Items where Division is "Faculty of Engineering" and Year is 2016

Group by: Creators | Item Type | No Grouping

Jump to: Article | Book Section | Conference or Workshop Item | Newspaper | Thesis

Number of items: 911.

Article

A. Alrazen, Hayder and Abu Talib, Abd. Rahim and Adnan, R. and Ahmad, Kamarul Arifin (2016) A review of the effect of the hydrogen addition on the performance and emission of the compression-ignition engine. Renewable and Sustainable Energy Reviews, 54. pp. 785-796. ISSN 1364-0321; ESSN: 1879-0690

Ab Kadir, Mohd Zainal Abidin (2016) Lightning severity in Malaysia and some parameters of interest for engineering applications. Thermal Science, 20 (suppl.2). S437-S450. ISSN 0354-9836; ESSN: 2334-7163

Abas, M. F. and Aftab, Syed Mohammed Aminuddin and Mohd Rafie, Azmin Shakrine and Yusoff, Hamid and Ahmad, Kamarul Arifin (2016) Flapping membrane wing: a prediction towards inter-domain flight. Pertanika Journal of Science & Technology, 24 (2). pp. 439-449. ISSN 0128-7680; ESSN: 2231-8526

Abd Hamid, Hamidah and Yunus, Robiah and Rashid, Umer and Choong, Thomas Shean Yaw and Ali, Salmiaton and Muhammad Syam, Azhari (2016) Synthesis of high oleic palm oil-based trimethylolpropane esters in a vacuum operated pulsed loop reactor. Fuel, 166. pp. 560-566. ISSN 0016-2361; ESSN: 1873-7153

Abd Rahman, Nur Farhana and Shamsudin, Rosnah and Ismail, Amin and Abdul Karim Shah, Nor Nadiah (2016) Effects of post-drying methods on pomelo fruit peels. Food Science and Biotechnology, 25 (1). pp. 85-90. ISSN 1226-7708; ESSN: 2092-6456

Abd. Karim, Izian and Mohammed, Kachalla (2016) Composite slab numerical strength test method under M-K approach. International Journal of Mechanical and Production Engineering, 4 (9). pp. 42-46. ISSN 2320-2092; ESSN: 2321-2071

Abduhamed, A. J. and Adam, Nor Mariah and Hairuddin, Abdul Aziz and Kareem, H. K. (2016) Design and fabrication of a heat exchanger for portable solar water distiller system. International Food Research Journal, 23 (suppl.). S15-S22. ISSN 1985-4668; ESSN: 2231-7546

Abdul Aziz, Noor Hafizah and Raja Abdullah, Raja Syamsul Azmir (2016) RCS classification on ground moving target using LTE passive bistatic radar. Journal of Scientific Research and Development, 3 (2). pp. 57-61. ISSN 1115-7569

Abdul Aziz, Noor Hafizah and Raja Abdullah, Raja Syamsul Azmir (2016) Speed recognition based on ground vehicle in passive forward scattering radar. Journal of Telecommunication, Electronic and Computer Engineering, 8 (3). pp. 133-137. ISSN 2180-1843; ESSN: 2289-8131

Abdul Aziz, Noor Hafizah and Raja Abdullah, Raja Syamsul Azmir (2016) A passive forward scattering radar for detecting humans and characterizing human behaviours. Australian Journal of Basic and Applied Sciences, 10 (spec.11). pp. 112-118. ISSN 1991-8178; ESSN: 2309-8414

Abdul Aziz, Siti Aishah and Azmi, Mohd Hafrizal and Nordin, Abdul Jalil and Ahmad Saad, Fathinul Fikri and Ibrahim, Normala and Wan Adnan, Wan Azizun and Saripan, M. Iqbal (2016) Voxel-based morphometric difference in metabolic activity of 50 to 73 years old healthy adult brain: A PET/CT study. International Journal of Control Theory and Applications, 9 (31). pp. 37-43. ISSN 0974-5572

Abdul Karim Shah, Nor Nadiah and Shamsudin, Rosnah and Abdul Rahman, Russly and Mohd Adzahan, Noranizan (2016) Fruit juice production using ultraviolet pasteurization: a review. Beverages, 2 (3). pp. 1-20. ISSN 2306-5710

Abdul Karim Shah, Nor Nadiah and Shamsudin, Rosnah and Abdul Rahman, Russly and Mohd Adzahan, Noranizan (2016) Furan development in Dean vortex UVC treated pummelo (Citrus grandis L. Osbeck) fruit juice. International Food Research Journal, 23 (suppl.). S113-S118. ISSN 1985-4668; ESSN: 2231-7546

Abdul Khader, Shah Mohammed and Adathala, Rajeev and Ayachit, Anurag and Pai, Raghuvir and Vayalappil, Muraleedharan C. and Zuber, Mohammad and Rao, V. R. K. (2016) Experimental and numerical study of stenotic flows. Journal of Medical Imaging and Health Informatics, 6 (6). pp. 1500-1506. ISSN 2156-7018; ESSN: 2156-7026

Abdul Rahman, Nor Farahaida and Mohd Radzi, Mohd Amran and Che Soh, Azura and Mariun, Norman and Abd Rahim, Nasrudin (2016) Adaptive hybrid fuzzy-proportional plus crisp-integral current control algorithm for shunt active power filter operation. Energies, 9 (737). pp. 1-18. ISSN 1996-1073; ESSN: 1996-1073

Abdul Rahman, Roshanida and Molla, Abul Hossain and Barghash, Hind F. A. and Ahmadun, Fakhru'l-Razi (2016) Optimization of process parameters for pilot-scale liquid-state bioconversion of sewage sludge by mixed fungal inoculation. Environmental Technology, 37 (1). pp. 1-15. ISSN 0959-3330; ESSN: 1479-487X

Abdul Raof, Nurliyana and Rashid, Umer and Yunus, Robiah and Azis, Norhafiz and Yaakub, Zaini (2016) Development of palm - based neopentyl glycol diester as dielectric fluid and its thermal aging performance. IEEE Transactions on Dielectrics and Electrical Insulation, 23 (4). pp. 2051-2058. ISSN 1070-9878; ESSN: 1558-4135

Abdul Rashid, Zulkifli and Alias, Azil Bahari and Ku Hamid, Ku Halim and Wan Omar, W. A. and Wan Abdul, K. G. (2016) Optimization of food waste utilization in the RDF recovery energy facility. International Food Research Journal, 23 (suppl.). S37-S43. ISSN 1985-4668; ESSN: 2231-7546

Abdullah, Ahmad Fikri and Wan Mustapa, Wan Amirul (2016) Groundwater conceptual model for paddy irrigation. Jurnal Teknologi, 78 (1-2). pp. 111-117. ISSN 0127–9696; ESSN: 2180–3722

Abdullah, M. N. and Muda, M. K. H. and Mustapha, F. and Yaakob, M. S. (2016) Oblique impact analysis of cycling helmets made from kenaf (Hibiscus cannabinus) and flax (Linum usitatissimum) natural fiber. Movement, Health & Exercise, 5 (1). pp. 57-67. ISSN 2231-9409; ESSN: 2289-9510

Abdullahi, Saleh and Pradhan, Biswajeet (2016) Sustainable brownfields land use change modeling using GIS-based weights-of-evidence approach. Applied Spatial Analysis and Policy, 9 (1). pp. 21-38. ISSN 1874-463X; ESSN: 1874-4621

Abdulrazzaq, Bilal Isam and Abdul Halin, Izhal and Kawahito, Shoji and Mohd Sidek, Roslina and Shafie, Suhaidi and Md Yunus, Nurul Amziah (2016) A review on high-resolution CMOS delay lines: towards sub-picosecond jitter performance. SpringerPlus, 5. art. no. 434. pp. 1-32. ISSN 2193-1801

Abdulrazzaq, Bilal Isam and Ibrahim, Omar J. and Kawahito, Shoji and Mohd Sidek, Roslina and Shafie, Suhaidi and Md Yunus, Nurul Amziah and Lee, Lini and Abdul Halin, Izhal (2016) Design of a sub-picosecond jitter with adjustable-range CMOS delay-locked loop for high-speed and low-power applications. Sensors, 16 (10). art. no. 1593. pp. 1-15. ISSN 1424-8220

Abdulwahab, Abdullah Mohamed and Adam, Nor Mariah and As'arry, Azizan (2016) Experimental works on the influence of Malaysian kitchen temperature on the energy consumption of domestic refrigerator. International Journal of Applied Engineering Research, 11 (19). pp. 10027-10038. ISSN 0973-4562; ESSN: 1087-1090

Abid Muslim, Farah Kamil and Tang, Sai Hong and Khaksar, Weria and Zulkifli, Norzima and Ahmad, Siti Azfanizam (2016) Obstacles avoidance mobile robot system in uncertain and ever-changing surroundings. Pertanika Journal of Scholarly Research Reviews, 2 (2). pp. 103-120. ISSN 2462-2028

Abu, Mohd Azlan and Harun, Harlisya and Harmin, Mohammad Yazdi and Abdul Wahab, Noor Izzri and Abdul Kadir, Muhd Khairulzaman (2016) The design of viterbi decoder for low power consumption space time trellis code without adder architecture using RTL model. World Journal of Engineering, 13 (6). pp. 540-546. ISSN 1708-5284; ESSN: 1708-5284

Abu Bakar, Ayu Haslija and Koay, Yin Shin and Ching, Yern Chee and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Alkhatib, Ma'an and Mobarekeh, Mohsen Nourouzi and Mohd Zahri, Nur Amirah (2016) Removal of fluoride using quaternized palm kernel shell as adsorbents: equilibrium isotherms and kinetics studies. BioResources, 11 (2). pp. 4485-4511. ISSN 1930-2126

Abu Bakar, Mohd Rizam and Bakheet, Abdul Jabbar Khudhur and Kamil, Farah and Kalaf, Atiya and Abbas, Iraq T. and Lee, Lai Soon (2016) Enhanced simulated annealing for solving aggregate production planning. Mathematical Problems in Engineering, 2016. art. no. 1679315. pp. 1-9. ISSN 1024-123X; ESSN: 1563-5147

Abu Hanifah, Rabiatuladawiyah and Toha, Siti Fauziah and Hassan, Mohd Khair and Ahmad, Salmiah (2016) Power reduction optimization with swarm based technique in electric power assist steering system. Energy, 102. pp. 444-452. ISSN 0360-5442; ESSN: 1873-6785

Aburkaba, Eltaher Elzarroug and Muniandy, Ratnasamy (2016) Experimental study of high temperature properties and rheological behavior of ceramic modified asphalt. Australian Journal of Basic and Applied Sciences, 10 (6). pp. 150-161. ISSN 1991-8178; ESSN: 2309-8414

Adebayo, Segun Emmanuel and Hashim, Norhashila and Abdan, Khalina and Hanafi, Marsyita (2016) Application and potential of backscattering imaging techniques in agricultural and food processing – a review. Journal of Food Engineering, 169. pp. 155-164. ISSN 0260-8774; ESSN: 1873-5770

Adebayo, Segun Emmanuel and Hashim, Norhashila and Abdan, Khalina and Hanafi, Marsyita and Mollazade, Kaveh (2016) Prediction of quality attributes and ripeness classification of bananas using optical properties. Scientia Horticulturae, 212. pp. 171-182. ISSN 0304-4238

Adeleke, Abdulrahman Oyekanmi and Ahsan, Amimul and Nik Daud, Nik Norsyahariati and Abdul Latiff, Ab Aziz and Denkenberger, David and Zawawi, Daud and Mat Daud, NurFalilah (2016) Geospatial analysis of lake water quality parameters in Selangor, Malaysia using GIS. Journal of Desalination and Water Purification, 2 (1). pp. 14-21. ISSN 0128-2387

Aftab, Syed Mohammed Aminuddin and Abdul Razak, Norizham and Mohd.Rafie, Azmin Shakrine and Ahmad, Kamarul Arifin (2016) Mimicking the humpback whale: an aerodynamic perspective. Progress in Aerospace Sciences, 84. pp. 48-69. ISSN 0376-0421; ESSN: 1873-1724

Aftab, Syed Mohammed Aminuddin and Mohd Rafie, Azmin Shakrine and Abdul Razak, Norizham and Ahmad, Kamarul Arifin (2016) Turbulence model selection for low Reynolds number flows. PLOS ONE, 11 (4). art. no. e0153755. pp. 1-15. ISSN 1932-6203

Aghdam, Iman Nasiri and Varzandeh, Mohammad Hossein Morshed and Pradhan, Biswajeet (2016) Landslide susceptibility mapping using an ensemble statistical index (Wi) and adaptive neuro-fuzzy inference system (ANFIS) model at Alborz Mountains (Iran). Environmental Earth Sciences, 75 (7). art. no. 553. pp. 1-20. ISSN 1866-6280; ESSN: 1866-6299

Ahmad, Mohd Azwan and Mohammad, Abdul Wahab and Choong, Thomas Shean Yaw and Chuah Abdullah, Luqman (2016) Effects of organo-floc as natural coagulant on posttreatment of ultrafiltration membrane. Pollution Research, 35 (2). pp. 233-239. ISSN 0257-8050

Ahmad, Nadzrol Fadzilah and Muniandy, Ratnasamy and Hassim, Salihudin and Aburkaba, Eltaher Elzarroug (2016) Laboratory performance of chained interlocking plastic-beads in stone mastic asphalt mixture. Australian Journal of Basic and Applied Sciences, 10 (10). pp. 178-184. ISSN 1991-8178; ESSN: 2309-8414

Ahmad, Sharifah Mumtazah Syed and Ling, Yim Loo and Adnan, Wan Azizun Wan and Anwar, Rina Md. (2016) Wavelet analysis of resultant velocity belonging to genuine and forged signatures. Journal of Forensic Sciences, 62 (2). 374 - 381. ISSN 0022-1198; ESSN: 1556-4029

Ahmad, So'bah and Anuar, Mohd Shamsul and Taip, Farah Saleena and Shamsudin, R. (2016) Effect of raw material variation, process variables and device stability on drying process of rambutan (Nephelium lappaceum L.) seed. International Food Research Journal, 23 (suppl.). S163-S171. ISSN 1985-4668; ESSN: 2231-7546

Ahmad Kurnin, Nor Azrin and Ismail, Mohd Halim Shah and Yoshida, Hiroyuki and Siajam, Shamsul Izhar (2016) Recovery of palm oil and valuable material from oil palm empty fruit bunch by sub-critical water. Journal of Oleo Science, 65 (4). pp. 283-289. ISSN 1345-8957; ESSN: 1347-3352

Ahmad Saffian, Harmaen and Abdan, Khalina and Hassan, Mohd Ali and Ibrahim, Nor Azowa (2016) Thermal, morphological, and biodegradability properties of bioplastic fertilizer composites made of oil palm biomass, fertilizer, and poly(hydroxybutyrate-co-valerate). International Journal of Polymer Science, 2016. art. no. 3230109. pp. 1-8. ISSN 1687-9422; ESSN: 1687-9430

Ahmad Saffian, Harmaen and Abdan, Khalina and Hassan, Mohd Ali and Ibrahim, Nor Azowa and Jawaid, Mohammad (2016) Characterisation and biodegradation of poly(latic acid) blended with oil palm biomass and fertiliser for bioplastic fertiliser composites. BioResources, 11 (1). pp. 2055-2070. ISSN 1930-2126

Ahmad Shapi'i, Ruzanna and Othman, Siti Hajar (2016) Effect of concentration of chitosan on the mechanical, morphological and optical properties of tapioca starch film. International Food Research Journal, 23 (suppl.). S187-S193. ISSN 1985-4668; ESSN: 2231-7546

Ahmed, Agha Mushtaque and Muhamad Awang, Rita and Omar, Dzolkhifli and Majid, Dayang Laila and Gnanasegaram, Manjeri (2016) Influence of male age on producing rival calls in brown planthopper Nilaparvata lugens Stál (Homoptera: Delphacidae). Journal of Entomology and Zoology Studies, 4 (3 (pt. C)). pp. 163-166. ISSN 2349-6800; ESSN: 2320-7078

Ahmed, Goma Bedawi and M. Shariff, Abdul Rashid and Balasundram, Siva Kumar and Abdullah, Ahmad Fikri (2016) Agriculture land suitability analysis evaluation based multi criteria and GIS approach. IOP Conference Series: Earth and Environmental Science, 37. pp. 1-9. ISSN 1755-1307; ESSN: 1755-1315

Ahmed, Iman and Aris, Ishak and Marhaban, Mohammad Hamiruce and Ishak, Asnor Juraiza (2016) Wireless energy monitoring in biped robot based on Xbee RF module. Australian Journal of Basic and Applied Sciences, 10 (spec.11). pp. 228-235. ISSN 1991-8178

Ahmed, Rebaz Jamal and Gomes, Chandima and Kadir, Zainal and Izadi, Mehdi (2016) Voltage distribution of a wind turbine transformer under direct lightning strike: effects of the grounding of cable shield. Advanced Science Letters, 22 (7). pp. 1800-1804. ISSN 1936-6612; ESSN: 1936-7317

Akinbile, Christopher O. and Ogunrinde, Temitope A. and Che Man, Hasfalina and Abdul Aziz, Hamidi (2016) Phytoremediation of domestic wastewaters in free water surface constructed wetlands using Azolla pinnata. International Journal of Phytoremediation, 18 (1). pp. 54-61. ISSN 1522-6514; ESSN: 1549-7879

Al-Adnani, Nisreen N. Ali and Mustapha, Faizal and Salit, Mohd Sapuan and Muhammad Rashid, Raizal Saifulnaz (2016) Structural health monitoring and damage identification for composite panels using smart sensor. Journal of Intelligent Material Systems and Structures, 27 (17). pp. 2313-2323. ISSN 1045-389X; ESSN: 1530-8138

Al-Alimi, Abdulmoghni Ali Wazea and Cholan, Noran Azizan and Yaacob, Mohd. Hanif and Mahdi, Mohd Adzir (2016) Enhanced multiwavelength generation in Brillouin fiber laser with pump noise suppression technique. Laser Physics, 26 (6). pp. 1-10. ISSN 1054-660X; ESSN: 1555-6611

Al-Falahi, Muath and Baharudin, B.T. Hang Tuah and Tang, Sai Hong and Matori, Khamirul Amin (2016) Surface defects in groove milling of Hastelloy-C276 under fluid coolant. Materials and Manufacturing Processes, 31 (13). pp. 1724-1732. ISSN 1042-6914; ESSN: 1532-2475

Al-Maqri, Mohammed A. and Othman, Mohamed and Mohd Ali, Borhanuddin and Mohd Hanapi, Zurina (2016) Adaptive multi-polling scheduler for QoS support of video transmission in IEEE 802.11e WLANs. Telecommunication Systems, 61 (4). pp. 773-791. ISSN 1018-4864; ESSN: 1572-9451

Al-Maweri, Nasr Addin Ahmed Salem and Ali, Roslizah and Wan Adnan, Wan Azizun and Ramli, Abd Rahman and Syed Ahmad Abdul Rahman, Sharifah Mumtazah (2016) State-of-the-art in techniques of text digital watermarking: challenges and limitations. Journal of Computer Science, 12 (2). pp. 62-80. ISSN 1549-3636; ESSN: 1552-6607

Al-Oqla, Faris M. and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Abdul Aziz, Nuraini (2016) A decision-making model for selecting the most appropriate natural fiber – polypropylene-based composites for automotive applications. Journal of Composite Materials, 50 (4). pp. 543-556. ISSN 0021-9983; ESSN: 1530-793X

Al-Oqla, Faris M. and Sapuan, S. M. and Ishak, M. R. and Nuraini, A. A. (2016) A decision-making model for selecting the most appropriate natural fiber - Polypropylene-based composites for automotive applications. Journal of Composite Materials, 50 (4). pp. 543-556. ISSN 0021-9983

Al-doski, Jwan and Mansor, Shattri and Mohd Shafri, Helmi Zulhaidi (2016) Thermal imaging for pests detecting-a review. International Journal of Agricultural, Forestry & Plantation, 2. pp. 10-30. ISSN 2462-1757

Al-omari, Motea and Ramli, Abd Rahman and Sali, A. and Azmir, Raja Syamsul (2016) A femtocell cross-tier interference mitigation technique in OFDMA-LTE system: a cuckoo search based approach. Indian Journal of Science and Technology, 9 (2). pp. 1-12. ISSN 0974-6846; ESSN: 0974-5645

Al-sharif, Abubakr A. A. and Pradhan, Biswajeet (2016) Spatio-temporal prediction of urban expansion using bivariate statistical models: assessment of the efficacy of evidential belief functions and frequency ratio models. Applied Spatial Analysis and Policy, 9 (2). pp. 213-231. ISSN 1874-463X; ESSN: 1874-4621

Alabi, A. A. and Mohd Tahir, Suraya and Zahari, Nur Ismarrubie and Mohamed Ariff, Azmah Hanim and Anuar, Mohd Shamsul (2016) Effect of notching face on fracture toughness of green metal powder compacts. Global Journal of Engineering and Technology Review, 1 (1). pp. 49-56. ISSN 0128-2905

Alezabi, Kamal Ali and Hashim, Fazirulhisyam and Hashim, Shaiful Jahari and Mohd Ali, Borhanuddin and Jamalipour, Abbas (2016) Authentication process enhancements in WiMAX networks. Security and Communication Networks, 9 (17). pp. 4703-4725. ISSN 1939-0114; ESSN: 1939-0122

Algburi, Saleh M. and Abdul Aziz, Faieza and Baharudin, B.T. Hang Tuah (2016) Review of green building index in Malaysia; existing work and challenges. International Journal of Applied Engineering Research, 11 (5). pp. 3160-3167. ISSN 0973-4562; ESSN: 0973-9769

Alghrairi, Mokhalad Khaleel and Sulaiman, Nasri and Mohd Sidek, Roslina and Mutashar, Saad (2016) Optimization of spiral circular coils for bio-implantable micro-system stimulator at 6.78 MHz ISM band. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7046-7054. ISSN 1819-6608

Alhamdawee, Ehsan Mohsin and Mailah, Nashiren Farzilah and Mohd Radzi, Mohd Amran and Shafie, Suhaidi and Hajighorbani , Shahrooz and Turki, Ahmed Qasim (2016) Comparison of developed FLC and P&O MPPT algorithms for improving PV system performance at variable irradiance conditions. World Journal of Engineering, 13 (6). 494 - 499. ISSN 1708-5284

Alhammadi, Abdulraqeb and Hashim, Fazirulhisyam and Fadlee, Mohd and Shami, Tareq M. (2016) An adaptive localization system using particle swarm optimization in a circular distribution form. Jurnal Teknologi, 78 (9-3). pp. 105-110. ISSN 0127–9696; ESSN: 2180–3722

Alhasoon, Asaad A. and Hizam, Hashim and Wan Hassan, Wan Zuha (2016) Constant DC-DC converter with variable voltage and load resistive in pico hydro turbine generator system. International Journal of Computer Technology and Applications, 9 (31). pp. 7-14. ISSN 2229-6093

Ali, Hydar Lafta and Mohammed, Thamer Ahmed and Yusuf, Badronnisa and Abdul Aziz, Azlan (2016) Testing the accuracy of sediment transport equations using field data. Malaysian Journal of Civil Engineering, 28 (spec.1). pp. 50-64. ISSN 1823-7843

Ali, M. A. and Yusof, Yus Aniza and Chin, Nyuk Ling and Ibrahim, M. N. (2016) Effect of different drying treatments on colour quality and ascorbic acid concentration of guava fruit. International Food Research Journal, 23 (suppl.). S155-S161. ISSN 1985-4668; ESSN: 2231-7546

Ali, M. I. F. and Abdullah, E. J. (2016) Design of automatic rotor blades folding system using NiTi shape memory alloy actuator. IOP Conference Series: Materials Science and Engineering, 152 (1). pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Ali, Mahmood and Salit, Mohd Sapuan and Karuppiah, Karmegam and Ahmed, Abu Saleh (2016) Evaluation the discomfort level for students Polytechnic Kuching Sarawak sitting on chairs. Malaysian Journal of Public Health Medicine, 16 (suppl.1). pp. 36-43. ISSN 1675-0306

Ali, May and Abdul-Rashid, Suraya and Hamidon, Mohd Nizar and Md Yasin, Faizah (2016) The growth kinetics of multilayer graphene grown on Al2O3 substrate by chemical vapour deposition. Procedia Engineering, 148. pp. 1295-1302. ISSN 1877-7058

Ali, Nasser Hasan and Mohd Ali, Borhanuddin and Basir, Otman and Othman, Mohammad Lutfi and Hashim, Fazirulhisyam and Abdel-Latif, K. M. (2016) Protection of smart substation based on WLAN complies with IEC61850 using traveling wave analysis. Electric Power Systems Research, 140. pp. 20-26. ISSN 0378-7796; ESSN: 1873-2046

Alkbir, M. F. M. and S., M. Sapuan and Nuraini, A. A. and Ishak, Mohamad Ridzwan (2016) Comparative investigation on the failure modes of natural kenaf/epoxy reinforced composite hexagonal tubes. Key Engineering Materials, 709. pp. 7-10. ISSN 1013-9826; ESSN: 1662-9795

Alkbir, Munir Faraj Almbrouk and Salit, Mohd Sapuan and Abdul Aziz, Nuraini and Ishak, Mohamad Ridzwan (2016) Fibre properties and crashworthiness parameters of natural fibre-reinforced composite structure: a literature review. Composite Structures, 148. pp. 59-73. ISSN 0263-8223; ESSN: 1879-1085

Alkbir, Munir Faraj Almbrouk and Salit, Mohd Sapuan and Abdul Aziz, Nuraini and Ishak, Mohamad Ridzwan (2016) Lateral crushing properties of non-woven kenaf (mat)-reinforced epoxy composite hexagonal tubes. International Journal of Precision Engineering and Manufacturing, 17 (7). pp. 965-972. ISSN 2234-7593; ESSN: 2005-4602

Almohammedi, Akram A. and Noordin, Nor Kamariah and Saeed, Sabri (2016) Evaluating the impact of transmission range on the performance of VANET. International Journal of Electrical and Computer Engineering, 6 (2). pp. 800-809. ISSN 2088-8708

Alomari, Nashwan K. and Yusuf, Badronnisa and Mohammed Ali, Thamer Ahmed and Ghazali, Abdul Halim (2016) Flow in a branching open channel: a review. Pertanika Journal of Scholarly Research Reviews, 2 (2). pp. 40-56. ISSN 2462-2028

Alomari, Nashwan K. and Yusuf, Badronnisa and Mohammed, Thamer Ahmed and Ghazali, Abdul Halim (2016) Velocity distribution description in a sand bed branching channel with different angles and bed widths. Journal of Scientific Research and Development, 3 (5). pp. 200-203. ISSN 1115-7569

Alonge, Akindele Folarin and Bassey, E. and Esua, Okon Johnson and Chikwendu, Onwude Daniel Iroemeha (2016) Development and preliminary testing of a bambara groundnut sheller. International Food Research Journal, 23 (suppl.). S7-S13. ISSN 1985-4668; ESSN: 2231-7546

Alrazen, Hayder Abdullah Luaibi and Abu Talib, Abd. Rahim and Adnan, R. and Ahmad, Kamarul Arifin (2016) A review of the effect of hydrogen addition on the performance and emissions of the compression – ignition engine. Renewable and Sustainable Energy Reviews, 54. pp. 785-796. ISSN 1364-0321; ESSN: 1879-0690

Alsahag, Ali Mohammed and Mohd. Ali, Borhanuddin and Noordin, Nor Kamariah and Mohamad, Hafizal (2016) Maximum rate resource allocation algorithms with multiuser diversity and QoS support for downlink OFDMA based WiMAX system. Telecommunication Systems, 63 (1). pp. 1-14. ISSN 1018-4864; ESSN: 1572-9451

Althuwaynee, Omar F. and Pradhan, Biswajeet and Lee, Saro (2016) A novel integrated model for assessing landslide susceptibility mapping using CHAID and AHP pair-wise comparison. International Journal of Remote Sensing, 37 (5). pp. 1190-1209. ISSN 0143-1161; ESSN: 1366-5901

Alwahib, Ali Abdulkhaleq and Sadrolhosseini, Amir Reza and Lim, Hong Ngee and Yaacob, Mohd Hanif and Abu Bakar, Muhammad Hafiz and Mahdi, Mohd Adzir (2016) Study of EDC/NHS immobilization for plumbous detection using surface plasmon resonance. Jurnal Teknologi (Sciences and Engineering), 78 (3). pp. 253-256. ISSN 0127-9696; ESSN: 2180-3722

Alwathaf, Ahmed H. and Ohu, Rachael B. and Jaafar, Mohd. S and Aznieta, Farah N. (2016) Analytical investigation of concrete beams reinforced with embedded CFRP plates. The Indian Concrete Journal, 90 (6). pp. 58-68. ISSN 0019-4565

Al‑Aqeeli, Yousif H. and Lee, Teang Shui and Abd Aziz, Samsuzana (2016) Enhanced genetic algorithm optimization model for a single reservoir operation based on hydropower generation: case study of Mosul reservoir, northern Iraq. SpringerPlus, 5 (1). pp. 1-21. ISSN 2193-1801

Amir, Muhammad Azrai and Toha, Siti Fauziah and Aris, Ishak and Md. Yusof, Hazlina (2016) Experimental analysis of human lumbar vertebrae during prolonged distance driving. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 433-438. ISSN 1819-6608

Amran, Y. H. Mugahed and Abang Ali, Abang Abdullah and Muhammad Rashid, Raizal Saifulnaz and Hejazi, Farzad and Safiee, Nor Azizi (2016) Structural behavior of axially loaded precast foamed concrete sandwich panels. Construction and Building Materials, 107. pp. 307-320. ISSN 0950-0618

Anggraini, Vivi (2016) Potential of coir fibres as soil reinforcement. Pertanika Journal of Scholarly Research Reviews, 2 (1). pp. 95-106. ISSN 2462-2028

Anggraini, Vivi and Asadi, Afshin and Farzadnia, Nima and Jahangirian, Hossein and Kim Huat, Bujang (2016) Effects of coir fibres modified with Ca(OH)2 and Mg(OH)2 nanopeprintss on mechanical properties of lime-treated marine clay. Geosynthetics International, 23 (3). pp. 206-218. ISSN 1072-6349; ESSN: 1751-7613

Anggraini, Vivi and Asadi, Afshin and Farzadnia, Nima and Jahangirian, Hossein and Kim Huat, Bujang (2016) Reinforcement benefits of nanomodified coir fiber in lime-treated marine clay. Journal of Materials in Civil Engineering, 28 (6). pp. 1-8. ISSN 0899-1561; ESSN: 1943-5533

Aqel, Mohammad O. A. and Marhaban, Mohammad Hamiruce and Saripan, M. Iqbal and Ismail, Napsiah (2016) Adaptive-search template matching technique based on vehicle acceleration for monocular visual odometry system. IEEJ Transactions on Electrical and Electronic Engineering, 11 (6). pp. 739-752. ISSN 1931-4973; ESSN: 1931-4981

Aramesh, Roya and Akbari, Vahid and Shamiri, Ahmad and Hussain, Mohamed Azlan and Aghamohammadi, Nasrin (2016) Hydrodynamics and particle mixing/segregation measurements in an industrial gas phase olefin polymerization reactor using image processing technique and CFD-PBM model. Measurement, 83. pp. 106-122. ISSN 0263-2241; ESSN: 1873-412X

Arezoumand, Reza and Mashohor, Syamsiah and Marhaban, Mohammad Hamiruce (2016) Efficient terrain coverage for deploying wireless sensor nodes on multi-robot system. Intelligent Service Robotics, 9 (2). pp. 163-175. ISSN 1861-2776; ESSN: 1861-2784

Arigbabu, Olasimbo Ayodeji and Mahmood, Saif and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Arigbabu, Abayomi A. (2016) Smile detection using hybrid face representation. Journal of Ambient Intelligence and Humanized Computing, 7 (3). pp. 415-426. ISSN 1868-5137; ESSN: 1868-5145

Arunkumar, T. and Velraj, R. and Denkenberger, David and Sathyamurthy, Ravishankar and Vinothkumar, K. and Porkumaran, K. and Ahsan, Amimul (2016) Effect of heat removal on tubular solar desalting system. Desalination, 379. pp. 24-33. ISSN 0011-9164; ESSN: 1873-4464

Asr, Mahdi Torabi and Nezhad, Erfan Zal and Mustapha, Faizal and Wiriadidjaja, Surjatin (2016) Study on start-up characteristics of H-Darrieus vertical axis wind turbines comprising NACA 4-digit series blade airfoils. Energy, 112. pp. 528-537. ISSN 0360-5442; ESSN: 1873-6785

Asr, Mahdi Torabi and Osloob, Reza and Mustapha, Faizal (2016) Double - stage H-Darrieus wind turbine - rotor aerodynamics. Applied Mechanics and Materials, 829. pp. 21-26. ISSN 1660-9336; ESSN: 1662-7482

Audu, Balami Ayuba and Musa, Dauda Solomon and Mohammed, I. S. and Agunsoye, J. K. and Abu, H. and Abubakar, I. and Ahmad, Desa (2016) Design and fabrication of a cocoyam (Colocasia esculenta) peeling machine. International Food Research Journal, 23 (suppl.). S65-S70. ISSN 1985-4668; ESSN: 2231-7546

Awaluddin, Saidatul Aliaa and Siajam, Shamsul Izhar and Yoshida, Hiroyuki and Danquah, Michael Kobina and Harun, Mohd Razif (2016) Sub-critical water technology for enhanced extraction of bioactive compounds from microalgae. Journal of Engineering Science and Technology, 11 (spec. July). pp. 63-72. ISSN 1823-4690

Awaluddin, Saidatul Aliaa and Thiruvenkadam, Selvakumar and Siajam, Shamsul Izhar and Yoshida, Hiroyuki and Danquah, Michael Kobina and Harun, Mohd Razif (2016) Subcritical water technology for enhanced extraction of biochemical compounds from Chlorella vulgaris. BioMed Research International, 2016. art. no. 5816974. pp. 1-10. ISSN 2314-6133; ESSN: 2314-6141

Azahari, Siti Roshana and Salahuddin, Bidita Binte and Mohd Noh, Nur Ajeerah and Md Fahmy, Rabiah Nizah and Abdul Rashid, Suraya (2016) Physico-chemical and emission characterization of emulsified biodiesel/diesel blends. Biofuels, 7 (4). pp. 337-343. ISSN 1759-7269; ESSN: 1759-7277

Azhdar, Amir Fateh and Hejazi, Farzad and Ramanathan, R. A. and Jaafar, Mohd Saleh (2016) Seismic response of a light rail transit station equipped with braced viscous damper. Pertanika Journal of Science & Technology, 24 (2). pp. 273-283. ISSN 0128-7680; ESSN: 2231-8526

Azis, N. and Jasni, J. and Ab Kadir, M. Z. A. and Yunus, R. and Ishak, M. T. and Yaakub, Z. (2016) The effect of polarity on the lightning breakdown voltages of palm oil and coconut oil under a non-uniform field for transformers application. Industrial Crops and Products, 89 (10). pp. 250-256. ISSN 0926-6690; ESSN: 1872-633X

Azram, Nur Adila and Atan, Rodziah (2016) Integration of scientific experimental data through ontology approach: a review. Journal of Theoretical and Applied Information Technology, 92 (1). pp. 64-71. ISSN 1992-8645; ESSN: 1817-3195

Bahmani, Sayed Hessam and Nima Farzadnia, and Asadi, Afshin and B. K. Huat, Bujang (2016) The effect of size and replacement content of nanosilica on strength development of cement treated residual soil. Construction and Building Materials, 118. pp. 294-306. ISSN 0950-0618

Bahrami, Rouhollah and Soltani, Samira and Rashidi Bod, Hossein and Jowkar, Somayeh and Sahamijoo, Amirzubir and Taghizadegan, Ali and Sulaiman, Nasri. B (2016) Design sensitive model reference controller with application to medical technology. International Journal of Hybrid Information Technology, 9 (7). pp. 249-268. ISSN 1738-9968

Bakhshipour, Zeinab and Asadi, Afshin and Kim Huat, Bujang and Sridharan, A. (2016) Long-term intruding effects of acid rain on engineering properties of primary and secondary kaolinite clays. International Journal of Geosynthetics and Ground Engineering, 2 (21). pp. 1-17. ISSN 2199-9260; ESSN: 2199-9279

Bakhshipour, Zeinab and Asadi , Afshin and Kim Huat, Bujang and Sridharan, A. and Kawasaki, Satoru (2016) Effect of acid rain on geotechnical properties of residual soils. Soils and Foundations, 56 (6). pp. 1008-1020. ISSN 0038-0806

Bala, Ashis Kumar and Bari, Quazi Hamidul and Ahsan, Amimul and ElSergany, Moetaz Mahmoud and Sathyamurthy, Ravishankar and Bek, Mohamed Ali and Rowshon, Md Kamal and Mallick, Jayanta and Nik Daud, Nik Norsyahariati (2016) Chemical characteristics of native soil in shrimp Gher and agricultural land. Engineering Journal, 20 (2). pp. 1-15. ISSN 0125-8281

Bashar, Zubairu Usman and Wayayok, Aimrun and Mohd Soom, Mohd Amin and Mahadi, Mohammad Razif and Bande, Y. M. (2016) SRI-tray: breakthrough in nursery management for the system of rice intensification. Jurnal Teknologi (Sciences & Engineering), 78 (1-2). pp. 65-71. ISSN 0127-9696; ESSN: 2180-3722

Basri, Adi Azriff and Zuber, Muhammad and Zakaria, Mohamad Shukri and Basri, Ernnie Illyani and Abdul Aziz, Ahmad Fazli and Mohd Ali, Rosli and Tamagawa, Masaaki and Ahmad, Kamarul Arifﬁn (2016) The hemodynamic effects of paravalvular leakage using fluid structure interaction; transcatheter aortic valve implantation patient. Journal of Medical Imaging and Health Informatics, 6 (6). pp. 1513-1518. ISSN 2156-7018; ESSN: 2156-7026

Basri, Ernnie Illyani and Basri, Adi Azriff and Riazuddin, Vizy Nazira and Shahwir, Siti Farhana and Zuber, Mohammad and Ahmad, Kamarul Arifin (2016) Computational fluid dynamics study in biomedical applications: a review. International Journal of Fluids and Heat Transfer, 1 (2). pp. 1-14. ISSN 0127-5690

Bejo, Siti Khairunniza and Azman, Norsolehah and Jamil, Norazlida (2016) Paddy grading using thermal imaging technology. International Food Research Journal, 23 (suppl.). S245-S248. ISSN 1985-4668; ESSN: 2231-7546

Bejo, Siti Khairunniza and Sumgap, Nor Hafizah and Mohd Johari, Siti Nurul Afiah (2016) Relationship between soil moisture content in paddy field and its image texture. Jurnal Teknologi , 78 (1-2). pp. 93-96. ISSN 0127-9696; ESSN: 2180-3722

Ben Youssef, Khaled Ali Ahmed and Abdullah, Ahmad Makmom and Mohd Shafri, Helmi Zulhaidi and Ashaari, Zulfa Hanan and Gumel, Danladi Yusuf and Yusof, Sara Yasina (2016) Estimation of aerosol dispersion & urban air quality evaluation over Malaysia using MODIS satellite. International Journal of Advanced Scientific and Technical Research, 3 (6). pp. 229-238. ISSN 2249 - 9954

Bimakr, Mandana and Abdul Rahman, Russly and Ganjloo, Ali and Taip, Farah Saleena and Mohd Adzahan, Noranizan and Sarker, Md Zaidul Islam (2016) Characterization of valuable compounds from winter melon (Benincasa hispida (Thunb.) Cogn.) seeds using supercritical carbon dioxide extraction combined with pressure swing technique. Food and Bioprocess Technology, 9 (3). pp. 396-406. ISSN 1935-5130; ESSN: 1935-5149

Birnin-Yauri, Abubakar Umar and Ibrahim, Nor Azowa and Zainuddin, Norhazlin and Abdan, Khalina and Then, Yoon Yee and Chieng, Buong Woei (2016) Enhancement of the mechanical properties and dimensional stability of oil palm empty fruit bunch-kenaf core and oil palm mesocarp-kenaf core hybrid fiber-reinforced poly(lactic acid) biocomposites by borax decahydrate modification of fibers. BioResources, 11 (2). pp. 4865-4884. ISSN 1930-2126

Boon, Yih Tien and Naim, Mohd Nazli and Zakaria, Rabitah and Abu Bakar, Noor Fitrah and Ahmad, Noraini (2016) Electrophoretic mobility of Tween 80-encapsulated agarwood oil in aqueous. International Food Research Journal, 23 (suppl.). S133-S140. ISSN 1985-4668; ESSN: 2231-7546

Bottcher, M. and Eshghi, S. and Varatharajoo, Renuganth (2016) Testing and validation of a Β; algorithm for cubesat satellites. IOP Conference Series: Materials Science and Engineering, 152. pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Buba, Sani Dahiru and Wan Ahmad, Wan Fatinhamamah and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Jasni, Jasronita and Osman, Miszaina (2016) Reduction of earth grid resistance by addition of earth rods to various grid configurations. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4533-4538. ISSN 1819-6608

Bui, Dieu Tien and Ho, Tien Chung and Pradhan, Biswajeet and Pham, Binh Thai and Nhu, Viet Ha and Revhaug, Inge (2016) GIS-based modeling of rainfall-induced landslides using data mining-based functional trees classifier with AdaBoost, Bagging, and MultiBoost ensemble frameworks. Environmental Earth Sciences, 75 (1101). pp. 1-22. ISSN 1866-6280; ESSN: 1866-6299

Bui, Dieu Tien and Tran, Anh Tuan and Klempe, Harald and Pradhan, Biswajeet and Revhaug, Inge (2016) Spatial prediction models for shallow landslide hazards: a comparative assessment of the efficacy of support vector machines, artificial neural networks, kernel logistic regression, and logistic model tree. Landslides, 13 (2). pp. 361-378. ISSN 1612-510X; ESSN: 1612-5118

C. V., Aravind and Misron, Norhisam and Sarimuthu, Charles and Ahmad, Siti Anom (2016) Review on the grand challenges for engineering: a framework for the future. International Journal of Control Theory and Application, 9 (5). pp. 2423-2428. ISSN 0974-5572

Cardona, Francisco and Hameed Sultan, Mohamed Thariq and Abu Talib, Abd. Rahim and Farah Ezzah and Derahman, Aishah (2016) Interpenetrating polymer network (IPN) with epoxidized and acrylated bioresins and their composites with glass and jute fibres. BioResources, 11 (1). pp. 2820-2838. ISSN 1930-2126

Cardona, Francisco and Hamid Sultan, Mohamed Thariq (2016) Characterization of environmentally sustainable resole phenolic resins synthesized with plant-based bio-resources. Bioresources, 11 (1). pp. 965-983. ISSN 1930-2126

Chan, Sook Wah and Mirhosseini, Hamed and Taip, Farah Saleena and Ling, Tau Chuan and Nehdi, Imededdine Arbi and Tan, Chin Ping (2016) Emulsion formulation optimization and characterization of spray-dried k-carrageenan micropeprintss for the encapsulation of CoQ10. Food Science and Biotechnology, 25 (suppl. 1). pp. 53-62. ISSN 1226-7708; ESSN: 2092-6456

Chang, J. J. and Syafiie, S. and Raja Ahmad, Raja Mohd Kamil and Lim, T. A. (2016) Inter-individual variability in propofol pharmacokinetic/pharmacodynamic (PK/PD) model – a sensitivity analysis. Scholars Journal of Applied Medical Science, 4 (11B). 3936 - 3942. ISSN 2347-954X; ESSN: 2320-6691

Chattha, Shakeel Hussain and Che Man, Hasfalina and Mirani, Benish Nawaz and Mahadi, Muhammad Razif and Lee, Teang Shui (2016) Food grain losses associated with indigenous storage methods and development of storage facilities for food security. International Food Research Journal, 23 (suppl.). S57-S63. ISSN 1985-4668; ESSN: 2231-7546

Chee, Keong Chai and Ratnam, Chantara Thevy and Chuah, Teong Guan and Mohamed Yusoff, Hamdan (2016) Tensile properties and thermal stability of gamma irradiated epoxidized natural rubber latex with the presence of sensitizer. Journal of Polymer Materials, 33 (1). pp. 223-232. ISSN 0973-8622; ESSN: 0976-3449

Cheong, M. K. and Md Ali, Syaril Azrad and Azrad, S. (2016) Development of collision avoidance system for useful UAV applications using image sensors with laser transmitter. IOP Conference Series: Materials Science and Engineering, 152 (1). pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Cheong, Sin Soon and Muniandy, Ratnasamy and Hassim, Salihudin and Aburkaba, Eltaher Elzarroug (2016) Rheology of waste paint blended binders. Australian Journal of Basic and Applied Sciences, 10 (8). pp. 16-20. ISSN 1991-8178; ESSN: 2309-8414

Chikwendu, Onwude Daniel Iroemeha and Hashim, Norhashila and Janius, Rimfiel and Mat Nawi, Nazmi and Abdan, Khalina (2016) Modeling the thin‐layer drying of fruits and vegetables: a review. Comprehensive Reviews in Food Science and Food Safety, 15 (3). pp. 599-618. ISSN 1541-4337

Chikwendu, Onwude Daniel Iroemeha and Hashim, Norhashila and Janius, Rimfiel and Mat Nawi, Nazmi and Abdan, Khalina (2016) Modelling the convective drying process of pumpkin (Cucurbita moschata) using an artificial neural network. International Food Research Journal, 23 (suppl.). S237-S243. ISSN 1985-4668; ESSN: 2231-7546

Ching, Yern Chee and Ali, Md. Ershad and Abdullah, Luqman Chuah and Choo, Kai Wen and Kuan, Yong Ching and Julai @ Julaihi, Sabariah and Chuah, Cheng Hock and Liou, Nai Shang (2016) Rheological properties of cellulose nanocrystal-embedded polymer composites: a review. Cellulose, 23 (2). pp. 1011-1030. ISSN 0969-0239; ESSN: 1572-882X

Danial, Rabiatuladawiyah and Abdullah, Luqman Chuah and Mobarekeh, Mohsen Nourouzi and Sobri, Shafreeza and Koh, Yvonne Wei Ling (2016) Magnetic field enhanced electrocoagulation using iron electrode in removing glyphosate from aqueous solution. Malaysian Journal of Chemistry, 18 (2). pp. 106-117. ISSN 1511-2292

Darajeh, Negisa and Idris, Azni and Masoumi, Hamid Reza Fard and Nourani, Abolfazl and Truong, Paul and Sairi, Nor Asrina (2016) Modeling BOD and COD removal from Palm Oil Mill Secondary Effluent in floating wetland by Chrysopogon zizanioides (L.) using response surface methodology. Journal of Environmental Management, 181. pp. 343-352. ISSN 0301-4797; ESSN: 1095-8630

Darajeh, Negisa and Masoumi, Hamid Reza Fard and Kalantari, Katayoon and Ahmad @ Ayob, Mansor and Shameli, Kamyar and Basri, Mahiran and Khandanlou, Roshanak (2016) Optimization of process parameters for rapid adsorption of Pb(II), Ni(II), and Cu(II) by magnetic/talc nanocomposite using wavelet neural network. Research on Chemical Intermediates, 42 (3). pp. 1977-1987. ISSN 0922-6168; ESSN: 1568-5675

Dauda, Solomon Musa and Balami, Ayuba Audu and Lawal, Aminu and Ahmad, Desa (2016) Some engineering properties of Palmyra palm tree (Borassus aethiopum) germinating shoot. Agricultural Engineering International: CIGR Journal, 18 (1). pp. 58-69. ISSN 1682-1130

Delgoshaei, Aidin and Al-Mudhafar, Ajwad and Mohd Ariffin, Mohd. Khairol Anuar (2016) Developing a new method for modifying over - allocated multi - mode resource constraint schedules in the presence of preemptive resources. Decision Science Letters, 5 (4). pp. 499-518. ISSN 1929-5812

Delgoshaei, Aidin and Ali, Ahad and Ariffin, Mohd Khairol Anuar and Gomes, Chandima (2016) A multi-period scheduling of dynamic cellular manufacturing systems in the presence of cost uncertainty. Computers & Industrial Engineering, 100. pp. 110-132. ISSN 0360-8352

Delgoshaei, Aidin and Gomes, Chandima (2016) A multi-layer perceptron for scheduling cellular manufacturing systems in the presence of unreliable machines and uncertain cost. Applied Soft Computing, 49. pp. 27-55. ISSN 1568-4946; ESSN: 1872-9681

Delgoshaei, Aidin and Mohd Ariffin, Mohd Khairol and Baharudin, Btht Hang Tuah and Leman, Zulkiflle (2016) A new method for decreasing cell-load variation in dynamic cellular manufacturing systems. International Journal of Industrial Engineering Computations, 7 (1). pp. 83-110. ISSN 1923-2926; ESSN: 1923-2934

Delgoshaei, Aidin and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2016) Pre-emptive resource-constrained multimode project scheduling using genetic algorithm: a dynamic forward approach. Journal of Industrial Engineering and Management, 9 (3). pp. 732-785. ISSN 2013-8423; ESSN: 2013-0953

Dezfooli, Seyedehsara Masoomi and Tan, Wen Siang and Tey, Beng Ti and Ooi, Chien Wei and Hussain, Siti Aslina (2016) Expression and purification of the matrix protein of Nipah virus in baculovirus insect cell system. Biotechnology Progress, 32 (1). pp. 171-177. ISSN 8756-7938; ESSN: 1520-6033

Dibs, Hayder and Idrees, Mohammed Oludare and Saeidi, Vahideh and Mansor, Shattri (2016) Automatic keypoints extraction from UAV image with refine and improved scale invariant features transform (RI-SIFT). International Journal of Geoinformatics, 12 (3). pp. 51-55. ISSN 1686-6576

Djojodihardjo, Harijono and Ramli, Alif Syamim Syazwan and Wiriadidjaja, Surjatin and Mohd Rafie, Azmin Shakrine (2016) Kinematic and aerodynamic modelling of bi- and quad-wing flapping wing micro-air-vehicle. Advances in Aerospace Science and Technology, 1 (3). pp. 83-101. ISSN 2473-6708

Ehsan, Abang Annuar and Mohd Arip, Mohd Ridzuan and Sohaimi, Mohd Quyyum and Ghazi, Ibrahim and Abdul Aziz, Faieza (2016) Optical encryption device for software protection. Journal of Computer Science & Computational Mathematics, 6 (3). pp. 49-52. ISSN 2231-8879

Elbreki, Abdelnaser Muftah A. and Moh'D Alghoul, Mohammad Ahmed and Al-Shamani, Ali Najah and Ammar, A. A. and Yegani, Bita and Aboghrara, Alsanossi M. and Ruslan, Mohd Hafidz and Sopian, Kamaruzzaman (2016) The role of climatic-design-operational parameters on combined PV/T collector performance: a critical review. Renewable and Sustainable Energy Reviews, 57. pp. 602-647. ISSN 1364-0321; ESSN: 1879-0690

Epsipha, Pauline and Zuber, Mohammad and Ahmad, Kamarul Arifin (2016) CFD investigation of transonic axial compressor rotor blade at various off-design conditions. Pertanika Journal of Science & Technology, 24 (2). pp. 451-463. ISSN 0128-7680; ESSN: 2231-8526

Estahbanati, Mahmood Reza Karimi and Ahsan, Amimul and Feilizadeh, Mehrzad and Jafarpur, Khosrow and Ashrafmansouri, Seyedeh-Saba and Feilizadeh, Mansoor (2016) Theoretical and experimental investigation on internal reflectors in a single-slope solar still. Applied Energy, 165. pp. 537-547. ISSN 0306-2619; ESSN: 1872-9118

Esua, Okon Johnson and Makinde, O. O. and Arueya, Gibson Lucky and Chin, Nyuk Ling (2016) Antioxidant potential, phytochemical and nutrient compositions of Nigerian hog plum (Spondias mombin) seed kernel as a new food source. International Food Research Journal, 23 (suppl.). S179-S185. ISSN 1985-4668; ESSN: 2231-7546

Ethaib, Saleem and Omar, Rozita and Mustapa Kamal, Siti Mazlina and Awang Biak, Dayang Radiah and Syafiie, Syams (2016) Microwave-assisted dilute acid pretreatment and enzymatic hydrolysis of sago palm bark. North Carolina State University * College of Natural Resources, 11 (3). pp. 5687-5702. ISSN 1930-2126

Etti, Christopher Joseph and Yusof, Yus Aniza and Chin, Nyuk Ling and Mohd Tahir, Suraya (2016) Effects of formulation on flowability of selected herbal powders using compendial methods and powder flow analyser. International Food Research Journal, 23 (suppl.). S225-S230. ISSN 1985-4668; ESSN: 2231-7546

Fairuz, Z. M. and Abdullah, M. Z. and Zuber, Mohammad and Mujeebu, Muhammad Abdul and Abdullah @ Harun, Muhammad Khalil and Yusoff, H. and Abdul Aziz, M. S. (2016) Effect of wing deformation on the aerodynamic performance of flapping wings: fluid-structure interaction approach. Journal of Aerospace Engineering, 29 (4). pp. 1-14. ISSN 0893-1321; ESSN: 1943-5525

Faisal, Ali Raed and Hashim, Fazirulhisyam and Noordin, Nor Kamariah and Ismail, Mahamod and Jamalipour, Abbas (2016) Efficient beamforming and spectral efficiency maximization in a joint transmission system using an adaptive particle swarm optimization algorithm. Applied Soft Computing, 49. pp. 759-769. ISSN 1568-4946; ESSN: 1872-9681

Fanos, Ali Mutar and Pradhan, Biswajeet (2016) Multi-scenario rockfall hazard assessment using LiDAR data and GIS. Geotechnical and Geological Engineering, 34 (5). pp. 1375-1393. ISSN 0960-3182; ESSN: 1573-1529

Fanos, Ali Mutar and Pradhan, Biswajeet and Abdul Aziz, Azlan and Jebur, Mustafa Neamah and Hyuck, Jin Park (2016) Assessment of multi-scenario rockfall hazard based on mechanical parameters using high-resolution airborne laser scanning data and GIS in a tropical area. Environmental Earth Sciences, 75 (1129). pp. 1-16. ISSN 1866-6280; ESSN: 1866-6299

Fariman, Hessam Jahani and Ahmad, Siti Anom and Marhaban, Mohammad Hamiruce and Ghasab, Mohammad Ali Jan and Chappell, Paul H. (2016) Hand movements classification for myoelectric control system using adaptive resonance theory. Australasian Physical & Engineering Sciences in Medicine, 39 (1). pp. 85-102. ISSN 0158-9938; ESSN: 1879-5447

Farzan, Payam and Izadi, Mahdi and Gomes, Chandima and Hesamian, Mohammad Hesam (2016) Malaysia solar energy experience: intelligent fault location algorithm for unbalanced radial distribution network including PV systems. Journal of Renewable and Sustainable Energy, 8 (4). pp. 1-16. ISSN 1941-7012

Fasihnikoutalab, Mohammad Hamed and Asadi, Afshin and Kim Huat, Bujang and Westgate, Paul and Ball, Richard J. and Pourakbar, Shahram (2016) Laboratory-scale model of carbon dioxide deposition for soil stabilisation. Journal of Rock Mechanics and Geotechnical Engineering, 8 (2). pp. 178-186. ISSN 1674-7755

Fateh, Amir and Hejazi, Farzad and Jaafar, Mohd Saleh and Abd Karim, Izian and Adnan, Azlan (2016) Design of a variable stiffness bracing system: mathematical modeling, fabrication, and dynamic analysis. Soil Dynamics and Earthquake Engineering, 80 (2015). pp. 87-101. ISSN 0267-7261; ESSN: 1879-341X

Fateh, Amir and Hejazi, Farzad and Jaafar, Mohd Saleh and Abd. Karim, Izian (2016) Numerical and experimental evaluation of a developed nonlinear curved spring element under compression force. Journal of Constructional Steel Research, 117. pp. 115-125. ISSN 0143-974X

Fazli, Pardis and Che Man, Hasfalina and Mohamed Zawawi, Mohamed Azwan and Md. Shah, Umi Kalsom and Abdul Rahman, Nor Aini and Idris, Azni (2016) Methane emission from paddy soil in relation to soil temperature in tropical region. Jurnal Teknologi, 78 (1-2). pp. 87-91. ISSN 0127–9696; ESSN: 2180–3722

Feilizadeh, Mehrzad and Karimi Estahbanati, Mahmood Reza and Ahsan, Amimul and Jafarpur, Khosrow and Mersaghian, Amin (2016) Effects of water and basin depths in single basin solar stills: an experimental and theoretical study. Energy Conversion and Management, 122. pp. 174-181. ISSN 0196-8904; ESSN: 1879-2227

Flayyih, Wameedh Nazar and Samsudin, Khairulmizam and Hashim, Shaiful Jahari and Ismail, Yehea I. and Rokhani, Fakhrul Zaman (2016) Adaptive multibit crosstalk-aware error control coding scheme for on-chip communication. IEEE Transactions on Circuits and Systems II: Express Briefs, 63 (2). pp. 166-170. ISSN 1549-7747; ESSN: 1558-3791

Gadam, M. A. and Abdulazeez Ahmed, Maryam and Ng, Chee Kyun and Noordin, Nor Kamariah and Sali, Aduwati and Hashim, Fazirulhisyam (2016) Review of adaptive cell selection techniques in LTE-advanced heterogeneous networks. Journal of Computer Networks and Communications, 2016. art. no. 7394136. pp. 1-12. ISSN 2090-7141; ESSN: 2090-715X

Gan, Shu Hui and Ong, Sze Pheng and Chin, Nyuk Ling and Law, Chung Lim (2016) Colour changes, nitrite content and rehydration capacity of edible bird's nest by advanced drying method. Drying Technology, 34 (11). pp. 1330-1342. ISSN 0737-3937; ESSN:1532-2300

Ghaemi, Ferial and Abdullah, Luqman Chuah and Tahir, Paridah (2016) Core/shell structure of Ni/NiO encapsulated in carbon nanosphere coated with few- and multi-layered graphene: synthesis, mechanism and application. Polymers, 8 (381). pp. 1-12. ISSN 2073-4360

Ghaemi, Ferial and Ahmadian, Ali and Yunus, Robiah and Ismail, Fudziah and Rahmanian, Saeed (2016) Effects of thickness and amount of carbon nanofiber coated carbon fiber on improving the mechanical properties of nanocomposites. Nanomaterials, 6 (1). art. no. 6. pp. 1-16. ISSN 2079-4991

Ghapanchizadeh, Hossein and Ahmad, Siti Anom and Ishak, Asnor Juraiza (2016) Effect of surface electromyography electrode position during wrist extension and flexion based on time and frequency domain analyses. International Journal of Control Theory and Applications, 9 (5). pp. 559-566. ISSN 0974-5572

Ghapanchizadeh, Hossein and Ahmad, Siti Aqlima and Ishak, Asnor Juraiza and Al-quraishi, Maged Saleh Saeed (2016) Review of surface electrode placement for recording electromyography signals. Biomedical Research, 2017. S1-S7. ISSN 0970-938X; ESSN: 0976-1683

Ghasemi, Maryam Khadem and Mohd Yusuff, Rosnah (2016) Advantages and disadvantages of healthcare waste treatment and disposal alternatives: Malaysian scenario. Polish Journal of Environmental Studies, 25 (1). pp. 17-25. ISSN 1230-1485

Ghasemi, Sepehr and Raja Ahmad, Raja Mohd Kamil and Marhaban, Mohammad Hamiruce (2016) Nonlinear THF-FXLMS algorithm for active noise control with loudspeaker nonlinearity. Asian Journal of Control, 18 (2). pp. 502-513. ISSN 1561-8625; ESSN: 1934-6093

Gheni, Ali Yahya and Jusoh, Yusmadi Yah and A. Jabar, Marzanah and Mohd Ali, Norhayati (2016) A performance measurement framework for Global Virtual Teams (GVTs) in global IT projects. Australian Journal of Basic and Applied Sciences, 10 (10). pp. 74-80. ISSN 1991-8178

Ghiasi, Hootan and Piltan, Farzin and Avazpour, Mohammad Reza and Mazloom, Mohammad Hadi and Sahamijoo, Amirzubir and Sulaiman, Nasri B. (2016) Design sensor-less PID filter controller for first order delays system. International Journal of Hybrid Information Technology, 9 (4). pp. 11-24. ISSN 1738-9968

Ghiasi, M. and Ibrahim, Mohd Nordin and Kadir Basha, Roseliza and A. Talib, Rosnita (2016) Energy usage and drying capacity of flat-bed and inclined-bed dryers for rough rice drying. International Food Research Journal, 23 (suppl.). S23-S29. ISSN 1985-4668; ESSN: 2231-7546

Ghiyamat, Azadeh and Mohd Shafri, Helmi Zulhaidi and Mohamed Shariff, Abdul Rashid (2016) Influence of tree species complexity on discrimination performance of vegetation indices. European Journal of Remote Sensing, 49. pp. 15-37. ISSN 2279-7254

Ghobadifar, Faranak and Wayayok, Aimrun and Jebur, Mustafa Neamah (2016) Development of an early warning system for brown planthopper (BPH) (Nilaparvata lugens) in rice farming using multispectral remote sensing. Precision Agriculture, 17 (4). pp. 377-391. ISSN 1385-2256; ESSN: 1573-1618

Ghobadifar, Faranak and Wayayok, Aimrun and Mansor, Shattri and Mohd Shafri, Helmi Zulhaidi (2016) Detection of BPH (brown planthopper) sheath blight in rice farming using multispectral remote sensing. Geomatics, Natural Hazards and Risk, 7 (1). pp. 237-247. ISSN 1947-5705; ESSN: 1947-5713

Gholizadeh, S. (2016) A review of non-destructive testing methods of composite materials. Procedia Structural Integrity, 1. pp. 50-57. ISSN 2452-3216

Ghorbani, Karim and Teang, Shui Lee and Wayayok, Aimrun and Nasab, Saeed Boroomand (2016) Interceptor drainage modelling to manage high groundwater table on the Abyek Plain, Iran. Irrigation and Drainage, 65 (3). pp. 341-359. ISSN 1531-0353; ESSN: 1531-0361

Ghorbani, Karim and Wayayok, Aimrun and Abdullah, Ahmad Fikri (2016) Simulation of flood risk area in Kelantan watershed, Malaysia using numerical model. Jurnal Teknologi, 78 (1-2). pp. 51-57. ISSN 0127–9696; ESSN: 2180–3722

Goh, Kar Yin and Ching, Yern Chee and Chuah, Cheng Hock and Abdullah, Luqman Chuah and Liou, Nai Shang (2016) Individualization of microfibrillated celluloses from oil palm empty fruit bunch: comparative studies between acid hydrolysis and ammonium persulfate oxidation. Cellulose, 23 (1). pp. 379-390. ISSN 0969-0239; ESSN: 1572-882X

Goh, Zai Peng and Mohd Radzi, Mohd Amran and Thien, Yee Von and Hizam, Hashim and Abdul Wahab, Noor Izzri (2016) Hybrid FFT-ADALINE algorithm with fast estimation of harmonics in power system. IET Signal Processing, 10 (8). pp. 855-864. ISSN 1751-9675; ESSN: 1751-9683

Habibi, Mostafa and Hashemi, Ramin and Sadeghi, Ehsan and Fazaeli, A. and Ghazanfari, A. and Lashini, Hadi (2016) Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures. Journal of Materials Engineering and Performance, 25 (2). pp. 382-389. ISSN 1059-9495; ESSN: 1544-1024

Hadi, Zaid and Sulaiman, Nasri and Abdul Halin, Izhal and Md Yunus, Nurul Amziah and Mohammed, Hadi K. (2016) Image processing techniques to cope color vision deficiency in detecting pork adulteration in meatballs visually. Research Journal of Applied Sciences, Engineering and Technology, 13 (5). pp. 365-374. ISSN 2040-7459; ESSN: 2040-7467

Hadizadeh, M. and Amri, S. and S. A., Roohi and Mohafez, H. (2016) Assessment of gait symmetry improvements in national athletes after anterior cruciate ligament reconstruction during rehabilitation. International Journal of Sports Medicine, 37 (12). pp. 997-1002. ISSN 0172-4622; ESSN: 1439-3964

Hadizadeh, Maryam and Amri, Saidon and Mohafez, Hamidreza and Syed Waseem Ahmad, Sharifah Roohi and Mokhtar, Abdul Halim (2016) Gait analysis of national athletes after anterior cruciate ligament reconstruction following three stages of rehabilitation program: symmetrical perspective. Gait & Posture, 48. pp. 152-158. ISSN 0966-6362; ESSN: 1879-2219

Hafid, Halimatun Saadiah and Abdul Rahman, Nor'aini and Md. Shah, Umi Kalsom and Samsu Baharuddin, Azhari and Zakaria, Rabitah (2016) Direct utilization of kitchen waste for bioethanol production by separate hydrolysis and fermentation (SHF) using locally isolated yeast. International Journal of Green Energy, 13 (3). pp. 248-259. ISSN 1543-5075; ESSN: 1543-5083

Haghshenas, Babak and Haghshenas, Minoo and Nami, Yousef and Khosroushahi, Ahmad Yari and Abdullah, Norhafizah and Barzegari, Abolfazl and Rosli, Rozita and Hejazi, Mohammad Saeed (2016) Probiotic assessment of Lactobacillus plantarum 15HN and Enterococcus mundtii 50H isolated from traditional dairies microbiota. Advanced Pharmaceutical Bulletin, 6 (1). pp. 37-47. ISSN 2228-5881; ESSN: 2251-7308

Haider, Nawras Haidar Mostafa Meir Al-Said and Zahari, Nur Ismarrubie and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq (2016) Effect of fabric biaxial prestress on the fatigue of woven E-glass/polyester composites. Materials & Design, 92. pp. 579-589. ISSN 0264-1275; ESSN: 1873-4197

Hairuddin, Abdul Aziz and Yusaf, Talal and Wandel, Andrew P. (2016) Single-zone zero-dimensional model study for diesel-fuelled homogeneous charge compression ignition (HCCI) engines using Cantera. International Journal of Automotive and Mechanical Engineering, 13 (2). pp. 3309-3328. ISSN 2229-8649; ESSN: 2180-1606

Hajighorbani, Shahrooz and Mohd Radzi, Mohd Amran and Ab Kadir, Mohd Zainal Abidin and Shafie, Suhaidi (2016) DC-DC converter for photovoltaic powered battery charger. World Journal of Engineering, 13 (6). pp. 516-523. ISSN 1708-5284; ESSN: 1708-5284

Hajighorbani, Shahrooz and Mohd Radzi, Mohd Amran and Ab Kadir, Mohd Zainal Abidin and Shafie, Suhaidi and Mohd Zainuri, Muhammad Ammirrul Atiqi (2016) Implementing a novel hybrid maximum power point tracking technique in DSP via Simulink/MATLAB under partially shaded conditions. Energies, 9 (2). art. no. 85. pp. 1-25. ISSN 1996-1073

Hamdan, A. and Mustapha, F. and Ahmad, K. A. and Mohd Rafie, A. S. and Ishak, M. R. and Ismail, A. E. (2016) The bonded macro fiber composite (MFC) and woven kenaf effect analyses on the micro energy harvester performance of kenaf plate using modal testing and Taguchi method. Journal of Vibroengineering, 18 (2). pp. 699-716. ISSN 1392-8716

Hamedianfar, Alireza and Mohd Shafri, Helmi Zulhaidi (2016) Integrated approach using data mining-based decision tree and object-based image analysis for high-resolution urban mapping of WorldView-2 satellite sensor data. Journal of Applied Remote Sensing, 10 (2). pp. 1-21. ISSN 1931-3195

Hameed, Maan and Khmag, Asem and Zaman, Fakhrul and Ramli, Abd. Rahman (2016) A new lossless method of Huffman coding for text data compression and decompression process with FPGA implementation. Journal of Engineering and Applied Sciences, 11 (3). pp. 402-407. ISSN 1816-949X; ESSN: 1818-7803

Hameed, Yasir Talib and Idris, Azni and Hussain, Siti Aslina and Abdullah, Norhafizah (2016) A tannin-based agent for coagulation and flocculation of municipal wastewater: chemical composition, performance assessment compared to Polyaluminum chloride, and application in a pilot plant. Journal of Environmental Management, 184. pp. 494-503. ISSN 0301-4797; ESSN: 1095-8630

Hamid, Hussain and Mohd Razelan, Intan Suhana and Law, Teik Hua and Mohd Sadullah, Ahmad Farhan (2016) Development of composite road environment safety index. Journal of Transportation Safety & Security, 8 (1). pp. 1-17. ISSN 1943-9962; ESSN: 1943-9970

Hamzah, Meor Othman and Kakar, Muhammad Rafiq and Hainin, Mohd Rosli (2016) An overview of moisture damage in asphalt mixtures. Jurnal Teknologi, 73 (4). pp. 605-618. ISSN 0127–9696; ESSN: 2180–3722

Hanipah, Suhaiza Hanim and Loo, Yu Xiang and Mohammed, Mohd Afandi P. and Baharuddin, Azhari Samsu (2016) Study of non-linear mechanical behavior of oil palm mesocarp fibers. Journal of Natural Fibers, 14 (2). pp. 153-165. ISSN 1544-0478; ESSN: 1544-046X

Hanoon, Ammar Nasiri and Jaafar, Mohd. Saleh and Hejazi, Farzad and Abd Aziz, Farah Nora Aznieta (2016) Strut effectiveness factor for reinforced concrete deep beamsunder dynamic loading condition. Case Studies in Structural Engineering, 6. pp. 84-102. ISSN Elsevier BV

Harith, Hazreen and Malekani, Javad and Schmutz, Beat and Schuetz, Michael and Yarlagadda, Prasad KDV (2016) A method for optimal fit of patient-specific fracture fixation plates. Journal of Materials-Design and Applications, 230 (1). pp. 283-290. ISSN 2041-3076

Harith, Hazreen Haizi and Schmutz, Beat and Malekani, Javad and Schuetz, Michael A. and Yarlagadda, Prasad K. (2016) Can we safely deform a plate to fit every bone? population-based fit assessment and finite element deformation of a distal tibial plate. Medical Engineering and Physics, 38 (3). pp. 280-285. ISSN 1350-4533; ESSN: 1873-4030

Harun, Mohd Yusof and Che Yunus, M. Azizi and Shah Ismail, Mohd Halim and Morad, Noor Azian (2016) A comparative investigation on the effect of thermal treatments on the mechanical properties of oil palm fruitlet components. Journal of the Taiwan Institute of Chemical Engineers, 60. pp. 582-587. ISSN 1876-1070; ESSN: 1876-1089

Harun, Mohd Yusof and Che Yunus, Mohd Azizi and Ismail, Mohd Halim Shah and Morad, Noor Azian (2016) A comparative investigation on the effect of thermal treatments on the mechanical properties of oil palm fruitlet components. Journal of the Taiwan Institute of Chemical Engineers, 60. pp. 582-587. ISSN 1876-1070; ESSN: 1876-1089

Hashim, Suhairul and Abdul Karim, Muhammad Khalis and Bakar, K. A. and Sabarudin, Akmal and Chin, A. W. and Saripan, M. Iqbal and Bradley, David A. (2016) Evaluation of organ doses and specific k effective dose of 64-slice CT thorax examination using an adult anthropomorphic phantom. Radiation Physics and Chemistry, 126. pp. 14-20. ISSN 0969-806X; ESSN: 1879-0895

Hejazi, Farzad and Shoaei, Mohammad Dalili and Tousi, Ali and Jaafar, Mohd Saleh (2016) Analytical model for viscous wall dampers. Computer-Aided Civil and Infrastructure Engineering, 31 (5). pp. 381-399. ISSN 1093-9687; ESSN: 1467-8667

Hejazi, Maryamsadat and Syed Mohamed, Syed Abdul Rahman Al-Haddad and Singh, Yashwant Prasad and Hashim, Shaiful Jahari and Abdul Aziz, Ahmad Fazli (2016) ECG biometric authentication based on non-fiducial approach using kernel methods. Digital Signal Processing, 52. pp. 72-86. ISSN 1051-2004; ESSN: 1095-4333

Hong, Haoyuan and Pradhan, Biswajeet and Jebur, Mustafa Neamah and Bui, Dieu Tien and Xu, Chong and Akgun, Aykut (2016) Spatial prediction of landslide hazard at the Luxi area (China) using support vector machines. Environmental Earth Sciences, 75 (40). pp. 1-14. ISSN 1866-6280; ESSN: 1866-6299

Hoon, Yap and Mohd Radzi, Mohd Amran and Hassan, Mohd Khair and Mailah, Nashiren Farzilah (2016) Enhanced Instantaneous Power Theory with average algorithm for indirect current controlled three-level inverter-based shunt active power filter under dynamic state conditions. Mathematical Problems in Engineering, 2016. art. no. 9682512. pp. 1-12. ISSN 1024-123X; ESSN: 1563-5147

Hoon, Yap and Mohd Radzi, Mohd Amran and Hassan, Mohd Khair and Mailah, Nashiren Farzilah and Abdul Wahab, Noor Izzri (2016) A simplified synchronous reference frame for indirect current controlled three-level inverter-based shunt active power filters. Journal of Power Electronics, 16 (5). pp. 1964-1980. ISSN 1598-2092

Hosseini, Soraya and Abdul Rashid, Suraya and Abbasi, Ali and Babadi, Farahnaz Eghbali and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw (2016) Effect of catalyst and substrate on growth characteristics of carbon nanofiber onto honeycomb monolith. Journal of the Taiwan Institute of Chemical Engineers, 59. pp. 440-449. ISSN 1876-1070; ESSN: 1876-1089

Hu, Yonghong and Jia, Gensuo and Pohl, Christine and Zhang, Xiaoxuan and Van Genderen, John (2016) Assessing surface albedo change and its induced radiation budget under rapid urbanization with Landsat and GLASS data. Theoretical and Applied Climatology, 123 (3-4). pp. 711-722. ISSN 0177-798X; ESSN: 1434-4483

Hussein, Yaseein Soubhi and Ali, Borhanuddin M. and A. Rasid, Mohd Fadlee and Sali, A. and Mansoor, Ali Mohammed (2016) A novel cell-selection optimization handover for long-term evolution (LTE) macrocellusing fuzzy TOPSIS. Computer Communications, 73. pp. 22-33. ISSN 0140-3664

Hussein-Al-Ali, Samer Hasan and Balavandy, Sepideh Keshan and Abidin, Zurina Zainal and Kura, Aminu Umar and Fakurazi, Sharida and Hussein, Mohd Zobir and Silwadi, Mohammed Fawaz (2016) The in vitro therapeutic activity of ellagic acid-alginate-silver nanopeprintss on breast cancer cells (MCF-7) and normal fibroblast cells (3T3). Science of Advanced Materials, 8 (3). pp. 545-553. ISSN 1947-2935

Ibraheem, Sameer Adnan and Sreenivasan, Subramania Sarma and Abdan, Khalina and A. Sulaiman, Shamsuddin and Ali, Aidy and Abang Abdul Majid, Dayang Laila (2016) The effects of combined chemical treatments on the mechanical properties of three grades of sisal. BioResources, 11 (4). pp. 8968-8980. ISSN 1930-2126

Ibrahim, M. G. and Shehu, A. A. and Musa, Dauda Solomon and Ahmad, Desa (2016) Design, fabrication and testing of shea nut shelling machine. International Food Research Journal, 23 (suppl.). S71-S79. ISSN 1985-4668; ESSN: 2231-7546

Ibrahim, N. U. A. and Abd Aziz, Samsuzana and Zude, M. and Hashim, N. (2016) Fluorescence spectroscopy for analysing deterioration of palm olein in batch deep-fat frying. International Food Research Journal, 23 (suppl.). S45-S50. ISSN 1985-4668; ESSN: 2231-7546

Idrees, Mohammed Oludare and Pradhan, Biswajeet (2016) A decade of modern cave surveying with terrestrial laser scanning: a review of sensors, method and application development. International Journal of Speleology, 45 (1). pp. 71-88. ISSN 0392-6672; ESSN: 1827-806X

Idrees, Mohammed Oludare and Pradhan, Biswajeet and Buchroithner, Manfred F. and Mohd Shafri, Helmi Zulhaidi and Bejo, Siti Khairunniza (2016) Assessing the transferability of a hybrid Taguchi-objective function method to optimize image segmentation for detecting and counting cave roosting birds using terrestrial laser scanning data. Journal of Applied Remote Sensing, 10 (3). art. no. 035023. pp. 1-16. ISSN 1931-3195

Idris, Azni and Ahsan, Amimul and Abdulsalam, Alrowaished and A. Mohamed, Thamer (2016) Characteristics and economic value of the rejected brine at Al-Khobar desalination plant in KSA. Journal of Desalination and Water Purification, 3. pp. 3-10. ISSN 0128-2387

Idris, Juferi and Shirai, Yoshihito and Andou, Yoshito and Mohd Ali, Ahmad Amiruddin and Othman, Mohd Ridzuan and Ibrahim, Izzudin and Yamamoto, Akio and Yasuda, Nobuhiko and Hassan, Mohd Ali (2016) Successful scaling-up of self-sustained pyrolysis of oil palm biomass under pool-type reactor. Waste Management & Research, 34 (2). pp. 176-180. ISSN 0734-242X; ESSN: 1096-3669

Iessa, Athraa and Abdul Wahab, Noor Izzri and Mariun, Norman and Hizam, Hashim (2016) Quantitative frequency security assessment for multi-machine power system based on COI frequency. Indian Journal of Science and Technology, 9 (28). pp. 1-8. ISSN 0974-6846; ESSN: 0974-5645

Imhan, Khalil Ibraheem and Baharudin, B. T. H. T. and Zakaria, Azmi and Ismail, Mohd Idris Shah and Hadi Alsabti, Nasser Mahdi and Ahmad, Ahmad Kamal (2016) The impact of tube diameter and thickness on laser tube bending process. Buletin Optik, 3. pp. 35-40. ISSN 2504-8546

Imteaz, Monzur A. and Paudel, Upendra and Matos, Cristina and Ahsan, Amimul (2016) Generalized equations for rainwater tank outcomes under different climate conditions: a case study for Adelaide. International Journal of Water, 10 (4). pp. 301-314. ISSN 1465-6620; ESSN:1741-5322

Imteaz, Monzur Alam and Ahmed, Md. Yeasin and Khan, Md. Shahnoor and Ahsan, Amimul (2016) A simple clogging and back-washing efficiency model for filtration of arsenic-contaminated water. Desalination and Water Treatment, 57 (26). pp. 12237-12243. ISSN 1944-3994; ESSN: 1944-3986

Imteaz, Monzur Alam and Uddameri, Venkatesh and Ahsan, Amimul (2016) Numerical model for the transport and degradation of pollutants through wetlands. International Journal of Water, 10 (1). pp. 1-12. ISSN 1465-6620; ESSN:1741-5322

Iroemeha, Onwude Daniel and Hashim, Norhashila and Janius, Rimfiel and Mat Nawi, Nazmi and Abdan, Khalina (2016) Evaluation of a suitable thin layer model for drying of pumpkin under forced air convection. International Food Research Journal, 23 (3). pp. 1173-1181. ISSN 1985-4668; ESSN: 2231-7546

Ishak, Asnor Juraiza and Abdul Rahman, Ribhan Zafira and Che Soh, Azura and Shamsuddin, Rosnah and Jalo, Salihu A. and Lim, F. C. and Lin, H. K. (2016) Quality identification of used cooking oil based on feature fusion of gas sensor and color. International Journal of Control Theory and Applications, 9 (5). pp. 321-329. ISSN 0974-5572

Ishak, Sairatul Dahlianis and Kamarudin, Mohd Salleh and Ramezani Fard, Ehsan and Saad, Che Roos and Yusof, Yus Aniza (2016) Effects of varying dietary carbohydrate levels on growth performance, body composition and liver histology of Malaysian mahseer fingerlings (Tor tambroides). Journal of Environmental Biology, 37 (spec.4). pp. 755-764. ISSN 0254-8704; ESSN: 2394-0379

Islam, Syed Zahurul and Mariun, Norman and Grozescu, Ionel Valeriu and Tsuyoshi, Hanamoto and Mitani, Yasunori and Othman, Mohammad Lutfi and Hizam, Hashim and Zainal Abidin, Mohd Izham (2016) Future strategic plan analysis for integrating distributed renewable generation to smart grid through wireless sensor network: Malaysia prospect. Renewable and Sustainable Energy Reviews, 53. pp. 978-992. ISSN 1364-0321; ESSN: 1879-0690

Ismail, Ahmad Kamal and Abdullah, Mohd Zulkifly and Zubair, Mohammed and Jamaludin, Abdul Rashid and Ahmad, Zainal Arifin (2016) Effect of ceramic coating in combustion and cogeneration performance of Al2O3 porous medium. Journal of the Energy Institute, 89 (1). pp. 81-93. ISSN 1743-9671; ESSN: 1746-0220

Ismail, M. I. S. and Afieq, W. M. (2016) Thermal analysis on a weld joint of aluminium alloy in gas metal arc welding. Advances in Production Engineering and Management, 11 (1). pp. 29-37. ISSN 1854‐6250

Ismail, Mohd Idris Shah and Okamoto, Yasuhiro and Okada, Akira (2016) Thermo-mechanical analysis on thermal deformation of thin stainless steel in laser micro-welding. International Journal of Manufacturing, Materials, and Mechanical Engineering, 6 (2). pp. 51-66. ISSN 2156-1680; ESSN: 2156-1672

Ismail, Muhammad Heikal and Law, Chung Lim and Hii, Ching Lik (2016) Transparency phenomena of flat-rice noodles (kuew teow) at drying at soaking variation. International Food Research Journal, 23 (suppl.). S195-S202. ISSN 1985-4668; ESSN: 2231-7546

Ismail, Nur Halilah and Chen, Soong Der and Ng, Liang Shing and Ramli, Abd Rahman (2016) An analysis of image quality assessment algorithm to detect the presence of unnatural contrast enhancement. Journal of Theoretical and Applied Information Technology, 83 (3). pp. 415-422. ISSN 1992-8645; ESSN: 1817-3195

Ismail, Z. and Varatharajoo, Renuganth (2016) Satellite cascade attitude control via fuzzy PD controller with active force control under momentum dumping. Materials Science and Engineering, 152. pp. 1-8. ISSN 1757-8981; ESSN: 1757-899X

Ismail Jassim, Lina and Yunus, Robiah and Rashid, Umer and Abdul Rashid, Suraya and Mohd Salleh, Mohamad Amran and Irawan, Sonny and Ghaemi, Ferial (2016) Synthesis and optimization of 2-ethylhexyl ester as base oil for drilling fluid formulation. Chemical Engineering Communications, 203 (4). pp. 463-470. ISSN 0098-6445; ESSN: 1563-5201

Jaafar, Che Nor Aiza and Zainol, Ismail and Mohamad Sapri, Mohd Amirul Zalif (2016) The effects of thermal ageing on properties and microstructure of Al-6063 alloy. Key Engineering Materials, 694. pp. 111-115. ISSN 1013-9826; ESSN: 1662-9795

Jaafar Jawad, Rana and Shah Ismail, Mohd Halim and Siajam, Shamsul Izhar (2016) Removal of heavy metals & colour from industrial wastewater by novel composite adsorbent of Alginate & Mangrove beads Coated by Chitosan. Journal of Purity, Utility Reaction & Environment, 5 (5). pp. 118-129. ISSN 2314-8101; ESSN: 2232-1179

Jaber, Hussein Sabah and Mansor, Shattri and Pradhan, Biswajeet and Ahmad, Noordin (2016) Evaluation of SEBAL moldel for Evapotranspiration mapping in Iraq using remote sensing and GlS. International Journal of Applied Engineering Research, 11 (6). pp. 3950-3955. ISSN 0973-4562; ESSN: 1087-1090

Jaber, Hussein Sabah and Mansor, Shattri and Pradhan, Biswajeet and Ahmad, Noordin (2016) Using remote sensing and GIS for assessment of irrigation performance in the Al-Hindiyah Barrage, Babil City, Iraq. Journal of Engineering and Applied Sciences, 11 (3). pp. 462-470. ISSN 1816-949X

Jahed, Arman and Piltan, Farzin and Namvarrechi, Saman and Nazari, Iman and Roshanzamir, Ali and Sulaiman, Nasri B. (2016) Design a methodology to model – reference control of first order delays system. International Journal of Hybrid Information Technology, 9 (3). pp. 105-116. ISSN 1738-9968

Jahedsaravani, A. and Massinaei, Mohammad and Marhaban, Mohammad Hamiruce (2016) Application of image processing and adaptive neuro-fuzzy system for estimation of the metallurgical parameters of a flotation process. Chemical Engineering Communications, 203 (10). pp. 1395-1402. ISSN 0098-6445; ESSN: 1563-5201

Jahedsaravani, Ali and Marhaban, Mohammad Hamiruce and Massinaei, Mohammad and Saripan, M. Iqbal and Mohd Noor, Samsul Bahari (2016) Froth-based modeling and control of a batch flotation process. International Journal of Mineral Processing, 146. pp. 90-96. ISSN 0301-7516

Jalaluddin, Mai Nursherida and Sahari, Barkawi and Abdul Aziz, Nuraini and Arumugam, Manohar (2016) Development and validation of newborn child head numerical model dummy for impact simulations. International Journal of Electronics and Electrical Engineering, 4 (6). pp. 563-568. ISSN 2301-380X

Jasim, Mohammed A. and Mohd Shafri, Helmi Zulhaidi and Hamedianfar, Alireza and Sameen, Maher Ibrahim (2016) Land transformation assessment using the integration of remote sensing and GIS techniques: a case study of Al-Anbar Province, Iraq. Arabian Journal of Geosciences, 9 (667). pp. 1-16. ISSN 1866-7511; ESSN: 1866-7538

Jawad, R. J. and Shah Ismail, M. H. and Siajam, S. I. (2016) Adsorption of iron ions from palm oil mill effluent using novel adsorbent of alginate–mangrove composite beads coated by chitosan. Iranica Journal of Energy & Environment, 7 (4). pp. 393-400. ISSN 2079-2115; ESSN: 2079-2123

Jawad, Rana Jaafar and Ismail, Mohd Halim Shah and Siajam, Shamsul Izhar (2016) Removal of residual oil from palm oil mill effluent by novel adsorbent of alginate & mangrove composite beads coated by chitosan. World Applied Sciences Journal, 34 (9). pp. 1159-1166. ISSN 1818-4952; ESSN: 1991-6426

Jebur, Mustafa Neamah and Pradhan, Biswajeet and Tehrany, Mahyat Shafapour (2016) Using ALOS PALSAR derived high - resolution DInSAR to detect slow - moving landslides in tropical forest: Cameron Highlands, Malaysia. Geomatics, Natural Hazards and Risk, 6 (8). pp. 741-759. ISSN 1947-5705; ESSN: 1947-5713

Jumaidin, R. and Sapuan, S. M. and Jawaid, M. and Ishak, M. R. and Sahari, J. (2016) Characteristics of thermoplastic sugar palm starch/agar blend: thermal, tensile, and physical properties. International Journal of Biological Macromolecules, 89. pp. 575-581. ISSN 0141-8130; ESSN: 1879-0003

Kadhem, Athraa Ali and Abdul Wahab, Noor Izzri and Aris, Ishak and Jasni, Jasronita and Abdalla, Ahmed N. (2016) Effect of wind energy unit availability on power system adequacy. Indian Journal of Science and Technology, 9 (28). pp. 1-7. ISSN 0974-6846; ESSN: 0974-5645

Kaigama, Muawiya Abubakar and Abdul Wahab, Noor Izzri and Othman, Mohammad Lutfi and Mohammed, Saidu K. (2016) Electrical grid stability enhancement using smart home Frequency-response Grid -Friendly Appliance System. Journal of Electrical Systems, 12 (1). pp. 216-229. ISSN 1112-5209

Kalantar, Bahareh and Mohd Shafri, Helmi Zulhaidi (2016) Synergistic use of genetic algorithm and spectral angle mapper for hyperspectral band selection of roof materials. Walailak Journal of Science and Technology, 13 (8). pp. 641-651. ISSN 1686-3933; ESSN: 2228-835X

Kamaruddin, Nur Hasiba and A. Bakar, Ahmad Ashrif and Yaacob, Mohd Hanif and Mahdi, Mohd Adzir and Zan, Mohd Saiful Dzulkefly and Shaari, Sahbudin (2016) Enhancement of chitosan-graphene oxide SPR sensor with a multi-metallic layers of Au–Ag–Au nanostructure for lead(II) ion detection. Applied Surface Science, 361. pp. 177-184. ISSN 0169-4332; ESSN: 1873-5584

Kamarudin, Mohd. Salleh and Ishak, Sairatul Dahlianis and Ramezani Fard, Ehsan and Saad, Che Roos and Yusof, Yus Aniza (2016) Effects of different temperature profiles and corn-sago starch ratios on physical properties of extruded tilapia diets. Iranian Journal of Fisheries Sciences, 15 (2). pp. 715-726. ISSN 1562-2916

Kamarul Zaman, A. A. and Shamsudin, Rosnah and Mohd Adzahan, Noranizan (2016) Effect of blending ratio on quality of fresh pineapple (Ananas comosus L.) and mango (Mangifera indica L.) juice blends. International Food Research Journal, 23 (suppl.). S101-S106. ISSN 1985-4668; ESSN: 2231-7546

Karpouzoglou, Timothy and Zulkafli, Zed Diyana and Grainger, Sam and Dewulf, Art and Buytaert, Wouter and Hannah, David M. (2016) Environmental Virtual Observatories (EVOs): prospects for knowledge co-creation and resilience in the Information Age. Current Opinion in Environmental Sustainability, 18. pp. 40-48. ISSN 1877-3435; ESSN: 1877-3443

Kazemian, Mohsen and Varahram, Pooria and Hashim, Shaiful Jahari and Mohd Ali, Borhanuddin and Farrell, Ronan (2016) A low complexity peak-to-average power ratio reduction scheme using gray codes. Wireless Personal Communications, 88 (2). pp. 223-239. ISSN 0929-6212; ESSN: 1572-834X

Ketabchi, Mohammad Reza and Khalid, Mohammad and Ratnam, Chantara Thevy and Walvekar, Rashmi and Abdullah, Luqman Chuah (2016) Sonosynthesis of microcellulose from kenaf fiber: optimization of process parameters. Journal of Natural Fibers, 14 (3). pp. 437-449. ISSN 1544-0478; ESSN: 1544-046X

Khairuddin, Nuruljannah and Abd Manaf, Latifah and Hassan, Mohd Ali and Halimoon, Normala and Wan Ab Karim Ghani, Wan Azlina (2016) High solid anaerobic co-digestion of household organic waste with cow manure for mass and energy recovery. Polish Journal of Environmental Studies, 25 (4). pp. 1549-1554. ISSN 1230-1485

Khalid, N. I. and Nordin, N. and Chia, Z. Y. and Ab Aziz, N. and Nuraini, A. A. and Taip, F. S. and Ahmedov, A. (2016) A removal kinetics approach for evaluation of economic cleaning protocols for pink guava puree fouling deposit. Journal of Cleaner Production, 135. pp. 1317-1326. ISSN 0959-6526

Khanaki, Razieh and Mohd Radzi, Mohd Amran and Marhaban, Mohammad Hamiruce (2016) Artificial neural network based maximum power point tracking controller for photovoltaic standalone system. International Journal of Green Energy, 13 (3). pp. 283-291. ISSN 1543-5075; ESSN: 1543-5083

Khandanlou, Roshanak and Fard Masoumi, Hamid Reza and Ahmad @ Ayob, Mansor and Shameli, Kamyar and Basri, Mahiran and Kalantari, Katayoon (2016) Enhancement of heavy metals sorption via nanocomposites of rice straw and Fe3O4 nanopeprintss using artificial neural network (ANN). Ecological Engineering, 91. pp. 249-256. ISSN 0925-8574; ESSN: 1872-6992

Khoshsirat, Nima and Md Yunus, Nurul Amziah (2016) Numerical analysis of In2S3 layer thickness, band gap and doping density for effective performance of a CIGS solar cell using SCAPS. Journal of Electronic Materials, 45 (11). pp. 5721-5727. ISSN 0361-5235; ESSN: 1543-186X

Khosravi, Faranak and Mahdiraji, Ghafour Amouzad and Mokhtar, Makhfudzah and Mahdi, Mohd Adzir and Malekmohammadi, Amin (2016) Improvement of three-level code division multiplexing via dispersion mapping. Telecommunication Systems, 61 (4). pp. 887-895. ISSN 1018-4864; ESSN: 1572-9451

Kiani, Golnar and Ibrahim, Rahinah and Abdan, Khalina (2016) Pre preparation of kenaf/carbon PPL composite to be employed in selective laser sintering machine. ALAM CIPTA, International Journal on Sustainable Tropical Design Research & Practice, 9 (2). pp. 2-6. ISSN 1823-7231; ESSN: 2289-3687

Lakshminarayana, G. and Kaky, Kawa M. and Jedryka, J. and El-Naggar, A. M. and Albassam, A. A. and Myronchuk, G. and Mahdi, Mohd Adzir (2016) Laser induced elastooptics in novel Bi2O3, and Pr2O3 doped tellurite rich glasses. Materials Letters, 183. pp. 322-324. ISSN 0167-577X; ESSN: 1873-4979

Lam, Su Shiung and Wan Mahari, Wan Adibah and Cheng, Chin Kui and Omar, Rozita and Chong, Cheng Tung and Chase, Howard A. (2016) Recovery of diesel-like fuel from waste palm oil by pyrolysis using a microwave heated bed of activated carbon. Energy, 115 (pt. 1). pp. 791-799. ISSN 0360-5442; ESSN: 1873-6785

Lateran, S. and Sedan, M. F. and Mohd Harithuddin, Ahmad Salahuddin and Md Ali, Syaril Azrad (2016) Development of unmanned aerial vehicle (UAV) based high altitude balloon (HAB) platform for active aerosol sampling. IOP Conference Series: Materials Science and Engineering, 152 (1). pp. 1-14. ISSN 1757-899X

Latif, A. A. and Mohamad, H. and Abu Bakar, Muhammad Hafiz and Muhammad, Farah Diana and Mahdi, Mohd Adzir (2016) Carbon nanotube-based mode-locked wavelength-switchable fiber laser via net gain cross section alteration. Laser Physics, 26 (2). art. no. 025106. ISSN 1054-660X; ESSN: 1555-6611

Lau, K. Y. and Abd Latif, Amirah and Abu Bakar, Muhammad Hafiz and Mahdi, Mohd Adzir (2016) High signal-to-noise ratio Q-switching erbium doped fiber laser pulse emission utilizing single layer trivial transfer graphene film saturable absorber. Jurnal Teknologi (Sciences & Engineering), 78 (3). pp. 129-133. ISSN 0127-9696; ESSN: 2180-3722

Law, Teik Hua and Ghanbari, Mahshid and Hamid, Hussain and Abdul Halin, Alfian and Ng, Choy Peng (2016) Role of sensory and cognitive conspicuity in the prevention of collisions between motorcycles and trucks at T-intersections. Accident Analysis & Prevention, 96. pp. 64-70. ISSN 0001-4575; ESSN: 1879-2057

Lazim, Yusriah and Salit, Mohd Sapuan and Zainudin, Edi Syams and Jaafar @ Mustapha, Mariatti and Jawaid, Mohammad (2016) Thermo-physical, thermal degradation, and flexural properties of betel nut husk fiber-reinforced vinyl ester composites. Polymer Composites, 37 (7). pp. 2008-2017. ISSN 0272-8397; ESSN: 1548-0569

Lee, Ching Hao and Salit, Mohd Sapuan and Lee, J. H. and Hassan, Mohd Roshdi (2016) Melt volume flow rate and melt flow rate of kenaf fibre reinforced Floreon/magnesium hydroxide biocomposites. SpringerPlus, 5. art. no. 1680. pp. 1-6. ISSN 2193-1801

Li, Shing Teoh and Ola, Lasekan and Mohd Adzahan, Noranizan and Hashim, Norhashila (2016) The effect of ultraviolet treatment on enzymatic activity and total phenolic content of minimally processed potato slices. Journal of Food Science & Technology, 53 (7). pp. 3035-3042. ISSN 0022-1155; ESSN: 0975-8402

Liew, S. Q. and N., L. Chin and Yusof, Y. A. and Sowndhararajan, K. (2016) Comparison of acidic and enzymatic pectin extraction from passion fruit peels and its gel properties. Journal of Food Process Engineering, 39 (5). pp. 501-511. ISSN 0145-8876; ESSN: 1745-4530

Lim, Bo Yuan and Shamsudin, Rosnah and Baharudin, B. T. Hang Tuah and Yunus, Robiah (2016) Performance evaluation and CFD multiphase modeling for multistage jatropha fruit shelling machine. Industrial Crops and Products, 85. pp. 125-138. ISSN 0926-6690; ESSN: 1872-633X

Lim, Chee Siang and Baharuddin, Mohd Rafee and Abd Rahman, Anita and Shah, Shamsul Azhar and Mohd Noor, Samsul Bahari (2016) A Malay version of perceived stress screening scale (PSS-10): psychometric evaluation among manufacturing industry workers. Malaysian Journal of Public Health Medicine, 16 (3). pp. 99-105. ISSN 1675-0306

Lim, Jackson Hwa Keen and Taip, Farah Saleena and Ibrahim, Mohd. Nordin and Abdul Aziz, Norashikin and Shishir, Mohammad Rezaul Islam (2016) Effect of pre-treatment on the physical properties of pumpkin powder. Australian Journal of Basic and Applied Sciences, 10 (spec.7). pp. 146-151. ISSN 1991-8178

Lim, W. J. and Chin, Nyuk Ling and Yusof, A. Y. and Yahya, A. and Tee, Tuan Poy (2016) Food waste handling in Malaysia and comparison with other Asian countries. International Food Research Journal, 23 (suppl.). S1-S6. ISSN 1985-4668; ESSN: 2231-7546

Loo, Yu Xiang and P. Mohammed, Mohd Afandi and Samsu Baharuddin, Azhari (2016) Characterisation of microcrystalline cellulose from oil palm fibres for food applications. Carbohydrate Polymers, 148. pp. 11-20. ISSN 0144-8617; ESSN: 1879-1344

Lotfivand, Nasser and Abdolzadeh, Vida and Hamidon, Mohd Nizar (2016) Artificial olfactory system with fault-tolerant sensor array. ISA Transactions, 63. pp. 425-435. ISSN 0019-0578; ESSN: 1879-2022

Lutpi, Husniyah Aliyah and Anuar, Hazleen and Mohamed, Mohd Ambri and Salit, Mohd Sapuan (2016) Potential of irradiated high density polyethylene/ethylene propylene rubber-carbon nanotube nanocomposite as shoe sole. Proceedings of the Institution of Mechanical Engineers. Part P: Journal of Sports Engineering and Technology, 230 (2). pp. 100-110. ISSN 1754-3371; ESSN: 1754-338X

M. Ahmed, Husam and Mohd Yusuff, Rosnah (2016) Factors affecting quality during the construction phase in Iraqi government companies. International Journal of Applied Engineering Research, 11 (13). pp. 7974-7981. ISSN 0973-4562; ESSN: 1087-1090

M. Alkbir, M. F. and Salit, Mohd Sapuan and A. A., Nuraini and Ishak, M. R. (2016) The effect of fiber content on the crashworthiness parameters of natural kenaf fiber-reinforced hexagonal composite tubes. Journal of Engineered Fibers and Fabrics, 11 (1). pp. 75-86. ISSN 1558-9250

M. I., Aida Isma and Idris, Azni and Omar, Rozita and Hassan, Mohd Ali and Zakaria, Mohamad Pauzi (2016) Characterization of bio fouling in membrane bioreactor. International Journal of Advances in Science, Engineering and Technology, 2. pp. 197-201. ISSN 2321–8991; ESSN: 2321-9009

M. L., Sanyang and S. M. , Sapuan and M., Jawaid and Ishak , M. R. and J. , Sahari (2016) Development and characterization of sugar palm starch and poly(lactic acid) bilayer films. Carbohydrate Polymers, 146. pp. 36-45. ISSN 0144-8617; ESSN: 1879-1344

Madzaki, Hazimah and Karim Ghani, Wan A. B. and Rebitanim, Nur Zalikha and Alias, Azil Bahari (2016) Carbon dioxide adsorption on sawdust biochar. Procedia Engineering, 148. pp. 718-725. ISSN 1877-7058

Maghami, Mohammad Reza and Hizam, Hashim and Gomes, Chandima and Mohd Radzi, Mohd Amran and Rezadad, Mohammad Ismael and Hajighorbani, Shahrooz (2016) Power loss due to soiling on solar panel: a review. Renewable and Sustainable Energy Reviews, 59. pp. 1307-1316. ISSN 1364-0321; ESSN: 1879-0690

Mahjoub, Babak and Ahmad, Kamarul Arifin and Wiriadidjaja, Surjatin (2016) Flow modification around a circular cylinder applying splitter plates. Pertanika Journal of Science & Technology, 24 (2). pp. 231-244. ISSN 0128-7680; ESSN: 2231-8526

Majzoobi, Gholam-Hussain and Nemati, Jamshid and Pipelzadeh, Mohammad Kazem and Sulaiman, Shamsuddin (2016) Characterization of mechanical properties of Al-6063 deformed by ECAE. International Journal of Advanced Manufacturing Technology, 84 (1-4). pp. 663-672. ISSN 0268-3768; ESSN: 1433-3015

Manz, Bastian and Buytaert, Wouter and Zulkafli, Zed Diyana and Lavado, Waldo and Willems, Bram and Robles, Luis Alberto and Rodriguez-Sanchez, Juan-Pablo (2016) High-resolution satellite-gauge merged precipitation climatologies of the Tropical Andes. Journal of Geophysical Research: Atmospheres, 121 (3). pp. 1190-1207. ISSN 2169-897X; ESSN: 2169-8996

Mat Jusoh, Suriani and Ali, Aidy and Abdan, Khalina and Salit, Mohd Sapuan and Haftirman (2016) Fatigue life estimation of kenaf reinforced composite materials by non-destructive techniques. Universal Journal of Materials Science, 4 (4). pp. 88-96. ISSN 2331-6691; ESSN: 2331-6705

Mat Lazim, Siti Saripa Rabiah and Mat Nawi, Nazmi and Chen, Guangnan and Jensen, Troy and Md Rasli, Ahmad Muslim (2016) Influence of different pre-processing methods in predicting sugarcane quality from near-infrared (NIR) spectral data. International Food Research Journal, 23 (suppl.). S231-S236. ISSN 1985-4668; ESSN: 2231-7546

Mazloom, Mohammad Hadi and Piltan, Farzin and Sahamijoo, Amirzubir and Avazpour, Mohammad Reza and Ghiasi, Hootan and Sulaiman, Nasri (2016) Robust auto-intelligent sliding accuracy for high sensitive surgical joints. International Journal of Bio-Science and Bio-Technology, 8 (1). pp. 213-238. ISSN 2233-7849

Md Rezali, Khairil Anas and As'arry, Azizan and Zulkefli, Zamir Aimaduddin and Samin, Razali and Abdul Jalil, Nawal Aswan (2016) Predicting the transmissibility of a glove material to the palm using a simple lumped parameter model of the hand and the glove. Jurnal Teknologi , 78 (6-10). pp. 17-22. ISSN 0127-9696; ESSN: 2180-3722

Md Rezali, Khairil Anas and Griffin, Michael J. (2016) Transmission of vibration through gloves: effects of material thickness. Ergonomics, 59 (8). pp. 1026-1037. ISSN 0014-0139

Md Rosli, Mohd Anwarul Arif and M. Thirunavakkarasu, Punithavathi and Muhammad Noor, Ahmad Shukri and Lim, Hong Ngee and Huang, Nay Ming (2016) Reduced graphene oxide nano-composites layer on fiber optic tip sensor reflectance response for sensing of aqueous ethanol. Journal of the European Optical Society-Rapid Publications, 12. art. no. 22. pp. 1-6. ISSN 1990-2573

Md Yunus, Nurul Amziah and Zainal Abidin, Zurina and Abdul Halin, Izhal (2016) Characterization of microelectrode array of dielectrophoretic microfluidic device. Journal of Bioengineering & Biomedical Science, 6 (3). pp. 1-8. ISSN 2155-9538

Md Yusoff, Zainuddin and Azmi, Nur Anati and Nahazanan, Haslinda and Nik Daud, Nik Norsyahariati and Abdul Aziz, Azlan (2016) Engineering geological of an active slope in KM46 Simpang Pulai, Perak. Malaysian Journal of Civil Engineering, 28 (spec.1). pp. 35-41. ISSN 1823-7843

Md Yusoff, Zainuddin and Raju, Gobindaran and Nahazanan, Haslinda (2016) Static and dynamic behaviour of Kuala Lumpur limestone. Malaysian Journal of Civil Engineering, 28 (spec.1). pp. 18-25. ISSN 1823-7843

Megat Mohd Noor, Megat Johari and Mohammad, Thamer Ahmed and Ghazali, Abdul Halim (2016) Assessment of using hollow fiber microfiltration in treating lake water. Desalination and Water Treatment, 57 (48-49). pp. 23232-23245. ISSN 1944-3986; ESSN: 1944-3994

Megat Mohd Noor, Megat Johari and Mohammad Ali, Thamer Ahmad and Ghazali, Abdul Halim (2016) Assessment of using hollow fibre microfiltration in treating lake water. Desalination and Water Treatment, 57 (48-49). pp. 23232-23245. ISSN 1944-3994; ESSN: 1944-3986

Mhd Abd Kader, K. A. and Ab. Aziz, Norashikin and Aziz, A. and Talib, A. T. and Ahmad, N. H. and Tan, C. P. and Kamarudin, S. (2016) Evaluation on physico-chemical properties of pink guava puree residue as bioresource. International Food Research Journal, 23 (suppl.). S125-S131. ISSN 1985-4668; ESSN: 2231-7546

Mhd Haniffa, Mhd Abd Cader and Ching, Yern Chee and Abdullah, Luqman Chuah and Poh, Sin Chew and Chuah, Cheng Hock (2016) Review of bionanocomposite coating films and their applications. Polymers, 8 (7). art. no. 246. pp. 1-33. ISSN 2073-4360

Misri, Sairizal and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Leman, Zulkiflle (2016) Split-disk properties of kenaf yarn fibre-reinforced unsaturated polyester composites using filament winding method. Pertanika Journal of Science & Technology, 24 (2). pp. 475-482. ISSN 0128-7680; ESSN: 2231-8526

Misron, Norhisam and Vaithilingam, Chockalingam Aravind and Mailah, Nashiren Farzilah and Masaya, Kudo and Hanamoto, Tsuyoshi (2016) A new maximum power point estimator control strategy to maximize output power of the double stator permanent magnet generator. Applied Sciences, 6 (8). pp. 1-12. ISSN 2076-3417

Mo'allim, Abdikani Abdullahi and Kamal, Md. Rowshon and Wayakok, Aimrun and Ahsan, Amimul and Mohamed, Abdirasak Ali and Moallim, Abdiaziz Abdullahi (2016) Utilization of global circulation models for climate change impacts assessments on agricultural water and crop production: a review. Asian Journal of Applied Sciences, 4 (2). pp. 226-240. ISSN 2321-0893

Moghaddasi, Majid and Mamdoohi, Ghazaleh and Muhammad Noor, Ahmad Shukri and Hitam, Salasiah and Ahmad Anas, Siti Barirah (2016) Evaluation of optical code division multiple access (OCDMA) encoding techniques for free space optics (FSO). Lasers in Engineering, 33 (4-6). pp. 229-245. ISSN 0898-1507; ESSN: 1029-029X

Moghbel, Mehrdad and Mashohor, Syamsiah and Mahmud, Rozi and Saripan, M. Iqbal (2016) Automatic liver segmentation on computed tomography using random walkers for treatment planning. EXCLI Journal, 15. pp. 500-517. ISSN 1611-2156

Moghbel, Mehrdad and Mashohor, Syamsiah and Mahmud, Rozi and Saripan, M. Iqbal (2016) Automatic liver tumor segmentation on computed tomography for patient treatment planning and monitoring. EXCLI Journal, 15. pp. 406-423. ISSN 1611-2156

Mohafez, Hamidreza and Ahmad, Siti Anom and Ahmad Roohi, Sharifah and Hadizadeh, Maryam (2016) Wound healing assessment using digital photography: a review. Journal of Biomedical Engineering and Medical Imaging, 3 (5). pp. 1-13. ISSN 2055-1266

Mohamad, Maizatul Akma and Mansor, Shattri and Ahmad, Noordin and Wan Adnan, Wan Azizun and Muhammad Wali, Islam (2016) The reliability of halal product transportation using GPS tracking system. Journal of Theoretical and Applied Information Technology, 90 (2). pp. 188-192. ISSN 1992-8645; ESSN: 1817-3195

Mohamad, Nur Aqilah and Azis, Norhafiz and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Yunus, Robiah and Ishak, Mohd Taufiq and Yaakub, Zaini (2016) Investigation on the dielectric, physical and chemical properties of palm oil and coconut oil under open thermal ageing condition. Journal of Electrical Engineering and Technology, 11 (3). pp. 690-698. ISSN 1975-0102; ESSN: 2093-7423

Mohamad, Nurul Lina and Mustapa Kamal, Siti Mazlina and Mokhtar, Mohd Noriznan and Hussain, Siti Aslina and Abdullah, Norhafizah (2016) Dynamic mathematical modelling of reaction kinetics for xylitol fermentation using Candida tropicalis. Biochemical Engineering Journal, 111. pp. 10-17. ISSN 1369-703X; ESSN: 1873-295X

Mohamad Aziz, Nur Atiqah and Yunus, Robiah and Rashid, Umer and Mohd Zulkifli, Nurin Wahidah (2016) Temperature effect on tribological properties of polyol ester-based environmentally adapted lubricant. Tribology International, 93 (pt. A). pp. 43-49. ISSN 0301-679X; ESSN: 1879-2464

Mohamad Idris, Aida Isma and Omar, Rozita and Idris, Azni (2016) Ultrasonication effects on ultrafiltration membrane cleaning and fouling mitigation. International Journal of Advances in Chemical Engineering and Biological Sciences (IJACEBS), 3 (1). pp. 151-154. ISSN 2349-1507; ESSN: 2349-1515

Mohamed, Salah Eldeen Gasim and Jasni, Jasronita and Mohd Radzi, Mohd Amran and Hizam, Hashim (2016) Power transistor-assisted Sen Transformer: a novel approach topower flow control. Electric Power Systems Research, 133. pp. 228-240. ISSN 0378-7796; ESSN: 1873-2046

Mohamed, Salah Eldeen Gasim and Jasni, Jasronita and Mohd Radzi, Mohd Amran and Hizam, Hashim (2016) Power transistor-assisted Sen transformer: a novel approach to power flow control. Electric Power Systems Research, 133. pp. 228-240. ISSN 0378-7796; ESSN: 1873-2046

Mohamed Ariff, Azmah Hanim and M. N., Mohamad Aznan and R., Muhammad Raimi and A., Muhammad Azrol Amin (2016) Interfacial reaction analysis of Sn-Ag-Cu solder reinforced with 0.01wt% CNTs with isothermal aging. Materials Science Forum, 864. pp. 175-179. ISSN 0255-5476; ESSN: 1662-9752

Mohamed Halip, N. H. and Isa, N. S. and Latif, A. A. and Mahdi, M. A. and Abu Bakar, M. H. (2016) Asymmetric fiber taper for narrow linewidth comb filter. Jurnal Teknologi, 78 (3). pp. 117-121. ISSN 0127-9696

Mohamed Halip, N. H. and Isa, N. S. and Latif, A. A. and Mahdi, Mohd Adzir and Abu Bakar, Muhammad Hafiz (2016) Asymmetric fiber taper for narrow linewidth comb filter. Jurnal Teknologi (Sciences and Engineering), 78 (3). pp. 117-121. ISSN 0127-9696; ESSN: 2180-3722

Mohammad, Saleem Ethaib and Omar, Rozita and Mustapa Kamal, Siti Mazlina and Awang Biak, Dayang Radiah and Syam, Syafiie and Harun, Mohd Yusof (2016) Effect of microwave-assisted acid or alkali pretreatment on sugar release from dragon fruit foliage. International Food Research Journal, 23 (suppl.). S149-S154. ISSN 1985-4668; ESSN: 2231-7546

Mohammad, Thamer Ahmad and Megat Mohd Noor, Megat Johari and Ghazali, Abdul Halim (2016) Assessment of using synthetic polymers in dewatering of sewage sludge. Desalination and Water Treatment, 57 (48-49). pp. 23308-23317. ISSN 1944-3994; ESSN: 1944-3986

Mohammad Noor, Siti Zaliha and Omar, Ahmad Maliki and Mohd Radzi, Mohd Amran and Mahzan, Najwa Nasuha (2016) Single stage string inverter for grid connected Photovoltaic system with Modified Perturb and Observe (P&O) Fuzzy Logic Control (FLC)-based MPPT technique. Journal of Electrical Systems and Information Technology, 12 (2). pp. 344-356. ISSN 1112-5209

Mohammad Taha, Mastura and Salit, Mohd Sapuan and Mansor, Muhd Ridzuan and Abdul Aziz, Nuraini (2016) Application of hybrid sugar palm-filled polyurethane composites in conceptual design of an automotive anti-roll bar. Journal of Engineering and Technology, 7 (1). pp. 102-113. ISSN 2180-3811; ESSN: 2289-814X

Mohammed, I. and Abu Talib, A. R. and H. Sultan, M. T. and Saadon, S. (2016) Temperature and heat flux measurement techniques for aeroengine fire test: a review. IOP Conference Series: Materials Science and Engineering, 152. pp. 1-12. ISSN 1757-8981; ESSN: 1757-899X

Mohammed, K. A. and Abu Talib, A. R. and Abdul Aziz, N. and Ahmed, K. A. (2016) Three dimensional numerical investigations on the heat transfer enhancement in a triangular facing step channels using nanofluid. IOP Conference Series: Materials Science and Engineering, 152 (1). pp. 1-9. ISSN 1757-8981

Mohammed, Kafel Azeez and Abu Talib, Abd. Rahim and Abdul Aziz, Nuraini and Ahmad, Khairul Arifin (2016) Review of forced convection nanofluids through corrugated facing step. Renewable and Sustainable Energy Reviews, 75 (2017). 234 - 241. ISSN 1364-0321; ESSN: 1879-0690

Mohammed, Umar and Wayayok, Aimrun and Mohd Soom, Mohd Amin and Abdan, Khalina and Zubairu, Usman Bashar (2016) Influence of soil cover on moisture content and weed suppression under system of rice intensification (SRI). Paddy and Water Environment, 14 (1). pp. 159-167. ISSN 1611-2490; ESSN: 1611-2504

Mohammed Hamza, Salahu and Ahsan, Amimul and Daura, H. A. and Imteaz, Monzur Alam and Ghazali, Abdul Halim and Mohamed, Thamer Ahmed (2016) Fractured rock aquifer delineation and assessment using spatial analysis in Kano, Nigeria. Arabian Journal of Geosciences, 9 (367). pp. 1-12. ISSN 1866-7511; ESSN: 1866-7538

Mohd Aridi, Nur Atirah and Salit, Mohd Sapuan and Zainudin, Edi Syams and Al-Oqla, Faris M. (2016) Investigating morphological and performance deterioration of injection-molded rice husk–polypropylene composites due to various liquid uptakes. International Journal of Polymer Analysis and Characterization, 21 (8). pp. 675-685. ISSN 1023-666X; ESSN: 1563-5341

Mohd Aridi, Nur Atirah and Salit, Mohd Sapuan and Zainudin, Edi Syams and Al-Oqla, Faris M. (2016) Mechanical and morphological properties of injection-molded rice husk polypropylene composites. International Journal of Polymer Analysis and Characterization, 21 (4). pp. 305-313. ISSN 1023-666X; ESSN: 1563-5341

Mohd Basri, Mohd Salahuddin and Mustapha, Faizal and Mazlan, Norkhairunnisa and Ishak, Mohamad Ridzwan (2016) Fire retardant performance of rice husk ash-based geopolymer coated mild steel - a factorial design and microstructure analysis. Materials Science Forum, 841. pp. 48-54. ISSN 0255-5476; ESSN: 1662-9752

Mohd Hanif, H. A. and Shamsudin, Rosnah and Mohd Adzahan, Noranizan (2016) Effects of UVC irradiation and thermal treatment on the physico-chemical properties and microbial reduction of clear and turbid tamarind juice. International Food Research Journal, 23 (suppl.). S107-S112. ISSN 1985-4668; ESSN: 2231-7546

Mohd Hanif, Hani and Shamsudin, Rosnah and Mohd Adzahan, Noranizan (2016) UVC dosage effects on the physico - chemical properties of lime (Citrus aurantifolia) juice. Food Science and Biotechnology, 25 (S). pp. 63-67. ISSN 1226-7708; ESSN: 2092-6456

Mohd Husin, Ezrin and Wayayok, Aimrun and Mohd Soom, Mohd Amin and Bejo, Siti Khairunniza (2016) Development of real time soil nutrient mapping system in paddy field. Jurnal Teknologi (Sciences & Engineering), 78 (1-2). pp. 125-131. ISSN 0127-9696; ESSN: 2180-3722

Mohd Noh, Zarina and Ramli, Abdul Rahman and Saripan, M. Iqbal and Hanafi, Marsyita (2016) Overview and challenges of palm vein biometric system. International Journal of Biometrics, 8 (1). pp. 2-18. ISSN 1755-8301; ESSN: 1755-831X

Mohd Razali, Sheriza and Atucha, Arnaldo Aitor Marin and Nuruddin, Ahmad Ainuddin and Abdul Hamid, Hazandy and Mohd Shafri, Helmi Zulhaidi (2016) Monitoring vegetation drought using MODIS remote sensing indices for natural forest and plantation areas. Journal of Spatial Science, 61 (1). pp. 157-172. ISSN 1449-8596; ESSN: 1836-5655

Mohd Razali, Sheriza and Marin Atucha, Arnaldo Aitor and Nuruddin, Ahmad Ainuddin and Mohd Shafri, Helmi Zulhaidi and Abdul Hamid, Hazandy (2016) Mapping human impact on Net Primary Productivity using MODIS data for better policy making. Applied Spatial Analysis and Policy, 9 (3). pp. 389-411. ISSN 1874-463X; ESSN: 1874-4621

Mohd Rosdan, Faridatul Ain and Yusof, Yus Aniza and Chin, Nyuk Ling and Mohd. Amin, Nor Amaiza and Mohd Ghazali, Hasanah (2016) Optimisation of an effervescent pineapple tablet. Journal of Biological Sciences, 16 (7). pp. 247-255. ISSN 1727-3048; ESSN: 1812-5719

Mohd Rosli, Muhammad Firdaus and Mahadi, Muhammad Razif and Misri, Muhammad Afiq and Wayayok, Aimrun (2016) Initial design of an automated system for paddy seedling placement in a germination tray. Jurnal Teknologi, 78 (1-2). pp. 119-123. ISSN 0127–9696; ESSN: 2180–3722

Mohd Rozalli, N. H. and Chin, Nyuk Ling and Yusof, Yus Aniza and Mahyudin, Nor Ainy (2016) Quality changes of stabilizer-free natural peanut butter during storage. Journal of Food Science and Technology, 53 (1). pp. 694-702. ISSN 0022-1155; ESSN: 0975-8402

Mohd Rozalli, Norazatul Hanim and Chin, Nyuk Ling and Yusof, Yus Aniza (2016) Effects of grinding time on rheological, textural and physical properties of natural peanut butter stored at different temperatures. Journal of Texture Studies, 47 (2). pp. 131-141. ISSN 0022-4901; ESSN: 1745-4603

Mohd Salleh, Mohamad Amran and Rashed, Musaab K. and Abdulbari, Hayder A. and M. Halim Shah, Ismail (2016) A novel polymer-surfactant complex mixture to improve diesel fuel flow in a rotating disk apparatus. Advances and Applications in Fluid Mechanics, 19 (3). pp. 689-685. ISSN 0973-4686

Mohd Salleh, Salwani and Ali, Aidy and Sahari, Barkawi and Abdul Aziz, Nuraini (2016) Effect of automotive side member materials on the head injury criteria (HIC) and chest severity index (CSI) of adult passenger. International Journal of Engineering and Technologies, 7. pp. 47-59. ISSN 2297-623X

Mohd Thani, Nurfatimah and Mustapa Kamal, Siti Mazlina and Taip, Farah Saleena and Awang Biak, Dayang Radiah (2016) Evaluation on safety and sensory analysis of xylitol substituted dadih. International Food Research Journal, 23 (suppl.). S203-S208. ISSN 1985-4668; ESSN: 2231-7546

Mohd Yunos, Mohd Amirul Syafiq and Hussain, Siti Aslina and Mohamed Yusoff, Hamdan and Abdullah, Jaafar (2016) Industrial radiotracer technology for process optimizations in chemical industries – a review. Pertanika Journal of Scholarly Research Reviews, 2 (3). pp. 20-46. ISSN 2462-2028

Mohd Yusuff, Rosnah and Baba, Zuraidah and Md. Dawal, Siti Zawiah and Tan, Evelyn (2016) Malaysian ergonomics standards – its development, awareness and implementation - a review article. Iranian Journal of Public Health, 45 (suppl. 1). pp. 1-8. ISSN 2251-6085; ESSN: 2251-6093

Mohd Yusuff, Rosnah and Baba, Zuraidah and Md. Dawal, Siti Zawiah and Tan, Evelyn (2016) Malaysian ergonomics standards-its development, awareness and implementation- a review article. Iranian Journal of Public Health, 45 (suppl.1). pp. 1-8. ISSN 2251-6085; ESSN: 2251-6093

Mohd Yusuff, Rosnah and Daruis, Dian Darina Indah and Md. Dawal, Siti Zawiah and Hassan, Siti Nurani (2016) Development of an anthropometry database for the Malaysian population: problems and challenges. Malaysian Journal of Public Health Medicine, 16 (suppl.2). pp. 36-43. ISSN 1675-0306

Mohd Zainuri, Muhammad Ammirrul Atiqi and Mohd Radzi, Mohd Amran and Che Soh, Azura and Mariun, Norman and Abd Rahim, Nasrudin (2016) DC-link capacitor voltage control for single-phase shunt active power filter with step size error cancellation in self-charging algorithm. IET Power Electronics, 9 (2). pp. 323-335. ISSN 1755-4543

Mohd Zainuri, Muhammad Ammirrul Atiqi and Mohd Radzi, Mohd Amran and Che Soh, Azura and Mariun, Norman and Abd Rahim, Nasrudin (2016) Simplified adaptive linear neuron harmonics extraction algorithm for dynamic performance of shunt active power filter. International Review on Modelling and Simulations, 9 (3). pp. 144-154. ISSN 1974-9821; ESSN: 1974-983X

Mohd Zainuri, Muhammad Ammirrul Atiqi and Mohd Radzi, Mohd Amran and Che Soh, Azura and Mariun, Norman and Abd Rahim, Nasrudin and Hajighorbani, Shahrooz (2016) Fundamental active current adaptive linear neural networks for photovoltaic shunt active power filters. Energies, 9 (6). art. no. 397. pp. 1-20. ISSN 1996-1073

Mohd Zainuri, Muhammad Ammirrul Atiqi and Mohd Radzi, Mohd Amran and Che Soh, Azura and Mariun, Norman and Abd. Rahim, Nasrudin (2016) Improved ADALINE harmonics extraction algorithm for boosting performance of photovoltaic shunt active power filter under dynamic operations. Journal of Electrical Engineering and Technology, 11 (6). pp. 1714-1728. ISSN 1975-0102; ESSN: 2093-7423

Mohtar, Mohd Nazim and Ziaudin Ahamed, Muhammad Ubaid and Ismail, N. F. and Md. Yunus, Nurul Amziah and Shafie, Suhaidi (2016) Effect of interelectrode gap to the manipulations of peprints using AC Electroosmosis. International Journal of Control Theory and Applications, 9 (31). pp. 31-36. ISSN 0974-5572

Mokri, Siti Salasiah and Saripan, M. Iqbal and Abd. Rahni, Ashrani Aizzuddin and Nordin, Abdul Jalil and Hashim, Suhairul and Marhaban, Mohammad Hamiruce (2016) PET image reconstruction incorporating 3D mean-median sinogram filtering. IEEE Transactions on Nuclear Science, 63 (1). pp. 157-169. ISSN 0018-9499

Mostafa, Nawras H. and Zahari, Nur Ismarrubie and Mohd. Sapuan Salit, Mohd. Sapuan and Hameed Sultan, Mohamed Thariq (2016) Effect of equi-biaxially fabric prestressing on the tensile performance of woven E-glass/polyester reinforced composites. Journal of Reinforced Plastics and Composites, 35 (14). pp. 1093-1103. ISSN 0731-6844; ESSN: 1530-7964

Muazu, Aliyu and Yahya, Azmi and Wan Ishak, Wan Ismail and Bejo, Siti Khairunniza (2016) Optimization of energy use intensity using data envelopment analysis and benchmarking methodology for sustainable rice cultivation under wetland direct seeding conditions in Malaysia. Jurnal Teknologi, 78 (1-2). pp. 21-28. ISSN 0127-9696; ESSN: 2180-3722

Mugahed Amran, Y. H. and Muhammad Rashid, Raizal Saifulnaz and Hejazi, Farzad and Safiee, Nor Azizi and Abang Ali, Abang Abdullah (2016) Structural behavior of laterally loaded precast foamed concrete sandwich panel. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 10 (3). pp. 255-263.

Mugahed Amran, Y. H. and Muhammad Rashid, Raizal Saifulnaz and Hejazi, Farzad and Safiee, Nor Azizi and Abang Ali, Abang Abdullah (2016) Structural behavior of precast foamed concrete sandwich panel subjected vertical in-plane shear loading. International Journal of Civil & Environmental Engineering, 10 (6). pp. 705-714. ISSN 2010-3883; ESSN: 2010-3891

Mugahed Amran, Y. H. and Muhammad Rashid, ‪Raizal Saifulnaz and Hejazi, Farzad and Safiee, Nor Azizi and A.A., Abang Ali (2016) Response of precast foamed concrete sandwich panels to flexural loading. Journal of Building Engineering, 7. pp. 143-158. ISSN 2352-7102

Muhammad Amin, Ahmad Fairuz and Salit, Mohd Sapuan and Zainudin, Edi Syams and Jaafar, Che Nor Aiza (2016) Effect of filler loading on mechanical properties of pultruded kenaf fibre reinforced vinyl ester composites. Journal of Mechanical Engineering and Sciences, 10 (1). pp. 1931-1942. ISSN 2289-4659; ESSN: 2231-8380

Muhammad Chatib Quzwain, Kamelia and Ismail, Alyani and Sali, Aduwati (2016) Compact high gain and wideband octagon microstrip Yagi antenna. Electromagnetics, 36 (8). pp. 524-533. ISSN 0272-6343; ESSN: 1532-527X

Muhammad Yamin and Wan Ismail, Wan Ishak and Mohd Kassim, Muhamad Saufi and Abd Aziz, Samsuzana and Shamshiri, Redmond Ramin (2016) VRT liquid fertilizer applicator for soil nutrient management. Jurnal Teknologi, 78 (1-2). pp. 73-78. ISSN 0127-9696

Mukhtar, Isma'ila and Leman, Zulkiflle and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams (2016) Sugar palm fibre and its composites: a review of recent developments. BioResources, 11 (4). pp. 10756-10782. ISSN 1930-2126

Musa, Baktiar and Mustapha Kamil, Yasmin and Abu Bakar, Muhammad Hafiz and Muhammad Noor, Ahmad Shukri and Ismail, Alyani and Mahdi, Mohd Adzir (2016) Effects of taper parameters on free spectral range of non-adiabatic tapered optical fibers for sensing applications. Microwave and Optical Technology Letters, 58 (4). pp. 798-803. ISSN 0895-2477; ESSN: 1098-2760

Musa, Baktiar and Mustapha Kamil, Yasmin and Abu Bakar, Muhammad Hafiz and Muhammad Noor, Ahmad Shukri and Ismail, Alyani and Mahdi, Mohd Adzir (2016) Investigating the effect of taper length on sensitivity of the tapered-fiber based temperature sensor. Jurnal Teknologi (Sciences & Engineering), 78 (3). pp. 135-140. ISSN 0127-9696; ESSN: 2180-3722

Mustapha, S. and El-Harbawi, M. (2016) Consequence analysis of catastrophic release of diesel and fuel oil from their storage tanks using SCIA software. American Chemical Science Journal, 10 (4). art. no. ACSJ.22091. pp. 1-7. ISSN 2249-0205

Mustapha, Sa'ari and El-Harbawi, Mohanad (2016) Capability of GIS in the analysis of explosion hazard from BLEVE event in LPG terminal. American Scientific Research Journal for Engineering, Technology, and Sciences, 26 (4). pp. 343-363. ISSN 2313-4410; ESSN: 2313-4402

Mustapha, Sa’ari and El-Harbawi, Mohanad (2016) Assessing of feasible Independent Protection Layers (IPLs) using Layer of Protection Analysis (LOPA) for flood emergency risk management. American Scientific Research Journal for Engineering, Technology, and Sciences, 26 (4). pp. 330-342. ISSN 2313-4410; ESSN: 2313-4402

Naeem, Nadeem and Ismail, Alyani and Alhawari, Adam Reda Hasan and Mahdi, Mohd Adzir (2016) Over layer sensing using terahertz meta-material split ring resonator. Sensor Letters, 14 (4). pp. 447-450. ISSN 1546-198X; ESSN: 1546-1971

Nafea, Safa Nassr and Ismail, Alyani and Raja Abdullah, Raja Syamsul Azmir (2016) Low side lobe level multilayer antenna for wireless applications. Progress In Electromagnetics Research Letters, 58. pp. 105-111. ISSN 1937-6480

Naim, Mohd Nazli and Yeon, Hui Ting and Zakaria, Rabitah and Baharuddin, Azhari Samsu and Md Yunos, Khairul Faezah and Abu Bakar, Noor Fitrah and Lenggoro, I. Wuled (2016) Removal of fine iron-oxide peprintss after post-filtration in local potable water using an electrophoretic method. Journal of Water Process Engineering, 9. pp. 208-214. ISSN 2214-7144

Naim, Mohd Nazli and Yeon, Hui Ting and Zakaria, Rabitah and Samsu Baharuddin, Azhari and Md. Yunos, Khairul Faezah and Abu Bakar, Noor Fitrah and Lenggoro, Ignatius Wuled (2016) Removal of fine iron-oxide particles after post-filtration in local potable water using an electrophoretic method. Journal of Water Process Engineering, 9. pp. 208-214. ISSN 2214-7144

Nazir, Muhammad Anwer and Kamsani, Noor Ain and Azis, Norhafiz and Mohd Radzi, Mohd Amran and Wan Hassan, Wan Zuha (2016) Integration of ultra-capacitor and battery as hybrid energy storage with intelligent controller for efficient electric vehicle application. International Journal of Control Theory and Applications, 9 (5). pp. 345-355. ISSN 0974-5572

Nazmi, Nurhazimah and Abdul Rahman, Mohd Azizi and Yamamoto, Shin-Ichiroh and Ahmad, Siti Anom and Zamzuri, Hairi and Mazlan, Saiful Amri (2016) A review of classification techniques of EMG signals during isotonic and isometric contractions. Sensors, 16 (8). pp. 1-28. ISSN 1424-8220

Nik Daud, Nik Norsyahariati and Abdul Jalil, Falil Nisa and Mohd. Jakarni, Fauzan and Ahsan, Amimul (2016) Application of agricultural waste in residual soil for subgrade work. Journal of Advanced Civil Engineering Practice and Research, 2 (1). pp. 2-6. ISSN ESSN: 2550-1933

Nik Daud, Nik Norsyahariati and Ismail, F. A. and Ahsan, Amimul and Amdam, A. (2016) Lake water quality monitoring and prediction: natural attenuation. Journal of Desalination and Water Purification, 4 (1). pp. 8-12. ISSN 0128-2387

Nik Daud, Nik Norsyahariati and Izehar, Nur Hazwani (2016) Study on water quality of unconfined and confined aquifer in Selangor: aeration method. Jurnal Teknologi, 78 (9-4). pp. 47-54. ISSN 0127–9696; ESSN: 2180–3722

Nik Daud, Nik Norsyahariati and Muhammed, Abubakar Sadiq and Md Yusoff, Zainuddin (2016) Geotechnical assessment of palm oil fuel ash (POFA) mixed with granite residual soil for hydraulic barrier purposes. Malaysian Journal of Civil Engineering, 28 (spec.1). pp. 1-9. ISSN 1823-7843

Nik Daud, Nik Norsyahariati and Muhammed, Abubakar Sadiq and Misban, Nadwatul Khodijah and Wan Yaacob, Wan Zuhairi (2016) Attenuation capacity of soil mixed with palm oil fuel ash (POFA) liner for treating leachate. Jurnal Teknologi, 78 (8-6). pp. 99-103. ISSN 0127-9696; ESSN: 2180-3722

Nik Daud, Nik Norsyahariati and Oyekanmi, Adeleke Abdulrahman and Idrus, Syazwani (2016) Preliminary assessment of lakes water quality status at campus area in Selangor, Malaysia. Malaysian Journal of Civil Engineering, 28 (spec.1). pp. 42-49. ISSN 1823-7843

Noerhidajat, and Yunus, Robiah and Zainal Abidin, Zurina and Syam, Syafiie and Ramanaidu, V. and Rashid, Umer (2016) Effect of high pressurized sterilization on oil palm fruit digestion operation. International Food Research Journal, 23 (1). pp. 129-134. ISSN 1985-4668; ESSN: 2231-7546

Nor Ilia Anisa and Morad, Noor Azian and Iwai, Yoshio and Ismail, Mohd Halim Shah (2016) Molecular dynamics simulation for self-diffusion coefficients of ginger bioactive compounds in subcritical water with and without ethanol. Fluid Phase Equilibria, 407. 197.e1-197.e10. ISSN 0378-3812

Nourqolipour, Ramin and Mohamed Shariff, Abdul Rashid and Balasundram, Siva Kumar and Ahmad, Noordin and Mohd Sood, Alias and Buyong, Taher (2016) Predicting the effects of urban development on land transition and spatial patterns of land use in western Peninsular Malaysia. Applied Spatial Analysis and Policy, 9 (1). pp. 1-19. ISSN 1874-463X; ESSN: 1874-4621

O., Akinbile C. and R., Semowo O. and E., Babalola T. and C. M., Hasfalina (2016) Assessment of the influence of continuous and intermittent irrigation on greenhouse gas emissions from paddy rice. Jurnal Teknologi, 78 (1-2). pp. 1-7. ISSN 0127-9696; ESSN: 2180-3722

Obaid, Maytham Kadhim and Abdullah, Luqman Chuah and Tharwani, Intidhar Jabir Idan (2016) Removal of reactive orange 16 dye from aqueous solution by using modified kenaf core fiber. Journal of Chemistry, 2016. art. no. 4262578. pp. 1-7. ISSN 2090-9063; ESSN: 2090-9071

Oloruntade, Ajayi Johnson and Mohammad, Thamer Ahmad and Ghazali, Abdul Halim and Wayayok, Aimrun (2016) Spatial and temporal trends in mean, maximum and minimum temperature in the Niger-South Basin, Nigeria. Malaysian Journal of Civil Engineering, 28 (3). pp. 365-381. ISSN 1823-7843

Omar, Farah Nadia and Hanipah, Suhaiza Hanim and Xiang, Loo Yu and P. Mohammed, Mohd Afandi and Baharuddin, Azhari Samsu and Abdullah, Jaafar (2016) Micromechanical modelling of oil palm empty fruit bunch fibres containing silica bodies. Journal of the Mechanical Behavior of Biomedical Materials, 62. pp. 106-118. ISSN 1751-6161; ESSN: 1878-0180

Omar, Hend Ali and Md. Yusoff, Nur Izzi and Sajuri, Zainuddin and Ceylan, Halil and Mohd Jakarni, Fauzan and Ismail, Amiruddin (2016) Determining the effects of aging on halloysite nano-tube modified binders through the pull-off test method. Construction and Building Materials, 126 (2016). pp. 245-252. ISSN 0950-0618

Onwude, Daniel I. and Abdulstter, Rafia and Gomes, Chandima and Hashim, Norhashila (2016) Mechanisation of large-scale agricultural fields in developing countries – a review. Journal of the Science of Food and Agriculture, 96 (12). pp. 3969-3976. ISSN 0022-5142; ESSN: 1097-0010

Onwude, Daniel Iroemeha and Hashim, Norhashila and Chen, Guangnan (2016) Recent advances of novel thermal combined hot air drying of agricultural crops. Trends in Food Science & Technology, 57 (pt. A). pp. 132-145. ISSN 0924-2244; ESSN: 1879-3053

Onwude, Daniel Iroemeha and Hashim, Norhashila and Janius, Rimfiel and Mat Nawi, Nazmi and Abdan, Khalina (2016) Modeling the thin-layer drying of fruits and vegetables: a review. Comprehensive Reviews in Food Science and Food Safety, 15 (3). pp. 599-618. ISSN 1541-4337

Onwude, Daniel Iroemeha and Hashim, Norhashila and Janius, Rimfiel and Mat Nawi, Nazmi and Abdan, Khalina (2016) Modelling effective moisture diffusivity of pumpkin (Cucurbita moschata) slices under convective hot air drying condition. International Journal of Food Engineering, 12 (5). pp. 481-489. ISSN 2194-5764; ESSN: 1556-3758

Osman, Rosiah and Ramli, Abd Rahman and Wan Adnan, Wan Azizun and Hasan, Intan Helina (2016) Performance of Ultra High Frequency Gen2 Passive Tags Radio Frequency Identification in chemical laboratory environment. World Applied Sciences Journal, 34 (7). pp. 905-910. ISSN 1818-4952; ESSN: 1991-6426

Ostovan, Farhad and Matori, Khamirul Amin and Mohamed Yusoff, Hamdan and Yunus, Robiah and Mohamed Ariff, Azmah Hanim and Toozandehjani, Meysam and Meschian, Mohammad Reza (2016) Investigation of the structure and hardness of quenched sintered materials produced from iron-base alloyed powders (Astaloy E). Metal Science and Heat Treatment, 58 (7-8). pp. 431-434. ISSN 0026-0673; ESSN: 1573-8973

Ostovan, Farhad and Matori, Khamirul Amin and Toozandehjani, Meysam and Oskoueian, Arshin and Mohamed Yusoff, Hamdan and Yunus, Robiah and Mohamed Ariff, Azmah Hanim (2016) Nanomechanical behavior of multi-walled carbon nanotubes particulate reinforced aluminum nanocomposites prepared by ball milling. Materials, 9 (3). pp. 1-9. ISSN 1996-1944

Othman, M. S. and Chun, O. T. and Harmin, M. Y. and Romli, F. I. (2016) Aeroelastic effects of a simple rectangular wing-box model with varying rib orientations. IOP Conference Series: Materials Science and Engineering, 152. pp. 1-5. ISSN 1757-8981; ESSN: 1757-899X

Othman, Noor Fadzlinda and Ya'acob, Mohammad Effendy and Abdul Samad, Abdul Rahim and Othman, Mohd Shahwahid and Hizam, Hashim and Ramlan, Mohd Fauzi (2016) Integration of solar dryer technologies in high value herbal crops production for Malaysia: pathway for a sustainable future. International Food Research Journal, 23 (suppl.). S51-S55. ISSN 1985-4668; ESSN: 2231-7546

Othman, Norashiken and Romli, Fairuz Izzudin (2016) Mental workload evaluation of pilots using pupil dilation. International Review of Aerospace Engineering, 9 (3). pp. 80-84. ISSN 1973-7459; ESSN: 1973-7440

Pai, Raghuvir and Abdul Khader, Shah Mohammed and Ayachit, Anurag and Ahmad, Kamarul Arifin and Mohammad Zubair and Rao, V. R. K. and Sevagur, Ganesh Kamath (2016) Fluid-structure interaction study of stenotic flow in subject specific carotid bifurcation: a case study. Journal of Medical Imaging and Health Informatics, 6 (6). pp. 1494-1499. ISSN 2156-7018; ESSN: 2156-7026

Pandeya, B. and Buytaert, W. and Zulkafli, Z. and Karpouzoglou, T. and Mao, F. and Hannah, D. M. (2016) A comparative analysis of ecosystem services valuation approaches for application at the local scale and in data scarce regions. Ecosystem Services, 22. pp. 250-259. ISSN 2212-0416

Panjehpour, Mohammad and Farzadnia, Nima and Demirboga, Ramazan and Abang Ali, Abang Abdullah (2016) Behavior of high-strength concrete cylinders repaired with CFRP sheets. Journal of Civil Engineering and Management, 22 (1). pp. 56-64. ISSN 1392-3730; ESSN: 1822-3605

Parveen, Sajida and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Hasan Abbas, Nidaa and Wan Adnan, Wan Azizun and Hanafi, Marsyita and Naeem, Nadeem (2016) Face liveness detection using Dynamic Local Ternary Pattern (DLTP). Computers, 5 (2). pp. 1-15. ISSN 2073-431X

Parveen, Sajida and Syed Ahmed, Sharifah Mumtazah and Hasan Abbas, Nidaa and Naeem, Nadeem and Hanafi, Marsyita (2016) Texture analysis using local ternary pattern for face anti-spoofing. Science International, 28 (2). pp. 965-971. ISSN 1013-5316

Pham, Binh Thai and Pradhan, Biswajeet and Bui, Dieu Tien and Prakash, Indra and Dholakia, M. B. (2016) A comparative study of different machine learning methods for landslide susceptibility assessment: a case study of Uttarakhand area (India). Environmental Modelling & Software, 84. pp. 240-250. ISSN 1364-8152

Phuah, Eng Tong and Lee, Yee Ying and Tang, Teck Kim and Lai, Oi Ming and Choong, Thomas Shean Yaw and Tan, Chin Ping and Ng, Wee Nak and Lo, Seong Koon (2016) Modeling and optimization of lipase-catalyzed partial hydrolysis for diacylglycerol production in packed bed reactor. International Journal of Food Engineering, 12 (7). pp. 681-689. ISSN 2194-5764; ESSN: 1556-3758

Pourakbar, Shahram and Kim Huat, Bujang and Asadi, Afshin and Fasihnikoutalab, Mohammad Hamed (2016) Model study of alkali-activated waste binder for soil stabilization. International Journal of Geosynthetics and Ground Engineering, 2 (35). pp. 1-12. ISSN 2199-9260; ESSN: 2199-9279

Pourghasemi, Hamid Reza and Beheshtirad, Masood and Pradhan, Biswajeet (2016) A comparative assessment of prediction capabilities of modified analytical hierarchy process (M-AHP) and Mamdani fuzzy logic models using Netcad-GIS for forest fire susceptibility mapping. Geomatics, Natural Hazards and Risk, 7 (2). pp. 861-885. ISSN 1947-5705; ESSN: 1947-5713

Pourzolfaghar, Zohreh and Ibrahim, Rahinah and Adam, Nor Mariah (2016) Explicating mechanical and electrical knowledge for design phase of green building projects. Journal of Information & Knowledge Management, 15 (1). art. no. 1650002. pp. 1-13. ISSN 0219-6492; ESSN: 1793-6926

Pradhan, Biswajeet and Jebur, Mustafa Neamah and Mohd Shafri, Helmi Zulhaidi and Tehrany, Mahyat Shafapour (2016) Data fusion technique using wavelet transform and taguchi methods for automatic landslide detection from airborne laser scanning data and QuickBird satellite imagery. IEEE Transactions on Geoscience and Remote Sensing, 54 (3). pp. 1610-1621. ISSN 0196-2892; ESSN: 1558-0644

Pradhan, Biswajeet and Tehrany, Mahyat Shafapour and Jebur, Mustafa Neamah (2016) A new semiautomated detection mapping of flood extent from TerraSAR-X satellite image using rule-based classification and Taguchi optimization techniques. IEEE Transactions on Geoscience and Remote Sensing, 54 (7). pp. 4331-4342. ISSN 0196-2892; ESSN: 1558-0644

Prasetyo, Luisa and Abdul Razak, Mus’ab and Do, Duong D. and Horikawa, Toshihide and Nakai, Kazuyuki and Nicholson, David (2016) On the resolution of constant isosteric heat of propylene adsorptionon graphite in the sub-monolayer coverage region. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 512. pp. 101-110. ISSN 0927-7757; ESSN: 1873-4359

Puah, Yan Jun and Huang, Yuk Feng and Chua, Kuan Chin and Lee, Teang Shui (2016) River catchment rainfall series analysis using additive Holt–Winters method. Journal of Earth System Science, 125 (2). pp. 269-283. ISSN 0253-4126; ESSN: 0973-774X

Rafukka, Ibrahim Abdullahi and Sahari, Barkawi and Abdul Aziz, Nuraini and Arumugam, Manohar (2016) Anthropometric comparison of three-year-old Nigerian child and crash dummies. Journal of Transportation Technologies, 6 (4). pp. 192-199. ISSN 2160-0473; ESSN: 2160-0481

Rafukka, Ibrahim Abdullahi and Sahari, Barkawi and Abdul Aziz, Nuraini and Arumugam, Manohar (2016) Child dummy finite element models development: a review. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6649-6656. ISSN 1819-6608

Rafukka, Ibrahim Abdullahi and Sahari, Barkawi and Abdul Aziz, Nuraini and Arumugam, Manohar (2016) A modified hybrid III 6-year-old dummy head model for lateral impact assessment. International Journal of Vehicular Technology, 2016. art. no. 1768512. pp. 1-8. ISSN 1687-5702; ESSN: 1687-5710

Rahimi, I. and Askari, M. T. and Tang, S. H. and Lee, L. S. and Ahmad, S. Azfanizam and Sharaf, Adel M. (2016) Development model for supply chain network design by demand uncertainty and mode selection. International Journal of Applied Operational Research, 6 (1). pp. 51-64. ISSN 2251-6867

Rahimi, Zahra and Muniandy, Ratnasamy (2016) quantification of coarse aggregate angularity by a newly developed auto grader machine. Current World Environment, 11 (spec. 1). pp. 45-53. ISSN 0973-4929; ESSN: 2320-8031

Raja Abdullah, Raja Syamsul Azmir and Abdul Aziz, Noor Hafizah and Abdul Rashid, Nur Emileen and Salah, Asem Ahmad and Hashim, Fazirulhisyam (2016) Analysis on target detection and classification in LTE based passive forward scattering radar. Sensors, 16 (10). art. no. 1607. pp. 1-16. ISSN 1424-8220

Raja Abdullah, Raja Syamsul Azmir and Mohd Ali, Azizi and A. Rasid, Mohd Fadlee and Abdul Rashid, Nur Emileen and Salah, Asem Ahmad and Munawar, Aris (2016) Joint time-frequency signal processing scheme in forward scattering radar with a rotational transmitter. Remote Sensing, 8 (12). pp. 1-18. ISSN 2072-4292

Raja Abdullah, Raja Syamsul Azmir and Salah, Asem A. and Ismail, Alyani and Hashim, Fazirulhisyam and Abdul Rashid, Nur Emileen and Abdul Aziz, Nor Hafizah (2016) Experimental investigation on target detection and tracking in passive radar using long-term evolution signal. IET Radar, Sonar & Navigation, 10 (3). pp. 577-585. ISSN 1751-8784

Raja Abdullah, Raja Syamsul Azmir and Salah, Asem Ahmad and Ismail, Alyani and Hashim, Fazirulhisyam and Abdul Rashid, Nur Emileen and Abdul Aziz, Noor Hafizah (2016) LTE-based passive bistatic radar system for detection of ground-moving targets. ETRI Journal, 38 (2). pp. 302-313. ISSN 1225-6463; ESSN: 2233-7326

Ramalu, Tanaselan and Mohd Radzi, Mohd Amran and Mohd Zainuri, Muhammad Ammirrul Atiqi and Abdul Wahab, Noor Izzri and Abdul Rahman, Ribhan Zafira (2016) Dual-fuzzy MPPT in photovoltaic-DC analysis for dual-load operation with SEPIC converter. International Journal of Simulation: Systems, Science & Technology, 17 (41). 46.1-46.6. ISSN 1473-8031; ESSN: 1473-804X

Ramalu, Tanaselan and Mohd Radzi, Mohd Amran and Mohd Zainuri, Muhammad Ammirrul Atiqi and Abdul Wahab, Noor Izzri and Abdul Rahman, Ribhan Zafira (2016) A photovoltaic-based SEPIC converter with dual-fuzzy maximum power point tracking for optimal buck and boost operations. Energies, 9 (8). art. no. 604. pp. 1-17. ISSN 1996-1073

Ramli, Azlinda and Ismail, Alyani and Alhawari, Adam Reda Hasan and Mahdi, Mohd Adzir (2016) The effect of the metamaterial superstrate to the vertically stacked bandpass filter antenna performances. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3147-3149. ISSN 1819-6608

Ramli, Rosmamuhamadani and Sulaiman, Shamsuddin and Hanim, Mohamed Ariff Azmah and Ismail, Mohd Idris Shah and Talari, Mahesh (2016) Mechanical and microstructure characterization of aluminium-copper (Al-Cu) reinforced with in situ titanium diboride (TiB2). Key Engineering Materials, 673. pp. 117-125. ISSN 1013-9826; ESSN: 1662-9795

Rashid, Bushra and Leman, Zulkiflle and Jawaid, Mohamad and Ghazali, Mariyam Jameelah and Ishak, Mohamad Ridzwan (2016) Physicochemical and thermal properties of lignocellulosic fiber from sugar palm fibers: effect of treatment. Cellulose, 23 (5). pp. 2905-2916. ISSN 0969-0239; ESSN: 1572-882X

Rashid, Bushra and Leman, Zulkiflle and Jawaid, Mohammad and Ghazali, Mariyam Jameelah and Ishak, Mohamad Ridzwan (2016) The mechanical performance of sugar palm fibres (Ijuk) reinforced phenolic composites. International Journal of Precision Engineering and Manufacturing, 17 (8). pp. 1001-1008. ISSN 2234-7593

Ratnam, Chantara Thevy and Ramarad, Suganti and Siddiqui, Mohd Khalid and Zainal Abidin, Anis Sakinah and Abdullah, Luqman Chuah (2016) Irradiation cross-linking of ethylene vinyl acetate/waste tire dust: effect of multifunctional acrylates. Journal of Thermoplastic Composite Materials, 29 (4). pp. 464-478. ISSN 0892-7057; ESSN: 1530-7980

Razali, Nadlene and Salit, Mohd Sapuan and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and Lazim, Yusriah (2016) Mechanical and thermal properties of roselle fibre reinforced vinyl ester composites. BioResources, 11 (4). pp. 9325-9339. ISSN 1930-2126

Razali, Nadlene and Salit, Mohd Sapuan and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and Lazim, Yusriah (2016) A review on roselle fiber and its composites. Journal of Natural Fibers, 13 (1). pp. 10-41. ISSN 1544-0478; ESSN: 1544-046X

Rehan, Mohammad and Nizami, Abdul Sattar and Shahzad, Khurram and Ouda, Omar K. M. and Ismail, I. M. I. and Almeelbi, Talal and Iqbal, Tariq and Demirbas, Ayhan (2016) Pyrolytic liquid fuel: a source of renewable electricity generation in Makkah. Energy Sources, Part A: Recovery, Utilization, and Environmental Effect, 38 (17). pp. 2598-2603. ISSN 1556-7036; ESSN: 1556-7230

Renny Eka Putri, and Yahya, Azmi and Adam, Nor Mariah and Abd Aziz, Samsuzana (2016) Performance evaluation of yield monitoring system for rice combine harvester in Selangor, Malaysia. International Journal on Advanced Science, Engineering and Information Technology, 6 (1). pp. 35-39. ISSN 2088-5334; ESSN: 2460-6952

Renny Eka Putri, and Yahya, Azmi and Adam, Nor Mariah and Abd Aziz, Samsuzana (2016) Variability of rice yield with respect to crop health. Jurnal Teknologi, 78 (1-2). pp. 79-85. ISSN 0127-9696; ESSN: 2180-3722

Risyon, Nazratul Putri and Othman, Siti Hajar and Kadir Basha, Roseliza and A. Talib, Rosnita (2016) Effect of halloysite nanoclay concentration and addition of glycerol on mechanical properties of bionanocomposite films. Polymers and Polymer Composites, 24 (9). pp. 795-802. ISSN 0967-3911; ESSN: 1478-2391

Rizeei, Hossein Mojaddadi and Saharkhiz, Maryam Adel and Pradhan, Biswajeet and Ahmad, Noordin (2016) Soil erosion prediction based on land cover dynamics at the Semenyih watershed in Malaysia using LTM and USLE models. Geocarto International, 31 (10). pp. 1158-1177. ISSN 1010-6049; ESSN: 1752-0762

Roslan, Muhammad Kamil and Misron, Norhisam and Aris, Ishak and Hamidon, Mohd Nizar and Tashiro, Kunihisa (2016) Magnetic imaging concept using giant magnetoresistance (GMR) sensor. International Journal of Control Theory and Applications, 9 (5). pp. 2415-2421. ISSN 0974-5572

Rosli, Nurul Shafiqah and Idrus, S. and Nik Daud, N. and Ahsan, A. (2016) Assessment of potential biogas production from rice straw leachate in upflow anaerobic sludge blanket reactor. International Journal of Smart Grid and Clean Energy, 5 (3). pp. 135-143. ISSN 2315-4462; ESSN: 2373-3594

Rusek, K. and El-Naggar, A. M. and Albassam, A. and Narayana, Gandham Lakshmi and Kolcun, M. and Chmiel, M. and Myronchuk, G. (2016) Laser induced birefringence in La–Ga–S–O–Gd glass polymer nanocomposites. Journal of Materials Science: Materials in Electronics, 27 (7). pp. 6745-6749. ISSN 0957-4522; ESSN: 1573-482X

Saadatkhah, Nader and Mansor, Shattri and Kassim, Azman and Lee, Min Lee and Saadatkhah, Reza and Sobhanmanesh, Ali (2016) Regional modeling of rainfall-induced landslides using TRIGRS model by incorporating plant cover effects: case study in Hulu Kelang, Malaysia. Environmental Earth Sciences, 75 (5). art. no. 445. pp. 1-20. ISSN 1866-6280; ESSN: 1866-6299

Saadatkhah, Nader and Tehrani, Mohammadreza Hadad and Mansor, Shattri and Khuzaimah, Zailani and Kassim, Azman and Saadatkhah, Reza (2016) Impact assessment of land cover changes on the runoff changes on the extreme flood events in the Kelantan River basin. Arabian Journal of Geosciences, 9 (17). art. no. 687. pp. 1-17. ISSN 1866-7511; ESSN: 1866-7538

Saadon, S. and Abu Talib, A. R. (2016) An analytical study on the performance of the organic rankine cycle for turbofan engine exhaust heat recovery. IOP Conference Series: Materials Science and Engineering, 152 (1). pp. 1-9. ISSN 1757-899X

Saadon, Syamimi and Gaillard, Leon and Giroux-Julien, Stéphanie and Ménézo, Christophe (2016) Simulation study of a naturally-ventilated building integrated photovoltaic/thermal (BIPV/T) envelope. Renewable Energy, 87 (pt. 1). pp. 517-531. ISSN 0960-1481; ESSN: 1879-0682

Saallah, Suryani and Naim, Mohd Nazli and Lenggoro, Ignatius Wuled and Mokhtar, Mohd Noriznan and Abu Bakar, Noor Fitrah and Gen, Masao (2016) Immobilisation of cyclodextrin glucanotransferase into polyvinyl alcohol (PVA) nanofibres via electrospinning. Biotechnology Reports, 10. pp. 44-48. ISSN 2215-017X

Sabo, Mahmoud Lurwan and Mariun, Norman and Hizam, Hashim and Mohd Radzi, Mohd Amran and Zakaria, Azmi (2016) Spatial energy predictions from large-scale photovoltaic power plants located in optimal sites and connected to a smart grid in Peninsular Malaysia. Renewable and Sustainable Energy Reviews, 66. pp. 79-94. ISSN 1364-0321; ESSN: 1879-0690

Sabow, A. B. and Goh, Y. M. and I., Zulkifli and Sazili, A. Q. and Kaka, U. and Kadi, M. Z. and Ebrahimi, M. and Nakyinsige, K. and Adeyemi, K. D. (2016) Blood parameters and electroencephalographic responses of goats to slaughter without stunning. Meat Science, 121. pp. 148-155. ISSN 0309-1740; ESSN: 1873-4138

Sabow, Azad Behnan and Idrus, Zulkifli and Goh, Yong Meng and Ab Kadir, Mohd Zainal Abidin and Kaka, Ubedullah and Imlan, Jurhamid Columbres and Abubakar, Ahmed Abubakar and Adeyemi, Kazeem Dauda and Sazili, Awis Qurni (2016) Bleeding efficiency, microbiological quality and oxidative stability of meat from goats subjected to slaughter without stunning in comparison with different methods of pre-slaughter electrical stunning. PLOS ONE, 11 (4). art. no. e0152661. pp. 1-18. ISSN 1932-6203

Sabow, Azad Behnan and Sazili, Awis Qurni and Aghwan, Zeiad Amjad Abdulrazzak and Idrus, Zulkifli and Goh, Yong Meng and Ab Kadir, Mohd Zainal Abidin and Khadijah, Nakyinsige and Kaka, Ubedullah and Adeyemi, Kazeem Dauda (2016) Changes of microbial spoilage, lipid-protein oxidation and physicochemical properties during post mortem refrigerated storage of goat meat. Animal Science Journal, 87 (6). pp. 816-826. ISSN 1344-3941; ESSN: 1740-0929

Sadef, Yumna and Poulsen, Tjalfe G. and Habib, Kashif and Iqbal, Tariq and Nizami, Abdul Sattar (2016) Uncertainity in degradation rates for organic micro pollutants during full - scale sewage sludge composting. Waste Management, 56. pp. 396-402. ISSN 0956-053X; ESSN: 1879-2456

Sadrolhosseini, Amir Reza and Abdul Rashid, Suraya and M. Noor, Adnan S. and Lim, Hong Ngee and Lim, Y. S. and Mahdi, Mohd. Adzir (2016) Reduced graphene oxide decorated with polypyrrole nanoparticles layer for detection of pyrene using surface plasmon resonance technique. ECS Journal of Solid State Science and Technology, 5 (2). pp. 7-12. ISSN 2162-8769; ESSN: 2162-8777

Sadrolhosseini, Amir Reza and Abdul Rashid, Suraya and Muhammad Noor, Ahmad Shukri and Kharazmi, Alireza and Lim, Hong Ngee and Mahdi, Mohd. Adzir (2016) Optical band gap and thermal diffusivity of polypyrrole-nanoparticles decorated reduced graphene oxide nanocomposite layer. Journal of Nanomaterials, 2016. art. no. 1949042. pp. 1-8. ISSN 1687-4110; ESSN: 1687-4129

Sahamijoo, Amirzubir and Piltan, Farzin and Mazloom, Mohammad Hadi and Avazpour, Mohammad Reza and Ghiasi, Hootan and Sulaiman, Nasri (2016) Methodologies of chattering attenuation in sliding mode controller. International Journal of Hybrid Information Technology, 9 (2). pp. 11-36. ISSN 1738-9968

Saifullah, M. and Yusof, Yus Aniza and Chin, Nyuk Ling and Aziz, M. G. (2016) Physicochemical and flow properties of fruit powder and their effect on the dissolution of fast dissolving fruit powder tablets. Powder Technology, 301. pp. 396-404. ISSN 0032-5910; ESSN: 1873-328X

Saifullah, M. and Yusof, Yus Aniza and Chin, Nyuk Ling and Aziz, Mohammad Gulzarul and P. Mohammed, Mohd Afandi and Abdul Aziz, Norashikin (2016) Dissolution profiling and its comparison of natural fruit powder effervescent tablets. Journal of Food Engineering, 178. pp. 60-70. ISSN 0260-8774; ESSN: 1873-5770

Salami, E. and Ganesan, P. B. and Ward, T. A. and Viyapuri, R. and Romli, F. I. (2016) Design and mechanical analysis of a 3D-printed biodegradable biomimetic micro air vehicle wing. IOP Conference Series: Materials Science and Engineering, 152 (1). pp. 1-7. ISSN 1757-899X

Saleh, Syahin and Kamaruddin, Khairul Bariah and Wan Ab. Karim Ghani, Wan Azlina and Loh, Soh Kheang (2016) Removal of organic contaminant from aqueous solution using magnetic biochar. Procedia Engineering, 148. pp. 228-235. ISSN 1877-7058

Salit, Mohd Sapuan and Wan Hussin, Wan Mohamad Haniffah and Al-Oqla, Faris M. and Yusoff, Nukman and Hoque, Md. Enamul and Sanyang, Muhammed Lamin (2016) Effects of reinforcing elements on the performance of laser transmission welding process in polymer composites: a systematic review. International Journal of Performability Engineering, 12 (6). pp. 535-550. ISSN 0973-1318

Salman, Suhad D. and Leman, Zulkiflle and H. Sultan, M. T. and Ishak, M. R. and Cardona, Francisco (2016) Effect of kenaf fibres on trauma penetration depth and ballistic impact resistance for laminated composites. Textile Research Journal, 87 (17). 2051 - 2065. ISSN 0040-5175; ESSN: 1746-7748

Salman, Suhad D. and Leman, Zulkiflle and H. Sultan, Mohamed T. and Ishak, Mohamad R. and Cardona, Francisco (2016) Ballistic impact resistance of plain woven kenaf/aramid reinforced polyvinyl butyral laminated hybrid composite. Bioresources, 11 (3). pp. 7282-7295. ISSN 1930-2126; ESSN: 1930-2126

Salman, Suhad D. and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Cardona, Francisco (2016) The effects of orientation on the mechanical and morphological properties of woven kenaf-reinforced poly vinyl butyral film. BioResources, 11 (1). pp. 1176-1188. ISSN 1930-2126

Salman, Suhad D. and Sharba, Mohaiman J. and Leman, Zulkiflle and H. Sultan, Mohamed T. and Ishak, Mohamad R. and Cardona, Francisco (2016) Tension-compression fatigue behavior of plain woven kenaf/kevlar hybrid composites. Bioresources, 11 (2). pp. 3575-3586. ISSN 1930-2126; ESSN: 1930-2126

Salman, Suhad Dawood and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Cardona, Francisco (2016) The effect of stacking sequence on tensile properties of hybrid composite materials. Malaysian Journal of Civil Engineering, 28 (spec.1). pp. 10-17. ISSN 1823-7843

Salman, Suhad Dawood and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Cardona, Francisco (2016) Influence of fiber content on mechanical and morphological properties of woven kenaf reinforced PVB film produced using a hot press technique. International Journal of Polymer Science, 2016. art. no. 7828451. pp. 1-11. ISSN 1687-9422; ESSN: 1687-9430

Samavati, Raheleh and Abdullah, Norhafizah (2016) The experimental assessment and study of ubi kayu starch as fluid loss control agent in water based drilling fluids. International Journal of Research in Chemical Engineering, 3 (1). pp. 1-6. ISSN 2345-6787

Sameen, Maher Ibrahim and Nahhas, Faten Hamed and Buraihi, Faez Hussein and Pradhan, Biswajeet and Mohamed Shariff, Abdul Rashid (2016) A refined classification approach by integrating Landsat Operational Land Imager (OLI) and RADARSAT-2 imagery for land-use and land-cover mapping in a tropical area. International Journal of Remote Sensing, 37 (10). pp. 2358-2375. ISSN 0143-1161

Sami, Mahmoud and Noordin, Nor Kamariah and Khabazian, Mehdi (2016) A TDMA-based cooperative MAC protocol for cognitive networks with opportunistic energy harvesting. IEEE Communications Letters, 20 (4). pp. 808-811. ISSN 1089-7798; ESSN: 1558-2558

Sami, Mahmoud and Noordin, Nor Kamariah and Khabazian, Mehdi and Hashim, Fazirulhisyam and Subramaniam, Shamala (2016) A survey and taxonomy on medium access control strategies for cooperative communication in wireless networks: research issues and challenges. IEEE Communications Surveys and Tutorials, 18 (4). 2493 - 2521. ISSN 1553-877X

Samsudin, Sarah Hanim and Mohd Shafri, Helmi Zulhaidi and Hamedianfar, Alireza (2016) Development of spectral indices for roofing material condition status detection using field spectroscopy and WorldView-3 data. Journal of Applied Remote Sensing, 10 (2). pp. 1-18. ISSN 1931-3195

Sanyang, Muhammed Lamin and Salit, Mohd Sapuan and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and Japar, Sahari (2016) Effect of plasticizer type and concentration on physical properties of biodegradable films based on sugar palm (arenga pinnata) starch for food packaging. Journal of Food Science and Technology, 53 (1). pp. 326-336. ISSN 0022-1155; ESSN: 0975-8402

Sanyang, Muhammed Lamin and Salit, Mohd Sapuan and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and Japar, Sahari (2016) Effect of sugar palm-derived cellulose reinforcement on the mechanical and water barrier properties of sugar palm starch of biocomposite films. BioResources, 11 (2). pp. 4134-4145. ISSN 1930-2126

Sanyang, Muhammed Lamin and Salit, Mohd Sapuan and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and Japar, Sahari (2016) Recent developments in sugar palm (Arenga pinnata) based biocomposites and their potential industrial applications: a review. Renewable and Sustainable Energy Reviews, 54. pp. 533-549. ISSN 1364-0321; ESSN: 1879-0690

Sanyang, Muhammed Lamin and Wan Ab. Karim Ghani, Wan Azlina and Idris, Azni and Ahmad @ Ayob, Mansor (2016) Hydrogel biochar composite for arsenic removal from wastewater. Desalination and Water Treatment, 57 (8). pp. 3674-3688. ISSN 1944-3994; ESSN: 1944-3986

Sarifudin, Jumardi and Mohd Shah, Mohd Kamal and Jaapar, Sahari and Salit, Mohd Sapuan (2016) Experimental analysis tapioca starch reinforced alumina nanoparticle (Al2O3) composite. Journal of Built Environment, Technology and Engineering, 1. pp. 181-195. ISSN 0128-1003

Seyedzadeh, Saleh and Moghaddasi, Majid and A. Anas, Siti B. (2016) Variable - weight optical code division multiple access system using different detection schemes. Journal of Telecommunications and Information Technology, 3 (50). pp. 50-59. ISSN 1509-4553

Shabdin, Muhammad Kashfi and Mohamed Shariff, Abdul Rashid and Johari, Mohd Nazrul Azlan and Saat, Nor Kamilah and Abbas, Zulkifly (2016) A study on the oil palm fresh fruit bunch (FFB) ripeness detection by using Hue, Saturation and Intensity (HSI) approach. IOP Conference Series Earth and Environmental Science, 37 (012039). pp. 1-11. ISSN 1755-1307; ESSN: 1755-1315

Shahi, Kaveh and Mohd Shafri, Helmi Zulhaidi and Hamedianfar, Alireza (2016) Road condition assessment by OBIA and feature selection techniques using very high-resolution WorldView-2 imagery. Geocarto International, 32 (12). 1389 - 1406. ISSN 1010-6049; ESSN: 1752-0762

Shahzad, Khurram and Cucek, Lidija and Sagir, Muhammad and Nizami, Abdul-Sattar and Iqbal, Tariq and Almeelbi, Talal and Ismail, Iqbal M. I. (2016) A case study for developing eco-efficient street lighting system in Saudi Arabia. Chemical Engineering Transactions, 52. pp. 1141-1146. ISSN 2283-9216

Shaikh, Irfan Ahmed and Lee, Teang Shui (2016) Estimating earthen tertiary water channel seepage losses as a function of soil texture. Journal of Hydrologic Engineering, 21 (2). art. no. 06015012. ISSN 1084-0699; ESSN: 1943-5584

Shams, Shahriar and Ahsan, Amimul and Al-Mamun, Abdullah and Arunkumar, Thirugnanasambantham (2016) Physical risk assessment for urban water supply in a developing country: a case of Mega City Dhaka. Engineering Journal, 20 (3). pp. 23-31. ISSN 0125-8281

Shamshiri, Ramin and Che Man, Hasfalina and Zakaria, Abd Jamil and Beveren, Peter van and Wan Ismail, Wan Ishak and Ahmad, Desa (2016) Membership function model for defining optimality of vapor pressure deficit in closed-field cultivation of tomato. Acta Horticulturae, 1152. 281 - 290. ISSN 0567-7572

Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Mohamed Ariff, Azmah Hanim (2016) Effects of Kenaf Fiber Orientation on Mechanical Properties and fatigue Life of Glass/Kenaf Hybrid Composites. BioResources, 11 (1). pp. 1448-1465. ISSN 1930-2126

Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Mohamed Ariff, Azmah Hanim (2016) Partial replacement of glass fiber by woven kenaf in hybrid composites and its effect on monotonic and fatigue properties. Bioresources, 11 (1). pp. 2665-2883. ISSN 1930-2126

Sharba, Mohaiman Jaffar and Salman, Suhad Dawood and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Mohamed Ariff, Azmah Hanim (2016) Effects of processing method, moisture content, and resin system on physical and mechanical properties of woven kenaf plant fiber composites. BioResources, 11 (1). pp. 1466-1476. ISSN 1930-2126

Shishir, Mohammad Rezaul Islam and Taip, Farah Saleena and Ab. Aziz, Norashikin and A. Talib, Rosnita and Sarker, Md. Sazzat Hossain (2016) Optimization of spray drying parameters for pink guava powder using RSM. Food Science and Biotechnology, 25 (2). pp. 461-468. ISSN 1226-7708; ESSN: 2092-6456

Shojaei, Taha Roodbar and Mohd Salleh, Mohamad Amran and Sijam, Kamaruzaman and Abdul Rahim, Raha and Mohsenifar, Afshin and Safarnejad, Reza and Tabatabaei, Meisam (2016) Detection of Citrus tristeza virus by using fluorescence resonance energy transfer-based biosensor. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 169. pp. 216-222. ISSN 1386-1425; ESSN: 1873-3557

Shojaei, Taha Roodbar and Mohd Salleh, Mohamad Amran and Sijam, Kamaruzaman and Abdul Rahim, Raha and Mohsenifar, Afshin and Safarnejad, Reza and Tabatabaei, Meisam (2016) Fluorometric immunoassay for detecting the plant virus Citrus tristeza using carbon nanoparticles acting as quenchers and antibodies labeled with CdTe quantum dots. Microchimica Acta, 183 (7/July). pp. 2277-2287. ISSN 0026-3672; ESSN:1436-5073

Shojanoori, Razieh and M. Shafri, Helmi Z. (2016) Review on the use of remote sensing for urban forest monitoring. Arboriculture & Urban Forestry, 42 (6). pp. 400-417. ISSN 1935-5297; ESSN: 2155-0778

Shu, Hui Gan and Sze, Pheng Ong and Nyuk, Ling Chin and Chung, Lim Law (2016) Color changes, nitrite content, and rehydration capacity of edible bird's nest by advanced drying method. Drying Technology, 34 (11). pp. 1330-1342. ISSN 0737-3937; ESSN: 1532-2300

Siow, Chun Lim and Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin (2016) Behaviour of a new material that improves ufer grounding practice. Journal of Electrical Systems, 12 (2). pp. 291-300. ISSN 1112-5209

Siyahghalati, Sajad and Saraf, Arun Kumar and Pradhan, Biswajeet and Jebur, Mustafa Neamah and Tehrany, Mahyat Shafapour (2016) Rule-based semi-automated approach for detection of landslides induced by 18 September 2011 Sikkim, Himalaya, earthquake using IRS LISS3 satellite images. Geomatics, Natural Hazards and Risk, 7 (1). pp. 326-344. ISSN 1947-5705; ESSN: 1947-5713

Soltani, Soroush and Rashid, Umer and Yunus, Robiah and Yap, Taufiq Yun Hin (2016) Biodiesel production in the presence of sulfonated mesoporous ZnAl2O4 catalyst via esterification of palm fatty acid distillate (PFAD). Fuel, 178. pp. 253-262. ISSN 0016-2361; ESSN: 1873-7153

Soltani, Soroush and Rashid, Umer and Yunus, Robiah and Yap, Taufiq Yun Hin and Al-Resayes, Saud Ibrahim (2016) Post-functionalization of polymeric mesoporous C@Zn coreeshell spheres used for methyl ester production. Renewable Energy, 99. pp. 1235-1243. ISSN 0960-1481; ESSN: 1879-0682

Sowndhararajan, Kandhasamy and Chin, Nyuk Ling and Yusof, Yus Aniza and Lai, Lee Ling and Wan Mustapha, Wan Aida (2016) Effect of blender and blending time on color and aroma characteristics of juice and its freeze-dried powder of Pandanus amaryllifolius Roxb. leaves (pandan). International Journal of Food Engineering, 12 (1). pp. 75-81. ISSN 2194-5764; ESSN: 1556-3758

Sukindar, Nor Aiman and Ariffin, M. K. A. and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Analyzing the effect of nozzle diameter in fused deposition modeling for extruding polylactic acid using open source 3D printing. Jurnal Teknologi, 78 (10). pp. 7-15. ISSN 0127–9696; ESSN: 2180–3722

Sulaiman, Alifdalino and Farid, Mohammed and Silva, Filipa V.M. (2016) Quality stability and sensory of apple juice processed by thermosonication, pulsed electric field and thermal processing. Food Science and Technology International, 23 (3). pp. 265-276. ISSN 1082-0132; ESSN: 1532-1738

Sulaiman, Norliana (2016) Critical review of ground-borne vibration and impact assessment: principles, measurement and modelling. Pertanika Journal of Scholarly Research Reviews, 2 (1). pp. 22-31. ISSN 2462-2028

Sulaiman, Safwan and Mokhtar, Mohd Noriznan and Naim, Mohd Nazli and Samsu Baharuddin, Azhari and Mohd Salleh, Mohamad Amran and Sulaiman, Alawi (2016) Development of cellulose nanofibre (CNF) derived from kenaf bast fibre and it's potential in enzyme immobilization support. Malaysian Journal of Analytical Sciences, 20 (2). pp. 309-317. ISSN 1394-2506

Suleiman, Samaila and Wan Ismail, Wan Ishak and Mahadi @ Othman, Muhammad Razif and Mohd Kassim, Muhamad Saufi (2016) Performance of mechanical weeding levels on yield and vegetative component of rice under the system of rice intensification (SRI) at Tanjung Karang irrigation scheme, Malaysia. Academic Research International, 7 (3). pp. 62-72. ISSN 2223-9944; ESSN: 2223-9553

Suleiman, Samaila and Wan Ismail, Wan Ishak and Mohd Kassim, Muhamad Saufi (2016) The system of rice intensification (SRI) practices and mechanization needs. Asian Journal of Agricultural Sciences, 8 (3). pp. 10-17. ISSN 2041-3882; ESSN: 2041-3890

Suleiman @ Ahmad, Muhammad Jabir and Johari, Nurhaslina and Ahmad, Mohamad Azmirruddin and Ibrahim, Rosdi and Abu Talib, Abd. Rahim and Harmin, Mohammad Yazdi (2016) Solvent debinding of Inconel 718 fabricated via Metal Injection Molding. Advanced Materials Research, 1133. pp. 275-279. ISSN 1022-6680; ESSN: 1662-8985

Sutrisno, Imam and Jami'in, Mohammad Abu and Hu, Jinglu and Marhaban, Mohammad Hamiruce (2016) A self-organizing quasi-linear ARX RBFN model for nonlinear dynamical systems identification. SICE Journal of Control, Measurement, and System Integration, 9 (2). pp. 70-77. ISSN 1882-4889; ESSN: 1884-9970

Syed Abdullah, Sharifah Soplah and Shirai, Yoshihito and Mohd Ali, Ahmad Amiruddin and Mustapha, Mahfuzah and Hassan, Mohd Ali (2016) Case study: preliminary assessment of integrated palm biomass biorefinery for bioethanol production utilizing non-food sugars from oil palm frond petiole. Energy Conversion and Management, 108. pp. 233-242. ISSN 0196-8904; ESSN: 1879-2227

Syed Mohamed, Muhammad Syafiq and Mohd Tamrin, Shamsul Bahri and Abdul Rahman, Ahmad Rizal and Mat Said, Aini and Abdul Jalil, Nawal Aswan (2016) Integrating usability in automotive navigation user interface design via Kansei Engineering. Modern Applied Science, 10 (7). pp. 208-216. ISSN 1913-1844; ESSN: 1913-1852

Tadda, M. A. and Ahsan, A. and Shitu, A. and ElSergany, M. and Arunkumar, T. and Jose, Bipin and Razzaque, M. Abdur and Nik Daud, N. N. (2016) A review on activated carbon: process, application and prospects. Journal of Advanced Civil Engineering Practice and Research, 2 (1). pp. 7-13. ISSN ESSN: 2550-1933

Taghizadegan, Ali and Piltan, Farzin and Sulaiman, Nasri B. (2016) Design high frequency surgical robot controller: design FPGA-based controller for surgical robot manipulator simscape modeling. International Journal of Hybrid Information Technology, 9 (5). pp. 431-474. ISSN 1738-9968

Talalah Ramli, Nurul Infaza and Abdul Rashid, Suraya and Sulaiman, Yusran and Mamat, Md Shuhazlly and Mohd Zobir, Syazwan Afif and Krishnan, Shutesh (2016) Physicochemical and electrochemical properties of carbon nanotube/graphite nanofiber hybrid nanocomposites for supercapacitor. Journal of Power Sources, 328. pp. 195-202. ISSN 0378-7753; ESSN: 1873-2755

Tam, S. W. and Walvekar, Rashmi Gangasa and Rashidi, Saba and Abdullah, Luqman Chuah and Siddiqui, Mohammad Khalid (2016) Stability and characterization of CNT nanofluids using polyvinyl alcohol dispersant. Journal of Engineering Science and Technology, 11 (spec. Feb.). pp. 1-15. ISSN 1823-4690

Tamma, K. K. and Masuri, Siti Ujila (2016) A novel extension of GS4-1 time integrator to fluid dynamics type non-linear problems with illustrations to Burgers' equation. International Journal of Numerical Methods for Heat & Fluid Flow, 26 (6). pp. 1634-1660. ISSN 0961-5539; ESSN: 1758-6585

Tan, Kean Sheng and Wong, Shaw Voon and Megat Ahmad, Megat Mohamad Hamdan (2016) Computational simulation of frontal impact of motorcycle telescopic fork. International Journal of Crashworthiness, 21 (2). pp. 161-172. ISSN 1358-8265; ESSN: 1754-2111

Tan, Mei Ching and Chin, Nyuk Ling and Yusof, Yus Aniza and Abdullah, Jaafar (2016) Effect of high power ultrasonic treatment on whey protein foaming quality. International Journal of Food Science & Technology, 51 (3). pp. 617-624. ISSN 0950-5423; ESSN: 1365-2621

Tan, Mei Ching and Chin, Nyuk Ling and Yusof, Yus Aniza and Abdullah, Jaafar (2016) Novel 2D and 3D imaging of internal aerated structure of ultrasonically treated foams and cakes using X-ray tomography and X-ray microtomography. Journal of Food Engineering, 183. pp. 9-15. ISSN 0260-8774; ESSN: 1873-5770

Tan, S. B. and Shamsudin, Rosnah and Mohammed, M. A. and Rahman, N. A. (2016) Effect of mixing period, water and sugar on the sesame cracker dough stickiness. International Food Research Journal, 23 (suppl.). S249-S254. ISSN 1985-4668; ESSN: 2231-7546

Tarmidi, Mohammad Zakri and Mohamed Shariff, Abdul Rashid and Mahmud, Ahmad Rodzi and Zaiton Ibrahim, Zelina and Hamzah, Abdul Halim (2016) Spatial data sharing implementation in Malaysia's marine organisations: a case study. Journal of Spatial Science, 61 (1). pp. 209-216. ISSN 1449-8596; ESSN: 1836-5655

Tayebiyan, Aida and Mohammad, Thamer Ahmad and Ghazali, Abdul Halim and Abdul Malek, Marlinda and Mashohor, Syamsiah (2016) Potential impacts of climate change on precipitation and temperature at Jor Dam Lake. Pertanika Journal of Science & Technology, 24 (1). pp. 213-224. ISSN 0128-7680; ESSN: 2231-8526

Tayebiyan, Aida and Mohammad, Thamer Ahmad and Ghazali, Abdul Halim and Mashohor, Syamsiah (2016) Artificial neural network for modelling rainfall-runoff. Pertanika Journal of Science & Technology, 24 (2). pp. 319-330. ISSN 0128-7680; ESSN: 2231-8526

Tayebiyan, Aida and Mohammed Ali, Thamer Ahmed and Ghazali, Abdul Halim and Abdul Malek, Marlinda (2016) Optimization of exclusive release policies for hydropower reservoir operation by using genetic algorithm. Water Resources Management, 30 (3). pp. 1203-1216. ISSN 0920-4741; ESSN: 1573-1650

Tee, Yee Bond and A. Talib, Rosnita and Abdan, Khalina and Chin, Nyuk Ling and Kadir Basha, Roseliza and Md. Yunos, Khairul Faezah (2016) Comparative study of chemical, mechanical, thermal and barrier properties of poly(lactic acid) plasticized with epoxidized soybean oil and epoxidized palm oil. BioResources, 11 (1). pp. 1518-1540. ISSN 1930-2126

Tee, Yee Bond and Wong, Jiafei and Tan, Mei Ching and A. Talib, Rosnita (2016) Development of edible film from flaxseed mucilage. BioResources, 11 (4). pp. 10286-10295. ISSN 1930-2126

Teoh, Lishing and Lasekan, Ola and Mohd Adzahan, Noranizan and Hashim, Norhashila (2016) The effect of combinations of UV-C exposure with ascorbate and calcium chloride dips on the enzymatic activities and total phenolic content of minimally processed yam slices. Postharvest Biology and Technology, 120. pp. 138-144. ISSN 0925-5214; ESSN: 1873-2356

Thien, Yee Von and Azis, Norhafiz and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Yunus, Robiah and Ishak, Mohd Taufiq and Yaakub, Zaini (2016) Evaluation on the lightning breakdown voltages of palm oil and coconut oil under non-uniform field at small gap distances. Journal of Electrical Engineering and Technology, 11 (1). pp. 184-191. ISSN 1975-0102; ESSN: 2093-7423

Thirugnanasambantham, Arunkumar and Velraj, Ramalingam and Denkenberger, David C. and Sathyamurthy, Ravishankar and Kumar, K. Vinoth and Ahsan, Amimul (2016) Productivity enhancements of compound parabolic concentrator tubular solar stills. Renewable Energy, 88. pp. 391-400. ISSN 0960-1481; ESSN: 1879-0682

Toozandehjani, Meysam and Mustapha, Faizal and Ariffin, Mohd Khairol Anuar and Zahari, Nur Ismarrubie and Matori, Khamirul Amin and Ostovan, Farhad and Fadaeifard, Firouz (2016) Effect of artificial aging on the microstructure and mechanical properties of aluminum alloy AA6061-T6. Metal Science and Heat Treatment, 58 (5-6). pp. 283-286. ISSN 0026-0673; ESSN: 1573-8973

Umar, Idris Abubakar and Mohd Hanapi, Zurina and Sali, A. and A. Zulkarnain, Zuriati (2016) FuGeF: a resource bound secure forwarding protocol for wireless sensor networks. Sensors, 16 (6). art. no. 943. pp. 1-20. ISSN 1424-8220

Usman, Hamza and Abu Bakar, Muhammad Hafiz and Amir Hamzah, Amir Syahir and Salleh, Abu Bakar (2016) A tapered fibre optics biosensor for histamine detection. Sensor Review, 36 (1). pp. 40-47. ISSN 0260-2288

Vaghei, Ramin and Hejazi, Farzad and Taheri, Hafez and Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah (2016) A new precast wall connection subjected to monotonic loading. Computers and Concrete, 17 (1). pp. 1-27. ISSN 1598-8198; ESSN: 1598-818X

Velu, Vengadeshwaran and Mariun, Norman and Mohd Radzi, Mohd Amran and Mailah, Nashiren Farzilah (2016) Realization of single phase to three phase matrix converter using SVPWM algorithm. Automatika, 57 (1). pp. 129-140. ISSN 0005-1144; ESSN: 1848-3380

Warid, Warid and Hizam, Hashim and Mariun, Norman and Abdul Wahab, Noor Izzri (2016) Optimal power flow using the Jaya algorithm. Energies, 9 (9). pp. 1-18. ISSN 1996-1073; ESSN: 1996-1073

Warid, Warid Sayel and Hizam, Hashim and Mariun, Norman and Abdul Wahab, Noor Izzri (2016) Mapping of optimum placement of distributed generation in meshed power networks with appropriate technologies. World Journal of Engineering, 13 (4). pp. 317-325. ISSN 1708-5284

Warid Warid, and Hizam, Hashim and Mariun, Norman and Abdul Wahab, Noor Izzri (2016) An efficacious multi-objective fuzzy linear programming approach for optimal power flow considering distributed generation. PLOS ONE, 11 (3). art. no. e0149589. pp. 1-30. ISSN 1932-6203

Yadegar, Sanaz and Che Soh, Azura and Ahmad, Siti Anom and Ishak, Asnor Juraiza (2016) New methodology of online sliding surface slope tuning PID like fuzzy sliding mode controller for robust control of robot manipulators. International Journal of Control Theory and Application, 9 (5). pp. 2651-2675. ISSN 0974-5572

Yahaya, R. and Salit, Mohd Sapuan and Jawaid, Mohammad and Leman, Zulkifle and Zainudin, Edi Syams (2016) Measurement of ballistic impact properties of woven kenaf–aramid hybrid composites. Measurement, 77. pp. 335-343. ISSN 0263-2241; ESSN: 1873-412X

Yahaya, Ridwan and Salit, Mohd Sapuan and Jawaid, Mohammad and Leman, Zulkiflle and Zainudin, Edi Syams (2016) Effect of fibre orientations on the mechanical properties of kenaf–aramid hybrid composites for spall-liner application. Defence Technology, 12 (1). pp. 52-58. ISSN 2214-9147

Yahaya, Ridwan and Salit, Mohd Sapuan and Jawaid, Mohammad and Leman, Zulkiflle and Zainudin, Edi Syams (2016) Investigating ballistic impact properties of woven kenaf-aramid hybrid composites. Fibers and Polymers, 17 (2). pp. 275-281. ISSN 1229-9197; ESSN: 1875-0052

Yahaya, Ridwan and Salit, Mohd Sapuan and Jawaid, Mohammad and Zainudin, Edi Syams (2016) Water absorption behaviour and impact strength of kenaf-Kevlar reinforced epoxy hybrid composites. Advanced Composites Letters, 25 (4). pp. 98-102. ISSN 0963-6935

Yam, Lai Wai and Lim, Lishan and Hosseini, Soraya and Choong, Thomas Shean Yaw (2016) Enhancement of phenol adsorption on mesoporous carbon monolith modified by NaOH and NH3: equilibrium and kinetic studies. Desalination and Water Treatment, 57 (9). pp. 4183-4193. ISSN 1944-3994; ESSN: 1944-3986

Yap, Hoon and Mohd Radzi, Mohd Amran and Hassan, Mohd Khair and Mailah, Nashiren Farzilah (2016) DC-link capacitor voltage regulation for three-phase three-level inverter-based shunt active power filter with inverted error deviation control. Energies, 9 (7). pp. 1-25. ISSN 1996-1073

Yassoralipour, Ali and Bakar, Jamilah and Abdul Rahman, Russly and Abu Bakar, Fatimah (2016) Physicochemical properties, microbial profile, and biogenic amines content of barramundi (Lates calcarifer Bloch) fillets wrapped in selected packaging films under modified atmosphere packaging. International Journal of Food Properties, 19 (12). pp. 2707-2717. ISSN 1094-2912; ESSN: 1532-2386

Yin, Hui Chow and Yee, Jiun Yap and Pau, Loke Show and Joon, Ching Juan and Anuar, Mohd Shamsul and Ng, Eng-Poh and Ooi, Chien-Wei and Tau, Chuan Ling (2016) Characterization of partitioning behaviors of immunoglobulin G in polymer-salt aqueous two-phase systems. Journal of Bioscience and Bioengineering, 122 (5). pp. 613-619. ISSN 1389-1723; ESSN: 1347-4421

Yousif, Siba Monther and M. Sidek, Roslina and Mekki, Anwer Sabah and Sulaiman, Nasri and Varahram, Pooria (2016) Efficient low-complexity digital predistortion for power amplifier linearization. International Journal of Electrical and Computer Engineering, 6 (3). pp. 1096-1105. ISSN 2088-8708

Youssef, Ahmed M. and Al-Kathery, Mohamed and Pradhan, Biswajeet and El-Sahly, Turki (2016) Debris flow impact assessment along the Al-Raith Road, Kingdom of Saudi Arabia, using remote sensing data and field investigations. Geomatics, Natural Hazards and Risk, 7 (2). pp. 620-638. ISSN 1947-5705; ESSN: 1947-5713

Youssef, Ahmed M. and Pradhan, Biswajeet and Sefry, Saleh A. (2016) Flash flood susceptibility assessment in Jeddah city (Kingdom of Saudi Arabia) using bivariate and multivariate statistical models. Environmental Earth Sciences, 75 (12). pp. 1-16. ISSN 1866-6280; ESSN: 1866-6299

Youssef, Ahmed M. and Sefry, Saleh A. and Pradhan, Biswajeet and Alfadail, Emad Abu (2016) Analysis on causes of flash flood in Jeddah city (Kingdom of Saudi Arabia) of 2009 and 2011 using multi-sensor remote sensing data and GIS. Geomatics, Natural Hazards and Risk, 7 (3). pp. 1018-1042. ISSN 1947-5705; ESSN: 1947-5713

Yusof, N. F. and Mohamed Zawawi, M. A. and Juahir, H. and Karim, N. Z. (2016) Application of geophysical technique in investigation of groundwater quality at Melaka Tengah, Malacca. Journal of Advanced Research Design, 24 (1). pp. 1-12. ISSN 2289-7984

Zainal Abidin, Zurina and Mohamad, Wan Noraznorin and Samadi, Mahtab (2016) Optimization of chlorophyll extraction from Gynura Procumbens. Malaysian Journal of Analytical Sciences, 20 (6). pp. 1421-1428. ISSN 1394-2506

Zainal Abidin, Zurina and Omar, Fatin Nordalila and Awang Biak, Dayang Radiah and Che Man, Yaakob (2016) Alternative for rapid detection and screening of pork, chicken, and beef using dielectric properties in the frequency of 0.5 to 50 GHz. International Journal of Food Properties, 19 (5). pp. 1127-1138. ISSN 1094-2912; ESSN: 1532-2386

Zainol Abidin, Nadiah and Abu Bakar, Muhammad Hafiz and Tamchek, Nizam and Mahamd Adikan, Faisal Rafiq and Mahdi, Mohd Adzir (2016) Reflectivity variation in asymmetric random distributed feedback Raman fiber laser. Laser Physics, 26 (1). art. no. 015105. ISSN 1054-660X; ESSN: 1555-6611

Zainol Abidin, Nadiah Husseini and Abu Bakar, Muhammad Hafiz and Tamchek, Nizam and Mahamd Adikan, Faisal Rafiq and Mahdi, Mohd Adzir (2016) Reflectivity variation in asymmetric random distributed feedback Raman fiber laser. Laser Physics, 26 (1). art. no. 015105. pp. 1-7. ISSN 1054-660X; ESSN: 1555-6611

Zainol Abidin, Nadiah Husseini and Abu Bakar, Muhammad Hafiz and Tamchek, Nizam and Mahdi, Mohd Adzir (2016) Tunable ultra-long random distributed feedback fiber laser. Jurnal Teknologi (Sciences and Engineering), 78 (3). pp. 123-127. ISSN 0127-9696; ESSN: 2180-3722

Zainul Abidin, Nur Sofuwani and Hussain, Siti Aslina and Mustapa Kamal, Siti Mazlina (2016) Separation of lactose from raw goat's milk by cross-flow hollow fiber ultrafiltration membrane. International Food Research Journal, 23 (suppl.). S209-S219. ISSN 1985-4668; ESSN: 2231-7546

Zakaria, Mohamad Shukri and Ismail, Farzad and Tamagawa, Masaaki and Abdul Aziz, Ahmad Fazli and Wiriadidjaja, Surjatin and Basri, Adi Azriff and Ahmad, Kamarul Arifin (2016) Numerical analysis using a fixed grid method for cardiovascular flow application. Journal of Medical Imaging and Health Informatics, 6 (6). pp. 1483-1488. ISSN 2156-7018; ESSN: 2156-7026

Zakaria, Siti Maisurah and Mustapa Kamal, Siti Mazlina (2016) Subcritical water extraction of bioactive compounds from plants and algae: applications in pharmaceutical and food ingredients. Food Engineering Reviews, 8 (1). pp. 23-34. ISSN 1866-7910; ESSN: 1866-7929

Zakaria @ Mamat, Mohd Rafein and Hirata, Satoshi and Fujimoto, Shinji and Ibrahim, Izzudin and Hassan, Mohd Ali (2016) Soluble inhibitors generated during hydrothermal pretreatment of oil palm mesocarp fiber suppressed the catalytic activity of Acremonium cellulase. Bioresource Technology, 200. pp. 541-547. ISSN 0960-8524; ESSN: 1873-2976

Zin, M. H. and Razzi, M. F. and Othman, S. and Liew, K. and Abdan, K. and Mazlan, N. (2016) A review on the fabrication method of bio-sourced hybrid composites for aerospace and automotive applications. IOP Conference Series: Materials Science and Engineering, 152 (1). pp. 1-13. ISSN 1757-899X

Zolfaghari, Reza and Fakhru’l-Razi, Ahmadun and Abdullah, Luqman C. and Elnashaie, Said S. E. H. and Pendashteh, Alireza (2016) Demulsification techniques of water-in-oil and oil-in-water emulsions in petroleum industry. Separation and Purification Technology, 170. pp. 377-407. ISSN 1383-5866; ESSN: 1873-3794

Zolfagharnassab, Shahrzad and Vong, C. N. and Mohamed Shariff, Abdul Rashid and Ehsani, Reza and Jaafar, Hawa Z. E. and Aris, Ishak (2016) Comparison of mean temperature taken between commercial and prototype thermal sensor in estimating mean temperature of oil palm fresh fruit bunches. International Food Research Journal, 23 (suppl.). S91-S95. ISSN 1985-4668; ESSN: 2231-7546

Zulkafli, Zed Diyana and Buytaert, Wouter and Manz, Bastian and Rosas, Claudia Veliz and Willems, Patrick and Lavado-Casimiro, Waldo and Guyot, Jean-Loup and Santini, William (2016) Projected increases in the annual flood pulse of the Western Amazon. Environmental Research Letters, 11 (1). art. no. 014013. pp. 1-9. ISSN 1748-9326

Zulkifli, N. and Hashim, Norhashila and Abdan, Khalina and Hanafi, M. (2016) Evaluation of physicochemical properties of Musa acuminate cv. Berangan at different ripening stages. International Food Research Journal, 23 (suppl.). S97-S100. ISSN 1985-4668; ESSN: 2231-7546

Book Section

Ghamarian, Nima and Mohd Ariff, Azmah Hanim and Penjumras, Patpen and Abang Abdul Majid, Dayang Laila (2016) Effect of fiber orientation on the mechanical properties of laminated polymer composites. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Amsterdam. ISBN 9780128035818

Ishak, Asnor Juraiza (2016) Motion stabiliser. In: Nature's Yield and Wonders of Art (NYAWA)16: Brain. Universiti Putra Malaysia Press, Serdang, Selangor, pp. 68-71. ISBN 9789679604153

Khaksar, Weria and Mohamed Sahari, Khairul Salleh and Tang, Sai Hong (2016) Application of sampling-based motion planning algorithms in autonomous vehicle navigation. In: Autonomous Vehicle. IntechOpen, London, United Kingdom, pp. 21-38. ISBN 9789535125846; EISBN: 9789535157892

Kiani, Golnar and Ibrahim, Rahinah and Abdan, Khalina and Abdul Aziz, Farah and Abdul Aziz, Faieza (2016) Simulated selective laser sintering of KCRP for students' creativity. In: STEdex 15/16: Sustainable Tropical Environmental Design Exhibition. Universiti Putra Malaysia Press, Serdang, Selangor, pp. 134-135.

Mazlan, Norkhairunnisa and Abang Abdul Majid, Dayang Laila (2016) A review on thermal performance of hybrid natural fiber/nanoclay polymer composites. In: Nanoclay Reinforced Polymer Composites. Engineering Materials . Springer, Singapore, 151 - 174. ISBN 9789811009495; EISBN: 9789811009501

Md Saifullah and Ahsan, Amimul and Shishir, Mohammad Rezaul Islam (2016) Production, stability and application of micro- and nanoemulsion in food production and the food processing industry. In: Emulsions. Elsevier, Switzerland, pp. 405-442. ISBN 9780128043066

Mohd Isa, Maryam and Saripan, M. Iqbal and Wan Hasan, Wan Zuha and Ahadi, Mojtaba (2016) Cancer sensor. In: Nature's Yield and Wonders of Art (NYAWA)16: Brain. Universiti Putra Malaysia Press, Serdang, Selangor, pp. 72-75. ISBN 9789679604153

Mohd. Yusuff, Rosnah and Kamarudin, Nor Hafeezah and Kamal Ariffin, Ariff Mubarak and Ahmad, Siti Anom and Mohd. Soom, Mohd. Amin (2016) Physiological analysis of stoop lifting based on heart rate for the Malaysian population. In: Advances in Physical Ergonomics and Human Factors. Springer, Switzerland, pp. 829-838. ISBN 9783319416939; EISBN: 9783319416946

Ooi, Jonathan Shi Khai and Ahmad, Siti Anom (2016) Driving emotions. In: Nature's Yield and Wonders of Art (NYAWA)16: Brain. Universiti Putra Malaysia Press, Serdang, Selangor, pp. 76-79. ISBN 9789679604153

Othman, Mohammad Lutfi and Aris, Ishak and Ananthapadmanabha, Thammaiah (2016) Novel rule base development from IED-resident big data for protective relay analysis expert system. In: Big Data on Real-World Applications. InTech, Rijeka, Croatia, pp. 1-22. ISBN 9789535124894

Salit, Mohd Sapuan and Yusoff, Nukman and Tamrin, Khairul Fikri and El - Shekeil, Yousuf (2016) Natural fiber-reinforced composites: types, development, manufacturing process, and measurement. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford. ISBN 9780128035818

Sayuti, M. and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar (2016) Metal matrix composite products by vibration casting method. In: Reference Module in Marerials Science and Material Engineering. Elsevier, United Kingdom, pp. 1-29. ISBN 9780128035818

Wan Hasan, Wan Zuha (2016) Intelligent neuro-system solution. In: Nature's Yield and Wonders of Art (NYAWA)16: Brain. Universiti Putra Malaysia Press, Serdang, Selangor, pp. 66-67. ISBN 9789679604153

Wan Hasan, Wan Zuha and Hussien, Omar and Sabry, Ali and Mohamad Ghazali, Aina Mardhiyah (2016) Can your foot function as a brain? In: Nature's Yield and Wonders of Art (NYAWA)16: Brain. Universiti Putra Malaysia Press, Serdang, Selangor, pp. 80-83. ISBN 9789679604153

Conference or Workshop Item

A. B., Fatin Nur Lyana and Omar, Rozita and Harun, M. R. and Wan Ab. Karim Ghani, Wan Azlina and Idris, A. (2016) Flocculation of algae Chlorella vulgaris using AFlok-BP1 and aluminum sulfate (Alum). In: 13th Universiti Malaysia Terengganu International Annual Symposium on Sustainability Science and Management (UMTAS 2016), 13-15 Dec. 2016, Primula Beach Hotel, Kuala Terengganu. (pp. 164-170).

Abbas, Nidaa Hasan and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Ramli, Abdul Rahman and Parveen, Sajida (2016) A multi-purpose watermarking scheme based on hybrid of lifting wavelet transform and Arnold transform. In: 2016 Al-Sadeq International Conference on Multidisciplinary in IT and Communication Science and Applications (AIC-MITCSA), 9-10 May 2016, Baghdad, Iraq. .

Abd Rahman, Muhammad Syahmi and Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Jasni, Jasronita and Jamaludin, Farah Adilah (2016) Evaluation of electromagnetic fields on polluted polymer insulator under lightning impulse current. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Abdalla, Ayad Omran and Amrin, Astuty and Muhamad, Sallehuddin and Mohamed Ariff, Azmah Hanim (2016) Effect of heat treatment parameters on the microstructure and microhardness of Ti-6Al-4V alloy. In: 3rd International Conference of Global Network for Innovative Technology 2016 (IGNITE 2016), 27-29 Jan. 2016, Penang, Malaysia. (pp. 1-5).

Abdullah, Ahmad Fikri and Vojinovic, Zoran and Meesuk, Vorawit (2016) Modeling flood disasters: issues concerning data for 2D numerical models. In: International Symposium on Civil and Environmental Engineering 2016 (ISCEE 2016), 5-6 Dec. 2016, Novotel Melaka, Melaka, Malaysia. (pp. 1-8).

Ahmad, Nor Izzati and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Zaini, Nur Hazirah and Mohd Radzi, Mohd Amran and Azis, Norhafiz and Wan Hasan, Wan Zuha (2016) On the performance of a polycrystalline PV panel under different impulse voltages and temperatures. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Ahmad, Norhayati and Saripan, M. Iqbal and Marhaban, Mohammad Hamiruce and Rokhani, Fakhrul Zaman and Mohd Saad, Wira Hidayat (2016) Determining the ultrasound time of response using FPGA-based electronics read-out. In: 2016 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 4-8 Dec. 2016, Kuala Lumpur, Malaysia. (pp. 769-773).

Ahmad, Siti Azfanizam and Mazli, Muhammad Nur Ikhwan and Mohd Ariffin, Mohd Khairol Anuar (2016) A mechanical design of power generator using door openings for household use. In: 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES 2016), 14-16 Nov. 2016, Putrajaya, Malaysia. (pp. 283-288).

Ahmad, So'bah and Anuar, Mohd Shamsul and Taip, Farah Saleena and Shamsudin, Rosnah (2016) Optimization of fat yield from rambutan (Nephelium lappaceum L.) seed under convective drying. In: Postgraduate Symposium on Green Engineering and Technology 2016 (PSGET 2016), 7 Nov. 2016, Malacca International Trade Centre. (pp. 1-11).

Aiyelabowo, Peter O. and Sali, Aduwati and Mohd Noor, Samsul Bahari and Noordin, Nor Kamariah (2016) Selective relaying for reliability in power line cooperative communication system. In: 2016 International Conference on Wireless Networks and Mobile Communications (WINCOM), 26-29 Oct. 2016, Fez, Morocco. (pp. 1-8).

Al Khanjar, Karrar Naji Salman and Ismail, Alyani and Raja Abdullah, Raja Syamsul Azmir and Alhawari, Adam Reda Hasan (2016) Low cost coplanar UHF RFID tag antenna using U-shaped feeder for metallic applications. In: 2016 IEEE International Conference on RFID Technology and Applications (RFID-TA), 21-23 Sept. 2016, Foshan, China. (pp. 25-28).

Al Mentefik, Athraa Iessa Shaaban and Abdul Wahab, Noor Izzri and Mariun, Norman and Hizam, Hashim (2016) Method of estimating the maximum penetration level of wind power using transient frequency deviation index based on COI frequency. In: 2016 IEEE 6th International Conference on Power and Energy (PECON2016), 28-29 Nov. 2016, Melaka, Malaysia. (pp. 274-279).

Al-Medhwahi, Mohammed Ahmed Ali and Hashim, Fazirulhisyam and Mohd Ali, Borhanuddin and Sali, Aduwati (2016) Medium access prioritizing in the heterogeneous low-rate wireless PANs. In: 2016 IEEE 3rd International Symposium on Telecommunication Technologies (ISTT), 28-30 Nov. 2016, Kuala Lumpur, Malaysia. (pp. 35-40).

Al-Mqdashi, Abdulmajid Mohammed and Sali, Aduwati and Noordin, Nor Kamariah and Hashim, Shaiful Jahari and Nordin, Rosdiadee and Abdel-Rahman, Mohammad J. (2016) An efficient quorum-based rendezvous scheme for multi-radio cognitive radio networks. In: 2016 IEEE 3rd International Symposium on Telecommunication Technologies (ISTT), 28-30 Nov. 2016, Kuala Lumpur, Malaysia. (pp. 59-64).

Al-Ogaidi, Ahmed A. M. and Wayayok, Aimrun and Kamal, Md. Rowshon and Abdullah, Ahmad Fikri (2016) WPEDIS – wetting pattern estimator under drip irrigation systems. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 198-203).

Al-Ogaili, Ali Saadon Mtair and Aris, Ishak and Othman, Mohammad Lutfi and Azis, Norhafiz and Isa, Dino and Hoon, Yap (2016) New technique for decreasing of total harmonic distortion of three- phases bridge rectifier by using the method of harmonic injection. In: 2016 IEEE Conference on Systems, Process and Control (ICSPC 2016), 16-18 Dec. 2016, Melaka, Malaysia. (pp. 248-253).

Al-Qazzaz, Noor Kamal and Md. Ali, Sawal Hamid and Islam, Md. Shabiul and Ahmad, Siti Anom and Rodriguez, Javier Escudero (2016) EEG markers for early detection and characterization of vascular dementia during working memory tasks. In: 2016 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 4-8 Dec. 2016, Kuala Lumpur, Malaysia. (pp. 347-351).

Al-Shanoon, Abdulrahman Abdulkareem Sattoori and Ahmad, Siti Anom and Hassan, Mohd Khair (2016) Re-gripping analysis based on implementation of slip-detection device for robotic hand model. In: 2016 IEEE Region 10 Symposium (TENSYMP), 9-11 May 2016, Bali, Indonesia. (pp. 203-206).

Albakri, Z. M. and Mohd Kassim, Muhamad Saufi and Muhamad Tobib, H. (2016) Comparison study on oil palm fresh fruit bunch (FFB) maturity stages determination based on color recognition model and position of FFB in leaf spiral. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 238-243).

Alhammadi, Abdulraqeb Shaif Ahmed and Hashim, Fazirulhisyam and A. Rasid, Mohd Fadlee and Alraih, Saddam (2016) Effects of different types of RSS data on the system accuracy of indoor localization system. In: 2016 IEEE Region 10 Symposium (TENSYMP), 9-11 May 2016, Bali, Indonesia. (pp. 311-314).

Ali, M. A. and Yusof, Yus Aniza and Chin, Nyuk Ling and Ibrahim, N. M. (2016) Compaction behaviour of Moringa oleifera leaves powder by fitting into compression models. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 375-381).

Amat Sairin, Masyitah and Abd Latiff, Nur Hamilia and Abd Aziz, Samsuzana and Rokhani, Fakhrul Zaman (2016) Distinguishing edible oil using dielectric spectroscopy at microwave frequencies of 8.2–12.1 GHz. In: 2016 10th International Conference on Sensing Technology (ICST), 11-13 Nov. 2016, Nanjing, China. .

Amat Sairin, Masyitah and Ahmad Nizar, Nina Naquiah and Abd Aziz, Samsuzana and Rokhani, Fakhrul Zaman (2016) Study of dielectric permittivity and fatty acid composition for fats and oil in wide frequency spectroscopy measurement at 0.5 – 50 GHz. In: 2016 10th International Conference on Sensing Technology (ICST), 11-13 Nov. 2016, Nanjing, China. .

As'arry, Azizan and Jamaluddin, Hafiz and Tuan Abdul Rahman, Tuan Ahmad Zahidi and Md Rezali, Khairil Anas and Md. Zain, Mohd Zarhamdy (2016) Suppression of Parkinson's hand-like tremor using fuzzy-PID controller. In: 2016 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), 22 Oct. 2016, Faculty of Electrical Engineering, Universiti Teknologi Mara, Shah Alam. .

Badmus, Abdurrahman Adeleye and Yusof, Yus Aniza and Chin, Nyuk Ling and A. Aziz, N. (2016) Antioxidant capacity and phenolics of spray dried Arrenga pinnata juice powder. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 149-152).

Bajuri, Farid and Mazlan, Norkhairunnisa and Ishak, Mohamad Ridzwan and Imatomi, Junichiro (2016) Flexural and compressive properties of hybrid kenaf/silica nanopeprintss in epoxy composite. In: 5th International Conference on Recent Advances in Materials, Minerals & Environment (RAMM) & 2nd International Postgraduate Conference on Materials, Mineral and Polymer (MAMIP), 4 - 6 Aug 2015, Penang, Malaysia. (pp. 955-960).

Bashi, Omar Ibrahim Dallal and Wan Hasan, Wan Zuha and Shafie, Suhaidi and Azis, Norhafiz (2016) Pattern investigation for landfill of methane gas concentration measurement. In: 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation (ROMA 2016), 25-27 Sept. 2016, Ipoh, Perak, Malaysia. .

Burhanuddin, Zulkifli and Gomes, Chandima and Gomes, Ashen and Ab Kadir, Mohd Zainal Abidin and Wan Ahmad, Wan Fatinhamamah and Azis, Norhafiz (2016) Characteristics of fulgurite-like structures under HV conditions: effects on electrical earthing systems. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Chang, Jing Jing and Syam, Syafiie (2016) Stability analysis of closed-loop anaesthesia system with nonlinear uncertainty: a circle criterion approach. In: 2016 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 4-8 Dec. 2016, Kuala Lumpur, Malaysia. (pp. 664-668).

Che Soh, Azura and Mohamad Radzi, Nur Fadzilah and Ishak, Asnor Juraiza and Hassan, Mohd Khair and Ahmad, Siti Anom (2016) E-botanist system for agricultural applications. In: 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES 2016), 14-16 Nov. 2016, Putrajaya, Malaysia. (pp. 144-146).

Che Soh, Azura and Radzi, N. F. M. and Ishak, Asnor Juraiza and Hassan, Mohd Khair and Ahmad, Siti Anom (2016) E-botanist system for agricultural applications. In: International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES) 2016, 14-16 Nov. 2016, Putrajaya, Malaysia. (pp. 144-146).

Chia, Chen Ciang and Gan, Chia Sheng and Mustapha, Faizal (2016) Local wavefield velocity imaging for damage evaluation. In: 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE), 17-22 July 2016, Atlanta, Georgia, USA. (pp. 1-7).

Chin, Nyuk Ling and Kek, Siok Peng and Quek, Meei Chien (2016) DNA-based method for identification of species origin of honey and edible bird’s nest. In: Proceedings of the 2016 International Conference on Biomedical and Biological Engineering, 15-17 July 2016, Shanghai, China. (pp. 317-420).

Choo, Hong Ning and Abdul Latiff, Nurul Adilah and Varahram, Pooria and Mohd Ali, Borhanuddin (2016) Error reduction of memory polynomial with binomial reduction in digital pre-distortion for wireless communication systems. In: International Conference on Information and Communication Technology Convergence (ICTC 2016), 19-21 Oct. 2016, Ramada Plaza Hotel, Jeju Island, South Korea. (pp. 505-510).

Danial, Rabiatuladawiyah and Abdullah, Luqman Chuah and Sobri, Shafreeza (2016) Potential of copper electrodes in electrocoagulation process for glyphosate herbicide removal. In: International Symposium on Civil and Environmental Engineering 2016 (ISCEE 2016), 5-6 Dec. 2016, Novotel Melaka, Melaka, Malaysia. (pp. 1-8).

Darmawan, Rosli and Adam, Nor Mariah and Abdul Aziz, Nuraini and Mohd Ariffin, Mohd Khairol Anuar (2016) Investigation on alternative methods to enhance the cooling capacity of an open pool reactor. In: International Nuclear Science, Technology and Engineering Conference 2016 (NuSTEC2016), 8-10 Aug. 2016, Selangor, Malaysia. (pp. 1-11).

Daud, R. A. A. and Abdullah, Ahmad Fikri (2016) Accuracy assessment of Terrestrial Laser Scanning (TLS), Airborne Light Detection and Ranging (LiDAR), and Interferometric Aperture Synthetic Radar (IfSAR) in agriculture. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 351-356).

Deylami, Mahsa Ziabakhsh and Abdul Rahman, Russly and Bakar, Jamilah and Tan, Chin Ping and Olusegun, Lasekan (2016) Stability of microencapsulated mangosteen pericarp anthocyanin as a natural food colorant: a kinetic study. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 357-362).

Doljinsuren, Myagmar and Gomes, Chandima (2016) Lightning related human casualties in Mongolia. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Faisal, Ali Raed and Hashim, Fazirulhisyam and Ismail, Mahamod and Noordin, Nor Kamariah (2016) Internet utility evaluation of a multi-start particle swarm optimization beamformer in a partial joint processing cellular network. In: 2016 6th International Conference on Intelligent and Advanced Systems (ICIAS 2016), 15-17 Aug. 2016, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia. .

Ferdosian, Nasim and Othman, Mohamed and Kweh, Yeah Lun and Mohd Ali, Borhanuddin (2016) Optimal solution to the fractional knapsack problem for LTE overload-state scheduling. In: 2016 IEEE 3rd International Symposium on Telecommunication Technologies (ISTT), 28-30 Nov. 2016, Kuala Lumpur, Malaysia. (pp. 97-102).

Ferdosian, Nasim and Othman, Mohamed and Kweh, Yeah Lun and Mohd Ali, Borhanuddin (2016) Overload-state downlink resource scheduling and its challenges towards 5G networks. In: 2016 IEEE 21st International Workshop on Computer Aided Modelling and Design of Communication Links and Networks (CAMAD), 23-25 Oct. 2016, Toronto, ON, Canada. (pp. 154-156).

Ghazali, Anith Khairunnisa and Minhat, Mohd Sabri and Hassan, Mohd Khair (2016) Automated power control system for reactor TRIGA PUSPATI. In: International Nuclear Science, Technology and Engineering Conference 2016 (NuSTEC2016), 8-10 Aug. 2016, Selangor, Malaysia. (pp. 1-5).

Goh, Zai Peng and Mohd Radzi, Mohd Amran and Hizam, Hashim and Abdul Wahab, Noor Izzri (2016) Investigation of harmonic components on voltage flicker measurement. In: 2016 IEEE 6th International Conference on Power and Energy (PECON2016), 28-29 Nov. 2016, Melaka, Malaysia. (pp. 13-17).

Gomes, Ashen and Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin and Izadi, Mehdi and Rock, Michael (2016) Evaluation of lightning protection systems proposed for small structures by electromagnetic simulation. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Gomes, Chandima and Gomes, Ashen (2016) Lightning safety psyche. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Gomes, Chandima and Lubasi, Foster Chileshe and Gomes, Ashen and Doljinsuren, Myagmar (2016) Concerns of the application of lightning protection risk assesment for small structures. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Hajikhani, Maryam and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Gomes, Chandima and Jasni, Jasronita (2016) Lightning fatalities and injuries in Malaysia from 2008 to 2015. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Hajikhani, Maryam and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Gomes, Chandima and Jasni, Jasronita (2016) A comparison of lightning human fatalities between Malaysia and United States. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Haron, Siti Humaira and Sahid, Ismail and Mispan, Muhammad Radzali and Abd Rahman, Nor Faiza and Khalid, Khairi and Abdul Rasid, Muhammad Zamir and Mohd Sidek, Lariyah (2016) Time series analysis of heavy metal concentrations along the watershed gradient in Cameron Highlands: geospatial approaches. In: 2nd International Conference on Advances in Renewable Energy and Technologies (ICARET 2016), 23-25 Feb. 2016, Putrajaya, Malaysia. (pp. 1-5).

Hasab, Hashim Ali and Ahmad, Anuar and Marghany, Maged and Ziboon, Abdul Razzak (2016) Develop algorithm for change detection of the salinity from Landsat-8 images. In: 6th International Graduate Conference on Engineering, Science and Humanities (IGCESH 2016), 15-17 Aug. 2016, Universiti Teknologi Malaysia, Johor Bahru, Malaysia. (pp. 534-536).

Hazmin, Mohd Haniff and Mustapha, Faizal and Mohd Ariffin, Mohd Khairol Anuar and Abdul Halin, Izhal (2016) Waterwheel fin design and its efficiency for a diversion-based hydropower system in Malaysian rivers. In: 13th Universiti Malaysia Terengganu International Annual Symposium on Sustainability Science and Management (UMTAS 2016), 13-15 Dec. 2016, Primula Beach Hotel, Kuala Terengganu. (pp. 342-348).

Hejazi, Maryamsadat and Syed Mohamed, Syed Abdul Rahman Al-Haddad and Hashim, Shaiful Jahari and Abdul Aziz, Ahmad Fazli and Singh, Yashwant Prasad (2016) Feature level fusion for biometric verification with two-lead ECG signals. In: 2016 IEEE 12th IEEE International Colloquium on Signal Processing and its Applications (CSPA2016), 4-6 Mar. 2016, Melaka, Malaysia. (pp. 54-59).

Hoon, Yap and Mohd Radzi, Mohd Amran and Hassan, Mohd Khair and Mailah, Nashiren Farzilah (2016) Three-phase three-level shunt active power filter with simplified synchronous reference frame. In: 2016 IEEE Industrial Electronics and Applications Conference (IEACon 2016), 20-22 Nov. 2016, Kota Kinabalu, Sabah. (pp. 1-6).

Hussain, Siti Aslina and Idris, Azni (2016) Spiral motion of air bubbles in multiphase mixing for wastewater treatment. In: 4th International Conference on Process Engineering and Advanced Materials (ICPEAM2016), 15–17 Aug 2016, Kuala Lumpur, Malaysia. (pp. 1034-1042).

Hussein, A. M. H. and Abang Abdul Majid, Dayang Laila and Abdullah, Ermira Junita (2016) Shape memory alloy actuation effect on subsonic static aeroelastic deformation of composite cantilever plate. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-10).

Hussein, H. and Ibrahim, Mohd Nordin and Ab. Aziz, Norashikin and Ismail, A. (2016) Microwave application in micronizing wet fermented cocoa beans. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur. (pp. 288-297).

Idriss, Yahaya and Sahbudin, Ratna Kalos Zakiah and Hitam, Salasiah and Ahmad Anas, Siti Barirah (2016) Performance comparison of indoor VLC system employing SAC-OCDMA technique. In: 2016 IEEE 6th International Conference on Photonics (ICP), 14-16 Mar. 2016, Kuching, Sarawak. .

Iranpanah, Havzhin and Mohd Ali, Borhanuddin and Hashim, Fazirulhisyam and Mohamad, Hafizal (2016) Distributed power control and beamforming for cognitive two-way relay networks using a game-theoretic approach. In: 2016 IEEE 3rd International Symposium on Telecommunication Technologies (ISTT), 28-30 Nov. 2016, Kuala Lumpur, Malaysia. (pp. 81-86).

Ishkandar, C. D. M. and Mat Nawi, Nazmi and Chen, Guangnan and Jensen, Troy and Mehdizadeh, Saman Abdanan (2016) Comparison of chemometrics methods for classification of sugarcane brix using visible and shortwave near-infrared technology. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 214-219).

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Abd Rahman, Muhammad Syahmi and Mehrjou, Mohammad Rezazadeh and Hajikhani, Maryam (2016) On the effect of insulator angle with respect to the cross arm on the distribution of lightning electric fields. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Abd Rahman, Muhammad Syahmi and Hajikhani, Maryam (2016) Effects of air humidity on the performance of a polymer insulator under lightning induced voltage conditions. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Hajikhani, Maryam and Gomes, Chandima (2016) Evaluation of lightning location and lightning current wave shape using measured lightning magnetic fields at two stations. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Izadi, Mahdi and Danafar, Firoozeh and Ab Kadir, Mohd Zainal Abidin (2016) Natural rubber- carbon nanotubes composites, recent advances and challenges for electrical applications. In: 2016 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), 22 Oct. 2016, Faculty of Electrical Engineering, Universiti Teknologi Mara, Shah Alam. (pp. 61-65).

Izadi, Mahdi and Mariun, Norman and Mehrjou, Mohammad Rezazadeh and Ab Kadir, Mohd Zainal Abidin and Misron, Norhisam and Mohd Radzi, Mohd Amran (2016) Broken rotor bar fault detection in line start permanent magnet synchronous motor using transient current signal. In: 2016 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), 22 Oct. 2016, Faculty of Electrical Engineering, Universiti Teknologi Mara, Shah Alam. (pp. 51-54).

Jamaluddin, Nurul Fauzani and Ahmad, Siti Anom and Mohd Noor, Samsul Bahari and Wan Hasan, Wan Zuha and Yaacob, Azhar and Adam, Yunus (2016) Estimation of wavelet threshold value for surface EMG baseline removal. In: 2016 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 4-8 Dec. 2016, Kuala Lumpur, Malaysia. (pp. 102-105).

Jamaludin, Farah Adilah and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Azis, Norhafiz and Jasni, Jasronita and Abd Rahman, Muhammad Syahmi (2016) Considering the effects of a RTV coating to improve electrical insulation against lightning. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Jumali, Suriani and Ya'acob, Mohammad Effendy and Shamsudin, Rosnah and Othman, Noor Fadzlinda (2016) Field assessment for photovoltaic array as herbal plots based on bioactive compounds analysis. In: 2016 IEEE Industrial Electronics and Applications Conference (IEACon 2016), 20-22 Nov. 2016, Kota Kinabalu, Sabah. (pp. 88-91).

Kakahy, Amer Najat Najmaldeen and Ahmad, Desa and Hamid, Md. Akhir and Sulaiman, Shamsuddin and Aris, Ishak (2016) Effects of cutting speeds, moisture contents and sweet potato varieties on tractor fuel consumption. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 66-70).

Karunakaran, S. and Abang Abdul Majid, Dayang Laila and Mohd Tawil, M. Lufti (2016) Flammability of self-extinguishing kenaf/ABS nanoclays composite for aircraft secondary structure. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-11).

Khalaf, Ahmed Lateef and Mohamad, Fatimah Syahidah and M. Thirunavakkarasu, Punithavathi and Shabaneh, Arafat Abdallah Abdelwadod and Abdul Rahman, Norizah and Lim, Hong Ngee and Paiman, Suriati and Yusof, Nor Azah and Mahdi, Mohd Adzir and Yaacob, Mohd Hanif (2016) Modified plastic optical fiber coated graphene/polyaniline nanocompositefor ammonia sensing. In: 2016 IEEE 6th International Conference on Photonics (ICP), 14-16 Mar. 2016, Kuching, Sarawak. .

Khalid, Norashikin and Zainuddin, Mohamad Faiz and Abbas, Zulkifly and Mohamed, Tity Nazleen and Sabli, Nordin (2016) Determination of ethanol concentration of ethanol/water mixture solutions with open ended coaxial method. In: 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES), 14-16 Nov. 2016, Putrajaya, Malaysia. (pp. 652-656).

Khudhair, Zaid Hadi and Sulaiman, Nasri and Abdul Halin, Izhal and Md Yunus, Nurul Amziah (2016) Implementation of image enhancement techniques based on Intel Edison platform. In: 2016 1st International Conference on Information Technology, Information Systems and Electrical Engineering (ICITISEE 2016), 23-24 Aug. 2016, Yogyakarta, Indonesia. (pp. 17-20).

Kohneh, Samad Shirzadi Deh and Hizam, Hashim and Abdul Wahab, Noor Izzri and Maghami, Mohammad Reza and MacAlpine, Sara Margaret (2016) Increasing energy harvest of photovoltaic arrays under uniform illumination: a case study on photovoltaic arrays in Boulder CO and Tucson AZ. In: 2016 IEEE 6th International Conference on Power and Energy (PECON2016), 28-29 Nov. 2016, Melaka, Malaysia. (pp. 23-27).

Liew, C. L. and Abu Talib, Abd. Rahim and Jacobs, Ronald Lynn (2016) Malaysian aviation technologist promotion to managerial role: an empirical overview. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-9).

Lim, Yong Hui and Chew, Irene Mei Leng and Choong, Thomas Shean Yaw and Tan, Mei Ching and Tan, Khang Wei (2016) Nanocrystalline cellulose isolated from oil palm empty fruit bunch and its potential in cadmium metal removal. In: 2016 International Conference on Frontiers of Sensors Technologies (ICFST 2016), 12-14 Mar. 2016, Hong Kong. (pp. 1-5).

M. Azami, H. N. and C. Lah, C. H. and Amat Sairin, Masyitah and M. Zobir, S. A. and Rokhani, Fakhrul Zaman and Abdul Rashid, S. and Muhammad Noor, Ahmad Shukri (2016) Fluorescence dynamics of graphene quantum dots for detecting lard substance. In: 2016 IEEE 6th International Conference on Photonics (ICP), 14-16 Mar. 2016, Kuching, Sarawak. .

M. Thirunavakkarasu, Punithavathi and Muhammad Noor, Ahmad Shukri and Khalaf, Ahmed Lateef and Yaacob, Mohd Hanif (2016) Highly sensitive plastic optical fiber with palladium sensing layer for detection of hydrogen gas. In: 2016 IEEE Region 10 Symposium (TENSYMP), 9-11 May 2016, Bali, Indonesia. (pp. 390-393).

Maghami, Mohammad Reza and Maghoul, Alireza and Dehkohneh, Samad Shirzadi and Gomes, Chandima and Hizam, Hashim and Othman, Mohammad Lutfi (2016) Hybrid renewable energy as power supply for shelter during natural disasters. In: 2016 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), 22 Oct. 2016, Faculty of Electrical Engineering, Universiti Teknologi Mara, Shah Alam. (pp. 34-39).

Majeed, Sama Fouad and Ismail, Alyani and Sali, Aduwati and Raja Abdullah, Raja Syamsul Azmir (2016) High performances stack microstrip antenna for under water communications at 2.4 GHz. In: 2016 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE), 11-13 Dec. 2016, Langkawi, Kedah, Malaysia. (pp. 5-10).

Manan, Nor Hafizah and Abang Abdul Majid, Dayang Laila and Romli, Fairuz Izzuddin (2016) Mould design and manufacturing considerations of honeycomb biocomposites with transverse fibre direction for aerospace application. In: 6th Innovation in Aerospace Engineering and Technology (AEROTECH VI), 8-9 Nov. 2016, Kuala Lumpur, Malaysia. (pp. 1-7).

Mat Lazim, Siti Saripa Rabiah and Mat Nawi, Nazmi (2016) Potential application of spectroscopic method for size and shape detection fruits: a review. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 318-322).

Mat Nong, Mohd Ali and Osman, Rosiah and Md Yusof, Juraina and Mohd Sidek, Roslina (2016) Motorcycle image tracking and edge detections based on Simulink software. In: 2016 6th International Conference on Intelligent and Advanced Systems (ICIAS 2016), 15-17 Aug. 2016, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia. .

Md Rosli, Mohd Anwarul Arif and M. Thirunavakkarasu, Punithavathi and Lim, Hong Ngee and Muhammad Noor, Ahmad Shukri (2016) Dynamic response of tapered optical fiber coated with graphene oxide for detecting aqueous ethanol. In: 2016 IEEE 6th International Conference on Photonics (ICP), 14-16 Mar. 2016, Kuching, Sarawak. .

Md. Yusoff, Zainuddin and Abd Aziz, Azlan and Nik Daud, Nik Norsyahariati and Nahazanan, Haslinda and Raju, Gobindaran (2016) Compressive and tensile strengths of Kuala Lumpur limestone and Kuala Lumpur granite: in relation to their internal properties. In: World Research & Innovation Convention on Engineering & Technology 2016, 24-25 Oct. 2016, Langkawi, Kedah, Malaysia. (pp. 8-12).

Meor Ahmad Tajudin, Meor Ahmad Faris and Abdullah, Mohd Mustafa Al Bakri and Ismail, Khairul Nizar and Muniandy, Ratnasamy and Mahmad Nor, Aiman and Putra Jaya, Ramadhansyah and Ahmad Zailani, Warid Wazien (2016) Properties of hooked steel fibers reinforced alkali activated material concrete. In: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016), 1-2 May 2016, Phuket, Thailand. (pp. 1-6).

Minhad, Khairun Nisa' and Md. Ali, Sawal Hamid and Ooi, Jonathan Shi Khai and Ahmad, Siti Anom (2016) Human emotion classifications for automotive driver using skin conductance response signal. In: 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES 2016), 14-16 Nov. 2016, Putrajaya, Malaysia. (pp. 371-375).

Misron, Norhisam and Zakaria, Siti Nur Umira and Raja Othman, Raja Nor Firdaus Kashfi and Yoshino, Kento and Maeda, K. and Hanamoto, Tsuyoshi (2016) Characteristic of double-stator PM machine for modular type power train in electric vehicles. In: 2016 IEEE 6th International Conference on Power and Energy (PECON2016), 28-29 Nov. 2016, Melaka, Malaysia. (pp. 786-791).

Moghaddasi, Majid and Sahbudin, Ratna Kalos Zakiah and Mokhtar, Makhfudzah and Ahmad Anas, Siti Barirah (2016) Investigation of circulation noise effect on SAC-OCDMA system with ring topology. In: 2016 IEEE 6th International Conference on Photonics (ICP), 14-16 Mar. 2016, Kuching, Sarawak. .

Mohamad, Ahmad Syukri and Mariun, Norman (2016) Simulation of a 41-level inverter built by cascading two symmetric cascaded multilevel inverter. In: 2016 7th IEEE Control and System Graduate Research Colloquium (ICSGRC 2016), 8 Aug. 2016, UiTM Shah Alam, Selangor, Malaysia. (pp. 12-16).

Mohammad, Rosdi and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Mustapha, Faizal and Aoyama, Hideki (2016) Optimization of tool geometry design: the effects on surface roughness. In: International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016), 28-30 Aug. 2016, Kuala Lumpur, Malaysia. (pp. 129-130).

Mohammed, Zahraa Abdulkareem and Wan Ahmad, Wan Fatinhamamah and Jasni, Jasronita and Abdul Wahab, Noor Izzri (2016) A review on optimal location of distributed generation techniques in electrical network. In: 2016 IEEE 6th International Conference on Power and Energy (PECON2016), 28-29 Nov. 2016, Melaka, Malaysia. (pp. 632-636).

Mohd Basri, Mohd Salahuddin and Mazlan, Norkhairunnisa and Mustapha, Faizal and Ishak, Mohamad Ridzwan (2016) Correlation between compressive strength and fire resistant performance of rice husk ash-based geopolymer binder for panel applications. In: Engineering Technology International Conference 2016 (ETIC 2016), 5-6 Aug. 2016, Ho Chi Minh City, Vietnam. (pp. 1-9).

Mohd Harithuddin, Ahmad Salahuddin (2016) Quasi-satellite system for leader-follower spacecraft formation. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016 , Kuala Lumpur, Malaysia. (pp. 1-9).

Mohd Isa, Maryam and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Azis, Norhafiz and Izadi, Mahdi and Alyozbaky, Omar Sh. (2016) Analysis on magnetic flux density and core loss for hexagonal and butt-lap core joint transformers. In: 2nd IEEE Southern Power Electronics Conference (SPEC), 5-8 Dec. 2016, Auckland, New Zealand. (pp. 1-4).

Mohd Pauzi, Nur Irfah and Shariffuddin, Ahmad Sulaimi and Omar, Husaini and Misran, Halina (2016) Long-term settlement prediction at open dumping area using Hossein and Gabr method for new development. In: 3rd International Conference of Global Network for Innovative Technology 2016 (IGNITE 2016), 27-29 Jan. 2016, Penang, Malaysia. (pp. 1-5).

Mohd Salleh, Salwani and Sahari, Barkawi and Ali, Aidy and Hassan, Mas Ayu and Daud, Rosdi (2016) Correlations between axial and oblique loaded column. In: 3rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016), 21-23 Oct. 2016, Shanghai, China. (pp. 1-4).

Mohd Shafri, Helmi Zulhaidi (2016) The use of hyperspectral remote sensing systems in precision agriculture: current status and future trends. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 13-18).

Mohd Zainuri, Muhammad Ammirrul Atiqi and Mohd Radzi, Mohd Amran and Che Soh, Azura and Mariun, Norman and Abd Rahim, Nasrudin (2016) Performance evaluation of Modified Widrow-Hoff ADALINE under effect of photovoltaic with shunt active power filter. In: 2016 IEEE Industrial Electronics and Applications Conference (IEACon 2016), 20-22 Nov. 2016, Kota Kinabalu, Sabah. (pp. 128-132).

Mohd Zin, Nur Fatin Awanis and Ibrahim, Mohd Nordin (2016) Simulation validation of flat-bed drying of paddy. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 298-305).

Mohtar, Mohd Nazim and Ramli, Muhammad Mahyiddin and Md Yunus, Nurul Amziah and Jasni, Jasronita and Aziz, N. (2016) Clarification of colloidal particles in lake and river water using AC Electrokinetic. In: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016), 1-2 May 2016, Phuket, Thailand. (pp. 1-5).

Montazer, Elham and Mirzaei, Masoud and Salami, Erfan and Ward, Thomas Arthur and Romli, Fairuz Izzudin and Kazi, Salim Newaz (2016) Optimization of a synthetic jet actuator for flow control around an airfoil. In: 6th Innovation in Aerospace Engineering and Technology (AEROTECH VI), 8-9 Nov. 2016, Kuala Lumpur, Malaysia. (pp. 1-12).

Muhadi, Nur 'Atirah and Abdullah, Ahmad Fikri and Vojinovic, Zoran (2016) Estimating agricultural losses using flood modeling for rural area. In: International Symposium on Civil and Environmental Engineering 2016 (ISCEE 2016), 5-6 Dec. 2016, Novotel Melaka, Melaka, Malaysia. (pp. 1-8).

Muhadi , N. A. and Abdullah, Ahmad Fikri and Mohd Kassim, Muhamad Saufi (2016) Quantification of terrestrial laser scanner (TLS) elevation accuracy in oil palm plantation for IFSAR improvement. In: 8th IGRSM International Conference and Exhibition on Remote Sensing & GIS (IGRSM 2016) , 13-14 Apr 2016, Kuala Lumpur, Malaysia. (pp. 1-8).

Muhammad, Muhammad Tahir and Haron, Nuzul Azam and Ales @ Alias, Aidi Hizami and Harun, Aizul Nahar (2016) Strategies to improve cost and time control using building information model (BIM). In: 13th International Conference on Innovation and Management (ICIM 2016), 28-30 Nov. 2016, Kuala Lumpur, Malaysia. (pp. 95-110).

Muslim, May Ali and Abdul Rashid, Suraya and Hamidon, Mohd Nizar and Md. Yasin, Faizah (2016) Simple synthesis of large-area multilayer graphene films on dielectric substrate via chemical vapor deposition route (synthesis of MLG films on dielectric substrates via CVD route). In: 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES 2016), 14-16 Nov. 2016, Putrajaya, Malaysia. (pp. 293-296).

Mustafa, Mayada Salih Abdalla and Mohd Ali, Borhanuddin and Hashim, Shaiful Jahari and Rated, Mohd F. B. A. (2016) Work in progress: a proposal for a hotspot metric to extend the lifetime in wireless sensor network. In: 2016 International Conference on Advances in Computing, Communications and Informatics (ICACCI), 21-24 Sept. 2016, Jaipur, India. (pp. 1635-1639).

Nawi, Mohd Nuriman and Rashid, Nurulhani Diana and Berhanuddin, Dilla Duryha and Md Zain, Ahmad Rifqi and Yeop Majlis, Burhanuddin and Mahdi, Mohd Adzir (2016) Photonic crystal (PhC) nanowires for infrared photodetectors. In: 12th IEEE International Conference on Semiconductor Electronics 2016 (ICSE2016), 17-19 Aug. 2016, Pullman Hotel, Bangsar, Kuala Lumpur. (pp. 153-156).

Ng, Lin Cieh and Sulaiman, Safwan and Mokhtar, Mohd Noriznan and Naim, Mohd Nazli and Baharuddin, Azhari Samsu (2016) Immobilization of cyclodextringlucanotransferase from Bacillus maceranson bleached kenafbast micro-fibre. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 232-237).

Nik Murzaini, Nik Masturah and Taip, Farah Saleena (2016) Optimization of processing conditions in drying of different parts pumpkin powder using air fryer method. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 220-225).

Ogunwa, T. T. and Abdullah, Ermira Junita (2016) Flight dynamics and control modelling of damaged asymmetric aircraft. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-18).

Omar, Zaid and Ahmed, Saif S. and Mohd Mokji, Musa and Hanafi, Marsyita and Bhateja, Vikrant (2016) Wavelet-based medical image fusion via a non-linear operator. In: 2016 IEEE Region 10 Conference (TENCON), 22-25 Nov. 2016, Marina Bay Sands, Singapore. (pp. 1262-1265).

Ooi, Jonathan Shi Khai and Ahmad, Siti Anom and Chong, Yu Zheng and Md. Ali, Sawal Hamid and Ai, Guangyi and Wagatsuma, Hiroaki (2016) Driver emotion recognition framework based on electrodermal activity measurements during simulated driving conditions. In: 2016 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 4-8 Dec. 2016, Kuala Lumpur, Malaysia. (pp. 365-369).

P. Mohammed, Mohd Afandi and Wanigasooriya, Leonard and Charalambides, Maria N. (2016) Experimental and numerical investigation of ram extrusion of bread dough. In: 19th International ESAFORM Conference on Material Forming (ESAFORM 2016), 27-29 Apr. 2016, Nantes, France. (pp. 1-6).

Phoon, Kah Yee and Ng, Hui Suan and Mokhtar, Mohd Noriznan and Zakaria, R. and Yim, Hip Seng (2016) Enrichment of Vitamin E from crude palm oil by adsorption-desorption process. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 480-485).

Rahmam, Syuhaidah and Naim, Mohd Nazli and Mokhtar, Mohd Noriznan and Abu Bakar, Noor Fitrah (2016) The solidification of encapsulated jasmine extract using electrostatic atomizer (electrospray). In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 282-287).

Raja Abdullah, Raja Syamsul Azmir and Salah, Asem Ahmad and Abdul Aziz, Noor Hafizah and Abdul Rashid, Nur Emileen (2016) Vehicle recognition analysis in LTE based forward scattering radar. In: 2016 IEEE Radar Conference (RadarConf), 2-6 May 2016, Philadelphia, Pennsylvania. .

Rameli, Norhidayu and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Gomes, Chandima and Azis, Norhafiz (2016) Effect of soil resistivity on magnetic field in the case of lightning strike to a tall structure. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Rameli, Norhidayu and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Gomes, Chandima and Azis, Norhafiz (2016) Variations in return stroke velocity and its effect on the return stroke current along lightning channel. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Ramli, M. S. and Abu Talib, Abd. Rahim and Harmin, Mohammad Yazdi and Mohd Saiah, H. R. (2016) Effect of multiple jet impingement plate configurations on Reynolds Number in a pipe. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-14).

Ramli, Rosmamuhamadani and Sulaiman, Shamsuddin and Mohamed Ariff, Azmah Hanim and Ismail, Mohd Idris Shah and Talari, Mahesh Kumar and Md Yahaya, Sabrina (2016) Corrosion characterisation of Al-Cu reinforced in-situ TiB2. In: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016), 1-2 May 2016, Phuket, Thailand. (pp. 1-7).

Richard, Adesiji Adeolu and Mohammed Ali, Thamer Ahmed and Nik Daud, Nik Norsyahariati and Mustapha, Sa'ari and Sayok, Alexander Kiew and Padfield, Roryd and Evers, Stephanie (2016) Achieving best management practices in an oil palm plantation at tropical peatland: a gap analysis. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 19-24).

Romli, Fairuz Izzudin and Abdul Rahman, K. and Ishak, F. D. (2016) In-flight food delivery and waste collection service: the passengers perspective and potential improvement. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-7).

Saeidi, Tale and Ismail, Idris and Alhawari, Adam Reda Hasan and Sali, Aduwati and Ismail, Alyani (2016) High gain dual-band couple feed transparent THz antenna for satellite communications. In: 2016 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE), 11-13 Dec. 2016, Langkawi, Kedah, Malaysia. (pp. 11-15).

Saleh, Suhairie and Cholan, Noran Azizan and Sulaiman, Abdul Hadi and Mahdi, Mohd Adzir (2016) Self-seeded four-wave mixing cascades utilizing fiber Bragg grating. In: 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES 2016), 14-16 Nov. 2016, Putrajaya, Malaysia. (pp. 63-65).

Salihu, Mustafa Shehu and Misron, Norhisam and Othman, Mohammad Lutfi and Mariun, Norman and Hanamoto, Tsuyoshi (2016) Power speed characteristics of a novel double-stator PM generator integrated with a magnetic gear. In: 2016 IEEE 6th International Conference on Power and Energy (PECON2016), 28-29 Nov. 2016, Melaka, Malaysia. (pp. 564-569).

Salihu, Shehu Mustafa and Misron, Norhisam and Mariun, Norman and Othman, Mohammad Lutfi and Hanamoto, Tsuyoshi (2016) A novel double-stator permanent magnet generator integrated with a magnetic gear. In: 4th International Symposium on Applied Engineering and Sciences (SAES2016), 17–18 Dec. 2016, Kyushu Institute of Technology, Japan. (pp. 69-80).

Salman, Emad Hmood and Noordin, Nor Kamariah and Hashim, Shaiful Jahari and Hashim, Fazirulhisyam (2016) A new cooperative spectrum sensing scheme based on discrete cosine transform. In: 2016 IEEE 3rd International Symposium on Telecommunication Technologies (ISTT), 28-30 Nov. 2016, Kuala Lumpur, Malaysia. (pp. 108-111).

Salman, Emad Hmood and Noordin, Nor Kamariah and Hashim, Shaiful Jahari and Hashim, Fazirulhisyam and Ng, Chee Kyun (2016) A performance analysis of a new periodogram for spectrum sensing. In: 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES 2016), 14-16 Nov. 2016, Putrajaya, Malaysia. (pp. 592-596).

Sari, Anjar Ruspita and Abdul Rahman, Russly and Shukri, Radhiah and Hussain, Norhayati (2016) Optimization process of partially cooked corn grits (PCCG) by response surface methodology. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 177-183).

Shitu, Abubakar and Muhammad, Aliyu Idris and Yoshida, Hiroyuki and Siajam, Shamsul Izhar (2016) Production of phenolic compounds from durian peel waste using sub-critical water. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 59-65).

Sivaraj, Lalitha and Md Yunus, Nurul Amziah and Mohtar, Mohd Nazim and Abd Aziz, Samsuzana and Zainal Abidin, Zurina and Saripan, M. Iqbal and Rokhani, Fakhrul Zaman (2016) Portable biosensor for chronic malaria detection. In: 17th International Symposium on Quality Electronic Design (ISQED 2016), 15-16 Mar. 2016, Santa Clara, California. (pp. 248-251).

Song, Yee Kai and Chew, Irene Mei Leng and Choong, Thomas Shean Yaw and Tan, Jully and Tan, Khang Wei (2016) Isolation of nanocrystalline cellulose from oil palm empty fruit bunch – a response surface methodology study. In: 2016 3rd International Conference on Chemical and Biological Sciences (ICCBS 2016), 23-25 Mar. 2016, Amsterdam, Netherlands. (pp. 1-5).

Song, Yee Kai and Chew, Irene Mei Leng and Choong, Thomas Shean Yaw and Tan, Khang Wei (2016) Nanocrystalline cellulose, an environmental friendly nanoparticle for pharmaceutical application – a quick study. In: 2016 3rd International Conference on Chemical and Biological Sciences (ICCBS 2016), 23-25 Mar. 2016, Amsterdam, Netherlands. (pp. 1-5).

Srazhidinov, Radik and Raja Ahmad, Raja Mohd Kamil (2016) Performance comparison of LFXLMS, MOVFXLMS and THF-NLFXLMS algorithms for Hammerstein NANC. In: 2016 International Conference on Instrumentation, Control, and Automation (ICA 2016), 29-31 Aug. 2016, Institut Teknologi Bandung, Bandung, Indonesia. (pp. 12-15).

Srazhidinov, Radik and Raja Ahmad, Raja Mohd Kamil (2016) Performance comparison of THF-NLFXLMS and VFXLMS algorithms for Hammerstein NANC. In: 2016 IEEE Conference on Systems, Process and Control (ICSPC 2016), 16-18 Dec. 2016, Melaka, Malaysia. (pp. 76-79).

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Evaluation on the process parameters influencing the surface texture using open-source 3D printing. In: International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016), 28-30 Aug. 2016, Kuala Lumpur, Malaysia. (pp. 127-128).

Suleiman, Samaila and Wan Ismail, Wan Ishak and Mohd Kassim, Muhamad Saufi and Mahadi @ Othman, Muhammad Razif (2016) Hydraulic system for wireless control of high clearance inter-row weeding in organic-product. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 112-117).

Tan, Chee Phang and Mokhtar, Mohammad Harris and Mokhtar, Mohd Nazim and Rokhani, Fakhrul Zaman (2016) Time-division multiple access based intra-body communication for wearable health tracker. In: 17th International Symposium on Quality Electronic Design (ISQED 2016), 15-16 Mar. 2016, Santa Clara, California. (pp. 468-472).

Tang, Sai Hong and Ng, Tan Ching and Chong, Wei Jian and Chen, Kah Pin (2016) Case study on lean manufacturing system implementation in batch printing industry Malaysia. In: 3rd International Conference on Manufacturing and Industrial Technologies (ICMIT 2016), 25-27 May 2016, Istanbul, Turkey. (pp. 1-4).

Thangasamy, Veeraiyah and Thiruchelvam, Vinesh and Hamidon, Mohd Nizar and Hashim, Shaiful Jahari and Bukhori, Muhammad Faiz and Yusoff, Zubaida and Kamsani, Noor Ain (2016) Multimode multiband power amplifier with tapped transformer for efficiency enhancement in low power mode. In: 12th IEEE International Conference on Semiconductor Electronics 2016 (ICSE2016), 17-19 Aug. 2016, Pullman Hotel, Bangsar, Kuala Lumpur. (pp. 268-271).

Tshubwana, Rembuluwani Phillip and Shongwe, Thokozani and Gomes, Chandima (2016) Characteristics and performance of soil, bentonite and conductive cement during impulse tests in Swaziland. In: IEEE International Conference on Emerging Technological Trends in Computing, Communications and Electrical Engineering (ICETT 2016), 21-22 Oct. 2016, Kollam, Kerala, India. .

Tuan Abdul Rahman, Tuan Ahmad Zahidi (2016) Parametric modelling of twin rotor system using chaotic fractal search algorithm. In: 2016 7th IEEE Control and System Graduate Research Colloquium (ICSGRC 2016), 8 Aug. 2016, UiTM Shah Alam, Selangor, Malaysia. (pp. 34-39).

Tuan Abdul Rahman, Tuan Ahmad Zahidi and Tokhi, Mohammad Osman (2016) Enhanced stochastic fractal search algorithm with chaos. In: 2016 7th IEEE Control and System Graduate Research Colloquium (ICSGRC 2016), 8 Aug. 2016, UiTM Shah Alam, Selangor, Malaysia. (pp. 22-27).

W. N., W. Rohizan and Mohd.Rafie, Azmin Shakrine and Harmin, Mohammad Yazdi and Ciang, Chia Chen (2016) Effect of surface roughness on helicopter main rotor blade. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-8).

Wan Ab. Karim Ghani, Wan Azlina and Fernandez, Praveen Shawn and Halele, Mohamad Qayyum and Sobri, Shafreeza and Jasni, Jasronita (2016) Physical and electrochemical characterization of palm kernel shell biochar (PKSB) as supercapacitor. In: 2016 3rd International Conference on Chemical and Food Engineering (ICCFE 2016), 8-9 Apr. 2016, Tokyo, Japan. (pp. 1-6).

Wan Ismail, Wan Ishak and Ibrahim, Bala and Suleiman, Samaila (2016) Mechanization of transplanting and weeding for rice intensification (SRI) for improved paddy yield in Malaysia. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 159-165).

Yap, Yuh Ming and Abdul Rahman, Russly and Chin, Nyuk Ling (2016) Mechanical and oxygen barrier properties of sodium caseinate edible film. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 184-191).

Yusof, T. N. T. and Wayayok, Aimrun and Saufi, M. K. M. (2016) Effect of fans and humidifier on temperature and relative humidity in cages. In: 3rd International Conference on Agricultural and Food Engineering (CAFEi 2016), 23-25 Aug. 2016, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 209-213).

Yusoff, Zubaida and Mohd Annuar, Fatahiyah and Kung, Fabian Wai Lee and Hashim, Shaiful Jahari and Lees, Jonathan and Cripps, Steve C. (2016) The effect of tracking generator efficiency to overall RF power amplifier system efficiency. In: 12th IEEE International Conference on Semiconductor Electronics 2016 (ICSE2016), 17-19 Aug. 2016, Pullman Hotel, Bangsar, Kuala Lumpur. (pp. 344-347).

Zaini, Nur Hazirah and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Ahmad, Nor Izzati and Mohd Radzi, Mohd Amran and Azis, Norhafiz and Wan Hasan, Wan Zuha (2016) On the effect of lightning on a solar photovoltaic system. In: 2016 33rd International Conference on Lightning Protection (ICLP), 25-30 Sept. 2016, Estoril, Portugal. .

Zakaria, Fazrul Faiz and Abdul Latiff, Nurul Adilah and Hashim, Shaiful Jahari and Ehkan, Phaklen and Rokhani, Fakhrul Zaman (2016) Cooperative virtual channel router for adaptive hardwired FPGA network-on-chip. In: 2016 IEEE Asia Pacific Conference on Circuits and Systems (APCCAS), 25-28 Oct. 2016, Jeju, South Korea. (pp. 358-361).

Newspaper

Law, Teik Hua Safe sense: local public buses should and can be safe. (24 February 2016), (Call Number: 2016/02-108)

Thesis

A., Syed Abdul Bari (2016) Design and simulation of piezoelectric micropump for a constant flow rate. Masters thesis, Universiti Putra Malaysia.

Abd Manab, Mohd Fairuz (2016) Mechanical properties of pultruded Kenaf fibre-reinforced vinyl ester composites. PhD thesis, Universiti Putra Malaysia.

Abd Rahman, Muhammad Syahmi (2016) Electrical performance of polymer-type insulators under various service and lightning voltage conditions. Masters thesis, Universiti Putra Malaysia.

Abdul Rahman, Nor Farahaida (2016) Shunt active power filter using hybrid fuzzy-proportional and crisp-integral control algorithms for total harmonic distortion improvement. Doctoral thesis, Universiti Putra Malaysia.

Abdulhamed, Ali Jaber (2016) Experimental investigation on shell tube condenser for portable solar water distiller system. Masters thesis, Universiti Putra Malaysia.

Abdullah, Mohd Yazid (2016) Development of on-farm structures and water delivery management model for improved rice irrigation practices, Tanjung Karang, Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Abdullahi, Saleh (2016) Development of hybrid land use change model for compact city assessment. Doctoral thesis, Universiti Putra Malaysia.

Abdulrahman, Ahmed Faris (2016) Handover enhancement in IP mobility for 6LoWPAN scenario. Masters thesis, Universiti Putra Malaysia.

Abdulrazzaq, Bilal Isam (2016) Design of a wide-range CMOS digital delay line with sub-picosecond jitter for image sensor applications. Doctoral thesis, Universiti Putra Malaysia.

Abdulshaheed, Ali Mohammed Ali (2016) Pipe leak detection and monitoring system using pressure residual method. Masters thesis, Universiti Putra Malaysia.

Abdulwahid, Waleed Mohammed (2016) Landslide vulnerability and risk assessment for multihazard scenarios using airborne laser scanning data. Masters thesis, Universiti Putra Malaysia.

Ahmad, Nor Izzati (2016) Electrical performance of monocrystalline and polycrystalline photovoltaic panels under lightning impulse voltage condition. Masters thesis, Universiti Putra Malaysia.

Ahmad Arshad, Khairil Izwan (2016) Development of a new LiDAR database management system using open source software. Masters thesis, Universiti Putra Malaysia.

Ahmad Nadzri, Ahmad Akmal (2016) Surface electromyography classification of hand motions using time domain features for real time application. Masters thesis, Universiti Putra Malaysia.

Ahmed, Riyadh Ibraheem (2016) Theoretical foundation and numerical analysis on Coandă effect for micro-air vehicle. Doctoral thesis, Universiti Putra Malaysia.

Ahmed Hatem, Sakher Ahmed (2016) A scalable reliable multicast transport protocol with advanced buffer management. Doctoral thesis, Universiti Putra Malaysia.

Al Khanjar, Karrar Naji Salman (2016) Coplanar UHF RFID tag antennna with u-shaped inductively coupled feed for metalic applications. Masters thesis, Universiti Putra Malaysia.

Al-Aqeel, Yousif Hashim Abdullah (2016) Optimization of operations of reservoir systems for hydropower generation in Tigris River Basin, Iraq. Doctoral thesis, Universiti Putra Malaysia.

Al-Musawi, Osamah Abdulhameed Kadhim (2016) Desalination of reverse osmosis effluent using integrated solar pond with solar still system. Masters thesis, Universiti Putra Malaysia.

Al-Qazwini, Yusser A. Taqi (2016) Design and fabrication of fiber-based surface plasmon resonance sensors. Doctoral thesis, Universiti Putra Malaysia.

Al-Shanoon, Abdulrahman Abdulkareem Sattoori (2016) Gripping controller design for a one-degree-of-freedom robotic hand model based on slip detection. Masters thesis, Universiti Putra Malaysia.

Alhamdawee, Ehsan Mohsin Obaid (2016) Efficiency improvement of a standalone photovoltaic system using fuzzy-based maximum power point tracking algorithm. Masters thesis, Universiti Putra Malaysia.

Ali, Fatin Syakirah (2016) Development of oil palm fruit bunch chopping machine for improving continuous sterilization process. Masters thesis, Universiti Putra Malaysia.

Ali, Muhammad Azhar (2016) Development of herbal-based orally disintegrating tablets from Moringa oleifera Lam. leaves. Masters thesis, Universiti Putra Malaysia.

Alkbir, Munir Faraj Almabrouk (2016) Crushing behavior and failure modes of kenaf fibre-reinforced composite hexagonal tubes. Doctoral thesis, Universiti Putra Malaysia.

Alrewashed, Abdulsalam Abdullah N. (2016) Application of integrated solar pond with evaporation system for heat generation to recover minerals in rejected brine. Doctoral thesis, Universiti Putra Malaysia.

Alsabahi, Hanaa Kadhim Kareem (2016) Harvesting energy potential from air conditioner compressor of hot gas receiver tank using thermoelectric generator. Masters thesis, Universiti Putra Malaysia.

Altaie, Mohamad A. Hasan (2016) Performance and emission evaluation of a single cylinder diesel engine running on palm oil methyl ester enriched with methyl oleate. Doctoral thesis, Universiti Putra Malaysia.

Amran, Mugahed Yahya Hussein (2016) Determination of structural behavior of precast foamed concrete sandwich panel. Doctoral thesis, Universiti Putra Malaysia.

Aqel, Mohammad O. A. (2016) Scale-invariant and adaptive-search template matching for monocular visual odometry in low-textured environment. Doctoral thesis, Universiti Putra Malaysia.

Ardestani, Seyed Mohsen Hashemi (2016) Removal of nitrate and sulfate from contaminated water using nanofiltration technology. Masters thesis, Universiti Putra Malaysia.

Asr, Mahdi Torabi (2016) Improved performance of H-darrieus vertical axis wind turbine with emphasis on start-up behavior. Masters thesis, Universiti Putra Malaysia.

Awwad, Samer Adnan Ali Bani (2016) 6LoWPAN header compresses with end-to-end hybrid route-over using cross-layer and adaptive backoff exponent. Doctoral thesis, Universiti Putra Malaysia.

Barakat, Hussein Mohammed (2016) A new discrete cosine transform-based energy detection scheme investigation using bartlett periodogram method in cognitive radio spectrum sensing. Masters thesis, Universiti Putra Malaysia.

Bashir, Muhammad Tariq (2016) Nitrate and fluoride adsorption from aqueous solution by chemically modified palm kernel shells. Doctoral thesis, Universiti Putra Malaysia.

Boroon, Mohammad (2016) Effect of gamma-gamma distribution on performance of optical differential 8-level phase shift keying in free space optical communication. Masters thesis, Universiti Putra Malaysia.

Buang, Nur Salihah (2016) Development and performance evaluation of a mechanical pomelo fruit juice extractor. Masters thesis, Universiti Putra Malaysia.

Chang, Jing Jing (2016) Sensitivity analysis and multi-model generalised predictive control of uncertain intravenous general anaesthesia system. Doctoral thesis, Universiti Putra Malaysia.

Cheong, Xiang Hou (2016) Effects of upstream square blockage on lift behaviour of a rotating cylinder. Masters thesis, Universiti Putra Malaysia.

Chin @ Hashim, Nur Fizura (2016) Frequency variation in non-destructive measurement of impedance of oil palm fruits for moisture and oil content determination. Masters thesis, Universiti Putra Malaysia.

Chng, Ming Hui (2016) Development of refrigerant (R32) flow maldistribution model for microchannel heat exchanger. Doctoral thesis, Universiti Putra Malaysia.

Chow, Yin Hui (2016) Partitioning behaviours and selective recovery of therapeutic protein in aqueous two-phase system. Doctoral thesis, Universiti Putra Malaysia.

Danial, Rabiatuladawiyah (2016) Removal of glyphosate from aqueous solution by electrocoagulation. Doctoral thesis, Universiti Putra Malaysia.

Darajeh, Negisa (2016) Phytoremediation of palm oil mill secondary effluent using vetiver system. Doctoral thesis, Universiti Putra Malaysia.

Daud, Mohd Shazwan (2016) Assessing intercity bus safety performance in Malaysia using a composite safety performance index. Masters thesis, Universiti Putra Malaysia.

Delgoshaei, Aidin (2016) Scheduling dynamic cellular manufacturing systems in the presence of cost uncertainty using heuristic method. Doctoral thesis, Universiti Putra Malaysia.

El-Hamad, Haneen Jawad Mahmoud (2016) Developing prosthetic artificial muscle actuator using dielectric elastomers. Masters thesis, Universiti Putra Malaysia.

Elamin, Wael Mohamed Abdalla (2016) Development of a pilot scale high pressure food processing system. Doctoral thesis, Universiti Putra Malaysia.

Epsipha, Pauline (2016) Performance characteristics in transonic axial compressor rotor blade using circular jets. Masters thesis, Universiti Putra Malaysia.

Erman, Fuad Naim Ahmed (2016) Split-ring resonator-based antenna with photonic band gap for UHF RFID tag. Masters thesis, Universiti Putra Malaysia.

Faisal, Ali Raed (2016) Efficient beamforming and spectral efficiency maximization in a joint transmission LTE-A system. Masters thesis, Universiti Putra Malaysia.

Fanos, Ali Mutar (2016) Rockfall hazard assessment based on airborne laser scanning data and GIS in tropical region. Masters thesis, Universiti Putra Malaysia.

Farhangi, Amirsaeed (2016) Clear water scour around submerged skewed bridge with and without pier. Doctoral thesis, Universiti Putra Malaysia.

Fasihnikoutalab, Mohammad Hamed (2016) Utilization of olivine for soil stabilization. Doctoral thesis, Universiti Putra Malaysia.

Fateh, Amir (2016) Assessment of proposed lateral resistance system used with framed structures. Doctoral thesis, Universiti Putra Malaysia.

Ghiasi, Maryam (2016) Drying performance of inclined bed dryer with air flow reversal and its effects on rice milling quality. Masters thesis, Universiti Putra Malaysia.

Ghorbani, Karim (2016) Modelling of interceptor drainage effect on water table and salinity levels in agricultural area of Abyek Plain Iran. Doctoral thesis, Universiti Putra Malaysia.

Hadi, Mahmaad Khalid (2016) Special protection and control scheme based on generation rescheduling using differential evolution and electromagnetism-like algorithm. Masters thesis, Universiti Putra Malaysia.

Hajighorbani, Shahrooz (2016) Dual search maximum power point algorithm based on mathematical analysis under partially-shaded conditions. Doctoral thesis, Universiti Putra Malaysia.

Hamid, Laith Emad (2016) Automated plant classification system using a hybrid of shape and color features of the leaf. Masters thesis, Universiti Putra Malaysia.

Hammad Thauri, Shahdura (2016) Viability of microwave hybrid sintering process for tungsten carbide cermets. Masters thesis, Universiti Putra Malaysia.

Hammadi, Ahmed Sahib (2016) Optimal location and size of distributed generation to reduce power losses and improve voltage profiles using differential evolution optimization method. Masters thesis, Universiti Putra Malaysia.

Hamzah, Azhar (2016) Experimental determination of safe service life of motorcycle helmet. Masters thesis, Universiti Putra Malaysia.

Hassoon, Mokhalad Khaleel (2016) Amplitude shift-keying demodulator circuit for bio-implantable micro-system stimulator. Masters thesis, Universiti Putra Malaysia.

Hussain, Intesar Razaq (2016) Preparation and evaluation of reduced graphite oxide for oil spill removal. Masters thesis, Universiti Putra Malaysia.

Hussein, Noor Sabeeh (2016) Energy trust system for detecting sybil attacks in clustered wireless sensor network. Masters thesis, Universiti Putra Malaysia.

Ibrahim, Omar Jabbar (2016) Multilevel multiresonator chipless radio frequency identification tags with high encoding capacity. Doctoral thesis, Universiti Putra Malaysia.

Idriss, Yahaya (2016) Performance analysis of different sac-ocdma codes for indoor visible light communication system. Masters thesis, Universiti Putra Malaysia.

Iqbal, Mujahid (2016) Dye-sensitized solar cell using local natural dye extract from Melastoma malabathricum L. fruit pulp. Masters thesis, Universiti Putra Malaysia.

Iroemeha C., Onwude Daniel (2016) Kinetic model of drying process of pumpkin (Cucurbita moschata duchesne ex poir.) in a convective hot air dryer. Masters thesis, Universiti Putra Malaysia.

Ishak, Nor Shafizah (2016) Microwave-assisted biodiesel production from domestic brown grease waste using sulphated-ferric oxide and potassium oxide-supported catalysts. Doctoral thesis, Universiti Putra Malaysia.

Ismail @ Dahlan, Hada Masayu (2016) Effects of microwave-vacuum drying on drying kinetics and quality of Orthosiphon aristatus (blume) Miq. Leaves and Eurycoma longifolia jack roots. Masters thesis, Universiti Putra Malaysia.

Jalo, Abdulmumini Salihu (2016) Optimizing physicochemical properties of recycled cooking palm oil using particle swarm optimization. Masters thesis, Universiti Putra Malaysia.

Jamil, Norazlida (2016) Husk, bacterial leaf blight, and weedy rice classification in paddy seeds using imaging techniques. Masters thesis, Universiti Putra Malaysia.

Jasim, Hassan Abdulhadi (2016) Effects of piston crown profiles on performance of a gasoline homogeneous charge compression ignition engine using computational fluid dynamics. Masters thesis, Universiti Putra Malaysia.

Jawad, Rana Jaafar (2016) Removal of iron and oil from palm oil mill effluent using chitosan coated alginate–mangrove composite beads. Masters thesis, Universiti Putra Malaysia.

Job Oluwatosin, Ojo-Kupoluyi (2016) Physical and mechanical properties of bilayer cemented tungsten carbide and steel fabricated through die compaction process. Masters thesis, Universiti Putra Malaysia.

Kadim, Emran Jawad (2016) Transformer health index assessment based on neural- fuzzy method utilising monte carlo simulation. Masters thesis, Universiti Putra Malaysia.

Kak, D-Wing (2016) Relationship between neck muscle activation and head-neck response in low velocity frontal collision. Masters thesis, Universiti Putra Malaysia.

Kamil, Faten Hameed (2016) Modified solid industrial waste as potential catalyst in pyrolysis. Masters thesis, Universiti Putra Malaysia.

Kamran, Mohtasham (2016) Development of a supplier selection risk management framework for Iranian automotive industry. Masters thesis, Universiti Putra Malaysia.

Kashkol, Mohaiman Jaffar (2016) Monotonic and fatigue properties of kenaf/glass fiber-reinforced hybrid composites. Masters thesis, Universiti Putra Malaysia.

Kazemian, Mohsen (2016) Deterministic phase sequence approach for peak to average power ratio reduction in orthogonal frequency division multiplexing systems. Doctoral thesis, Universiti Putra Malaysia.

Kek, Siok Peng (2016) Characterisation and identification of Malaysian raw honey origin. Doctoral thesis, Universiti Putra Malaysia.

Khajeh, Amin (2016) Effect of thermo-oxidative aging on properties of e- glass fiber-reinforced epoxy composites. Masters thesis, Universiti Putra Malaysia.

Khani, Parnia Zaki (2016) Physical and mechanical properties of bamboo-filled epoxy composites from selected Malaysian bamboo. Doctoral thesis, Universiti Putra Malaysia.

Khdhair, Zaid Hadi (2016) Image processing on intel edison microcontroller for pork detection. Masters thesis, Universiti Putra Malaysia.

Kheradmand, Behnam (2016) Effects of additives on rheological properties of warm mix asphalt. Doctoral thesis, Universiti Putra Malaysia.

Khmag, Asem Ib Mohamed (2016) Denoising of digital images using second generation wavelet transforms-hidden markov model. Doctoral thesis, Universiti Putra Malaysia.

Khoshkroudi, Soheil Nikpour (2016) Development of divergent viscous wall damper for framed structures under dynamic loading. Masters thesis, Universiti Putra Malaysia.

Kojouri, Samira Jilani (2016) Development of high volume POFA self-compacting concrete using colloidal nano silica as a viscosity modifying agent. Doctoral thesis, Universiti Putra Malaysia.

Kuje, Danjuma (2016) Optical fiber vibration sensor network based on multi-service optical code-division multiple-access system. Masters thesis, Universiti Putra Malaysia.

Lau, Lek Hang (2016) Oil palm empty fruit bunch carbonization in pilot scale and industrial scale horizontal rotary drums. Masters thesis, Universiti Putra Malaysia.

Lilehkoohi, Ali Hassanzadeh (2016) Optimization of material selection and thickness for crashworthiness of side doors of cars. Doctoral thesis, Universiti Putra Malaysia.

Lim, Bo Yuan (2016) Development of Jatropha fruit shelling machine for kernel recovery in biodiesel production. Doctoral thesis, Universiti Putra Malaysia.

M., Mohammed Serdah (2016) Effect of cam profiler and valve designs on engine efficiency. Doctoral thesis, Universiti Putra Malaysia.

Mahmoud, Dalia Khalid (2016) Utilization of biochars from wastes of thermochemical processes as adsorbents. Doctoral thesis, Universiti Putra Malaysia.

Maleki, Seyed Abbas Mousavi (2016) Estimation of global solar radiation on inclined surfaces. Masters thesis, Universiti Putra Malaysia.

Md Ali, Mas Izyani (2016) Optical fiber two-taper mach-zehnder interferometer as comb filter for multiwavelength laser generation. Doctoral thesis, Universiti Putra Malaysia.

Md Rosli, Mohd Anwarul Arif (2016) Investigation of different graphene oxides coated on tapered optical fiber sensor for aqueous ethanol detection. Masters thesis, Universiti Putra Malaysia.

Mehrjou, Mohammad Rezazadeh (2016) Broken rotor bar fault detection in line start-permanent magnet synchronous motor. Doctoral thesis, Universiti Putra Malaysia.

Mohamad, Hafizah (2016) Optimization of ultrashort pulse laser in ring-type erbium-doped fiber laser with single wall carbon nanotube saturable absorber. Masters thesis, Universiti Putra Malaysia.

Mohamad, Maizatul Akma (2016) Real time traceability module for halal logistic transportation using GPS and geofence technique. Masters thesis, Universiti Putra Malaysia.

Mohamad, Nur Aqilah (2016) An examination on the ageing performance of palm oil and coconut oil with consideration on the presence of insulation paper. Masters thesis, Universiti Putra Malaysia.

Mohamad, Nurhaniza (2016) Optimization of parameters for machining hybrid carbon/ epoxy and aluminum 2024 composite laminates. Doctoral thesis, Universiti Putra Malaysia.

Mohamad, Roslina (2016) Online bit error rate estimation-based stopping criterion for turbo decoding. Doctoral thesis, Universiti Putra Malaysia.

Mohamad, Siti Zubaidah (2016) Determination of voids in stone mastic asphalt mixtures using image- based technique. Masters thesis, Universiti Putra Malaysia.

Mohamad Idris, Aida Isma (2016) In-situ biofouling mitigation using ultrasonication in membrane bioreactor. Doctoral thesis, Universiti Putra Malaysia.

Mohamad Nor, Ahmad Redzman (2016) Conceptual design of vertical seat in commercial transport aircraft for static condition flight. Masters thesis, Universiti Putra Malaysia.

Mohamad Yusof, Umi Kalsom (2016) Development of e-nose herb recognition system based on artificial intelligence techniques. Masters thesis, Universiti Putra Malaysia.

Mohamad Zaber, Nursaida (2016) Optimal PID tuning based on slope variation approach for position control of radio telescope. Masters thesis, Universiti Putra Malaysia.

Mohamed Halip, Nor Hafizah (2016) Single longitudinal mode fiber laser with integration of gallium-erbium co-doped fiber. Masters thesis, Universiti Putra Malaysia.

Mohammaddoost, Fatemeh (2016) Physicochemical properties and bioactivity of hydroxyapatite/zirconia biocomposite prepared by ball milling. Masters thesis, Universiti Putra Malaysia.

Mohammed, Kachalla (2016) A modified strength capacity for composite slab using reliability approach. Doctoral thesis, Universiti Putra Malaysia.

Mohammed, Maan Hameed (2016) Low power text compression using Huffman coding with power management controller. Masters thesis, Universiti Putra Malaysia.

Mohammed, Mohammed Idris (2016) Implementing numerical simulation for static and dynamic loading of cable-stayed Penang Bridge. Doctoral thesis, Universiti Putra Malaysia.

Mohammed, Salahu Hamza (2016) Gis-based modified drastic model for pollution vulnerability assessment in Kano, Nigeria. Doctoral thesis, Universiti Putra Malaysia.

Mohd Basri, Mohd Salahuddin (2016) Development of rice husk ash-based geopolymer binder for fire resistant coating. Doctoral thesis, Universiti Putra Malaysia.

Mohd Hanif, Hani Afiffa (2016) Performance of UVC irradiation with dean vortex technology on clear and turbid tamarind (Tamarindus indica l.) juice. Masters thesis, Universiti Putra Malaysia.

Mohd Jamal, Qistina (2016) Validation of low velocity impact on a biocomposite flat plate laminates. Masters thesis, Universiti Putra Malaysia.

Mohd Nor, Shamsul Fahmi (2016) Breakdown characteristics and dielectric properties of palm oil and coconut oil based tio2 nanofluids. Masters thesis, Universiti Putra Malaysia.

Mohd Yusof, Norbazlan (2016) Development of landslide risk maps using high resolution airborne LiDAR data. Doctoral thesis, Universiti Putra Malaysia.

Mohmad Ali, Ishak (2016) Development of ship propeller using dynamic casting method. Doctoral thesis, Universiti Putra Malaysia.

Mokri, Siti Salasiah (2016) Improvement of thoracic hybrid PET/CT registration using hybrid feature with combined intensity multimodal demon with PET sinogram filtering. Doctoral thesis, Universiti Putra Malaysia.

Muawiya, Abubakar Kaigama (2016) Domestic grid-friendly appliance controller with demand response for underfrequency load shaving. Masters thesis, Universiti Putra Malaysia.

Muhamad, Mohd Izhwan (2016) Sizing of biomass and solar photovoltaic hybrid renewable energy system for tropical climate. Masters thesis, Universiti Putra Malaysia.

Muhammad Nasir, Ismail (2016) Anaerobic digestion for cattle manure treatment and its kinetic modelling in an oscillatory flow biogas reactor. Masters thesis, Universiti Putra Malaysia.

Muhssen, Hassan Sadah (2016) Numerical simulation of mixing characteristics of CNG-air mixer for dual-fuel vehicle. Masters thesis, Universiti Putra Malaysia.

Muneer, Syed Muhammad (2016) Design and fabrication of three-phase flux switching permanent magnet linear generator for wave energy harvesting. Masters thesis, Universiti Putra Malaysia.

Murtadha, Muayad Khalil (2016) Cross layer design of network- based fully distributed mobility management for heterogeneous wireless networks. Doctoral thesis, Universiti Putra Malaysia.

Musa, Baktiar (2016) Investigation of tapered optical fiber transmission properties for sensing applications. Doctoral thesis, Universiti Putra Malaysia.

Mushgil, Baydaa Mohammad (2016) An efficient method for audio watermarking using SWT and mean value quantization. Masters thesis, Universiti Putra Malaysia.

Mustapha, Ibrahim (2016) A reinforcement learning-based energy-efficient spectrum-aware clustering algorithm for cognitive radio wireless sensor network. Doctoral thesis, Universiti Putra Malaysia.

Naeem, Nadeem (2016) Highly sensitive metamaterial biosensor operating in the terahertz regime. Doctoral thesis, Universiti Putra Malaysia.

Nafea, Safa Nassr (2016) Point-to-point multilayer antenna design for gain and bandwidth improvement for ism 5.8 GHz. Masters thesis, Universiti Putra Malaysia.

Najafabadi, Seyed Abdolrahman Mousavian (2016) Design of cloud-enabled cross-platform malware analysis systems. Masters thesis, Universiti Putra Malaysia.

Nehzati, Seyedeh Sheida (2016) Steganography in webpages using CSS color attributes enhanced by rule-based system. Masters thesis, Universiti Putra Malaysia.

Nfawa, Sadeq Rashid (2016) Numerical investigation on heat transfer enhancement in a double pipe heat exchanger using rod inserts and nanofluids. Masters thesis, Universiti Putra Malaysia.

Ng, Tan Ching (2016) Determining lean manufacturing effectiveness in Malaysia using hybrid interpretive structural and structural equation models. PhD thesis, Universiti Putra Malaysia.

Noori, Noor Mohammed (2016) Hybrid grating bowtie antenna based on metamaterial structures and cavity-backed reflector for high gain wideband applications. Masters thesis, Universiti Putra Malaysia.

Panjehfouladgaran, Hamid Reza (2016) A risk management evaluation framework for reverse logistics organizations using failure mode and effect analysis and multi criteria decision making. Doctoral thesis, Universiti Putra Malaysia.

Parveen, Sajida (2016) Liveness detection in facial biometrics using complete dynamic local ternary pattern technique. Doctoral thesis, Universiti Putra Malaysia.

Punithavathi, Thirunavakkarasu (2016) Development of fiber bragg grating-based ethanol sensors using nanostructured sensitive layers. Doctoral thesis, Universiti Putra Malaysia.

Quzwain, Kamelia M. Chatib (2016) A high gain microstrip yagi antenna with large bandwidth at frequency of 5.8 GHZ. Masters thesis, Universiti Putra Malaysia.

Ramalu, Tanaselan (2016) Photovoltaic-based single-ended primary-inductor converter with dual-fuzzy logic control-based maximum power point tracking. Masters thesis, Universiti Putra Malaysia.

Ramli, Rosmamuhamadani (2016) Characterization and mechanical properties of in-situ titanium diboride fibre reinforced aluminium-copper alloy composites. Doctoral thesis, Universiti Putra Malaysia.

Rasit, Nazaitulshila (2016) Enhancement of methane production from anaerobic digestion of grease trap waste. Doctoral thesis, Universiti Putra Malaysia.

Razali, Nadlene (2016) Development and characterization of roselle fibre reinforced vinyl ester composites. Masters thesis, Universiti Putra Malaysia.

Richard, Adesiji Adeolu (2016) Groundwater quality and quantity, and irrigation requirement for oil palm plantations in peat swamp, south Selangor, Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Roslan, Jumardi (2016) Optimization and enzymatic hydrolysis of Tilapia by-product and fractionation of protein hydrolysate using membrane ultrafiltration. Doctoral thesis, Universiti Putra Malaysia.

Roslan, Muhammad Kamil (2016) Development of magnetic imaging system for shape identification based on GMR sensor array. Masters thesis, Universiti Putra Malaysia.

Saadat, Kimia (2016) Oil palm fruit ripeness classification using optical-based colour sensor. Masters thesis, Universiti Putra Malaysia.

Saalah, Sariah (2016) Synthesis and characterisation of jatropha oil-based waterborne polyurethane dispersions. Doctoral thesis, Universiti Putra Malaysia.

Salih, Rabar Fatah (2016) Influence of potassium, boron and zinc on growth, yield and fiber quality of two kenaf (Hibiscus caccabinus L.) varieties. Doctoral thesis, Universiti Putra Malaysia.

Salka, Tanko Daniel (2016) Integrated face detection approach for far image application. Masters thesis, Universiti Putra Malaysia.

Samani, Mahmoud Asad (2016) Development of a conceptual framework to integrate quality management system and risk management system. PhD thesis, Universiti Putra Malaysia.

Samavati, Raheleh (2016) Use of cassava derivative in water based drilling mud. Doctoral thesis, Universiti Putra Malaysia.

Sami, Mahmoud (2016) Energy-efficient medium access control strategy for cooperative wireless networks. Doctoral thesis, Universiti Putra Malaysia.

Samsudin, Sarah Hanim (2016) Spectral discrimination and index development of roofing materials and conditions using field spectroscopy and worldview-3 satellite image. Masters thesis, Universiti Putra Malaysia.

Shojanoori, Razieh (2016) Object-based imagery analysis for automatic urban tree species detection using high resolution satellite image. Doctoral thesis, Universiti Putra Malaysia.

Sivaraj, Lalitha (2016) Development of microweir structure by lithographic fabrication process for malaria cell separation. Masters thesis, Universiti Putra Malaysia.

Srazhidinov, Radik (2016) Nlfxlms and thf-nlfxlms algorithms for wiener-hammerstein nonlinear active noise control. Masters thesis, Universiti Putra Malaysia.

Syed Zahurul, Islam (2016) Incorporating decentralized renewable energy in smart grid using Zigbeepro. Doctoral thesis, Universiti Putra Malaysia.

Talebpour, Faraz (2016) Digital quadrature compensators scheme for analog imperfections of quadrature modulator in wireless communication systems. Masters thesis, Universiti Putra Malaysia.

Tan, Kean Sheng (2016) Computational modelling of small motorcycle crashes and experimental validation. Doctoral thesis, Universiti Putra Malaysia.

Tarmidi, Mohammad Zakri (2016) Enabling marine spatial data sharing in Malaysia using a collaboration model. Doctoral thesis, Universiti Putra Malaysia.

Tengku Ibrahim, Tengku Muhammad Fahmi (2016) Parametric study of portable solar-powered heat exchanger using computational fluid dynamics. Masters thesis, Universiti Putra Malaysia.

Thangasamy, Veeraiyah (2016) Design and evaluation of multimode multiband power amplifier in 130nm CMOS process. Doctoral thesis, Universiti Putra Malaysia.

Thien, Yee Von (2016) Lightning impulse breakdown performances of palm oil and coconut oil under non-uniform field. Masters thesis, Universiti Putra Malaysia.

Vaghei, Ramin (2016) Structural assessment of a proposed precast wall connection under combined loading. Doctoral thesis, Universiti Putra Malaysia.

Velu, Vengadeshwaran (2016) Design and implementation of a single-phase to three-phase space-vector pwm-based matrix converter system for induction motor drives. Doctoral thesis, Universiti Putra Malaysia.

Wahhad, Ali Mohamad (2016) Development of optimum window size in tropical climate using computational fluid dynamics and experimental works. Doctoral thesis, Universiti Putra Malaysia.

Wong, Mei Lin (2016) Evaluation of anthocyanins extraction from Gynura crepioides Benth. using conventional method. Masters thesis, Universiti Putra Malaysia.

Yaakob, Mohd Saffuan (2016) Auxetic cell structure as an impact absorbing material in bio-composite aero helmet. Masters thesis, Universiti Putra Malaysia.

Yousif, Siba Monther (2016) A complexity-reduced digital predistortion for radio frequency power amplifier. Doctoral thesis, Universiti Putra Malaysia.

Zadeh, Hossein Ghapanchi (2016) Influence of surface electromyography electrode placement on signal accuracy at forearm muscles during wrist movements. Masters thesis, Universiti Putra Malaysia.

Zainul Abidin, Nur Sofuwani (2016) Recovery of low lactose goat's milk using cross-flow ultrafiltration membran. Masters thesis, Universiti Putra Malaysia.

Zamri, Ruzaidi (2016) Surface defect detection and polishing parameter optimization using image processing for G3141 cold rolled steel. Doctoral thesis, Universiti Putra Malaysia.

Zolfaghari, Sahar (2016) Intelligent fault diagnosis for broken rotor bar using wavelet packet signature analysis. Masters thesis, Universiti Putra Malaysia.

Zubairu, Usman Bashar (2016) Design and development of sri single seedling transplanting implement with seedlings in semi-dried clay media. Doctoral thesis, Universiti Putra Malaysia.

Zulkifl, Zareen (2016) Paddy growth monitoring and yield estimation using terrestrial laser scanner. Masters thesis, Universiti Putra Malaysia.

This list was generated on Mon Dec 23 11:13:27 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0