Items where Division is "Faculty of Engineering" and Year is 2025

Abd Rahman, Nurul Izzah and Ismail, Muhammad Nazirul Iszat (2025) Cognitive ergonomic-driven technology: a pathway to improve mental workload, body posture, and work performance of ageing workers in office setting. Interdisciplinary Description of Complex Systems, 23 (2). pp. 118-129. ISSN 1334-4676; eISSN: 1334-4684

Abdulghani, Abdulrahman M. and Abdullah, Azizol and Rahiman, A. R. and Abdul Hamid, Nor Asilah Wati and Akram, Bilal Omar and Raissouli, Hafsa (2025) Navigating the complexities of controller placement in SD-WANs: a multi-objective perspective on current trends and future challenges. Computer Systems Science and Engineering, 49 (1). pp. 123-157. ISSN 0267-6192

Abdullah, Muhd Afiq Hizami and Rashid, Raizal S.M. and Alnutayfat, Abdullah (2025) Determination of the mechanical properties and gamma-neutron shielding effectiveness of ultra-high performance dense concrete (UHPdC) exposed to high temperatures. Case Studies in Construction Materials, 22. art. no. e04157. pp. 1-21. ISSN 2214-5095; eISSN: 2214-5095

Abood Ahmed, Rabah and Samsudin, Khairulmizam (2025) Double adjacent error correction codes for ultra-fast cache memories. IEEE Access, 13. pp. 1-11. ISSN 2169-3536; eISSN: 2169-3536

Ahsan, Amimul and Mat Ali, Muhamad Jasarudin Bin and Rashid, Md. Redowan and Kabir, Mozaher Ul and Shafiquzzaman, Md. and Imteaz, Monzur and Idrus, Syazwani and Aljaradin, Mohammad and Alresheedi, Mohammad T. (2025) Sustainable leachate treatment by integrating electrolysis with palm-shell activated carbon contactor for environmental protection. Scientific Reports, 15. art. no. 560. pp. 1-13. ISSN 2045-2322; eISSN: 2045-2322

Alias, Nor Halaliza and Abdullah, Luqman Chuah and Yaw, Thomas Choong Shean and Md Jamil, Siti Nurul Ain and Ting, Teo Ming and Asis, Ahmad Jaril and Lee, Chuan Li and Adeyi, Abel Adekanmi (2025) Esterification of kenaf core fiber as a potential adsorbent for oil removal from palm oil mill effluent (POME). Processes, 13 (2). art. no. 63. pp. 1-26. ISSN 2227-9717

Amir Ahmad, Nurin Amyra (2025) UPM, JKR Sabah dan Petronas teroka kerjasama Teknologi Bitumen Kitar Semula. [UPM News]

Azid, Nuramirah and Abdullah, Ermira Junita and Harmin, Mohammad Yazdi (2025) Self-sensing morphing wing using shape memory alloy actuator. Journal of Aeronautics, Astronautics and Aviation, 57 (3S). pp. 785-800. ISSN 1990-7710

Azmi, Nazatul Shima and Kadir Basha, Roseliza and Othman, Siti Hajar and P. Mohammed, Mohd Afandi and Wakisaka, Minato and Ariffin, Siti Hajar and Salim, Nur Hafizah (2025) Development of fish gelatin film for anti-fogging mushroom packaging. Journal of Food Engineering, 387. art. no. 112306. pp. 1-7. ISSN 0260-8774

Azmi, Nurul Izzah and Poh, Xua Lian and Wan Abdul Karim Ghani, Wan Azlina and Sobri, Shafreeza and Haris, Nur Izzah Nabilah and Kamsani, Noor’Ain and Alias, Azil Bahari (2025) Synthesis and characteristics of bamboo-based activated carbon as electrode materials. In: 10th International Conference on Sustainable and Renewable Energy Engineering (ICSREE 2025), 13-16 May 2025, Nice, france. (pp. 1-7). (Submitted)

Berman, Renan Belli and Almeida, Renato Saint Martin and Mohamed Ariff, Azmah Hanim and de Pieri, Edson Roberto and Al-Qureshi, Hazim Ali (2025) Novel approach for predicting the creep behavior of ceramic fibers using dimensional analysis. International Journal of Applied Ceramic Technology, 22 (1). art. no. e14876. pp. 1-8. ISSN 1546-542X; eISSN: 1744-7402

Chandra, Devi and Nukman, Y. and Azka, Muhammad Adlan and Sapuan, S.M. and Yusuf, J. (2025) Review on integral stiffened panel of aircraft fuselage structure. Defence Technology, 46. pp. 1-11. ISSN 2214-9147

Desouqi, Dalal and Mohd Salleh, Mohamad Amran and Roselee, Muhammad Hatta and M. Yahya, Aisyah and Alsalam, Bushra Abdo and Abdul Rashid, Suraya (2025) Mineralogical and petrographic characterisation of flake graphite in the graphite mica schist rocks from the Nubian Desert, Sudan. Scientific African, 27. art. no. e02602. pp. 1-13. ISSN 2468-2276

Dzulkafli, Mohd Firdaus and Hairuddin, Abdul Aziz and Al Anbagi, Muntasser Abdulabbas Mossa (2025) The impact of air pressure on performance, combustion behavior, and emissions of an air-assisted port fuel injection HCCI engine. Pertanika Journal of Science and Technology, 33 (1). pp. 491-506. ISSN 0128-7680; eISSN: 2231-8526

Falih, Ammar Ahmed and Ahmad Anas, Siti Barirah and A. Rasid, Mohd Fadlee and Hanafi, Marsyita (2025) Advancing 5G communication systems: a novel method for OOBE suppression in Filter-OFDM waveforms. Journal of Communications, 20 (2). pp. 113-130. ISSN 1796-2021

Fatchurrahman, Danial and Hilaili, Maulidia and Nurwahyuningsih and Russo, Lucia and Jahari, Mahirah and Fathi-Najafabadi, Ayoub (2025) Utilizing RGB Imaging and Machine Learning for freshness level determination of green bell pepper (Capsicum annuum L.) throughout its shelf-life. Postharvest Biology and Technology, 222. art. no. 113359. pp. 1-10. ISSN 0925-5214; eISSN: 0925-5214

Ghaedi, Khaled and Javanmardi, Ahad and Ibrahim, Zainah and Rashid, Raizal and Gordan, Meisam and Khatibi, Hamed (2025) Experimental parametric study on the effect of diameter and number of bars on the cyclic performance of bar damper. Structures, 72. art. no. 108164. pp. 1-11. ISSN 2352-0124; eISSN: 2352-0124

Ghobadi, Vahideh and Ismail, Luthffi Idzhar and Wan Hasan, Wan Zuha and Ahmad, Haron and Ramli, Hafiz Rashidi and Norsahperi, Nor Mohd Haziq and Tharek, Anas and Hanapiah, Fazah Akhtar (2025) Challenges and solutions of deep learning-based automated liver segmentation: a systematic review. Computers in Biology and Medicine, 185. art. no. 109459. pp. 1-15. ISSN 0010-4825; eISSN: 1879-0534

Hafidh Said, Al Baalawy Said and Salim, Salim Mkubwa and Romli, Fairuz Izzuddin (2025) Conceptual design exploration of a new aircraft passenger seat's tray table with adjustable height. Journal of Aeronautics, Astronautics and Aviation, 57 (3S). pp. 667-678. ISSN 1990-7710

Huang, Wentao and Yang, Haonan and Wang, Yangfeng and Ding, Phebe and Nawi, Nazmi Mat and Zhang, Xiaoshuan (2025) In-situ precision sensing for smart agriculture using multi-electrode sensor array systems in orchards. Sensors and Actuators A: Physical, 382. art. no. 116134. pp. 1-13. ISSN 0924-4247; eISSN: 0924-4247

Husin, Nur Azuan and Bejo, Siti Khairunniza and Md Noh, Normahnani and Ridu, Ray Clement (2025) Growth monitoring of healthy and BSR-infected oil palm seedlings using ground-based LiDAR. Pertanika Journal of Science and Technology, 33 (3). pp. 1137-1158. ISSN 0128-7680; eISSN: 2231-8526

Juferi, Noor Eszereen (2025) UPM rangkul Anugerah Teknologi Terbaik ROBOCON 2025. [UPM News]

Kamil Kayode, Katibi and Azis, Rabaah Syahidah and Garba Shitu, Ibrahim and Ismail, Ismayadi and Soo Kien, Chen and Kean Pah, Lim and Awang Kechik, Mohd Mustafa and Md Yunos, Khairul Faezah and Abdulhameed Amusa, Abiodun (2025) Tuning synthesis temperature spectrum to unlock multifunctional potential in multi-walled carbon nanotubes for EMI shielding and optical applications. Journal of Industrial and Engineering Chemistry, 146. pp. 826-852. ISSN 1226-086X

Karunakaran, Sivasanghari and Abang Abdul Majid, Dayang Laila (2025) Induction heating method for thermomechanical study of NiTi shape memory alloy wire. Journal of Aeronautics, Astronautics and Aviation, 57 (3S). pp. 593-603. ISSN 1990-7710

Kazeem, Muinat Olanike and Abbasiliasi, Sahar and Shun, Tan Joo and Baharuddin, Azhari Samsu and Abdul Rahman, Nor’ Aini (2025) Primary recovery of carboxymethyl cellulase from Thermophilic Bacillus licheniformis 2d55 using an aqueous two-phase system. Pertanika Journal of Science and Technology, 33 (1). pp. 1-19. ISSN 0128-7680; eISSN: 2231-8526

Khalid, Asma and Dahlan, Nur Dalilah and Abas, Mohd Firdaus and Ahmad, Kamarul Arifin and Shahidan, Mohd Fairuz (2025) The impact of wind catchers on thermal comfort and indoor air quality: An analysis of subtropical climate for summer and winter. Indoor and Built Environment, 34 (4). art. no. 4. pp. 838-867. ISSN 1420-326X; eISSN: 1423-0070

Lang, Yiming and Ng, Michelle Xin Yi and Yu, Kai Xiang and Chen, Binghui and Tan, Peng Chee and Tan, Khang Wei and Lam, Weng Hoong and Siwayanan, Parthiban and Kim, Kek Seong and Choong, Thomas Shean Yaw and Ten, Joon Yoon and Ban, Zhen Hong (2025) A novel CFD-MILP-ANN approach for optimizing sensor placement, number, and source localization in large-scale gas dispersion from unknown locations. Digital Chemical Engineering, 14. art. no. 100216. pp. 1-22. ISSN 2772-5081; eISSN: 2772-5081

Lawal, Ismail and Shafie, Suhaidi and Pandey, Shyam S. and Jafaar, Haslina and Mustafa, Mohd Amrallah and Ismail, Ismayadi and Ahmad Kamarudin, Mazliana and Mohd Noor, Ikhwan Syafiq and Liu, Xinzhi and AlSultan, Hussein A. and Babani, Suleiman and Abdulhamid, Ibrahim Bako and Norddin, Nurbahirah (2025) Maximizing solar energy harvesting: enhancing the efficiency of bifacial dye-sensitized solar cells with Graphenated carbon nanotubes composites in multi-layered stacked photoanode. Optical Materials, 160. art. no. 116721. pp. 1-11. ISSN 0925-3467 (In Press)

Ma, Ziwei and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Azis, Norhafiz and Ma, Yanhua (2025) Improved electrogeometric model for shielding failure evaluation of double-circuit UHVAC transmission lines based on leader propagation simulations. Electric Power Systems Research, 239. art. no. 111240. pp. 1-12. ISSN 0378-7796; eISSN: 0378-7796

Mahzan, Najwa Nasuha and Lutfi Othman, Mohammad and Izzri Abdul Wahab, Noor and Veerasamy, Veerapandiyan and Salim, Nur Ashida and Azwin Zainul Abidin, Aidil and Zahurul Islam, Syed (2025) Performance analysis of intelligent classifiers for high impedance fault detection in a PV-integrated IEEE-13 bus system. IEEE Canadian Journal of Electrical and Computer Engineering, 48 (2). art. no. https://ieeexplore.ieee.org/document/10970376. pp. 98-108. ISSN 2694-1783

Md Sam, Nor Syahidah and Krishnen, Ganisan and Baharulrazi, Norfhairna and Abdullah, Luqman Chuah and Majid, Rohah A. (2025) Toward eco-friendly fertilizers: modulating nutrient release from biopolyurethane coatings by adjusting isocyanate index and polyol percentage. Environmental Quality Management, 34 (4). art. no. e70072. pp. 1-15. ISSN 1088-1913; eISSN: 1520-6483

Mohamad, Shahril and Abdullah, Luqman Chuah and Jamari, Saidatul Shima and Sy Mohamad, Sharifah Fathiyah (2025) Remediation of the oil palm frond juice base medium via efficient pretreatment and dilution factor strategy for bacterial cellulose production yield enhancement. International Journal of Biological Macromolecules, 311 (pt.3). art. no. 143744. pp. 1-11. ISSN 0141-8130; eISSN: 1879-0003

Mohd Isnan, Siti Sarah and Abdullah, Ahmad Fikri and Mohamed Shariff, Abdul Rashid and Ishak, Iskandar and Syed Ismail, Sharifah Norkhadijah and Tai, Doria and Appanan, Maheshwara Rao (2025) Leveraging computational model approach in understanding infectious disease: a case study in Sabah, Malaysia. Pertanika Journal of Science and Technology, 33 (2). pp. 653-676. ISSN 0128-7680; eISSN: 2231-8526

Mohd Sani, Fareisya Zulaikha and Rohidi, Muhammad Adam and Mohd Nor, Elya and Md Ali, Syaril Azrad and Makhtar, Siti Noormiza (2025) Comparison of classification models and accelerometer sensors for VTOL UAV flight condition detection. Journal of Aeronautics, Astronautics and Aviation, 57 (3). pp. 737-749. ISSN 1990-7710

Murshiduzzaman and As'Arry, Azizan and Lim, Wei Keong and Mohamed Yusoff, Mohd Zuhri and Salit, Mohd Sapuan and Supeni, Eris Elianddy and Wan Hasan, Wan Zuha and Yussof, Hanafiah (2025) Analysis of an automated solar panel cleaning robot on photovoltaics (PV) module frames with composites materials. Physical Sciences Reviews, 10 (4). pp. 381-394. ISSN 2365-659X;

Othman, Ahmad Fauzi and Othman, Mohammad Lutfi and Ab Kadir, Mohd Zainal Abidin and Abdul Wahab, Noor Izzri and Zainul Abidin, Aidil Azwin (2025) Optimizing voltage profile and mitigating power losses in distribution network reconfiguration via the integration of distributed generation penetration in Malaysia. Journal of Advanced Research in Applied Mechanics, 133 (1). pp. 120-134. ISSN 2289-7895; eISSN: 2289-7895

Pua’at, Afifi A. and Zhahir, Amzari and Ahmad, Mohamed Tarmizi and Hassan, Aziz and Abdul Hamid, Mohd Faisal and Gires, Ezanee (2025) Conceptual design of a new two-seater hoverwing craft. Journal of Aeronautics, Astronautics and Aviation, 57 (3). pp. 815-826. ISSN 1990-7710

Ramli, Nurhayati and Muhammad Rashid, Raizal Saifulnaz and Mohd Nasir, Noor Azline and Voo, Yen Lei and Masenwat, Noor Azreen and Abdul Karim, Julia (2025) Modified ultra high-performance concrete with boron carbide for neutron and gamma radiation shielding. Construction and Building Materials, 467 (140421). art. no. 140421. pp. 1-8. ISSN 0950-0618

Robane, Nor Syamimi Amalina and Chong Vui San, Michael and Md Said, Mohamad Syazarudin and Mohd Tohir, Mohd Zahirasri (2025) Parametric investigation of acetone liquid pool fire experiments on fire characteristics. Process Safety and Environmental Protection, 194. pp. 604-618. ISSN 0957-5820

Salim, Salim Mkubwa and Romli, Fairuz Izzuddin and Harmin, Mohammad Yazdi and Mazlan, Norkhairunnisa and Abang Abdul Majid, Dayang Laila (2025) Establishment of seat pitch and seat tray table’s height as significant factors for aircraft passengers’ flight comfort through triangulation method. Journal of Aeronautics, Astronautics and Aviation, 57 (3S). pp. 295-307. ISSN 1990-7710

Santos Lula Barros, Letícia and Hiraki, Koju and Assis da Silveira, Marcelo and Chak, Yew Chung and Abdullah, Amirul Fiqri and Varatharajoo, Renuganth (2025) Potential of non-flat solar sail for higher characteristic acceleration. Advances in Space Research, 75 (2). pp. 2289-2306. ISSN 0273-1177; eISSN: 1879-1948

Shamsul, Izhar and Siti Nusyazilla, Zaki (2025) Integrating household e-waste with generator, collection center and recovery facilities for improvement of scheduled waste management in Malaysia. In: The 8th International Conference on Industrial and Hazardous Waste Management, 27-31 May 2025, Crete, Greece. . (Unpublished)

Siajam, Shamsul Izhar and Zainuddin, Halimatun Sakdiah and Sabli, Nordin and Yeow, Wen Feng and Yoshida, Hiroyuki (2025) Preparation of activated carbon from paper mill sludge waste activated by superheated steam. International Journal of Nano and Biomaterials, 11 (1). pp. 1-8. ISSN 1752-8933; eISSN: 1752-8941

Singh, Spoorthi and Zuber, Mohammad and Bhat, Naman and Kumar.S, Rathina and Basri, Ernnie Illyani and Ahmad, Kamarul Arifin and Yadav, Manish Varun and Hegde, Navya Thirumaleshwar (2025) Bio-inspired robotics: kinematic and gait analysis of quad and hexa-legged systems. Journal of Robotics and Control (JRC), 6 (2). pp. 757-768. ISSN 2715-5072; eISSN: 2715-5056

Sivaraos and Phanden, Rakesh Kumar and Lee, K. Y. Sara and Abdullah, E. J. and Kumaran, K. and Al-Obaidi, A. S. M. and Devarajan, R. (2025) Artificial neural network for performance modelling of shape memory alloy. International Journal on Interactive Design and Manufacturing. ISSN 1955-2513; eISSN: 1955-2505

Tay, Chai Hua and Mazlan, Norkhairunnisa and Wayayok, Aimrun and Basri, Mohd Salahuddin and Albakri Abdullah, Mohd Mustafa (2025) Zeolite based foamed geopolymer concrete reinforced with Cellulose Nanofibril prepared in low concentration alkaline solution: Porosity, compressive strength, and water permeability. Journal of Cleaner Production, 489. art. no. 144609. pp. 1-16. ISSN 0959-6526

Teik Hua, Law Tubuh pasukan khas perketat penguatkuasaan. (6 January 2025), (Call Number: UNSPECIFIED)

Utusan Malaysia, . Caj kesesakan perlu seiring pengangkutan awam efisien. in Utusan Malaysia, (3 March 2025), p. 5. (Call Number: UNSPECIFIED)

Wirawan, Willy Artha and Sabitah, Ayan and Sakti, Gunawan and Harianto, Bambang Bagus and Agus Choiron, Moch. and Ilyas, R.A. and Sapuan, S.M. and Prasetijo, Joewono (2025) Crashworthiness characteristic of aluminum/composite hybrid tubes under axial compression. Results in Engineering, 25. art. no. 103889. pp. 1-14. ISSN 2590-1230; eISSN: 2590-1230

Wirawan, Willy Artha and Wulansari, Ajeng and Sabitah, Ayan and Putra, Muhammad Rezki Fitri and Gapsari, Femiana and Sartika, Dewi and Ilyas, R.A. and Sapuan, S.M. (2025) Characteristics of naturally woven Waru bark fiber for eco-friendly composite reinforcement. International Journal of Biological Macromolecules, 295. art. no. 139459. pp. 1-10. ISSN 0141-8130; eISSN: 1879-0003

Yaacob, Siti Zalina and Abdullah, Luqman Chuah and Lee, Chuan Li and Abdullah, Nor Hafizah and Chin, Kit Ling (2025) Enhancement of dicoumarol production by Aspergillus fumigatus using methanolic extract of Gliricidia sepium leaves: Insights into fermentation kinetics parameters. Results in Engineering, 26. art. no. 105008. pp. 1-11. ISSN 2590-1230;

Yusoff, Nor Aida and Abdullah, Luqman Chuah and Md. Jamil, Siti Nurul Ain and Ting, Teo Ming and Zainuddin, Halimatun Sakdiah (2025) High-performance fixed-bed adsorption using active-site-controlled amine-functionalized adsorbent for naproxen removal: insights into isotherms, kinetics, and regeneration. Journal of Water Process Engineering, 74. art. no. 107802. pp. 1-20. ISSN 2214-7144

Zabidi, Aidiel Turapan jalan raya tidak berkualiti. in Utusan Malaysia, (17 February 2025), p. 1. (Call Number: UNSPECIFIED)