Items where Division is "Faculty of Engineering" and Year is 2015

Group by: Creators | Item Type | No Grouping

Number of items: 798.

Article

A., Bahrami and A. R., Sadrolhosseini and G., Mamdoohi and K., Bahzad (2015) Surface plasmon sensor based on polyprrole multiwallet carbon nanotube composite layer to detect AI (III) in aqueous solution. Digest Journal of Nanomaterials and Biostructures, 10 (2). pp. 535-541. ISSN ESSN: 1842-3582

A. A. Al Sharif, Abubakr and Pradhan, Biswajeet and Mansor, Shattri and Mohd Shafri, Helmi (2015) Urban expansion assessment by using remotely sensed data and the relative Shannon entropy model in GIS: a case study of Tripoli, Libya. International Journal of Theoretical and Empirical Researches in Urban Management, 10 (1). pp. 55-71. ISSN 2065-3913; ESSN: 2065-3921

A. Talib, Rosnita and Mohamed @ Asa'ari, Ainun Zuriyati and Abdul Rahman, Russly and Ibrahim, Rushdan (2015) Linerboard made from soda-anthraquinone (Soda-AQ) treated coconut coir fiber and effect of pulp beating. BioResources, 10 (4). pp. 6975-6992. ISSN 1930-2126

A.M.A, Ahmed and Ali, Salmiaton and Choong, Thomas Shean Yaw and Wan Ab. Karim Ghani, Wan Azlina (2015) Review of kinetic and equilibrium concepts for biomass tar modeling by using Aspen Plus. Renewable and Sustainable Energy Reviews, 52. pp. 1623-1644. ISSN 1364-0321; ESSN: 1879-0690

Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Azis, Norhafiz and Rameli, Norhidayu and Izadi, Mahdi and Md Arshad @ Hashim, Syahrun Nizam (2015) Consideration of lightning current along a tall structure in the presence of horizontal arrangement grounding. Applied Mechanics and Materials, 793. pp. 34-38. ISSN 1660-9336

Abas, Siti Nur Aeisyah and Ismail, Mohd Halim Shah and Siajam, Shamsul Izhar and Kamal, Md Lias (2015) Adsorption of Pb(II) ions by using Mangrove-Alginate Composite Beads (MACB): isotherm, kinetics & thermodynamics studies. Journal of Purity, Utility Reaction and Environment, 4 (3). pp. 124-131. ISSN 2314-8101; ESSN: 2232-1179

Abas, Siti Nur Aeisyah and Ismail, Mohd Halim Shah and Siajam, Shamsul Izhar and Kamal, Md Lias (2015) Development of novel adsorbent-mangrove-alginate composite bead (MACB) for removal of Pb(II) from aqueous solution. Journal of the Taiwan Institute of Chemical Engineers, 50. pp. 182-189. ISSN 1876-1070; ESSN: 1876-1089

Abas, Siti Nur Aeisyah and Ismail, Mohd. Halim Shah and Siajam, Shamsul Izhar and Kamal, Md Lias (2015) Comparative study on adsorption of PB(II) ions by alginate beads & mangrove-alginate composite beads. Advanced Materials Research - Material Science Technology & Global Sustainability, 1113. pp. 248-254. ISSN 1022-6680; ESSN: 1662-8985

Abboud, Anas A. and O. K. Rahmat, Rahmita Wirza and Kadiman, Suhaini and Dimon, Mohd Zamrin and Abdullah, Lili Nurliyana and Saripan, M. Iqbal and Khaleel, Hasan Hadi (2015) Automatic detection of the end-diastolic and end-systolic from 4D echocardiographics images. Journal of Computer Science, 11 (1). pp. 230-240. ISSN 1549-3636; ESSN: 1552-6607

Abd Rahman, Muhammad Syahmi and Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin (2015) The electrical behaviour of polymer insulator under different weather conditions. Applied Mechanics and Materials, 793. pp. 60-64. ISSN 1660-9336; ESSN: 1662-7482

Abd. Karim, Izian and Abd Aziz, Farah Nora Aznieta and Law, Teik Hua and Mohammed, Kachalla (2015) Continuous RC slab flexural limit state optimization from slab depth consideration. International Journal of Applied Engineering Research, 10 (13). pp. 33430-33437. ISSN 0973-9769; ESSN: 0973-4562

Abdollahi, Yadollah and Sairi, Nor Asrina and Mohd Said, Suhana and Abouzari-lotf, Ebrahim and Zakaria, Azmi and Mohd Sabri, Mohd Faizul and Islam, Aminul and Alias, Yatimah (2015) Scheduling the blended solution as industrial CO2 absorber in separation process by back-propagation artificial neural networks. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 150. pp. 892-901. ISSN 1386-1425; ESSN: 1873-3557

Abdul Aziz, Faieza and Nawawi, A. M. and Hamzeh, S. R. and Rohidatun, M. W. and Ahmad, Siti Azfanizam (2015) Responsiveness of reconfigurable manufacturing system (RMS) scheduling decision to system performance. Australian Journal of Basic and Applied Sciences, 9 (30). pp. 74-78. ISSN 1991-8178; ESSN: 2309-8414

Abdul Aziz, Faieza and S., Shahul (2015) The effect of crashworthiness parameters for vehicle body. International Journal of Advance Research In Science And Engineering, 4 (1). pp. 1-6. ISSN 2319-8346; ESSN: 2319 - 8354

Abdul Aziz, Nuraini and Zulkifli, Norzima and A. Hamid, Amar Ridzuan (2015) Crash analysis of racing car nose cone subjected to full frontal impact. Jurnal Teknologi (Sciences & Engineering), 75 (8). pp. 49-52. ISSN 2180-3722

Abdul Karim Shah, Nor Nadiah and Shamsuddin, Rosnah and Abdul Rahman, Russly and Mohd Adzahan, Noranizan (2015) Effects of physicochemical characteristics of pummelo fruit juice towards UV inactivation of Salmonella typhimurium. Agriculture and Agricultural Science Procedia, 2. pp. 43-52. ISSN 2210-7843

Abdul Raheem and S., Sivasangar and Wan Ab. Karim Ghani, Wan Azlina and Yap, Taufiq Yun Hin and Danquah, Michael K. and Harun, Mohd Razif (2015) Thermogravimetric study of Chlorella vulgaris for syngas production. Algal Research, 12. pp. 52-59. ISSN 2211-9264

Abdul Raheem and Wan Ab. Karim Ghani, Wan Azlina and Yap, Taufiq Yun Hin and Danquah, Michael K. and Harun, Mohd Razif (2015) Thermochemical conversion of microalgal biomass for biofuel production. Renewable and Sustainable Energy Reviews, 49. pp. 990-999. ISSN 1364-0321; ESSN: 1879-0690

Abdul Rahman, Mohammad Hariz and Wan Ab. Karim Ghani, Wan Azlina and Mail, Mohd Fazly and Zain Zawawi, Norziana and Mohd Daud, Mohd Ridzuan and Sadi, Tosiah and Abu Bakar, Nurul Ain (2015) Local practices for production of rice husk biochar and coconut shell biochar: production methods, product characteristics, nutrient and field water holding capacity. Journal of Tropical Agriculture and Food Science, 43 (1). pp. 91-101. ISSN 1394-9829; ESSN: 2289-9650

Abdul Rani, Rohazrin and Mohd Rafie, Azmin Shakrine and Zahari, Rizal and Ahmad, Mohamed Tarmizi (2015) Effects of different cross-section shapes on bending and weight of harvesting pole by using finite element analysis. Journal of Tropical Agriculture and Food Science, 43 (2). pp. 191-201. ISSN 1394-9829; ESSN: 2289-9650

Abdul Razak, Mohd Farhan and Pin, Kar Yong and Md Shah, Zamree and Abdullah, Luqman Chuah and Mahmud, Nazira (2015) Optimisation of solid liquid extraction of Orthosiphon stamineus leaves using response surface methodology technique. Pertanika Journal of Tropical Agricultural Science, 38 (2). pp. 259-270. ISSN 1511-3701; ESSN: 2231-8542

Abdul Razak, Nurul Nadhirah and Abdullah, Norhafizah and Awang Biak, Dayang Radiah and Mohd Yatim, Abdul Rashid (2015) Solvent-less approach for the recovery of palm-based sophorolipids biosurfactant via salting-out method. Journal of Oil Palm Research, 27 (2). pp. 181-189. ISSN 1511-2780; ESSN: 2811-4701

Abdulhasan, Muntadher Qasim and Salman, Mustafa Ismael and Ng, Chee Kyun and Noordin, Nor Kamariah and Hashim, Shaiful Jahari and Hashim, Fazirulhisham (2015) An adaptive threshold feedback compression scheme based on channel quality indicator (CQI) in long term evolution (LTE) system. Wireless Personal Communications, 82 (4). pp. 2323-2349. ISSN 0929-6212; ESSN: 1572-834X

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin (2015) Roundness error evaluation of cold embossed hole based on profile measurement technique. International Journal of Advanced Manufacturing Technology, 80 (1-4). pp. 293-300. ISSN 0268-3768; ESSN: 1433-3015

Abdullah, Ermira Junita and Abang Abdul Majid, Dayang Laila and Romli, Fairuz Izzudin and Gaikwad, Priyanka Subhash and Lim, Gui Yuan and Harun, Nurul Fareha (2015) Active control of strain in a composite plate using shape memory alloy actuators. International Journal of Mechanics and Materials in Design, 11 (1). pp. 25-39. ISSN 1569-1713; ESSN: 1573-8841

Abdullah, Mohd Naim and Mustapha, F. and Muda, M. K. H. and Arrifin, M. K. A. and Rafie, A. S. M. and Shamsudin, M. A. (2015) Simulating bio-composite cycling helmet performance through FEA and CFD approaches. Movement, Health & Exercise, 4 (1). pp. 77-91. ISSN 2231-9409; ESSN: 2289-9510

Abdullahi, Saleh and Pradhan, Biswajeet and Jebur, Mustafa Neamah (2015) GIS-based sustainable city compactness assessment using integration of MCDM, Bayes theorem and RADAR technology. Geocarto International, 30 (4). pp. 365-387. ISSN 1010-6049; ESSN: 1752-0762

Abdulsalam, Alrowaished and Idris, Azni and Mohammad, Thamer A. and Ahsan, Amimul (2015) The development and applications of solar pond: a review. Desalination and Water Treatment, 53 (9). pp. 2437-2449. ISSN 1944-3994; ESSN: 1944-3986

Abid Muslim, Farah Kamil and Tang, Sai Hong and Khaksar, Weria and Zulkifli, Norzima and Ahmad, Siti Azfanizam (2015) A review on motion planning and obstacle avoidance approaches in dynamic environments. Advances in Robotics & Automation, 4 (2). pp. 1-8. ISSN 2168-9695

Abu, Mohd Azlan and Harun, Harlisya and Harmin, Mohammad Yazdi and Abdul Wahab, Noor Izzri (2015) Power consumption optimization technique in ACS for space time trellis code viterbi decoder. Applied Mechanics and Materials, 785. pp. 734-738. ISSN 1660-9336; ESSN: 1662-7482

Abu Bakar, Nurfatimah and Ching, Yern Chee and Abdullah, Luqman Chuah and Ratnam, Chantara Thevy and Ibrahim, Nor Azowa (2015) Thermal and dynamic mechanical properties of grafted kenaf filled poly (vinyl chloride)/ethylene vinyl acetate composites. Materials and Design, 65. pp. 204-211. ISSN 0264-1275; ESSN: 1873-4197

Abu Hassan, Norhasmillah and Puah, Chiew Wei and Ibrahim, Nor Azowa and Samsu Baharuddin, Azhari and Choo, Yuen May (2015) Composting of oil palm biomass: Fourier transform-infrared and thermogravimetry analyses. Journal of Oil Palm Research, 27 (3). pp. 241-249. ISSN 1511-2780

Abu Mansor, Siti Marhainis and Abd. Aziz, Nuraini and Mohamed Ariff, Azmah Hanim and Sahari, Barkawi (2015) Axial crushing of thin-walled structure with crease lines. Australian Journal of Basic and Applied Sciences, 9 (19). pp. 20-26. ISSN 1991-8178

Adeoye, Peter Aderemi and Che Man, Hasfalina and Mohd Soom, Mohd Amin and Mohamed, Thamer Ahmed and Oluwakunmi, Akinbile Christopher (2015) Poultry waste generation, management and the environment: a case of Minna, North Central Nigeria. The Journal of Solid Waste Technology and Management, 41 (2). pp. 146-156. ISSN 1088-1697

Ahadi, Mojtaba and Isa, Maryam and Saripan, M. Iqbal and Wan Hasan, Wan Zuha (2015) Three dimensions localization of tumors in confocal microwave imaging for breast cancer detection. Microwave and Optical Technology Letters, 57 (12). pp. 2917-2929. ISSN 0895-2477; ESSN: 1098-2760

Ahadi, Mojtaba and Mohd Isa, Maryam and Saripan, M. Iqbal and Wan Hasan, Wan Zuha (2015) Square monopole antenna for microwave imaging, design and characterisation. IET Microwaves, Antennas and Propagation, 9 (1). pp. 49-57. ISSN 1751-8725; ESSN: 1751-8733

Ahmad, Mohd Azwan and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Mohammad, Abdul Wahab (2015) Overview on application of Response Surface Methodology (RSM) in treatment of Palm Oil Mill Effluent (POME). Journal of Environmental Science and Engineering B, 4 (3). pp. 111-118. ISSN 2162-5263; ESSN: 2162-5271

Ahmad, Siti Azfanizam and Ang, Mei Choo and Ng, Kok Weng and Abdul Wahab, Amelia Natasya (2015) Reducing home energy usage based on TRIZ concept. Advances in Environmental Biology, 9 (spec.1). pp. 6-11. ISSN 1995-0756; ESSN: 1998-1066

Ahmad Zawawi, Azita and Masami, Shiba and Naim Jemali, Nor Janatun (2015) Accuracy of LiDAR-based tree height estimation and crown recognition in a subtropical evergreen broad-leaved forest in Okinawa, Japan. Forest Systems, 24 (1). pp. 1-11. ISSN 2171-5068; ESSN: 2171-9845

Ahmed, Shakil and Samsudin, Khairulmizam and Ramli, Abdul Rahman and Rokhani, Fakhrul Zaman (2015) Advanced encryption standard-XTS implementation in field programmable gate array hardware. Security and Communication Networks, 8 (3). pp. 516-522. ISSN 1939-0122

Ahmed Ali, Basheer Ahmed and Salit, Mohd Sapuan and Zainudin, Edi Syams and Othman, Mohamed (2015) Implementation of the expert decision system for environmental assessment in composite materials selection for automotive components. Journal of Cleaner Production, 107. pp. 557-567. ISSN 0959-6526; ESSN: 1879-1786

Ahmed Ali, Basheer Ahmed and Salit, Mohd Sapuan and Zainudin, Edi Syams and Othman, Mohamed (2015) Integration of artificial neural network and expert system for material classification of natural fibre reinforced polymer composites. American Journal of Applied Sciences, 12 (3). pp. 174-184. ISSN 1546-9239; ESSN: 1554-3641

Ahmedov, Anvarjon and Rasedee, Ahmad Fadly Nurullah (2015) On the weak localization principle of the eigenfunction expansions of the Laplace-Beltrami operator by Riesz method. Malaysian Journal of Mathematical Sciences, 9 (2). pp. 337-348. ISSN 1823-8343; ESSN: 2289-750X

Ahsan, Amimul and Aziz, Mohammad Gulzarul and Kamal, Md. Rowshon and Idrus, Syazwani and Alamgir, M. and Imteaz, Monzur and Shams, Shahriar (2015) Municipal solid waste generation, composition and management: issues and challenges. a case study. Environment Protection Engineering, 41 (3). pp. 43-59. ISSN 0324-8828

Al-Anbari, Saud and Abdan, Khalina and Alnuaimi, Ali and A., Normariah and Yahya, Azmi (2015) Risk assessment of safety and health (RASH) for building construction. Process Safety and Environment Protection, 94. pp. 149-158. ISSN 0957-5820; ESSN: 1744-3598

Al-Boeridi, Omar N. and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Koh, S. P. (2015) A scalable hybrid decision system (HDS) for Roman word recognition using ANN SVM: Study case on Malay word recognition. Neural Computing & Applications, 26 (6). pp. 1505-1513. ISSN 0941-0643; ESSN: 1433-3058

Al-Dabbagh, Mohanad Dawood and Al-Dabbagh, Rawaa Dawoud and Raja Abdullah, Raja Syamsul Azmir and Hashim, Fazirulhisyam (2015) A new modified differential evolution algorithm scheme-based linear frequency modulation radar signal de-noising. Engineering Optimization, 47 (6). pp. 771-787. ISSN 0305-215X; ESSN: 1029-0273

Al-Jumaily, Abdulmajeed Hammadi Jasim and Sali, Aduwati and Jit Singh, Mandeep Singh and Ismail, Alyani (2015) Propagation measurement on earth-sky signal effects for high speed train satellite channel in tropical region at Ku-band. International Journal of Antennas and Propagation, 2015. art. no. 270949. pp. 1-10. ISSN 1687-5869; ESSN: 1687-5877

Al-Khaled, Al-Fadhl Yahya Khaled and Abd Aziz, Samsuzana and Rokhani, Fakhrul Zaman (2015) Capacitive sensor probe to assess frying oil degradation. Information Processing in Agriculture, 2 (2). pp. 142-148. ISSN 2214-3173

Al-Maqri, Mohammed A. and Othman, Mohamed and Mohd Ali, Borhanuddin and Mohd Hanapi, Zurina (2015) Providing dynamic TXOP for QoS support of video transmission in IEEE 802.11e WLANs. Journal of Networks, 10 (9). pp. 501-511. ISSN 1796-2056

Al-Masri, Ahmed Naufal A. and Ab Kadir, Mohd Zainal Abidin and Hizam, Hashim and Mariun, Norman (2015) Simulation of an adaptive artificial neural network for power system security enhancement including control action. Applied Soft Computing, 29. pp. 1-11. ISSN 1568-4946; ESSN: 1872-9681

Al-Ogaidi, Ahmed A. M. and Wayayok, Aimrun and Kamal, Md. Rowshon and Abdullah, Ahmed Fikri (2015) A modified empirical model for estimating the wetted zone dimensions under drip irrigation. Jurnal Teknologi, 76 (15). pp. 69-73. ISSN 0127–9696; ESSN: 2180–3722

Al-Ogaili, Ali Saadon and Aris, Ishak and Maghami, Mohammad Reza and Othman, Mohammad Lutfi and Azis, Norhafiz (2015) Third harmonic injection feedback to input technique for input current improvement in phase bridge rectifier. Journal of Electrical Systems, 5 (1). pp. 1-10. ISSN 1112-5209

Al-Oqla, Faris M. and S., M. Sapuan and Ishak, M. R. and A. A., Nuraini (2015) Decision making model for optimal reinforcement condition of natural fiber composites. Fibers and Polymers, 16 (1). pp. 153-163. ISSN 1229-9197; ESSN: 1875-0052

Al-Oqla, Faris M. and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Abd. Aziz, Nuraini (2015) A novel evaluation tool for enhancing the selection of natural fibres for polymeric composites based on fiber moisture content criterion. BioResources, 10 (1). pp. 299-312. ISSN 1930-2126

Al-Oqla, Faris M. and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Abdul Aziz, Nuraini (2015) Selecting natural fibres for bio-based materials with conflicting criteria. American Journal of Applied Sciences, 12 (1). pp. 64-71. ISSN 1546-9239; ESSN: 1554-3641

Al-Oqla, Faris M. and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Abdul Aziz, Nuraini (2015) A model for evaluating and determining the most appropriate polymer matrix type for natural fiber composites. International Journal of Polymer Analysis and Characterization, 20 (3). pp. 191-205. ISSN 1023-666X; ESSN: 1563-5341

Al-Oqla, Faris M. and Sapuan, S. M. and Ishak, Mohamad Ridzwan and Abd. Aziz, Nuraini (2015) Predicting the potential of agro waste fibers for sustainable automotive industry using a decision making model. Computers and Electronics in Agriculture, 113. pp. 116-127. ISSN 0168-1699; ESSN: 1872-7107

Al-Qazwini, Yusser A. Taqi and Muhammad Noor, Ahmad Shukri and Yaacob, Mohd. Hanif and Harun, Sulaiman Wadi and Mahdi, Mohd Adzir (2015) Fabrication and characterization of a refractive index sensor based on SPR in an etched plastic optical fiber. Procedia Engineering, 120. pp. 969-974. ISSN 1877-7058

Al-Qazzaz, Noor Kamal and Mohd Ali, Sawal Hamid and Ahmad, Siti Anom and Islam, Mohd Shabiul and Escudero, Javier (2015) Selection of mother wavelet functions for multi-channel EEG signal analysis during a working memory task. Sensors, 15 (11). pp. 29015-29035. ISSN 1424-8220

Al-Saegh, Ali Mohammed and Sali, Aduwati and Jit Singh, Mandeep Singh and Ismail, Alyani (2015) Tracking- and scintillation-aware channel model for GEO satellite to land mobile terminals at Ku-band. International Journal of Antennas and Propagation, 2015. art. no. 392714. pp. 1-15. ISSN 1687-5869; ESSN: 1687-5877

Al-sharif, Abubakr A. A. and Pradhan, Biswajeet (2015) A novel approach for predicting the spatial patterns of urban expansion by combining the chi-squared automatic integration detection decision tree, Markov chain and cellular automata models in GIS. Geocarto International, 30 (8). pp. 858-881. ISSN 1010-6049; ESSN: 1752-0762

Ali, Nasser Hasan and Mohd Ali, Borhanuddin and Basir, Otman and Othman, Mohammad Lutfi and Hashim, Fazirulhisyam (2015) IEC 61850-based WLAN peer-to-peer feeder protection improvement in smart grid substation automation system. Journal of Theoretical and Applied Information Technology, 80 (3). pp. 510-520. ISSN 1992-8645; ESSN: 1817-3195

Ali, Nisreen N. and Mustapha, Faizal and Salit, Mohd Sapuan and Muhammad Rashid, Raizal Saifulnaz (2015) An approach and experimental technique for damage detection of composite panels using PZT sensor. International Journal of Civil and Structural Engineering Research, 3 (1). pp. 29-38. ISSN 2348-7607

Ali, Salmiaton and Danafar, Firoozeh (2015) Controlled-release fertilizers: advances and challenges. Life Science Journal, 12 (11). pp. 33-45. ISSN 1097-8135; ESSN: 2372-613X

Ali, Salmiaton and Mohd Idris, Aida Isma and K. B., Nur Dinie (2015) Mixed plastic wastes Pyrolysis in a fluidized bed reactor for potential diesel production. International Journal of Environmental Science and Development, 6 (8). pp. 606-609. ISSN 2010-0264

Almassri, Ahmed M. and Wan Hasan, Wan Zuha and Ahmad, Siti Anom and Ishak, Asnor Juraiza and Mohamad Ghazali, Aina Mardhiyah and Talib, D. N. and Wada, Chikamune (2015) Pressure sensor: state of art, design, and application for robotic hand. Journal of Sensors, 2015. art. no. 846487. pp. 1-12. ISSN 1687-725X; ESSN: 1687-7268

Alqaisy, Mushtaq and Chakrabraty, Chandan and Ali, Jawad and Alhawari, Adam Reda Hasan (2015) A miniature fractal-based dual-mode dual-band microstrip bandpass filter design. International Journal of Microwave and Wireless Technologies, 7 (2). pp. 127-133. ISSN 1759-0787; ESSN: 1759-0795

Alrazen, Hayder A. and Abu Talib, Abd. Rahim and Ahmad, Kamarul Arifin (2015) A two-component CFD studies of the effects of H2, CNG, and diesel blend on combustion characteristics and emissions of a diesel engine. International Journal of Hydrogen Energy, 41 (24). pp. 10483-10495. ISSN 0360-3199; ESSN: 1879-3487

Alrshah, Mohamed A. and Othman, Mohamed and Mohd Ali, Borhanuddin and Mohd Hanapi, Zurina (2015) Agile-SD: a Linux-based TCP congestion control algorithm for supporting high-speed and short-distance networks. Journal of Network and Computer Applications, 55. pp. 181-190. ISSN 1084-8045; ESSN: 1095-8592

Alsabahi, Hanaa Kadhim and Alkhakani, Ali Jaber and Adam, Nor Mariah and As‘arry, Azizan (2015) Review of potential thermoelectric energy harvesting using Seebeck effect. International Journal of Engineering Research & Technology, 4 (11). art. no. IJERTV4IS110207. pp. 173-177. ISSN 2278-0181

Altaie, Mohamad A. Hasan and Janius, Rimfiel B. and Rashid, Umer and Yap, Yun Hin Taufiq and Yunus, Robiah and Zakaria, Rabitah (2015) Cold flow and fuel properties of methyl oleate and palm-oil methyl ester blends. Fuel, 160. pp. 238-244. ISSN 0016-2361; ESSN: 1873-7153

Althuwaynee, Omar F. and Pradhan, Biswajeet and Ahmad, Noordin (2015) Estimation of rainfall threshold and its use in landslide hazard mapping of Kuala Lumpur metropolitan and surrounding areas. Landslides, 12 (5). pp. 861-875. ISSN 1612-510X; ESSN: 1612-5118

Alwan, Omar Hussein and Wan Hassan, Wan Zuha and Che Soh, Azura and Jaafar, Haslina (2015) An accurate setting for remapping process of foot plantar pressure. Advanced Science, Engineering and Medicine, 7 (10). pp. 872-876. ISSN 2164-6627; ESSN: 2164-6635

Amin, A. F. M. and Rahman, A. I. A. and Salim, S. N. S. and Aris, I. B. and Suliaman, M. S. and Mohamad, R. T. and Zulkefle, A. A. (2015) Cost effective remote monitoring for mini hybrid automation system. International Journal of Applied Engineering Research, 10 (23). pp. 43663-43668. ISSN 0973-4562; ESSN: 0973-9769

Amiri, Ebrahim and Araji, Hamidreza Ahmadzadeh and Wayayok, Aimrun and Rezaei, Mojtaba (2015) Simulation of rice yield under water and salinity stress in Rasht area using AquaCrop model. Jurnal Teknologi, 76 (15). pp. 21-28. ISSN 0127-9696; ESSN: 2180-3722

Amirkhani, Hadi and Yunus, Robiah and Rashid, Umer and Salleh, Shanti Faridah and Awang Biak, Dayang Radiah and Syam, Syafiie (2015) Low-temperature dilute acid hydrolysis of oil palm frond. Chemical Engineering Communications, 202 (9). pp. 1235-1244. ISSN 0098-6445; ESSN: 1563-5201

Anggraini, Vivi and Asadi, Afshin and Huat, Bujang Kim and Nahazanan, Haslinda (2015) Performance of chemically treated natural fibres and lime in soft soil for the utilisation as pile-supported earth platform. International Journal of Geosynthetics and Ground Engineering, 1 (28). pp. 1-14. ISSN 2199-9260; ESSN: 2199-9279

Anggraini, Vivi and Kim Huat, Bujang and Asadi, Afshin and Nahazanan, Haslinda (2015) Effect of coir fibers on the tensile and flexural strength of soft marine clay. Journal of Natural Fibers, 12 (2). pp. 185-200. ISSN 1544-0478; ESSN: 1544-046X

Ariffen, A. M. and Ab-Kadir, Mohd. Zainal A. and Gomes, C. and Jasni, J. (2015) The influence of a curved on copper-type down conductor. Jurnal Teknologi, 72 (5). 63 - 70. ISSN 0127–9696; ESSN: 2180–3722

Arigbabu, Olasimbo Ayodeji and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Wan Adnan, Wan Azizun and Yussof, Salman (2015) Recent advances in facial soft biometrics. The Visual Computer, 31 (5). pp. 513-525. ISSN 0178-2789; ESSN: 1432-2315

Arigbabu, Olasimbo Ayodeji and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Wan Adnan, Wan Azizun and Yussof, Salman and Mahmood, Saif (2015) Soft biometrics: gender recognition from unconstrained face images using local feature descriptor. Journal of Information and Communication Technology, 14. pp. 111-122. ISSN 1675-414X; ESSN: 2180-3862

Arshad, S. N. M. and Abd. kadir, Mohd. Zainal Abidin and Izadi, Mahdi and Ariffen, A. M. and Hamzah, M. N. and Gomes, Chandima and Jasni, J. and Rameli, N. (2015) Characterization preliminary breakdown in the measured lightning electric fields on Malaysia data. Applied Mechanics and Materials, 793 (1). pp. 19-23. ISSN 1660-9336; ESSN: 1662-7482

Asim, Mohammad and Abdan, Khalina and Jawaid, Mohammad and Nasir, M. and Dashtizadeh, Zahra and Ishak, Mohamad Ridzwan and Hoque, M. Enamul (2015) A review on pineapple leaves fibre and its composites. International Journal of Polymer Science, 950567 (2). pp. 1-19. ISSN 1687-9422; ESSN: 1687-9430

Avazpour, Mohammad Reza and Piltan, Farzin and Mazloom, Mohammad Hadi and Sahamijoo, Amirzubir and Ghiasi, Hootan and Sulaiman, Nasri (2015) Research on first order delays system automation. International Journal of Grid Distribution Computing, 8 (4). pp. 211-224. ISSN 2005-4262; ESSN: 2207-6379

Aw, Aaron Teik Hong and Varatharajoo, Renuganth (2015) Dynamics of a flexible tethered satellite system utilising various materials for coplanar and non-coplanar models. Advances in Space Research, 56 (4). pp. 648-663. ISSN 0273-1177; ESSN: 1879-1948

Aw, Aaron Teik Hong and Varatharajoo, Renuganth and Romli, Fairuz Izzudin (2015) Analytic solutions for Tethered Satellite System (TSS) subject to internal and external torques undergoing a spin-up and spin-down maneuvers. Aircraft Engineering and Aerospace Technology, 87 (6). pp. 514-520. ISSN 0002-2667

Azali, A. and Salit, Mohd Sapuan and Rahman, S. A. and Adam, N. M. and Hasan, M. and Hoque, M. Enamul (2015) Temperature profile of produced gas in oil palm biomass fluidized bed gasifier: effect of fibre/shell composition ratio. Journal of Bioprocessing & Biotechniques, 5 (8). pp. 1-6. ISSN 2155-9821

Azeman, Nur Hidayah and Yusof, Nor Azah and Abdullah, Jaafar and Yunus, Robiah and Hamidon, Mohd Nizar and Hajian, Reza (2015) Study on the spectrophotometric detection of free fatty acids in palm oil utilizing enzymatic reactions. Molecules, 20 (7). pp. 12328-12340. ISSN 1420-3049

Aziz, A. and Lim, Hong Ngee and Girei, S.H and Yaacob, Mohd Hanif and Mahdi, Mohd Adzir and Huang, N. M. and Pandikumar, Alagarsamy (2015) Silver/graphene nanocomposite-modified optical fiber sensor platform for ethanol detection in water medium. Sensors and Actuators B: Chemical, 206. pp. 119-125. ISSN 0925-4005; ESSN: 1873-3077

Babadi, Farahnaz Eghbali and Yunus, Robiah and Abdul Rashid, Suraya and Mohd Salleh, Mohamad Amran and Ali, Salmiaton (2015) New coating formulation for the slow release of urea using a mixture of gypsum and dolomitic limestone. Particuology, 23. pp. 62-67. ISSN 1674-2001; ESSN: 2210-4291

Badmus, Abdurrahman Adeleye and Gauri, Samla and Ali, Nor Ikrami and Gomes, Chandima (2015) Mechanical stability of biobased food packaging material. Food Science and Quality Management, 39. pp. 41-48. ISSN 2224-6088; ESSN: 2225-0557

Baharuddin, Azhari Samsu and Mohammed, Mohd Afandi P. and Mat Lazim, Azwan and Loo, Yu Xiang and Hanipah, Suhaiza Hanim (2015) Microstructural, mechanical, and physicochemical behaviours of alkali pre-treated oil palm stalk fibres. Bioresources, 10 (2). pp. 2783-2796. ISSN 1930-2126

Balavandy, Sepideh Keshan and Shameli, Kamyar and Zainal Abidin, Zurina (2015) Rapid and green synthesis of silver nanoparticles via sodium alginate media. International Journal of Electrochemical Science, 10 (1). pp. 486-497. ISSN 1452-3981

Bashar, Zubairu Usman and Wayayok, Aimrun and M. Amin, M. S. and Mahadi, Mohammad Razif (2015) Single seedling nursery tray: an innovative breakthrough to quality seedling raising technique for SRI transplanting machine. Research Journal of Applied Sciences, Engineering and Technology, 10 (11). pp. 1258-1265. ISSN 2040-7459; ESSN: 2040-7467

Basir, Siti Nora and Yussof, Hanafiah and Zahari, Nur Ismarrubie (2015) Simulation analysis of mimosa pudica main pulvinus towards biological tactile sensing modelling. Procedia Computer Science, 76. pp. 425-429. ISSN 1877-0509

Basir, Siti Nora and Yussof, Hanafiah and Zahari, Nur Ismarrubie (2015) Simulation analysis of mimosa pudica main pulvinus towards biological tactile sensing modeling. Procedia Computer Science, 76. 425 -429. ISSN 1877-0509

Bo, Yuan Lim and Shamsuddin, Rosnah and Baharudin, B. T. Hang Tuah and Yunus, Robiah (2015) A review of processing and machinery for Jatropha curcas L. fruits and seeds in biodiesel production: harvesting, shelling, pretreatment and storage. Renewable and Sustainable Energy Reviews, 52. pp. 991-1002. ISSN 1364-0321; ESSN: 1879-0690

Boon, Khoon Tan and Yern, Chee Ching and Sin, Chew Poh and Chuah, Luqman and Seng, Neon Gan (2015) A review of natural fiber reinforced poly(Vinyl alcohol) based composites: application and opportunity. Polymers, 7 (11). pp. 2205-2222. ISSN 2073-4360

Buang, Nur Salihah and Shamsudin, Rosnah and Ab. Aziz, Norashikin (2015) Mass modeling of Malaysian varieties pomelo fruit (Citrus Grandis L. Osbeck) with some physical characteristics. International Food Research Journal, 22 (2). pp. 488-493. ISSN 1985-4668; ESSN: 2231-7546

Bui, Dieu Tien and Pradhan, Biswajeet and Revhaug, Inge and Nguyen, Duy Ba and Pham, Ha Viet and Bui, Quy Ngoc (2015) A novel hybrid evidential belief function-based fuzzy logic model in spatial prediction of rainfall-induced shallow landslides in the Lang Son city area (Vietnam). Geomatics, Natural Hazards and Risk, 6 (3). pp. 243-271. ISSN 1947-5705; ESSN: 1947-5713

C. B. Man, Hasfalina and Akinbile, Christopher O. and Jun, Chin X. (2015) Coconut husk adsorbent for the removal of methylene blue dye from wastewater. BioResources, 10 (2). pp. 2859-2872. ISSN 1930-2126

C. V., Aravind and Misron, Norhisam and K. M., Suresh and G. P., Ramesh (2015) Assessment on the harnessing of the energy from the back pressure chamber of palm oil mill. Journal of Engineering Science and Technology (Spec. 8). 46 - 56. ISSN 1823-4690

Chamran, Mohammad Kazem and Shafie, Suhaidi (2015) A non-invasive air-coupled v-type ultrasonic leak detection system. Journal of Purity, Utility Reaction and Environment, 4 (3). pp. 99-107. ISSN 2314-8101; ESSN: 2232-1179

Chang, Jing Jing and Syam, Syafiie and Raja Ahmad, Raja Kamil and Lim, Thiam Aun (2015) Automation of anaesthesia: a review on multivariable control. Journal of Clinical Monitoring and Computing, 29 (2). pp. 231-239. ISSN 1387-1307; ESSN: 1573-2614

Chang, Teck Sin and Yunus, Robiah and Rashid, Umer and Choong, Thomas Shean Yaw and Awang Biak, Dayang Radiah and Muhammad Syam, Azhari (2015) Palm oil derived trimethylolpropane triesters synthetic lubricants and usage in industrial metalworking fluid. Journal of Oleo Science, 64 (2). pp. 143-151. ISSN 1345-8957; ESSN: 1347-3352

Chattha, Shakeel Hussain and Che Man, Hasfalina and Mahadi, Muhammad Razif and Mirani, Benish Nawaz and Teang, Shui Lee (2015) Quality change of wheat grain during storage in a ferrocement bin. Journal of Agricultural and Biological Science, 10 (8). pp. 313-323. ISSN 1990-6145

Chattha, Shakeel Hussain and Che Man, Hasfalina and Teang, Shui Lee and Mirani, Benish Nawaz and Mahadi, Muhammad Razif (2015) A study on the quality of wheat grain stored in straw-clay bin. Journal of Biodiversity and Environmental Sciences, 6 (1). pp. 428-437. ISSN 2220-6663; ESSN: 2222-3045

Cheong, Ming Yin and Wiriadidjaja, Surjatin and Abd Majid, Dayang Laila and Romli, Fairuz Izzudin and Mohd Rafie, Azmin Shakrine and Zhahir, Amzari (2015) Review on the cost and performance of a wige craft a commercialization prospective. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10027-10033. ISSN 1819-6608

Chia, Soon Chai and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi (2015) Evaluation of gas pipeline induced voltage associated with parallel transmission line. Applied Mechanics and Materials, 793. pp. 90-94. ISSN 1660-9336; ESSN: 1662-7482

Choo, Chua Poh and Jalaludin, Juliana and Hamedon, Titi Rahmawati and Adam, Nor Mariah (2015) Preschools indoor air quality and respiratory health symptoms among preschoolers in Selangor. Procedia Environmental Sciences, 30. pp. 303-308. ISSN 1878-0296

Chua, Bee Lin and Abdullah, Zunoliza and Pin, Kar Yong and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Yusuf, Umi Kalsom (2015) Isolation, structure elucidation, identification and quantitative analysis of di(2-ethylhexyl) phthalate (DEHP) from the roots of Chlorophytum boriviliuanum (safed musli). Research Journal of Pharmaceutical, Biological and Chemical Sciences, 6 (5). pp. 1090-1095. ISSN 0975-8585

Chua, Poh Choo and Jalaludin, Juliana and Hamedon, Titi Rahmawati and Adam, Nor Mariah (2015) Indoor air quality assessment and lung functions among children in preschool at Selangor, Malaysia. Advances in Environmental Biology, 9 (9). pp. 1-9. ISSN 1995-0756; ESSN: 1998-1066

Chua, Poh Choo and Jalaludin, Juliana and Hamedon, Titi Rahmawati and Adam, Nor Mariah (2015) Preschools’ indoor air quality and respiratory health symptoms among preschoolers in Selangor. Procedia Environmental Sciences, 30. pp. 303-308. ISSN 1878-0296

Dadras, Mohsen and M. Shafri, Helmi Z. and Ahmad, Noordin and Pradhan, Biswajeet and Safarpour, Sahabeh (2015) Spatio-temporal analysis of urban growth from remote sensing data in Bandar Abbas city, Iran. The Egyptian Journal of Remote Sensing and Space Science, 18 (1). pp. 35-52. ISSN 1110-9823; ESSN: 2090-2476

Dawood, Sarmad Daood Salman and Inayatullah, Othman and Samin, Razali (2015) Computational study of the effect of using open isogrids on the natural frequencies of a small satellite structure. Acta Astronautica, 106. pp. 120-138. ISSN 0094-5765; ESSN: 1879-2030

Dehnavi, Alireza and Aghdam, Iman Nasiri and Pradhan, Biswajeet and Morshed Varzandeh, Mohammad Hossein (2015) A new hybrid model using Step-wise Weight Assessment Ratio Analysis (SWARA) technique and Adaptive Neuro-fuzzy Inference System (ANFIS) for regional landslide hazard assessment in Iran. Catena, 135 (2015). pp. 122-148. ISSN 0341-8162; ESSN: 1872-6887

Djojodihardjo, Harijono and Jafari, Mohammad and Wiriadidjaja, Surjatin and Ahmad, Kamarul Arifin (2015) Active Vibration Suppression of an elastic piezoelectric sensor and actuator fitted cantilevered beam configurations as a generic smart composite structure. Composite Structures, 132. pp. 848-863. ISSN 0263-8223; ESSN: 1879-1085

Dlamini, N. S. and Rowshon, M. K. and Saha, Ujjwal and Lai, S. H. and Fikri, A. and Zubaidi, J. (2015) Simulation of future daily rainfall scenario using stochastic rainfall generator for a rice-growing irrigation scheme in Malaysia. Asian Journal of Applied Sciences, 3 (5). pp. 492-506. ISSN 2321-0893

Doljinsuren, Myagmar and Gomes, Chandima (2015) Lightning incidents in Mongolia. Geomatics, Natural Hazards and Risk, 6 (8). pp. 686-701. ISSN 1947-5705; ESSN: 1947-5713

El-Gendy, Nour Sh and Zainal Abidin, Zurina and Abu Amr, Salem S. and Nassar, Hussein N. (2015) Statistical optimization of alginate immobilization process of candida stauntonica strain MY1 for bioethanol production. International Journal of Current Microbiology and Applied Sciences, 4 (3). pp. 397-420. ISSN 2319-7692; ESSN: 2319-7706

Emmanuel, Osaji and Othman, Mohammad Lutfi and Hizam, Hashim and Othman, Muhammad Murtadha (2015) Artificial neural network application in coordination of directional overcurrent protective relays in electrical mesh distribution network. Applied Mechanics and Materials, 785. pp. 48-52. ISSN 1660-9336; ESSN: 1662-7482

Eng, Tong Phuah and Teck, Kim Tang and Yee, Ying Lee and Shean, Thomas Yaw Choong and Chin, Ping Tan and Chin, Ping Tan (2015) Review on the current state of diacylglycerol production using enzymatic approach. Food and Bioprocess Technology, 8 (6). pp. 1169-1186. ISSN 1935-5130; ESSN: 1935-5149

Esmaile, Maher F. and Marhaban, Mohammad H. and Mahmud, Rozi and Saripan, Muhammad I. (2015) Ultrasound thyroid gland volume estimation: a review. Current Medical Imaging Reviews, 11 (2). pp. 85-90. ISSN 1573-4056

Fairuz, A. M. and Salit, Mohd Sapuan and Zainudin, Edi Syams and Jaafar, Che Nor Aiza (2015) The effect of gelation and curing temperatures on mechanical properties of pultruded kenaf fibre reinforced vinyl ester composites. Fibers and Polymers, 16 (12). pp. 2645-2651. ISSN 1229-9197; ESSN: 1875-0052

Fariman, Hessam Jahani and Ahmad, Siti Anom and Marhaban, Mohammad Hamiruce and Ghasab, Mohammad Ali Jan and Chappell, Paul H. (2015) Simple and computationally efficient movement classification approach for EMG-controlled prosthetic hand: ANFIS vs. artificial neural network. Intelligent Automation & Soft Computing, 21 (4). pp. 559-573. ISSN 1079-8587; ESSN: 2326-005X

Fasihnikoutalab, Mohammad Hamed (2015) Olivine for soil stabilization. Pertanika Journal of Scholarly Research Reviews, 1 (1). pp. 18-26. ISSN 2462-2028

Fatchurrohman, Nanang and Sulaiman, Shamsuddin and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2015) Analysis of a metal matrix composites automotive component. International Journal of Automotive and Mechanical Engineering, 11. pp. 2531-2540. ISSN 2229-8649; ESSN: 2180-1606

Garmabdari, Rasoul and Shafie, Suhaidi and Wan Hasan, Wan Zuha and Garmabdari, Alireza (2015) Study on the effectiveness of dual complementary Hall-effect sensors in water flow measurement for reducing magnetic disturbance. Flow Measurement and Instrumentation, 45. pp. 280-287. ISSN 0955-5986; ESSN: 1873-6998

Ghasab, Mohammad Ali Jan and Khamis, Shamsul and Faruq, Mohammad and Fariman, Hessam Jahani (2015) Feature decision-making ant colony optimization system for an automated recognition of plant species. Expert Systems with Applications, 42 (5). pp. 2361-2370. ISSN 0957-4174; ESSN: 1873-6793

Ghavamian, Aidin and Maghami, Mohammad Reza and Dehghan, Shayan and Gomes, Chandima (2015) Concerns of corrosive effects with respect to lightning protection systems. Engineering Failure Analysis, 57. pp. 434-443. ISSN 1350-6307; ESSN: 1873-1961

Ghiyamat, A. and Mohd Shafri, Helmi Zulhaidi and Mahdiraji, G .A. and Ashurov, R. and Mohamed Shariff, Abd Rashid and Mansor, Shattri (2015) Airborne hyperspectral discrimination of tree species with different ages using discrete wavelet transform. International Journal of Remote Sensing, 36 (1). pp. 318-342. ISSN 0143-1161; ESSN: 1366-5901

Ghobadi, Yasser and Pradhan, Biswajeet and M. Shafri, Helmi Z. and Ahmad, Noordin and Kabiri, Keivan (2015) Spatio-temporal remotely sensed data for analysis of the shrinkage and shifting in the Al Hawizeh wetland. Environmental Monitoring & Assessment, 187. art. no. 4156. pp. 1-17. ISSN 0167-6369; ESSN: 1573-2959

Ghobadi, Yasser and Pradhan, Biswajeet and Sayyad, Gholam Abbas and Kabiri, Keivan and Falamarzi, Yashar (2015) Simulation of hydrological processes and effects of engineering projects on the Karkheh River Basin and its wetland using SWAT2009. Quaternary International, 374. pp. 144-153. ISSN 1040-6182; ESSN: 1873-4553

Ghobakhloo, Morteza and Tang, Sai Hong (2015) The business value of information system-enabled e-collaboration capabilities. International Journal of e-collaboration, 11 (1). pp. 22-56. ISSN 1548-3673; ESSN: 1548-3681

Ghobakhloo, Morteza and Tang, Sai Hong and Standing, Craig (2015) B2B e-commerce success among small and medium-size enterprises: a business network perspective. Journal of Organizational and End User Computing, 27 (1). pp. 1-32. ISSN 1546-2234; ESSN: 1546-5012

Gholizadeh, Somayyeh and Leman, Zulkiflle and Baharudin, B. T. Hang Tuah (2015) A review of the application of acoustic emission technique in engineering. Structural Engineering and Mechanics, 54 (6). pp. 1075-1095. ISSN 1225-4568; ESSN: 1598-6217

Girei, S. H. and Shabaneh, A. A. and Lim, Hong Ngee and Huang, Nay Ming and Mahdi, Mohd Adzir and Yaacob, Mohd. Hanif (2015) Absorbance response of graphene oxide coated on tapered multimode optical fiber towards liquid ethanol. Journal of the European Optical Society - Rapid publications, 10 (15019). pp. 1-5. ISSN 1990-2573

Girei, Saad Hayatu and Shabaneh, Arafat Abdallah Abdelwadod and Lim, Hong Ngee and Hamidon, Mohd Nizar and Mahdi, Mohd Adzir and Yaacob, Mohd Hanif (2015) Tapered optical fiber coated with graphene based nanomaterials for measurement of ethanol concentrations in water. Optical Review, 22 (3). pp. 385-392. ISSN 1340-6000; ESSN: 1349-9432

Goh, H. W. and Ali, Salmiaton and Abdullah, Norhafizah and Idris, Azni (2015) Time, temperature and amount of distilled water effects on the purity and yield of bis (2-hydroxyethyl) terephthalate purification system. Bulletin of Chemical Reaction Engineering & Catalysis, 10 (2). pp. 143-154. ISSN 1978-2993

Goh, Zai Peng and Mohd Radzi, Mohd Amran and Hizam, Hashim and Abdul Wahab, Noor Izzri (2015) A simple predictive method of critical flicker detection for human healthy precaution. Mathematical Problems in Engineering, 2015. art. no. 871826. pp. 1-10. ISSN 1024-123X

Gomes, Chandima and Mary, Ahurra Kulyaka (2015) Lightning safety of under-privileged communities around Lake Victoria. Geomatics, Natural Hazards and Risk, 6 (8). pp. 669-685. ISSN 1947-5713; ESSN: 1947-5705

Gomez, Javier Chavarro and Mokhtar, Mohd Noriznan and Sulaiman, Alawi and Baharuddin, Azhari Samsu and Busu, Zainuri (2015) Recovery of residual crude palm oil from the empty fruit bunch spikelets using environmentally friendly process. Separation Science and Technology, 50 (11). pp. 1677-1683. ISSN 0149-6395; ESSN: 1520-5754

Gomez, Javier Chavarro and Mokhtar, Mohd Noriznan and Sulaiman, Alawi and Zakaria, Rabitah and Samsu Baharuddin, Azhari and Busu, Zainuri (2015) Study on residual oil recovery from empty fruit bunch by combination of water and steam process. Journal of Food Process Engineering, 38 (4). pp. 385-394. ISSN 0145-8876; ESSN: 1745-4530

H. Mostafa, Nawras and Z., N. Ismarrubie and Salit, M. Sapuan and H. Sultan, M. T. (2015) The influence of equi-biaxially fabric prestressing on the flexural performance of woven e-glass/polyester reinforced composites. Journal of Composite Materials, 92 (24). pp. 1-9. ISSN 0021-9983; ESSN: 1530-793X

Hainin, Mohd. Rosli and A. Aziz, Md. Maniruzzaman and Feizabadi, Shahab Moeini and Putra Jaya, Ramadhansyah and Abdul Hassan, Norhidayah and Mohd Jakarni, Fauzan (2015) An overall review: modified asphalt binder containing sasobit in warm-mix asphalt technology. Jurnal Teknologi, 73 (4). pp. 1-6. ISSN 0127–9696; ESSN: 2180–3722

Hameed, Hameed Husam and Eshkuvatov, Zainidin K. and Ahmedov, Anvarjon and Nik Long, Nik Mohd Asri (2015) On Newton-Kantorovich method for solving the nonlinear operator equation. Abstract and Applied Analysis, 2015. art. no. 219616. pp. 1-12. ISSN 1085-3375; ESSN: 1687-0409

Hamza, Salem M. and Ahsan, Amimul and Imteaz, Monzur Alam and Rahman, Ataur and Mohamed, Thamer Ahmed and Ghazali, Abdul Halim (2015) Accomplishment and subjectivity of GIS based DRASTIC groundwater vulnerability assessment method: a review. Environmental Earth Sciences, 73 (7). pp. 3063-3076. ISSN 1866-6280; ESSN: 1866-6299

Hamzah, Muhammad Noh and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Md. Arshad, Syahrun Nizam (2015) Unique stroke-multiplicity of positive lightning in Malaysia. Applied Mechanics and Materials, 793. pp. 39-43. ISSN 1660-9336; ESSN: 1662-7482

Hanamoto, T. and Yamada, H. and Toosi, S. and Mailah, N. F. and M., Norhisam (2015) DDPWM-based power conversion system using a matrix converter for an isolated power supply. Journal of the Japan Society of Applied Electromagnetics and Mechanics, 23 (3). pp. 573-578. ISSN 0919-4452; ESSN: 2187-9257

Haoyuan, Hong and Pradhan, Biswajeet and Chong, Xu and Dieu, Tien Bui (2015) Spatial prediction of landslide hazard at the Yihuang area (China) using two-class kernel logistic regression, alternating decision tree and support vector machines. Catena, 133. pp. 266-281. ISSN 0341-8162; ESSN: 1872-6887

Haron, Nuzul Azam and Abdul Rahman, Hamzah and Chen, Wang and Wood, Lincoln C. (2015) Quality function deployment modelling to enhance industrialised building system adoption in housing projects. Total Quality Management and Business Excellence, 26 (7-8). pp. 703-708. ISSN 1478-3363; ESSN: 1478-3371

Harun, Mohd Yusof and Che Yunus, Mohd Azizi and Morad, Noor Azian and Shah Ismail, Mohd Halim (2015) An industry survey on screw press system in palm oil mill: operational data & malfunction issues. Engineering Failure Analysis, 54. pp. 146-149. ISSN 1350-6307; ESSN: 1873-1961

Hashim, Norhashila and Janius, Rimfiel and Zude, Manuela (2015) Effect of water content on backscattering parameters. Australian Journal of Basic and Applied Sciences, 9 (7). pp. 265-268. ISSN 1991-8178

Hassan, Omer Abdalla Alawad and Abdulrahman, Alhozaimy and Jaafar, Mohd Saleh and Noor Abdul Aziz, Farah and Al-Negheimish, Abdulaziz (2015) Blended cement containing high volume ground dune sand and ground granulated blast furnace slag for autoclave concrete industry. Applied Mechanics and Materials, 754-755. pp. 395-399. ISSN 1660-9336; ESSN: 1662-7482

Hee, Choi and Ismail, Mohd Halim Shah and Ahmadun, Fakhrul-Razi and Mohamed Yusoff, Hamdan (2015) Computational fluid dynamic and corrosion study on discharge of pyrotechnic condensed fire suppression aerosol. World Applied Sciences Journal, 33 (11). pp. 1686-1700. ISSN 1818-4952; ESSN: 1991-6426

Hejazi, Farzad and Noorzaei, Jamaloddin and Abang Ali, Abang Abdullah and Jaafar, Mohd Saleh (2015) Seismic analysis of interlocking mortarless hollow block. Challenge Journal of Structural Mechanics, 1 (1). pp. 22-26. ISSN 2149-8024

Hejazi, Farzad and Shoaei, Mohammad Dalili and Jaafar, Mohd Saleh (2015) Effect of viscous dampers on yielding mechanisms of RC structures during earthquake. Earthquakes and Structures, 8 (6). pp. 1499-1528. ISSN 2092-7614; ESSN: 2092-7622

Hejazi, Maryamsadat and Syed Mohamed, Syed Abdul Rahman Al-Haddad and Singh, Yashwant Prasad and Hashim, Shaiful Jahari and Abdul Aziz, Ahmad Fazli (2015) Multiclass support vector machines for classification of ECG data with missing values. Applied Artificial Intelligence, 29 (7). pp. 660-674. ISSN 0883-9514; ESSN: 1087-6545

Hosseini, Soraya and Bayesti, Iman and Marahel, Ehsan and Babadi, Farahnaz Eghbali and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw (2015) Adsorption of carbon dioxide using activated carbon impregnated with Cu promoted by zinc. Journal of theTaiwan Institute of Chemical Engineers, 52. pp. 109-117. ISSN 1876-1070

Hosseini, Soraya and Marahel, Ehsan and Bayesti, Iman and Abbasi, Ali and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw (2015) CO2 adsorption on modified carbon coated monolith: effect of surface modification by using alkaline solutions. Applied Surface Science, 324. pp. 569-575. ISSN 0169-4332; ESSN: 1873-5584

Hozoorbakhsh, Asghar and Ismail, Mohd Idris Shah and Abd. Aziz, Nuraini (2015) A computational analysis of heat transfer and fluid flow in high-speed scanning of laser micro-welding. International Communications in Heat and Mass Transfer, 68. pp. 178-187. ISSN 0735-1933

Ibrahim, Mohd Nordin and Sarker, Md. Sazzat Hossain and Ab. Aziz, Norashikin and Punan, Mohd Salleh (2015) Drying performances and milling quality of rice during industrial fluidized bed drying of paddy in Malaysia. Pertanika Journal of Science & Technology, 23 (2). pp. 297-309. ISSN 0128-7680; ESSN: 2231-8526

Ibrahim @ Ghazali, Siti Azlida and Abdul Rahman, Norizah and Abu Bakar, Muhammad Hafiz and Girei, Saad Hayatu and Yaacob, Mohd Hanif and Ahmad, Harith and Mahdi, Mohd Adzir (2015) Room temperature ammonia sensing using tapered multimode fiber coated with polyaniline nanofibers. Optics Express, 23 (3). pp. 2837-2845. ISSN 1094-4087

Idrees, Mohammed Oludare and Saeidi, Vahideh and Pradhan, Biswajeet and Mohd Shafri, Helmi Zulhaidi (2015) Maximizing urban features extraction from multi-sensor data with Dempster-Shafer theory and HSI data fusion techniques. Asian Journal of Applied Sciences, 3 (2). pp. 218-228. ISSN 2321-0893

Imteaz, Monzur Alam and Paudel, Upendra and Ahsan, Amimul and Santos, Cristina (2015) Climatic and spatial variability of potential rainwater savings for a large coastal city. Resources Conservation and Recycling, 105 (pt. A). pp. 143-147. ISSN 0921-3449; ESSN:1879-0658

Ismail, N. A. and Mohd Adzahan, Noranizan and Shamsudin, Rosnah and Karim, Roselina (2015) Dimension and stackability of cassava (Manihot esculanta Crantz) chips for mass production. International Food Research Journal, 22 (6). pp. 2421-2425. ISSN 1985-4668; ESSN: 2231-7546

Ismail, Zuliana and Varatharajoo, Renuganth and Mohd Ajir, Mohd Ramly and Mohd Rafie, Azmin Shakrine (2015) Enhanced attitude control structure for small satellites with reaction wheels. Aircraft Engineering and Aerospace Technology, 87 (6). pp. 546-550. ISSN 748-8842; ESSN: 1758-4213

Jahanshiri, Ebrahim and Mohamed Shariff, Abdul Rashid and Amiri, Fazel and Mohd Soom, Mohd Amin and Wayayok, Aimrun and Buyonga, Taher and Pradhan, Biswajeet (2015) Spatial soil analysis using geostatistical analysis and map algebra. Arabian Journal of Geosciences, 8 (11). pp. 9775-9788. ISSN 1866-7511; ESSN: 1866-7538

Jebur, Mustafa Neamah and Pradhan, Biswajeet and Mohd Shafri, Helmi Zulhaidi and Md Yusoff, Zainuddin and Tehrany, Mahyat Shafapour (2015) An integrated user-friendly ArcMAP tool for bivariate statistical modeling in geoscience applications. Geoscientific Model Development, 8 (2015). pp. 881-891. ISSN 1991-959X; ESSN: 1991-9603

Kamaruddin, Syahidah and Shamsudin, Rosnah and Mohd Adzahan, Noranizan and Othman, Zaulia and Ahmedov, Anvarjon (2015) Quality changes of fresh cut cantaloupe (Cucumis melo L. var Reticulatus cv. Glamour) in different types of polypropylene packaging. International Food Research Journal, 22 (2). pp. 753-760. ISSN 1985-4668; ESSN: 2231-7546

Kamarudin, Khairul Manami and Ridgwaya, Keith and Hassan, Mohd Roshdi (2015) Modelling the conceptual design process with hybridization of TRIZ methodology and systematic design approach. Procedia Engineering, 131. pp. 1064-1072. ISSN 1877-7058

Kamarudin, Noraziahtulhidayu and Syed Mohamed, Syed Abdul Rahman Al-Haddad and Abushariah, Mohammad A. M. and Hashim, Shaiful Jahari and Hassan Azhari, Abd Rauf (2015) Acoustic echo cancellation using adaptive filtering algorithms for quranic accents (Qiraat) identification. International Journal of Speech Technology, 19 (2). pp. 393-405. ISSN 1381-2416; ESSN: 1572-8110

Kania, Dina and Yunus, Robiah and Omar, Rozita and Abdul Rashid, Suraya and Mohamad Jan, Badrul (2015) A review of biolubricants in drilling fluids: recent research, performance, and applications. Journal of Petroleum Science and Engineering, 135. pp. 177-184. ISSN 0920-4105

Karuppuchamy, Subbian and Yoshito, Andou and Baharuddin, Azhari Samsu and Sulaiman, Alawi and Hassan, Mohd Ali and Nishida, Haruo and Shirai, Yoshihito (2015) Thermo-mechanical properties of palm fiber plastic (PFP) composites. Advanced Science, Engineering and Medicine, 7 (10). pp. 844-848. ISSN 2164-6627; ESSN: 2164-6635

Katim, N. I. A. and Ishak, M. T. and Ishak, A. M. and A. Kadir, M. Z. A. (2015) Behavior of biodegradable oil under impulse voltages. Applied Mechanics and Materials, 785. pp. 320-324. ISSN 1660-9336; ESSN: 1662-7482

Khairuddin, Nuruljannah and Abd Manaf, Latifah and Hassan, Mohd Ali and Halimoon, Normala and Wan Ab. Karim Ghani, Wan Azlina (2015) Biogas harvesting from organic fraction of municipal solid waste as a renewable energy resource in Malaysia: a review. Polish Journal of Environmental Studies, 24 (4). pp. 1477-1490. ISSN 1230-1485; ESSN: 2083-5906

Khairuddin, Nuruljannah and Abd Manaf, Latifah and Halimoon, Normala and Wan Abdul Karim Ghani, Wan Azlina and Hassan, Mohd Ali (2015) High solid anaerobic co-digestion of household organic waste with cow manure. Procedia Environmental Sciences, 30. pp. 174-179. ISSN 1878-0296

Khajeh, Amin and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Banhegyi, Gyorgy and Karacsony, Zsuzsanna and Baranyai, Viktor (2015) The effect of thermo-oxidative aging on the durability of glass fiber-reinforced epoxy. Advances in Materials Science and Engineering, 2015. art. no. 372354. pp. 1-13. ISSN 1687-8434; ESSN: 1687-8442

Khaleel, Mohammed R. and Ahsan, Amimul and Imteaz , Monzur Alam and El-Sergany, Moetaz M. and Nik Daud, Nik Norsyahariati and Mohamed, Thamer Ahmed and Ibrahim, Buthainah A. (2015) Performance of GACC and GACP to treat institutional wastewater: a sustainable technique. Membrane Water Treatment, 6 (4). pp. 339-349. ISSN 2005-8624; ESSN: 2092-7037

Khalefa, Mustafa S. and A. Jabar, Marzanah and Hussein, Waleed Noori and Alasad, Hamid Ali Abed and Zmezm, Hamzah F. (2015) The internet of things software architectural solutions. Australian Journal of Basic and Applied Sciences, 9 (33). pp. 271-277. ISSN 1991-8178

Khalid, Nurul Izzah and Nordin, Norbismi and Abdul Aziz, Nuraini and Ab. Aziz, Norashikin and Taip, Farah Saleena and Anuar, Mohd Shamsul (2015) Design of a test rig for cleaning studies and evaluation of laboratory‐scale experiments using pink guava puree as a fouling deposit model. Journal of Food Process Engineering, 38 (6). pp. 583-593. ISSN 1745-4530

Kheradmand, Behnam and Muniandy, Ratnasamy and Law, Teik Hua and Solouki, Abbas (2015) A laboratory investigation on the rheological properties of aged and unaged organic wax modified asphalt binders. Petroleum Science and Technology, 33 (7). pp. 757-764. ISSN 1091-6466; ESSN: 1532-2459

Khoshsirat, Nima and Md Yunus, Nurul Amziah and Hamidon, Mohd Nizar and Shafie, Suhaidi and Amin, Nowshad (2015) Analysis of absorber and buffer layer band gap grading on CIGS thin film solar cell performance using SCAPS. Pertanika Journal of Science & Technology, 23 (2). pp. 241-250. ISSN 0128-7680; ESSN: 2231-8526

Lai, Ghuan Rhung and Che Soh, Azura and Md. Sarkan, Haslina and Abdul Rahman, Ribhan Zafira and Hassan, Mohd Khair (2015) Controlling traffic flow in multilane-isolated intersection using ANFIS approach techniques. Journal of Engineering Science and Technology, 10 (8). pp. 1009-1034. ISSN 1823-4690

Law, Teik Hua (2015) Factors associated with the relationship between non-fatal road injuries and economic growth. Transport Policy, 42. pp. 166-172. ISSN 0967-070X; ESSN: 1879-310X

Law, Teik Hua and Ghanbari, Mahshid and Hamid, Hussain and Abdul-Halin, Alfian and Ng, Choy Peng (2015) Examining the effect of visual treatments on truck drivers' time-to-arrival judgments of motorcycles at T-intersections. Transportation Research Part F: Traffic Psychology and Behaviour, 33. pp. 66-74. ISSN 1369-8478; ESSN: 1873-5517

Law, Teik Hua and Hamid, Hussain and Goh, Chia Ning (2015) The motorcycle to passenger car ownership ratio and economic growth: a cross-country analysis. Journal of Transport Geography, 46. pp. 122-128. ISSN 0966-6923; ESSN: 1873-1236

Liew, Shan Qin and Chin, Nyuk Ling and Yusof, Yus Aniza and Cheok, Choon Yoong (2015) Citric acid extraction of pectin from tropical fruit peels of passion fruit, dragon fruit and soursop. Journal of Food, Agriculture and Environment, 13 (2). pp. 45-51. ISSN 1459-0263

Lim, C. S. and B. B., Mohd Rafee and Abdul Rahman, Anita and A. S., Shamsul and Mohd Noor, S.B. (2015) Psychometric properties of the Malay version Chronic Stress Screening Scale (CSSS) among manufacturing industry workers. International Journal of Public Health and Clinical Sciences, 2 (3). pp. 94-104. ISSN 2289-7577

Lim, S. C. and Gomes, C. and A. Kadir, M. Z. A. and Nourirad, G. and Malek, Z. A. (2015) Behaviour of backfill materials for electrical grounding systems under high voltage conditions. Journal of Engineering Science and Technology, 10 (6). pp. 811-826. ISSN 1823-4690

Loo, Shing Yan and Tang, Sai Hong and Mashohor, Syamsiah (2015) Active and passive compliance mechanisms in legged robot locomotion. Pertanika Journal of Scholarly Research Reviews, 1 (1). pp. 50-57. ISSN 2462-2028

Lutfy, Omar F. and Selamat, Hazlina and Mohd Noor, Samsul Bahari (2015) Intelligent modeling and control of a conveyor belt grain dryer using a simplified type 2 neuro-fuzzy controller. Drying Technology, 33 (10). pp. 1210-1222. ISSN 0737-3937; ESSN: 1532-2300

M. Almassri, Ahmed and Wan Hassan, Wan Zuha and Ahmad, Siti Anom and Ishak, Asnor Juraiza and Ghazali, A. M. and Talib, D. N. and Wada, Chikamune (2015) Pressure sensor; state of art, design and application for robotic hand. Journal of Sensors, 2015. art. no. 846487. pp. 1-12. ISSN 1687-725X; ESSN: 1687-7268

M. J., Suriania and A., Alib and Abdan, Khalina and Salit, Mohd. Sapuan (2015) Predicting fatigue and damaged modes due to defects of bio-composite materials. Journal of Advanced Research Design, 9 (1). pp. 1-12. ISSN 2289-7984

Maghami, Mohammad Reza and Navabi Ssl, Shahin and Rezadad, Mohammad Esmaeil and Ale Ebrahim, Nader and Gomes, Chandima (2015) Qualitative and quantitative analysis of solar hydrogen generation literature from 2001 to 2014. Scientometrics, 105. pp. 759-771. ISSN 0138-9130; ESSN: 1588-2861

Mahdi, Mohd Adzir and Tamchek, Nizam and Abu Bakar, Muhammad Hafiz and Yeo, Kwok Shien and Mahamd Adikan, Faisal Rafiq (2015) Multiwavelength hybrid fiber raman/parametric linear oscillator. IEEE Photonics Journal, 7 (4). pp. 1-11. ISSN 1943-0647; ESSN: 1943-0655

Malallah, Fahad Layth and Syed Ahmad, Sharifah Mumtazah and Wan Adnan, Wan Azizun and Arigbabu, Olasimbo Ayodeji and Iranmanesh, Vahab and Yussof, Salman (2015) Online handwritten signature recognition by length normalization using up-sampling and down-sampling. International Journal of Cyber-Security and Digital Forensics, 4 (1). pp. 302-313. ISSN 2305-0012

Malekbalaa, Mohamad Rasool and Ali Khan, Moonis and Hosseinia, Soraya and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw (2015) Adsorption/desorption of cationic dye on surfactant modified mesoporous carbon coated monolith: equilibrium, kinetic and thermodynamic studies. Journal of Industrial and Engineering Chemistry, 21. pp. 369-377. ISSN 1226-086X; ESSN: 1876-794X

Mansor, Hasmah and Mohd Noor, Samsul Bahari and Gunawan, Teddy Surya and Khan, Sheroz and Othman, N. I. and Tazali, N. and Islam, R. B. (2015) Performance comparisons between PID and adaptive PID controllers for travel angle control of a bench-top helicopter. International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, 9 (1). pp. 35-40. ISSN 2088-8708; ESSN: 2722-2578

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdul Aziz, Nuraini and Arep @ Ariff, Hambali and Alias, Mohd Fuad (2015) A simplified life cycle analysis of an automotive parking brake lever using polymer composites. Applied Mechanics and Materials, 699. pp. 395-400. ISSN 1660-9336; ESSN: 1662-7482

Mariun, Norman and Mohd Radzi, Mohd Amran and Mailah, Nashiren Farzilah and Velu, Vengadesh (2015) Topologies adopted in the design and development of the single-phase to three-phase direct AC-AC matrix converter for poly phase loads. International Journal of Electrical and Electronics Engineering, 4 (4). pp. 27-34. ISSN 2278-9944; ESSN: 2278-9952

Marzuki, Omar Faruqi and Mohd Rafie, Azmin Shakrine and Romli, Fairuz Izzuddin and Ahmad, Kamarul Arifin (2015) Torque performance study of magnus wind turbine. International Review of Mechanical Engineering (IREME), 9 (1). pp. 38-42. ISSN 1970-8734

Marzuki, Omar Faruqi and Mohd Rafie, Azmin Shakrine and Romli, Fairuz Izzudin and Ahmad, Kamarul Arifin (2015) An experimental investigation on the effect of surface roughness on the performance of Magnus wind turbine. ARPN Journal of Engineering and Applied Sciences, 10 (20). pp. 9725-9729. ISSN 1819-6608

Masuri, Siti Ujila and Kia, John Yu Teck and Abu, Radhiyatul Hikmah (2015) Numerical study of adsorption enhancement by nanoparticles scale inhibitor. Advanced Materials Research, 1119. pp. 43-48. ISSN 1022-6680

Matori, Khamirul Amin and Mohamed Ariff, Azmah Hanim and Mohd. Yusoff, Hamdan and Yunus, Robiah and Ostovan, Farhad and Toozandehjani, Meysam and Oskoueian, Arshin (2015) Microstructural evaluation of ball-milled nano Al2O3 particulate-reinforced aluminum matrix composite powders. International Journal of Materials Research, 106 (6). pp. 636-640. ISSN 1862-5282

Mazandarani, Navid Nasrolah and Ibrahim, Rahinah and Mohammad, Thamer Ahmed and Idris, Azni and Ismail, Muhamad Syahrul Efendi (2015) Proposed sanitation for a timber house constructed on water. ALAM CIPTA, International Journal on Sustainable Tropical Design Research & Practice, 8 (spec.3). pp. 44-48. ISSN 1823-7231; ESSN: 2289-3687

Mazlan, Norkhairunnisa and MN, Muhammad Fariz (2015) Geopolymer: a review on physical properties of inorganic aluminosilicate coating materials. Materials Science Forum, 803 (1). pp. 367-373. ISSN 0255-5476

Mazlan, Norkhairunnisa and Teong, Chee Khoon (2015) Assessment on the compressive strength behavior of hybrid filled epoxy nanocomposite. Jurnal Teknologi, 76 (10). pp. 91-95. ISSN 0127–9696; ESSN: 2180–3722

Md Deros, Mohd Azaman and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Zainudin, Edi Syams and Abdan, Khalina (2015) Optimization and numerical simulation analysis for molded thin-walled parts fabricated using wood-filled polypropylene composites via plastic injection molding. Polymer Engineering & Science, 55 (5). pp. 1082-1095. ISSN 0032-3888; ESSN: 1548-2634

Md Salleh, Liza and Rosland Abel, Stashia Eleaness and Zahedi, Gholamreza and Abd Rahman, Russly and Mohd Nasir, Hasmida and Syed Faua'ad, Syed Anuar (2015) Optimization of supercritical carbon dioxide extraction of Quercus infectoria oil. Jurnal Teknologi, 74 (7). pp. 79-86. ISSN 0127-9696; ESSN: 2180-3722

Md Yunos, Noor Seribainun Hidayah and Baharuddin, Azhari Samsu and Md. Yunos, Khairul Faezah and Hafid, Halimatun Saadiah and Busu, Zainuri and Mokhtar, Mohd Noriznan and Sulaiman, Alawi and Md. Som, Ayub (2015) The physicochemical characteristics of residual oil and fibers from oil palm empty fruit bunches. Bioresources, 10 (1). pp. 14-29. ISSN 1930-2126

Md Yunus, Nurul Amziah and Abdul Halin, Izhal and Sulaiman, Nasri and Ismail, Noor Faezah and Nik Aman, Nik Hasniza (2015) A compilation of nanotechnology in thin film solar cell devices. International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, 9 (8). pp. 777-781. ISSN 1307-6892

Md Yunus, Nurul Amziah and Abdul Halin, Izhal and Sulaiman, Nasri and Ismail, Noor Faezah and Ong, Kai Sheng (2015) Valuation on MEMS pressure sensors and device applications. International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, 9 (8). pp. 768-776. ISSN 0950-4125

Meesuk, Vorawit and Vojinovic, Zoran and Mynett, Arthur E. and Abdullah, Ahmad Fikri (2015) Urban flood modelling combining top-view LiDAR data with ground-view SfM observations. Advances in Water Resources, 75. pp. 105-117. ISSN 0309-1708

Megat Mohd Noor, Megat Johari and Mohamed, Ezzuldin Hasan and Mohammad Ali, Thamer Ahmad and Ghazali, Abdul Halim (2015) Effectiveness of salt-extracted freeze-dried Moringa oleifera as a coagulant. Desalination and Water Treatment, 55 (13). pp. 3621-3627. ISSN 1944-3994; ESSN: 1944-3986

Min, Min Aung and Yaakob, Zahira and Abdullah, Luqman Chuah and Rayung, Marwah and Wong, Jia Lib (2015) A comparative study of acrylate oligomer on jatropha and palm oil-based UV-curable surface coating. Industrial Crops and Products, 77. pp. 1047-1052. ISSN 0926-6690

Misri, Sairizal and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Leman, Zulkiflle (2015) The effect of winding angles on crushing behavior of filament wound hollow kenaf yarn fibre reinforced unsaturated polyester composites. Fibers and Polymers, 16 (10). pp. 2266-2275. ISSN 1229-9197; ESSN: 1875-0052

Misri, Sairizal and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan (2015) Torsional behaviour of filament wound kenaf yarn fibre reinforced unsaturated polyester composite hollow shafts. Materials and Design, 65. pp. 953-960. ISSN 0264-1275; ESSN: 1873-4197

Misron, Norhisam and R. N., Firdaus and Mailah, Nashiren Farzilah and H., Yamada and T., Hanamoto (2015) Power mapping characteristic of double stator permanent magnet generator for electrical harvesting machine. Journal of the Japan Society of Applied Electromagnetics and Mechanics, 23 (3). pp. 510-515. ISSN 0919-4452; ESSN: 2187-9257

Misron, Norhisam and Vaithilingam, Chockalingam Aravind and Mazalan, Siti Khodijah and Mailah, Nashiren Farzilah (2015) Unified control structure of multi-type interior permanent magnet motor. Journal of Engineering Science and Technology, 10 (3). pp. 322-339. ISSN 1823-4690

Moghaddasi, Majid and Mamdoohi, Ghazaleh and Muhammad Noor, Ahmad Shukri and Mahdi, Mohd Adzir and Ahmad Anas, Siti Barirah (2015) Development of SAC–OCDMA in FSO with multi-wavelength laser source. Optics Communications, 356. pp. 282-289. ISSN 0030-4018; ESSN: 1873-0310

Mohamad, Hafizah and Abu Bakar, Muhammad Hafiz and Mahdi, Mohd Adzir (2015) Dispersion variation in ring-type erbium-doped fiber ultrashort pulse laser with single-wall carbon nanotube-based tapered fiber saturable absorber. Microwave and Optical Technology Letters, 57 (10). pp. 2374-2376. ISSN 0895-2477; ESSN: 1098-2760

Mohamad, N. L. and Mokhtar, Mohd Noriznan and Mustapa Kamal, Siti Mazlina (2015) Xylitol biological production: a review of recent studies. Food Reviews International, 31 (1). pp. 74-89. ISSN 8755-9129; ESSN: 1525-6103

Mohamad, Nur Aqilah and Azis, Norhafiz and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Yunus, Robiah and Ishak, Mohd Taufiq and Yaakub, Zaini (2015) A study on the dielectric properties of RBDPO olein under low temperature thermal ageing. Applied Mechanics and Materials, 793. pp. 14-18. ISSN 1660-9336; ESSN: 1662-7482

Mohamad, Ramadhatul Akmal and Taip, Farah Saleena and Mustapa Kamal, Siti Mazlina and Bejo, Siti Khairunniza (2015) Colour and volume development of cake baking and its influence on cake qualities. Journal of Applied Science and Agriculture, 10 (5 spec.). pp. 63-68. ISSN 1816-9112

Mohamad, Roslina and Harun, Harlisya and Mokhtar, Makhfudzah and Dimyati, K. and Wan Adnan, Wan Azizun (2015) Robust stopping criterion in signal-to-noise ratio uncertainty environment. Electronics Letters, 51 (23). 1875 - 1877. ISSN 0013-5194; ESSN: 1350-911X

Mohamad, Roslina and Harun, Harlisya and Mokhtar, Makhfudzah and Wan Adnan, Wan Azizun and Mohamad Anas, Nuzli and Dimyati, Kaharudin (2015) Choosing the right threshold for cross-entropy-based stopping criteria. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 613-618. ISSN 1819-6608

Mohamad Ghazali, Aina Mardhiyah and Wan Hasan, Wan Zuha and Hamidun, Mohd. Nizar and Sabry, Ahmed H. and Ahmed, S. A. and Wada, Chikamune (2015) An accurate wireless data transmission and low power consumption of foot plantar pressure measurements. Procedia Computer Science, 76. pp. 302-307. ISSN 1877-0509

Mohamad Shahapuzi, Nur Syafikah and Taip, Farah Saleena and Ab. Aziz, Norashikin and Ahmedov, Anvarjon (2015) Effect of oven temperature profile and different baking conditions on final cake quality. International Journal of Food Science & Technology, 50 (3). pp. 723-729. ISSN 0950-5423; ESSN: 1365-2621

Mohamad Shahapuzi, Nur Syafikah and Taip, Farah Saleena and Ab. Aziz, Norashikin and Ahmedov, Anvarjon (2015) Empirical modeling study in predicting temperature profile within the convective oven. Journal of Applied Science and Agriculture, 10 (spec.5). pp. 228-232. ISSN 1816-9112

Mohamad Shahapuzi, Nur Syafikah and Taip, Farah Saleena and Ab. Aziz, Norashikin and Ahmedov, Anvarjon (2015) Empirical modelling of the effect of airflow on oven temperature control in cake baking. Journal of Engineering Science, 11. pp. 49-58. ISSN 1823-3430; ESSN: 2180-4214

Mohamad Shahapuzi, Nur Syafikah and Taip, Farah Saleena and Ab. Aziz, Norashikin and Ahmedov, Anvarjon (2015) The effects of airflow on oven temperatures and cakes qualities. Pertanika Journal of Science & Technology, 23 (2). pp. 339-350. ISSN 0128-7680; ESSN: 2231-8526

Mohamad Yusof, U. K. and Che Soh, Azura and M. Radzi, N. F. and Ishak, Asnor Juraiza and Hassan, Mohd Khair and Ahmad, Siti Anom and Khamis, Shamsul (2015) Selection of feature analysis electronic nose signals based on the correlation between gas sensor and herbal phytochemical. Australian Journal of Basic and Applied Sciences, 9 (5). pp. 360-367. ISSN 1991-8178; ESSN: 2309-8414

Mohamad Zen, Nur Izzati and Abd Gani, Siti Salwa and Shamsudin, Rosnah and Masoumi, Hamid Reza Fard (2015) The use of D-optimal mixture design in optimizing development of okara tablet 2 formulation as a dietary supplement. Scientific World Journal, 2015. art. no. 684319. pp. 1-7. ISSN 2356-6140; ESSN: 1537-744X

Mohamed, Ezzuldin Hasan and Mohammad, Thamer Ahmad and Megat Mohd Noor, Megat Johari and Ghazali, Abdul Halim (2015) Influence of extraction and freeze-drying duration on the effectiveness of Moringa oleifera seeds powder as natural coagulant. Desalination and Water Treatment, 55 (13). pp. 3628-3634. ISSN 1944-3994; ESSN: 1944-3986

Mohamed Ariff, Azmah Hanim and Ourdjini, Ali and Idris, Siti Rabiatul Aisha and Osman, Saliza Azlina (2015) Thermal cyclic test for Sn-4Ag-0.5Cu solders on high P Ni/Au and Ni/Pd/Au surface finishes. Journal of Mechanical Engineering and Sciences, 9. pp. 1572-1579. ISSN 2289-4659; ESSN: 2231-8380

Mohammad, Abdul Wahab and Kumar, Abd Ghani and Kadir Basha, Roseliza (2015) Optimization of enzymatic hydrolysis of tilapia (Oreochromis Spp.) scale gelatine. International Aquatic Research, 7 (1). pp. 27-39. ISSN 2008-6970; ESSN: 2008-4935

Mohammad, S. G. and Gomes, Chandima and Ab. Kadir, Mohd. Zainal Abidin and Jasni, Jasronita and Izadi, Mahdi (2015) Medium voltage capacitor banks: characterization and transients generated. Engineering and Scientific International Journal (ESIJ), 2 (2). pp. 23-37. ISSN 2394-7179; ESSN: 2394-7187

Mohammad Noor, Siti Zaliha and Omar, Ahmad Maliki and Mohd Radzi, Mohd Amran (2015) Single-phase single stage string inverter for grid connected photovoltaic system. Applied Mechanics and Materials, 785. pp. 177-181. ISSN 1660-9336; ESSN: 1662-7482

Mohammad Taha, Mastura and Salit, Mohd Sapuan and Mansor, Muhd Ridzuan (2015) A framework for prioritizing customer requirements in product design: incorporation of FAHP with AHP. Journal of Mechanical Engineering and Sciences, 9. pp. 1655-1670. ISSN 2289-4659; ESSN: 2231-8380

Mohammadpour, Reza and Ab Ghani, Aminuddin and Zakaria, Nor Azazi and Mohamed, Thamer Ahmed (2015) Predicting scour at river bridge abutments over time. Proceedings of the Institution of Civil Engineers - Water Management, 170 (1). pp. 15-30. ISSN 1741-7589; ESSN:1751-7729

Mohammed, Maan Hameed and Khmag, Asem and Rokhani, Fakhrul Zaman and Ramli, Abd. Rahman (2015) VLSI implementation of huffman design using FPGA with a comprehensive analysis of power restrictions. International Journal of Advanced Research in Computer Science and Software Engineering, 5 (6). pp. 49-54. ISSN 2277-6451; ESSN: 2277-128X

Mohammed Salih, Dhiadeen and Mohd Noor, Samsul Bahari and Marhaban, Mohammad Hamiruce and Raja Ahmad, Raja Mohd Kamil (2015) Wavelet network: online sequential extreme learning machine for nonlinear dynamic systems identification. Advances in Artificial Intelligence, 2015. art. no. 184318. pp. 1-10. ISSN 1687-7470

Mohd Ariffen, Amizah and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Jasni, Jasronita and Md Arshad @ Hashim, Syahrun Nizam (2015) The electric field effect on angles of copper-type down-conductor. Applied Mechanics and Materials, 793. pp. 24-28. ISSN 1660-9336; ESSN: 1662-7482

Mohd Ariffin, Mohd Khairol Anuar and Ahmad, Siti Azfanizam and Tang, Sai Hong and S., Mojtaba Zabihinpour (2015) Construction of fuzzy X-S control charts with an unbiased estimation of standard deviation for a triangular fuzzy random variable. Journal of Intelligent and Fuzzy Systems, 28. pp. 2735-2747. ISSN 1875-8967; ESSN: 1064-1246

Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Leman, Zulkiflle and Delgoshaei, Aidin (2015) Minimizing makespan of a resource-constrained scheduling problem: a hybrid greedy and genetic algorithms. International Journal of Industrial Engineering Computations, 6 (4). pp. 503-520. ISSN 1923-2934; ESSN: 1923-2926

Mohd Basri, Mohd Salahuddin and Mazlan, Norkhairunnisa and Mustapha, Faizal (2015) A review on thermophysical evaluation of alkali-activated geopolymers. Ceramics International, 41 (3 pt.B). pp. 4273-4281. ISSN 0272-8842; ESSN: 1873-3956

Mohd Halim, A. B. and Chin, Nyuk Ling and Yusof, Yus Aniza (2015) Rheological characterisation of Malaysian varieties of sweet potato doughs using large and small deformation measurements. International Journal of Food Properties, 18. pp. 963-977. ISSN 1094-2912; ESSN: 1532-2386

Mohd Jakarni, Fauzan and Md. Yusoff, Nur Izzi and Wu, Jiantao and A. Aziz, Md. Maniruzzaman (2015) Utilization of sewage sludge molten slag as aggregate substitute in asphalt mixtures. Jurnal Teknologi, 73 (4). pp. 105-110. ISSN 0127-9696; ESSN: 2180-3722

Mohd Nor, Mohd Zuhair and A. Talib, Rosnita and Mohd Adzahan, Noranizan and Chin, Nyuk Ling and Hashim, Kamaruddin (2015) Effects of cooking temperature in repetitive cooking-chilling cycles on resistant starch content and quality characteristics of fish crackers. Pertanika Journal of Science & Technology, 23 (2). pp. 311-323. ISSN 0128-7680; ESSN: 2231-8526

Mohd Rozalli, N. H. and Chin, Nyuk Ling and Yusof, Yus Aniza (2015) Grinding characteristics of Asian originated peanuts (Arachishypogaea L.) and specific energy consumption during ultra-high speed grinding for natural peanut butter production. Journal of Food Engineering, 152. pp. 1-7. ISSN 0260-8774; ESSN: 1873-5770

Mohd Rozalli, N. H. and Chin, Nyuk Ling and Yusof, Yus Aniza (2015) Particle size distribution of natural peanut butter and its dynamic rheological properties. International Journal of Food Properties, 18 (9). pp. 1888-1894. ISSN 1532-2386; ESSN: 1094-2912

Mohd Salleh, Faiqa Shazeaa and Yusof, Yus Aniza and Anuar, Mohd Shamsul and Chin, Nyuk Ling (2015) Understanding the tabletting characteristics of Ficus deltoidea powder by fitting into compression models. Journal of Food Process Engineering, 38 (3). pp. 250-261. ISSN 0145-8876; ESSN: 1745-4530

Mohd Salleh, Salwani and Sahari, Barkawi and Ali, Aidy and Abdul Aziz, Nuraini (2015) Assessment of head injury criteria and chest severity index for frontal impact. Journal of Mechanical Engineering and Sciences, 8. pp. 1376-1382. ISSN 2289-4659; ESSN: 2231-8380

Mohd Shafri, Helmi Zulhaidi and Ebadi, Ladan (2015) A stable and accurate wavelet-based method for noise reduction from hyperspectral vegetation spectrum. Earth Science Informatics, 8 (2). pp. 411-425. ISSN 1865-0473; ESSN: 1865-0481

Mohd Tamrin, Shamsul Bahri and Ng, Yee Guan and Norzan, Muhammad Luthfi and Abu Bakar, Shahriman and Deros, Baba M. and Rambely, Azmin Sham and Zuradzman, Mohamad Razlan and Wan Khairulnizam and Desa, Hazry and Cheng, Ee Meng and M., Afendi (2015) Conceptual design for oil palm evacuation to improve ergonomics issues of collecting fresh fruit bunch. Applied Mechanics and Materials, 786. pp. 281-286. ISSN 1660-9336

Mohd Zahari, Mior Ahmad Khushairi and Ariffin, Hidayah and Mokhtar, Mohd Noriznan and Salihon, Jailani and Shirai, Yoshihito and Hassan, Mohd Ali (2015) Case study for a palm biomass biorefinery utilizing renewable non-food sugars from oil palm frond for the production of poly (3-hydroxybutyrate) bioplastic. Journal of Cleaner Production, 87. pp. 284-290. ISSN 0959-6526

Mokhtar, Taufiq Aminullah and Yusof, Yus Aniza and Chin, Nyuk Ling and Othman, Siti Hajar and Serikbaeva, Asya Demeukhanovna and Aziz, Mohammad Gulzarul (2015) Physicochemical properties of tamarind and pineapple fruit pulps and powders. International Food Research Journal, 22 (2). pp. 707-712. ISSN 1985-4668; ESSN: 2231-7546

Montakhab, Amir and Yusuf, Badronnisa and Folkard, Andrew M. (2015) Flow and turbulence in vegetation in a channel. Proceedings of the Institution of Civil Engineers: Water Management, 168 (1). pp. 16-23. ISSN 1741-7589; ESSN: 1751-7729

Mortezaei, Navid and Zulkifli, Norzima and Nilashi, Mehrbakhsh (2015) Trade-off analysis for multi-objective aggregate production planning. Journal of Soft Computing and Decision Support Systems, 2 (2). pp. 1-4. ISSN 2289-8603

Motlagh, Omd and Paevere, Phillip and Tang, Sai Hong and Grozev, George (2015) Analysis of household electricity consumption behaviours: impact of domestic electricity generation. Applied Mathematics and Computation, 270. pp. 165-178. ISSN 0096-3003

Motlagh, Omid Reza Esmaeili and Jamaludin, Zamberi and Tang, Sai Hong and Khaksar, Weria (2015) An agile FCM for real-time modeling of dynamic and real-life systems. Evolving systems, 6 (3). pp. 153-165. ISSN 1868-6478; ESSN: 1868-6486

Muhadi, Nur 'Atirah and Abdullah, Ahmad Fikri (2015) Flood damage assessment in agricultural area in Selangor river basin. Jurnal Teknologi (Sciences & Engineering), 76 (15). pp. 111-117. ISSN 0127-9696; ESSN: 2180-3722

Muhammad Nasir, Ismail and Mohd. Ghazi, Tinia Idaty (2015) Pretreatment of lignocellulosic biomass from animal manure as a means of enhancing biogas production. Engineering in Life Sciences, 15 (7). pp. 733-742. ISSN 1618-0240; ESSN: 1618-2863

Musa, Dauda Solomon and Ahmad, Desa and Abdan, Khalina and Othman, Jamarei (2015) Effect of cutting speed on cutting torque and cutting power of varying kenaf-stem diameters at different moisture contents. Pertanika Journal of Tropical Agricultural Science, 38 (4). pp. 549-561. ISSN 1511-3701; ESSN: 2231-8542

Musaddiq, Arslan and Hashim, Fazirulhisyam and Che Ujang, Che Ahmad Bukhari and Mohd Ali, Borhanuddin (2015) Survey of channel assignment algorithms for multi-radio multi-channel wireless mesh networks. IETE Technical Review, 32 (3). pp. 164-182. ISSN 0256-4602; ESSN: 0974-5971

Mustapha, Ibrahim and Mohd Ali, Borhanuddin and A. Rasid, Mohd Fadlee and Sali, Aduwati and Mohamad, Hafizal (2015) An energy-efficient spectrum-aware reinforcement learning-based clustering algorithm for cognitive radio sensor networks. Sensors, 15 (8). pp. 19783-19818. ISSN 1424-8220

Mustapha Kamil, Y. and Abu Bakar, Muhammad Hafiz and Mustapa, M. A. and Yaacob, Mohd. Hanif and Amir Hamzah, Amir Syahir and Mahdi, Mohd Adzir (2015) Sensitive and specific protein sensing using single-mode tapered fiber immobilized with biorecognition molecules. IEEE Photonics Journal, 7 (6). art. no. 3700109. pp. 1-9. ISSN 1943-0655

N., Saba and M., Jawaid and K. R., Hakeem and Md. Tahir, Paridah and Abdan, Khalina and O. Y., Alothman (2015) Potential of bioenergy production from industrial kenaf (Hibiscus cannabinus L.) based on Malaysian perspective. Renewable and Sustainable Energy Reviews, 42. pp. 446-459. ISSN 1364-0321; ESSN: 1879-0690

Naeem, Nadeem and Ismail, Alyani and Alhawari, Adam Reda Hasan and Mahdi, Mohd Adzir (2015) Subwavelength negative index planar terahertz metamaterial arrays using spiral split ring resonators for near field sensing. International Journal of Applied Electromagnetics and Mechanics, 47 (3). pp. 827-836. ISSN 1383-5416; ESSN: 1875-8800

Naeem, Nadeem and Ismail, Alyani and Alhawari, Adam Reda Hasan and Mahdi, Mohd Adzir (2015) Terahertz dielectric sensor based on novel meta-atom cluster. Applied Computational Electromagnetics Society Journal, 30 (9). pp. 996-1002. ISSN 1054-4887; ESSN: 1943-5711

Naim, Mohd Nazli and Jaafar, Atiqah Raihan and Abu Bakar, Noor Fitrah and Samsu Baharuddin, Azhari and Kadir Basha, Roseliza and Lenggoro, Ignatius Wuled (2015) Deposition of nanostructures derived from electrostatically stabilised TiO2 aqueous suspension onto a biocomposite. Advanced Powder Technology, 26 (2). pp. 362-367. ISSN 0921-8831; ESSN: 1568-5527

Najafabadi, Saeideh Maleki and Soffianian, Alireza and Rahdari, Vahid and Amiri, Fazel and Pradhan, Biswajeet and Tabatabaei, Tayebh (2015) Geospatial modeling to identify the effects of anthropogenic processes on landscape pattern change and biodiversity. Arabian Journal of Geosciences, 8 (3). pp. 1557-1569. ISSN 1866-7511; ESSN: 1866-7538

Nami, Yousef and Haghshenas, Babak and Abdullah, Norhafizah and Barzegari, Abolfazl and Awang Biak, Dayang Radiah and Rosli, Rozita and Khosroushahi, Ahmad Yari (2015) Probiotic or antibiotic: future challenges in medicine. Journal of Medical Microbiology, 64 (2). pp. 137-146. ISSN 0022-2615; ESSN: 1473-5644

Nami, Yousef and Haghshenas, Babak and Haghshenas, Minoo and Abdullah, Norhafizah and Khosroushahi, Ahmad Yari (2015) The prophylactic effect of probiotic enterococcus lactis IW5 against different human cancel cells. Frontiers in Microbiology, 6. pp. 1-11. ISSN 1664-302X; ESSN: 1664-302X

Nematollahi, Mohammad Ali and Akhaee, Mohammad Ali and Syed Mohamed, Syed Abdul Rahman Al-Haddad and Rosales, Hamurabi Gamboa (2015) Semi-fragile digital speech watermarking for online speaker recognition. EURASIP Journal on Audio, Speech, and Music Processing, 2015 (1). art. no. 31. pp. 1-15. ISSN 1687-4722

Nematollahi, Mohammad Ali and Al-Haddad, Syed Abdul Rahman and Zarafshan, Faraneh (2015) Blind digital speech watermarking based on Eigen-value quantization in DWT. Journal of King Saud University-Computer and Information Sciences, 27 (1). pp. 58-67. ISSN 1319-1578; ESSN: 2213-1248

Nematollahi, Mohammad Ali and Rosales, Hamurabi Gamboa and Akhaee, Mohammad Ali and Syed Mohamed, Syed Abdul Rahman Al-Haddad (2015) Robust digital speech watermarking for online speaker recognition. Mathematical Problems in Engineering, 2015. art. no. 372398. pp. 1-12. ISSN 1024-123X; ESSN: 1563-5147

Neshat, Aminreza and Pradhan, Biswajeet (2015) Risk assessment of groundwater pollution with a new methodological framework: application of Dempster-Shafer theory and GIS. Natural Hazards, 78 (3). pp. 1565-1585. ISSN 0921-030X; ESSN: 1573-0840

Neshat, Aminreza and Pradhan, Biswajeet (2015) An integrated DRASTIC model using frequency ratio and two new hybrid methods for groundwater vulnerability assessment. Natural Hazards, 76 (1). 543-563. ISSN 0921-030X; ESSN: 1573-0840

Neshat, Aminreza and Pradhan, Biswajeet and Javadi, Saman (2015) Risk assessment of groundwater pollution using Monte Carlo approach in an agricultural region: an example from Kerman Plain, Iran. Computers Environment and Urban Systems, 50. pp. 66-73. ISSN 0198-9715

Nik Daud, Nik Norsyahariati and Abu Mansor, Nursheela and Ahsan, Amimul and Idrus, Syazwani (2015) Leachate treatment by using aged refuse (AR) as a biofilter medium. Polish Journal of Environmental Studies, 24 (2). pp. 605-609. ISSN 1230-1485

Nikbakht, Ehsan and Rashid, Khalim and Hejazi, Farzad and Osman, Siti Aminah (2015) Application of shape memory alloy bars in self-centring precast segmental columns as seismic resistance. Structure and Infrastructure Engineering, 11 (3). pp. 297-309. ISSN 1573-2479; ESSN: 1744-8980

Nima Farzadnia and Noorvand, Hossein and Mohamed Yasin, Abdirahman and A. Aziz, Farah Nora (2015) The effect of nano silica on short term drying shrinkage of POFA cement mortars. Construction and Building Materials, 95. pp. 636-646. ISSN 0950-0618; ESSN: 1879-0526

Nizami, Abdul Sattar and Rehan, Mohammad and Oud, Omar K. M. and Shahzad, Khurram and Sadef, Yumna and Iqbal, Tariq and Ismail, Iqbal (2015) An argument for developing waste-to-energy technologies in Saudi Arabia. Chemical Engineering Transactions, 45. pp. 337-342. ISSN 2283-9216

Nourqolipour, Ramin and Mohamed Shariff, Abdul Rashid and Balasundram, Siva Kumar and Ahmad, Noordin and Sood, Alias M. and Buyong, Taher and Amiri, Fazel (2015) A GIS-based model to analyze the spatial and temporal development of oil palm land use in Kuala Langat district, Malaysia. Environmental Earth Sciences, 73 (4). pp. 1687-1700. ISSN 1866-6280; ESSN: 1866-6299

Omar, Hamdan and Ismail, Mohd Hasmadi and Hamzah, Khali Aziz and Kamarudin, Norizah and Mohd Shafri, Helmi Zulhaidi (2015) L-band saturation level for aboveground biomass of dipterocarp forests in Peninsular Malaysia. Journal of Tropical Forest Science, 27 (3). pp. 388-399. ISSN 0128-1283

Osman, Rosiah and Ramli, Abdul Rahman and Wan Adnan, Wan Azizun and Hasan, Intan Helina (2015) RFID-enabled web-based interface for a chemical storage management system. Pertanika Journal of Science & Technology, 23 (1). pp. 73-88. ISSN 0128-7680; ESSN: 2231-8526

Osman, Rosiah and Ramli, Abdul Rahman and Wan Adnan, Wan Azizun and Hasan, Intan Helina (2015) RFID-enabled web-based interface for chemical storage management system. Pertanika Journal of Science & Technology, 23 (1). pp. 73-88. ISSN 0128-7680

Othman, Muhammad Murtadha and Harun, Mohd Hafez Hilmi and Salim, Nur Ashida and Othman, Mohammad Lutfi (2015) Sequential process of feature extraction methods for artificial neural network in short term load forecasting. ARPN Journal of Engineering and Applied Sciences, 10 (19). pp. 8830-8838. ISSN 1819-6608

Othman, Siti Hajar and Abdul Rashid, Suraya and Mohd Ghazi, Tinia Idaty and Abdullah, Norhafizah (2015) 3D CFD simulations: effect of operation parameters on the deposition of photocatalytic TiO2 nanoparticles by MOCVD. Chemical Vapor Deposition, 21 (4-5-6). pp. 99-110. ISSN 0948-1907; ESSN: 1521-3862

Parvez Iqbal, A. K. M. and Zabri, N. H. M. and Sahari, K. S. M. and Asif Iqbal, A. K. M. and Aris, Ishak (2015) Process involved in designing of an intelligent additional track mechanism tracked vehicle for swamp peat terrain. Indian Journal of Science and Technology, 8 (17). pp. 1-6. ISSN 0974-6846; ESSN: 0974-5645

Penjumras, Patpen and Abdul Rahman, Russly and A. Talib, Rosnita and Abdan, Khalina (2015) Response surface methodology for the optimization of preparation of biocomposites based on poly(lactic acid) and durian peel cellulose. The Scientific World Journal, 2015. art. no. 293609. pp. 1-12. ISSN 2356-6140; ESSN: 1537-744X

Pillaiyan, Ganesh and Muniandy, Ratnasamy and Avurkaba, Eltaher (2015) An overview of conventional and surface free energy methods used to determine asphalt aggregate adhesion. Australian Journal of Basic and Applied Sciences, 9 (5). pp. 98-102. ISSN 1991-8178

Poh, En Liewa and Shanmugarajah, Bawaanii and Mei, Irene Leng Chew and Choong, Thomas Shean Yaw and Khang, Wei Tan (2015) Ultrasound assisted extraction of nano calcium from waste eggshell: a preliminary study on crystal violet dye removal. Chemical Engineering Transaction, 45 (1). pp. 1711-1716. ISSN 2283-9216; ESSN: 1974-9791

Pourakbar, Shahram (2015) Deep mixing columns. Pertanika Journal of Scholarly Research Reviews, 1 (1). pp. 8-17. ISSN 2462-2028

Pourakbar, Shahram and Asadi, Afshin and Kim Huat, Bujang and Fasihnikoutalab, Mohammad Hamed (2015) Soil stabilisation with alkali-activated agro-waste. Environmental Geotechnics, 2 (6). pp. 359-370. ISSN 2051-803X

Pradhan, Biswajeet and Mohamed Shariff, Abdul Rashid and Mansor, Shattri and Abdullahi, Saleh (2015) GIS-based modeling for the spatial measurement and evaluation of mixed land use development for a compact city. GIScience & Remote Sensing, 52 (1). pp. 18-39. ISSN 15481603

Praveena, Sarva Mangala and Pradhan, Biswajeet and Syed Ismail, Sharifah Norkhadijah (2015) Spatial assessment of heavy metals in surface soil from Klang District (Malaysia): an example from a tropical environment. Human and Ecological Risk Assessment, 21 (7). pp. 1980-2003. ISSN 1080-7039; ESSN: 1549-7860

Quek, Meei Chien and Chin, Nyuk Ling and Yusof, Yus Aniza and Tan, Sheau Wei and Law, Chung Lim (2015) Preliminary nitrite, nitrate and colour analysis of Malaysian edible bird's nest. Information Processing in Agriculture, 2 (1). pp. 1-5. ISSN 2214-3173

R., Naizatulshila and Idris, Azni and Harun, Mohd Razif and Wan Ab. Karim Ghani, Wan Azlina (2015) The influence of inoculum to substrate ratio on the biochemical methane potential of fat, oil, and grease in batch anaerobic assays. Energy Sources Part A-Recovery Utilization and Environmental Effects, 37 (6). pp. 590-597. ISSN 1556-7036; ESSN: 1556-7230

Raghunandan, Mavinakere Eshwaraiah and Sharma, Jitendra S. and Pradhan, Biswajeet (2015) A review on the effect of rubber membrane in triaxial tests. Arabian Journal of Geosciences, 8 (5). pp. 3195-3206. ISSN 1866-7511; ESSN: 1866-7538

Rahmad N., Firdaus and Misron, Norhisam and Sulaiman, Farina and Nirei, Masami and Wakiwaka, Hiroyuki (2015) Performance comparison of spoke and hollow-rotor permanent magnet generator for small energy harvesting application. Journal of the Japan Society of Applied Electromagnetics and Mechanics, 23 (3). pp. 516-520. ISSN 0919-4452; ESSN: 2187-9257

Raja Abdullah, Raja Syamsul Azmir and Salah, Asem Ahmad and Abdul Rashid, Nur Emileen (2015) Moving target detection by using new LTE-based passive radar. Progress In Electromagnetics Research B, 63. pp. 145-160. ISSN 1937-6472

Raja Ahmad, Raja Mohd Kamil and Mohd Hani, Ahmad Fadzil and Kumar, Dileep and Malik, Aamir Saeed and Razak, Ruslan and Kiflie, Azman (2015) Non-invasive in vivo assessment of osteoarthritic articular cartilage: a review on MRI investigations. Rheumatology International, 35 (1). pp. 1-16. ISSN 0172-8172; ESSN: 1437-160X

Ramarad, Suganti and Siddiqui, Mohammad Khalid and Ratnam, Chantara Thevy and Abdullah, Luqman Chuah and Walvekar, Rashmi Gangasa (2015) Waste tire rubber in polymer blends: a review on the evolution, properties and future. Progress in Materials Science, 72. pp. 100-140. ISSN 0079-6425; ESSN: 1873-2208

Rambabu, Rethnaraj and Bahiki, Muhammad Rijaluddin and Md Ali, Syaril Azrad (2015) Relative position-based collision avoidance system for swarming UAVs using multi-sensor fusion. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10012-10017. ISSN 1819-6608

Ramlee, Ridza Azri and Ramli, Abdul Rahman and Sulaiman, Hamzah Asyrani (2015) A review on diseases manifestation by ocular diseases using computer aided diagnosis (CAD). International Journal of Engineering and Technology, 7 (4). pp. 1343-1348. ISSN 0975-4024; ESSN: 2319-8613

Ramli, Rosmamuhamadani and Sulaiman, Shamsuddin and Ismail, Mohd Idris Shah and Mohamed Ariff, Azmah Hanim and Talari, Mahesh Kumar (2015) Wear properties of metal matrix composites Al-Cu and Al-Cu-TiB2. Materials Science Forum, 819. pp. 268-273. ISSN 0255-5476; ESSN: 1662-9752

Rashed, Musaab K. and Mohd Salleh, Mohamad Amran and Abdulbari, Hayder and Ismail, Mohd Halim Shah and Siajam, Shamsul Izhar (2015) The effects of electrode and catalyst selection on microfluidic fuel cell performance. ChemBioEng Reviews, 2 (5). pp. 356-372. ISSN 2196-9744

Razali, Nadlene and Salit, Mohd Sapuan and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and Lazim, Yusriah (2015) Material characterization of Roselle fibre (Hibiscus sabdariffa L.) as potential reinforcement material for polymer composites. Fibres and Textiles in Eastern Europe, 23 (6). pp. 23-30. ISSN 1230-3666; ESSN: 2300-7354

Razali, Nadlene and Salit, Mohd Sapuan and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and Lazim, Yusriah (2015) A study on chemical composition, physical, tensile, morphological, and thermal properties of roselle fibre: Effect of fibre maturity. BioResources, 10 (1). pp. 1803-1824. ISSN 1930-2126

Renny Eka Putri and Yahya, Azmi and Adam, Nor Maria and Abd Aziz, Samsuzana (2015) Correlation of moisture content to selected mechanical properties of rice grain sample. International Journal on Advanced Science, Engineering and Information Technology, 5 (5). pp. 264-267. ISSN 2088-5334

Richard, Adesiji Adeolu and Mohammad, Thamer Ahmed and Nik Daud, Nik Norsyahariati and Mustapha, Sa'ari and Sayok, Alexander Kiew and Olukemi, Gbadebo Anthonia (2015) Assessment of chemical properties of tropical peatland soil in Malaysia oil palm plantation. Nigerian Journal of Technological Research, 10 (2). pp. 12-16. ISSN 0795-5111

Richard, Adesiji Adeolu and Mohammed, Thamer Ahmed and Nik Daud, Nik Norsyahariati and Mustapha, Sa'ari and Sayok, Alexander Kiew and Padfield, Roryd and Evers, Stephanie (2015) Investigating the influence of rainfall on soil carbon quantity in a tropical peatland. Procedia Environmental Sciences, 30. pp. 44-49. ISSN 1878-0296

Rodney, Jammy and Japar, Sahari and Mohd Shah, Mohd Kamal and Salit, Mohd Sapuan (2015) Thermochemical and mechanical properties of tea tree (Melaleuca alternifolia) fibre reinforced tapioca starch composites. e-Polymers, 15 (6). pp. 401-409. ISSN 2197-4586; ESSN: 1618-7229

Romli, Fairuz Izzudin and Harmin, Mohammad Yazdi (2015) Use of Monte Carlo method to estimate subsystem redesign risk for complex products: aircraft redesign case study. Aircraft Engineering and Aerospace Technology, 87 (6). pp. 563-570. ISSN 1748-8842; ESSN: 1758-4213

Roshanravan, Bita and Soltani, Shahram Mahmoud and Abdul Rashid, Suraya and Mahdavi, Fariba and Yusop, Mohd Khanif (2015) Enhancement of nitrogen release properties of urea–kaolinite fertilizer with chitosan binder. Chemical Speciation & Bioavailability, 27 (1). pp. 44-51. ISSN 0954-2299; ESSN: 2047-6523

Roshanzamir, Ali and Piltan, Farzin and Jahed, Arman and Namvarchi, Saman and Nazari, Iman and Sulaiman, Nasri (2015) Research on nonlinear automation for first order delays system. International Journal of Hybrid Information Technology, 8 (9). pp. 313-328. ISSN 1738-9968

Roslan, Jumardi and Mustapa Kamal, Siti Mazlina and Md. Yunos, Khairul Faezah and Abdullah, Norhafizah (2015) Optimization of enzymatic hydrolysis of tilapia (Oreochromis niloticus) by-product using response surface methodology. International Food Research Journal, 22 (3). pp. 1117-1123. ISSN 1985-4668; ESSN: 2231-7546

Rowshanaie, Omid and Mustapha, Saari and Ahmad, Kamarul Arifin and Rowshanaie, Hooman (2015) Simulation of organic rankine cycle through fluegas to large scale electricity generation purpose. Jurnal Teknologi, 77 (27). pp. 9-18. ISSN 0127-9696; ESSN: 2180-3722

Rusli, Halimatusaadiah and Gomes, Chandima and Kadir, Zainal and Abdul-Malek, Zulkurnain (2015) Surface arcing of insulators due to bentonite contamination. Journal of Electrostatics, 76. pp. 73-77. ISSN 0304-3886

S., Imamoto and Hiroaki, Yamada and Tsuyoshi, Hanamoto and Yoshihito, Shirai and Misron, Norhisam (2015) A battery charging system for intermittent generation from a synchronous generator with a novel maximum power point tracking control. Journal of the Japan Society of Applied Electromagnetics and Mechanics, 23 (3). pp. 567-572. ISSN 0919-4452; ESSN: 2187-9257

S., Sivasangar and Ali, Salmiaton and Zainal, Zulkarnain and Yap, Taufiq Yun Hin (2015) Supercritical water gasification of empty fruit bunches from oil palm for hydrogen production. Fuel, 143. pp. 563-569. ISSN 0016-2361; ESSN: 1873-7153

Saad, Siti Asmahani and Abd. Aziz, Farah Nora Aznieta and Ali, Maisarah (2015) Effect of tropical climate condition to compressive strength and microstructure properties of high performance fiber reinforced reinforced concrete (HPFRC). Advanced Materials Research, 1115. pp. 182-187. ISSN 1022-6680; ESSN: 1662-8985

Saadat, Md Nazmus and Mohd Ali, Borhanuddin and Sali, Aduwati and Raja Abdullah, Raja Syamsul Azmir and Mohamad, Hafizal (2015) Resource allocation algorithm for improving performance of the OFDMA based connection oriented networks. International Journal of Applied Engineering Research, 3 (6). pp. 1-24. ISSN 2054-7420

Saalah, Sariah and Abdullah, Luqman Chuah and Aung, Min Min and Salleh, Mek Zah and Awang Biak, Dayang Radiah and Basri, Mahiran and Jusoh, Emiliana Rose (2015) Waterborne polyurethane dispersions synthesized from jatropha oil. Industrial Crops and Products, 64. pp. 194-200. ISSN 0926-6690; ESSN: 1872-633X

Saba, Naheed and Md. Tahir, Paridah and Abdan, Khalina and Ibrahim, Nor Azowa (2015) Preparation and characterization of fire retardant nano-filler from oil palm empty fruit bunch fibers. BioResources, 10 (3). pp. 4530-4543. ISSN 1930-2126

Sabiani, N. H. M. and Idris, Azni and Wan Ab. Karim Ghani, Wan Azlina and Baharuddin, Azhari Samsu (2015) The effect of ultrasonic energy on the enhancement of the biodegradability of food waste. Energy Sources, Part A: Recovery, Utilization, and Environmental Effect, 37 (13). pp. 1397-1405. ISSN 1556-7036; ESSN: 1556-7230

Sabow, Azad Behnan and Sazili, Awis Qurni and Idrus, Zulkifli and Goh, Yong Meng and Ab Kadir, Mohd Zainal Abidin and Abdulla, Nazim Rasul and Nakyinsige, Khadijah and Kaka, Ubedullah and Adeyemi, Kazeem Dauda (2015) A comparison of bleeding efficiency, microbiological quality and lipid oxidation in goats subjected to conscious halal slaughter and slaughter following minimal anesthesia. Meat Science, 104. pp. 78-84. ISSN 0309-1740; ESSN: 1873-4138

Sabow, Azad Behnan and Sazili, Awis Qurni and Idrus, Zulkifli and Goh, Yong Meng and Ab Kadir, Mohd Zainal Abidin and Adeyemi, Kazeem Dauda (2015) Physico-chemical characteristics of Longissimus lumborum muscle in goats subjected to halal slaughter and anesthesia (halothane) pre-slaughter. Animal Science Journal, 86 (12). pp. 981-991. ISSN 1344-3941; ESSN: 1740-0929

Sabry, Ahmad H. and Wan Hasan, Wan Zuha and Ab Kadir, Mohd Zainal Abidin and Mohd Radzi, Mohd Amran and Shafie, Suhaidi (2015) Alternative solar-battery charge controller to improve system efficiency. Applied Mechanics and Materials, 785. pp. 156-161. ISSN 1660-9336; ESSN: 1662-7482

Sadrolhosseini, Amir Reza and Muhammad Noor, Ahmad Shukri and Mehdipour, Lotf Ali and Noura, Amin and Mahdi, Mohd Adzir (2015) Application of thermal lens technique to measure the thermal diffusivity of biodiesel blend. Optical Review, 22 (2). pp. 289-293. ISSN 1340-6000; ESSN:1349-9432

Sahad, Naimah and Md. Som, Ayub and Baharuddin, Azhari Samsu and Mokhtar, Mohd Noriznan and Busu, Zainuri and Sulaiman, Alawi (2015) Recovery of residual crude palm oil (RCPO) from oil palm decanter cake (OPDC) using D-limonene. Advanced Materials Research, 1113. pp. 405-410. ISSN 1022-6680; ESSN: 1662-8985

Sahamijoo, Amirzubir and Piltan, Farzin and Mohammadi Jaberi, Sareh and Sulaiman, Nasri (2015) Prevent the risk of lung cancer progression based on fuel ratio optimization. International Journal of u- and e- Service, Science and Technology, 8 (2). pp. 45-60. ISSN 2005-4246; ESSN: 2207-9718

Sahbudin, Ratna Kalos Zakiah and Tan, Terry Kwang Chun and Ahmad Anas, Siti Barirah and Hitam, Salasiah and Mokhtar, Makhfudzah (2015) SAC-OCDMA over hybrid FTTx free space optical communication networks. Journal of Telecommunications and Information Technology, 2 (2). pp. 52-58. ISSN 1509-4553

Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Nadlene, R. and Jawaid, M. (2015) Mercerization effect on morphology and tensile properties of roselle fibre. Applied Mechanics and Materials, 754-755. pp. 955-959. ISSN 1660-9336

Salman, Mustafa Ismael and Ng, Chee Kyun and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin and Sali, Aduwati (2015) A self‐configured link adaptation for green LTE downlink transmission. Transactions on Emerging Telecommunications Technologies, 26 (2). pp. 258-275. ISSN 2161-3915

Salman, Suhad D. and Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Cardona, Francisco (2015) Physical, mechanical, and morphological properties of woven kenaf/polymer composites produced using a vacuum infusion technique. International Journal of Polymer Science, 2015. art. no. 894565. pp. 1-11. ISSN 1687-9422; ESSN: 1687-9430

Samsudin, Sarah Hanim and M. Shafri, Helmi Z. and Hamedianfar, Alireza and Mansor, Shattri (2015) Spectral feature selection and classification of roofing materials using field spectroscopy data. Journal of Applied Remote Sensing, 9 (1). 095079-1. ISSN 1931-3195

Sarker, Md. Sazzat Hossain and Ibrahim, Mohd Nordin and Ab. Aziz, Norashikin and Punan, Mohd Salleh (2015) Application of simulation in determining suitable operating parameters for industrial scale fluidized bed dryer during drying of high impurity moist paddy. Journal of Stored Products Research, 61. pp. 76-84. ISSN 0022-474X; ESSN: 1879-1212

Shabaneh, Arafat Abdallah Abdelwadod and Girei, Saad Hayatu and M. Thirunavakkarasu, Punithavathi and Mahdi, Mohd Adzir and Abdul Rashid, Suraya and Paiman, Suriati and Yaacob, Mohd. Hanif (2015) Dynamic response of tapered optical multimode fiber coated with carbon nanotubes for ethanol sensing application. Sensors, 15 (5). pp. 10452-10464. ISSN 1424-8220

Shahbazpanahi, Shahriar and Abang Ali, Abang Abdullah and Kamgar, Alaleh and Farzadnia, Nima (2015) Fracture mechanic modeling of fiber reinforced polymer shear-strengthened reinforced concrete beam. Composites Part B: Engineering, 68. pp. 113-120. ISSN 1359-8368; ESSN: 1879-1069

Shahi, Kaveh and Mohd Shafri, Helmi Zulhaidi and Taherzadeh, Ebrahim and Mansor, Shattri and Muniandy, Ratnasamy (2015) A novel spectral index to automatically extract road networks from WorldView-2 satellite imagery. The Egyptian Journal of Remote Sensing and Space Science, 18 (1). pp. 27-33. ISSN 1110-9823

Shahmohammadi, M. Sadegh and Mohd. Yusuff, Rosnah and Keyhanian, Sina and Shakouri G., Hamed (2015) A decision support system for evaluating effects of feed-in tariff mechanism: dynamic modeling of Malaysia’s electricity generation mix. Applied Energy, 146. pp. 217-229. ISSN 0306-2619; ESSN: 1872-9118

Shahril, A. and Samin, Razali and J. M., Juraidi and Daut, Jufriadi (2015) Structural analysis of brake disc using dynamic simulation. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7805-7808. ISSN 1819-6608

Shaikh, Irfan Ahmed and Wayayok, Aimrun and Abdullah, Ahmad Fikri and Mohd Soom, Mohd Amin and Mangrio, Munir Ahmed (2015) Assessment of water application losses through irrigation surveys: a case study of Mirpurkhas subdivision, Jamrao irrigation scheme, Sindh, Pakistan. Indian Journal of Science and Technology, 8 (11). pp. 1-15. ISSN 0974-6846; ESSN: 0974-5645

Shaikh, Irfan Ahmed and Wayayok, Aimrun and Lee, Teang Shui (2015) Preference index-based allocation of optimized cropping area at the Mirpurkhas subdivision: Jamrao irrigation scheme in Sindh, Pakistan. Journal of Irrigation and Drainage Engineering, 141 (12). pp. 1-10. ISSN 0733-9437; ESSN: 1943-4774

Shamsuddin, Rosnah and Baharudin, B. T. Hang Tuah and Yunus, Robiah and Lim, B. Y. (2015) Performance study of a Jatropha curcas l. fruit shelling machine for kernel recovery in biodiesel production. Applied Engineering in Agriculture, 31 (5). pp. 755-765. ISSN 0883-8542

Shareef, Wessam Zayd and Ismail, Alyani and Alhawari, Adam Reda Hasan (2015) Substrate-perforated and compact ultra-wideband antenna with WLAN band rejection. International Journal of Microwave and Wireless Technologies, 7 (5). pp. 543-550. ISSN 1759-0787; ESSN: 1759-0795

Shimada, Masao and Masuri, Siti Ujila and Tamma, Kumar K. (2015) A novel design of an isochronous integration [iIntegration] framework for first/second order multidisciplinary transient systems. International Journal for Numerical Methods in Engineering, 102 (3-4). pp. 867-891. ISSN 0029-5981; ESSN: 1097-0207

Shuaibu, Alhassan and Rahman, Md. Mahmudur and Onimisi, Muhammed Yusuf (2015) Numerical investigation of vibrational properties and study of some selected physical properties of potassium chloride (KCl). Journal of Computational and Theoretical Nanoscience, 12 (4). pp. 647-651. ISSN 1546-1955; ESSN: 1546-1963

Sivapragasam, Magaret and Abdullah, Norhafizah (2015) Recovery of cyclodextrin glucanotransferase (CGTase) using immobilized metal chelating affinity chromatography. Brazilian Journal of Chemical Engineering, 32 (1). pp. 43-52. ISSN 0104-6632

Sobhanmanesh, Ali and Nazir, Ramli and Saadatkhah, Nader (2015) Effect of weathered surface crust layer on stability of Muar trial embankment. Jurnal Teknologi (Sciences & Engineering), 76 (2). pp. 31-38. ISSN 0127-9696; ESSN: 2180-3722

Solouki, A. and Muniandy, Ratnasamy and Hassim, Salihudin and Kheradmand, B. (2015) Rheological property investigation of various Sasobit-modified bitumen. Petroleum Science and Technology, 33 (7). pp. 773-779. ISSN 1091-6466; ESSN: 1532-2459

Subramonian, Sivarao and Dimin @ Mohd. Amin, Mohd Fairuz and Faris, N. M. F. and Arep @ Ariff, Hambali and Malingam, Sivakumar Dhar and Salit, Mohd Sapuan (2015) Analytical hierarchy process for design selection of micro hot-marking tool. Applied Mechanics and Materials, 699. pp. 897-902. ISSN 1660-9336; ESSN: 1662-7482

Sulaiman, S. A. and Mohamed Zawawi, Mohamed Azwan and Mohamed, E. H. (2015) Analysis of tubewell performance as an evaluation of the physical aquifer model being developed. Journal of Advanced Review on Scientific Research, 11 (1). pp. 37-45. ISSN 2289-7887

Sulaiman, Safwan and Mokhtar, Mohd Noriznan and Naim, Mohd Nazli and Baharuddin, Azhari Samsu and Mohd Salleh, Mohamad Amran and Sulaiman, Alawi (2015) Study on the preparation of cellulose nanofibre (CNF) from kenaf bast fibre for enzyme immobilization application. Sains Malaysiana, 44 (11). pp. 1541-1550. ISSN 0026-6039

Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Magid, Hani Mizhir (2015) Modelling and simulation of hollow profile aluminium extruded product. Applied mechanics and Materials, 761. pp. 17-21. ISSN 1660-9336

Sulaiman, Shamsuddin and Leman, Zulkifle and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Man, Shamsudin (2015) Process parameters for cylindrical deep drawing components. Advances in Materials and Processing Technologies, 1 (3-4). pp. 542-548. ISSN 2374-068X; ESSN: 2374-0698

Syafiie, Syafiie and Hermansson, Ayman William (2015) Model predictive control of pH neutralization processes: a review. Control Engineering Practice, 45. pp. 98-109. ISSN 0967-0661

Syed Mohamed, Muhammad Syafiq and Mohd Tamrin, Shamsul Bahri and Abdul Rahman, Ahmad Rizal and Abdul Jalil, Nawal Aswan (2015) Issues surrounding car center stack designs in Malaysia: an exploratory study. Applied Mechanics and Materials, 761. pp. 693-697. ISSN 1660-9336; ESSN: 1662-7482

Talib, Noraini and Mohamed, Noorizan and Hussein, Mohd Kher and Abdul Shukor, Shureen Faris (2015) Post occupancy evaluation of Putra Perdana park. Applied Mechanics and Materials, 747. pp. 97-100. ISSN 1660-9336

Tamjidy, Mehran and Paslar, Shahla and Baharudin, B. T. Hang Tuah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar (2015) Biogeography based optimization (BBO) algorithm to minimise non-productive time during hole-making process. International Journal of Production Research, 53 (6). pp. 1880-1894. ISSN 0020-7543; ESSN: 1366-588X

Tan, Mei Ching and Chin, Nyuk Ling and Yusof, Yus Aniza and Taip, Farah Saleena and Abdullah, Jaafar (2015) Characterisation of improved foam aeration and rheological properties of ultrasonically treated whey protein suspension. International Dairy Journal, 43. pp. 7-14. ISSN 0958-6946; ESSN: 1879-0143

Tan, Mei Ching and Chin, Nyuk Ling and Yusof, Yus Aniza and Taip, Farah Saleena and Abdullah, Jaafar (2015) Improvement of eggless cake structure using ultrasonically treated whey protein. Food and Bioprocess Technology, 8 (3). pp. 605-614. ISSN 1935-5130; ESSN: 1935-5149

Tanimu, Musa Idris and Mohd Ghazi, Tinia Idaty and Harun, Mohd Razif and Idris, Azni (2015) Effect of feedstock carbon to nitrogen ratio and organic loading on foaming potential in mesophilic food waste anaerobic digestion. Applied Microbiology and Biotechnology, 99 (10). pp. 4509-4520. ISSN 0175-7598; ESSN: 1432-0614

Tee, Y. B. and A. Talib, Rosnita and Abdan, Khalina and Chin, Nyuk Ling and Kadir Basha, Roseliza and Md. Yunos, Khairul Faezah (2015) Reinforcing mechanical, water absorption and barrier properties of poly(lactic acid) composites with kenaf-derived cellulose of thermally-grafted aminosilane. Pertanika Journal of Tropical Agricultural Science, 38 (4). pp. 563-573. ISSN 1511-3701; ESSN: 2231-8542

Tee, Yee Bond and A. Talib, Rosnita and Abdan, Khalina and Chin, Nyuk Ling and Kadir Basha, Roseliza and Md. Yunos, Khairul Faezah (2015) Reinforcing mechanical, water absorption and barrier properties of poly (lactic acid) composites with kenaf-derived cellulose of thermally-grafted aminosilane. Pertanika Journal of Tropical Agricultural Science, 38 (4). pp. 563-573. ISSN 1511-3701; ESSN: 2231-8542

Tehrany, Mahyat Shafapour and Pradhan, Biswajeet and Jebur, Mustafa Neamah (2015) Flood susceptibility analysis and its verification using a novel ensemble support vector machine and frequency ratio method. Stochastic Environmental Research and Risk Assessment, 29 (4). pp. 1149-1165. ISSN 1436-32401; ESSN: 436-3259

Tengku Mohd, Tengku Azman and Hassan, Mohd Khair and Abdul Aziz, Wan Mohd Khidhir (2015) Mathematical modeling and simulation of an electric vehicle. Journal of Mechanical Engineering and Sciences, 8. pp. 1312-1321. ISSN 2289-4659; ESSN: 2231-8380

Tengku Mohd, Tengku Azman and Hassan, Mohd Khair and Aris, Ishak and Che Soh, Azura and K. Ibrahim, B. S. K. and Hat, Mohd Kamal (2015) Simulation based study of electric vehicle parameters. ARPN Journal of Engineering and Applied Sciences, 10 (19). pp. 8541-8546. ISSN 1819-6608

Thien, Yee Von and Azis, Norhafiz and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Yunus, Robiah and Ishak, Mohd Taufiq and Hamzah, Ngah Ramzi (2015) A study on the lightning impulse breakdown voltages of palm oil and coconut oil by different methods. Applied Mechanics and Materials, 793. pp. 9-13. ISSN 1660-9336; ESSN: 1662-7482

Toosi, Saman and Misron, Norhisam and Hanamoto, Tsuyoshi and Aris, Ishak and Mohd Radzi, Mohd Amran and Yamada, Hiroaki (2015) The study of operation modes and control strategies of a multidirectional MC for battery based system. Mathematical Problems in Engineering. art. no. 452740. pp. 1-14. ISSN 1024-123X; ESSN: 1563-5147

Touati, Farid and Erdene-Ochir, Ochirkhand and Mehmood, Waiser and Hassan, Ammad and Mnaouer, Adel Ben and Gaabab, Brahim and A. Rasid, Mohd Fadlee and Khriji, Lazhar (2015) An experimental performance evaluation and compatibility study of the bluetooth low energy based platform for ECG monitoring in WBANs. International Journal of Distributed Sensor Networks, 2015. art. no. 645781. pp. 1-12. ISSN 1550-1329; ESSN: 1550-1477

Vahabzadeh, Ali Haji and Mohd Yusuff, Rosnah (2015) A content analysis in reverse logistics: a review. Journal of Statistics & Management System, 18 (4). pp. 329-379. ISSN 0972-0510; ESSN: 2169-0014

Varahram, Pooria and Mohd Ali, Borhanuddin (2015) Implementation of a low complexity peak-to-average power ratio reduction scheme on field programmable gate array. Wireless Personal Communications, 82. pp. 1863-1875. ISSN 1572-834X; ESSN: 0929-6212

Varatharajoo, Renuganth and Ismail, Zuliana (2015) Reaction wheel configurations for high and middle inclination orbits. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10034-10042. ISSN 1819-6608

Vivi Anggraini, and Kim Huat, Bujang and Asadi, Afshin and Nahazanan, Haslinda (2015) Relationship between the compressive and tensile strengths of lime-treated clay containing coconut fibres. Acta Geotchnica Slovenica (1). pp. 49-57. ISSN 1854-0171

Wan Sharifudin, Wan Siti Shazzelyn Aida and Sulaiman, Alawi and Mokhtar, Noriznan and Baharuddin, Azhari Samsu and Tabatabaei, Meisam and Busu, Zainuri and Subbian, Karuppuchamy (2015) Presence of residual oil in relation to solid particle distribution in palm oil mill effluent. Bioresources, 10 (4). pp. 7591-7603. ISSN 1930-2126

Ya'acob, Mohammad Effendy and Hizam, Hashim and Yoshio, Hashimoto and Adam, Mohd Bakri and Othman, Noor Fadzlinda (2015) Field evaluation of five-level heat dissipation models under PV array structure installed in the tropics. Applied Mechanics and Materials, 789-790. pp. 416-421. ISSN 1660-9336; ESSN: 1662-7482

Yahya, Mohd Ainor and Othman, Muhammad Murtadha and Abdul Razak, Muhd Azri and Zakaria, Zilaila and Musirin, Ismail and Kari, Mat Nasir and Osman, Mohd Fazli and Abu Hassan, Mohd Zaini and Mohd Dzin, Siti Habsah and Azrae, Baihaki and Wan Ismail, Wan Shazli and Salleh, Mohd Hisham and Jafar, Shaharani and Othman, Mohammad Lutfi (2015) Ant colony optimization technique in optimal capacitor placement and sizing problem in unbalanced electrical distribution system. Applied Mechanics and Materials, 785. pp. 78-82. ISSN 1660-9336; ESSN: 1662-7482

Yamin, Muhammad and Nasir, Abdul and Sultan, Muhammad and Wan Ismail, Wan Ishak and Shamshiri, Ramin and Akbar, Farah Naz (2015) Impact of sewage and industrial effluents on water quality in Faisalabad, Pakistan. Advances in Environmental Biology, 9 (18). pp. 53-58. ISSN 1995-0756; ESSN:1998-1066

Yang, Zon Yee and Pourghasemi, Hamid Reza and Pradhan, Biswajeet and Chen, Tien Cheng and Lee, Yen Hung (2015) An index to describe the earthquake effect on subsequent landslides in Central Taiwan. Arabian Journal of Geosciences, 8 (5). pp. 3139-3147. ISSN 1866-7511; ESSN:1866-7538

Yeoh, Hooi S. and Choong, Thomas S. Y. and Mohd Adzahan, Noranizan and Abdul Rahman, Russly and Chong, Gun H. (2015) Solubility of camphene and caryophyllene oxide in subcritical and supercritical carbon dioxide. Engineering Journal, 19 (4). pp. 93-106. ISSN 0125-8281

Yew, Chung Chak and Varatharajoo, Renuganth (2015) A novel design of spacecraft combined attitude & sun tracking system using a versatile fuzzy controller. Aircraft Engineering and Aerospace Technology, 87 (6). pp. 530-539. ISSN 0002-2667

Yoshida, Hiroyuki and Siajam, Shamsul Izhar and Nishio, Eiichiro and Utsumi, Yasuhiko and Kakimori, Nobuaki and Asghari, Feridoun Salak (2015) Recovery of indium from TFT and CF glasses of LCD wastes using NaOH-enhanced sub-critical water. Journal of Supercritical Fluid, 104. pp. 40-48. ISSN 0896-8446; ESSN: 1872-8162

Yousif, Rana Amir and Muniandy, Ratnasamy and Hassim, Salihudin and Mohd Jakarni, Fauzan and Aburkaba, Eltaher Elzarroug (2015) An overview of quantification of fatigue resistance of asphalt mixture using pre-aged binder. WALIA Journal, 31 (S1). pp. 125-132. ISSN 1026-3861

Youssef, Ahmed M. and Al-Kathery, Mohamed and Pradhan, Biswajeet (2015) Assessment of impact of mass movements on the upper Tayyah valleys bridge along Shear escarpment highway, Asir region (Saudi Arabia) using remote sensing data and field investigation. Natural Hazards and Earth System Sciences, 3 (1). pp. 497-533. ISSN 1561-8633; ESSN: 1684-9981

Youssef, Ahmed M. and Pradhan, Biswajeet and Al-Harthi, Saad G. (2015) Assessment of rock slope stability and structurally controlled failures along Samma escarpment road, Asir Region (Saudi Arabia). Arabian Journal of Geosciences, 8 (9). pp. 6835-6852. ISSN 1866-7511; ESSN: 1866-7538

Youssef, Ahmed M. and Pradhan, Biswajeet and Al-Kathery, Mohamed and Bathrellos, George D. and Skilodimou, Hariklia D. (2015) Assessment of rockfall hazard at Al-Noor Mountain, Makkah city (Saudi Arabia) using spatio-temporal remote sensing data and field investigation. Journal of African Earth Sciences, 101. pp. 309-321. ISSN 1464-343X; ESSN: 1879-1956

Youssef, Ahmed M. and Pradhan, Biswajeet and Jebur, Mustafa Neamah and El-Harbi, Hassan M. (2015) Landslide susceptibility mapping using ensemble bivariate and multivariate statistical models in Fayfa area, Saudi Arabia. Environmental Earth Sciences, 73 (7). pp. 3745-3761. ISSN 1866-6280; ESSN: 1866-6299

Youssef, Ahmed M. and Pradhan, Biswajeet and Sefry, Saleh A. (2015) Remote sensing-based studies coupled with field data reveal urgent solutions to avert the risk of flash floods in the Wadi Qus (east of Jeddah) Kingdom of Saudi Arabia. Natural Hazards, 75 (2). pp. 1465-1488. ISSN 0921-030X; ESSN: 1573-0840

Youssef, Ahmed M. and Pradhan, Biswajeet and Sefry, Saleh A. and Abdullah, Mazen M. Abu (2015) Use of geological and geomorphological parameters in potential suitability assessment for urban planning development at Wadi Al-Asla basin, Jeddah, Kingdom of Saudi Arabia. Arabian Journal of Geosciences, 8 (8). pp. 5617-5630. ISSN 1866-7511; ESSN: 1866-7538

Yunus, Robiah and Syafiie, Syafiie and Zainal Abidin, Zurina and Noerhidajat (2015) Modeling and simulation of heat and mass transfer in oil palm fruit digestion process. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS), 6 (2). pp. 136-143. ISSN 2141-7016

Yunusa, Zainab and Abdul Rashid, Suraya and Hamidon, Mohd Nizar and Syed Hafiz and Ismail, Ismayadi and Rahmanian, Saeed (2015) Synthesis of y-tip graphitic nanoribbons from alcohol catalytic chemical vapor deposition on piezoelectric substrate. Journal of Nanomaterials, 501. art. no. 754768. ISSN 1687-4110; ESSN: 1687-4129

Yusof, Yus Aniza and Etti, Christopher Joseph and Chin, Nyuk Ling (2015) Development of nutraceutical product. International Journal on Advanced Science, Engineering and Information Technology, 5 (3). pp. 201-206. ISSN 2088-5334; ESSN: 2460-6952

Yusoff, Suhaimizi and Pradhan, Biswajeet and Manap, Mohamad Abd and Mohd Shafri, Helmi Zulhaidi (2015) Regional gold potential mapping in Kelantan (Malaysia) using probabilistic based models and GIS. Central European Journal of Geosciences (Open Geosciences), 7. pp. 149-161. ISSN 2081-9900; ESSN:1896-1517

Yusuf, Badronnisa and Mohd Shafri, Helmi Zulhaidi and Mohamed, Thamer Ahmed and Zahidi, Izni and Hamedianfar, Alireza (2015) Object-based classification of QuickBird image and low point density LIDAR for tropical trees and shrubs mapping. European Journal of Remote Sensing, 48. pp. 423-446. ISSN 1129-8596; ESSN: 2279-7254

Zahari, Nur Ismarrubie and Goh, Han Lin and Masuri, Siti Ujila and Yussof, Hanafiah (2015) Bio-mechanism response of Mimosa pudica against external stimulation. Advanced Materials Research, 1125. pp. 588-592. ISSN 1022-6680; ESSN: 1662-8985

Zakaria, Mohd Rafein and Hirata, Satoshi and Fujimoto, Shinji and Hassan, Mohd Ali (2015) Combined pretreatment with hot compressed water and wet disk milling opened up oil palm biomass structure resulting in enhanced enzymatic digestibility. Bioresource Technology, 193. pp. 128-134. ISSN 0960-8524; ESSN: 1873-2976

Zakaria @ Mamat, Mohd Rafein and Hirata, Satoshi and Hassan, Mohd Ali (2015) Hydrothermal pretreatment enhanced enzymatic hydrolysis and glucose production from oil palm biomass. Bioresource Technology, 176. pp. 142-148. ISSN 0960-8524; ESSN: 1873-2976

Zakikhani, Parnia and Zahari, Rizal and Sultan, Mohamed T. H. and Majid, Dayang L. (2015) Thermal degradation of four bamboo species. Bioresources, 11 (1). pp. 414-425. ISSN 1930-2126

Zawani, Z. and Abdullah, Luqman Chuah and Abdan, Khalina (2015) Characterization of kenaf fibre-retting wastewater. International Journal of Science and Research, 4 (6). pp. 314-317. ISSN 1832-1011; ESSN: 2319-7064

Zubair, Mohammed and Ahmad, Kamarul Arifin and Abdullah, Mohd Zulkifly and Sufian, Shaker Farid (2015) Characteristic airflow patterns during inspiration and expiration: experimental and numerical investigation. Journal of Medical and Biological Engineering, 35 (3). pp. 387-394. ISSN 1609-0985; ESSN: 2199-4757

Zulkifli, Noor Aishah Atiqah and Md. Ali, Sawal Hamid and Ahmad, Siti Anom and Islam, Md Shabiul (2015) Review on support vector machine (SVM) classifier for human emotion pattern recognition from EEG signals. Asian Journal of Information Technology, 14 (4). pp. 135-146. ISSN 1682-3915; ESSN: 1993-5994

Book

Ab Razak, Mohd Shahrizal (2015) Natural headland sand bypassing: towards identifying and modelling the mechanisms and processes. CRC Press/Balkema, Leiden. ISBN 1138028649/9781138028647

Askari, Mohammad Tolou and Ab. Kadir, Mohd. Zainal Abdin and Bolandifar, Saeideh (2015) Loss of life of the mineral oil immersed transformers. Lambert Academic Publishing, Germany. ISBN 3659630063/9783659630064

Dahham, Zahraa and Sali, Aduwati and Mohd. Ali, Borhanuddin (2015) Efficient back-off mechanism for IEEE802.15.4 wireless sensor networks. Lambert Academic Publishing, Germany. ISBN 3659761931/9783659761935

Muhammad Kafi, Kamil and Mohd Shafri, Helmi Zuhaidi (2015) Monitoring land use and urban changes in Kaduna using satellite data. Lambert Academic Publishing, Germany. ISBN 9783659477812

Book Section

Abd Manab, Mohd Fairuz and Salit, Mohd Sapuan and Zainudin, Edi Syams and Jaafar, Che Nor Aiza (2015) Pultrusion process of natural fibre-reinforced polymer composites. In: Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer International Publishing Switzerland, Cham, pp. 217-231. ISBN 9783319079431; EISBN: 9783319079448

De Xing, Lioe and Shafie, Suhaidi and Ramiah, Harikrishnan and Sulaiman, Nasri and Abdul Halin, Izhal (2015) Low power transmitter for capsule endoscope. In: Recent Trends in Physics of Material Science and Technology. Springer Series in Materials Science (204). Springer, Singapore, pp. 111-122. ISBN 9789812871282; EISBN: 9789812871275

Hasan, Mahbub and Hoque, Muhammad Enamul and Mir, Samia Sultana and Saba, Naheed and Salit, Mohd Sapuan (2015) Manufacturing of coir fibre-reinforced polymer composites by hot compression technique. In: Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer International Publishing Switzerland, Switzerland, pp. 309-330. ISBN 9783319079448; EISBN: 9783319079448

Md Deros, Mohd Azaman and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Zainudin, Edi Syams and Abdan, Khalina (2015) Processability of wood fibre-filled thermoplastic composite thin-walled parts using injection moulding. In: Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer International Publishing Switzerland, Cham, pp. 351-367. ISBN 9783319079431; EISBN: 9783319079448

Mehrjou, Mohammad Rezazadeh and Mariun, Norman and Karami, Mahdi and Mohd Noor, Samsul Bahari and Zolfaghari, Sahar and Misron, Norhisam and Ab. Kadir, Mohd Zainal Abidin and Mohd. Radzi, Mohd. Amran and Marhaban, Mohammad Hamiruce (2015) Wavelet-based analysis of MCSA for fault detection in electrical machine. In: Wavelet Transform and Some of Its Real-World Applications. InTech, London, UK, pp. 79-110. ISBN 9789535122302; EISBN: 9789535157670

Misri, Sairizal and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Leman, Zulkiflle (2015) Filament winding process for kenaf fibre reinforced polymer composites. In: Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer International Publishing Switzerland, Cham, pp. 369-383. ISBN 9783319079431; EISBN: 9783319079448

Mohd Harithuddin, Ahmad Salahuddin and Trivailo, Pavel M. and Jazar, Reza N. (2015) On the razi acceleration. In: Nonlinear Approaches in Engineering Applications. Springer, Switzerland, pp. 31-58. ISBN 9783319094618

Mokhtar, Makhfudzah and Hussin, Supyan and Embi, Mohamed Amin (2015) Edmodo for interactive lecture: a focus on transparent and ubiquitous learning. In: e-Learning & Interactive Lecture: SoTL Case Studies in Malaysian HEIs. Pusat Pengajaran & Teknologi Pembelajaran, UKM, UKM, pp. 183-192. ISBN 9789833168484

Muhd Julkapli, Nurhidayatullaili and Bagheri, Samira and Salit, Mohd Sapuan (2015) Bio-nanocomposites from natural fibre derivatives: manufacturing and properties. In: Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer International Publishing Switzerland, Cham, pp. 233-265. ISBN 9783319079431; EISBN: 9783319079448

Muhd Julkapli, Nurhidayatullaili and Bagheri, Samira and Salit, Mohd Sapuan (2015) Multi-functionalized carbon nanotubes polymer composites: properties and applications. In: Eco-friendly Polymer Nanocomposites: Processing and Properties. Advanced Structured Materials, 75 . Springer India, New Delhi, pp. 155-214. ISBN 9788132224693; EISBN: 9788132224709

Romli, Fairuz Izzuddin and Rashid, H. (2015) Point-to-point transportation analysis for domestic travel in Malaysia. In: Engineering Management and Industrial Engineering. CRC Press, London, pp. 231-236. ISBN 9781138027732

Salit, Mohd Sapuan and Sanyang, Muhammed Lamin and J., Sahari (2015) Development and properties of sugar palm fibre reinforced polymer composites. In: Green Biorenewable Biocomposite: From Knowledge to Industrial Application. Apple Academic Press, Oakville, Canada, pp. 289-322. ISBN 9781771880329

Salit, Mohd Sapuan and Yusoff, Nukman (2015) The relationship between manufacturing and design for manufacturing in product development of natural fibre composites. In: Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer International Publishing Switzerland, Switzerland, pp. 1-15. ISBN 9783319079431; EISBN: 9783319079448

Sulaiman, Shamsuddin (2015) Material application, performance and life cycle. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-5. ISBN 9780128035818

Conference or Workshop Item

A., Alia and M., Nizam and N., Effendy and I., Fakhrul and A., Tanaka (2015) Automatic text summarization using fuzzy reasoning method. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 116-117).

Abd Manaf, Syaifulnizam and Mustapha, Norwati and Mohd Shafri, Helmi Zulhaidi and Sulaiman, Md. Nasir and Husin, Nor Azura (2015) Comparison between pixel-based and object based classifications using radar satellite image in extracting massive flood extent at northern region of Peninsular Malaysia. In: 5th International Conference on Computing and Informatics (ICOCI 2015), 11-13 Aug. 2015, Istanbul, Turkey. (pp. 73-79).

Abd Rahman, Muhammad Syahmi and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Gomes, Chandima and Jasni, Jasronita and Jamaludin, Farah Adilah (2015) Considering the effect of angle on polymer insulator performance under wet condition. In: 2015 IEEE Conference on Energy Conversion (CENCON), 19-20 Oct. 2015, Johor Bahru, Malaysia. (pp. 358-362).

Abdul Aziz, Noor Hafizah and M. Y., Haziq Hazwan and Abdul Rashid, Nur Emileen and Raja Abdullah, Raja Syamsul Azmir and Othman, Kama Azura and Salah, Asem Ahmad (2015) RCS analysis on different targets and bistatic angles using LTE frequency. In: 16th International Radar Symposium (IRS 2015), 24-26 June 2015, Dresden, Germany. .

Abdul Karim, Hezerul and Mohamad, Hafizal and Ramli, Nordin and Sali, Aduwati (2015) Multiple description video coding for underlay cognitive radio network. In: 10th International Conference on Cognitive Radio Oriented Wireless Networks (CROWNCOM 2015), 21-23 Apr. 2015, Doha, Qatar. (pp. 643-652).

Abdul Rahman, Nor Farahaida and Mohd Radzi, Mohd Amran and Che Soh, Azura and Mariun, Norman and Abd Rahim, Nasrudin (2015) Double soft-computing techniques based triple functionalities for shunt active power filter with voltage source inverter topology. In: 2015 IEEE 15th International Conference on Environment and Electrical Engineering (EEEIC 2015), 10-13 June 2015, Rome, Italy. (pp. 796-801).

Abdul Wahab, Noor Izzri and Kadhem, Athraa Ali (2015) A simple method to deduce minimal cut sets by tracing minimal paths for reliability assessment of power systems. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 10-11).

Abdulelah, Ahmed and Che Soh, Azura and Abdullah, Nor Arymaswati and Hassan, Mohd Khair and Mohd Noor, Samsul Bahari (2015) Simulated real time controller using modified hill climbing algorithm on fixed wing airplane. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 June 2015, Kota Kinabalu, Sabah. .

Abdullah, Nor Arymaswati and Che Soh, Azura and Abdul Rahman, Ribhan Zafira and Mohd Noor, Samsul Bahari (2015) Analysis of a gain tuning PID controller for pressure control in UCP plant. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 12-14).

Abdulrazzaq, Bilal Isam and Abdul Halin, Izhal and Mohd Sidek, Roslina and Shafie, Suhaidi and Md Yunus, Nurul Amziah and Kawahito, Shoji (2015) Sub-picosecond jitter resolution wide range digital delay line for SoC integration. In: 2015 IEEE International Circuits and Systems Symposium (ICSyS 2015), 2-4 Sept. 2015, Holiday Villa Beach Resort & Spa, Langkawi, Kedah. (pp. 44-48).

Adnan, Nor Aizam and Syed Ariffin, Sharifah Diyana and Asmat, Arnis and Mansor, Shattri (2015) Rainfall trend analysis and geospatial mapping of the Kelantan River Basin. In: International Symposium on Flood Research and Management 2015 (ISFRAM 2015), 5-7 Oct. 2015, Hotel Grand Blue Wave, Shah Alam, Malaysia. (pp. 237-247).

Ahanchian, Ehsan and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Hanafi, Marsyita (2015) Robotic cans surface inspection system based on shape features. In: 2015 IEEE International Symposium on Robotics and Intelligent Sensors (IEEE IRIS 2015), 18-20 Oct. 2015, Langkawi, Kedah, Malaysia. (pp. 266-270).

Ahmad, Nor Izzati and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Zaini, Nur Hazirah and Mohd Radzi, Mohd Amran and Azis, Norhafiz (2015) Effect of temperature on a poly-crystalline solar panel in large scale solar plants in Malaysia. In: 2015 IEEE Conference on Energy Conversion (CENCON), 19-20 Oct. 2015, Johor Bahru, Malaysia. (pp. 244-248).

Ahmed, Iman and Aris, Ishak and Marhaban, Mohammad Hamiruce and Ishak, Asnor Juraiza (2015) Power consumption rate analysis of Bioloid humanoid robot: towards energy saving and source development. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 June 2015, Kota Kinabalu, Sabah. .

Ahmed, Maytham Sabeeh and Mohamed, Azah and Homod, Raad Z. and Shareef, Hussain and Sabry, Ahmad H. and Khalid, Khairuddin (2015) Smart plug prototype for monitoring electrical appliances in home energy management system. In: 2015 IEEE Student Conference on Research and Development (SCOReD), 13-14 Dec. 2015, Berjaya Times Square Hotel, Kuala Lumpur, Malaysia. (pp. 32-36).

Al Khanjar, Karrar Naji Salman and Ismail, Alyani and Saeedi, Tale (2015) High gain coplanar UHF RFID tag antenna using inductively coupled feed for metallic applications. In: 2015 IEEE 12th Malaysia International Conference on Communications (MICC 2015), 23-25 Nov. 2015, Kuching, Sarawak, Malaysia. (pp. 77-81).

Al-Frajat, Jaafar Khadair Kadam and Flayyih, Wameedh Nazar and Mohd Sidek, Roslina and Samsudin, Khairulmizam and Rokhani, Fakhrul Zaman (2015) Area efficient test circuit for library standard cell qualification. In: 5th International Conference on Energy Aware Computing Systems & Applications (ICEAC 2015), 24-26 Mar. 2015, Cairo, Egypt. .

Al-Hussaini, Khalid Taher Mohammed and Mohd Ali, Borhanuddin and Varahram, Pooria and Hashim, Shaiful Jahari (2015) A novel low complexity high efficiency hybrid PAPR reduction for OFDM systems. In: 2015 IEEE 12th Malaysia International Conference on Communications (MICC 2015), 23-25 Nov. 2015, Kuching, Sarawak, Malaysia. (pp. 345-350).

Al-Jumaili, Batool Eneaze Bandar and Talib, Zainal Abidin and Liew, Josephine Ying Chyi and Paiman, Suriati and Ahmed, Naser Mahmoud and Al-Jumaily, Abdulmajeed Hammadi Jasim and Ramizy, Asmiet and Abdulateef, Sinan A. and Muh'd, Ibrahim Bagudo and Mofdal, Manahil Elnoor Edam (2015) The correlation of blue shift of photoluminescence and morphology of silicon nanoporous. In: International Conference on Nano-Electronic Technology Devices and Materials (IC-NET 2015), 27 Feb.-2 Mar. 2015, Shah Alam, Selangor. (pp. 1-5).

Al-Khaled, Al-Fadhl Yahya Khaled and Abd Aziz, Samsuzana and Wan Ismail, Wan Ishak and Rokhani, Fakhrul Zaman (2015) Capacitive sensing system for frying oil assessment during heating. In: 2015 IEEE International Circuits and Systems Symposium (ICSyS 2015), 2-4 Sept. 2015, Holiday Villa Beach Resort & Spa, Langkawi, Kedah. (pp. 137-141).

Al-Qazwini, Yusser A. Taqi and Muhammad Noor, Ahmad Shukri and Yaacob, Mohd Hanif and Mahdi, Mohd Adzir and Harun, Sulaiman Wadi (2015) Influence of design parameters on the performance of a refractive index sensor based on SPR in plastic optical fibers. In: 2015 IEEE Photonics Conference (IPC), 4-8 Oct. 2015, Reston, Virginia. (pp. 341-342).

Al-Quraishi, Maged Saleh Saeed and Ishak, Asnor Juraiza and Ahmad, Siti Anom and Hassan, Mohd Khair (2015) Impact of feature extraction techniques on classification accuracy for EMG based ankle joint movements. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 June 2015, Kota Kinabalu, Sabah. .

Al-Saadi, Abdulwahab A. Abdulrahman and Aris, Ishak (2015) CNG-diesel dual fuel engine: a review on emissions and alternative fuels. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 June 2015, Kota Kinabalu, Sabah. .

Al-Shanoon, Abdulrahman Abdulkareem Sattoori and Ahmad, Siti Anom and Hassan, Mohd Khair (2015) Investigation of piezoresistive sensor for robotic gripping operations. In: 2015 IEEE Student Symposium in Biomedical Engineering & Sciences (ISSBES 2015), 4 Nov. 2015, UiTM Shah Alam, Selangor. (pp. 54-58).

Al-Wajedi, Muayad Khalil Murtadha and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin and Hashim, Fazirulhisyam (2015) Fully distributed mobility management scheme for future heterogeneous wireless networks. In: 2015 IEEE 12th Malaysia International Conference on Communications (MICC 2015), 23-25 Nov. 2015, Kuching, Sarawak, Malaysia. (pp. 270-275).

Alawee, Wissam Hameed and Dhahad, Hayder Abed and Mohammed Ali, Thamer Ahmed (2015) An experimental study on improving the performance of a double slope solar still. In: 7th International Conference on Sustainable Agriculture for Food, Energy and Industry in Regional and Global Context (ICSAFEI 2015), 25-27 Aug. 2015, Faculty of Engineering, Universiti Putra Malaysia. (pp. 1-10).

Alhamdawee, Ehsan Mohsin Obaid and Mailah, Nashiren Farzilah and Mohd Radzi, Mohd Amran and Shafie, Suhaidi (2015) Development of fuzzy logic controller for maximum power point tracking technique of photovoltaic system. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 19-20).

Alhammadi, Abdulraqeb Shaif Ahmed and Hashim, Fazirulhisyam and Shami, Tareq M. (2015) Indoor localization system using particle swarm optimization. In: 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 Apr. 2015, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia. (pp. 574-577).

Ali, Mohammed Sabah and Mohamed Ariff, Azmah Hanim and Jaafar, Che Nor Aiza and Mohd Tahir, Suraya and Mazlan, Norkhairunnisa (2015) Ceramic matrix composite materials reinforced with low metal particles content: a review. In: INTROP Research Colloquim 2015, 1-2 Dec. 2015, RHR Hotel, Uniten, Putrajaya. .

Ali, Nasser Hasan and Mohd Ali, Borhanuddin and Basir, Otman and Othman, Mohammad Lutfi and Hashim, Fazirulhisyam (2015) WLAN oriented optimization of process bus in IEC 61850-based substation communication network. In: 3rd International Renewable and Sustainable Energy Conference (IRSEC'15), 10-13 Dec. 2015, Marrakech, Morocco. .

Alkubaisi, Yasir Mahmood Abdulah and Wan Hasan, Wan Zuha and Mohd Noor, Samsul Bahari and Azis, Norhafiz and Sabry, Ahmed H. (2015) Investigation on self energized automated multi levels car parking system. In: 2015 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2015), 19-21 Aug. 2015, Primula Beach Hotel, Kuala Terengganu. .

Almassri, Ahmed M. and Wan Hasan, Wan Zuha and Ahmad, Siti Anom and Ishak, Asnor Juraiza and Wada, Chikamune (2015) Optimisation of grasping object based on pressure sensor measurement for robotic hand gripper. In: 2015 9th International Conference on Sensing Technology (ICST 2015), 8-10 Dec. 2015, Auckland, New Zealand. (pp. 795-798).

Almohammedi, Akram A. and Noordin, Nor Kamariah and Saeed, Sabri (2015) Evaluating the impact of transmission range on the performance of VANET. In: 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 Apr. 2015, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia. (pp. 609-612).

Alsaedi, Noor and Hashim, Fazirulhisyam and Sali, Aduwati (2015) Energy trust system for detecting sybil attack in clustered wireless sensor networks. In: 2015 IEEE 12th Malaysia International Conference on Communications (MICC 2015), 23-25 Nov. 2015, Kuching, Sarawak, Malaysia. (pp. 91-95).

Alwan, Omar Hussein and Wan Hasan, Wan Zuha and Che Soh, Azura and Jaafar, Haslina (2015) Fundamental references over insole plantar pressure in terms of human body weight percentage. In: 2015 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2015), 19-21 Aug. 2015, Primula Beach Hotel, Kuala Terengganu. .

Amat Sairin, Masyitah and Ahmad Nizar, Nina Naquiah and Abd Aziz, Samsuzana and Mat Hashim, Dzulkifly and Rokhani, Fakhrul Zaman (2015) Potential of dielectric spectroscopy measurement for lard detection. In: 2015 9th International Conference on Sensing Technology (ICST), 8-10 Dec. 2015, Auckland, New Zealand. (pp. 722-727).

Aminian, Negin Ozve and Romli, Fairuz Izzuddin and Wiriadidjaja, Surjatin (2015) Usability evaluation survey for identifying design issues in civil flight deck. In: 3rd International Conference on Geological, Geographical, Aerospace and Earth Science 2015 (AeroEarth 2015), 26–27 Sept. 2015, DoubleTree Hilton, Jakarta, Indonesia. (pp. 1-6).

Aris, Ishak and Sahbudin, Ratna Kalos Zakiah and Muhammad Amin, Ahmad Fairuz (2015) Impacts of IoT and big data to automotive industry. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 June 2015, Kota Kinabalu, Sabah. .

Askari, Mohammad Tolou and Ab Kadir, Mohd Zainal Abidin and Bolandifar, Ehsan (2015) Evaluation of FIT impacts on market clearing price in the restructured power market. In: 2015 IEEE Student Conference on Research and Development (SCOReD), 13-14 Dec. 2015, Berjaya Times Square Hotel, Kuala Lumpur, Malaysia. (pp. 224-227).

Asmat, Arnis and Mansor, Shattri and Saadatkhah, Nader and Adnan, Nor Aizam and Khuzaimah, Zailani (2015) Land use change effects on extreme flood in the Kelantan basin using hydrological model. In: International Symposium on Flood Research and Management 2015 (ISFRAM 2015), 5-7 Oct. 2015, Hotel Grand Blue Wave, Shah Alam, Malaysia. (pp. 221-236).

Ayeop Abdul Khalil, Farah Deba and Abd. Aziz, Farah Nora Aznieta and Hassim, Salihuddin and Jaafar, Mohd Saleh (2015) A review on industrialised building system issues in Malaysia. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2015), 1-2 Dec. 2015, Melaka, Malaysia. (pp. 1-4).

Azhari, Saman and Hamidon, Mohd Nizar and Usman, Kamilu Iman and Hasan, Intan Helina and Ismail, Ismayadi and Nicodemus, Kure (2015) Effect of aggregation on dielectric property of MWCNT/PDMS nanocomposite. In: 2015 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2015), 19-21 Aug. 2015, Primula Beach Hotel, Kuala Terengganu. .

Azmi, Akmalina and Jasni, Jasronita and Azis, Norhafiz (2015) Health index as a tool for transformers asset management. In: International Conference on Power, Energy and Communication Systems (IPECS 2015), 24-25 Aug. 2015, Universiti Malaysia Perlis. .

Baba, Makama Abdullahi and Ali, Salmiaton and Saion, Elias and Choong, Thomas Shean Yaw and Abdullah, Norhafizah (2015) Microwave assisted synthesis of porous ZnO/SnS heterojunction and its application in visible light degradation of ciprofloxacin. In: International Conference on Nano-Electronic Technology Devices and Materials (IC-NET 2015), 27 Feb.-2 Mar. 2015, Shah Alam, Selangor. (pp. 1-5).

Baharudin, Bahadurhisham and Sulaiman, Nasri and Md Yunus, Nurul Amziah (2015) Demonstrating behavioural soft robotics to light source. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 291-292).

Bahiraei, Nima and Panjehfouladgaran, Hamidreza and Mohd Yusuff, Rosnah (2015) Ranking of critical success factors in reverse logistics by TOPSIS. In: 2015 5th International Conference on Industrial Engineering and Operations Management (IEOM), 3-5 Mar. 2015, Dubai, United Arab Emirates. .

Behrooz, Farinaz and Mariun, Norman and Marhaban, Mohammad Hamiruce and Mohd Radzi, Mohd Amran and Ramli, Abdul Rahman (2015) New design approach to MIMO nonlinear controller for direct expansion air conditioning system in building automation system. In: 2015 IEEE 15th International Conference on Environment and Electrical Engineering (EEEIC 2015), 10-13 June 2015, Rome, Italy. .

Bejo, Siti Khairunniza and Azman, Norsolehah and Jamil, Norazlida (2015) Paddy grading using thermal imaging technology. In: 7th International Conference on Sustainable Agriculture for Food, Energy and Industry in Regional and Global Context (ICSAFEI 2015), 25-27 Aug. 2015, Faculty of Engineering, Universiti Putra Malaysia. (pp. 1-8).

Chan, Felicia and Mohd Yusuff, Rosnah and Zulkifli, Norzima (2015) Barriers to advanced manufacturing technology in small-medium enterprises (SMEs) in Malaysia. In: 2015 International Symposium on Technology Management and Emerging Technologies (ISTMET 2015), 25-27 Aug. 2015, Langkawi, Kedah, Malaysia. (pp. 412-416).

Che Hamzah, Nurul Husna and Yahya, Azmi and Samsu Baharuddin, Azhari and Che Man, Hasfalina (2015) Pre-treatments enhancing biodegradation of EFB fibers for composting. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 345-347).

Che Mat, Ruzinoor and Mohamed Shariff, Abdul Rashid and Zulkifli, Abdul Nasir and Mohd Rahim, Mohd Shafry and Mahayudin, Mohd Hafiz (2015) Web based 3D terrain visualization using game engine. In: 5th International Conference on Computing and Informatics (ICOCI 2015), 11-13 Aug. 2015, Istanbul, Turkey. (pp. 254-260).

Djojodihardjo, Harijono (2015) Climate change creativity for cirrus clouds and contrails control. In: 2015 International Conference on Space Science and Communication (IconSpace), 10-12 Aug. 2015, Langkawi Lagoon Resort, Langkawi, Malaysia. (pp. 503-508).

Djojodihardjo, Harijono (2015) Simulation of rolling moment induced by various aircraft trailing vortices vortex models: review and analysis. In: 17th International Conference on Mathematical and Computational Methods in Science and Engineering (MACMESE '15), 23-25 Apr. 2015, Kuala Lumpur, Malaysia. (pp. 224-233).

Djojodihardjo, Harijono and Jafari, Mohammad (2015) Spill-over and uncertainty considerations in the active vibration suppression of elastic cantilevered beam. In: 17th International Conference on Mathematical and Computational Methods in Science and Engineering (MACMESE '15), 23-25 Apr. 2015, Kuala Lumpur, Malaysia. (pp. 214-223).

Ehsan, Abang Annuar and Mohd Arip, Mohd Ridzuan and Sohaimi, Muhammad Quyyum and Ghazi, Ibrahim and Abdul Aziz, Faieza (2015) Optical-based hardware encryption device for software protection. In: 4th International Conference on Computer Science and Computational Mathematics (ICCSCM 2015), 7-8 May 2015, Langkawi, Malaysia. (pp. 660-663).

Erman, Fuad Naim Ahmed and Ismail, Alyani and Raja Abdullah, Raja Syamsul Azmir and Alhawari, Adam Reda Hasan and Shabaneh, Arafat Abdallah Abdelwadod (2015) UHF RFID split-ring resonator tag antenna inductively coupled feed for metallic object. In: 2015 IEEE 12th Malaysia International Conference on Communications (MICC 2015), 23-25 Nov. 2015, Kuching, Sarawak, Malaysia. (pp. 74-76).

Faisal, Ali Raed and Hashim, Fazirulhisyam and Ismail, Mahamod and Noordin, Nor Kamariah (2015) On spectral efficiency maximization in a partial joint processing system using a multi-start particle swarm optimization algorithm. In: 2015 IEEE 12th Malaysia International Conference on Communications (MICC 2015), 23-25 Nov. 2015, Kuching, Sarawak, Malaysia. (pp. 288-293).

Fazli, Pardis and Che Man, Hasfalina and Mohamed Zawawi, Mohamed Azwan and Md. Shah, Umi Kalsom and Abdul Rahman, Nor'aini and Idris, Azni and Mohd Yusof, Mohd Rashid (2015) Rice cultivation system with less water consumption for sustainable future. In: 3rd International Conference on Water Resources (ICWR-2015), 24-25 Nov. 2015, Bayview Hotel, Langkawi, Kedah. .

Ferdosian, Nasim and Othman, Mohamed and Kweh, Yeah Lun and Mohd Ali, Borhanuddin (2015) QoS class-based proportional resource allocation for LTE downlink. In: 2015 IEEE Conference on Standards for Communications and Networking (CSCN), 28-30 Oct. 2015, Tokyo, Japan. (pp. 89-93).

Gadam, Mohammed Aliyu and Ahmed, Maryam Abdulazeez and Noordin, Nor Kamariah and Sali, Aduwati and Hashim, Fazirulhisyam (2015) Decentralized time domain muting for interference mitigation in LTE-advanced heterogeneous networks. In: 2015 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology (CSUDET 2015), 15-17 Oct. 2015, Selangor, Malaysia. (pp. 17-22).

Ghamarian, Nima and Mohamed Ariff, Azmah Hanim and Nahavandi, Mahdi and Zainal, Zulkarnain and Lim, Janet Hong Ngee (2015) Application of artificial neural network for optimization the wet contact angle for lead free Bi-Ag soldering alloys. In: INTROP Research Colloquim 2015, 1-2 Dec. 2015, RHR Hotel, Uniten, Putrajaya. .

Hajighorbani, Shahrooz and Mohd Radzi, Mohd Amran and Ab Kadir, Mohd Zainal Abidin and Shafie, Suhaidi (2015) Novel hybrid maximum power point tracking algorithm for PV systems under partially shaded conditions. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 June 2015, Kota Kinabalu, Sabah. .

Hamadani, Maral Faghani and Mohd Isa, Maryam and Hamidon, Mohd Nizar and Mazaheri, Amin (2015) A comparison between two different FPGA-based topologies of first order sigma-delta modulator. In: 2015 IEEE International Circuits and Systems Symposium (ICSyS 2015), 2-4 Sept. 2015, Holiday Villa Beach Resort & Spa, Langkawi, Kedah. (pp. 120-124).

Hanamoto, Tsuyoshi and Amino, M. and Toosi, Saman and Mailah, Nashiren Farzilah and Misron, Norhisam (2015) A three to five phase matrix converter for a stand-alone power supply including the PMSM motor drive system. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 60-62).

Hanamoto, Tsuyoshi and Misron, Norhisam and Toosi, Saman (2015) DDPWM-based power conversion system using three to four phase matrix converter for stand-alone power system. In: 41st Annual Conference of the IEEE Industrial Electronics Society (IECON 2015), 9-12 Nov. 2015, Yokohama, Japan. (004424-004429).

Hesamian, Mohammad Hesam and Mashohor, Syamsiah and Saripan, M. Iqbal and Wan Adnan, Wan Azizun and Hesamian, B. and Hooshyari, M. M. (2015) Performance of various training algorithms on scene illumination classification. In: 2015 IEEE Student Conference on Research and Development (SCOReD), 13-14 Dec. 2015, Berjaya Times Square Hotel, Kuala Lumpur, Malaysia. (pp. 66-71).

Ho, Lip Chin and Hanafi, Marsyita and Salka, Tanko Danial (2015) Integrated face and facial components detection. In: 2015 Seventh International Conference on Computational Intelligence, Modelling and Simulation (CIMSim 2015), 27-29 July 2015, Kuantan, Pahang, Malaysia. (pp. 87-91).

Ibrahim, Nur Syahirah and Sali, Aduwati and Mohamad, Mas Haslinda and Hashim, Shaiful Jahari (2015) Outage performance in relay-assisted overlay cognitive radio networks. In: 2015 IEEE 12th Malaysia International Conference on Communications (MICC 2015), 23-25 Nov. 2015, Kuching, Sarawak, Malaysia. (pp. 119-123).

Islam, Syed Zahurul and Mariun, Norman and Kah, Leong and Hizam, Hashim and Othman, Mohammad Lutfi and Zainal Abidin, Izham and Yap, Norman (2015) A novel Zigbee-based data acquisition system for distributed photovoltaic generation in smart grid. In: 2015 IEEE Innovative Smart Grid Technologies - Asia (ISGT ASIA), 3-6 Nov. 2015, Bangkok, Thailand. .

Islam, Syed Zahurul and Mariun, Norman and Othman, Mohammad Lutfi and Hizam, Hashim and Zainal Abidin, Izham and Toudeshki, Arash (2015) Ambient temperature effect on Amorphous Silicon (A-Si) Photovoltaic module using sensing technology. In: 9th International Conference on Sensing Technology, 8-10 Dec. 2015, Auckland, New Zealand. (pp. 235-241).

Ismail, Noor Faezah and Sulaiman, Nasri and Md Yunus, Nurul Amziah (2015) Drop impact testing for Pb-freee aloy on IC packaging. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 288-290).

Jalalian, Afsaneh and Mashohor, Syamsiah and Mahmud, Rozi and Saripan, M. Iqbal and Ramli, Abdul Rahman and Bahari, Norafida and Suppiah, Subapriya and Karasfi, Babak (2015) 3D reconstruction for volume of interest in computed tomography laser mammography images. In: 2015 IEEE Student Symposium in Biomedical Engineering & Sciences (ISSBES 2015), 4 Nov. 2015, UiTM Shah Alam, Selangor. (pp. 16-20).

Jalo, Abdulmumini Salihu and Ishak, Asnor Juraiza and Che Soh, Azura and Abdul Rahman, Ribhan Zafira and Shamsudin, Rosnah (2015) Optimizing effect of frying cycles on cooking oil properties using particle swarm optimization. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 June 2015, Kota Kinabalu, Sabah. .

Jamaluddin, Nurul Fauzani and Ahmad, Siti Anom and Mohd Noor, Samsul Bahari and Wan Hasan, Wan Zuha and Yaacob, Azhar and Adam, Yunus (2015) Performance of DWT and SWT in muscle fatigue detection. In: 2015 IEEE Student Symposium in Biomedical Engineering & Sciences (ISSBES 2015), 4 Nov. 2015, UiTM Shah Alam, Selangor. (pp. 50-53).

Jamaluddin, Nurul Fauzani and Ahmad, Siti Anom and Mohd Noor, Samsul Bahari and Wan Hasan, Wan Zuha and Yaacob, Azhar and Adam, Yunus and Md. Ali, Sawal Hamid (2015) Amplitude and frequency changes in surface EMG of biceps femoris during five days Bruce Protocol treadmill test. In: 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2015), 25-29 Aug. 2015, Milano, Italy. (pp. 6219-6222).

Jamaludin, Farah Adilah and Abd Rahman, Muhammad Syahmi and Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Azis, Norhafiz and Jasni, Jasronita (2015) Considering the effects of a cross-arm on a contaminated polymer insulator at different angles. In: 2015 IEEE Conference on Energy Conversion (CENCON), 19-20 Oct. 2015, Johor Bahru, Malaysia. (pp. 263-267).

Jumaah, Fawaz Mohammed and Daas, Sreedharan Baskara and Mohd Sidek, Roslina and Rokhani, Fakhrul Zaman (2015) PrimeTime web-based report analyzer (PTWRA) tool. In: 6th Asia Symposium on Quality Electronic Design (ASQED 2015), 4-5 Aug. 2015, MIDA Sentral, Kula Lumpur, Malaysia. (pp. 203-208).

Kadim, E. J. and Hee, C. F. and Azis, Norhafiz and Jasni, Jasronita and Ahmad, S. A. and Ab Kadir, Mohd Zainal Abidin (2015) Dissolved gas analysis of transformers based on rough set and fuzzy logic methods. In: 2015 IEEE Conference on Energy Conversion (CENCON), 19-20 Oct. 2015, Johor Bahru, Malaysia. (pp. 268-271).

Kamsani, Noor Ain and Thangasamy, Veeraiyah and Bukhori, Muhammad Faiz and Shafie, Suhaide (2015) A multiband 130nm CMOS low noise amplifier for LTE bands. In: 2015 IEEE International Circuits and Systems Symposium (ICSyS 2015), 2-4 Sept. 2015, Holiday Villa Beach Resort & Spa, Langkawi, Kedah. (pp. 106-110).

Kamsani, Noor Ain and Thangasamy, Veeraiyah and Bukhori, Muhammad Faiz and Shafie, Suhaide (2015) A multiband 130nm CMOS second order band pass filter for LTE bands. In: 2015 IEEE International Circuits and Systems Symposium (ICSyS 2015), 2-4 Sept. 2015, Holiday Villa Beach Resort & Spa, Langkawi, Kedah. (pp. 100-105).

Kamsani, Noor Ain and Thangasamy, Veeraiyah and Hashim, Shaiful Jahari and Yusoff, Zubaida and Bukhori, Muhammad Faiz and Hamidon, Mohd Nizar (2015) A low power multiplexer based pass transistor logic full adder. In: 2015 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2015), 19-21 Aug. 2015, Primula Beach Hotel, Kuala Terengganu. .

Kamuri, Mohd Firdaus and Zainal Abidin, Zurina and Md Yunus, Nurul Amziah and Hamidon, Mohd Nizar and Yaacob, Mohd Hanif and Kamarudin, Suryani and Mohd Zhukhi, Siti Zalikha (2015) Optimization on the preparation of microfluidic channel using dry film resist. In: 2015 International Conference on Smart Sensors and Application (ICSSA 2015), 26-28 May 2015, Kuala Lumpur, Malaysia. (pp. 11-15).

Kazemian, Mohsen and Varahram, Pooria and Mohd Ali, Borhanuddin and Mohammady, Somayeh (2015) A low complexity PAPR reduction scheme based on radix-II IFFT. In: 2015 IEEE International Conference on Consumer Electronics (ICCE), 9-12 Jan. 2015, Las Vegas, Nevada, United States. (pp. 420-421).

Khan, Bahadur Shah and Hanafi, Marsyita and Mashohor, Syamsiah (2015) Automated road marking detection system for autonomous car. In: 2015 IEEE Student Conference on Research and Development (SCOReD), 13-14 Dec. 2015, Berjaya Times Square Hotel, Kuala Lumpur, Malaysia. (pp. 398-401).

Kormin, Shaharuddin and Abdan, Khalina and Wahab, Md. Saidin (2015) Physical and tensile properties of treated/untreated kenaf fiber and pineapple leaf fiber. In: INTROP Research Colloquim 2015, 1-2 Dec. 2015, RHR Hotel, Uniten, Putrajaya. .

Kumo, Mohammed Saidu and Mariun, Norman and Mohd Radzi, Mohd Amran and Abdul Wahab, Noor Izzri and Lurwan, Sabo Mahmoud (2015) Evaluation of the effects of photovoltaic inverter controllers on grid injected power with local dynamic loads. In: 2015 IEEE Innovative Smart Grid Technologies - Asia (ISGT ASIA), 3-6 Nov. 2015, Bangkok, Thailand. .

Lee, Chu Liang and Mohd Sidek, Roslina and Rokhani, Fakhrul Zaman and Sulaiman, Nasri (2015) A low power bandgap voltage reference for low-dropout regulator. In: 2015 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2015), 19-21 Aug. 2015, Primula Beach Hotel, Kuala Terengganu. .

Lee, Siao Ping and Ng, Chee Kyun and Mokhtar, Makhfudzah (2015) A novel error correction scheme in quantum key distribution (QKD) protocol. In: 40th Meeting of the Asia-Pacific Advanced Network, 10-14 Aug. 2015, University of Malaya, Kuala Lumpur. (pp. 50-56).

Liew, Jiun Terng and Hashim, Fazirulhisyam (2015) QoS provisioning in CSMA/CA-based opportunistic random access for WLAN. In: 2015 IEEE 12th Malaysia International Conference on Communications (MICC 2015), 23-25 Nov. 2015, Kuching, Sarawak, Malaysia. (pp. 333-338).

Lim, Jin Wei and Chew, L. H. and Choong, Thomas Shean Yaw and Cionita, Tezara and Yazdi, Mohammad Hossein (2015) Overview of steel slag application and utilization. In: 3rd International Conference on Mechanical Engineering Research (ICMER 2015), 18-19 Aug. 2015, Kuantan, Pahang, Malaysia. (pp. 1-5).

Lim, Yang Wei and Daas, Sreedharan Baskara and Hashim, Shaiful Jahari and Mohd Sidek, Roslina and Kamsani, Noor Ain and Rokhani, Fakhrul Zaman (2015) Reduced hardware architecture for energy-efficient IoT healthcare sensor nodes. In: 2015 IEEE International Circuits and Systems Symposium (ICSyS 2015), 2-4 Sept. 2015, Holiday Villa Beach Resort & Spa, Langkawi, Kedah. (pp. 90-95).

Lutfy, Omar Farouq and Selamat, Hazlina and Mohd Noor, Samsul Bahari (2015) Modelling of a conveyor-belt grain dryer utilizing a sigmoid network. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 June 2015, Kota Kinabalu, Sabah. .

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Salim, M. A. and Akop, Mohd Zaid and Tahir, M. M. (2015) Modeling of kenaf reinforced sugar palm starch biocomposites mechanical behaviour using Halpin-Tsai model. In: 13th International Conference on Environment, Ecosystems and Development (EED '15), 23-25 Apr. 2015, Kuala Lumpur, Malaysia. (pp. 94-99).

Mat Hussin, Nur Liyana and Mohamed Ariff, Azmah Hanim and Sulaiman, Shamsuddin and Osman, Saliza Azlina (2015) Potential enhancement in mechanical and physical properties of Sn-Ag-Cu lead free solder as a replacement material for Sn-Pb in electronic packaging. In: INTROP Research Colloquim 2015, 1-2 Dec. 2015, RHR Hotel, Uniten, Putrajaya. .

Mat Jusoh, Suriani and Ali, Aidy and Abdan, Khalina and Salit, Mohd Sapuan and Haftirman (2015) Fatigue life estimation of bio-composite materials. In: 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 Apr. 2015, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia. (pp. 832-836).

Mat Nong, Mohd Ali and Adam, Nor Mariah and Abdul Rashid, Suraya and Md Yusof, Juraina and Abdul Rashid, Roslina (2015) Design of dish concentrator based on materials and geometry for hot humid weather. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 26-28).

Mat Nong, Mohd Ali and Osman, Rosiah and Md Yusof, Juraina and Mohd Sidek, Roslina (2015) Real time motorcycle image detections on field programmable gate array. In: 2015 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2015), 19-21 Aug. 2015, Primula Beach Hotel, Kuala Terengganu. .

Mazaheri, Amin and Mohd Isa, Maryam and Mohd Sidek, Roslina and Yusof, Nor Azah (2015) An embedded processing of differential pulse voltammetry (DPV) data using ARM processor (LPC1768). In: 2015 IEEE International Circuits and Systems Symposium (ICSyS 2015), 2-4 Sept. 2015, Holiday Villa Beach Resort & Spa, Langkawi, Kedah. (pp. 80-84).

Md Sallah, Siti Sarah and Md. Ali, Sawal Hamid and N V Visvanathan, P. Susthitha Menon and Islam, Md. Shabiul and Juhari, Nurjuliana and Ahmad, Siti Anom (2015) Investigation on optical interconnect(OI) link performance using external modulator. In: 2015 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2015), 19-21 Aug. 2015, Primula Beach Hotel, Kuala Terengganu. .

Md Yusof, Juraina and Mohd Salleh, Mohamad Amran and Abdul Rashid, Suraya and Ismail, Ismayadi and Mat Nong, Mohd Ali (2015) Carbon particles (CPs) derived from dry milled biochar. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 21-22).

Md. Yusoff, Nelidya and Mohd Sharif, Nurhanis and Sulaiman, Abdul Hadi and Mahdi, Mohd Adzir (2015) Investigation on the signal performances of pre-, post- and inline compensation of L-band dispersion compensator using chirped fiber Bragg grating. In: 1st International Conference on Telematics and Future Generation Networks (TAFGEN 2015), 26-28 May 2015, Kuala Lumpur, Malaysia. (pp. 107-110).

Mehrjou, Mohammad Rezazadeh and Mariun, Norman and Karami, Mahdi and Misron, Norhisam and Mohd Radzi, Mohd Amran (2015) Broken rotor bar detection in LS-PMSMs based on statistical features analysis of start-up current envelope. In: 2015 IEEE 3rd International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2015), 24-25 Nov. 2015, Putrajaya, Malaysia. .

Mehrjou, Mohammad Rezazadeh and Mariun, Norman and Karami, Mahdi and Misron, Norhisam and Mohd Radzi, Mohd Amran (2015) Statistical features analysis of transient current signal for broken bars fault detection in LS-PMSMs. In: 2015 IEEE 3rd International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2015), 24-25 Nov. 2015, Putrajaya, Malaysia. .

Mehrjou, Mohammad Rezazadeh and Mariun, Norman and Karami, Mahdi and Misron, Norhisam and Mohd Radzi, Mohd Amran (2015) Wireless sensors system for broken rotor bar fault monitoring using wavelet analysis. In: 4th International Conference on Electronic Devices, Systems and Applications (ICEDSA), 14–15 Sept. 2015, Hotel Istana, Kuala Lumpur, Malaysia. (pp. 1-10).

Mehrjou, Mohammad Rezazadeh and Mariun, Norman and Misron, Norhisam and Mohd Radzi, Mohd Amran (2015) A survey of broken rotor bar detection using PT and HT in squirrel cage electrical machine. In: 2015 IEEE Student Conference on Research and Development (SCOReD), 13-14 Dec. 2015, Berjaya Times Square Hotel, Kuala Lumpur, Malaysia. (pp. 506-510).

Misron, Norhisam and Roslan, Muhammad Kamel and Aris, Ishak and Hamidon, Mohd Nizar and Tashiro, Kunihisa (2015) Development of magnetic imaging system using giant magnetoresistive (GMR) sensor. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 240-242).

Moh, Abdul Nasser A. and Mohd Ali, Borhanuddin (2015) Optimum QoS resource allocation algorithm for video traffic over wireless mesh networks based on IEEE 802.11s. In: 2015 IEEE 12th Malaysia International Conference on Communications (MICC 2015), 23-25 Nov. 2015, Kuching, Sarawak, Malaysia. (pp. 102-106).

Mohamad, Ahmad Syukri and Mariun, Norman (2015) Voltage notch analysis of a taps-based multilevel inverter in the event of one switch failure. In: 2015 IEEE 3rd International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2015), 24-25 Nov. 2015, Putrajaya, Malaysia. .

Mohamad, Farhana and Amat Sairin, Masyitah and Ahmad Nizar, Nina Naquiah and Abd Aziz, Samsuzana and Mat Hashim, Dzulkifly and Misbahulmunir, Syahiduddin and Rokhani, Fakhrul Zaman (2015) Investigation on interdigitated electrode design for impedance spectroscopy technique targeting lard detection application. In: 2015 9th International Conference on Sensing Technology (ICST), 8-10 Dec. 2015, Auckland, New Zealand. (pp. 739-744).

Mohamad, Mas Haslinda and Sali, Aduwati and Ibrahim, Nur S. and Hashim, Fazirulhisyam and Nordin, Rosdiadee (2015) Temporal evaluation of secondary user interference to primary user in cognitive radio networks. In: 2015 IEEE Student Conference on Research and Development (SCOReD), 13-14 Dec. 2015, Berjaya Times Square Hotel, Kuala Lumpur, Malaysia. (pp. 565-570).

Mohamad, Roslina and Harun, Harlisya and Mokhtar, Makhfudzah and Wan Adnan, Wan Azizun and Dimyati, Kaharudin (2015) On the robustness of measurement of reliability stopping criterion in turbo iterative decoding. In: 2015 IEEE/ACIS 16th International Conference on Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing (SNPD), 1-3 June 2015, Takamatsu, Japan. .

Mohamad Anil Shah, Nurul Syazrina and Abdul Karim, Hezerul and Ahmad Fauzi, Mohammad Faizal and Mohd Arif, Nor Azhar and Sali, Aduwati (2015) Evaluation of further reduced resolution depth coding for stereoscopic 3D video. In: 2015 IEEE International Conference on Signal and Image Processing Applications (ICSIPA 2015), 19-21 Oct. 2015, Pullman Bangsar, Kuala Lumpur, Malaysia. (pp. 361-366).

Mohamad Deros, Siti Noratiqah and Asmat, Arnis and Mansor, Shattri (2015) Modification of wavelet transform approach for low-wind direction extraction. In: 2015 IEEE International Conference on Aerospace Electronics and Remote Sensing (ICARES 2015), 3-5 Dec. 2015, Discovery Kartika Plaza Hotel, Bali, Indonesia. .

Mohamad Radzi, Nur Fadzilah and Che Soh, Azura and Mohamad Yusof, Umi Kalsom and Hassan, Mohd Khair and Khamis, Shamsul (2015) Pattern analysis using principle component analysis (PCA) method for herbs identification. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. .

Mohamad Radzi, Nur Fadzilah and Che Soh, Azura and Mohamad Yusof, Umi Kalsom and Ishak, Asnor Juraiza and Hassan, Mohd Khair and Ahmad, Siti Anom and Khamis, Shamsul (2015) Evaluation of PCA in herbs identification. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 15-18).

Mohamad Rashidi, Fairuz Rizal and Alwan, Omar Hussein and Wan Hasan, Wan Zuha (2015) Investigation on developing of a piezoresistive pressure sensor for foot plantar measurement system. In: 2015 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2015), 19-21 Aug. 2015, Primula Beach Hotel, Kuala Terengganu. .

Mohamad Yusof, Umi Kalsom and Che Soh, Azura and Ishak, Asnor Juraiza and Hassan, Mohd Khair and Khamis, Shamsul (2015) Development of electronic nose for classification of medicinal aromatic herbs using artificial intelligent techniques. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 3-4).

Mohamad Yusof, Umi Kalsom and Che Soh, Azura and Ishak, Asnor Juraiza and Hassan, Mohd Khair and Khamis, Shamsul (2015) Implementation of moving average technique in data mining for signal pre-processing in electronic nose system. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 1-2).

Mohamad Zaber, Nursaida and Ishak, Asnor Juraiza and Che Soh, Azura and Hassan, Mohd Khair (2015) Performance analysis between PID and fuzzy logic controller in position control system of radio telescope. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 364-365).

Mohamad Zaber, Nursaida and Ishak, Asnor Juraiza and Che Soh, Azura and Hassan, Mohd Khair and Zainal Abidin, Z. (2015) Designing PID controller for position control with disturbance. In: 2nd International Conference on Computer, Communications, and Control Technology (I4CT 2015), 21-23 Apr. 2015, Kuching, Sarawak, Malaysia. (pp. 404-407).

Mohamed Rawi, Iryani and Ab Kadir, Mohd Zainal Abidin (2015) Investigation on the 132kV overhead lines lightning-related flashovers in Malaysia. In: 2015 International Symposium on Lightning Protection (XIII SIPDA), 28 Sept.-2 Oct. 2015, Balneario Camboriu, Brazil. (pp. 239-243).

Mohammed, Haydar Imad and Hashim, Fazirulhisyam and Che Ujang, Che Ahmad Bukhari (2015) Modeling of widely-linear quaternion valued systems using hypercomplex algorithms. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 June 2015, Kota Kinabalu, Sabah. .

Mohd Aris, Teh Noranis and Hamdan, Hazlina and Che Pa, Noraini and Nazeer, Shahrin Azuan (2015) An agent-based ontology fuzzy logic conceptual model for flood warning prediction. In: Academics World 12th International Conference, 20 Dec. 2015, Singapore. (pp. 36-39).

Mohd Husin, Ezrin and Wayayok, Aimrun and Bejo, Siti Khairunniza and Mahadi @ Othman, Muhammad Razif (2015) Relationship between soil apparent electrical conductivity and soil nutrient of Jawa series in oil palm plantation. In: 7th International Conference on Sustainable Agriculture for Food, Energy and Industry in Regional and Global Context (ICSAFEI 2015), 25-27 Aug. 2015, Faculty of Engineering, Universiti Putra Malaysia. (pp. 1-6).

Mohd Najib, Mohamad Aznan and Mohamed Ariff, Azmah Hanim and Mohd Tahir, Suraya and As'arry, Azizan (2015) Rice husk ash reinforcement in alumina : a review on mechanical and microstructural properties. In: INTROP Research Colloquim 2015, 1-2 Dec. 2015, RHR Hotel, Uniten, Putrajaya. .

Mohd Najib, Mohamad Aznan and Mohamed Ariff, Azmah Hanim and Roslan, Muhammad Raimi and Anuar, Muhammad Azrol Amin (2015) Intermetallic growth of SAC237 solder paste reinforced with 0.01wt.% multi-walled carbon nanotubes. In: INTROP Research Colloquim 2015, 1-2 Dec. 2015, RHR Hotel, Uniten, Putrajaya. .

Mohd Noh, Zarina and Ramli, Abdul Rahman and Hanafi, Marsyita and Saripan, M. Iqbal (2015) Acquiring palm vein patterns for visual interpretation. In: 2015 2nd International Conference on Biomedical Engineering (ICoBE), 30-31 Mar. 2015, Penang, Malaysia. (pp. 1-5).

Mohd Noh, Zarina and Ramli, Abdul Rahman and Hanafi, Marsyita and Saripan, M. Iqbal (2015) Palm vein pattern recognition using spatial image processing. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 5-7).

Mohd Noh, Zarina and Ramli, Abdul Rahman and Saripan, M. Iqbal and Hanafi, Marsyita (2015) Assessment of near infrared LED radiation pattern using Otsu thresholding. In: 2015 IEEE Student Symposium in Biomedical Engineering & Sciences (ISSBES 2015), 4 Nov. 2015, UiTM Shah Alam, Selangor. (pp. 1-6).

Mohd Noor, Norul Uyuun and Abdul Karim, Hezerul and Mohd Arif, Nor Azhar and Abdullah, Mohd Haris Lye and Sali, Aduwati (2015) Multi-view video plus depth representation with saliency depth video. In: 1st Asia Pacific Conference on Multimedia and Broadcasting (APMediaCast2015), 23-25 Apr. 2015, Bali, Indonesia. (pp. 121-126).

Mohd Nor, Shamsul Fahmi and Azis, Norhafiz and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Yunus, Robiah and Ishak, Mohd Taufiq and Yaakub, Zaini (2015) A study on the AC breakdown voltages of as-received palm oil and coconut oil under presence of TiO2. In: 2015 IEEE Conference on Energy Conversion (CENCON), 19-20 Oct. 2015, Johor Bahru, Malaysia. (pp. 354-357).

Mohd Pisal, Siti Maisarah and Aris, Ishak and Sahari, Mohamad Madani and Cho, Chee Seng and Bukhari, Shahrul Nizam and Mansor, Nor Faiza and Mohd Munir, Mohd Firdaaus (2015) Moving towards sustainable human capital development for Malaysian automotive industry. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 June 2015, Kota Kinabalu, Sabah. .

Mohd Sharif, Syahira and Abu Bakar, Noor Fitrah and Naim, Mohd Nazli and Abd Rahman, Norazah and Abdul Talib, Suhaimi (2015) Electrophoretic deposition of adsorbed arsenic on fine iron oxide particles in tap water. In: 6th Nanoscience and Nanotechnology Symposium (NNS 2015), 4-5 Nov. 2015, Surakarta, Indonesia. (pp. 1-6).

Mok, Li Suet and Ng, Chee Kyun and Noordin, Nor Kamariah (2015) Linear multi-hop amplify-and-forward (AF) cooperative relay channels. In: 40th Meeting of the Asia-Pacific Advanced Network, 10-14 Aug. 2015, University of Malaya, Kuala Lumpur. (pp. 64-69).

Morad, Noor Azian and Aris, Nor Ilia Anisa and Iwai, Yoshio and Ismail, Mohd Halim Shah (2015) Optimization of accelerated water extraction for ginger bioactive compounds. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 June 2015, Kota Kinabalu, Sabah. .

Muhammad Chatib Quzwain, Kamelia and Ismail, Alyani and Sali, Aduwati and Alhawari, Adam Reda Hasan (2015) Gain enhancement of octagon microstrip Yagi antenna utilizing 1-D photonic crystal (PCs) cover. In: International Conference on Electrical Engineering, Computer Science and Informatics (EECSI 2015), 19-20 Aug. 2015, Palembang, Indonesia. (pp. 194-198).

Muhammad Rashid, Raizal Saifulnaz and M. H., Azmi and Aboutaha, Riyad and P., Alireza (2015) Effects of temperature on the CFRP confining pressure in strengthened concrete columns. In: Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015), 14-16 Dec. 2015, Nanjing, China. .

Muhammed, Hadi Hamaaziz and Kamal, Md. Rowshon (2015) Hydraulic characteristics of capillary wick irrigation system. In: 7th International Conference on Sustainable Agriculture for Food, Energy and Industry in Regional and Global Context (ICSAFEI 2015), 25-27 Aug. 2015, Faculty of Engineering, Universiti Putra Malaysia. (pp. 1-15).

Musaddiq, Arslan and Hashim, Fazirulhisyam (2015) Multi-hop wireless network modelling using OMNET++ simulator. In: 2nd International Conference on Computer, Communications, and Control Technology (I4CT 2015), 21-23 Apr. 2015, Kuching, Sarawak, Malaysia. (pp. 559-564).

Mustapha, Ibrahim and Mohd Ali, Borhanuddin and A. Rasid, Mohd Fadlee and Sali, Aduwati and Mohamad, Hafizal (2015) A weighted hard combination scheme for cooperative spectrum sensing in cognitive radio sensor networks. In: 2015 IEEE 12th Malaysia International Conference on Communications (MICC 2015), 23-25 Nov. 2015, Kuching, Sarawak, Malaysia. (pp. 12-17).

Mustapha Kamil, Yasmin and Mustapa, Mohd Azmir and Abu Bakar, Muhammad Hafiz and Musa, Baktiar and Amir Hamzah, Amir Syahir and Yaacob, Mohd Hanif and Mahdi, Mohd Adzir (2015) Refractive index sensor with asymmetrical tapered fiber based on evanescent field sensing. In: 2015 IEEE International Broadband and Photonics Conference (IBP), 23-25 Apr. 2015, Bali, Indonesia. (pp. 35-39).

Nakhaeinia, Danial and Payeur, Pierre and Tang, Sai Hong and Karasfi, Babak (2015) A hybrid control architecture for autonomous mobile robot navigation in unknown dynamic environment. In: 2015 IEEE International Conference on Automation Science and Engineering (CASE), 24-28 Aug. 2015, Gothenburg, Sweden. (pp. 1274-1281).

Nicodemus, Kure and Hamidon, Mohd Nizar and Azhari, Saman and Usman, Kamilu Iman and Hasan, Intan Helina and Ismail, Ismayadi (2015) Synthesis of carbon nanotubes using microwave oven. In: 2015 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2015), 19-21 Aug. 2015, Primula Beach Hotel, Kuala Terengganu. .

Nik Daud, Nik Norsyahariati and Abdul Jalil, Falil Nisa and Sadiq, Muhammed Abubakar and Abd. Ghafar Azmi, Juliana (2015) Influence of agricultural wastes on shear strength properties of soil. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2015), 1-2 Dec. 2015, Melaka, Malaysia. (pp. 1-7).

Nik Daud, Nik Norsyahariati and Ismail, Farhana (2015) Aged refuse as a medium to remediate leachate contaminated by heavy metals. In: 2015 International Conference on Energy, Environment and Chemical Engineering (ICEECE 2015), 28-29 June 2015, Bangkok, Thailand. (pp. 13-18).

Nik Daud, Nik Norsyahariati and Izehar, Nur Hazwani (2015) Assessment and treatment of groundwater in Selangor area: unconfined and confined aquifer. In: 3rd International Conference on Water Resources (ICWR-2015), 24-25 Nov. 2015, Bayview Hotel, Langkawi, Kedah. .

Nik Daud, Nik Norsyahariati and Kam, Ru Hui and Abd. Ghafar Azmi, Juliana (2015) The effect of soil particle arrangement on shear strength behavior of silty sand. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2015), 1-2 Dec. 2015, Melaka, Malaysia. (pp. 1-7).

Radzali, R. and Mustapha Kamil, Yasmin and Mahdi, Mohd Adzir and Abu Bakar, Muhammad Hafiz (2015) Asymmetric fiber taper for temperature sensing applications. In: 2015 IEEE International Broadband and Photonics Conference (IBP), 23-25 Apr. 2015, Bali, Indonesia. (pp. 76-81).

Rahimipour, Somayeh and Flayyih, Wameedh Nazar and Kamsani, Noor Ain and Stan, Mircea and Rokhani, Fakhrul Zaman (2015) Investigating the impact of on-chip interconnection noise on dynamic thermal management efficiency. In: 2015 IEEE International Circuits and Systems Symposium (ICSyS 2015), 2-4 Sept. 2015, Holiday Villa Beach Resort & Spa, Langkawi, Kedah. (pp. 85-89).

Rahimipour, Somayeh and Flayyih, Wameedh Nazar and Kamsani, Noor Ain and Stan, Mircea and Rokhani, Fakhrul Zaman (2015) Investigating the impact of on-chip interconnection noise on dynamic thermal management efficiency. In: 11th Conference on Ph.D. Research in Microelectronics and Electronics (PRIME 2015), 29 June-2 July 2015, Glasgow, United Kingdom. (pp. 117-120).

Rahman, Ziaur and Hashim, Fazirulhisyam and Othman, Mohamed and A. Rasid, Mohd Fadlee (2015) Reliable and energy efficient routing protocol (REEP) for underwater wireless sensor networks (UWSNs). In: 2015 IEEE 12th Malaysia International Conference on Communications (MICC 2015), 23-25 Nov. 2015, Kuching, Sarawak, Malaysia. (pp. 24-29).

Raja Abdullah, Raja Syamsul Azmir and Mohd Ali, Azizi and Abdul Rashid, Nur Emileen (2015) Stationary object detection in forward scattering radar. In: IET International Radar Conference 2015, 14-16 Oct. 2015, Hangzhou, China. .

Raja Abdullah, Raja Syamsul Azmir and Salah, Asem Ahmad and Ismail, Alyani and Hashim, Fazirulhisyam and Abdul Aziz, Noor Hafizah and Abdul Rashid, Nur Emileen (2015) Ground moving target detection using LTE-based passive radar. In: 2015 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET 2015), 5-7 Oct. 2015, Aston Tropicana Hotel, Bandung, Indonesia. (pp. 70-75).

Ramalu, Tanaselan and Mohd Radzi, Mohd Amran and Mohd Zainuri, Muhammad Ammirrul Atiqi and Abdul Wahab, Noor Izzri and Abdul Rahman, Ribhan Zafira (2015) Dual-fuzzy based MPPT for dual-load operation with photovoltaic SEPIC converter. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 June 2015, Kota Kinabalu, Sabah. .

Ramli, A. and Ismail, Alyani and Alhawari, Adam Reda Hasan and Mahdi, Mohd Adzir and Ramli, Azlinda (2015) Metamaterial superstrate effects to the stacked bandpass filter bowtie antenna performances. In: 2015 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET 2015), 5-7 Oct. 2015, Aston Tropicana Hotel, Bandung, Indonesia. (pp. 32-35).

Renny Eka Putri, and Yahya, Azmi and Adam, Nor Mariah and Abd Aziz, Samsuzana (2015) Comparing instantaneous yield from combine yield monitor against crop cut test estimated yield. In: 7th International Conference on Sustainable Agriculture for Food, Energy and Industry in Regional and Global Context (ICSAFEI 2015), 25-27 Aug. 2015, Faculty of Engineering, Universiti Putra Malaysia. (pp. 1-12).

Romli, Fairuz Izzuddin and Dasuki, Norhafizah and Harmin, Mohammad Yazdi (2015) Market potential study for standing cabin concept for domestic low-cost commercial airlines in Malaysia. In: 3rd International Conference on Geological, Geographical, Aerospace and Earth Science 2015, 26–27 Sept. 2015, DoubleTree Hilton, Jakarta, Indonesia. (pp. 1-6).

Saadon, Zaid Kh. and Salim, Ghassan Maan and Omotoso, O. A. and Abdul Aziz, Faieza (2015) A review of robotics application in manufacturing industry. In: 4th International Conference on Computer Science and Computational Mathematics (ICCSCM 2015), 7-8 May 2015, Langkawi, Malaysia. (pp. 697-701).

Sabow, Azad Behnan and Sazili, Awis Qurni and Idrus, Zulkifli and Goh, Yong Meng and Ab Kadir, Mohd Zainal Abidin and Adeyemi, Kazeem Dauda (2015) Meat quality assessment in goats subjected to conscious halal slaughter and slaughter following minimal anaesthesia. In: 5th International Conference on Sustainable Animal Agriculture for Developing Countries (SAADC 2015), 27-30 Oct. 2015, Dusit Thani Pattaya Hotel, Thailand. (pp. 722-725).

Sabry, Ahmad H. and Wan Hasan, Wan Zuha and Ab Kadir, Mohd Zainal Abidin and Mohd Radzi, Mohd Amran and Shafie, Suhaidi (2015) Power consumption and size minimization of a wireless sensor node in automation system application. In: 2015 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2015), 19-21 Aug. 2015, Primula Beach Hotel, Kuala Terengganu. .

Said, Yunusa Ali and Marhaban, Mohammad Hamiruce and Ahmad, Siti Anom and Ramli, Abd Rahman (2015) Improved SIFT algorithm for place categorization. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 June 2015, Kota Kinabalu, Sabah. .

Salih, Rabar Fatah and Abdan, Khalina and Wayayok, Aimrun and Hashim, Norhashila (2015) Improvement of morphological properties of kenaf (Hibiscus cannabinus L.) by adding nutrients. In: 7th International Conference on Sustainable Agriculture for Food, Energy and Industry in Regional and Global Context (ICSAFEI 2015), 25-27 Aug. 2015, Faculty of Engineering, Universiti Putra Malaysia. (pp. 1-7).

Salihu, Mustafa Shehu and Misron, Norhisam and Othman, Mohammad Lutfi and Mariun, Norman and Hanamoto, Tsuyoshi (2015) A double stator permanent magnet generator integrated with novel magnetic gear. In: 3rd International Symposium on Applied Engineering and Sciences (SAES2015), 23-24 Nov. 2015, Universiti Putra Malaysia. (pp. 8-9).

Salman, Mustafa Ismael and Abdulhasan, Muntadher Qasim and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin and Sali, Aduwati and Ng, Chee Kyun (2015) An adaptive threshold based CQI compression scheme for LTE cellular networks. In: 40th Meeting of the Asia-Pacific Advanced Network, 10-14 Aug. 2015, University of Malaya, Kuala Lumpur. (pp. 85-90).

Salman, Suhad D. and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Cardona, Francisco (2015) Influence of resin system on the energy absorption capability and morphological properties of plain woven kenaf composites. In: 3rd International Conference of Mechanical Engineering Research (ICMER 2015), 18–19 Aug. 2015, Zenith Hotel, Kuantan, Pahang. (pp. 1-8).

Samsuddin, Mohd Zuwairi and Muhammad Rashid, Raizal Saifulnaz and Aboutaha, Riyad (2015) Axial strength of CFRP strengthened concrete columns under elevated humid environments. In: Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015), 14-16 Dec. 2015, Nanjing, China. .

Sanyang, Muhammed Lamin and Salit, Mohd Sapuan and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and Japar, Sahari (2015) Effect of glycerol and sorbitol plasticizers on physical and thermal properties of sugar palm starch based films. In: 13th International Conference on Environment, Ecosystems and Development (EED '15), 23-25 Apr. 2015, Kuala Lumpur, Malaysia. (pp. 157-162).

Selvadurai, Dinaagaren and Mohd Sidek, Roslina and Varahram, Pooria and Mohd Ali, Borhanuddin (2015) A robust non-uniform indexation of a quadratically interpolated LUT predistorter for RF power amplifiers. In: 2015 IEEE 12th Malaysia International Conference on Communications (MICC 2015), 23-25 Nov. 2015, Kuching, Sarawak, Malaysia. (pp. 329-332).

Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Mohamed Ariff, Azmah Hanim (2015) Monotonic and fatigue properties of kenaf /glass hybrid composites under fully reversed cyclic loading. In: 3rd International Conference of Mechanical Engineering Research (ICMER 2015), 18–19 Aug. 2015, Zenith Hotel, Kuantan, Pahang. (pp. 1-8).

Sim, Guan Ling and Hamidon, Mohd Nizar and Yunusa, Zainab (2015) Relation of parallel resistance to the passive double SAW resonator. In: 2015 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2015), 19-21 Aug. 2015, Primula Beach Hotel, Kuala Terengganu. .

Sobri, Shafreeza and Jasni, Jasronita and Md. Yasin, Faizah and Jamal, Siti Hasnawati and Janudin, Nurjahirah and Mohd Kasim, Noor Azilah (2015) Synthesis of carbon nanotubes and volatile organic compounds detection. In: 2015 2nd International Conference on Chemical and Material Engineering (ICCME 2015), 27-28 Dec. 2015, Phuket, Thailand. (pp. 1-4).

Sobri, Shafreeza and Rahim, Norin Hafizah (2015) Inhibitive effect of Cocon nucifera L. (coconut pulp) extract on mild steel acid corrosion. In: 28th Symposium of Malaysian Chemical Engineers (SOMChE 2015), 21-22 Oct. 2015, Palm Garden Hotel, IOI Resort, Putrajaya, Malaysia. (pp. 77-82).

Sulaiman, Abdul Hadi and Abu Bakar, Muhammad Hafiz and Hitam, Salasiah and Mahdi, Mohd Adzir and Md. Yusoff, Nelidya (2015) Multiwavelength SOA fiber ring laser based on bidirectional Lyot filter. In: 1st International Conference on Telematics and Future Generation Networks (TAFGEN 2015), 26-28 May 2015, Kuala Lumpur, Malaysia. (pp. 95-98).

Talib, Dayang Nurul Nahar and Shafie, Suhaidi and Hamidon, Mohd Nizar and Ahmad, Fauzan (2015) An improved readout topology of resistive sensor array for reduced measurement error. In: 2015 IEEE International Circuits and Systems Symposium (ICSyS 2015), 2-4 Sept. 2015, Holiday Villa Beach Resort & Spa, Langkawi, Kedah. (pp. 96-99).

Tang, Sai Hong and Muslim, Farah Kamil Abid and Khaksar, Weria and Zulkifli, Norzima and Ahmad, Siti Azfanizam (2015) Robotic motion planning in unknown dynamic environments: existing approaches and challenges. In: 2015 IEEE International Symposium on Robotics and Intelligent Sensors (IEEE IRIS 2015), 18-20 Oct. 2015, Langkawi, Kedah, Malaysia. (pp. 288-294).

Thangasamy, Veeraiyah and Kamsani, Noor Ain and Thiruchelvam, Vinesh and Hamidon, Mohd Nizar and Hashim, Shaiful Jahari and Bukhori, Muhammad Faiz and Yusoff, Zubaida (2015) Wireless power transfer with on-chip inductor and class-E power amplifier for implant medical device applications. In: 2015 IEEE Student Conference on Research and Development (SCOReD), 13-14 Dec. 2015, Berjaya Times Square Hotel, Kuala Lumpur, Malaysia. (pp. 422-426).

Theophilus, Dele-Afolabi Temitope and Mohamed Ariff, Azmah Hanim and Mazlan, Norkhairunnisa and Mohamed Yusoff, Hamdan and Mohd Tahir, Suraya (2015) Influence of multi-walled carbon nanotubes on melting temperature and microstructural evolution of Pb-free Sn-5Sb/Cu solder joint. In: INTROP Research Colloquim 2015, 1-2 Dec. 2015, RHR Hotel, Uniten, Putrajaya. .

Uda, Muhammad Nur Aiman and Che Man, Hasfalina and Abd Aziz, Samsuzana and Hashim, Uda and Ariffin, Shahrul Aizzam and Ishak, Zamri and Wahid, Nur Sabrina and Bunawan, Siti Noraini and Salam, Faridah and Mat, Mazidah and Gopinath, Subash Chandra Bose (2015) Immunosensor development for rice tungro bacilliform virus (RTBV) detection using antibody nano-gold conjugate. In: 11th Asian Conference on Chemical Sensors (ACCS2015), 16-18 Nov. 2015, Penang, Malaysia. (pp. 1-9).

Uda, Muhammad Nur Aiman and Che Man, Hasfalina and Abd Aziz, Samsuzana and Salam, Faridah and Abd Rahman, Rafidah and Hashim, Uda and Ariffin, Shahrul Aizzam and Gopinath, Subash Chandra Bose (2015) Determination of set potential voltages for cucumber mosaic virus detection using screen printed carbon electrode. In: 11th Asian Conference on Chemical Sensors (ACCS2015), 16-18 Nov. 2015, Penang, Malaysia. (pp. 1-5).

Uda, Muhammad Nur Aiman and Che Man, Hasfalina and Abd Aziz, Samsuzana and Salam, Faridah and Ishak, Zamri and Bunawan, Siti Noraini and Wahid, Nur Sabrina and Hashim, Uda and Gopinath, Subash Chandra Bose (2015) Determination of fixed-potential selection using chronoamperometry analysis by screen-printed carbon electrode for rice tungro bacilliform virus (RTBV) detection. In: 11th Asian Conference on Chemical Sensors (ACCS2015), 16-18 Nov. 2015, Penang, Malaysia. (pp. 1-3).

Uda, Muhammad Nur Aiman and Che Man, Hasfalina and Abd Aziz, Samsuzana and Salam, Faridah and Ishak, Zamri and Bunawan, Siti Noraini and Wahid, Nur Sabrina and Hashim, Uda and Gopinath, Subash Chandra Bose (2015) Immunosensor development formatting for tungro disease detection using nano-gold antibody particles application. In: 11th Asian Conference on Chemical Sensors (ACCS2015), 16-18 Nov. 2015, Penang, Malaysia. (pp. 1-4).

Usman, Kamilu Iman and Hamidon, Mohd Nizar and Yusof, Nor Azah and Azhari, Saman and Hasan, Intan Helina and Nicodemus, Kure and Abd Rahman, Siti Fatimah (2015) Silicon nanowire interface circuit for biosensing applications. In: 2015 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2015), 19-21 Aug. 2015, Primula Beach Hotel, Kuala Terengganu. .

Wan Ab. Karim Ghani, Wan Azlina and Mohd Salleh, Mohamad Amran and Alias, Azil Bahari (2015) Biochar gasification performance in fluidized bed reactor. In: 22nd Regional Symposium on Chemical Engineering (RSCE 2015), 24-25 Sept. 2015, Novotel Suvarnabhumi Airport Hotel, Bangkok, Thailand. .

Wan Ahmad, Wan Fatinhamamah and Ong, Khuan Shiong and Ab Kadir, Mohd Zainal Abidin and Jasni, Jasronita (2015) Soil treatment for grounding system purposes using sodium thiosulphate. In: 9th Asia-Pacific International Conference on Lightning (APL2015), 23-27 June 2015, Nagoya, Japan. (pp. 336-345).

Wan Ahmad, Wan Fatinhamamah and Tan, Kok Heng and Ab Kadir, Mohd Zainal Abidin and Jasni, Jasronita (2015) Performance of sodium chloride, bentonite and conductive cement as grounding enhancement materials. In: 9th Asia-Pacific International Conference on Lightning (APL2015), 23-27 June 2015, Nagoya, Japan. (pp. 330-335).

Yeoh, Yoeng Jye and Jaafar, Haslina and Wan Hasan, Wan Zuha (2015) 3-level automotive safety warning and alert system using FPGA. In: 2015 IEEE International Circuits and Systems Symposium (ICSyS 2015), 2-4 Sept. 2015, Holiday Villa Beach Resort & Spa, Langkawi, Kedah. (pp. 125-129).

Yusufu, Abdullahi Magaji and Muhammad Noor, Ahmad Shukri and Mohd Azami, Hazwani Nadirah and Tamchek, Nizam and Zainal Abidin, Zurina (2015) Dinitrobenzene sensing utilizing chitosan-based thin films optical fluorescence sensors via linear and nonlinear excitation. In: 2015 9th International Conference on Sensing Technology (ICST 2015), 8-10 Dec. 2015, Auckland, New Zealand. (pp. 629-633).

Zaini, Nur Hazirah and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Ahmad, Nor Izzati and Mohd Radzi, Mohd Amran and Azis, Norhafiz (2015) The effect of temperature on a mono-crystalline solar PV panel. In: 2015 IEEE Conference on Energy Conversion (CENCON), 19-20 Oct. 2015, Johor Bahru, Malaysia. (pp. 249-253).

Zainol, Ismail and Che Razali, Rafiq Akram and Ibrahim, Husni and Syed Abdul Aziz, Saripah Salbiah and Mohamad Ali, Nor Azah and Jaafar, Che Nor Aiza and Mohd Yusof, Nur Sakinah and Shafiee, Maria (2015) Liquid smoke collection system from pyrolisis of coconut shell. In: International Conference on Knowledge Transfer (ICKT'15), 1-3 Dec. 2015, Putrajaya, Malaysia. (pp. 141-145).

Zulkifli, Norzima and Abdul Aziz, Faieza and Sivalingam, Sangeethavani (2015) Development of supplier quality performances in a semiconductor company for ISTMET2015. In: 2015 International Symposium on Technology Management and Emerging Technologies (ISTMET 2015), 25-27 Aug. 2015, Langkawi, Kedah, Malaysia. (pp. 325-329).

Inaugural Lecture

Jaafar, Mohd Saleh (2015) Advancing concrete materials and systems: the search continues. [Inaugural Lecture]

Sulaiman, Shamsuddin (2015) Casting technology: sustainable metal forming process. [Inaugural Lecture]

Yunus, Robiah (2015) Biobased lubricants: harnessing the richness of agriculture resources. [Inaugural Lecture]

Thesis

Abbasi, Arash (2015) Self-biasing multiple-gated-transistors method in designing low-noise amplifier and third-order chebyshev filter. Masters thesis, Universiti Putra Malaysia.

Abdi, Heshmatollah (2015) Response modification factor for steel and reinforced concrete structures with viscous dampers. Masters thesis, Universiti Putra Malaysia.

Abdul Aziz, Mohd Hamim (2015) Oil palm fruit bunches maturity prediction using standard deviation of colour. Masters thesis, Universiti Putra Malaysia.

Abdul Karim Shah, Nor Nadiah (2015) Dean vortex ultraviolet light pasteurization of pummelo (Citrus Grandis L. Osbeck) fruit juice. Doctoral thesis, Universiti Putra Malaysia.

Abdul Raheem, (2015) Gasification of microalgae Chlorella vulgaris for synthesis gas production. Masters thesis, Universiti Putra Malaysia.

Abdul Raof, Nurliyana (2015) Development of palm-based neopentyl glycol diester for transformer oil application. Masters thesis, Universiti Putra Malaysia.

Abdulkadir, Tukur Daiyabu (2015) Development of paddy precision planter for system of rice intensification. Masters thesis, Universiti Putra Malaysia.

Abdullah, Norazlin (2015) Optimisation and rheological modelling of thermosonically extracted tropical fruit juice concentrates. Doctoral thesis, Universiti Putra Malaysia.

Abdullah, Osela Nooradin (2015) Estimation of vegetation density using image analysis and its effect on hydraulic characteristics of an open channel. Masters thesis, Universiti Putra Malaysia.

Abdullahi Baba, Makama (2015) Synthesis, characterization, and application of ZNO/SNSx (x=1 or x=2) nanocomposite photocatalysts for ciprofloxacin degradation under visible light. Doctoral thesis, Universiti Putra Malaysia.

Abdulradha Al-Falahi, Muath Dheaa (2015) Effect of cutting parameters on surface integrity in groove milling of Hastelloy-C276 using coated carbide end mills under dry and wet conditions. Masters thesis, Universiti Putra Malaysia.

Abdulrazzaq, Tuqa (2015) Numerical and experimental analysis of heat transfer and nanofluid flow through an annular pipe with abrupt contraction. Doctoral thesis, Universiti Putra Malaysia.

Abdulwahhab, Ahmed Abbas (2015) Integration of rank-partition and sequential wrapper techniques for feature selection of breast cancer microarray data. Masters thesis, Universiti Putra Malaysia.

Ahmad, Nordila (2015) Physical modeling of local scour around wide and skewed piers. PhD thesis, Universiti Putra Malaysia.

Ahmad Musa, Mukaddas (2015) Durability performance of rubberised fibre mortar. Masters thesis, Universiti Putra Malaysia.

Ahmad Tajuddin, Husna (2015) Efficiency of organo-floc as a natural coagulant in the treatment of palm oil mill effluent. Doctoral thesis, Universiti Putra Malaysia.

Ahmed, Mohammed Kassim (2015) Design and implementation of real data fast fourier transform processor on field programmable gates array. Masters thesis, Universiti Putra Malaysia.

Aimaier, Nueraimaiti (2015) Design of a low-noise low-power front-end readout circuit for neutron detection using 130nm CMOS technology. Masters thesis, Universiti Putra Malaysia.

Al-Anbari, Saud Said (2015) Risk assessment for safety and health algorithm for building construction in Oman. Doctoral thesis, Universiti Putra Malaysia.

Al-Frajat, Jaafar Khadair Kadam (2015) Cost-efficient standard cell library timing and power validation techniques. Masters thesis, Universiti Putra Malaysia.

Al-Jaryawy, Hani Mizhir Magid (2015) Die system design with finite element for improving mechanical performance of extruded aluminium alloys and composites. PhD thesis, Universiti Putra Malaysia.

Al-Khaled, Alfadhl Yahya Khaled (2015) Interdigitated electrode (IDE) sensor for frying oil degradation assessment during heating. Masters thesis, Universiti Putra Malaysia.

Al-Quraishi, Maged Saleh Saeed (2015) Classification of ankle joint movements based on surface electromyography signals. Masters thesis, Universiti Putra Malaysia.

Al-Razzaq Abd, Hayder Abd (2015) Modelling of geometric correction and relative radiometric normalization for near equatorial earth observation satellite images. PhD thesis, Universiti Putra Malaysia.

Al-Saegh, Ali Mohammed Ali (2015) Channel characterization and modeling for GEO satellite-to-land terminals at ku-band with tropical weather awareness. Doctoral thesis, Universiti Putra Malaysia.

Al-Samawi, Aida Ismail Ahmed (2015) Green network planning and operational power consumption optimization in LTE-A using artificial intelligence. Doctoral thesis, Universiti Putra Malaysia.

Al-Timimi, Buthaniah Ali Abed (2015) Production of polycarbonate and multi -walled carbon nanotubes nanocomposites at low filler loadings. Masters thesis, Universiti Putra Malaysia.

Ali, Hydar Lafta (2015) Assessment of sediment transport estimation methods in selected channels. Masters thesis, Universiti Putra Malaysia.

Ali Al-Adnani, Nisreen N. (2015) Structural health monitoring and damage detection for composite panel structures via statistical analysis. PhD thesis, Universiti Putra Malaysia.

Alsayed, Abdallah S.Z. (2015) Robust position encoding and velocity deduction for real time water level monitoring. Masters thesis, Universiti Putra Malaysia.

Amirabadizadeh, Mahdi (2015) Climate change and its impacts on hydrological regime of the Langat River Basin. PhD thesis, Universiti Putra Malaysia.

Anggraini, Vivi (2015) Reinforcement effects of nano-modified coir fibres on lime-treated marine clay. PhD thesis, Universiti Putra Malaysia.

Arezoumand, Reza (2015) Wireless sensor nodes deployment using multi-robot based on improved spanning tree algorithm. Masters thesis, Universiti Putra Malaysia.

Ariffin, Ahmad Hamdan (2015) Energy harvesting system for kenaf fibre reinforced epoxy composite vertical wind turbine blade. Doctoral thesis, Universiti Putra Malaysia.

Azari, Abolfazl (2015) Fractal dielectric resonator antenna for ultra wideband wireless communication systems. Masters thesis, Universiti Putra Malaysia.

Azizan, Fathin Ayuni (2015) Investigation of groundwater potential aquifer using geophysical technique at Sawah Sempadan, Malaysia. Masters thesis, Universiti Putra Malaysia.

Azmi, Nazatul Shima (2015) Treatment of palm oil mill effluent using sandwich ultrafiltration technique. Masters thesis, Universiti Putra Malaysia.

Azmi, Nur Anati (2015) Slope monitoring and slope failure threshold determination at KM46 Jalan Simpang Pulai-Cameron Highlands, Malaysia. Masters thesis, Universiti Putra Malaysia.

Badar, Malik Qasim (2015) Robust communication in differential relay protection using wireless technique. Masters thesis, Universiti Putra Malaysia.

Bagh, Ali Reza Golestan (2015) Adsorption of acid green 25 dye solution using modifed and unmodified kenaf fiber. Masters thesis, Universiti Putra Malaysia.

Bahmanshiri, Adel Amiri (2015) Particle swarm optimization technique of current tracking controller for electric power-assisted steering system. Masters thesis, Universiti Putra Malaysia.

Balakrisnan, Samla Gauri (2015) Detection of aeromonas hydrophila using fiber optic sensor. Masters thesis, Universiti Putra Malaysia.

Bammami, Mohammed Isa (2015) Impacts of soil compaction on emitter performance in sub-surface drip irrigation system. Masters thesis, Universiti Putra Malaysia.

Ban, Ying Siang (2015) H₂ and H ͚ satellite attitude controls for combined energy and attitude control systems. Masters thesis, Universiti Putra Malaysia.

Borazjani, Pouya (2015) Standalone microgrid control using multi-agent system. Masters thesis, Universiti Putra Malaysia.

Boroojerdian, Mohammad Mahdi (2015) Effects of symmetrical roof shape on pressure coefficient difference in isothermal condition. Masters thesis, Universiti Putra Malaysia.

Chattha, Shakeel Hussain (2015) New wheat storage structures and their effects on grain quality in Sindh, Pakistan. PhD thesis, Universiti Putra Malaysia.

Che Saffry, Zetty Azleen (2015) Development of operational modal analysis techniques in wind tunnel environment for a cantilevered composite wing model. Masters thesis, Universiti Putra Malaysia.

Chong, Pik Han (2015) Microencapsulation of Betacyanin extract from amaranth. PhD thesis, Universiti Putra Malaysia.

Chua, Bee Lin (2015) Extraction and identification of di(2-ethylhexyl) phthalate from safed musli (chlorophytum borivilianum L.). PhD thesis, Universiti Putra Malaysia.

Dadras, Mohsen (2015) A geospatial approach in modeling urban land development and redevelopment of Bandar Abbas, Iran. Doctoral thesis, Universiti Putra Malaysia.

Darmawan, Rosli (2015) CFD modeling of performance enhancement for nuclear research reactor cooling system. Doctoral thesis, Universiti Putra Malaysia.

Daud, Nor Hidayah (2015) Miniaturization of UHF RFID tag antenna. Masters thesis, Universiti Putra Malaysia.

Daud, Nor Shazwani (2015) Application of protein extracted from wheat germ as natural coagulant for palm oil mill effluent using oscillatory flow reactor. Masters thesis, Universiti Putra Malaysia.

Dele-Afolabi, Temitope Theophilus (2015) Intermetallics evolution and shear strength of carbon nanotubes- reinforced sn-5sb solder on copper board. Masters thesis, Universiti Putra Malaysia.

Eftekhari, Fathollah (2015) Development of strategies to improve communication management within virtual construction project teams. Masters thesis, Universiti Putra Malaysia.

Etti, Christopher Joseph (2015) Flowability of selected Malaysian herbal powders and their formulations. PhD thesis, Universiti Putra Malaysia.

Faris Al-Oqla, Faris Mohammed Khair (2015) Enhancement of evaluation methodologies for natural fiber composites material selection system. Doctoral thesis, Universiti Putra Malaysia.

Farzan, Ali (2015) Prediction of Alzheimer disease using improved MMSE ensemble regressor based on magnetic resonance images. PhD thesis, Universiti Putra Malaysia.

Firoozi, Zahra (2015) Development of integrated models for distribution network design of perishable products. Doctoral thesis, Universiti Putra Malaysia.

Gahrizsangi, Hadis Salehi (2015) Application of vetiver grass for soil and water conservation in artificial plots. Masters thesis, Universiti Putra Malaysia.

Galavi, Hadi (2015) Uncertainty analysis of Langat river flow projections using impact-based multi-model ensemble approaches. PhD thesis, Universiti Putra Malaysia.

Ghobadi, Yasser (2015) SWAT based GIS modelling and impact assessment of dam project in Karkheh river basin and wetland using spatio-temporal satellite data. Doctoral thesis, Universiti Putra Malaysia.

Ghobadifar, Faranak (2015) Pest attack determination in paddy areas using multispectral remote sensing images. Doctoral thesis, Universiti Putra Malaysia.

Ghobakhloo, Morteza (2015) Mediating role of lean manufacturing practice for information technology resources and performance improvement of manufacturing firms. PhD thesis, Universiti Putra Malaysia.

Gholizadeh, Samira (2015) Glass fiber-reinforced polyester composite fatigue crack monitoring using acoustic emission. Masters thesis, Universiti Putra Malaysia.

Hamadani, Maral Faghani (2015) Sigma-delta analog to digital converter on field programmable gate array. Masters thesis, Universiti Putra Malaysia.

Hamedianfar, Alireza (2015) Integration of object-based image analysis and data mining techniques for detailes urban mapping using remote sensing. PhD thesis, Universiti Putra Malaysia.

Hamzah, Muhammad Noh (2015) Distinct characteristics of cloud-to-ground lightning electric fields generated in Malaysia. Masters thesis, Universiti Putra Malaysia.

Harun, Noor Hasmiza (2015) Development of inductive sensor for determining ripeness of oil palm fruit. Doctoral thesis, Universiti Putra Malaysia.

Hasheminejad, Hamidreza (2015) Honeynet as a service deployment approach in enabling virtual crime scene investigation. Masters thesis, Universiti Putra Malaysia.

Hozoorbakhsh, Asghar (2015) Parametric investigation of heat transfer and fluid flow on laser micro-welding. Masters thesis, Universiti Putra Malaysia.

Ibrahim, Bala (2015) Performance of a modified paddy transplanter planting finger for system of rice intensification. Masters thesis, Universiti Putra Malaysia.

Ismail, Houssam Said Abdelrahman (2015) Open innovation implementation pratices and firm competitiveness in Malaysian manufacturing industry. Masters thesis, Universiti Putra Malaysia.

Jafari, Mohammad (2015) Linear quadratic regulator with genetic algorithm for flexible structures vibration control. Masters thesis, Universiti Putra Malaysia.

Jahan, Mohammad Saukat (2015) Trade-off between energy efficiency and collisions for MAC protocols of wireless sensor network. PhD thesis, Universiti Putra Malaysia.

Jahromi, Seyed Mojtaba Zabihinpour (2015) Development of fuzzy control charts for monitoring manufacturing process with uncertain and vague observations. Doctoral thesis, Universiti Putra Malaysia.

Jebur, Mustafa Naemah (2015) Multi remote sensing data in landslide detection and modelling. Doctoral thesis, Universiti Putra Malaysia.

Kamaruddin, Syahidah (2015) Effect of various active packaging system on quality and microbial stability of fresh-cut cantaloupe (Cucumis melo L. Var. Reticulates cv. Glamour). Masters thesis, Universiti Putra Malaysia.

Karami, Mahdi (2015) Mixed eccentricity fault detection based on stator current analysis in line start permanent magnet synchronous motor. Doctoral thesis, Universiti Putra Malaysia.

Khalid, Nurul Izzah (2015) Kinetics of fouling deposit removal of pink guava purees in a cleaning-in-place test rig. Masters thesis, Universiti Putra Malaysia.

Khammar, Mohammad Reza (2015) Blotch removal using multi-level scanning, shape analysis, and meta heuristic techniques. PhD thesis, Universiti Putra Malaysia.

Khan, Tabrej (2015) Aerodynamic characteristic assessment of an airfoil using open circuit wind tunnel and computational fluid dynamics. Masters thesis, Universiti Putra Malaysia.

Khazaali, Maryam (2015) Performance analysis of free space optical communications employing Duty Cycle Division Multiplexing. Masters thesis, Universiti Putra Malaysia.

Khouzani, Samira Eshghi (2015) Sliding mode control techniques for combined energy and attitude control system. Masters thesis, Universiti Putra Malaysia.

Kohneh, Samad Shirzadi Deh (2015) Genetic algorithm-based arrangement of photovoltaic modules in arrays for mismatch loss mitigation. Masters thesis, Universiti Putra Malaysia.

Liew, Shan Qin (2015) Acidic and enzymetic extraction of pectin from peels of soursop, passion fruit and dragon fruit. Masters thesis, Universiti Putra Malaysia.

Lim, Lien Tze (2015) Continuous-wave fiber optical parametric amplifiers and oscillators. Doctoral thesis, Universiti Putra Malaysia.

Luaibi Alrazen, Hayder Abdullah (2015) Numerical simulation of the effect of Ch4, H2 and diesel fuel mixture on four stroke engine. Masters thesis, Universiti Putra Malaysia.

Maghami, Mohammad Reza (2015) Dust material and mathematical relationship identification for photovoltaic systems. Masters thesis, Universiti Putra Malaysia.

Mahdi, Lamya M.J (2015) Aging deformation resistance of nanoclaymodified stone mastic asphalt mixture. Doctoral thesis, Universiti Putra Malaysia.

Mahjoub, Babak (2015) Computational fluid analysis of flow around a finite height circular cylinder using splitter plate. Masters thesis, Universiti Putra Malaysia.

Mansor, Atikah (2015) Improvement of ultraviolet pasteuriser for production of pineapple fruit juice. Masters thesis, Universiti Putra Malaysia.

Mazidi, Hossein (2015) Power amplifier memory polynomial predistorter for long term evolution application. Masters thesis, Universiti Putra Malaysia.

Md Deros, Mohd Azaman (2015) Injection moulding simulation of wood–filled polypropylene thin-walled composite parts. PhD thesis, Universiti Putra Malaysia.

Md Yunos, Noor Seribainun Hidayah (2015) Residual oil removal from oil palm empty fruit bunches using high pressure water spray system. Masters thesis, Universiti Putra Malaysia.

Moazami, Danial (2015) Determination of relative damage of Asphalt pavement from reduced tire contact area. Doctoral thesis, Universiti Putra Malaysia.

Mohamad Aziz, Nur Atiqah (2015) Development of food grade green lubricant from palm oil methyl ester. Masters thesis, Universiti Putra Malaysia.

Mohamad Jusoh, Mohamad Zamin (2015) Breakwater geometric model base on mangrove roots structure. Masters thesis, Universiti Putra Malaysia.

Mohamad Shahapuzi, Nur Syafikah (2015) Effects of various conditions on and empirical modeling of baking process in convection oven. Masters thesis, Universiti Putra Malaysia.

Mohamedou, Ahmed (2015) Dynamic approaches for spectrum control in cognitive radio networks. Doctoral thesis, Universiti Putra Malaysia.

Mohammed, Alaa Hadi (2015) Adaptive interference canceller using analog algorithm with offset voltage. Masters thesis, Universiti Putra Malaysia.

Mohammed Riyadh Khaleel, (2015) Performance of a combined system of electrolysis and granular activated carbons for leachate treatment of Jeram sanitary landfill, Malaysia. Masters thesis, Universiti Putra Malaysia.

Mohd Aris, Khairul Dahri (2015) A Structural Health Monitoring (SHM) of composite patch repair for aircraft part and structures using principal component analysis. Doctoral thesis, Universiti Putra Malaysia.

Mohd Ibrahim, Khairul Ridzwan (2015) Evaluation of gypsum based material as coating agent to improve the efficiency of granular urea fertiliser. Masters thesis, Universiti Putra Malaysia.

Mohd Nasir, Rinie Narinie (2015) Modelling and simulation of improved scarani-acin-ribordy-GISIN-04 preprocessing technique. Masters thesis, Universiti Putra Malaysia.

Mohd Radi, Nor Hadzfizah (2015) Measurement and modeling of hand grip strength and endurance of Malaysian female. Masters thesis, Universiti Putra Malaysia.

Mohd Ramly, Munirah (2015) Strength of reduced size mortarless interlocking Putra load bearing hollow block system. Masters thesis, Universiti Putra Malaysia.

Mohd Razelan, Intan Suhana (2015) Development of composite risk index for federal roads in Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Mohd Rozalli, Norazatul Hanim (2015) Characterization of natural peanut butter produced by one-stage fine grinding method using ultra-high speed grinder. Doctoral thesis, Universiti Putra Malaysia.

Mohd Sidek, Mohd Hasimi (2015) Automated dual-axis solar tracking system based on astronomical equation and global positioning system. Masters thesis, Universiti Putra Malaysia.

Mohd Thani, Nurfatimah (2015) Evaluation of rheological properties and quality of xylitol-substituted dadih. Masters thesis, Universiti Putra Malaysia.

Mohd Yusoff, Norpisah (2015) Effect of bending degree of down conductor on lightning current diversion in lightning protection system installation. Masters thesis, Universiti Putra Malaysia.

Mohd Zahri, Nur Amirah (2015) Performance of amidoxime-modified poly (Acrylonitrile-co-acrylic acid) for the removal of cadmium (II) and lead (II) ions in aqueous solution. Masters thesis, Universiti Putra Malaysia.

Mokhtar, Taufiq Aminullah (2015) Characterisation and dissolution kinetics of tamarind and pineapple tablets. Masters thesis, Universiti Putra Malaysia.

Molamohamadi, Zohreh (2015) Development of a two-level trade credit model with shortage for deteriorating products using hybrid metaheuristic algorithm. Doctoral thesis, Universiti Putra Malaysia.

Mona Kiaee, (2015) Simulation of LM6 alloy with Ti-B refinement in squeeze casting process. Masters thesis, Universiti Putra Malaysia.

Mortezaei, Navid (2015) Development of mathematical models for integration of lot sizing and flow shop scheduling with lot streaming. PhD thesis, Universiti Putra Malaysia.

Muazu, Aliyu (2015) Modeling for energy optimization in wetland paddy production in North-West Selangor, Malaysia. PhD thesis, Universiti Putra Malaysia.

Muda, Mohd Khairul Hafiz (2015) Kenaf patch repair for composite parts and damage identification strategy. Masters thesis, Universiti Putra Malaysia.

Muhammed, Abubakar Sadiq (2015) Suitability of using compacted granite residual soil treated with palm oil fuel ash as hydraulic barrier in sanitary landfill. Masters thesis, Universiti Putra Malaysia.

Muhammed, Hadi Hamaaziz (2015) Modeling of capillary wick irrigation system for potted plant and small scale plantation. Masters thesis, Universiti Putra Malaysia.

Musaddiq, Arslan (2015) Channel assignment and congestion control in multi-radio multi-channel wireless mesh networks. Masters thesis, Universiti Putra Malaysia.

Musarudin, Marianie (2015) Optimization of energy window for different body mass index in biograph truepoint positron emission tomography imaging system. Doctoral thesis, Universiti Putra Malaysia.

Nasib, Mohammad Yunus (2015) Detection of cavities in Kuala Lumpur Limestone using geo-electromagnetic method. Masters thesis, Universiti Putra Malaysia.

Nemati, Jamshid (2015) Mechanical properties of ultra-fine grain aluminium AL6063 and pure copper processed by equal channel angular extrusion method. PhD thesis, Universiti Putra Malaysia.

Nematollahi, Mohammad Ali (2015) Digital speech watermarking for online speaker recognition systems. Doctoral thesis, Universiti Putra Malaysia.

Nicodemus, Kure (2015) Plasma technique of carbon nanotube synthesis using commercial microwave oven. Masters thesis, Universiti Putra Malaysia.

Olufemi, Osaji Emmanuel (2015) Improvement on optimal coordination of directional overcurrent relays in mesh distribution network system using artificial intelligence technique. Masters thesis, Universiti Putra Malaysia.

Omar Baki, Munaim Ali (2015) Mechanical and ballistic properties of compressed coir-epoxy composite. Masters thesis, Universiti Putra Malaysia.

Paslar, Shahla (2015) Hybrid dynamic scheduling model for flexible manufacturing system with machine availability and new job arrivals. PhD thesis, Universiti Putra Malaysia.

Pourakbar, Shahram (2015) Use of alkali-activated palm oil fuel ash reinforced by microfibres for soft soil stabilisation. PhD thesis, Universiti Putra Malaysia.

Raeisinafchi, Mehran (2015) Design of CMOS potentiostat for low-concentration heavy metal detection. Masters thesis, Universiti Putra Malaysia.

Rahmanian, Saeed (2015) Mechanical and thermal characterization of multiscale carbon nanotube polypropylene and epoxy composites. Doctoral thesis, Universiti Putra Malaysia.

Ramli, Alif Syamim Syazwan (2015) Mathematical modelling of aerodynamic characteristics for flapping wing ornithopter. Masters thesis, Universiti Putra Malaysia.

Rashid, Hamzah Fareed (2015) Seamless and secure handover scheme in mobile WiMAX. Masters thesis, Universiti Putra Malaysia.

Razaei, Nima (2015) Optimal overcurrent relay coordination in wind farm using genetic algorithm. Masters thesis, Universiti Putra Malaysia.

Razali, Mohamad Fiteri (2015) A method for performance comparison of generator matrices in wireless communication. Masters thesis, Universiti Putra Malaysia.

Rezaeian, Sarah (2015) Gas inspector mobile robot as carbon monoxide source finder. Masters thesis, Universiti Putra Malaysia.

Rowshanaie, Omid (2015) Generating power from fluegas produced by boilers through thermodynamic organic rankine cycle. Masters thesis, Universiti Putra Malaysia.

Saadat, Md. Nazmus (2015) Adaptive and optimized radio resource allocation algorithms for OFDMA based networks. Doctoral thesis, Universiti Putra Malaysia.

Sabaruddin, Ainul Aniyah (2015) Engine downsizing simulation based on low rpm variable valve timing system. Masters thesis, Universiti Putra Malaysia.

Sadeghi, Mohammad Mehdi Gilanian (2015) Optimized scheme for efficient and scalable key management in IEEE 802.16e-based networks. Doctoral thesis, Universiti Putra Malaysia.

Sadeghi, Omid Sarrafan (2015) Optimal sizing of hybrid tidal, photovoltaic and battery sources of energy. Masters thesis, Universiti Putra Malaysia.

Sai'd, Yunusa Ali (2015) Effect of masking techniques on computational complexity reduction of scale invariant feature transform. Doctoral thesis, Universiti Putra Malaysia.

Saifullah, Md. (2015) Dissolution characteristics of selected fruit tablets with effervescent agents (pdf symbol pada muka surat references). Masters thesis, Universiti Putra Malaysia.

Salah, Asem Ahmad Mohamad (2015) LTE-based passive radar for ground target detection and tracking. Doctoral thesis, Universiti Putra Malaysia.

Salih, Dhiadeen Mohammed (2015) Adaptive model predictive control based on wavelet network and online sequential extreme learning machine for nonlinear systems. Doctoral thesis, Universiti Putra Malaysia.

Salih, Moslih Amer (2015) New geo-polymerization process for high strength alkali-activated binder with palm oil fuel ash and ground granulated blast furnace slag. Doctoral thesis, Universiti Putra Malaysia.

Salman, Mustafa Ismael (2015) Self-configured link adaptation using channel quality indicator-modulation and coding scheme mapping with partial feedback for green long-term evolution cellular systems. PhD thesis, Universiti Putra Malaysia.

Salman, Omar Hussein (2015) Multi-source data fusion framework for remote triaging and prioritization in telemedicine. PhD thesis, Universiti Putra Malaysia.

Saravani, Ali Jahed (2015) Automatic control of flotation process using computer vision. PhD thesis, Universiti Putra Malaysia.

Shabaneh, Arafat Abdallah Abdelwadod (2015) Development of chemical sensors based on tapered optical fiber tip coated with nanostructured thin films. Doctoral thesis, Universiti Putra Malaysia.

Shafapourtehrany, Mahyat (2015) Improved flood detection and susceptibility modelling using remote sensing and geographic information system. PhD thesis, Universiti Putra Malaysia.

Shahbazpanahi, Shahriar (2015) Simulation of cracks propagation of reinforced concrete beam-to-column joint with FRP strengthening in flexural and shear region. Doctoral thesis, Universiti Putra Malaysia.

Shahmohammadi, Mohammad Sadegh (2015) Development of system dynamic model to evaluate the impact of feed - in tariff for different energy resources. Masters thesis, Universiti Putra Malaysia.

Shahrazi, Syahinaz (2015) Enzymatic reaction kinetic and adsorption process in cyclodextrins production from selected starches. Masters thesis, Universiti Putra Malaysia.

Solouki, Abbas (2015) Effect of blending process on rheological and volumetric properties of asphalt binder. Masters thesis, Universiti Putra Malaysia.

Sulaiman, Abdul Hadi (2015) Lyot-filter-based multiwavelength fiber laser using a semiconductor optical amplifier assisted by nonlinear polarization rotation effect. Doctoral thesis, Universiti Putra Malaysia.

Sulaiman, Shazelia Ashikin (2015) Utilization of artificial aquifer physical model to aid technical learning of groundwater hydrology. Masters thesis, Universiti Putra Malaysia.

Talib, Ahmad Tarmezee (2015) Kinetic-dynamic modeling of co-composting of oil palm empty fruit bunch with rabbit manure in a closed system with mass and energy transfer. Masters thesis, Universiti Putra Malaysia.

Tan, Gim Heng (2015) Radio frequency front end receiver blocks with ultra low supply voltage and low power dissipation for Zigbee applications. Doctoral thesis, Universiti Putra Malaysia.

Tayebiyan, Aida (2015) Optimization of hydropower reservoir system using genetic algorithm for various climatic scenarios. Doctoral thesis, Universiti Putra Malaysia.

Tee, Yee Bond (2015) Development of poly(lactic acid)/kenaf-derived cellulose with thermally grafted aminosilane and epoxidized plant oils for potential food packaging applications. Doctoral thesis, Universiti Putra Malaysia.

Toosi, Saman (2015) Multi-directional matrix converter for low power application using field-programmable gate array. PhD thesis, Universiti Putra Malaysia.

Uda, Muhammad Nur Aiman (2015) Immunosensor-based detection of tungro disease in rice plant. Masters thesis, Universiti Putra Malaysia.

Umar, Mohammed (2015) Development of bio-mulching materials for weed control, soil moisture conservation and insect repellency in system of rice intensification. Masters thesis, Universiti Putra Malaysia.

Waqar Tariq, (2015) Standby mode minimization for efficient building management system using fuzzy logic. Masters thesis, Universiti Putra Malaysia.

Ya'u, Mohammed Sani (2015) Improvement of power swing blocking scheme in distance protection relay. Masters thesis, Universiti Putra Malaysia.

Yadegar, Sanaz (2015) Chatter-free and equivalent estimator fuzzy model-based sliding mode controller for serial links 6 dof robot manipulator. Masters thesis, Universiti Putra Malaysia.

Yahaya, Ridwan (2015) Mechanical and ballistic properties of natural fibre-aramid hybrid laminated composites. Doctoral thesis, Universiti Putra Malaysia.

Yong, Thian Haw (2015) An investigation of the performance of NiTi shape memory alloy based bone fixation device. Masters thesis, Universiti Putra Malaysia.

Yusefi, Mostafa (2015) Fabrication of PLA/COW dung-based biocomposite. Masters thesis, Universiti Putra Malaysia.

Yusoff, Suhaimizi (2015) Gold potential mapping using bivariate and multivariate statistical models in GIS at Gua Musang, Malaysia. Masters thesis, Universiti Putra Malaysia.

Zainol Abidin, Mohd Ashraf (2015) Evaluation of root zone cooling system for strawberry (Fragaria x ananassa duchesne) cultivation in tropical lowlands. Masters thesis, Universiti Putra Malaysia.

Zainuddin, Muhammad Fakhri (2015) Development of pineapple waste pellets and In vitro digestilibility study for herbivore. Masters thesis, Universiti Putra Malaysia.

Zamani, Seyed Ali (2015) Production and characterization of biochar derived from oil palm wastes, and optimization for zinc adsorption. Doctoral thesis, Universiti Putra Malaysia.

Zarafshan, Faraneh (2015) Permission-based fault tolerant mutual exclusion algorithm for mobile Ad Hoc networks. Doctoral thesis, Universiti Putra Malaysia.

Zareei, Hassan (2015) Development of a family product usability model for older Malaysians. Doctoral thesis, Universiti Putra Malaysia.

Zhang, Xiaotian (2015) Development and formulation of coolant and non-corrosive aerosol forming agent system. Doctoral thesis, Universiti Putra Malaysia.

This list was generated on Fri Apr 19 09:02:21 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0