju and Assis da Silveira, Marcelo and Chak, Yew Chung and Abdullah, Amirul Fiqri and Varatharajoo, Renuganth (2025) Potential of non-flat solar sail for higher characteristic acceleration. Advances in Space Research, 75 (2). pp. 2289-2306. ISSN 0273-1177; eISSN: 1879-1948

Selamat, Nur Asmiza and Md Ali, Sawal Hamid and Ismail, Ahmad Ghadafi and Ahmad, Siti Anom and Minhad, Khairun Nisa' (2025) Novel chewing cycle approach for peak detection algorithm of chew count estimation. IEEE Sensors Journal, 25 (1). pp. 803-812. ISSN 1530-437X; eISSN: 1558-1748

Sfayyih, Alyaa Hamel and Sulaiman, Nasri and Sabry, Ahmad H. and Arman Shah, Fatin Nursyaza (2025) Non-invasive diagnosis of lung diseases via multimodal feature extraction from breathing audio and chest dynamics. Computers in Biology and Medicine, 191. art. no. 110182. pp. 1-16. ISSN 0010-4825; eISSN: 1879-0534

Shahar, Farah Syazwani and Balakrishnan, Thinesh Sharma and Hameed Sultan, Mohamed Thariq (2025) The evolution and environmental prospects of renewable bioplastics: types, production methods, and sustainability. Journal of Renewable Materials, 13 (6). pp. 1071-1101. ISSN 2164-6325; eISSN: 2164-6341

Shahar, Farah Syazwani and Sultan, Mohamed Tariq Hameed and Nowakowski, Marek and Łukaszewicz, Andrzej (2025) UGV-UAV Integration Advancements for Coordinated Missions: A Review. Journal of Intelligent and Robotic Systems: Theory and Applications, 111 (2). art. no. 69. pp. 1-34. ISSN 0921-0296; eISSN: 1573-0409

Shajahan, Mohamed Iqbal and Michael, Jee Joe and Prakash, K. B. and Bharathiraja, R. and Alam, Mohammad Mukhtar and Hussain, Fayaz and Gulbarga, Mohammad Imtiyaz and Keçebaş, Ali (2025) Edge-integrated IoT framework for real-time fault diagnosis and performance degradation analysis in photovoltaic modules. Renewable Energy, 258. art. no. 124928. pp. 1-16. ISSN 0960-1481; eISSN: 1879-0682 (In Press)

Shamsudin, Mohd Afdhal and Mustapha, Faizal and Abdullah, Mohd Na’im and Mustapha, Mazli (2025) Sustainable aluminosilicate coatings from palm oil waste for enhanced thermal and microstructure properties. Materials, 18 (4). art. no. 821. pp. 1-24. ISSN 1996-1944

Shamsudin, Rosnah and Muchlisyiyah, Jhauharotul and Sathongpan, Parichat and Varith, Jaturapatr and Hamzah, Muhammad Hazwan (2025) Unveiling the distinctive qualities of Malaysian and Thai rice. Journal of Engineering and Sustainable Development, 29 (2). pp. 164-169. ISSN 2520-0917; eISSN: 2520-0925

Shan, Jianrong and Yang, Bowen and Su, Yaqiong and Chong, Gunhean and Abdullah, Luqman Chuah and Qi, Xinhua and Guo, Haixin (2025) Microwave irradiation-assisted isomerization of glucose to fructose over Mg/Al-doped lignin self-assembled nanospheres. Applied Catalysis B: Environmental, 379. art. no. 125682. pp. 1-13. ISSN 0926-3373

Shen, Jiazheng and Tang, Saihong and Zhao, Ruixin and Fan, Luxin and Mohd Ariffin, Mohd Khairol Anuar and As’arry, Azizan (2025) Development of an improved Jellyfish Search (JS) algorithm for solving the optimal path problem of multi-robot collaborative multi-tasking in complex vertical farms. Agriculture, 15 (6). art. no. 578. pp. 1-22. ISSN 2077-0472

Shivarama, B. and Isloor, Arun M. and Murthy, Ch Sn and Prabhu, Balakrishna and Abdul Rashid, Suraya (2025) A polysulfone/MIL-125(Ti) mixed matrix membrane for removing toxic dyes and heavy metals from water. Applied Nanoscience (Switzerland), 15 (3). art. no. 20. pp. 1-19. ISSN 2190-5509; eISSN: 2190-5517

Siajam, Shamsul Izhar and Zainuddin, Halimatun Sakdiah and Sabli, Nordin and Yeow, Wen Feng and Yoshida, Hiroyuki (2025) Preparation of activated carbon from paper mill sludge waste activated by superheated steam. International Journal of Nano and Biomaterials, 11 (1). pp. 1-8. ISSN 1752-8933; eISSN: 1752-8941

Siddiqui, Vasi Uddin and Jailani, Azrol and Habib, Abdul and Hidzer, M. Hazim and Usmani, Farah and Azka, Muhammad Adlan and Suffian, Muhammad Irfan and Saifulazmi, Muhammad Arif and Sapuan, S. M. and Mahardika, Melbi and Kadriadi, . and Abral, Hairul (2025) Water hyacinth-derived cellulose biocomposites: extraction methods, physicomechanical properties, and sustainable applications — a review. Biomass and Bioenergy, 205. art. no. 108541. pp. 1-23. ISSN 0961-9534; eISSN: 1873-2909 (In Press)

Siddiqui, Vasi Uddin and Lahmdi, Fahd Salah Hasan and Sapuan, S. M. and Azka, Muhammad Adlan and Khan, Abir and Yusuf, J. and Hasan, Mohammad Zaid and Habib, Abdul (2025) Characterization of mechanical, thermal, and morphological properties for long hemp fiber-reinforced green epoxy biocomposites. Polymer Composites, 46 (11). pp. 10128-10137. ISSN 0272-8397; eISSN: 1548-0569

Siddiqui, Vasi Uddin and Sapuan, S. M. and Mohd Ariffin, Mohd Khairol Anuar and Hassan, Mohd Roshdi (2025) Mechanical, thermal, viscoelastic, and electrical performance evaluation of graphene nanoplatelets/polylactic acid (GNP/PLA) nanocomposites. International Journal of Precision Engineering and Manufacturing, 27 (1). pp. 277-295. ISSN 2234-7593; eISSN: 2005-4602

Singh, Spoorthi and Jain, Meet Hitesh and Kaushal, Kanishk and Zuber, Mohammad and Basri, Ernnie Illyani and Ahmad, Kamarul Arifin and Dol, Sharul Sham and Nair, Vishnu G. (2025) Adaptive control strategies for button motor actuated insect scale flapping wing MAV mechanisms. Scientific Reports, 15 (1). art. no. 28626. pp. 1-29. ISSN 2045-2322

Singh, Spoorthi and Zuber, Mohammad and Bhat, Naman and Kumar.S, Rathina and Basri, Ernnie Illyani and Ahmad, Kamarul Arifin and Yadav, Manish Varun and Hegde, Navya Thirumaleshwar (2025) Bio-inspired robotics: kinematic and gait analysis of quad and hexa-legged systems. Journal of Robotics and Control (JRC), 6 (2). pp. 757-768. ISSN 2715-5072; eISSN: 2715-5056

Singh, Spoorthi and Zuber, Mohammad and Hegde, Navya Thirumaleshwar and Jain, Meet Hitesh and Hamidon, Mohd Nizar and Basri, Adi Azriff and Mazlan, Norkhairunnisa and Ahmad, Kamarul Arifin and Moorthy, Ramya S (2025) Empowering pandemic resilience: simulation of integrating IoT innovation to curtail mortality. Telematics and Informatics Reports, 17. art. no. 100178. pp. 1-13. ISSN 2772-5030; eISSN: 2772-5030

Sirajudeen, Abdurrasheed Olayinka and Law, Teik Hua and Wong, Shaw Voon and Ng, Choy Peng (2025) Examining the effect of relative improvements in road mobility versus accessibility on the fatality-to-injury ratio: Insights from income as an intermediate variable. Transport Policy, 163. pp. 262-272. ISSN 0967-070X; eISSN: 1879-310X

Sivaraos and Phanden, Rakesh Kumar and Lee, K. Y. Sara and Abdullah, E. J. and Kumaran, K. and Al-Obaidi, A. S. M. and Devarajan, R. (2025) Artificial neural network for performance modelling of shape memory alloy. International Journal on Interactive Design and Manufacturing. ISSN 1955-2513; eISSN: 1955-2505

Sjahro, Noerhidajat and Yunus, Robiah and Abdullah, Luqman Chuah and Nainggolan, Marihot and Abdul Rashid, Suraya and Asis, Ahmad Jaril and Syafiie, S. and Habib, Saiful Hafiz and Harun, Nurhanina (2025) Valorization of oil palm empty fruit bunch (OPEFB) as membrane polymer via non-solvent induced phase separation method (NIPS) for removal of aqueous contaminants. Discover Sustainability, 6 (1). art. no. 319. pp. 1-24. ISSN 2662-9984

Sobri, Zakiah and Mohamed Asa’ari, Ainun Zuriyati and Mohd Azib, Muhammad Azri and Mohd Nazri, Muhammad Irdin and Zainal Abedin, Nur Hanani and Zainudin, Edi Syams (2025) Green synthesis of zinc oxide nanoparticles using brown algae on oil palm empty fruit bunch pulp and paper substrates: effect of pH 6 to 8. BioResources, 20 (2). pp. 3689-3702. ISSN 1930-2126

Solangi, Faheem Ahmed and Ansari, Ali Murtaza and Noonari, Altaf Alam and Hussain, Fayaz and Zhang, Bo and Nawi, Nazmi Mat and Saleel, C Ahamed (2025) Debris accumulation, acoustic and wear analysis of compression ignition engine using bio alcohols blends. Case Studies in Thermal Engineering, 76. art. no. 107408. pp. 1-14. ISSN 2214-157X

Solangi, Faheem Ahmed and Noonari, Altaf Alam and Hussain, Fayaz and Ding, Zhou and Zhang, Bo and Razzaq, Luqman (2025) Study of deposit accumulation and tribological degradation in diesel engine utilizing blend fuels. Energy Conversion and Management: X, 26. art. no. 100999. ISSN 2590-1745

Soomro, Mehrullah and Hassan, Mohd Khair and Mustafa Abro, Ghulam E. and Marimuthu, Maran (2025) Electronic wedge brakes: a review of design, modeling, control strategies, and testing methodologies. IEEE Access, 13. pp. 67378-67399. ISSN 2169-3536

Subramaniam, Sathya Rau and Zainal Abidin, Zurina and Issa, Mohammed Abdullah and Harun, Nur Haninah and Pudza, Musa Yahaya (2025) Elucidating heavy metals ions detection using screen printed electrodes with starch carbon dots as modifier. Water, Air, and Soil Pollution, 236 (14). art. no. 909. pp. 1-16. ISSN 0049-6979; eISSN: 1573-2932

Subramanian, Sudagar and Rajendran, Silambarasan and Keçebaş, Ali and Alwetaishi, Mamdooh and Bahuruteen Ali Ahamadu, H. and Munimathan, Arunkumar and Fayaz, H. (2025) Sustainable biodiesel production from Delonix regia pods: Advancing renewable energy through pyrolytic oil and dual-pathway esterification. Process Safety and Environmental Protection, 202. art. no. 107747. ISSN 0957-5820; eISSN: 1744-3598

Sukainah, Andi and Putra, Reski Praja and Tawakal, Intan Syafinaz Mohamed Amin and Fadilah, Ratnawaty (2025) Physicochemical properties of corn flour modified by mixed-culture (Aspergillus sp. and Lactobacillus fabifermentans) fermentation. Canrea Journal: Food Technology, Nutritions, and Culinary Journal, 8 (1). art. no. undefined. pp. 105-119. ISSN ; eISSN: 2621-9468

Sukarti, Suziee and Sulaima, Mohamad Fani and Abdul Kadir, Aida Fazliana and Zulkafli, Nur Izyan and Othman, Mohammad Lutfi and Hanak, Dawid P. (2025) Enhancing energy savings verification in industrial settings using deep learning and anomaly detection within the IPMVP framework. Energy and Buildings, 327. art. no. 115096. pp. 1-21. ISSN 0378-7788

Sukumaar, Vijayvignesh Namasivayam and Ishak, Mohamad Ridzwan and Abdullah, Mohd Na’Im and Mohd Zuhri, Mohamed Yusoff and Muhammad Rizal, Muhammad Asyraf (2025) Evaluation of deflection–creep properties of sleeve-retrofitted pultruded glass fiber reinforced polymer composite cross-arms for transmission tower applications. Fibers and Polymers, 26 (10). pp. 4397-4417. ISSN 1229-9197; eISSN: 1875-0052

Sukumaar, Vijayvignesh Namasivayam and Ishak, Mohamad Ridzwan and Yidris, Noorfaizal and Mazlan, Norkhairunnisa and Muhammad Rizal, Muhammad Asyraf (2025) Improving creep resistance and durability forecasting of Balau wood–PGFRP composite cross-arms using sleeve retrofitting for transmission towers. Results in Engineering, 27. art. no. 105958. pp. 1-16. ISSN 2590-1230

Sulin, Siti Naderah and Mokhtar, Mohd Noriznan and Baharuddin, Azhari Samsu and Mohammed, Mohd Afandi P. (2025) Simulation and techno-economic evaluation of integrated palm oil mill processes for advancing a circular economy. Cleaner Environmental Systems, 19. art. no. 100323. pp. 1-15. ISSN 2666-7894

Sun, Ran and Lu, Ruiqiu and Zhang, Chengxi and Wang, Wei and Varatharajoo, Renuganth and Xu, Dezhi (2025) Near-asteroids spacecraft hovering control: a model-free approach with appointed-time performance guarantees. Journal of the Franklin Institute, 362 (15). art. no. 107978. ISSN 0016-0032; eISSN: 1879-2693

Sunarsono, Hery and Abral, Hairul and Mahardika, Melbi and Muhammad Railis, Razan and Sapuan, S.M. and Azka, Muhammad Adlan and Rahmad, . and Arrafi, Muhammad Rizky (2025) Enhancing mechanical properties of durian (Durio ziberthinus murr.) seed starch biopolymer filled with Indonesian bay leaf (Syzygium polyanthum) extract. Biomass and Bioenergy, 202. art. no. 108159. ISSN 0961-9534; eISSN: 1873-2909

T., Nivetha and B., Bindu and Kamsani, Noor Ain and UNSPECIFIED (2025) Spiking neural network with 1T-1R RRAM synapses and CMOS LIF neurons for in-situ learning and pattern recognition. AEU - International Journal of Electronics and Communications, 205. art. no. 156145. pp. 1-10. ISSN 1434-8411; eISSN: 1618-0399 (In Press)

Tai, Jan Lean and Hameed Sultan, Mohamed Thariq and Łukaszewicz, Andrzej and Józwik, Jerzy and Oksiuta, Zbigniew and Shahar, Farah Syazwani (2025) Recent trends in non-destructive testing approaches for composite materials: a review of successful implementations. Materials, 18 (13). art. no. 3146. pp. 1-39. ISSN 1996-1944; eISSN: 1996-1944

Tai, Jan Lean and Sultan, Mohamed Thariq Hameed and Shahar, Farah Syazwani (2025) Analysis of phased array corrosion mapping data using Probabilistic Detection (POD) method. Pertanika Journal of Science and Technology, 33 (4). pp. 1887-1906. ISSN 0128-7680; eISSN: 2231-8526

Tai, Jan Lean and Sultan, Mohamed Thariq Hameed and Łukaszewicz, Andrzej and Siemiątkowski, Zbigniew and Skorulski, Grzegorz and Shahar, Farah Syazwani (2025) Preventing catastrophic failures: a review of applying acoustic emission testing in multi-bolted flanges. Metals, 15 (4). art. no. 438. pp. 1-40. ISSN 2075-4701

Tamassoki, Sakina and Wang, Shanyong and Nik Daud, Nik Norsyahariati and Roshan, Mohammad Jawed (2025) Enhanced flexible pavement subgrade stability using activated carbon, coir fiber, and lime. Journal of Rock Mechanics and Geotechnical Engineering. pp. 1-16. ISSN 1674-7755; eISSN: 2589-0417

Tarno, Mannir Ibrahim and Mohamed Ariff, Azmah Hanim and Mohd Tahir, Suraya and Jaafar, Che Nor Aiza (2025) MXene as a microstructural modifier in solar thermal absorber: a review. Pertanika Journal of Science and Technology, 33 (4). pp. 1707-1741. ISSN 0128-7680; eISSN: 2231-8526

Tay, Chai Hua and Mazlan, Norkhairunnisa and Wayayok, Aimrun and Basri, Mohd Salahuddin and Albakri Abdullah, Mohd Mustafa (2025) Zeolite based foamed geopolymer concrete reinforced with Cellulose Nanofibril prepared in low concentration alkaline solution: Porosity, compressive strength, and water permeability. Journal of Cleaner Production, 489. art. no. 144609. pp. 1-16. ISSN 0959-6526

Teik Hong, Aaron Aw and Varatharajoo, Renuganth and Chak, Yew Chung (2025) Review of deployment controllers for space tethered system. Advances in Space Research, 75 (4). pp. 3933-3949. ISSN 0273-1177; eISSN: 1879-1948

Tejes, P.K.S. and Naik, B. Kiran and Dasore, Abhishek and Hashim, Norhashila (2025) Multi-objective optimization of a three-fluid hollow fiber membrane dehumidifier for energy-efficient drying applications. Case Studies in Thermal Engineering, 75. art. no. 107036. pp. 1-18. ISSN 2214-157X

Tie, Kenrick Weiting and Sim, Jia Huey and Tey, Jing Yuen and Yeo, Wei Hong and Lee, Zhi Hua and Ng, Law Yong and Bee, Soo Tueen and Lee, Tin Sin and Abdullah, Luqman Chuah (2025) Additive manufacturing via direct ink writing of customized silicone foam with glycerol as dispersed phase for diverse applications. Processes, 13 (3). art. no. 677. pp. 1-22. ISSN 2227-9717

V.S., Suhas and T., Shanmugapriya and Mohd Nasir, Noor Azline (2025) Enhanced corrosion resistance of mild steel in simulated concrete pore solution via composite coatings modified with binary and hybrid nanofillers: ZnO–Ni, Ni–NiO, ZnO–Zn, and ZnO–NiO. Materials Letters, 400 (undefined). art. no. 139134. undefined-undefined. ISSN 0167-577X; eISSN: 1873-4979

Varatharajoo, Renuganth and Chak, Yew Chung and Razoumny, Vladimir (2025) Solar sail trajectory optimization for interplanetary missions: part ii—neuro-fuzzy control. European Physical Journal: Special Topics, 234 (25). pp. 7907-7916. ISSN 1951-6355; eISSN: 1951-6401

Vinoth Kumar, J. and Venkatesan, M. and Prakash, K. B. and Bharathiraja, R. and Hussain, Fayaz and Gulbarga, Mohammad Imtiyaz and Alam, Mohammad Mukhtar and Keçebaş, Ali (2025) Performance enhancement of trapezoidal salt gradient solar ponds using reflectors and glazing. Applied Thermal Engineering, 283. art. no. 128893. pp. 1-17. ISSN 1359-4311 (In Press)

Wan, Xianglong and Liu, Zheyuan and Yao, Yiduo and Wan Hasan, Wan Zuha and Liu, Tiange and Duan, Dingna and Xie, Xueguang and Wen, Dong (2025) Data uncertainty (DU)-former: an episodic memory electroencephalography classification model for pre- and post-training assessment. Bioengineering, 12 (4). art. no. 359. pp. 1-23. ISSN 2306-5354

Wan Yusoff, Wan Yusrizal and Othman, Mohammad Lutfi and Ab Kadir, Mohd Zainal Abidin and Abdul Wahab, Noor Izzri (2025) Distribution network expansion planning and integration of distributed energy resources considering massive penetration of electric vehicle charging stations in Malaysia. Journal of Advanced Research Design, 130 (1). pp. 113-125. ISSN 2289-7984; eISSN: 2289-7984

Wan Yusoff, Wan Yusrizal and Othman, Mohammad Lutfi and Ab Kadir, Mohd Zainal Abidin and Abdul Wahab, Noor Izzri and Zainul Abidin, Aidil Azwin (2025) A review of distribution network expansion planning. Pertanika Journal of Science and Technology, 33 (1). art. no. 3. pp. 47-73. ISSN 0128-7680; eISSN: 2231-8526

Wang, Bingzhen and Liu, Jinghua and Zhang, Xiaolei and Lin, Jianpeng and Li, Shuyan and Wang, Zhongxiao and Cao, Zhendong and Wen, Dong and Liu, Tiange and Harun Ramli, Hafiz Rashidi and Harith, Hazreen Haizi and Wan Hasan, Wan Zuha and Dong, Xianling (2025) A stacking ensemble framework integrating radiomics and deep learning for prognostic prediction in head and neck cancer. Radiation Oncology, 20 (1). art. no. 127. pp. 1-14. ISSN 1748-717X

Wang, Na and Kamil, Raja and Al-Haddad, Syed Abdul Rahman and Ibrahim, Normala and Zhao, Zhen (2025) Enhancing AI depression detection using transfer learning. Contemporary Mathematics (Singapore), 6 (3). pp. 3054-3080. ISSN 2705-1064; eISSN: 2705-1056

Wang, Xinming and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah and Zhao, Ruixin (2025) LeafMamba: a novel IoT-integrated network for accurate and efficient plant leaf disease detection. Alexandria Engineering Journal, 123. pp. 415-424. ISSN 1110-0168

Wei, Jiapei and As'arry, Azizan and Md Rezali, Khairil Anas and Mohamed Yusoff, Mohd Zuhri and Ma, Haohao and Zhang, Kunlun (2025) A review of YOLO algorithm and its applications in autonomous driving object detection. IEEE Access, 13. pp. 93688-93711. ISSN 2169-3536

Wirawan, Willy Artha and Sabitah, Ayan and Sakti, Gunawan and Harianto, Bambang Bagus and Agus Choiron, Moch. and Ilyas, R.A. and Sapuan, S.M. and Prasetijo, Joewono (2025) Crashworthiness characteristic of aluminum/composite hybrid tubes under axial compression. Results in Engineering, 25. art. no. 103889. pp. 1-14. ISSN 2590-1230; eISSN: 2590-1230

Wirawan, Willy Artha and Wulansari, Ajeng and Sabitah, Ayan and Putra, Muhammad Rezki Fitri and Gapsari, Femiana and Sartika, Dewi and Ilyas, R.A. and Sapuan, S.M. (2025) Characteristics of naturally woven Waru bark fiber for eco-friendly composite reinforcement. International Journal of Biological Macromolecules, 295. art. no. 139459. pp. 1-10. ISSN 0141-8130; eISSN: 1879-0003

Wu, Ruoyan and Wang, Xiaolin and He, Siyu and Wu, Minyi and Li, Panyu and Show, Pau Loke and Han, Ping and Hamzah, Muhammad Hazwan and Zhang, Yongkui and Chen, Jing (2025) Robust immobilization of uranium using biogenic FeS with lignocellulose from green plant waste. Chemical Engineering Journal, 528. art. no. 172352. pp. 1-17. ISSN 1385-8947

Xiao, Hanyue and Hameed Sultan, Mohamed Thariq and Shahar, Farah Syazwani and Nayak, Suhas Yeshwant and Najeeb, Muhammad Imran and Muhammad Amir, Siti Madiha and Rahim, Sapizah (2025) High velocity impact response and damage analysis of hybrid aluminum/carbon fiber/pineapple leaf fiber laminates for automotive structure using TOPSIS method. Journal of Natural Fibers, 22 (1). art. no. 2445583. pp. 1-21. ISSN 1544-0478; eISSN: 1544-046X

Xiao, Hanyue and Sultan, Mohamed Thariq Hameed and Shahar, Farah Syazwani and Nayak, Suhas Yeshwant (2025) An experimental study on low-velocity impact behavior of carbon fiber/pineapple leaf fiber hybrid laminates for automotive applications. Journal of Natural Fibers, 22 (1). art. no. 2448015. pp. 1-25. ISSN 1544-0478; eISSN: 1544-046X

Xuan, Yeo Yi and Ridzuan, M. J. M. and Majid, M. S. Abdul and Rahman, M. T. A. and Marsi, Noraini and Sulaiman, Mohd Hafis (2025) Effect of elevated temperatures on wear and frictional performance of Pineapple Leaf Fiber-Reinforced natural rubber composites with the addition of multi-walled carbon nanotubes. Polymer Composites, 46 (14). pp. 12835-12846. ISSN 0272-8397; eISSN: 1548-0569

Yaacob, Izzat Najmi and Gires, Ezanee and Basri, Adi Azrif and Ahmad, Kamarul Arifin and Kamal, Kamsani and Salleh, Nor Afizah and Shahedi, Suraya and Rasih, Fikri and Azizi, Zakwan and Dol, Sharul Sham and Mazlan, Norkhairunnisa (2025) Enhanced thermal performance and hydrochloric acid gas (HCl) emission mitigation in ammonium perchlorate (AP)-Based solid propellants with potassium permanganate (KMnO4)/AP dual oxidisers. Atmospheric Environment: X, 26. art. no. 100329. ISSN 2590-1621

Yaacob, Siti Zalina and Abdullah, Luqman Chuah and Lee, Chuan Li and Abdullah, Nor Hafizah and Chin, Kit Ling (2025) Enhancement of dicoumarol production by Aspergillus fumigatus using methanolic extract of Gliricidia sepium leaves: Insights into fermentation kinetics parameters. Results in Engineering, 26. art. no. 105008. pp. 1-11. ISSN 2590-1230;

Yahya, Azmi and Hassan, Haslina and Adam, Nor Mariah and Pebrian, Darius El and Mat Su, Ahmad Suhaizi (2025) Mechanisation status of oil palm nursery and field cultivation in West Malaysia. Journal of Oil Palm Research, 37 (2). pp. 312-323. ISSN 1511-2780

Yan, Yu and Wang, Jihe and Wang, Wei and Tan, Lining and Varatharajoo, Renuganth and Zhang, Chengxi (2025) Fully-distributed autonomous scheduling for Earth-observing constellations. Astrodynamics, 9. pp. 877-892. ISSN 522-0098

Yang, Xiujuan and Qiao, Shuaishuai and Yang, Feng and Huang, Yuyuan and Han, Congying and Chang, Xiao and Hao, Shuiyuan and Qian, Hui and Feng, Xinwei and Li, Na (2025) Distribution characteristics of spring maize meteorological drought in different climatic regions of Inner Mongolia based on standardized precipitation evapotranspiration index. Water (Switzerland), 17 (7). art. no. 938. pp. 1-20. ISSN 2073-4441

Yau, Zhi Yong and Shee, Yu Gang and Lim, Eng Hock and Mahdi, Mohd Adzir (2025) Optimized power coupling for enhanced wavelength switching in Brillouin-Raman fiber lasers. Optical Fiber Technology, 93. art. no. 104225. ISSN 1068-5200; eISSN: 1095-9912

Yiwen, Mok and Zulkafli, Zed and Raffar, Nurfarhana and Mohamed Rehan, Balqis and Nurulhuda, Khairudin and Chung, Jing Xiang and Tangang, Fredolin (2025) The sensitivity of rice production to transplanting date and irrigation water management in a drier climate future scenario. Paddy and Water Environment, 23 (3). pp. 511-522. ISSN 1611-2490; eISSN: 1611-2504

Yusoff, Nor Aida and Abdullah, Luqman Chuah and Md. Jamil, Siti Nurul Ain and Ting, Teo Ming and Zainuddin, Halimatun Sakdiah (2025) High-performance fixed-bed adsorption using active-site-controlled amine-functionalized adsorbent for naproxen removal: insights into isotherms, kinetics, and regeneration. Journal of Water Process Engineering, 74. art. no. 107802. pp. 1-20. ISSN 2214-7144

Yusoff, Norita Mohd and Ahmed, Mahmoud Hazzaa Mohamed and Ng, Eng Khoon and Abidin, Nadiah Husseini Zainol and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2025) Conventional soliton and noise-like pulse emissions at 1.98μ m utilizing tungsten trioxide as mode-locker. Journal of Nonlinear Optical Physics and Materials, 34 (7). art. no. 2450028. undefined-undefined. ISSN 0218-8635; eISSN: 1793-6624

Yusuf, J. and Sapuan, S.M. and Rashid, Umer and Ilyas, R.A. and Hassan, M.R. (2025) Water immersion behavior of CNF/GNP reinforced green epoxy hybrid nanocomposites. International Journal of Biological Macromolecules, 317. art. no. 144790. pp. 1-18. ISSN 0141-8130; eISSN: 1879-0003

Zahari, Nurul Azira and Mokhtar, Mohd Noriznan (2025) Techno-economic analysis of Nata De Coco as a supporting medium for immobilizing pectinase in guava juice clarification. Advances in Agricultural and Food Research Journal, 6 (1). pp. 1-23. ISSN 2735-1084

Zainuddin, Halimatun Sakdiah and Murali, Sanjeeva Kumar and Mansell, Thomas J. (2025) Engineered Stable, Antibiotic-Free, High-Level Protein Expression in the Probiotic Chassis Escherichia coli Nissle 1917. Biotechnology and Bioengineering, 123 (3). pp. 776-784. ISSN 0006-3592; eISSN: 1097-0290

Zaludin, Zairil (2025) Learning to land: autonomous quadcopter recovery from rotor loss using adaptive thrust vectoring. International Journal of Advanced Mechatronic Systems, 13 (1). pp. 1-15. ISSN 1756-8412; eISSN: 1756-8420

Zamil, Mahmud Shafayet and Zulkafli, Zed and Ab Razak, Mohd Shahrizal and Tan, Mou Leong and Yusop, Zulkifli (2025) Long-term changes in precipitation and streamflow in five major Peninsular Malaysia river basins. International Journal of Climatology, 45 (12). art. no. e70033. undefined-undefined. ISSN 0899-8418; eISSN: 1097-0088

Zhang, Kunlun and As'arry, Azizan and Shen, Xibing and Hairuddin, Abdul Aziz and Hassan, Mohd Khair and Zhu, Liucun and Qin, Weirong (2025) DSWFNet: dual-branch fusion of spatial and wavelet features for road extraction from remote sensing images. Scientific reports, 16 (1). art. no. 3966. pp. 1-17. ISSN 2045-2322

Zhang, Kunlun and As’arry, Azizan and Zhu, Liucun and Hairuddin, Abdul Aziz and Hassan, Mohd Khair and Md Zain, Mohd Zarhamdy (2025) Enhancing ride comfort of semi-active suspension through collaboration control using dung beetle optimizer optimized fuzzy PID controller. Advances in Mechanical Engineering, 17 (1). ISSN 1687-8132; eISSN: 1687-8140

Zhu, Chao-zhe and Samuel, Olusegun D. and Patel G C, Manjunath and Der, Oguzhan and Abbas, Mohamed and Hussain, Fayaz and Ting, Tin Tin (2025) Enhancing CI engine performance and emission control using a hybrid RSM–Rao algorithm for ZnO-doped castor–neem biodiesel blends. Case Studies in Thermal Engineering, 74. art. no. 106841. pp. 1-30. ISSN 2214-157X

Zisha, Shishita Zahan and Che Man, Hasfalina and Omar, Rozita and Abdul Rashid, Suraya and Ping, Tan Jian and Abdul Manaf, Shareena Fairuz and Mumtaz, Tabassum and Jamali, Nur Syakina (2025) Thermophilic biohydrogen production utilizing green-synthesized hydroxyapatite (HAP): insights into substrate optimization and biogranule formation. Applied Biochemistry and Biotechnology. ISSN 0273-2289; eISSN: 1559-0291

Zisha, Shishita Zahan and Man, Hasfalina Che and Omar, Rozita and Rashid, Suraya Abdul and Ping, Tan Jian and Fairuz, Shareena and Manaf, Abdul and Mumtaz, Tabassum and Jamali, Nur Syakina (2025) Thermophilic fermentation enhanced by eggshell-derived hydroxyapatite for sustainable hydrogen production. Bioresources and Bioprocessing, 12 (1). art. no. 136. pp. 1-18. ISSN 2197-4365

Zul Bahari, Ahmad Najman ‘Azam and Ng, Choy Peng and Wong, Mohd Muhaimin Ridwan and Mohd Rofi, Muhamad Faisharulfaizi and Ahmad, Nordila and Abas, Fuad and Law, Teik Hua (2025) Mapping disaster hazards and risks – a case study in Kuala Lumpur City (KLC). Jurnal Kejuruteraan, 37 (1). pp. 421-431. ISSN 0128-0198; eISSN: 2289-7526

Zulkeflee, Nurul Nadiah and Mustapha Kamil, Yasmin and Mashohor, Syamsiah and Abu Bakar, Muhammad Hafiz (2025) Functionalized cascaded tapered optical fiber sensor for simultaneous detection of dengue II E and SARS-CoV-2 S proteins. Biosensors and Bioelectronics, 277. art. no. 117200. pp. 1-8. ISSN 0956-5663; eISSN: 1873-4235

alwez, Mustafa Abo and Jasni, Jasronita and MohdRadzi, Mohd Amran and Azis, Norhafiz (2025) Adaptive reactive power control for voltage rise mitigation on distribution network with high photovoltaic penetration. Renewable and Sustainable Energy Reviews, 207. art. no. 114948. pp. 1-10. ISSN 1364-0321; eISSN: 1879-0690

Book Section

Ismail, Luthffi Idzhar and Ali, Siti Atiyah and Nisar, Humaira and Ab Aziz, Nurfaizatul Aisyah (2025) Understanding dyslexia and the potential of artificial intelligence in detecting neurocognitive impairment in dyslexia. In: Artificial Intelligence and Multimodal Signal Processing in Human-Machine Interaction. Elsevier, United Kingdom, pp. 151-170. ISBN 9780443291517

Conference or Workshop Item

Ab Aziz, Izzah Farhana and Che Man, Hasfalina and Mohamad Shukery, Mohamad Firdza and Mohd Jaffar, Mudzaffar Afzan and Shern, Hew Yoong and Omar, Rozita and Jamali, Nur Syakina (2025) A comparative study on the effects of co-digesting molasses with palm oil mill effluent (POME) or chicken manure on biomethane yield. In: 10th International Conference on Sustainable and Renewable Energy Engineering (ICSREE 2025), 13-16 May 2025, Nice, France. (pp. 1-7).

Abdul Rahman, Nur Afiqah and Ab. Kadir, Mohd Zainal Abidin and Abd. Wahab, Noor Izzri and Mailah, Nashiren Farzilah (2025) Optimizing tower footing resistance and arcing horn length for improving lightning performance on 275 kv transmission lines. In: The 13th Asia-Pacific International Conference on Lightning (APL 2025), 17-20 Jun 2025, Bali, Indonesia. (pp. 61-66).

Achmad Nazeem, Nabil and Mohd Ibrahim, Maslina and Che Soh, Azura and Ishak, Asnor Juraiza and Raja Ahmad, Raja Mohd Kamil and Norsahperi, Nor Mohd Haziq and Mohd Radzi, Mohd Amran (2025) Optimisation of an ash fouling model for predicting cleanliness levels in coal-fired power plant. In: The 2025 IEEE International Conference on Industry 4.0, Artificial Intelligence, and Communications Technology (IAICT), 3-5 July 2025, Bali, Indonesia. (pp. 687-693).

Azmi, Nurul Izzah and Poh, Xua Lian and Wan Abdul Karim Ghani, Wan Azlina and Sobri, Shafreeza and Haris, Nur Izzah Nabilah and Kamsani, Noor’Ain and Alias, Azil Bahari (2025) Synthesis and characteristics of bamboo-based activated carbon as electrode materials. In: 10th International Conference on Sustainable and Renewable Energy Engineering (ICSREE 2025), 13-16 May 2025, Nice, france. (pp. 1-7). (Submitted)

Dipa, Mahfida Amjad and Yaakob, Syamsuri and Fadlee, Mohd and Ahmad, Faisul Arif (2025) Design of dense fiber-wireless system with load consideration. In: The 7th International Conference on Telecommunications and Communication Engineering (ICTCE 2025), 10-12 Dec. 2025, Fukuoka, Japan. (pp. 1-5). (In Press)

Jamali, N. S. and Ismail, S. F. and Ibrahim, M. F. and Che Man, H. and Wan Abdul Karim Ghani, W. A. and Abdul Rashid, S. (2025) Effect of clay composite derived hydroxyapatite on activated carbon for biogas production. In: 17th International Conference on Sustainable Energy & Environmental Protection (SEEP2025), 28-31 Jul. 2025, Brunel University ,London. (pp. 48-52).

Khirul Ashar, Nur Dalila and Mashohor, Syamsiah and Sali, Aduwati and Jusoh, Mohamad Huzaimy and Mohd Azrul, Mohammad Habib Shah Ershad and Yoshikawa, Akimasa and Abdul Latiff, Zatul Iffah (2025) Symh index prediction with Neural Basis Expansion Analysis for Time Series (N-BEATS). In: The 11th International Exchange and Innovation Conference on Engineering & Sciences (IEICES 2025), 30-31 Oct. 2025, Kyushu University, Fukuoka City, Japan. .

Mailah, Nashiren Farzilah and Boyao, Ma (2025) Solar maximum power point tracking based on improved incremental conductance algorithm. In: 13th International Symposium on Applied Engineering and Sciences (SAES2025), 10-11 Nov. 2025, Universiti Putra Malaysia, Serdang, Malaysia. (pp. 106-107).

Mohd Nasir, Mohd Solehin and Abidin Ab Kadir, Mohd Zainal and Mohd Radzi, Mohd Amran and Azis, Norhafiz and Osman, Miszaina and Farina Mohamad Nasir, Nur Alia (2025) On the effect of rolling sphere penetration and rod spacing configurations in optimizing lightning protection for solar farms. In: The 13th Asia-Pacific International Conference on Lightning (APL 2025), 17-20 Jun 2025, Bali, Indonesia. (pp. 348-353).

Phang, Ing Teck and Ishak, Asnor Juraiza and Ahmad, Siti Anom and Shibata, Tomohiro (2025) Evaluating AI-assisted motion tracking for knee rehabilitation: a comparative analysis of You Only Look Once version 8 (YOLOv8) and MediaPipe. In: 6th International Conference on Electrical, Communication and Computer Engineering, ICECCE 2025, 27 - 28 Aug. 2025, Istanbul, Turkiye. (pp. 1-6).

Shamsul, Izhar and Siti Nusyazilla, Zaki (2025) Integrating household e-waste with generator, collection center and recovery facilities for improvement of scheduled waste management in Malaysia. In: The 8th International Conference on Industrial and Hazardous Waste Management, 27-31 May 2025, Crete, Greece. . (Unpublished)

Newspaper

Mohammad Ali, Hidayatullah Malaysia's future at risk as graduates leave. in The Star, (8 September 2025), p. 13. (Call Number: UNSPECIFIED)

Teik Hua, Law Tubuh pasukan khas perketat penguatkuasaan. (6 January 2025), (Call Number: UNSPECIFIED)

Utusan Malaysia, . Caj kesesakan perlu seiring pengangkutan awam efisien. in Utusan Malaysia, (3 March 2025), p. 5. (Call Number: UNSPECIFIED)

Zabidi, Aidiel Turapan jalan raya tidak berkualiti. in Utusan Malaysia, (17 February 2025), p. 1. (Call Number: UNSPECIFIED)

UPM News

Ab Rahim, Ameesya Aghniya (2025) EIE2025: platform pelajar dan penyelidik UPM tonjolkan inovasi teknologi berpotensi komersial. [UPM News]

Ab Rahim, Ameesya Aghniya (2025) UPM lancar Projek Turapan Jalan FMA20 PG76 hasil inovasi Fakulti Kejuruteraan. [UPM News]

Amir Ahmad, Nurin Amyra (2025) UPM, JKR Sabah dan Petronas teroka kerjasama Teknologi Bitumen Kitar Semula. [UPM News]

Juferi, Noor Eszereen (2025) Menteri Pendidikan Tinggi lawat fasiliti Solar Terapung UPM. [UPM News]

Juferi, Noor Eszereen (2025) Pelajar UPM raih anugerah di Pertandingan Roket Antarabangsa. [UPM News]

Juferi, Noor Eszereen (2025) Pelajar UPM terima anugerah Outstanding PhD SEARCA Scholar. [UPM News]

Juferi, Noor Eszereen (2025) UPM rangkul Anugerah Teknologi Terbaik ROBOCON 2025. [UPM News]

Kamarul Arefin, Nur Syamila (2025) Pelajar UPM cipta inovasi Movemate, tingkat kualiti hidup pengguna kerusi roda. [UPM News]

Universiti Putra Malaysia (2025) Pelajar UPM juara pertandingan antarabangsa di Eindhoven Semicon Summer School 2025. [UPM News]

Universiti Putra Malaysia (2025) Pelajar UPM tonjol bakat seni pentas melalui The Sound of Music. [UPM News]

Universiti Putra Malaysia (2025) Pendidikan tinggi penting walaupun bergelar atlet elit – Nurul Ain Fitri. [UPM News]

Universiti Putra Malaysia (2025) UPM raih Naib Johan Anugerah Tenaga Asean 2025. [UPM News]

Universiti Putra Malaysia (2025) UPM terajui penerbitan Buku Teknologi Pintar Sawit Bersama MPOB. [UPM News]

This list was generated on Wed Apr 29 03:18:45 2026 +08.

Export as	Atom RSS 1.0 RSS 2.0