Items where Division is "Faculty of Engineering" and Year is 2019

Group by: Creators | Item Type | No Grouping

Number of items: 819.

Zainol Murad, Sohiful Anuar and Karim, Jamilah and Kamsani, Noor’Ain and Harun, Azizi, eds. (2019) Analog & RF circuits: design & implementation. Universiti Malaysia Perlis, Malaysia. ISBN 9789670922751

A Rahim, Syakura and Gomes, Chandima and Trengove, Estelle and Ab Kadir, Mohd Zainal Abidin (2019) Public beliefs about lightning in Malaysia. In: 15th International Symposium on Lightning Protection (SIPDA 2019), 30 Sept.-4 Oct. 2019, Sao Paulo, Brazil. .

A Rahim, Syakura and Izadi, Mahdi and Osman, Miszaina and Ab Kadir, Mohd Zainal Abidin and Abu Bakar, Elistina and Gomes, Chandima and Jasni, Jasronita (2019) On the comparison of lightning fatality rates between states in Malaysia from 2008-2019. In: 11th Asia-Pacific International Conference on Lightning (APL 2019), 12-14 June 2019, Hong Kong, China. .

A. A., Nuraini and S., Salmi and A. A., Hairuddin (2019) Energy audit of subcritical plant performance with different types of subbituminous coal. Journal of Mechanical Engineering Research and Developments, 42 (4). pp. 264-268. ISSN 1024-1752

A.Rahman, Mahadhir (2019) Analysis of aerodynamic performance through flow simulation on x-plane with store-x. Masters thesis, Universiti Putra Malaysia.

Ab Jalil, Habibah and Ismail, Alyani and Ab Aziz, Sidek and Atan, Hanafi and Alias, Abd Karim and Nordin, Norazah and Bakar, Norasiken and Alsagoff, Zaid Ali and Md. Saad, Mohd Nazri (2019) Evaluation of Malaysia MOOCs development: from the student perspective. In: The Impact of MOOCs on Online Education in Malaysia and Beyond. Routledge, New York, 184 - 195. ISBN 0367661284/9780367661281; EISBN: 9780429398476

Ab. Latif, Farah Ezzah and Zainal Abidin, Zurina and Cardona, Francisco and Awang Biak, Dayang Radiah and Md. Tahir, Paridah and Abdan, Khalina and Liew, Kan Ern (2019) Physicochemical, structural and mechanical evaluation of bio-based epoxidized jatropha oil blended with amine-cured epoxy resin as new hybrid matrix. Journal of Engineering Science and Technology, 14 (2). pp. 1071-1087. ISSN 1823-4690

Abang Mohamad Mohtar, Abang Mohamad Aizuddin and Abdul Jalil, Nawal Aswan and Md Rezali, Khairil Anas and Ng, Yee Guan (2019) Development of vibration test system to measure human biodynamic responses to hand-transmitted vibration (HTV). Journal of Physics: Conference Series, 1262. pp. 1-9. ISSN 1742-6588; ESSN: 1742-6596

Abang Zaidel, Dayang Norulfairuz and Muhamad, Ida Idayu and Mohd Daud, Nurul Shafinas and Abdul Muttalib, Nor Azyati and Khairuddin, Nozieana and Md Lazim, Nurul Asmak (2019) Production of biodiesel from rice bran oil. In: Biomass, Biopolymer-Based Materials and Bioenergy: Construction, Biomedical and other Industrial Applications. Composites Science and Engineering . Woodhead Publishing, United Kingdom, 409 - 448. ISBN 9780081024263

Abas, Mohd Firdaus (2019) Numerical investigation of Kingfisher’s wing under multi-phase flight for micro-aerial-vehicle. Doctoral thesis, Universiti Putra Malaysia.

Abbas, Bahaa and Khamas, Salam K. and Ismail, Alyani and Sali, Aduwati (2019) Full-embroidery designed electro-textile wearable tag antenna for WBAN application. Sensors, 19 (11). art. no. 2470. pp. 1-11. ISSN 1424-8220

Abbas, Hamzah Fadhil (2019) Fully automated bone age assessment using bag of features on hand radiograph images. Masters thesis, Universiti Putra Malaysia.

Abbas, Mohammed Fadil (2019) Structural, thermal, optical and dielectric studies on rare earth ion-doped borate glasses for solid state laser application. Doctoral thesis, Universiti Putra Malaysia.

Abd Aziz, Azizul Rahman (2019) Simulation-based evaluation of upper limb postures across range of motion through muscle activity and energy expenditure. Doctoral thesis, Universiti Putra Malaysia.

Abd Kharim, Muhammad Nurfaiz and Wayayok, Aimrun and Mohamed Shariff, Abdul Rashid and Abdullah, Ahmad Fikri (2019) Preliminary study of variable rate application – organic liquid fertilizer by using SPAD chlorophyll meter on System of Rice Intensification (SRI) cultivation. Communications in Soil Science and Plant Analysis, 50 (5). pp. 639-649. ISSN 0010-3624; ESSN: 1532-2416

Abd Kharim, Muhammad Nurfaiz and Wayayok, Aimrun and Mohamed Shariff, Abdul Rashid and Abdullah, Ahmad Fikri and Mohd Husin, Ezrin (2019) Droplet deposition density of organic liquid fertilizer at low altitude UAV aerial spraying in rice cultivation. Computers and Electronics in Agriculture, 167. art. no. 105045. ISSN 0168-1699

Abd Mubin, Nurulain and Nadarajoo, Eiswary and Mohd Shafri, Helmi Zulhaidi and Hamedianfar, Alireza (2019) Young and mature oil palm tree detection and counting using convolutional neural network deep learning method. International Journal of Remote Sensing, 40 (19). pp. 7500-7515. ISSN 0143-1161; ESSN 1366-5901

Abd Murat, Noor Azammi and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan (2019) Structural modelling on automotive engine mounting from kenaf fiber reinfoced natural rubber/thermoplastic polyurethane green composites. International Journal of Recent Technology and Engineering, 8 (2 spec. 4). pp. 445-449. ISSN 2277-3878

Abd Rahman, Muhammad Syahmi and Ab Kadir, Mohd Zainal Abidin and Abd. Rahman, Muhamad Safwan and Osman, Miszaina and Mohd Nor, Shamsul Fahmi (2019) Lightning impulse strength of 275 kV and 132 kV tower with composite crossarm. In: 11th Asia-Pacific International Conference on Lightning (APL 2019), 12-14 June 2019, Hong Kong, China. .

Abd Rahman, Nur 'Aliaa and Muhamad Parid, Dzieda and Abdul Razak, Siti Zubaidah and Mat Johari, Amiruddin and Talib, Ahmad Tarmezee and P. Mohammed, Mohd Afandi and Samsu Baharuddin, Azhari and Wakisaka, Minato (2019) In-situ viscoelastic characterization and modeling of ice cream. Journal of Food Engineering, 263. pp. 96-101. ISSN 0260-8774

Abd Rahman, Nur Farhana and Ismail, Amin and Abdul Karim Shah, Nor Nadiah and Varith, Jaturapatr and Shamsudin, Rosnah (2019) Effect of drying temperature on Malaysia pomelo (Citrus grandis (L.) Osbeck) pomace residue under vacuum condition. Pertanika Journal of Science & Technology, 27 (S1). pp. 57-66. ISSN 0128-7680; ESSN: 2231-8526

Abd Rahman, Nur Farhana and Shamsudin, Rosnah and Ismail, Amin and Abdul Karim Shah, Nor Nadiah and Varith, Jaturapatr (2019) Physicochemical properties of pomelo (Citrus grandis L. Osbeck) byproducts. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 126-129).

Abd Rasid, N. S. and Naim, Mohd Nazli and Che Man, Hasfalina and Abu Bakar, Noor Fitrah and Mokhtar, Mohd Noriznan (2019) Evaluation of surface water treated with lotus plant; Nelumbo nucifera. Journal of Environmental Chemical Engineering, 7 (3). pp. 1-7. ISSN 2213-2929; ESSN: 2213-3437

Abd Wahab, Nurul Husna and Kamarudin, Suryani (2019) HAZOP analysis and reliability assessment of closed loop solar water heater system for residential application. Journal of Occupational Safety and Health (JOSH), 16 (1). pp. 33-44. ISSN 1675-5456

Abdallah Al-Oran, Abdallah Adnan and Safiee, Nor Azizi and Mohd. Nasir, Noor Azline (2019) Fresh and hardened properties of self-compacting concrete using metakaolin and GGBS as cement replacement. European Journal of Environmental and Civil Engineering, 26 (1). pp. 379-392. ISSN 1964-8189; ESSN: 2116-7214

Abdeldjouad, Lokmane and Asadi, Afshin and Nahazanan, Haslinda and Kim Huat, Bujang and Dheyab, Wisam and Elkhebu, Ahmed G. (2019) Effect of clay content on soil stabilization with alkaline activation. International Journal of Geosynthetics and Ground Engineering, 5. art. no. 4. pp. 1-8. ISSN 2199-9260; ESSN: 2199-9279

Abdelkader, Hassani and Hussain, Siti Aslina and Abdullah, Norhafizah and Kamarudin, Suryani and Rosli, Rozita (2019) Antioxidant potential and Angiotensin-Converting Enzyme (ACE) inhibitory activity of orotic acid-loaded gum arabic nanoparticles. AAPS PharmSciTech, 20 (2). art. no. 53. pp. 1-9. ISSN 1530-9932

Abdelkader, Hassani and Hussain, Siti Aslina and Abdullah, Norhafizah and Kamarudin, Suryani and Rosli, Rozita (2019) Characterization of magnesium orotate-loaded chitosan polymer nanoparticle for drug delivery system. Chemical Engineering & Technology, 42 (9). pp. 1816-1824. ISSN 0930-7516; ESSN: 1521-4125

Abdul Aziz, Mohd Hamim and Bejo, Siti Khairunniza and Hashim, Fazirulhisyam and Ramli, Nur Hidayah and Ahmad, Desa (2019) Evaluations of soil resistivity in relation to basal stem rot incidences using soil moisture sensor. Pertanika Journal of Science & Technology, 27 (S1). pp. 225-234. ISSN 0128-7680; ESSN: 2231-8526

Abdul Aziz, Nur Haziqah and Jaafar, Haslina and Mohd Sidek, Roslina and Shafie, Suhaidi and Hamidon, Mohd Nizar (2019) Raman study on dispersion of carbon nanotube in organic solvent as the preparation of conductive nano-ink. In: 2019 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), 21-23 Aug. 2019, Putrajaya, Malaysia. (pp. 53-56).

Abdul Aziz, Siti Aishah and Loh, Jia Ling and Ahmad Saad, Fathinul Fikri and Nordin, Abdul Jalil and Ibrahim, Normala and Nuruddin, Arlina and Tunan, Elinda and Rosalina and Saripan, M. Iqbal and Suppiah, Subapriya (2019) Voxel-wise analysis of 18F-fluorodeoxyglucose metabolism in correlation with variations in the presentation of Alzheimer’s disease: a clinician’s guide. Medical Journal of Indonesia, 28 (3). pp. 300-308. ISSN 0853-1773;ESSN: 2252-8083

Abdul Jalil, Falil Nisa (2019) Influence of kenaf and coir fibers in problematic soil for road works. Masters thesis, Universiti Putra Malaysia.

Abdul Karim Shah, Nor Nadiah and Mohd Supian, Nur Amira and Hussein, Nadia Aida (2019) Disinfectant of pummelo (Citrus Grandis L. Osbeck) fruit juice using gaseous ozone. Journal of Food Science and Technology, 56 (1). pp. 262-272. ISSN 0022-1155; ESSN: 0975-8402

Abdul Karim Shah, Nor Nadiah and Sulaiman, Alifdalino and Sidek, N. S. M. and Supian, N. A. M. (2019) Quality assessment of ozone-treated citrus fruit juices. International Food Research Journal, 26 (5). pp. 1405-1415. ISSN 1985-4668; ESSN: 2231-7546

Abdul Khalid, Najeeb and Mohd Tohir, Mohd Zahirasri and Md Said, Mohamad Syazarudin (2019) Consequence simulation of jet fire due to leakage of pipelines in a natural gas power in Malaysia. PERINTIS eJournal, 9 (1). pp. 15-29. ISSN 2232-0725

Abdul Murat, Noor Azammi (2019) Kenaf-filled thermoplastic polyurethane-natural rubber composite for automotive engine rubber mount. Doctoral thesis, Universiti Putra Malaysia.

Abdul Rahman, Abdul Azim (2019) Development of post conditioning injection molding process control on glass filled nylon (polyamide 6) composites for global product engineering. Doctoral thesis, Universiti Putra Malaysia.

Abdul Raof, Nurliyana and Yunus, Robiah and Rashid, Umer and Azis, Norhafiz and Yaakub, Zaini (2019) Effect of molecular structure on oxidative degradation of ester based transformer oil. Tribology International, 140. ISSN 0301-679X

Abdul Raof, Nurliyana and Yunus, Robiah and Rashid, Umer and Azis, Norhafiz and Yaakub, Zaini (2019) Effects of molecular structure on the physical, chemical, and electrical properties of ester-based transformer insulating liquids. Journal of the American Oil Chemists' Society, 96 (5). pp. 607-616. ISSN 0003-021X

Abdul Raof, Nurliyana and Yunus, Robiah and Rashid, Umer and Azis, Norhafiz and Yaakub, Zaini (2019) Effects of molecular structure on the physical, chemical, and electrical properties of ester‐based transformer insulating liquids. Journal of the American Oil Chemists' Society, 96 (5). pp. 607-616. ISSN 0003-021X; ESSN: 1558-9331

Abdul Razak, Tajul Adli and Baharudin, B. T. Hang Tuah and Shafee, Khairul Shahril and Shamsuddin, Khairul Akmal (2019) Application of a portable coordinate measuring machine onto automotive door panel for quality inspection activity. In: Advanced Engineering for Processes and Technologies. Springer, Switzerland, 25 - 36. ISBN 9783030056209

Abdul Wahit, Mohamad Aizat (2019) Development of electromyography-controlled 3D printed robot hand and supervised machine learning for signal classification. Masters thesis, Universiti Putra Malaysia.

Abdulazeez, Omar Saud (2019) Optimized one-way electric vehicle carsharing system in campus environment using heterogeneous non-dominated sorting genetic algorithm II. Masters thesis, Universiti Putra Malaysia.

Abdulhameed, Abdullah and Mohtar, Mohd Nazim and Hamidon, Mohd Nizar and Abdul Halin, Izhal (2019) ITO islands as floating electrodes to deposit aligned carbon nanotubes for photovoltaic applications. In: 2019 IEEE 9th International Nanoelectronics Conferences (INEC), 3-5 July 2019, Kuching, Sarawak. .

Abdulhameed, Ali Ahmed (2019) Forward scattering radar for real-time detection of human activities and fall classification. Doctoral thesis, Universiti Putra Malaysia.

Abdulhussain, Sadiq H. and Ramli, Abd Rahman and Mahmmod, Basheera M. and Saripan, Mohd Iqbal and Al-Haddad, Syed Abdul Rahman and Jassim, Wissam A. (2019) Shot boundary detection based on orthogonal polynomial. Multimedia Tools and Applications, 78 (14). pp. 20361-20382. ISSN 1380-7501; ESSN: 1573-7721

Abdulhussain, Sadiq H. and Ramli, Abdul Rahman and Mahmmod, Basheera M. and Saripan, M. Iqbal and Syed Mohamed, Syed Abdul Rahman Al-Haddad and Baker, Thar and Flayyih, Wameedh Nazar and Jassim, Wissam A. (2019) A fast feature extraction algorithm for image and video processing. In: International Joint Conference on Neural Networks (IJCNN 2019), 14-19 July 2019, Budapest, Hungary. (pp. 1-8).

Abdulkadir, Tukur Daiyabu (2019) Design and development of a seeding machine for system of rice intensification seedling tray. Doctoral thesis, Universiti Putra Malaysia.

Abdulkadir, Tukur Daiyabu and Mahadi @ Othman, Muhammad Razif and Wayayok, Aimrun and Mohd Kassim, Muhamad Saufi (2019) Operational parameters affecting pneumatic paddy seeds. Agricultural Engineering International: CIGR Journal, 21 (2). pp. 59-69. ISSN 1682-1130

Abdulkadir, Tukur Daiyabu and Mahadi @ Othman, Muhammad Razif and Wayayok, Aimrun and Mohd Kassim, Muhamad Saufi (2019) Optimization of vacuum manifold design for seeding of SRI seedling tray. Cogent Engineering, 6 (1). art. no. 1681245. pp. 1-20. ISSN 2331-1916

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin (2019) Sustainability issues in hole making technologies: current practices and challenges. In: Hole Making and Drilling Technology for Composites: Advantages, Limitations and Potential,. Woodhead Publishing, Cambridge, United Kingdom, 149 - 160. ISBN 9780081023976

Abdullah, Ahmad Fikri and Wayayok, Aimrun and Nasidi, N. M. and S. A. F., K. Hazari and Mohd Sidek, Lariyah and Selamat, Zalilah (2019) Modelling erosion and landslides induced by farming activities at hilly areas, Cameron Highlands, Malaysia. Jurnal Teknologi, 81 (6). pp. 195-204. ISSN 2180-3722

Abdullah, Ermira Junita and Gaikwad, Priyanka Subhash and Abang Abdul Majid, Dayang Laila and Mohd Rafie, Azmin Shakrine (2019) Effect of sensor location of smart composite plate system on feedback control performance. Electronics Science Technology and Application, 6 (1). pp. 1-13. ISSN 2251-2608; ESSN: 2424-8460

Abdullah, Luqman Chuah and Zolfaghari, Reza and Awang Biak, Dayang Radiah and Rudiman, Shahidan (2019) Cationic surfactants for demulsification of produced water from alkaline-surfactant-polymer flooding. Energy & Fuels, 33 (1). pp. 115-126. ISSN 0887-0624; ESSN: 1520-5029

Abdullah, Mohd Na’im and Muda, Mohd Khairul Hafiz and Mustapha, Faizal and Mohd Alim, Mohd Shamsul Azmi and Ismail, Mohd Halim Shah (2019) The surface hardness of mild steel and plywood coated with different blending ratio of rice husk ash-based geopolymer. International Journal of Recent Technology and Engineering, 8 (3). pp. 1849-1853. ISSN 2277-3878

Abdullah, Najidah (2019) Application of shortwave near infrared spectroscopy in determining physicochemical properties of jackfruit. Masters thesis, Universiti Putra Malaysia.

Abdullah, Najidah and Mat Nawi, Nazmi and Ding, Phebe and Mohd Kassim, Muhamad Saufi and Mat Lazim, Siti Saripa Rabiah (2019) Preliminary study to predict moisture content of jackfruit skin using shortwave near infrared spectroscopy. Food Research, 3 (2). art. no. https://www.myfoodresearch.com/uploads/8/4/8/5/84855864/_7__fr-2018-135.r1_abdullah_2.pdf. pp. 128-132. ISSN 2550-2166

Abdullah, Nurul Hidayah and Shameli, Kamyar and Abdullah, Ezzat Chan and Abdullah, Luqman Chuah (2019) Solid matrices for fabrication of magnetic iron oxide nanocomposites: synthesis, properties, and application for the adsorption of heavy metal ions and dyes. Composites Part B: Engineering, 162. pp. 538-568. ISSN 1879-1069

Abdullah, Zalizawati and Othman, Mohamad Hakimi and Taip, Farah Saleena (2019) Neural network based adaptive PID controller of nonlinear heat exchanger. In: 2019 IEEE 9th International Conference on System Engineering and Technology (ICSET 2019), 7 Oct. 2019, Shah Alam, Selangor, Malaysia. (pp. 453-458).

Abdulrahman, Ahmed Shamil (2019) Synthesis of bimetallic catalysts supported on activated carbon for fischer-tropsch reaction. Doctoral thesis, Universiti Putra Malaysia.

Abdulredha, Murtada Mohammed (2019) Demulsification efficiency of water-in-oil emulsion using non-ionic surfactants. Masters thesis, Universiti Putra Malaysia.

Abdulredha, Murtada Mohammed and Hussain, Siti Aslina and Abdullah, Luqman Chuah (2019) Separation emulsion via non-ionic surfactant: an optimization. Processes, 7 (6). art. no. 382. pp. 1-18. ISSN 2227-9717

Abdulwahhab, Mohanad Mazin (2019) Seamless vertical handover technique for vehicular ad-hoc networks using artificial bee colony-particle swarm optimisation. Masters thesis, Universiti Putra Malaysia.

Abed, Alaaeddin M. H. (2019) Development and characterization of sugar palm fiber-reinforced polymer composites for photovoltaic backsheet material. Doctoral thesis, Universiti Putra Malaysia.

Abed, Alaaeddin M. H. and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and E. S., Zainudin and Al-Oqla, Faris M. (2019) Lightweight and durable PVDF-SSPF composites for photovoltaics backsheet applications: thermal, optical and technical properties. Materials, 12 (13). art. no. 2104. pp. 1-19. ISSN 1996-1944

Abed, Alaaeddin M. H. and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams and Al-Oqla, Faris M. (2019) Development of photovoltaic module with fabricated and evaluated novel backsheet-based biocomposite materials. Materials, 12 (18). art. no. 3007. pp. 1-15. ISSN 1996-1944

Abed, Alaaeddin M. H. and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams and Al-Oqla, Faris M. (2019) Lightweight and durable PVDF–SSPF composites for photovoltaics backsheet applications: thermal, optical and technical properties. Materials, 12 (13). art. no. 2104. pp. 1-19. ISSN 1996-1944

Abed, Alaaeddin M. H. and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams and Al-Oqla, Faris M. (2019) Photovoltaic applications: status and manufacturing prospects. Renewable & Sustainable Energy Reviews, 102. pp. 318-332. ISSN 1364-0321; ESSN: 1879-0690

Abed, Alaaeddin M. H. and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams and Al-Oqla, Faris M. (2019) Polymer matrix materials selection for short sugar palm composites using integrated multi criteria evaluation method. Composites Part B: Engineering, 176. art. no. 107342. pp. 1-11. ISSN 1359-8368; ESSN: 1879-1069

Abed, Sadeq Salman and Abu Talib, Abd Rahim and Hilo, Ali and Nfawa, Sadeq Rashid (2019) Numerical study on the turbulent mixed convective heat transfer over 2D microscale backward-facing step. CFD Letters, 11 (10). pp. 31-45. ISSN 2180-1363

Abral, Hairul and Riyan, Soni Satria and Mahardika, Melbi and Hafizulhaq, Fadli and Affi, Jon and Asrofi, Mochamad and Handayani, Dian and Salit, Mohd Sapuan and Stephane, Ilfa and Sugiarti, Eni and Muslimin, Ahmad Novi (2019) Comparative study of the physical and tensile properties of Jicama (Pachyrhizus erosus) starch film prepared using three different methods. Starch, 71 (1800224). pp. 1-9. ISSN 0038-9056; ESSN: 1521-379X

Abu Bakar, Ayu Haslija and Abdullah, Luqman Chuah and Mohd Zahri, Nur Amirah and Al-Khatib, Ma'an Fahmi Rashid (2019) Column efficiency of fluoride removal using Quaternized Palm Kernel Shell (QPKS). International Journal of Chemical Engineering, 2019. art. no. 5743590. pp. 1-13. ISSN 1687-8078; ESSN: 1687-806X

Abu Bakar, Muhammad Hafiz and Mahdi, Mohd Adzir and Yaacob, Mohd Hanif and Amir Hamzah, Amir Syahir and Lim, Hong Ngee and Mustapha Kamil, Yasmin (2019) Dengue E protein detection using a graphene oxide integrated tapered optical fiber sensor. IEEE Journal of Selected Topics in Quantum Electronics, 25 (1). art. no. 7201008. pp. 1-8. ISSN 1077-260X

Abu Bakar, Nabilah and Koh, Chan Ghee and Safiee, Nor Azizi and Nik Daud, Nik Norsyahariati (2019) Effect of flexible soil in seismic hazard assessment for structural design in Kuala Lumpur. International Journal of Geotechnical Earthquake Engineering, 10 (1). pp. 30-42. ISSN 1947-8488; ESSN: 1947-8496

Abu Bakar, Nabilah and Noaman, Noaman Mohammed Ridha and Mohd. Nasir, Noor Azline and Safiee, Nor Azizi (2019) Experimental evaluation of flexural behaviour of rubberized concrete beam. Asian Journal of Civil Engineering, 20 (7). pp. 999-1005. ISSN 1563-0854; ESSN: 2522-011X

Abu Bakar, Nabilah and Safiee, Nor Azizi and Chan, Ghee Koh and Mohd. Nasir, Noor Azline (2019) Analysis of conventionally reinforced coupling beams using non-linear strut-and-tie model. Structures and Buildings, 173 (6). pp. 429-439. ISSN 0965-0911; ESSN: 1751-7702

Abu Bakar, Noor Fitrah and Naim, Mohd Nazli and Boon, Yih Tien and Lenggoro, Wuled and Ahmad, Noraini (2019) Stabilisation of emulsified Agarwood oil in an aqueous system using non-ionic surfactant. Key Engineering Materials, 797. pp. 186-195. ISSN 1662-9795

Abu Kasim, Junainah and Mohd Yusof, Mohd Johari and Mohd Shafri, Helmi Zulhaidi (2019) Monitoring urban green space (UGS) changes by using high resolution aerial imagery: a case study of Kuala Lumpur, Malaysia. Pertanika Journal of Science & Technology, 27 (4). pp. 1971-1990. ISSN 0128-7680; ESSN: 2231-8526

Abu Kasim, Junainah and Mohd Yusof, Mohd Johari and Mohd Shafri, Helmi Zulhaidi (2019) The many benefits of urban green spaces. CSID Journal of Infrastructure Development, 2 (1). pp. 103-116. ISSN 2407-4438; ESSN: 2407-5957

Abu Kassim, Naziratulasikin and Mohamed @ Asa'ari, Ainun Zuriyati and Zainudin, Edi Syams and Zakaria, Sarani and Azman, Siti Khaulah Zakiah and Abdullah, Hazwani Husna (2019) Isolation and characterization of macerated cellulose from pineapple leaf. BioResources, 14 (1). pp. 1998-1209. ISSN 1930-2126

Abu Talib, Abd. Rahim and Mohammed, Ibrahim and Rujhan, Wahiduddeen and Bheekhun, Nadiir Ibrahim (2019) Effect of different weightage of Enova® IC3100 silica aerogel on aluminium alloy composites in ISO2685 aviation standard fire-test. International Journal of Sustainable Aviation, 5 (1). pp. 43-53. ISSN 2050-0467; ESSN: 2050-0475

Abulifa, Abdulhadi Abdulsalam and Che Soh, Azura and Hassan, Mohd Khair and Raja Ahmad, Raja Mohd Kamil and Mohd Radzi, Mohd Amran (2019) Energy management system in battery electric vehicle based on fuzzy logic control to optimize the energy consumption in HVAC system. International Journal of Integrated Engineering, 11 (4). pp. 11-20. ISSN 2229-838X; ESSN: 2600-7916

Adam, Nor Mariah and Masuri, Siti Ujila and Mahmood, Hussein Adel and Sahari, B. B. and Ahmed, Hamdi E. (2019) An investigation of air-gas mixer types designed for dual fuel engines: review. Journal of Engineering and Applied Sciences, 14 (4). pp. 1014-1033. ISSN 1818-7803; ESSN: 1816-949X

Adam, Siti Aisyah and Abdul Jalil, Nawal Aswan and Md Razali, Khairil Anas and Ng, Yee Guan and M. F., Aladdin (2019) Mathematical model of suspension seat-person exposed to vertical vibration for off-road vehicles. International Journal of Automotive and Mechanical Engineering, 16 (2). pp. 6773-6782. ISSN 2229-8649; ESSN: 2180-1606

Adam, Siti Aisyah and Abdul Jalil, Nawal Aswan and Md Rezali, Khairil Anas and Ng, Yee Guan (2019) The effects of posture on suspension seat transmissibility during exposure to vertical whole-body vibration. Journal of Physics: Conference Series, 1262. pp. 1-8. ISSN 1742-6588; ESSN: 1742-6596

Adekanmi, Adeyi Abel (2019) Polymerization of thiourea modified poly(acrylonitrile- Co-acrylic acid) for cationic dyes adsorption from single and binary solution. Doctoral thesis, Universiti Putra Malaysia.

Adeyi, Abel Adekanmi and Md. Jamil, Siti Nurul Ain and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Lau, Kia Li and Abdullah, Mohammad (2019) Adsorptive removal of methylene blue from aquatic environments using thiourea-modified poly(acrylonitrile-co-acrylic acid). Materials, 12 (11). art. no. 1734. pp. 1-17. ISSN 1996-1944

Adeyi, Abel Adekanmi and Md. Jamil, Siti Nurul Ain and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Lau, Kia Li and Abdullah, Mohammad (2019) Simultaneous adsorption of cationic dyes from binary solutions by thiourea-modified poly(acrylonitrile-co-acrylic acid): detailed isotherm and kinetic studies. Materials, 12 (18). art. no. 2903. pp. 1-20. ISSN 1996-1944

Afdzaluddin, Atiqah and Jawaid, Mohammad and Salit @ Sinon, Mohd Sapuan and Ishak, Mohamad Ridzwan (2019) Dynamic mechanical properties of sugar palm/glass fiber reinforced thermoplastic polyurethane hybrid composites. Polymer Composites, 40 (4). pp. 1329-1334. ISSN 0272-8397; ESSN: 1548-0569

Ahmad, Afiqah and Md. Jamil, Siti Nurul Ain and Choong, Thomas Shean Yaw and Abdullah, Abdul Halim and Mastuli, Mohd Sufri and Othman, Nurhanisah and Jiman, Nurnazurah (2019) Green flexible polyurethane foam as Fe-Si adsorbent support for the removal of methylene blue from aqueous solution. Polymers, 11 (12). pp. 1-15. ISSN 2073-4360

Ahmad, Muhammad Sajjad and Mehmood, Muhammad Aamer and Luo, Huibo and Shen, Boxiong and Latif, Muhammad and Wan Ab. Karim Ghani, Wan Azlina and Alkhattabi, Nuha Abdulhamid and Aloqbi, Akram Ahmed and Jambi, Ebtihaj Jamaluddin and Gull, Munazza and Rashid, Umer (2019) Pyrolysis and thermogravimetric study to elucidate the bioenergy potential of novel feedstock produced on poor soils while keeping the environmental sustainability intact. Sustainability, 11 (13). art. no. 3592. pp. 1-15. ISSN 2071-1050

Ahmad, Nur Afiqah and Md. Jamil, Siti Nurul Ain and Choong, Thomas Shean Yaw and Abdullah, Abdul Halim and Mastuli, Mohd Sufri and Othman, Nurhanisah and Jiman, Nurnazurah (2019) Green flexible polyurethane foam as a potent support for Fe-Si adsorbent. Polymers, 11 (12). art. no. 2011. pp. 1-15. ISSN 2073-4360

Ahmad, Nurul Shahidah and Abdullah, Norhafizah and Md Yasin, Faizah (2019) Antifungal activity of titanium dioxide nanoparticles against Candida albicans. BioResources, 14 (4). pp. 8866-8878. ISSN 1930-2126

Ahmad, Saiful Zuhaimi (2019) Genetic algorithm-based optimal overcurrent relays coordination for standalone sustainable hydrokinetic renewable energy distribution network. Masters thesis, Universiti Putra Malaysia.

Ahmad, Siti Anom and Wan Hasan, Wan Zuha and Mohd Noor, Samsul Bahari (2019) A new threshold estimation method of SEMG wavelet de-noising for prolonged fatigue identification. International Journal of Integrated Engineering, 11 (3). pp. 51-59. ISSN 2229-838X; ESSN: 2600-7916

Ahmad, So'bah and Anuar, Mohd Shamsul and Taip, Farah Saleena and Shamsudin, Rosnah and Ab Mutalib, Siti Roha (2019) Influence of process variable on integrated power-temperature drying process for rambutan seed fat yield: a case study. Food Research, 3 (2). pp. 102-107. ISSN ESSN: 2550-2166

Ahmad Daud, Rasydan Ahmad (2019) Development of geographical information tools in road realignment for oil palm plantation. Masters thesis, Universiti Putra Malaysia.

Ahmad Farid, Mohammed Abdillah and Roslan, Ahmad Muhaimin and Hassan, Mohd Ali and Aziz Ujang, Nor Farhana and Zarry, Mohamad and Hasan, Muhamad Yusuf and Yoshihito, Shirai (2019) Convective sludge drying by rotary drum dryer using waste steam for palm oil mill effluent treatment. Journal of Cleaner Production, 240. art. no. 117986. pp. 1-7. ISSN 0959-6526

Ahmad Farid, Mohammed Abdillah and Zakaria, Mohd Rafein and Hassan, Mohd Ali and Mohd Ali, Ahmad Amiruddin and Othman, Mohd Ridzuan and Ibrahim, Izzudin and Samsudin, Mohd Hafif and Shirai, Yoshihito (2019) A holistic treatment system for palm oil mill effluent by incorporating the anaerobic-aerobic-wetland sequential system and a convective sludge dryer. Chemical Engineering Journal, 369. pp. 195-204. ISSN 1385-8947

Ahmad Hambali, Nor Azura Malini and Ajiya, Mohammed and Mohamad Shahimin, Mukhzeer and Abd Wahid, Mohammed Halim and Mahdi, Mohd Adzir (2019) Single-wavelength ring-cavity fiber laser employed preamplification technique to reduce threshold by circulating spontaneous Brillouin scattering. Indonesian Journal of Electrical Engineering and Computer Science, 14 (1). pp. 276-283. ISSN 2502-4752; ESSN: 2502-4760

Ahmad Hamidi, Fara Wahida and Anuar, Mohd Shamsul and Samsu Baharuddin, Azhari and P. Mohammed, Mohd Afandi and Naim, Mohd Nazli and Mohd Tahir, Suraya (2019) Compaction behaviour and mechanical characteristics of chewable binary tablet mixture containing lactose (Flowlac 100) and date (Phoenix dactylifera) powders. International Journal of Research in Pharmaceutical Sciences, 10 (4). pp. 3385-3391. ISSN 0975-7538

Ahmad Mukaddas and Abd Aziz, Farah Nora Aznieta and Mohd Nasir, Noor Azline and Mohamed Sutan, Nursuzailina (2019) Water permeability and chloride and sulphate resistance of rubberised fibre mortar. Journal of Civil Engineering, Science and Technology, 10 (2). pp. 135-146. ISSN 2462-1382

Ahmad Nazri, Nur Asyikin and Azis, Raba’ah Syahidah and Che Man, Hasfalina and Ismail, Ismayadi and Ibrahim, Idza Riati (2019) Extraction of magnetite from millscales waste for ultrafast removal of cadmium ions. International Journal of Engineering and Advanced Technology, 9 (1). pp. 5902-5907. ISSN 2053-5783; ESSN: 2249-8958

Ahmad Shapi'i, Ruzanna and Othman, Siti Hajar and Naim, Mohd Nazli and Kadir Basha, Roseliza (2019) Mechanical properties of tapioca starch-based film incorporated with bulk chitosan and chitosan nanoparticle: a comparative study. Pertanika Journal of Science & Technology, 27 (S1). pp. 95-107. ISSN 0128-7680; ESSN: 2231-8526

Ahmadipour, Masoud (2019) Development of an islanding detection scheme based on combination of slantlet transform and ridgelet probabilistic neural network in distributed generation. Doctoral thesis, Universiti Putra Malaysia.

Ahmadipour, Masoud and Giyoev, Borbad M. and Hizam, Hashim (2019) A new islanding detection scheme based on combination of slantlet transform and probabilistic neural network for grid-tied photovoltaic system. In: 1st IEEE 2019 International Youth Conference on Radio Electronics, Electrical and Power Engineering (REEPE 2019), 14-15 Mar. 2019, Moscow, Russia. .

Ahmadipour, Masoud and Hizam, Hashim and Othman, Mohammad Lutfi and Mohd Radzi, Mohd Amran (2019) Islanding detection method using ridgelet probabilistic neural network in distributed generation. Neurocomputing, 329 (15). pp. 188-209. ISSN 0925-2312

Ahmadipour, Masoud and Hizam, Hashim and Othman, Mohammad Lutfi and Mohd Radzi, Mohd Amran and Chireh, Nikta (2019) A fast fault identification in a grid-connected photovoltaic system using wavelet multi-resolution singular spectrum entropy and support vector machine. Energies, 12 (13). art. no. 2508. pp. 1-18. ISSN 1996-1073

Ahmed, Abdulmajeed Mohammed Al-Ogaidi (2019) Mathematical models for tar cracking and char reactions in a bubbling fluidised bed reactor. Doctoral thesis, Universiti Putra Malaysia.

Ahmed, Ibrahim Mohamed Fikry Mohamed (2019) Modelling and optimization of production of coffee-like powder and brew from palm date seeds by roasting and grinding. Doctoral thesis, Universiti Putra Malaysia.

Ahmed, Modather Mairghany Abdin and Yahya, Azmi and Adam, Nor Mariah and Mat Su, Ahmad Suhaizi and Elsoragaby, Suha Gaafar Babekir (2019) Evaluation of pesticide spraying quality in wetland rice cultivation in Malaysia. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 233-237).

Ahmed, Mohamed Fikry Mohamed and Yusof, Yus Aniza and Al-Awaadh, Alhussein M. and Abdul Rahman, Russly and Chin, Nyuk Ling and Mohd Ghazali, Hasanah (2019) Antioxidative and quality properties of full-fat date seeds brew as influenced by the roasting conditions. Antioxidants, 8 (7). art. no. 226. pp. 1-16. ISSN 2076-3921

Ahmed, Mohamed Fikry Mohamed and Yusof, Yus Aniza and Al-Awaadh, Alhussein M. and Abdul Rahman, Russly and Chin, Nyuk Ling and Mousa, Esraa and Chang, Lee Sin (2019) Effect of the roasting conditions on the physicochemical, quality and sensory attributes of coffee-like powder and brew from defatted palm date seeds. Foods, 8 (2). art. no. 61. pp. 1-19. ISSN 2304-8158

Ahmed Amodu, Oluwatosin and Othman, Mohamed and Noordin, Nor Kamariah and Ahmad, Idawaty (2019) Relay-assisted D2D underlay cellular network analysis using stochastic geometry:overview and future directions. IEEE Access, 7. pp. 115023-115051. ISSN 2169-3536

Ahmed II, Jamilu Bala and Pradhan, Biswajeet and Mansor, Shattri and Md Yusoff, Zainuddin and Ekpo, Salamatu Abraham (2019) Aquifer potential assessment in termites manifested locales using geo-electrical and surface hydraulic measurement parameters. Sensors, 19 (9). art. no. 2107. pp. 1-17. ISSN 1424-8220

Akinfalabi, Shehu-Ibrahim and Rashid, Umer and Choong, Thomas Shean Yaw and Nehdi, Imededdine Arbi and Sbihi, Hassen Mohamed and Gewik, Mohamed Mossad (2019) Esterification of palm fatty acid distillate for biodiesel production catalyzed by synthesized kenaf seed cake-based sulfonated catalyst. Catalysts, 9 (5). art. no. 482. pp. 1-16. ISSN 2073-4344

Akinfalabi, Shehu-Ibrahim and Rashid, Umer and Yunus, Robiah and Yap, Taufiq Yun Hin (2019) Appraisal of sulphonation processes to synthesize palm waste biochar catalysts for the esterification of palm fatty acid distillate. Catalysts, 9 (2). art. no. 184. pp. 1-15. ISSN 2073-4344

Al Asemi, Hammad and Aftab, Syed Mohammed Aminuddin and Zahari, Rizal and Abdul Aziz, Faieza and Ahmad, Kamarul Arifin (2019) Application of computational fluid dynamics in piping distribution system and special focus on the Arabian peninsula: a review. International Review of Mechanical Engineering, 13 (1). ISSN 1970-8734

Al-Adwani, Bader M. S. M. (2019) A comprehensive method for evaluating and reducing risk factors for project implementation. Doctoral thesis, Universiti Putra Malaysia.

Al-Alimi, Abdulmoghni Ali Wazea and Abu Bakar, Muhammad Hafiz and Zainol Abidin, Nadiah and Abas, A. F. and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2019) Dual-wavelength thulium-doped fiber laser assisted by non-adiabatic tapered fiber. Optics & Laser Technology, 112. pp. 26-29. ISSN 0030-3992; ESSN: 1879-2545

Al-Edrus, Syeed Saifulazry Osman and Md Tahir, Paridah and Abdullah, Luqman Chuah and Lee, Seng Hua and Ab Halip, Juliana and Rushdan, Ahmad Ilyas and Salit, Mohd Sapuan (2019) Degradation of medium density fibreboard and particleboard mechanical performance after exposed to different environmental condition. International Journal of Recent Technology and Engineering, 8 (2S4). pp. 528-532. ISSN 2277-3878

Al-Gbur, Omer Saud Azeez and Pradhan, Biswajeet and Mohd Shafri, Helmi Zulhaidi and Shukla, Nagesh and Lee, Chang Wook and Rizeei, Hossein Mojaddadi (2019) Modeling of CO emissions from traffic vehicles using artificial neural networks. Applied Sciences, 9. art. no. 313. pp. 1-23. ISSN 2076-3417

Al-Heattar, Najeeb Mohammed Nagee (2019) Modeling hydrologic response due to the impact of land use changes in the Upper Bernam River basin using machine learning. Doctoral thesis, Universiti Putra Malaysia.

Al-Hiyali, Mohammed I. and Ishak, Asnor J. and Harun, Hafiz R. and Ahmad, Siti A. and Wan Sulaiman, Wan A. (2019) Examination of prefrontal cortex activity after EEG-neurofeedback stimulation in overweight cases. International Journal of Integrated Engineering, 11 (3 spec.). pp. 23-30. ISSN 2229-838X; ESSN: 2600-7916

Al-Hubaishi, Ahmed Saleh Noman and Noordin, Nor Kamariah and Sali, Aduwati and K. Subramaniam, Shamala and Alsahag, Ali Mohammed Mansoor (2019) An efficient pilot assignment scheme for addressing pilot contamination in multicell massive MIMO systems. Electronics, 8 (4). art. no. 372. pp. 1-19. ISSN 2079-9292

Al-Janabi, Ahmed Mohammed Sami and Ghazali, Abdul Halim and Yusuf, Badronnisa (2019) Modified models for better prediction of infiltration rates in trapezoidal permeable stormwater channels. Hydrological Sciences Journal, 64 (15). pp. 1918-1931. ISSN 0262-6667

Al-Janabi, Ahmed Mohammed Sami and Yusuf, Badronnisa and Ghazali, Abdul Halim (2019) Modeling the infiltration capacity of permeable stormwater channels with a check dam system. Water Resources Management, 33. pp. 2453-2470. ISSN 0920-4741; ESSN: 1573-1650

Al-Mansoori, Mohammed Hayder and Al-Alimi, Abdulmoghni Ali Wazea and R., Abdul Sarmani and Abas, A. F. and Alresheedi, Mohammed Thamer and Mahdi, Miaad A. (2019) Wide-uniform triple Brillouin frequency spacing multi-wavelength fiber laser assisted by a distributed Raman amplifier. Optics Express, 27 (19). pp. 26957-26966. ISSN 1094-4087

Al-Medhwahi, Mohammed and Hashim, Fazirulhisyam and Mohd Ali, Borhanuddin and Sali, Aduwati and Alkholidi, Abdulsalam G. (2019) Resource allocation in heterogeneous cognitive radio sensor networks. International Journal of Distributed Sensor Networks, 15 (7). pp. 1-11. ISSN 1550-1329; ESSN: 1550-1477

Al-Najjar, Husam A. H. and Kalantar, Bahareh and Pradhan, Biswajeet and Saeidi, Vahideh and Abdul Halin, Alfian and Ueda, Naonori and Mansor, Shattri (2019) Land cover classification from fused DSM and UAV images using convolutional neural networks. Remote Sensing, 11 (12). art. no. 1461. pp. 1-18. ISSN 2072-4292

Al-Ogaili, Ali Saadon Mtair and Aris, Ishak and Verayiah, Renuga and Ramasamy, Agileswari and Marsadek, Marayati and Rahmat, Nur Azzammudin and Hoon, Yap and Aljanad, Ahmed and Al-Masri, Ahmed N. (2019) A three-level universal electric vehicle charger based on voltage-oriented control and pulse-width modulation. Energies, 12 (12). art. no. 2375. pp. 1-20. ISSN 1996-1073

Al-Qazzaz, Noor Kamal and Sabir, Mohannad K. and Md. Ali, Sawal Hamid and Ahmad, Siti Anom and Grammer, Karl (2019) Effective EEG channels for emotion identification over the brain regions using differential evolution algorithm. In: 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 23-27 July 2019, Berlin, Germany. (pp. 4703-4706).

Al-Rekabi, S. H. and Mustapha Kamil, Yasmin and Abu Bakar, Muhammad Hafiz and Fen, Yap Wing and Lim, Hong Ngee and Samikannu, Kanagesan and Mahdi, Mohd Adzir (2019) Hydrous ferric oxide-magnetite-reduced graphene oxide nanocomposite for detection of arsenic using surface plasmon resonance. Optics & Laser Technology, 111. pp. 417-423. ISSN 0030-3992; ESSN: 1879-2545

Al-Shakarchi, Haider Fawzi Mahmood (2019) Decision support system for optimizing field operation of selected tillage implements. Doctoral thesis, Universiti Putra Malaysia.

Al-Zaghir, Akram Abdullah (2019) Channel congestion control mechanisms for IEEE 802.11P/1609.4 in vehicular ad-hoc networks. Doctoral thesis, Universiti Putra Malaysia.

AlSultan, Hussein Abdulsalam Ali (2019) Oxygen free graphene-doped TiO₂ technique for photo anode dye-sensitised solar cells. Masters thesis, Universiti Putra Malaysia.

Aladdin, Mohd Farid and Abdul Jalil, Nawal Aswan and Guan, Ng Yee and Md Rezali, Khairil Anas and Adam, Siti Aisyah (2019) Evaluation of human discomfort from combined noise and whole-body vibration in passenger vehicle. International Journal of Automotive and Mechanical Engineering, 16 (2). pp. 6808-6824. ISSN 2229-8649; ESSN: 2180-1606

Alajmi, Amer E. S. E. Th. (2019) Investigation of ultrasonic atomization to enhance performance of a micro jet engine using biofuel. Doctoral thesis, Universiti Putra Malaysia.

Alajmi, Fnyees S. M. D. A. (2019) Development of solar-powered biodiesel reactor for Kuwait sheep tallow. Doctoral thesis, Universiti Putra Malaysia.

Alazemi, Hamad R Dh A S (2019) Numerical study on effect of vortex generator for t-junction pipe flow. Doctoral thesis, Universiti Putra Malaysia.

Aldeehani, Ahmaad Kadmouse (2019) Development of integrated green halal supply chain model in food manufacturing industry. Doctoral thesis, Universiti Putra Malaysia.

Alemour, Belal Jamal Tawfiq and Lim, Hong Ngee and Yaacob, Mohd Hanif and Badran, Omar and Hassan, Mohd Roshdi (2019) Improving the electrical conductivity of carbon fiber reinforced epoxy composite using reduced graphene oxide. Materials Research Express, 6 (6). art. no. 065607. ISSN 2053-1591

Alhammadi, Abdulraqeb Shaif Ahmed and Alraih, Saddam and Hashim, Fazirulhisyam and A. Rasid, Mohd Fadlee (2019) Robust 3D indoor positioning system based on radio map using Bayesian network. In: 2019 IEEE 5th World Forum on Internet of Things (WF-IoT), 15-18 Apr. 2019, Limerick, Ireland. (pp. 1-4).

Alhammadi, Abdulraqeb Shaif Ahmed and Hashim, Fazirulhisyam and A. Rasid, Mohd Fadlee and Alraih, Saddam and Aquhali, Abdullah (2019) Simulation and experimental analysis of indoor localization systems. In: 2nd International Seminar on Research of Information Technology and Intelligent Systems (ISRITI 2019), 5-6 Dec. 2019, Yogyakarta, Indonesia. (pp. 233-237).

Ali, Hydar Lafta (2019) Modelling hydro-morpho dynamics of river junctions under the impact of unsubmerged vanes. Doctoral thesis, Universiti Putra Malaysia.

Ali, Hydar Lafta and Yusuf, Badronnisa and Mohammed, Thamer Ahamed and Shimizu, Yasuyuki and Ab Razak, Mohd Shahrizal and Mohamed Rehan, Balqis (2019) Improving the hydro-morpho dynamics of a rivers confluence by using vanes. Resources, 8 (1). art. no. 9. pp. 1-22. ISSN 2079-9276

Ali, Hydar Lafta and Yusuf, Badronnisa and Mohammed, Thamer Ahmed and Shimizu, Yasuyuki and Ab Razak, Mohd Shahrizal and Mohamed Rehan, Balqis (2019) Enhancing the flow characteristics in a branching channel based on a two-dimensional depth-averaged flow model. Water, 11 (9). art. no. 1863. pp. 1-25. ISSN 2073-4441

Ali, Hydar Lafta and Yusuf, Badronnisa and Mohammed, Thamer Ahmed and Shimizu, Yasuyuki and Ab Razak, Mohd Shahrizal and Mohamed Rehan, Balqis (2019) Improving the hydro-morpho dynamics of a river confluence by using vanes. Resources, 8 (1). art. no. 9. pp. 1-22. ISSN 2079-9276

Ali, Mohammed Sabah and Aljanabi, Mohanad and Al-Hamadani, Haider and Mohamed Ariff, Azmah Hanim (2019) Effect of nanocopper additives on the physical properties of porous alumina ceramics using graphite waste as a pore-forming agent. Journal of Engineering and Applied Sciences, 14 (23). 8647- 8657. ISSN 1816-949X

Ali, Rabiatul Adawiyah and Nik Ibrahim, Nik Nor Liyana (2019) Optimization of municipal solid waste conversion technology using process network synthesis. In: International Conference on Environmental Sustainability and Resource Security (IC-ENSURES 2019), 5-6 Nov. 2019, Kuala Lumpur, Malaysia. (pp. 178-182).

Ali, Rabiatul Adawiyah and Nik Ibrahim, Nik Nor Liyana and Lam, Hon Loong (2019) Conversion technologies: evaluation of economic performance and environmental impact analysis for municipal solid waste in Malaysia. Processes, 7 (10). art. no. 752. pp. 1-14. ISSN 2227-9717

Ali, Sulaiha and Hussain, Siti Aslina and Mohd Tohir, Mohd Zahirasri (2019) Fire test and effects of fire retardant on the natural ability of timber: a review. Pertanika Journal of Science & Technology, 27 (2). pp. 867-895. ISSN 0128-7680; ESSN: 2231-8526

Ali Kadhem, Athraa and Abdul Wahab, Noor Izzri and Abdalla, Ahmed N. (2019) Wind energy generation assessment at specific sites in a Peninsula in Malaysia based on reliability indices. Processes, 7 (7). pp. 1-23. ISSN 2227-9717

Alireza, Rezanoori (2019) Development of vertical movement stabilizer for vehicle active suspension system. Doctoral thesis, Universiti Putra Malaysia.

Alkandari, Khaled H. M. A. (2019) Project risk management decision-making method for manufacturing system using statistical approaches. Doctoral thesis, Universiti Putra Malaysia.

Alkhafaji, Falih Salih (2019) Improved genetic algorithm for direct current motor high speed controller implemented on field programmable gate array. Doctoral thesis, Universiti Putra Malaysia.

Alkinany, Enas Akeel Raheem (2019) Face liveness detection based on IQA using anova feature selection. Masters thesis, Universiti Putra Malaysia.

Alkinany, Enas Akeel Raheem and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Wan Adnan, Wan Azizun (2019) Insight on face liveness detection: a systematic literature review. International Journal of Electrical and Computer Engineering, 9 (6). pp. 5165-5175. ISSN 2088-8708; ESSN: 2722-2578

Almassri, Ahmed M. M. (2019) Real time self-calibration algorithm of pressure sensor for robotic hand glove system. Doctoral thesis, Universiti Putra Malaysia.

Almotairi, Abdulaziz M M (2019) Combination of vertical axis wind turbine and solar photovoltaic for hybrid energy. Doctoral thesis, Universiti Putra Malaysia.

Alnaeb, Ali and Raja Abdullah, Raja Syamsul Azmir and Salah, Asem Ahmad and Sali, Aduwati and Abdul Rashid, Nur Emileen and Ibrahim, Idnin Pasya (2019) Detection and classification real-time of fall events from the daily activities of human using forward scattering radar. In: 20th International Radar Symposium (IRS 2019), 26-28 June 2019, Ulm, Germany. (pp. 1-10).

Alomari, Mohammad Ahmed and Yusoff, Mohd Hafiz and Samsudin, Khairulmizam and Ahmad, R. Badlishah (2019) Light database encryption design utilizing multicore processors for mobile devices. In: 2019 IEEE 15th International Colloquium on Signal Processing and its Applications (CSPA 2019), 8-9 Mar. 2019, Penang, Malaysia. (pp. 254-259).

Alostad, Eisa A E B (2019) Conceptual development of an augmented reality application for vehicle inspection in Kuwait. Doctoral thesis, Universiti Putra Malaysia.

Alrashidi, Naser A Z S (2019) Performance of animal fat-based biodiesel on micro-gas turbine. Masters thesis, Universiti Putra Malaysia.

Alrifaey, Moath and Tang, Sai Hong and Supeni, Eris Elianddy and As'arry, Azizan and Ang, Chun Kit (2019) Identification and prioritization of risk factors in an electrical generator based on the hybrid FMEA framework. Energies, 12 (4). art. no. 649. pp. 1-22. ISSN 1996-1073

Alsawaf, Mena and Ghazali, Abdul Halim and Mohammad, Thamer Ahmad and Ab Ghani, Aminuddin and Yusuf, Badronnisa (2019) Movable-bed experiments using spur dike to concentrate flow in one channel of multithreaded channel model. Journal of Hydraulic Engineering, 145 (5). pp. 1-8. ISSN 0733-9429; ESSN: 1943-7900

Alsayed, Abdallah and Raja Ahmad, Raja Mohd Kamil and Ramli, Hafiz Rashidi and As'arry, Azizan (2019) Design and calibration of pinch force measurement using strain gauge for post-stroke patients. International Journal of Integrated Engineering, 11 (4). pp. 40-50. ISSN 2229-838X; ESSN: 2600-7916

Alshammar, Majed Gh A H (2019) Virtual training in mobile plant for turbocharger in oil and gas industry in Kuwait. Doctoral thesis, Universiti Putra Malaysia.

Alyozbaky, Omar Sh. and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Gomes, Chandima and Azis, Norhafiz and Mohd Isa, Maryam (2019) New optimization technique to design the core of three-phase transformer. In: 2nd International Conference on Electrical, Communication, Computer, Power and Control Engineering (ICECCPCE19), 13-14 Feb. 2019, Mosul, Iraq. (pp. 13-18).

Amat Sairin, Masyitah and Abd Aziz, Samsuzana and Tan, Chin Ping and Mustafa, S. and Abd Gani, S. S. and Rokhani, Fakhrul Zaman (2019) Lard classification from other animal fats using dielectric spectroscopy technique. International Food Research Journal, 26 (3). pp. 773-782. ISSN 1985-4668; ESSN: 2231-7546

Aminian, Negin Ozve (2019) Conceptual development of an ergonomic passenger seat and cabin design for single aisle transport airship. Doctoral thesis, Universiti Putra Malaysia.

Amir Hossein, Zaeri and Esmaeilian-Marnani, Aida and Mohd Noor, Samsul Bahari (2019) Sliding mode control improvement by using model predictive, fuzzy logic, and integral augmented techniques for a quadrotor helicopter model. Majlesi Journal of Electrical Engineering, 13 (4). pp. 25-37. ISSN 2345-377X; ESSN: 2345-3796

Ang, Yuhao and Che'ya, Nik Norasma and Roslin, Nor Athirah and Ismail, Mohd Razi and Berahim, Zulkarami and Md Azali, Fadzilah (2019) Pengukuran klorofil daun padi menggunakan indeks tumbuhan spektrum dari imej multispektral. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 299-301).

Anthoney, Francis Xavier (2019) Establishment of a resilient modulus test for evaluating reduced size asphalt mixture. Doctoral thesis, Universiti Putra Malaysia.

Anuar, Mohd Azrol Syafiee and Abdul Rahman, Ribhan Zafira and Che Soh, Azura and Mohd Noor, Samsul Bahari and Abdul Karim, Julia and Maskin, Mazleha and Thangavelu, Thinagaran (2019) MATLAB simulation for loss of flow (LOF) in reactor TRIGA Puspati (RTP). Open International Journal of Informatics, 7 (2 spec.). pp. 45-55. ISSN 2289-2370

Araji, Hamidreza Ahmadzadeh (2019) Assessment of climate change impacts on soybean and sugar beet production in relation to uncertainty of general circulation models in Iran. Doctoral thesis, Universiti Putra Malaysia.

Arockiam, Naveen Jesu (2019) Development and characterization of Kevlar/Cocos nucifera L. Sheath/epoxy hybrid composites and graphene nanoplatelet- modified hybrid nanocomposites for ballistic applications. Doctoral thesis, Universiti Putra Malaysia.

Arockiam, Naveen Jesu and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and R., Yahaya (2019) Mechanical and moisture diffusion behaviour of hybrid Kevlar/Cocos nucifera sheath reinforced epoxy composites. Journal of Materials Research and Technology, 8 (1). pp. 1308-1318. ISSN 2238-7854

Arumugam, Thillai Nayagee and Aman, Mohamad Yusri and Muniandy, Ratnasamy (2019) Resilient modulus of stabilized subgrade for flexible pavement design. International Journal of Civil Engineering and Technology, 10 (5). pp. 740-750. ISSN 0976-6308; ESSN: 0976-6316

Ata, Karimeh Ibrahim Mohammad and Che Soh, Azura and Ishak, Asnor Juraiza and Jaafar, Haslina and Khairuddin, N. A. (2019) Smart indoor parking system based on Dijkstra's algorithm. International Journal of Electrical Engineering and Applied Sciences, 2 (1). pp. 13-20. ISSN 2600-7495; ESSN: 2600-9633

Attia, Osam Hassan (2019) Optimization of wind-powered dust removal parameters for photovoltaics solar panel. Doctoral thesis, Universiti Putra Malaysia.

Attia, Osam Hassan and Adam, Nor Mariah and As'arry, Azizan and Md Rezali, Khairil Anas (2019) Removal of dust from the solar panel surface using mechanical vibrator. Journal of Physics: Conference Series, 1262. pp. 1-8. ISSN 1742-6588; ESSN: 1742-6596

Attia, Osam Hassan and Adam, Nor Mariah and As'arry, Azizan and Md Rezali, Khairil Anas and Hanoon, Ammar Nasiri (2019) Development of a prediction model for output power reduction of PV solar panels based on environmental parameters using particle swarm optimization technique. Journal of Engineering and Applied Sciences, 14 (5). pp. 1518-1531. ISSN 1816-949X

Awang Jumat, Nurkhairunisa and Abdullah, Ermira Junita and Mazlan, Norkhairunnisa (2019) Effect of polydimethylsiloxane (PDMS) coating on the behavior of Shape Memory Alloy (SMA) actuator. International Journal of Recent Technology and Engineering, 8 (1 spec.). pp. 275-280. ISSN 2277-3878

Azaman, Mohd Ikmal Hafizi (2019) Feasibility analysis of oil palm harvesting using fiber laser system. Masters thesis, Universiti Putra Malaysia.

Azizi, Muhammad Azim and Mohd Ihsan, Ahmad Kamal Ariffin (2019) Peridynamic model for nonlinear viscoelastic creep and creep rupture of Polypropylene. Journal of Mechanical Engineering and Sciences, 13 (4). pp. 5735-5752. ISSN 2289-4659; ESSN: 2231-8380

Azmi, A. M. R. and Sultan, M. T. H. and Shah, A.U.M. and Jawaid, M. and Nor, A. F. M. and Ismail, K. I. (2019) Flexural properties of kenaf fibre hybrid and non-hybrid composite materials. International Journal of Recent Technology and Engineering, 8 (1 spec.5). pp. 467-470. ISSN 2277-3878

Azmi, N. S. and Kadir Basha, Roseliza and Othman, Siti Hajar and Mohammed, Mohd Afandi P. (2019) Characterization of antioxidant tapioca/polyaniline composites film prepared using solution casting method. Food Research, 3 (4). pp. 317-324. ISSN 0095-974X; ESSN: 2550-2166

Azni, Atiyyah Ameenah and Wan Ab Karim Ghani, Wan Azlina and Idris, Azni and Ja'afar, Mohamad Fakri Zaky and Mohd Salleh, Mohamad Amran and Ishak, Nor Shafizah (2019) Microwave-assisted pyrolysis of EFB-derived biochar as potential renewable solid fuel for power generation: biochar versus subbituminous coal. Renewable Energy, 142. pp. 123-129. ISSN 0960-1481; ESSN: 1879-0682

Baara, Wisam Ali Basher and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2019) Effect of elastic module degradation measurement in different sizes of the nonlinear isotropic–kinematic yield surface on springback prediction. Metals, 9 (5). art. no. 511. pp. 1-12. ISSN 2075-4701

Babadi, Farahnaz Eghbali and Yunus, Robiah and Abbasi, Ali and Soltani, Salman Masoudi (2019) Response surface method in the optimization of a rotary pan-equipped process for increased efficiency of slow-release coated urea. Processes, 7 (3). art. no. 125. pp. 1-16. ISSN 2227-9717

Bachik, Nur Azizah and Hashim, Norhashila (2019) Effects of corn stem as a soil conditioner toward a green approach on waste management. Acta Horticulturae, 1253 (1). ISSN 0567-7572

Bagheri, Milad and Ibrahim, Zelina Zaiton and Mansor, Shattri and Abd Manaf, Latifah and Badarulzaman, Nurwati and Vaghefi, Negin (2019) Shoreline change analysis and erosion prediction using historical data of Kuala Terengganu, Malaysia. Environmental Earth Sciences, 78. art. no. 477. pp. 1-21. ISSN 1866-6280: ESSN: 1866-6299

Baitab, Danish Mahmood and Abang Abdul Majid, Dayang Laila and Abdullah, Ermira Junita and Abdul Hamid, Mohd Faisal (2019) Improving the stiffness of multilayer 3D woven composites by the integration of shape memory alloys (SMAs) into structures. The Journal of The Textile Institute, 111 (9). pp. 1371-1379. ISSN 1754-2340; ESSN: 0040-5000

Basri, Ernnie Illyani and Basri, Adi Azriff and Abas, Mohd. Firdaus and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Ahmad, Kamarul Arifin (2019) UAV NACA4415 wing structural performance analysis subjected to external aerodynamic load using Schrenk’s approximation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (2). pp. 178-190. ISSN 2289-7879

Basri, Ernnie Illyani and Hameed Sultan, Mohamed Thariq and Mustapha, Faizal and Basri, Adi Azriff and Abas, Mohd Firdaus and Abdul Majid, Mohd Shukry and Mandeep, Jit Singh and Ahmad, Kamarul Arifin (2019) Performance analysis of composite ply orientation in aeronautical application of unmanned aerial vehicle (UAV) NACA4415 wing. Journal of Materials Research and Technology, 8 (5). pp. 3822-3834. ISSN 2238-7854

Basri, Ernnie Illyani and Hameed Sultan, Mohamed Thariq and Mustapha, Faizal and Basri, Adi Azriff and Ahmad, Kamarul Arifin (2019) Unmanned Aerial Vehicle (UAV) structural and manufacturing of conventional and humpback Tubercles Leading Edge (TLE) in aeronautical applications. International Journal of Recent Technology and Engineering, 8 (1 spec. 5). pp. 479-496. ISSN 2277-3878

Basri, Ernnie Illyani and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Basri, Adi Azriff and Abas, Mohd Firdaus and Abdul Majid, Mohd Shukry and Ahmad, Kamarul Arifin (2019) Conceptual design and simulation validation based finite element optimisation for tubercle leading edge composite wing of an unmanned aerial vehicle. Journal of Materials Research and Technology-JMR&T, 8 (5). pp. 4374-4386. ISSN 2238-7854

Bello, Abdulkarim and Md. Sultan, Abubakar and Shehu, Sirajo (2019) Multi-criteria evolutionary regression test prioritization for dynamic object-oriented programs. International Journal of Advances in Electronics and Computer Science (IJAECS), 6 (2). pp. 1-6. ISSN 2394-2835

Bobba, Sujith (2019) Mechanical charaterization of S-glass and E-glass reinforced epoxy composite elbow pipe joints submerged in sea water. Doctoral thesis, Universiti Putra Malaysia.

Bobba, Sujith and Leman, Z. and S., M. Sapuan and Zainudin, E. S. (2019) Fluid flow and static structural analysis of E-glass versus S2-glass fiber/epoxy reinforced pipe joints. Agricultural Engineering International: CIGR Journal, 21 (4). pp. 56-63. ISSN 1682-1130

Bobba, Sujith and Leman, Zulkiflle and Sapuan, Salit M. and Zainudin, Edi Syams (2019) Analysis on the impact behaviors of E and S-glass composite elbow pipe joints exposed to impact loading followed by axial compression: analysis on impact and compression of elbow joints. International Journal of Manufacturing, Materials, and Mechanical Engineering, 9 (3). pp. 14-25. ISSN 2156-1680; ESSN: 2156-1672

Bobba, Sujith and Leman, Zulkiflle and Zainuddin, Edi Syams and Sapuan, Mohd Sapuan (2019) Study of interior temperature distribution and implementation of smart materials In the truck cabin during summer conditions. Materials Today: Proceedings, 18 (pt.1). pp. 361-374. ISSN 2214-7853

Bobba, Sujith and Leman, Zulkiflle and Zainudin, Edi Syams and Salit, Mohd Sapuan (2019) Hoop tensile strength behaviour between different thicknesses E-glass and S-glass FRP rings. AIMS Materials Science, 6 (3). pp. 315-327. ISSN 2372-0468; ESSN: 2372-0484

Boon, Y. T. and Naim, Mohd Nazli and Abu Bakar, Noor Fitrah and Zakaria, Rabitah and Ahmad, Noraini (2019) Electrophoretic mobility of nano-emulsified cinnamon oil in sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) system. Food Research, 3 (4). pp. 333-341. ISSN 2550-2166

Chak, Yew Chung (2019) A combined attitude and sun tracking system for spacecraft using fuzzy logic control. Doctoral thesis, Universiti Putra Malaysia.

Chandrasegaran, Thinesh and Harmin, Mohammad Yazdi and Rosly, Nur Asyikin (2019) Nonlinear reduced order model for aeroelastic static deformations of cantilevered rectangular high aspect ratio wing model. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1). pp. 924-930. ISSN 2249-8958

Chandrasekar, Muthukumar and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Leman, Zulkiflle and Shahroze Ali, Rao Muhammad (2019) Effect of freezing temperature and stacking sequence on the mechanical properties of hybrid fibre metal laminates made with carbon, flax, and sugar palm fibres. BioResources, 14 (2). pp. 3042-3056. ISSN 1930-2126

Che Hasan, Mohd Hanif and Hassan, Mohd Khair and Ahmad, Fauzi (2019) Modelling and simulation of electronic wedge brake based antilock brake system. International Journal of Advanced Control and Automation System (IJACAS), 1 (1). pp. 1-6. ISSN 2158-107X; ESSN: 2156-5570

Che Hasan, Mohd Hanif and Hassan, Mohd Khair and Ahmad, Fauzi and Marhaban, Mohammad Hamiruce (2019) Modelling and design of optimized electronic wedge brake. In: 2019 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2019), 29 June 2019, Shah Alam, Selangor, Malaysia. (pp. 189-193).

Che Hashim, Muhamad Faiz and N. Y., Liyana and Khairudin, Nurulhuda and Muharam, Farrah Melissa and Zulkafli, Zed Diyana and Berahim, Zulkarami and Ismail, Mohd Razi (2019) Preliminary evaluation of ORYZA (v3) crop growth model for MR269 rice variety. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 306-309).

Che Hassan, Intan Melati and Abdul Aziz, Faziawati and Abu Bakar, Nor Azlina and Ahmad, Noordin (2019) Housing affordability of middle income households in Kuala Lumpur. Malaysian Journal of Social Sciences and Humanities (MJSSH), 4 (3). pp. 185-191. ISSN 2504-8562

Che Lah, Che Nur Hamizah and Jamaludin, Norhanisah and Rokhani, Fakhrul Zaman and Abdul Rashid, Suraya and Muhammad Noor, Ahmad Shukri (2019) Lard detection using a tapered optical fiber sensor integrated with gold- graphene quantum dots. Sensing and Bio-Sensing Research, 26. pp. 1-6. ISSN 2214-1804

Che Mohd Rosley, Ili Syazwani (2019) Shear and compression behaviour of crushed mudrocks in Malaysia. Masters thesis, Universiti Putra Malaysia.

Chee, Siew Sand and Jawaid, Mohammad and Hameed Sultan, Mohammed Thariq and Alothman, Othman Y. and Abdullah, Luqman Chuah (2019) Thermomechanical and dynamic mechanical properties of bamboo/woven kenaf mat reinforced epoxy hybrid composites. Composites Part B: Engineering, 163. pp. 165-174. ISSN 1359-8368; ESSN: 1879-1069

Cherian, Johny and S. M., Abdul Khader and B., Raghuvir Pai and M., Zuber and K. A., Ahmed and Ahmad, Zanuldin (2019) Haemodynamic study of idealistic renal artery under different flow conditions. Journal of Computational Methods in Sciences and Engineering, 19 (2). pp. 541-552. ISSN 1472-7978; ESSN: 1875-8983

Chikwendu, Daniel I. Onwude and Hashim, Norhashila and Abdan, Khalina and Janius, Rimfiel and Chen, Guangnan (2019) Experimental studies and mathematical simulation of intermittent infrared and convective drying of sweet potato (Ipomoea batatas L.). Food and Bioproducts Processing, 114. pp. 163-174. ISSN 0960-3085; ESSN: 1744-3571

Choo, Hong Ning and Abdul Latiff, Nurul Adilah and Varahram, Pooria and Mohd Ali, Borhanuddin (2019) Optimized memory polynomial with binomial reduction in digital pre-distortion for wireless communication systems. ARPN Journal of Engineering and Applied Sciences, 14 (16). pp. 2929-2936. ISSN 1819-6608

Choo, Thye Foo and Mohd Salleh, Mohamad Amran and Kok, Kuan Ying and Matori, Khamirul Amin (2019) Mineralogy and thermal expansion study of mullite-based ceramics synthesized from coal fly ash and aluminum dross industrial wastes. Ceramics International, 45 (6). pp. 7488-7494. ISSN 0272-8842

Choo, Thye Foo and Mohd Salleh, Mohamad Amran and Kok, Kuan Ying and Matori, Khamirul Amin (2019) Modified cenospheres as non-sacrificial pore-forming agent for porous mullite ceramics. Ceramics International, 45 (17 pt. A). pp. 21827-21834. ISSN 0272-8842

Choo, Thye Foo and Mohd Salleh, Mohamad Amran and Kok, Kuan Ying and Matori, Khamirul Amin (2019) A review on synthesis of mullite ceramics from industrial wastes. Recycling, 4 (3). art. no. 39. pp. 1-11. ISSN 2313-4321

Choong, Thomas Shean Yaw and Kheawhom, Soorathep and Abbasi, Ali and Faridi-Majidi, Reza and Abouzari-Lotf, Ebrahim and Nasef, Mohamed Mahmoud and Takeshi, Matsuura (2019) Amine functionalized radiation induced grafted polyolefin nanofibers for CO₂ adsorption. Radiation Physics and Chemistry, 156. pp. 58-66. ISSN 0969-806X

Cyprian, Amadi Chukwuemena and Che Ujang, Che Ahmad Bukhari and Sali, Aduwati and Hashim, Fazirulhisyam (2019) Collaborative adaptive filtering approach for the identification of complex-valued improper signals. Circuits Systems and Signal Processing, 38 (8). pp. 3860-3879. ISSN 0278-081X; ESSN: 1531-5878

Danial, Rabiatuladawiyah and Sobri, Shafreeza and Abdullah, Luqman Chuah and Mobarekeh, Mohsen Nourouzi (2019) FTIR, CHNS and XRD analyses define mechanism of glyphosate herbicide removal by electrocoagulation. Chemosphere, 233. pp. 559-569. ISSN 0045-6535; ESSN: 1879-1298

Dashtizadeh, Zahra and Khalina, Abdan and Cardona, Francisco and Lee, Ching Hao (2019) Mechanical characteristics of green composites of short kenaf bast fiber reinforced in cardanol. Advances in Materials Science and Engineering, 2019. art. no. 8645429. pp. 1-6. ISSN 1687-8434; ESSN: 1687-8442

Dasuki, Norhafizah and Romli, Fairuz Izzudin (2019) Malaysian public perception on passenger standing cabin for commercial transport aircraft in domestic flights. International Journal of Engineering and Advanced Technology, 8 (3). pp. 197-203. ISSN 2249-8958

Dawood, Bahaa Abbas and Khamas, Salam K. and Ismail, Alyani and Sali, Aduwati (2019) Full embroidery designed electro-textile wearable tag antenna for WBAN application. Sensors, 19 (11). art. no. 2470. pp. 1-11. ISSN 1424-8220

Dawood, Kareem Abbas and Sharif, Khaironi Yatim and Zaidan, A. A. and Abd Ghani, Abdul Azim and Zulzalil, Hazura and Zaidan, B. B. (2019) Mapping and analysis of Open Source Software (OSS) usability for sustainable OSS product. IEEE Access, 7. pp. 65913-65933. ISSN 2169-3536

Dehghan, Shayan (2019) Experimental and numerical investigation on friction drilling of difficult-to-machine materials. Doctoral thesis, Universiti Putra Malaysia.

Dehghan, Shayan and Ismail, Mohd Idris Shah and Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2019) Measurement and analysis of thrust force and torque in friction drilling of difficult-to-machine materials. International Journal of Advanced Manufacturing Technology, 105. pp. 2749-2769. ISSN 0268-3768; ESSN: 1433-3015

Dehghan, Shayan and Ismail, Mohd Idris Shah and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2019) Friction drilling of difficult-to-machine materials: workpiece microstrutural alterations and tool wear. Metals, 9 (9). art. no. 945. pp. 1-14. ISSN 2075-4701

Dehghan, Shayan and Ismail, Mohd Idris Shah and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2019) Friction drilling of difficult-to-machine materials: workpiece microstructural alterations and tool wear. Metals, 9 (9). art. no. 945. pp. 1-14. ISSN 2075-4701

Dehghan, Shayan and Ismail, Mohd Idris Shah and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T. Hang Tuah and Parnianifard, Amir (2019) Experimental Investigation on Friction Drilling of Stainless Steel AISI 304. International Journal of Machining and Machinability of Materials, 21 (4). pp. 279-299. ISSN 1748-5711; ESSN: 1748-572X

Derahman, Aishah and Zainal Abidin, Zurina and Cardona, Francisco and Awang Biak, Dayang Radiah and Md. Tahir, Paridah and Abdan, Khalina and Liew, Kan Ern (2019) Epoxidation of jatropha methyl esters via acidic ion exchange resin: optimization and characterization. Brazilian Journal of Chemical Engineering, 36 (2). pp. 959-968. ISSN 0104-6632; ESSN: 1678-4383

Ebrahim, Mohammad Nazri and Che Man, Hasfalina and Mohamed Zawawi, Mohamed Azwan and Hamzah, Muhammad Hazwan (2019) Prediction of groundwater contaminants from cattle farm using Visual MODFLOW. Pertanika Journal of Science & Technology, 27 (4). pp. 2265-2279. ISSN 0128-7680; ESSN: 2231-8526

Edi Syafri and Sudirman and Mashadi and Evi Yulianti and Deswita and Mochamad Asrofic and Hairul Abral and Salit, Mohd Sapuan and Ilyas, R. A. and Ahmad Fudholi (2019) Effect of sonication time on the thermal stability, moisture absorption, and biodegradation of water hyacinth (Eichhornia crassipes) nanocellulose-filled bengkuang (Pachyrhizus erosus) starch biocomposites. Journal of Materials Research and Technology, 8 (6). pp. 6223-6231. ISSN 2238-7854

Eid Thafnan Alajmi, Amer Eid Salem and Adam, Nor Mariah and Hairuddin, Abdul Aziz and Abdullah, Luqman Chuah (2019) Fuel atomization in gas turbines: a review of novel technology. International Journal of Energy Research, 43 (8). pp. 3166-3181. ISSN 0363-907X

El-Zeadani, Mohamed and Muhammad Rashid, Raizal Saifulnaz and Amran, Mugahed Yahya Hussein and Hejazi, Farzad and Jaafar, Mohd Saleh (2019) Short-term deflection of RC beams using a discrete rotation approach. International Journal of Advanced Structural Engineering, 11 (4). pp. 473-490. ISSN 2008-3556; ESSN: 2008-6695

El-Zeadani, Mohamed and Muhammad Rashid, Raizal Saifulnaz and Hejazi, Farzad and Amran, Y. H. Mugahed and Jaafar, M. S. and Alyousef, Rayed and Alrshoudi, Fahed (2019) Mechanics-based approach for predicting the short-term deflection of CFRP plated RC beams. Composite Structures, 225. art. no. 111169. pp. 1-11. ISSN 0263-8223

El-Zeadani, Mohamed and Muhammad Rashid, Raizal Saifulnaz and Mugahed Amran, Y. H. and Hejazi, Farzad and Jaafar, Mohd Saleh and Alyousef, Rayed and Alabduljabbar, Hisham (2019) Analytical mechanics solution for measuring the deflection of strengthened RC beams using FRP plates. Case Studies in Construction Materials, 11. art. no. 00272. pp. 1-17. ISSN 2214-5095

El-Zeadani, Mohamed Hassan Hamad (2019) Mechanics based solution for predicting deflection and ultimate load of ordinary and plated-reinforced concrete beams. Masters thesis, Universiti Putra Malaysia.

Elaswed, Nadia Ahmed and Mohammad, Thamer Ahmad and Ghazali, Abdul Halim and Md Yusoff, Zainuddin (2019) Modelling of groundwater pumping scenarios and their impact on saline water intrusion in a Tripoli coastal aquifer, Libya. Pertanika Journal of Science & Technology, 27 (3). pp. 1407-1427. ISSN 0128-7680; ESSN: 2231-8526

Elsokkary, Mohamed and Hamid, Hussain and Law, Teik Hua and Jakarni, Fauzan and Kotb, Akram (2019) Likelihood of motorcyclists transferring to safer mode of transport in Cairo, Egypt. International Journal of Engineering and Advanced Technology, 8 (6). pp. 2411-2416. ISSN 2249-8958

Elsoragaby, Suha and Yahya, Azmi and Mahadi @ Othman, Muhammad Razif and Mat Nawi, Nazmi and Mairghany, Modather (2019) Energy utilization in major crop cultivation. Energy, 173 (2019). pp. 1285-1303. ISSN 0360-5442

Elsoragaby, Suha Gaafar Babekir (2019) Optimization of energy inputs and greenhouse gas emissions of wetland rice cultivation in Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Elsoragaby, Suha Gaafar Babekir and Yahya, Azmi and Ahmed, Modather Mairghany Abdin and Adam, Nor Mariah and Mahadi @ Othman, Muhammad Razif and Mat Nawi, Nazmi and Mat Su, Ahmad Suhaizi (2019) Comparetive field performances and quality of conventional combine and mid-size combine in wetland rice cultivation in Malaysia. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 220-225).

Elsoragaby, Suha Gaafar Babekir and Yahya, Azmi and Mahadi, Muhammad Razif and Mat Nawi, Nazmi and Mairghany, Modather (2019) Analysis of energy use and greenhouse gas emissions (GHG) of transplanting and broadcast seeding wetland rice cultivation. Energy, 189. pp. 1-16. ISSN 0360-5442

Elsoragaby, Suha Gaafar Babekir and Yahya, Azmi and Mahadi @ Othman, Muhammad Razif and Mat Nawi, Nazmi and Ahmed, Modather Mairghany Abdin (2019) Comparative field performances between conventional combine and mid-size combine in wetland rice cultivation. Heliyon, 5 (4). art. no. e01427. pp. 1-25. ISSN 2405-8440

Emami Moghaddam, Seyed Amirebrahim and Harun, Razif and Mokhtar, Mohd Noriznan and Zakaria, Rabitah (2019) Stability improvement of algal-alginate beads by zeolite molecular sieves 13X. International Journal of Biological Macromolecules, 132. pp. 592-599. ISSN 0141-8130; ESSN: 1879-0003

Emparan, Quin and Harun, Razif and Danquah, M. K. (2019) Role of phycoremediation for nutrient removal from wastewaters: a review. Applied Ecology and Environmental Research, 17 (1). pp. 889-915. ISSN 1589-1623; ESSN: 1785-0037

Emparan, Quin and Yew, Sing Jye and Danquah, Michael K. and Harun, Mohd Razif (2019) Cultivation of Nannochloropsis sp. microalgae in palm oil mill effluent (POME) media for phycoremediation and biomass production: effect of microalgae cells with and without beads. Journal of Water Process Engineering, 33. art. no. 101043. pp. 1-6. ISSN 2214-7144

Esfahan, Zahra Maghareh (2019) Characterisation of bovine serum albumin-based biomaterials synthesised by subcritical water technology. Doctoral thesis, Universiti Putra Malaysia.

Esua, Okon Johnson and Chin, Nyuk Ling and Yusof, Yus Aniza and Sukor, Rashidah (2019) Combination of ultrasound and ultraviolet‐C irradiation on kinetics of color, firmness, weight loss, and total phenolic content changes in tomatoes during storage. Journal of Food Processing and Preservation, 43 (10). art. no. Wiley-Blackwell Publishing. pp. 1-12. ISSN 0145-8892; ESSN: 1745-4549

Esua, Okon Johnson and Chin, Nyuk Ling and Yusof, Yus Aniza and Sukor, Rashidah (2019) Effects of simultaneous UV-C radiation and ultrasonic energy postharvest treatment on bioactive compounds and antioxidant activity of tomatoes during storage. Food Chemistry, 270. pp. 113-122. ISSN 0308-8146

Etsu, Shehu Umar (2019) Dynamic mathematical modelling of free fatty acid accumulation in fresh oil palm fruit (Elaeis guineensis jacq.). Doctoral thesis, Universiti Putra Malaysia.

Etti, C. J. and Yusof, Y. A. and Chang, L. S. and Ekanem, V. G. (2019) Flowability and physical properties of wheat-unripe plantain (Musa paradisiaca) composite flour. Food Research, 3 (2). pp. 151-156. ISSN 2550-2166

Fadi Imad and Syed Ahmad, Sharifah Mumtazah and Hashim, Shaiful Jahari and Samsudin, Khairulmizam (2019) GPU accelerated stereo vision system to capture handwriting information. International Journal of Advanced Trends in Computer Science and Engineering, 8 (4). pp. 1186-1193. ISSN 2278-3091

Fadzil, Nadia Izati and Shukor, Mohd Yunus and Sabullah, Mohd Khalizan and Mohd Daud, Hassan and Zulkharnain, Azham and Ahmad, Siti Aqlima (2019) Effects of aluminium on Clarias gariepinus physiology, gills histology and cholinesterase in vivo and in vitro. International Journal of Agriculture and Biology, 22 (1). pp. 91-101. ISSN 1560-8530; ESSN: 1814-9596

Fanos, Ali Mutar (2019) Development of a hybrid machine learning model for rockfall source and hazard assessment using laser scanning data and GIS. Doctoral thesis, Universiti Putra Malaysia.

Fanos, Ali Mutar and Pradhan, Biswajeet and Mansor, Shattri and Md Yusoff, Zainuddin and Abdullah, Ahmad Fikri and Jung, Hyung Sup (2019) Rockfall source identification using a hybrid Gaussian mixture-ensemble machine learning model and LiDAR data. Korean Journal of Remote Sensing, 35 (1). pp. 93-115. ISSN 1225-6161; ESSN: 2287-9307

Farahani, Hamid and Wagiran, Rahman and Urban, Gerald A. (2019) Perovskites as surface-assisted room temperature protonic conductor humidity sensor. In: 18th IEEE SENSORS 2019, 27-30 Oct. 2019, Montreal, Canada. .

Faraj, Muneerah ABS (2019) Computational study of an air ventilation system based on CFD simulation in hospital operation theatre environment. Doctoral thesis, Universiti Putra Malaysia.

Farooqi, Awais and Othman, Muhammad Murtadha and Abidin, Ahmad Farid and Sulaiman, Shahril Irwan and Mohd Radzi, Mohd Amran (2019) Mitigation of power quality problems using series active filter in a microgrid system. International Journal of Power Electronics and Drive Systems, 10 (4). pp. 2245-2253. ISSN 2088-8694

Fikry, Mohammad and Yusof, Yus Aniza and Al-Awaadh, Alhussein M. and Abdul Rahman, Russly and Nyuk, Ling Chin and Mousa, Esraa and Chang, Lee Sin (2019) Kinetics modelling of the colour, hardness, grinding energy consumption and oil yield changes during the conventional roasting of palm date seeds. Food Science and Technology Research, 25 (3). pp. 351-362. ISSN 1344-6606; ESSN: 1881-3984

Flayyih, Wameedh N. and Samsudin, Khairulmizam and Hashim, Shaiful J. and Ismail, Yehea and Rokhani, Fakhrul Zaman (2019) Multi-bit error control coding with limited correction for high-performance and energy- efficient network on chip. IET Circuits Devices & Systems, 14 (1). pp. 7-16. ISSN 1751-858X; ESSN: 1751-8598

Gan, Chia Sheng (2019) Investigation of lightning damages in glass fibre-reinforced prepreg composites. Masters thesis, Universiti Putra Malaysia.

Gan, Chia Sheng and Lin, Yaw Tan and Chia, Chen Ciang and Mustapha, F. and Lee, Jung Ryul (2019) Nondestructive detection of incipient thermal damage in glass fiber reinforced epoxy composite using the ultrasonic propagation imaging. Functional Composites and Structures, 1 (2). art. no. 025006. pp. 1-10. ISSN 2631-6331

Gatea, Sarah Jabbar and Hejazi, Farzad and Hanoon, Ammar Nasiri and Muhammad Rashid, Raizal Saifulnaz (2019) Damage detection for UHPFRC communication tower based on frequency data and particle swarm optimization. Journal of Civil Engineering and Management, 25 (6). pp. 495-517. ISSN 1392-3730; ESSN: 1822-3605

Geraeds, Marlein and van Emmerik, Tim and de Vries, Robin and Ab Razak, Mohd Shahrizal (2019) Riverine plastic litter monitoring using unmanned aerial vehicles (UAVs). Remote Sensing, 11 (17). art. no. 2045. pp. 1-18. ISSN 2072-4292

Ghajar, Masoumeh Asghari (2019) Development of a simple structure of milifluidic impedance-based sensor for speed measurement. Masters thesis, Universiti Putra Malaysia.

Ghazi, Firas Faisal (2019) Optimization of fast fourier transform based on twiddle factor using genetic algorithm on raspberry pi. Masters thesis, Universiti Putra Malaysia.

Ghazi, Firas Faisal and Sulaiman, Nasri (2019) Optimization of fast fourier transform processor using genetic algorithm on Raspberry Pi. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1 spec. 6). pp. 384-393. ISSN 2278-3091

Ghobakhloo, Morteza and Azar, Adel and Tang, Sai Hong (2019) Business value of enterprise resource planning spending and scope: a post-implementation perspective. Kybernetes, 48 (5). pp. 967-989. ISSN 0368-492X; ESSN: 1758-7883

Gopal, Balamurugan A. (2019) Shear strength of steel-reinforced ultra-high performance concrete dry and epoxy joints for segmental girders. Doctoral thesis, Universiti Putra Malaysia.

Gumaan Abdulhameed, Abdullah Abdulhameed and Abdul Halin, Izhal and Mohtar, Mohd Nazim and Hamidon, Mohd Nizar (2019) The role of medium on the assembly of carbon nanotube by dielectrophoresis. Journal of Dispersion Science and Technology, 41 (10). pp. 1576-1587. ISSN 0193-2691; ESSN: 1532-2351

Habibiasr, Mina (2019) Effects of drying on the physical and chemical properties of palm kernels. Doctoral thesis, Universiti Putra Malaysia.

Hadi, Al Obaidi Mohammed Rmaez (2019) Unmanned aerial vehicle power estimation with non-polarity charging system. Masters thesis, Universiti Putra Malaysia.

Hadi, Mustafa Kareem (2019) Development of automatic pest sampling and detection system for cash crops. Masters thesis, Universiti Putra Malaysia.

Hairuddin, Abdul Aziz and M. Tobib, Hasyuzariza and Zulkifli, Fariza and M. Noor, Muhamad (2019) The performance of a single-cylinder diesel engine fuelled with egusi based biodiesel. IOP Conference Series: Materials Science and Engineering, 469 (1). pp. 1-10. ISSN 1757-8981; ESSN: 1757-899X

Hairuddin, Abdul Aziz and Mat Noor, Muhamad and Pshtiwan, M. Sharif and Mohamed, Norhafana and Hagos, F. Y. and Kadirgama, Kumaran and Ramasamy, D. and Rahman, M. M. and Alenezi, R. and Hoang, A. T. (2019) A review of the performance and emissions of nano additives in diesel fueled compression ignition-engines. IOP Conference Series: Materials Science and Engineering, 469 (1). art. no. 012035. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Hajikhani, Maryam and Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin (2019) The impact of human resource factors on lightning safety performance. In: 11th Asia-Pacific International Conference on Lightning (APL 2019), 12-14 June 2019, Hong Kong, China. .

Hajiyat, Zahraa Raad Mayoof (2019) User requirement evaluation of channel coding schemes for 5G mobile communication system in transmitting short length messages. Masters thesis, Universiti Putra Malaysia.

Hamad, Salih Gwami Mohammed and Gomes, Chandima and Mehrjou, Mohammad Rezazadeh (2019) Switching transients due to a power factor correction capacitor bank in LV power system and their comparison with lightning impulses. In: 15th International Symposium on Lightning Protection (SIPDA 2019), 30 Sept.-4 Oct. 2019, Sao Paulo, Brazil. .

Hamamah, Fuad Abdullah Yahya and Wan Ahmad, Wan Fatinhamamah and Gomes, Chandima and Mohd Isa, Maryam and Homam, Mariyam Jamilah (2019) Concerns on the risk of Malaysian civil and defense systems due to intentional electromagnetic interference. In: 2019 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE), 25-27 Nov. 2019, Hatten Hotel, Melaka, Malaysia. .

Hamdan, Nor Salwa and Salit, Mohd Sapuan and M. T., Mastura and Mohamed Yusoff, Mohd Zuhri (2019) Analytic hierarchy process (AHP) based materials selection system for natural fiber as reinforcement in biopolymer composites for food packaging. BioResources, 14 (4). pp. 10014-10036. ISSN 1930-2126

Hamdan, Sinin and Musib, Ahmad Faudzi and Musoddiq, I. A. and Wahid, H. A. (2019) Some studies on the understanding the different tones quality in a bonang set. Journal of Engineering Science and Technology, 14 (4). pp. 1960-1973. ISSN 1823-4690

Hameed, Husamuldeen Khalid and Wan Hasan, Wan Zuha and Shafie, Suhaidi and Ahmad, Siti Anom and Jaafar, Haslina (2019) A review on surface electromyography-controlled hand robotic devices used for rehabilitation and assistance in activities of daily living. Journal of Prosthetics and Orthotics. pp. 1-11. ISSN 1040-8800; ESSN: 1534-6331

Hameed Sultan, Mohamed Thariq and Safri, Syafiqah Nur Azrie and Md. Shah, Ain Umaira and Jawaid, Mohammad and Lee, Seng Hua and Shahar, Farah Syazwani and Sivasankaran, Praveena Nair (2019) A review on the orthotics and prosthetics and the potential of kenaf composites as alternative materials for ankle-foot orthosis. Journal of the Mechanical Behavior of Biomedical Materials, 99. pp. 169-185. ISSN 1751-6161

Hamid, Hussain and Tan, Ai Ping and Law, Teik Hua and Wong, Shaw Voon (2019) Identification of traffic and roadway variables affecting safe motorcycling along urban roads. Journal of the Society of Automotive Engineers Malaysia, 3 (2). pp. 177-184. ISSN 2600-8092; ESSN: 2550-2239

Hamid, Laith Emad and Syed Mohamed, Syed Abdul Rahman Al-Haddad (2019) Automated leaf alignment and partial shape feature extraction for plant leaf classification. Electronic Letters on Computer Vision and Image Analysis, 18 (1). pp. 37-51. ISSN 1577-5097

Hamidon, Muhammad Hafizal and Hameed Sultan, Mohamed Thariq and Ariffin, Ahmad Hamdan and Md Shah, Ain Umaira (2019) Effects of fibre treatment on mechanical properties of kenaf fibre reinforced composites: a review. Journal of Materials Research and Technology, 8 (3). pp. 3327-3337. ISSN 2238-7854

Hamidon, Munirah Hayati (2019) Smart vertical garden system design and performance for indoor vegetable production. Masters thesis, Universiti Putra Malaysia.

Hamzah, Muhammad Hazwan and Ahmad Asri, Muhammad Fitri and Che Man, Hasfalina and Mohammed, Abdulsalam (2019) Prospective application of palm oil mill boiler ash as a biosorbent: effect of microwave irradiation and palm oil mill effluent decolorization by adsorption. International Journal of Environmental Research and Public Health, 16 (18). art. no. 3453. pp. 1-18. ISSN 1661-7827; ESSN: 1660-4601

Hamzah, Mustafa Kareem (2019) Development of multi-level unseating prevention device for bridges. Doctoral thesis, Universiti Putra Malaysia.

Haridan, N. A. and Yoshida, H. and Mohd Salleh, Mohamad Amran and Siajam, Shamsul Izhar (2019) Carbonization of excess sewage sludge by using super-heated water vapor to make fuel. In: International Conference on Environmental Sustainability and Resource Security (IC-ENSURES 2019), 5-6 Nov. 2019, Kuala Lumpur, Malaysia. (pp. 94-98).

Harith, Hazreen Haizi and Noor Sidin, Noor Haryantie and Abdan, Khalina (2019) A data integration model for multi-agency assets in disaster logistic management. ASM Science Journal, 12. pp. 1-11. ISSN 1823-6782

Haron, Nor Azidawati and Yusuf, Badronnisa and Sulaiman, Mohd Sofiyan and Ab Razak, Mohd Shahrizal and Abu Bakar, Siti Nurhidayu (2019) Assessing river stability and hydraulic geometry of fluvial river in Malaysia. International Journal of Integrated Engineering, 11 (6). pp. 214-223. ISSN 2229-838X; ESSN: 2600-7916

Haron, Nuzul Azam and Law, Teik Hua and Hassim, Salihudin and Eftekhari, Fathollah and Muhammad, Muhammad Tahir and Harun, Aizul Nahar (2019) Strategies to improve communication management within virtual project teams. Pertanika Journal of Science & Technology, 27 (4). pp. 2015-2030. ISSN 0128-7680; ESSN: 2231-8526

Harun @ Ramli, Hafiz Rashidi and Misron, Norhisam and Saripan, M. Iqbal and Bello, Fernando (2019) Development of a haptic feedback actuator for an endovascular interventions simulator interface. In: IEEE International Symposium on Haptic Audio-Visual Environments and Games (HAVE 2019), 3-4 Oct. 2019, Kuala Lumpur, Malaysia. .

Hasan, Intan Helina and Hamidon, Mohd Nizar and Ismail, Alyani and Ismail, Ismayadi and Mohd Azhari, Nur Alin and Azhari, Saman and Mohd Kusaimi, Muhammad Asnawi and Osman, Rosiah (2019) Effect of yttrium iron garnet thick film in fabrication of flexible microstrip patch antenna. In: Electron Devices Technology and Manufacturing Conference (EDTM 2019), 12-15 Mar. 2019, Singapore. (pp. 389-391).

Hasan, Intan Helina and Hamidon, Mohd Nizar and Ismail, Ismayadi and Ismail, Alyani and Mohd Kusaimi, Muhammad Asnawi and Azhari, Saman (2019) Nickel zinc ferrite thick film for optimized performance of flexible patch antenna. In: 2019 International Symposium on Electronics and Smart Devices (ISESD 2019), 8-9 Oct. 2019, Badung-Bali, Indonesia. .

Hashim, Doaa Talib and Hejazi, Farzad and Jaafar, Mohd Saleh and V. Y., Lai and Muhammad Rashid, Raizal Saifulnaz (2019) Performance of base connections for concrete segmental communication tower. International Journal of Civil Engineering and Technology, 10 (2). pp. 2040-2056. ISSN 0976-6308; ESSN: 0976-6316

Hashim, Fazirulhisyam and Abeer, Abdalla Zakaria Ibrahim (2019) An architecture of 5G based on SDN NV wireless network. Indonesian Journal of Electrical Engineering and Computer Science, 14 (2). pp. 725-734. ISSN 2502-4752

Hashim, Norhashila and Zulkifli, Nurazwin and Abdan, Khalina and Hanafi, Marsyita (2019) Application of laser-induced backscattering imaging for predicting and classifying ripening stages of ''Berangan'' bananas. Computers and Electronics in Agriculture, 160. pp. 100-107. ISSN 0168-1699; ESSN: 1872-7107

Hashim, Nurain (2019) Fatigue analysis of woven intraply carbon/kevlar reinforced epoxy hybrid composite at ambient and below ambient temperature. Doctoral thesis, Universiti Putra Malaysia.

Hashim, Nurain and Abang Abdul Majid, Dayang Laila and Mahdi, El-Sadig and Zahari, Rizal and Yidrisa, Noorfaizal (2019) Effect of fiber loading directions on the low cycle fatigue of intraply carbon- Kevlar reinforced epoxy hybrid composites. Composite Structures, 212. pp. 476-483. ISSN 0263-8223; ESSN: 1879-1085

Hassan, Mohamad Zaki and S.M., Sapuan and Roslan, Siti Amni and Abdul Aziz, Sa’ardin and Sarip, Shamsul (2019) Optimization of tensile behavior of banana pseudo-stem (Musa acuminate) fiber reinforced epoxy composites using response surface methodology. Journal of Materials Research and Technology-JMR&T, 8 (4). pp. 3517-3528. ISSN 2238-7854

Hassan, Mohamad Zaki and Salit, Mohd Sapuan and A. Rasid, Zainudin (2019) Thermal degradation and mechanical behavior of banana pseudo-stem reinforced composites. International Journal of Recent Technology and Engineering, 8 (4). pp. 5899-5902. ISSN 2277-3878

Hassan, Mohd Ali and Othman, Mohd Ridzuan and Ibrahim, Izzudin and Samsudin, Mohd Hafif and Ramli, Norhayati and Mohd Yusoff, Mohd Zulkhairi and Shirai, Yoshihito and Idris, Juferi and Mohd Ali, Ahmad Amiruddin (2019) A one-step self-sustained low temperature carbonization of coconut shell biomass produced a high specific surface area biochar-derived nano-adsorbent. Waste Management and Research, 37 (5). pp. 551-555. ISSN 0734-242X; ESSN: 1096-3669

Hassan, Mohd Roshdi and Al-Kodami, Yaser Yahya (2019) TRIZ directed evolution for automobile fuel. In: New Opportunities for Innovation Breakthroughs for Developing Countries and Emerging Economies. Springer, Switzerland, 305 - 313. ISBN 9783030324964; EISBN: 9783030324971

Hassan, Mohd Roshdi and Alemour, Belal Jamal Tawfiq and Badran, Omar (2019) A review of using conductive composite materials in solving lightening strike and ice accumulation problems in aviation. Journal of Aerospace Technology and Management, 11. pp. 1-23. ISSN 2175-9146

Hassan, Siti Nuraini (2019) Development of static standing workstation design dimensions for Malaysian workers. Masters thesis, Universiti Putra Malaysia.

Hermansson, Ayman William (2019) Robust offset-free control of nonlinear systems using model predictive control and integral action. Doctoral thesis, Universiti Putra Malaysia.

Hilal, Yousif Yakoub (2019) Predicting crop yield and field energy output for oil palm using genetic algorithm and neural network models. Doctoral thesis, Universiti Putra Malaysia.

Hilo, Ali and Abu Talib, Abd Rahim and Nfawa, Sadeq Rashid and Sultan, Mohamed Thariq Hameed and Abdul Hamid, Mohd Faisal and Bheekhun, M.I. Nadiir (2019) Heat transfer and thermal conductivity enhancement using graphene nanofluid: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (1). pp. 74-87. ISSN 2289-7879

Hizam, Hashim and Ahmadipour, Masoud and Mohd Radzi, Mohd Amran and Othman, Mohammad Lutfi and Chireh, Nikta (2019) A novel islanding detection technique using modified Slantlet transform in multi-distributed generation. International Journal of Electrical Power and Energy Systems, 112. pp. 460-475. ISSN 0142-0615

Hoon, Yap and Mohd Radzi, Mohd Amran and Al-Ogaili, Ali Saadon (2019) Adaptive linear neural network approach for three-phase four-wire active power filtering under non-ideal grid and unbalanced load scenarios. Applied Sciences, 9 (24). art. no. 5304. pp. 1-25. ISSN 2076-3417

Hoon, Yap and Mohd Radzi, Mohd Amran and Mohd Zainuri, Muhammad Ammirrul Atiqi and Md Zawawi, Mohamad Adzhar (2019) Shunt active power filter: a review on phase synchronization control techniques. Electronics, 8 (7). art. no. 791. pp. 1-20. ISSN 2079-9292

Hozoorbakhsh, Asghar and Hamdi, Mohamed and Mohammed Sarhan, Ahmed Aly Diaa and Ismail, Mohd Idris Shah and Tang, Chak Yin and Tsui, Gary Chi Pong (2019) CFD modelling of weld pool formation and solidification in a laser microwelding process. International Communications in Heat and Mass Transfer, 101. pp. 58-69. ISSN 0735-1933; ESSN: 1879-0178

Huong, Pei Zam and Zainal Abidin, Emilia and Karuppiah, Karmegam and Salit, Mohd Sapuan (2019) Humidity controlling material development from diatomite, waste glass and cockle shell powder: an experimental study. Malaysian Journal of Medicine and Health Sciences, 15 (SP4). pp. 99-105. ISSN 1675-8544; ESSN: 2636-9346

Husin, Nur Azuan and Bejo, Siti Khairunniza and Abdullah, Ahmad Fikri and Mohd Kassim, Muhamad Saufi and Ahmad, Desa (2019) Analysis of changes in oil palm canopy architecture from basal stem rot using terrestrial laser scanner. Plant Disease, 103 (12). pp. 3218-3225. ISSN 0191-2917; ESSN: 1943-7692

Husin, Nur Azuan and Bejo, Siti Khairunniza and Abdullah, Ahmad Fikri and Mohd Kassim, Muhamad Saufi and Ahmad, Desa (2019) Effects of basal stem rot on oil palm inter-frond angles for different severity levels. Journal of Advanced Agricultural Technologies, 6 (2). pp. 113-117. ISSN 2373-423X

Hussain, Mohd Rizal and Ahmad, Siti Anom and Rokhani, Fakhrul Zaman and Ashari, Asmidawati and Hassan, Mohd Khair and Haron, Nuzul Azam and Dolah, Mohd Shahrizal and Raja Ahmad Effendi, Raja Ahmad Azmeer and Ramli, Saiful Hasley (2019) Developing advanced appliances control system in toilet and bathroom for aged generation: FGD preliminary findings. International Journal of Research and Innovation in Social Science (IJRISS), 3 (7). pp. 439-442. ISSN 2454-6186

Hussein, Chilabi Haider Jaafar (2019) Harvesting energy from planetary gear using piezoelectric material. Masters thesis, Universiti Putra Malaysia.

Hussin, Neam Tariq (2019) Computer vision automation system for sorting partially overlapping tiles. Masters thesis, Universiti Putra Malaysia.

Ibraheem, Sameer Adnan and Abdan, Khalina and Lee, Ching Hao (2019) Simulation study for the compressed BMC materials of kenaf/coir reinforced unsaturated polyester: flow behaviour and the effects of charges shapes studies. Pertanika Journal of Science & Technology, 27 (S1). pp. 211-223. ISSN 0128-7680; ESSN: 2231-8526

Ibrahim, Mohamed Ibrahim J. (2019) Characterization of corn/sugar palm fiber-reinforced corn starch biopolymer hybrid composites. Doctoral thesis, Universiti Putra Malaysia.

Ibrahim, Nur Ul Atikah and Abd Aziz, Samsuzana and Hashim, Norhashila and Jamaludin, Diyana and Al-Khaled, Al-Fadhl Yahya Khaled (2019) Dielectric spectroscopy of palm olein during batch deep frying and their relation with degradation parameters. Journal of Food Science, 84 (4). pp. 792-797. ISSN 0022-1147; ESSN: 1750-3841

Idris, Sarah and Shamsudin, Rosnah and Mokhtar, Mohd Noriznan and Mohd Nor, Mohd Zuhair and Abd Gani, Siti Salwa (2019) Comparative proximate composition and cyanide contents of each parts of local cassava (Manihot esculenta Crantz). In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 118-122).

Idrus, Nor Faeqah (2019) Synthesis of pentaerythritol ester lubricants from palm oil methyl ester for refrigeration system. Doctoral thesis, Universiti Putra Malaysia.

Ishak, Asnor Juraiza and Nozad Mahmood, Mahmood Sarmad (2019) Eye in hand robot arm based automated object grasping system. Periodicals of Engineering and Natural Sciences, 7 (2). pp. 555-556. ISSN 2303-4521

Ishak, Hazwani and Muda, Noor Azura and Ismail, Mohd Halim Shah and Izhar, Shamsul and Yoshida, Hiroyuki (2019) Rapid processing of abandoned oil palm trunks into sugars and organic acids by sub-critical water. Processes, 7 (9). 16(1)-16(16). ISSN 2227-9717

Ishak, Muhammad Ammar and Mohd Roslim, Muhammad Huzaifah and Salit @ Sinon, Mohd Sapuan and Leman, Zulkiflle (2019) Mechanical properties of environment-friendly sugar palm fibre reinforced vinyl ester composites at different fibre arrangements. EnvironmentAsia, 12 (1). pp. 25-35. ISSN 1906-1714; ESSN: 2586-8861

Ishak, Nur Arnisah and Baharuddin, Azhari Samsu and Ab Razak, Nor Asma (2019) Extraction of tannin and antioxidant activities from Musa acuminata cv. Cavendish peel by using various solvent. Asia-Pacific Journal of Molecular Biology and Biotechnology, 27 (2 suppl.). ISSN 0128-7451; ESSN: 2672-7277

Isma'ila, Mukhtar and Leman, Zulkiflle and Zainudin, Edi Syams and Ishak, Mohamad Ridzwan (2019) Hybrid and nonhybrid laminate composites of sugar palm and glass fibre-reinforced polypropylene: effect of alkali and sodium bicarbonate treatments. International Journal of Polymer Science, 2019. art. no. 230592. pp. 1-12. ISSN 1687-9422; ESSN: 1687-9430

Ismail, Ahmad Safwan and Jawaid, Mohammad and Naveen, Jesuarockiam (2019) Void content, tensile, vibration and acoustic properties of kenaf/bamboo fiber reinforced epoxy hybrid composites. Materials, 12 (13). art. no. 2094. pp. 1-14. ISSN 1996-1944

Ismail, Asmida and Ahmad, Siti Anom and Che Soh, Azura and Hassan, Mohd Khair and Harith, Hazreen Haizi (2019) Improving Convolutional Neural Network (CNN) architecture (miniVGGNet) with batch normalization and learning rate decay factor for image classification. International Journal of Integrated Engineering, 11 (4). pp. 51-59. ISSN 2229-838X; ESSN: 2600-7916

Ismail, Idrus Salimi and Abdul Latiff, Nurul Adilah and Rokhani, Fakhrul Zaman and Abd Aziz, Samsuzana (2019) A review on performances evaluation of low power wide area networks technology 2019. In: Lecture Notes in Electrical Engineering. Springer, Switzerland, 343 - 349. ISBN 9789811364464

Ismail, Khairul Izwan and Hameed Sultan, Mohamed Thariq and Md. Shah, Ain Umaira and Jawaid, Mohammad and Safri, Syafiqah Nur Azrie (2019) Low velocity impact and compression after impact properties of hybrid bio-composites modified with multi-walled carbon nanotubes. Composites Part B: Engineering, 163. pp. 455-463. ISSN 1359-8368; ESSN: 1879-1069

Ismail, Muhammad Faizzuddin and Hameed Sultan, Mohamed Thariq and Ariffin, Ahmad Hamdan and Md. Shah, Ain Umaira and Jawaid, Mohammad (2019) Low velocity impact behaviour and post-impact characteristics of kenaf/glass hybrid composites with various weight ratios. Journal of Materials Research and Technology, 8 (3). pp. 2662-2673. ISSN 2238-7854

Ismail, Nazarul Abidin and Ismail, Mohd Idris Shah and Mohd Radzman, Mohamad Aizat and Mohd Ariffin, Mohd Khairol Anuar and As'arry, Azizan (2019) Parametric optimization of robot-based single point incremental forming using Taguchi method. International Journal of Integrated Engineering, 11 (1). pp. 217-224. ISSN 2229-838X; ESSN: 2600-7916

Ismail, Ruqayyah (2019) Comparative behaviour of hollow-reinforced concrete column strengthened with carbon fibre-reinforced polymer and shape memory alloy. Doctoral thesis, Universiti Putra Malaysia.

Ismail, Ruqayyah and Muhammad Rashid, Raizal Saifulnaz and Chan, Wong Chien and Jaafar, Mohd Saleh and Hejazi, Farzad (2019) Compressive behavior of concrete cylinder fully and partially confined by carbon fibre-reinforced polymer (CFRP). Construction and Building Materials, 201. pp. 196-206. ISSN 0950-0618

Ismail, Zuliana (2019) Enhanced attitude control structure for small satellites with reaction wheels. Doctoral thesis, Universiti Putra Malaysia.

Isola, Ajibola Ismaila and Mansor, Shattri and Shafri, Helmi and Pradhan, Biswajeet and Mansor, Yaakob (2019) Impact of external forces on the quality of digital elevation model derived from drone technology. International Journal of Geoinformatics, 15 (1). pp. 81-91. ISSN 1686-6576; ESSN: 2673-0014

Issa, Mohammed Abdullah and Zainal Abidin, Zurina and Sobri, Shafreeza and Abdul Rashid, Suraya and Mahdi, Mohd Adzir and Ibrahim, Nor Azowa and Pudza, Musa Yahaya (2019) Facile synthesis of nitrogen-doped carbon dots from lignocellulosic waste. Nanomaterials, 9 (10). art. no. 1500. pp. 1-23. ISSN 2079-4991

Issa Al-Badri, Mohammed Abdullah (2019) Nitrogen-doped carbon dots from empty fruit bunch carboxymethylcellulose for selective detection of copper ions in aqueous media. Doctoral thesis, Universiti Putra Malaysia.

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Osman, Miszaina (2019) Evaluation of lightning current parameters using measured lightning induced voltage on distribution power lines. In: 11th Asia-Pacific International Conference on Lightning (APL 2019), 12-14 June 2019, Hong Kong, China. .

J., Sahari and M. A., Maleque and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Mat Jusoh, Suriani and L., Yusriah (2019) Review of development and characterization of sugar palm fiber reinforced polymer composites. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton, 15 - 40. ISBN 9781498753029

Jaafar, Che Nor Aiza and Zainol, Ismail (2019) Effects of silica addition and alkaline surface treatment of kenaf fibre on mechanical properties of hybrid epoxy/silica/kenaf composites using hand lay-up method. Malaysian Journal of Microscopy, 15 (1). pp. 177-184. ISSN 1823-7010; ESSN: 2600-7444

Jaafar, Che Nor Aiza and Zainol, Ismail and Yang, W. X. (2019) Effects of binders and internal lubricant compositions on mechanical properties of dry pressed sintered alumina. Der Pharma Chemica, 11 (2). pp. 20-24. ISSN 0975-413X

Jahari, Mahirah and Dimas, F. A. R. and Widodo, S. and Suzuki, T. and Ogawa, Y. and Kondo, N. (2019) Rice quality assessment using fluorescence imaging technique. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 152-155).

Jamali, Nur Syakina and Md Jahim, Jamaliah and O-Thong, Sompong and Jehlee, Aminee (2019) Hydrodynamic characteristics and model of fluidized bed reactor with immobilized cells on activated carbon for biohydrogen production. International Journal of Hydrogen Energy, 44 (18). pp. 9256-9271. ISSN 0360-3199; ESSN: 1879-3487

Jamaludin, Hafiz (2019) Active tremor control on human hand tremor test rig model using P+fuzzy logic controller. Masters thesis, Universiti Putra Malaysia.

Jamaludin, Muhamad Nurjafni and Mohd Basri, Mohd Salahuddin (2019) Misai kucing plotting arrangement under solar PV panel and harvester machine efficiency – a comparative study. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 258-261).

Japar, Sahari and M. A., Maleque and Salit, Mohd Sapuan (2019) Sugar palm starch biopolymer: extraction and processing. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton, 41 - 55. ISBN 9781498753029; EISBN: 9780429443923

Japar, Sahari and Maleque, M. A. and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Jumaidin, Ridhwan (2019) Performance of thermoplastic sugar palm starch biopolymers. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, London, 57 - 70. ISBN 9781498753029: EISBN 9780429443923

Jawaid, Mohammad and Hameed Sultan, Mohamed Thariq and Saba, Naheed and Lau, Kia Kian (2019) A review on processing techniques of bast fibers nanocellulose and its polylactic acid (PLA) nanocomposites. International Journal of Biological Macromolecules, 121. pp. 1314-1328. ISSN 0141-8130; ESSN: 1879-0003

Jebril, Akram Hussein A. (2019) Image transmission over LoRa for mangrove monitoring. Masters thesis, Universiti Putra Malaysia.

Jesuarockiam, Naveen and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan and Abdul Majid, M. S. (2019) Thermal degradation and viscoelastic properties of Kevlar/Cocos nucifera sheath reinforced epoxy hybrid composites. Composite Structures, 219. pp. 194-202. ISSN 0263-8223; ESSN 1879-1085

Jia, Tian Chen and Chuah, Luqman Abdullah and Md. Tahir, Paridah (2019) Biomass valorization for better aviation environmental impact through biocomposites and aviation biofuel. In: Structural Health Monitoring of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites. Elsevier, United Kingdom, 19 - 31. ISBN 9780081022917

Johari, Ahmad Nazrin (2019) Influence of CaCO₃ in glass fibre/unsaturated polyester composite on thermal and flexural creep behaviour. Masters thesis, Universiti Putra Malaysia.

Jumadi, Mohd Shahrul Azwan and Jamaludin, Diyana (2019) Nondestructive measurement of rockmelon fruit properties using Electrical Impedance Spectroscopy (EIS) technique. ASM Science Journal, 12. pp. 20-26. ISSN 1823-6782

Jumaidin, Ridhwan and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan (2019) Thermoplastic sugar palm starch composites. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton, Florida, 165 - 188. ISBN 9781498753029; EISBN 9780429443923

Jusoh, Yusmadi Yah and Abdullah, Rusli and Sidi, Fatimah and Ishak, Iskandar and Tugiran, Yusnita and Marhaban, Mohammad Hamiruce and Napis, Suhaimi (2019) Data and information sharing model in enhancing research collaboration among researchers: a preliminary study. In: 5th International Conference on Information Management (ICIM 2019), 24-27 Mar. 2019, Cambridge, United Kingdom. (pp. 60-63).

Kadhem, Athraa Ali and Abdul Wahab, Noor Izzri and Abdalla, Ahmed N. (2019) Differential evolution optimization algorithm based on generation systems reliability assessment integrated with wind energy. In: 5th International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET 2019), 26-27 Aug. 2019, Istanbul, Turkey. .

Kak, D. Wing and Abd Rahman, Anita and Mohd Nasir, Mohd Nizlan and I., Normala and Abdul Jalil, Nawal Aswan and Wong, Shaw Voon (2019) Comparison of neck muscle electromyography activity in response to external force between static and dynamic loading. Journal of Mechanics in Medicine and Biology, 19 (4). ISSN 0219-5194; ESSN: 1793-6810

Kaky, Kawa M. and Şakar, Erdem and Akbaba, Ugur and Kasapoglu, Ahmet Emre and Sayyed, Mohammed I. and Gur, Emre and Baki, Sharudin Omar and Mahdi, Mohd Adzir (2019) X-ray photoelectron spectroscopy (XPS) and gamma-ray shielding investigation of boro-silicate glasses contained alkali/alkaline modifier. Results in Physics, 14. pp. 1-8. ISSN 2211-3797

Kalantar, Bahareh and Abdul Halin, Alfian and Al-Najjar, Husam Abdulrasool H. and Mansor, Shattri and Genderen, John L. Van and M. Shafri, Helmi Zulhaidi and Zand, Mohsen (2019) A framework for multiple moving objects detection in aerial videos. In: Spatial Modeling in GIS and R for Earth and Environmental Sciences. Elsevier, United States, 573 - 588. ISBN 9780128152263

Kalantar, Bahareh and Ueda, Naonori and Lay, Usman Salihu and Al-Najjar, Husam Abdulrasool H. and Abdul Halin, Alfian (2019) Conditioning factors determination for landslide susceptibility mapping using support vector machine learning. In: 2019 IEEE International Geoscience and Remote Sensing Symposium (IGARSS 2019), 28 July-2 Aug. 2019, Yokohama, Japan. (pp. 9626-9629).

Kamal, Md Rowshon and Dlamini, Nkululeko Simeon and Mojid, M. A. and Adib, M. N. M. and Amin, M. S. M. and Lai, Sai Hin (2019) Modeling climate-smart decision support system (CSDSS) for analyzing water demand of a large-scale rice irrigation scheme. Agricultural Water Management, 216. pp. 138-152. ISSN 0378-3774

Kamal, Md. Rowshon and Galavi, Hadi and Mirzaei, Majid and Ebrahimian, Mahboubeh (2019) Assessing the contribution of different uncertainty sources in streamflow projections. Theoretical and Applied Climatology, 137. pp. 1-15. ISSN 1434-4483; ESSN: 0177-798X

Kamal, Md. Rowshon and Muhammed, Hadi Hamaaziz and Mojid, Mohammad Abdul and Anlauf, Ruediger and Mohd Soom, Mohd Amin (2019) Two-dimensional modeling of water distribution under capillary wick irrigation system. Pertanika Journal of Science & Technology, 27 (1). pp. 205-223. ISSN 0128-7680; ESSN: 2231-8526

Kamaruddin, Fatin Amirah and Kim Huat, Bujang and Anggraini, Vivi and Nahazanan, Haslinda (2019) Modified natural fiber with lime and alkaline activation treated marine clay. International Journal of GEOMATE, 16 (58). pp. 69-75. ISSN 2186-2990; ESSN: 2186-2982

Kamarudin, Nor Hafeezah (2019) Development of predictive model for stoop and squat postures on physiological and psychophysical responses in manual lifting tasks. Doctoral thesis, Universiti Putra Malaysia.

Kamarudin, Saidatul Izyanie and Ismail, Alyani and Sali, Aduwati and Ahmad, Mohd Yazed (2019) Magnetic resonance coupling for 5G WPT applications. Bulletin of Electrical Engineering and Informatics, 8 (3). pp. 1036-1046. ISSN 2089-3191; ESSN: 2302-9285

Kamarudin, Siti Hasnah and Abdullah, Luqman Chuah and Aung, Min Min and Ratnam, Chantara Thevy (2019) Mechanical and physical properties of kenaf-reinforced poly(lactic acid) plasticized with epoxidized jatropha oil. BioResources, 14 (4). pp. 9001-9020. ISSN 1930-2126

Kamarudin, Siti Hasnah and Jusoh, Emiliana Rose and Abdullah, Luqman Chuah and Ismail, Mohd Halim Shah and Min, Min Aung and Ratnam, Chantara Thevy (2019) Thermal and dynamics mechanical analysis of polypropylene blown films with crude palm oil as plasticizer. Indonesian Journal of Chemistry, 19 (3). pp. 545-555. ISSN 1411-9420; ESSN: 2460-1578

Kamarul Zaman, Amanina Amani and Shamsudin, Rosnah and Mohd Adzahan, Noranizan and Sulaiman, Alifdalino (2019) UV-C effect on microbial disinfection of pineapple-mango juice blend using Dean-vortex technology. Journal of Food Science, 3 (4). pp. 285-294. ISSN 0022-1147; ESSN: 1750-3841

Kamarul Zaman, Amanina Amani and Shamsudin, Rosnah and Sulaiman, Alifdalino and Mohd Adzahan, Noranizan and Sulaiman, Alifdalino (2019) Comparison of UV-C and thermal pasteurisation for the quality preservation of pineapple-mango juice blend. Food Research, 3 (4). pp. 362-372. ISSN 2550-2166

Kamuri, Firdaus and Zainal Abidin, Zurina and Yaacob, Mohd Hanif and Hamidon, Mohd Nizar and Md Yunus, Nurul Amziah and Kamarudin, Suryani (2019) Separation and detection of escherichia coli and saccharomyces cerevisiae using a microfluidic device integrated with an optical fibre. Biosensors, 9 (1). pp. 1-18. ISSN 2079-6374

Kamuri, Mohd Firdaus and Zainal Abidin, Zurina and Lee, Hao Jun and Yaacob, Mohd Hanif and Hamidon, Mohd Nizar and Md Yunus, Nurul Amziah and Kamarudin, Suryani (2019) Performance evaluation of free-space fibre optic detection in a lab-on-chip for microorganism. Journal of Sensors, 2019. art. no. 1026905. pp. 1-10. ISSN 1687-725X; ESSN: 1687-7268

Kania, Dina (2019) Polyol esters as thinner and biolubricant additive for synthetic-based drilling fluid. Doctoral thesis, Universiti Putra Malaysia.

Kareem, Husam and Hashim, Shaiful Jahari and Sali, Aduwati and Taha, Omer W. and Kazim, Issraa J. and Shukri, Shaimaa (2019) MCRP: multiple chain routing protocol for energy efficiency in homogeneous wireless sensor networks. In: 2nd International Conference on Advanced Science and Engineering (ICOASE 2019), 2-4 Apr. 2019, University of Zakho and Duhok Polytechnic University, Kurdistan Region, Iraq. (pp. 170-175).

Karim, N. A. and Ramli, Muhammad Mahyiddin and Ghazali, C. M. R. and Mohtar, Mohd Nazim (2019) Synthetic graphite production of oil palm trunk chip at various heating rate via pyrolisis process. Materials Today, 16 (4). pp. 2088-2095. ISSN 1369-7021; ESSN: 1873-4103

Karimzadeh, Atefeh and Ayatollahi, Majid Reza and Koloor, Seyed Saeid Rahimian and Abdul Razak, Bushroa and Yahya, Mohd Yazid and Tamin, Mohd Nasir (2019) Assessment of compressive mechanical behavior of Bis-GMA polymer using hyperelastic models. Polymers, 11 (10). art. no. 1571. pp. 1-17. ISSN 2073-4360

Kee, Ya Wern (2019) Crown counting and mapping of missing oil palm tree using airborne imaging system. Masters thesis, Universiti Putra Malaysia.

Khairi, Kharina (2019) Dispersion compensation positioning using chirped fiber bragg gratings for repeaterless transmission system. Doctoral thesis, Universiti Putra Malaysia.

Khairudin, Nurulhuda and Mohd Hanif, Ahmad Husni and Mohamed Zawawi, Mohamed Azwan and Zakaria, Mohamad Pauzi and Struik, Paul C. and Keesman, Karel J. (2019) Temporal variation of ammonium in Sulfic Tropaquept cultivated with rice in experimental pots. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 32-35).

Khairul Anuar, Norshafiqah and Che Man, Hasfalina and Hamzah, Muhammad Hazwan and Idrus, Syazwani and Nik Daud, Nik Norsyahariati and Wan Ab. Karim Ghani, Wan Azlina (2019) Methane production from anaerobic co-digestion of sewage sludge and decanter cake. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 49-53).

Khaksar, Weria and Tang, Sai Hong and Mohamed Sahari, Khairul Salleh and Khaksar, Mansoor and Toressen, Jim (2019) Sampling-based online motion planning for mobile robots: utilization of Tabu search and adaptive neuro-fuzzy inference system. Neural Computing and Applications, 31. 1275 - 1289. ISSN 0941-0643; ESSN: 1433-3058

Khaled, Nada and Alsabhan, Turki and Mahmud, Adalina (2019) Implications of artificial intelligence in healthcare delivery in the hospital settings: a literature review. International Journal of Public Health and Clinical Sciences (IJPHCS), 6 (5). pp. 1-13. ISSN 2289-7577

Khalid, Nurul Izzah and Ab. Aziz, Norashikin (2019) Challenges in cleaning for frozen food SMEs: current and suggested cleaning program. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 86-90).

Khalid, Nurul Izzah and Sulaiman, Umi Suhaila and Nasiruddin, N. A. and Hadran, M. M. and Ab Aziz, Norashikin and Mahmud @ Ab Rashid, Nor Khaizura and Noor Hasnan, Noor Zafira and Taip, Farah Saleena and Sobri, Shafreeza (2019) Integrating cleaning studies with industrial practice: case study of an effective cleaning program for a frozen meat patties SME factory. Journal of Cleaner Production, 235. pp. 688-700. ISSN 0959-6526; ESSN: 1879-1786

Khan, Ahmed Ali M. (2019) Development of project success model using partial least squares - structural equation modeling for Malaysia SMES. Doctoral thesis, Universiti Putra Malaysia.

Khan, Imran and Henna, Shagufta and Anjum, Nasreen and Sali, Aduwati and Rodrigues, Jonathan and Khan, Yousaf and Khattak, Muhammad Irfan and Altaf, Farhan (2019) An efficient precoding algorithm for mmWave massive MIMO systems. Symmetry, 11 (9). art. no. 1099. pp. 1-16. ISSN 2073-8994

Khezri, Ramin and Wan Ab. Karim Ghani, Wan Azlina and Awang Biak, Dayang Radiah and Yunus, Robiah and Silas, Kiman (2019) Experimental evaluation of Napier grass gasification in an autothermal bubbling fluidized bed reactor. Energies, 12 (8). art. no. 1517. pp. 1-18. ISSN 1996-1073

Khezri, Ramin and Wan Ab. Karim Ghani, Wan Azlina and Soltani, Salman Masoudi and Awang Biak, Dayang Radiah and Yunus, Robiah and Silas, Kiman and Shahbaz, Muhammad and Motlagh, Shiva Rezaei (2019) Computational fluid dynamics simulation of gas–solid hydrodynamics in a bubbling fluidized-bed reactor: effects of air distributor, viscous and drag models. Processes, 7 (8). art. no. 524. pp. 1-16. ISSN 2227-9717

Khudher, Shaker Mahmood (2019) Protection scheme of AC-DC converter with passive filter for electric vehicle charging system. Doctoral thesis, Universiti Putra Malaysia.

Koo, Lee Feng and Sarbini, Izzatul Nabila and Yiu, Pang Hung and Naning @ Zin, Fatin Hana and Wong, Tze Jin (2019) An analysis for chosen plaintext attack in elliptic curve cryptosystem based on second order lucas sequence. International Journal of Scientific and Technology Research, 8 (11). pp. 1193-1196. ISSN 2277-8616

L., Jia Hao and F., Chin Lian and Hejazi, Farzad and Mohd. Nasir, Noor Azline (2019) Study of properties and strength of no-fines concrete. IOP Conference Series: Earth and Environmental Science, 357. pp. 1-13. ISSN 1755-1307; ESSN: 1755-1315

Lakshminarayana, G. and Abbas, Bashar Khudhair and Omar Baki, Sharudin and Lira, A. and Caldiño, U. and Meza-Rocha, A. N. and Falcony, C. and Camarillog, E. and Kityk, I. V. and Mahdi, Mohd Adzir (2019) Er3+/Dy3+ codoped B2O3-TeO2-PbO-ZnO-Li2O-Na2O glasses: Optical absorption and fluorescence features study for visible and near-infrared fiber laser applications. Journal of Non-Crystalline Solids, 503-504. pp. 366-381. ISSN 0022-3093; ESSN: 1873-4812

Lakshminarayana, G. and Sayyed, M. I. and Omar Baki, Sharudin and Lira, A. and Dong, Mengge G. and Kityk, I. V. and Abbas, Bashar Khudhair and Mahdi, Mohd Adzir (2019) Borotellurite glasses for gamma-ray shielding: an exploration of photon attenuation coefficients, structural, and thermal properties. Journal of Electronic Materials, 48 (2). pp. 930-941. ISSN 0361-5235; ESSN: 1543-186X

Lau, Kia Li (2019) Performance of amidoxime-modified poly(acrylonitrile- Co-acrylic acid) for removal of boron in aqueous solution. Masters thesis, Universiti Putra Malaysia.

Lau, Kuen Yao and Ker, Pin Jern and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2019) Long-term stability and sustainability evaluation for mode-locked fiber laser with graphene/PMMA saturable absorbers. Optics Communications, 435. pp. 251-254. ISSN 0030-4018

Lau, Kuen Yao and Ker, Pin Jern and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2019) Mode-locked fiber laser in C-band region for dual-wavelength ultrashort pulses emission using carbon nanotube saturable absorber. Chinese Optics Letters, 17 (5). art. no. 051401. pp. 1-4. ISSN 1671-7694

Lau, Kuen Yao and Suhailin, Fariza Hanim and Zainol Abidin, Nadiah Husseini and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2019) Continuos-wave pumping supercontinuum generation in random distributed feedback laser cavity. IEEE Photonics Journal, 11 (4). art. no. 1503707. pp. 1-7. ISSN 1943-0655

Lau, Kuen Yao and Yasin, Sharon Zen Muhammad and Ker, Pin Jern and Mansoor, Amilia and Abdul Rashid, Hairul Azhar and Mustapha Kamil, Yasmin and Mahdi, Mohd Adzir (2019) L-band Q-switched fiber laser with gallium/thulium-doped silica fiber saturable absorber. Optics and Laser Technology, 119. art. no. 105615. pp. 1-7. ISSN 0030-3992

Lau, Kuen Yao and Zainol Abidin, Nadiah Husseini and Cholan, Noran Azizan and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2019) Dual-wavelength thulium/holmium-doped fiber laser generation in 2 µm region with high side-mode suppression ratio. Journal of Optics, 21 (4). art. no. 045701. ISSN 2040-8978; ESSN: 2040-8986

Lay, Usman Salihu (2019) Modelling of optimized hybrid debris flow using airborne laser scanning data in Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Lay, Usman Salihu and Pradhan, Biswajeet and Md Yusoff, Zainuddin and Abdullah, Ahmad Fikri and Aryal, Jagannath and Park, Hyuck Jin (2019) Data mining and statistical approaches in debris-flow susceptibility modelling using airborne LiDAR data. Sensors, 19 (16). pp. 1-32. ISSN 1424-8220

Lee, Chu Liang (2019) Quiescent current reduction of self-compensated low-dropout voltage regulator. Doctoral thesis, Universiti Putra Malaysia.

Lee, Han Kee and Talib, Zainal Abidin and Mamat @ Mat Nazir, Md Shuhazlly and Wang, Enze and Lim, Hong Ngee and Mahdi, Mohd Adzir and Ng, Eng Khoon and Mohd Yusoff, Norita and Al-Jumaili, Batool Eneaze and Liew, Josephine Ying Chyi (2019) Effect of sodium hydroxide concentration in synthesizing zinc selenide/graphene oxide composite via microwave-assisted hydrothermal method. Materials, 12 (14). art. no. 2295. pp. 1-10. ISSN 1996-1944

Lee, Sin Yee and Abdullah, Luqman Chuah and Abdul Rahman, Russly and Abas, Faridah and Chong, Gun Hean (2019) Role of polymers as crystal growth inhibitors in coprecipitation via solutionenhanced dispersion by supercritical fluids (SEDS) to improve andrographolide dissolution from standardized Andrographis paniculata extract. Journal of Drug Delivery Science and Technology, 50. pp. 145-154. ISSN 1773-2247; ESSN: 2588-8943

Lee, Siong Hoong (2019) Impact of inlet slug flow on horizontal gas-liquid separator. Doctoral thesis, Universiti Putra Malaysia.

Lee, Siong Hoong and Choong, Thomas S. Y. and Abdullah, Luqman Chuah and Abdul Razak, Mus’ab and Ban, Zhen Hong (2019) Experimental and CFD modelling: impact of the inlet slug flow on the horizontal gas–liquid separator. Energies, 12 (1). art. no. 41. pp. 1-32. ISSN 1996-1073

Liew, Jiun Terng (2019) Adaptive medium access control protocol of Wifi-Halow for home machine-to-machine network. Doctoral thesis, Universiti Putra Malaysia.

Liew, Jiun Terng and Hashim, Fazirulhisyam and Sali, Aduwati and A. Rasid, Mohd Fadlee and Jamalipour, Abbas (2019) Probability-based opportunity dynamic adaptation (PODA) of contention window for home M2M networks. Journal of Network and Computer Applications, 144. pp. 1-12. ISSN 1095-8592

Lim, Chong Lye (2019) Cryogenic pipe flow simulation for liquid nitrogen under steady state conditions. Doctoral thesis, Universiti Putra Malaysia.

Lim, Wei Jie and Chin, Nyuk Ling and Yusof, Yus Aniza and Yahya, Azmi and Tee, Tuan Poy (2019) Modelling of pilot-scale anaerobic food wastes composting process with dry leaves or cow manure. Pertanika Journal of Science & Technology, 27 (1). pp. 421-442. ISSN 0128-7680; ESSN: 2231-8526

Lim, Yang Wei and Hashim, Shaiful Jahari and Kamsani, Noor 'Ain and Mohd Sidek, Roslina and Rokhani, Fakhrul Zaman (2019) Analysis and modeling of ASIC area at early-stage design for standard cell library selection. In: 2019 IEEE International Symposium on Circuits and Systems (ISCAS), 26-29 May 2019, Sapporo, Japan. .

Lockman, Nuradila Athirah and Hashim, Norhashila and Onwude, Daniel I. (2019) Laser-based imaging for cocoa pods maturity detection. Food and Bioprocess Technology, 12. pp. 1928-1937. ISSN 1935-5130; ESSN: 1935-5149

Loo, Shing Yan and Amiri, Ali Jahani and Mashohor, Syamsiah and Tang, Sai Hong and Zhang, Hong (2019) CNN-SVO: improving the mapping in semi-direct visual odometry using single-image depth prediction. In: 2019 International Conference on Robotics and Automation (ICRA), 20-24 May 2019, Montreal, Canada. (pp. 5218-5223).

M. Amin, Nurhusni (2019) Production of sugars from sago bark using subcritical water treatment. Masters thesis, Universiti Putra Malaysia.

M. Amin, Nurhusni and Sabli, Nordin and Siajam, Shamsul Izhar and Yoshida, Hiroyuki (2019) Sago wastes and its applications. Pertanika Journal of Science & Technology, 27 (4). pp. 1841-1862. ISSN 0128-7680; ESSN: 2231-8526

M. J., Halimatul and Sapuan, Salit M. and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and R. A., Ilyas (2019) Water absorption and water solubility properties of sago starch biopolymer composite films filled with sugar palm particles. Polimery, 64 (9). pp. 27-35. ISSN 0032-2725

M. T., Mastura and Salit, Mohd Sapuan (2019) Product development of sugar palm composites: from concept to fabrication. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton, 221 - 244. ISBN 9781498753029; EISBN: 9780429443923

M. T., Noorellimia and W., Aimrun and M. M. Z., Azwan and Abdullah, A. F. (2019) Geoelectrical parameters for the estimation of hydrogeological properties. Arabian Journal of Geosciences, 12 (2). art. no. 62. ISSN 1866-7511; ESSN: 1866-7538

M. Tobib, Hasyuzariza and Rostam, Hamzah and Mossa, Muntasser A. A. and Hairuddin, Abdul Aziz and Mat Noor, Muhamad (2019) The performance of an HCCI-DI engine fuelled with palm oil-based biodiesel. IOP Conference Series: Materials Science and Engineering, 469. pp. 1-9. ISSN 1757-8981; ESSN: 1757-899X

M. Z., Jurij and Mohd Noor, Elya and Mohd Rafie, Azmin Shakrine and Marzuki, Omar Faruqi and Saad, Mohd Rashdan and Azrad, S. (2019) Development and testing of open-jet wind tunnel for quadrotor flight testing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (2). pp. 304-315. ISSN 2289-7879

Magaidi, Amer M. (2019) Aerodynamic performance of magnus wind turbine with turbine supportive structure. Doctoral thesis, Universiti Putra Malaysia.

Mageed, Alyaa Khadhier and Awang Biak, Dayang Radiah and Ali, Salmiaton and Siajam, Shamsul Izhar and Abdul Razak, Mus’ab (2019) Nitrogen doped graphene-supported trimetallic CuNiRu nanoparticles catalyst for catalytic dehydrogenation of cyclohexanol to cyclohexanone. Journal of King Saud University - Science, 31 (4). pp. 878-885. ISSN 1018-3647

Maghami, Mohammad Reza (2019) Development of fuzzy logic for demand response and storage management in hybrid energy system. Doctoral thesis, Universiti Putra Malaysia.

Mahamud, Siti Nur Atikah (2019) Gasification of lipid-extracted algae and fucoidan- extracted seaweeds for syngas production. Masters thesis, Universiti Putra Malaysia.

Mahamud, Siti Nur Atikah and Rushdan, Ahmad Ilyas and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams and Ibrahim, R. and Mohd Afdzaluddin, Atiqah and Nainar, Mohamed Ansari M. and Jumaidin, Ridhwan (2019) Degradation and physical properties of sugar palm starch/ sugar palm nanofibrillated cellulose bionanocomposite. Polimery, 64 (10). pp. 27-36. ISSN 0032-2725

Mahandran, Sanggithapriya and Yoshida, Hiroyuki and Sabli, Nordin and Siajam, Shamsul Izhar (2019) Effect of physico-chemical characteristic of water in sub-critical condition towards structural conversion of mesocarp fiber. In: International Conference on Environmental Sustainability and Resource Security (IC-ENSURES 2019), 5-6 Nov. 2019, Kuala Lumpur, Malaysia. (pp. 310-314).

Mairghany, Modather and Yahya, Azmi and Adam, Nor Maria and Mat Su, Ahmad S. and W., Aimrun and Elsoragaby, Suha (2019) Rotary tillage effects on some selected physical properties of fine textured soil in wetland rice cultivation in Malaysia. Soil and Tillage Research, 194. art. no. 104318. pp. 1-11. ISSN 0167-1987; ESSN: 1879-3444

Majhool, Alhussein Arkan and Zainol, Ismail and Syed Abdul Azziz, Saripah Salbiah and Jaafar, Che Nor Aziza and Jahil, Mustafa Mudhafar (2019) Mechanical properties improvement of epoxy composites by natural hydroxyapatite from fish scales as a fillers. International Journal of Research in Pharmaceutical Sciences, 10 (2). pp. 1424-1429. ISSN 0975-7538

Mamdouh, Ahmed and Safiee, Nor Azizi and Hejazi, Farzad and Azarkerdar, Arash (2019) Application of waste from steel industry to construction material: a review. IOP Conference Series: Earth and Environmental Science, 357. pp. 1-11. ISSN 1755-1307; ESSN: 1755-1315

Mansor, Maisarah (2019) Development of all-fiber laser intracavity with tapered biosensor. Masters thesis, Universiti Putra Malaysia.

Mansor, Nur Suhaili (2019) Development of geographical weightage regression model for urban crime in Sungai Petani, Kedah, Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Manzoor, Sama (2019) Comparison between convection and micro wave oven drying of Carica papaya L. peel and characterization of the powdered peel. Masters thesis, Universiti Putra Malaysia.

Manzoor, Sama and Yusof, Yus Aniza and Chin, Nyuk Ling and Mohamed Amin Tawakkal, Intan Syafinaz and Ahmed, Mohamed Fikry Mohamed and Chang, Lee Sin (2019) Quality characteristics and sensory profile of stirred yogurt enriched with papaya peel powder. Pertanika Journal of Tropical Agricultural Science, 42 (2). pp. 519-533. ISSN 1511-3701; ESSN: 2231-8542

Manzoor, Sama and Yusof, Yus Aniza and Chin, Nyuk Ling and Mohamed Amin Tawakkal, Intan Syafinaz and Ahmed, Mohamed Fikry Mohamed and Chang, Lee Sin (2019) Thin-layer drying characteristics of papaya (Carica papaya) peel using convection oven and microwave drying. Pertanika Journal of Science & Technology, 27 (3). pp. 1207-1226. ISSN 0128-7680; ESSN: 2231-8526

Maringgal, Bernard and Hashim, Norhashila and MMohamed AminTawakkal, Intan Syafinaz and Mohamed, Mahmud Tengku Muda and Hamzah, Muhammad Hazwan and Abdul Shukor, Nur Indah (2019) The causal agent of anthracnose in papaya fruit and control by three different Malaysian stingless bee honeys, and the chemical profile. Scientia Horticulturae, 257. pp. 1-9. ISSN 0304-4238

Maringgal, Bernard and Hashim, Norhashila and Mohamed Amin Tawakkal, Intan Syafinaz and Tengku Muda Mohamed, Mahmud and Abdul Shukor, Nur Indah (2019) Phytochemical compositions and antioxidant activities of Malaysian stingless bee honey. Pertanika Journal of Science & Technology, 27 (S1). pp. 15-27. ISSN 0128-7680; ESSN: 2231-8526

Masenwat, Noor Azreen (2019) Ultrahigh performance concrete as radiation shielding with mixture of high density mineral. Masters thesis, Universiti Putra Malaysia.

Maspo, Nur-adib and Harun, Aizul Nahar and Goto, Masafumi and Mohd Nawi, Mohd Nasrun and Haron, Nuzul Azam (2019) Development of Internet of Thing (IoT) technology for flood prediction and Early Warning System (EWS). International Journal of Innovative Technology and Exploring Engineering, 8 (4). pp. 219-228. ISSN 2278-3075

Masri, Noratiqah and Mohd Kusin, Faradiella and Nik Daud, Nik Norsyahariati and Che Man, Hasfalina (2019) Strength assessment of mining soil treated with steel slag as liner material for retention pond. Pertanika Journal of Science & Technology, 27 (4). pp. 2305-2315. ISSN 0128-7680; ESSN: 2231-8526

Masuri, Siti Ujila and Hairuddin, Abdul Aziz and Muhssen, Hassan Sadah and Sahari, Barkawi (2019) Computational fluid dynamics investigation of air-gas pre mixing controller mixer designed for CNG-diesel dual-fuel engines. CFD Letters, 11 (6). pp. 47-62. ISSN 2180-1363

Mat Ali, Fatin Najihah and Masuri, Siti Ujila (2019) Nanotechnology: the effect of scaling inhibitors on mineral surface. LAP LAMBERT Academic Publishing. ISBN 6139995922/9786139995929

Mat Fuad, Nurafifah (2019) Pre-concentration of marine microalgae Nannochloropsis sp. For high biomass recover. Masters thesis, Universiti Putra Malaysia.

Mat Johari, Amiruddin (2019) Application of low temperature storage of Mastura (J37) jackfruit bulbs on ice confectionery processing. Masters thesis, Universiti Putra Malaysia.

Mat Lazim, Siti Saripa Rabiah (2019) Non-destructive assessment of the internal quality of watermelon using ultraviolet near-infrared spectroscopy. Masters thesis, Universiti Putra Malaysia.

Mat Nasir, Radiah and Mat Su, Ahmad Suhaizi and Yahya, Azmi and Mat Nawi, Nazmi and Wagiman, Nurul Azimah (2019) Soil compaction effects of rubber -wheel tractors and half -track tractors in rice cultivation. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 262-266).

Mat Nong, Mohd Ali and Md Yusof, Juraina and Sabil, Suzila and Mohd Sidek, Roslina and Hasan, Intan Helina and Osman, Rosiah (2019) Motorcycle image application on MATLAB Simulink and FPGA platform. In: 2019 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), 21-23 Aug. 2019, Putrajaya, Malaysia. (pp. 156-159).

Mat Sharif, Zainon and Syed Abdullah, Syed Nurulakla and Rahim, Mohamad Zulafif and Othman, Mohd Syafiq (2019) Design of the goat/sheep holding cage slaughtering system (cage for animal slaughter): innovation and prospect. International Journal of Advanced Science and Technology, 28 (10). pp. 113-120. ISSN 2005-4238; ESSN: 2207-6360

Matdaud, Zulkifli and Md Zhahir, Md Amzari and Ahmad Pua'at, Ahmad Afifi and Hassan, Aziz and Ahmad, Mohamed Tarmizi (2019) Stabilizing attitude control for mobility of wing in ground (WIG) craft - a review. IOP Conference Series: Materials Science and Engineering, 642 (1). art. no. 012005. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Matsukawa, Yoshiaki and Watanabe, Masayuki and Abdul Wahab, Noor Izzri and Othman, Mohammad Lutf (2019) Voltage Stability Index Calculation by Hybrid State Estimation Based on Multi Objective Optimal Phasor Measurement Unit Placement DUPLICATE. Energies, 12 (14). art. no. 2688. pp. 1-19.

Matsukawa, Yoshiaki and Watanabe, Masayuki and Abdul Wahab, Noor Izzri and Othman, Mohammad Lutfi (2019) Voltage stability index calculation by hybrid state estimation based on multi objective optimal phasor measurement unit placement. Energies, 12 (14). art. no. 2688. pp. 1-19. ISSN 1996-1073

Matsukawa, Yoshiaki and Watanabe, Masayuki and Mitani, Yasunori and Othman, Mohammad Lutfi (2019) Influence of measurement uncertainty propagation in current-channel-selectable multi objective optimal phasor measurement unit placement problem. In: 2019 IEEE PES GTD Grand International Conference and Exposition Asia (GTD Asia), 19-23 Mar. 2019, Bangkok, Thailand. (pp. 314-319).

Matsukawa, Yoshiaki and Watanabe, Masayuki and Mitani, Yasunori and Othman, Mohammad Lutfi (2019) Multi-objective PMU placement optimization considering the placement cost including the current channel allocation and state estimation accuracy. Electrical Engineering in Japan, 207 (2). pp. 20-27. ISSN 1520-6416

Mazaheri, Amin and Mohd Isa, Maryam and Mohd Sidek, Roslina and Yusof, Nor Azah (2019) Enhancing real time heavy metal detection using embedded portable signal processing unit. Journal of Engineering and Applied Sciences, 14 (18). pp. 6650-6658. ISSN 1816-949X; ESSN: 1818-7803

Mazani, Norianti and Salit, Mohd Sapuan and Sanyang, Muhammed Lamin and A., Atiqah and R. A., Ilyas (2019) Design and fabrication of shoe shell from kenaf fibre reinforced unsaturated polymer composites. In: Lignocellulose for Future Bioeeconomy. Elsevier, United States, 315 - 332. ISBN 9780128163542; EISBN: 9780128166055

Mazlan, Ali Ahmad and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira (2019) The effects of different length of pineapple leaf fibre (PALF) on tensile properties of random oriented composites. International Journal of Recent Technology and Engineering, 8 (1 spec. 5). pp. 397-399. ISSN 2277-3878

Mazlan, Nurul Ain and Md. Yunos, Khairul Faezah and Mohd Naim, Mohd Nazli and Samsu Baharuddin, Azhari (2019) Performances of sandwich membrane in reclamation of water from final discharged POME. In: International Conference on Environmental Sustainability and Resource Security (IC-ENSURES 2019), 5-6 Nov. 2019, Kuala Lumpur, Malaysia. (pp. 315-322).

Md Rasli, Ahmad Muslim and Mat Nawi, Nazmi and Ahmad, Desa and Yahya, Azmi (2019) The effect of crop parameters on mechanical properties of oil palm fruitlets. Scientia Horticulturae, 250. pp. 352-358. ISSN 0304-4238

Md Sabiani, Nor Habsah (2019) Pretreatment study of food waste using sonication for enhancement of methane production. Doctoral thesis, Universiti Putra Malaysia.

Md Said, Mohamad Syazarudin and Mohd Tohir, Mohd Zahirasri (2019) Prediction of lithium-ion battery thermal runaway propagation for large scale applications fire hazard quantification. Processes, 7 (10). art. no. 703. pp. 1-22. ISSN 2227-9717

Md Said, Mohamad Syazarudin and Wan Ab. Karim Ghani, Wan Azlina and Tan, Hong Boon and Hussain, Siti Aslina and Ng, Denny Kok Sum (2019) Thermochemical conversion of Napier grass for production of renewable syngas. Processes, 7 (10). art. no. 705. pp. 1-14. ISSN 2227-9717

Md Saleh, Nur Izzati and Wan Ab. Karim Ghani, Wan Azlina and Harun, Mohd Razif and Mustapa Kamal, Siti Mazlina (2019) Optimization of enzymatic hydrolysis for the production of antioxidative peptide from Nannochloropsis gaditana using response surface methodology. Pertanika Journal of Science & Technology, 27 (S1). pp. 41-55. ISSN 0128-7680; ESSN: 2231-8526

Md Shafie, Muhammad Alimin and Abdul Hamid, Mohd Faisal and Mohd Rafie, Azmin Shakrine (2019) Circulation control aircraft design: assessment on the channel-wing lift-thrust performance characteristics. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (1). pp. 143-151. ISSN 2289-7879

Md Shah, Ain Umaira and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad (2019) Sandwich-structured bamboo powder/glass fibre-reinforced epoxy hybrid composites – mechanical performance in static and dynamic evaluations. Journal of Sandwich Structures & Materials, 23 (1). pp. 1-17. ISSN 1099-6362; ESSN: 1530-7972

Md Yusoff, Yuzainee and Noor Hasnan, Noor Zafira and Johari, Nurulnadiah (2019) Cooling load calculation for efficient cold storage of fresh-cut yam bean. International Journal of Recent Technology and Engineering, 8 (4). pp. 6506-6513. ISSN 2277-3878

Md Yusoff, Zainuddin and Nik Daud, Nik Norsyahariati and Nahazanan, Haslinda Nahazanan (2019) Engineering geology for engineers. Universiti Putra Malaysia Press, Serdang, Selangor. ISBN 9789673449101

Md. Yunos, Khairul Faezah and Mazlan, Nurul Ain and Naim, Mohd Nazli and Samsu Baharuddin, Azhari and Hassan, Abdul Rahman (2019) Ultrafiltration of palm oil mill effluent: effects of operational pressure and stirring speed on performance and membranes fouling. Environmental Engineering Research, 24 (2). pp. 263-270. ISSN 1226-1025; ESSN: 2005-968X

Megat Ahmad Azman, Puteri Nurain and Shamsudin, Rosnah and Che Man, Hasfalina and Ya'acob, Mohammad Effendy (2019) Physical properties of matured pepper berries. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 123-125).

Memari, Nogol (2019) Computer-aided diagnosis of diabetic patients based on color fundus images using machine learning techniques. Doctoral thesis, Universiti Putra Malaysia.

Memari, Nogol and Ramli, Abd Rahman and Saripan, M. Iqbal and Mashohor, Syamsiah and Moghbel, Mehrdad (2019) Retinal blood vessel segmentation by using matched filtering and fuzzy C-means clustering with integrated level set method for diabetic retinopathy assessment. Journal of Medical and Biological Engineering, 39. pp. 713-731. ISSN 1609-0985; ESSN: 2199-4757

Mior Zakuan Azmi, Mazidah (2019) Effects of different operating conditions of air fryer and convection oven on the quality of moist chocolate cake. Masters thesis, Universiti Putra Malaysia.

Mkharem, Mufida Ibrahim (2019) Determination of additional access door location for a traditional house in Libya to reduce evacuation time. Doctoral thesis, Universiti Putra Malaysia.

Moey, Lip Kean (2019) Improvement of air change rate through roof design configurations using numerical method. Doctoral thesis, Universiti Putra Malaysia.

Moghaddam, Seyed Amirebrahim Emami (2019) Improvement of algal-alginate bead stability by zeolite molecular sieves 13X and its application in biosorption. Doctoral thesis, Universiti Putra Malaysia.

Moghaddam, Seyed Amirebrahim Emami and Harun, Razif and Mokhtar, Mohd Noriznan and Zakaria, Rabitah (2019) Preliminary study on zeolite 13X as a potential carrier for algal immobilization. Journal of Advanced Research in Materials Science, 53 (1). pp. 1-5. ISSN 2289-7992

Moghrabiah, Mohammed Yasser (2019) A platform for controlling robotic manipulators using cloud computing power. Masters thesis, Universiti Putra Malaysia.

Mohamad, Ahmad Syukri and Mohd Radzi, Mohd Amran and Mailah, Nashiren Farzilah and Othman, Mohammad Lutfi (2019) The effects of number of conducting switches in a cascaded multilevel inverter output. In: 2019 IEEE 10th Control and System Graduate Research Colloquium (ICSGRC 2019), 2-3 Aug. 2019, Grand Blue Wave Hotel, Shah Alam, Selangor. (pp. 26-31).

Mohamad, Mas Haslinda (2019) Opportunistic cognitive radio network with primary user activity model. Doctoral thesis, Universiti Putra Malaysia.

Mohamad, Nur Aqilah and Azis, Norhafiz and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Yunus, Robiah and Yaakub, Zaini (2019) Impact of Fe3O4, CuO and Al2O3 on the AC breakdown voltage of palm oil and coconut oil in the presence of CTAB. Energies, 12 (9). art. no. 1605. pp. 1-14. ISSN 1996-1073

Mohamad, Siti Fatimah and Ungku Zainal Abidin, Ungku Fatimah and Saari, Nazamid and Zakaria, Muta Harah and Ismail, Alyani and Man, Nor Azirawani (2019) Knowledge, attitude and practice towards the implementation of outcome-based education among the academics in Universiti Putra Malaysia. International Journal of Engineering and Advanced Technology, 8 (5C spec.). pp. 1044-1053. ISSN 2249 – 8958

Mohamad Ghazali, Aida Nabila and Shamsudin, Rosnah and Jalil, Muhammad Siddiq Amir (2019) Development of dabai nutcracker. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 230-232).

Mohamad Ghazali, Nashratul Shera and Yusof, Yus Aniza and Mohd Ghazali, Hasanah and Chin, Nyuk Ling and Othman, Siti Hajar and Chang, Lee Sin and Abdul Manaf, Yanty Noorzianna (2019) Effects of conventional storage method on Geniotrigona thoracica stingless bee honey properties. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 115-117).

Mohamad Hamdan, ‪Mohammad Hazim and Siregar, Januar Parlaungan and Salit, Mohd Sapuan and Cionita, Tezara and Zohari, Mohd Hafizi and Mat Rejab, Mohd Ruzaimi and Bachtiar, Dandi and Jaafar, Jamiluddin (2019) Vibration analysis of hybrid reinforced unsaturated polyester composites. In: Unsaturated Polyester Resins: Fundamentals, Design, Fabrications and Applications. Elsevier, Netherlands, 489 - 514. ISBN 9780128161296

Mohamad Mazlan, Azween and A. Talib, Rosnita and Mail, Nor Fitriyanah and Taip, Farah Saleena and Chin, Nyuk Ling and Sulaiman, Rabiha and Shukri, Radhiah and Mohd Nor, Mohd Zuhair (2019) Effects of extrusion variables on corn-mango peel extrudates properties, torque and moisture loss. International Journal of Food Properties, 22 (1). pp. 54-70. ISSN 1094-2912; ESSN: 1532-2386

Mohamad Rasli, Nur Amanina and Saadon, Syamimi (2019) CFD analysis of heat transfer through stirling engine with different regenerators. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (1). pp. 126-134. ISSN 2289-7879

Mohamad Sapiee, Mohd Razali and Abdul Wahit, Mohamad Aizat and Marhaban, Mohammad Hamiruce and Ishak, Asnor Juraiza and Mohd Annuar, Khalil Azha and Miskon, Muhammad Fahmi (2019) Simulation of control for reduced dof lower limb exoskeleton robot using cad design. International Journal of Recent Technology and Engineering, 8 (1 spec. 5). pp. 99-103. ISSN 2277-3878

Mohamamad Sharif, Pshtiwan and Hairuddin, Abdul Aziz and As'arry, Azizan and Md Rezali, Khairil Anas and Mat Noor, Muhamad and Mohamed, Norhafana and Mossa, Muntasser Abdulabbas and Shareef, Sharaf (2019) International regulation of vehicle emissions control rules and its influence on academic engine development experimental study and vehicle manufacturing. IOP Conference Series: Materials Science and Engineering, 469. art. no. 012070. pp. 1-14. ISSN 1757-8981; ESSN: 1757-899X

Mohamamad Sharif, Pshtiwan and Hairuddin, Abdul Aziz and As’arry, Azizan and Md Rezali, Khairil Anas and Mat Noor, Muhamad and Mohamed, Norhafana and Shareef, S. M. (2019) Nano gas bubbles dissolve in gasoline fuel and its influence on engine combustion performance. IOP Conference Series: Materials Science and Engineering, 469. art. no. 012062. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Mohamed Ariff, Azmah Hanim and Brabazon, Dermot and Hashmi, M. S. J. (2019) Cracks, microcracks, and fracture toughness of polymer composites: formation, testing method, nondestructive detection, and modifications. In: Failure Analysis in Biocomposites, Fibre- Reinforced Composites and Hybrid Composites. Woodhead Publishing series in composites science and engineering . Woodhead Publishing, Duxford, United Kingdom, 157 - 180. ISBN 9780081022931; EISBN: 9780081023013

Mohamed Ariff, Azmah Hanim and Hashmi, M. S. J. and Brabazon, Dermot (2019) Voids in biocomposites and their hybrids: origin, effect on moisture absorption, and optical analysis. In: Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites. Woodhead Publishing Series in Composites Science and Engineering . Woodhead Publishing, United Kingdom, 193 - 212. ISBN 9780081022924

Mohamed El-Zeadani and M. R., Raizal Saifulnaz and Y. H., Mugahed Amran and Hejazi, F. and Jaafar, M. S. and Alyousef, Rayed and Alabduljabbar, Hisham (2019) Flexural strength of FRP plated RC beams using a partial-interaction displacement-based approach. Structures, 22. pp. 405-420. ISSN 2352-0124

Mohamed Latiff, Ahmad Syahmi (2019) Mechanical and thermal properties of surface treated sugar palm fibre-reinforced epoxy biocomposites. Masters thesis, Universiti Putra Malaysia.

Mohamed Noor, Norramlee and Aris, Ishak and Arof, Saharul and Ismail, Ahmad Kamal and K. A., Shamsudin and M., Norhisam (2019) Analytical study of a cylindrical linear electromagnetic pulsing motor for electric vehicles. In: Progress in Engineering Technology: Automotive, Energy Generation, Quality Control and Efficiency. Advanced Structured Materials. Springer, Switzerland, 67 - 82. ISBN 9783030285050

Mohamed Sharif, Noor Fadzilah and Ab Kadir, Mohd Zainal Abidin and Shafie, Suhaidi and Abdul Rashid, Suraya and Wan Hasan, Wan Zuha and Shaban, Suraya (2019) Charge transport and electron recombination suppression in dye-sensitized solar cells using graphene quantum dots. Results in Physics, 13. art. no. 102171. pp. 1-7. ISSN 2211-3797

Mohamed Yaghoobi, Yousef Jassim Ismail Abdulla (2019) Avian-inspired feature-based relative positioning strategy for formation control of multiple unmanned aerial vehicles. Masters thesis, Universiti Putra Malaysia.

Mohammad Ata, Karimeh Ibrahim (2019) Embedded system for indoor guidance parking with Dijkstra’s algorithm and ant colony optimization. Masters thesis, Universiti Putra Malaysia.

Mohammad Saleh, Syahin (2019) Utilization and optimization of industrial bottom ash for palm oil mill effluent decolourization. Masters thesis, Universiti Putra Malaysia.

Mohammed, Aqeel Abdulazeez (2019) An intelligent path planning for autonomous mobile robot using modified A* algorithm with hybrid particle swarm optimization-artificial neural network (Not for loan). Doctoral thesis, Universiti Putra Malaysia.

Mohammed, Hala J. and Flayyih, Wameedh Nazar and Rokhani, Fakhrul Zaman (2019) Tolerating permanent faults in the input port of the network on chip router. Journal of Low Power Electronics and Applications, 9 (1). art. no. 11. pp. 1-18. ISSN 2079-9268

Mohammed, Husam Abduldaem and Abdul Rashid, Suraya and Abu Bakar, Muhammad Hafiz and Ahmad Anas, Siti Barirah and Mahdi, Mohd Adzir and Yaacob, Mohd Hanif (2019) Fabrication and characterizations of a novel etched-tapered single mode optical fiber ammonia sensors integrating PANI/GNF nanocomposite. Sensors and Actuators B: Chemical, 287. pp. 71-77. ISSN 0925-4005; ESSN:

Mohammed, Ibrahim and Abu Talib, Abd. Rahim (2019) Burn-through responses of aero-engine nacelle using fiber metal composites by ISO2685 propane-air burner. International Journal of Recent Technology and Engineering, 8 (4). pp. 9235-9238. ISSN 2277-3878

Mohammed Abdulkarem and Samsudin, Khairulmizam and Rokhani, Fakhrul Zaman and A. Rasid, Mohd Fadlee (2019) Wireless sensor network for structural health monitoring: a contemporary review of technologies, challenges, and future direction. Structural Health Monitoring, 19 (3). pp. 693-735. ISSN 1475-9217; ESSN: 1741-3168

Mohammed Ahmed Qaid, Alrifaey Moath (2019) Development of reliability-centered maintenance model using linguistic failure mode and effect analysis. Doctoral thesis, Universiti Putra Malaysia.

Mohammed Ahmed Qaid, Alrifaey Moath and Hong, Tang Sai and Supeni, Eris Elianddy and As’arry, Azizan and Ang, Chun Kit (2019) Identification and prioritization of risk factors in electrical generator based on hybrid FMEA framework. Energies, 12 (4). pp. 1-22. ISSN 1996-1073

Mohammed Al-wani, Mohanad and Sali, Aduwati and Noordin, Nor Kamariah and Hashim, Shaiful Jahari and Chee, Yen Leow and Krikidis, Ioannis (2019) Robust beamforming and user clustering for guaranteed fairness in downlink NOMA with partial feedback. IEEE Access, 7. 121599 -121611. ISSN 2169-3536

Mohammed Khurshid, Zmnako and Hizam, Hashim and Gomes, Chandima (2019) Lightning-induced transient effects in a hybrid PV–wind system and mitigation strategies. Electric Power Systems Research, 174. art. no. 105882. pp. 1-13. ISSN 0378-7796

Mohd Ariffin, Mohd Khairol Anuar and Rezanoori, Alireza and Zulkefli, Zamir Aimaduddin and Abdul Jalil, Nawal Aswan and Delgoshaei, Aidin (2019) A new method to improve passenger vehicle safety using intelligent functions in active suspension system. Engineering Solid Mechanics, 7 (4). pp. 313-330. ISSN 2291-8744; ESSN: 2291-8752

Mohd Ariffin, Mohd Ruzaimi and Shafie, Suhaidi and Wan Hasan, Wan Zuha and Azis, Norhafiz and Ya'acob, Mohammad Effendy and Supeni, Eris Elianddy (2019) Microcontroller based DC energy logger for off-grid PV system application. In: 2019 4th IEEE International Circuit and System Symposium (ICSyS), 18-19 Sept. 2019, Hotel Istana, Kuala Lumpur, Malaysia. (pp. 1-5).

Mohd Basri, Mohd Salahuddin and Mohd Nor, Mohd Zuhair and Shamsudin, Rosnah (2019) Mechanical analysis of a wedge device in sawing technology. Pertanika Journal of Science & Technology, 27 (S1). pp. 197-209. ISSN 0128-7680; ESSN: 2231-8526

Mohd Daud, Mohd Nazrin (2019) Rapid stabilisation of hemic peat using melamine urea formaldehyde polymer resin by soil column method. Doctoral thesis, Universiti Putra Malaysia.

Mohd Dom, Zanariah and Mohd Halimi, Nur Zaleqha and Mujianto, Lisnurjannah (2019) Utilization of banana peel flour as fibre ingredient in the waffle cones. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 141-144).

Mohd Hassan, Siti Lailatul (2019) Low power fast fourier transform and combiner of multi carrier-code division multiple access receiver system for wireless sensor networks. Doctoral thesis, Universiti Putra Malaysia.

Mohd Hassan, Siti Lailatul and Sulaiman, Nasri and Abdul Halim, Ili Shairah and Ab Rahim, A'zraa Ahfzan and Abdullah, Noor Ezan (2019) Pipelined fast Fourier transform (FFT) processor power optimization. In: 2019 IEEE 7th Conference on Systems, Process and Control (ICSPC 2019), 13-14 Dec. 2019, Melaka, Malaysia. (pp. 127-130).

Mohd Hassan, Siti Lailatul and Sulaiman, Nasri and Saparon, Azilah and Mohd Yussoff, Yusnani and Jaafar, Haslina (2019) Low power multicarrier- code division multiple access receiver on field programmable gate array. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1 spec. 6). pp. 318-323. ISSN 2278-3091

Mohd Isa, Maryam and Sadir, Hayder Abdulhasan and Ismail, Alyani and Mohd Sidek, Roslina (2019) Multi-band notched patch antenna for 5G applications. In: 2019 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE), 25-27 Nov. 2019, Hatten Hotel, Melaka, Malaysia. .

Mohd Ismail, Izyan Khairani (2019) Physical, mechanical and thermal properties of tilapia scale hydroxyapatite-filled high density polyethylene composites. Masters thesis, Universiti Putra Malaysia.

Mohd Ismail, Izyan Khairani and Jaafar, Che Nor Aiza and Zainol, Ismail and Mohamed Yusoff, Mohd Zuhri (2019) Preparation and characterization of hydroxyapatite from black tilapia fish scales using spray-drying method. Malaysian Journal of Microscopy, 15. pp. 155-163. ISSN 1823-7010; ESSN: 2600-7444

Mohd Jaih, Abdul Afiq and Abdul Rahman, Russly and Abdull Razis, Ahmad Faizal and Ariffin, A. A. and Al-Awaadh, A. and Suleiman, N. (2019) Fatty acid, triacylglycerol composition and antioxidant properties of date seed oil. International Food Research Journal, 26 (2). pp. 517-527. ISSN 1985-4668; ESSN: 2231-7546

Mohd Jais, Nurain and Mohd Basri, Mohd Salahuddin (2019) Effect of oat to flour ratio on stickiness of the cookie dough. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 107-110).

Mohd Mustafah, Anas (2019) Social innovation for community building through technology simplification. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 302-305).

Mohd Najib, Mohamad Aznan and Mohamed Ariff, Azmah Hanim and Mohd Tahir, Suraya and As'arry, Azizan and Mazlan, Norkhairunnisa (2019) Microstructural, physical and mechanical analysis of RHA pore modified porous alumina with aluminum as reinforcement. ASEAN Engineering Journal, 9 (1). pp. 29-43. ISSN 2586-9159

Mohd Nasir, Mohamad Nasrun and Sabo, Aliyu and Abdul Wahab, Noor Izzri (2019) A review on synchrophasor technology for power system monitoring. In: 2019 17th IEEE Student Conference on Research and Development (SCOReD), 15-17 Oct. 2019, Universiti Teknologi PETRONAS, Malaysia. (pp. 58-62).

Mohd Nasir, Muhammad Adib (2019) Climate-smart decision support system for assessing water demand patterns under future climate change for Kerian rice irrigation scheme, Malaysia. Masters thesis, Universiti Putra Malaysia.

Mohd Nasir, Nur Athirah and Saadon, Syamimi (2019) Modelling and thermal analysis of organic rankine cycle with superheater and preheater. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (2). pp. 142-149. ISSN 2289-7879

Mohd Nawi, Zawati and Ab Kadir, Mohd Zainal Abidin and Azis, Norhafiz and Wan Ahmad, Wan Fatinhamamah and Mohamed Rawi, Iryani and Ungku Amirulddin Al Amin, Ungku Anisa and Nordin, Farah Hani (2019) Comparative analysis of ACSR and ACCC conductors on corona effect for lightning surge studies. In: 11th Asia-Pacific International Conference on Lightning (APL 2019), 12-14 June 2019, Hong Kong, China. .

Mohd Nazri, Muslimah Solehah and Mohamed Amin Tawakkal, Intan Syafinaz and Khairuddin, Nozieana and A. Talib, Rosnita and Othman, Siti Hajar (2019) Characterization of jackfruit straw-based films: effect of starch and plasticizer contents. Pertanika Journal of Science & Technology, 27 (S1). pp. 1-14. ISSN 0128-7680; ESSN: 2231-8526

Mohd Noh, Zarina (2019) Near infrared palm image acquisition and two-finger valley point-based image extraction for palm vascular pattern detection. Doctoral thesis, Universiti Putra Malaysia.

Mohd Noor, Shahera (2019) Fabrication of BC/MWCNT biocomposite for gas sensing application (Not for loan). Masters thesis, Universiti Putra Malaysia.

Mohd Nor, Nor Aznan (2019) Relationship of chip load and spindle speed on cutting force and surface integrity for high-speed dry end-milling Hastelloy X material. Doctoral thesis, Universiti Putra Malaysia.

Mohd Nor Munawar, Nur Sofeana Zulaika and Ishak, Mohamad Ridzwan and Shahroze Ali, Rao Muhammad and Jawaid, Mohammad and Mohamed Yusoff, Mohd Zuhri (2019) An investigation of the morphological and tensile properties of vacuum resin impregnated sugar palm fibers with various thermosetting resins. BioResources, 14 (3). pp. 5212-5223. ISSN 1930-2126

Mohd Omar, Jusrianti and Mohd Nor, Mohd Zuhair (2019) Clarification of guava juice through membrane-based process. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 94-96).

Mohd Radzi, Mohd Amran and Abd. Rahim, Nasrudin and Hang, Seng Che and Ohgaki, Hideaki and Farzaneh, Hooman and Shung, Wallace Hui Wong and Lai, Chean Hung (2019) Optimal solar powered system for long houses in Sarawak by using homer tool. ASEAN Engineering Journal, 9 (1). pp. 1-14. ISSN 2586-9159

Mohd Radzi, Mohd Hafiezal and Abdan, Khalina and Zainal Abidin, Zurina and Md Deros, Mohd Azaman and Zin, Mohd Hanafee (2019) Thermal and flammability characteristics of blended jatropha bio-epoxy as matrix in carbon fiber–reinforced polymer. Journal of Composites Science, 3 (1). art. no. 6. pp. 1-13. ISSN 2504-477X

Mohd Rafie, Azmin Shakrine and Magaidi, Amer M. and Marzuki, Omar Faruqi (2019) Aerodynamic performance of biomimicry snake-shaped airfoil. International Journal of Engineering and Advanced Technology, 9 (2). pp. 3319-3323. ISSN 2249-8958

Mohd Roslim, Muhammad Huzaifah and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan (2019) Comparative study of physical, mechanical, and thermal properties of sugar palm fiber (Arenga pinnata) reinforced vinyl ester composites obtained from different geographical locations. BioResources, 14 (1). pp. 619-637. ISSN 1930-2126

Mohd Roslim, Muhammad Huzaifah and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan (2019) Effect of fibre loading on the physical, mechanical and thermal properties of sugar palm fibre reinforced vinyl ester composites. Fibers and Polymers, 20 (5). pp. 1077-1084. ISSN 1229-9197; ESSN: 1875-0052

Mohd Sidek, Roslina and Lee, Chu Liang and Sulaiman, Nasri and Rokhani, Fakhrul Zaman (2019) A low quiescent current low dropout voltage regulator with self-compensation. Bulletin of Electrical Engineering and Informatics, 8 (1). pp. 65-73. ISSN 2302-9285; ESSN: 2089-3191

Mohd Taha, Mastura and Salit, Mohd Sapuan and Muhammad, Noryani (2019) Material selection of natural fibers for composite automotive component using analytic hierarchy process/analytic network process in concurrent engineering approach. Key Engineering Materials, 801. pp. 53-58. ISSN 1013-9826; ESSN: 1662-9795

Mohd Tamyis, Najihah (2019) Characterization of carbon nanotube epoxy composites and carbon nanotubes/laminated carbon fibre epoxy composites. Doctoral thesis, Universiti Putra Malaysia.

Mohd Thani, Nurfatimah and Mustapa Kamal, Siti Mazlina and Taip, Farah Saleena and Sulaiman, Alifdalino and Omar, Rozita (2019) Effect of enzyme concentrations on total reducing sugar from leftover croissants and doughnuts via enzymatic hydrolysis. Food Research, 3 (4). pp. 313-316. ISSN 2550-2166

Mohd Thani, Nurfatimah and Mustapa Kamal, Siti Mazlina and Taip, Farah Saleena and Sulaiman, Alifdalino and Omar, Rozita (2019) Effect of sub-critical water hydrolysis on sugar recovery from bakery leftovers. Food and Bioproducts Processing, 117. pp. 105-112. ISSN 0960-3085

Mohd Tohir, Mohd Zahirasri and Akhyani, Abdul Haqeem (2019) Tenability analysis of office rooms using probabilistic fire load energy density data. Journal of Advanced Research in Fluid Mechanics and Thermal Science, 56 (2). pp. 257-266. ISSN 2289-7879

Mohd Tohir, Mohd Zahirasri and Spearpoint, Michael (2019) Probability of fire spread between vehicles in car parking buildings. In: Proceedings of the 1st Global Civil Engineering Conference. Lecture Notes in Civil Engineering, 9 . Springer, Singapore, 1357 - 1366. ISBN 9789811080159; EISBN: 9789811080166

Mohd Yassin, Mohd Nazrin (2019) Software-defined instrumentation for microwave network analysis measurement system incorporating virtual calibration technique. Doctoral thesis, Universiti Putra Malaysia.

Mohd Yunus, Mohd Amirul Syafiq and Hussain, Siti Aslina and Sipaun, Susan Maria (2019) Industrial radiotracer application in flow rate measurement and flowmeter calibration using ⁹⁹mTc and ¹⁹⁸Au nanoparticles radioisotope. Applied Radiation and Isotopes, 143. pp. 24-28. ISSN 0969-8043; ESSN: 1872-9800

Mohd Yusof, Mohd Johari and Shafri, Helmi and Abu Kasim, Junainah (2019) Urban green space degradation: an experience of Kuala Lumpur city. Environmental Management and Sustainable Development, 8 (1). pp. 27-41. ISSN 2164-7682

Mohd Yusof, Siti Jamilah Hanim and Roslan, Ahmad Muhaimin and Ibrahim, Khairul Nadiah and Syed Abdullah, Sharifah Soplah and Zakaria @ Mamat, Mohd Rafein and Hassan, Mohd Ali and Shirai, Yoshihito (2019) Life cycle assessment for bioethanol production from oil palm frond juice in an oil palm based biorefinery. Sustainability, 11 (24). art. no. 6928. pp. 1-14. ISSN 2071-1050

Mohd Yusoff, Norita (2019) Dual-wavelength random fiber laser incorporating micro-air cavity. Masters thesis, Universiti Putra Malaysia.

Mohd Zahiruddin, Siti Mariam and Othman, Siti Hajar and Mohamed Amin Tawakkal, Intan Syafinaz and A. Talib, Rosnita (2019) Mechanical and thermal properties of tapioca starch films plasticized with glycerol and sorbitol. Food Research, 3 (2). pp. 157-163. ISSN 2550-2166

Mohd Zobir, Syazwan Afif and Abdul Rashid, Suraya and Tan, Tong Ling (2019) Recent development on the synthesis techniques and properties of graphene derivatives. In: Synthesis, Technology and Applications of Carbon Nanomaterials. Micro & Nano Technologies . Elsevier, Cambridge, Canada, 1 - 363. ISBN 9780128157572

Mohd Zulkeple, Muhammad Fitri and Abu Talib, Abd Rahim and Gires, Ezanee and Hameed Sultan, Mohamed Thariq (2019) Microencapsulation and thickness effect on the occurrence of hysteresis of thermochromic liquid crystal calibration. Journal of Aeronautics, Astronautics and Aviation, 51 (2). pp. 171-182. ISSN 1990-7710

Mohd Zulkifle, Muhammad Fitri and Abu Talib, Abd. Rahim and Gires, Ezanee and Hameed Sultan, Mohamed Thariq (2019) Investigation on the effect of sample preparation on the performance of thermochromic liquid crystal. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (2). pp. 150-164. ISSN 2289-7879

Mokhtar, Zaty Aktar (2019) Modelling tsunami bore-induced pressures on various seawall types. Doctoral thesis, Universiti Putra Malaysia.

Mokhtar, Zaty Aktar and Mohammed, Thamer Ahmad and Yusuf, Badronnisa and Lau, Tze Liang (2019) Experimental investigation of tsunami bore impact pressure on a perforated seawall. Applied Ocean Research, 84. pp. 291-301. ISSN 0141-1187; ESSN: 1879-1549

Mokhtar, Zaty Aktar and Yusuf, Badronnisa and Mohammad Ali, Thamer Ahmad and Hamzah, Saiful Bahri (2019) Experimental study of tsunami bore induced forces on vertical seawall. Pertanika Journal of Science & Technology, 27 (2). pp. 673-684. ISSN 0128-7680; ESSN: 2231-8526

Moriken, Camara and Jamil, Nor Rohaizah and Abdullah, Ahamd Fikri (2019) Impact of land uses on water quality in Malaysia: a review. Ecological Processes, 8 (1). pp. 1-10. ISSN 2192-1709

Mossa, Muntasser Abdulabbas (2019) Performance of homogeneous charge compression ignition engine fuelled with used cooking oil-based biodiesel. Masters thesis, Universiti Putra Malaysia.

Mossa, Muntasser Abdulabbas and Hairuddin, Abdul Aziz and Abdul Aziz, Nuraini and Jamal, Zulkiple and Muhamad Tobib, Hasyuzariza (2019) Effects of hot exhaust gas recirculation (EGR) on the emission and performance of a single-cylinder diesel engine. International Journal of Automotive and Mechanical Engineering, 16 (2). pp. 6660-6674. ISSN 2229-8649; ESSN: 2180-1606

Motlagh, Shiva Rezaei and Harun, Razif and Awang Biak, Dayang Radiah and Hussain, Siti Aslina and Wilfreda, Cecilia Devi and Krishnan, Sooridarsan (2019) Screening of long chain imidazolium base ionic liquids for EPA and DHA extraction from microalgae using COSMO-RS model. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (1). pp. 23-29. ISSN 2289-7879

Mousa, Ahmed Hassan and Nahazanan, Haslinda and Md Yusoff, Zainuddin and Kim Huat, Bujang and Mustafa, Muskhazli (2019) Properties of biomineralization process in various types of soil and their limitations. International Journal of Engineering and Advanced Technology, 9 (1). pp. 4261-4268. ISSN 2249–8958

Mousa Al-Ibraheemi, Zahraa A. and Mahdi, Ali Basim and Taip, Farah Saleena and Anuar, Mohd Shamsul (2019) Effect of the applied pressure on the essential characteristics of sodium starch glycolate tablets. Journal of Physics: Conference Series, 1279. pp. 1-11. ISSN 1742-6588; ESSN: 1742-6596

Mudhafar, Mustafa and Zainol, Ismail and Desa, Shakinaz and Jaafar, Che Nor Aziza (2019) Mini-review of Phytochemistry for Polyalithia longiflia. Eurasian Journal of Analytical Chemistry, 14 (2). pp. 119-147. ISSN 1306-3057

Muhadi, Nur 'Atirah and Mohd Kassim, Muhamad Saufi and Abdullah, Ahmad Fikri (2019) Improvement of Digital Elevation Model (DEM) using data fusion technique for oil palm replanting phase. International Journal of Image and Data Fusion, 10 (3). pp. 232-243. ISSN 1947-9832; ESSN: 1947-9824

Muhamad Tobib, Hasyuzariza (2019) Experimental investigation on performance of homogeneous charge compression ignition engine fueled with palm oil based biodiesel. Masters thesis, Universiti Putra Malaysia.

Muhammad, Noryani (2019) Regression analysis framework for material selection of natural fibre-reinforced polymer composites. Doctoral thesis, Universiti Putra Malaysia.

Muhammad, Noryani and Salit, Mohd Sapuan and Muhammad Taha, Mastura and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams (2019) Material selection of a natural fibre reinforced polymer composites using an analytical approach. Journal of Renewable Materials, 7 (11). pp. 1165-1179. ISSN 2164-6325; ESSN: 2164-6341

Muhammad Amir, Siti Madiha (2019) Characterization of low velocity impact damage of gamma-irradiated kevlar/oil palm empty fruit bunch hybrid composites. Doctoral thesis, Universiti Putra Malaysia.

Muhammad Amir, Siti Madiha and Hameed Sultan, Mohamad Thariq and Jawaid, Mohammad and Md Shah, Ain Umaira and Ariffin, Ahmad Hamdan and Mohd, Shukri and Mohd Salleh, Khairul Anwar (2019) Water absorption associated with gamma irradiation on kevlar/oil palm EFB hybrid composites. International Journal of Recent Technology and Engineering, 8 (1s5). pp. 444-447. ISSN 2277-3878

Muhammad Amir, Siti Madiha and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Safri, Syafiqah Nur Azrie and Md Shah, Ain Umaira and Yusof, Mohd Ridzuan and Arockiam, Naveen Jesu and Mohd, Shukri and Salleh, Khairul A. M. and Saba, Naheed (2019) Effects of layering sequence and gamma radiation on mechanical properties and morphology of Kevlar/oil palm EFB/epoxy hybrid composites. Journal of Materials Research and Technology, 8 (6). pp. 5362-5373. ISSN 2238-7854

Muhd Julkapli, Halimatul Saadiah and Salit, Mohd Sapuan and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and Ilyas, R. A. (2019) Effect of sago starch and plasticizer contents on thermoplastic sago films: mechanical and repeated soaking and drying test. Polimery, 64 (6). pp. 422-431. ISSN 0032-2725

Mukhtar, Isma'ila and Leman, Zulkiflle and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams (2019) Sugar palm fiber– reinforced polymer hybrid composites: an overview. In: Sugar Palm Biofibers, Biopolymers, and Biocomposites. CRC Press, Boca Raton, 145 - 163. ISBN 9781498753029; EISBN: 9780429443923

Murthy, Avinash Srikanta and Azis, Norhafiz and Mohd Yousof, Mohd Fairouz and Jasni, Jasronita and Othman, Mohammad Lutfi and Das, Bhaba Priyo and Talib, Mohd Aizam (2019) Investigation on the resonant oscillations in an 11kV distribution transformer under standard and chopped lightning impulse overvoltages with different configurations of shield placements. Energies, 12 (8). pp. 1-24. ISSN 1996-1073

Murthy, Avinash Srikanta and Azis, Norhafiz and Mohd Yousof, Mohd Fairouz and Jasni, Jasronita and Othman, Mohammad Lutfi and Talib, Mohd Aizam and Das, Bhaba Priyo (2019) Investigation on the resonant oscillations in an 11 kV distribution transformer under standard and chopped lightning impulse overvoltages with different shield placement configurations. Energies, 12 (8). art. no. 1466. pp. 1-24. ISSN 1996-1073

Musa, Mohammed Ali and Idrus, Syazwani and Che Man, Hasfalina and Nik Daud, Nik Norsyahariati (2019) Performance comparison of conventional and modified Upflow Anaerobic Sludge Blanket (UASB) reactors treating high-strength cattle slaughterhouse wastewater. Water, 11 (4). pp. 1-18. ISSN 2073-4441

Musa, Surajo Alhaji (2019) Digital video broadcasting satellite-based passive forward scatter radar for drone detection based on micro Doppler analysis. Doctoral thesis, Universiti Putra Malaysia.

Musab, Reem and As’arry, Azizan and Md. Rezali, Khairil Anas and Abdul Jalil, Nawal Aswan and Raja Ahmad, Raja Mohd Kamil and Md Zain, Mohd Zarhamdy (2019) Tremor quantification and its measurements using shimmer. Journal of Physics: Conference Series, 1262. pp. 1-7. ISSN 1742-6588; ESSN: 1742-6596

Mustafa, Iswaibah and Chin, Nyuk Ling and Fakurazi, Sharida and Palanisamy, Arulselvan (2019) Comparison of phytochemicals, antioxidant and anti-inflammatory properties of sun-, oven- and freeze-dried ginger extracts. Foods, 8 (10). art. no. 456. pp. 1-11. ISSN 2304-8158

Mustafa, Mayada Salih Abdalla (2019) A proactive energy awareness traffic routing for wireless sensor networks against energy sink-holes. Doctoral thesis, Universiti Putra Malaysia.

Mustafa, Muhammad Farhan and Mohtar, Mohd Nazim and Shafie, Suhaidi and Azis, Norhafiz and Wan Hassan, Wan Zuha (2019) Hybrid systems for robotic navigations. Journal of Advanced Research in Dynamical and Control Systems, 11 (9). pp. 167-173. ISSN 1943-023X

Mustafa, Muhammad Farhan and Wan Hasan, Wan Zuha and Hassan, Muhammad Syazwan and Ab Kadir, Mohd Zainal Abidin and Azis, Norhafiz and Mohd Yusoff, Mohd Zulfahmi (2019) Structural design of Cartesian vacuum system for loose fruit collector (LFC) machine. In: 2019 4th IEEE International Circuit and System Symposium (ICSyS), 18-19 Sept. 2019, Hotel Istana, Kuala Lumpur, Malaysia. (pp. 1-4).

Mustafa, Muhammad Norhaffis and Shafie, Suhaidi and Wahid, Mohd Haniff and Sulaiman, Yusran (2019) Light scattering effect of polyvinyl-alcohol/titanium dioxide nanofibers in the dye-sensitized solar cell. Scientific Reports, 9. art. no. 14952. pp. 1-8. ISSN 2045-2322

Mustafa, Muhammad Norhaffis and Shafie, Suhaidi and Wahid, Mohd Haniff and Sulaiman, Yusran (2019) Optimization of power conversion efficiency of polyvinyl-alcohol/titanium dioxide as light scattering layer in DSSC using response surface methodology/central composite design. Results in Physics, 15. art. no. 102559. pp. 1-9. ISSN 2211-3797

Mustafa, Muhammad Norhaffis and Shafie, Suhaidi and Wahid, Mohd Haniff and Sulaiman, Yusran (2019) Optimization of power conversion efficiency of polyvinyl-alcohol/titanium dioxide compact layer using response surface methodology/central composite design. Solar Energy, 183. pp. 689-696. ISSN 0038-092X; ESSN: 1471-1257

Mustafa, Nuzaimah and Salit, Mohd Sapuan and Razali, Nadlene and Jawaid, Mohammad (2019) Microstructure and mechanical properties of unsaturated polyester composites filled with waste rubber glove crumbs. Fibers and Polymers, 20 (6). pp. 1290-1300. ISSN 1229-9197; ESSN: 1875-0052

Mustafa Albakri, Zulfadhli and Mohd Kassim, Muhamad Saufi and Abdullah, Ahmad Fikri and Harith, Hazreen Haizi (2019) Analysis of oil palm leaf phyllotaxis towards development of models to determine the fresh fruit bunch (FFB) maturity stages, yield and site-specific harvesting. Pertanika Journal of Science & Technology, 27 (2). pp. 659-672. ISSN 0128-7680; ESSN: 2231-8526

Mustapha, Faizal and Mohammed, Mohammed Idris and Sulaeman, Erwin (2019) Adopting dynamic transient response analysis for sensors positioning to monitor cable stayed bridge. International Journal of Recent Technology and Engineering, 7 (6S). pp. 54-60. ISSN 2277-3878

Mustapha Kamil, Yasmin and Al-Rekabi, Sura Hmoud and Mohammed, Husam Abduldaem and Abu Bakar, Muhammad Hafiz and Kanagesan, Samikannu and Yap, Wing Fen and Mahdi, Mohd Adzir (2019) Di-iron trioxide hydrate-multi-walled carbon nanotube nanocomposite for arsenic detection using surface plasmon resonance technique. IEEE Photonics Journal, 11 (4). pp. 1-10. ISSN 1943-0655

Mustapha Kamil, Yasmin and Al-Rekabi, Sura Hmoud and Yaacob, Mohd Hanif and Syahir, Amir and Hui, Yee Chee and Mahdi, Mohd Adzir and Abu Bakar, Muhammad Hafiz (2019) Detection of dengue using PAMAM dendrimer integrated tapered optical fiber sensor. Scientific Reports, 9. art. no. 13483. pp. 1-10. ISSN 2045-2322

Mutafi, Ayad and Yidris, Noorfaizal and Loughlan, Joseph and Zahari, Rizal and Ishak, Mohamad Ridzwan (2019) Investigation into the distribution of residual stresses in pressed-braked thin-walled steel lipped channel sections using the 3D-FEM technique. Thin-Walled Structures, 135 (2). pp. 437-445. ISSN 0263-8231

Muthukumar, Chandrasekar (2019) Mechanical properties of fibre metal laminates reinforced with carbon, flax and sugar palm fibre-based composites. Doctoral thesis, Universiti Putra Malaysia.

Muzaiyin, Nuramanina and Hamzah, Muhammad Hazwan and Che Man, Hasfalina (2019) Ultrasonic pretreatment prior to Soxhlet extraction for essential oil from basil leaves (Ocimum basilicum L.). In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 156-160).

N. A., Maisara Misman and Rushdan, Ahmad Ilyas and Salit, Mohd Sapuan and Mohd Roslim, Muhammad Huzaifah and Norizan, Mohd Nurazzi and Al-Edrus, Syeed Saifulazry Osman (2019) Effect of fibre length and sea water treatment on mechanical properties of sugar palm fibre reinforced unsaturated polyester composites. International Journal of Recent Technology and Engineering, 8 (2 spec. 4). pp. 510-514. ISSN 2277-3878

Nadzri, Nur Zulaikhah and Marhaban, Mohammad Hamiruce and Ahmad, Siti Anom and Ishak, Asnor Juraiza and Mohd Zin, Zalhan (2019) Improved salient object detection via boundary components affinity. Pertanika Journal of Science & Technology, 27 (4). pp. 1735-1758. ISSN 0128-7680; ESSN: 2231-8526

Nahazanan, Haslinda and Abdeldjouad, Lokmane and Kim Huat, Bujang and Asadi, Afshin and Ball, R. J. (2019) Application of alkali-activated palm oil fuel ash reinforced with glass fibers in soil stabilization. Soils and Foundations, 59 (5). pp. 1552-1561. ISSN 0038-0806

Nahazanan, Haslinda and Rosley, Ili Syazwani and Md Yusoff, Zainuddin (2019) Shear behavior of crushed mudstone and claystone under macrostructural and microstructural approaches. Journal of Testing and Evaluation, 49 (3). pp. 2017-2027. ISSN 0090-3973

Naji, Mohammed Isam (2019) Pre-frontal cortex stimulation by EEG-neurofeedback on food intake behavior in obesity and overweight cases. Masters thesis, Universiti Putra Malaysia.

Najih, Abdulmawla and Syed Mohamed, Syed Abdul Rahman Al-Haddad and Ramli, Abdul Rahman and Hashim, Shaiful Jahari and Albannai, Nabila (2019) Matching fingerprint images for biometric authentication using convolutional neural networks. Pertanika Journal of Science & Technology, 27 (4). pp. 1723-1733. ISSN 0128-7680; ESSN: 2231-8526

Nasiri, Hajar and Mohd Yusof, Mohd Johari and Ali, T. A. M. and Hussein, Mohd Kher (2019) District flood vulnerability index: urban decision-making tool. International Journal of Environmental Science and Technology, 16 (5). pp. 2249-2258. ISSN 1735-2630

Nauman, Saima (2019) Potential impacts of climate change on water resources of Haro River Watershed in Pakistan. Masters thesis, Universiti Putra Malaysia.

Nauman, Saima and Zulkafli, Zed Diyana and Ghazali, Abdul Halim and Yusuf, Badronnisa (2019) Impact assessment of future climate change on streamflows upstream of Khanpur Dam, Pakistan using soil and water assessment tool. Water, 11 (5). art. no. 1090. pp. 1-18. ISSN 2073-4441

Naveen, Jesuarockiam and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan (2019) Enhanced thermal and dynamic mechanical properties of synthetic/natural hybrid composites with graphene nanoplateletes. Polymers, 11 (7). art. no. 1085. pp. 1-18. ISSN 2073-4360

Naveen, Jesuarockiam and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan (2019) Improved mechanical and moisture-resistant properties of woven hybrid epoxy composites by graphene nanoplatelets (GNP). Materials, 12 (8). art. no. 1249. pp. 1-18. ISSN 1996-1944

Nazir, Muhammad Anwer and Wan Hasan, Wan Zuha and Ab Kadir, Mohd Zainal Abidin and Sulaiman, Nasri (2019) Portable hybrid power storage system. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 27-29 Aug. 2019, Kuala Lumpur, Malaysia. .

Nfawa, Sadeq Rashid and Abu Talib, Abd. Rahim and Masuri, Siti Ujila and Basri, Adi Azriff and Hasini, Hasril (2019) Heat transfer enhancement in a corrugated-trapezoidal channel using winglet vortex generators. CFD Letters, 11 (10). ISSN 2180-1363

Ng, Choy Peng (2019) Relative improvements in road mobility compared to improvements in road accessibility, urbanization and economic growth. Doctoral thesis, Universiti Putra Malaysia.

Ng, Khai Mun and Adam, Nor Mariah and Ab Kadir, Mohd Zainal Abidin (2019) Experimental Investigation of shading facade-integrated solar absorber system under hot tropical climate. Journal of Building Engineering, 23. pp. 136-143. ISSN 2352-7102

Ngabura, Mohammed and Hussain, Siti Aslina and Wan Ab. Karim Ghani, Wan Azlina and Jami, Mohammed S. and Tan, Yen Ping (2019) Optimization and activation of renewable durian husk for biosorption of lead (II) from a aqueous medium. Journal of Chemical Technology and Biotechnology, 94 (5). pp. 1384-1396. ISSN 0268-2575; ESSN: 1097-4660

Nik Ibrahim, Nik Nor Liyana and Asmawi, Aziah and Abdul Kadir, Suhaida and Teo, Rhun Ming (2019) Putra BINGO : from pen and paper to digital. In: 2019 IEEE Conference on Graphics and Media (GAME), 19-21 Nov. 2019, Parkroyal Penang Resort, Penang, Malaysia. (pp. 22-25).

Nik Murzaini, Nik Masturah (2019) Processing parameters in production of pumpkin powder using forced hot- air frying in ‘bingka’ baking. Masters thesis, Universiti Putra Malaysia.

Noor Hasnan, Noor Zafira and Ab Aziz, Norashikin and Taip, Farah Saleena and Zulkifli, Nur Balqis (2019) Spine layout design for improving food hygiene and reducing travelled distances in a small-scale burger patties processing. Food Research, 3 (4). pp. 295-304. ISSN 2550-2166

Noor Hasnan, Noor Zafira and Mohd Ramli, Sharifah Hafiza (2019) Modernizing the preparation of the Malaysian traditional mixed rice dishes with cook-chill central kitchen and implementation of HACCP. International Journal of Gastronomy and Food Science, 19. art. no. 100193. pp. 1-13. ISSN 1878-450X

Nor Halim, Nur Amiera and Mohtar, Mohd Nazim and Ramli, Muhammad Mahyiddin and Mohd Sidek, Roslina and Abd Wahab, Nur Zuraihan (2019) Fluoropolymer as dielectric in organic field effect transistor (OFET). In: 2019 4th IEEE International Circuit and System Symposium (ICSyS), 18-19 Sept. 2019, Hotel Istana, Kuala Lumpur, Malaysia. (pp. 1-5).

Nor Mohamed, Sity Ainy and Zainudin, Edi Syams and Salit, Mohd Sapuan and Md Deros, Mohd Azaman and Tajul ariffin, Ahmad Mubarak (2019) Integration of taguchi-grey relational analysis technique in parameter process optimization for rice husk composite. BioResources, 14 (1). pp. 1110-1126. ISSN 1930-2126

Nordin, Norzaima and Chandrasegaran, Thinesh and Harmin, Mohammad Yazdi (2019) Nonlinear reduced order model of rectangular high aspect ratio wing with and without follower force effects. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (1). pp. 117-134. ISSN 2289-7879

Norizan, Mohd Nurazzi and Abdan, Khalina and Salit @ Sinon, Mohd Sapuan and Rushdan, Ahmad Ilyas (2019) Mechanical properties of sugar palm yarn/woven glass fiber reinforced unsaturated polyester composites: effect of fiber loadings and alkaline treatment. Polimery, 64 (10). pp. 665-675. ISSN 0032-2725

Norman, Masayu (2019) Improvement on rooftop classification of worldview-3 imagery using object-based image analysis. Doctoral thesis, Universiti Putra Malaysia.

Norman, Masayu and Shafri, Helmi and Mansor, Shattri and Yusuf, Badronnisa (2019) Review of remote sensing and geospatial technologies in estimating rooftop rainwater harvesting (RRWH) quality. International Soil and Water Conservation Research, 7 (3). pp. 266-274. ISSN 2589-059X; 2095-6339

Noryani, Muhammad and Salit, Mohd Sapuan and Mastura, Mohammad Taha and Mohd Yusoff, Mohd Zuhri and Zainudin, Edi Syams (2019) Material selection of natural fibre using a stepwise regression model with error analysis. Journal of Materials Research and Technology, 8 (3). pp. 2865-2879. ISSN 2238-7854

Nozad Mahmood, Sarmad and Ishak, Asnor Juraiza and Hussain, Salam T. (2019) GSM based gas leak monitoring system. Periodicals of Engineering and Natural Sciences, 7 (2). pp. 670-678. ISSN 2303-4521

Olufemi, Osaji Emmanuel and Othman, Mohammad Lutfi and Hizam, Hashim and Othman, Muhammad Murtadha and Ammar, Aker Elhadi Emhemed Alhaaj and Okeke, Chidiebere Akachukwu and Onuabuchi, Nwagbara Samuel (2019) Hybrid signal processing and machine learning algorithm for adaptive fault classification of wind farm integrated transmision line protection. International Journal of Integrated Engineering, 11 (4). pp. 91-100. ISSN 2229-838X; ESSN: 2600-7916

Omale, Sunday Ogakwu and Choong, Thomas S. Y. and Abdullah, Luqman Chuah and Siajam, Shamsul Izhar and Yip, Mun W. (2019) Utilization of Malaysia EAF slags for effective application in direct aqueous sequestration of carbon dioxide under ambient temperature. Heliyon, 5 (10). pp. 1-8. ISSN 2405-8440

Ong, C. R. E. and Tang, T. K. and Lee, Y. Y. and Choong, Thomas Shean Yaw and Lai, Oi Ming and Kuan, C. H. and Phuah, Eng Tong (2019) Melting and crystallisation behaviour of soybean oil in blend with palm oil-based diacylglycerol. International Food Research Journal, 26 (3). pp. 781-791. ISSN 1985-4668; ESSN: 2231-7546

Onwude, Daniel I. and Hashim, Norhashila and Abdan, Khalina and Janius, Rimfiel and Chen, Guangnan (2019) The effectiveness of combined infrared and hot-air drying strategies for sweet potato. Journal of Food Engineering, 241. pp. 75-87. ISSN 0260-8774

Oon, Aslinda and Mohd Shafri, Helmi Zulhaidi and Lechner, Alex Mark and Azhar, Badrul (2019) Discriminating between large-scale oil palm plantations and smallholdings on tropical peatlands using vegetation indices and supervised classification of LANDSAT-8. International Journal of Remote Sensing, 20 (19). pp. 7312-7328. ISSN 0143-1161; ESSN: 1366-5901

Othman, Mohamed and Ahmed, Amodu Oluwatosin and Ahmad, Idawaty and Noordin, Nor Kamariah (2019) A primer on design aspects, recent advances, and challenges in cellular device-to-device communication. Ad Hoc Networks, 94. art. no. 101938. pp. 1-29. ISSN 1570-8705

Othman, Muhammad Murtadha and Mohd Jamaluddin, Muhammad Amirul Naim and Fauzi, Faisal and Musirin, Ismail and Othman, Mohammad Lutfi (2019) Improved reliability assessment of backup battery storage integrated with power supply system in a building. International Journal of Power Electronics and Drive Systems, 10 (3). pp. 1538-1546. ISSN 2088-8694

Othman, Siti Hajar and A. Kechik, Nurul R. and Shapi'i, Ruzanna and A. Talib, Rosnita and M. A. Tawakkal, Intan S. (2019) Water sorption and mechanical properties of starch/chitosan nanoparticle films. Journal of Nanomaterials, 2019. art. no. 3843949. pp. 1-12. ISSN 1687-4110; ESSN: 1687-4129

Othman, Siti Hajar and Ling, Hee Nyia and A. Talib, Rosnita and Naim, Mohd Nazli and Risyon, Nazratul Putri and Md. Saifullah (2019) PLA/MMT and PLA/Halloysite Bio-Nanocomposite Films: mechanical, barrier, and transparency. Journal of Nano Research, 59. pp. 77-93. ISSN 1662-5250; ESSN:1661-9897

Othman, Siti Hajar and Mohamed Amin Tawakkal, Intan Syafinaz and Basha, Roseliza Kadir and Abd Majid, Noorasyikin (2019) Tapioca starch films reinforced with microcrystalline cellulose for potential food packaging application. Food Science and Technology, 39 (1). pp. 605-612. ISSN 0101-2061; ESSN: 1678-457X

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2019) Trade-off in robustness, cost and performance by a multi-objective robust production optimization method. International Journal of Industrial Engineering Computations, 10 (1). pp. 133-148. ISSN 1923-2926; ESSN: 1923-2934

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah and Ebrahim, Nader Ale (2019) Recent developments in metamodel based robust black-box simulation optimization: an overview. Decision Science Letters, 8 (1). pp. 17-44. ISSN 1929-5804; ESSN: 1929-5812

Ponichan, Hairi (2019) Improvement of energy performance indicator for buildings in Malaysia. Masters thesis, Universiti Putra Malaysia.

Pshtiwan, M. Sharif and A. Aziz, Hairuddin and Azizan, As'ary and Khairil Anas, Md. Rezali and M. M., Noor and Shareef, Saman M. (2019) Development of evaporative intercooler heat exchanger for vehicle charge air enhancement using CFD simulation. Journal of Mechanical Engineering and Sciences, 13 (4). pp. 6195-6217. ISSN 2231-8380

Pua'at, Ahmad Afifi and Matdaud, Zulkifli and Zhahir, Amzari and Ahmad, Mohamed Tarmizi and Hassan, Aziz (2019) Case study on aerodynamics stability of bixel wing-in-ground effect craft. IOP Conference Series: Materials Science and Engineering, 642. pp. 1-14. ISSN 1757-8981; ESSN: 1757-899X

Pudza, Musa Yahaya and Zainal Abdin, Zurina and Abdul Rashid, Suraya and Md. Yassin, Faizah and Muhammad Noor, Ahmad Shukri and Issa, Mohammed Abdullah (2019) Synthesis and characterization of fluorescent carbon dots from tapioca. ChemistrySelect, 4 (14). pp. 4140-4146. ISSN 2365-6549

Pudza, Musa Yahaya and Zainal Abidin, Zurina and Abdul Rashid, Suraya and Md. Yasin, Faizah and Muhammad Noor, Ahmad Shukri and Issa, Mohammed Abdullah (2019) Sustainable synthesis processes for carbon dots through response surface methodology and artificial neural network. Processes, 7 (10). art. no. 704. pp. 1-19. ISSN 2227-9717

Qader, Bootan S. and Supeni, Eris Elianddy and Ariffin, Mohd Khairol Anuar and AbuTalib, Abd Rahim (2019) RSM approach for modeling and optimization of designing parameters for inclined fins of solar air heater. Renewable Energy, 136. pp. 48-68. ISSN 0960-1481; ESSN: 1879-0682

Qader, Bootan Sherzad and Supeni, Eris Elianddy and Ariffin, Mohd Khairol Anuar and Abu Talib, Abd. Rahim (2019) Numerical investigation of flow through inclined fins under the absorber plate of solar air heater. Renewable Energy, 141. pp. 468-481. ISSN 0960-1481; ESSN: 1879-0682

Rabby, Md Insiat Islam and Masuri, Siti Ujila and Kaniappan, Lingeswaran and Loulou, Tahar and Sadrul Islam, A. K. M. (2019) Effect of water based nanofluids on laminar convective heat transfer in developing region of rectangular channel. CFD Letters, 11 (12). pp. 74-87. ISSN 2180-1363

Radzi, A. M. and Sapuan, Salit M. and Jawaid, Mohammad and Mansor, Muhd Ridzuan (2019) Water absorption, thickness swelling and thermal properties of roselle/sugar palm fibre reinforced thermoplastic polyurethane hybrid composites. Journal of Materials Research and Technology, 8 (5). pp. 3988-3994. ISSN 2238-7854

Raheem, Enas A. and Syed Ahmad, Sharifah Mumtazah (2019) Statistical analysis of image quality measures for face liveness detection. Lecture Notes in Electrical Engineering, 547. pp. 543-549. ISSN 1876-1100; ESSN: 1876-1119

Rahman, Ziaur (2019) Totally opportunistic routing algorithm for underwater wireless sensor network. Doctoral thesis, Universiti Putra Malaysia.

Rahmat, Fariq and Ishak, Asnor Juraiza and Zulkafli, Zed and Yahaya, Hazlina and Masrani, Afiqah (2019) Prediction model of leptospirosis occurrence for Seremban (Malaysia) using meteorological data. International Journal of Integrated Engineering, 11 (4). pp. 61-69. ISSN 2229-838X

Rahmat, Mohamad Fariq (2019) Feature selection methods based on meteorological data for prediction of leptospirosis occurrence in Seremban, Malaysia. Masters thesis, Universiti Putra Malaysia.

Raidah, Rami Ba and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Supeni, Eris Elianddy (2019) Improving quality management methods in manufacturing SMEs: a conceptual framework. International Journal of Advanced Science and Technology, 28 (10). pp. 300-307. ISSN 2005-4238; ESSN: 2207-6360

Raja Abdullah, Raja Syamsul Azmir and Salah, Asem Ahmad and Ismail, Alyani and Sali, Aduwati and Musa, Surajo Alhaji and Abdul Rashid, Nur Emileen and Ibrahim, Idnin Pasya (2019) A review of copter drone detection using radar systems. Defence S and T Technical Bulletin. pp. 16-38. ISSN 1985-6571

Raja Abdullah, Raja Syamsul Azmir and Saleh, Nur Luqman and Syed Abdul Rahman, Sharifah Mumtazah and Zamri, Nur Syazmira and Abdul Rashid, Nur Emileen (2019) Texture classification using spectral entropy of acoustic signal generated by a human echolocator. Entropy, 21 (10). art. no. 63. pp. 1-20. ISSN 1099-4300

Raja Shahruzzaman, Raja Mohamad Hafriz (2019) Modified dolomite-based catalyst for biofuel production via catalytic pyrolysis of waste cooking oil. Doctoral thesis, Universiti Putra Malaysia.

Raja Zazalli, Raja Munawarrah (2019) Conversion of waste palm kernel cake into value-added materials using subcritical water reaction. Masters thesis, Universiti Putra Malaysia.

Rambli, Jakaria (2019) Biochar production from sago (Metroxylon Spp.) via pyrolysis. Masters thesis, Universiti Putra Malaysia.

Ramlee, Nor Azlina and Jawaid, Mohammad and Zainudin, Edi Syams and Yamani, Shaikh Abdul Karim (2019) Modification of oil palm empty fruit bunch and sugarcane bagasse biomass as potential reinforcement for composites panel and thermal insulation materials. Journal of Bionic Engineering, 16. pp. 175-188. ISSN 1672-6529; ESSN: 2543-2141

Ramlee, Ridza Azri (2019) Detection of corneal arcus using rubber sheet and machine learning methods. Doctoral thesis, Universiti Putra Malaysia.

Ramli, Azlinda (2019) Integrated X-band miniaturized stack bandpass filtenna with metamaterial superstrate. Doctoral thesis, Universiti Putra Malaysia.

Ramli, Saliza and Raja Ahmad, Raja Mohd Kamil and Ahmad, Siti Anom and Mahmud, Rozi and Mohtarrudin, Norhafizah (2019) Skin blood flow response signal using time and frequency domain features for pressure ulcer evaluation. International Journal of Integrated Engineering, 11 (3). pp. 31-41. ISSN 2229-838X; ESSN : 2600-7916

Ranjan, Mokhtar Zamimi and Baharudin, B. T. Hang Tuah and Mahadi, Muhammad Razif and Baharudin, Mohd Rafee (2019) Developing a Construction Occupational Safety and Health Risk Assessment Matrix (COSHRAM) with modifying risk factors. International Journal of Recent Technology and Engineering, 8 (1C2). pp. 301-307. ISSN 2277-3878

Rasheed, Hussein Saeed (2019) Improvement in lubricating properties of engine oil by blending with palm oil, trimethylolpropane ester and nanoparticles. Masters thesis, Universiti Putra Malaysia.

Rashid, Umer and Ahmad, Junaid and Ibrahim, Mohd Lokman and Nisar, Jan and Hanif, Muhammad Asif and Choong, Thomas Shean Yaw (2019) Single-pot synthesis of biodiesel using efficient sulfonated-derived tea waste-heterogeneous catalyst. Materials, 12 (14). art. no. 2293. pp. 1-16. ISSN 1996-1944

Rashid, Umer and Soltani, Soroush and Choong, Thomas Shean Yaw and Nehdi, Imededdine Arbi and Ahmad, Junaid and Ngamcharussrivichai, Chawalit (2019) Palm biochar-based sulphated zirconium (Zr-AC-HSO3) catalyst for methyl ester production from palm fatty acid distillate. Catalysts, 9 (12). art. no. 1029. pp. 1-15. ISSN 2073-4344

Rasool, Zahid and Tariq, Waqar and Othman, Mohammad Lutfi and Jasni, Jasronita (2019) What building management system can offer to reduce power wastage both social and economical: brief discussion by taking Malaysian power infrastructure as a sample. The SIJ Transactions on Advances in Space Research & Earth Exploration (ASREE), 7 (1). pp. 1-5. ISSN 2347-6087

Rayney Azmi, Ahmad Mustafa and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Md Shah, Ain Umaira and Mohd Nor, Ariff Farhan and Abdul Majid, Mohd Shukry and Muhamad, Sallehuddin and Abu Talib, Abd. Rahim (2019) Impact properties of kenaf fibre/X-ray films hybrid composites for structural applications. Journal of Materials Research and Technology, 8 (2). pp. 1982-1990. ISSN 2238-7854; ESSN: 2044-5326

Razzaq, Alaa Mohammed and Abang Haji Abdul Majid, Dayang Laila and Ishak, Mohamad Ridzwan and Al-Naib, Uday Muwafaq Basheer (2019) The influence of fly ash on the microstructure and mechanical properties AA6063 alloy using compocasting technique. Materials Express, 9 (1). pp. 1-14. ISSN 2158-5849; ESSN: 2158-5857

Renny Eka Putri and Yahya, Azmi and Adam, Nor Mariah and Abd Aziz, Samsuzana (2019) Rice yield prediction model with respect to crop healthiness and soil fertility. Food Research, 3 (2). pp. 174-180. ISSN 2550-2166

Rezaei, Nima and Uddin, Mohammad Nasir and Amin, Ifte Khairul and Othman, Mohammad Lutfi (2019) Genetic algorithm-based optimization of overcurrent relay Coordination for improved protection of DFIG operated wind farms. IEEE Transactions on Industry Applications, 55 (6). pp. 5727-5736. ISSN 0093-9994

Rezaei, Nima and Uddin, Mohammad Nasir and Amin, Ifte Khairul and Othman, Mohammad Lutfi and Marsadek, Marayati (2019) A novel differential-based protection scheme for intertie zone of large-scale centralized DFIG wind farms. In: 54th IEEE Industry Applications Society Annual Meeting (IAS 2019), 29 Sept.-3 Oct. 2019, Baltimore, Maryland, USA. (pp. 1-8).

Romli, Fairuz Izzudin and Aminian, Negin Ozve and Hamzah, Norfara Aiza (2019) Identification of common sitting postures of aircraft passengers through observation method. International Journal of Recent Technology and Engineering, 7 (6). pp. 218-221. ISSN 2277-3878

Romli, Fairuz Izzudin and Zahari, Abdul Raof (2019) Analysis of suborbital flight operation using PESTLE. Journal of Atmospheric and Solar-Terrestrial Physics, 192. pp. 1-8. ISSN 1364-6826; ESSN: 1879-1824

Roslan, Jumardi and Mustapa Kamal, Siti Mazlina and Md. Yunos, Khairul Faezah and Abdullah, Norhafizah (2019) Assessment on flux reduction and protein rejection behavior in fractionating tilapia by-product protein hydrolysate by ultrafiltration membrane. Pertanika Journal of Science & Technology, 27 (S1). pp. 67-80. ISSN 0128-7680; ESSN: 2231-8526

Rushdan, Ahmad Ilyas and Salit, Mohd Sapuan and Ibrahim, Rushdan and Abral, Hairul and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams and Mahamud, S. N. Atikah and Norizan, Mohd Nurazzi and A., Atiqah and Ansari, M. N. M and Edi Syafri and Mochamad Asrofi and Nasmi Herlina Sari and Jumaidin, Ridhwan (2019) Effect of sugar palm nanofibrillated cellulose concentrations on morphological, mechanical and physical properties of biodegradable films based on agro-waste sugar palm (Arenga pinnata (Wurmb.) Merr) starch. Journal of Materials Research and Technology, 8 (5). pp. 4819-4830. ISSN 2238-7854

Rushdan, Ahmad Ilyas and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams and Mahamud, Atikah (2019) Characterization of sugar palm nanocellulose and its potential for reinforcement with starch-based composite. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Florida, 189 - 219. ISBN 9781498753029; EISBN: 9780429443923

Ruslan, Rashidah and Bejo, Siti Khairunniza and Rukunudin, Ibni Hajar and Ibrahim, Mohd Firdaus and Aznan, Aimi Athirah (2019) RiSe-IViS: rice seed inspection vision system. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 161-163).

Ruslan, Siti Aisyah and Muharam, Farrah Melissa and Zulkafli, Zed and Omar, Dzolkhifli and Zambri, Muhammad Pilus (2019) Using satellite-measured relative humidity for prediction of Metisa plana’s population in oil palm plantations: a comparative assessment of regression and artificial neural network models. PLoS One, 14 (10). pp. 1-15. ISSN 1932-6203

S. A., Alamin Gabasa and Md Razali, Khairil Anas and As'arry, Azizan and Abdul Jalil, Nawal Aswan (2019) Vibration transmitted to the hand by backpack blowers. International Journal of Automotive and Mechanical Engineering, 16 (2). pp. 6697-6705. ISSN 2229-8649; ESSN: 2180-1606

S. Z., Khamis and M. H., Othman and S., Hasan and N. M., Main and S. R., Masrol and M. F., Shaari and S. N., Ibrahim and S., Salim (2019) Multiple responses optimisation in injection moulding parameter for polypropylene-nanoclay-gigantochloa scortechinii via Taguchi method. Journal of Physics: Conference Series, 1150. art. no. 012062. pp. 1-7. ISSN 1742-6588; ESSN: 1742-6596

Saadon, Syamimi and Helman, Harlinda (2019) Design and modelling of a beta-type stirling engine for waste heat recovery. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (1). pp. 135-142. ISSN 2289-7879

Sabli, Nordin and Abu Bakar, Nur Asyreen and Siajam, Shamsul Izhar and Hilal, Hikmat S. (2019) Membrane electrode assembly with high efficiency and stability: effect of solvent type and membrane composition. Sains Malaysiana, 48 (4). pp. 877-885. ISSN 0126-6039

Sabo, Aliyu and Abdul Wahab, Noor Izzri (2019) Rotor angle transient stability methodologies of power systems: a comparison. In: 2019 17th IEEE Student Conference on Research and Development (SCOReD), 15-17 Oct. 2019, Universiti Teknologi PETRONAS, Malaysia. (pp. 1-6).

Sabry, Ahmad H. and Wan Hasan, Wan Zuha and Sabri, Yasameen H. and Ab Kadir, Mohd Zainal Abidin (2019) Silicon PV module fitting equations based on experimental measurements. Energy Science and Engineering, 7 (1). pp. 132-145. ISSN 2050-0505

Sabry, Riyadh Z. and Gomes, Ashen and Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin and Misron, Norhisam (2019) Frequency dependent permittivity of soil and bentonite: for lightning protection and high frequency earthing systems. In: 15th International Symposium on Lightning Protection (SIPDA 2019), 30 Sept.-4 Oct. 2019, Sao Paulo, Brazil. .

Sadrolhosseini, Amir Reza and Habibiasr, Mina and Shafie, Suhaidi and Soleimani, Hassan and Lim, Hong Ngee (2019) Optical and thermal properties of laser-ablated platinum nanoparticles graphene oxide composite. International Journal of Molecular Sciences, 20 (24). art. no. 6153. pp. 1-19. ISSN 1661-6596; ESSN: 1422-0067

Safri, Syafiqah Nur Azrie and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Abdul Majid, Mohd Shukry (2019) Analysis of dynamic mechanical, low-velocity impact and compression after impact behaviour of benzoyl treated sugar palm/glass/epoxy composites. Composite Structures, 226. art. no. 111308. pp. 1-8. ISSN 0263-8223; ESSN: 1879-1085

Saidin, Norazlina and Idris, Nur Farahi and Yaacob, Mohd Hanif and Harun, Sulaiman Wadi and Md Ralib @ Md Raghib, Aliza 'Aini and Hasbullah, Nurul Fadzlin (2019) Single-mode fiber coated with zinc oxide (ZnO) nanorods for H2 gas sensor applications. In: 2019 IEEE International Conference on Sensors and Nanotechnology, 24-25 July 2019, Penang, Malaysia. .

Sairy, Nur Aqilah and Mazlan, Norkhairunnisa and Ishak, Mohamad Ridzwan and Zulkepli, Nik Noriman (2019) Effect inclusion of graphene on the mechanical properties of polymer nanocomposites. International Journal of Recent Technology and Engineering, 8 (2 spec. 4). pp. 469-472. ISSN 2277-3878

Saleh, Nur Luqman (2019) Detection of human echolocator mouth-click signal using bio-inspired processing. Doctoral thesis, Universiti Putra Malaysia.

Salit, Mohd Sapuan and Abral, Hairul and Ilyas, R. A. and Basri, Azmi and Muhammad, Faris and Ternando, Yuzalmi and Mahardika, Melbi and Hafizulhaq, Fazli and Sugiarti, Eni and Stephane, Iifa (2019) A simple method for improving the properties of the sago starch films prepared by using ultrasonication treatment. Food Hydrocolloids, 93. pp. 276-283. ISSN 0268-005X

Salit, Mohd Sapuan and C. C. Y., Adrian and Sanyang, Muhammed Lamin and Ishak, Mohamad Ridzwan and Leman, Zulkiflle and Hadi, Agung Efriyo (2019) Sugar palm: challenges and opportunities. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton, 1 - 14. ISBN 9781498753029; EISBN: 9780429443923

Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Muthukumar, Chandrasekar and Latiff, M. A. S. and Ya'acob, A. M. and Mazlan, Norkhairunnisa and Shahroze, Rao M. (2019) Preparation and characterization of sugar palm fibers. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton, Florida, 71 - 88. ISBN 9781498753029; EISBN 9780429443923

Salit, Mohd Sapuan and Mansor, Muhd Ridzuan and Mohammad Taha, Mastura and Zainuddin, Ainur Zaireen (2019) The environmental impact of natural fiber composites through life cycle assessment analysis. In: Durability and Life Prediction in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites. Composites Science and Engineering . Woodhead Publishing, United Kingdom, 257 - 285. ISBN 9780081022900

Salit @ Sinon, Mohd Sapuan and Rushdan, Ahmad Ilyas and Ishak, Muhammad Ammar and Leman, Zulkiflle and Mohd Roslim, Muhammad Huzaifah and Ishak, Muhammad Ammar and Mahamud, Siti Nur Atikah (2019) Development of sugar palm-based products: a community project. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton, Florida, 245 - 265. ISBN 9781498753029; EISBN: 9780429443923

Samin, Razali and Nuawi, Mohd Zaki and A. Ghani, Jaharah and Mohamed. Haris, Sallehuddin (2019) Research and modelling of surface roughness, cutting forces and I-kaz coefficients for S42C in turning using response surface methodology. International Journal of Innovative Technology and Exploring Engineering, 8 (12 spec. 2). pp. 608-620. ISSN 2278-3075

Samin, Razali and Nuawi, Mohd Zaki and Azmi, Farhan Akmal and Mohamed Haris, Sallehuddin and A. Ghani, Jaharah (2019) Research of chatter suppression in turning operation with process damping using stability lobe diagram. International Journal of Innovative Technology and Exploring Engineering, 8 (12 spec. 2). pp. 539-543. ISSN 2278-3075

Sapri, Nur Shafiqah and Jamaludin, Diyana (2019) Determination of pure and adulterated stingless bee honey based on dielectric properties. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 97-101).

Sari, Anjar Ruspita and Abdul Rahman, Russly and Shukri, Radhiah and Hussain, Norhayati (2019) Improvement process of partially cooked corn grit (PCCG) preparation. International Food Research Journal, 26 (2). pp. 537-546. ISSN 1985-4668; ESSN: 2231-7546

Sasse, Manuela Zude and Hashim, Norhashila and Hass, Roland and Polley, Nabarun and Regen, Christian (2019) Validation study for measuring absorption and reduced scattering coefficients by means of laser-induced backscattering imaging. Postharvest Biology and Technology, 153 (1). pp. 161-168. ISSN 0925-5214; ESSN 1873-2356

Sauli, Shazmira Azwa and Ishak, Mohamad Ridzwan and Mustapha, Faizal and Yidris, Noorfaizal and Hamat, Sanusi (2019) Hybridization of TRIZ and CAD-analysis at the conceptual design stage. International Journal of Computer Integrated Manufacturing, 32 (9). art. no. https://www.tandfonline.com/doi/abs/10.1080/0951192X.2019.1644536?journalCode=tcim20. pp. 890-899. ISSN 0951-192X; ESSN: 1362-3052

Senthilkumar, Krishnasamy and Saba, Naheed and Chandrasekar, Muthukumar and Jawaid, Mohammad and Rajini, N. and Alothman, Othman Y. and Siengchine, Suchart (2019) Evaluation of mechanical and free vibration properties of the pineapple leaf fibre reinforced polyester composites. Construction and Building Materials, 195. pp. 423-431. ISSN 0950-0618

Shaari, Nurfarhana and Shamsudin, Rosnah and Mohd Nor, Mohd Zuhair and Hashim, Norhashila and Hamzah, Azman (2019) Effect of storage duration on the color value of sweet potatoes (Ipomoea batatas). In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 111-114).

Shaban, Suraya and Shafie, Suhaidi and Mustafa, Mohd Amrallah and Sudhir, Pandey Shyam and Ahmad, Fauzan and Hamidon, Mohd Nizar and Lokman, Muhammad Quisar and Mohamed Sharif, Noor Fadzilah (2019) Efficiency performance effect of TiO2 thickness deposited on FTO coated glass photoanode. In: 2019 4th IEEE International Circuit and System Symposium (ICSyS), 18-19 Sept. 2019, Hotel Istana, Kuala Lumpur, Malaysia. (pp. 1-4).

Shaban, Suraya and Shafie, Suhaidi and Pandey, S. S. and Lokman, Muhammad Quisar and Ahmad, Fauzan and Hamidon, Mohd Nizar and Mohamed Sharif, Noor Fadzilah (2019) Back-illuminated dye sensitized solar cell flexible photoanode on titanium foil. ASM Science Journal, 12 (4). pp. 29-35. ISSN 1823-6782

Shaharum, Nur Shafira Nisa (2019) Mapping of oil palm land cover using integration of cloud computing, machine learning and big data. Masters thesis, Universiti Putra Malaysia.

Shaharum, Nur Shafira Nisa and Mohd Shafri, Helmi Zulhaidi and Wan Ab. Karim Ghani, Wan Azlina and Samsatli, Sheila and Prince, Husni Mobarak and Yusuf, Badronnisa and Hamud, Ahmed Mohamed (2019) Mapping the spatial distribution and changes of oil palm land cover using an open source cloud-based mapping platform. International Journal of Remote Sensing, 40 (19). pp. 7459-7476. ISSN 0143-1161; ESSN: 1366-5901

Shaharum, Nur Shafira Nisa and Mohd Shafri, Helmi Zulhaidi and Wan Ab. Karim Ghani, Wan Azlina and Samsatli, Sheila and Yusuf, Badronnisa (2019) Mapping the distribution of oil palm using Landsat 8 data by comparing machine learning and non-machine learning algorithms. Pertanika Journal of Science & Technology, 27 (S1). pp. 123-135. ISSN 0128-7680; ESSN: 2231-8526

Shaharuzaman, Mohd Adrinata and Salit, Mohd Sapuan and Mansor, Muhd Ridzuan and Mohamed Yusoff, Mohd Zuhri (2019) Decision support strategy in selecting natural fiber materials for automotive side-door Impact beam composites. Journal of Renewable Materials, 17 (10). pp. 997-1010. ISSN 2164-6325; ESSN: 2164-6341

Shaharuzaman, Mohd Adrinata and Salit, Mohd Sapuan and Mansor, Muhd Ridzuan and Mohamed Yusoff, Mohd Zuhri (2019) The weighting of product design specification for a composite side-door impact beam using the analytic hierarchy process method. International Journal of Materials and Product Technology, 59 (1). pp. 63-80. ISSN 0268-1900; ESSN: 1741-5209

Shahot, Khaled and Idris, Azni and Omar, Rozita and Che Man, Hasfalina and Suja, Fatihah (2019) Investigation of activated carbon coating in the adsorption process of methylene blue from aqueous solution. Advanced Science, Engineering and Medicine, 11. pp. 879-887. ISSN 2164-6635

Shair, Ezreen Farina (2019) Core lifting task assessment using time-frequency distribution of surface electromyogram signal. Doctoral thesis, Universiti Putra Malaysia.

Shamsudin, Intan Soraya and Anuar, Mohd Shamsul and Yusof, Yus Aniza and Mohd Hanif, Ahmad Husni and Mohd Tahir, Suraya (2019) Improvement in the mechanical strength of compacted urea fertilizer tablets through die wall lubrication. Pertanika Journal of Science & Technology, 27 (1). pp. 193-203. ISSN 0128-7680; ESSN: 2231-8526

Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq (2019) Fatigue life prediction of textile/woven hybrid composites. In: Durability and Life Prediction in Biocomposites, Fibre- Reinforced Composites and Hybrid Composites. Woodhead Publishing Series in Composites Science and Engineering . Woodhead Publishing, United Kingdom, 63 - 82. ISBN 9780081022900

Shazali, Nur Aima Hafiza and Zaidi, Noorzaileen Eileena and Ariffin, Hidayah and Abdullah, Luqman Chuah and Ghaemi, Ferial and Abdullah, Jafri Malin and Takashima, Ichiro and Nik Abd Rahman, Nik Mohd Afizan (2019) Characterization and cellular internalization of spherical cellulose nanocrystals (CNC) into normal and cancerous fibroblasts. Materials, 12 (19). art. no. 3251. pp. 1-16. ISSN 1996-1944

Sheh Omar, Nur Alia and Yap, Wing Fen and Abdullah, Jaafar and Mat Zaid, Mohd Hazani and Mohd Daniyal, Wan Mohd Ebtisyam Mustaqim and Mahdi, Mohd Adzir (2019) Sensitive surface plasmon resonance performance of cadmium sulfide quantum dots-amine functionalized graphene oxide based thin film towards dengue virus E-protein. Optics & Laser Technology, 114. pp. 204-208. ISSN 0030-3992; ESSN: 1879-2545

Shehu, Umar Etsu and Mokhtar, Mohd Noriznan and Mohd Nor, Mohd Zuhair and Samsu Baharuddin, Azhari and Mat Nawi, Nazmi (2019) A study on the use of water as a medium for the thermal inactivation of endogenous lipase in oil of palm fruit. Energies, 12 (20). art. no. 3981. pp. 1-16. ISSN 1996-1073

Shehu, Umar Etsu and Tan, Qee Chowa and Hafid, Halimatun Saadiah and Mokhtar, Mohd Noriznan and Baharuddin, Azhari Samsu and Mat Nawi, Nazmi (2019) Kinetics of thermal hydrolysis of crude palm oil with mass and heat transfer in a closed system. Food and Bioproducts Processing, 118. pp. 187-197. ISSN 0960-3085

Shirazi, Ahmad A H S (2019) Development of wireless structural health monitoring system for oil and gas pipelines. Doctoral thesis, Universiti Putra Malaysia.

Shojaei, Taha Roodbar and Mohd Salleh, Mohamad Amran and Mobli, Hossein and Aghbashlo, Mortaza and Tabatabaei, Meisam (2019) Multivariable optimization of carbon nanoparticles synthesized from waste facial tissues by artificial neural networks, new material for downstream quenching of quantum dots. Journal of Materials Science: Materials in Electronics, 30. pp. 3156-3165. ISSN 0957-4522; ESSN: 1573-482X

Shukri, Muhammad Safwan and Azis, Norhafiz and Jasni, Jasronita and Yunus, Robiah and Yaakub, Zaini (2019) Investigation on the effect of moisture on AC breakdown voltage of refined, bleached, and deodorized palm oil. In: 2019 4th IEEE International Circuit and System Symposium (ICSyS), 18-19 Sept. 2019, Hotel Istana, Kuala Lumpur, Malaysia. (pp. 1-4).

Siajam, Shamsul Izhar and Muda, Noor Azura and Yoshida, Hiroyuki and Ishak, Hazwani and Ismail, Mohd Halim Shah (2019) Conversion of oil palm trunk into bio-oil via treatment with subcritical water. Journal of Wood Chemistry and Technology, 39 (4). pp. 255-269. ISSN 1532-2319

Siajam, Shamsul Izhar and Yoshida, Hiroyuki and Nishio, Eiichiro and Utsumi, Yasuhiko and Kakimori, Nobuaki (2019) Removal and recovery attempt of liquid crystal from waste LCD panels using subcritical water. Waste Management, 92. pp. 15-20. ISSN 0956-053X; ESSN: 1879-2456

Siakeng, Ramengmawii and Jawaid, Mohammad and Ariffin, Hidayah and Salit @ Sinon, Mohd Sapuan (2019) Mechanical, dynamic, and thermomechanical properties of coir/pineapple leaf fiber reinforced polylactic acid hybrid biocomposites. Polymer Composites, 40 (5). pp. 2000-2011. ISSN 0272-8397; ESSN: 1548-0569

Silas, Kiman (2019) Simultaneous SO₂/NOₓ removal from flue gas using catalyzed adsorbents. Doctoral thesis, Universiti Putra Malaysia.

Silva, Filipa Vinagre Marques and Sulaiman, Alifdalino (2019) Polyphenoloxidase in fruit and vegetables: inactivation by thermal and non-thermal processes. In: Encyclopedia of Food Chemistry. Elsevier, United States, 287 - 301. ISBN 9780128140260; EISBN: 9780128140451

Sim, Bernard Maxmillan (2019) Pitting corrosion resistance with shielded metal arc welding and post weld heat treatment on duplex stainless steel weld overlay. Doctoral thesis, Universiti Putra Malaysia.

Sim, Bernard Maxmillan and Hong, Tang Sai and Mohamed Ariff, Azmah Hanim and Tchan, Edwin Jong Nyon and Talari, Mahesh Kumar (2019) The influence of post weld heat treatment precipitation on duplex stainless steels weld overlay towards pitting corrosion. Materials, 12 (20). pp. 1-11. ISSN 1996-1944

Sivapragasam, Magaret and Wilfred, Cecilia Devi and Jaganathan, Joshua Raj and Krishnan, Sooridarsan and Wan Ab. Karim Ghani, Wan Azlina (2019) Choline-based ionic liquids as media for the growth of Saccharomyces cerevisiae. Processes, 7 (7). art. no. 471. pp. 1-13. ISSN 2227-9717

Soh, Yee Ling and Veerasamy, K. and Jamal, Mohamad Hidayat and Ab Razak, Mohd Shahrizal (2019) Preliminary modelling assessment of hydrodynamic simulation due to Terengganu Airport runway extension. IOP Conference Series: Earth and Environmental Science, 357. art. no. 012036. pp. 1-13. ISSN 1755-1307; ESSN: 1755-1315

Somadina, Ike Chidiebere (2019) Super resolution imaging using modified lanr based on separable filtering. Masters thesis, Universiti Putra Malaysia.

Soomro, Mehrullah and Hassan, Mohd Khair and Ahmad, Fauzi (2019) Modelling and validation of an electronic wedge brake system with realistic quarter car model for anti-lock braking system design. International Journal of Integrated Engineering, 11 (4). pp. 70-80. ISSN 2229-838X; ESSN: 2600-7916

Soon, Chu Yong and Abdul Rahman, Norizah and Tee, Yee Bond and A. Talib, Rosnita and Tan, Choon Hui and Abdan, Khalina and Chan, Eric Wei Chiang (2019) Electrospun biocomposite: nanocellulose and chitosan entrapped within a poly(hydroxyalkanoate) matrix for Congo red removal. Journal of Materials Research and Technology, 8 (6). pp. 5091-5102. ISSN 2238-7854

Suaisom, Pitchaya and Pholchan, Patiroop and Che Man, Hasfalina and Aggarangsi, Pruk (2019) Optimization of hydrothermal conditioning conditions for Pennisetum purpureum x Pennisetum americanum (Napier PakChong1 grass) to produce the press fluid for biogas production. Pertanika Journal of Science & Technology, 27 (S1). pp. 109-122. ISSN 0128-7680; ESSN: 2231-8526

Suhaimi, Nurud Suria (2019) Development of a smoke prediction model for stairways in a multi-storey building. Doctoral thesis, Universiti Putra Malaysia.

Sulaiman, S. and Nemati, J. and Majzoobi, G. H. and AlJermi, M. (2019) Experimental and numerical study of high strain rate property of pure copper processed by ECAE method. Advances in Materials and Processing Technologies, 5 (3). pp. 386-393. ISSN 2374-068X; ESSN: 2374-0698

Sulaiman, Safwan and Mokhtar, Mohd Noriznan and Mohd Nor, Mohd Zuhair and Md. Yunos, Khairul Faezah and Naim, Mohd Nazli (2019) Mass transfer with reaction kinetics of the biocatalytic membrane reactor using a fouled covalently immobilised enzyme layer (α–CGTase–CNF layer). Biochemical Engineering Journal, 152. art. no. 107374. ISSN 1369-703X

Sulaiman, Shamsuddin and Aljermi, M. and Ismail, Mohd Idris Shah and Fadzil, M. F. (2019) Thermal-induced defects and optimization of casting process. International Journal of mechanical Engineering and Robotics Research, 8 (6). pp. 1-5. ISSN 2278-0149

Suleiman @ Ahmad, Muhammad Jabir (2019) Development of inconel 718 parts produced by metal injection molding technique for aerospace application. Masters thesis, Universiti Putra Malaysia.

Sulin, Siti Naderah and Mokhtar, M. N. (2019) Residual crude palm oil resources and recovery method: a review. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 36-40).

Surlehan, H. F. and Noor Azman, N. A. and Zakaria, R. A. and Mohd Amin, N. A. (2019) Extraction of oil from passion fruit seeds using surfactant-assisted aqueous extraction. Food Research, 3 (4). pp. 348-356. ISSN 2550-2166

Syed Husin, Syarifah Aloyah and Muhammad, Farah Diana and Che Abdullah, Che Azurahanim and Ribut, Siti Huzaimah and Zulkifli, M. Z. and Mahdi, Mohd Adzir (2019) Zinc-oxide nanoparticle-based saturable absorber deposited by simple evaporation technique for Q-switched fiber laser. Chinese Physics B, 28 (8). pp. 84207-1. ISSN 1674-1056

T. Temitope, Dele Afolabi and Mohamed Ariff, Azmah Hanim and O. J., Ojo Kupoluyi and R., Calin (2019) Impact of different isothermal aging conditions on the IMC layer growth and shear strength of MWCNT-reinforced Sn-5Sb solder composites on Cu substrate. Journal of Alloys and Compounds, 808. pp. 1-12. ISSN 0925-8388; ESSN: 1873-4669

Talib, Ahmad Tarmezee and Chu, Chang Jie and P. Mohammed, Mohd Afandi and Samsu Baharuddin, Azhari and Mokhtar, Mohd Noriznan and Wakisaka, Minato (2019) On the nonlinear viscoelastic behaviour of fresh and dried oil palm mesocarp fibres. Biosystems Engineering, 186. pp. 307-322. ISSN 1537-5110

Talib, Ahmad Tarmezee and Mohammed, Mohd Afandi P. and Baharuddin, Azhari Samsu and Mokhtar, Mohd Noriznan and Wakisaka, Minato (2019) Mechanical characterisation of lignocellulosic fibres using toy bricks tensile tester. Journal of the Mechanical Behavior of Biomedical Materials, 97. pp. 58-64. ISSN 1751-6161

Tan, Ai Wei Ivy and Jamali, Nur Syakina and Winnie, Huong Tien Ting (2019) Phytoremediation of palm oil mill effluent (POME) using Eichhornia crassipes. Journal of Applied Science & Process Engineering (JASPE), 6 (1). pp. 340-354. ISSN 2289-7771

Tan, Teing Teing (2019) Stabilization of residual soil with alkali-activated fly ash and inclusion of treated coir fibre. Masters thesis, Universiti Putra Malaysia.

Tan, Teing Teing and Bujang, B. K. Huat and Anggraini, Vivi and Shukla, Sanjay Kumar and Nahazanan, Haslinda (2019) Strength behavior of fly ash-stabilized soil reinforced with coir fibers in alkaline environment. Journal of Natural Fibers, 18 (11). 1556 - 1569. ISSN 1544-0478; ESSN: 1544-046X

Tan, Teing Teing and Kim Huat, Bujang and Shukla, Sanjay Kumar and Anggraini, Vivi and Nahazanan, Haslinda (2019) Effects of alkali-activated waste binder in soil stabilization. International Journal of GEOMATE, 17 (59). pp. 82-89. ISSN 2186-2982; ESSN: 2186-2990

Tapia, John Frederick D. and Samsatli, Sheila and Doliente, Stephen S. and Martinez-Hernandez, Elias and Wan Ab. Karim Ghani, Wan Azlina and Lim, Kean Long and Mohd Shafri, Helmi Zulhaidi and Shaharum, Nur Shafira Nisa (2019) Design of biomass value chains that are synergistic with the food–energy–water nexus: strategies and opportunities. Food and Bioproducts Processing, 116. pp. 170-185. ISSN 0960-3085

Taray, Insha Ahmed and Mohd Rafie, Azmin Shakrine and Zuber, Mohammad and Ahmad, Kamarul Arifin (2019) Hydrodynamics of bluefin tuna - a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (2). pp. 293-303. ISSN 289-7879

Tariq, Waqar and Daud, Muhammad Lutfi and Akhtar, Shameem and Tariq, Fareeha (2019) Gait feature based on human identification & classification by using artificial neural network and project management approaches for its implementation. International Journal of Engineering & Technology, 8 (1 spec.7). pp. 133-137. ISSN 2227-5258; ESSN: 2227-524X

Tay, Chai Hua and Mazlan, Norkhairunnisa (2019) Correlation between flexural and compressive properties of kenaf/epoxy composite filled with mesoporous silica. International Journal of Recent Technology and Engineering, 8 (2S4). pp. 486-491. ISSN 2277-3878

Tengku Mohd, Tengku Azman and Hassan, Mohd Khair and Aris, Ishak and Che Soh, Azura (2019) Modelling and simulation of battery electric vehicle with consideration of propulsion load and auxiliary load. In: International MAAC Symposium 2019, 24-26 Sept. 2019, Politeknik Sultan Mizan Zainal Abidin, Terengganu, Malaysia. (pp. 1-10).

Thiruvenkadam, Selvakumar and Izhar, Shamsul and Hiroyuki, Yoshida and Harun, Razif (2019) One-step microalgal biodiesel production from Chlorella pyrenoidosa using subcritical methanol extraction (SCM) technology. Biomass and Bioenergy, 120. pp. 265-272. ISSN 0961-9534

Tuan Abdul Rahman, Tuan Ahmad Zahidi and As'arry, Azizan and Abdul Jalil, Nawal Aswan and Raja Ahmad, Raja Mohd Kamil (2019) Dynamic modelling of a flexible beam structure using feedforward neural networks for active vibration control. International Journal of Automotive and Mechanical Engineering, 16 (1). pp. 6263-6280. ISSN 2229-8649; ESSN: 2180-1606

Usman Bashar, Zubairu and Wayayok, Aimrun and Graham, W.B.R. and Mahadi @ Othman, Muhammad Razif (2019) SRI single seedling transplanting implement: an innovative technique to challenges on SRI planting and spacing techniques. Food Research, 3 (2). pp. 167-173. ISSN 2550-2166

Veerapandiyan, Veerasamy and Abdul Wahab, Noor Izzri and Ramachandran, Rajeswari and Mariammal, Thirumeni and Subramaniam, Chitra and Othman, Mohammad Lutfi and Hizam, Hashim (2019) High-impedance fault detection in medium-voltage distribution network using computational intelligence-based classifiers. Neural Computing and Applications, 31. pp. 9127-9143. ISSN 0941-0643; ESSN: 1433-3058

Veerasamy, Veerapandiyan and Abdul Wahab, Noor Izzri and Ramachandran, Rajeswari and Vinayagam, Arangarajan and Othman, Mohammad Lutfi and Hizam, Hashim and Satheeshkumar, Jeevitha (2019) Automatic load frequency control of a multi-area dynamic interconnected power system using a hybrid PSO-GSA-tuned PID controller. Sustainability, 11 (24). art. no. 6908. pp. 1-20. ISSN 2071-1050

Wae Abdulkadir Usin, Wan Aisyah Fadilah and Md. Yunos, Khairul Faezah and Mohd. Amin, Nor Amaiza and Samsu Baharuddin, Azhari (2019) Fabrication and performance of PSf/CA ultrafiltration membranes: effect of additives for fouling resistance and selective polyphenol removal from apple juice. BioResources, 14 (1). pp. 737-754. ISSN 1930-2126

Wagiman, N. A. and Nawi, N. M. and Yahya, A. and Su, A. S. M. and Nasir, R. M. (2019) Field performance comparison of the combine harvesters utilized for rice harvesting in Malaysia. Food Research, 3 (2). pp. 177-181. ISSN 2550-2166

Wahi, Rafeah and Bidin, Effa Radika and Mohamed Asif, Nawwar Muntaj and Nor Hamizat, Nur Athirah and Ngaini, Zainab and Omar, Rozita and Jamel, Jamliah (2019) Nutrient availability in sago bark and empty fruit bunch composts for the growth of water spinach and green mustard. Environmental Science and Pollution Research, 26. pp. 22246-22253. ISSN 0944-1344; ESSN: 1614-7499

Wahid, Zaliha and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Mustapha, Faizal and Ismail, Mohd Idris Shah (2019) A study on properties of polymer-based additive manufacturing. Jurnal Kejuruteraan, 31 (1). pp. 93-98. ISSN 0128-0198; ESSN: 2289-7526

Wan Ab Karim Ghani, Wan Azlina and Mohd Salleh, Mohamad Amran and Adam, Siti Noradzah and Shafri, H. Z. M. and Shaharum, S. N. and Lim, Kean Long and Rubinsin, N. J. and Lam, Hon Loong and Hasan, Azhan and Samsatli, Sheila and Tapia, John Frederick and Khezri, Ramin and Md Jaye, Ida Fahani and Hernandez, Elias Martinez (2019) Sustainable bio-economy that delivers the environment-food-energy-water nexus objectives: the current status in Malaysia. Food and Bioproducts Processing, 118. pp. 167-186. ISSN 0960-3085; ESSN: 1744-3571

Wan Ab Rahman, Wan Baihaqi and Azeman, Nur Hidayah and Kamaruddin, Nur Hasiba and Menon, Susthitha and Shabaneh, Arafat Abdallah Abdelwadod and Mahdi, Mohd Adzir and Mokhtar, Mohd Hadri Hafiz and Arsad, Norhana and A. Bakar, Ahmad Ashrif (2019) Label-free detection of dissolved carbon dioxide utilizing multimode tapered optical fiber coated zinc oxide nanorice. IEEE Access, 7. pp. 4538-4545. ISSN 2169-3536

Wan Ab. Karim Ghani, Wan Azlina and Chan, Yi Herng and Cheah, Kin Wai and How, Bing Shen and Loy, Adrian Chun Minh and Shahbaz, Muhammad and Sing, Haswin Kaur Gurdeep and Yusuf, Nur'aini Raman and Ahmad Shuhaili, Ahmad Fadzil and Yusup, Suzana and Rambli, Jakaria and Kansha, Yasuki (2019) An overview of biomass thermochemical conversion technologies in Malaysia. Science of the Total Environment, 680. pp. 105-123. ISSN 0048-9697; ESSN: 1879-1026

Wan Abdullah, Wan Syakirah and Osman, Miszaina and Ab Kadir, Mohd Zainal Abidin and Verayiah, Renuga (2019) The potential and status of renewable energy development in Malaysia. Energies, 12 (12). art. no. 2437. pp. 1-16. ISSN 1996-1073

Wan Azman, Wan Mohd Fariz and Shamsudin, Rosnah and Hamzah, Azman (2019) Sifat fizikal dan mekanikal batang pokok sagu (metroxylon spp.). In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 17-21).

Wondi, Mohd Hafizz and Shamsudin, Rosnah and Yunus, Robiah (2019) A review of palm mesocarp maceration and separator machine. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 41-43).

Wong, Su Luan and Wan Adnan, Wan Azizun and O. K. Rahmat, Rahmita Wirza and Zakaria, Noor Syamilah and Talib, Zainal Abidin (2019) PrAise: Putra Alternative Assessment. Centre for Academic Development, Malaysia. ISBN 9789679604641

Yaakob, Syamsuri and Che Beson, Mohd Rashidi and Mohamad, Romli and Zan, Zuraidah and Abdul Kadir @ Jaafar, Muhammad Zamzuri and Idrus Sutan Nameh, Sevia Mahdaliza (2019) Characteristics of RoF millimeter-wave generation for 5G system. In: International Symposium on Advanced Electrical and Communication Technologies (ISAECT 2019), 27-29 Nov. 2019, Rome, Italy. .

Yaghoobi, Yousef and Bahiki, Muhammad Rijaluddin and Syaril Azrad (2019) Feature-based stereo vision relative positioning strategy for formation control of unmanned aerial vehicles. International Journal of Innovative Technology and Exploring Engineering, 9 (2). pp. 1613-1617. ISSN 2278-3075

Yahaya, Muhammad Sharil (2019) Transformer asset management based on Markov Prediction Model utilizing health index. Doctoral thesis, Universiti Putra Malaysia.

Yap, Shu Khang and Chin, Nyuk Ling and Yusof, Yus Aniza and Chong, Kar Yeen (2019) Quality characteristics of dehydrated raw Kelulut honey. International Journal of Food Properties, 22 (1). pp. 556-571. ISSN 1094-2912; ESSN: 1532-2386

Yapp, Jong Heng and Raja Ahmad, Raja Kamil and Mahmud, Rozi and Mohtarrudin, Norhafizah and Mohamad Yusof, Loqman and Abdul Rahim, Ezamin and Ahmad, Siti Anom and Abu Bakar @ Zakaria, Md Zuki (2019) Determining weight-bearing tissue condition using peak reactive hyperemia response trend and ultrasonographic features: implications for pressure ulcer prevention. Wound Repair and Regenaration, 27 (3). pp. 225-234. ISSN 1067-1927

Yellappan, Kaviyarasu and Mani, Kulanthayan K.C. and Mohd Tamrin, Shamsul Bahri (2019) Determinants of certified motorcycle helmet use among postal delivery riders at rural areas in Peninsular Malaysia. IATSS Research, 43 (3). pp. 153-160. ISSN 0386-1112

Yen, Lisa Wen Chua and Bee, Lin Chua and Figiel, Adam and Chien, Hwa Chong and Wojdylo, Aneta and Szumny, Antoni and Shean, Thomas Yaw Choong (2019) Antioxidant activity, and volatile and phytosterol contents of Strobilanthes crispus dehydrated using conventional and vacuum microwave drying methods. Molecules, 24 (7). pp. 1-21. ISSN 1420-3049

Yong, Ong Wei and Masuri, Siti Ujila (2019) Computational fluid dynamics analysis on single leak and double leaks subsea pipeline leakage. CFD Letters, 11 (2). pp. 95-107. ISSN 2180-1363

Yousif, Rana Amir and Muniandy, Ratnasamy and Hassim, Salihudin and Mohd Jakarni, Fauzan (2019) Influence of polymer and aged binder on the physical and rheological properties. ARPN Journal of Engineering and Applied Sciences, 14 (8). pp. 1524-1536. ISSN 1819-6608

Youssef, Khaled Ali Ahmed Ben and Abdullah, Ahmad Makmom and Mohd Shafri, Helmi Zulhaidi and Ash'aari, Zulfa Hanan (2019) Evaluation of aerosol optical thickness over Malaysia based on multi-source ground and satellite data. Pertanika Journal of Science & Technology, 27 (4). pp. 1901-1916. ISSN 0128-7680; ESSN: 2231-8526

Yusoff, Atiqah and Azeman, Nur Hidayah and Mohamed Kassim, Muhammad Faizal and Mobarak, Nadhratun Naiim and Badri, Khairiah and Mahdi, Mohd Adzir and Su'ait, Mohd Sukor and A. Bakar, Ahmad Ashrif (2019) Bio-based polycationic polyurethane as an ion-selective membrane for nitrate tapered optical fiber sensors. IEEE Access, 7. pp. 157103-157112. ISSN 2169-3536

Zabaruddin, Nur Haryani and Mohamed, Nor Hasimah and Abdullah, Luqman Chuah and Tamada, Masao and Ueki, Yuji and Seko, Noriaki and Shean, Thomas Yaw Choong (2019) Palm oil-based biodiesel synthesis by radiation-induced kenaf catalyst packed in a continuous flow system. Industrial Crops and Products, 136. pp. 102-109. ISSN 0926-6690

Zainal A'bidin, Farahana Nabilah and Shamsudin, Rosnah and Mohd Basri, Mohd Salahuddin and Mohd Dom, Zanariah (2019) Physical and mechanical properties of unripe Nipah banana fruit (Musa acuminata balbisiana). Pertanika Journal of Science & Technology, 27 (S1). pp. 149-157. ISSN 0128-7680; ESSN: 2231-8526

Zainal A'bidin, Farahana Nabilah and Shamsudin, Rosnah and Mohd Basri, Mohd Salahuddin and Mohd Dom, Zanariah (2019) Some physical properties of mature green Nipah and Nangka banana fruit. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 130-132).

Zainal Abidin, Ahmad Noor Syukri (2019) Determination of risk factors associated with severity level of motorcycle–passenger car crashes. Masters thesis, Universiti Putra Malaysia.

Zainal Abidin, Ahmad Noor Syukri and Wing, Kak D. and Osman, Mohd Rasid and Wong, Shaw Voon (2019) Effects of shelf age based on types of approval marking on passenger car tyres' safety performance. Journal of the Society of Automotive Engineers Malaysia, 3 (4 spec.). pp. 64-75. ISSN 2600-8092; ESSN: 2550-2239

Zainal Abidin, Zurina and Madehi, Norhafizah and Yunus, Robiah and Derahman, Aishah (2019) Effect of storage conditions on Jatropha curcas performance as biocoagulant for treating palm oil mill effluent. Journal of Environmental Science and Technology, 12 (2). pp. 92-101. ISSN 1994-7887; ESSN: 2077-2181

Zaini, Nur Hazirah (2019) Lightning performance analysis of a grid-connected solar photovoltaic system. Doctoral thesis, Universiti Putra Malaysia.

Zaini, Nur Hazirah and Ab Kadir, Mohd Zainal Abidin and Mohd Radzi, Mohd Amran and Azis, Norhafiz and Ahmad, Nor Izzati and Mohd Nasir, Mohd Solehin and Izadi, Mahdi and Ab Aziz, Nur Fadilah and Ali, Zaipatimah (2019) Lightning surge on the DC and AC side of solar PV system. In: 11th Asia-Pacific International Conference on Lightning (APL 2019), 12-14 June 2019, Hong Kong, China. .

Zainol Abidin, Nadiah Husseini and Abu Bakar, Muhammad Hafiz and Mahdi, Mohd Adzir (2019) Hybrid raman-erbium random fiber laser with symmetrical combined pumping of 1455 nm and 1497 nm wavelengths. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 6 (12). art. no. spec.. pp. 72-75. ISSN 2458-9403

Zainol Abidin, Nadiah Husseini and Abu Bakar, Muhammad Hafiz and Mustapha Kamil, Yasmin and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2019) Open cavity hybrid Raman-erbium random fiber laser with common pump. IEEE Access, 7. pp. 85867-85874. ISSN 2169-3536

Zainol Abidin, Nadiah Husseini and Lau, Kuen Yao and Abu Bakar, Muhammad Hafiz and Tamchek, Nizam and Mahdi, Mohd Adzir (2019) Open cavity controllable dual-wavelength hybrid Raman-erbium random fiber laser. IEEE Photonics Journal, 11 (4). pp. 1-9. ISSN 1943-0655; ESSN: 1943-0647

Zainuddin, Nurul Hida (2019) Sensitive Leptospira DNA detection using tapered optical fiber sensor coated with carbon quantum dots. Doctoral thesis, Universiti Putra Malaysia.

Zainuddin, Suraya and Abdul Rashid, Nur Emileen and Ibrahim, Idnin Pasya and Raja Abdullah, Raja Syamsul Azmir (2019) Simulation of multi-band MIMO FMCW radar performance in detecting maritime vessels. In: 2019 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET), 23-24 Oct. 2019, Tangerang, Indonesia. (pp. 113-117).

Zainuddin, Suraya and Pasya, Idnin and Abd. Rashid, Nur Emileen and Zaiaami, Nadiy and Maryam, Asiah and Raja Abdullah, Raja Syamsul Azmir and Megat Ali, Megat Syahirul Amin (2019) Maritime radar: a review on techniques for small vessels detection. International Journal of Electrical & Electronic Systems Research, 14 (1). pp. 1-16. ISSN 1985-5389

Zakaria, Noor Syamilah and Saripan, M. Iqbal and Ismail, Alyani and Subarimaniam, Neerushah (2019) Play and fun in learning ethics education. In: 5th International Conference on Educational Research and Practice (ICERP) 2019, 22-23 Oct. 2019, Palm Garden Hotel, Putrajaya, Malaysia. (pp. 641-646).

Zakaria, Noor Syamilah and Subarimaniam, Neerushah and Wan Jaafar, Wan Marzuki and Mohd Ayub, Ahmad Fauzi and Saripan, M. Iqbal (2019) On becoming ethical counselors: measuring counseling ethics competency. In: 5th International Conference on Educational Research and Practice (ICERP) 2019, 22-23 Oct. 2019, Palm Garden Hotel, Putrajaya, Malaysia. (pp. 647-652).

Zakaria, Nur Zuriati and Mohd Nor, Mohd Zuhair (2019) Characteristics of powders produced from different parts of sweet potato. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 91-93).

Zakaria, Siti Maisurah (2019) Evaluation on subcritical water extraction of phenolic compounds from Chlorella sp. Microalgae. Doctoral thesis, Universiti Putra Malaysia.

Zakaria @ Ya, Muta Harah and Mohd Sharef, Nurfadhlina and Abdul Rani, Mohd Zariat and Wong, Su Luan and Saripan, M. Iqbal (2019) UPM academic transformation. UPM Press, MALAYSIA. ISBN 9789679604603

Zakuan Azmi, Mazidah Mior and Taip, Farah Saleena and Mustapa Kamal, Siti Mazlina and Chin, Nyuk Ling (2019) Effects of temperature and time on the physical characteristics of moist cakes baked in air fryer. Journal of Food Science and Technology, 56 (10). pp. 4616-4624. ISSN 0022-1155; ESSN: 0975-8402

Zaludin, Zairil Azhar (2019) Concept paper: why managing universities like entrepreneurs will solve financial problems in institutions of higher learning. International Journal of Academic Research in Business and Social Sciences, 9 (7). pp. 805-812. ISSN 2222-6990

Zaludin, Zairil Azhar and Derasol, Kamariah (2019) Concept paper: kaizen principles in aerospace education. International Journal of Academic Research in Business and Social Sciences, 9 (2). pp. 910-918. ISSN 2222-6990

Zaludin, Zairil Azhar and Gires, Ezanee (2019) Automatic flight control requirements for transition flight phases when converting long endurance fixed wing UAV to VTOL aircraft. In: 2019 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2019), 29 June 2019, Shah Alam, Selangor, Malaysia. (pp. 273-278).

Zaludin, Zairil Azhar and Mohd Harithuddin, Ahmad Salahuddin (2019) Challenges and trends of changing from hover to forward flight for a converted hybrid fixed wing VTOL UAS from automatic flight control system perspective. In: 2019 IEEE 9th International Conference on System Engineering and Technology (ICSET 2019), 7 Oct. 2019, Shah Alam, Selangor, Malaysia. (pp. 247-252).

Zeggar, Mohamed Lamine and Noor Azline and Safiee, N. Azizi (2019) Fly ash as supplementary material in concrete: a review. IOP Conference Series: Earth and Environmental Science, 357. pp. 1-11. ISSN 1755-1307; ESSN: 1755-1315

Zentou, Hamid and Zainal Abidin, Zurina and Yunus, Robiah and Awang Biak, Dayang Radiah and Korelskiy, Danil (2019) Overview of alternative ethanol removal techniques for enhancing bioethanol recovery from fermentation broth. Processes, 7 (7). art. no. 458. pp. 1-16. ISSN 2227-9717

Zentou, Hamid and Zainal Abidin, Zurina and Yunus, Robiah and Awang Biak, Dayang Radiah and Zouanti, Mustapha and Abdelkader, Hassani (2019) Modelling of molasses fermentation for bioethanol production: a comparative investigation of Monod and Andrews models accuracy assessment. Biomolecules, 9 (8). art. no. 308. pp. 1-11. ISSN 2218-273X

Zghaibi, Nour and Omar, Rozita and Mustapa Kamal, Siti Mazlina and Awang Biak, Dayang Radiah and Harun, Mohd Razif (2019) Microwave-assisted brine extraction for enhancement of the quantity and quality of lipid production from microalgae Nannochloropsis sp. Molecules, 24 (19). pp. 1-21. ISSN 1420-3049

Zghaibi, Nour A. T. (2019) Microwave-assisted extraction of lipid from Nannochloropsis sp. microalgae using brine solution. Doctoral thesis, Universiti Putra Malaysia.

Zin, Mohd Hanafee and Abdan, Khalina and Mazlan, Norkhairunnisa and Zainudin, Edi Syams and Liew, Kan Ern (2019) The effect of different linear robot travel speed on mass flowrate of pineapple leaf fibre (PALF) automated spray up composite. Composites Part B: Engineering, 156 (1). pp. 220-228. ISSN 1879-1069

Zin, Mohd Hanafee and Abdan, Khalina and Mazlan, Norkhairunnisa and Zainudin, Edi Syams and Liew, Kan Ern and Norizan, Mohd Nurazzi (2019) Automated spray up process for pineapple leaf fibre hybrid biocomposites. Composites Part B: Engineering, 177. pp. 1-9. ISSN 1359-8368; ESSN: 1879-1069

Zulkifli, Mohd Zamani and Lau, Kuen Yao and Muhammad, Farah Diana and Yasin, Moh (2019) Dual-mode output in half open cavity random fibre laser. Optics Communications, 430. pp. 273-277. ISSN 0030-4018

Zulkifli, Norzima and Thevendram, Kausalyah (2019) Improvisation of non-conformance management in a small aerospace manufacturing industry. Journal of Mechanical Engineering Research and Developments, 42 (5). pp. 190-193. ISSN 1024-1752

Zulkifli, Nurul Ainina and Mohd Nor, Mohd Zuhair and Mokhtar, Mohd Noriznan and Sulaiman, Alifdalino (2019) Strategies for sustainable production of starch from sweet potato. In: Konvensyen Kebangsaan Kejuruteraan Pertanian dan Makanan 2019, 21 Mac 2019, Wisma Tani, Kementerian Pertanian & Industri Asas Tani, Putrajaya. (pp. 133-136).

Zulkipli, Nor Akhlisah (2019) Synthesis of levulinic acid from oil palm mesocarp fiber by acid hydrolysis. Masters thesis, Universiti Putra Malaysia.

Zyoud, Ahed H. and Abdelhadi, Doa' H. and Helal, Mohamed H.S. and Zyoud, Samer H. and Bsharat, Heba and Abu-Alrob, Sohaib M. and Sabli, Nordin and Qamhieh, Naser and Hajamohideen, Abdul Razack and Hilala, Hikmat S. (2019) Enhancement of electromagnetically deposited pristine CdTe film electrode photoelectrochemical characteristics by annealing temperature and cooling rate. Optik, 197. pp. 1-11. ISSN 0030-4026; ESSN: 1618-1336

This list was generated on Thu Nov 21 23:56:46 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0