Items where Division is "Faculty of Engineering" and Year is 2011

Group by: Creators | Item Type | No Grouping

Number of items: 883.

Article

A. Rasid, Zainudin and Zahari, Rizal and Ayob, Amran and Abang Abdul Majid, Dayang Laila and Mohd Rafie, Azmin Shakrine (2011) Thermal post-buckling improvements of laminated composite plates using the active strain energy tuning approach. Advanced Materials Research, 311-313. pp. 2235-2238. ISSN 1022-6680; ESSN: 1662-8985

A. Talib, Rosnita and Abdan, Khalina and Mohamed Amin Tawakkal, Intan Syafinaz (2011) The influence of mercerised kenaf fibres reinforced polylactic acid composites on dynamic mechanical analysis. Key Engineering Materials, 471-472 (2). pp. 815-820. ISSN 1013-9826

Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Wan Ahmad, Wan Fatinhamamah and Izadi, Mahdi (2011) Numerical expressions in time domain for electromagnetic fields due to lightning channels. International Journal of Applied Electromagnetics and Mechanics, 37 (4). pp. 275-289. ISSN 1383-5416

Ab Rahman, Md Fakarudin and Saripan, M. Iqbal and Mohamad Hasan, Nor Pa'iza and Mustapha, Ismail (2011) Mass attenuation coefficients, effective atomic and electron numbers of stainless steel and carbon steels with different energies. Jurnal Sains Nuklear Malaysia, 23 (2). pp. 19-25. ISSN 2232-0946

Ab. Aziz, Norashikin and Anuar, Mohd Shamsul and Yusof, Yus Aniza and Taip, Farah Saleena and Sin, Tung Yeow and Shahar, Asnawi (2011) The influence of operational parameters and feed preparation in a convective batchribbon powder mixer. Drug Design, Development and Therapy, 5. pp. 465-469. ISSN 1177-8881

Abadi, Mohammad Hadi Nezhad Shahrokh and Hamidon, Mohd Nizar and Shaari, Abdul Halim and Abdullah, Norhafizah and Wagiran, Rahman (2011) SnO2/Pt thin film laser ablated gas sensor array. Sensors, 11 (8). pp. 7724-7735. ISSN 1424-8220

Abang Abdul Majid, Dayang Laila and Ahmad, Zuraida and Anuar, Hazleen and Halim, Zahurin and Md Yusof, Fauziah (2011) Cotton reinforced biopolymer matrix composite: Effect of ultraviolet on its mechanical properties. Key Engineering Materials, 471-47 (March). pp. 928-932. ISSN 1662-9795

Abang Abdul Majid, Dayang Laila and Basri, Shahnor and Varatharajoo, Renuganth and Attaran, Abdolhamid (2011) Flutter analysis of a hybrid plate-like fiber-reinforced composite wing. Key Engineering Materials, 471-472. pp. 1107-1112. ISSN 1013-9826; ESSN: 1662-9795

Abang Ali, Abang Abdullah and Jaafar, Mohd Saleh and Al-Gorafi, Mohammed A. and Othman, Ismail and Anwar, Mohammed Parvez (2011) Externally prestressed monolithic and segmental concrete beams under torsion: A comparative finite element study. IOP Conference Series: Materials Science and Engineering, 17 (1). 012041. ISSN 1757-8981

Abd Rahman, Mohd Firdaus and Zainudin, Edi Syams (2011) Properties of kenaf filled unplasticized polyvinyl chloride composites. Key Engineering Materials, 471-72. pp. 507-512. ISSN 1013-9826; ESSN: 1662-9795

Abd Rahman, Nur 'Aliaa and Mustapa Kamal, Siti Mazlina and Taip, Farah Saleena (2011) Effects of commercial pectinases application on selected properties of red pitaya juice. Journal of Food Process Engineering, 34 (5). pp. 1523-1534. ISSN 0145-8876; ESSN:1745-4530

Abd Rahman, Z. and Hitam, Salasiah and Al-Mansoori, M. H. and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir (2011) Multiwavelength Brillouin fiber laser with enhanced reverse-S-shaped feedback coupling assisted by out-of-cavity optical amplifier. Optics Express, 19 (22). pp. 21238-21245. ISSN 1094-4087; ESSN:1094-4087

Abd. Rahman, Mohamed and Salit, Mohd Sapuan and Abdan, Khalina (2011) Effects of process parameters on selected properties of liquid compression-molded vinyl ester sheets. Pertanika Journal of Science & Technology, 19 (1). pp. 147-152. ISSN 0128-7680; ESSN: 2231-8526

Abd. Wafti, Nur Sulihatimarsyila and Cheah, Kien Yoo and Siew, Wai Lin and Choong, Thomas Shean Yaw and Abdullah, Luqman Chuah (2011) Deoiling efficiency for oil extraction from spent bleaching clay and the quality of recovered oil. Journal of Oil Palm Research, 23 (Apr.). pp. 1005-1010. ISSN 1511-2780

Abd. Wafti, Nur Sulihatimarsyila and Cheah, Kien Yoo and Siew, Wai Lin and Choong, Thomas Shean Yaw and Abdullah, Luqman Chuah (2011) Regeneration and characterization of spent bleaching clay. Journal of Oil Palm Research, 23 (Apr.). pp. 999-1004. ISSN 1511-2780

Abdan, Khalina and Zainudin, Edi Syams and Abdul Rahman, Mohd Faizal and Harun, Jalaluddin and Abdul Hanan, Umar and W. N., W. N. Syuhada (2011) Development of biocomposite wall cladding from kenaf fibre by extrusion molding process. Key Engineering Materials, 471-472. pp. 239-244. ISSN 1013-9826; ESSN: 1662-9795

Abdan, Khalina and Zainudin, Edi Syams and Aji, Isuwa Suleiman (2011) Rheological behaviour of polypropylene/kenaf fibre composite: effect of fibre size. Key Engineering Materials, 471-472. pp. 513-517. ISSN 1013-9826; ESSN: 1662-9795

Abdolshah, Mohammad and Mohd Yusuff, Rosnah and Tang, Sai Hong and Ismail, Md. Yusof (2011) Loss-based process capability indices: a review. International Journal of Productivity and Quality Management, 7 (1). pp. 1-21. ISSN 1746-6474; ESSN: 1746-6482

Abdolshah, Mohammad and Mohd Yusuff, Rosnah and Tang, Sai Hong and Ismail, Md. Yusof and Sadigh, Aghdas Naimi (2011) Measuring process capability index Cpmk with fuzzy data and compare it with other fuzzy process capability indices. Expert Systems with Applications, 38 (6). pp. 6452-6457. ISSN 0957-4174; ESSN: 1873-6793

Abdul Aziz, Nuraini and Mohd Ihsan, Ahmad Kamal Ariffin (2011) Vibration and acoustic pre-assessment study for free piston engine structure. International Journal of Applied Science and Technology, 1 (5). pp. 177-185. ISSN 2221-0997; ESSN: 2221-1004

Abdul Halin, Izhal and Aris, Ishak and Isa, Maryam and Shafie, Suhaidi and Kawahito, Shoji and Ud Din, Amad (2011) Selection of amplifier for optimized charge transfer in active pixel CMOS time of flight (TOF) image sensors. IEICE Electronics Express, 8 (22). pp. 1913-1999. ISSN 1349-2543

Abdul Jalil, Nawal Aswan and Abu Talib, Abd. Rahim and Hussein, Alaa Raad (2011) Improvement of Mechanical Welding Properties by using Induced Harmonic Vibration. Journal of Applied Sciences, 11 (2). pp. 348-353. ISSN 1812-5654

Abdul Kadir, Amirruddin and Salit, Mohd Sapuan and Jaafar, Abdul Aziz (2011) Development of a hovercraft prototype with an aluminium hull base. International Journal of Physical Sciences, 6 (17). art. no. BAB0D1E26541. pp. 4185-4194. ISSN 1992-1950

Abdul Rashid, Suraya and Mohd Salleh, Mohamad Amran and Abd. Aziz, Farah Nora Aznieta and Naji Givi, Alireza (2011) The effects of lime solution on the properties of SiO2 nanoparticles binary blended concrete. Composites Part B: Engineering, 42 (3). pp. 562-569. ISSN 1359-8368

Abdul Rashid, Suraya and Othman, Siti Hajar and Abdullah, Norhafizah and Mohd Ghazi, Tinia Idaty (2011) Fe-doped TiO2 Nanoparticles Produced via MOCVD: Synthesis, Characterization, and Photocatalytic Activity. Journal of Nanomaterials, 2011. art. no. 571601. pp. 1-8. ISSN 1687-4110

Abdul Samad, Mohd Syazwan and Ali, Aidy and Mohd Ariffin, Mohd Khairol Anuar (2011) Life prediction of rubber automotive components using finite element method. Key Engineering Materials, 462-463. pp. 535-540. ISSN 1013-9826; ESSN: 1662-9795

Abdul Samad, Mohd Syazwan and Ali, Aidy and Sidhu, Rajdave Singh (2011) Durability of automotive jounce bumper. Materials and Design, 32 (2). pp. 1001-1005. ISSN 0261-3069

Abdul Wahab, Noor Izzri and Mohamed, Azah and Hussain, Aini (2011) Fast transient stability assessment of large power system using probabilistic neural network with feature reduction techniques. Expert Systems with Applications, 38 (9). pp. 11112-11119. ISSN 0957-4174; ESSN: 1873-6793

Abdullah, Abdul Ghani Liew (2011) Optimization of headspace sampling using solid–phase microextraction (SPME) for volatile components in starfruit juice. Journal of Industrial Research & Technology, 1 (1). pp. 32-39. ISSN 2229-9467

Abdullah, Abdul Hakim and Abdan, Khalina and Ali, Aidy (2011) Effects of fiber volume fraction on unidirectional kenaf/epoxy composites: the transition region. Polymer-Plastics Technology and Engineering, 50 (13). pp. 1362-1366. ISSN 0360-2559; ESSN: 1525-6111

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin and Tandur, Khaleed Hussain and Abdul Aziz, Nuraini (2011) Quantitative evaluation of geometric and dimensional error of cold forged AUV propeller blade. Australian Journal of Basic and Applied Sciences, 5 (9). pp. 1756-1764. ISSN 1991-8178

Abdullah, Azhar and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Vijayaram, Thoguluva Raghavan (2011) Effect of moisture content on the permeability of tailing sand samples gathered from ex tin mines in Perak state Malaysia. Applied Mechanics and Materials, 66-68. pp. 1384-1389. ISSN 1660-9336; ESSN: 1662-7482

Abdullah, Azhar and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Vijayaram, Thoguluva Raghavan (2011) The effect of bentonite clay on green compression strength for tailing sands from old tin mines in Perak state, Malaysia for making green sand casting mould. Key Engineering Materials, 471-472. pp. 769-774. ISSN 1013-9826; ESSN: 1662-9795

Abdullah, Luqman Chuah and Mirjalili, Fatemeh and Mohamad, Hasmaliza (2011) Preparation of Nano-Scale a-Al2O3 Powder by the Sol-Gel Method. Ceramics-Silikáty, 55 (4). pp. 378-383. ISSN 0862-5468

Abdullah, Zul Hilmi and Udzir, Nur Izura and Mahmod, Ramlan and Samsudin, Khairulmizam (2011) Towards a dynamic file integrity monitor through a security classification. International Journal of New Computer Architectures and Their Applications, 1 (3). pp. 766-779. ISSN 2412-3587; ESSN: 2220-9085

Abkar, Mahdieh and Mohd Shariff, Mustafa Kamal and Maulan, Suhardi and Davoodi, Seyed Rasoul (2011) Determining the visual preference of urban landscapes. Scientific Research and Essays, 6 (9). art. no. F72051D21564. pp. 1991-1997. ISSN 1992-2248

Abkar, Mahdieh and Mohd Shariff, Mustafa Kamal and Maulan, Suhardi and Mariapan, Manohar and Davoodi, Seyed Rasoul (2011) Relationship between the preference and perceived restorative potential of urban landscapes. Horttechnology, 21 (5 ). pp. 514-519. ISSN 1063-0198

Abu Bakar, M. H. and Abas, Ahmad Fauzi and Mokhtar, Makhfudzah and Mohamad, H. and Mahdi, Mohd Adzir (2011) Utilization of stimulated Raman Scattering as secondary pump on hybrid remotely-pump L-band Raman/erbium-doped fiber amplifier. Laser Physics, 21 (4). pp. 722-728. ISSN 1054-660X

Abu Bakar, Muhammad Hafiz and Sheih, Shou-Jong and Mahamd Adikan, Faisal Rafiq and Mahdi, Mohd Adzir (2011) Variable gain-flattened L-band Erbium-doped fiber amplifier. Laser Physics, 21 (9). pp. 1638-1644. ISSN 1054-660X

Abu Talib, Abd. Rahim and Abbud, Luay Hashem and Ali, Aidy and Mustapha, Faizal (2011) Mechanical properties of interlaminer Kevlar29 and Al2O3 powder/epoxy composite plates using an analytical approach. Scientific Research and Essays, 6 (21). art. no. 5B9B4FA38698. pp. 4455-4463. ISSN 1992-2248

Abubakar, Mohammed Shu'aibu and Ahmad, Desa and Othman, Jamarei and Sulaiman, Shamsuddin and Misron, Norhisam (2011) Evaluation of a dual-purpose chemical applicator for paddy fields. American Journal of Applied Sciences, 8 (4). pp. 362-367. ISSN 1546-9239; ESSN: 1554-3641

Adam, Nor Mariah and Hosseini, Shahla and K., Goudarzi (2011) Efect of temperature increasing on Nanofluid structure. Australian Journal of Basic and Applied Sciences, 5 (9). pp. 979-984. ISSN 1991-8178

Adam, Nor Mariah and Qi, Jie Kwong (2011) Perception of thermal comfort in the enclosed transitional space of tropical buildings. Indoor and Built Environment, 20 (5). pp. 524-533. ISSN 1420-326X

Affandi, Nuraishah Bazilah and Mohd. Rafie, Azmin Shakrine and Basri, Shahnor and Romli, Fairuz Izzudin and Abang Abdul Majid, Dayang Laila and Mustapha, Faizal (2011) A preliminary study on translational kinetic energy absorption using coconut-fiber (Coir) sheets as a potential impact-worthy constituent in advanced aerospace material. Key Engineering Materials, 471-472. pp. 1028-1033. ISSN 1013-9826; ESSN: 1662-9795

Afshar, Reza and Ali, Aidy and Sahari, Barkawi and Bayat, Mehdi (2011) Axial crush of the tubular structure with various cee-shaped cross-sections. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012039. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Ahamad, Intan Salwani and Choong, Thomas Shean Yaw and Yunus, Robiah and Chuah, Teong Guan and Vassiliadis, Vassilis S. (2011) Dynamic optimization for controller tuning with embedded safety and response quality measures. Pertanika Journal of Science & Technology, 19 (2). pp. 397-414. ISSN 0128-7680; ESSN: 2231-8526

Ahmad, A. A. and Idris, Azni and Khalid Mahmoud, Dalia (2011) Equilibrium modeling, kinetic and thermodynamic studies on the adsorption of basic dye by low-cost adsorbent. Journal of Advanced Science and Engineering Research, 1. pp. 261-277. ISSN 2231-8844

Ahmad, Desa and Sulaiman, Shamsuddin and Bola, Fashina Adepoju and Akande, Fatai Bukola (2011) Development of a tractor-pulled motion resistance test rig for traction studies on towed narrow wheels. International Journal of Agricultural and Biological Engineering, 4 (4). pp. 21-27. ISSN 1934-6344; ESSN: 1934-6352

Ahmad, Desa and Wayayok, Aimrun and Shamsabadi, Hossein (2011) Yield and yield components of sweet corn (Zea Mays L) grown under different tillage methods. Journal of Agricultural Machinery Science, 7 (3). pp. 259-264. ISSN 1306-0007

Ahmad, Mohd Najib and Mokhtar, Mohd Noriznan and Samsu Baharuddin, Azhari and Lim, Siong Hock and Ahmad Ali, Siti Ramlah and Abd. Aziz, Suraini and Abdul Rahman, Nor'aini and Hassan, Mohd Ali (2011) Changes in physicochemical and microbial community during co-composting of oil palm frond with palm oil mill effluent anaerobic sludge. BioResources, 6 (4). pp. 4762-4780. ISSN 1930-2126

Ahmad, Salsabila and Ab Kadir, Mohd Zainal Abidin and Shafie, Suhaidi (2011) Current perspective of the renewable energy development in Malaysia. Renewable and Sustainable Energy Reviews, 15 (2). pp. 897-904. ISSN 1364-0321; ESSN: 1879-0690

Ahmad, Siti Anom and Ishak, Asnor Juraiza and Md Ali, Sawal Hamid and Chappell, Paul H. (2011) Review of electromyography control systems based on pattern recognition for prosthesis control application. Australian Journal of Basic and Applied Sciences, 5 (8). pp. 1512-1518. ISSN 1991-8178

Ahmad @ Ayob, Mansor and Gharayebi, Yadollah and Salit, Mohd Sapuan and Hussein, Mohd Zobir and Shameli, Kamyar (2011) Comparison of in-situ polymerization and Solution-Dispersion Techniques in the preparation of polyimide/montmorillonite (MMT) nanocomposites. International Journal of Molecular Sciences, 12 (9). pp. 6040-6050. ISSN 1422-0067

Ahmad Zawawi, Nor'aini and Ismail, Alyani and Abdan, Khalina and Mahdi, Mohd Adzir (2011) Investigation on the microwave properties of kenaf and rice-husk fiber reinforced pla composite utilizing one-port coaxial transmission line reflection method. Key Engineering Materials, 471-472. pp. 868-873. ISSN 1013-9826; ESSN: 1662-9795

Ahmadun, Fakhru'l-Razi and Abdullah, Luqman Chuah and Awang Biak, Dayang Radiah and Zainal Abidin, Zurina and Pendashteh, Ali Reza and Madaenic, Sayed Siavash (2011) Membrane foulants characterization in a membrane bioreactor (MBR) treating hypersaline oily wastewater. Chemical Engineering Journal, 168 (1). pp. 140-150. ISSN 1385-8947

Ahmedov, Anvarjon (2011) The estimations for maximal operators. Applied Mathematics Letters, 24 (1). pp. 615-619. ISSN 0893-9659

Ahmedov, Anvarjon and Ab. Aziz, Norashikin and Mokhtar, Mohd Noriznan (2011) On convergence almost everywhere of multiple Fourier integrals. Journal of Quality Measurement and Analysis, 7 (1). pp. 109-115. ISSN 1823-5670

Ahmedov, Anvarjon and Ashurov, Ravshan (2011) On the divergence of spectral expansions of elliptic differential operators. Malaysian Journal of Mathematical Sciences, 5 (2). pp. 185-196. ISSN 1823-8343

Ahmedov, Anvarjon and Rakhimov, Abdumalik and Zainuddin, Hishamuddin (2011) Localization principle of the spectral expansions of distributions connected with Schodinger operator. Australian Journal of Basic and Applied Sciences, 5 (5). pp. 1-4. ISSN 1991-8178

Ahsan, Amimul and Imteaz, Monzur Alam and Naser, Jamal and Rahman, Ataur (2011) Reliability analysis of rainwater tanks in Melbourne using daily water balance model. Resources, Conservation and Recycling, 56 (1). pp. 80-86. ISSN 0921-3449

Ahsan, Amimul and Imteaz, Monzur Alam and Shanableh, Abdallah and Rahman, Ataur (2011) Optimisation of rainwater tank design from large roofs: A case study in Melbourne, Australia. Resources, Conservation and Recycling, 55 (11). pp. 1022-1029. ISSN 0921-3449

Ahsan, Amimul and Noor Mohammad, and Alam, Md. Zahangir and A. Kabbashi, Nassereldeen (2011) Effective composting of oil palm industrial waste by filamentous fungi: A review. Resources, Conservation and Recycling, 58. pp. 69-78. ISSN 0921-3449

Ahsan, Amimul and Rahman, Md. Mahmudur and Billah, M. Masum and Mahbubur Rahman, A. T. M. and Kalam, M. A. (2011) Numerical investigation of heat transfer enhancement of nanofluids in an inclined lid-driven triangular enclosure. International Communications in Heat and Mass Transfer, 38 (10). pp. 1360-1367. ISSN 0735-1933

Ahsan, Amimul and Rahman, Md. Mahmudur and Rahim, N. A. and Saha, Sumon and Billah, M. Masum and Saidur, R. (2011) Optimization of mixed convection in a Lid-driven enclosure with a heat generating circular body. Numerical Heat Transfer, Part A: Applications: An International Journal of Computation and Methodology, 60 (7). pp. 629-650. ISSN 1040-7782

Aji, Isuwa Suleiman and Zainudin, Edi Syams and Abdan, Khalina and Salit, Mohd Sapuan (2011) Effect of fibre size and fibre loading on tensile properties of hybridized kenaf/PALF reinforced HDPE composite. Key Engineering Materials, 471-472. pp. 680-685. ISSN 1013-9826; ESSN: 1662-9795

Aji, Isuwa Suleiman and Zainudin, Edi Syams and Abdan, Khalina and Salit, Mohd Sapuan (2011) Optimizing processing parameters for hybridized kenaf/PALF reinforced HDPE composite. Key Engineering Materials, 471-472. pp. 674-679. ISSN 1013-9826; ESSN: 1662-9795

Aji, Isuwa Suleiman and Zainudin, Edi Syams and Abdan, Khalina and Salit, Mohd Sapuan and Mohd Dahlan, Khairul Zaman (2011) Studying the effect of fiber size and fiber loading on the mechanical properties of hybridized kenaf/PALF-reinforced HDPE composite. Journal of Reinforced Plastics and Composites, 30 (6). pp. 546-553. ISSN 0731-6844; ESSN: 1530-7964

Ajiya, M. and Al-Mansoori, M.H. and Mahdi, Mohd Adzir (2011) Widely tunable linear-cavity multiwavelength fiber laser with distributed Brillouin scattering. Chinese Optics Letters , 9 (3 ). 031401. ISSN 1671-7694

Akande, Fatai Bukola and Ahmad, Desa and Othman, Jamarei and Sulaiman, Shamsuddin and Fashina, Adepoju B. and Shamsabadi, Hossein (2011) Investigative studies on the effects of tyre inflation pressure on the motion resistance of pneumatic bicycle wheels on hard and deformable surfaces. Journal of Agricultural Machinery Science, 7 (3). pp. 317-323. ISSN 1306-0007

Akande, Fatai Bukola and Ahmad, Desa and Sulaiman, Shamsuddin and Fashina, Adepoju B. (2011) Present state of research on narrow wheels: a prerequisite for traction studies on non-lug narrow wheels. Leonardo Electronic Journal of Practices and Technologies, 10 (18). pp. 65-78. ISSN 1583-1078

Akorede, Mudathir Funsho and Hizam, Hashim and Aris, Ishak and Ab Kadir, Mohd Zainal Abidin (2011) Effective method for optimal allocation of distributed generation units in meshed electric power systems. IET Generation, Transmission & Distribution, 5 (2). pp. 276-287. ISSN 1751-8687; ESSN: 1751-8695

Akorede, Mudathir Funsho and Hizam, Hashim and Aris, Ishak and Ab Kadir, Mohd Zainal Abidin and Hojabri, Mojgan (2011) A windows-based tool for power flow analysis and DG optimisation in radial distribution networks. Scientific Research and Essays, 6 (6). pp. 1285-1302. ISSN 1992-2248

Al Boredi, Omar Noori Salih and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Shakil, Asma (2011) An adaptive approach for Malay cheque words recognition using support vector machine. Scientific Research and Essays, 6 (6). art. no. 6D71C7023325. pp. 1328-1336. ISSN 1992-2248

Al-Asadi, H. A. and Al-Mansoori, M. H. and Hitam, Salasiah and Saripan, M. Iqbal and Mahdi, Mohd Adzir (2011) Particle swarm optimization on threshold exponential gain of stimulated Brillouin scattering in single mode fibers. Optics Express, 19 (3 ). pp. 1842-1853. ISSN 1094-4087; ESSN:1094-4087

Al-Asadi, Hamid Ali Abed and A. Bakar, Ahmad Ashrif and Mahamd Adikan, Faisal Rafiq and Mahdi, Mohd Adzir (2011) Analytical study of nonlinear phase shift through stimulated Brillouin scattering in single mode fiber with the pump power recycling technique. Journal of Optics A-Pure and Applied Optics , 13 (10). p. 105701. ISSN 1464-4258; ESSN:1741-3567

Al-Asadi, Hamid Ali Abed and Abu Bakar, Muhammad Hafiz and Al-Mansoori, Mohammed Hayder and Mahamd Adikan, Faisal Rafiq and Mahdi, Mohd Adzir (2011) Analytical analysis of second-order Stokes wave in Brillouin ring fiber laser. Optics Express, 19 (25). pp. 25741-25748. ISSN 1094-4087

Al-Azzawi, Alaa Kh. and Saripan, M. Iqbal and Jantan, Adznan and O. K. Rahmat, Rahmita Wirza (2011) Edge detection innovator based on wavelet coefficients for images corrupted by the white-Gaussian noise. Scientific Research and Essays, 6 (28). art. no. 47054BF26803. pp. 5951-5965. ISSN 1992-2248

Al-Azzawi, Alaa Kh. and Saripan, M. Iqbal and Jantan, Adznan and O. K. Rahmat, Rahmita Wirza (2011) Error concealment innovator based on the multi-directional interpolation by using the similarity segmentation. Scientific Research and Essays, 6 (1). art. no. 30EFBDD16366. pp. 52-65. ISSN 1992-2248

Al-Azzo, Wisam F. and Mohd Ali, Borhanuddin (2011) Adaptive square-rooting companding technique for PAPR reduction in OFDM systems. International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, 5 (3). pp. 283-287. ISSN 1307-6892

Al-Hassoun, Saleh A. and Mohammad, Thamer Ahmed (2011) Prediction of water table in an alluvial aquifer using modflow. Pertanika Journal of Science & Technology, 19 (1). pp. 45-55. ISSN 0128-7680; ESSN: 2231-8526

Al-Mansoori, M. H. and Mahdi, Mohd Adzir (2011) Broadly tunable L-band multiwavelength BEFL utilizing nonlinear amplified loop mirror filter. Optics Express, 19 (24). pp. 23981-23988. ISSN 1094-4087

Al-Obaidi, Mohammed Mahmoud Ahmad and Ali, Salmiaton and Wan Ab. Karim Ghani, Wan Azlina and Mohd Salleh, Mohammad Amran and Ahmadun, Fakhru'l-Razi and Yap, Taufiq Yun Hin (2011) Hydrogen rich gas from oil palm biomass as a potential source of renewable energy in Malaysia. Renewable and Sustainable Energy Reviews, 15 (2). pp. 1258-1270. ISSN 1364-0321; ESSN: 1879-0690

Alaghbari, Wa'el and Salim, Azizah and Dola, Kamariah and Abang Ali, Abang Abdullah (2011) Developing affordable housing design for low income in Sana'a, Yemen. International Journal of Housing Markets and Analysis, 4 (1). pp. 84-98. ISSN 1753-8270; ESSN: 1753-8289

Algorafi, Mohammad A. and Abang Ali, Abang Abdullah and Othman, Ismail and Jaafar, Mohd Saleh and Al-Mansob, Ramez Alezzi (2011) Evaluation of structural behavior of externally prestressed segmented bridge with shear key under torsion. Journal of Engineering, Project, and Production Management, 1 (1). pp. 28-35. ISSN 2221-6529; ESSN: 2223-8379

Alhawari, Adam Reda Hasan and Ismail, Alyani and Mahdi, Mohd Adzir and Raja Abdullah, Raja Syamsul Azmir (2011) Development of novel tunable dual-band negative index metamaterial using open stub-loaded stepped-impedance resonator. Progress In Electromagnetics Research B, 35. pp. 111-131. ISSN 1937-6472

Alhawari, Adam Reda Hasan and Ismail, Alyani and Mahdi, Mohd Adzir and Raja Abdullah, Raja Syamsul Azmir (2011) Miniaturized ultra-wideband antenna using microstrip negative index metamaterial. Electromagnetics, 31 (6). pp. 404-418. ISSN 0272-6343; ESSN: 1532-527X

Ali, Aidy and Jaafar, Mohd Saleh and Alwathaf, Ahmed Hasan and Algorafi, Mohammed A. (2011) Stress-strain modelling of reinforced concrete membrane sructures. International Journal of Physical Sciences, 6 (30). art. no. 70A532621254. pp. 6820-6828. ISSN 1992-1950

Ali, Aidy and Radeef, Zainab Shakir and Abdan, Khalina and Salit, Mohd Sapuan (2011) Development of anti-ballistic board from ramie fiber. Polymer-Plastics Technology and Engineering, 50 (6). pp. 622-634. ISSN 0360-2559; ESSN: 1525-6111

Ali, Hazem Ibrahim and Mohd Noor, Samsul Bahari and Bashi, Sinan Mahmod and Marhaban, Mohammad Hamiruce (2011) Intelligently tuned weights based robust H∞ controller design for pneumatic servo actuator system with parametric uncertainty. Australian Journal of Basic and Applied Sciences, 5 (4). pp. 207-222. ISSN 1991-8178

Ali, Salmiaton and Garforth, Arthur A. (2011) Multiple use of waste catalysts with and without regeneration for waste polymer cracking. Waste Management, 31 (6). pp. 1139-1145. ISSN 0956-053X; ESSN: 1879-2456

Alshehri, Saleh A. and Khatun, Sabira and Jantan, Adznan and Raja Abdullah, Raja Syamsul Azmir and Mahmud, Rozi and Awang, Zaiki (2011) Experimental breast tumor detection using NN-based UWB imaging. Progress In Electromagnetics Research, 111. pp. 447-465. ISSN 1070-4698; ESSN: 1559-8985

Alshehri, Saleh Ali and Khatun, Sabira and Jantan, Adznan and Raja Abdullah, Raja Syamsul Azmir and Mahmud, Rozi and Awang, Zaiki (2011) 3D experimental detection and discrimination of malignant and benign breast tumor using NN-based UWB imaging system. Progress In Electromagnetics Research, 116. pp. 221-237. ISSN 1070-4698; ESSN: 1559-8985

Alsultaney, Hazem K. and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Ali, Aidy and Mustapha, Faizal (2011) An experimental validation and optimisation tool path strategy for thin walled structure. Pertanika Journal of Science & Technology, 19 (2). pp. 365-371. ISSN 0128-7680; ESSN: 2231-8526

Amini, Seyed Ata and Mohammed, Thamer Ahmed and Abdul Aziz, Azlan and Ghazali, Abdul Halim and Kim Huat, Bujang (2011) A local scour prediction method for pile caps in complex piers. Proceedings of the Institution of Civil Engineers - Water Management, 164 (2). pp. 73-80. ISSN 1741-7589; ESSN: 1751-7729

Amiri, Fazel and Mohamed Shariff, Abdul Rashid and Arekhi, Saleh (2011) An approach for rangeland suitability analysis to apiculture planning in Gharah Aghach region, Isfahan-Iran. World Applied Sciences Journal, 12 (7). pp. 962-972. ISSN 1818-4952; ESSN: 1991-6426

Anisseh, Mohammad and Mohd Yusuff, Rosnah (2011) Developing a fuzzy TOPSIS model in multiple attribute group decision making. Scientific Research and Essays, 6 (5). art. no. B9D4E3E19692. pp. 1046-1052. ISSN 1992-2248

Anisseh, Mohammad and Mohd Yusuff, Rosnah (2011) A fuzzy group decision making model for multiple criteria based on Borda count. International Journal of Physical Sciences, 6 (3). pp. 425-433. ISSN 1992-1950

Anuar, Afdiman and Mohd Yusuff, Rosnah (2011) Manufacturing best practices in Malaysian small and medium enterprises (SMEs). Benchmarking, 18 (3). pp. 324-341. ISSN 1463-5771; ESSN: 1758-4094

Anvari, Alireza and Zulkifli, Norzima and Mohd Yusuff, Rosnah (2011) Evaluation of approaches to safety in lean manufacturing and safety management systems and clarification of the relationship between them. World Applied Sciences Journal, 15 (1). pp. 19-26. ISSN 1818-4952; ESSN: 1991-6426

Ariafar, Sh. and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Firoozi, Z. (2011) A stochastic facility layout model in cellular manufacturing systems. International Journal of the Physical Sciences, 6 (15). pp. 3666-3670. ISSN 1992-1950

Ariafar, Shahram and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Firoozi, Zahra (2011) Design of a facility layout model in hybrid cellular manufacturing systems under variable demand. International Journal of Industrial and Systems Engineering, 9 (4). pp. 373-387. ISSN 1748-5037; ESSN: 1748-5045

Ariafar, Shahram and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Firoozi, Zahra (2011) Facility layout design for hybrid cellular manufacturing systems. International Journal of Physical Sciences, 6 (14). pp. 3551-3556. ISSN 1992-1950

Ariffin, Abdul Azis and Mohamud, Y. and Karim, Roselina and Boo, Huey Chern and Chin, Nyuk Ling and Che Man, Yaakob (2011) Rheological, chemical and DSC thermal characteristics of different types of palm oil/palm stearin-based shortenings. International Food Research Journal, 18 (1). pp. 189-200. ISSN 1985-4668; ESSN: 2231-7546

Aris, Ishak and Ali, Liakot and Hossain, Fakri Sharif and Roy, Niranjan (2011) Design of an Ultra High Speed AES Processor for Next Generation IT Security. International Journal of Computer and Electrical Engineering, 37 (6). pp. 1160-1170. ISSN 0045-7906

Aris, Ishak and Boretti, Alberto and Osman, Azmi (2011) Direct Injection of Hydrogen, Oxygen, and Water in a Novel Two Stroke Engine. International Journal on Hydrogen Energy, 36 (16). 10100- 10106. ISSN 0360-3199

Aris, Ishak and Marhaban, Mohammad Hamiruce and Misron, Norhisam and A. K. M., Parvez Iqbal (2011) Design Process Involved in Developing Mechanism of linear Motor Operated Multiple Spray Operations Spray Gun. Australian Journal of Basic and Applied Sciences, 5 (7). 843 -850. ISSN 1991-8178

Arvin, Farshad and Samsudin, Khairulmizam and Ramli, Abdul Rahman and Bekravi, Masoud (2011) Imitation of honeybee aggregation with collective behavior of swarm robots. International Journal of Computational Intelligence Systems, 4 (4). pp. 739-748. ISSN 1875-6891; ESSN: 1875-6883

Asadi, Afshin and Kim Huat, Bujang and Moayedi, Hossein and Shariatmadari, Nader and Parsaie, Alireza (2011) Changes of hydraulic conductivity of silty clayey sand soil under the effects of municipal solid waste leachate. International Journal of Physical Sciences, 6 (12). pp. 2869-2874. ISSN 1992-1950

Asadi, Afshin and Kim Huat, Bujang and Musa, Mohamed Hanafi and Mohammed, Thamer Ahmed and Shariatmadari, Nader (2011) Chemico-geomechanical sensitivities of tropical peat to pore fluid pH related to controlling electrokinetic environment. Journal of the Chinese Institute of Engineers, 34 (4). pp. 481-487. ISSN 0253-3839; ESSN: 2158-7299

Asadi, Afshin and Moayedi, Hossein and Kim Huat, Bujang and Parsaie, Alireza (2011) Probable electrokinetic phenomena in tropical peat: a review. International Journal of Physical Sciences, 6 (9). pp. 2184-2188. ISSN 1992-1950

Asadi, Afshin and Shariatmadari, Nader and Moayedi, Hossein and Kim Huat, Bujang (2011) Effect of MSW leachate on soil consistency under influence of electrochemical forces induced by soil particles. International Journal of Electrochemical Science, 6 (7). pp. 2344-2351. ISSN 1452-3981

Asni, Hazila and Wagiran, Husin and Hossain, Md. Imam and Ramli, Ahmad Termizi and Saripan, M. Iqbal (2011) Thermoluminescence energy response of TLD-100 subjected to photon irradiation using Monte Carlo N-particle transport code version 5. Journal of Engineering Thermophysics, 20 (3). art. no. 329. pp. 329-333. ISSN 1810-2328; ESSN: 1990-5432

Awang Biak, Dayang Radiah and Ahmadun, Fakhru'l-Razi and Md. Yasin, Faizah and Mohd Yusoff, Hamdan and Ahamad, Intan Salwani and Atiyah, Mahmood Rashid (2011) Low temperature growth of vertically aligned carbon nanotubes via floating catalyst chemical vapor deposition method. Journal of Material Science and Technology, 27 (4). pp. 296-300. ISSN 1005-0302

Awang Biak, Dayang Radiah and Yunus, Robiah and Zainal Abidin, Zurina and Harun, Mohd Yusof (2011) Effect of physical pretreatment on dilute acid hydrolysis of water hyacinth (Eichhornia crassipes). Bioresource Technology, 102 (8). pp. 5193-5199. ISSN 0960-8524

Awwad, Samer A. B. and Ng, Chee Kyun and Noordin, Nor Kamariah and A. Rasid, Mohd Fadlee (2011) Cluster based routing protocol for mobile nodes in wireless sensor network. Wireless Personal Communications, 61 (2). pp. 251-281. ISSN 0929-6212; ESSN: 1572-834X

Azimzadeh, Fatemeh and Ramli, Abdul Rahman and Mohd Ali, Borhanuddin and Ibrahim, Hamidah (2011) Weblog search engine based on quality criteria. International Journal on Computer Science and Engineering, 3 (1). pp. 352-358. ISSN 2229-5631; ESSN: 0975-3397

Bachtiar, Dandi and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdan, Khalina and Mohd Dahlan, Khairul Zaman (2011) Effects of alkaline treatment and a compatibilizing agent on tensile properties of sugar palm fibre-reinforced high impact polystyrene composites. BioResources, 6 (4). pp. 4815-4823. ISSN 1930-2126

Bahraminasab, Marjan and Sahari, Barkawi and Hassan, Mohd Roshdi and Arumugam, Manohar and Shamsborhan, Mahmoud (2011) Finite element analysis of the effect of shape memory alloy on the stress distribution and contact pressure in total knee replacement. Trends in Biomaterials & Artificial Organs, 25 (3). pp. 95-100. ISSN 0971-1198

Bakhtiari, Mohd Reza and Ahmad, Desa and Othman, Jamarei and Ismail, Napsiah (2011) Physical and mechanical properties of kenaf seed. Applied Engineering in Agriculture, 27 (2). pp. 263-268. ISSN 0883-8542; ESSN: 1943-7838

Behrooz, Farinaz and Ramli, Abdul Rahman and Samsudin, Khairulmizam (2011) A survey on applying different control methods approach in building automation systems to obtain more energy efficiency. International Journal of Physical Sciences, 6 (9). pp. 2308-2314. ISSN 1992-1950

Bejo, Siti Khairunniza and Mohamed Shariff, Abd Rashid (2011) Historical analysis of the land movement in landslide area using elastic image registration and conditional statement approach. International Journal of Multimedia and Ubiquitous Engineering, 6 (3). pp. 37-48. ISSN 1975-0080

Bernard, Martin and Abdan, Khalina and Ali, Aidy and Janius, Rimfield and Faizal, Muhammad and K. S., Hasanah and Sanuddin, Asmawi (2011) The effect of processing parameters on the mechanical properties of kenaf fibre plastic composite. Materials and Design, 32 (2). pp. 1039-1043. ISSN 0264-1275; ESSN: 1873-4197

Bimakr, Mandana and Abdul Rahman, Russly and Ganjloo, Ali and Taip, Farah Saleena (2011) Antioxidant activity of spearmint (Mentha spicata L.) leaves extracts by supercritical carbon dioxide (SC-CO2) extraction. International Food Research Journal, 18 (2). pp. 543-547. ISSN 1985-4668; ESSN: 2231-7546

Bimakr, Mandana and Abdul Rahman, Russly and Taip, Farah Saleena and Gajloo, Ali and Md Salleh, Liza and Selamat, Jinap and Abdul Hamid, Azizah and Sarker, Zaidul Islam (2011) Comparison of different extraction methods for the extraction of major bioactive flavonoid compounds from spearmint (Mentha spicata L.) leaves. Food and Bioproducts Processing, 89 (1). pp. 67-72. ISSN 0960-3085

Bradley, David Andrew and Hashim, S. and Saripan, M. Iqbal and Wells, Kevin and Dunn, W. L. (2011) Photon signature analysis using template matching. Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 652 (1). pp. 466-469. ISSN 0168-9002

Chapelle, Audrey and Yaacob, Mohd. Hanif and Pasquet, Isabelle and Presmanes, Lionel and Barnabé, Antoine and Tailhades, Philippe and Plessis, Johan Du and Kalantar-Zadeh, Kourosh (2011) Structural and gas-sensing properties of CuO-CuxFe3-xO4 nanostructured thin films. Sensors and Actuators B: Chemical, 153 (1 ). pp. 117-124. ISSN 0925-4005

Che Lah, Nur Azida and Ali, Aidy (2011) Fatigue strength improvement of MIG-welded joint by shot peening. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012001. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Che Mat, Ruzinoor and Mohamed Shariff, Abdul Rashid and Pradhan, Biswajeet and Mahmud, Ahmad Rodzi (2011) Online 3D terrain visualization of GIS data: a comparison between three different web servers. Pertanika Journal of Science & Technology, 19 (S). pp. 31-39. ISSN 0128-7680; ESSN: 2231-8526

Che Soh, Azura and Abdul Rahman, Ribhan Zafira and Ab Kadir, Mohd Zainal Abidin and Mohd Shif, Nor Shazana (2011) Development of the lightning location mapping system using fuzzy logic technique. International Review on Modelling and Simulations, 4 (6). pp. 3301-3308. ISSN 1974-9821; ESSN: 2533-1701

Che Soh, Azura and Hassan, Mohd Khair and Abdul Rahman, Ribhan Zafira (2011) A fuzzy-fault classifier system for malfunction traffic light system classification. Journal of Theoretical and Applied Information Technology, 34 (2 / De). pp. 226-240. ISSN 1992-8645

Chew, Few Ne and Tan, Wen Siang and Ling, Tau Chuan and Tey, Beng Ti (2011) Optimization of a native gel electrophoretic process for the purification of intracellular green fluorescent protein from intact Escherichia coli cells. Process Biochemistry, 46 (1). pp. 399-403. ISSN 1359-5113; ESSN: 1873-3298

Chew, Few Ne and Tan, Wen Siang and Tey, Beng Ti (2011) Fluorescent quantitation method for differentiating the nativity of green fluorescent protein. Journal of Bioscience and Bioengineering, 111 (2). pp. 246-248. ISSN 1389-1723; ESSN: 1347-4421

Chien, Wei Ooi and Chin, Ping Tan and Siew, Ling Hii and Ariff, Arbakariya and Ibrahim, Shaliza and Tau, Chuan Ling (2011) Primary recovery of lipase derived from Burkholderia sp. ST8 with aqueous micellar two-phase system. Process Biochemistry, 46 (9). pp. 1847-1852. ISSN 1359-5113

Chin, Kit Ling and H'ng, Paik San and Wong, Lih Jiun and Tey, Beng Ti and Md. Tahir, Paridah (2011) Production of glucose from oil palm trunk and sawdust of rubberwood and mixed hardwood. Applied Energy, 88 (11). pp. 4222-4228. ISSN 0306-2619; ESSN: 1872-9118

Chin, Nyuk Ling and Yeoh, Chui Yen and Tan, C. S. (2011) Co-composting of palm oil mill wastes. Journal of Food, Agriculture and Environment, 9 (3&4). pp. 880-885. ISSN 1459-0255

Chin, Nyuk Ling and Yeoh, Chui Yen and Tan, C. S. and Ooi, H. S. (2011) Acceleration effects of microbial inoculum on palm oil mill organic waste composting. Compost Science and Utilization , 19 (2). pp. 135-142. ISSN 1065-657X

Chin, Nyuk Ling and Yusof, Yus Aniza and Abdullah, Rohaiza (2011) Glazing effects on bread crust and crumb staling during storage. Journal of Texture Studies, 42 (6). pp. 459-467. ISSN 0022-4901

Chin, Nyuk Ling and Yusof, Yus Aniza and Tan, Mei Ching (2011) Power ultrasound aided batter mixing for sponge cake batter. Journal of Food Engineering, 104 (3). pp. 430-437. ISSN 0260-8774

Chin, Nyuk Ling and Yusof, Yus Aniza and Teng, Li Yuen (2011) Rheological and textural studies of fresh and freeze-thawed native sago starch-sugar gels. I. Optimisation using response surface methodology. Food Hydrocolloids, 25 (6). pp. 1530-1537. ISSN 0268-005X

Chong, Gun Hean and Yunus, Robiah and Choong, Thomas Shean Yaw and Abdullah, Norhafizah and Spotar, Sergey (2011) Simple guidelines for a self-built laboratory-scale supercritical anti-solvent system. Journal of Supercritical Fluids , 60 (-). pp. 69-74. ISSN 0896-8446; ESSN:1872-8162

Chuah, Luqman and Mirjalili, Fatemeh and Mohamad, Hasmaliza (2011) Effect of stirring time on synthesis of ultra fine x-Al2O3 powder by a simple sol-gel method. Journal of Ceramic Processing Research, 12 (6). pp. 738-741. ISSN 1229-9162

Daneshmand, Saman and Kim Huat, Bujang and Asadi, Afshin and Farshchi, Iman (2011) Slope stability analysis with applicability of lime in capillary barrier effects. Electronic Journal of Geotechnical Engineering, 16 (bund. O). pp. 1287-1299. ISSN 1089-3032

Daneshmand, Saman and Kim Huat, Bujang and Moayedi, Hossein and Mohammad Ali, Thamer Ahmad (2011) Study on water quality parameters of Linggi and Melaka rivers catchments in Malaysia. Engineering Journal, 15 (4). pp. 41-52. ISSN 0125-8281

Darestani, Soroush Avakh and Ismail, Md. Yusof and Ismail, Napsiah and Mohd Yusuff, Rosnah (2011) A material and product audit method for determining the level of quality. Advanced Materials Research, 264-265. pp. 1714-1718. ISSN 1022-6680; ESSN: 1662-8985

Darmadi, and Choong, Thomas Shean Yaw and Chuah, Teong Guan and Yap, Taufiq Yun Hin and Thaib, Anwar (2011) Use of Box-Behnken design in the preparation of mesoporous carbon coated monolith - BET surface area. Research Journal of Chemistry and Environment, 15 (2). pp. 1-5. ISSN 0972-0626; ESSN: 2278-4527

Dashtizadeh, Zahra and Ali, Aidy and Abdan, Khalina (2011) A review of non-destructive thermography techniques toward structural integrity of bio-composites. Key Engineering Materials, 471-472. pp. 103-108. ISSN 1013-9826; ESSN: 1662-9795

Davari, Atefeh and Marhaban, Mohammad Hamiruce and Mohd Noor, Samsul Bahari and Karimadini, Mohammad and Karimoddini, Ali (2011) Parameter estimation of K-distributed sea clutter based on fuzzy inference and Gustafson-Kessel clustering. Fuzzy Sets and Systems, 163 (1). pp. 45-53. ISSN 0165-0114; ESSN: 1872-6801

Davoodi, Seyed Rasoul and Hamid, Hussain and Arintono, Sulistyo and Muniandy, Ratnasamy and Faezi, Seyed Farzin (2011) Motorcyclist rear brake simple perception-response times in rear-end collision situations. Traffic Injury Prevention, 12 (2). pp. 174-179. ISSN 1538-9588; ESSN: 1538-957X

Deboucha, Sadek and Hashim, Roslan and Abdul Aziz, Azlan (2011) Engineering properties of cemented peat bricks. Scientific Research and Essays, 6 (8). art. no. 3E8CE1120560. pp. 1732-1739. ISSN 1992-2248

Dehzangi, Arash and Larki, Farhad and Saion, Elias and Hatagalung, Sabar D. and Abdullah, Ahmad Makarimi and Hamidon, Mohd Nizar and Hassan, Jumiah (2011) Study the characteristic of p-type junction-less side gate silicon nanowire transistor fabricated by atomic force microscopy lithography. American Journal of Applied Sciences, 8 (9). pp. 872-877. ISSN 1546-9239; ESSN: 1554-3641

Djojodihardjo, Harijono and Abang Abdul Majid, Dayang Laila and Romli, Fairuz Izzudin and Basri, Shahnor and Abdul Hamid, Mohd Faisal (2011) Numerical Simulation And Analysis Of Coanda Effect Circulation Control For Wind-Turbine Application Considerations. IIUM Engineering Journal. pp. 19-42. ISSN 1511-788X

Djojodihardjo, Harijono and M., Fadly and Sidek, Othman and Md Said, Md Azlin and Adam, Ain (2011) Deterministic and Recursive Approach in Attitude Determination for InnoSAT. Telkomnika, 9 (3). p. 12. ISSN 1693-6930

Dodangeh, Javad and Mohd Yusuff, Rosnah and Jassbi, Javad (2011) The best selection of strategic plans in balanced scorecard using multi-objective decision making model. African Journal of Business Management, 5 (3). art. no. B7735C517562. pp. 681-686. ISSN 1993-8233

El Pebrian, Darius and Yahya, Azmi (2011) Mechanised weed control applicator for mature oil palm. Planter , 87 (1019). pp. 85-100. ISSN 0126-575X

El-Shekeil, Yousuf Ali and Salit, Mohd Sapuan and Abdan, Khalina and Zainudin, Edi Syams (2011) Development of a new kenaf bast fiber-reinforced thermoplastic polyurethane composite. BioResources, 6 (4). pp. 4662-4672. ISSN 1930-2126

El-Shekeil, Yousuf Ali Gumaan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdan, Khalina (2011) Optimizing processing parameters and fiber size for kenaf fiber reinforced thermoplastic polyurethane composite. Key Engineering Materials, 471-472. pp. 297-302. ISSN 1013-9826; ESSN: 1662-9795

Ellouze, Fatma and Ben Amar, Nihel and Mokhtar, Mohd Noriznan and Zimmermann, Wolfgang and Deratani, Andre (2011) Fractionation of homologous CD6 to CD60 cyclodextrin mixture by ultrafiltration and nanofiltration. Journal of Membrane Science, 374 (1-2). pp. 129-137. ISSN 0376-7388; ESSN: 1873-3123

Endan, Johari and Ahmad, Desa and Taip, Farah Saleena and Keshvadi, Afshin and Harun, Haniff (2011) Palm oil quality monitoring in the ripening process of fresh fruit bunches. International Journal of Advanced Engineering, Sciences and Technologies, 4 (1). 026-052. ISSN 2230-7818

Endan, Johari and Ahmad, Desa and Taip, Farah Saleena and Keshvadi, Afshin and Harun, Haniff (2011) The effect of high temperature on viscosity of palm oil during the ripening process of fresh fruits. International Journal of Scientific & Engineering Research., 2 (6). pp. 1-7. ISSN 2229-5518

Endan, Johari and Ahmad, Desa and Taip, Farah Saleena and Keshvadi, Afshin and Harun, Haniff (2011) The relationship between palm oil index development and mechanical properties in the ripening process of Tenera variety fresh fruit bunches. Research Journal of Applied Sciences, Engineering and Technology, 3 (3). pp. 218-226. ISSN 2040-7459

Endan, Johari and Ahmad, Desa and Taip, Farah Saleena and Keshvadi, Afshin and Harun, Haniff (2011) The relationship between palm oil quality index development and physical properties of fresh fruit bunches in the ripening process. Advance Journal of Food Science and Technology, 3 (1). pp. 50-68. ISSN 2042-4868

Endan, Johari and Jaafar, Mohd Saleh and Taip, Farah Saleena and Fadhil, Rahmat and S. Arziman, Siti Nurazila (2011) Effectiveness of floating micro-bead bio-filter for ornamental fish in a re-circulating aquaculture system. Fisheries and Aquaculture Journal (28). pp. 1-8. ISSN 2150-3508

Eslamian, Saeed and Sahari, Barkawi and Ali, Aidy and Mahdi, Elsadig and Hamouda, Abdel Magid Salem (2011) Microscopic study of 5083-H321 aluminium alloy under fretting fatigue condition. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012026. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Esmaeilian, Gholam Reza and Sulaiman, Shamsuddin and Ismail, Napsiah and Hamedi, Maryam and Megat Ahmad, Megat Mohammad Hamdan (2011) A tabu search approach for mixed-model parallel assembly line balancing problem (type II). International Journal of Industrial and Systems Engineering, 8 (4). pp. 407-431. ISSN 1748-5037; ESSN: 1748-5045

Esmaeilian-Marnani, Aida and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir and Samsudin, Khairulmizam (2011) Implementation of overlapping soliton pair to reduce time delay in femtosecond pulse propagation over short standard single mode fiber. Modern Physics Letters B, 25 (26). pp. 2091-2098. ISSN 0217-9849; ESSN: 1793-6640

Esmaeilian-Marnani, Aida and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir and Samsudin, Khairulmizam (2011) Ultrafast two-bit all-optical analog-to-digital conversion based on femtosecond soliton sequence sampling. Optical Engineering , 50 (12). 125001-1 25004. ISSN 0091-3286; ESSN:1560-2303

Esmaelean-Marnani, A. and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir and Samsudin, Khairulmizam (2011) Implementation Of overlapping soliton pair to reduce time delay in femtosencond pulse propagation over short standard single mode fiber. Modern Physics Letters B, 25 (26). pp. 2091-2098. ISSN 0217-9849; ESSN:1793-6640

Fadhil, Rahmat and Endan, Johari and Taip, Farah Saleena and Ja'afar, Muhammad Salih (2011) Biological performance of Asian catfish (Clarias batrachus) (Teleostei, Clariidae) cultured in recirculating aquaculture system. AACL Bioflux, 4 (5). pp. 684-690. ISSN 1844-8143; ESSN: 1844-9166

Farahani, Meysam and Sheikh Abdullah, Siti Rozaimah and Hosseini, Soraya and Shojaeipour, Shahed (2011) Adsorption-based cationic dyes using the carbon active sugarcane bagasse. Procedia Environmental Sciences, 10 (pt.A). pp. 203-208. ISSN 1878-0296

Farzadnia, Nima and Abang Ali, Abang Abdullah and Demirboga, Ramazan (2011) Incorporation of mineral admixtures in sustainable high performance concrete. International Journal of Sustainable Construction Engineering & Technology, 2 (1). pp. 44-56. ISSN 2180-3242

Fatchurrohman, Nanang and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Abdul Aziz, Faieza and Baharudin, B. T. Hang Tuah (2011) Metal matrix composites: solidification parameters of aluminium-11.8% silicon alloy reinforced with titanium carbide particulates. Key Engineering Materials, 471-472. pp. 1081-1084. ISSN 1013-9826; ESSN: 1662-9795

Firouzi, Amin and Sobri, Shafreeza and Md. Yasin, Faizah and Ahmadun, Fakhru'l-Razi (2011) CH4 and CO2 detection by using carbon nanotube-based sensors. Advanced Materials Research, 214. pp. 482-489. ISSN 1022-6680; ESSN: 1662-8985

Firouzi, Amin and Sobri, Shafreeza and Md. Yasin, Faizah and Ahmadun, Fakhru'l-Razi (2011) The effect of CH4 and CO2 exposure on carbon nanotubes electrical resistance. Advanced Materials Research, 214. pp. 655-661. ISSN 1022-6680; ESSN: 1662-8985

Ganjloo, Ali and Abdul Rahman, Russly and Bakar, Jamilah and Osman, Azizah and Bimakr, Mandana (2011) Mathematical modelling of mass transfer during osmotic dehydration of seedless guava (Pisidium guajava L.) cubes. International Food Research Journal, 18 (3). pp. 1105-1110. ISSN 1985-4668; ESSN: 2231-7546

Gaspera, E. Della and Martucci, A. and Yaacob, Mohd. Hanif and Ou, J. and Kalantar-Zadeh, K. and Wlodarski, W. (2011) WO3-Au-Pt nanocrystalline thin films as optical gas sensors. Sensor Letters, 9 (2 ). pp. 595-599. ISSN 1546-198X; ESSN:1546-1971

Ghahraei, Omid and Ahmad, Desa and Abdan, Khalina and Suryanto, Hadi and Othman, Jamarei (2011) Cutting tests of kenaf stems. Transactions of the ASABE, 54 (1). pp. 51-56. ISSN 2151-0032; ESSN: 2151-0040

Ghiasi, Vahed and Omar, Husaini (2011) Analysis of shotcrete lining of underground tunnels. Pertanika Journal of Science & Technology, 19 (2). pp. 249-257. ISSN 0128-7680; ESSN: 2231-8526

Ghiasi, Vahed and Omar, Husaini and Kazemian, Sina and Ghiasi, Samad and Kim Huat, Bujang and Muniandy, Ratnasamy and Baharvand, Moharam and Hosaini, Seyed Ghavamoddin and Souri, Morteza and Prasad, Arun and Md Yusoff, Zainuddin and Safaei, Mehrdad (2011) Subway station seismic consideration based on geotechnical study: a case study approach. Scientific Research and Essays, 6 (9). art. no. 1E1E63220128. pp. 1940-1956. ISSN 1992-2248

Ghiasi, Vahed and Omar, Husaini and Kim Huat, Bujang and Muniandi, Ratnasamy and Md Yusoff, Zainuddin (2011) Risk management overview of tunnels using numerical modeling. Journal of Engineering, Design and Technology, 9 (1). pp. 110-124. ISSN 1726-0531; ESSN: 1758-8901

Ghiasi, Vahed and Omar, Husaini and Md Yusoff, Zainuddin and Ghiasi, Samad and Kim Huat, Bujang and Muniandy, Ratnasamy and Baharvand, Moharam and Hosaini, Seyed Ghavamoddin and Souri, Morteza and Ghosni, Nassimsadat and Noushini, Amin and Afshar, Mohammad Amin and Prasad, Arun and Kazemian, Sina (2011) Urban rail network connectivity in locating transfer stations: a case study of Tehran urban railway. Scientific Research and Essays, 6 (9). art. no. DE1B16019833. pp. 1891-1899. ISSN 1992-2248

Ghiasi, Vahed and Omar, Husaini and Rostami, Jamal and Md Yusoff, Zainuddin and Ghiasi, Samad and Kim Huat, Bujang and Muniandy, Ratnasamy (2011) Geotechnical and geological studies of NWCT tunnel in Iran focusing on the stabilization analysis and design of support: a case study. Scientific Research and Essays, 6 (1). art. no. B4851F416480. pp. 79-97. ISSN 1992-2248

Ghobakhloo, Morteza and Sabouri, Mohammad Sadegh and Tang, Sai Hong and Amirizadeh, Khosro (2011) Electronic commerce‐enabled supply chain process integration and business value. Journal of Systems and Information Technology, 13 (4). pp. 344-368. ISSN 1328-7265; ESSN: 1758-8847

Ghobakhloo, Morteza and Sabouri, Mohammad Sadegh and Tang, Sai Hong and Zulkifli, Norzima (2011) Information technology adoption in small and medium-sized enterprises; an appraisal of two decades literature. Interdisciplinary Journal of Research in Business, 1 (7). pp. 53-80. ISSN 2046-7141

Gholizadeh, Asa and Mohd Soom, Mohd Amin and Abdul Rahim, Anuar and Wayayok, Aimrun (2011) Apparent electrical conductivity in correspondence to soil chemical properties and plant nutrients in soil. Communications in Soil Science and Plant Analysis, 42 (12). pp. 1447-1461. ISSN 0010-3624; ESSN: 1532-2416

Gholizadeh, Asa and Mohd Soom, Mohd Amin and Abdul Rahim, Anuar and Wayayok, Aimrun (2011) Using soil plant analysis development chlorophyll meter for two growth stages to assess grain yield of Malaysian rice (Oryza sativa). American Journal of Agricultural and Biological Sciences, 6 (2). pp. 209-213. ISSN 1557-4989; ESSN: 1557-4997

Gholizadeh, Asa and Mohd Soom, Mohd Amin and Abdul Rahim, Anuar and Wayayok, Aimrun and Saberioon, Mohammad Mehdi (2011) Temporal variability of SPAD chlorophyll meter readings and its relationship to total nitrogen in leaves within a Malaysian paddy field. Australian Journal of Basic and Applied Sciences, 5 (5). pp. 236-245. ISSN 1991-8178

Golestanbagh, M. and Ahamad, Intan Salwani and Idris, Azni and Yunus, Robiah (2011) Effect of storage of shelled Moringa oleifera seeds from reaping time on turbidity removal. Journal of Water and Health, 9 (3). pp. 597-602. ISSN 1477-8920

Golestaneh, Amirreza Fahim and Ali, Aidy and Bayat, Mehdi (2011) Analytical and numerical investigation of fatigue crack growth in aluminum alloy. Key Engineering Materials, 462-463. pp. 1050-1055. ISSN 1013-9826; ESSN: 1662-9795

Golestaneh, Amirreza Fahim and Ali, Aidy and Bayat, Mehdi (2011) Experimental and analytical studies of fatigue crack growth in peened after skimmed friction stir welded joint of 2024-T351 Al alloy. Key Engineering Materials, 462-463. pp. 1212-1217. ISSN 1013-9826; ESSN: 1662-9795

Golestaneh, Seyed Jafar and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Naeini, Hassan Moslemi and Maghsoudi, Ali Asghar (2011) A committee machine approach to multiple response optimization. International Journal of the Physical Sciences, 6 (35). art. no. F8D798124547. pp. 7935-7949. ISSN 1992-1950

Gomes, Chandima (2011) On the selection and installation of surge protection devices in a TT wiring system for equipment and human safety. Safety Science, 49 (6). pp. 861-870. ISSN 0925-7535

Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin (2011) Lightning protection: getting it wrong. IEEE Technology and Society Magazine, 30 (2). pp. 12-21. ISSN 0278-0097; ESSN: 1937-416X

Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin (2011) Protection of naval systems against electromagnetic effects due to lightning. Progress In Electromagnetics Research, 113. pp. 333-349. ISSN 1070-4698; ESSN: 1559-8985

Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin (2011) A theoretical approach to estimate the annual lightning hazards on human beings. Atmospheric Research, 101 (3). pp. 719-725. ISSN 0169-8095; ESSN: 1873-2895

Gomes, Chandima and Diego, Arturo Galvan (2011) Lightning protection scenarios of communication tower sites; human hazards and equipment damage. Safety Science, 49 (10). pp. 1355-1364. ISSN 0925-7535

H'ng, Paik San and Wong, Lih Jiun and Chin, Kit Ling and Tor, Ee Sang and Tan, Shu Ei and Tey, Beng Ti and Maminski, Mariuz (2011) Oil palm (Elaeis guineensis) trunk as a resource of starch and other sugars. Journal of Applied Sciences, 11 (16). pp. 3053-3057. ISSN 1812-5654; ESSN: 1812-5662

Hadi, Agung Efriyo and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Mohd Dahlan, Khairul Zaman and Usman, Mustofa (2011) Optimization of the mechanical properties of abaca fibre-reinforced high impact polystyrene (HIPS) composites using Box-Behnken design of experiments. Polymers and Polymer Composites, 19 (8). pp. 697-710. ISSN 0967-3911; ESSN: 1478-2391

Hadi, Agung Efriyo and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Mohd Dahlan, Khairul Zaman and Usman, Mustofa (2011) Physical properties of abaca (Musa textilis nee) fibre reinforced high impact polystyrene (HIPS) composites. Pertanika Journal of Science & Technology, 19 (2). pp. 349-363. ISSN 0128-7680; ESSN: 2231-8526

Hadi, Agung Efriyo and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Mohd Dahlan, Khairul Zaman and Usman, Mustofa (2011) Study on abaca (Musa textilis Nee) fibre reinforced high impact polystyrene (HIPS) composites by thermogravimetric analysis (TGA). International Journal of Physical Sciences, 6 (8). art. no. A56834F25968. pp. 2100-2106. ISSN 1992-1950

Hameed Sultan, Mohamed Thariq and Worden, K. and Pierce, S. G. and Hickey, D. and Staszewski, W. J. and Dulieu-Barton, J. M. and Hodzic, A. (2011) On Impact Damage Detection and Quantification for CFRP Laminates using Structural Response Data Only. Mechanical Systems and Signal Processing, 25 (8). pp. 3135-3152. ISSN 0888-3270

Hamid, Hussain and Arintono, Sulistyo and Faezi, Seyed Farzin and Davoodi, Seyed Rasoul (2011) Level of service model for exclusive motorcycle lane. Indian Journal of Science and Technology, 4 (4). pp. 387-393. ISSN 0974-6846

Hamid, Hussain and Arintono, Sulistyo and Muniandy, Ratnasamy and Davoodi, Seyed Rasoul (2011) Motorcycle characteristics for sight distance investigation on exclusive motorcycle lanes. Journal of Transportation Engineering, ASCE, 137 (7). pp. 492-495. ISSN 0733-947X

Hamid, Hussain and Faezi, Seyed Farzin and Davoodi, Seyed Rasool (2011) Predicting Speed Model of Horizontal Curves on Exclusive Motorcycle Lane. Australian Journal of Basic and Applied Sciences, 5 (5). pp. 590-598. ISSN 1991-8178

Hamid, Hussain and Radin Sohadi, Radin Umar and Mohd Sadullah, Ahmad Farhan (2011) Establishing Speed-Flow-Density relationships for exclusive motorcycle lanes. Transportation Planning and Technology, 34 (3). pp. 245-257. ISSN 0308-1060

Haris, Mohd Yusoff and Abang Abdul Majid, Dayang Laila and Zainudin, Edi Syams and Mustapha, Faizal and Zahari, Rizal and Halim, Zahurin (2011) Preliminary review of biocomposites materials for aircraft radome application. Key Engineering Materials, 471-472. pp. 563-567. ISSN 1013-9826; ESSN: 1662-9795

Harun, Razif and Danquah, Michael K. (2011) Influence of acid pre-treatment on microalgal biomass for bioethanol production. Process Biochemistry, 46 (1). pp. 304-309. ISSN 1359-5113; ESSN: 1873-3298

Harun, Razif and Davidson, Michael and Doyle, Mark and Gopiraj, Rajprathab and Danquah, Michael K. and Forde, Gareth M. (2011) Technoeconomic analysis of an integrated microalgae photobioreactor, biodiesel and biogas production facility. Biomass and Bioenergy, 35 (1). pp. 741-747. ISSN 0961-9534; ESSN: 1873-2909

Harun, Razif and Jason, W. S. Y. and Cherrington, Tamara and Danquah, Michael K. (2011) Exploring alkaline pre-treatment of microalgal biomass for bioethanol production. Applied Energy, 88 (10). pp. 3464-3467. ISSN 0306-2619; ESSN: 1872-9118

Hasan, Ahmed Mudheher and Samsudin, Khairulmizam and Ramli, Abdul Rahman (2011) A novel intelligent predictor for low-rate global positioning system (GPS) system. Scientific Research and Essays, 6 (11). art. no. 46BBC2C21789. pp. 2348-2359. ISSN 1992-2248

Hasan, Ahmed Mudheher and Samsudin, Khairulmizam and Ramli, Abdul Rahman and Raja Abdullah, Raja Syamsul Azmir (2011) Automatic estimation of inertial navigation system errors for global positioning system outage recovery. Journal of Aerospace Engineering, 225 (1). pp. 86-96. ISSN 0954-4100; ESSN: 2041-3025

Hasan, Ahmed Mudheher and Samsudin, Khairulmizam and Ramli, Abdul Rahman (2011) Optimizing of ANFIS for estimating INS error during GPS outages. Journal of the Chinese Institute of Engineers, 34 (7). pp. 967-982. ISSN 0253-3839; ESSN:2158-7299

Hassan, Mohd Khair and Abdul Rahman, Ribhan Zafira and Che Soh, Azura and Ab Kadir, Mohd Zainal Abidin (2011) Lightning strike mapping for Peninsular Malaysia using artificial intelligence techniques. Journal of Theoretical and Applied Information Technology, 34 (2). pp. 202-214. ISSN 1992-8645; ESSN: 1817-3195

Hassan, Mohd Khair and K., Aishwarya and Abdul Rahman, Ribhan Zafira and Ahmad, Siti Anom (2011) Design a PID controller for a constant speed of combustion engine. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 1586-1593. ISSN 1991-8178

Hezarjaribi, Yadollah and Hamidon, Mohd Nizar and Mohd Sidek, Roslina and Hossein, Keshmiri and Raja Abdullah, Raja Syamsul Azmir and Bahadorimehr, Alireza (2011) Evaluation for diaphragm's deflection for touch mode MEMS pressure sensors. The International Arab Journal of Information Technology, 8 (2). pp. 141-146. ISSN 1683-3198

Hitam, Salasiah and Tan, Kah Lin and Sahbudin, Ratna Kalos Zakiah and Mokhtar, Makhfudzah and Ahmad Anas, Siti Barirah and Sali, Aduwati (2011) Digital visual schedule and training system for centre of autistic children. Journal of Applied Sciences, 11 (5). pp. 788-796. ISSN 1812-5654; ESSN: 1812-5662

Hojabri, Mojgan and Hizam, Hashim and Mariun, Norman and Aris, Ishak and Akorede, Mudathir Funsho (2011) Critical lines identification for ATC assessment in power system planning. International Review of Electrical Engineering, 6 (4). pp. 1776-1782. ISSN 1827-6660; ESSN: 1827-6679

Homayouni, Seyed Mahdi and Tang, Sai Hong and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar (2011) Using simulated annealing algorithm for optimization of quay cranes and automated guided vehicles scheduling. International Journal of Physical Sciences, 6 (27). pp. 6286-6294. ISSN 1992-1950

Hosseinabadi, Reza Afshar and Ali, Aidy and Sahari, Barkawi and Bayat, Mehdi (2011) Auto adjust masses of automotive structures with desired centre of gravity. Key Engineering Materials, 462-463. pp. 812-816. ISSN 1013-9826; ESSN: 1662-9795

Hosseini, Majid and Mohd Soom, Mohd Amin and Ghafouri, Abdul Mohammed and Tabatabaei, Mahmoud Reza (2011) Application of soil and water assessment tools model for runoff estimation. American Journal of Applied Sciences, 8 (5). pp. 486-494. ISSN 1546-9239; ESSN: 1554-3641

Hosseini, Soraya and Khan, Moonis Ali and Malekbala, Mohamad Rasool and Cheah, Willie and Choong, Thomas Shean Yaw (2011) Carbon coated monolith, a mesoporous material for the removal of methyl orange from aqueous phase: adsorption and desorption studies. Chemical Engineering Journal, 171 (3). pp. 1124-1131. ISSN 1385-8947; ESSN: 1873-3212

Hussain, Ghasan Ali and Mokhtar, Makhfudzah and Raja Abdullah, Raja Syamsul Azmir (2011) Concatenated RS-convolutional codes for MIMO-OFDM system. Asian Journal of Applied Sciences, 4 (7). pp. 720-727. ISSN 1996-3343

Hussain, Siti Aslina and Abdullah, Norhafizah and Rosly, Mohd Imran (2011) Numerical method on drug release from Nanoparticles using CFD. Journal of Nano Research, 13. pp. 61-68. ISSN 1662-5250

Hussein, Basheer Noaman and Sulaiman, Nasri and Raja Ahmad, Raja Mohd Kamil and Marhaban, Mohammad Hamiruce and Ali, Hazem I. (2011) H_infinity controller design to control the single axis magnetic levitation system with parametric uncertainty. Journal of Applied Sciences, 11 (1). pp. 66-75. ISSN 1812-5654; ESSN: 1812-5662

Hussein, Yaseein Soubhi and Mohd Ali, Borhanuddin and Varahram, Pooria and Sali, Aduwati (2011) Enhanced handover mechanism in long term evolution (LTE) networks. Scientific Research and Essays, 6 (24). art. no. 2B831F132298. pp. 5138-5152. ISSN 1992-2248

Hussein, Zinah Rajab and O. K. Rahmat, Rahmita Wirza and Abdullah, Lili Nurliyana and Saripan, M. Iqbal and Dimon, Mohd Zamrin (2011) Contour extraction of echocardiographic images based on pre-processing. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012042. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Ibraheem, Sameer Adnan and Ali, Aidy and Abdan, Khalina (2011) Development of green insulation boards from kenaf fibres and polyurethane. Polymer-Plastics Technology and Engineering, 50 (6). pp. 613-621. ISSN 0360-2559; ESSN: 1525-6111

Ibraheem, Sameer Adnan and Ali, Aidy and Abdan, Khalina (2011) Development of green insulation boards from kenaf fibres part 1: development and characterization of mechanical properties. Key Engineering Materials, 462-463. pp. 1343-1348. ISSN 1013-9826; ESSN: 1662-9795

Ibraheem, Sameer Adnan and Ali, Aidy and Abdan, Khalina (2011) Development of green insulation boards from kenaf fibres part 2: characterizations of thermal and water absorption. Key Engineering Materials, 462-463. pp. 1331-1336. ISSN 1013-9826; ESSN: 1662-9795

Ibrahim, Mohd Shukri and Abdul Aziz, Faieza and Salit, Mohd Sapuan and Mohd Tahir, Suraya (2011) Effect of filler loading and coupling agent on tensile and impact properties of polypropylene with oil palm ash composites. Key Engineering Materials, 471-472. pp. 1130-1135. ISSN 1013-9826; ESSN: 1662-9795

Isa, Maryam and Basri, Shahnor and Hambali, Zarida and Bahraminejad, Behzad (2011) Hydrogen detection in organic gas mixtures based on analyzing the transient response. Sensor review - Emerald in Sight, 31 (1). pp. 26-31. ISSN 0260-2288

Ishola, Tajudeen Abiodun and Oni, Kayode Carroll and Yahya, Azmi and Abubakar, Mohammed Shu'aibu (2011) Development and testing of a Prosopis africana pod thresher. Australian Journal of Basic and Applied Sciences, 5 (5). pp. 759-767. ISSN 1991-8178

Ismail, Napsiah and Ng, S. C. (2011) Reconstruction of the 3D Object Model: A review. SEGi Review, 4 (2). pp. 18-30. ISSN 1985-5672

Ismail, Sabarina and Ng, Chee Kyun and Noordin, Nor Kamariah and Sali, Aduwati and Mohd Ali, Borhanuddin (2011) Review of interference avoidance schemes in femtocell networks. Scientific Research and Essays, 6 (15). art. no. 79C87A624263. pp. 3261-3271. ISSN 1992-2248

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima (2011) Evaluation of electromagnetic fields associated with inclined lightning channel using second order FDTD-hybrid methods. Progress In Electromagnetics Research, 117. pp. 209-236. ISSN 1070-4698; ESSN: 1559-8985

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Wan Ahmad, Wan Fatinhamamah (2011) Analytical field expressions due to inclined lightning channel. Przeglad Elektrotechniczny (Electrical Review), 2011 (11). pp. 277-280. ISSN 0033-2097; ESSN: 2449-9544

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Wan Ahmad, Wan Fatinhamamah (2011) Evaluation of the electromagnetic fields due to lightning channel with respect to the striking angle. International Review of Electrical Engineering, 6 (2). pp. 1013-1023. ISSN 1827-6660; ESSN: 1827-6679

Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah and Hejazi, Farzad and Kojouri, Samira Jilani and Chieng, C. Y. and Noorzaei, Jamaloddin (2011) Effect of soft story on structural response of high rise buildings. IOP Conference Series: Materials Science and Engineering, 17 (1). ISSN 1757-8981

Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah and Noorzaei, Jamaloddin and Ghatee, Peyman and Ibrahim, Azmi (2011) Plain concrete linearized stiffness diminution modeling subjected to different stresses-srain relationship models. IOP Conference Series: Materials Science and Engineering, 17 (1). 012037. ISSN 1757-8981

Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah and Noorzaei, Jamaloddin and Hejazi, Farzad and Dalili, Mohammad S. and Thanoon, Waleed Abdulmalik (2011) Seismic response evaluation of RC tower connected to short rigid buildings. Key Engineering Materials, 462-46 (-). pp. 569-575. ISSN 1013-9826

Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah and Noorzaei, Jamaloddin and Hejazi, Farzad and Kojouri, Samira Jilani and Thanoon, Waleed Abdulmalik (2011) Inelastic seismic response of RC building with control system. Key Engineering Materials, 462-463. pp. 241-246. ISSN 1013-9826

Jaafar, Mohd Saleh and Abdul Kadir, Mohd Razali and Safiee, Nor Azizi and Noorzaei, Jamaloddin and Alwathaf, Ahmed Hasan (2011) Structural behavior of mortarless interlocking load bearing hollow block wall panel under out-of-plane loading. Advances in Structural Engineering, 14 (6). pp. 1185-1195. ISSN 1369-4332

Jaafar, Mohd Saleh and Muhammad Rashid, Raizal Saifulnaz and Kohnehpooshi, Omid and Abdulrazeg, Aeid Ali and Noorzaei, Jamaloddin (2011) 3D numerical models for reinforced concrete components. IOP Conference Series: Materials Science and Engineering, 17 (1). 012036. ISSN 1757-9881

Jaafar, Mohd Saleh and Muhammad Rashid, Raizal Saifulnaz and Kohnehpooshi, Omid and Noorzaei, Jamaloddin (2011) Three Dimensional Finite Element Simulation of Reinforced Concrete Beams Post-tensioned in Shear Region. KSCE Journal of Civil Engineering, 15 (6). pp. 1081-1090. ISSN 1226-7988

Jaafar, Mohd Saleh and Muhammad Rashid, Raizal Saifulnaz and Kohnehpooshi, Omid and Noorzaei, Jamaloddin (2011) A new 3D interface element for three dimensional finite element analysis of FRP strengthened RC beams. Interaction and Multiscale Mechanics, 4 (4). pp. 257-271. ISSN 1976-0426

Jaafar, Mohd Saleh and Noorzaei, Jamaloddin and Abdulrazeg, Aeid Ali and Khanehzaie, P. and Mohammed, Thamer Ahmed and Thanoon, Waleed Abdulmalik (2011) Cracking safety evaluation of massive concrete structures. Key Engineering Materials, 462-463. pp. 1403-1408. ISSN 1013-9826

Jaafar, Mohd Saleh and Noorzaei, Jamaloddin and Jameel, Mohammed and Seyed Hakim, Seyed Jamalaldin and Mohammadhassani, Mohammad (2011) Application of artificial neural networks to predict compressive strength of high strength concrete. International Journal of Physical Sciences, 6 (5). art. no. 64E466B26591 . pp. 975-981. ISSN 1992-1950

Jaafar, Mohd Saleh and Noorzaei, Jamaloddin and Pour, P. Moradi and Karisiddappa, (2011) A comparative study between codes of spectrum for a single degree of freedom (sdof) system in two different hazardous regions. IOP Conference Series: Materials Science and Engineering, 17 (1). 012033. ISSN 1757-8981

Jaafar, Mohd Saleh and Noorzaei, Jamaloddin and Thanoon, Waleed Abdulmalik and Abdulrazeg, Aeid Ali and Kohnehpooshi, Omid (2011) Soil structure interaction for integral abutment bridge using spring analogy approach. IOP Conference Series: Materials Science and Engineering, 17 (1). 012035. ISSN 1757-8981

Jaafar, Mohd Saleh and Noorzaei, Jamaloddin and Thanoon, Waleed Abdulmalik and Yardim, Yavuz (2011) Structural response of interlocking composite masonry slab. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 164 (6). pp. 409-420. ISSN 0965-0911

Jabir, Amjad Najim and Khatun, Sabira and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin (2011) A lower complexity K best algorithm for multiple input and multiple output detection. Scientific Research and Essays, 6 (24). art. no. 2B09CE032140. pp. 5114-5121. ISSN 1992-2248

Jadda, Mehrnoosh and Mohd Shafri, Helmi Zulhaidi and Mansor, Shattri (2011) PFR model and GiT for landslide susceptibility mapping: a case study from Central Alborz, Iran. Natural Hazards, 57 (2). pp. 395-412. ISSN 0921-030X; ESSN: 1573-0840

Jafari , S.A. and Mashohor , Syamsiah and Varnamkhasti, M. Jalali (2011) Committee neural networks with fuzzy genetic algorithm. Journal of Petroleum Science and Engineering, 76 (3-4). pp. 217-233. ISSN 0920-4105

Jahan, Ali and Mustapha, Faizal and Ismail, Mohd Yusuf and Salit, Mohd Sapuan and Bahraminasab, Marjan (2011) A comprehensive VIKOR method for material selection. Materials and Design, 32 (3). pp. 1215-1221. ISSN 0261-3069

Jahangirian, Hossein and Haron, Md. Jelas and Yusof, Nor Azah and Silong, Sidik and Kassim, Anuar and Rafiee Moghaddam, Roshanak and Peyda, Mazyar and Gharayebi, Yadollah (2011) Enzymatic synthesis of fatty hydroxamic acid derivatives based on palm kernel oil. Molecules, 16 (8). pp. 6634-6644. ISSN 1420-3049; ESSN:1420-3049

Jahari, Mahirah and Bejo, Siti Khairunniza and Mohamed Shariff, Abdul Rashid and Mohd Shafri, Helmi Zulhaidi (2011) Change detection studies in Matang Mangrove Forest area, Perak. Pertanika Journal of Science & Technology, 19 (2). pp. 307-327. ISSN 0128-7680; ESSN: 2231-8526

Jalaluddin, Mai Nursherida and Sahari, Barkawi and Abdul Aziz, Nuraini (2011) Parametric study of automotive composite bumper beams subjected to frontal impacts. Key Engineering Materials, 471-472. pp. 484-489. ISSN 1013-9826; ESSN: 1662-9795

James Jayaselan, Helena Anusia and Ahmad, Desa (2011) Development of a mechanization selection system for oil palm plantations with alternative planting patterns. Journal of Oil Palm Research, 23 (1). pp. 990-998. ISSN 1511-2780

Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin (2011) Static power system security assessment via artificial neural network. Journal of Theoretical and Applied Information Technology, 31 (2). pp. 119-128. ISSN 1992-8645

Jasni, Jasronita and Jordehi, A. Rezaee (2011) A comprehensive review on methods for solving FACTS optimization problem in power systems. International Review of Electrical Engineering, 6 (4). pp. 1916-1926. ISSN 1827-6660

Jonoobi, Mehdi and Harun, Jalaluddin and Md. Tahir, Paridah and Alireza, Shakeri and Osman Al-Edrus, Syeed Saifulazry and Makinejad, Majid Davoodi (2011) Physicochemical characterization of pulp and nanofibers from kenaf stem. Materials Letters, 65 (7). pp. 1098-1100. ISSN 0167-577X; ESSN: 1873-4979

Joseph, Narcisse M. S. and Tey, Beng Ti and Tan, Chon Seng and Shafee, Norazizah and Tan, Wen Siang (2011) Production of long helical capsid of Nipah virus by Pichia pastoris. Process Biochemistry, 46 (9). pp. 1871-1874. ISSN 1359-5113; ESSN: 1873-3298

K. S., Mohd Taha and Ali, Salmiaton and Sobri, Shafreeza (2011) Concentration profile behavioral from digestate television printed circuit board for metal recovery via electrolysis. Journal of Applied Sciences, 11 (13). pp. 2436-2439. ISSN 1812-5654; ESSN: 1812-5662

Kalani, Mahshid and Yunus, Robiah (2011) Application of supercritical antisolvent method in drug encapsulation: a review. International Journal of Nanomedicine, 6. pp. 1429-1442. ISSN 1176-9114; ESSN: 1178-2013

Kalani, Mahshid and Yunus, Robiah and Abdullah, Norhafizah (2011) Optimizing supercritical antisolvent process parameters to minimize the particle size of paracetamol nanoencapsulated in L-polylactide. International Journal of Nanomedicine, 6. pp. 1101-1105. ISSN 1176-9114; ESSN: 1178-2013

Kalantari, Behzad and Prasad, Arun and Kim Huat, Bujang (2011) Stabilising peat soil with cement and silica fume. Geotechnical Engineering, 164 (1). pp. 33-39. ISSN 1353-2618; ESSN: 1751-8563

Kamarudin, Siti Hasnah and Abdan, Khalina and Ali, Aidy and Sharif, Jamaliah (2011) The effect of EVA on composite that made of PP nanoclay. Key Engineering Materials, 462-463. pp. 925-930. ISSN 1013-9826; ESSN: 1662-9795

Karim, Roselina and Chin, Nyuk Ling and Mohd Ghazali, Hasanah and Shakerardekani, Ahmad (2011) Types of dryers and their effect on the pistachio nuts quality - A Review. Journal of Agricultural Science, 3 (4). pp. 13-18. ISSN 1916-9760

Karmegam, Karuppiah and Salit, Mohd Sapuan and Ismail, Md Yusof and Ismail, Napsiah and Mohd Tamrin, Shamsul Bahri and Shuib, S. and Krishnan, G. Mohana and Palanimuthu, Seetha and Tamilmoli, P. and Mohd Jusoh, Mohd Hanapi (2011) Anthropometric study among adults of different ethnicity in Malaysia. International Journal of Physical Sciences, 6 (4). pp. 777-788. ISSN 1992-1950

Karuppiah, Karmegam and Salit, Mohd Sapuan and Ismail, Mohd Yusof and Ismail, Napsiah and Mohd Tamrin, Shamsul Bahri (2011) Conceptual design of motorcycle's lumbar support using motorcyclists' anthropometric characteristics. Maejo International Journal of Science and Technology, 5 (1). pp. 69-82. ISSN 1905-7873; ESSN: 2697-4746

Karuppiah, Karmegam and Salit, Mohd Sapuan and Ismail, Mohd Yusof and Ismail, Napsiah and Mohd Tamrin, Shamsul Bahri and Gobalakrishnan, Mohana Krishnan and Palanimuthu, Seetha and Palaniandy, Thiyagu (2011) Anthropometry of Malaysian young adults. Journal of Human Ergology, 40 (1-2). pp. 37-46. ISSN 0300-8134; ESSN: 1884-3964

Kazemian, Sina and Kim Huat, Bujang and Mohammed, Thamer Ahmed and Abdul Aziz, Farah Nora Aznieta and Moayedi, Hossein and Barghchi, Maassoumeh (2011) Influence of peat characteristics on cementation and pozzolanic reactions in the dry mixing method. Arabian Journal for Science and Engineering, 36 (7). pp. 1189-1202. ISSN 1319-8025; ESSN: 2191-4281

Kazemian, Sina and Kim Huat, Bujang and Prasad, Arun and Barghchi, Maassoumeh (2011) A state of art review of peat: geotechnical engineering perspective. International Journal of the Physical Sciences, 6 (8). art. no. 046C07225431. pp. 1974-1981. ISSN 1992-1950

Kazemian, Sina and Prasad, Arun and Ghiasi, Vahed and Kim Huat, Bujang (2011) Effect of cement on compressibility and microstructure of tropical peat. Advanced Materials Research, 261-263. pp. 33-37. ISSN 1022-6680; ESSN: 1662-8985

Kazemian, Sina and Prasad, Arun and Kim Huat, Bujang and Bazaz, Jafar Bolouri and Mohammed, Thamer Ahmed and Abd. Aziz, Farah Nora Aznieta (2011) Effect of aggressive pH media on peat treated by cement and sodium silicate grout. Journal of Central South University of Technology, 18 (3). pp. 840-847. ISSN 1005-9784; ESSN: 1993-0666

Keshvadi, Afshin and Endan, Johari and Harun, Haniff and Ahmad, Desa and Taip, Farah Saleena (2011) The effect of surface color on palm oil quality during the ripening process of fresh fruits. Journal of Food, Agriculture and Environment, 9 (3&4). pp. 61-67. ISSN 1459-0255; ESSN: 1459-0263

Keykha, Hamed A. and Kim Huat, Bujang (2011) Determination rock quality designation RQD basis on joints. Electronic Journal of Geotechnical Engineering, 16 (bund. E). pp. 522-526. ISSN 1089-3032

Keykha, Hamed A. and Kim Huat, Bujang and Moayedi, Hossein (2011) The significance of using horizontal directional drilling in utility services. Electronic Journal of Geotechnical Engineering, 16 (bund. F). pp. 709-715. ISSN 1089-3032

Kim Huat, Bujang and A. Keykha, Hamed and Asadi, Afshin and Moayedi, Hossein (2011) The effects of discontinuities on stability of rock blocks in tunnel. International Journal of the Physical Sciences, 6 (31). pp. 7132-7138. ISSN 1992-1950

Kim Huat, Bujang and Kazemian, Sina and Prasad, Arun and Barghchi, Maassoumeh (2011) State of an art review of peat: general perspective. International Journal of Physical Sciences, 6 (8). pp. 1988-1996. ISSN 1992-1950

Kim Huat, Bujang and Kazemian, Sina and Prasad, Arun and Barghchi, Maassoumeh (2011) A study of the compressibility behavior of peat stabilized by DMM: lab model and FE analysis. Scientific Research and Essays, 6 (1). art. no. 98A4E5B17609. pp. 196-204. ISSN 1992-2248

Kim Huat, Bujang and Kazemian, Sina and Wong, Lit Kuang (2011) Effect of cement-sodium silicate grout and kaolinite on undrained shear strength of reinforced peat. Electronic Journal of Geotechnical Engineering, 16 (bund. K). pp. 1221-1228. ISSN 1089-3032

Kim Huat, Bujang and M. Mekkiyah, Haider and M. A., Malek and Dis, Mohd Noor (2011) Effect of Mixing Fine Sand on the Drained Shear Strength of Completely Decomposed Granite Soil. International Journal of GEOMATE, 1 (1). pp. 10-18. ISSN 2186-2982

Kim Huat, Bujang and Mafian, Sasan and Kazemian, Sina and Barghchi, Maassoumeh (2011) Assessment of indigenous plants for live pole applications in slope stability of Malaysia. Australian Journal of Basic and Applied Sciences, 5 (9). pp. 22-27. ISSN 1991-8178

Kim Huat, Bujang and Moayedi, Hossein and Asadi, Afshin and Kazemian, Sina and Keykha, Hamed A. (2011) Sensitivity analysis of slopes affected by possible earthquake loading and heavy rainfall: case study. International Journal of Physical Sciences, 6 (19). pp. 4649-4655. ISSN 1992-1950

Kim Huat, Bujang and Moayedi, Hossein and Moayedi, Fatemeh and Asadi, Afshin and Mohammad Ali, Thamer Ahmad (2011) Groundwater quality assessment of Labuan Island using GIS. Electronic Journal of Geotechnical Engineering, 16 (bund. E). pp. 463-476. ISSN 1089-3032

Koay, Gregory Feng Ling and Chuah, Teong Guan and Zainal Abidin @ Murad, Sumaiya and Ahmad, Salmiah and Choong, Thomas Shean Yaw (2011) Solvent crystallization of palm based dihydroxystearic acid with isopropyl alcohol: effects of solvent quantity and concentration on particle size distribution, crystal habit and morphology, and resultant crystal purity. Industrial Crops and Products, 34 (1). pp. 1135-1140. ISSN 0926-6690; ESSN: 1872-633X

Koay, Gregory Feng Ling and Chuah, Teong Guan and Zainal Abidin@Murad, Sumaiya and Ahmad, Salmiah and Choong, Thomas Shean Yaw (2011) Development, characterization and commercial application of palm based dihydroxystearic acid and its derivatives: an overview. Journal of Oleo Science, 60 (5). pp. 237-265. ISSN 1345-8957; ESSN: 1347-3352

Koh, May Ying and Mohd Ghazi, Tinia Idaty (2011) A review of biodiesel production from Jatropha curcas L. oil. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2240-2251. ISSN 1364-0321; ESSN: 1879-0690

Kohnehpooshi, Omid and Noorzaei, Jamaloddin and Jaafar, Mohd Saleh and Muhammad Rashid, Raizal Saifulnaz (2011) Development of a special interface element between brick and plate bending elements. Procedia Engineering, 14. pp. 734-742. ISSN 1877-7058

Langarizadeh, Mostafa and Mahmud, Rozi and Ramli, Abd. Rahman and Napis, Suhaimi and Beikzadeh, Mohammad Reza and Wan Abdul Rahman, Wan Eny Zarina (2011) Effects of image processing techniques on mammographic phantom images: a pilot study. Pertanika Journal of Science & Technology, 19 (1). pp. 67-76. ISSN 0128-7680; ESSN: 2231-8526

Lau, Fui Fui and Taip, Farah Saleena (2011) Effects of different operating parameters in papaya halwa drying. Pertanika Journal of Science & Technology, 19 (2). pp. 389-396. ISSN 0128-7680; ESSN: 2231-8526

Law, Teik Hua and Noland, Robert B. and Evans, Andrew W. (2011) The sources of the Kuznets relationship between road fatalities and economic growth. Journal of Transport Geography, 19 (2). pp. 355-365. ISSN 0966-6923; ESSN: 1873-1236

Lee, Hwei Voon and Yunus, Robiah and Juan, Joon Ching and Yap, Taufiq Yun Hin (2011) Process optimization design for jatropha-based biodiesel production using response surface methodology. Fuel Processing Technology, 92 (12). pp. 2420-2428. ISSN 0378-3820; ESSN: 1873-7188

Lee, Teang Shui and Nazemi, Allahyar and M. H., Davioudi (2011) Friction Coefficient (F)-Reynolds Number (Re) Relationship in non-cohesive suspended sediment laden flow through pervious rockfill dam. Research Journal of Environmental Sciences, 5 (7). pp. 674-681. ISSN 1819-3412

Leman, Zulkiflle and Salit, Mohd Sapuan (2011) Effects of Impregnation Pressure on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres. Key Engineering Materials, 471-47 (2011). pp. 1153-1158. ISSN 1662-9795

Leman, Zulkiflle and Salit, Mohd Sapuan (2011) Effects of Impregnation Time on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres. Key Engineering Materials, 471-47 (2011). pp. 1147-1152. ISSN 1662-9795

Leman, Zulkiflle and Salit, Mohd Sapuan and S., Suppiah (2011) Sugar Palm Fibre-Reinforced Unsaturated Polyester Composite Interface Characterisation by Pull-Out Test. Key Engineering Materials, 471-47 (2011). pp. 1034-1039. ISSN 1013-9826

Lim, S. D. and Yusof, Yus Aniza and Chin, Nyuk Ling and A. Talib, Rosnita and Endan, Johari and Aziz, M. G. (2011) Effect of extraction parameters on the yield of betacyanins from pitaya fruit (Hylocereus polyrhizus) pulps. Journal of Food, Agriculture and Environment, 9 (2). pp. 158-162. ISSN 1459-0255; ESSN: 1459-0263

Lutfy, Omar F. and Mohd Noor, Samsul Bahari and Marhaban, Mohammad Hamiruce (2011) A simplified adaptive neuro-fuzzy inference system (ANFIS) controller trained by genetic algorithm to control nonlinear multi-input multi-output systems. Scientific Research and Essays, 6 (31). art. no. 5196FB832036. pp. 6475-6486. ISSN 1992-2248

Lutfy, Omar Farouq and Mohd Noor, Samsul Bahari and Marhaban, Mohammad Hamiruce and Abbas, Kassim Ali (2011) Non-linear modelling and control of a conveyor-belt grain dryer utilizing neuro-fuzzy systems. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 225 (5). pp. 611-622. ISSN 0959-6518; ESSN: 2041-3041

M. Sayuti and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Vijayaram, Thoguluva Raghavan and Sulaiman, Suraya (2011) Influence of mechanical vibration moulding process on the tensile properties of TiC reinforced LM6 alloy composite castings. Applied Mechanics and Materials, 66-68. pp. 1207-1212. ISSN 1660-9336; ESSN: 1662-7482

M. Sayuti and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Sulaiman, Suraya and Esmaeilian, Gholamreza (2011) Mechanical vibration technique for enhancing mechanical properties of particulate reinforced aluminium alloy matrix composite. Key Engineering Materials, 471-472. pp. 721-726. ISSN 1013-9826; ESSN: 1662-9795

M. Sayuti and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Vijayaram, Thoguluva Raghavan and Sulaiman, Suraya (2011) Effect of quartz-silicon dioxide particulate on tensile properties of aluminium alloy cast composites. Key Engineering Materials, 471-472. pp. 727-732. ISSN 1013-9826; ESSN: 1662-9795

Mahdi, Mohd Adzir and Hitam, Salasiah and Ahmad Hambali, Nor Azura Malini and Al-Mansoori, Mohammed Hayder and Ajiya, Mohammed and A. Bakar, Ahmad Ashrif (2011) Multiwavelength Brillouin-Raman ring-cavity fiber laser with 22-GHz spacing. Laser Physics, 21 (9). pp. 1656-1660. ISSN 1054-660X

Mahdi, Mohd Adzir and Hizam, Hashim and Mohd Noor, Samsul Bahari and Ramzia Salem, Abduemalik and Abu Bakar, Muhammad Hafiz and Al-Mansoori, Mohammed Hayder (2011) Multiwavelength L-band fiber laser with bismuth-oxide EDF and photonic crystal fiber. Applied Physics B: Lasers and Optics, 103 (2). pp. 363-368. ISSN 0946-2171

Mahdi, Mohd Adzir and Zakaria, Azmi and Abd. Wahab, Zaidan and Sarmani, A. R. and Abu Bakar, M. H. (2011) Tunable Raman fiber laser induced by Rayleigh backscattering in an ultra-long cavity. Journal of the European Optical Society - Rapid publications, 6 (11043). pp. 1-4. ISSN 1990-2573

Mahdi, Mohd Adzir and Zamzuri, A.K. and Ismail, U.S. and Al-Mansoori, M.H. (2011) All-optical wavelength conversion based on degenerate four-wave mixing in Raman ring laser. Laser Physics Letter, 8 (1). pp. 62-65. ISSN 1612-2011; ESSN:1612-202X

Mahmoodian, Sayed Hamid and Marhaban, Mohammad Hamiruce and Abdul Rahim, Raha and Rosli, Rozita and Saripan, M. Iqbal (2011) Using fuzzy association rule mining in cancer classification. Australasian Physical & Engineering Sciences in Medicine, 34 (1). pp. 41-54. ISSN 0158-9938; ESSN: 1879-5447

Mahmud, Ahmad Rodzi and Al-Hader, Mahmoud and Ahmad, Noordin (2011) Mobile laser scanning, for monitoring polythylene city infrastructure network. Journal of Geography and Regional Planning, 4 (6). art. no. 8FF0D9F40849. p. 6. ISSN 1435-5949

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Ahmad, Desa and Ali, Aidy and Abdan, Khalina and Jonoobi, Mehdi (2011) Concept selection of car bumper beam with developed hybrid bio-composite material. Materials & Design, 32 (10). pp. 4857-4865. ISSN 0261-3069

Malek Abd Rashid, Sorayya Bibi Malek and Salleh, Aishah and Baba, Mohd Sapiyan and Syed Ahmad Abdul Rahman, Sharifah Mumtazah (2011) A self organizing map (SOM) guided rule based system for freshwater tropical algal analysis and prediction. Scientific Research and Essays, 6 (25). art. no. 1179EBA40193. pp. 5279-5284. ISSN 1992-2248

Mansor, Hasmah and Mohd Noor, Samsul Bahari and Raja Ahmad, Raja Mohd Kamil and Taip, Farah Saleena (2011) Design procedure of robust QFT-based controller for continuous-flow grain dryer plant. Advanced Materials Research, 328-330. pp. 2318-2323. ISSN 1022-6680; ESSN: 1662-8985

Mansor, Hasmah and Mohd Noor, Samsul Bahari and Raja Ahmad, Raja Mohd Kamil and Taip, Farah Saleena (2011) Online quantitative feedback theory (QFT) -based self-tuning controller for grain drying process. Scientific Research and Essays, 6 (31). art. no. 4DB49DF32223. pp. 6520-6534. ISSN 1992-2248

Mansor, Shattri and Mahmud, Ahmad Rodzi and Billa, Lawal (2011) Pre-flood inundation mapping for flood early warning. Journal of Flood Risk Management, 4 (4). pp. 318-327. ISSN 0143-1161

Mansor, Shattri and Mahmud, Ahmad Rodzi and Kim Huat, Bujang and Ismail, Samy (2011) Geotechnical modeling of fractures and cavities that are associated with geotechnical engineering problems in Kuala Lumpur limestone, Malaysia. Environmental Earth Sciences, 62 (1). pp. 61-68. ISSN 1866-6299

Maringgal, Bernard and Abdan, Khalina and Ali, Aidy and Janius, Rimfield and Faizal, Muhammad and Kamaruddin, Siti (2011) Optimization of compression moulding temperature for polypropylene materials. Materials Testing, 53 (5). pp. 280-284. ISSN 0025-5300

Mariun, Norman and Ab Kadir, Mohd Zainal Abidin and Karami, Mehdi (2011) On the Application of heuristic Method and Saddle Node Bifurcation for Optimal Placement of FACTS Devices in Power System. International Review of Electrical Engineering, 6 (7). pp. 3185-3195. ISSN 1827-6660

Mariun, Norman and Marhaban, Mohammad Hamiruce and Misron, Norhisam and Mehrjou, Mohammad Rezazadeh (2011) Rotor fault condition monitoring techniques for squirrel-cage induction machine-A review. Mechanical Systems and Signal Processing, 25 (8). pp. 2827-2848. ISSN 0888-3270

Mashohor, Syamsiah and Ramli, Abdul Rahman and Mahmud, Rozi and Farzan, Ali (2011) Discriminant analysis of intermediate brain atrophy rates in longitudinal diagnosis of Alzheimer's disease. Diagnostic Pathology, 6 (105). pp. 1-9. ISSN 1746-1596

Mat Said, Aini and Ahmadun, Fakhru'l-Razi and Mahmud, Ahmad Rodzi and Abas, Fuad (2011) Community preparedness for tsunami disaster: a case study. Disaster Prevention and Management, 20 (3). pp. 266-280. ISSN 0965-3562; ESSN: 1758-6100

Mazlomi, Aliakbar and Mohd Yusuff, Rosnah (2011) Development of a model for technology strategy elaboration. International Journal on Computer Science and Engineering, 3 (2). pp. 519-527. ISSN 2229-5631; ESSN: 0975-3397

Mazlomi, Aliakbar and Mohd Yusuff, Rosnah (2011) On the use of MCDM technique for identifying key technology: a case of auto company. International Journal on Computer Science and Engineering, 3 (2). pp. 528-539. ISSN 2229-5631; ESSN: 0975-3397

Mazlomi, Aliakbar and Mohd Yusuff, Rosnah (2011) The role of ethics in the process of technology transfer and development of 206 Peugeot. International Journal on Computer Science and Engineering, 3 (2). pp. 540-553. ISSN 2229-5631; ESSN: 0975-3397

Md Yusoff, Zainuddin and Mohammed, Thamer Ahmed and A. Keykha, Hamed (2011) Kinematic analysis of blocks in tunnel on the basis of discontinuities. The Electronic Journal of Geotechnical Engineering, 16 (E). 513 -520. ISSN 1089-3032

Mehdi, Omer H. and Abdul Wahab, Noor Izzri and Mohammad K. Abd, (2011) Fast prediction of voltage stability index based on radial basis function neural network: Iraqi super grid network, 400-kV. Modern Applied Science, 5 (4). pp. 190-199. ISSN 1913-1844; ESSN: 1913-1852

Mirzaei, Majid and Sohrabi, Teymour and Jahanbania, Heerbod and Faghih, Mina and Lee, Teang Shui (2011) Evaluation of evapotranspiration coefficient and daily crop reference evapotranspiration in a semi-arid region based on field water balance and FAO method. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 1850-1856. ISSN 1991-8178

Mirzaei, Maryam and Ab Kadir, Mohd Zainal Abidin and Hizam, Hashim and Moazami, Ehsan (2011) Comparative analysis of probabilistic neural network, radial basis function, and feed-forward neural network for fault classification in power distribution systems. Electric Power Components and Systems, 39 (16). pp. 1858-1871. ISSN 1532-5008; ESSN: 1532-5016

Misron, Norhisam and Aris, Ishak and Mariun, Norman and Zare, Mohamad Reza and Wakiwaka, Hiroyuki and Nirei, Masami (2011) High Thrust Density Transverse Flux Linear Motor: Thrust Analysis and Driving Method. International Review of Electrical Engineering, 6 (5). pp. 2229-2236. ISSN 1827-6660

Misron, Norhisam and Loo, Qian Ying and Raja Othman, Raja Nor Firdaus Kashfi and Abdullah, Norrimah and Mailah, Nashiren Farzilah and Wakiwaka, Hiroyuki (2011) Effect of inductive coil shape on sensing performance of linear displacement sensor using thin inductive coil and pattern guide. Sensors, 11 (11). pp. 10522-10533. ISSN 1424-8220

Misron, Norhisam and Mailah, Nashiren Farzilah (2011) Optimization of Pole Numbers and Rotor Size for a Single Phase Slot-Less Permanent Magnet Generator. International Review of Electrical Engineering, 6 (5). pp. 2253-2260. ISSN 1827-6660

Misron, Norhisam and Mailah, Nashiren Farzilah and Abdul Shukor, Fairul Azhar and Hiroyuki, Wakiwaka and Nirei, Masami and Zare, Mohsen R. (2011) Thrust Optimization of Linear Oscillatory Actuator Using Permeance Analysis Method. International Review of Electrical Engineering, 6 (7). pp. 2929-2938. ISSN 1827-6660

Misron, Norhisam and Mat Saat, Ezril Hisham and F., Azhar and R. N., Firdaus and Hiroyuki, Wakiwaka and Nirei, Masami (2011) Positioning system for sensor less linear DC motor. Journal of the Japan Society of Applied Electromagnetics and Mechanics, 19. S91-S94. ISSN 0919-4452

Misron, Norhisam and Ng, Wei Shin and Shafie, Suhaidi and Marhaban, Mohammad Hamiruce and Mailah, Nashiren Farzilah (2011) A mobile ferromagnetic shape detection sensor using a hall sensor array and magnetic imaging. Sensors, 11 (11). pp. 10474-10489. ISSN 1424-8220

Misron, Norhisam and Rizuan, Suhairi and Vaithilingam, Aravind and Mailah, Nashiren Farzilah and Tsuyoshi, Hanamoto and Hiroaki, Yamada and Yoshihito, Shirai (2011) Performance improvement of a portable electric generator using an optimized bio-fuel ratio in a single cylinder two-stroke engine. Energies, 4 (11). pp. 1937-1949. ISSN 1996-1073

Moayedi, Hossein and Asadi, Afshin and Kim Huat, Bujang and Kazemian, Sina (2011) Zeta potential of organic soil in presence of calcium chloride, cement and polyvinyl alcohol. International Journal of Electrochemical Science, 6 (10). pp. 4493-4503. ISSN 1452-3981

Moayedi, Hossein and Asadi, Afshin and Kim Huat, Bujang and Moayedi, Fatemeh and Kazemian, Sina (2011) Enhancing electrokinetic environment to improve physicochemical properties of kaolinite using polyvinyl alcohol and cement stabilizers. International Journal of Electrochemical Science, 6 (7). pp. 2526-2540. ISSN 1452-3981

Moayedi, Hossein and Asadi, Afshin and Moayedi, Fatemeh and Kim Huat, Bujang and Kazemian, Sina (2011) Using secondary additives to enhance the physicochemical properties of kaolinite. International Journal of the Physical Sciences, 6 (8). art. no. 7A158BF25624. pp. 2004-2015. ISSN 1992-1950

Moayedi, Hossein and Kim Huat, Bujang and Asadi, Afshin and Kazemian, Sina and Mohammad Ali, Thamer Ahmad (2011) Groundwater quality assessment of Labuan Island. International Journal of Physical Sciences, 6 (18). pp. 4441-4449. ISSN 1992-1950

Moayedi, Hossein and Kim Huat, Bujang and Asadi, Afshin and Kemas Salleh, Zakariah and Moghaddas, Masoud (2011) Surface water treatment process; a review on various methods. Electronic Journal of Geotechnical Engineering, 16 (bund. G). pp. 753-761. ISSN 1089-3032

Moayedi, Hossein and Kim Huat, Bujang and Mohammad Ali, Thamer Ahmad and Asadi, Afshin and Moayedi, Fatemeh and Mokhberi, Mehdi (2011) Preventing landslides in times of rainfall: case study and FEM analyses. Disaster Prevention and Management, 20 (2). pp. 115-124. ISSN 0965-3562; ESSN: 1758-6100

Moayedi, Hossein and Kim Huat, Bujang and Mohammad Ali, Thamer Ahmad and Bakhshipor, Zeinab and Ebadi, Mehdi (2011) Comparison of geotube and stone cemented wall stability as coastal protection system [case study and 2D limit equilibrium and FEM modeling analysis]. Australian Journal of Basic and Applied Sciences, 5 (7). pp. 1-6. ISSN 1991-8178

Moazami, Danial and Muniandy, Ratnasamy and Hamid, Hussain and Md Yusoff, Zainuddin (2011) Effect of tire footprint area in pavement response studies. International Journal of the Physical Sciences, 6 (21). art. no. 3ECD19130741. pp. 5040-5047. ISSN 1992-1950

Moazami, Danial and Muniandy, Ratnasamy and Hamid, Hussain and Md Yusoff, Zainuddin (2011) The use of analytical hierarchy process in priority rating of pavement maintenance. Scientific Research and Essays, 6 (12). art. no. 182D17422709. pp. 2447-2456. ISSN 1992-2248

Mobarekeh, Mohsen Nourouzi and Chuah, Teong Guan and Choong, Thomas Shean Yaw (2011) Optimisation of reactive dye removal by sequential electrocoagulation–flocculation method: comparing ANN and RSM prediction. Water Science and Technology, 63 (5). pp. 985-994. ISSN 0273-1223

Mobarekeh, Mohsen Nourouzi and Chuah, Teong Guan and Choong, Thomas Shean Yaw and Lim, Chaw Jiang (2011) Glyphosate utilization as the source of carbon: isolation and identification of new bacteria. E-Journal of Chemistry, 8 (4). pp. 1582-1587. ISSN 0973-4945

Mohamad, Nurhaniza and Mohd Ariffin, Mohd Khairol Anuar and Ali, Aidy and Mustapha, Faizal (2011) Deflection analysis of the thin-web workpiece structure using similarity concept. Advanced Materials Research, 337. pp. 479-488. ISSN 1022-6680; ESSN: 1662-8985

Mohamad, Nurul Lina and Mustapa Kamal, Siti Mazlina and Abdullah, Abdul Ghani Liew (2011) Optimization of xylose production from sago trunk cortex by acid hydrolysis. African Journal of Food Science and Technology, 2 (5). pp. 102-108. ISSN 2141-5455

Mohamad, Nurul Lina and Mustapa Kamal, Siti Mazlina and Abdullah, Abdul Ghani Liew (2011) Overliming effects on xylitol production from sago trunk hydrolysate. Pertanika Journal of Science & Technology, 19 (2). pp. 415-422. ISSN 0128-7680; ESSN: 2231-8526

Mohamad Zain, Siti Nur Zafirah and Zahari, Nur Ismarrubie and Zainudin, Edi Syams (2011) The effect of aging temperature on mechanical properties of banana pseudostem fiber reinforced polymer composite. Key Engineering Materials, 471-472. pp. 444-448. ISSN 1013-9826; ESSN: 1662-9795

Mohamed Ariff, Azmah Hanim and Chang, S. Chuan and Chuan, O. Khang (2011) Effect of a two-step solution heat treatment on the microstructure and mechanical properties of 332 aluminium silicon cast alloy. Materials and Design, 32 (4). pp. 2334-2338. ISSN 0264-1275; ESSN: 1873-4197

Mohamed Shariff, Abd Rashid and Hassan, Md Roshidul and B. S., Blackmore and Aris, Ishak and Hossen, Md. Jakir and Ramli, Abdul Rahman (2011) Deploying natural language with topological relations for robotics behavior. Journal of Applied Sciences, 11 (16). pp. 2993-3000. ISSN 1812-5654

Mohamed Shariff, Abd Rashid and Mahmud, Ahmad Rodzi and Al-Hader, Mahmoud and Ahmad, Noordin (2011) Mobile laser scanning to spatially update the city infrastructure networks. Theoritical and Empirical Resaearches in Urban Management, 4 (6). pp. 67-77. ISSN 2065-3913

Mohamed Shariff, Abd Rashid and Mohd Hazir, Mohd Hafiz (2011) Oil palm physical and optical characteristics from two different planting materials. Research Journal of Applied Sciences, Engineering and Technology, 3 (9). pp. 953-962. ISSN 2040-7467

Mohammad, Khairul Azhar and Ali, Aidy and Oshkour, Azim Ataollahi and Sahari, Barkawi and Abdullah, Shahrum (2011) Investigation of creep fatigue crack propagation in aluminium tube. Key Engineering Materials, 462-463. pp. 541-546. ISSN 1013-9826; ESSN: 1662-9795

Mohammadi Bidhandi, Hadi and Mohd Yusuff, Rosnah (2011) Integrated supply chain planning under uncertainty using an improved stochastic approach. Applied Mathematical Modelling, 35 (6). pp. 2618-2630. ISSN 0307-904X; ESSN: 1872-8480

Mohammed, M. A. A. and Ali, Salmiaton and Wan Ab. Karim Ghani, Wan Azlina and Mohd Salleh, Mohamad Amran (2011) Gasification of empty fruit bunch for hydrogen rich fuel gas production. Journal of Applied Sciences, 11 (13). pp. 2416-2020. ISSN 1812-5654; ESSN: 1812-5662

Mohammed, M. A. A. and Ali, Salmiaton and Wan Ab. Karim Ghani, Wan Azlina and Mohd Salleh, Mohamad Amran and Ahmadun, Fakhru'l-Razi (2011) Air gasification of empty fruit bunch for hydrogen-rich gas production in a fluidized-bed reactor. Energy Conversion and Management, 52 (2). pp. 1555-1561. ISSN 0196-8904; ESSN: 1879-2227

Mohammed, Thamer Ahmed and Al-Hassoun, Saleh A. and Ghazali, Abdul Halim (2011) Prediction of flood levels along a stretch of the Langat River with insufficient hydrological data. Pertanika Journal of Science & Technology, 19 (2). pp. 237-248. ISSN 0128-7680; ESSN: 2231-8526

Mohammed Ali, Thamer Ahmed and Abdul Aziz, Azlan and Ghazali, Abdul Halim and Amini, Ata and Mohd Akib, Shatirah (2011) Impacts of land use change on streamflows in the Damansara watershed, Malaysia. Arabian Journal for Science and Engineering, 36 (5). pp. 713-720. ISSN 1319-8025

Mohd Ali, Borhanuddin and Ismail, Alyani and A. Rasid, Mohd Fadlee and M. Shamsan, Ahmed and Varahram, Pooria (2011) Self-Decision Route Selection for Energy Balancing in wireless sensor betworks. International Journal of Physical Sciences, 6 (36). pp. 8105-8114. ISSN 1992-1950

Mohd Amin, Nor Amaiza and Chua, Lee Suan and Chun, Jason Hong Neo and Ting, Hun Lee and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2011) LC-MS/MS-based metabolites of Eurycoma longifolia (Tongkat Ali) in Malaysia (Perak and Pahang). Journal of Chromatography B: Analytical Technologies in the Biomedical and Life Sciences, 879 (32). pp. 390-391. ISSN 1570-0232

Mohd Ariffen, Amizah and Ab Kadir, Mohd Zainal Abidin and Wan Ahmad, Wan Fatinhamamah (2011) The development of hybrid surge protection circuit with effect of adding a filter. International Journal of Engineering and Technology, 11 (2). pp. 37-44. ISSN 2227-2712; ESSN: 2077-1185

Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin and Yusuf, Muhammad (2011) Influence of cutting parameters on surface roughness for wet and dry turning process. Key Engineering Materials, 471-472 (1). pp. 233-238. ISSN 1013-9826

Mohd Ariffin, Mohd Khairol Anuar and Nik Hassan, Nik Mohamad Idham and Abdullah, Mohd Firdaus (2011) Analysis of MPV dashboard using solidworks and ABAQUS. Key Engineering Materials, 471-47. pp. 634-639. ISSN 1013-9826

Mohd Ariffin, Mohd Khairol Anuar and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Tang, Sai Hong and Sreenivasan, Subramaniasarma (2011) Simulation of thermoset injection for bulk moulding compounds (BMC). Key Engineering Materials, 471-472. pp. 1101-1106. ISSN 1013-9826; ESSN: 1662-9795

Mohd Aris, Khairul Dahri and Mustapha, Faizal and Salit, Mohd Sapuan and Abang Abdul Majid, Dayang Laila (2011) A structural health monitoring of a pitch catch active sensing of PZT sensor on normal, damage and repair aircraft spoiler. Key Engineering Materials, 471-472. pp. 1124-1129. ISSN 1013-9826; ESSN: 1662-9795

Mohd Nasarudin, Nurul Ezaty and Mohd Shafri, Helmi Zulhaidi (2011) Development and utilization of urban spectral library for remote sensing of urban environment. Journal of Urban and Environmental Engineering, 5 (1). pp. 44-56. ISSN 1982-3932

Mohd Noor, Samsul Bahari and Ali, Hazem Ibrahim and Marhaban, Mohammad Hamiruce (2011) Design of combined robust controller for a pneumatic servo actuator system with uncertainty. Scientific Research and Essays, 6 (4). art. no. 12A16B424199. pp. 949-965. ISSN 1992-2248

Mohd Pauzi, Nur Irfah and Omar, Husaini and Kim Huat, Bujang and Misran, Halina and Md Yusoff, Zainuddin (2011) Microcrack pattern propagations and rock quality designation of Batu Caves limestone. Electronic Journal of Geotechnical Engineering, 16 (bund. F). pp. 591-604. ISSN 1089-3032

Mohd Radzi, Mohd Amran and Abd Rahim, Nasrudin (2011) Three-phase switched capacitor active power filter with modified artificial neural network and flexible-band hysteresis. International Review of Electrical Engineering, 6 (5). pp. 2114-2121. ISSN 1827-6660

Mohd Salleh, Mohamad Amran and Abdul Rashid, Suraya and Mohd Yusoff, Hamdan and Lim, Siang Ying and Abd Razak, Jeefferie (2011) Continuous Production of Carbon Nanotubes - A Review. Journal of Industrial and Engineering Chemistry, 17 (3). pp. 367-376. ISSN 1226-086X

Mohd Salleh, Mohamad Amran and Choo, Thye Foo and Mahmood, Che Seman (2011) The study of aluminum loss and consequent phase transformation in heat-treated acid-leached kaolin. Materials Characterization, 62 (4). pp. 373-377. ISSN 1044-5803

Mohd Salleh, Mohamad Amran and Khalid Mahmoud, Dalia and Wan Abdul Karim, Wan Azlina and Idris, Azni (2011) Cationic and anionic dye adsorption by agricultural solid wastes: a comprehensive review. Desalination, 280 (1-3). pp. 1-13. ISSN 0011-9164; ESSN: 1873-4464

Mohd Sayuti, and Sulaiman, Shamsuddin and Vijayaram, Thoguluva Raghavan and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar (2011) The influence of mechanical vibration moulding process on thermal conductivity and diffusivity of Al-TiC particulate reinforced composites. Advanced Materials Research, 311-313. pp. 3-8. ISSN 1022-6680; ESSN: 1662-8985

Mohd Sayuti, and Sulaiman, Suraya and Sulaiman, Shamsuddin and Vijayaram, Thoguluva Raghavan and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2011) Thermal investigation of aluminium - 11.8% silicon (LM6) reinforced SiO2 - particles. Advanced Materials Research, 264-265. pp. 620-625. ISSN 1022-6680; ESSN: 1662-8985

Mohd Shafri, Helmi Zulhaidi and Anuar, Mohd Izzuddin and Abu Seman, Idris and Mohd Noor, Nisfariza Maris (2011) Spectral discrimination of healthy and Ganoderma-infected oil palms from hyperspectral data. International Journal of Remote Sensing, 32 (22). pp. 7111-7129. ISSN 0143-1161

Mohd Shafri, Helmi Zulhaidi and Hamdan, Nasrulhapiza and Saripan, M. Iqbal (2011) Semi-automatic detection and counting of oil palm trees from high spatial resolution airborne imagery. International Journal of Remote Sensing, 32 (8). pp. 2095-2115. ISSN 0143-1161; ESSN: 1366-5901

Mohd Shafri, Helmi Zulhaidi and Md Zeen, Redzuan (2011) Mapping Malaysian urban environment from airborne hyperspectral sensor system in the VIS-NIR (0.4-1.1 μm) spectrum. Research Journal of Environmental Sciences, 5 (6). pp. 587-594. ISSN 1819-3412; ESSN: 2151-8238

Mohd Yasin, Nazlina Haiza and Abdul Rahman, Nor'aini and Che Man, Hasfalina and Mohd Yusoff, Mohd Zulkhairi and Hassan, Mohd Ali (2011) Microbial characterization of hydrogen producing bacteria in fermented food waste at different pH values. International Journal of Hydrogen Energy, 36 (16). pp. 9571-9580. ISSN 0360-3199; ESSN: 1879-3487

Mohieldin, S. D. and Zainudin, Edi Syams and Md. Tahir, Paridah and Mohamed, Ainun Zuriyati (2011) Nanotechnology in pulp and paper industries: a review. Key Engineering Materials, 471-472. pp. 251-256. ISSN 1013-9826; ESSN: 1662-9795

Mokhtari, Ahmad and Mansor, Shattri and Mahmud, Ahmad Rodzi and Mohd Shafri, Helmi Zulhaidi (2011) Monitoring the impacts of drought on land use/cover: a developed object-based algorithm for NOAA AVHRR time series data. Journal of Applied Sciences, 11 (17). pp. 3089-3103. ISSN 1812-5654; ESSN: 1812-5662

Muhammad, and Chuah, Teong Guan and Yunus, Robiah and Rashid, Suraya and Choong, Thomas Shean Yaw (2011) Single and binary adsorptions isotherms of Cd(II) and Zn(II) on palm kernel shell based activated carbon. Desalination and Water Treatment, 29 (1-3). pp. 140-148. ISSN 1944-3994; ESSN: 1944-3986

Muhammad, and Khan, Moonis Ali and Choong, Thomas Shean Yaw and Chuah, Teong Guan and Yunus, Robiah and Yap, Taufiq Yun Hin (2011) Desorption of β-carotene from mesoporous carbon coated monolith: isotherm, kinetics and regeneration studies. Chemical Engineering Journal, 173 (2). pp. 474-479. ISSN 1385-8947; ESSN: 1873-3212

Muhammad Amin, Ahmad Fairuz and Aris, Ishak and Abdul Halin, Izhal and Raja Abdullah, Raja Syamsul Azmir and Sahbudin, Ratna Kalos Zakiah and Abdullah, Mohamad Khazani (2011) Development of vehicle communication system using FPGA. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 1026-1038. ISSN 1991-8178

Muhammad Noor, Ahmad Shukri and Inami, W. and Miyakawa, Atsuo and Kawata, Yoshimasa (2011) Using two-photon excitation methods for determination of Ca2+ in contamination with protein - full length research paper. International Journal of the Physical Sciences, 6 (33). art. no. D06240B19089 . 7435 -7440. ISSN 1992 -1950

Muniandy, Ratnasamy and Aburkaba, Eltaher (2011) The effect of type and particle size of industrial wastes filler on indirect tensile stiffness and fatigue performance of stone mastic asphalt mixtures. Australian Journal of Basic and Applied Sciences, 5 (11). pp. 297-308. ISSN 1991-8178

Muniandy, Ratnasamy and Moazami, Danial and Behbahani, Hamid (2011) Pavement rehabilitation and maintenance prioritization of urban roads using fuzzy logic. Expert Systems with Applications, 38 (10). pp. 12869-12879. ISSN 0957-4174

Mustaffa, Nurul Akmil and Abdullah, Luqman Chuah and Ahmad @ Ayob, Mansor and Mohd Dahlan, Khairul Zaman (2011) Nano-alumina and radiation effect on the mechanical properties of high density polyethylene/hydroxy apatite composite. Key Engineering Materials, 471-472. pp. 121-126. ISSN 1013-9826; ESSN: 1662-9795

Mustapa Kamal, Siti Mazlina and Abdullah, Abdul Ghani Liew and Abdullah, Norhafizah and Mohamad, Nurul Lina (2011) Detoxification of sago trunk hydrolysate using activated charcoal for xylitol production. Procedia Food Science, 1 (1). pp. 908-913. ISSN 2211-601X

Mustapha, Faizal and Ng, Wei Sim and Shahrjerdi, Ali (2011) Finite element analysis (FEA) modeling on adhesive joint for composite fuselage model. International Journal of Physical Sciences, 6 (22). pp. 5153-5165. ISSN 1992-1950

Mustapha, Sa'ari (2011) Review of affinity precipitation methods. International Journal of Applied Chemistry, 7 (1). pp. 53-58. ISSN 0973-1792; ESSN: 0973-9734

Mustapha, Saari and Zainal Abidin, Zurina and Chandar, Haris and Sahgravani, Reza and Harun, M. Y. (2011) Production of semi- refined carrageenan from Eucheuma cotonii. Journal of Scientific and Industrial Research, 70 (10). pp. 865-870. ISSN 0022-4456

Naji, Ahmed Wathik and Hamida, Belal Ahmed and Cheng, Xiau San and Mahdi, Mohd Adzir and Harun, Sulaiman Wadi and Khan, Sheroz and Al-Khateeb, Wajdi Fawzi Mohammed and Zaidan, Aws Alaa and Zaidan, Bilal Bahaa and Ahmad, Harith (2011) Review of Erbium-doped fiber amplifier. International Journal of the Physical Sciences, 6 (20). art. no. E3DDCAC28626. pp. 4674-4689. ISSN 1992-1950

Najigivi, Alireza and Abdul Rashid, Suraya and Abd. Aziz, Farah Nora Aznieta and Mohd Salleh, Mohamad Amran (2011) Investigations on the development of the permeability properties of binary blended concrete with nano-SiO2 particles. Journal of Composite Materials, 45 (19). pp. 1931-1938. ISSN 0021-9983; ESSN: 1530-793X

Nakhaeinia, Danial and Tang, Sai Hong and Karasfi, Babak and Motlagh, Omid Reza Esmaeili and Kit, A. C. (2011) Virtual force field algorithm for a behaviour-based autonomous robot in unknown environments. Journal of Systems and Control Engineering, 225 (1). pp. 51-62. ISSN 0959-6518; ESSN: 2041-3041

Nakhaeinia, Danial and Tang, Sai Hong and Mohd Noor, Samsul Bahari and Motlagh, Omid (2011) A review of control architectures for autonomous navigation of mobile robots. International Journal of Physical Sciences, 6 (2). pp. 169-174. ISSN 1992-1950

Nazemi, Allahyar and Lee, Teang Shui and Davoudi, M. H. and Ghazali, Abdul Halim and Ahmad, Desa (2011) Critical hydraulic gradient of non-cohesive suspended sediment laden flow through pervious rockfill dam. Australian Journal of Basic and Applied Sciences, 5 (7). pp. 1119-1126. ISSN 1991-8178

Ng, Chee Kyun and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin and Jamuar, Sudhanshu Shekhar (2011) A novel ternary CDMA code for TPSK modulation scheme. Wireless Personal Communications, 58 (2). pp. 315-335. ISSN 0929-6212; ESSN: 1572-834X

Ng, Hui Suan and Tan, Chin Ping and Chen, Soo Kien and Mokhtar, Mohd Noriznan and Ariff, Arbakariya and Ling, Tau Chuan (2011) Primary capture of cyclodextrin glycosyltransferase derived from Bacillus cereus by aqueous two phase system. Separation and Purification Technology, 81 (3). pp. 318-324. ISSN 1383-5866

Ng, Wei Sim and Mustapha, Faizal and Varatharajoo, Renuganth and Zahari, Rizal and Abang Abdul Majid, Dayang Laila (2011) Parametric study on cohesive element for composite fuselage model. Key Engineering Materials, 471-472. pp. 1085-1090. ISSN 1013-9826; ESSN: 1662-9795

Niestanak, S. Abedi and Abdul Aziz, Faieza and Sulaiman, Shamsuddin and Mohd Yusuff, Rosnah (2011) Product structure initialization, the bottleneck of ERP implementation in customer driven environments: a case study. Pertanika Journal of Science & Technology, 19 (1). pp. 77-92. ISSN 0128-7680; ESSN: 2231-8526

Noroziroshan, Alireza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Mustapha, Faizal (2011) An optimization technique using hybrid GA-SA algorithm for multi-objective scheduling problem. Scientific Research and Essays, 6 (8). art. no. 587417120543. pp. 1720-1731. ISSN 1992-2248

Nosrati, Shohreh and Mohd Tahir, Suraya and Mohamed Ariff, Azmah Hanim and Hashim, Mansor (2011) Nanocrystallization of CK60 commercial steel by drilling method. Australian Journal of Basic and Applied Sciences, 5 (8). pp. 1224-1228. ISSN 1991-8178

Omar, Husaini and Kim Huat, Bujang and Md Yusoff, Zainuddin and Safaei, Mehrdad and Ghiasi, Vahed (2011) Deterministic rainfall induced landslide approaches, advantages and limitations. Electronic Journal of Geotechnical Engineering, 16 (U). pp. 1619-1650. ISSN 1089-3032

Omar, Husaini and Md Yusoff, Zainuddin and Mohd Pauzi, Nur Irfah (2011) Geotechnical Properties of Waste Soil from Open Dumping Area in Malaysia. Electronic Journal of Geotechnical Engineering, 16 (Bund. ). pp. 1205-1220. ISSN 1089-3032

Omar, Husaini and Md Yusoff, Zainuddin and Mohd Pauzi, Nur Irfah (2011) Integrated approach of electrical resistivity and borehole logging to determine heterogeneous composition of waste soil. Electronic Journal of Geotechnical Engineering, 16 (p). pp. 1395-1410. ISSN 1089-3032

Omar, Husaini and Md Yusoff, Zainuddin and Mohd Pauzi, Nur Irfah and Khalit, Saiful Iskandar and Nasib, Mohd Yunus (2011) water detection on the ground subsurface using electromagnetic device EM-34 for Airport Runaway. Electronic Journal of Geotechnical Engineering, 16 (Bund. ). pp. 1511-1522. ISSN 1089-3032

Omar, Rozita and Idris, Azni and Yunus, Robiah and Khalid, Kaida and Mohd Idris, Aida Isma (2011) Characterization of empty fruit bunch for microwave-assisted pyrolysis. Fuel, 90 (4). pp. 1536-1544. ISSN 0016-2361; ESSN: 1873-7153

Ooi, Chien Wei and Siew, Ling Hii and Mustapa Kamal, Siti Mazlina and Ariff, Arbakariya and Tau, Chuan Ling (2011) Extractive fermentation using aqueous two-phase systems for integrated production and purification of extracellular lipase derived from Burkholderia pseudomallei. Process Biochemistry, 46 (1). pp. 68-73. ISSN 1359-5113; ESSN: 1873-3298

Oshkour, Azim Ataollahi and Sahari, Barkawi and Ali, Aidy (2011) Variation of stress intensity factor through the thickness of plate. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012004. pp. 1-12. ISSN 1757-8981; ESSN: 1757-899X

Osman Mohamed Addin, Addin and Salit, Mohd Sapuan and Othman, Mohamed and Ahmed Ali, Basheer Ahmed (2011) Comparison of Naïve bayes classifier with back propagation neural network classifier based on f - folds feature extraction algorithm for ball bearing fault diagnostic system. International Journal of Physical Sciences, 6 (13). pp. 3181-3188. ISSN 1992-1950

Othman, Mohammad Lutfi and Aris, Ishak and Othman, Mohammad Ridzal and Osman, Harussaleh (2011) Rough-Set-and-Genetic-Algorithm based data mining and Rule Quality Measure to hypothesize distance protective relay operation characteristics from relay event report. International Journal of Electrical Power & Energy Systems, 33 (8). pp. 1437-1456. ISSN 0142-0615; ESSN: 1879-3517

Panjehpour, Mohammad and Farzadnia, Nima and Anwar, Mohammed Parvez and Abang Ali, Abang Abdullah (2011) FRP sheets contribution in common repair techniques of concrete structures with emphasis on concrete columns. International Journal of Sustainable Construction Engineering & Technology, 2 (2). pp. 54-61. ISSN 2180-3242

Parvin, K. and Aziz, Mohammad Gulzarul and Yusof, Yus Aniza and Sarker, M. S. H. and Sill, H. P. (2011) Degradation kinetics of water-soluble annatto extract and sensory evaluation of annatto colored yoghurt. Journal of Food, Agriculture and Environment, 9 (3-4). pp. 139-142. ISSN 1459-0255

Pendashteh, Ali Reza and Ahmadun, Fakhru'l-Razi and Chaibakhsh, Naz and Abdullah, Luqman Chuah and Madaeni, Sayed Siavash and Zainal Abidin, Zurina (2011) Modeling of membrane bioreactor treating hypersaline oily wastewater by artificial neural network. Journal of Hazardous Materials, 192 (2). pp. 568-575. ISSN 0304-3894; ESSN: 1873-3336

Piltan, Farzin and Aryanfar, Alihossein and Sulaiman, Nasri and Marhaban, Mohammad Hamiruce and Ramli, Abdul Rahman (2011) Design adaptive fuzzy robust controllers for robot manipulator. World Applied Sciences Journal, 12 (12). pp. 2317-2329. ISSN 1818-4952; ESSN: 1991-6426

Piltan, Farzin and Salehi, Alireza and Sulaiman, Nasri (2011) Design artificial robust control of second order system based on adaptive fuzzy gain scheduling. World Applied Sciences Journal, 13 (5). pp. 1085-1092. ISSN 1818-4952; ESSN: 1991-6426

Piltan, Farzin and Sulaiman, Nasri and Talooki, Iraj Asadi and Ferdosali, Payman (2011) Designing on-line tunable gain fuzzy sliding mode controller using sliding mode fuzzy algorithm: applied to internal combustion engine. World Applied Sciences Journal, 15 (3). pp. 422-428. ISSN 1818-4952; ESSN: 1991-6426

Piltan, Farzin and Zare, A. and Sulaiman, Nasri and Marhaban, Mohammad Hamiruce and Ramli, Abdul Rahman (2011) A model-free robust sliding surface slope adjustment in sliding mode control for robot manipulator. World Applied Sciences Journal, 12 (12). pp. 2230-2336. ISSN 1818-4952; ESSN: 1991-6426

Pin, Kar Yong and Abdullah, Luqman Chuah and Ahmad, Abdull Rashih and Mat Ali, Rasadah and Law, Chung Lim and Choong, Thomas Shean Yaw (2011) Solid-liquid extraction of betel leaves (Piper betle L.). Journal of Food Process Engineering, 34 (3). pp. 549-565. ISSN 0145-8876; ESSN: 1745-4530

Pin, Kar Yong and Ilicali, Coskan and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and M. N., Muhammad Shahrul and Mat Ali, Rasadah and Law, Chung Lim (2011) Modelling of freezing kinetics of extract of betel leaves (Piper betle L.). International Journal of Food Engineering, 7 (1). ISSN 2194-5764; ESSN: 1556-3758

Pua, Ming Yee and Shamsudin, Rosnah and Hamzah, Azman and Endan, Johari (2011) Development and fabrication of pineapple rolled tart machine. American Journal of Food Technology, 6 (6). pp. 513-530. ISSN 1557-4571; ESSN: 1557-458X

Pua, Ming Yee and Shamsudin, Rosnah and Hamzah, Azman and Endan, Johari (2011) Kinetic studies on cooking of pineapple bakery jam. American Journal of Food Technology, 6 (7). pp. 594-603. ISSN 1557-4571; ESSN: 1557-458X

Radif, Zainab Shakir and Ali, Aidy (2011) Fracture toughness of kenaf mat reinforced polyester composite. Pertanika Journal of Science & Technology, 19 (1). pp. 177-187. ISSN 0128-7680; ESSN: 2231-8526

Radif, Zainab Shakir and Ali, Aidy and Abdan, Khalina (2011) Development of a green combat armour from rame-Kevlar-polyester composite. Pertanika Journal of Science & Technology, 19 (2). pp. 339-348. ISSN 0128-7680; ESSN: 2231-8526

Rahimian, Farzad Pour and Ibrahim, Rahinah and O. K. Rahmat, Rahmita Wirza and Abdullah, Muhamad Taufik and Jaafar, Mohd Saleh (2011) Mediating cognitive transformation with VR 3D sketching during conceptual architectural design process. International Journal of Architectural Research, 5 (1). pp. 99-113. ISSN 1994-6961

Rahman, Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Ismail, Ahmed Faris and Yahya, Azmi (2011) Integrated mechanics of hybrid electrical air-cushion tracked vehicle for swamp peat. International Journal of Heavy Vehicle Systems, 18 (3). pp. 227-244. ISSN 1744-232X; ESSN: 1741-5152

Raja Abdullah, Raja Syamsul Azmir and A. Rasid, Mohd Fadlee and Mohamed, Mohamed Khalaf Alla Hassan (2011) Improvement in detection with forward scattering radar. Science China Information Sciences, 54 (12). pp. 2660-2672. ISSN 1674-733X; ESSN: 1869-1919

Ramli, Abdul Rahman and Perumal, Thinagaran and Chui, Yew Leong (2011) Interoperability Framework for Smart Home Systems. IEEE Transactions on Consumer Electronics, 57 (4). pp. 1607-1611. ISSN 0098-3063

Rashid, A. Mahmood and Awang Biak, Dayang Radiah and Zainal Abidin, Zurina and Ahmadun, Fakhru'l-Razi (2011) Low-temperature synthesis of carbon nanotubes via floating catalyst chemical vapor deposition method. Fullerenes, Nanotubes and Carbon Nanostructures, 19 (6). pp. 522-531. ISSN 1536-383X; ESSN: 1536-4046

Razali, Mohd Hudzari and Wan Ismail, Wan Ishak and Ramli, Abdul Rahman and Sulaiman, Md. Nasir and Harun, Mohd Haniff (2011) Technique on simulation for real time oil palm fruits maturity prediction. African Journal of Agricultural Research, 6 (7). art. no. 381A74137457. pp. 1823-1830. ISSN 1991-637X

Razavi Armaghani, Farzaneh and Shekar Jamuar, Sudhanshu and Khatun, Sabira and A. Rasid, Mohd Fadlee (2011) Performance analysis of TCP with delayed acknowledgments in multi-hop ad-hoc networks. Wireless Personal Communications, 56 (4). pp. 791-811. ISSN 0929-6212; ESSN:1572-834X

Resul, Muhammad Faiz M. and Mohd Ghazi, Tinia Idaty and Idris, Azni (2011) Temperature dependence on the synthesis of jatropha biolubricant. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012032. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Romli, Fairuz Izzuddin and Cheang, Kian Hou and Chew, Junxian (2011) Application of subsystems change ranking methodology in aircraft redesign process. IIUM Engineering Journal, 12 (3). pp. 101-114. ISSN 1511-788X; ESSN: 2289-7860

Romli, Fairuz Izzuddin and Cheang, Kian Hou and Chew, Junxian and Mohd Rafie, Azmin Shakrine (2011) Subsystems change ranking methodology (SCRaM) for complex product redesign process. Advanced Materials Research, 308-310. pp. 167-173. ISSN 1022-6680; ESSN: 1662-8985

Romli, Fairuz Izzudin and Mohd Rafie, Azmin Shakrine (2011) Derivation of strategic solution space for product redesign planning. International Review of Aerospace Engineering, 4 (1). pp. 12-19. ISSN 1973-7459; ESSN: 1973-7440

Roodi, Siamak Moslehi and Yahya, Azmi and Abd Aziz, Samsuzana (2011) Field performance of a single chassis integrated machine system in planting oil palm seedlings. Journal of Agricultural Machinery Science, 7 (2). pp. 185-190. ISSN 1306-0007

Rostami, Vahid and Ramli, Abdul Rahman and Samsudin, Khairulmizam and Saripan, M. Iqbal (2011) Place recognition using semantic concepts of visual words. Scientific Research and Essays, 6 (17). art. no. 51C36F134811. pp. 3751-3759. ISSN 1992-2248

Sadrolhosseini, Amir Reza and Abd. Moksin, Mohd Maarof and Mat Yunus, Wan Mahmood and Mohammadi, Ahmad and Talib, Zainal Abidin (2011) Optical characterization of palm oil biodiesel blend. Journal of Materials Science and Engineering, 5. pp. 550-554. ISSN 2161-6213

Saeed, Rashid Abdelhaleem and Mohamad, Hafizal and Abbas, Mazlan and Mohd Ali, Borhanuddin (2011) WiFi/WiMAX seamless convergence with adaptive vertical handover for continuity of Internet access. Advances in Internet of Things, 1 (2). pp. 32-37. ISSN 2161-6817; ESSN: 2161-6825

Safarzadeh, Daryoush and Sulaiman, Shamsuddin and Abdul Aziz, Faieza and Ahmad, Desa and Majzoobi, Gholam Hossein (2011) Steer-by-switch system design for vehicles. Scientific Research and Essays, 6 (31). art. no. 0BBCC1B31282. pp. 6412-6427. ISSN 1992-2248

Safiee, Nor Azizi and Jaafar, Mohd Saleh and Noorzaei, Jamaloddin (2011) Behavior of mortarless wall subjected to in-plane combine loading. Advanced Materials Research, 264-265. pp. 1746-1751. ISSN 1022-6680; ESSN: 1662-8985

Safikhani, Hassan and Tengku Kamalden, Tengku Fadilah and Amri, Saidon and Megat Ahmad, Megat Mohamad Hamdan (2011) Ground reaction force during walking with and without counterbalance load system. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 2704-2708. ISSN 1991-8178

Saghravani, Seyed Reza and Mustapha, Sa'ari (2011) Prediction of phosphorus migration in an unconfined aquifer with visual MODFLOW in landfill area. World Applied Sciences Journal, 15 (3). pp. 438-442. ISSN 1818-4952; ESSN: 1991-6426

Sahbudin, Ratna Kalos Zakiah and Abdullah, M. K. and Mokhtar, Makhfudzah and Ahmad Anas, Siti Barirah and Hitam, Salasiah (2011) Performance of subcarrier-OCDMA system with complementary subtraction detection technique. World Academy of Science, Engineering and Technology, 75 (-). pp. 1422-1427. ISSN 2070-3724

Sahbudin, Ratna Kalos Zakiah and Abdullah, M.K. and Mokhtar, Makhfudzah and Hitam, Salasiah and Ahmad Anas, Siti Barirah (2011) Design and cost performance of decoding technique for hybrid subcarrier spectral amplitude coding-optical code division multiple access system. Journal of Computer Science, 7 (10). pp. 1525-1531. ISSN 1549-3636

Sahib, Mouayad A. and Raja Ahmad, Raja Mohd Kamil (2011) Comparison of performance and computational complexity of nonlinear active noise control algorithms. ISRN Mechanical Engineering, 2011. art. no. 925085. pp. 1-9. ISSN 2090-5122; ESSN: 2090-5130

Sahragard, Nasrolah and Ramli, Abdul Rahman and Marhaban, Mohammad Hamiruce and Mansor, Shattri (2011) Automatic spike detection and correction for outdoor machine vision: application to tomato. Scientific Research and Essays, 6 (31). art. no. A13B23132529. pp. 6554-6565. ISSN 1992-2248

Sahroni, Taufik Roni and Sulaiman, Shamsuddin and Abdullah, Tajul Ariffin and Subramonian, Sivarao (2011) Design and simulation on cast metal matrix composite by investment casting. Advanced Materials Research, 264-265. pp. 323-328. ISSN 1022-6680; ESSN: 1662-8985

Sahroni, Taufik Roni and Sulaiman, Shamsuddin and Abdullah, Tajul Ariffin and Subramonian, Sivarao (2011) Design and simulation on compressor metal matrix composite by investment casting. Advanced Materials Research, 264-265. pp. 403-408. ISSN 1022-6680; ESSN: 1662-8985

Sahroni, Taufik Roni and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Arep @ Ariff, Hambali (2011) Design and simulation on investment casting mold for metal matrix composite material. Applied Mechanics and Materials, 66-68. pp. 1676-1681. ISSN 1660-9336; ESSN: 1662-7482

Sahroni, Taufik Roni and Sulaiman, Shamsuddin and Romli, Ikhsan and Salleh, Mohd Rizal and Arep@Ariff, Hambali (2011) Nonlinear thermal expansion model for SiC/Al. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 5 (6). pp. 742-746. ISSN 1307-6892

Salah, Asem A. and Raja Abdullah, Raja Syamsul Azmir and Mohd Ali, Borhanuddin and Odeh, Nidhal A. (2011) A low complexity resource allocation algorithm for OFDMA cooperative relay networks with fairness and QoS guaranteed. IEICE Transactions on Communications, E94.B (8). pp. 2328-2337. ISSN 0916-8516; ESSN: 1745-1345

Salem, A. M. Ramzia and Al-Mansoori, Mohammed Hayder and Hizam, Hashim and Mohd Noor, Samsul Bahari and Mahdi, Mohd Adzir (2011) Broadly tunable multiwavelength fiber laser with bismuth-oxide EDF using large effective area fiber. Laser Physics, 21 (2). pp. 389-394. ISSN 1054-660X; ESSN: 1555-6611

Salemi, Hamidreza and Mohd Soom, Mohd Amin and Lee, Teang Shui and Mousavi, Sayed Farhad and Ganji, Arman and Yusoff, Mohd Kamil (2011) Application of AquaCrop model in deficit irrigation management of winter wheat in arid region. African Journal of Agricultural Research, 6 (10). art. no. 15C3C1039201. pp. 2204-2215. ISSN 1991-637X

Salemi, Hamidreza and Mohd Soom, Mohd Amin and Lee, Teang Shui and Yusoff, Mohd Kamil (2011) Impact of water resources availability on agricultural sustainability in the Gavkhuni river basin, Iran. Pertanika Journal of Science & Technology, 19 (2). pp. 213-227. ISSN 0128-7680; ESSN: 2231-8526

Salemi, Hamidreza and Mohd Soom, Mohd Amin and Mousavi, Sayed-Farhad and Ganji, Arman and Lee, Teang Shui and Yusoff, Mohd Kamil and Verdinejad, Vahid Reza (2011) Irrigated silage maize yield and water productivity response to deficit irrigation in an Arid region. Polish Journal of Environmental Studies, 20 (5). pp. 1295-1303. ISSN 1230-1485

Salemi, Hamidreza and Mohd Soom, Mohd Amin and Teang, Shui Lee and Yusoff, Mohd Kamil and Ahmad, Desa (2011) Effects of deficit irrigation on water productivity and maize yields in arid regions of Iran. Pertanika Journal of Tropical Agricultural Science, 34 (2). pp. 207-216. ISSN 1511-3701

Salit, Mohd Sapuan and Abdan, Khalina and Yunus, Robiah and Wirawan, Riza (2011) Properties of sugarcane bagasse/ poly(vinyl chloride) composites after various treatments. Journal of Composite Materials, 45 (16). pp. 1667-1674. ISSN 0021-9983

Salit, Mohd Sapuan and Abdan, Khalina and Yunus, Robiah and Wirawan, Riza (2011) The effects of thermal history on tensile properties of poly (vinyl chloride) and its composite with sugarcane bagasse. Journal of Thermoplastic Composite Materials, 24 (4). pp. 567-579. ISSN 0892-7057

Salit, Mohd Sapuan and Ismail, Napsiah and Hambali, Ariff and Samsudin, Abdul Rahim and Yusoff, Nukman (2011) Concurrent decisions on design concept and material selection using analytical hierarchy process at the conceptual design stage. Concurrent Engineering: Research and Applications, 19 (2). pp. 111-121. ISSN 1063-293X

Salit, Mohd Sapuan and Mun, N. K. and Arep @ Ariff, Hambali and Lok, H. Y. and Abd Manab, Mohd Fairuz and Ishak, Mohamad Ridzwan (2011) Prototype expert system for material selection of polymeric composite automotive dashboard. International Journal of Physical Sciences, 6 (25). art. no. CC38C0A25510. pp. 5988-5995. ISSN 1992-1950

Salit, Mohd Sapuan and Sahari, Barkawi and Abdalla, F. Hamed and Megat Ahmad, Megat Mohamad Hamdan (2011) Stress-strain distributions through the thickness of thick walled filament wound polymer composite tube under internal pressure loading. Journal of Polymer Materials, 28 (3). pp. 475-504. ISSN 0973-8622

Salit, Mohd Sapuan and Zainudin, Edi Syams and Leman, Zulkiflle and Kho, J. Y. and Ahmed Ali, B. A. and Hambali, Ariff (2011) Materials selection for natural fiber reinforced polymer composites using analytical hierarchy process. Indian Journal of Engineering and Materials Sciences, 18 (4). pp. 255-267. ISSN 0971-4588

Samsu Baharuddin, Azhari and Abdul Rahman, Nor'aini and Md. Shah, Umi Kalsom and Hassan, Mohd Ali and Wakisaka, Minato and Shirai, Yoshihito (2011) Evaluation of pressed shredded empty fruit bunch (EFB)-palm oil mill effluent (POME) anaerobic sludge based compost using Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) analysis. African Journal of Biotechnology, 10 (41). art. no. 6CC81EB26167. pp. 8082-8089. ISSN 1684–5315

Samsudin, Khairulmizam and Ahmad, Faisul Arif and Mashohor, Syamsiah (2011) A highly interpretable fuzzy rule base using ordinal structure for obstacle avoidance of mobile robot. Applied Soft Computing, 11 (2). pp. 1631-1637. ISSN 1568-4946; ESSN: 1872-9681

Sarmani, Abdul Rahman and Abu Bakar, Muhammad Hafiz and A. Bakar, Ahmad Ashrif and Mahamd Adikan, Faisal Rafiq and Mahdi, Mohd Adzir (2011) Spectral variations of the output spectrum in a random distributed feedback Raman fiber laser. Optics Express, 19 (15). pp. 14152-14159. ISSN 1094-4087; ESSN:1094-4087

Sarmani, Abdul Rahman and Sheih, Shou-Jong and Mahamd Adikan, Faisal Rafiq and Mahdi, Mohd Adzir (2011) Spectral hole burning effects initiated by uniform signal intensities in a gain-flattened EDFA. Chinese Optics Letters , 9 (2 ). 020603- . ISSN 1671-7694

Sarraf, Mohammad Javadian and Hamidon, Mohd Nizar and Mohd Isa, Maryam and Ismail, Alyani and Zarabi, Amir Reza (2011) Interfacing SAW resonators for wireless high temperature applications. Sensors & Transducers Journal, 130 (7). pp. 11-22. ISSN 2306-8515; ESSN: 1726-5479

Sayyar, Sepidar and Zainal Abidin, Zurina and Yunus, Robiah and Muhammad, Azhari (2011) Solid liquid extraction of Jatropha seeds by microwave pretreatment and ultrasound assisted methods. Journal of Applied Sciences, 11 (13). pp. 2444-2447. ISSN 1812-5654; ESSN: 1812-5662

Sejali, S. N. F. and Anuar, Mohd Shamsul (2011) Effect of drying methods on phenolic contents of neem (Azadirachta indica) leaf powder. Journal of Herbs, Spices & Medicinal Plants, 17 (2). pp. 119-131. ISSN 1049-6475; ESSN: 1540-3580

Seyajah, Norhisham and Abdul Aziz, Faieza and Ismail, Napsiah and Salit, Mohd Sapuan and Ibrahim, Mohd Shukri (2011) Flexural mechanical characteristic of sawdust and chipwood filled epoxy composites. Key Engineering Materials, 471-472. pp. 1064-1069. ISSN 1013-9826; ESSN: 1662-9795

Seyajah, Norhisham and Abdul Aziz, Faieza and Ismail, Napsiah and Salit, Mohd Sapuan and Ibrahim, Mohd Shukri (2011) Tensile properties and micromorphologies of sawdust and chipwood filled epoxy composites. Key Engineering Materials, 471-472. pp. 1070-1074. ISSN 1013-9826; ESSN: 1662-9795

Shahrjerdi, Ali and Mustapha, Faizal and Bayat, Mehdi and Abang Abdul Majid, Dayang Laila (2011) Free vibration analysis of solar functionally graded plates with temperature-dependent material properties using second order shear deformation theory. Journal of Mechanical Science and Technology, 25 (9). pp. 2195-2209. ISSN 1738-494X; ESSN: 1976-3824

Shahrjerdi, Ali and Mustapha, Faizal and Bayat, Mehdi and Salit, Mohd Sapuan and Abang Abdul Majid, Dayang Laila (2011) Fabrication of functionally graded Hydroxyapatite-Titanium by applying optimal sintering procedure and powder metallurgy. International Journal of Physical Sciences, 6 (9). pp. 2258-2267. ISSN 1992-1950

Shahrjerdi, Ali and Mustapha, Faizal and Bayat, Mehdi and Salit, Mohd Sapuan and Zahari, Rizal and M. M., Shahzamanian (2011) Natural frequency of F.G. rectangular plate by shear deformation theory. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012008. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Shahrjerdi, Ali and Mustapha, Faizal and Salit, Mohd Sapuan and Bayat, Mehdi and Abang Abdul Majid, Dayang Laila and Zahari, Rizal (2011) Optimal sintering procedure to fabrication of functionally graded Hydroxyapatite-Titanium. Key Engineering Materials, 471-472. pp. 140-144. ISSN 1013-9826; ESSN: 1662-9795

Shahrjerdi, Ali and Mustapha, Faizal and Salit, Mohd Sapuan and Bayat, Mehdi and Abang Abdul Majid, Dayang Laila and Zahari, Rizal (2011) Thermal free vibration analysis of temperature-dependent functionally graded plates using second order shear deformation. Key Engineering Materials, 471-472. pp. 133-139. ISSN 1013-9826; ESSN: 1662-9795

Shahrjerdi, Reza and Mohd Ariffin, Mohd Khairol Anuar and Mustapha, Faizal and Ismail, Napsiah and Esmaeili, Maryam (2011) An integrated inventory models under cooperative and non-cooperative seller-buyer and vendor supply chain. African Journal of Business Management, 5 (20). pp. 8361-8367. ISSN 1993-8233

Shahrokh Abadi, Mohammad Hadi and Hamidon, Mohd. Nizar and Shaari, Abdul Halim and Abdullah, Norhafizah and Wagiran, Rahman and Misron, Norhisam (2011) Nanocrystalline sno2-pt thick film gas sensor for air pollution applications. Sensors & Transducers Journal, 125 (2). pp. 76-88. ISSN 1726-5479

Shakerardekani, Ahmad and Karim, Roselina and Mohd Ghazali, Hasanah and Chin, Nyuk Ling (2011) Effect of roasting conditions on hardness, moisture content and colour of pistachio kernels. International Food Research Journal, 18 (2). pp. 723-729. ISSN 1985-4668; ESSN: 2231-7546

Shareghi, Masood and Abdul Aziz, Faieza (2011) Service oriented architecture and advancement of maintenance management information systems: a review. Scientific Research and Essays, 6 (15). art. no. F311C1F22973. pp. 3182-3188. ISSN 1992-2248

Shargh, R. Sonee and Al-Mansoori, M.H. and Ahmad Anas, Siti Barirah and Sahbudin, Ratna Kalos Zakiah and Zamzuri, A.K. and Mahdi, Mohd Adzir (2011) Improvement of comb lines quality employing double-pass architecture in Brillouin-Raman laser. Laser Physics Letters, 8 (11). pp. 823-827. ISSN 1612-2011; ESSN:1612-202X

Shargh, R. Sonee and Al-Mansoori, M.H. and Ahmad Anas, Siti Barirah and Sahbudin, Ratna Kalos Zakiah and Mahdi, Mohd Adzir (2011) OSNR enhancement utilizing large effective area fiber in a multiwavelength Brillouin-Raman fiber laser. Laser Physics Letters, 8 (2). pp. 139-143. ISSN 1612-2011

Shee, Yu Gang and Al-Mansoori, Mohammed Hayder and Ismail, Alyani and Hitam, Salasiah and Mahdi, Mohd Adzir (2011) Multiwavelength Brillouin-erbium fiber laser with double-Brillouin-frequency spacing. Optics Express, 19 (3). pp. 1699-1706. ISSN 1094-4087

Shoaei, Mohammad Dalili and Al-Karni, Awad Ali and Noorzaei, Jamaloddin and Paknahad, Masoud and Jaafar, Mohd Saleh and Kim Huat, Bujang (2011) Numerical simulation of soil-structure interaction in framed and shear-wall structures. Interaction and Multiscale Mechanics, 4 (1). pp. 17-34. ISSN 1976-0426; ESSN: 2092-6200

Shokripour, Hamed and Wan Ismail, Wan Ishak and Karimi, Zahra Moez (2011) Development of an automatic self balancing control system for a tree climbing robot. African Journal of Agricultural Research, 5 (21). art. no. E3B67E834766. pp. 2964-2971. ISSN 1991-637X

Show, Pau Loke and Tan, Chin Ping and Anuar, Mohd Shamsul and Ariff, Arbakariya and Yusof, Yus Aniza and Chen, Soo Kien and Ling, Tau Chuan (2011) Direct recovery of lipase derived from Burkholderia cepacia in recycling aqueous two-phase flotation. Separation and Purification Technology, 80 (3). pp. 577-584. ISSN 1383-5866; ESSN: 1873-3794

Sidhu, Rajdave Singh and Ali, Aidy and Hassan, Mohd Roshdi (2011) Experimental determination of fatigue life of automotive jounce bumper. Key Engineering Materials, 462-463. pp. 634-638. ISSN 1013-9826; ESSN: 1662-9795

Siregar, Januar Parlaungan and Salit, Mohd Sapuan and Ab. Rahman, Mohd. Zaki and Mohd. Dahlan, Khairul Zaman (2011) Thermogravimetric analysis (TGA) and differential scanning calometric (DSC) analysis of pineapple leaf fibre (PALF) reinforced high impact polystyrene (HIPS) composites. Pertanika Journal of Science & Technology, 19 (1). pp. 161-170. ISSN 0128-7680; ESSN: 2231-8526

Sobri, Shafreeza and Ali, A. H. M. (2011) Chemical characterisation of printed circuit board wastewater. IOP Conference Series: Materials Science and Engineering, 17 (012021). pp. 1-5. ISSN 1757-899X

Sorooshian, Shahryar and Zulkifli, Norzima and Ismail, Mohd Yusof (2011) Descriptive comparison of SME performance between Iran and UK. World Applied Sciences Journal, 15 (2). pp. 239-243. ISSN 1818-4952; ESSN: 1991-6426

Sorooshian, Shahryar and Zulkifli, Norzima and Ismail, Mohd Yusof and Mohd Yusuff, Rosnah (2011) Novel performance modelling in small and medium-sized enterprises in the pistachio industry. African Journal of Business Management, 5 (10). art. no. C2D62BB39871. pp. 3828-3833. ISSN 1993-8233

Suhail, Adeel H. and Ismail, Napsiah and Wong, Shaw Voon and Abdul Jalil, Nawal Aswan (2011) Cutting parameters identification using multi adaptive network based fuzzy inference system: an artificial intelligence approach. Scientific Research and Essays, 6 (1). art. no. 6E1102E17546. pp. 187-195. ISSN 1992-2248

Suhail, Adeel H. and Ismail, Napsiah and Wong, Shaw Voon and Abdul Jalil, Nawal Aswan (2011) Workpiece surface temperature for in-process surface roughness prediction using response surface methodology. Journal of Applied Sciences, 11 (2). pp. 308-315. ISSN 1812-5654; ESSN: 1812-5662

Sulaiman, Nasri and Marhaban, Mohammad Hamiruce and Piltan, Farzin and Gavahian, Atefeh (2011) Novel Sliding Mode Controller for robot manipulator using FPGA. Journal of Advanced Science and Engineering Research, 1 (1). pp. 1-22. ISSN 2231-8844

Sulaiman, Nasri and Marhaban, Mohammad Hamiruce and Piltan, Farzin and Nowzary, Adel and Tohidian, Mostafa (2011) Design of FPGA-based Sliding Mode Controller for Robot Manipulator. International Journal of Robotics and Automation, 2 (3). pp. 173-194. ISSN 2180-1312

Sulaiman, Nasri and Marhaban, Mohammad Hamiruce and Raja Ahmad, Raja Mohd Kamil and Hussein, Basheer Noaman (2011) Design of PSO-based Fuzzy Logic Controller for single Axis Magnetic Levitation System. IEEJ Transactions on Electrical and Electronic Engineering, 6 (6). pp. 577-584. ISSN 1931-4973

Sulaiman, Nasri and Piltan, Farzin (2011) Design Mathematical Tunable Gain PID-Like Sliding Mode Fuzzy Controller with Minimum Rule base. International Journal of Robotics and Automation, 2 (3). pp. 146-156. ISSN 0826-8185

Sulaiman, Nasri and Piltan, Farzin and Allahdadi, Sadeq and Dialame, Mohammadali and Abbas, Zulkifly (2011) Position control of robot manipulator: Design a novel SISO adaptive sliding mode fuzzy PD fuzzy sliding mode control. International Journal of Artificial intelligence and Expert System, 2 (5). pp. 196-214. ISSN 2180-124X

Sulaiman, Nasri and Piltan, Farzin and Ferdosali, Paiman and Talooki, Iraj Assadi (2011) Design Model Free Fuzzy Sliding Mode Control: Applied to Internal Combustion Engine. International Journal of Engineering, 5 (4). pp. 302-312. ISSN 1025-2495

Sulaiman, Nasri and Piltan, Farzin and Ferdosali, Payman and Rashidi, Mehdi and Tajpeikar, Zahra (2011) Adaptive MIMO Fuzzy Compensate Fuzzy Sliding Mode Algorithm: Applied to Second Order Nonlinear System. International Journal of Engineering, 5 (5). pp. 365-382. ISSN 1025-2495

Sulaiman, Nasri and Piltan, Farzin and Gavahian, Atefeh and Roosta, Samaneh and Soltani, Samira (2011) On line Tuning Premise and Consequence FIS: Design Fuzzy Adaptive Fuzzy Sliding Mode Controller based on Lyaponuv Theory. International Journal of Robotics and Automation, 2 (5). pp. 386-404. ISSN 2180-1312

Sulaiman, Nasri and Piltan, Farzin and Haghighi, Sh. Tayebe and Nazari, Iman and Siamak, Sobhan (2011) Artificial Control of PUMA Robot Manipulator: A-Review of Fuzzy Inference Engine And Application to Classical Controller. International Journal of Robotics and Automation, 2 (5). pp. 406-429. ISSN 2180-1312

Sulaiman, Nasri and Piltan, Farzin and Jalali, Amin (2011) Design of PC-based sliding mode controller and normalized sliding surface slope using PSO method for robot manipulator. International Journal of Robotics and Automation, 2 (4). pp. 245-257. ISSN 0826-8185

Sulaiman, Nasri and Piltan, Farzin and Jalali, Amin and Narouei, Fereshteh Danesh (2011) Design of Model Free Adaptive Fuzzy Computed Torque Controller: Applied to Nonlinear Second Order System. International Journal of Robotics and Automation, 2 (4). pp. 232-244. ISSN 2180-1312

Sulaiman, Nasri and Piltan, Farzin and Jalali, Amin and Siamak, Sobhan and Nazari, Iman (2011) Artificial Robust Control of Robot Arm: Design a Novel SISO Backstepping Adaptive Lyapunov Based Variable Structure Control. International Journal of Control and Automation (IJCA), 4 (4). pp. 1-19. ISSN 2005-4297

Sulaiman, Nasri and Piltan, Farzin and Nasiri, Hajar and Allahdadi, Sadeq and Bairami, Mohamad Amin (2011) Novel Robot Manipulator Adaptive Artificial Control: Design a Novel SISO Adaptive Fuzzy Sliding Algorithm Inverse Dynamic Like Method. International Journal of Engineering, 5 (5). pp. 399-418. ISSN 1985-2312

Sulaiman, Nasri and Piltan, Farzin and Roosta, Samaneh and Gavahian, Atefeh and Soltani, Samira (2011) Evolutionary Design of Backstepping Artificial Sliding Mode Based Position Algorithm: Applied to Robot Manipulator. International Journal of Engineering, 5 (5). 419 - 434. ISSN 1985-2312

Sulaiman, Nasri and Piltan, Farzin and Soltani, Samira and Roosta, Samaneh and Gavahian, Atefeh (2011) Artificial Chattering Free on-line Fuzzy Sliding Mode Algorithm for Uncertain System: Applied in Robot Manipulator. International Journal of Engineering, 5 (5). pp. 333-351. ISSN 1025-2495

Sulaiman, Nasri and Piltan, Farzin and Tajpaykar, Zahra and Ferdosali, Payman and Rashidi, Mehdi (2011) Design Artificial Nonlinear Robust Controller Based on CTLC and FSMC With Tunable Gain. International Journal of Robotics and Automation, 2 (3). pp. 195-210. ISSN 2180-1312

Sulaiman, Nasri and Piltan, Farzin and Talooki, Iraj Asadi and Ferdosali, Payman (2011) Control of IC Engine: Design a Novel MIMO Fuzzy Backstepping Adaptive Based Fuzzy Estimator Variable Structure Control. International Journal of Robotics and Automation, 2 (5). pp. 363-385. ISSN 2180-1312

Sulaiman, Nasri and Piltan, Farzin and Zargari, Arash and Keshavarz, Mohammad and Badri, Ali (2011) Design PID-Like Fuzzy Controller With Minimum Rule Base and Mathematical Proposed On-line Tunable Gain: Applied to Robot Manipulator. International Journal of Artificial intelligence and Expert System, 2 (4). pp. 183-187. ISSN 2180-124X

Sulaiman, Nasri and Ramli, Abdul Rahman and Marhaban, Mohammad Hamiruce and Piltan, Farzin (2011) Design a New Sliding Mode Adaptive Hybrid Fuzzy Controller. Journal of Advanced Science and Engineering Research, 1 (1). pp. 115-123. ISSN 2231-8844

Sulaiman, Shamsuddin and Ahmad, Desa and Abdul Aziz, Faieza and Safarzadeh, Daryoush and Majzoobi, Gholam Hossein (2011) An Approach to Determine Effect of Crane Hook on Payload Sway. International Journal of Mechanics and Applications, 1 (1). pp. 30-38. ISSN 2165-9281

Sulaiman, Shamsuddin and Ahmad, Desa and Abdul Aziz, Faieza and Safarzadeh, Daryoush and Majzoobi, Gholam Hossein (2011) The design process of a self-propelled floor crane. Journal of Terramechanics, 48. pp. 157-168. ISSN 0022-4898

Sulaiman, Shamsuddin and Hong, Tang Sai and Pawanchi, Sohaimi and Esmaeilian, Gholam Reza and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2011) Improvement of tops spinning manufacturing with CNC lathe. Procedia Engineering, 15. pp. 3886-3890. ISSN 1877-7058

Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Esmaeilian, Gholamreza and Faghihi, K. and Baharudin, B. T. Hang Tuah (2011) Customer knowledge management application in Malaysian mobile service providers. Procedia Engineering, 15. pp. 3891-3895. ISSN 1877-7058

Sulaiman, Shamsuddin and Tang, Sai Hong and Pawanchi, Sohaimi and Esmaeilian, Gholamreza and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2011) Improvement of Tops Spinning manufacturing with CNC Lathe. Procedia Engineering, 15. pp. 3886-3890. ISSN 1877-7058

Sulaiman, Shamsudin and Mohd Ariffin, Mohd Khairol Anuar and Esmaeilian, Gholam Reza and Faghihi, K. and Baharudin, B. T. Hang Tuah (2011) Customer knowledge management application in Malaysian mobile service providers. Procedia Engineering, 15. pp. 3891-3895. ISSN 1877-7058

Sulaiman, Suraya and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and M. Sayuti (2011) Computer simulation and experimental investigation of solidification casting process. Key Engineering Materials, 471-472. pp. 601-605. ISSN 1013-9826; ESSN: 1662-9795

Sumgap, Nor Hafizah and Bejo, Siti Khairunniza (2011) Colour spaces for paddy soil moisture content determination. Journal of Tropical Agriculture and Food Science, 39 (1). pp. 1-13. ISSN 1394-9829; ESSN: 2289-9650

Syam, Syafiie and F., Tadeo and M., Villafin and A. A., Alonso (2011) Learning control for batch thermal sterilization of canned foods. ISA transactions, 50 (1). pp. 82-90. ISSN 0019-0578

Syam, Syafiie and T., Alvarez and F., Tadeo and E., Martinezc (2011) Model-free control based on reinforcement learning for a wastewater treatment problem. Applied Soft Computing, 11 (1). pp. 73-82. ISSN 1568-4946

Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Malek, Sorayya and Kashmir Singh, Sarinder Kaur and Milow, Pozi and Salleh, Aishah (2011) Assessment of predictive models for chlorophyll-a concentration of a tropical lake. BMC Bioinformatics, 12 (13). pp. 1-11. ISSN 1471-2105

Syed Mohamed, Syed Abdul Rahman Al-Haddad and Jantan, Adznan and Karimi, Abbas and Zarafshan, Faraneh (2011) An efficient Markov model for reliability analysis of predictive hybrid m-out-of-n systems. International Journal of the Physical Sciences, 6 (30). 6981 - 6994. ISSN 1992-1950

Taip, Farah Saleena and Ibrahim, Mohd Nordin and Raja Ahmad, Raja Mohd Kamil and Tan, Lee Woun (2011) Empirical modeling for spray drying process of sticky and non-sticky products. Procedia Food Science, 1 (1). pp. 690-697. ISSN 2211-601X

Tan, Wen Siang and Tey, Beng Ti and Salvamani, Shamala and Wen, Cheng Ng (2011) Production and purification of the phosphoprotein of Nipah virus in Escherichia coli for use in diagnostic assays. Biotechnology and Bioprocess Engineering, 16 (6). pp. 1166-1172. ISSN 1226-8372

Tang, Sai Hong and Firoozi, Zahra and Mohd Ariffin, Mohd Khairol Anuar and Ariafar, Shahram (2011) An integrated inventory location model considering all-unit quantity discount. African Journal of Business Management, 5 (27). art. no. 047B24816698. pp. 10965-10971. ISSN 1993-8233

Tang, Sai Hong and Homayouni, Seyed Mahdi and Alaei, Hamed (2011) The role of intelligent agents in customer knowledge management. African Journal of Business Management, 5 (16). art. no. E29F86E15216. pp. 7042-7049. ISSN 1993-8233

Tang, Sai Hong and Nouri, Hossein and Motlagh, Omid Reza Esmaeili (2011) A bacteria foraging algorithm for solving integrated multi-period cell formation and subcontracting production planning in a dynamic cellular manufacturing system. South African Journal of Industrial Engineering, 22 (2). pp. 80-99. ISSN 1012-277X; ESSN: 2224-7890

Tang, Sai Hong and Ramli, Abdul Rahman and Samsudin, Khairulmizam (2011) Unsupervised place recognition for assistive mobile robots based on local feature descriptions. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 225 (8). pp. 1068-1085. ISSN 0959-6518

Tey, Beng Ti and Chan, Eng Seng and Lim, Tek Kaun and Voo, Wan Ping and Pogaku, Ravindra and Zhibing, Zhang (2011) Effect of formulation of alginate beads on their mechanical behavior and stiffness. Particuology, 9 (3). 228-234. ISSN 1674-2001

Tey, Beng Ti and Taip, Farah Saleena and Tan, Wen Siang and Ling, Tau Chuan and Wongchuphan, Rattana and Subramaniam, Senthil Kumar (2011) Purification of rabbit polyclonal immunoglobulin G using anion exchangers. Process Biochemistry, 46 (Januar). pp. 101-107. ISSN 1359-5113

Tey, Beng Ti and Voo, Wan Ping and Pogaku, Ravindra and Chan, Eng Seng (2011) Comparison of alginate and pectin based beads for production of poultry probiotic cells. Journal of Bioscience and Bioengineering, 111 (3). pp. 294-299. ISSN 1389-1723

Toussi, Setareh Monshi and Ahmadun, Fakhru'l-Razi and Abdullah, Luqman Chuah and Abdul Rashid, Suraya (2011) Effect of synthesis condition on the growth of SWCNTs via catalytic chemical vapour deposition. Sains Malaysiana, 40 (3). pp. 197-201. ISSN 0126-6039

Varahram, Pooria and Mohd Ali, Borhanuddin (2011) Analyzing the effects of peak to average power ratio and digital predistortion in orthogonal frequency division multiplexing (OFDM) systems. Scientific Research and Essays, 6 (10). art. no. 0684A2B23202. pp. 2195-2200. ISSN 1992-2248

Varahram, Pooria and Mohd Ali, Borhanuddin (2011) A Low Complexity Partial Transmit Sequence for Peak to Average Power Ratio Reduction in OFDM Systems. Radioengineering, 20 (3 / Se). pp. 677-682. ISSN 1210-2512

Varahram, Pooria and Mohd Ali, Borhanuddin (2011) Partial transmit sequence scheme with new phase sequence for PAPR reduction in OFDM systems. IEEE Transactions on Consumer Electronics, 57 (2). pp. 366-371. ISSN 0098-3063; ESSN: 1558-4127

Varatharajoo, Renuganth and Alkhodari, Saleh Basha (2011) Attitude Control Augmentation for Combined Attitude and Thermal Control System. International Review of Mechanical Engineering, 5 (6). pp. 1139-1143. ISSN 1970-8734

Varatharajoo, Renuganth and Allaudin, Mohd Faizal (2011) Spacecraft Combined Attitude and Sun Tracking (CAST) System. Mathematics in Engineering, Science and Aerospace (MESA), 2 (4). pp. 413-421. ISSN 2041-3165

Varatharajoo, Renuganth and Chong, Ee Lian (2011) Interlaminar stress analysis for carbon/epoxy composite space rotors. International Journal of Multiphysics, 5 (4). pp. 353-376. ISSN 1750-9548

Varatharajoo, Renuganth and Choo, Tech Wooi and Mailah, Musa (2011) Attitude pointing enhancement for combined energy and attitude control system. Acta Astronautica, 68 (11-12). pp. 2025-2028. ISSN 0094-5765; ESSN: 1879-2030

Varatharajoo, Renuganth and Choo, Tech Wooi and Mailah, Musa (2011) Two degree-of-freedom spacecraft attitude controller. Advances in Space Research, 47 (4). pp. 685-689. ISSN 0273-1177; ESSN: 1879-1948

Varatharajoo, Renuganth and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Zahari, Rizal and Kahle, Ralph (2011) Critical speeds for carbon/epoxy composite rotors in spacecraft energy storage applications. Key Engineering Materials, 471-472. pp. 37-42. ISSN 1013-9826; ESSN: 1662-9795

Wagiran, Husin and Hossain, Md. Imam and Asni, Hazila and Ramli, Ahmad Termizi and Saripan, M. Iqbal (2011) Thermoluminescence energy response of a germanium-doped optical fiber obtained using a Monte Carlo N-particle code simulation. Journal of the Korean Physical Society, 59 (2). pp. 337-340. ISSN 0374-4884; ESSN: 1976-8524

Wan Ab. Karim Ghani, Wan Azlina and Moghadam, Reza Alipour and Mohd Salleh, Mohamad Amran and Alias, Azil Bahari (2011) Air gasification of Malaysia agricultural waste in a fluidised bed gasifier. World Review of Science, Technology and Sustainable Development, 8 (2/3/4). pp. 100-113. ISSN 1741-2242; ESSN: 1741-2234

Wan Hussin, Wan Mohamad Haniffah and Abdan, Khalina and Salit, Mohd Sapuan (2011) Water retention in kenaf/polypropylene composites due to repeated immersion and drying conditions. Key Engineering Materials, 471-472. pp. 438-443. ISSN 1013-9826; ESSN: 1662-9795

Wan Ismail, Wan Ishak and Ismail, Napsiah and Sulaiman, Md. Nasir and Mohamed Shariff, Abd Rashid and Razali, Mohd Hudzari (2011) Videogrammetry application for stereo vision Bio-Production Harvester. Trends in Applied Sciences Research, 6 (5). pp. 495-506. ISSN 1819-3579

Wan Ismail, Wan Ishak and Lam, Wai Yip and Razali, Mohd Hudzari (2011) Determination of the optimum frequency for Elaeis guineensis Jacq. detachment. African Journal of Agricultural Research, 6 (25). art. no. 6DEBEC328918. pp. 5656-5663. ISSN 1991-637X

Wan Ismail, Wan Ishak and Ramli, Abdul Rahman and Sulaiman, Md. Nasir and Razali, Mohd Hudzari and Harun, Mohd Haniff (2011) Prediction model for estimating optimum harvesting time of oil palm fresh fruit bunches. Journal of Food, Agriculture and Environment, 9 (3&4). pp. 570-575. ISSN 1459-0255

Wan Ismail, Wan Ishak and Razali, Mohd Hudzari (2011) Gantry system for urban crop production. Engineering e-Transaction, 6 (2). pp. 76-80. ISSN 1823-6379

Wan Ismail, Wan Ishak and Razali, Mohd Hudzari and Mohd Noor, Muhammad Ridzuan (2011) Development of Variable Rate Sprayer for Oil Palm Plantation. Bulletin of the Polish Academy of Sciences-Technical Sciences , 59 (3). pp. 299-302. ISSN 0239-7528

Wan Ismail, Wan Ishak and Razali, Mohd Hudzari and Muhammad, Hasbullah and Mohd Noor, Noordin Asimi (2011) A Review on farm mechanization and analysis aspect for Dioscorea Hispida. Journal of Crop Science, 2 (1). pp. 21-26. ISSN 0976-8939

Wan Ismail, Wan Ishak and Tan, Ming Ying and Razali, Mohd Hudzari (2011) Development of control program for plant growth parameter analysis in lowland tropical greenhouse. Journal of Applied Sciences, 11 (3). pp. 592-598. ISSN 1812-5654

Wirawan, Riza and Salit, Mohd Sapuan and Yunus, Robiah and Abdan, Khalina (2011) Elastic and viscoelastic properties of sugarcane bagasse-filled poly(vinyl chloride) composites. Journal of Thermal Analysis and Calorimetry, 103 (3). pp. 1047-1053. ISSN 1388-6150; ESSN: 1588-2926

Wong, Wen Xing and Ahmad Anas, Siti Barirah and Hamat@Mustafa, Fatin Hamimi and Hitam, Salasiah and Muhammad Noor, Ahmad Shukri and Kharazi, Seyed Mohammad Saleh Seyedzadeh (2011) Triple-play to the last mile over free space optics. Jurnal Teknologi, 55 (5). pp. 233-240. ISSN 0127-9696; ESSN: 2180-3722

Yaacob, Mohd. Hanif and Campbell, J.L. and Wisitsoraat, A. and Wlodarski, W. (2011) Gasochromic response of Pd/NiO nanostructured film towards hydrogen. Sensor Letters, 9 (2). pp. 898-901. ISSN 1546-198X; ESSN:1546-1971

Yaacob, Mohd. Hanif and Ou, Jian Zhen and Oh, C. and Kang, J. and Sberveglieri, Giorgio and Wlodarski, Wojtek (2011) Gasochromic performance of WO3 nanorod thin films for low concentration H2 sensing. Procedia Engineering, 25. pp. 1065-1068. ISSN 1877-7058

Yaacob, Mohd. Hanif and Yu, J. and Latham, K. and Kalantar-Zadeh, K. and Wlodarski, W. (2011) Optical hydrogen sensing properties of nanostructured Pd/MoO3 films. Sensor Letters, 9 (1). pp. 16-20. ISSN 1546-198X; ESSN:1546-1971

Yahya, Anwar Ali and Osman, Addin and Ramli, Abdul Rahman and Balola, Adlan (2011) Feature selection for high dimensional data: An evolutionary filter approach. Journal of Computer Science, 7 (5). pp. 800-820. ISSN 1549-3636

Yahya, Zuraidah and Husin, Aminuddin and Talib, Jamal and Othman, Jamarei and Darus, Siti Zauyah and Ahmed, Osumanu Haruna and Jalloh, Mohamadu Boyie (2011) Pores reconfiguration in compacted Bernam series soil. American Journal of Applied Sciences, 8 (3). pp. 212-216. ISSN 1546-9239; ESSN: 1554-3641

Yap, Taufiq Yun Hin and Lee, Hwei Voon and Hussein, Mohd Zobir and Yunus, Robiah (2011) Calcium-based mixed oxide catalysts for methanolysis of Jatropha curcas oil to biodiesel. Biomass and Bioenergy, 35 (2). pp. 827-834. ISSN 0961-9534; ESSN: 1873-2909

Yap, Taufiq Yun Hin and Lee, Hwei Voon and Yunus, Robiah and Juan, Joon Ching (2011) Transesterification of non-edible Jatropha curcas oil to biodiesel using binary Ca-Mg mixed oxide catalyst: effect of stoichiometric composition. Chemical Engineering Journal, 178. pp. 342-347. ISSN 1385-8947; ESSN: 1873-3212

Yap, Y. Kin and Jamuar, Sudhanshu Shekhar and Yahya, Azmi (2011) Combine harvester instrumentation system for use in precision agriculture. Instrumentation Science & Technology, 39 (4). pp. 374-393. ISSN 1073-9149; ESSN: 1525-6030

Yeoh, Beng Hoong and Md. Tahir, Paridah and Loh, Yueh Feng and Harun, Jalaluddin and Abdullah, Luqman Chuah (2011) A new source of natural adhesive: Acacia mangium bark extracts co-polymerized with phenol-formaldehyde (PF) for bonding Mempisang (Annonaceae spp.) veneers. International Journal of Adhesion and Adhesives, 31 (3). pp. 164-167. ISSN 0143-7496; ESSN: 1879-0127

Yunus, Robiah and Kalani, Mahshid (2011) Carbon nanotube growth via chemical vapour decomposition method. Asian Journal of Chemistry, 23 (11). pp. 4735-4743. ISSN 0970-7077

Yunus, Robiah and Muhammad Sham, Azhari (2011) Kinetics of the transesterification of Jatropha curcas triglyceride with an alcohol in the presence of an alkaline catalyst. International Journal of Sustainable Energy, 30 (Sup 2). S175-S183. ISSN 1478-6451

Yusof, Rubiyah and Abdul Rahman, Ribhan Zafira and Khalid, Marzuki and Ibrahim, Mohd Faisal (2011) Optimization of fuzzy model using genetic algorithm for process control application. Journal of the Franklin Institute, 348 (7). pp. 1717-1737. ISSN 0016-0032; ESSN: 1879-2693

Yusuf, Badronnisa and Montakhab, Amir (2011) Removing sediment transport in open channel with submerged aquatic vegetation: Laboratory study. International Journal of Physical Sciences, 6 (29). art. no. FA5341A21145. pp. 6775-6880. ISSN 1992-1950

Zahari, Rizal and Abang Abdul Majid, Dayang Laila and Mustapha, Faizal and Varatharajoo, Renuganth and A. Rasid, Zainudin and Ayob, Amran (2011) Thermal buckling and post-buckling improvements of laminated composite plates using finite element method. Key Engineering Materials, 471-47 (5). pp. 536-541. ISSN 1013-9826

Zainal Abidin, Anis Sakinah and Ratnam, Chantara Thevy and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw (2011) Performance of irradiated and crosslinked ethylene vinyl acetate/waste tire dust blend. Journal of Elastomers and Plastics, 43 (3). pp. 239-256. ISSN 0095-2443; ESSN: 1530-8006

Zainal Abidin, Zafirah and Yusof, Yus Aniza and Chin, Nyuk Ling and Mohamed, Suhaila (2011) Effect of binder on compression characteristics of Eucheuma cottonii powder. Journal of Food, Agriculture and Environment, 9 (2). pp. 137-141. ISSN 1459-0255; ESSN: 1459-0263

Zainal Abidin, Zurina and Ismail, N. and Yunus, Robiah and Ahamad, Intan Salwani and Idris, Azni (2011) A preliminary study on Jatropha curcas as coagulant in wastewater treatment. Environmental Technology, 32 (9). pp. 971-977. ISSN 0959-3330; ESSN: 1479-487X

Zainudin, Edi Syams and Abdan, Khalina and Salit, Mohd Sapuan and Mohd Dahlan, Khairul Zaman (2011) Electron Beam Cross-Linking Of Hybridized Kenaf/Pineapple Leaf Fiber-Reinforced High-Density Polyethylene Composite With And Without Cross-Linking Agents. Journal of Reinforced Plastics and Composites, 30 (21). pp. 1827-1838. ISSN 0731-6844

Zamiri, Reza and Zakaria, Azmi and Ahmad @ Ayob, Mansor and Sadrolhosseini, Amir Reza and Shameli, Kamyar and Darroudi, Majid and Mahdi, Mohd Adzir (2011) Investigation of spatial self-phase modulation of silver nanoparticles in clay suspension. Optik, 122 (9). pp. 836-838. ISSN 0030-4026; ESSN: 1618-1336

Zamiri, Reza and Zakaria, Azmi and Darroudi, Majid and Sadrolhosseini, Amir Reza and Husin, Mohd Shahril and Abdul Wahab, Zaidan and Mahdi, Mohd Adzir (2011) Preparation of starch stabilized silver nanoparticles with spatial self-phase modulation properties by laser ablation technique. Applied Physics A: Materials Science & Processing, 102 (1). pp. 189-194. ISSN 0947-8396; ESSN: 1432-0630

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi (2011) Characterization of shot peened 2024-T351 aluminum alloy. Key Engineering Materials, 462-463. pp. 912-917. ISSN 1013-9826; ESSN: 1662-9795

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi (2011) Prediction of residual stress relaxation of shot peened 2024-T351 aluminum alloy: part 1. Key Engineering Materials, 462-463. pp. 1355-1360. ISSN 1013-9826; ESSN: 1662-9795

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi (2011) Prediction of residual stress relaxation of shot peened 2024-T351 aluminum alloy: part 2. Key Engineering Materials, 462-463. pp. 1349-1354. ISSN 1013-9826; ESSN: 1662-9795

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2011) Micro-hardness and residual stress relaxation of 2024 T351 aluminum alloy. Key Engineering Materials, 462-463. pp. 343-348. ISSN 1013-9826; ESSN: 1662-9795

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2011) Modeling of residual stress relaxation of fatigue in 2024-T351 aluminium alloy. International Journal of Fatigue, 33 (2). pp. 279-285. ISSN 0142-1123

Zolkefli, Emy Yusliza and Sheikh Ahmad, Sabarinah and Kamarudin, Mohd Salleh and Saad, Che Roos and Ja'afar, Mohamad Fakri Zaky and Othman, Jamarei (2011) Thermal comfort conditions of a small-scale tropical enclosed giant freshwater prawn (Macrobrachium rosenbergii) hatchery: a case study. Journal of Fisheries and Aquatic Science, 6 (7). pp. 867-879. ISSN 1816-4927; ESSN: 1996-0751

Zulkifli, Norzima and Mohd Yusuff, Rosnah and Sorooshian, Shahryar and Ismail, Mohd Yusof (2011) Descriptive framework for entrepreneur`s capabilities. International Journal of Innovation, Management and Technology, 2 (4). pp. 292-294. ISSN 2010-0248

Zulkifli, Norzima and Mohd Yusuff, Rosnah and Sorooshian, Sharyar and Ismail, Mohd Yusof (2011) Relationship between drivers of performance in smaller firms. Middle-East Journal of Scientific Research, 9 (4). pp. 452-455. ISSN 1990-9233

Book Section

Mat Jusoh, Suriani and Ali, Aidy and Salit, Mohd Sapuan and Abdan, Khalina (2011) Non-destructive techniques (NDT) in composite materials. In: Fracture and Strength of Solids VII. Key Engineering Materials, 462-463 . Trans Tech Publications, Switzerland, pp. 918-924. ISBN 0878492100, 9780878492107

Shahrjerdi, Ali and Mustapha, Faizal (2011) Second order shear deformation theory (SSDT) for free vibration analysis on a functionally graded quadrangle plate. In: Recent Advances in Vibrations Analysis. InTech, Rijeka, Croatia, pp. 59-78. ISBN 9789533076966

Conference or Workshop Item

A. Rasid, Zainudin and Zahari, Rizal (2011) The post-buckling improvement of the shape memory alloy composite plates through the active strain energy tuning using finite element method. In: 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2011), 25-28 Sept. 2011, Bayview Hotel, Langkawi, Kedah. (pp. 564-569).

Abd Fatah, Abdul Yasser and Mohd Yusuff, Rosnah and Abdul Aziz, Faieza and Zulkifli, Norzima (2011) Simulation of "time-based" versus "sensor-based" traffic light system. In: 2011 IEEE 3rd International Conference on Communication Software and Networks (ICCSN 2011), 27-29 May 2011, Xi'an, China. (pp. 789-792).

Abd Rahman, Nurul Azlina and Ahmad Marican, Aziz Marzuki and Davies, Anthony Mark and Ab Kadir, Mohd Zainal Abidin and Abdullah, Noradlina (2011) A practical method for optimised earth electrode designs at transmission towers exposed to lightning. In: 2011 7th Asia-Pacific International Conference on Lightning (APL2011), 1-4 Nov. 2011, Chengdu, China. (pp. 131-134).

Abd. Rahman, Zubaidah and Mohamad, H. and Md. Yusoff, Nelidya and Mahdi, Mohd Adzir and Hitam, Salasiah and Abas, Ahmad Fauzi (2011) C-band ring cavity of virtual mirror BEFL with additional pump power. In: 2011 IEEE 2nd International Conference on Photonics, 17-19 Oct. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. .

Abdul Aziz, Mustafa Kamal and Morad, Noor Azian and Wambeck, Noel and Ismail, Mohd Halim Shah (2011) Optimizing palm biomass energy though size reduction. In: 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO 2011), 19-21 Apr. 2011, Kuala Lumpur, Malaysia. .

Abdul Rashid, Zulkifli and El-Harbawi, Mohanad and Ali, Sherif Abdulbari and Mohamed Shariff, Abdul Rashid (2011) Risk analysis for the road transportation of hazardous chemicals in Malaysia: a methodology. In: 2011 National Postgraduate Conference (NPC 2011), 19-20 Sept. 2011, Universiti Teknologi PETRONAS. .

Abdullah, Zul Hilmi and Udzir, Nur Izura and Mahmod, Ramlan and Samsudin, Khairulmizam (2011) File integrity monitor scheduling based on file security level classification. In: Second International Conference on Software Engineering and Computer Systems (ICSECS 2011), 27-29 June 2011, Kuantan, Pahang, Malaysia. (pp. 177-189).

Abu Bakar, Muhammad Hafiz and Abas, Ahmad Fauzi and Mokhtar, Makhfudzah and Mahdi, Mohd Adzir (2011) Bidirectionally-pumped remote L-band EDFA module utilizing stimulated Raman scattering. In: 2011 IEEE 2nd International Conference on Photonics, 17-19 Oct. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. .

Abubakar, Mohammed Shu'aibu and Ahmad, Desa and Othman, Jamarei and Sulaiman, Shamsuddin and Misron, Norhisam (2011) Evaluation of a dual-purpose chemical applicator for paddy fields. In: 2011 4th International Conference on Mechatronics (ICOM '11), 17-19 May 2011, Kuala Lumpur, Malaysia. (pp. 1-4).

Ahmad, Faisul Arif and Ramli, Abdul Rahman and Samsudin, Khairulmizam and Hashim, Shaiful Jahari (2011) Energy management in mobile robotics system based on biologically inspired honeybees behavior. In: 2011 IEEE Conference on Computer Applications and Industrial Electronics (ICCAIE 2011), 4-7 Dec. 2011, Penang, Malaysia. (pp. 32-35).

Ahmed, Shakil and Samsudin, Khairulmizam and Ramli, Abdul Rahman and Rokhani, Fakhrul Zaman (2011) Effective implementation of AES-XTS on FPGA. In: 2011 IEEE Region 10 Conference (TENCON 2011), 21-24 Nov. 2011, Bali, Indonesia. (pp. 184-186).

Aji, Suleiman and Zainudin, Edi Syam and Mohd Dahlan, Khairul Zaman and Abdan, Khalina and Salit, Mohd Sapuan (2011) Variation in tensile strength with eb-crosslinking of hybridized kenaf/palf reinforced hdpe composite. In: International Seminar on Strengthening of Collaboration for Jute, Kenaf and Allied Fibres R&D, 8-9 June 2011, Dhaka, Bangladesh. . (Unpublished)

Al-Alimi, Abdulmoghni Ali Wazae and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir and Mokhtar, Makhfudzah (2011) Realization of widely tunable Brillouin erbium doped fiber laser by using Brillouin stokes lines feedback control. In: 2011 IEEE 2nd International Conference on Photonics, 17-19 Oct. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. .

Al-Hasan, Yaseen Hasan Tahir and Ng, Chee Kyun and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin (2011) SP-AMC scheme for visual data transmisson over wireless fading channel. In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 856-861).

Al-Qazwini, Yusser and M. Thirunavakkarasu, Punithavathi and Muhammad Noor, Ahmad Shukri (2011) Numerical investigation of the performance of an SPR-based optical fiber sensor in an aqueous environment using finite-difference time domain. In: 2011 IEEE 2nd International Conference on Photonics, 17-19 Oct. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. .

Al-Surmi, Ibrahim and Othman, Mohamed and Abdul Hamid, Nor Asilah Wati and Mohd Ali, Borhanuddin (2011) Proactive low loss traffic mechanism during proxy MIPv6 handover over WLAN. In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 313-317).

Alhawari, Adam Reda Hasan and Ismail, Alyani and Mahdi, Mohd Adzir and Raja Abdullah, Raja Syamsul Azmir (2011) Tunable dual-band metamaterial using open stub-loaded stepped-impedance resonator. In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 496-500).

Alias, Nor Halaliza and Yunus, Robiah and Idris, Azni (2011) Effect of additives on lubrication properties of palm oil-based trimethylolpropane ester for hydraulic fluid application. In: 2011 3rd International Symposium & Exhibition in Sustainable Energy & Environment (ISESEE 2011), 1-3 June 2011, Melaka, Malaysia. (pp. 88-93).

Alomari, Mohammad Ahmed and Samsudin, Khairulmizam (2011) A framework for GPU-accelerated AES-XTS encryption in mobile devices. In: 2011 IEEE Region 10 Conference (TENCON 2011), 21-24 Nov. 2011, Bali, Indonesia. (pp. 144-148).

Alsahag, Ali Mohammed Mansoor and Mohd Ali, Borhanuddin and Noordin, Nor Kamariah and Mohamad, Hafizal (2011) Fair bandwidth assignment in hierarchical scheduling for mobile WiMAX system. In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 743-747).

Alshehri, Saleh and Khatun, Sabira and Jantan, Adznan and Raja Abdullah, Raja Syamsul Azmir and Mahmud, Rozi and Awang, Zaiki (2011) Experimental approximation of breast tissue permittivity and conductivity using NN-based UWB imaging. In: Second International Conference on Software Engineering and Computer Systems (ICSECS 2011), 27-29 June 2011, Kuantan, Pahang, Malaysia. (pp. 332-341).

Alshehri, Saleh Ali and Jantan, Adznan and Raja Abdullah, Raja Syamsul Azmir and Mahmud, Rozi and Khatun, Sabira and Awang, Zaiki (2011) A UWB imaging system to detect early breast cancer in heterogeneous breast phantom. In: International Conference on Electrical, Control and Computer Engineering (InECCE 2011), 21-22 June 2011, Kuantan, Pahang. (pp. 238-242).

Alvan, Habibeh Valizadeh and Azad, Farid Haydari (2011) Satellite remote sensing in earthquake prediction. A review. In: 2011 National Postgraduate Conference (NPC 2011), 19-20 Sept. 2011, Universiti Teknologi PETRONAS. .

Amoli, Golnush Masghati (2011) GIS-based risk map analysis of Leishmaniasis disease in Isfahan, Iran. In: 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2011), 25-28 Sept. 2011, Bayview Hotel, Langkawi, Kedah. (pp. 275-280).

Ariafar, Shahram and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Firoozi, Zahra (2011) Inter-cell and intra-cell layout design in a cellular manufacturing system. In: 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2011), 25-28 Sept. 2011, Bayview Hotel, Langkawi, Kedah. (pp. 28-33).

Arvin, Farshad and A. Majid, Huda and Hashim, Shaiful Jahari and Raja Abdullah, Raja Syamsul Azmir and M. Ali, Azizi and A. Rasid, Mohd Fadlee and Sali, Aduwati and Hashim, Fazirulhisyam and Ismail, Alyani (2011) Effects of emission from different UWB short-range communication devices. In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 875-879).

Azarbad, Bahman and Sali, Aduwati and Mohd Ali, Borhanuddin and Abdul Karim, Hezerul (2011) Study of BER in DVB-S2 satellite implemented in Matlab. In: 2011 IEEE International Conference on Space Science and Communication (IconSpace), 12-13 July 2011, Penang, Malaysia. (pp. 221-224).

Azari, Kian Ahmadi and Arintono, Sulistyo and Hamid, Hussain (2011) Modeling tourist's mode choice behavior under parking and cordon charge policies. In: 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO 2011), 19-21 Apr. 2011, Kuala Lumpur, Malaysia. .

Azimzadeh, Fatemeh and Ramli, Abdul Rahman and Mohd Ali, Borhanuddin and Ibrahim, Hamidah (2011) Incorporating information quality criteria in blog search engine. In: International Conference on Uncertainty Reasoning and Knowledge Engineering (URKE 2011), 4-7 Aug. 2011, Bali, Indonesia. (pp. 145-148).

Budayawan, Khairi and Mohd Isa, Maryam and Ismail, Alyani and Raja Abdullah, Raja Syamsul Azmir (2011) Implementation model of rectangular microstrip antenna with multilayer air gap. In: 2011 IEEE International RF and Microwave Conference (RFM 2011), 12-14 Dec. 2011, Seremban, Negeri Sembilan, Malaysia. (pp. 274-277).

Che Soh, Azura and Abdul Rahman, Ribhan Zafira and Lai, Ghuan Rhung and Md. Sarkan, Haslina (2011) Traffic signal control based on adaptive neural-fuzzy inference system applied to intersection. In: 2011 IEEE Conference on Open Systems (ICOS 2011), 25-28 Sept. 2011, Langkawi, Kedah. (pp. 231-236).

Cholan, Noran Azizan and Mahdi, Mohd Adzir and Al-Mansoori, Mohammed Hayder and Muhammad Noor, Ahmad Shukri and Ismail, Alyani (2011) Fiber optical parametric amplifier with dispersion flattened photonics crystal fiber as a gain medium. In: 2011 IEEE 2nd International Conference on Photonics, 17-19 Oct. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. .

Dehzangi, Arash and Larki, Farhad and Saion, Elias and Hutagalung, Sabar D. and Hamidon, Mohd Nizar and Hassan, Jumiah (2011) Field effect in silicon nanostructure fabricated by atomic force microscopy nano lithography. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2011), 28-30 Sept. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. (pp. 104-107).

Dodangeh, Javad and Mohd Yusuff, Rosnah (2011) A decision model for selecting of areas for improvement in EFQM model. In: 2011 IEEE International Conference on Quality and Reliability, 14-17 Sept. 2011, Bangkok, Thailand. (pp. 529-535).

Esfandiari, Ehsan and Mariun, Norman (2011) Bypassing the short-circuit faults in the switch-ladder multi-level inverter. In: 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA 2011), 25-28 Sept. 2011, Langkawi, Kedah. (pp. 128-132).

Forooshani, Arash Abtahi and Rokhani, Fakhrul Zaman (2011) Addressing fault tolerance in 4-PAM signaling by using block codes for on/off-chip communication. In: 2011 IEEE 9th International Conference on ASIC (ASICON 2011), 25-28 Oct. 2011, Xiamen, China. .

Forooshani, Arash Abtahi and Rokhani, Fakhrul Zaman and Samsudin, Khairulmizam and Behzadipour, Hamid (2011) Power - reliability tradeoff in low power 4-PAM signaling in on-chip communication. In: 3rd Asia Symposium on Quality Electronic Design (ASQED 2011), 19-20 July 2011, Kuala Lumpur, Malaysia. (pp. 109-114).

Hamzah, Muhammad Hazwan and Sudin, S. S. and Tengku Ab Mutalib, T. N. A. and Ab. Malek, N. F. H. and Yusof, N. and Jamaludin, Hishamuddin and Jamaludin, N. F. and Che Man, Hasfalina and Zainal Abidin, Zurina (2011) Preliminary study of ohmic heated hydro distillation for essential oil's plant extraction. In: 2011 IEEE Student Conference on Research and Development (SCOReD), 19-20 Dec. 2011, Cyberjaya, Malaysia. (pp. 211-214).

Harun, Harlisya and Ungku Chulan, Ungku Azmi Iskandar and Khazani, Khamizon (2011) Improving the evaluation performance of space-time trellis code through visualisation. In: 15th International Conference On Information Visualization, 13-15 July 2011, London, United Kingdom. (pp. 471-474).

Hussein, Ahmed Naser and Mashohor, Syamsiah and Saripan, M. Iqbal (2011) A texture-based approach for content based image retrieval system for plant leaves images. In: 2011 IEEE 7th International Colloquium on Signal Processing and its Applications (CSPA 2011), 4-6 Mar. 2011, Penang, Malaysia. (pp. 11-14).

Hussein, Yaseein Soubhi and Mohd Ali, Borhanuddin and Varahram, Pooria (2011) On fractional and semi-soft handover in long term evolution(LTE) networks. In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 48-52).

Ismail, Luthffi Idzhar and Shamsuddin, Syamimi and Yussof, Hanafiah and Shaari, Mohd Saiful Bahari and Jaffar, Ahmed and Zahari, Nur Ismarrubie (2011) Face detection technique of Humanoid Robot NAO for application in robotic assistive therapy. In: 2011 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2011), 25-27 Nov. 2011, Penang, Malaysia. (pp. 517-521).

Jahan, Mohammad Saukat and Sali, Aduwati and Azarbad, Bahman and Usaha, Wipawee and A. Rasid, Mohd Fadlee and Mohd Ali, Borhanuddin (2011) Energy efficient geographical and power based clustering algorithm for heterogeneous wireless sensor networks. In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 826-831).

Jordehi, Ahmad Rezaee and Jasni, Jasronita (2011) Heuristic methods for solution of FACTS optimization problem in power systems. In: 2011 IEEE Student Conference on Research and Development (SCOReD), 19-20 Dec. 2011, Cyberjaya, Malaysia. (pp. 30-35).

Jordehi, Ahmad Rezaee and Joorabian, Mahmood (2011) Optimal placement of multi-type FACTS devices in power systems using evolution strategies. In: 5th International Power Engineering and Optimization Conference (PEOCO2011), 6-7 June 2011, Shah Alam, Selangor, Malaysia. (pp. 352-357).

Karami, Mahdi and Mariun, Norman and Ab Kadir, Mohd Zainal Abidin (2011) Determining optimal location of static VAR compensator by means of genetic algorithm. In: International Conference on Electrical, Control and Computer Engineering (InECCE 2011), 21-22 June 2011, Kuantan, Pahang. (pp. 172-177).

Karasfi, Babak and Tang, Sai Hong and Jalalian, Afsaneh and Nakhaeinia, Danial (2011) Speedup robust features based unsupervised place recognition for assistive mobile robot. In: 2011 International Conference on Pattern Analysis and Intelligent Robotics (ICPAIR 2011), 28-29 June 2011, Putrajaya, Malaysia. (pp. 97-102).

Kenari, Seyed Ali Jafari and Mashohor, Syamsiah (2011) Robust combining methods in committee neural networks. In: 2011 IEEE Symposium on Computers & Informatics (ISCI 2011), 20-22 Mar. 2011, Kuala Lumpur, Malaysia. (pp. 18-22).

Kharazi, Seyed Mohammad Saleh Seyedzadeh and Mahdiraji, Ghafour Amouzad and Sahbudin, Ratna Kalos Zakiah and Mokhtar, Makhfudzah and Abas, Ahmad Fauzi and Ahmad Anas, Siti Barirah (2011) Performance analysis of a variable-weight OCDMA system under the impact of fiber impairments. In: 2011 IEEE 2nd International Conference on Photonics, 17-19 Oct. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. .

Law, Kah Haw and Dahidah, Mohamed and Mariun, Norman (2011) Cascaded multilevel inverter based STATCOM with power factor correction feature. In: 2011 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology (STUDENT), 20-21 Oct. 2011, The University of Nottingham, Semenyih, Selangor, Malaysia. (pp. 12-18).

Lima, Reza Mehryari and Zahari, Nur Ismarrubie and Zainudin, Edi Syams and Tang, Sai Hong (2011) Axial behavior of steel tube wrapped by composite as energy absorber under compressive load. In: 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2011), 25-28 Sept. 2011, Bayview Hotel, Langkawi, Kedah. (pp. 10-15).

Lioe, De Xing and Shafie, Suhaidi and Ramiah, Harikrishnan (2011) Low power BPSK modulator for the application of capsule endoscope. In: 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO 2011), 19-21 Apr. 2011, Kuala Lumpur, Malaysia. .

Lioe, De Xing and Shafie, Suhaidi and Ramiah, Harikrishnan (2011) Low power modulator for the application of capsule endoscope. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2011), 28-30 Sept. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. (pp. 182-185).

Lutfy, Omar F. and Mohd Noor, Samsul Bahari and Marhaban, Mohammad Hamiruce (2011) A genetically trained simplified ANFIS controller to control nonlinear MIMO systems. In: International Conference on Electrical, Control and Computer Engineering (InECCE 2011), 21-22 June 2011, Kuantan, Pahang. (pp. 349-354).

Mahdiraji, Ghafour Amouzad and Abas, Ahmad Fauzi (2011) Effect of optical filtering on the performance of 40 Gbps DCDM systems. In: 2011 IEEE 2nd International Conference on Photonics, 17-19 Oct. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. .

Mamdoohi, Ghazaleh and Saniei, S. and Abas, Ahmad Fauzi and Samsudin, Khairulmizam and Hidayat, Ariya and Ibrahim, Noor Hisham and Mahdi, Mohd Adzir (2011) Enhancement of polarization controller characterization using genetic algorithm. In: 2011 IEEE 2nd International Conference on Photonics, 17-19 Oct. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. .

Mansouri, Solmaz Rastegar Moghaddam and Aris, Ishak and Abdul Halin, Izhal (2011) Hibernating switched current cells for low power 14-bit Digital to Analog Converters. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2011), 28-30 Sept. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. (pp. 202-206).

Mariun, Norman and Mehrjou, Mohammad Rezazadeh and Marhaban, Mohammad Hamiruce and Misron, Norhisam (2011) An experimental study of induction motor current signature analysis techniques for incipient broken rotor bar detection. In: 2011 International Conference on Power Engineering, Energy and Electrical Drives (PowerEng2011), 11-13 May 2011, Torremolinos (Málaga), Spain. (pp. 1-5).

Marzook, Ali Kamil and Ismail, Alyani and Mohd Ali, Borhanuddin and Sali, Aduwati and Al-Ali, Mohannad Hamed Khalaf and Khatun, Sabira (2011) Analysis of joint channel estimation and joint data detection in TD-SCDMA systems. In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 692-697).

Md Ali, Mas Izyani and Musa, Baktiar and Muhammad Noor, Ahmad Shukri and Ahmad Anas, Siti Barirah and Abdul Kadir @ Jaafar, Muhammad Zamzuri and Mahdi, Mohd Adzir (2011) Characterization of tapered-erbium doped fiber in co-propagating amplifier. In: 2011 IEEE 2nd International Conference on Photonics, 17-19 Oct. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. .

Md Yunus, Nurul Amziah and Jaafar, Haslina and Green, Nicolas G. (2011) Process for the determination of thickness of polymeric microchannels for microfluidic applications. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2011), 28-30 Sept. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. (pp. 344-348).

Md. Yusoff, Nelidya and Abd. Rahman, Zubaidah and Sulaiman, Abdul Hadi and Abas, Ahmad Fauzi and Hitam, Salasiah and Mahdi, Mohd Adzir (2011) Gain-flattened dual-stage L-band EDFA by using pump power distribution. In: 2011 IEEE 2nd International Conference on Photonics, 17-19 Oct. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. .

Mehdizadeh, Abbas and Hashim, Fazirulhisyam and Raja Abdullah, Raja Syamsul Azmir and Mohd Ali, Borhanuddin and Othman, Mohamed (2011) Quality-improved and secure multicast delivery method in mobile IPv6 networks. In: Sixteenth IEEE Symposium on Computers and Communications (ISCC 2011), 28 June-1 July 2011, Kerkyra (Corfu), Greece. (pp. 538-543).

Mesrinejad, Farhad and Hashim, Fazirulhisyam and Noordin, Nor Kamariah and A. Rasid, Mohd Fadlee and Raja Abdullah, Raja Syamsul Azmir (2011) The effect of fragmentation and header compression on IP-based sensor networks (6LoWPAN). In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 845-849).

Misbah, Nor Ratna and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima (2011) Modelling and analysis of different aspect of mechanisms in lightning injury. In: 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO 2011), 19-21 Apr. 2011, Kuala Lumpur, Malaysia. .

Misron, Norhisam and Ng, Seng Shin and Raja Othman, Raja Nor Firdaus Kashfi and Abdul Wahab, Noor Izzri and Ahmad, Desa and Nirei, Masami (2011) Reduction of cogging torque of single phase brushless DC motor using flux barrier. In: 2011 IEEE Student Conference on Research and Development (SCOReD), 19-20 Dec. 2011, Cyberjaya, Malaysia. (pp. 300-303).

Misron, Norhisam and Ng, Wei Shin and Marhaban, Mohammad Hamiruce and Shafie, Suhaidi (2011) Magnetic imaging of ferromagnetic shape with Mobile Hall Sensor Array system. In: 2011 IEEE International Conference on Signal and Image Processing Applications (ICSIPA 2011), 16-18 Nov. 2011, Kuala Lumpur, Malaysia. (pp. 1-6).

Mohamad, Hafizah and Md. Yusoff, Nelidya and Abu Bakar, Muhammad Hafiz and Shahabuddin, Nurul Shahrizan and Abdul Rashid, Hairul Azhar and Yusoff, Zulfadzli and Ismail, Alyani and Ahmad Anas, Siti Barirah and Mahdi, Mohd Adzir (2011) Ultrashort pulse laser generation in ring-type EDFL using carbon-nanotube saturable absorber. In: 2011 IEEE 2nd International Conference on Photonics, 17-19 Oct. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. .

Mohamad, Mahmod Abd Hakim and Basri, Shahnor and Basuno, Bambang (2011) One-dimensional high-order compact method for solving Euler's equations. In: 4th International Meeting of Advances in Thermofluids (IMAT 2011), 3-4 Oct. 2011, Melaka, Malaysia. (pp. 806-818).

Mohammadi, Ahmad and Ismail, Alyani and Mahdi, Mohd Adzir and Raja Abdullah, Raja Syamsul Azmir and Mohd Isa, Maryam and Azarbad, Bahman (2011) Carbon nanotube - poly pyrrol based microwave resonant circuit for napropamide detection. In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 890-893).

Mohammadpoor, Mojtaba and Raja Abdullah, Raja Syamsul Azmir and Ismail, Alyani and Abas, Ahmad Fauzi (2011) A Linear Frequency Modulated bistatic radar for on-the-ground object detection. In: 2011 IEEE CIE International Conference on Radar (RADAR 2011), 24-27 Oct. 2011, Chengdu, China. (pp. 63-66).

Mohammady, Somayeh and Mohd Sidek, Roslina and Varahram, Pooria and Hamidon, Mohd Nizar and Sulaiman, Nasri (2011) FPGA implementation of the proposed DSI-SLM scheme for PAPR reduction in OFDM systems. In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 484-487).

Mohammady, Somayeh and Mohd Sidek, Roslina and Varahram, Pooria and Hamidon, Mohd Nizar and Sulaiman, Nasri (2011) Study of PAPR reduction methods in OFDM systems. In: 13th International Conference on Advanced Communication Technology (ICACT2011), 13-16 Feb. 2011, Seoul, South Korea. (pp. 127-130).

Mohammady, Somayeh and Mohd Sidek, Roslina and Varahram, Pooria and Hamidon, Mohd Nizar and Sulaiman, Nasri (2011) A new DSI-SLM method for PAPR reduction in OFDM systems. In: 2011 IEEE International Conference on Consumer Electronics (ICCE), 9-12 Jan. 2011, Las Vegas, Nevada, USA. (pp. 369-370).

Mohd Arif, Nor Azhar and Abdul Karim, Hezerul and Mohamad, Hafizal and Sali, Aduwati and Mokhtar, Mohd Ridzuan (2011) User perception evaluations of 3D video telephony as compared to actual experience for face-to-face immersive communications. In: 15th IEEE International Symposium on Consumer Electronics (ISCE 2011), 14-17 June 2011, Singapore. (pp. 602-606).

Mohd Bazir, Amira Afiqah and Ramli, Khairul F. and Ibrahim, Nur S. and Lim, Y. Pying and Rokhani, Fakhrul Zaman (2011) Mobile robot guidance using light dependant resistor device. In: 2011 IEEE 7th International Colloquium on Signal Processing and its Applications (CSPA 2011), 4-6 Mar. 2011, Penang, Malaysia. (pp. 507-511).

Mohd Nawi, Zawati and Ab Kadir, Mohd Zainal Abidin and Wan Ahmad, Wan Fatinhamamah (2011) On the placement of line arrester on underbuilt overhead distribution line. In: 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO 2011), 19-21 Apr. 2011, Kuala Lumpur, Malaysia. .

Mohd Zaini, Mohd Hanif and Ahmad, Siti Anom (2011) Surgical and non-surgical prosthetic hands control: a review. In: 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA 2011), 25-28 Sept. 2011, Langkawi, Kedah. (pp. 634-637).

Mohd Zaini, Mohd Hanif and Ahmad, Siti Anom and Marhaban, Mohammad Hamiruce and Wan Hasan, Wan Zuha (2011) UPM prosthetic hand system design - preliminary results. In: 2011 IEEE Student Conference on Research and Development (SCOReD), 19-20 Dec. 2011, Cyberjaya, Malaysia. (pp. 174-177).

Mohd Zulkifli, Nurin Wahidah and Kalam, Md. Abul and Yunus, Robiah and Hassan, Masjuki (2011) Anti-wear characteristics of jatropha trimethylolpropane (TMP) ester. In: Regional Tribology Conference (RTC 2011), 22-24 Nov. 2011, Bayview Hotel, Langkawi Island, Malaysia. (pp. 58-63).

Musa, Baktiar and Ismail, Alyani and Abdul Aziz, Rozi and Muhammad Noor, Ahmad Shukri and Mahdi, Mohd Adzir (2011) Effect of fiber profile parameters on the transmission properties of the tapered optical fibers. In: IEEE 2nd International Conference on Photonics, 17-19 Oct. 2011 , Kota Kinabalu, Sabah. (pp. 1-4).

Mustaffa, Nurul Akmil and Abdullah, Luqman Chuah and Ahmad @ Ayob, Mansor and Mohd Dahlan, Khairul Zaman (2011) Improved mechanical properties of HDPE/nano-alumina composite through silane coupling agent. In: International Conference on Nanotechnology - Research and Commercialization 2011 (ICONT 2011), 6-9 June 2011, Sabah, Malaysia. (pp. 500-510).

Nasrudin, Nurfarhana and Ilis, Nur Malina and Tan, P. Juin and Tan, Terry Kwang Chun and Loo, Wei Zhe and Rokhani, Fakhrul Zaman (2011) Analysis of the light dependent resistor configuration for line tracking robot application. In: 2011 IEEE 7th International Colloquium on Signal Processing and its Applications (CSPA 2011), 4-6 Mar. 2011, Penang, Malaysia. (pp. 500-502).

Ong, Wen Jian and Samsudin, Khairulmizam and Ramli, Abdul Rahman and Wan Adnan, Wan Azizun (2011) Modeling graphic subsystem for M5 simulator. In: 2011 IEEE Conference on Open Systems (ICOS 2011), 25-28 Sept. 2011, Langkawi, Kedah. (pp. 294-299).

Raja Abdullah, Raja Syamsul Azmir and Mohammadpoor, Mojtaba and Ismail, Alyani and Abas, Ahmad Fauzi (2011) A multistatic circular synthethic aperture radar for small object detection. In: 2011 IEEE Radar Conference (RADAR), 23-27 May 2011, Kansas City, Missouri. (pp. 262-266).

Raja Othman, Raja Nor Firdaus Kashfi and Misron, Norhisam and Mariun, Norman and Aris, Ishak and Ahmad, Desa and Nirei, Masami and Wakiwaka, Hiroyuki (2011) Torque characteristics of small size single and double stator brushless permanent magnet motor. In: 2011 IEEE Student Conference on Research and Development (SCOReD), 19-20 Dec. 2011, Cyberjaya, Malaysia. (pp. 52-57).

Sadeghi, Mohammad Mehdi Gilanian and Mohd Ali, Borhanuddin and Ma, Maode and Ab Manan, Jamalul-lail and Noordin, Nor Kamariah and Khatun, Sabira (2011) Scalable rekeying algorithm in IEEE 802.16e. In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 726-730).

Saniei, Soodeh Zahab and Mamdoohi, Ghazaleh and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir and Saraf, M. (2011) Variable sensitivity laser range finder receiver. In: IEEE 2nd International Conference on Photonics, 17-19 Oct. 2011, Kota Kinabalu, Sabah. (pp. 1-5).

Sayeed, Md. Shohel and Ramli, Abdul Rahman and Hossen, Md. Jakir and Samsudin, Khairulmizam and Rokhani, Fakhrul Zaman (2011) A hybrid-based modified adaptive fuzzy inference engine for pattern classification. In: 2011 11th International Conference on Hybrid Intelligent Systems (HIS), 5-8 Dec. 2011, Melaka, Malaysia. (pp. 295-300).

Shamsuddin, Syamimi and Ismail, Luthffi Idzhar and Yussof, Hanafiah and Zahari, Nur Ismarrubie and Shaari, Mohd Saiful Bahari and Hashim, Hafizan and Jaffar, Ahmed (2011) Humanoid robot NAO: review of control and motion exploration. In: 2011 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2011), 25-27 Nov. 2011, Penang, Malaysia. (pp. 511-516).

Shojanazeri, Hamid and Wan Adnan, Wan Azizun and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Saripan, M. Iqbal (2011) Analysis of watermarking techniques in video. In: 2011 11th International Conference on Hybrid Intelligent Systems (HIS), 5-8 Dec. 2011, Melaka, Malaysia. (pp. 486-492).

Si Toh, Chooi Ling and Ng, Chee Kyun and Noordin, Nor Kamariah (2011) Melody to musical notation translating system. In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 884-889).

Sulaiman, Abdul Hadi and Abdul Kadir @ Jaafar, Muhammad Zamzuri and Md. Yusoff, Nelidya and Hitam, Salasiah and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir (2011) Wavelength-spacing tunable S-band multi-wavelength fiber laser based on Lyot filter. In: 2011 IEEE 2nd International Conference on Photonics, 17-19 Oct. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. .

Syam, Syafiie and Chong, P. K. and Chang, Jing Jing (2011) Isoflurane inhalation regulated using positive system. In: 2011 Australian Control Conference, 10-11 Nov. 2011, Melbourne, Australia. (pp. 464-468).

Taherzadeh, Ebrahim and Mohd Shafri, Helmi Zulhaidi (2011) Using hyperspectral remote sensing data in urban mapping over Kuala Lumpur. In: 2011 Joint Urban Remote Sensing Event (JURSE 2011), 11-13 Apr. 2011, Munich, Germany. (pp. 405-408).

Tan, Lee Woun and Taip, Farah Saleena and Ibrahim, Mohd Nordin and Raja Ahmad, Raja Mohd Kamil (2011) Empirical modeling and control for spray drying of orange juice powder. In: 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO 2011), 19-21 Apr. 2011, Kuala Lumpur, Malaysia. .

Tan, Yen Chen and Abdullah, Luqman Chuah and Tan, Poh Aun (2011) Preparation of meteorological input for AERMOD using Malaysian meteorological data. In: 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO 2011), 19-21 Apr. 2011, Kuala Lumpur, Malaysia. .

Teh, Kent How and Ng, Wei Lun and Ng, Chee Kyun and Noordin, Nor Kamariah (2011) Home appliances management system using Controller Area Network (CAN). In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 899-904).

Tew, X. W. and Khalid, Nurul Izzah and Ab. Aziz, Norashikin and Taip, Farah Saleena and Anuar, Mohd Shamsul (2011) A conceptual design of fouling deposit adhesiveness gauge. In: 4th International Meeting of Advances in Thermofluids (IMAT 2011), 3-4 Oct. 2011, Melaka, Malaysia. (pp. 578-585).

Ting, Kok Seng and Ee, Gee Keng and Ng, Chee Kyun and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin (2011) The performance evaluation of IEEE 802.11 against IEEE 802.15.4 with low transmission power. In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 850-855).

Torshizi, Seyed Dawood Sajjadi and Rostampour, Samad and Tanha, Maryam (2011) New secure and low-cost design for defense in depth implementation using open source software. In: 2011 IEEE Student Conference on Research and Development (SCOReD), 19-20 Dec. 2011, Cyberjaya, Malaysia. (pp. 448-453).

Tuan Abdul Rahman, Tuan Ahmad Zahidi and Mat Darus, Intan Zaurah (2011) Active vibration control of a flexible plate via active force control strategy. In: 2011 4th International Conference on Mechatronics (ICOM '11), 17-19 May 2011, Kuala Lumpur, Malaysia. .

Tuan Abdul Rahman, Tuan Ahmad Zahidi and Mat Darus, Intan Zaurah (2011) Experimental evaluation of active vibration control of a flexible plate using proportional gain controller. In: 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA 2011), 25-28 Sept. 2011, Langkawi, Kedah. (pp. 382-386).

Tung, Li Qian and Shafie, Suhaidi and Saripan, M. Iqbal (2011) A local tone mapping operator for high dynamic range images. In: 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO 2011), 19-21 Apr. 2011, Kuala Lumpur, Malaysia. .

Tung, Li Qian and Shafie, Suhaidi and Saripan, M. Iqbal (2011) A new technique to reproduced high-dynamic-range images for low-dynamic-range display. In: 2011 IEEE International Conference on Signal and Image Processing Applications (ICSIPA 2011), 16-18 Nov. 2011, Kuala Lumpur, Malaysia. (pp. 399-403).

Vaithilingam, Chockalingam Aravind and Misron, Norhisam and Aris, Ishak and Marhaban, Mohammad Hamiruce and Ahmad, Desa and Nirei, Masami (2011) Double-Rotor Switched Reluctance Machine (DRSRM): fundamentals and magnetic circuit analysis. In: 2011 IEEE Student Conference on Research and Development (SCOReD), 19-20 Dec. 2011, Cyberjaya, Malaysia. (pp. 294-299).

Varahram, Pooria and Mohd Ali, Borhanuddin (2011) FPGA implementation of novel peak-to-average power ratio reduction in orthogonal frequency division multiplexing systems. In: 17th Asia-Pacific Conference on Communications (APCC 2011), 2-5 Oct. 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia. (pp. 264-268).

Varahram, Pooria and Mohd Ali, Borhanuddin and Al-Azzo, Wisam Fahmi (2011) Low complexity ADRG-PTS scheme for PAPR reduction in OFDM systems. In: 13th International Conference on Advanced Communication Technology (ICACT2011), 13-16 Feb. 2011, Seoul, South Korea. (pp. 331-334).

Wan Hasan, Wan Zuha and Abdul Halin, Izhal and Shafie, Suhaidi and Othman, Masuri (2011) An efficient diagnosis march-based algorithm for coupling faults in SRAM. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2011), 28-30 Sept. 2011, Le Meridien Hotel, Kota Kinabalu, Sabah. (pp. 198-201).

Yeo, Che Yong and Syed Mohamed, Syed Abdul Rahman Al-Haddad and Ng, Chee Kyun (2011) Animal voice recognition for identification (ID) detection system. In: 2011 IEEE 7th International Colloquium on Signal Processing and its Applications (CSPA 2011), 4-6 Mar. 2011, Penang, Malaysia. (pp. 198-201).

Yusof, Yus Aniza and Mohd Din, S. N. and Chin, Nyuk Ling and Anuar, Mohd Shamsul (2011) Stress relaxation of selected viscoelastic herbs. In: Regional Tribology Conference (RTC 2011), 22-24 Nov. 2011, Bayview Hotel, Langkawi Island, Malaysia. (pp. 11-15).

Zakaria, Nor Azura and Wan Hasan, Wan Zuha and Abdul Halin, Izhal and Mohd Sidek, Roslina and Wen, Xiaoqing (2011) Testing static single cell faults using static and dynamic data background. In: 2011 IEEE Student Conference on Research and Development (SCOReD), 19-20 Dec. 2011, Cyberjaya, Malaysia. (pp. 1-6).

Zulkifli, Norzima and Alimoradi, A. and Yusuff, R. M. (2011) Developing A Hybrid Model For Remanufacturing Facility Location Problem In A Closed Loop Supply Chain. In: 3rd International Technology Innovation and Industrial Management, Oulu,Finland. .

Inaugural Lecture

Mariun, Norman (2011) Energy crisis 2050?: global scenario and way forward for Malaysia. [Inaugural Lecture]

Patent

Mohd Zainal Abidin Ab Kadir (2011) Low cost surge protective device for communication and data line systems. PI2011001775.

Mohd Zainal Abidin Ab Kadir (2011) Surge protective device for low voltage equipment. PI2011001320.

Ahmad Fauzi Abas @ Ismail (2011) Compact high power laser source. PI2011001281.

Ahmad Fauzi Abas @ Ismail (2011) A duty cycle division multiplexing with amplitude distribution controller transmitter. PI2011000019.

Khalina Abdan (2011) A process of bonding between a lignocelluloses fiber and polymer. UNSPECIFIED.

Abd. Rahim Abu Talib (2011) Safety syringe. PI2011700110.

Desa Ahmad (2011) A pneumatic seeding machine. PI2011000816.

Aidy Ali (2011) A functionally graded material disk and method for fabricating thereof. PI2011000745.

Ishak Aris (2011) Linear motor. PI2011005987.

Ishak Aris (2011) A spray gun. PI2011005991.

Ishak Aris (2011) An electronic language teaching system for visual-disabled. PI2011006274.

Mohd Nizar Hamidon (2011) Film paste and its preparation thereof. PI2011004441.

Harlisya Harun (2011) A method and system for determining optimal G. PI2011003795.

Azni Idris (2011) A method for producing a biopolymer. PI2011005282.

Ling Tau Chuan (2011) Method for purifying serine protease recovered from a fruit source. PI2011003714.

Ling Tau Chuan (2011) Method for the purification of interferon. PI2011000150.

Norman Mariun (2011) An ohmic heating system for pasteurizing fluid medium. UNSPECIFIED.

Norhisam Misron (2011) A permanent magnet motor. PI2011700043.

Norhisam Misron (2011) A motorized cutter. UI2011003335.

Abdul Rashid Mohamed Sharif (2011) A method for determining ripeness of an oil palm fruit bunch. PI2011005988.

Borhanuddin Mohd. Ali (2011) A method of reducing peak-to-average power ratio (PAPR). PI2011003715.

Makhfudzah Mokhtar (2011) Methods for performing error correction and a system thereof. PI2011001005.

Saari bin Mustapha (2011) Palm oil based polyurethane/clay nano composite. UNSPECIFIED.

Barkawi Sahari (2011) Wobble plate compressor. UNSPECIFIED.

Rosnah Shamsuddin (2011) A rolled cookie machine. UNSPECIFIED.

Syed Abd. Rahman Al-Hadad Syed Mohamed (2011) A media content sharing system. PI2011700015.

Tang Sai Hong (2011) A light low-cost self-balancing hexapod. PI2011002714.

Azmi Yahya (2011) Transplanter for plant seedlings. UNSPECIFIED.

Robiah Yunus (2011) A method for producing polymer-encapsulated nanoparticles. PI2011003395.

Robiah Yunus (2011) A method of producing bio-diesel. PI 20093286.

Zurina Zainal Abidin (2011) Coagulant agent for water treatment. PI2011700007.

Thesis

Abd Hamid, Hamidah (2011) Simulation of extended reaction kinetics of palm oil-based polyol esters synthesis. Masters thesis, Universiti Putra Malaysia.

Abd Manab, Mohd Fairuz (2011) Development of material selection expert system for polymer-based composite materials. Masters thesis, Universiti Putra Malaysia.

Abd. Rahman, Zubaidah (2011) All-optical multiwavelength fiber lasers based on stimulated brillouin scattering. Masters thesis, Universiti Putra Malaysia.

Abdelhameed Mokhtar, Rania (2011) Enhanced distributed cooperative spectrum sensing for cognitive radio networks. PhD thesis, Universiti Putra Malaysia.

Abdollahi, Mohammadreza (2011) Design and evaluation on adaptive fuzzy speed control of mobile robot. Masters thesis, Universiti Putra Malaysia.

Abdul Halif, Norzilah (2011) Synthesis of carbon nanomaterials using chemical vapor deposition technique for liquid adsorption. PhD thesis, Universiti Putra Malaysia.

Abdullah, Abdul Hakim (2011) Tensile and fatigue properties of unidirectional kenaf fibre reinforced epoxy composites. Masters thesis, Universiti Putra Malaysia.

Abdullah, Ami Nurul Nazifah (2011) Development of multi-type interior permanent magnet motor. Masters thesis, Universiti Putra Malaysia.

Abdullah, Norazlin (2011) Optimisation of kitchen waste composting. Masters thesis, Universiti Putra Malaysia.

Abu Bakar, Hafizal (2011) Development of database acquisition system for external balance device in low-speed wind tunnel. Masters thesis, Universiti Putra Malaysia.

Abubakar, Mohammed Shu'aibu (2011) Development of dual-purpose disc agrochemical applicator for field crops. PhD thesis, Universiti Putra Malaysia.

Adnan, Sharmeen (2011) Impregnation of in-house synthesized carbon nanotubes in bacterial cellulose. Masters thesis, Universiti Putra Malaysia.

Ahmed, Thamer H. (2011) Synthesis and characterization of carbon nanotubes in a vertical floating catalyst chemical vapour deposition reactor. Masters thesis, Universiti Putra Malaysia.

Akande, Fatai Bukola (2011) Motion resistance analyses of towed narrow wheels. PhD thesis, Universiti Putra Malaysia.

Akil, Mustapha (2011) Bacteria cellulose from A.xylinum fermentation using hydrolysate of banana-peel waste as carbon source. Masters thesis, Universiti Putra Malaysia.

Akorede, Mudathir Funsho (2011) Optimisation of distributed generation in electric power systems using fuzzy-genetic algorithm approach. PhD thesis, Universiti Putra Malaysia.

Al-Asadi, Hamid Ali Abed (2011) Analytical modeling, experimental investigation and applications of stimulated Brillouin scattering in optical fibers. PhD thesis, Universiti Putra Malaysia.

Al-Gorafi, Mohammed Abdulla Ismail (2011) Effect of torsion on externally prestressed segmented box bridge girder. PhD thesis, Universiti Putra Malaysia.

Al-Hasan, Yaseen Hasan Tahir (2011) Performance enhancement of high data rate real-time wireless transmission system using superposition coding and unequal error protection. PhD thesis, Universiti Putra Malaysia.

Al-Khodari, M. Saleh Basha (2011) Optimum spacecraft attitude control methods for a combined attitude and thermal control system. PhD thesis, Universiti Putra Malaysia.

Al-Obaidi, Mohammed Mahmoud Ahmad (2011) Catalytic gasification of empty fruit bunch for tar-free hydrogen rich-gas production. PhD thesis, Universiti Putra Malaysia.

Alshehri, Saleh Ali (2011) Ultra wideband technique for breast cancer detection using multi-layer feed-forward neural networks. PhD thesis, Universiti Putra Malaysia.

Amid, Mehrnoush (2011) Effects of extraction, purification and freeze drying conditions on enzymatic properties of serine protease from mango (Mangifera Indica L. Cv.Chokanan) peel. PhD thesis, Universiti Putra Malaysia.

Anisseh, Mohammad (2011) Development of group decision making model under fuzzy environment. PhD thesis, Universiti Putra Malaysia.

Anuar, Laili Hayati (2011) 3D face registration across pose variation and facial expression using cross profile alignment. Masters thesis, Universiti Putra Malaysia.

Asnawi, (2011) Effects of hydrogen enrichment on compressed natural gas engine performance and emissions. Masters thesis, Universiti Putra Malaysia.

Bakhshipour, Zeinab (2011) Delineation of karst terrain using resistivity method. Masters thesis, Universiti Putra Malaysia.

Balafar, Mohammad Ali (2011) Segmentation of MRI brain images using statistical approaches. PhD thesis, Universiti Putra Malaysia.

Beh, Chin Lai (2011) Utilization of steel industry slag for removal of copper and manganese. PhD thesis, Universiti Putra Malaysia.

Bidhandi, Hadi Mohammadi (2011) Development of improved solution methods for deterministic and stochastic supply chain network design. Doctoral thesis, Universiti Putra Malaysia.

Ceesay, Omar M. (2011) Dynamic area coverage algorithms for static and mobile wireless sensor network environments using voronoi techniques. Masters thesis, Universiti Putra Malaysia.

Chew, Few Ne (2011) Production and electrophoresis-based purification of recombinant green fluorescent protein from Escherichia coli. PhD thesis, Universiti Putra Malaysia.

Chia, Su Ling (2011) Effects of ultraviolet irradiation on physicochemical, microbiological, and rheological properties of pineapple (Ananas comoscus L. var. yankee) juice. Masters thesis, Universiti Putra Malaysia.

Davoodi, Seyed Rasoul (2011) Motorcycle - stopping sight distance model for geometric design of exclusive motorcycle lanes. PhD thesis, Universiti Putra Malaysia.

Deepak, T.J. (2011) Web based participatory irrigation management for Tanjung Karang irrigation scheme, Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Dezfouli, Mohammad Mehdi Salehi (2011) Impact behaviour of composite plate with embedded piezoelectric sensor. Masters thesis, Universiti Putra Malaysia.

Din, Amad Ud (2011) Design of standard CMOS time-of-flight pixel using charge transfer efficiency method. Masters thesis, Universiti Putra Malaysia.

Esfandiari, Ehsan (2011) Development of staircase-output multilevel inverter. PhD thesis, Universiti Putra Malaysia.

Faez, Seyed Farzin (2011) Development of service performance index for exclusive motorcycle lanes in Malaysia. PhD thesis, Universiti Putra Malaysia.

Fatemi, Seyed Mahdi (2011) Water management optimization model for the Razmgan agricultural district in Khorasan province, Iran. Masters thesis, Universiti Putra Malaysia.

Firoozi, Zahra (2011) Development of location-inventory model based on all-unit quantity discount policy. Masters thesis, Universiti Putra Malaysia.

Ghahraei, Omid (2011) Design and development of kenaf harvesting machine. PhD thesis, Universiti Putra Malaysia.

Ghassemi, Mohammad Hadi (2011) Designing a tracked prime mover for in-field collection and transportation of oil palm fresh fruit bunches on low bearing capacity peat terrain. Masters thesis, Universiti Putra Malaysia.

Ghezavati, Hamidreza (2011) Determination of optimum location for carbon monoxide detectors in car cabins. PhD thesis, Universiti Putra Malaysia.

Ghiji, Mohammadmahdi (2011) Computational fluid dynamic analysis of knock onset in diesel dual-fuel engine. Masters thesis, Universiti Putra Malaysia.

Hadi, Agung Efriyo (2011) Characterisation and optimisation of mechanical, physical and thermal properties of short abaca (musa textile nee) fibre reinforced high impact polystyrene composites. PhD thesis, Universiti Putra Malaysia.

Haghizadeh, Ali (2011) Flood modeling for the Neka catchment in Mazandaran province, Northern Iran. PhD thesis, Universiti Putra Malaysia.

Hamza, Bashar Jabbar (2011) Seamless vertical handover between 3g universal mobile telecommunications system and wireless LAN with modified mobile stream control transmission protocol. PhD thesis, Universiti Putra Malaysia.

Harun, Mohd Yusof (2011) Production of bioethanol from pretreated water hyacinth (Eichhornia crassipes (Mart.) solms) by Saccharomyces cerevisiae. Masters thesis, Universiti Putra Malaysia.

Hassan, Mohd Khair (2011) Development of control strategy of electronic control unit for compressed natural gas direct injection engine. PhD thesis, Universiti Putra Malaysia.

Ho, Angelina Mei Yi (2011) Heat transfer analysis of tomato root zone temperature cooled by chilled water in tropical greenhouse. Masters thesis, Universiti Putra Malaysia.

Hussein, Ahmed Naser (2011) Content-based image retrieval system for plant leaf database using texture. Masters thesis, Universiti Putra Malaysia.

Islam, Md. Shafiqul (2011) New tunable all-fiber optical comb filter based on machzehnder interferometer. PhD thesis, Universiti Putra Malaysia.

Isuwa, Suleiman Aji (2011) Mechanical and thermal characterization of hybridized short kenaf/pineapple leaf fiber reinforced high density polyethylene composites. PhD thesis, Universiti Putra Malaysia.

Jaafar, Haryati (2011) Optimization of catadioptric location for a CCTV system in an indoor space. Masters thesis, Universiti Putra Malaysia.

Jahan, Ali (2011) Improving multi-criteria decision making algorithm for material selection. PhD thesis, Universiti Putra Malaysia.

Jahanbani, Heerbod (2011) Climate change and its impact on reference evapotranspiration at Rasht City, Iran. Masters thesis, Universiti Putra Malaysia.

Jalaluddin, Mai Nursherida (2011) Performance of front bumper and hood system with pedestrian safety subjected to frontal impacts. Masters thesis, Universiti Putra Malaysia.

Javan, Ali (2011) Detecting coordinated distributed attacks using mobile agents with associated managers architecture. Masters thesis, Universiti Putra Malaysia.

Javanmard, Marjan (2011) Rheological and textural characteristics of mango jam containing different gelling agents. Masters thesis, Universiti Putra Malaysia.

Jayaselan, Helena Anusia James (2011) Semi-automated robotic arm for oil palm fresh fruit bunch harvester. Masters thesis, Universiti Putra Malaysia.

Jusoh @ Taib, Emiliana Rose (2011) Effects of crude palm oil as plasticizer in polyoefin blown film. Masters thesis, Universiti Putra Malaysia.

Kalhor, Davood (2011) Vision-based human action recognition using time delay input radial basis function networks. Masters thesis, Universiti Putra Malaysia.

Karami, Mahdi (2011) Genetic algorithm based method for optimal location placement of flexible ac transmission system devices for voltage profile improvement. Masters thesis, Universiti Putra Malaysia.

Karimaldini, Fatemeh (2011) Reference evapotranspiration estimation using adaptive neuro-fuzzy inference system. Masters thesis, Universiti Putra Malaysia.

Karimi, Abbas (2011) Voting algorithms for large scale fault-tolerant systems. PhD thesis, Universiti Putra Malaysia.

Karuppiah, Karmegam (2011) Conceptual design, development and fabrication of a prototype ergonomic lumbar support for motorcyclists. PhD thesis, Universiti Putra Malaysia.

Kavandi, Nader (2011) Development of oil palm fresh fruit bunch maturity assessment software for personal digital assistant. Masters thesis, Universiti Putra Malaysia.

Kazemian, Sina (2011) Stabilization of peat by cement-sodium silicate grout using injection-vacuum technology. PhD thesis, Universiti Putra Malaysia.

Khiabani, Aydin (2011) Design of portable shell tube heat exchanger for solar powered water distiller. Masters thesis, Universiti Putra Malaysia.

Kouchaknezhad, Mehran (2011) Causes of delay in the building construction industry in major cities of Iran. Masters thesis, Universiti Putra Malaysia.

Kusumohadi, Catur Setyawan (2011) Longitudinal aerodynamic characteristics of wau bulan wing-tail configuration with selected airfoil profile. PhD thesis, Universiti Putra Malaysia.

Lankan, Mahshid (2011) Nano-encapsulation of paracetamol in L-poly lactic acid using supercritical anti-solvent method. Masters thesis, Universiti Putra Malaysia.

Lim, Siong Hock (2011) Co-composting of oil palm mesocarp fiber and palm oil mill effluent anaerobic sludge. Masters thesis, Universiti Putra Malaysia.

Lutfy, Omar F. (2011) Design of intelligent control system and its application on fabricated conveyor belt grain dryer. PhD thesis, Universiti Putra Malaysia.

Mansor, Hasmah (2011) Control of grain drying process using self-tuning quantitative feedback theory. Masters thesis, Universiti Putra Malaysia.

Mansouri, Solmaz Rastegar Moghaddam (2011) Design of segmented 14-bit low power current steering digital to analog converter. Masters thesis, Universiti Putra Malaysia.

Maringgal, Bernard (2011) Preparation of unidirectional polypropylene reinforced kenaf composite using mechanical impregnation method. Masters thesis, Universiti Putra Malaysia.

Masdi, Hendri (2011) Development of D-STATCOM for voltage SAG mitigation. PhD thesis, Universiti Putra Malaysia.

Masood, Hassan (2011) Synthesis, characterization, and application of calcium methoxide as heterogeneous catalyst for trimethylolpropane ester conversion reaction. Masters thesis, Universiti Putra Malaysia.

Mazalan, Siti Khodijah (2011) Multi-type interior permanent magnet motor driving system. Masters thesis, Universiti Putra Malaysia.

Md Yusof, Mohd Rozni (2011) Improved wavelet denoising of hyperspectral reflectance using level-independent wavelet thresholding. PhD thesis, Universiti Putra Malaysia.

Mehrjou, Mohammad Rezazadeh (2011) Motor current signature analysis of incipient broken rotor bar of squirrel cage induction motor. Masters thesis, Universiti Putra Malaysia.

Mirzaei, Maryam (2011) Fault diagnosis in unbalanced radial distribution networks using generalised regression neural network. Masters thesis, Universiti Putra Malaysia.

Mohamad, Nurul Lina (2011) Production of xylitol from sago trunk hydrolysate using Candida tropicalis. Masters thesis, Universiti Putra Malaysia.

Mohamad Shukery, Mohamad Firdza (2011) Development of a self-propelled compost turning machine for composting oil palm empty fruit bunches. Masters thesis, Universiti Putra Malaysia.

Mohamed, Zulfaisal (2011) Finite element modelling on corrosion defects to determine the residual strength of offshore pipelines. Masters thesis, Universiti Putra Malaysia.

Mohamed Amin Tawakkal, Intan Syafinaz (2011) Preparation of kenaf derived cellulose-filled polylactic acid composites. Masters thesis, Universiti Putra Malaysia.

Mohammad, Khairul Azhar (2011) Experimental determination of creep fatigue life of 316L stainless steel pipe. Masters thesis, Universiti Putra Malaysia.

Mohammad Reza Pour, Omolbani (2011) Ant colony optimization and genetic algorithm models for suspended sediment discharge estimation for gorgan-river, Iran. PhD thesis, Universiti Putra Malaysia.

Mohd Ariffen, Amizah (2011) Development of class 2 and class 3 surge protection devices for low voltage systems. Masters thesis, Universiti Putra Malaysia.

Mohd Hazir, Mohd Hafiz (2011) Ripeness detection of oil palm fresh fruit bunches using fluorescence sensor. Masters thesis, Universiti Putra Malaysia.

Mohd Marjan, Jamilah (2011) Modelling of accidents on two-lane single carriageway roads in Malaysia. PhD thesis, Universiti Putra Malaysia.

Mohd Saiah, Helmey Ramdhaney (2011) Effects of non-isothermal single circular impinging jet on a quasi-adiabatic flat plate. Masters thesis, Universiti Putra Malaysia.

Mohd Suhadis, Nurulasikin (2011) Magnetic attitude control options for earth pointing small satellite. PhD thesis, Universiti Putra Malaysia.

Mohd Yusoff, Nurul Izzah (2011) Characterization and analysis of ultra wideband signal absorption rates in breast tissues. Masters thesis, Universiti Putra Malaysia.

Mokhtar, Nur Mustika (2011) Microwave pyrolysis of oily sludge for potential synthesis gas (syngas) production. Masters thesis, Universiti Putra Malaysia.

Mokhtari, Ahmad (2011) Drought-events and potential impacts on land use/land cover dynamics based on AVHRR data of 1992-2003 for central Iran. Doctoral thesis, Universiti Putra Malaysia.

Mostafa, Ali Mohamed Benzaghta (2011) Evaporation reduction and prediction model for reservoirs. PhD thesis, Universiti Putra Malaysia.

Mousavi, Maryam (2011) Development of virtual reality framework in Malaysian automotive manufacturing industry. Masters thesis, Universiti Putra Malaysia.

Mtair, Ali Saadon (2011) New method for reduction of harmonic of three phase rectifier using harmonic injection method. Masters thesis, Universiti Putra Malaysia.

Muhamad Nasir, Ismail (2011) Anaerobic digestion of cattle manure with palm oil mill effluent as inoculum for biogas production. Masters thesis, Universiti Putra Malaysia.

Muhammad, (2011) Adsorption of β-carotene onto mesoporous carbon coated monolith. PhD thesis, Universiti Putra Malaysia.

Muhammad Syam, Azhari (2011) Continuous production of Jatropha curcas L. biodiesel using oscillatory flow biodiesel reactor. PhD thesis, Universiti Putra Malaysia.

Muhieldeen, Mohammed W. (2011) Polyethylene single bubble insulation capability in reducing cooling load of a lecture hall. Masters thesis, Universiti Putra Malaysia.

Munawar, Aris (2011) Foreign object debris detection based on continuous wave forward scattering radar doppler effect. Masters thesis, Universiti Putra Malaysia.

Muslim, Suci Rahmatia (2011) Parametric analysis and design of compact omnidirectional and directional ultra-wideband antenna. Masters thesis, Universiti Putra Malaysia.

Naidir, Ferra (2011) Synthesis of palm oil-based epoxidized trimethylolpropane esters as oxidatively stable lubricant. PhD thesis, Universiti Putra Malaysia.

Najafabadipour, Tooraj (2011) Evaluation of operating performance and level of service of urban public transport in Kerman, Iran. Masters thesis, Universiti Putra Malaysia.

Naserkhaki, Sadegh (2011) Pounding between adjacent buildings in consideration of soil structure interaction. Masters thesis, Universiti Putra Malaysia.

Nazemi, Allahiar (2011) Flow hydraulics and sediment transport in pervious rockfill detention dams. PhD thesis, Universiti Putra Malaysia.

Ng, Wei Sim (2011) Finite element analysis of cohesive element for glass epoxy composite fuselage model. Masters thesis, Universiti Putra Malaysia.

Nouri, Hossein (2011) Development of cell formation algorithm and model for cellular manufacturing system. PhD thesis, Universiti Putra Malaysia.

Oh, Yun Ju (2011) Development of a low cost, microwave-type rice yield monitor with wireless data communication for rice combine harvester. Masters thesis, Universiti Putra Malaysia.

Ooi, Chien Wei (2011) Recovery of extracellular lipase from burkholderia sp. st8 in aqueous two-phase systems. PhD thesis, Universiti Putra Malaysia.

Othman, Mohamad Lutfi (2011) Discovering decision algorithm of distance protective relay based on rough set theory and rule quality measure. PhD thesis, Universiti Putra Malaysia.

Othman, Siti Hajar (2011) Characterization and dispersion behavior of titanium dioxide as photocatalytic nanoparticles using metal organic chemical vapour deposition system. PhD thesis, Universiti Putra Malaysia.

Pang, Jia Hong (2011) Design of radix-4 single path delay fast fourier transform processor with genetic algorithms optimization. Masters thesis, Universiti Putra Malaysia.

Piltan, Farzin (2011) Methodology of fuzzy-based tuning for sliding mode controller. Masters thesis, Universiti Putra Malaysia.

Pour, Somayeh Rahimi (2011) Investigation and statistical simulation of variation aware 14nm SRAM cache memory architecture. Masters thesis, Universiti Putra Malaysia.

Pourzolfaghar, Zohreh (2011) Improving knowledge capture during conceptual design phase of building projects. PhD thesis, Universiti Putra Malaysia.

Pua, Ming Yee (2011) Design and development of a pineapple roll tart making machine. Masters thesis, Universiti Putra Malaysia.

Radkeya, Sirous (2011) Development of crack meander protocol for fatigue resistance in stone mastic asphalt mixture using cellulose fibers. PhD thesis, Universiti Putra Malaysia.

Rafeeu, Yaaseen (2011) Thermal performance of parabolic concentrators under Malaysian conditions. Masters thesis, Universiti Putra Malaysia.

Roodi, Siamak Moslehi (2011) A single chassis integrated machine system for transplanting oil palm seedlings. Masters thesis, Universiti Putra Malaysia.

Rusli, Julie Roslita (2011) Development of automated neighborhood pattern sensitive faults syndrome generator for static random access memory. Masters thesis, Universiti Putra Malaysia.

Safiee, Nor Azizi (2011) Structural behavior of interlocking mortarless putra block wall system. PhD thesis, Universiti Putra Malaysia.

Salem, Ramzia (2011) Multi-wavelength brillouin-erbium fiber laser utilizing bismuth-oxide erbium doped fiber incorporating high and low nonlinear fibers. PhD thesis, Universiti Putra Malaysia.

Salleh, Shanti Faridah (2011) Hydrolysis of oil palm empty fruit bunch using dilute acid. PhD thesis, Universiti Putra Malaysia.

Samijayani, Oktarina Nur (2011) Simulation of microwave bistatic radar for breast cancer detection application. Masters thesis, Universiti Putra Malaysia.

Shahraki, Mohammad Reza (2011) Economic production quantity model based on extended cost parameters for imperfect process and defective items. PhD thesis, Universiti Putra Malaysia.

Shahrjerdi, Ali (2011) Second order shear deformation theory for response analysis on temperature-dependent functionally graded plates due to vibration and mechanical loading. PhD thesis, Universiti Putra Malaysia.

Shamsabadi, Hosseinali Tash (2011) Effects of different tillage systems and planting densities on soil physical properties and yield components of sweet corn (Zea mays L.). PhD thesis, Universiti Putra Malaysia.

Shee, Yu Gang (2011) All-optical generation of millmeterwave carrier based on stimulated brillouin scattering. PhD thesis, Universiti Putra Malaysia.

Siregar, Januar Parlaungan (2011) Effects of selected treatments on properties of pineapple leaf fibre reinforced high impact polystyrene composites. PhD thesis, Universiti Putra Malaysia.

Siyal, Abdul Ghafoor (2011) Improving leaching efficiency of saline soils using water management techniques. PhD thesis, Universiti Putra Malaysia.

Suhail, Adeel H. (2011) In-process surface roughness monitoring based on workpiece surface temperature for turning operations. PhD thesis, Universiti Putra Malaysia.

Sulaiman, Suraya (2011) Simulation and characterization of aluminium-based metal matrix composite. Masters thesis, Universiti Putra Malaysia.

Syahrial, Erialdi (2011) Development of service tool failure mode and effect analysis (STFMEA) module for automotive service centers. Masters thesis, Universiti Putra Malaysia.

Tabbakh Farizani, Seyed Reza Kamel (2011) Design and development of dynamic queue storage and floating IP active measurement in IP networks. PhD thesis, Universiti Putra Malaysia.

Tan, Lee Woun (2011) Empirical modeling, simulation and control of spray drying process using nozzle atomizer spray dryer. Masters thesis, Universiti Putra Malaysia.

Tan, Mei Ching (2011) Ultrasound-aided mixing of sponge cake batter. Masters thesis, Universiti Putra Malaysia.

Tee, Lee Hong (2011) Rheological properties and optimal spray drying process parameters of Piper betle L. (betel) leaf extracts coated with different excipients. Masters thesis, Universiti Putra Malaysia.

Teng, Li Yuen (2011) Textural and rheological characterisations of sago starch and sago starch sugar gels. Masters thesis, Universiti Putra Malaysia.

Wan Hussin, Wan Mohamad Haniffah (2011) Effects of repeated water and domestic bleach immersion on kenaf fibre-reinforced polyropylene composites. Masters thesis, Universiti Putra Malaysia.

Wirawan, Riza (2011) Thermo-mechanical properties of sugarcane bagasse-filled polyvinyl chloride composites. PhD thesis, Universiti Putra Malaysia.

Yeoh, Sing Hsia (2011) Design of artificial intelligence-based electronic Malay language learning tool for visually impaired children. Masters thesis, Universiti Putra Malaysia.

Zaeri, Amirhossein (2011) Improving sliding mode control by using model predictive, fuzzy logic, and integral augmented techniques for aerial vehicle model. PhD thesis, Universiti Putra Malaysia.

Zainal Abidin, Zafirah (2011) Compressibility characteristics of Eucheuma cottonii L. powder prepared using microcrystalline cellulose and kappa-carageenan as binders. Masters thesis, Universiti Putra Malaysia.

Zaroog, Omar Suliman (2011) Residual stress relaxation of shot-peened 2024-T351 aluminium alloy. PhD thesis, Universiti Putra Malaysia.

UPM News

Universiti Putra Malaysia, Bahagian Komunikasi Korporat (2011) UPM hasil pengganti garam natrium rendah untuk pesakit jantung, diabetis dan darah tinggi. [UPM News]

This list was generated on Fri Apr 19 20:38:53 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0