Items where Division is "Faculty of Engineering" and Year is 2013

Group by: Creators | Item Type | No Grouping

Jump to: Article | Book Section | Conference or Workshop Item | Patent | Thesis

Number of items: 844.

Article

A. Talib, Rosnita and Chin, Nyuk Ling and Md. Yunos, Khairul Faezah and Abdan, Khalina and Kadir Basha, Roseliza and Yee, Bond Tee (2013) Thermally Grafting Aminosilane onto Kenaf-Derived Cellulose and Its Influence on the Thermal Properties of Poly(Lactic Acid) Composites. BioResources, 8 (3). pp. 4468-4483. ISSN 1930-2126

A. Talib, Rosnita and Yusof, Yus Aniza and E. A. A., Rahman and Aziz, Mohammad Gulzarul (2013) Modelling the Effect of Temperature on Respiration Rate of Fresh Cut Papaya (Carica papaya L.) Fruits. Food Science and Biotechnology, 22 (6). pp. 1581-1588. ISSN 1226-7708

A.Rasid, Zainudin and Zahari, Rizal and Ayob, Amran (2013) The post-buckling behavior of the composite plates with embedded shape memory alloy subjected to combined loading using finite element method. International Review of Mechanical Engineering, 7 (6). pp. 1121-1127. ISSN 1970-8734

Ab Kadir, Mohd Zainal Abidin and Hizam, Hashim and Jasni, Jasronita and Askari, Mohamad Tolou (2013) A New Approach to Simulate the Wind Power Energy Based on the Probability Density Function. International Journal of Electrical Components and Sustainable Energy, 1 (2). 13-Aug. ISSN 2203-0034

Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Askari, Mohamad Tolou and Hajikhani, Maryam (2013) Evaluation of Lightning Current Using Inverse Procedure Algorithm. International Journal of Applied Electromagnetics and Mechanics, 41 (3). pp. 267-278. ISSN 1383-5416

Abang Ali, Abang Abdullah and Anwar, Mohamad Parves and Voo, Yen Lei (2013) Structural Insulated Panels: Past, Present, and Future. Journal of Engineering, Project, and Production Management, 3 (1). 8-Feb. ISSN 2221-6529

Abang Ali, Abang Abdullah and Demirboga, Ramazan and Farzadnia, Nima (2013) Characterization of high strength mortars with nano alumina at elevated temperatures. Cement and Concrete Research, 54 (2013). pp. 43-54. ISSN 0008-8846

Abang Ali, Abang Abdullah and Demirboga, Ramazan and Farzadnia, Nima and Anwar, Mohammed Parvez (2013) Characterization of high strength mortars with nano Titania at elevated temperatures. Construction and Building Materials, 43. pp. 469-479. ISSN 0950-0618

Abang Ali, Abang Abdullah and Demirboga, Ramazan and Farzadnia, Nima and Anwar, Mohammed Parvez (2013) Effect of halloysite nanoclay on mechanical properties, thermal behavior and microstructure of cement mortars. Cement and Concrete Research, 48. pp. 97-104. ISSN 0008-8846

Abang Ali, Abang Abdullah and Panjehpour, Mohammad (2013) A review of prefab home and relevant issues. Constructii, 14 (1). pp. 53-60. ISSN 1221-2709

Abas, Siti Nur Aeisyah and Ismail, Mohd Halim Shah and Kamal, Md Lias and Izhar, Shamsul (2013) Adsorption process of heavy metals by low-cost adsorbent: a review. World Applied Sciences Journal, 28 (11). pp. 1518-1530. ISSN 1818-4952; ESSN: 1991-6426

Abd. Aziz, Farah Nora Aznieta and Abdul Rahim, Mustaqqim and Md Ghazaly, Zuhayr and Shahidan, Shahiron and Mohamad Ibrahim, Norlia (2013) Flexural Behaviour Of High Performance Slurry Infiltrated Fiber Reinforced Concerete With Different Curing Method. Australian Journal of Basic and Applied Sciences, 7 (4). pp. 184-188. ISSN 1991-8178

Abdelsamie, Maher A. A. and Abdul Rahman, Russly and Mustafa, Shuhaimi and Hashim, Dzulkifly (2013) Effect of packaging shape and storage on the keeping quality of mineral water and a development of water-treatment device. Journal of Food Processing & Technology, 4 (5). art. no. 231. pp. 1-5. ISSN 2157-7110

Abdul Aziz, Faieza and Jamali, Negar (2013) Factors inflencing the level of adoption in electronic commerce among SMEs. International Journal of Information Technology & Computer Science, 8 (2). pp. 105-110. ISSN 2091-1610

Abdul Aziz, Faieza and Sahari, Barkawi and Abdul Aziz, Nuraini and Halali, M. (2013) Effect of Material on Crashworthiness for Side Doors and B Pillar Subjected to Euro NCAP Side Impact Crash Test. Journal Advance Science Letters, 19 (2). pp. 359-362. ISSN 1936-6612

Abdul Aziz, Faieza and Sahari, Barkawi and Abdul Aziz, Nuraini and Lilehkoohi, A. H. and Halali, M. (2013) Crashworthiness Determination for Front and Rear Doors and B Pillar Subjected to Side Impact Crash by a Mobile Deformable Barrier. Journal Advance Science Letters, 19 (2). pp. 392-395. ISSN 1936-6612

Abdul Aziz, Faieza and Sahari, Barkawi and Abdul Aziz, Nuraini and Lilehkoohi, A. H. and Halali, M. (2013) Effect of Material and Thickness of Side Doors And B Pillar on Crashworthiness in Euro NCAP Side Impact Crash Test. Journal Advance Science Letters, 19 (2). pp. 359-362. ISSN 1936-6612

Abdul Aziz, Faieza and Solomon, Orakwe Nwabueze (2013) A review of the negotiation protocol for agent based manufacturing system control. International Journal of Information Technology and Computer Science, 8 (1). pp. 35-39. ISSN 2091-1610

Abdul Aziz, Nuraini and Inayatullah, Othman and Mohamad Jusoh, Mohamad Zamin (2013) The mechanism of mangrove tree in wave energy propagation. Advanced Materials Research, 614-615. pp. 568-572. ISSN 1022-6680; ESSN: 1662-8985

Abdul Aziz, Nuraini and Mohamed Ariff, Azmah Hanim and Shah Mattar, Zainal Abidin (2013) The Effect of Welding Process Parameter on Temperature and Residual Stress in Butt-Joint Weld of Robotic Gas Metal Arc Welding. Australian Journal of Basic and Applied Sciences, 7 (7). pp. 814-820. ISSN 1991-8178

Abdul Aziz, Nuraini and Najafabadi, Mohammad Izadi (2013) Homogeneous Charge Compression Ignition Combustion: Challenges and Proposed Solutions. Journal of Combustion, 2013 (793789). 14-Jan. ISSN 2090-1968

Abdul Hamid, Aziana Azlin and Yusof, Yus Aniza and Chin, Nyuk Ling and Mohamed, Suhaila and Salleh, Faiqa (2013) Effect of feed powder quantity and compression pressure on the tensile strength of Eurycoma longifolia Jack tablets using different binders. International Journal of Food Engineering, 9 (2). pp. 155-161. ISSN 2194-5764; ESSN: 1556-3758

Abdul Khader, Shah Mohammed A. and Ayachit, Anurag and Pai, Raghuvir and Zubair, Mohammed and Ahmad, Kamarul Arifin and Rao, Vedularajanikanth (2013) Study of the influence of normal and high blood pressure on normal and stenosed carotid bifurcation using fluid-structure interaction. Applied Mechanics and Materials, 315. pp. 982-986. ISSN 1660-9336; ESSN: 1662-7482

Abdul Rahman, Rafeah and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Ngaini, Zainab and Mobarekeh, Mohsen Nourouzi (2013) Oil removal from aqueous state by natural fibrous sorbent: an overview. Separation and Purification Technology, 113. pp. 51-63. ISSN 1383-5866; ESSN: 1873-3794

Abdul Rashid, Suraya and Abdul Rashid, Muhammad Zamir and Musa, Muharniza Azinita and Othman, Siti Hajar (2013) Assessment of gas flow characteristics and reaction kinetics of chemical vapour deposition reactors for the production of nano-hybrid fibres. Asia-Pacific Journal of Chemical Engineering, 8 (2). pp. 254-261. ISSN 1932-2135; ESSN: 1932-2143

Abdul Rashid, Suraya and Kumar, Rajesha and M. Isloor, Arun and Ismail, Ahmad Fauzi and Al Ahmed, Amir (2013) Permeation, antifouling and desalination performance of TiO2 nanotube incorporated PSf/CS blend membranes. Desalination, 316 (5). pp. 76-84. ISSN 0011-9164

Abdul Rashid, Suraya and Mohd Salleh, Mohamad Amran and Mohd Yusoff, Hamdan and Rahmanian, Saeed and Thean, K. S. and Md. Aziz, Shazed (2013) Carbon and glass hierarchical fibers : influence of carbon nanotubes on tensile, flexural and impact properties of short fiber reinforced composites. Materials and Design, 43. pp. 10-16. ISSN 0261-3069

Abdul Rashid, Suraya and Najigivi, Alireza and Khaloo, Alireza and Zad, Azam Iraji (2013) Investigating the effects of using different types of SiO2 nanoparticles on the mechanical properties of binary blended concrete. Composites Part B: Engineering, 54 (Nov-13). pp. 52-58. ISSN 1359-8368

Abdul Rashid, Suraya and S. Shenvi, Seema and Ismail, Ahmad Fauzi and Kassim, Mohd Azraai and M. Isloora, Arun (2013) Preparation and characterization of PPEES/chitosan composite nanofiltration membrane. Desalination, 315 (4). pp. 135-141. ISSN 0011-9164

Abdul Wahab, Noor Izzri and Mohamed, Azah and Hussain, Aini (2013) Classification-based fast transient stability assessment of power systems using LS-SVM with enhanced feature reduction techniques. Wulfenia, 20 (4). pp. 170-186. ISSN 1561-882X

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin and Abdul Aziz, Nuraini (2013) Quality evaluation of cold embossed hole based on profile measurement technique. Advanced Materials Research, 626. pp. 564-568. ISSN 1022-6680; ESSN: 1662-8985

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin and M. Tandoor, Khaleed Hussain and Abdul Aziz, Nuraini (2013) Twist springback measurement of autonomous underwater vehicle propeller blade based on profile deviation. American Journal of Applied Sciences, 10 (5). pp. 515-524. ISSN 1546-9239; ESSN: 1554-3641

Abdullah, Azhar and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Vijayaram, Thoguluva Raghavan (2013) Green compression strength of tin mine tailing sand for green sand casting mould. Pertanika Journal of Science & Technology, 21 (2). pp. 335-342. ISSN 0128-7680; ESSN: 2231-8526

Abdullah, Luqman Chuah and Ching, Yern Chee and Goh, Kuan Yong and Nadarajah, Kalyani (2013) Effect of Nanosilica and Titania on Thermal Stability of Polypropylene/Oil Palm Empty Fruit Fibre Composite. Journal of Biobased Materials and Bioenergy, 7 (1). pp. 169-174. ISSN 1556-6560

Abdullah, Luqman Chuah and Choong, Shean Yaw Thomas and Gregory, F. L. Koay (2013) Economic feasibility assessment of one and two stages dry fractionation of palm kernel oil. Industrial Crops and Products, 49 (-). pp. 437-444. ISSN 0926-6690

Abdullah, Norazlin and Chin, Nyuk Ling and Mokhtar, Mohd Noriznan and Taip, Farah Saleena (2013) Effects of bulking agents, load size or starter cultures in kitchen-waste composting. International Journal of Recycling of Organic Waste in Agriculture, 2. art. no. 3. pp. 1-10. ISSN 2195-3228; ESSN: 2251-7715

Abdulrazeg, Aeid Ali and Noorzaei, Jamaloddin and Mohammed, Thamer Ahmed and Jaafar, Mohd Saleh (2013) Modeling of combined thermal and mechanical action in roller compacted concrete dam by three-dimensional finite element method. Structural Engineering and Mechanics, 47 (1). pp. 1-25. ISSN 1225-4568; ESSN: 1598-6217

Abed, Buthainah Ali and Awang Biak, Dayang Radiah and W., Alnuami and Geshnizjani, Shiva and Mohamed Haidzir, Noor Hazira and Gomes, Chandima (2013) Review article: applications of nanocomposites in industrial systems. Journal of Purity, Utility Reaction and Environment, 2 (5). pp. 92-114. ISSN 2314-8101; ESSN: 2232-1179

Abu Bakar, Badrul Hisham and Ishak, Asnor Juraiza and Shamsuddin, Rosnah and Wan Hassan, Wan Zuha (2013) Ripeness level classification for pineapple using RGB and HSI colour maps. Journal of Theoretical and Applied Information Technology, 57 (3). pp. 587-593. ISSN 1992-8645; ESSN: 1817-3195

Abu Bakar, Muhammad Hafiz and Mahdi, Mohd Adzir and Mahamd Adikan, Faisal Rafiq and Ibrahim, N. H. (2013) L-band R-EDFA/Raman hybrid amplifier with enhanced higher-order pumping scheme utilizing stimulated Raman scattering. Optics Communications, 291. pp. 155-161. ISSN 0030-4018

Abu Hassan, Norhasmillah and Puah, Chiew Wei and Ibrahim, Nor Azowa and Samsu Baharuddin, Azhari and Choo, Yuen May (2013) Life cycle inventory of the commercial production of compost from oil palm biomass: a case study. Environment, Development and Sustainability, 15 (6). pp. 1663-1670. ISSN 1387-585X; ESSN: 1573-2975

Abu Samah, Mohd Armi and Abd Manaf, Latifah and Periathamby, Agamuthu and Sulaiman, Wan Nor Azmin and Ahsan, Amimul (2013) Real data composition of municipal solid waste (MSW) generated in Balakong, Selangor, Malaysia. Life Science Journal, 10 (4). pp. 1687-1694. ISSN 1097-8135; ESSN: 2372-613X

Abu Talib, Abd. Rahim and Ramadhan, A. A. and Mohd Rafie, Azmin Shakrine and Zahari, Rizal (2013) Influence of cut-out hole on multi-layer Kevlar-29/epoxy composite laminated plates. Materials & Design, 43. pp. 89-98. ISSN 0261-3069

Abuhan, Mohd Fadhil and Mohamed Shariff, Abdul Rashid and Ghiyamat, Azadeh and Mahmud, Ahmad Rodzi (2013) Tracking elderly Alzheimer's patient using real time location system. Science Postprint, 1 (1). ISSN 2187-9834

Adam, Nor Mariah and Kwong, Qi Jie and Mohd Husin, Ezrin (2013) Field performance analysis of shoes used in the takraw games in Malaysia. Journal of Physical Science and Application, 3 (5). pp. 316-327. ISSN 2159-5348

Ahmad, Ashfaq A. and Idris, Azni and Hameed, Bassim H. (2013) Organic dye adsorption on activated carbon derived from solid waste. Desalination and Water Treatment, 51 (13-15). pp. 2554-2563. ISSN 1944-3994; ESSN: 1944-3986

Ahmad, Desa and B. G., Umara and A. S., Abdullahi and J. M., Dibal (2013) Effects of Salts Concentration on Emergence and Growth of Tomato (Lycopersicon Esculentum) in Tropical Areas. International Journal of Engineering and Innovative Technology, 3 (2). pp. 288-291. ISSN 2277-3754

Ahmad, Desa and Mohd Soom, Mohd Amin and Mohamed Shariff, Abd Rashid and Abdullahi, Abubakar Sadiq (2013) Characterization of rice (Oryza sativa) evapotranspiration using micro paddy lysimeter and class "A" pan in Tropical environments. Australian Journal of Crop Science, 7 (5). pp. 650-658. ISSN 1835-2693; ESSN:1835-2707

Ahmad, Desa and Othman, Jamarei and Sulaiman, Shamsuddin and Bola, Fashina Adepoju and Akande, Fatai Bukola (2013) Modelling of motion resistance ratios of pneumatic and rigid bicycle wheels. Pertanika Journal of Science & Technology, 21 (1). pp. 59-74. ISSN 0128-7680; ESSN: 2231-8526

Ahmad, Desa and Wayayok, Aimrun and Mohd Soom, Mohd Amin and Abdullahi, Abubakar Sadiq (2013) Spatial and Temporal Aspects of Evapotranspiration in Tanjung Karang Paddy Field, Peninsular Malaysia. International Journal of Science, Engineering and Technology Research, 2 (2). pp. 473-479. ISSN 2278-7798

Ahmad, Harlina and Idris, Azni and Omar, Mohd and Ismail, Norli (2013) In-sewer aerobic and anaerobic laboratory-scale degradation study of organic pollutants in sewage. Advanced Materials Research, 622-623. pp. 1655-1658. ISSN 1022-6680; ESSN: 1662-8985

Ahmad, Mohd Rozi and M. Yahya, Mohammad Harris and Hassan, Mohd Roshdi and Salleh, Jamil and Wan Ahmad, Wan Yunus and Hassim, Normala (2013) Production of shape memory alloy core-sheath friction yarns. Fibres and Textiles in Eastern Europe, 21 (3 (99)). pp. 68-72. ISSN 1230-3666

Ahmad, Nadzrol and Muniandy, Ratnasamy and Hassim, Salihudin and Aburkaba, Eltaher Elzarroug (2013) Development of interlocking chained plasti-beads for use in stone mastic asphalt. Australian Journal of Basic and Applied Sciences, 7 (11). pp. 466-474. ISSN 1991-8178

Ahmad, Omar and Hyder, Irfan and Iqbal, Rizwan and Azmi Murad, Masrah Azrifah and Mustapha, Aida and Mohd Sharef, Nurfadhlina and Mansoor, Muhammad (2013) A survey of searching and information extraction on a classical text using ontology-based semantics modeling: a case of Quran. Life Science Journal, 10 (4). pp. 1370-1377. ISSN 1097-8135; ESSN: 2372-613X

Ahmad, Salsabila and Shafie, Suhaidi and Ab Kadir, Mohd Zainal Abidin (2013) Power feasibility of a low power consumption solar tracker. Procedia Environmental Sciences, 17. pp. 494-502. ISSN 1878-0296

Ahmad, Salsabila and Shafie, Suhaidi and Ab Kadir, Mohd Zainal Abidin and Ahmad, Noor Syafawati (2013) On the effectiveness of time and date-based sun positioning solar collector in tropical climate: a case study in Northern Peninsular Malaysia. Renewable and Sustainable Energy Reviews, 28. pp. 635-642. ISSN 1364-0321; ESSN: 1879-0690

Ahmad Hazmi, Ahmad Syafiq and Aung, Min Min and Abdullah, Luqman Chuah and Salleh, Mek Zah and Mahmood, Mohd Hilmi (2013) Producing Jatropha oil-based polyol via epoxidation and ring opening. Industrial Crops and Products, 50. pp. 563-567. ISSN 0926-6690; ESSN: 1872-633X

Ahmad Saffian, Harmaen and Abdan, Khalina and Abd Rahman, Mohd Faizal and Mohammad Jawaid, (2013) Effect of triacetin on tensile properties of oil palm empty fruit bunch fiber-reinforced polylactic acid composites. Polymer-Plastics Technology and Engineering, 52 (4). pp. 400-406. ISSN 0360-2559; ESSN: 1525-6111

Ahmed Ali, Basheer A. and Salit, Mohd Sapuan and Zainudin, Edi Syams and Othman, Mohamed (2013) Java based expert system for selection of natural fibre composite materials. Journal of Food, Agriculture and Environment, 11 (3&4). pp. 1871-1877. ISSN 1459-0255; ESSN: 1459-0263

Ahmedov, Anvarjon and Nurullah, Ahmad Fadly and Rakhimov, Abdumalik (2013) Localization of fourier-laplace series of distributions. Malaysian Journal of Mathematical Sciences, 7 (2). pp. 315-326. ISSN 1823-8343; ESSN: 2289-750X

Ahmedov, Anvarjon A. and Abdul Sathar, Mohammad Hasan (2013) Numerical integration of the integrals based on Haar wavelets. Journal of Physics: Conference Series, 435. art. no. 012042. pp. 1-9. ISSN 1742-6588; ESSN: 1742-6596

Ahmedov, Anvarjon A. and Jamaludin, Nur Amalina and Rakhimov, Abdumalik (2013) Uniformly convergence of the spectral expansions of the Schrodinger operator on a closed domain. Journal of Physics: Conference Series, 435 (012014). pp. 1-7. ISSN 1742-6588; ESSN: 1742-6596

Ahmedov, Anvarjon A. and Rasedee, Ahmad Fadly Nurullah and Rakhimov, Abdumalik (2013) On the sufficient conditions of the localization of the Fourier-Laplace series of distributions from liouville classes. Journal of Physics: Conference Series, 435. art. no. 012016. pp. 1-9. ISSN 1742-6588

Ahsan, Amimul and Ghazali, Abdul Halim and Thomas, Ukwuani Anayo and Imteaz, Monzur (2013) A Low Cost Solar Still for Pure Water Production. Journal of Food, Agriculture and Environment, 11 (2). pp. 990-994. ISSN 1459-0255

Ahsan, Amimul and Imteaz, Monzur Alam and Dev, Rahul and Arafat, Hassan A. (2013) Numerical models of solar distillation device: present and previous. Desalination, 311. pp. 173-181. ISSN 0011-9164; ESSN: 1873-4464

Ahsan, Amimul and Rahman, Ataur M Abdul and Shanableh, Abdallah M. and Nik Daud, Nik Norsyahariati and Mohammed, Thamer Ahmed and Mabrouk, Abdel Nasser A. (2013) Life cycle cost analysis of a sustainable solar water distillation technique. Desalination and Water Treatment, 51 (40-42). pp. 7412-7419. ISSN 1944-3994; ESSN: 1944-3986

Ahsan, Amimul and Rahman, Md. Mukhlesur and Mohd Salleh, Mohamad Amran and Ismail, Nurhana and Imteaz, Monzur A. and A. Rahman, and Mohammad, Noor (2013) Municipal solid waste recycling in Malaysia: present scenario and future prospects. Fresenius Environmental Bulletin, 22 (12a). pp. 3654-3664. ISSN 1018-4619

Ahsan, Amimul and T., Arunkumar and R., Jayaprakash and D., Denkenberger and Okundamiya, Michael S. (2013) Effect of water and air flow on concentric tubular solar water desalting system. Applied Energy, 103 (2013). pp. 109-115. ISSN 0306-2619

Aji, Isuwa Suleiman and Zainudin, Edi Syams and Mohd Dahlan, Khairul Zaman and Abdan, Khalina and Salit, Mohd Sapuan (2013) Induced tensile properties with EB- cross linking of hybridized kenaf/palf reinforced HDPE composite. Pertanika Journal of Science & Technology, 21 (1). pp. 135-140. ISSN 0128-7680

Al-Alimi, Abdulmoghni Ali Wazea and Yaacob, Mohd. Hanif and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir and Al-Mansoori, Mohammed Hayder and Mokhtar, Makhfudzah (2013) Simple multiwavelength Brillouin-Erbium-doped fiber laser structure based on short SSMF. Optics Communications, 300. pp. 8-11. ISSN 0030-4018; ESSN: 1873-0310

Al-Alimi, Abdulmoghni Ali Wazea and Yaacob, Mohd. Hanif and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir and Mokhtar, Makhfudzah and Al-Mansoori, Mohammed Hayder (2013) 150-channel four wave mixing based multiwavelength Brillouin-erbium doped fiber laser. IEEE Photonics Journal, 5 (4). art. no. 1501010 . pp. 1-10. ISSN 1943-0655

Al-Azzawi, Alaa Khamees and Saripan, M. Iqbal and O. K. Rahmat, Rahmita Wirza (2013) Wavelet neural network for vector prediction to fill-in missing image blocks in wireless transmission. Arabian Journal for Science and Engineering, 38 (12). pp. 3309-3320. ISSN 1319-8025; ESSN: 2191-4281

Al-Ghaili, Abbas Mohammed Ali and Mashohor, Syamsiah and Ramli, Abdul Rahman and Ismail, Alyani (2013) Vertical-edge-based car-license-plate detection method. IEEE Transactions on Vehicular Technology, 62 (1). pp. 26-38. ISSN 0018-9545

Al-Jubari, Ammar Mohammed and Othman, Mohamed and Mohd Ali, Borhanuddin and Abdul Hamid, Nor Asilah Wati (2013) An adaptive delayed acknowledgment strategy to improve TCP performance in multi-hop wireless networks. Wireless Personal Communications, 69 (1). pp. 307-333. ISSN 0929-6212; ESSN: 1572-834X

Al-Kouri, Omar and Al-Fugara, A’kif and Al-Rawashdeh, Samih and Sadoun, Balqies and Pradhan, Biswajeet (2013) Geospatial modeling for sinkholes hazard map based on GIS & RS data. Journal of Geographic Information System, 5 (6). pp. 584-592. ISSN 2151-1950; ESSN: 2151-1969

Al-Masri, Ahmed Naufal A. and Ab Kadir, Mohd Zainal Abidin and Hizam, Hashim and Mariun, Norman (2013) A novel implementation for generator rotor angle stability prediction using an adaptive artificial neural network application for dynamic security assessment. IEEE Transactions on Power Systems, 28 (3). pp. 2516-2525. ISSN 0885-8950

Al-Mshreqi, Ahmed Mohammed Shamsan Saleh and Mohd Ali, Borhanuddin and Mohamad, Hafizal and A. Rasid, Mohd Fadlee and Ismail, Alyani (2013) RRSEB: a reliable routing scheme for energy-balancing using a self-adaptive method in wireless sensor networks. KSII Transactions on Internet and Information Systems, 7 (7). pp. 1585-1609. ISSN 1976-7277

Al-Obaidi, Mohammed Mahmoud Ahmad and Ali, Salmiaton and Wan Ab. Karim Ghani, Wan Azlina and Mohd Salleh, Mohamad Amran and Yap, Taufiq Yun Hin (2013) Preparation and characterization of Malaysian dolomites as a tar cracking catalyst in biomass gasification process. Journal of Energy, 2013. art. no. 791582. pp. 1-8. ISSN 2356-735X; ESSN: 2314-615X

Al-Qazwini, Yusser A. Taqi and Muhammad Noor, Ahmad Shukri and M. Thirunavakkarasu, Punithavathi and Sadrolhosseini, Amir Reza (2013) Investigation of the performance of an SPR-based optical fiber sensor using finite-difference time domain. Current Applied Physics, 13 (7). pp. 1354-1358. ISSN 1567-1739

Al-Saegh, Ali Mohammed and Sali, Aduwati and Jit Singh, Mandeep Singh and Ismail, Alyani (2013) Extracted atmospheric impairments on earth-sky signal quality in tropical regions at Ku-band. Journal of Atmospheric and Solar-Terrestrial Physics, 104. pp. 96-105. ISSN 1364-6826; ESSN: 1879-1824

Al-Surmi, Ibrahim and Othman, Mohamed and Abdul Hamid, Nor Asila Wati and Mohd Ali, Borhanuddin (2013) Enhancing inter-PMIPv6-domain for superior handover performance across IP-based wireless domain networks. Wireless Networks, 19 (6). pp. 1317-1336. ISSN 1022-0038; ESSN: 1572-8196

Al-Surmi, Ibrahim and Othman, Mohamed and Abdul Hamid, Nor Asila Wati and Mohd Ali, Borhanuddin (2013) Latency low handover mechanism considering data traffic lost preventing for proxy mobile IPv6 over WLAN. Wireless Personal Communications, 70 (1). pp. 459-499. ISSN 0929-6212; ESSN: 1572-834X

Alajerami, Yasser Saleh Mustafa and Hashim, Suhairul and Ghoshal, Sib Krishna and Mohammed Saleh, Muneer Aziz and Kadni, Taiman and Saripan, M. Iqbal and Alzimami, Khalid Sulaiman and Ibrahim, Zuhairi and Bradley, David Andrew (2013) The effect of TiO2 and MgO on the thermoluminescence properties of a lithium potassium borate glass system. Journal of Physics and Chemistry of Solids, 74 (12). pp. 1816-1822. ISSN 0022-3697; ESSN: 1879-2553

Alajerami, Yasser Saleh Mustafa and Hashim, Suhairul and Ramli, Ahmad Termizi and Mohammed Saleh, Muneer Aziz and Abdul Kadir, Ahmad Bazlie and Saripan, M. Iqbal (2013) Dosimetric characteristics of a LKB:Cu,Mg solid thermoluminescence detector. Chinese Physics Letters, 30 (1). art. no. 017801. pp. 1-4. ISSN 0256-307X

Alajerami, Yasser Saleh Mustafa and Hashim, Suhairul and Ramli, Ahmad Termizi and Saleh, Muneer Aziz and Saripan, M. Iqbal and Alzimami, Khalid Sauliman and Ung, Ngie Min (2013) Thermoluminescence responses of photon- and electron-irradiated lithium potassium borate co-doped with Cu+Mg or Ti+Mg. Applied Radiation and Isotopes, 78. pp. 21-25. ISSN 0969-8043; ESSN: 1872-9800

Ali, Salmiaton and Harun, Mohd Razif and Idris, Azni and Bashir, Muhammad Tariq (2013) Health Effects Associated with Fluoridated Water Sources - A Review of Central Asia. Asian Journal of Water, Environment and Pollution, 10 (3). pp. 29-37. ISSN 0972-9860

Ali, Salmiaton and Harun, Mohd Razif and Idris, Azni and Bashir, Muhammad Tariq and Ghauri, Moinuddin (2013) Impact Of Excessive Nitrogen Fertilizers On The Environment And Associated Mitigation Strategies. Asian Journal of Microbiology, Biotechnology & Environmental Sciences, 15 (2). pp. 213-221. ISSN 0972-3005

Ali, Salmiaton and Mohd. Idris, Aida Isma and Mansor, Hazmin (2013) Toxicity immobilization of refinery sludge containing heavy metals via vitrification process. International Journal of Research in Engineering and Technology, 2 (10). pp. 153-157. ISSN 2321-7308; ESSN: 2319-1163

Alvan, Habibeh Valizadeh and Azad, Farid Haydari and Mansor, Shattri (2013) Latent heat flux and air temperature anomalies along an active fault zone associated with recent Iran earthquakes. Advances in Space Research, 52 (9). pp. 1678-1687. ISSN 0273-1177

Amiri, Fazel and Pradhan, Biswajeet and Mohamed Shariff, Abd Rashid and Khoda Krami, Loghman and Sefiyanian, Alireza and Tabatabaie, Tayebeh (2013) Spatial patterns of heavy metals in soil under different geological structures and landuses for assessing metal enrichments. Environmental Monitoring and Assessment, 185 (12). pp. 9871-9888. ISSN 0167-6369

Anuar, Mohd Shamsul and Ariff, Arbakariya and Yusof, Yus Aniza and Chen, Soo Kien and Pau, Loke Show and Mohamad Annuar, Mohamad Suffian and Tau, Chuan Ling (2013) Recovery of lipase derived from Burkholderia cenocepacia ST8 using sustainable aqueous two-phase flotation composed of recycling hydrophilic organic solvent and inorganic salt. Separation and Purification Technology, 110. pp. 112-118. ISSN 1383-5866

Anuar, Mohd Shamsul and Mohd Tahir, Suraya and Mohamad, N. S. and Abu Bakar, N. (2013) Diametrical Elastic Relaxation During Ejection of lactose-cocoa binary tablets. Particulate Science and Technology, 31 (2). pp. 186-189. ISSN 0272-6351

Anuar, Mohd Shamsul and Mohd Tahir, Suraya and Taip, Farah Saleena and Mohd Amin, Mohd Cairul Iqbal (2013) Deformation and Mechanical Characteristics of Compacted Binary Mixtures of Plastic (Microcrystalline Cellulose), Elastic (Sodium Starch Glycolate), and Brittle (Lactose Monohydrate) Pharmaceutical Excipients. Particulate Science and Technology, 31 (6). pp. 561-567. ISSN 0272-6351

Arezoumand, Reza and Mashohor, Syamsiah and Marhaban, Mohammad Hamiruce (2013) Finding objects with segmentation strategy based multi robot exploration in unknown environment. Procedia - Social and Behavioral Sciences, 97. pp. 580-586. ISSN 1877-0428

Arunkumar, Thirugnanasambantham and Ahsan, Amimul (2013) Effect of water flow on concentrator coupled hemispherical basin solar still. International Journal of Applied and Natural Sciences, 2 (1). pp. 23-28. ISSN 2319-4014; ESSN: 2319-4022

Arunkumar, Thirugnanasambantham and Denkenberger, David C. and Ahsan, Amimul and Jayaprakash, Rajan N. (2013) The augmentation of distillate yield by using concentrator coupled solar still with phase change material. Desalination, 314. pp. 189-192. ISSN 0011-9164

Bachtiar, Dandi and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdan, Khalina and Mohd Dahlan, Khairul Zaman (2013) Thermal properties of alkali-treated sugar palm fibre reinforced high impact polystyrene composites. Pertanika Journal of Science & Technology, 21 (1). pp. 141-150. ISSN 0128-7680; ESSN: 2231-8526

Bahraminasab, Marjan and Jahan, Ali and Sahari, Barkawi and Arumugam, Manohar and Shamsborhan, Mahmoud and Hassan, Mohd Roshdi (2013) Using design of experiments methods for assesing peak contact pressure to material properties of soft tissue in human knee. Journal of Medical Engineering, 2013. art. no. 891759. pp. 1-11. ISSN 2314-5129; ESSN: 2314-5137

Bahraminasab, Marjan and Jahan, Ali and Sahari, Barkawi and Arumugam, Manohar and Shamsborhan, Mahmoud and Hassan, Mohd Roshdi (2013) Using design of experiments methods for assessing peak contact pressure to material properties of soft tissue in human knee. Journal of Medical Engineering, 2013. art. no. 891759. pp. 1-11. ISSN 2314-5129; ESSN: 2314-5137

Bahraminasab, Marjan and Sahari, Barkawi and Edwards, Kevin L. and Farahmand, Farzam and Arumugam, Manohar (2013) Aseptic loosening of femoral components - materials engineering and design considerations. Materials & Design, 44. pp. 155-163. ISSN 0261-3069

Bahraminasab, Marjan and Sahari, Barkawi and Edwards, Kevin L. and Farahmand, Farzam and Tang, Sai Hong and Naghibi, Hamid (2013) Material tailoring of the femoral component in a total knee replacement to reduce the problem of aseptic loosening. Materials & Design, 52. pp. 441-451. ISSN 0261-3069

Barakat, Osamah Lutf Hamood and Hashim, Shaiful Jahari and Raja Abdullah, Raja Syamsul Azmir and Ramli, Abdul Rahman and Hashim, Fazirulhisyam and Samsudin, Khairulmizam and Al-Baltah, Ibrahim Ahmed and Al-Habshi, Mohamed Mustafa (2013) SCARECROW: scalable malware reporting, detection and analysis. Journal of Convergence Information Technology, 8 (14). pp. 1-12. ISSN 1975-9320; ESSN: 2233-9299

Basmenj, Fazlollah Agamohamadi and Mohd Yusuff, Rosnah and Zulkifli, Norzima and Ismaiel, Yusof and Sorooshian, Shahryar (2013) Modeling approach to the elements of TQM practice. Advanced Materials Research, 711. pp. 719-721. ISSN 1022-6680; ESSN: 1662-8985

Baygi, Maassoumeh Javadi and Ramli, Abdul Rahman and Zaeri, Bahram and Mohd Ali, Borhanuddin (2013) An efficient innovative method to decrease routing table size in packet switched networks. International Journal of Advanced Research in Computer Science, 4 (10). pp. 68-76. ISSN 0976-5697

Bejo, Siti Khairunniza and Jamil, Norazlida (2013) Preliminary study on detection of fungal infection in stored paddy using thermal image. International Proceedings of Chemical, Biological and Environmental Engineering, 60. pp. 19-23. ISSN 2010-4618

Ben-Mubarak, Mohammed Awadh and Mohd Ali, Borhanuddin and Noordin, Nor Kamariah and Ismail, Alyani and Ng, Chee Kyun (2013) Mobile station movement direction prediction (MMDP) based handover scanning for mobile WiMAX system. Wireless Personal Communications, 73 (3). pp. 839-865. ISSN 0929-6212; ESSN: 1572-834X

Bheekhun, Nadiir and Abu Talib, Abd. Rahim and Hassan, Mohd Roshdi (2013) Aerogels in aerospace: an overview. Advances in Materials Science and Engineering, 2013. art. no. 406065. pp. 1-18. ISSN 1687-8434; ESSN: 1687-8442

Bil, Cees and Massey, Kevin and Abdullah, Ermira Junita (2013) Wing morphing control with shape memory alloy actuators. Journal of Intelligent Material Systems and Structures, 24 (7). pp. 879-898. ISSN 1045-389X; ESSN: 1530-8138

Bimakr, Mandana and Abdul Rahman, Russly and Taip, Farah Saleena and Mohd Adzahan, Noranizan and Sarker, Md. Zaidul Islam and Ganjloo, Ali (2013) Supercritical carbon dioxide extraction of seed oil from winter melon (Benincasa hispida) and its antioxidant activity and fatty acid composition. Molecules, 18 (1). pp. 997-1014. ISSN 1420-3049

Bimakr, Mandana and Abdul Rahman, Russly and Taip, Farah Saleena and Mohd Adzahan, Noranizan and Sarker, Zaidul Islam and Ganjloo, Ali (2013) Ultrasound-assisted extraction of valuable compounds from winter melon (Benincasa hispida) seeds. International Food Research Journal, 20 (1). pp. 331-338. ISSN 1985-4668; ESSN: 2231-7546

Biro, Khalid and Pradhan, Biswajeet and Buchroithner, Manfred and Makeschin, Franz (2013) Land use/land cover change analysis and its impact on soil properties in the northern part of Gadarif region, Sudan. Land Degradation & Development, 24 (1). pp. 90-102. ISSN 1085-3278; ESSN: 1099-145X

Boyer, Omid and Tang, Sai Hong and Pedram, Ali and Mohd Yusuff, Rosnah and Zulkifli, Norzima (2013) A mathematical model for the industrial hazardous waste location-routing problem. Journal of Applied Mathematics, 2013. art. no. 435272. pp. 1-10. ISSN 1110-757X; ESSN:1687-0042

Chan, Sook Wah and Mirhosseini, Hamed and Taip, Farah Saleena and Ling, Tau Chuan and Tan, Chin Ping (2013) Comparative study on the physicochemical properties of κ-carrageenan extracted from Kappaphycus alvarezii (doty) doty ex Silva in Tawau, Sabah, Malaysia and commercial κ-carrageenans. Food Hydrocolloids, 30 (2). pp. 581-588. ISSN 0268-005X; ESSN: 1873-7137

Chan, Sook Wah and Mirhosseini, Hamed and Taip, Farah Saleena and Tau, Chuan Ling and Tan, Chin Ping (2013) Stability of CoQ10-loaded oil-in-water (O/W) emulsion: effect of carrier oil and emulsifier type. Food Biophysics, 8 (4). pp. 273-281. ISSN 1557-1858; ESSN: 1557-1866

Che Mat, Ruzinoor and Mohamed Shariff, Abdul Rashid and Pradhan, Biswajeet and Mahmud, Ahmad Rodzi and Mohd Rahim, Mohd Shafry and Rehman, Amjad (2013) A comparison between four-tier framework and three-tier framework for online applications of 3D GIS visualization. Life Science Journal, 10 (3). pp. 1534-1540. ISSN 1097-8135; ESSN: 2372-613X

Che Pa, Nasrul Fikry and Chin, Nyuk Ling and Yusof, Yus Aniza and Abdul Aziz, Norashikin (2013) Measurement of bread crumb texture via imaging of its characteristics. Journal of Food, Agriculture and Environment, 11 (2). 48-55 . ISSN 1459-0255; ESSN: 1459-0263

Che Saffry, Zetty Azleen and Abdul Majid, Dayang Laila Abang and Romli, Fairuz Izzudin and Mustapha, Faizal and Abdullah, Ermira Junita (2013) Identification of modal properties of composite thin plate using OMA in wind tunnel environment. Applied Mechanics and Materials, 446-447. pp. 606-610. ISSN 1660-9336; ESSN: 1662-7482

Che Soh, Azura and Abdul Rahman, Ribhan Zafira and Md Sarkan, Haslina and Yeo, Lay Ting (2013) Intelligent control of twin-rotor MIMO system using fuzzy inference techniques. International Review of Automatic Control, 6 (1). pp. 35-46. ISSN 1974-6059; ESSN: 1974-6067

Che Soh, Azura and Abdul Wahab, Noor Izzri and Hassan, Mohd Khair and Mohammad Seifi, (2013) A Comparative Study of PV Models in Matlab/Simulink. World Academy of Science, Engineering and Technology, 74 (2). pp. 108-113. ISSN 2010-376X

Che Soh, Azura and Abdul Wahab, Noor Izzri and Hassan, Mohd Khair and Mohammad Seifi, (2013) Modeling of PV Standalone Microgrid Based on IEEE Standards, 1562-2007, 1361-2003 and 1013-2007. International Review on Computers and Software, 6 (2-Apr). pp. 515-525. ISSN 1974-9821

Che'Ya, Nik Norasma and Mohamed Shariff, Abd Rashid and Jahanshiri, Ebrahim and Mohd Soom, Mohd Amin and Khairunniza-Bejo, Siti and Mahmud, Ahmad Rodzi (2013) Web-based decision support system for paddy planting management. Pertanika Journal of Science & Technology, 21 (2). pp. 343-364. ISSN 0128-7680

Cheah, P. M. and Mohd Hanif, Ahmad Husni and Abd. Wahid, Samsuri and Abdullah, Luqman Chuah (2013) Short-term field decomposition of pineapple stump biochar in tropical peat soil. Malaysian Journal of Soil Science, 17. pp. 85-97. ISSN 1394-7990

Cheah, Willie and Hosseini, Soraya and Khan, Moonis Ali and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw (2013) Acid modified carbon coated monolith for methyl orange adsorption. Chemical Engineering Journal, 215-216. pp. 747-754. ISSN 1385-8947

Cheok, Choon Yoong and Chin, Nyuk Ling and Yusof, Yus Aniza and A. Talib, Rosnita and Law, Chung Lim (2013) Anthocyanin recovery from mangosteen (Garcinia mangostana L.) hull using lime juice acidified aqueous methanol solvent extraction. Food Science and Technology Research, 19 (6). pp. 971-978. ISSN 1344-6606

Chin, K. L. and H'ng, Paik San and Go, W. Z. and Lim, Tau Wai and Maminski, M. and Md. Tahir, Paridah and Abdullah, Luqman Chuah (2013) Optimization of torrefaction conditions for high energy density solid biofuel from oil palm biomass and fast growing species available in Malaysia. Industrial Crops and Products, 49. pp. 768-774. ISSN 0926-6690; ESSN: 1872-633X

Chin, Nyuk Ling and Yusof, Yus Aniza and A. Talib, Rosnita and Law, Chung Lim (2013) Optimization of total monomeric anthocyanin (TMA) and total phenolic content (TPC) extractions from mangosteen (Garcinia mangostana Linn.) hull using ultrasonic treatments. Industrial Crops and Products, 50 (1). pp. 1-7. ISSN 0926-6690

Chin, Nyuk Ling and Yusof, Yus Aniza and Teng, Li Yuen (2013) Rheological and textural studies of fresh and freeze-thawed native sago starche. Food Hydrocolloids, 31 (2). pp. 156-165. ISSN 0268-005X

Cholan, Noran Azizan and Al-Mansoori, Mohammed Hayder and Muhammad Noor, Ahmad Shukri and Ismail, Alyani and Mahdi, Mohd Adzir (2013) Multi-wavelength generation by self-seeded four-wave mixing. Optics Express, 21 (5). pp. 6131-6138. ISSN 1094-4087

Chong, Pik Han and Aziz, Mohammad Gulzarul and Yusof, Yus Aniza and Naim, Mohd Nazli and Chin, Nyuk Ling and Syed Muhammad, Sharifah Kharidah (2013) Modelling and determination of physico-chemical and morphological properties of microencapsulated red amaranth powder. Journal of the Institution of Engineers, Malaysia, 74 (2). pp. 1-10. ISSN 0126-513X

Choo, Adrian Cheng Yong and Md. Tahir, Paridah and Karimi, Alinaghi and Bakar, Edi Suhaimi and Abdan, Khalina and Ibrahim, Azmi and A. Bakar, Balkis Fatomer (2013) Study on the longitudinal permeability of oil palm wood. Industrial & Engineering Chemistry Research, 52 (27). pp. 9405-9410. ISSN 0888-5885; ESSN: 1520-5045

Chow, Yin Hui and Yap, Yee Jiun and Anuar, Mohd. Shamsul and Tejo, Bimo Ario and Ariff, Arbakariya and Show, Pau Loke and Ng, Eng Poh and Tau, Chuan Ling (2013) Interfacial partitioning behaviour of bovine serum albumin in polymer-salt aqueous two-phase system. Journal of Chromatography B: Analytical Technologies in the Biomedical and Life Sciences, 934. pp. 71-78. ISSN 1570-0232

Daqamseh, Salleh T. and Mansor, Shattri and Pradhan, Biswajeet and Billa, Lawal and Mahmud, Ahmad Rodzi (2013) Potential fish habitat mapping using MODIS-derived sea surface salinity, temperature and chlorophyll-a data: South China Sea Coastal areas, Malaysia. Geocarto International, 28 (6). pp. 546-560. ISSN 1010-6049; ESSN: 1752-0762

Darain, Kh Mahfuz ud and Rahman, A. B. M. S. and Ahsan, Amimul and Saiful Islam, A. B. M. and Yusuf, Badronnisa (2013) Brick manufacturing practice in Bangladesh: a review of energy efficacy and air pollution scenarios. Journal of Hydrology and Environment Research, 1 (1). pp. 60-69. ISSN 2201-7313

Darestani, Soroush Avakh and Houshyar, Afsaneh Noori and Ismail, Napsiah and Leman, Zulkiflle (2013) Improving purchasing performance by implementation of QMS process management approach in a manufacturing company. Advanced Materials Research, 622-623. pp. 1868-1872. ISSN 1022-6680; ESSN: 1662-8985

Darmawan, Rosli and Adam, Nor Mariah and Abdul Aziz, Nuraini and Mohd Ariffin, Mohd Khairol Anuar (2013) CFD simulation of natural convection in open pool reactor cooling system. Journal of Nuclear and Related Technologies, 10 (1). pp. 28-38. ISSN 1823-0180

Dauda, Solomon Musa and Ahmad, Desa and Abdan, Khalina and Othman, Jamarei (2013) Performance evaluation of a tractor mounted kenaf harvesting machine. Academic Research International, 4 (2). pp. 70-81. ISSN 2223-9944

Dezfouli, Mohammad Mehdi Salehi and Hassan, Mohd Roshdi and Ruslan, Mohd Hafidz and Mat, Sohif and Bakhtyar, B. (2013) Experimental and theoretical investigations of the impact localization of a passive smart composite plate fabricated using piezoelectric materials. Advances in Materials Science and Engineering, 2013. art. no. 326713. pp. 1-12. ISSN 1687-8434; ESSN: 1687-8442

Djojodihardjo, Harijono (2013) Computational simulation for analysis and synthesis of impact resilient structure. Acta Astronautica, 91. pp. 283-301. ISSN 0094-5765; ESSN: 1879-2030

Djojodihardjo, Harijono (2013) Progress and development of Coanda jet and vortex cell for aerodynamic surface circulation control - an overview. The SIJ Transactions on Advances in Space Research & Earth Exploration, 1 (1). pp. 32-42. ISSN 2347-6818; ESSN: 2347-6087

Djojodihardjo, Harijono (2013) Unified aerodynamic-acoustic formulation for aero-acoustic structure coupling. Journal of Mechanics Engineering and Automation, 3. pp. 208-219. ISSN 2159-5275; ESSN: 2159-5283

Djojodihardjo, Harijono and Abdul Hamid, Mohd Faisal (2013) Overview of Coandă jet lift enhancement and two-dimensional computational studies. ASEAN Engineering Journal Part A, 3 (1). pp. 39-57. ISSN 2229-127X

Djojodihardjo, Harijono and Abdul Hamid, Mohd Faisal and Jaafar, Abdul Aziz and Basri, Shahnor and Romli, Fairuz Izzudin and Mustapha, Faizal and Mohd Rafie, Azmin Shakrine and Abang Abdul Majid, Dayang Laila (2013) Computational study on the aerodynamic performance of wind turbine airfoil fitted with Coandă jet. Journal of Renewable Energy, 2013. art. no. 839319. pp. 1-17. ISSN 2314-4386; ESSN: 2314-4394

Djojodihardjo, Harijono and Kim, Ern Foong (2013) Conceptual Design and Aerodynamic Study of Joined-Wing Business Jet Aircraft. Journal of Mechanics and Automation Engineering, 3 (5). p. 16. ISSN 2159-5283

Djojodihardjo, Harijono and Prijono, Eddy (2013) Proof of concept MFD optimization of the aftbody geometry of axisymmetric slender body based on wave drag considerations. Journal of Mechanics Engineering and Automation, 3 (8). pp. 473-490. ISSN 2159-5275; ESSN: 2159-5283

Djojodihardjo, Harijono and Safari, Irtan (2013) BEM-FEM coupling for acoustic effects on aeroelastic stability of structures. Computer Modeling in Engineering and Sciences, 91 (3). pp. 205-234. ISSN 1526-1492; ESSN: 1526-1506

Dodangeh, Javad and Mohd Yusuff, Rosnah and Ismail, Napsiah and Ismail, Md. Yusof and Beik Zadeh, Mohammad Reza and Jassbi, Javad (2013) A review on major business excellence frameworks. Technics Technologies Education Management, 8 (1). pp. 301-309. ISSN 1840-1503

Ehsani, Maryam and Hamidon, Mohd Nizar and Lim, Kean Pah (2013) Influence of Pt on structural and morphologycal properties of La2O3/SnO2 thick film. Research Journal of Chemistry and Environment, 17 (10). pp. 35-40. ISSN 0972-0626; ESSN: 2278-4527

El Pebrian, Darius and Yahya, Azmi (2013) Mechanized system for in-field oil palm fresh fruit bunches collection-transportation. AMA, Agricultural Mechanization in Asia, Africa and Latin America, 44 (2). pp. 7-14. ISSN 0084-5841

El-Shekeil, Yousuf Ali and Salit, Mohd Sapuan and Md Deros, Mohd Azaman and Jawaid, Mohammad (2013) Optimization of blending parameters and fiber size of kenaf-bast-fiber-reinforced the thermoplastic polyurethane composites by Taguchi method. Advances in Materials Science and Engineering, 2013 ( ). art. no. 686452. pp. 1-5. ISSN 1687-8434

Elnashaie, Said Salah Eldin Hamed and Wan Ab. Karim Ghani, Wan Azlina and Mohd Salleh, Mohamad Amran and Awang Biak, Dayang Radiah and Ali, Salmiaton (2013) Sustainable development in chemical and biological engineering education. Procedia - Social and Behavioral Sciences, 102. pp. 490-498. ISSN 1877-0428

Elsheikh, Ranya and Mohamed Shariff, Abdul Rashid and Amiri, Fazel and Ahmad, Noordin and Balasundram, Siva Kumar and Mohd Soom, Mohd Amin (2013) Agriculture Land Suitability Evaluator (ALSE): a decision and planning support tool for tropical and subtropical crops. Computers and Electronics in Agriculture, 93. pp. 98-110. ISSN 0168-1699

Esmaile, Maher Faik and Marhaban, Mohammad Hamiruce and Mahmud, Rozi and Saripan, M. Iqbal (2013) Cross-sectional area calculation for arbitrary shape in the image using star algorithm with Green's theorem. IEEJ Transactions on Electrical and Electronic Engineering, 8 (5). pp. 497-504. ISSN 1931-4973; ESSN: 1931-4981

Fadaeifard, Firouz and Gharavi, Farhad and Matori, Khamirul Amin and Daud, Abdul Razak and Mohd Ariffin, Mohd Khairol Anuar and Awang, Mokhtar (2013) Investigation of microstructure and mechanical properties of friction stir lap welded AA6061-T6 in various welding speeds. Journal of Applied Sciences, 14 (3). pp. 221-228. ISSN 1812-5654; ESSN: 1812-5662

Falatoonitoosi, Elham and Leman, Zulkiflle and Sorooshian, Shahryar (2013) Modeling for green supply chain evaluation. Mathematical Problems in Engineering, 2013. art. no. 201208. pp. 1-9. ISSN 1024-123X; ESSN: 1563-5147

Falatoonitoosi, Elham and Leman, Zulkiflle and Sorooshian, Shahryar and Salimi, Meysam (2013) Decision-making trial and evaluation laboratory. Research Journal of Applied Sciences, Engineering and Technology, 5 (13). pp. 3476-3480. ISSN 2040-7459; ESSN: 2040-7467

Farrita, Nur Erniwati and Jaafar, Haslina and Mohd Sidek, Mohd Hasimi and Wan Hasan, Wan Zuha and Ahmad, Siti Anom (2013) Development of low cost semi-automatic parallel parking system. International Journal of Engineering and Technology, 10 (2). pp. 67-72. ISSN 1823-1039

Fatchurrohman, Nanang and Sulaiman, Shamsuddin and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2013) Generic framework for conceptual design using concurrent engineering strategy. A case study: advanced material application - product development of metal matrix composite component. Advanced Materials Research, 626. pp. 99-108. ISSN 1022-6680; ESSN: 1662-8985

Fatchurrohman, Nanang and Sulaiman, Shamsuddin and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2013) New technique for conceptual selection of manufacturing process and material, case study: metal matrix composite component. Advanced Materials Research, 789. pp. 82-86. ISSN 1022-6680; ESSN: 1662-8985

Fazli, Pardis and Che Man, Hasfalina and Md. Shah, Umi Kalsom and Idris, Azni (2013) Characteristics of methanogens and methanotrophs in rice fields: a review. Asia Pacific Journal of Molecular Biology and Biotechnology, 21 (1). pp. 3-17. ISSN 0128-7451

Firoozi, Zahra and Ismail, Napsiah and Ariafar, Shahram and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Memariani, Azizollah (2013) Distribution network design for fixed lifetime perishable products: a model and solution approach. Journal of Applied Mathematics, 2013. art. no. 891409. pp. 1-13. ISSN 1110-757X; ESSN:1687-0042

Firoozi, Zahra and Tang, Sai Hong and Ariafar, Shahram and Mohd Ariffin, Mohd Khairol Anuar (2013) An optimization approach for a joint location inventory model considering quantity discount policy. Arabian Journal for Science and Engineering, 38 (4). pp. 983-991. ISSN 1319-8025; ESSN: 2191-4281

Fulazzaky, Mohamad Ali and Khamidun, Mohd Hairul and Yusuf, Badronnisa (2013) Sediment traps from synthetic construction site stormwater runoff by grassed filter strip. Journal of Hydrology, 502. pp. 53-61. ISSN 0022-1694

Ganjeh, Babak and Hassan, Mohd Roshdi (2013) Cost-efficient composite processing techniques for aerospace applications – a review. Applied Mechanics and Materials, 325-326. pp. 1465-1470. ISSN 1660-9336; ESSN: 1662-7482

Ghaemi, Ferial and Yunus, Robiah and Ahmadian, Ali and Salahshour, Soheil and Suleiman, Mohamed and Saleh, Shanti Faridah (2013) Application of fuzzy fractional kinetic equations to modelling of the acid hydrolysis reaction. Abstract and Applied Analysis, 2013. art. no. 610314. pp. 1-19. ISSN 1085-3375; ESSN: 1687-0409

Ghauri, Moinuddin and Inayat, Abrar and Bashir, Muhammad Tariq and Ali, Salmiaton and Cliffe, Keith R. (2013) High pressure oxydesulphurisation of coal—a parametric study. Energies, 6 (4). pp. 1930-1943. ISSN 1996-1073

Ghobakhloo, Morteza and Tang, Sai Hong (2013) The role of owner/manager in adoption of electronic commerce in small businesses: the case of developing countries. Journal of Small Business and Enterprise Development, 20 (4). pp. 754-787. ISSN 1462-6004; ESSN: 1758-7840

Ghobakhloo, Morteza and Tang, Sai Hong and Zulkifli, Norzima (2013) Adoption of mobile commerce: the impact of end user satisfaction on system acceptance. International Journal of E-Services and Mobile Applications, 5 (1). pp. 26-50. ISSN 1941-627X; ESSN: 1941-6288

Ghobakhloo, Morteza and Tang, Sai Hong and Zulkifli, Norzima and Mohd Ariffin, Mohd Khairol Anuar (2013) An integrated framework of green supply chain management implementation. International Journal of Innovation, Management and Technology, 4 (1). pp. 86-89. ISSN 2010-0248

Golshan, Abolfazl and Ghodsiyeh, Danial and Gohari, Soheil and Ayob, Amran and Baharudin, B. T. Hang Tuah (2013) Computational inteligence in optimization of machining operation parameters of ST-37 steel. Applied Mechanics and Materials, 248. pp. 456-461. ISSN 1660-9336; ESSN: 1662-7482

Gomes, Chandima and Cooray, Vernon and Ab Kadir, Mohd Zainal Abidin (2013) Vertical electric fields and field change parameters due to partly inclined lightning leader channels. Progress In Electromagnetics Research, 135. pp. 55-80. ISSN 1070-4698; ESSN: 1559-8985

Hamed Elnashaie, Said Salah Eldin and Ahmadun, Fakhru'l-Razi and Ismail, Mohd Halim Shah and Danafar, Firoozeh and Baojahmadi, Mina (2013) Bioreactors Land-Fills (BRLFs) for Waste Treatment. (1) Its Main Characteristics and Advantages. Journal of Purity, Utility Reaction & Environment, 2 (5). pp. 115-132. ISSN 2232-1179

Hameed Sultan, Mohamed Thariq and Mohd Rafie, Azmin Shakrine and Yidris, Noorfaizal and Mustapha, Faizal and Zahari, Rizal (2013) Damage classification in CFRP laminates using the NDT/E approach. NDT Spectra (7). pp. 217-224. ISSN 2231-9891

Hamid, Hussain and Arintono, Sulistyo and Law, Teik Hua and Salehi, Soulmaz and Davoodi, Seyed Rasoul (2013) Effects of Traffic and Road Factors on Motorcycling Safety Perception. Proceedings of the Institution of Civil Engineers - Transport, 166 (5). pp. 289-293. ISSN 0965-092X

Hamid, Hussain and Azari, Kian Ahmadi and Arintono, Sulistyo and Davoodi, Seyed Rasoul (2013) Evaluation of demand for different trip purposes under various congestion pricing scenarios. Journal of Transport Geography, 29 (May). pp. 43-51. ISSN 0966-6923

Hamid, Hussain and Davoodi, Seyed Rasoul (2013) Motorcyclist Braking Performance in Stopping Distance Situations. Journal of Transportation Engineering, 139 (7). pp. 660-666. ISSN 0733-947X

Hamid, Hussain and Faezi, Seyed Farzin and Sanij, Hamed Khani (2013) Development of Service Performance Model for Exclusive Motorcycle Lanes. Science International, 25 (3). pp. 461-468. ISSN 1013-5316

Hanamoto, Tsuyoshi and Yamada, Hiroaki and Mailah, Nashiren Farzilah and Misron, Norhisam (2013) Controller design using coefficient diagram methods for matrix converter based unified power flow controllers. Journal of the Japan Society of Applied Electromagnetics and Mechanics, 21 (3). pp. 369-374. ISSN 0919-4452; ESSN: 2187-9257

Haron, Md. Jelas and Jahangirian, Hossein and Ismail, Mohd. Halim Shah and Rafiee-Moghaddam, Roshanak and Rezayi, Majid and Shameli, Kamyar and Gharayebi, Yadollah and Abdollahi, Yadollah and Peyda, Mazyar and Mahdavi, Behnam (2013) Antifungal properties of phenyl fatty hydroxamic acids and their copper complexes synthesized based on canola and palm kernel oils. Asian Journal of Chemistry, 25 (8). pp. 4183-4188. ISSN 0970-7077

Haron, Nuzul Azam and Liew, Cindy (2013) Factors Influencing the Rise of House Price in Klang Valley. International Journal of Research in Engineering and Technology (IJRET), 2 (10). pp. 261-272. ISSN 2319-1163

Harsono, Soni Sisbudi and Grundman, Philipp and Lek, Hang Lau and Hansen, Anja and Mohd Salleh, Mohamad Amran and Meyer-Aurich, Andreas and Idris, Azni and Mohd Ghazi, Tinia Idaty (2013) Energy balances, greenhouse gas emissions and economics of biochar production from palm oil empty fruit bunches. Resources, Conservation and Recycling, 77. pp. 108-115. ISSN 0921-3449

Harun, Harlisya and Agil, Halid and Abdul Rashid, Ruhaida (2013) Improvements of Signal Gain for MEASAT-2 and MEASAT-3 using Orbital Diversity under Rain Attenuation: A Simulation Approach. International Journal of Scientific and Engineering Research, 4 (7). pp. 367-372. ISSN 2229-5518

Harun, Harlisya and Dimyati, Kaharudin and Ungku Chulan, Ungku Azmi Iskandar (2013) Optimal generator matrix G. Aerospace Science and Technology, 24 (1). pp. 136-140. ISSN 1270-9638; ESSN: 1626-3219

Harun, Harlisya and Ungku Chulan, Ungku Azmi Iskandar and Khazani, Khamizon (2013) Improving the evaluation performance of space-time trellis code through STTC visualisation tool. International Journal of Science, Technology and Society, 1 (1). pp. 19-23. ISSN 2330-7412; ESSN: 2330-7420

Hasan, Intan Helina and Ramli, Abdul Rahman and Ahmad, Siti Anom and Osman, Rosiah (2013) P300-based EEG signal interpretation system for robot navigation control. World Applied Sciences Journal, 26 (5). pp. 566-572. ISSN 1818-4952; ESSN: 1991-6426

Hashim, Norhashila and Osman, Azizah and Janius, Rimfiel and Shitan, Mahendran and Abdul Rahman, Russly and Zude, Manuela (2013) Application of computer vision in the detection of chilling injury in bananas. Pertanika Journal of Science & Technology, 21 (1). pp. 111-118. ISSN 0128-7680; ESSN: 2231-8526

Hashim, Norhashila and Osman, Azizah and Janius, Rimfiel and Shitan, Mahendran and Abdul Rahman, Russly and Zude, Manuela and Pflanz, Michael and Regen, Christian (2013) An approach for monitoring the chilling injury appearance in bananas by means of backscattering imaging. Journal of Food Engineering, 116 (1). pp. 28-36. ISSN 0260-8774

Hassan, Mohamed P. and Mohd Rafie, Azmin Shakrine (2013) New metal fuselage section arrangement minimize assembly time. International Journal of Engineering Research & Technology, 2 (8). pp. 1611-1615. ISSN 2278-0181

Hassan, Mohd Ali and Yee, Lian Ngit and Phang, Lai Yee and Ariffin, Hidayah and Abdul Rahim, Raha and Shirai, Yoshihito and Sudesh, Kumar (2013) Sustainable production of polyhydroxyalkanoates from renewable oil-palm biomass. Biomass and Bioenergy, 50. pp. 1-9. ISSN 0961-9534; ESSN: 1873-2909

Hedayati, Mahdi and Mariun, Norman and Hizam, Hashim and Bahari, Samsul (2013) Design of robust controller for STATCOM applied to large induction motor using normalized coprime factorization approach. Arabian Journal for Science and Engineering, 38 (10). pp. 2713-2723. ISSN 1319-8025; ESSN: 2191-4281

Hejazi, Farzad and Fateh, Amir and Behnia, Arash and Zabihi, Alireza (2013) Behavior of external column- wide beam joint with different bar arrangement and existence of joint shear link under gravity. Caspian Journal of Applied Sciences Research, 2 (2). pp. 120-130. ISSN 2251-9114

Hejazi, Farzad and Jaafar, Mohd Saleh and Fateh, Amir and Omer, Abdilahi Bashir (2013) Seismic Response Evaluation of Reinforced Structure with Embedded Viscous Damper in Shear Wall. International Journal of Advancements Civil Structural and Environmental Engineering, 1 (1). pp. 109-112.

Hejazi, Farzad and Toloue, Iraj and Jaafar, Mohd Saleh and Noorzaie, Jamaloddin (2013) Optimization of earthquake energy dissipation system by genetic algorithm. Computer-Aided Civil and Infrastructure Engineering, 28 (10). pp. 796-810. ISSN 1093-9687; ESSN: 1467-8667

Hezarjaribi, Yadollah and Hamidon, Mohd Nizar (2013) Reactive ion etching of 4H-SiC using SF6/O2 for MEMS application. The International Journal of Engineering and Science, 2 (2). pp. 87-92. ISSN 2319–1805; ESSN: 2319–1813

Hezarjaribi, Yadollah and Hamidon, Mohd Nizar (2013) Theoretical formulation to evaluate capacitance for before and after touch point MEMS capacitive pressure sensors. The International Journal of Engineering and Science, 2 (1). pp. 278-286. ISSN 2319–1805; ESSN: 2319-1813

Hisham, Hisham Kadhum and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir and Muhammad Noor, Ahmad Shukri (2013) Linewidth characteristics of un-cooled fiber grating Fabry–Perot laser controlled by the external optical feedback. Optik, 124 (14). pp. 1763-1766. ISSN 0030-4026; ESSN: 1618-1336

Hitam, Salasiah and Abu Bakar, Muhammad Hafiz and Mahdi, Mohd Adzir and Abd Rahman, Zubaidah and Al-Mansoori, Mohammed Hayder and Mahamd Adikan, Faisal Rafiq (2013) Capacity enhancement of virtual-mirror-based multiwavelength Brillouin-Erbium fiber laser. Microwave and Optical Technology Letters, 55 (11). pp. 2549-2553. ISSN 0895-2477

Hosseini, Soraya and Eftekhari, Ehsan and Soltani, Salman Masoudi and Memar, Amir and Babadi, Farahnaz Eghbali and Jamnani, Bahador Dastorian and Ismail, Mohd Halim Shah and Minggu, Lorna Jeffery (2013) Effect of intermediate layer in photocurrent improvement of three-layer photoanodes using WO3 and Fe2O3. Journal of Environmental Chemical Engineering, 1 (4). pp. 1309-1314. ISSN 2213-3437

Hussein, Ahmed S. and Ahmadun, Fakhru'l-Razi and Abdullah, Norhafizah (2013) Preparation and characterization of Poly (D,L-lactide-co-glycolide) (PLGA) nanoparticles loaded with linamarin for controlled drug release. International Journal of Polymer Analysis and Characterization, 18 (6). pp. 414-422. ISSN 1023-666X; ESSN: 1563-5341

Ibrahim, Abu Hatim and Leman, Zulkiflle and Salit, Mohd Sapuan (2013) Tensile properties of impregnated sugar palm (Arenga pinnata) fibre composite filled thermosetting polymer composites. Advanced Materials Research, 701. pp. 8-11. ISSN 1022-6680; ESSN: 1662-8985

Ibrahim, Mohd Nordin and Ab. Aziz, Norashikin and Sarker, Md. Sazzat Hossain and Punan, Mohd Salleh (2013) Drying kinetics,energy consumption, and quality of paddy (MAR-219) during drying by industrial inclined bed dryer with or without the fluidized bed dryer. Drying Technology, 31 (3). pp. 286-294. ISSN 0737-3937

Ibrahim, Mohd Nordin and Rashti, Kobra Tajaddodi Talab and Spotar, Sergei and Syed Muhammad, Sharifah Kharidah and A. Talib, Rosnita (2013) Desorption isotherm model for a Malaysian rough rice variety (MR219). Pertanika Journal of Tropical Agricultural Science, 36 (2). pp. 189-198. ISSN 1511-3701; ESSN: 2231-8542

Ibrahim, Mohd Nordin and Syed Muhammad, Sharifah Kharidah and A. Talib, Rosnita and Talab, Kobra Tajaddodi and Spotar, Sergei (2013) Effects of Airflow Reversal in Fixed Bed Drying of Rough Rice on HRY and Drying Performance. Transactions of the ASABE, 56 (4). pp. 1485-1493. ISSN 2151-0032

Idrees, Mohammed and Mohd Shafri, Helmi Zulhaidi and Saeidi, Vahideh (2013) Imaging spectroscopy and light detection and ranging data fusion for urban features extraction. American Journal of Applied Sciences, 10 (12). pp. 1575-1585. ISSN 1546-9239; ESSN: 1554-3641

Imteaz, Monzur Alam and Ahsan, Amimul and Rahman, Ataur and Mekanik, Fatemeh (2013) Modelling stormwater treatment systems using MUSIC: accuracy. Resources, Conservation and Recycling, 71. pp. 15-21. ISSN 0921-3449; ESSN: 1879-0658

Imteaz, Monzur Alam and Ahsan, Amimul and Shanableh, Abdallah (2013) Reliability analysis of rainwater tanks using daily water balance model: variations within a large city. Resources, Conservation and Recycling, 77. pp. 37-43. ISSN 0921-3449; ESSN: 1879-0658

Inayatullah, Othman and Jamaludin, Nordin and Mohd Nor, Mohd Jailani (2013) Application of Acoustic Emission Technique to Monitor the Viscosity of Single Grade Diesel Engine Lubricant Oil. Advanced Science Letters, 19 (-). pp. 216-220. ISSN 1936-6612

Inayatullah, Othman and Mohammad, Mazian and Abdullah, Shahrum and Jamaluddin, Nordin (2013) Acoustic Emission Evaluation of Fatigue Life Prediction for a Carbon Steel Specimen using a Statistical-Based Approach. Materials Testing, 55 (6). pp. 487-495. ISSN 0025-5300

Inayatullah, Othman and Mohammad, Mazian and Abdullah, Shahrum and Jamaluddin, Nordin and Mohd Nopiah, Zulkifli (2013) Fatigue Failure Assessment of Metallic Specimens using the Acoustic Emission Technique. Materials Testing, 55 (4). pp. 310-318. ISSN 0025-5300

Ishak, Asnor Juraiza and Che Soh, Azura and Ashaari, Mohamad Asmi (2013) Position control of arm mechanism using PID controller. Journal of Theoretical and Applied Information Technology, 47 (2). pp. 798-806. ISSN 1992-8645; ESSN: 1817-3195

Ishak, Asnor Juraiza and Shamsudin, Rosnah and Wan Hassan, Wan Zuha and Zulkefli, Nurnazeera (2013) Design of weight grader for pineapple. International Journal of Engineering and Technology, 10 (2). pp. 82-89. ISSN 1823-1039

Ishak, Mohamad Ridzwan and Leman, Zulkiflle and Salit, Mohd Sapuan and Ab. Rahman, Mohamad Zaki and Anwar, U. M. K. (2013) Chemical composition and FT-IR spectra of sugar palm (Arenga pinnata) fibers obtained from different heights. Journal of Natural Fibers, 10 (2). pp. 83-97. ISSN 1544-0478; ESSN: 1544-046X

Ishak, Mohamad Ridzwan and Leman, Zulkiﬂle and Salit, Mohd Sapuan and Abd Rahman, Mohd Zaki and Uyup, Mohd Khairun Anwar and Akhtar, Riaz (2013) IFSS, TG, FT-IR spectra of impregnated sugar palm (Arenga pinnata) ﬁbres and mechanical properties of their composites. Journal of Thermal Analysis and Calorimetry, 111 (2). pp. 1375-1383. ISSN 1388-6150

Ishola, Tajudeen Abiodun and Yahya, Azmi and Mohammed Shariff, Abdul Rashid and Abd Aziz, Samsuzana (2013) An RFID-based variable rate technology fertilizer applicator for tree crops. Journal of Applied Sciences, 13 (3). pp. 409-415. ISSN 1812-5654; ESSN: 1812-5662

Ishola, Tajudeen Abiodun and Yahya, Azmi and Mohammed Shariff, Abdul Rashid and Abd Aziz, Samsuzana and Chow, Syh Chuan (2013) Effects of operational variables on rotary valve metering system for a variable rate technology fertilizer applicator for oil palm. Journal of Applied Sciences, 13 (3). pp. 479-484. ISSN 1812-5654; ESSN: 1812-5662

Islam, Syed Zahurul and Mariun, Norman and Othman, Mohammad Lutfi and Hizam, Hashim and Zainal Abidin, Izham (2013) Dynamic communication for smart metering: leading edge for sustainable energy and PHEV. Advanced Materials Research, 805-806. pp. 1107-1115. ISSN 1022-6680; ESSN: 1662-8985

Ismail, Alyani and Sali, Aduwati and Hashim, Fazirulhisyam (2013) A New Super Wideband Fractal Monopole-Dielectric Resonator Antenna. IEEE Antennas and Wireless Propagation Letters, 12 (2013). pp. 1014-1016. ISSN 1536-1225

Ismail, Alyani and Sali, Aduwati and Mohd Ali, Borhanuddin and Khatun, Sabira (2013) Reduced-rank technique for joint channel estimation in TD-SCDMA systems. International Journal of Electronics, 100 (2). pp. 274-287. ISSN 0020-7217

Ismail, I. and Anuar, Mohd Shamsul and Shamsuddin, Rosnah (2013) Effect on the physico-chemical properties of liberica green coffee beans under ambient storage. International Food Research Journal, 20 (1). pp. 255-264. ISSN 1985-4668; ESSN: 2231-7546

Ismail, Mohd Halim Shah and Abdullah, Luqman Chuah and Yunus, Robiah and Jusoh, Emiliana Rose and Wan Abdul Rahman, Wan Aizan (2013) Effect of Crude Palm Oil as Plasticizer on the Mechanical and Morphology Properties of Low Density Polyethylene Blown Film. International Journal of Materials Engineering Innovation, 4 (3). pp. 302-313. ISSN 1757-2754

Ismail, Mohd Halim Shah and Syam, Syafiie and Siajam, Shamsul Izhar and Dalang, Shazryenna (2013) A Study on Zeolite Performance in Waste Treating Ponds for Treatment of Palm Oil Mill Effluent. Journal of Water Resource and Protection, 5 (7A). pp. 18-27. ISSN 1945-3108

Ismail, Mohd Halim Shah and Xiao, Tian Zhang and Mohd Lazim, Mohammed Firdaus (2013) Removal of Boron and Arsenic from Petrochemical Wastewater by Using Aquatic Booster as Adsorbent. Polish Journal of Environmental Studies, 22 (2). pp. 403-408. ISSN 1230-1485

Ismail, Mohd Idris Shah and Okamoto, Yasuhiro and Okada, Akira (2013) Neural network modeling for prediction of weld bead geometry in laser microwelding. Advances in Optical Technologies, 2013. art. no. 415837. pp. 1-7. ISSN 1687-6393; ESSN: 1687-6407

Ismail, Mohd Idris Shah and Okamoto, Yasuhiro and Okada, Akira and Uno, Yoshiyuki and Mukhtar, Muhaizad (2013) Micro-Welding Of High Thermal Conductive Material Aluminum-Graphite Composite By Pulsed ND:YAG Laser. Journal of Laser Micro / Nanoengineering, 8 (1). pp. 90-96. ISSN 1880-0688

Ismail, Mohd Shahrom and Baharudin, B. T. Hang Tuah and Yahya, S. A. and Kahar, H. A. (2013) Finite element analysis of composite cylinder with centre cutout under axial load and internal pressure. Advanced Materials Research, 701. pp. 425-429. ISSN 1022-6680; ESSN: 1662-8985

Ismail, Napsiah and Baharudin, B. T. Hang Tuah and Musa, Yusaini and Leman, Zulkiflle (2013) Overall equipment effectiveness improvement through total productive maintenance in assembly cell. International Journal of Customer Relationship Marketing and Management, 4 (1). pp. 13-27. ISSN 1947-9247; ESSN: 1947-9255

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Hajikhani, Maryam (2013) Considering on the ground reflection effect on the electromagnetic fields due to lightning channel. Journal of Electrical Engineering and Technology, 8 (4). pp. 824-831. ISSN 1975-0102; ESSN: 2093-7423

Jaafar, Che Nor Aiza and Zainol, Ismail and Harun, Mohd and Ahmad Yazid, Aznijar (2013) Relationship between the microstructure and property of Al-0.21wt% Mg-0.41wt% Si alloy. Malaysian Journal of Microscopy, 9. pp. 42-46. ISSN 1823-7010

Jaafar, Haslina and Isa, Maryam and Hamidon, Mohd Nizar and Shafie, Suhaidi and Wan Hassan, Wan Zuha and Hawary, Ahmad Faizul and Chong, M. H. (2013) An Experiment of Thick Film Force Sensor Using MEMS Simulation Software. Journal of Theoretical and Applied Information Technology, 47 (3). pp. 902-910. ISSN 1992-8645

Jaafar, Mohd Saleh and Yardim, Yavuz and Thanoon, Waleed Abdulmalik and Laseima, Saleh Yhya (2013) AAC-concrete light weight precast composite floor slab. Construction and Building Materials, 40. pp. 405-410. ISSN 0950-0618

Jahangirian, Hossein and Haron, Md Jelas and Ismail, Mohd Halim Shah and Rafiee Moghaddam, Roshanak and Afsah Hejri, Leili and Abdollahi, Yadollah and Rezayi, Majid and Vafaei, Nazanin (2013) Well diffusion method for evaluation of antibacterial activity of copper phenyl fatty hydroxamate synthesized from canola and palm kernel oils. Digest Journal of Nanomaterials and Biostructures, 8 (3). pp. 1263-1270. ISSN 1842-3582

Jalal, Ali Sadeq Abdulhadi and Ismail, Alyani and Alhawari, Adam Reda Hasan and A. Rasid, Mohd Fadlee and Noordin, Nor Kamariah and Mahdi, Mohd Adzir (2013) Miniaturized metal mount Minkowski fractal RFID tag antenna with complementary split ring resonator. Progress in Electromagnetics Research C, 39. pp. 25-36. ISSN 1937-8718

Jamaludin, Siti Nur Sakinah and Mustapha, Faizal and Nuruzzaman, Dewan Muhammad and Basri, Shah Nor (2013) A review on the fabrication techniques of functionally graded ceramic-metallic materials in advanced composites. Scientific Research and Essays, 8 (21). art. no. 7960EB927795. pp. 828-840. ISSN 1992-2248

Japar, Sahari and Salit, Mohd Sapuan and Zainudin, Edi Syams and Maleque, Md Abdul (2013) Flexural and impact properties of biopolymer derived from sugar palm tree. Advanced Materials Research, 701. pp. 225-228. ISSN 1022-6680; ESSN: 1662-8985

Jassim, Zuhir Ali and Ali, Nisreen N. and Mustapha, Faizal and Abdul Jalil, Nawal Aswan (2013) A review on the vibration analysis for a damage occurrence of a cantilever beam. Engineering Failure Analysis, 31. pp. 442-461. ISSN 1350-6307; ESSN: 1873-1961

Kakahy, Amer N. N. and Ahmad, Desa and Akhir, M. D. and Sulaiman, Shamsuddin and Aris, Ishak (2013) Effects of cutting speeds and moisture content on grass chopping (pulverizing). Advanced Science Letters, 19 (9). pp. 2533-2535. ISSN 1936-6612; ESSN: 1936-7317

Kakahy, Amer N. N. and Ahmad, Desa and Akhir, M. D. and Sulaiman, Shamsuddin and Aris, Ishak (2013) Effects of feeding angles and cutting speeds of a mower knife with serrated edges on the pulverization of sweet potato vines. Advanced Materials Research, 626. pp. 260-264. ISSN 1022-6680; ESSN: 1662-8985

Kakahy, Amer Najat Najmaldeen and Ahmad, Desa and Hamid, Md. Akhir and Sulaiman, Shamsuddin and Aris, Ishak (2013) Effects of knife shapes and cutting speeds of a mower on the percentage pulverization of sweet potato vine. Applied Mechanics and Materials, 421. pp. 29-33. ISSN 1660-9336; ESSN: 1662-7482

Kamarudin, Suryani and Kalil, Mohd Sahaid and Takrif, Mohd Sobri and Wan Yusoff, Wan Mohtar and Awang Biak, Dayang Radiah and Hasan, Norhasliza (2013) Different media formulation on biocellulose production by Acetobacter xylinum (0416). Pertanika Journal of Science & Technology, 21 (1). pp. 29-36. ISSN 0128-7680; ESSN: 2231-8526

Kanagesan, Samikannu and Hashim, Mansor and Subramani, Tamilselvan and Mohammed Alitheen, Noorjahan Banu and Ismail, Ismayadi and Hajalilou, Abdollah and Kaiser, Ahsanul (2013) Synthesis, characterization, and cytotoxicity of iron oxide nanoparticles. Advances in Materials Science and Engineering, 2013. art. no. 710432. pp. 1-7. ISSN 1687-8434; ESSN: 1687-8442

Karim, Roselina and Chin, Nyuk Ling and Mohd Ghazali, Hasanah and Shakerardekani, Ahmad (2013) Textural, Rheological and Sensory Properties and Oxidative Stability of Nut Spreads-A Review. International Journal of Molecular Sciences, 14 (2). pp. 4223-4241. ISSN 1422-0067

Karimi, Abbas and Abedini, S. M. and Zarafshan, Faraneh and Syed Mohamed, Syed Abdul Rahman Al-Haddad (2013) Cluster head selection using fuzzy logic and chaotic based genetic algorithm in wireless sensor network. Journal of Basic and Applied Scientific Research, 3 (4). pp. 694-703. ISSN 2090-4304; ESSN: 2090-4215

Karimi, Abbas and Kiamanesh, B. and Zarafshan, Faraneh and Syed Mohamed, Syed Abdul Rahman Al-Haddad (2013) Markov process modeling for wireless sensor network availability with QOS constraints. Applied Mechanics and Materials, 330. pp. 1054-1058. ISSN 1660-9336; ESSN: 1662-7482

Kek, Siok Peng and Chin, Nyuk Ling and Yusof, Yus Aniza (2013) Direct and indirect power ultrasound assisted pre-osmotic treatments in convective drying of guava slices. Food and Bioproducts Processing, 91 (4). pp. 495-506. ISSN 0960-3085; ESSN: 1744-3571

Kerdegari, Hamideh and Samsudin, Khairulmizam and Ramli, Abdul Rahman and Ghotoorlar, Saeid Mokaram (2013) Development of wearable human fall detection system using multilayer perceptron neural network. International Journal of Computational Intelligence Systems, 6 (1). pp. 127-136. ISSN 1875-6891; ESSN: 1875-6883

Keshani, Samaneh and Wan Daud, Wan Ramli and Woo, Meng Wai and Mobarekeh, Mohsen Nourouzi and Meor Talib, Meor Zainal and Abdullah, Luqman Chuah and Abdul Rahman, Russly (2013) Reducing the deposition of fat and protein covered particles with low energy surfaces. Journal of Food Engineering, 116 (3). pp. 737-748. ISSN 0260-8774

Kh. Mahfuz ud Darain, and Ahsan, Amimul and Islam, A. B. M. Saiful (2013) Assessing structural damages of a heritage building. Research in Civil and Environmental Engineering, 1 (4). pp. 226-233. ISSN 2345-3109

Khakpour, Reza and Hamidon, Mohd Nizar and Vandenbosch, Guy A. E. (2013) Development of an auto-calibrated interfacing circuit for thick film multi-gas sensor. Sensors and Actuators A: Physical, 204. pp. 48-57. ISSN 0924-4247; ESSN: 1873-3069

Khaksar, Weria and Tang, Sai Hong and Khaksar, Mansoor and Motlagh, Omid Reza Esmaeili (2013) A low dispersion probabilistic roadmaps (LD-PRM) algorithm for fast and efficient sampling-based motion planning. International Journal of Advanced Robotic Systems, 10. art. no. 397. pp. 1-10. ISSN 1729-8814; ESSN: 1729-8806

Kharazi, Seyed Mohammad Saleh Seyedzadeh and Sahbudin, Ratna Kalos Zakiah and Abas, Ahmad Fauzi and Ahmad Anas, Siti Barirah (2013) Fiber non-linear effects in multiple-wavelengths optical CDMA systems. IETE Technical Review, 30 (2). pp. 149-156. ISSN 0256-4602; ESSN: 0974-5971

Khmag, Asem and Ramli, Abdul Rahman and Hashim, Shaiful Jahari and Syed Mohamed, Syed Abdul Rahman Al-Haddad (2013) Review of image denoising algorithms based on the wavelet transformation. International Journal of Advanced Trends in Computer Science and Engineering, 2 (5). pp. 1-8. ISSN 2278-3091

Khodapanah, Nasrin and Ahamad, Intan Salwani and Idris, Azni (2013) Potential of using bio-coagulants indigenous to Malaysia for surface water clarification. Research Journal of Chemistry and Environment, 17 (9). pp. 70-75. ISSN 0972-0626; ESSN: 2278-4527

Khor, Ling Si and Leman, Zulkiflle and Lee, Ching Hao (2013) Interfacial debonding force and shear strength of sugar palm (Arenga pinnata) fiber reinforced composites by pull-out test. Advanced Materials Research, 634-638. pp. 1931-1936. ISSN 1022-6680; ESSN: 1662-8985

Khuzaimah, Zailani and Ismail, Mohd Hasmadi and Mansor, Shattri (2013) The impaction biodiversity disturbance in mangrove ecosystemonsocio-economic activities in Sg Merbok Forest Reserve. International Geoinformatics Research and Development Journal, 4 (4). ISSN 0976-1241; ESSN: 1927-3665

Kim Huat, Bujang and Abdul Aziz, Farah Nora Aznieta and Mohammed, Thamer Ahmed and Kazemian, Sina and Prasad, Arun (2013) Stabilization of Tropical Peat by Chemical Grout. Journal of the Chinese Institute of Engineers, 36 (1). pp. 114-128. ISSN 0253-3839

Kim Huat, Bujang and Kalantari, Behzad and Prasad, Arun (2013) Cement and Silica Fume Treated Columns to Improve Peat Ground. Arabian Journal for Science and Engineering, 38 (4). pp. 805-816. ISSN 1319-8025

Kim Huat, Bujang and Moayedi, Hussein and Kazemian, Sina (2013) Shear Strength Parameters of Improved Peat by Chemical Stabilizer. Geotechnical and Geological Engineering, 31 (4). pp. 1089-1106. ISSN 0960-3182

Kumar, Mahendra and Khan, Moonis Ali and Al-Othman, Zeid A. and Choong, Thomas Shean Yaw (2013) Recent developments in ion-exchange membranes and their applications in electrochemical processes for in situ ion substitutions, separation and water splitting. Separation and Purification Reviews, 42 (3). pp. 187-261. ISSN 1542-2119; ESSN: 1542-2127

Kundu, Prodip and Zakaria, Rabitah and Chakma, Amit and Feng, Xianshe (2013) Analysis of permeate pressure build-up effects on separation performance of asymmetric hollow fiber membranes. Chemical Engineering Science, 104. pp. 849-856. ISSN 0009-2509; ESSN: 1873-4405

Larki, Farhad and Dehzangi, Arash and Saion, Elias and Abedini, Alam and Hutagalung, Sabar D. and Abdullah, A. Makarimi (2013) Simulation of transport in laterally gated junctionless transistors fabricated by local anodization with an atomic force microscope. Physica Status Solidi (A) Applications and Materials Science, 210 (9). pp. 1914-1919. ISSN 1862-6300; ESSN: 1862-6319

Law, Teik Hua and K. C. Mani, Kulanthayan and Wong, Shaw Voon and Ng, Choy Peng (2013) Factors related to seatbelt-wearing among rear-seat passengers in Malaysia. Accident Analysis and Prevention, 50. pp. 351-360. ISSN 0001-4575

Law, Teik Hua and Noland, Robert B. and Evans, Andrew W. (2013) Factors Associated with the Enactment of Safety Belt and Motorcycle Helmet Laws. Risk Analysis, 33 (7). pp. 1367-1378. ISSN 0272-4332

Lee, Chih Fang and Abdullah, Mohd Zulkifly and Ahmad, Kamarul Arifin and Shuaib, Ibrahim Lutfi (2013) Standardization of Malaysian adult female nasal cavity. Computational and Mathematical Methods in Medicine, 2013. art. no. 519071. pp. 1-11. ISSN 1748-670X; ESSN: 1748-6718

Lee, Hwei Voon and Yap, Taufiq Yun Hin and Hussein, Mohd Zobir and Yunus, Robiah (2013) Transesterification of jatropha oil with methanol over Mg–Zn mixed metal oxide catalysts. Energy, 49. pp. 12-18. ISSN 0360-5442; ESSN: 1873-6785

Lee, Teang Shui and Chandio, Abdul Samad and Mirjat, Muhammad Saffar (2013) Simulation of horizontal and vertical drainage systems to combat waterlogging problem along the Rohri canal in Khairpur district, Pakistan. Journal of Irrigation and Drainage Engineering, ASCE, 139 (9). pp. 710-717. ISSN 0733-9437

Lee, Teang Shui and Galavi, Hadi and Mirzaei, Majid and Valizadeh, Nariman (2013) Klang River Level Forecasting Using ARIMA and ANFIS Models. Journal American Water Works Association, 105 (9). pp. 496-506. ISSN 2164-4535

Lee, Teang Shui and Goodarzi, Ehsan and Ziaei, Mina (2013) Dam Overtopping risk using probabilistic concepts - Case Study: The Meijaran Dam, Iran. Ain Shams Engineering Journal, 2013 (4). pp. 185-197. ISSN 2090-4479

Leman, Zulkiflle and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Abdul Rahman, Mohd Rosdzimin and Uyup, Mohd Khairun Anwar and Siregar, Januar Parlaungan (2013) Sugar palm (Arenga pinnata): Its fibres, polymers and composites. Carbohydrate Polymers, 91 (2). pp. 699-710. ISSN 0144-8617

Lioe, De Xing and Shafie, Suhaidi and Ramiah, Harikrishnan and Sulaiman, Nasri and Abdul Halin, Izhal (2013) Low power transmitter for wireless capsule endoscope. Journal of Physics: Conference Series, 423. art. no. 012038. pp. 1-6. ISSN 1742-6588; ESSN: 1742-6596

Lok, Chung Yee and Mustapa Kamal, Siti Mazlina and Baharudin, B. T. Hang Tuah (2013) Development of an integrated grating and slicing machine for starchy vegetables. Journal of Food, Agriculture and Environment, 11 (1). pp. 141-145. ISSN 1459-0255; ESSN: 1459-0263

M Abd Halim, Abdul Ssomad and Razali, Mohd Hudzari and Noordin, M. N. A. and Abdullah, Soran Jalal and Salit, Mohd Sapuan and Hassan, S. (2013) Simulation and analysis for harvesting Dioscorea hispida tubers. Advanced Materials Research, 626. pp. 459-463. ISSN 1022-6680; ESSN: 1662-8985

M. Abd Halim, Abdul Ssomad and Razali, Mohd Hudzari and Mohd Noor, Noordin Asimi and Salit, Mohd Sapuan and Ngah, Norhayati and Abdullah, Soran Jalal (2013) Finite element analysis for stress distribution of hand tool harvester. Procedia Engineering, 68. pp. 219-224. ISSN 1877-7058

M. Ali, A. H. and Sobri, Shafreeza and Ali, Salmiaton and Md. Yasin, Faizah (2013) Recovery of heavy metals from spent etching waste solution of printed circuit board (PCB) manufacturing. Pertanika Journal of Science & Technology, 21 (2). pp. 375-386. ISSN 0128-7680; ESSN: 2231-8526

M. Nasir, Ismail and Mohd. Ghazi, Tinia Idaty and Omar, Rozita and Idris, Azni (2013) Anaerobic digestion of cattle manure: influence of inoculum concentration. International Journal of Engineering and Technology, 10 (1). 22 - 26. ISSN 1823-1039

Mahdavi, Farzaneh Akhavan and Ahmad, Siti Anom and Marhaban, Mohammad Hamiruce and Akbarzadeh Totonchi, Mohammad Reza (2013) The utility of wavelet transform in surface electromyography feature extraction - a comparative study of different mother wavelets. International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, 7 (2). pp. 82-87. ISSN 1307-6892

Mahdi, Lamya M. J. and Muniandy, Ratnasamy and Yunus, Robiah and Hasham, Salihudin and Aburkaba, Eltaher (2013) Effect of short term aging on organic montmorillonite nanoclay modified asphalt. Indian Journal of Science and Technology, 6 (11). pp. 5434-5442. ISSN 0974-6846; ESSN: 0974-5645

Mahdi, Mohd Adzir and Abas, Ahmad Fauzi and Hitam, Salasiah and A. H., Sulaiman and A. K., Zamzuri (2013) Flatness investigation of multiwavelength SOA fiber laser based on intensity-dependent transmission mechanism. Optics Communications, 291 (-). pp. 264-268. ISSN 0030-4018

Mahdi, Mohd Adzir and Ismail, Alyani and Muhammad Noor, Ahmad Shukri and Cholan, Noran Azizan and Al-Mansoori, Mohammed Hayder (2013) Flattening effect of four wave mixing on multiwavelength Brillouin-erbium fiber laser. Applied Physics B: Lasers and Optics, 112 (2). pp. 215-221. ISSN 0946-2171

Mahdi, Mohd Adzir and Mokhtar, Makhfudzah and Hitam, Salasiah and Yeo, Kwok Shien and Mahamd Adikan, Faisal Rafiq (2013) Continuous wave tunable fiber optical parametric oscillator with double-pass pump configuration. Applied Physics B: Lasers and Optics, 110 (3). pp. 353-357. ISSN 0946-2171

Mahdi, Mohd Adzir and Mokhtar, Makhfudzah and Hitam, Salasiah and Yeo, Kwok Shien and Mahamd Adikan, Faisal Rafiq (2013) Gain smoothening filter in two-segment fiber-optical parametric amplifier. Optics Communications, 286 (1). pp. 353-356. ISSN 0030-4018

Mamdoohi, Ghazaleh and Sarmani, Abdul Rahman and Abas, Ahmad Fauzi and Yaacob, Mohd. Hanif and Mokhtar, Makhfudzah and Mahdi, Mohd Adzir (2013) 20 GHz spacing multi-wavelength generation of Brillouin-Raman fiber laser in a hybrid linear cavity. Optics Express, 21 (16). pp. 18724-18732. ISSN 1094-4087

Mamdoohi, Ghazaleh and Sarmani, Abdul Rahman and Yaacob, Mohd. Hanif and Mokhtar, Makhfudzah and Mahdi, Mohd Adzir (2013) Multi-wavelength Brillouin-Raman fiber laser utilizing enhanced nonlinear amplifying loop mirror design. Optics Express, 21 (26). pp. 31800-31808. ISSN 1094-4087

Manap, Zahariah and Mohd Ali, Borhanuddin and Ng, Chee Kyun and Noordin, Nor Kamariah and Sali, Aduwati (2013) A review on hierarchical routing protocols for wireless sensor networks. Wireless Personal Communications, 72 (2). pp. 1077-1104. ISSN 0929-6212; ESSN: 1572-834X

Mansoor, Muhammad and Mariun, Norman and Ismail, Napsiah and Abdul Wahab, Noor Izzri and Toudeshki, Arash Mohammadi and Iqbal, Rizwan and Mohamed Aslam, Mohamed Saleem (2013) Probing potential of knowledge engineering support for electrical engineers – a case study. Life Science Journal, 10 (2). pp. 2714-2720. ISSN 1097-8135; ESSN: 2372-613X

Mansor, Hasmah and Mohd Noor, Samsul Bahari (2013) Design of QFT-based self-tuning deadbeat controller. World Academy of Science, Engineering and Technology, 7 (7). pp. 1276-1278. ISSN 2010-3778

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdul Aziz, Nuraini and Arep @ Ariff, Hambali (2013) Stiffness prediction of hybrid kenaf/glass fiber reinforced polypropylene composites using rule of mixtures (ROM) and rule of hybrid mixtures (RoHM). Journal of Polymer Materials, 30 (3). pp. 321-334. ISSN 0973-8622; ESSN: 0976-3449

Mansor, Shattri and Mohd Shafri, Helmi Zulhaidi and Al-doski, Jwan (2013) Monitoring Land Cover Changes in Halabja City, Iraq. International Journal of Sensor and Related Networks (IJSRN), 1 (1). pp. 20-30. ISSN 2320-5571

Mansor, Shattri and Mohd Shafri, Helmi Zulhaidi and Al-doski, Jwan (2013) NDVI Differencing and Post-classification to Detect Vegetation Changes in Halabja City, Iraq. IOSR Journal of Applied Geology and Geophysics (IOSR-JAGG), 1 (2). 10-Jan. ISSN 2321-0982

Mansor, Shattri and Mohd Shafri, Helmi Zulhaidi and Al-doski, Jwan (2013) War Impacts Studies Using Remote Sensing. IOSR Journal of Applied Geology and Geophysics (IOSR-JAGG), 1 (2). 15-Nov. ISSN 2321-0982

Mariun, Norman and Abdul Wahab, Noor Izzri and Ismail, Napsiah and Mansoor, Muhammad (2013) A Guidance chart for most probable solution directions in sustainable energy developments. Renewable and Sustainable Energy Reviews, 24 (1). art. no. 23. pp. 306-313. ISSN 1364-0321

Mariun, Norman and Esfandiari, Ehsan (2013) Experimental results of 47-level switch-ladder multilevel inverter. IEEE Transactions on Industrial Electronics , 60 (11). pp. 4960-4967. ISSN 0278-0046

Marzook, Ali Kamil and Ismail, Alyani and Mohd Ali, Borhanuddin and Sali, Aduwati and Khalaf, Mohannad H. and Khatun, Sabira (2013) Reduced rank technique for joint channel estimation and joint data detection in TD-SCDMA systems. Wireless Personal Communications, 69 (4). pp. 1629-1646. ISSN 0929-6212; ESSN: 1572-834X

Marzook, Ali Kamil and Ismail, Alyani and Mohd Ali, Borhanuddin and Sali, Aduwati and Khatun, Sabira (2013) Singular value decomposition rank-deficient-based estimators in TD-SCDMA systems. Circuits, Systems, and Signal Processing, 32 (1). pp. 205-221. ISSN 0278-081X; ESSN: 1531-5878

Mashohor, Syamsiah and Kenari, Seyed Ali Jafari (2013) Robust committee machine for water saturation prediction. Journal of Petroleum Science and Engineering, 104 (April). 10-Jan. ISSN 0920-4105

Mashohor, Syamsiah and Ramli, Abdul Rahman and Saripan, M. Iqbal and Mahmud, Rozi and Jalalian, Afsaneh and Karasfi, Babak (2013) Computer-aided detection/diagnosis of breast cancer in mammography and ultrasound: a review. Clinical Imaging, 37 (3). pp. 420-426. ISSN 0899-7071

Mat Jusoh, Suriani and Ali, Aidy and Salit, Mohd Sapuan and Abdan, Khalina (2013) Aspect of fatigue analysis of composite materials: a review. Pertanika Journal of Science & Technology, 21 (1). pp. 1-14. ISSN 0128-7680; ESSN: 2231-8526

Mat Nawi, Nazmi and Chen, Guangnan and Jensen, Troy (2013) Visible and shortwave near infrared spectroscopy for predicting sugar content of sugarcane based on a cross-sectional scanning method. Journal of Near Infrared Spectroscopy, 21 (4). pp. 289-297. ISSN 0967-0335

Mat Nawi, Nazmi and Jensen, Troy and Chen, Guangnan (2013) Application of spectroscopic method to predict sugar content of sugarcane internodes. Journal of Tropical Agriculture and Food Science, 41 (2). pp. 211-220. ISSN 1394-9829; ESSN: 2289-9650

Md Deros, Mohd. Azaman and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Zainudin, Edi Syams and Abdan, Khalina (2013) Shrinkages and warpage in the processability of wood-filled polypropylene composite thin-walled parts formed by injection molding. Materials & Design, 52. pp. 1018-1026. ISSN 0261-3069

Md Yunus, Nurul Amziah and Green, Nicolas G. and Nili, Hossein (2013) Continuous Separation of Colloidal Particles using Dielectrophoresis. Electrophoresis, 34 (7). pp. 969-978. ISSN 0173-0835; ESSN: 1522-2683

Md Yusoff, Zainuddin and Ngwenya, Bryne and Parsons, Ian (2013) Mobility and fractionation of REEs during deep weathering of geochemically contrasting granites in a tropical setting, Malaysia. Chemical Geology, 349-350. pp. 71-86. ISSN 0009-2541

Md. Aziz, Shazed and Abdul Rashid, Suraya and Mohd Salleh, Mohamad Amran (2013) Theoretical prediction of CNT-CF/PP composite tensile properties using various numerical modeling methods. Fullerenes, Nanotubes and Carbon Nanostructures, 21 (5). pp. 411-416. ISSN 1536-383X; ESSN: 1536-4046

Md. Idris, Aida Isma and Ab Razak, Putri Razreena and Omar, Rozita and Idris, Azni (2013) Performance of membrane bioreactor (MBR) in high phosphate wastewater. International Journal of Environmental, Ecological, Geological and Geophysical Engineering, 7 (1). pp. 38-42. ISSN 2010-3778

Md. Rahim, Mohd Syazwan and Haron, Nuzul Azam (2013) Construction cost comparison between conventional and formwork system for condominium project. International Journal of Advanced Studies in Computer Science and Engineering, 2 (5). pp. 19-25. ISSN 2278-7917

Md. Tahir, Paridah and Abdullah, Luqman Chuah and Mohamad, Rosfarizan and Hong Ng, Sim and Choo , Adrian Cheng Yong and Yan, Yee Liong (2013) Effect of pretreatment process on bioconversion of kenaf (hibiscus cannabinus l.) core to glucose. BioResources, 8 (2). pp. 2010-2017. ISSN 1930-2126

Md. Yunos, Khairul Faezah and Samsu Baharuddin, Azhari and Mohd Dom, Zanariah and Azmi, Nazatul Shima (2013) The effect of operating parameters on ultrafiltration and reverse osmosis of palm oil mill effluent for reclamation and reuse of water. BioResources, 8 (1). pp. 76-87. ISSN 1930-2126

Megat Mohd Noor, Megat Johari and Mohamed, Ezzuldin Hasan and Mohammad Ali, Thamer Ahmad and Ghazali, Abdul Halim (2013) Effect of the packaging and storage conditions on the coagulation activity of spray-dried salt-extracted Moringa oleifera. Desalination and Water Treatment, 51 (7-9). pp. 1947-1953. ISSN 1944-3994; ESSN: 1944-3986

Misron, Norhisam and Aris, Ishak and Ahmad, Desa and Sidek, Roslina and Harun, Noor Hasmiza and Hiroyuki, Wakiwaka and Kunihisa, Tashiro (2013) Investigations On A Novel Inductive Concept Frequency Technique For The Grading Of Oil Palm Fresh Fruit Bunches. Sensors, 13 (2). pp. 2254-2266. ISSN 1424-8220

Moayedfar, Majid and Leman, Zulkiflle and Mirabi, Hamed and Baharudin, B. T. Hang Tuah (2013) The effect of forming parameters on the sheet stretch in incremental sheet forming (ISF) process on CNC lathe machine. Advanced Materials Research, 634-638. pp. 2894-2898. ISSN 1022-6680; ESSN: 1662-8985

Moazami, Dariush and Md Yusoff, Zainuddin and Muniandy, Ratnasamy and Hamid, Hussain (2013) Effect of stabilizers on stiffness modulus of soil layers: a review. International Journal of Physical Sciences, 8 (32). pp. 1602-1610. ISSN 1992-1950

Mobarekeh, Mohsen Nourouzi and Chuah, Teong Guan and Choong, Thomas Shean Yaw (2013) Removal of glyphosate from water: applying coupled Sequencing Batch Reactor (SBR)-adsorption method. Caspian Journal of Applied Sciences Research, 2 (6). pp. 33-42. ISSN 2251-9114

Moghbel, Mehrdad and Mashohor, Syamsiah (2013) A review of computer assisted detection/diagnosis (CAD) in breast thermography for breast cancer detection. Artificial Intelligence Review, 39 (4). pp. 305-313. ISSN 0269-2821; ESSN: 1573-7462

Mohamad, Khairul Azhar and Zainudin, Edi Syams and Salit, Mohd Sapuan and Zahari, Nur Ismarrubie and Ali, Aidy (2013) Fatigue life for type 316L stainless steel under cyclic loading. Advanced Materials Research, 701. pp. 77-81. ISSN 1022-6680; ESSN: 1662-8985

Mohamed, Mohd Shamzi and Tan, Joo Shun and Mohamad, Rosfarizan and Mokhtar, Mohd Noriznan and Ariff, Arbakariya (2013) Comparative analyses of response surface methodology and artificial neural network on medium optimization for Tetraselmis sp. FTC209 grown under mixotrophic condition. The Scientific World Journal, 2013. art. no. 948940. pp. 1-14. ISSN 2356-6140; ESSN: 1537-744X

Mohamed Ariff, Azmah Hanim and Ourdjini, Ali and Idris, Siti Rabiatul Aisha and Osman, Saliza Azlina (2013) Effect of isothermal aging 2000 hours on intermetallics formed between Ni-Pd-Au with Sn-4Ag-0.5Cu solders. Advanced Materials Research, 650. pp. 194-199. ISSN 1022-6680; ESSN: 1662-8985

Mohamed Shariff, Abd Rashid and Mahmud, Ahmad Rodzi and Aouache, Mustapha (2013) Oil Plam Fruit Classification Using Spectrometer. Advanced Science Letters, 19 (9). pp. 2651-2653. ISSN 1936-6612

Mohamed Shariff, Abd Rashid and Pradhan, Biswajeet and Mahmud, Ahmad Rodzi and Che Mat, Ruzinoor and Mohd Rahim, Mohd Shafry (2013) An effective visualization and comparison of online terrain draped with multi-sensor satellite images. Arabian Journal of Geosciences, 6 (12). pp. 4881-4889. ISSN 1866-7511

Mohammadpoor, Mojtaba and Raja Abdullah, Raja Syamsul Azmir and Ismail, Alyani and Abas, Ahmad Fauzi (2013) Foreign object detection based on circular bistatic synthetic aperture radar. Progress In Electromagnetics Research, 134. pp. 301-322. ISSN 1070-4698; ESSN: 1559-8985

Mohammadpoor, Mojtaba and Raja Abdullah, Raja Syamsul Azmir and Salah, Asem A. and Al-Dabbagh, Mohanad Dawood (2013) A bistatic linear frequency modulated radar for on-the-ground object detection. Electromagnetics, 33 (2). pp. 153-177. ISSN 0272-6343; ESSN: 1532-527X

Mohammady, Somayeh and Mohd Sidek, Roslina and Varahram, Pooria and Hamidon, Mohd Nizar and Sulaiman, Nasri (2013) A low complexity selected mapping scheme for peak to average power ratio reduction with digital predistortion in OFDM systems. International Journal of Communication Systems, 26 (4). pp. 481-494. ISSN 1074-5351

Mohd, Ayaz and Wan Ab. Karim Ghani, Wan Azlina and Resitanim, Nur Zalikha and Sanyang, Muhammed Lamin (2013) A review: carbon dioxide capture: biomass-derived-biochar and its applications. Journal of Dispersion Science and Technology, 34 (7). pp. 974-984. ISSN 0193-2691; ESSN: 1532-2351

Mohd Ali, Borhanuddin and Ismail, Alyani and Noordin, Nor Kamariah and Ben-Mubarak, Mohammed A. and Ng , Ben Chee Kyun (2013) Fuzzy Logic Based Self-Adaptive Handover Algorithm for MobileWiMAX. Wireless Personal Communications, 71 (2). pp. 1421-1442. ISSN 0929-6212

Mohd Esa, Norhaizan and Hosseini, Soraya and Gangadaran, Surendiran and Lee, Sin Tien and Kapourchali, Fatemeh Ramezani and Moghadasian, Mohammed H. (2013) Palm oil: features and applications. Lipid Technology, 25 (2). pp. 39-42. ISSN 0956-666X; ESSN: 1863-5377

Mohd Husin, Ezrin and Wayayok, Aimrun and Mohd Soom, Mohd Amin and Bejo, Siti Khairunniza (2013) Development of on-the-go soil nitrogen mapping system for site specific management. Journal of the Institution of Engineers, Malaysia, 74 (1). pp. 14-20. ISSN 0126-513X

Mohd Jaih, Abdul Afiq and Abdul Rahman, Russly and Che Man, Yaakob and Al-Kahtani, Hassan A. and Tengku Mansor, Tengku Salwani (2013) Date seed and date seed oil. International Food Research Journal, 20 (5). pp. 2035-2043. ISSN 1985-4668; ESSN: 1505-5337

Mohd Jakarni, Fauzan and Md. Yusoff, Nur Izzi and Nguyen, Viet Hung and Hainin, Mohd Rosli and Airey, Gordon D. (2013) Modelling the Rheological Properties of Bituminous Binders Using Mathematical Equations. Construction and Building Materials, 40. pp. 174-188. ISSN 0950-0618

Mohd Jusoh, Yanti Maslina and Chin, Nyuk Ling and Yusof, Yus Aniza and Abdul Rahman, Russly (2013) Impact of humidified baking on crust and crumb properties of open bread during storage. Food Science and Technology Research, 19 (1). pp. 29-37. ISSN 1344-6606; ESSN: 1881-3984

Mohd Radzi, Mohd Amran and Azadian, Farshad (2013) A general approach toward building integrated photovoltaic systems and its implementation barriers: A review. Renewable and Sustainable Energy Reviews, 22 (6). pp. 527-538. ISSN 1364-0321

Mohd Radzi, Mohd Amran and Marhaban, Mohammad Hamiruce and Hizam, Hashim and Taghvaee, Mohammad Hossein and Moosavain, S. M. (2013) A current and future study on non-isolated DC`DCconverters for photovoltaic applications. Renewable and Sustainable Energy Reviews, 17 (January). pp. 216-227. ISSN 1364-0321

Mohd Rosli, Mohd Uzair and Mohd Ariffin, Mohd Khairol Anuar and Salit, Mohd Sapuan and Sulaiman, Shamsuddin (2013) Integrated AHP-TRIZ innovation method for automotive door panel design. International Journal of Engineering and Technology, 5 (3). pp. 3158-3167. ISSN 0975-4024; ESSN: 2319-8613

Mohd Rosli, Mohd Uzair and Mohd Ariffin, Mohd Khairol Anuar and Salit, Mohd Sapuan and Sulaiman, Shamsuddin (2013) Integrating TRIZ and AHP: a MPV's utility compartment improvement design concepts. International Journal of Materials, Mechanics and Manufacturing, 1 (1). pp. 32-35. ISSN 1793-8198

Mohd Shafri, Helmi Zulhaidi and Ebadi, Ladan and Mansor, Shattri and Ashurov, Ravshan (2013) A review of applying second-generation wavelets for noise removal from remote sensing data. Environmental Earth Sciences, 70 (6). pp. 2679-2690. ISSN 1866-6280

Mohd Shafri, Helmi Zulhaidi and Idress , Mohammed and Saeidi, Vahideh (2013) Assessing Accuracy of the Vertical Component of Airborne Laser Scanner for 3D Urban Infrastructural Mapping. International Journal of Geoinformatics, 9 (3). pp. 21-30. ISSN 1686-6576

Mohd Shafri, Helmi Zulhaidi and Mohamed Shariff, Abd Rashid and Mansor, Shattri and Ashurov, Ravshan (2013) Hyperspectral discrimination of tree species with different classifications using single- and multiple-endmember. International Journal of Applied Earth Observation and Geoinformation, 23 (August). pp. 177-191. ISSN 0303-2434

Mohd Shafri, Helmi Zulhaidi and Roslan, Siti Nur Aliaa (2013) Automated Red-Edge Information Feature (ARIF) Program For Vegetation Stress Analysis And Classification. Global Journal of Medicinal Plant Research, 1 (2). pp. 184-189. ISSN 2074-0883

Mohd Soom, Mohd Amin and Wayayok, Aimrun and Abdul Rahim, Anuar and Saberioon, Mohammadmehdi and Gholizadeh, Asa (2013) Multi-Spectral Images Tetracam agriculture Digital Camera to Estimate Nitrogen and Grain Yield of Rice at difference Growth Stages. The Philippine agriculturist, 96 (1). pp. 108-112. ISSN 0031-7454

Mohd Yusuff, Rosnah and Ismail, Napsiah and Jassbi, Javad and Ismail, Md. Yusof and Beik Zadeh, Mohammad Reza (2013) Assessment Approaches in Business Excellence Models: A Review and Evaluation. Technics Technologies Education Management, 8 (1). pp. 674-682. ISSN 1840-1503

Mohd Yusuff, Rosnah and Rahimi, Iman and Behmanesh, Reza (2013) A Hybrid Method for Prediction and Assessment Efficiency of Decision Making Units: Real Case Study: Iranian Poultry Farms. International Journal of Decision Support System Technology, 5 (1). pp. 66-83. ISSN 1941-6296

Mohd Yusuff, Rosnah and Shahmohammadi, M. Sadegh and Houshyar, A. Noori (2013) Calculating the Cost of Co2e Emitted to Generate the Required Electricity: Case Study of Lecture Rooms in the Faculty of Engineering- Universiti Putra Malaysia. Journal of Applied Environmental and Biological Sciences, 3 (4). 13-Aug. ISSN 2090-4215

Mohd Zulkifli, Nurin Wahidah and Kalam, Md. Abul and Hassan, Masjuki and Ahmmad, Md Shahabuddin and Yunus, Robiah (2013) Wear prevention characteristics of a palm oil-based TMP (trimethylolpropane) ester as an engine lubricant. Energy, 54. pp. 167-173. ISSN 0360-5442; ESSN: 1873-6785

Mohktar, Mas Sahidayana and Ibrahim, Fatimah and Mohd Rozi, Nur Farahana and Mohd Yusof, Juhaida and Ahmad, Siti Anom and Khong, Su Yen and Omar, Siti Zawiah (2013) A quantitative approach to measure women's sexual function using electromyography: preliminary study on Kegel exercise. Medical Science Monitor, 19. pp. 1159-1166. ISSN 1234-1010; ESSN: 1643-3750

Molamohamadi, Zohreh and Ismail, Napsiah and Leman, Zulkiflle and Zulkifli, Norzima (2013) Supplier selection in a sustainable supply chain. Journal of Advanced Management Science, 1 (3). pp. 278-281. ISSN 2168-0787

Moradipour, Parviz and Noorzaei, Jamaloddin and Jaafar, Mohd Saleh and Abdul Aziz, Farah Nora Aznieta (2013) An improved computational method in structural dynamics. Journal of Engineering, Design and Technology, 11 (3). pp. 288-315. ISSN 1726-0531; ESSN: 1758-8901

Mortezaei, Navid and Zulkifli, Norzima (2013) Integration of lot sizing and flow shop scheduling with lot streaming. Journal of Applied Mathematics, 2013. art. no. 216595. pp. 1-9. ISSN 1110-757X; ESSN: 1687-0042

Mortezaei, Navid and Zulkifli, Norzima and Tang, Sai Hong and Mohd Yusuff, Rosnah (2013) Multi-objective aggregate production planning model with fuzzy parameters and its solving methods. Life Science Journal, 10 (4). pp. 2406-2414. ISSN 1097-8135; ESSN: 2372-613X

Muhammad, and Khan, Moonis Ali and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw (2013) β-carotene adsorption onto mesoporous carbon-coated monolith column: dynamic studies. Chemical Engineering Communications, 200 (10). pp. 1322-1333. ISSN 0098-6445; ESSN: 1563-5201

Muhammad, Bande Yahaya and Adam, Nor Mariah and Othman, Jamarei and Yahya, Azmi and Bashar, Zubairu Usman (2013) Egusi melon (Citrullus lanatus) crop – Malaysian new oil/energy source: production, processing and prospects. Australian Journal of Crop Science, 7 (13). pp. 2101-2107. ISSN 1835-2693; ESSN: 1835-2707

Muhammad Nasir, Ismail and Mohd Ghazi, Tinia Idaty and Omar, Rozita and Idris, Azni (2013) Batch and semi-continuous biogas production from cattle manure. International Journal of Engineering and Technology, 10 (1). 16 - 21. ISSN 1823-1039

Muhammad Sani, Ismaila and Ismail, Maznah and Mahmud, Rozi and Esmaile, Maher Faik and Abu Bakar @ Zakaria, Md Zuki (2013) Bone mass density estimation: Archimede's principle versus automatic X-ray histogram and edge detection technique in ovariectomized rats treated with germinated brown rice bioactives. Clinical Interventions in Aging, 8. pp. 1421-1431. ISSN 1176-9092; ESSN: 1178-1998

Muniandy, Ratnasamy and Aburkaba, Eltaher and Mahdi, Lamya M. J. (2013) Effect of mineral filler type and particle size on asphalt-filler mastic and stone mastic asphalt laboratory measured properties. Australian Journal of Basic and Applied Sciences, 7 (11). pp. 475-487. ISSN 1991-8178

Muniandy, Ratnasamy and Aburkaba, Eltaher and Noor Thamer, (2013) Comparison of flexible pavement performance using Kenlayer and Chev PC software program. Australian Journal of Basic and Applied Sciences, 7 (9). pp. 112-119. ISSN 1991-8178

Muniandy, Ratnasamy and Aburkaba, Eltaher Elzarroug (2013) Effect of 20 micron filler particle size and filler type on rheological and performance properties of stone mastic asphalt-filler mastics. Australian Journal of Basic and Applied Sciences, 7 (1). pp. 105-116. ISSN 1991-8178

Muniandy, Ratnasamy and Aburkaba, Eltaher Elzarroug and Taha, R. (2013) Effect of mineral filler type and particle size on the engineering properties of stone mastic asphalt pavements. The Journal of Engineering Research, 10 (2). pp. 13-32. ISSN 1726-6009; ESSN: 1726-6742

Muniandy, Ratnasamy and Mahdi, Lamya M. J. and Yunus, Robiah and Hasham, Salihudin and Aburkaba, Eltaher (2013) Influence of clay nanoparticles on the physical and rheological characteristics of short term aged asphalt binder. Australian Journal of Basic and Applied Sciences, 7 (11). pp. 488-498. ISSN 1991-8178

Muniandy, Ratnasamy and Mahdi, Lamya M. J. and Yunus, Robiah and Hasham, Salihudin and Aburkaba, Eltaher Elzarroug (2013) Effect of organic montmorillonite nanoclay concentration on the physical and rheological properties of asphalt binder. Australian Journal of Basic and Applied Sciences, 7 (9). pp. 429-437. ISSN 1991-8178

Mustafa, Mohd Amrallah and Seo, Min Woong and Kawahito, Shoji and Yasutomi, Keita and Kagawa, Kiichiro (2013) RTS noise reduction of CMOS image sensors using amplifier-selection pixels. IEICE Electronics Express, 10 (15). pp. 1-7. ISSN 1349-2543

Mustapa Kamal, Siti Mazlina and Abdullah, Norhafizah and Mohamad, Nurul Lina and Ismail, Iryane (2013) Evaluation of Fermentation Conditions by Candidatropicalis for Xylitol Production from Sago Trunk Cortex. Bioresources, 8 (2). pp. 2499-2509. ISSN 1930-2126

Mustapha, Mazli and Othman, E. Abu and Norsal, K. and Mustapha, Faizal and Mamat, Othman and Ramesh, Singh (2013) Carbothermal nitridation process of mechanically milled silica sand using Taguchi's method. Ceramics International, 39 (6). pp. 6119-6130. ISSN 0272-8842; ESSN: 1873-3956

Mustapha, Sa'ari (2013) Using geographic information systems in and constructions of LPG installation: case 1 assessment effects of fire on humans. International Journal of Engineering Research and Technology, 6 (1). pp. 129-143. ISSN 0974-3154

Muthu, Nalienaa and Abdul Aziz, Faieza and Mohd Yusuff, Rosnah (2013) Minimization of spent acid waste from galvanizing plant in Malaysia. Global Journal of Researches in Engineering-E: Civil and Structural Engineering, 13 (6). pp. 15-24. ISSN 0975-5861; ESSN: 2249-4596

Mwinyi, Amir Kombo and Syed Mohamed, Syed Abdul Rahman Al-Haddad and Abdullah, Rusli and Hashim, Shaiful Jahari (2013) Adaptive design model on heterogeneous Learning Management System (LMS) by utilizing Multi-Agent System (MAS). International Journal of Computer Science and Electronics Engineering, 1 (2). pp. 274-277. ISSN 2320 –401X; ESSN: 2320-4028

Nahazanan, Haslinda and Kim Huat, Bujang and Md Yusoff, Zainuddin and Clarke, Sam (2013) Effect of Inundation on Shear Strength Characteristics of Mudstone Backfill. Engineering Geology, 158. pp. 48-56. ISSN 0013-7952

Najafabadi, Mohammad Izadi and Abdul Aziz, Nuraini and Adam, Nor Mariah and Leman, Abdul Mutalib (2013) Effects of intake temperature and equivalence ratio on HCCI ignition timing and emissions of a 2-stroke engine. Applied Mechanics and Materials, 315. pp. 498-502. ISSN 1660-9336; ESSN: 1662-7482

Naserkhaki, Sadegh and El-Rich, Marwan and Abd Aziz, Farah Nora Aznieta and Pourmohammad, Hassan (2013) Separation gap, a critical factor in earthquake induced pounding between adjacent buildings. Asian Journal of Civil Engineering (BHRC), 14 (6). pp. 881-898. ISSN 1563-0854

Nazarpour, Forough and Abdullah, Dzulkefly Kuang and Abdullah, Norhafizah and Motedayen, Nazila and Zamiri, Reza (2013) Biological pretreatment of rubberwood with Ceriporiopsis subvermispora for enzymatic hydrolysis and bioethanol production. BioMed Research International, 2013. art. no. 268349. pp. 1-9. ISSN 1110-7243

Nematollahi, Mohammad Ali and Syed Mohamed, Syed Abdul Rahman Al-Haddad (2013) An overview of digital speech watermarking. International Journal of Speech Technology, 16 (4). pp. 471-488. ISSN 1381-2416; ESSN: 1572-8110

Ng, Chee Kyun and Ee, Gee Keng and Noordin, Nor Kamariah and Fam, Jiang Gi (2013) Finger triggered virtual musical instruments. Journal of Convergence, 4 (1). pp. 39-46. ISSN 2093-7741; ESSN: 2093-775X

Ng, Hui Suan and Ooi, Chien Wei and Mokhtar, Mohd Noriznan and Show, Pau Loke and Ariff, Arbakariya and Tan, Joo Shun and Ng, Eng Poh and Ling, Tau Chuan (2013) Extractive bioconversion of cyclodextrins by Bacillus cereus cyclodextrin glycosyltransferase in aqueous two-phase system. Bioresource Technology, 142. pp. 723-726. ISSN 0960-8524; ESSN: 1873-2976

Ng, Sok Choo and Ismail, Napsiah and Ali, Aidy and Sahari, Barkawi and Mohd Yusof, Juraina (2013) Ultrasonic NDE for internal defect detection in multi-layered composite materials by multi-resolution signal decomposition. Journal of Applied Sciences, 13 (1). pp. 87-94. ISSN 1812-5654

Ng, Wei Lun and Ng, Chee Kyun and Mohd Ali, Borhanuddin and Noordin, Nor Kamariah (2013) Performance evaluation of wireless controller area network (WCAN) using token frame scheme. Wireless Personal Communications, 72 (4). pp. 1847-1873. ISSN 0929-6212; ESSN: 1572-834X

Nik Daud, Nik Norsyahariati and Anuar, Nur Safrah and Md Yusoff, Zainuddin and Ahsan, Amimul (2013) Assessment of lake sediments properties and contaminations level. Advanced Materials Research, 610-613. pp. 2100-2103. ISSN 1022-6680; ESSN: 1662-8985

Nik Daud, Nik Norsyahariati and Izehar, Nur H. and Yusuf, Badronnisa and Mohamed, Thamer Ahmed and Ahsan, Amimul (2013) Groundwater quality improvement by using aeration and filtration methods. International Scholarly and Scientific Research & Innovation, 7 (6). pp. 403-407. ISSN 2010-376X

Noorvand, Hassan and Abang Ali, Abang Abdullah and Demirboga, Ramazan and Farzadnia, Nima and Noorvand, Hossein (2013) Incorporation of nano TiO2 in black rice husk ash mortars. Construction and Building Materials, 47. pp. 1350-1361. ISSN 0950-0618

Noorvand, Hossein and Abang Ali, Abang Abdullah and Demirboga, Ramazan and Noorvand, Hassan and Farzadnia, Nima (2013) Physical and chemical characteristics of unground palm oil fuel ash cement mortars with nanosilica. Construction and Building Materials, 48. pp. 1104-1113. ISSN 0950-0618

Nouri, Hossein and Tang, Sai Hong (2013) Development of bacteria foraging optimization algorithm for cell formation in cellular manufacturing system considering cell load variations. Journal of Manufacturing Systems, 32 (1). pp. 20-31. ISSN 0278-6125; ESSN: 1878-6642

Nouri, Hossein and Tang, Sai Hong and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Samin, Razali (2013) Metaheuristic techniques on cell formation in cellular manufacturing system. Journal of Automation and Control Engineering, 1 (1). pp. 49-54. ISSN 2301-3702

Nouri, Hossein and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Samin, Razali (2013) Development and tuning of bacteria foraging optimization algorithm on cell formation in cellular manufacturing system. Journal of Automation and Control Engineering, 1 (1). pp. 36-39. ISSN 2301-3702

Omar Baki, Sharudin and Tan, L. S. and Kan, C. S. and Mohamed Kamari, Halimah and Muhammad Noor, Ahmad Shukri and Mahdi, Mohd Adzir (2013) Structural and optical properties of Er3 +-Yb3 + codoped multicomposition TeO2-ZnO-PbO-TiO2-Na2O glass. Journal of Non-Crystalline Solids, 362 (1). pp. 156-161. ISSN 0022-3093; ESSN: 1873-4812

Ooi, T. C. and Yusof, Yus Aniza and Chin, Nyuk Ling and A. Talib, Rosnita and Othman, Siti Hajar and Aziz, M. G. (2013) Changes in friction, surface roughness, and tensile strength upon compaction of Ficus deltoidea powder. ScienceAsia, 39 (5). pp. 520-526. ISSN 1513-1874

Othman, Siti Hajar and Abdul Rashid, Suraya and Abdullah, Norhafizah and Mohd Ghazi, Tinia Idaty (2013) 3D CFD Simulations of MOCVD Synthesis System of Titanium Dioxide Nanoparticles. Journal of Nanomaterials, 2013 (Article ID 123256). 11-Jan. ISSN 1687-4110

Othman, Siti Hajar and Abdul Rashid, Suraya and Abdullah, Norhafizah and Mohd Ghazi, Tinia Idaty (2013) TiO2 Nanoparticles Prepared by MOCVD: Effect of Temperature, Flowrate, and Precursor. Asia-Pacific Journal of Chemical Engineering, 8 (1). pp. 32-44. ISSN 1932-2135

P. Mohammed, Mohd Afandi and Charalambides, Maria N. and Tarleton, Edmund and James Gordon, Williams (2013) Mechanical characterization and micromechanical modeling of bread dough. Journal of Rheology, 57 (1). pp. 249-272. ISSN 0148-6055

Parvez Iqbal, A. K. M. and Aris, Ishak and Misron, Norhisam (2013) Design and development of a slot-less permanent magnet linear motor using permeance analysis method for spray application. International Journal of Applied Electromagnetics and Mechanics, 43 (4). 365 - 378. ISSN 1383-5416; ESSN: 1875-8800

Parvez Iqbal, A. K. M. and Aris, Ishak and Rahman, Md Mujibur and Misron, Norhisam (2013) Design and optimization of the housing of spray unit of a linear motor operated spray gun. Indian Journal of Science and Technology, 6 (8). pp. 5167-5174. ISSN 0974-6846; ESSN: 0974-5645

Perumal, Thinagaran and Sulaiman, Md. Nasir and Sharif, Khaironi Yatim and Ramli, Abdul Rahman and Chui, Yew Leong (2013) Development of an embedded smart home management scheme. International Journal of Smart Home, 7 (2). pp. 15-26. ISSN 1975-4094

Pourghasemi, Hamid Reza and Jirandeh, Abbas Goli and Pradhan, Biswajeet and Xu, Chong and Gokceoglu, Candan (2013) Landslide susceptibility mapping using support vector machine and GIS at the Golestan province, Iran. Journal of Earth System Science, 122 (2). pp. 349-369. ISSN 0253-4126; ESSN: 0973-774X

Pourzolfaghar, Zohreh and Ibrahim, Rahinah and Abdullah, Rusli and Adam, Nor Mariah and Abang Ali, Abang Abdullah (2013) Improving dynamic knowledge movements with a knowledge movements with a knowledge-based framework during conceptual design of a green building project. International Journal of Knowledge Management, 9 (2). pp. 62-79. ISSN 1548-0666; ESSN: 1548-0658

Pradhan, Biswajeet (2013) A comparative study on the predictive ability of the decision tree, support vector machine and neuro-fuzzy models in landslide susceptibility mapping using GIS. Computers & Geosciences, 51. 350-365 . ISSN 0098-3004

Pradhan, Biswajeet and Al Rawashdeh, Samih and Ruzouq, Rami and Al-Fugara, A`kif and Abu-Hamatteh, Ziad Salem H and Ghayda, Abu Rumman (2013) Monitoring of Dead Sea water surface variation using multi-temporal satellite data and GIS. Arabian Journal of Geosciences, 6 (2013). pp. 3241-3248. ISSN 1866-7511

Pradhan, Biswajeet and Billa, Lawal (2013) GIS modeling for selection of a transfer station site for residential solid waste separation and recycling. Pertanika Journal of Science & Technology, 21 (1). pp. 477-488. ISSN 0128-7680; ESSN: 2231-8526

Pradhan, Biswajeet and Biro, Khalid and Sulieman, Hussein and Buchroithner, Manfred (2013) Exploitation of TerraSAR-X Data for Land use/Land Cover Analysis Using Object-Oriented Classification Approach in the African Sahel Area, Sudan. Journal of the Indian Society of Remote Sensing, 41 (3). pp. 539-553. ISSN 0255-660X

Pradhan, Biswajeet and Che Dom, Nazri and Ahmad, Abu Hassan and Abd Latif, Zulkiflee and Ismail, Rodziah (2013) Coupling of remote sensing data and environmental-related parameters for dengue transmission risk assessment in Subang Jaya, Malaysia. Geocarto International, 28 (3). pp. 258-272. ISSN 1010-6049

Pradhan, Biswajeet and Devkota, Krishna Chandra and Regmi, Amar Deep and Pourghasemi, Hamid Reza and Kohki, Yoshida and In Chang, Ryu and Dhital, Megh Raj and Althuwaynee, Omar F. (2013) Landslide susceptibility mapping using certainty factor, index of entropy and logistic regression models in GIS and their comparison at Mugling-Narayanghat road section in Nepal Himalaya. Natural Hazards, 65 (1). 135-165 . ISSN 0921-030X

Pradhan, Biswajeet and Kabiri, Keivan and Samimi-Namin, Kaveh and Moradib, Masoud (2013) Detecting coral bleaching, using QuickBird multi-temporal data: A feasibility study at Kish Island, the Persian Gulf. Estuarine Coastal and Shelf Science , 117. 273-281 . ISSN 0272-7714

Pradhan, Biswajeet and Mansor, Shattri and Abdul-Hadi, Alaa and Tan, C. K. (2013) Seasonal variability of chlorophyll-a and oceanographic conditions in Sabah waters in relation to Asian monsoon`a remote sensing study. Environmental Monitoring and Assessment, 185 (2013). 3977`3991. ISSN 0167-6369

Pradhan, Biswajeet and Mansor, Shattri and Al-shalabi, Mohamed and Althuwaynee, Omar F. and Billa, Lawal (2013) Manifestation of Remote Sensing Data in Modeling Urban Sprawl Using the SLEUTH Model and Brute Force Calibration: A Case Study of Sana`a City, Yemen. Journal of the Indian Society of Remote Sensing, 41 (2). pp. 405-416. ISSN 0255-660X

Pradhan, Biswajeet and Mansor, Shattri and Al-shalabi, Mohamed and Billa, Lawal and A. A. Al-Sharif, Abubakr (2013) Modelling urban growth evolution and land-use changes using GIS based cellular automata and SLEUTH models: the case of Sana'a metropolitan city, Yemen. Environmental Earth Sciences, 70 (1). pp. 425-437. ISSN 1866-6280

Pradhan, Biswajeet and Mohammad Zare, and Pourghasemi, Hamid Reza and Vafakhah, Mahdi (2013) Landslide susceptibility mapping at VAZ watershed (Iran) using an artificial neural network model: a comparison between multilayer perceptron (MLP) and radial basic function (RBF) algorithms. Arabian Journal of Geosciences, 6 (8). pp. 2873-2888. ISSN 1866-7511

Pradhan, Biswajeet and Mohd Shafri, Helmi Zulhaidi and Mansor, Shattri and Al-sharif, Abubakr A. A. (2013) Spatio-temporal Analysis of Urban and Population Growths in Tripoli using Remotely Sensed Data and GIS. Indian Journal of Science and Technology, 6 (8). pp. 5134-5142. ISSN 0974-6846

Pradhan, Biswajeet and Mohd Shafri, Helmi Zulhaidi and Mansor, Shattri and Kabiri, Keivan and Samim-Namin, Kaveh (2013) A Novel Approach to Estimate Diffuse Attenuation Coefficients for QuickBird Satellite Images: A Case Study at Kish Island, the Persian Gulf. Journal of the Indian Society of Remote Sensing, 41 (4). pp. 797-806. ISSN 0255-660X

Pradhan, Biswajeet and Pourghasemi, Hamid Reza and Gokceoglu, Candan and Mohammadi, Majid and Moradi, Hamid Reza (2013) Application of weights-of-evidence and certainty factor models and their comparison in landslide susceptibility mapping at Haraz watershed, Iran. Arabian Journal of Geosciences, 6 (7). pp. 2351-2365. ISSN 1866-7511

Pradhan, Biswajeet and Ramli, Mohammad Firuz and Pirasteh, Saied and Safari, Hojjat Ollah (2013) Coupling of DEM and remote-sensing-based approaches for semi-automated detection of regional geostructural features in Zagros mountain, Iran. Arabian Journal of Geosciences, 6 (2013). pp. 91-99. ISSN 1866-7511

Pradhan, Biswajeet and Ramli, Mohammad Firuz and Sulaiman, Wan Nor Azmin and Abd Manap, Mohamad and Surip, Noraini (2013) A knowledge-driven GIS modeling technique for groundwater potential mapping at the Upper Langat Basin, Malaysia. Arabian Journal of Geosciences, 6 (May-13). 1621`1637. ISSN 1866-7511

Pradhan, Biswajeet and Regmi, Amar Deep and Kohki, Yoshida and Hidehisa, Nagata and Pradhan, Ananta Man Singh and Pourghasemi, Hamid Reza (2013) The relationship between geology and rock weathering on the rock instability along Mugling-Narayanghat road corridor, Central Nepal Himalaya. Natural Hazards, 66 (2013). pp. 501-532. ISSN 0921-030X

Pradhan, Biswajeet and Safari, Hojjat Ollah and Pirasteh, Saeid and Amid, Hossein (2013) Geohazards analysis of Pisa tunnel in a fractured incompetent rocks in Zagros Mountains, Iran. Arabian Journal of Geosciences, 6 (4). pp. 1101-1112. ISSN 1866-7511

Pradhan, Biswajeet and Sezer, Ebru Akcapinar and Gokceoglu, Candan (2013) Erratum to: `Manifestation of an adaptive neuro-fuzzy model on landslide susceptibility mapping: Klang valley, Malaysia` [Expert Systems with Applications 38 (2011) 8208`8219]. Expert Systems with Applications, 40 (6). p. 2360. ISSN 0957-4174

Pradhan, Biswajeet and Tehrany, Mahyat Shafapour and Jebur, Mustafa Neamah (2013) Remote Sensing Data Reveals Eco-Environmental Changes in Urban Areas of Klang Valley, Malaysia: Contribution from Object Based Analysis. Journal of the Indian Society of Remote Sensing, 41 (4). pp. 981-991. ISSN 0255-660X

Pradhan, Biswajeet and Tehrany, Mahyat Shafapour and Jebur, Mustafa Neamah (2013) Spatial prediction of flood susceptible areas using rule based decision tree (DT) and ensemble bivariate and multivariate statistical models in GIS. Journal of Hydrology, 504 (2013). pp. 69-79. ISSN 0022-1694

Pradhan, Biswajeet and Tien Bui, Dieu and Lofman, Owe and Revhaug, Inge and Dick , Øystein B. (2013) Regional prediction of landslide hazard using probability analysis of intense rainfall in the Hoa Binh province, Vietnam. Natural Hazards, 66 (2). 707-730 . ISSN 0921-030X

Pua, Fei Ling and Salit, Mohd Sapuan and Zainudin, Edi Syams and Adib, M. Z. (2013) Effect of fibre surface modification on properties of kenaf/poly(vinyl alcohol) composite film. Journal of Biobased Materials and Bioenergy, 7 (1). pp. 95-101. ISSN 1556-6579; ESSN: 1556-6579

Putra, Azma and Y. Abd, Mothanna and Abdul Jalil, Nawal Aswan and Susilo, Sidik (2013) Modeling of dynamic response of beam-type vibration absorbing system excited by moving mass. International Review of Mechanical Engineering, 7 (5). pp. 813-820. ISSN 1970-8734

Quek, Meei Chien and Chin, Nyuk Ling and Yusof, Yus Aniza (2013) Modelling of rheological behaviour of soursop juice concentrates using shear rate-temperature-concentration superposition. Journal of Food Engineering, 118 (4). pp. 380-386. ISSN 0260-8774; ESSN: 1873-5770

Rahman, Ataur and Yahya, Azmi (2013) Performance investigation of an advanced tracked prime mover on the low bearing soil. Journal of Terramechanics, 50 (4). pp. 233-244. ISSN 0022-4898

Rahman, Ayesha S. and Rahman, Ataur and Zaman, Mohammad A. and Haddad, Khaled and Ahsan, Amimul and Imteaz, Monzur Alam (2013) A study on selection of probability distributions for at-site flood frequency analysis in Australia. Natural Hazards, 69 (3). pp. 1803-1813. ISSN 0921-030X; ESSN: 1573-0840

Rahman, Md Mustafizur and Saidur, Rahman and Mekhilef, Saad and Uddin, M. Borhan and Ahsan, Amimul (2013) Double-diffusive buoyancy induced flow in a triangular cavity with corrugated bottom wall: effects of geometrical parameters. International Communications in Heat and Mass Transfer, 45. pp. 64-74. ISSN 0735-1933; ESSN: 1879-0178

Rahman, Md. Mahmudur and Bari, Quazi Hamidul and Mohammad, Noor and Ahsan, Amimul and Sobuz, Habibur Rahman and Uddin, Md. Alhaz (2013) Characterization of rice husk carbon produced through simple technology. Advances in Materials Science and Applications, 2 (1). pp. 25-30. ISSN 2306-9325; ESSN: 2306-9317

Rahmanian, Saeed and Abdul Rashid, Suraya and Zahari, Rizal and Zainudin, Edi Syams (2013) Synthesis of vertically aligned carbon nanotubes on carbon fiber. Applied Surface Science, 271. pp. 424-428. ISSN 0169-4332; ESSN: 1873-5584

Ramadhan, A. A. and Abu Talib, Abd. Rahim and Mohd Rafie, Azmin Shakrine and Zahari, Rizal (2013) High velocity impact response of Kevlar-29/epoxy and 6061-T6 aluminum laminated panels. Materials & Design, 43. pp. 307-321. ISSN 0261-3069

Rameli, Nabilah and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Gomes, Chandima and Jasni, Jasronita (2013) Evaluation of lightning induced voltage due to the effect of design parameters on medium voltage distribution line. Jurnal Teknologi, 64 (4). pp. 151-155. ISSN 0127–9696; ESSN: 2180–3722

Raminfar, Reza and Zulkifli, Norzima and Vasili, Mohammadreza (2013) A mathematical programming model for cell formation problem with machine replication. Journal of Applied Mathematics, 2013. art. no. 285759. pp. 1-9. ISSN 1110-757X; ESSN: 1687-0042

Raminfar, Reza and Zulkifli, Norzima and Vasili, Mohammadreza and Tang, Sai Hong (2013) An integrated model for production planning and cell formation in cellular manufacturing systems. Journal of Applied Mathematics, 2013. art. no. 487694. pp. 1-10. ISSN 1110-757X; ESSN: 1687-0042

Randjbaran, Elias and Zahari, Rizal and Majid, Dayang Laila and Abdul Jalil, Nawal Aswan and Vaghei, Ramin and Ahmadi, Ramin (2013) The effects of stacking sequence layers of hybrid composite materials in energy absorption under the high velocity ballistic impact conditions: an experimental investigation. Journal of Material Sciences & Engineering, 2 (4). pp. 1-8. ISSN 2169-0022

Rashid, Umer and Ibrahim, Muhammad and Yasin, Shahid and Yunus, Robiah and Yap, Taufiq Yun Hin and Knothe, Gerhard (2013) Biodiesel from Citrus reticulata (mandarin orange) seed oil, a potential non-food feedstock. Industrial Crops and Products, 45. pp. 355-359. ISSN 0926-6690; ESSN: 1872-633X

Razali, Mohd Hudzari and Wayayok, Aimrun and Ssomad, M.A.H.A. and M.S., Norazean (2013) Application of geographical information system for farm mechanization education and training. Scientific Journal of Pure and Applied Sciences, 2 (4). pp. 196-203. ISSN 2322-2956

Rezaee Jordehi, Ahmad Rezaee and Jasni, Jasronita (2013) Parameter selection in particle swarm optimisation: a survey. Journal of Experimental and Theoretical Artificial Intelligence, 25 (4). pp. 527-542. ISSN 0952-813X; ESSN: 1362-3079

Romli, Fairuz Izzudin (2013) Baseline Selection in Redesign Process. Frontiers in Aerospace Engineering, 2 (2). pp. 116-128. ISSN 2325-6788

Romli, Fairuz Izzudin (2013) Functional Analysis for Conceptual Aircraft Design. Journal of Advanced Management Science, 1 (4). pp. 349-353. ISSN 2315-4462

Romli, Fairuz Izzudin and Kamaruddin, Mohd Syahidie (2013) Preliminary Study of Emissions Regulation Effects on Future Commercial Aircraft Designs. International Journal of Environmental Science and Development, 4 (2). pp. 187-190. ISSN 2010-0264

Romli, Fairuz Izzudin and Mohamad Noor, Ahmad Redzman (2013) Conceptual Design of Vertical Passenger Seat for Standing Cabin in Commercial Transport Aircraft. Journal of Advanced Management Science, 1 (4). pp. 344-348. ISSN 2315-4462

Roslan, Syazili and Razali, Mohd. Hudzari and Mustafa, Kamarul Ain and Wan Ismail, Wan Ishak and Abbas, Zulkifly and Zainuddin, Mohamad Faiz (2013) Rapid detection techniques for mechanical properties Determination on surface of dioscorea hispida rhizome. Procedia Engineering, 68. pp. 446-452. ISSN 1877-7058

Saberioon, Mohammad Mehdi and Mohd Soom, Mohd Amin and Wayayok, Aimrun and Gholizadeh, Asa and Abdul Rahim, Anuar (2013) Assessment of colour indices derived from conventional digital camera for determining nitrogen status in rice plants. Journal of Food, Agriculture and Environment, 11 (2). pp. 655-662. ISSN 1459-0255; ESSN: 1459-0263

Sabo, Aliyu and Abdul Wahab, Noor Izzri and Usman, Hamisu and Mohd Radzi, Mohd Amran and Mailah, Nashiren Farzilah (2013) Comparative study between fuzzy logic and artificial neural network (ANN) algorithms for single phase shunt active power filters (SAPFs). Jokull Journal, 63 (11). pp. 377-387. ISSN 0449-0576

Sadrolhosseini, Amir Reza and Muhammad Noor, Ahmad Shukri and Abd. Moksin, Mohd Maarof and Abdi, Mahnaz M. and Mohammadi, Ahmad (2013) Application of polypyrrole-chitosan layer for detection of Zn (II) and Ni (II) in aqueous solutions using surface plasmon resonance. International Journal of Polymeric Materials and Polymeric Biomaterials, 62 (5). pp. 284-287. ISSN 0091-4037; ESSN: 1563-535X

Sadrolhosseini, Amir Reza and Muhammad Noor, Ahmad Shukri and Shameli, Kamyar and Mamdoohi, Ghazaleh and Abd. Moksin, Mohd Maarof and Mahdi, Mohd Adzir (2013) Laser ablation synthesis and optical properties of copper nanoparticles. Journal of Materials Research, 28 (18). pp. 2629-2636. ISSN 0884-2914; ESSN:2044-5326

Saghravani, Seyed Reza and Yusoff, Ismail and Mustapha, Sa'ari and Saghravani, Seyed Fazlollah (2013) Estimating groundwater recharge using empirical method: a case study in tropical zone. Sains Malaysiana, 42 (5). pp. 553-560. ISSN 0126-6039

Sahbudin, Ratna Kalos Zakiah and Kamarulzaman, Mazlin and Hitam, Salasiah and Mokhtar, Makhfudzah and Ahmad Anas, Siti Barirah (2013) Performance of SAC OCDMA-FSO communication systems. Optik, 124 (17). pp. 2868-2870. ISSN 0030-4026; ESSN: 1618-1336

Sai'd, Yunusa Ali and Ramli, Abdul Rahman and Ahmad, Siti Anom and Toudeshki, Arash and Moshayedi, Ata Jahangir (2013) A new mathematical model for mapping indoor environment. International Journal of Advancements in Mechanical and Aeronautical Engineering, 1 (1). pp. 36-39. ISSN 2372-4153

Sajedi, Mohammad Askari and Mohd Yusuff, Rosnah and Angiz L., Majid Zerafat and Mustafa, Adli and Zulkifli, Norzima and Ismail, Md. Yusof and Gholamzadeh, Mahdi and Mojahed, Majid (2013) An enhanced EFQM methodology for evaluating the performance of organization. Life Science Journal, 10 (1). pp. 2934-2941. ISSN 1097-8135; ESSN: 2372-613X

Sajedi, Mohammad Askari and Mohd Yusuff, Rosnah and Angiz L., Majid Zerafat and Zulkifli, Norzima and Ismail, Md. Yusof and Gholamzadeh, Mahdi and Mojahed, Majid (2013) An improved TOPSIS/EFQM methodology for evaluating the performance of organizations. Life Science Journal, 10 (1). pp. 4315-4322. ISSN 1097-8135; ESSN: 2372-613X

Salih, Ahmad Abbas Al-Ameen and Jumaah, Fawaz Mohammed and Md Zhahir, Md Amzari and Gomes, Chandima (2013) The development of GPS navigation systems in civil aircraft. Applied Mechanics and Materials, 390. pp. 512-517. ISSN 1660-9336; ESSN: 1662-7482

Salih, Ahmad Abbas Al-Ameen and Md Zhahir, Md Amzari (2013) Design of a high accurate aircraft ground - based landing systems. International Journal of Engineering Trends and Technology, 4 (3). pp. 415-429. ISSN 2349-0918; ESSN: 2231-5381

Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Abral, Hairul and Putra, Hendri (2013) Effect of Alkalization on Mechanical Propertiesof Water Hyacinth Fibers-Unsaturated Polyester composites. Polymer-Plastics Technology and Engineering, 52 (5). pp. 446-451. ISSN 0360-2559

Salit, Mohd Sapuan and Lok, H. Y. and Ishak, Mohamad Ridzwan and Misri, Sairizal (2013) Mechanical properties of hybrid glass/sugar palm fibre reinforced unsaturated polyester composites. Chinese Journal of Polymer Science, 31 (10). pp. 1394-1403. ISSN 0256-7679; ESSN: 1439-6203

Salit, Mohd Sapuan and Pua, Fei Ling and El-Shekeil, Yousuf Ali Gumaan and Al-Oqla, Faris M. (2013) Mechanical properties of soil buried kenaf fibre reinforced thermoplastic polyurethane composites. Materials and Design, 50. pp. 467-470. ISSN 0264-1275; ESSN: 1873-4197

Salit, Mohd Sapuan and Razali, Mohd Hudzari and Yahaya, Mohd Rizuwan and Roslan, Syazili and Abd Wahid, Muhamad Azhar (2013) Analytical measurement and instrumentation for agriculture engineering. Research and Reviews in BioSciences, 7 (9). pp. 377-381. ISSN 0974-753

Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdan, Khalina and Sulaiman, Shamsuddin and Md Deros, Mohd Azaman (2013) An investigation of the processability of natural fibre reinforced polymercomposites on shallow and flat thin-walled parts by injection moulding process. Materials and Design, 50 (September). pp. 451-456. ISSN 0261-3069

Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdul Aziz, Nuraini and Mansor, Muhd Ridzuan and Arep @ Ariff, Hambali (2013) Hybrid natural and glass fibers reinforced polymer composites material selection using Analytical Hierarchy Process for automotive brake lever design. Materials and Design, 51. pp. 484-492. ISSN 0261-3069

Salit, Mohd Sapuan and Zainudin, Edi Syams and Japar, Sahari and Maleque, Md Abdul (2013) Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree. Materials and Design, 49. pp. 285-289. ISSN 0264-1275; ESSN: 1873-4197

Salit, Mohd Sapuan and Zainudin, Edi Syams and Japar, Sahari and Maleque, Md Abdul (2013) Thermo-mechanical behaviors of thermoplastic starch derived from sugar palm tree (Arenga pinnata). Carbohydrate Polymers, 92 (2). pp. 1711-1716. ISSN 0144-8617

Samsu Baharuddin, Azhari and Naim, Mohd Nazli and Zakaria, Rabitah and Harun, Nor Amira Farhana and Zainudin, Huzairi and Kamal Bahrin, Ezyana (2013) Cellulase production from treated oil palm empty fruit bunch degradation by locally isolated Thermobifida fusca. BioResources, 8 (1). pp. 676-687. ISSN 1930-2126

Samsu Baharuddin, Azhari and Naim, Mohd Nazli and Zakaria, Rabitah and Nik Mahmud, Nik Anis (2013) Enzyme Saccharification Of Oil Palm Mesocarp Fiber (OPMF) Treated With Superheated Steam. BioResources, 8 (1). pp. 1320-1331. ISSN 1930-2126

Samsu Baharuddin, Azhari and Sulaiman, Alawi and Kim, Dong Hee and Mokhtar, Mohd Noriznan and Hassan, Mohd Ali and Wakisaka, Minato and Shirai, Yoshihito and Nishida, Haruo (2013) Selective component degradation of oil palm empty fruit bunches (OPEFB) using high-pressure steam. Biomass and Bioenergy, 55. pp. 268-275. ISSN 0961-9534; ESSN: 1873-2909

Saripan, M. Iqbal and Hashima, Suhairul and Abdul Rahman, Ahmad Taufek and Yaakob, Nor Haliza and Bradley, David Andrew and Alzimami, Khalid (2013) Effective Atomic Number of Ge-doped and Al-doped Optical Fibres for Radiation Dosimetry Purposes. IEEE Transactions on Nuclear Science, 60 (2). pp. 555-559. ISSN 0018-9499

Saripan, M. Iqbal and Mohd Saad, Wira Hidayat and Hashim, Suhairul and Abdul Rahman, Ahmad Taufek and Wells, Kevin and Bradley, David Andrew (2013) Analysis of photon scattering trends for material classification using artificial neural network models. IEEE Transactions on Nuclear Science, 60 (2). pp. 515-519. ISSN 0018-9499; ESSN: 1558-1578

Seyed Mohammad Hussein, and Ahmad, Siti Anom and Hassan, Mohd Khair and Ishak, Asnor Juraiza (2013) Introducing new statistical shape based and texture feature extraction methods in the plant species recognition system. International Journal of Engineering and Technology, 10 (2). pp. 56-61. ISSN 1823-1039

Seyedzadegan, Mojtaba and Othman, Mohamed and Mohd Ali, Borhanuddin and Subramaniam, Shamala (2013) Zero-degree algorithm for internet GateWay placement in backbone wireless mesh networks. Journal of Network and Computer Applications, 36 (6). pp. 1705-1723. ISSN 1084-8045

Shahbazpanahi, Shahriar and Abang Ali, Abang Abdullah and Abd.Aziz, Farah Nora Aznieta and Kamgar, Alaleh and Farzadnia, Nima (2013) Modelling of the fracture process zone to improve the crack propagation criterion in concrete. Journal of the South African Institution of Civil Engineering, 55 (3). pp. 2-9. ISSN 1021-2019

Shahrazi, Syahinaz and Saallah, Suryani and Mokhtar, Mohd Noriznan and Samsu Baharuddin, Azhari and Md. Yunos, Khairul Faezah (2013) Dynamic mathematical modelling of reaction kinetics for Cyclodextrins production from different starch sources using Bacillus macerans cyclodextrin glucanotransferase. American Journal of Biochemistry and Biotechnology, 9 (2). pp. 195-205. ISSN 1553-3468; ESSN: 1558-6332

Shakerardekani, Ahmad and Karim, Roselina and Mohd Ghazali, Hasanah and Chin, Nyuk Ling (2013) The effect of monoglyceride addition on the rheological properties of pistachio spread. Journal of the American Oil Chemists' Society, 90 (10). pp. 1517-1521. ISSN 0003-021X; ESSN: 1558-9331

Shuib, Solehuddin and Sahari, Barkawi and Wong, Shaw Voon and Arumugam, Manohar and Kadarman, Halim (2013) Stress analysis of femoral hip with bone resorption. Trends in Biomaterials and Artificial Organs, 27 (2). pp. 88-92. ISSN 0971-1198

Sichani, Mohammadmehdi Shahzamanian and Sahari, Barkawi and Bayat, Mehdi and Mustapha, Faizal and Zahari, Nur Ismarrubie (2013) Elastic contact analysis of functionally graded brake disks subjected to thermal and mechanical loads. International Journal for Computational Methods in Engineering Science and Mechanics, 14 (1). pp. 10-23. ISSN 1550-2287; ESSN: 1550-2295

Siow, Chun Lim and Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin (2013) Characterizing of bentonite with chemical, physical and electrical perspectives for improvement of electrical grounding systems. International Journal of Electrochemical Science, 8 (9). pp. 11429-11447. ISSN 1452-3981

Siow, Chun Lim and Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin (2013) Electrical earthing in troubled environment. International Journal of Electrical Power and Energy Systems, 47. pp. 117-128. ISSN 0142-0615; ESSN: 1879-3517

Sobhi, Babak and Mohd Adzahan, Noranizan and Shamsuddin, Rosnah and Abdul Karim, Muhammad Shahrim and Abdul Rahman, Russly and Bakar, Jamilah and Ghazali, Zulkafli (2013) Development of instrumental methods for textural evaluation of chili paste. Kasetsart Journal: Natural Science, 47 (1). pp. 122-131. ISSN 0075-5192

Soltani, Nayereh and Dehzangi, Arash and Saion, Elias and Yeop Majlis, Burhanuddin and Zare, Mohammad Reza and Kharazmi, Alireza and Navasery, Manizheh (2013) Influence of exposure time on structural, optical and electrical properties of zinc sulphide nanoparticles synthesized by microwave technique. Chalcogenide Letters, 10 (1). pp. 27-37. ISSN 1584-8663

Soltani, Nayereh and Saion, Elias and Hussein, Mohd Zobir and Yunus, Robiah and Navasery, Manizheh (2013) Characterization of CdS nanoparticles synthesized using microwave-assisted polyol method. Advanced Materials Research, 667. pp. 122-127. ISSN 1022-6680; ESSN: 1662-8985

Sreenivasan, Subramaniasarma and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Abdan, Khalina (2013) Recent developments of kenaf fibre reinforced thermoset composites: review. Materials Research Innovations, 17 (SUPPL 2). S2-S11. ISSN 1432-8917

Sulaiman, Abdul Hadi and Abu Bakar, Muhammad Hafiz and Abdul Kadir, Muhammad Zamzuri and Hitam, Salasiah and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir (2013) Investigation of multiwavelength performance utilizing an advanced mechanism bidirectional Lyot filter. IEEE Photonics Journal, 5 (6). art. no. 7101008. pp. 1-8. ISSN 1943-0655

Sulaiman, Nasri and Md Yunus, Nurul Amziah and Ahmad, Siti Anom and Mazloomi, Kaveh (2013) Analysis of the Frequency Response of a Water Electrolysis cell. International Journal of Electrochemical Science, 8 (3). pp. 3731-3739. ISSN 1452-3981

Sulaiman, Shamsuddin and Borazjani, Soroosh and Roshan Zamir, Amir Sayah and Heydaryan, Sahar (2013) Failure analysis of aluminum reinforced composite vessel. Applied Mechanics and Materials, 392. pp. 178-182. ISSN 1660-9336; ESSN: 1662-7482

Sulaiman, Shamsuddin and Emamian, Seyed Sattar and Sheikholeslam, Mohammad Nassir and Mehrpouya, Mehrshad (2013) Review of the Effects of Friction Stir Welding Speed on Stainless Steel Type 304L. International Journal of Materials, Mechanics and Manufacturing, 1 (1). pp. 85-87. ISSN 1793-8198

Sulaiman, Shamsuddin and Jolgaf, Mohamed A. Abdulmawlla (2013) Optimum design of metal composites for closed die forging. International Journal of Innovation, Management and Technology, 4 (1). pp. 152-154. ISSN 2010-0248

Sulaiman, Shamsuddin and Mohamed Ariff, Azman Hanim and Baharudin, B. T. Hang Tuah and Nemati, Jamshid and Majzoobi, Gholam Hossein (2013) Effect of equal channel angular extrusion on fatigue life of pure copper. Advanced Materials Research, 685 (2013). pp. 97-101. ISSN 1660-9336

Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Tang, Sai Hong and Mustafa, N. A. (2013) Effect of boric acid mixture as solid lubricant towards machining processes. Advanced Materials Research, 651. pp. 372-377. ISSN 1022-6680; ESSN: 1662-8985

Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Tang, Sai Hong and Salleh, Aslinda (2013) Influence of pattern coating thickness on porosityand mechanical properties of lost foam casting of Al-Si (LM6) alloy. Applied Mechanics and Materials, 300-301. pp. 1281-1284. ISSN 1660-9336; ESSN: 1662-7482

Sulaiman, Shamsuddin and Roshan Zamir, Amir Sayah and Borazjani, Soroosh (2013) Effect of cutting parameters on cutting temperature of TiAL6V4 alloy. Applied Mechanics and Materials, 392. pp. 68-72. ISSN 1660-9336; ESSN: 1662-7482

Sulaiman, Shamsuddin and Roshan Zamir, Amir Sayah and Borazjani, Soroosh (2013) Finite element modeling and simulation of machining of titanium alloy and H13 tool steel using PCBN tool. Applied Mechanics and Materials, 392. pp. 36-40. ISSN 1660-9336; ESSN: 1662-7482

Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Ahmad, Abdul Rahim and Shakil, Asma and Muhamed Balbed, Mustafa Agil and Wan Adnan, Wan Azizun (2013) Personalized offline signature verification using multiple HMM-classifiers and SOM-fuzzy decision fusion. Scottish Journal of Arts, Social Sciences and Scientific Studies, 9 (1). pp. 148-165. ISSN 2047-1278

Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Loo, Yim Ling and Md Anwar, Rina and Ahmad Faudzi, Masyura and Shakil, Asma (2013) Analysis of the effects and relationship of perceived handwritten signature's size, graphical complexity, and legibility with dynamic parameters for forged and genuine samples. Journal of Forensic Sciences, 58 (3). pp. 724-731. ISSN 0022-1198; ESSN: 1556-4029

Taherzadeh, Ebrahim and Mohd Shafri, Helmi Zulhaidi (2013) Development of a generic model for the detection of roof materials based on an object-based approach using WorldView-2 satellite imagery. Advances in Remote Sensing, 2 (4). pp. 312-321. ISSN 2169-267X; ESSN: 2169-2688

Tahir, Yaseen Hasan and Ng, Chee Kyun and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin (2013) Transmission of visual data over wireless fading channel in real-time systems based on superposition coding scheme. Arabian Journal for Science and Engineering, 38 (6). pp. 1459-1469. ISSN 1319-8025; ESSN: 2191-4281

Talei, Daryush and Valdiani, Alireza and Mahmood, Maziah and Mohsenkhah, Mohammad (2013) Germination response of MR 219 rice variety to different exposure times and periods of 2450 MHz microwave frequency. The Scientific World Journal, 2013. art. no. 408026. pp. 1-7. ISSN 2356-6140; ESSN: 1537-744X

Tan, Chee Fai and Kher, Vee Kiat and Ismail, Napsiah (2013) Design of a feature recognition system for CAD/CAM integration. World Applied Sciences Journal, 21 (8). pp. 1162-1166. ISSN 1818-4952; ESSN: 1991-6426

Tan, Gim Heng and Mohd Sidek, Roslina and Ramiah, Harikrishnan and Chong, Wei Keat (2013) A high-conversion gain, low-power mixer adapting current reuse technique for ZigBee application. IETE Journal of Research, 59 (2). pp. 128-131. ISSN 0377-2063; ESSN: 0974-780X

Tang, Sai Hong and Ab. Rahman, Nasrul Hakim and Khaksar, Weria and Mohd Ariffin, Mohd Khairol Anuar and Sulaiman, Shamsuddin and Pah, Pin Shang (2013) A hybrid method using analytic hierarchical process and artificial neural network for supplier selection. International Journal of Innovation, Management and Technology, 4 (1). pp. 109-111. ISSN 2010-0248

Tang, Sai Hong and Ang, Chun Kit and Nakhaeinia, Danial and Karasfi, Babak and Motlagh, Omid Reza Esmaeili (2013) A reactive collision avoidance approach for mobile robot in dynamic environments. Journal of Automation and Control Engineering, 1 (1). pp. 16-20. ISSN 2301-3702

Tang, Sai Hong and Boyer, Omid and Pedram, Ali and Mohd Yusuff, Rosnah and Zulkifli, Norzima (2013) A review on multiple criteria undesirable facility location problems. Journal of Basic and Applied Scientific Research, 3 (8). pp. 708-713. ISSN 2090-4304; ESSN: 2090-424X

Tang, Sai Hong and Ghobakhloo, Morteza (2013) IT investments and product development effectiveness: Iranian SBs. Industrial Management & Data Systems, 113 (2). pp. 265-293. ISSN 0263-5577; ESSN: 1758-5783

Tang, Sai Hong and Hamami, Ghazali and Karasfi, Babak and Nakhaeinia, Danial (2013) Unsupervised and online place recognition for mobile robot based on local features description. Journal of Automation and Control Engineering, 1 (1). pp. 60-64. ISSN 2301-3702

Tang, Sai Hong and Kanasen, Nantha Kumar and Motlagh, Omid Reza Esmaeili and Loo, Shing Yan and Khaksar, Weria (2013) An Algorithm for Navigation of Mobile Robots in Cluttered Environments. Advanced Science Letters, 19 (11). pp. 3247-3249. ISSN 1936-6612

Tang, Sai Hong and Khaksar, Mansoor and Esmaeili Motlagh, Omid Reza and Khaksar, Weria (2013) A genetic-based optimized fuzzy-tabu controller for mobile robot randomized navigation in unknown environment. International Journal of Innovative Computing, Information and Control, 9 (5). pp. 2185-2202. ISSN 1349-4198

Tang, Sai Hong and Pah, Pin Shang and Arumugam, Manohar and Mohd Yusuff, Rosnah (2013) Use of simulation in solving outpatient clinic problems: a review of the literature. South African Journal of Industrial Engineering, 24 (3). pp. 27-42. ISSN 1012-277X; ESSN: 2224-7890

Tang, Sai Hong and Sulaiman, Shamsuddin and Samin, Razali and Teo, Hiu Hong and Khaksar, Weria (2013) Development of an Educational Robotic Training Kit. Advanced Science Letters, 19 (11). pp. 3304-3306. ISSN 1936-6612

Tang, Sai Hong and Vasili, Mehdi and Vasili, Mohammadreza and Ismail, Napsiah (2013) Application of fixed order period lot sizing rule in capacitated make-to-order production systems. International Journal of Innovation, Management and Technology, 4 (1). pp. 1-5. ISSN 2010-0248

Tarmidi, Mohammad Zakri and Mohamed Shariff, Abdul Rashid and Mahmud, Ahmad Rodzi and Zaiton Ibrahim, Zelina (2013) The important of information integration in marine management: a review. World Applied Sciences Journal, 22 (6). pp. 870-876. ISSN 1818-4952; ESSN: 1991-6426

Taufik, R. S. and Sulaiman, Samsudin (2013) Thermal expansion model for cast aluminium silicon carbide. Procedia Engineering, 68. pp. 392-398. ISSN 1877-7058

Tay, Pei Wen and H'ng, Paik San and Chin, Kit Ling and Wong, Lih Jiun and Abdullah, Luqman Chuah (2013) Effects of steeping variables and substrate mesh size on starch yield extracted from oil palm trunk. Industrial Crops and Products, 44. pp. 240-245. ISSN 0926-6690; ESSN: 1872-633X

Teng, L. Y. and Chin, Nyuk Ling and Yusof, Yus Aniza (2013) Rheological and textural studies of fresh and freeze-thawed native sago starch-sugar gels. II. Comparisons with other starch sources and reheating effects. Food Hydrocolloids, 31 (2). pp. 156-165. ISSN 0268-005X; ESSN: 1873-7137

Togun, Hussein and Abdulrazzaq, Tuqa and Kazi, Md. Salim Newaz and Badarudin, A. and Mohd Ariffin, Mohd Khairol Anuar (2013) Heat transfer to laminar flow over a double backward-facing step. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineer, 7 (8). pp. 667-672. ISSN 2010-376X

Togun, Hussein and Abdulrazzaq, Tuqa and Kazi, Md. Salim Newaz and Kadhum, Abdul Amir Hassan and Badarudin, Ahmed and Mohd Ariffin, Mohd Khairol Anuar and Sadeghinezhad, Emad (2013) Numerical study of turbulent heat transfer in separated flow: review. International Review of Mechanical Engineering, 7 (2). pp. 337-349. ISSN 1970-8734; ESSN: 1970-8742

Toloue, Iraj and Hejazi, Farzad and Chin, Chee Huan and Jaafar, Mohd Saleh (2013) Evaluation of the effect of shear wall distribution in seismic response of precast framed structure. International Journal of Advancements Civil Structural and Environmental Engineering, 1 (1). pp. 62-65.

Toudeshki, Arash and Mariun, Norman and Hizam, Hashim and Abdul Wahab, Noor Izzri and Hojabri, Mojgan and Ali Sai’d, Yunusa and Saadatian, Omidreza and Mansoor, Muhammad and Saadatian, Elham (2013) Derivation of load peak voltage, power consumption and potential energy management in a thyristor controlled Marx impulse generator for capacitor discharge application. Majlesi Journal of Energy Management, 2 (2). pp. 1-5. ISSN 2322-3073

Uda, Muhammad Nur Aiman and Che Man, Hasfalina and Salam, Faridah and Ishak, Zamri and Bunawan, Siti Noraini and Hashim, Uda and Ariffin, Shahrul Aizzam and Adam, Tijjani (2013) Comparative study between ELISA and surface plasmon resonance (SPR) for rice tungro disease detection. Journal of Applied Sciences Research, 9 (11). pp. 5568-5571. ISSN 1816-157X

Umar, Ali Umar and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Tang, Sai Hong (2013) Conflict-free automated guided vehicles routing using multi-objective genetic algorithm. Research Journal of Applied Sciences, Engineering and Technology, 6 (14). pp. 2681-2684. ISSN 2040-7459; ESSN: 2040-7467

Varahram, Pooria and Mohd Ali, Borhanuddin (2013) Low Complexity Partial Transmit Sequence with Complex Gain Memory Predistortion in OFDM Systems. Wireless Personal Communications, 68 (4). pp. 1435-1448. ISSN 0929-6212

Varahram, Pooria and Mohd Ali, Borhanuddin and Al Azzo, Wisam (2013) IDRG-PTS scheme with low complexity for peak-to-average power ratio reduction in OFDM systems. Journal of the Chinese Institute of Engineers, 36 (6). pp. 677-683. ISSN 0253-3839

Varahram, Pooria and Mohd Ali, Borhanuddin and Mohammady, Somayeh (2013) A Robust Peak-to-Average Power Ratio Reduction Scheme by Inserting Dummy Signals with Enhanced Partial Transmit Sequence in OFDM Systems. Wireless Personal Communications, 72 (2). pp. 1125-1137. ISSN 0929-6212

Wan Ab. Karim Ghani, Wan Azlina and Idris, Azni and Awang Biak, Dayang Radiah and Rusli, Iffah Farizan (2013) An application of the theory of planned behaviour to study the influencing factors of participation in source separation of food waste. Waste Management, 33 (5). pp. 1276-1281. ISSN 0956-053X

Wan Ab. Karim Ghani, Wan Azlina and Mohd, Ayaz and Da Silva, Gabriel and Bachman, Robert T. and Yap, Taufiq Yun Hin and Rashid, Umer and Al-Muhtaseb, Ala'a H. (2013) Biochar production from waste rubber-wood-sawdust and its potential use in C sequestration: chemical and physical characterization. Industrial Crops and Products, 44. pp. 18-24. ISSN 0926-6690; ESSN: 1872-633X

Wan Ab. Karim Ghani, Wan Azlina and Mohd Salleh, Mohamad Amran and Rebitanim, Nur Zalikha and Rebitanim, Nur Akmal (2013) Potential applications of wastes from energy generation particularly biochar in Malaysia. Renewable and Sustainable Energy Reviews, 21. pp. 694-702. ISSN 1364-0321

Wan Ab. Karim Ghani, Wan Azlina and Rex, T. L. Ng and Douglas, H. S. Tay and Denny, K. S. Ng (2013) Modelling and optimisation of biomass fluidised bed gasifier. Applied Thermal Engineering, 61 (1). pp. 98-105. ISSN 1359-4311

Wan Ismail, Wan Ishak and Razali, Mohd Hudzari and Ramli, Mohd Rokli Hizra and A. Wahid, Muhamad Azhar and Abdullah, Abdul Aziz (2013) Engine Revolution per Minute Estimation Conversion for Field Experiment in Farm Mechanization Training. Journal of Modeling, Simulation, Identification and Control, 1 (2013). pp. 51-56. ISSN 1793-9623

Wan Ismail, Wan Ishak and Razali, Mohd Hudzari and Tan, M. Y. (2013) Development of an automation and control design system for lowland tropical greenhouses. Pertanika Journal of Science & Technology, 21 (1). pp. 357-366. ISSN 0128-7680; ESSN: 2231-8526

Wan Ismail, Wan Ishak and Shamshiri, Ramin (2013) Design and Analysis of Full-state Feedback Controller for a Tractor Active Suspension: Implications for Crop Yield. International Journal of Agriculture and Biology, 15 (5). pp. 909-914. ISSN 1560-5830

Wan Ismail, Wan Ishak and Shamshiri, Ramin (2013) Design and Simulation of Control Systems for Field Survey Mobile Robot Platform. Research Journal of Applied Sciences, Engineering and Technology, 6 (13). pp. 2307-2315. ISSN 2040-7459

Wan Ismail, Wan Ishak and Shamshiri, Ramin (2013) Exploring GPS Data for Operational Analysis of Farm Machinery. Research Journal of Applied Sciences, Engineering and Technology, 5 (12). pp. 3281-3286. ISSN 2040-7459

Wan Ismail, Wan Ishak and Shamshiri, Ramin (2013) A review of Greenhouse Climate Control and Automation Systems in Tropical Regions. Journal of Agricultural Science and Applications (JASA), 2 (3). pp. 175-182. ISSN 2227-6475

Wan Mokhtar, Wan Mohd Fadli and Taip, Farah Saleena and Ab. Aziz, Norashikin and Mohd Noor, Samsul Bahari (2013) Modeling, simulation and control of pink guava puree pasteurization process with fouling as disturbance. Journal of Food Process Engineering, 36 (6). pp. 834-845. ISSN 0145-8876; ESSN: 1745-4530

Wisitsoorat, Anurat and Ahmad, Muhammad Zamharir and Yaacob, Mohd. Hanif and Horpratum, Mati and Phakaratkul, Ditsayut and Lomas, Tanom and Tuantranont, Adisorn and Wlodarski, Wojtek (2013) Optical H2 sensing properties of vertically aligned Pd/WO3 nanorods thin films deposited via glancing angle rf magnetron sputtering. Sensors and Actuators B: Chemical, 182. pp. 795-801. ISSN 0925-4005; ESSN: 1873-3077

Wu, Jiantao and Md. Yusoff, Nur Izzi and Mohd Jakarni, Fauzan and Hainin, Mohd Rosli (2013) Correction of compliance errors in the dynamic shear modulus of bituminous binders data. Sains Malaysiana, 42 (6). pp. 783-792. ISSN 0126-6039

Yaacob, Mohd. Hanif and Ahmad, Muhammad Zamharir and Sadek, Abu Z. and Jian, Z. Ou and Latham, Kay and Wlodarski, Wojtek (2013) Facile synthesis of nanostructured WO3 thin films and their characterization for ethanol sensing. Materials Chemistry and Physics, 141 (3-Feb). pp. 912-919. ISSN 0254-0584

Yaacob, Mohd. Hanif and Ahmad, Muhammad Zamharir and Sadek, Abu Zafar and Jian, Zhen Ou and Campbell, Jos and Kalantar-zadeh, Kourosh and Wlodarski, Wojtek (2013) Optical response of WO3 nanostructured thin films sputtered on different transparent substrates towards hydrogen of low concentration. Sensors and Actuators B: Chemical, 177. pp. 981-988. ISSN 0925-4005

Yahya, Azmi and Hamdan, Khairunnisa and Ishola, Tajudeen Abiodun and Suryanto, Hadi (2013) Physical and mechanical properties of Jathropa curcas L. fruits from different planting densities. Journal of Applied Sciences, 13 (7). pp. 1004-1012. ISSN 1812-5654; ESSN: 1812-5662

Yahya, Azmi and Su, Vui Heong and El-Pebrian, Darius and Ishola, Tajudeen Abiodun (2013) Performance and economic comparisons of manual and mechanised fertiliser applications for mature oil palm. Planter , 89 (1046). pp. 323-340. ISSN 0126-575X

Yeo, Kwok Shien and Mahamd Adikan, Faisal Rafiq and Mokhtar, Makhfudzah and Hitam, Salasiah and Mahdi, Mohd Adzir (2013) Fiber optical parametric amplifier with double-pass pump configuration. Optics Express, 21 (25). pp. 31623-31631. ISSN 1094-4087

Yeoh, Beng Hoong and Loh, Yueh Feng and Abdullah, Luqman Chuah and Idrus, Juliwar and Pizzi, Antonio and Md. Tahir, Paridah and Jalaluddin, Harun (2013) Development a new method for pilot scale production of high grade oil palm plywood: effect of resin content on the mechanical properties, bonding quality and formaldehyde emission of palm plywood. Materials and Design, 52. pp. 828-834. ISSN 0264-1275; ESSN: 1873-4197

Yeoh, Hooi Sim and Chong, Gun Hean and Mohd Adzahan, Noranizan and Abdul Rahman, Russly and Choong, Thomas Shean Yaw (2013) Solubility measurement method and mathematical modeling in supercritical fluids. Engineering Journal, 17 (3). pp. 67-78. ISSN 0125-8281

Yi, Peng Teoh and Khan, Moonis Ali and Choong, Thomas Shean Yaw (2013) Kinetic and isotherm studies for lead adsorption from aqueous phase on carbon coated monolith. Chemical Engineering Journal, 217. pp. 248-255. ISSN 1385-8947

Ying, Siang Ban and Varatharajoo, Renuganth (2013) H∞ control option for a combined energy and attitude control system. Advances in Space Research, 52 (7). pp. 1378-1383. ISSN 0273-1177

Yoshizaki, Tatsuya and Shirai, Yoshihito and Hassan, Mohd Ali and Samsu Baharuddin, Azhari and Raja Abdullah, Nik Mustapha and Sulaiman, Alawi and Busu, Zainuri (2013) Improved economic viability of integrated biogas energy and compost production for sustainable palm oil mill management. Journal of Cleaner Production, 44. pp. 1-7. ISSN 0959-6526; ESSN: 1879-1786

Yusof, Mohammed and Abdullah, Luqman Chuah and M. A., Mohammed and Shitu, Abubakar (2013) Investigations of nickel (II) removal from aqueous effluents using electric arc furnace slag. Research Journal of Chemical Sciences, 3 (12). pp. 29-37. ISSN 2249-9261; ESSN: 2231-606X

Yusof, Yus Aniza and Aziz, Mohammad Gulzarul and Chin, Nyuk Ling and Mohd. Amin, Nor Amaiza and Lei, Pei Zea (2013) Compressibility and Dissolution Characteristics of Mixed Fruit Tablets Made from Guava and Pitaya Fruit Powders. Powder Technology, 247 (2013). pp. 112-119. ISSN 0032-5910

Yusuf, Mohammed and Babadei, Farahnaz Eghbali and Balavandy, Sepideh Keshan and Jamnani, Bahador Dastorian and Hosseini, Soraya and Malekbala, Mohamad Rasool and Abdullah, Luqman Chuah (2013) Removal of Ni (II) from aqueous solution by an electric arc furnace slag using artificial neural network approach. Advances in Environmental Biology, 7 (9). pp. 2303-2310. ISSN 1995-0756; ESSN: 1998-1066

Yusuf, Sara Yasina and M., Rashid and Abdullah, Luqman Chuah and M., Suhaimi and Mohamed Noor, Norazian (2013) Characteristics of airborne Pm2.5 and Pm2.5-10 in the urban environment of Kuala Lumpur. Advanced Materials Research, 620. pp. 502-510. ISSN 1022-6680; ESSN: 1662-8985

Zahari, Nur Ismarrubie and Loh, Kar Wai and Yussof, Hanafiah (2013) Effect of heat treatment on mechanical properties and susceptibility to stress corrosion cracking of aluminium alloy. Advanced Materials Research, 845. pp. 178-182. ISSN 1022-6680; ESSN: 1662-8985

Zahari, Nur Ismarrubie and Salit, Mohd Sapuan and Alhaji Abba, Hammajam (2013) Review of agro waste plastic composites production. Journal of Minerals and Materials Characterization and Engineering, 1 (5-Sep). pp. 271-279. ISSN 2327-4085

Zainal Abidin, Munira and Shamsuddin, Rosnah and Othman, Zaulia and Abdul Rahman, Russly (2013) Effect of postharvest storage of whole fruit on physico-chemical and microbial changes of fresh-cut cantaloupe (Cucumis melo L. reticulatus cv. Glamour). International Food Research Journal, 20 (2). pp. 953-960. ISSN 1985-4668; ESSN: 2231-7546

Zainal Abidin, Zurina and Ahmadun, Fakhru'l-Razi and Ismail, Mohd Halim Shah and Haddadian, Zahra and Shavandi, Mohammad Amin (2013) Removal Methyl Orange from Aqueous Solutions Using Dragon Fruit (Hylocereusundatus) Foliage. Chemical Science Transactions, 2 (3). 900-910 . ISSN 2278-3458

Zainal Abidin, Zurina and Sobri, Shafreeza and Mohd Shamsudin, Nur Syuriati and Madehi, Norhafizah (2013) Optimization of a method to extract the active coagulant agent from jatropha curcas seeds for use in turbidity removal. Industrial Crops and Products, 41 (1). pp. 319-323. ISSN 0926-6690

Zainal Abidin, Zurina and Yunus, Robiah and Sayyar, Sepidar (2013) Optimisation of solid liquid extraction of jatropha oil using petroleum ether. Asia-Pacific Journal of Chemical Engineering, 8 (3). pp. 331-338. ISSN 1932-2143

Zakaria, Nor Azura and Wan Hassan, Wan Zuha and Abdul Halin, Izhal and Mohd Sidek, Roslina and Xiao, Qing Wen (2013) Fault detection with optimum March test algorithm. Journal of Theoretical and Applied Information Technology, 47 (1). pp. 18-27. ISSN 1992-8645; ESSN: 1817-3195

Zakaria @ Mamat, Mohd Rafein and Ariffin, Hidayah and Abd. Aziz, Suraini and Hassan, Mohd Ali and Shirai, Yoshihito (2013) Improved properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) produced by Comamonas sp. EB172 utilizing volatile fatty acids by regulating the nitrogen source. BioMed Research International, 2013. art. no. 237806. pp. 1-7. ISSN 2314-6133; ESSN: 2314-6141

Zamri, Ruzaidi and Ismail, Napsiah and Baharudin, B. T. Hang Tuah and Mohamed Ariff, Azmah Hanim and Prabuwono, Anton Satria (2013) Vision sensor application for intelligent polishing robotic cell. Applied Mechanics and Materials, 300-301. pp. 436-439. ISSN 1660-9336; ESSN: 1662-7482

Zarafshan, Faraneh and Karimi, Abbas and Al-Haddad, Syed Abdul Rahman and Saripan, M. Iqbal and Subramaniam, Shamala (2013) Ancestral dynamic voting algorithm for mutual exclusion in partitioned distributed systems. International Journal of Distributed Sensor Networks, 2013. art. no. 120308. pp. 1-15. ISSN 1550-1329; ESSN: 1550-1477

Zolfaghari, Reza and Ahmadun, Fakhru'l-Razi and Othman, Mohamed Rozali and Wan Daud, Wan Ramli and Ismail, Manal (2013) Nonionic surfactant-templated mesoporous carbon as an electrocatalyst support for methanol oxidation. Materials Chemistry and Physics, 139 (1). pp. 262-269. ISSN 0254-0584; ESSN: 1879-3312

Zubair, Mohammed and Abdullah, Mohammed Zulkifly and Ahmad, Kamarul Arifin (2013) Hybrid mesh for nasal airflow studies. Computational and Mathematical Methods in Medicine, 2013. art. no. 727362. pp. 1-7. ISSN 1748-670X; ESSN: 1748-6718

Zubair, Mohammed and Riazuddin, Vizy Nazira and Abdullah, Mohammad Zulkifly and Rushdan, Ismail and Shuaib, Ibrahim Lutfi and Ahmad, Kamarul Arifin (2013) Computational fluid dynamics study of pull and plug flow boundary condition on nasal airflow. Biomedical Engineering-Applications Basis Communications, 25 (4). pp. 1-8. ISSN 1016-2372; ESSN: 1793-7132

Book Section

Ben-Mubarak, Mohammed Awadh and Mohd Ali, Borhanuddin and Noordin, Nor Kamariah and Ismail, Alyani and Ng, Chee Kyun (2013) Hybrid AHP and TOPSIS methods based cell selection (HATCS) scheme for mobile WiMAX. In: Selected topics in WiMAX. InTech, Rijeka, Croatia, pp. 85-101. ISBN 9789535111573

Md. Yunus, Nurul Amziah (2013) Microfluidic devices fabrication for bioelectrokinetic system applications. In: Electrochemistry. InTech, Croatia. ISBN 9789535110187

Zainal Abidin, Zurina and Awang Biak, Dayang Radiah and Mohd.Yusoff, Hamdan and Harun, Mohd Yusof (2013) Solid liquid extraction in biorefinery. In: Separation and Purification Technologies in Biorefineries. John Wiley, Chichester, UK, pp. 351-374. ISBN 9780470977965; EISBN: 9781118493441

Zainuddin, Zawani and Abdullah, Luqman Chuah and Ahmadun, Fakhru'l-Razi and Abdan, Khalina (2013) Acclimatization process of microorganisms from activated sludge in kenaf-retting wastewater. In: Developments in Sustainable Chemical and Bioprocess Technology. Springer, New York, pp. 59-64. ISBN 9781461462071; EISBN: 9781461462088

Conference or Workshop Item

Abd Aziz, Nor Azwady and Idris, Azni and Mustafa, Muskhazli and Omar, Hishamuddin and Wan Ab. Karim Ghani, Wan Azlina (2013) Integrated vermin-AD technology in managing household waste in Pulau Tioman; survey on materials available for vermicomposting and analysis on plant nutrient contents of the vermicompost. In: Persidangan Kebangsaan Pertama Program Pemindahan Ilmu (KTP 01), 21-23 Ogos 2013, Equatorial Hotel, Bangi. (pp. 1019-1023).

Abd Rahman, Nur Aira and Ramli, Abdul Rahman and Lombigit, Lojius and Abdullah, Nor Arymaswati and Khalid, Mohd Ashhar (2013) Stimulus generation technique for code simulation of FPGA based gamma spectroscopy system. In: International Nuclear Science, Technology & Engineering Conference 2013 (iNuSTEC2013), 30 Sept.-2 Oct. 2013, Kuala Lumpur, Malaysia. (pp. 77-83).

Abdul Rahman, Nor Farahaida and Mohd Radzi, Mohd Amran and Mariun, Norman and Che Soh, Azura and Abd Rahim, Nasrudin (2013) Integration of dual intelligent algorithms in shunt active power filter. In: 2013 IEEE Conference on Clean Energy and Technology (CEAT), 18-20 Nov. 2013, Langkawi, Kedah, Malaysia. (pp. 259-264).

Abdul Rahman, Ribhan Zafira and Yusof, Rubiyah and Ismail, Fatimah Sham (2013) Model-based fault detection and diagnosis optimization for process control rig. In: 9th Asian Control Conference (ASCC 2013), 23-26 June 2013, Istanbul, Turkey. .

Abdulhasan, Muntadher Qasim and Salman, Mustafa Ismael and Ng, Chee Kyun and Noordin, Nor Kamariah and Hashim, Shaiful Jahari and Hashim, Fazirulhisyam (2013) Approximate linear minimum mean square error estimation based on channel quality indicator feedback in LTE systems. In: 2013 IEEE 11th Malaysia International Conference on Communications (MICC), 26-28 Nov. 2013, Kuala Lumpur, Malaysia. (pp. 446-451).

Abdulhasan, Muntadher Qasim and Salman, Mustafa Ismael and Ng, Chee Kyun and Noordin, Nor Kamariah and Hashim, Shaiful Jahari and Hashim, Fazirulhisyam (2013) A threshold feedback compression scheme of channel quality indicator (CQI) in LTE systems. In: 2013 IEEE Student Conference on Research and Development (SCOReD), 16-17 Dec. 2013, Putrajaya, Malaysia. (pp. 181-186).

Abdullah, Luqman Chuah and Tan, Yen Chen (2013) Case study: comparison of air dispersion from solid waste incinerator emission using AERMOD and ISCST3. In: International Conference on Environmental Forensics 2013, 11-14 Nov. 2013, Marriot Hotel, Putrajaya, Malaysia. (pp. 469-474).

Al-Alimi, Abdulmoghni Ali Wazae and Yaacob, Mohd Hanif and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir and Al-Mansoori, Mohammed Hayder and Mokhtar, Makhfudzah (2013) Widely tunable multiwavelength hybrid Brillouin-erbium fiber laser utilizing virtual mirror. In: 4th International Conference on Photonics (ICP2013), 28-30 Oct. 2013, Equatorial Hotel Melaka, Malaysia. (pp. 44-46).

Al-Dabbagh, Mohanad Dawood Hasan and Raja Abdullah, Raja Syamsul Azmir and Al-Dabbagh, Rawaa Dawoud Hassan and Hashim, Fazirulhisyam (2013) Differential evolution algorithm for linear frequency modulation radar signal denoising. In: 2013 IEEE International RF and Microwave Conference (RFM2013), 9-11 Dec. 2013, Bayview Beach Resort Penang, Malaysia. (pp. 234-237).

Al-Doski, Jwan M. Mohammed and Mansor, Shattri and Mohd Shafri, Helmi Zulhaidi (2013) Support vector machine classification to detect land cover changes in Halabja city, Iraq. In: 2013 IEEE Business Engineering and Industrial Applications Colloquium (BEIAC 2013), 7-9 Apr. 2013, Langkawi, Kedah, Malaysia. (pp. 353-358).

Al-Jumaily, Abdulmajeed Hammadi Jasim and Sali, Aduwati and Ismail, Alyani and Jit Singh, Mandeep Singh and Al-Saegh, Ali Mohammed (2013) Performance analysis of rain attenuation at Ku-band in Malaysia. In: 2013 IEEE International Conference on Space Science and Communication (IconSpace), 1-3 July 2013, Hotel Equatorial Melaka, Malaysia. (pp. 160-163).

Al-Maqri, Mohammed Ahmed Mohammed and Othman, Mohamed and Mohd Ali, Borhanuddin and Mohd Hanapi, Zurina (2013) Adaptive TXOP assignment for QoS support of video traffic in IEEE 802.11e networks. In: 2013 IEEE International RF and Microwave Conference (RFM2013), 9-11 Dec. 2013, Bayview Beach Resort Penang, Malaysia. (pp. 144-149).

Alezabi, Kamal Ali Ahmed and Hashim, Fazirulhisyam and Hashim, Shaiful Jahari and Mohd Ali, Borhanuddin (2013) A new tunnelled EAP based authentication method for WiMAX networks. In: 2013 IEEE 11th Malaysia International Conference on Communications (MICC), 26-28 Nov. 2013, Kuala Lumpur, Malaysia. (pp. 412-417).

Alhawari, Adam Reda Hasan and Ismail, Alyani and Jalal, Ali Sadeq Abdulhadi and Raja Abdullah, Raja Syamsul Azmir and A. Rasid, Mohd Fadlee (2013) U-shaped inductively coupled feed RFID tag antenna for gain enhancement. In: 2013 IEEE International Conference on RFID-Technologies and Applications (RFID-TA), 4-5 Sept. 2013, Johor Bahru, Malaysia. .

Almassri, Ahmed M. M. and Wan Hasan, Wan Zuha and Ahmad, Siti Anom and Ishak, Asnor Juraiza (2013) A sensitivity study of piezoresistive pressure sensor for robotic hand. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013), 25-27 Sept. 2013, Langkawi, Kedah, Malaysia. (pp. 394-397).

Aminian, Masoud and Ab Kadir, Mohd Zainal Abidin and Ali, Salmiaton and Wan Ahmad, Wan Fatinhamamah and Ishak, Mohd Taufiq and Izadi, Mahdi (2013) Correlation of furfural and moisture content with age of transformers. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 366-368).

Annuar, Ahsan Nur Mubarak and Mohd Rafie, Azmin Shakrine and Hameed Sultan, Mohamed Thariq (2013) The study of blockages effect at leading edge on rectangular cavity in subsonic flow using particle image velocimetry (PIV). In: 2nd International Conference on Mechatronics and Applied Mechanics, ICMAM 2012, 8-9 Dec. 2012, Taipei. (pp. 781-784).

Aravind, C. V. and Misron, Norhisam and Raja Othman, Raja Nor Firdaus Kashfi and Aris, Ishak and Marhaban, Mohammad Hamiruce and Nirei, Masami (2013) Analysis on the torque characteristics due to outer rotor displacement in the double rotor switched reluctance machine. In: 10th IEEE International Conference on Power Electronics and Drive Systems (PEDS), 22-25 Apr. 2013, Kitakyushu, Japan. (773 -777).

Ariafar, Shahram and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar and Say, Hong Tang and Firoozi, Zahra (2013) Illustration and model verification for an inter-cell and intra-cell facility layout problem in a cellular manufacturing system. In: International Conference on Information Technology and Management Innovation, ICITMI 2012, 10-11 Nov. 2012, Guangzhou; China. (pp. 1310-1314).

Awwad, Samer A. B. and Ng, Chee Kyun and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin and Hashim, Fazirulhisyam (2013) Second and subsequent fragments headers compression scheme for IPv6 header in 6LoWPAN network. In: 2013 Seventh International Conference on Sensing Technology (ICST), 3-5 Dec. 2013, Wellington, New Zealand. (pp. 771-776).

Azadian, Farshad and Mohd Radzi, Mohd Amran and Abdul Wahab, Noor Izzri (2013) Controlled islanding strategy for power systems based on flexible semi-supervised spectral clustering. In: 2013 IEEE Student Conference on Research and Development (SCOReD), 16-17 Dec. 2013, Putrajaya, Malaysia. (pp. 454-458).

Beh, Kean Sheng and Jaafar, Haslina and Md Yunus, Nurul Amziah and Shafie, Suhaidi (2013) Design and simulation of low voltage RF MEMS series switch array. In: 2013 IEEE International Conference on Circuits and Systems (ICCAS 2013), 18-19 Sept. 2013, Kuala Lumpur, Malaysia. (pp. 154-158).

Chai, Ee Wen and H'ng, Paik San and Abdu, Arifin and Abdullah, Luqman Chuah (2013) Calorific values and chemical composition of fast growing timber species. In: International Forestry Graduate Students' Conference 2013 (FORGRAD 2013), 2-4 July 2013, Universiti Putra Malaysia, Serdang, Selangor. (pp. 87-91).

Chamran, Mohammad Kazem and Shafie, Suhaidi (2013) Non-invasive application for domestic pipeline monitoring and corrosion detection. In: 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2013), 26-27 Nov. 2013, Royale Bintang Hotel, Kuala Lumpur, Malaysia. .

Che Soh, Azura and Ishak, Asnor Juraiza and Zaini, Mohd Hanif (2013) Smart monitoring fault detection system for malfunction traffic light operation. In: The 8th IEEE Conference on Industrial Electronics and Application (ICIEA 2013), 19 - 21 June 2013, Melbourne, Australia. (549-554 ).

Che Soh, Azura and Marhaban, Mohammad Hamiruce and Khalid, Marzuki and Yusof, Rubiyah (2013) A discrete-event traffic simulation model for multilane-multiple intersection. In: 9th Asian Control Conference (ASCC 2013), 23-26 June 2013, Istanbul, Turkey. (pp. 1-7).

Cholan, Noran Azizan and Al-Mansoori, Mohammed Hayder and Muhammad Noor, Ahmad Shukri and Ismail, Alyani and Mahdi, Mohd Adzir (2013) Impact of four wave mixing on OSNR of multiwavelength Brillouin-erbium fiber laser. In: 4th International Conference on Photonics (ICP2013), 28-30 Oct. 2013, Equatorial Hotel Melaka, Malaysia. (pp. 81-83).

Choo, Hong Ning and Varahram, Pooria and Mohd Ali, Borhanuddin (2013) DSP implementation of digital pre-distortion in wireless communication systems. In: 2013 IEEE 11th Malaysia International Conference on Communications (MICC), 26-28 Nov. 2013, Kuala Lumpur, Malaysia. (pp. 207-212).

Chow, Kar Kit and Che Soh, Azura and Mohamad Yusof, Umi Kalsom and Ishak, Asnor Juraiza and Hassan, Mohd Khair and Khamis, Shamsul (2013) E-nose herbs recognition system based on artificial neural network technique. In: 2013 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2013), 29 Nov.-1 Dec. 2013, Penang, Malaysia. (pp. 58-62).

Djojodihardjo, Harijono (2013) Aircraft trailing vortices - cirrus cloud interaction and green aircraft technology: an overview. In: 2013 IEEE International Conference on Space Science and Communication (IconSpace), 1-3 July 2013, Melaka, Malaysia. (pp. 318-323).

Dodangeh, Javad and Mohd Yusuff, Rosnah (2013) Development of a decision model for selecting action plans in EFQM. In: 5th International Conference on Industrial Engineering and Systems Management (IESM 2013), 28-30 Oct. 2013, Rabat, Morocco. .

Dong, Xianling and Mohd Saad, Wira Hidayat and Wan Adnan, Wan Azizun and Hashim, Suhairul and Mohd. Hassan, Nor Pai'za and Nordin, Abdul Jalil and Saripan, M. Iqbal (2013) Simulation of intrinsic resolution of scintillation camera in Monte Carlo environment. In: 2013 IEEE International Conference on Signal and Image Processing Applications (ICSIPA), 8-10 Oct. 2013, Melaka, Malaysia. (pp. 11-14).

Esfahani, Mohammad Tolou Askari Sedehi and Ab Kadir, Mohd Zainal Abidin and Hizam, Hashim and Jasni, Jasronita (2013) Evaluation of uncertainties on generation expansion planning. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 273-276).

Esfahani, Mohammad Tolou Askari Sedehi and Ab Kadir, Mohd Zainal Abidin and Hizam, Hashim and Jasni, Jasronita (2013) On the selection of wind turbine generator based on ARMA time series. In: 2013 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology (CSUDET), 30-31 May 2013, Multimedia University, Cyberjaya, Selangor, Malaysia. (pp. 42-45).

Fallah, Narjes and Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin and Nourirad, Ghasem and Baojahmadi, Mina and Ahmed, Rebaz J. (2013) Lightning protection techniques for roof-top PV systems. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 417-421).

Farzan, Payam and Soheilirad, Mohammadsoroush and Othman, Mohammad Lutfi and Hojabri, Mojgan and Broujerdian, M. M. (2013) CFD analysis of wind blocking vs. venturi effect: a case study in tropical climate. In: 2013 International Conference on Renewable Energy and Sustainable Energy (ICRESE'13), 5-6 Dec. 2013, Karunya University, India. (pp. 192-195).

Firoozi, Zahra and Ismail, Napsiah and Ariafar, Shahram and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar (2013) A genetic algorithm for solving supply chain network design model. In: International Conference on Mathematical Sciences and Statistics 2013 (ICMSS2013), 5-7 Feb. 2013, Kuala Lumpur, Malaysia. (pp. 211-214).

Flayyih, Wameedh Nazar and Samsudin, Khairulmizam and Hashim, Shaiful Jahari and Rokhani, Fakhrul Zaman and Ismail, Yehea I. (2013) Improved undetected error probability model for JTEC and JTEC-SQED coding schemes. In: 2013 IEEE International Conference on Circuits and Systems (ICCAS 2013), 18-19 Sept. 2013, Kuala Lumpur, Malaysia. (pp. 27-32).

Fukuhara, Teruyuki and Terasaki, Hiroaki and Yamaji, Takahiro and Ahsan, Amimul (2013) Cost and production performance of a tubular solar still. In: 2013 1st International Conference & Exhibition on the Applications of Information Technology to Renewable Energy Processes and Systems (IT-DREPS 2013), 29-31 May 2013, University of Petra, Amman, Jordan. (pp. 9-14).

Garmabdari, Rasoul and Shafie, Suhaidi and Mohd Isa, Maryam and Garmabdari, Alireza (2013) Measurement technique for bidirectional four sensor rotary encoder. In: 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2013), 26-27 Nov. 2013, Royale Bintang Hotel, Kuala Lumpur, Malaysia. .

Ghazanfarpour, Behzad and Mohd Radzi, Mohd Amran and Mariun, Norman and Shoorangiz, Reza (2013) Adaptive unified neural network for dynamic power quality compensation. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 114-118).

Gilanian Sadeghi, Mohammad Mehdi and Mohd Ali, Borhanuddin and Ab Manan, Jamalul-lail and Noordin, Nor Kamariah and Hashim, Fazirulhisyam (2013) An energy saving scheme for key management protocol in IEEE802.16e. In: 2013 IEEE TENCON Spring Conference, 17-19 Apr. 2013, Sydney, Australia. (pp. 525-529).

Girei, Saad Hayatu and Shabaneh, Arafat Abdallah Abdelwadod and M. Thirunavakkarasu, Punithavathi and Paiman, Suriati and Yaacob, Mohd Hanif (2013) Tapered multimode fiber sensor for ethanol sensing application. In: 4th International Conference on Photonics (ICP2013), 28-30 Oct. 2013, Equatorial Hotel Melaka, Malaysia. (pp. 275-277).

Hairuddin, Abdul Aziz and Wandel, Andrew P. and Yusaf, Talal (2013) A homogeneous charge compression ignition engine: an introduction. In: 3rd Malaysian Postgraduate Conference (MPC2013), 4-5 July 2013, Education Malaysia Australia (EMA), Sydney, New South Wales, Australia. (pp. 37-47).

Halimi, Siti Umairah and Abu Bakar, Noor Fitrah and Ismail, Siti Norazian and Abd Hashib, Syafiza and Naim, Mohd Nazli (2013) Electrospray deposition of titanium dioxide (TiO2) nanoparticles. In: 5th Nanoscience and Nanotechnology Symposium (NNS 2013), 23-25 Oct. 2013, Surabaya, Indonesia. (pp. 57-62).

Hamad, Salih Gwami Mohammed and Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi (2013) Safety issues of capacitor banks in medium voltage systems. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 422-426).

Hanafi, Marsyita and Wan Adnan, Wan Azizun and S. Ahmad, S. M. (2013) An efficient algorithm for oval shape face detection in color family photos. In: International Conference On Intelligence Information Processing, 1-3 Apr. 2013, Seoul, Korea. .

Harun, Harlisya and Ungku Chulan, Ungku Azlin Nur and Ungku Chulan, Ungku Azmi Iskandar and Khazani, Khamizon (2013) Improving the evaluation of generator matrix G by initial upper bound estimation. In: 2013 Computing, Communications and IT Applications Conference (ComComAp), 1-4 Apr. 2013, Hong Kong, China. (pp. 85-89).

Hassan, Mohd Roshdi and Mehrpouya, Mehrshad and Emamian, Sattar and Sheikholeslam, Mohammad Nassir (2013) Review of self-healing effect on shape memory alloy (SMA) structures. In: 3rd International Conference on Key Engineering Materials, ICKEM 2013, 8-9 Mar. 2013, Kota Kinabalu, Sabah. (pp. 87-92).

Hesamian, Mohammad Hesam and Mashohor, Syamsiah and Saripan, M. Iqbal and Wan Adnan, Wan Azizun (2013) Scene illumination classification using illumination histogram analysis and neural network. In: 2013 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2013), 29 Nov.-1 Dec. 2013, Penang, Malaysia. (pp. 290-295).

Hoon, Yap and Kamsani, Noor Ain and Mohd Sidek, Roslina and Sulaiman, Nasri and Rokhani, Fakhrul Zaman (2013) Energy efficient 8-bit microprocessor for wireless sensor network applications. In: 2013 4th Annual International Conference on Energy Aware Computing Systems and Applications (ICEAC), 16-18 Dec. 2013, Istanbul, Turkey. (pp. 147-151).

Hussain, Siti Aslina and Abdullah, Norhafizah and Idris, Azni and Tan, Hong Tat and Abdul Hamid, Mohd Ismail (2013) Experimental validation of CFD result on pressure drop in artificial blood conduit. In: 9th World Congress of Chemical Engineering. Incorporating 15th Asian Pacific Conference Of Chemical Engineering Congress (WCCE 9/APCCHE 2013) , 18-23 Aug. 2013, Seoul, Korea. .

Idris, Azni and Abd Aziz, Nor Azwady and Wan Ab. Karim Ghani, Wan Azlina and Bawon, Paiman and Abd. Ghani, Awang Noor and Mohd Don, Azura and Sharif, Mohd Hafiz and Zam @ Zambahari, Rozaini (2013) Vermicomposting for municipal solid waste recycling to promote green technology. In: Persidangan Kebangsaan Pertama Program Pemindahan Ilmu (KTP 01), 21-23 Ogos 2013, Equatorial Hotel, Bangi. (pp. 1011-1018).

Iranmanesh, Vahab and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Wan Adnan, Wan Azizun and Malallah, Fahad Layth and Yussof, Salman (2013) Online signature verification using neural network and Pearson correlation features. In: 2013 IEEE Conference on Open Systems (ICOS), 2-4 Dec. 2013, Sarawak, Malaysia. (pp. 18-21).

Ishak, Asnor Juraiza and Che Soh, Azura and Marhaban, Mohammad Hamiruce and Khamis, Shamsul and Ghasab, Mohammad Ali Jan (2013) Automated recognition of Ficus deltoidea using ant colony optimization technique. In: 2013 IEEE 8th Conference on Industrial Electronics and Applications (ICIEA), 19-21 June 2013, Melbourne, Australia. (pp. 296-300).

Ismail, Siti Norazian and Abdul Rashid, Suraya and Abdullah, Norhafizah (2013) The effects of catalyst introduction in carbon fiber coating process via CVD on tensile properties of carbon fiber reinforced polypropylene composite. In: 2013 IEEE Business Engineering and Industrial Applications Colloquium (BEIAC 2013), 7-9 Apr. 2013, Langkawi, Kedah, Malaysia. (pp. 538-543).

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Hajikhani, Maryam (2013) On the behavior of lightning induced voltage. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 109-113).

Jaafar, Haslina and Che Soh, Azura and Wan Hasan, Wan Zuha and Marhaban, Mohammad Hamiruce and Abd Rashid, Shaufiq (2013) A wireless flipper robot using interface free controller. In: The 8th IEEE Conference on Industrial Electronics and Applications (ICIEA 2013), 19-21 June 2013, Melbourne, Australia. (1676 -1680 ).

Jalal, Ali Sadeq Abdulhadi and Ismail, Alyani and Alhawari, Adam Reda Hasan and A. Rasid, Mohd Fadlee and Noordin, Nor Kamariah and Mahdi, Mohd Adzir (2013) Metal mount fractal RFID tag antenna with complementary split ring resonator. In: 2013 IEEE International Conference on RFID-Technologies and Applications (RFID-TA), 4-5 Sept. 2013, Johor Bahru, Malaysia. .

Jamalud-din, Amirull-din and Hitam, Salasiah and Abu Bakar, Muhammad Hafiz (2013) Half-opened cavity random distributed feedback laser with FBG wavelength variation. In: 4th International Conference on Photonics (ICP2013), 28-30 Oct. 2013, Equatorial Hotel Melaka, Malaysia. (pp. 303-305).

Jamaluddin, Nurul Fauzani and Ahmad, Siti Anom and Mohd Noor, Samsul Bahari and Wan Hasan, Wan Zuha and Kamal, Mustaffa and Aminnudin, Azan and Abd. Kadir Bakti, Zulkifli (2013) Two electrodes system: performance on ECG, FECG and EMG detection. In: 2013 IEEE Student Conference on Research and Development (SCOReD), 16-17 Dec. 2013, Putrajaya, Malaysia. (pp. 506-510).

Jordehi, Ahmad Rezaee and Jasni, Jasronita and Abdul Wahab, Noor Izzri and Ab Kadir, Mohd Zainal Abidin (2013) Particle swarm optimisation applications in FACTS optimisation problem. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 193-198).

Kakaee, Majid H. and Seyedzadeh, Saleh and Fadhil, Hilal Adnan and Ahmad Anas, Siti Barirah and Mokhtar, Makhfudzah (2013) New dynamic technique for SAC-OCDMA system. In: 4th International Conference on Photonics (ICP2013), 28-30 Oct. 2013, Equatorial Hotel Melaka, Malaysia. (pp. 120-122).

Khanaki, Razieh and Marhaban, Mohammad Hamiruce and Mohd Radzi, Mohd Amran (2013) Comparison of ANN and P&O MPPT methods for PV applications under changing solar irradiation. In: IEEE Conference on Clean Energy and Technology (CEAT 2013), 18-20 Nov. 2013 , Langkawi, Kedah, Malaysia. (pp. 287-292).

Kharazi, Seyed Mohammad Saleh Seyedzadeh and Sahbudin, Ratna Kalos Zakiah and Abas, Ahmad Fauzi and Ahmad Anas, Siti Barirah (2013) Weight optimization of variable weight OCDMA for triple-play services. In: 4th International Conference on Photonics (ICP2013), 28-30 Oct. 2013, Equatorial Hotel Melaka, Malaysia. (pp. 99-101).

Khoshsirat, Nima and Md Yunus, Nurul Amziah and Hamidon, Mohd Nizar and Shafie, Suhaidi and Amin, Nowshad (2013) ZnO doping profile effect on CIGS solar cells efficiency and parasitic resistive losses based on cells equivalent circuit. In: 2013 IEEE International Conference on Circuits and Systems (ICCAS 2013), 18-19 Sept. 2013, Kuala Lumpur, Malaysia. (pp. 86-91).

Khosravi, Faranak and Mokhtar, Makhfudzah and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir and Mahdiraji, Ghafour Amouzad (2013) Investigation of three level code division multiplexing performance over high speed optical fiber communication system. In: 4th International Conference on Photonics (ICP2013), 28-30 Oct. 2013, Equatorial Hotel Melaka, Malaysia. (pp. 132-134).

Khosro, Khorramnia and Mohamed Shariff, Abdul Rashid and Abdul Rahim, Anuar and Mansor, Shattri (2013) Toward Malaysian sustainable agriculture in 21st century. In: 8th International Symposium of the Digital Earth (ISDE8), 26–29 Aug. 2013, Kuching, Sarawak. (pp. 1-5).

Khuzaimah, Zailani and Ismail, Mohd Hasmadi and Mansor, Shattri (2013) Mangrove changes analysis by remote sensing and evaluation of ecosystem service value in Sungai Merbok's Mangrove Forest Reserve, Peninsular Malaysia. In: 13th International Conference on Computational Science and Its Applications (ICCSA 2013), 24-27 June 2013, Ho Chi Minh City, Vietnam. (pp. 611-622).

Kiehbadroudinezhad, Shahideh and Ng, Chee Kyun and Noordin, Nor Kamariah (2013) Expansion of a Y-shaped array antennas for radio astronomy. In: 2013 IEEE International Conference on Space Science and Communication (IconSpace), 1-3 July 2013, Hotel Equatorial Melaka, Malaysia. (pp. 39-44).

M. Thirunavakkarasu, Punithavathi and Shabaneh, Arafat Abdallah Abdelwadod and Girei, Saad Hayatu and Yaacob, Mohd Hanif and Muhammad Noor, Ahmad Shukri (2013) Enhancement of fiber-SPR sensor utilizing graphene oxide. In: 4th International Conference on Photonics (ICP2013), 28-30 Oct. 2013, Equatorial Hotel Melaka, Malaysia. (pp. 148-149).

Mat Nawi, Nazmi and Chen, Guangnan and Jensen, Troy (2013) Visible and shortwave near infrared spectroscopy to predict sugarcane quality from clear and raw juice samples. In: 3rd Malaysian Postgraduate Conference (MPC2013), 4-5 July 2013, Education Malaysia Australia (EMA), Sydney, New South Wales, Australia. (pp. 167-174).

Mat Rusni, Izyani and Ismail, Alyani and Alhawari, Adam Reda Hasan and Hamidon, Mohd Nizar and Yusof, Nor Azah and Mohd Isa, Maryam (2013) Centered-gap and aligned-gap multiple split ring resonator for bio-sensing application. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013), 25-27 Sept. 2013, Langkawi, Kedah, Malaysia. (pp. 62-65).

Md Ali, S. F. and Xianling, D. and Muhammad Noor, Ahmad Shukri and Rokhani, Fakhrul Zaman and Hashim, Suhairul and Saripan, M. Iqbal (2013) Modelling of light photons detection in scintillation camera. In: 2013 IEEE International Conference on Signal and Image Processing Applications (ICSIPA), 8-10 Oct. 2013, Melaka, Malaysia. (pp. 15-19).

Md Yunus, Nurul Amziah and Hamidon, Mohd Nizar and Abdul Halin, Izhal and Zainal Abidin, Zurina and Green, Nicolas G. (2013) Optics experimental unit and analysis housing for maximum dielectrophoresis (DEP) and AC electrokinetics operations. In: 2013 6th Biomedical Engineering International Conference (BMEiCON 2013), 23-25 Oct. 2013, Amphur Muang, Krabi, Thailand. .

Mirzaei, Maryam and Jasni, Jasronita and Hizam, Hashim and Abdul Wahab, Noor Izzri and Moazami, Ehsan (2013) Static voltage stability analysis using generalized regression neural network. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 391-396).

Moazami, Ehsan and Ab Kadir, Mohd Zainal Abidin and Hizam, Hashim and Izadi, Mahdi and Mirzaei, Maryam (2013) Optimal penalty method in distribution service restoration using genetic algorithm. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 397-401).

Mohammad, Khairul Azhar and Zainudin, Edi Syams and Salit, Mohd Sapuan and Zahari, Nur Ismarrubie and Ali, Aidy (2013) Creep test of type austenitic 316L stainless steel at high temperature. In: 3rd International Conference on Green Building, Materials and Civil Engineering, GBMCE 2013, 22-23 Aug. 2013, Taiwan. (pp. 708-711).

Mohammad, Mazian and Abdullah, Shahrum and Jamaludin, Nordin and Inayatullah, Othman (2013) Fatigue life prediction of the SAE 1045 medium carbon steel using the acoustic emission technique associated with Weibull distribution approach. In: 2013 International Conference on Technology, Informatics, Management, Engineering & Environment (TIME-E 2013), 23-26 June 2013, Bandung, Indonesia. (pp. 23-27).

Mohammadpoor, Mojtaba and Raja Abdullah, Raja Syamsul Azmir and Ismail, Alyani and Abas, Ahmad Fauzi (2013) A ground based circular synthetic aperture radar. In: International Radar Symposium (IRS 2013), 19-21 June 2013, Dresden, Germany. (pp. 521-526).

Mohammady, Somayeh and Sulaiman, Nasri and Mohd Sidek, Roslina and Hamidon, Mohd Nizar and Varahram, Pooria (2013) FPGA implementation of low complexity crest factor reduction in OFDM systems. In: 2013 IEEE 11th Malaysia International Conference on Communications (MICC), 26-28 Nov. 2013, Kuala Lumpur, Malaysia. (pp. 157-161).

Mohammed Salih, Dhiadeen and Mohd Noor, Samsul Bahari and Marhaban, Mohammad Hamiruce and Raja Ahmad, Raja Mohd Kamil (2013) Wavelet network based online sequential extreme learning machine for dynamic system modeling. In: 9th Asian Control Conference (ASCC 2013), 23-26 June 2013, Istanbul, Turkey. (pp. 1-5).

Mohd Noh, Zarina and Ramli, Abdul Rahman and Hanafi, Marsyita and Saripan, M. Iqbal (2013) Review on a palm vein infrared image acquisition system. In: 2013 IEEE Student Conference on Research and Development (SCOReD), 16-17 Dec. 2013, Putrajaya, Malaysia. (pp. 334-337).

Mohd Noor, Norul Uyuun and Abdul Karim, Hezerul and Mohd Arif, Nor Azhar and Sali, Aduwati (2013) Multiview plus depth video using high efficiency video coding method. In: 2013 IEEE International Conference on Signal and Image Processing Applications (ICSIPA), 8-10 Oct. 2013, Melaka, Malaysia. (pp. 209-213).

Mokhtar, Robiatul Adawiyah and Hussin, Faizah and Mohd Salleh, Mohamad Amran and Saliban, Hairulizam and Idris, Azni and Wan Ab. Karim Ghani, Wan Azlina and Razali, Siti Zulaika and Mat Nong, Mohd Ali (2013) Low cost proximate analysis of biomass for carbon production. In: Persidangan Kebangsaan Pertama Program Pemindahan Ilmu (KTP 01), 21-23 Ogos 2013, Equatorial Hotel, Bangi. (pp. 569-575).

Moshayedi, Ata Jahangir and Toudeshki, Arash Mohammadi and Gharpure, Dayamanti C. (2013) Mathematical modeling for SnO2 gas sensor based on second-order response. In: 2013 IEEE Symposium on Industrial Electronics & Applications (ISIEA2013), 22-25 Sept. 2013, Pullman Kuching Hotel, Kuching, Sarawak. (pp. 33-38).

Motlagh, Farid Esmaeili and Tang, Sai Hong and Motlagh, Omid Reza Esmaeili (2013) Optimal accuracy and runtime trade-off in wavelet based single-trial P300 detection. In: 2013 IEEE International Conference on Signal and Image Processing Applications (ICSIPA), 8-10 Oct. 2013, Melaka, Malaysia. (pp. 343-348).

Musarudin, Marianie and Saripan, M. Iqbal and Mashohor, Syamsiah and Mohd Saad, Wira Hidayat and Hashim, Suhairul and Nordin, Abdul Jalil (2013) Validation of a clinical PET scanner using Monte Carlo simulation code: MCNP5. In: 8th EUROSIM Congress on Modelling and Simulation (EUROSIM), 10-13 Sept. 2013, Cardiff, United Kingdom. (pp. 36-41).

Mwinyi, Amir Kombo and Syed Mohamed, Syed Abdul Rahman Al-Haddad and Hashim, Shaiful Jahari and Adnan, Ali Idarous and Abdullah, Rusli (2013) Interoperability of multi-agent system in heterogeneous learning management system (HLMS) by deploying wireless sensor networks (WSNS). In: 4th International Conference on Computing and Informatics (ICOCI 2013), 28-30 Aug. 2013, Sarawak, Malaysia. (pp. 165-172).

Nakhaeinia, Danial and Tang, Sai Hong and Payeur, Pierre (2013) Development of a sensor-based approach for local minima recovery in unknown environments. In: 2013 IEEE International Symposium on Robotic and Sensors Environments (ROSE), 21-23 Oct. 2013, Washington DC, USA. .

Nasimi, Meysam and Kousha, Mohammad and Hashim, Fazirulhisyam (2013) QoE-oriented cross-layer downlink scheduling for heterogeneous traffics in LTE networks. In: 2013 IEEE 11th Malaysia International Conference on Communications (MICC), 26-28 Nov. 2013, Kuala Lumpur, Malaysia. (pp. 292-297).

Nejad, Mohsen Fadaee and Saberian, Amin Mohammad and Hizam, Hashim and Mohd Radzi, Mohd Amran and Ab Kadir, Mohd Zainal Abidin (2013) Application of smart power grid in developing countries. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 427-431).

Nejad, Mohsen Fadaee and Shariati, Omid and Mohd Zin, Abdullah Asuhaimi (2013) Feasibility study of wave energy potential in southern coasts of Caspian Sea in Iran. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 57-60).

Nematollahi, Mohammad Ali and Syed Mohamed, Syed Abdul Rahman Al-Haddad and C. Doraisamy, Shyamala and Zarafshan, Faraneh and Ranjbari, M. (2013) Interacting video information via speech watermarking for mobile second screen in Android smartphone. In: 2013 IEEE Student Conference on Research and Development (SCOReD), 16-17 Dec. 2013, Putrajaya, Malaysia. (pp. 325-327).

Noura, Amin and Seyedzadeh, Saleh and Ahmad Anas, Siti Barirah (2013) Simultaneous vibration and humidity measurement using a hybrid WDM/OCDMA sensor network. In: 4th International Conference on Photonics (ICP2013), 28-30 Oct. 2013, Equatorial Hotel Melaka, Malaysia. (pp. 163-165).

Nourirad, Ghasem and Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin (2013) Corona losses: issues and solutions. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 405-410).

Omar, Muhammad Azhar and Hassan, Mohd Khair and Che Soh, Azura and Ab Kadir, Mohd Zainal Abidin (2013) Lightning severity classification utilizing the meteorological parameters: a neural network approach. In: 2013 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2013), 29 Nov.-1 Dec. 2013, Penang, Malaysia. (pp. 111-116).

Rabiu, Habibu and Saripan, M. Iqbal and Marhaban, Mohammad Hamiruce and Mashohor, Syamsiah (2013) 3D-based face segmentation using adaptive radius. In: 2013 IEEE International Conference on Signal and Image Processing Applications (ICSIPA), 8-10 Oct. 2013, Melaka, Malaysia. (pp. 237-240).

Rameli, Norhidayu and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Gomes, Chandima and Jasni, Jasronita (2013) Evaluation of lightning induced over-voltage due to variations of channel angle. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 184-187).

Ranjbari, Mohamadreza and Sali, Aduwati and Abdul Karim, Hezerul and Hashim, Fazirulhisyam (2013) Depth error concealment based on decision making. In: 2013 IEEE International Conference on Signal and Image Processing Applications (ICSIPA), 8-10 Oct. 2013, Melaka, Malaysia. (pp. 193-196).

Roshanravan, Bita and Mahdavi, Fariba and Abdul Rashid, Suraya (2013) Nitrogen release properties of urea–kaolinite controlled release fertilizer with chitosan binder. In: International Conference on Environmental Forensics 2013, 11-14 Nov. 2013, Marriot Hotel, Putrajaya, Malaysia. (pp. 23-27).

Saberian, Aminmohammad and Farzan, Payam and Nejad, Mohsen Fadaee and Hizam, Hashim and Gomes, Chandima and Othman, Mohammad Lutfi and Mohd Radzi, Mohd Amran and Ab Kadir, Mohd Zainal Abidin (2013) Role of FACTS devices in improving penetration of renewable energy. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 432-437).

Sabo, Aliyu and Abdul Wahab, Noor Izzri and Mohd Radzi, Mohd Amran and Mailah, Nashiren Farzilah (2013) A modified artificial neural network (ANN) algorithm to control shunt active power filter (SAPF) for current harmonics reduction. In: 2013 IEEE Conference on Clean Energy and Technology (CEAT), 18-20 Nov. 2013, Langkawi, Kedah, Malaysia. (pp. 348-352).

Sadrolhosseini, Amir Reza and Muhammad Noor, Ahmad Shukri and Mahdi, Mohd Adzir and Kharazmi, Alireza and Zakaria, Azmi and Mat Yunus, Wan Mahmood and Huang, Nay Ming (2013) Laser ablation synthesis of silver nanoparticle in graphene oxide and thermal effusivity of nanocomposite. In: 4th International Conference on Photonics (ICP2013), 28-30 Oct. 2013, Equatorial Hotel Melaka, Malaysia. (pp. 62-65).

Salah, Asem Ahmad Mohamad and Raja Abdullah, Raja Syamsul Azmir and Ismail, Alyani and Hashim, Fazirulhisyam and Leow, Chee Yen and Roslee, Mardeni and Abdul Rashid, Nur Emileen (2013) Feasibility study of LTE signal as a new illuminators of opportunity for passive radar applications. In: 2013 IEEE International RF and Microwave Conference (RFM2013), 9-11 Dec. 2013, Bayview Beach Resort Penang, Malaysia. (pp. 258-262).

Salih, Ahmad Abbas Al-Ameen and Ariff, Omar Kassim and Md Zhahir, Md Amzari and Ahmad, Mohamed Tarmizi (2013) Modeling and simulation of a high accurate aircraft ground-based positioning and landing system. In: 2013 IEEE International Conference on Space Science and Communication (IconSpace), 1-3 July 2013, Hotel Equatorial Melaka, Malaysia. (pp. 324-330).

Sardi, Junainah and Ab Kadir, Mohd Zainal Abidin (2013) Investigation on the effects of line parameters to the lightning performance of 132 kV Kuala Krai-Gua Musang transmission line. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 594-599).

Shabaneh, Arafat Abdallah Abdelwadod and M. Thirunavakkarasu, Punithavathi and Girei, Saad Hayatu and Paiman, Suriati and Mahdi, Mohd Adzir and Yaacob, Mohd Hanif and Huang, Nay Ming (2013) Reflectance response of optical fiber sensor coated with graphene oxide towards ethanol. In: 4th International Conference on Photonics (ICP2013), 28-30 Oct. 2013, Equatorial Hotel Melaka, Malaysia. (pp. 272-274).

Shahemabadi, Ali Rafiei and Mohd Noor, Samsul Bahari and Taip, Farah Saleena (2013) Analytical formulation of the integral square error for linear stable feedback control system. In: 2013 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2013), 29 Nov.-1 Dec. 2013, Penang, Malaysia. (pp. 157-161).

Shahemabadi, Ali Rafiei and Mohd Noor, Samsul Bahari and Taip, Farah Saleena and Bahraminejad, Behzad (2013) Gas type identification at constant concentration level by system identification technique. In: 2013 IEEE International Conference on Control System, Computing and Engineering, 29 Nov.-1 Dec. 2013, Penang, Malaysia. (pp. 148-151).

Shamsudin, Rosnah and Zainuddin, Muhammad Fakhri and Mohd Adzahan, Noranizan and Ramli, Noor Azwani (2013) Koye kacang powder forming machine. In: Persidangan Kebangsaan Pertama Program Pemindahan Ilmu (KTP 01), 21-23 Ogos 2013, Equatorial Hotel, Bangi. (pp. 226-230).

Shayestegan, Mohsen and Din, Abdul Sattar (2013) Fuzzy logic controller for robot navigation in an unknown environment. In: 2013 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2013), 29 Nov.-1 Dec. 2013, Penang, Malaysia. (pp. 69-73).

Siajam, Shamsul Izhar and Ismail, Mohd Halim Shah and Lee, Yuan Chuan (2013) Removal of boron and arsenic from petrochemical wastewater using zeolite as adsorbent. In: International Conference on Environmental Forensics 2013, 11-14 Nov. 2013, Marriot Hotel, Putrajaya, Malaysia. (pp. 439-443).

Siow, Chun Lim and Lee, Weng Choun and Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin (2013) Environmental effects on the performance of electrical grounding systems. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 330-333).

Soheilirad, Mohammadsoroush and Farzan, Payam and Othman, Mohammad Lutfi and Karami, K. and Hojabri, Mojgan (2013) PID controller adjustment for MA-LFC by using imperialist competitive algorithm. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO 2013), 3-4 June 2013, Langkawi, Kedah. (pp. 507-512).

Soheilirad, Mohammadsoroush and Hizam, Hashim and Farzan, Payam and Hojabri, Mojgan and Fallah, Seyedeh Narjes and Soheilirad, G. (2013) Wind farm reactive power optimization by using imperialist competitive algorithm. In: International Conference on Power, Energy and Control (ICPEC 2013), 6-8 Feb. 2013, Dindigul, Tamil Nadu, India. (pp. 393-398).

Soheilirad, Mohammadsoroush and Karami, K. and Othman, Mohammad Lutfi and Farzan, Payam and Fallah, Seyedeh Narjes (2013) PID controller adjustment for MA-LFC by using a hybrid genetic-tabu search algorithm. In: 2013 IEEE 3rd International Conference on System Engineering and Technology (ICSET 2013), 19-20 Aug. 2013, Faculty of Electrical Engineering, Universiti Teknologi Mara, Shah Alam. (pp. 197-202).

Solouk, Vahid and Taghizadeh, Hamid and Moghanjoughi, Ayyoub Akbari and Razm, S. K. (2013) Tracking moving targets in wireless sensor networks using extended diffusion strategies of distributed Kalman filter. In: 2013 IEEE 11th Malaysia International Conference on Communications (MICC), 26-28 Nov. 2013, Kuala Lumpur, Malaysia. (pp. 213-216).

Sulaiman, Abdul Hadi and Md. Yusoff, Nelidya and Hitam, Salasiah and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir (2013) Investigation of continuously adjustable extinction ratio in a multiwavelength SOA fiber laser based on intensity dependent transmission effect. In: 4th International Conference on Photonics (ICP2013), 28-30 Oct. 2013, Equatorial Hotel Melaka, Malaysia. (pp. 151-153).

Supeni, Eris Elianddy and Epaarachchi, Jayantha Ananda and Islam, Md Mainul and Lau, Kin Tak (2013) Development of artificial neural network model in predicting performance of the smart wind turbine blade. In: 3rd Malaysian Postgraduate Conference (MPC2013), 4-5 July 2013, Education Malaysia Australia (EMA), Sydney, New South Wales, Australia. (pp. 233-242).

Tajbakhsh, Mir Saman and Aghababa, Mohammad Pourmahmood and Solouk, Vahid and Moghanjoughi, Ayyoub Akbari (2013) Friend recommendation based on the Luscher color theory: Twitter use case. In: 2013 IEEE 11th Malaysia International Conference on Communications (MICC), 26-28 Nov. 2013, Kuala Lumpur, Malaysia. (pp. 217-221).

Tamjidyamcholo, Alireza and Gholipour, Rahmatollah and Baba, Mohd Sapiyan and Yamchello, Hamed Tamjid (2013) Information security professional perceptions of knowledge-sharing intention in virtual communities under social cognitive theory. In: 3rd International Conference on Research and Innovation in Information Systems – 2013 (ICRIIS'13), 27-28 Nov. 2013, Kuala Lumpur, Malaysia. (pp. 416-421).

Tamjidyamcholo, Alireza and Yamchello, Hamed Tamjid and Baba, Mohd Sapiyan and Gholipour, Rahmatollah (2013) Application of fuzzy set theory to evaluate the rate of aggregative risk in information security. In: 3rd International Conference on Research and Innovation in Information Systems – 2013 (ICRIIS'13), 27-28 Nov. 2013, Kuala Lumpur, Malaysia. (pp. 410-415).

Tan, Gim Heng and Mohd Sidek, Roslina and Mohd Isa, Maryam and Shafie, Suhaidi (2013) A low-power current bleeding mixer with improved LO-RF isolation for ZigBee application. In: 2013 IEEE International Conference on Circuits and Systems (ICCAS 2013), 18-19 Sept. 2013, Kuala Lumpur, Malaysia. (pp. 111-113).

Tashiro, Kunihisa and Wakiwaka, Hiroyuki and Mori, T. and Nakano, R. and Harun, Noor Hasmiza and Misron, Norhisam (2013) Design of liquid detection sensor with low-frequency electromagnetic field. In: 2013 Seventh International Conference on Sensing Technology (ICST), 3-5 Dec. 2013, Wellington, New Zealand. (pp. 578-581).

Tengku Abdul Hamid, Tengku Aizan and Ibrahim, Rahimah and Syed Abdul Rashid, Sharifah Norazizan and Mohd Yusuff, Rosnah and Mahmod, Ramlan and Abdullah, Rusli (2013) Empowerment of older person through ICT. In: Persidangan Kebangsaan Pertama Program Pemindahan Ilmu (KTP 01), 21-23 Ogos 2013, Equatorial Hotel, Bangi. (pp. 1048-1056).

Thian, Laah Lean and Al-Saegh, Ali Mohammed and Ramli, K. F. and Ibrahim, N. S. and Sali, Aduwati and Salman, Mustafa Ismael (2013) Energy-driven scheduling for Digital Video Broadcasting - Satellite Second Generation (DVB-S2). In: 2013 IEEE International Conference on Space Science and Communication (IconSpace), 1-3 July 2013, Hotel Equatorial Melaka, Malaysia. (pp. 385-390).

Thong, Peng Hoong and Che Soh, Azura and Jaafar, Haslina and Ishak, Asnor Juraiza (2013) Real-time monitoring system for parking space management services. In: 2013 IEEE Conference on Systems, Process & Control (ICSPC2013), 13-15 Dec. 2013, Kuala Lumpur, Malaysia. (pp. 149-153).

Togun, Hussein and Abdulrazzaq, Tuqa and Newaz, Kazi Md. Salim and Mohamad Badry, Ahmad Badarudin and Mohd Ariffin, Mohd Khairol Anuar (2013) A CFD study of turbulent heat transfer and fluid flow through the channel with semicircle rib. In: 2013 IEEE Conference on Clean Energy and Technology (CEAT), 18-20 Nov. 2013, Langkawi, Kedah, Malaysia. (pp. 312-316).

Torshizi, Seyed Dawood Sajjadi and Kwong, Kae Hsiang and Chieng, David and Ng, Seh Chun and Hashim, Fazirulhisyam (2013) Elastic fair rate allocation scheme for multi-radio wireless mesh networks. In: 2013 IEEE 24th Annual International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC 2013), 8-11 Sept. 2013, London, United Kingdom. (pp. 2695-2700).

Usman, Hamisu and Hizam, Hashim and Mohd Radzi, Mohd Amran (2013) Simulation of single-phase shunt active power filter with fuzzy logic controller for power quality improvement. In: 2013 IEEE Conference on Clean Energy and Technology (CEAT), 18-20 Nov. 2013, Langkawi, Kedah, Malaysia. (pp. 353-357).

Vaithilingam, Chockalingam Aravind and Tay, S. C. and Misron, Norhisam and Aris, Ishak and Jayakumar, J. (2013) Reduced mechanical oscillations using the MAGLEV concept in vertical axis wind turbine. In: 2013 International Conference on Renewable Energy and Sustainable Energy (ICRESE'13), 5-6 Dec. 2013, Karunya University, India. (pp. 248-252).

Wan Adnan, Wan Azizun and Yap, W. H. and Hashim, Shaiful Jahari and Syed Ahmad, Sharifah Mumtazah and Hanafi, Marsyita (2013) Road condition reporting: crowd sourcing on android smart phone. In: International Conference on Intelligence Information Processing, 1-3 Apr. 2013, Seoul, Korea. (pp. 323-327).

Wan Ismail, Wan Ishak and Mohd Kassim, Muhamad Saufi and Razali, Mohd. Hudzari (2013) Camera color vision for crop ripeness model. In: 2013 Society for Engineering in Agriculture Conference, 22-25 Sept. 2013, Perth, Australia. .

Wan Razali, Wan Aizuddin and Samsu Baharuddin, Azhari and Muhamad, Zambahari and Sulaiman, Alawi and Dzulkornain, Chairil Anuar and Omar, Farah Nadia and Mokhtar, Mohd Noriznan and Md. Shah, Umi Kalsom (2013) Production of compost from organic materials and agro waste. In: Persidangan Kebangsaan Pertama Program Pemindahan Ilmu (KTP 01), 21-23 Ogos 2013, Equatorial Hotel, Bangi. (pp. 555-568).

Yunusa, Zainab and Hamidon, Mohd Nizar and Abdul Rashid, Suraya (2013) Growth of multi-walled carbon nanotubes on platinum. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013), 25-27 Sept. 2013, Langkawi, Kedah, Malaysia. (pp. 363-366).

Zainal Abidin, Mohd Shahnan and Muhammad Noor, Ahmad Shukri and Mahdi, Mohd Adzir and Abdul Rashid, Suraya (2013) Frequency modulation optimization of nonlinear optical Z-scan by high repetition rate femtosecond laser. In: 4th International Conference on Photonics (ICP2013), 28-30 Oct. 2013, Equatorial Hotel Melaka, Malaysia. (pp. 90-92).

Zare, Mohsen R. and Misron, Norhisam and Aravind, C. V. and Raja Othman, Raja Nor Firdaus Kashfi and Aris, Ishak and Mariun, Norman and Wakiwaka, Hiroyuki (2013) Improvement on pull-in thrust to input power of HDTFLM using optimal chopping strategy. In: 10th IEEE International Conference on Power Electronics and Drive Systems (PEDS), 22-25 Apr. 2013, Kitakyushu, Japan. (pp. 1201-1206).

Zarrabi, Amirreza and Samsudin, Khairulmizam and Ziaei, Amin (2013) Dynamic process migration framework. In: 2013 International Conference of Information and Communication Technology (ICoICT), 20-22 Mar. 2013, Bandung, Indonesia. (pp. 410-415).

Zolkepali, Nurul Karimah and Abu Bakar, Noor Fitrah and Naim, Mohd Nazli and Anuar, Nornizar and Abu Bakar, Mohd Rushdi (2013) Nanoparticle preparation of mefenamic acid by electrospray drying. In: 5th Nanoscience and Nanotechnology Symposium (NNS 2013), 23-25 Oct. 2013, Surabaya, Indonesia. (pp. 113-118).

Patent

Mohd Fadlee A. Rasid (2013) A system and method for providing services in telemedicine application. PI2013701135.

Luqman Chuah Abdullah (2013) Composition comprising phaleria leaf extract having anti-cancer activity. PI2013701953.

Abd. Rahim Abu Talib (2013) Injection molding using a novel binder system based on palm oil derivatives. PI2013004110.

Desa Ahmad (2013) A tuber vegetation harvester. PI2013701939.

B. T. Hang Tuah Baharudin (2013) Portable constant load tensile-corrosion test system. PI2013701936.

Mohd Nizar Hamidon (2013) An artificial olfactory system and an application thereof. PI2013701159.

Azni Idris (2013) A method for treating domestic sludge and/or industrial sludge and/or waste biomass and an apparatus used to treat the domestic sludge and/or industrial sludge and/or waste biomass. PI2013003117.

Mohd Adzir Mahdi (2013) A broadly tunable multiple wavelength Brillouin-erbium fiber laser utilizing stimulated Brillouin scattering as a virtual mirror. UNSPECIFIED.

Norhisam Misron (2013) A permanent magnet motor with rotor flux barriers. PI2013001189.

Norhisam Misron (2013) Multi-rotor reluctance machine. PI2013001190.

Borhanuddin Mohd. Ali (2013) A method of peak to average power ration (PAPR). PI2013702570.

Rosnah Mohd Yusuff (2013) A pineapple processing machine. PI2013003493.

Raja Mohd Kamil Raja Ahmad (2013) Method and apparatus for nonlinear compensation in an active noise control system. PI2013701854.

Suhaidi Shafie (2013) Automatic dual axis solar tracking apparatus, system and method thereof. PI2013701144.

Suhaidi Shafie (2013) Apparatus and method for measuring flow rate of fluid. PI2013702167.

Rosnah Shamsudin (2013) A white pepper decorticator. PI2013001215.

Sharifah Mumtazah Syed Ahmad Abdul Rahman (2013) Method and system for steganography within handwritten signature images. PI2013700217.

Syed Abd. Rahman Al-Hadad Syed Mohamed (2013) A method for speech watermarking in speaker verification. PI 2013701280.

Tang Sai Hong (2013) Pneumatic powered manipulator. PI2013702050.

Wan Azizun Wan Adnan (2013) System and method for protecting digital documents and preventing unauthorized distribution of documents to third party. PI2013701895.

Aimrun Wayayok (2013) Single seedling nursery tray. PI2013700745.

Thesis

Abdul Habib, Nor Saiful Hafiz (2013) Production of synthetic based drilling fluid from palm oil. Masters thesis, Universiti Putra Malaysia.

Abdul Rahman, Rohana (2013) Alternative procedure of sales comparison method in valuing property. PhD thesis, Universiti Putra Malaysia.

Abdullah, Ahmad Baharuddin (2013) Geometrical and dimensional defect evaluation of cold forged AA6061 propeller blade. PhD thesis, Universiti Putra Malaysia.

Abhari, Farideh (2013) Distinctive analysis of fluid flow behavior of AC electroosmotic micropump. Masters thesis, Universiti Putra Malaysia.

Ahmad, Nur Syuhada (2013) Direct current heater-assisted triangular solar still for water production. Masters thesis, Universiti Putra Malaysia.

Ahmed, Bilal Abdulhaq (2013) Enhanced open shortest path first (OSPF) protocol using parallel tabu search - ring in wimax mesh network. Masters thesis, Universiti Putra Malaysia.

Ahmed, Rabah Abood (2013) Fault tolerance of L1 data cache memory induced by intrinsic parameters fluctuation in sub 10nm UTB-SOI MOSFETs. PhD thesis, Universiti Putra Malaysia.

Ahmed, Shakil (2013) Cryptographic protection of block-oriented storage devices using AES-XTS in FPGA. PhD thesis, Universiti Putra Malaysia.

Al-Dabbagh, Mohanad Dawood Hasan (2013) Optimized differential evolution algorithm for linear frequency modulation radar signal denoising. Masters thesis, Universiti Putra Malaysia.

Al-Doski, Jwan M. Mohammed (2013) Use of hybrid classification algorithm for land use and land cover analysis in data scarce environment. Masters thesis, Universiti Putra Malaysia.

Al-Ghaili, Abbas Mohammed Ali (2013) Cellular Automata-based Algorithm for Liquid Diffusion Phenomenon Modeling using imaging technique. PhD thesis, Universiti Putra Malaysia.

Al-Musawi, Muhmmed Hussain Riadh Abdul.S (2013) Improved mathematical model of fixed-bed infrared dryer process under different water flux expression. Masters thesis, Universiti Putra Malaysia.

Alfatni, Meftah Salem M. (2013) Real-time oil palm fruit bunch ripeness grading system using image processing techniques. PhD thesis, Universiti Putra Malaysia.

Alvan, Habibeh Valizadeh (2013) Detection of precursory signals of past earthquakes using integration of spatio-temporal parameters. PhD thesis, Universiti Putra Malaysia.

Aminuddin, Alina (2013) Thermal comfort analysis at Universiti Putra Malaysia Health Centre. Masters thesis, Universiti Putra Malaysia.

Amirkhani, Hadi (2013) Xylose production of oil palm frond using dilute acid hydrolysis. Masters thesis, Universiti Putra Malaysia.

Azimzadeh, Fatemeh (2013) Document ranking using information quality criteria in weblog search engine. PhD thesis, Universiti Putra Malaysia.

Bahmani, Sayed Hessam (2013) Properties of residual soil treated with silicon dioxide and cement. Masters thesis, Universiti Putra Malaysia.

Balbir Shah @ Mohd Faddullah, (2013) Comparative performance of on-off, pid and fuzzy logic controllers pH process in boiler application. Masters thesis, Universiti Putra Malaysia.

Bande, Yahaya Muhammad (2013) Malaysian grown egusi (Citrullus lanatus) crop as potential feed stock for bio-energy. PhD thesis, Universiti Putra Malaysia.

Barakat, Osamah Lutf Hamood (2013) Enhanced cuckoo malware analysis performance using cloud computing. Masters thesis, Universiti Putra Malaysia.

Bayat, Peyman (2013) New synchronization protocol for distributed system with TCP extension. PhD thesis, Universiti Putra Malaysia.

Bayesti, Iman (2013) Adsorption of carbon dioxide by activated carbon modified with mixture of cu/zn. Masters thesis, Universiti Putra Malaysia.

Cheong, Sin Soon (2013) Waste oil-based paint as additive in stone mastic asphalt. Masters thesis, Universiti Putra Malaysia.

Chockalingam Aravind Vaithilingam, (2013) Design and implementation of double rotor switched reluctance motor using magnetic circuit analysis. PhD thesis, Universiti Putra Malaysia.

Cionita, Tezara (2013) Evaluation of indoor air quality in selected daycare centre in Klang Valley, Malaysia using subjective and objective measurement. PhD thesis, Universiti Putra Malaysia.

Dahlan, Hadi Affendy (2013) Age classification using Hierarchical Support Vector Machine based on characteristics of upper facial area. Masters thesis, Universiti Putra Malaysia.

Dodangeh, Javad (2013) Development of an innovative neuro-fuzzy assessment system for the european foundation for quality management. PhD thesis, Universiti Putra Malaysia.

Ee, Gee Keng (2013) Path recovery for ad-hoc on-demamd distance 6lowpan routing protocol. PhD thesis, Universiti Putra Malaysia.

Esmaile, Maher Faik (2013) Thyroid volume estimation from ultrasound extend field of view images using star algorithm with green's theorem. PhD thesis, Universiti Putra Malaysia.

Falatoonitoosi, Elham (2013) Development of evaluation model to improve green supply chain management by applying DEMATEL technique. Masters thesis, Universiti Putra Malaysia.

Farahani, Hamid Barzabadi (2013) Synthesis and fabrication of nanocomposite magnesia doped barium strontium titanate for thick film humidity sensor. Masters thesis, Universiti Putra Malaysia.

Fatchurrohman, Nanang (2013) Manufacturing process and material selection using modified multi criteria decision making for brake disc. PhD thesis, Universiti Putra Malaysia.

Ghasab, Mohammad Ali Jan (2013) Plant leaf recognition algorithm using ant colony-based feature extraction technique. Masters thesis, Universiti Putra Malaysia.

Ghazanfarpour, Behzad (2013) Unified neural network controller of series active power filter for power quality problems mitigation. Masters thesis, Universiti Putra Malaysia.

Gires, Ezanee (2013) Experimental and simulated performance study of a small-scale gas turbine engine using Jet A-1 and palm oil biodiesel blends. Masters thesis, Universiti Putra Malaysia.

Golshan, Abolfazl (2013) Optimization of micro-end milling process parameters of titanium alloy using non-dominated sorting genetic algorithm. Masters thesis, Universiti Putra Malaysia.

Hadidi, Komeil (2013) Improvement of ear recognition rate using color scale invariant feature transform. Masters thesis, Universiti Putra Malaysia.

Hamzah, Abd Halim (2013) Implementation of spatial data infrastructure for information sharing towards spatially enabled land administration in Malaysia. PhD thesis, Universiti Putra Malaysia.

Hamzah, Muhammad Hazwan (2013) Optimization and kinetics of citronella oil extraction by ohmic heated hydro distillation. Masters thesis, Universiti Putra Malaysia.

Hasan, Norhasliza (2013) Use of bacterial cellulose produced by Acetobacter xylinum as binding agent in facial scrub formulation. Masters thesis, Universiti Putra Malaysia.

Herliati, (2013) Synthesis of epichlorohydrin from glycerol. PhD thesis, Universiti Putra Malaysia.

Hussain, Ghasan Ali (2013) Concatenated RS-convolutional codes for MIMO-OFDM over multipath fading channel. Masters thesis, Universiti Putra Malaysia.

Hussien, Mohamad Naeem (2013) Automatic estimation of noise to signal powerspectrum ratio in wiener filtering technique for computed tomography images. Masters thesis, Universiti Putra Malaysia.

Ibrahim, Abu Hatim (2013) Effects of flame-retardant agents on mechanical properties and flammability of impregnated sugar palm fibre-reinforced polymer composites. Masters thesis, Universiti Putra Malaysia.

Inai, Nor Hanifawati (2013) Mechanical and physical properties of hybrid banana pseudostem/glass fibre reinforced polyester composites. Masters thesis, Universiti Putra Malaysia.

Ishola, Tajudeen Abiodun (2013) Development of variable rate technology granular fertilizer applicator for oil palm plantations. Doctoral thesis, Universiti Putra Malaysia.

Jahanshiri, Ebrahim (2013) Comparison between specifications of linear regression and spatial-temporal autoregressive models in mass appraisal valuation for single storey residential property. Doctoral thesis, Universiti Putra Malaysia.

Jalal, Ali Sadeq Abdulhadi (2013) Minkowski fractal tag antennas integrated with split ring resonators and complementary split ring resonators for radio frequency identification applications. PhD thesis, Universiti Putra Malaysia.

Jusoh, Mohd Fauzie (2013) Evaluation of groundwater potential for irrigation at the Seberang Perak Aquifer, Malaysia. Masters thesis, Universiti Putra Malaysia.

Kabiri, Keivan (2013) Benthic habitat mapping and coral bleaching detection using quickbird imagery and Kd algorithm. PhD thesis, Universiti Putra Malaysia.

Kadhim, Altayyeb Abdullah (2013) Heat transfer and nanofluid flow characteristics in microchannel heat sink with different shapes. Masters thesis, Universiti Putra Malaysia.

Kaka, Majid Hayas (2013) Development of multi-service code family for spectral amplitude coding - optical code division multiple access systems. Masters thesis, Universiti Putra Malaysia.

Kakahy, Amer Najat Najmaldeen (2013) Design and development of rotary slasher (pulverizer) blades for sweet potato harvesting machine. PhD thesis, Universiti Putra Malaysia.

Kazaure, Abubakar Sani (2013) Flood simulation using shuttle radar topographic mission digital elevation model in Hadejia River Basin, Nigeria. Masters thesis, Universiti Putra Malaysia.

Kenari, Seyed Ali Jafari (2013) An optimized ensemble for predicting reservoir rock properties in petroleum industry. PhD thesis, Universiti Putra Malaysia.

Khaksar, Weria (2013) A hybrid sampling-based path planning algorithm for mobile robot navigation in unknown environments. PhD thesis, Universiti Putra Malaysia.

Kharazi, Seyedmohammadsaleh Seyedzadeh (2013) Performance analysis of variable weight Optical Code Division Multiple Access System. Masters thesis, Universiti Putra Malaysia.

Khosravi, Faranak (2013) Improvement of three-level code division multiplexing in optical fiber communication. Masters thesis, Universiti Putra Malaysia.

Kia, Masoud Bakhtyari (2013) Flood modelling using an integrated Artificial Neural Network and Neuro-Fuzzy technique for Johor River Basin, Malaysia. PhD thesis, Universiti Putra Malaysia.

Koay, Yin Shin (2013) Adsorption of reactive dyes from aqueous solutions by quaternized palm kernel shell. Masters thesis, Universiti Putra Malaysia.

Koohikamali, Sara (2013) Production and characterization of hydrophilic conjugated linoleic acid with improved oxidative stability using sunflower oil. PhD thesis, Universiti Putra Malaysia.

Lai, Yin Ling (2013) Simulation of single and dual layered rapid pressure swing adsorption. PhD thesis, Universiti Putra Malaysia.

Liaghat, Shohreh (2013) Assessment of near-infrared and mid-infrared spectroscopy for early detection of basal stem rot disease in oil palm plantation. Doctoral thesis, Universiti Putra Malaysia.

Lioe, De Xing (2013) Low power modulator for capsule endoscope. Masters thesis, Universiti Putra Malaysia.

Madehi, Norhafiza (2013) Jatropha curcas L. as potential bio-coagulant for wastewater treatment. Masters thesis, Universiti Putra Malaysia.

Mansoor, Muhammad (2013) Theory of inventive problem solving based sector specific guidance for electrical engineers to seek innovative solutions systematically. Doctoral thesis, Universiti Putra Malaysia.

Marahel, Ehsan (2013) Adsorption of carbon dioxide on ammonia-treated carbon coated monolith. Masters thesis, Universiti Putra Malaysia.

Marzook, Ali Kamil (2013) Reduced rank technique for joint channel estimation and joint data detection in TD-SCDMA systems. PhD thesis, Universiti Putra Malaysia.

Mattar, Zainal Abidin Shah (2013) Welding parameter optimization using Taguchi method and Grey Relational Analysis for Gas Metal Arc Welding A1008 butt-joint. Masters thesis, Universiti Putra Malaysia.

Mazloomi, Seyedkaveh (2013) Enhancement of efficiency of water electrolysis for hydrogen production. Masters thesis, Universiti Putra Malaysia.

Md Ali, Abd Halim (2013) Selective metal recovery from printed circuit board wastewater. Masters thesis, Universiti Putra Malaysia.

Md. Aziz, Shazed (2013) Experimental and theoretical evaluation of the tensile properties of carbon nanotube-coated carbon fibre hybrid composites. Masters thesis, Universiti Putra Malaysia.

Md. Yusoff, Nelidya (2013) Enhanced structure for discrete and remote L-band erbium-doped fiber amplifiers. PhD thesis, Universiti Putra Malaysia.

Mgt Ahmad, Puteri Farah Wahida (2013) Drying characteristics of piper betle linn leaves using vacuum and heat pumps drying methods. Masters thesis, Universiti Putra Malaysia.

Moayedfar, Majid (2013) Tool design and parameter optimization for incremental sheet-forming process. Masters thesis, Universiti Putra Malaysia.

Moazami, Ehsan (2013) Multi-objective service restoration in distribution networks using genetic algorithm. Masters thesis, Universiti Putra Malaysia.

Mohamad, Ahmad Syukri (2013) Development of A 115V, 400HZ cascaded 41-level inverter. Masters thesis, Universiti Putra Malaysia.

Mohd Hamami, Mohd Ghazali (2013) Development of behavior-based reactive navigation system for mobile robot. Masters thesis, Universiti Putra Malaysia.

Mohd Pauzi, Nur Irfah (2013) Characterization of dumping soil and settlement prediction using Monte Carlo approach. PhD thesis, Universiti Putra Malaysia.

Mohd Salleh, Salwani (2013) Computational crashworthy optimization of partially filled aluminium foam for automotive side member. PhD thesis, Universiti Putra Malaysia.

Mohd Zainuri, Muhammad Ammirrul Atiqi (2013) Protovoltaic boost DC/DC converter with adaptive perturb and observe-fuzzy maximum power point tracking algorithm. Masters thesis, Universiti Putra Malaysia.

Mubarak, Mohammed Awadh Ahmed Ben (2013) Prediction and multi-criteria-based schemes for seamless handover mechanism in mobile WiMAX networks. PhD thesis, Universiti Putra Malaysia.

Nejad, Mohsen Fadaee (2013) Multi-objective optimization of stand-alone hybrid renewable energy system by genetic algorithm. Masters thesis, Universiti Putra Malaysia.

Ng, Hui Suan (2013) Application of aqueous two-phase systems in the recovery of cyclodextrin glycosyltransferase and cyclodextrins. PhD thesis, Universiti Putra Malaysia.

Ng, Kian Theng (2013) Novel detection soft-computing algorithm for structural health monitoring system. Masters thesis, Universiti Putra Malaysia.

Ng, Seng Shin (2013) Reduction of total harmonic reduction in torque characteristics in two-phase side by side brushless DC motor. Masters thesis, Universiti Putra Malaysia.

Noor Shah, Mohd Syahril (2013) Dual-sampling sigma-delta analog-to-digital converter implementation in field-programmable gate array. Masters thesis, Universiti Putra Malaysia.

Noorvand, Hassan (2013) Effects of nano TiO2 on properties of rice husk ash mortars. Masters thesis, Universiti Putra Malaysia.

Noorvand, Hossein (2013) Physical and chemical properties of unground palm oil fuel ash mortars incorporating Nano-SiO2. Masters thesis, Universiti Putra Malaysia.

Nosrati, Shohreh (2013) Preparation and characterization of nano crystalline structures on CK60 steel by drilling method. Masters thesis, Universiti Putra Malaysia.

Nourqolipour, Ramin (2013) Multi-objective based Cellular Automata-Markov chain modeling for landuse change analysis in Kuala, Langat, Malaysia. PhD thesis, Universiti Putra Malaysia.

Omar Baki, Sharudin (2013) Physical characterization and optical spectroscopy of Er3/Yb3-doped multicomposition tellurite glass for broadband amplifiers. Doctoral thesis, Universiti Putra Malaysia.

Qadawi, Zahraa D.A. (2013) Efficient back-off mechanism for IEEE 802.15.4 wireless sensor networks. Masters thesis, Universiti Putra Malaysia.

Rabiu, Habibu (2013) 3D-based multi-ethnic facial expression database and recognition system. PhD thesis, Universiti Putra Malaysia.

Radin Umar, Radin Za'im (2013) Numerical analysis of a system of wireless energy transfer via resonance of magnetic induction. Masters thesis, Universiti Putra Malaysia.

Radzuan, Mohd Nazren (2013) Moisture content of kenaf (hibiscus cannabinus l.) stem based on microwave dielectric properties. Masters thesis, Universiti Putra Malaysia.

Rafieishahemabadi, Ali (2013) Harmony search-based robust optimal controller with prior defined structure. Doctoral thesis, Universiti Putra Malaysia.

Raheleh, Sonee Shargh (2013) Multiwavelength Brillouin-Raman fiber laser assisted by Rayleigh scattering. Doctoral thesis, Universiti Putra Malaysia.

Raja Othman, Raja Nor Firdaus Kashfi (2013) Design of a high fundamental torque single phase double stator brushless DC motor. PhD thesis, Universiti Putra Malaysia.

Rameli, Norhidayu (2013) Lightning-induced voltage on distribution line due to inclined lightning channel. Masters thesis, Universiti Putra Malaysia.

Ramli, Muhamad Roddy (2013) Fractionation of palm kernel oil by short path distillation. Masters thesis, Universiti Putra Malaysia.

Randjbaran, Elias (2013) Effect of layer stacking sequence on residual compressive strength for hybrid composite plates. Masters thesis, Universiti Putra Malaysia.

Rebitanim, Nur Zalikha (2013) Carbon dioxide adsorption on biochars produced at different temperatures. Masters thesis, Universiti Putra Malaysia.

Saeed, Osama Mohamed Ben (2013) Near-infrared technique for oil palm fruit grading system. PhD thesis, Universiti Putra Malaysia.

Salih, Ahmad Abbas Al-Ameen (2013) A novel high-precision ground-based aircraft landing system capitalizing on towers trilateration. Masters thesis, Universiti Putra Malaysia.

Sanyang, Lamin (2013) Hydrogel-biochar composite for sorption of arsenic and zinc from aqueous media. Masters thesis, Universiti Putra Malaysia.

Sargolzaey, Hadi (2013) A reliable unicast routing protocol for mobile ad hoc network. PhD thesis, Universiti Putra Malaysia.

Seyyedoshohadaei, Seyyed Masoud (2013) Optimized scheme for fast mobile IPV6 handover and mobility in IEEE 802.16 network. PhD thesis, Universiti Putra Malaysia.

Shafad, Mohd Raside (2013) Extraction of dragon fruit (hylocereus polyrhizus) foliage active compound for water treatment. Masters thesis, Universiti Putra Malaysia.

Shahrir, Nurhaiza (2013) Development and verification of predictive maintenance system in a solar cell manufacturing industry. Masters thesis, Universiti Putra Malaysia.

Shamsudin, Saleha (2013) Steam pretreatment to improve enzymatic saccharification of oil palm Elaeis guineensis empty fruit bunch. PhD thesis, Universiti Putra Malaysia.

Shayestegan, Mohsen (2013) Fuzzy logic controller for robot navigation in environment with obstacles and dead-end traps. Masters thesis, Universiti Putra Malaysia.

Shojanazeri, Hamid (2013) Image authentication using Zernike moment watermarking. Masters thesis, Universiti Putra Malaysia.

Shoorangiz, Mohammadreza (2013) Adaptive complex neuro-fuzzy inference system for non linear modeling and time series prediction. Masters thesis, Universiti Putra Malaysia.

Subramaniam, Menaga (2013) Effects of signal peptides on secretion of the bacillus g1 β-cyclodextrin glucanotransferase in lactococcus lactis NZ9000. Masters thesis, Universiti Putra Malaysia.

Taghvaee, Mohammad Hossein (2013) Fuzzy logic-based hill climbing technique for photovoltaic maximum power point tracking converter. Masters thesis, Universiti Putra Malaysia.

Tanha, Maryam (2013) An intrusion tolerant system architecture for secure and self-healing smart grid control centers. Masters thesis, Universiti Putra Malaysia.

Thai, Seng Choong (2013) Monitoring cathodic protection system for underground pipeline. Masters thesis, Universiti Putra Malaysia.

Torshizi, Seyed Dawood Sajjadi (2013) An adaptive rate allocation system to mitigate fairness issues in Wi-Fi mesh networks. Masters thesis, Universiti Putra Malaysia.

Toudeshki, Arash Mohammadi (2013) Improved charge pump for capacitor discharge applications. Doctoral thesis, Universiti Putra Malaysia.

Usman, Hamisu (2013) Suppression of total harmonic distortion using single-phase shunt active power filter with fuzzy logic controller. Masters thesis, Universiti Putra Malaysia.

Vahabzadeh, Ali Haji (2013) A multistage decision-making model for green reverse logistics. Masters thesis, Universiti Putra Malaysia.

Wan Musa, Wan Mohd Nur Muzaaliff (2013) Seamless semantic service provisioning mechanism for ambient assisted living. Doctoral thesis, Universiti Putra Malaysia.

Yeo, Kwok Shien (2013) Nonlinear fiber optical parametric amplifiers and lasers with idler removal filter. Doctoral thesis, Universiti Putra Malaysia.

You, Sin Yong (2013) Channel-and delay - aware scheduling algorithms for wimax. Masters thesis, Universiti Putra Malaysia.

You, Sin Yong (2013) Channel-and delay-aware scheduling algorithms for wimax. Masters thesis, Universiti Putra Malaysia.

Yusoff, Abdul Hafiez (2013) Experimental derivation of stiffness matrix of sheet metal joint. Masters thesis, Universiti Putra Malaysia.

Yusuf, Muhammad (2013) Cutting parameter optimisation for aluminium LM6 composite using experimental design. PhD thesis, Universiti Putra Malaysia.

Zahari @ Annuar, Ahsan Nur Mubarak (2013) Measurement of different obstacles effect on rectangular cavity in low Reynolds number flow field using particle image velocimetry. Masters thesis, Universiti Putra Malaysia.

Zakaria, Nor Azura (2013) Multiple and solid data background scheme for testing static single cell faults on SRAM memories. Masters thesis, Universiti Putra Malaysia.

Zohdi, Nima (2013) Adsorption of boron using modified multiwalled carbon nanotubes. Masters thesis, Universiti Putra Malaysia.

Zubairu, Usman Bashar (2013) Development of single seedling nursery tray for the System of Rice Intensification. Masters thesis, Universiti Putra Malaysia.

This list was generated on Mon Nov 25 03:18:13 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0