Items where Division is "Faculty of Engineering" and Year is 2021

Group by: Creators | Item Type | No Grouping

Jump to: Article | Book Section | Conference or Workshop Item | Thesis

Number of items: 578.

Article

Fadhliani and Zulkafli, Zed Diyana and Yusuf, Badronnisa and Abu Bakar, Siti Nurhidayu (2021) Assessment of streamflow simulation for a tropical forested catchment using dynamic TOPMODEL—Dynamic fluxEs and ConnectIvity for Predictions of HydRology (DECIPHeR) framework and Generalized Likelihood Uncertainty Estimation (GLUE). Water, 13 (3). art. no. 317. pp. 1-16. ISSN 2073-4441

A Rashid, N. A. H. and Shamsudin, R. and Arifin, S. H. and Z Abdullah, W. N. Z. (2021) Morphological and quality characteristics of genus of Canarium L.: a review. IOP Conf. Series: Earth and Environmental Science, 733. art. no. 012015. pp. 1-11. ISSN 1755-1307; ESSN: 1755-1315

Abba, Mohammed Umar and Che Man, Hasfalina and Azis, Raba'ah Syahidah and Idris, Aida Isma and Hamzah, Muhammad Hazwan and Yunos, Khairul Faezah and Katibi, Kamil Kayode (2021) Novel PVDF-PVP hollow fiber membrane augmented with TiO2 nanoparticles: preparation, characterization and application for copper removal from leachate. Nanomaterials, 11 (2). art. no. 399. pp. 1-17. ISSN 2079-4991

Abba, Mohammed Umar and Che Man, Hasfalina and Azis, Raba’ah Syahidah and Idris, Aida Isma (2021) Synthesis of nano-magnetite from industrial mill chips for the application of boron removal: characterization and adsorption efficacy. International Journal of Environmental Research and Public Health, 18 (4). art. no. 1400. pp. 1-18. ISSN 1660-4601

Abd Halim, Nur Khairunnisa and Hussain, Siti Aslina and Abd. Razak, Mus’ab and Mohd Yunos, Mohd Amirul Syafiq (2021) CFD analysis of phase holdup behaviour in a gas-liquid bubble column. Journal of Applied Science & Process Engineering, 8 (1). 738 - 749. ISSN 2289-7771

Abd Rahman, Farah Asyikin and Ab Kadir, Mohd Zainal Abidin and Ungku Amirulddin Al Amin, Ungku Anisa and Osman, Miszaina (2021) Computation of energy absorption and residual voltage in a fourth rail LRT station arresters in EMTP-RV: a comparative study. Urban Rail Transit, 7. 71 - 83. ISSN 2199-6687; ESSN: 2199-6679

Abd Rahman, Farah Asyikin and Ab Kadir, Mohd Zainal Abidin and Ungku Amirulddin Al Amin, Ungku Anisa and Osman, Miszaina (2021) Electrical performance of polymer-insulated rail brackets of DC transit subjected to lightning induced overvoltage. Materials, 14 (7). pp. 1-17. ISSN 1996-1944

Abdul Aziz, Mohd Hamim and Bejo, Siti Khairunniza and Wayayok, Aimrun and Hashim, Fazirulhisyam and Kondo, Naoshi and Noor Azmi, Aiman Nabilah (2021) Temporal changes analysis of soil properties associated with Ganoderma boninense Pat. infection in oil palm seedlings in a controlled environment. Agronomy, 11 (11). art. no. 2279. pp. 1-14. ISSN 2073-4395

Abdul Halim, Noor Amirah and Zainal Abidin, Zurina and Siajam, Shamsul Izhar and Chong, Gun Hean and Harun, Mohd Razif (2021) Optimization studies and compositional analysis of subcritical water extraction of essential oil from Citrus hystrix DC. leaves. The Journal of Supercritical Fluids, 178. art. no. 105384. pp. 1-16. ISSN 0896-8446

Abdul Haris, Faranadia and Ab. Kadir, Mohd. Zainal Abidin and Sudin, Sukhairi and Johari, Dalina and Jasni, Jasronita and Mohammad Noor, Siti Zaliha (2021) Automated negative lightning return strokes classification system. Journal of Physics: Conference Series, 2107. art. no. 012022. pp. 1-8. ISSN 1742-6588; ESSN: 1742-6596

Abdul Latiff, Norliza and Pei, Ying Ong and Abd Rashid, Siti Nor Azlina and Abdullah, Luqman Chuah and Mohd Amin, Nor Amaiza and Mohd Fauzi, Noor Akhmazillah (2021) Enhancing recovery of bioactive compounds from Cosmos caudatus leaves via ultrasonic extraction. Scientific Reports, 11 (1). art. no. 17297. pp. 1-12. ISSN 2045-2322

Abdul Malek, Muhamad Aziman and Muhammad Rashid, Raizal Saifulnaz and Shukri, Ahmad Azim and El-Zeadani, Mohamed (2021) Experimental study of impact loading effect on bridge substructures including piles. Structures, 31. 419 - 427. ISSN 2352-0124

Abdul Manap, Mohd Yazid and Yusof, Yus Aniza (2021) Emerging trends in sustainable food processing industry. IOP Conference Series: Earth and Environmental Science, 757. art. no. 012076. pp. 1-11. ISSN 1755-1315

Abdul Rahman, Kawthar and Ahmad, Siti Anom and Che Soh, Azura and Ashari, Asmidawati and Wada, Chikamune and Gopalai, Alpha Agape (2021) The asociation of falls with instability: an analysis of perception and expectation towards the use of fall detection devices among older adults in Malaysia. Frontiers in Public Health, 9. pp. 1-11. ISSN 2296-2565

Abdul Rani, Nadia and Abdul Aziz, Faieza and Hemdi, Abdul Rahman and Kanagaraj, Mohanadhas (2021) Effects of machining method and technique on galvanized steel material properties. Journal of Computational Methods in Sciences and Engineering, 21 (3). 545 - 553. ISSN 1472-7978

Abdulhameed, Abdullah and Abd Wahab, Nur Zuraihan and Mohtar, Mohd Nazim and Hamidon, Mohd Nizar and Shafie, Suhaidi and Abdul Halin, Izhal (2021) Methods and applications of electrical conductivity enhancement of materials using carbon nanotubes. Journal of Electronic Materials, 50 (6). pp. 3207-3221. ISSN 0361-5235

Abdulhameed, Abdullah and Mohtar, Mohd Nazim and Hamidon, Mohd Nizar and Abdul Halin, Izhal (2021) Mild nitric acid treatments to improve multiwalled carbon nanotubes dispersity and solubility in dielectrophoresis mediums. Fullerenes, Nanotubes and Carbon Nanostructures, 29 (10). 832 - 839. ISSN 1536-383X; ESSN: 1536-4046

Abdulhameed, Abdullah and Mohtar, Mohd Nazim and Hamidon, Mohd Nizar and Mansor, Ishak and Abdul Halin, Izhal (2021) Characterization and selective deposition of carbon nanotubes from carbon nanoparticles mixture using mild acid treatment and electrokinetic manipulation. Materials Research Express, 8 (5). pp. 1-12. ISSN 2053-1591

Abdulkadir, Tukur Daiyabu and Wayayok, Aimrun and Mahadi @ Othman, Muhammad Razif and Mohd Kassim, Muhamad Saufi (2021) Analytical comparison between the speed of screw and crank-rocker basedpick and place mechanisms for seedling tray seeding machine. Basrah Journal of Agricultural Sciences, 34 (spec.1). 108 - 118. ISSN 1814-5868; ESSN: 2520-0860

Abdullahi, Salisu and Abdullah, Ahmad Fikri and Wayayok, Aimrun and Kamal, Md. Rowshon (2021) Characterization of clay soil and zolite powder as materials for the production of irrigation porous pipes. Basrah Journal of Agricultural Sciences, 34 (spec.1). 100 - 107. ISSN 1814-5868; ESSN: 2520-0860

Abral, Hairul and Chairani, Melati Krista and Rizki, Muhammad Dinul and Mahardika, Melbi and Handayani, Dian and Sugiarti, Eni and Muslimin, Ahmad Novi and Salit, Mohd Sapuan and Ilyas, R. A. (2021) Characterization of compressed bacterial cellulose nanopaper film after exposure to dry and humid conditions. Journal of Materials Research and Technology-JMR&T, 11. 896 - 904. ISSN 2238-7854; ESSN: 2214-0697

Abral, Hairul and Pratama, Angga Bahri and Handayani, Dian and Mahardika, Melbi and Aminah, Ibtisamatul and Sandrawati, Neny and Sugiarti, Eni and Muslimin, Ahmad Novi and Salit, Mohd Sapuan and R.A., Ilyas (2021) Antimicrobial edible film prepared from bacterial cellulose nanofibers/starch/chitosan for a food packaging alternative. International Journal of Polymer Science, 2021. pp. 1-11. ISSN 1687-9422; ESSN: 1687-9430

Abu Bakar, Noor Fitrah and Hussain, Mohamed Hasaan and Ismail, Ilyani and Othman, Nurhidayati and Huey, Ling Tan and Mohd Zain, Zainiharyati and Naim, Mohd Nazli and Radacsi, Norbert (2021) Electrospun polyetherimide-graphene oxide nanofiber electrodes for enhanced conductivity. Journal of Fiber Science and Technology, 77 (4). 136 - 145. ISSN 0037-9875; ESSN: 2189-7654

Abu Hassan Shaari, Helyati and Ramli, Muhammad Mahyiddin and Mohtar, Mohd Nazim and Abdul Rahman, Norizah and Ahmad, Azizan (2021) Synthesis and conductivity studies of poly (Methyl methacrylate) (PMMA) by co-polymerization and blending with polyaniline (PANi). Polymers, 13 (12). art. no. 1939. pp. 1-27. ISSN 2073-4360

Abu Talib, Abd. Rahim and Hilo, Ali Kareem (2021) Fluid flow and heat transfer over corrugated backward facing step channe. Case Studies in Thermal Engineering, 24. art. no. 100862. pp. 1-29. ISSN 2214-157X

Abulifa, A. A. and Che Soh, A. and Hassan, M. K. and Raja Ahamd, R. M. K. and MohdRadzi, M. A. (2021) Mathematical modelling and simulation of battery electric vehicle based on backward-facing approach technique. Turkish Journal of Computer and Mathematics Education, 12 (14). 5032 - 5041. ISSN 1309-4653

Adedayo, Ojo O. and Onibonoje, Moses and Isa, Maryam (2021) A layer-sensitivity based artificial neural network for characterization of oil palm fruitlets. International Journal of Applied Science and Engineering, 18 (1). pp. 1-7. ISSN 1727-2394; ESSN: 1727-7841

Ahmad, Mohd Najib and Mohamed Shariff, Abdul Rashid and Aris, Ishak and Abdul Halin, Izhal (2021) A four stage image processing algorithm for detecting and counting of bagworm, Metisa plana Walker (Lepidoptera: Psychidae). Agriculture-Basel, 11 (12). art. no. 1265. pp. 1-18. ISSN 2077-0472

Ahmad, Nor Izzati and Ali, Zaipatimah and Ab. Kadir, Mohd Zainal Abidin and Osman, Miszaina and Zaini, Nur Hazirah and Roslan, Muhammad Hakirin (2021) Analysis of lightning-induced voltages effect with SPD placement for sustainable operation in hybrid solar PV-battery energy storage system. Sustainability, 13 (12). art. no. 6889. pp. 1-23. ISSN 2071-1050

Ahmad Al-Obaidi, Mohammed Mahmoud and Ishak, Nor Shafizah and Ali, Salmiaton and Arifin, Nor Anisa and Raja Shahruzzaman, Raja Mohamad Hafriz and Wan Abdul Karim Ghani, Wan Azlina and Yap, Taufiq Yun Hin and Shamsuddin, Abdul Halim (2021) H2-Rich and Tar-Free downstream gasification reaction of EFB by using the Malaysian dolomite as a secondary catalyst. Catalysts, 11 (4). pp. 1-10. ISSN 2073-4344

Ahmad Saffian, Harmaen and Yamaguchi, Masayuki and Ariffin, Hidayah and Abdan, Khalina and Kassim, Nur Kartinee and Lee, Seng Hua and Lee, Ching Hao and Shafi, Ayu Rafiqah and Alias, Aisyah Humairah (2021) Thermal, physical and mechanical properties of polybutylene succinate/kenaf core fibers composites reinforced with esterified lignin. Polymers, 13 (14). art. no. 2359. pp. 1-16. ISSN 2073-4360

Ahmad Sobri, Sharizal and Heinemann, Robert and Whitehead, David and Afizi Shuaib, Norshah and Abdul Hamid, Mohd Faisal and Mohamed, Mazlan and Wan Ismail, Wan Omar Ali Saifuddin and Teo, Pao Ter and Masri, Mohamad Najmi and Abu Bakar, Mohamad Bashree and Abd Rahim, Erween and Wan Saidin, Wan Ahmad Najmuddin (2021) Machining of carbon fibre reinforced polymer composites: a preliminary investigation of high power fibre laser. Sains Malaysiana, 50 (9). 2727 - 2741. ISSN 0126-6039; ESSN: 2735-0118

Ahmed, M. H. M. and Mohd Yusoff, N. and Che Abdullah, C. A. and Alresheedi, M. T. and Rosli, N. S. and Talib, Z. A. and Mahdi, M. A. (2021) Nanosized titanium dioxide saturable absorber for soliton mode-locked thulium-doped fiber laser. Results in Physics, 31. art. no. 104930. pp. 1-8. ISSN 2211-3797

Ahmed Amodu, Oluwatosin and Othman, Mohamed and Noordin, Nor Kamariah and Ahmad, Idawaty (2021) Outage minimization of energy harvesting-based relay-assisted random underlay cognitive radio networks with interference cancellation. IEEE Access, 9. 109432 - 109446. ISSN ESSN: 2169-3536

Ahmed Malik, Asher and Nasif, Mohammad Shakir and Mokhtar, Ainul Akmar and Mohd Tohir, Mohd Zahirasri (2021) Numerical investigation of the effect of weather conditions on the escalation and propagation of fire-induced domino effect. Process Safety Progress, 40 (4). pp. 296-308. ISSN 1066-8527; ESSN: 1547-5913

Al Jlibawi, Ali Hussein Humod and Othman, Mohammad Lutfi and Ishak, Aris and Moh Noor, Bahari S. and Al Huseiny, M. Sattar Sajitt (2021) Optimization of distribution control system in oil refinery by applying hybrid machine learning techniques. IEEE Access, 10. pp. 3890-3903. ISSN 2169-3536

Al-Alimi, A.w. and Mohd Yusoff, N. and Cholan, N.a. and Alresheedi, M.t. and Abas, A.f. and Talib, Z.a. and Mahdi, M.a. (2021) Q-switched fiber laser employing a passive polarization-maintaining thulium-doped fiber as a saturable absorber. Results in Physics, 33. art. no. 105167. pp. 1-8. ISSN 2211-3797

Al-Alimi, Abdulmoghni Ali Wazea and Cholan, Noran Azizan and Salam, Sameer and Mustapha Kamil, Yasmin and Mohamed Ahmed, Mahmoud Hazzaa and Mahdi, Mohd Adzir (2021) Brillouin-Raman fiber laser with switchable wavelength spacing based on Brillouin pump distribution. Results in Physics, 25. art. no. 104149. pp. 1-8. ISSN 2211-3797

Al-Humairi, S. F. I. and Alias, A. H. and Haron, N. A. and Hassim, S. and Mohd Jakarni, F. (2021) Sustainable pavement: a review on the usage of pavement as a mitigation strategy for UHI. IOP Conference Series: Materials Science and Engineering, 1075 (1). pp. 1-10. ISSN 1757-8981; ESSN: 1757-899X

Al-Qazzaz, Noor Kamal and Sabir, Mohannad K. and Mohd Ali, Sawal Hamid and Ahmad, Siti Anom and Grammer, Karl (2021) Complexity and entropy analysis to improve gender identification from emotional-based EEGs. Journal of Healthcare Engineering, 2021. pp. 1-17. ISSN 2040-2295; ESSN: 2040-2309

Al-Qazzaz, Noor Kamal and Sabir, Mohannad K. and Mohd Ali, Sawal Hamid and Ahmad, Siti Anom and Grammer, Karl (2021) Multichannel optimization with hybrid spectral- entropy markers for gender identification enhancement of emotional-based EEGs. IEEE Access, 9. 107059 - 107078. ISSN 2169-3536

AlJawadi, Rafea Abdulsattar Mohammed and Mat Nawi, Nazmi and Wan Ismail, Wan Ishak and Ahmad, Desa and Mohd Kassim, Muhamad Saufi (2021) A review of the in-field transporting machines currently used in oil palm plantations in Malaysia. Basrah Journal of Agricultural Sciences, 34 (spec.1). 119 - 137. ISSN 1814-5868; ESSN: 2520-0860

Aladdin, Mohd Farid and Abdul Jalil, Nawal Aswan and Ng, Yee Guan and Md Rezali, Khairil Anas (2021) Perturbation effect of noise on overall feeling of discomfort from vertical whole-body vibration in vibro-acoustic environment. International Journal of Industrial Ergonomics, 83. art. no. 103136. pp. 1-13. ISSN 0169-8141; ESSN: 1872-8219

Albogami, Saad M. and Mohd Ariffin, Mohd Khairol Anuar and Supeni, Eris Elianddy and Ahmad, Kamarul Arifin (2021) Development of a hybrid AHP and Dempster-Shafer theory of evidence for project risk assessment problem. Journal of Project Management, 7. pp. 77-94. ISSN 2371-8366; ESSN: 2371-8374

Alghrairi, Mokhalad Khaleel and Sulaiman, Nasri and Wan Hasan, Wan Zuha and Jaafar, Haslina and Mutashar, Saad (2021) Efficient wireless power transmission to remote the sensor in restenosis coronary artery. Indonesian Journal of Electrical Engineering and Computer Science, 25 (2). 771 - 779. ISSN 2502-4752

Ali, Basheer Husham and Sulaiman, Nasri and Al-Haddad, Syed Abdul Rahman and Atan, Rodziah and Mohd Hassan, Siti Lailatul and Alghrairi, Mokhalad Khaleel (2021) Identification of distributed denial of services anomalies by using combination of entropy and sequential probabilities ratio test methods. Sensors, 21 (19). pp. 1-17. ISSN 1424-8220

Alias, Aisyah Humaira and Mohd Nurazzi, Norizan and Sabaruddin, Fatimah Athiyah and Muhammad Rizal, Muhammad Asyraf and Mohd Nor Faiz, Norrrahim and Ilyas, Ahmad Rushdan and Kuzmin, Anton M. and Rayung, Marwah and Shazleen, Siti Shazra and Nazrin, Asmawi and Shah Faisal Khan, Sherwani and Moklis, Muhammad Harussani and Mahamud, Siti Nur Atikah and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Khalina, Abdan (2021) Hybridization of MMT/lignocellulosic fiber reinforced polymer nanocomposites for structural applications: a review. Coatings, 11 (11). pp. 1-42. ISSN 2079-6412

Alias, Nur Diyana and Puteh, Fadzilah and Mohd Zulkifli, Nurin Izzati and Noor Hasnan, Noor Zafira (2021) Evaluation of total phenolic content and antioxidant activities from different type of extraction technique of Helianthus tuberosus. Advances in Agricultural and Food Research Journal, 2 (1). pp. 1-12. ISSN 2736-1799

Aljermi, Almukhtar IB. A. and Sulaiman, S. and Mohamed Ariff, Azmah Hanim and Ismail, Mohd Idris Shah (2021) Effect of heat treatment on the corrosion behaviour of LM6 in sulphuric acid and sodium hydroxide. International Research Journal of Engineering and Technology, 8 (8). 982 - 989. ISSN 2395-0072; ESSN: 2395-0056

Almansi, Khaled Yousef and Mohamed Shariff, Abdul Rashid and Abdullah, Ahmad Fikri and Syed Ismail, Sharifah Norkhadijah (2021) Hospital site suitability assessment using three machine learning approaches: evidence from the Gaza strip in Palestine. Applied Sciences-Basel, 11 (22). pp. 1-22. ISSN 2076-3417

Almutairi, Abdullah Dhaifallah and Abu Hassan, Hasyma and Suppiah, Subapriya and Alomair, Othman I. and Almotairy, Abdulrahim and Muslim, Ali M. and Almanaa, Abdullah and Mahmud, Rozi (2021) Diagnostic accuracy and correlation between Double Inversion Recovery (DIR), FLAIR and T2W imaging sequences with EDSS in detection of lesions at different anatomical regions in MS patients. NeuroQuantology, 19 (1). pp. 1-10. ISSN 1303-5150

Alrubaye, Yasir Layth and Yusuf, Badronnisa (2021) Former and current trend in subsurface irrigation systems. Pertanika Journal of Science & Technology, 29 (1). pp. 1-30. ISSN 0128-7680; ESSN: 2231-8526

Alsabah, Muntadher and Abdulrazzaq Naser, Marwah and Mahmmod, Basheera M. and Noordin, Nor K. and Abdulhussain, Sadiq H. (2021) Sum rate maximization versus MSE minimization in FDD massive MIMO systems with short coherence time. IEEE Access, 9. pp. 1-16. ISSN 2169-3536

Alsabari, Ali Mohsen and Hassan, Mohd Khair and Che Soh, Azura and Abdul Rahman, Ribhan Zafira (2021) Experimental design for an enhanced parametric modeling of supercapacitor equivalent circuit model. Indonesian Journal of Electrical Engineering and Computer Science, 23 (1). 63 - 74. ISSN 2502-4752; ESSN: 2502-4760

Alsultan, Abdulkareem G. and Mijan, Nurul Asikin and Ibrahim, Zueriani and Yunus, Robiah and Razali, Siti Zulaika and Mansir, Nasar and Islam, Aminul and Seenivasagam, Sivasangar and Yap, Taufiq Yun Hin (2021) A short review on catalyst, feedstock, modernised process, current state and challenges on biodiesel production. Catalysts, 11 (11). art. no. 1261. pp. 1-38. ISSN 2073-4344

Althuwayb, Ayman Abdulhadi and Hashim, Fazirulhisyam and Liew, Jiun Terng and Khan, Imran and Jeong, Woo Lee and Affum, Emmanuel Ampoma and Ouahabi, Abdeldjalil and Jacques, Sébastien (2021) A highly efficient algorithm for phased-array mmWave massive MIMO beamforming. Computers, Materials and Continua, 69 (1). 679 - 694. ISSN 1546-2218; ESSN; 1546-2226

Altogbia, Warda Mohamed Ali and Yusof, Nor Azah and Zainal, Zulkarnain and Idris, Azni and Ab. Rahman, Siti Khadijah and Abd Rahman, Siti Fatimah and Isha, Azizul (2021) Molecular imprinted polymer for β-carotene for application in palm oil mill effluent treatment. Arabian Journal of Chemistry, 14 (2). art. no. 102928. pp. 1-23. ISSN 1878-5352

Altohami, Abubaker Basheer Abdalwhab and Haron, Nuzul Azam and Ales@Alias, Aidi Hizami and Law, Teik Hua (2021) Investigating approaches of integrating BIM, IoT, and facility management for renovating existing buildings: a review. Sustainability, 13 (x). art. no. 3930. pp. 1-37. ISSN 2071-1050

Amir, Siti Hajar and Mohd Yusof, Mohd Hafis Yuswan and Wan Mohd Aizat and Mansor, Muhammad Kamaruzaman and Mohd Desa, Mohd Nasir and Yusof, Yus Aniza and Lai, Kok Song and Mustafa, Shuhaimi (2021) Comparative database search engine analysis on massive tandem mass spectra of pork-based food products for halal proteomics. Journal of Proteomics, 241. art. no. 104240. pp. 1-7. ISSN 1874-3919

Amir Tan, Adhwa and Mohd Shafri, Helmi Zulhaidi and Shaharum, Nur Shafira Nisa (2021) Performance of Sentinel-2A remote sensing system for urban area mapping in Malaysia via pixel-based and OBIA methods. Trends in Sciences, 18 (21). pp. 1-15. ISSN 2774-0226

Amri, Mohamad Ridzuan and Chuah, Teong Guan and Al-Edrus, Syeed Saifulazry Osman and Md Yasin, Faizah and Mohamad, Siti Fatahiyah (2021) Effect of cellulose nanofibrils on the properties of Jatropha oil-based waterborne polyurethane nanocomposite film. Polymers, 13 (9). pp. 1-14. ISSN 2073-4360

Amri, Mohamad Ridzuan and Md Yasin, Faizah and Abddulah, Luqman Chuah and Osman Al-Edrus, Syeed SaifulAzry and Mohamad, Siti Fatahiyah (2021) Ternary nanocomposite system composing of graphene nanoplatelet, cellulose nanofiber and jatropha oil based waterborne polyurethane: characterizations, mechanical, thermal properties and conductivity. Polymers, 13 (21). pp. 1-17. ISSN 2073-4360

Ansari, Anwaar Hazoor and Mohd Jakarni, Fauzan and Muniandy, Ratnasamy and Hassim, Salihudin (2021) A review on the application of natural rubber as asphalt modifier. IOP Conference Series: Materials Science and Engineering, 1075. art. no. 012031. pp. 1-12. ISSN 1757-899X

Ansari, Anwaar Hazoor and Mohd Jakarni, Fauzan and Muniandy, Ratnasamy and Hassim, Salihudin and Elahi, Zafreen (2021) Natural rubber as a renewable and sustainable bio-modifier for pavement applications: a review. Journal of Cleaner Production, 289. art. no. 125727. pp. 1-16. ISSN 0959-6526

Anugerah, Adhe Rizky and Ahmad, Siti Azfanizam and Samin, Razali and Samdin, Zaiton and Kamaruddin, Norfaryanti (2021) Modified failure mode and effect analysis to mitigate sustainable related risk in the palm oil supply chain. Advances in Materials and Processing Technologies, 8 (2). pp. 2229-2243. ISSN 2374-068X; ESSN: 2374-0698

Anwar, Murniwati and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Abdul Halin, Izhal and Abdullah, Mohd Na'im and Hassim, Mohamad Iswady and Mustapha, Mazli (2021) Damage identification on impact and lightning damage of flax composite laminates (Linum usitatissimum) using long-pulse thermography of a low-resolution infrared camera. Frontiers in Materials, 8. pp. 1-16. ISSN 2296-8016

Aralbayev, Nurbek and Dikhanbayeva, Fatima and Yusof, Yus Aniza and Tayeva, Aigul and Smailova, Zhuldyz (2021) Devising optimal technological parameters for spray drying to produce whole camel milk powder. Eastern-European Journal of Enterprise Technologies, 4 (11). art. no. 112. 82 - 91. ISSN 1729-3774; ESSN: 1729-4061

Arefin, Ahmed Amirul and Md. Hasan, Khairul Nisak and Othman, Mohammad Lutfi and Romlie, Mohd Fakhizan and Saad, Nordin and Mohd Nor, Nursyarizal and Abdullah, Mohd Faris (2021) A novel island detection threshold setting using phasor measurement unit voltage angle in a distribution network. Energies, 14 (16). art. no. 4877. pp. 1-14. ISSN 1996-1073

Aridi, Aida Safina and Chin, Nyuk Ling and Ishak, Nur Akmal and Mohamad Yusof, Nor Nadiah and Kadota, Kazunori and Abdul Manaf, Noorzianna and Yusof, Yus Aniza (2021) Effect of Sodium Hypochlorite Concentration during Pre-treatment on Isolation of Nanocrystalline Cellulose from Leucaena leucocephala Lam. Mature Pods. BioResources, 16 (2). 3137 - 3158. ISSN 1930-2126

Arumugam, Veknesh and Abdullah, Ismail and Md Yusoff, Irwan Syah and Abdullah, Nor Liza and Mohd Tahir, Ramli and Mohd Nasir, Ahadi and Omar, Ammar Ehsan and Ismail, Muhammad Heikal (2021) The impact of COVID-19 on solid waste generation in the perspectives of socioeconomic and people's behavior: a case study in Serdang, Malaysia. Sustainability, 13 (23). art. no. 13045. pp. 1-11. ISSN 2071-1050

Arumugam, Veknesh and Ismail, Muhammad Heikal and Asih, Ngadisih and Irie, Mami and Omar, Rozita (2021) Synthesizing green Chitosan-magnetic composite particles for palm oil mill effluent (POME) pre-treatment: a comprehensive review. Materials Today, 46 (4). 1680 - 1683. ISSN 2214-7853

Asghar, Muhammad Tuseef and Yusof, Yus Aniza and Mokhtar, Mohd Noriznan and Yaacob, Mohammad Effendy and Mohd Ghazali, Hasanah and Lee, Sin Chang (2021) A review of nutritional facts, production, availability and future aspects of coconut palm sugar. Journal of Nutrition and Food Sciences, 11 (3). pp. 1-8. ISSN 2155-9600

Ashraf, Waqas and Ishak, Mohamad Ridzwan and Mohamed Yusoff, Mohd Zuhri and Yidris, Noorfaizal and Ya'acob, Abdul Malek (2021) Effect on mechanical properties by partial replacement of the glass with alkali-treated flax fiber in composite facesheet of sandwich structure. Journal of Materials Research and Technology-JMR&T, 13. 89 - 98. ISSN 2238-7854; ESSN: 2214-0697

Ashraf, Waqas and Ishak, Mohamad Ridzwan and Mohamed Yusoff, Mohd Zuhri and Yidris, Noorfaizal and Ya'acob, Abdul Malek (2021) Experimental Investigation on the mechanical properties of a sandwich structure made of flax/glass hybrid composites facesheet and honeycomb core. International Journal of Polymer Science, 2021. art. no. 8855952. pp. 1-10. ISSN 1687-9422; ESSN: 1687-9430

Ashrafi, Negin and Mohamed Ariff, Azmah Hanim and Sarraf, Masoud and Sulaiman, Shamsuddin and Tang, Sai Hong (2021) Microstructural, thermal, electrical, and magnetic properties of optimized Fe3O4–SiC hybrid nano filler reinforced aluminium matrix composite. Materials Chemistry and Physics, 258. art. no. 123895. pp. 1-14. ISSN 0254-0584

Askar, Mohammad Tolou and Mohammadi, Mohammad Javad and Pasupuleti, Jagadeesh and Tahmasebi, Mehrdad and Raveendran, Shangari K. and Ab Kadir, Mohd Zainal Abidin (2021) Analysis of thermal models to determine the loss of life of mineral oil immersed transformers. Bulletin of Electrical Engineering and Informatics, 10 (5). 2327 - 2336. ISSN 2302-9285

Asman, Saidatul Habsah and Ab Aziz, Nur Fadilah and Ungku Amirulddin Al Amin, Ungku Anisa and Ab Kadir, Mohd Zainal Abidin (2021) Decision tree method for fault causes classification based on RMS-DWT analysis in 275 kV transmission lines network. Applied Sciences-Basel, 11. art. no. 9. pp. 1-26. ISSN 2076-3417

Asrofi, Mochamad and Salit, Mohd Sapuan and Ilyas, R. A. and M., Ramesh (2021) Characteristic of composite bioplastics from tapioca starch and sugarcane bagasse fiber: Effect of time duration of ultrasonication (Bath-Type). Materials Today Communications, 46 (pt. 4). 1626 - 1630. ISSN 2352-4928

Azhar Shapawi, Zahrah Izati and Ariffin, Siti Hajar and Shamsudin, Rosnah and Mohamed Amin Tawakkal, Intan Syafinaz and Gkatzionis, Konstantinos (2021) Modeling respiration rate of fresh-cut sweet potato (Anggun) stored in different packaging films. Food Packaging and Shelf Life, 28. art. no. 100657. pp. 1-10. ISSN 2214-2894

Azizkhani, Sepehr and Hussain, Siti Aslina and Abdullah, Norhafizah and Shah Ismail, Mohd Halim and Mohammad, Abdul Wahab (2021) Synthesis and application of functionalized Graphene oxide-silica with chitosan for removal of Cd II fromaqueous solution. Journal of Environmental Health Science and Engineering, 19 (1). 491 - 502. ISSN 2052-336X

Balan, Santhra Segaran and Maya, Sitell and Zainal Abidin, Azrina and Fuad, Muhammad and Othman, Fezah and Bahari, Hasnah (2021) Evaluation on the effectiveness of using 3D rat model for teaching blood withdrawal technique among undergraduate students. Universal Journal of Educational Research, 9 (1). pp. 10-16. ISSN 2332-3213

Basha, Roseliza Kadir and Leong, K. Y. and Othman, S. H. and Talib, R. A. and Naim, M. N. and Hasnan, N. Z. N. and Azmi, N. S. (2021) Sorption characteristic of starch-based film. Food Research, 5 (suppl.1). 193 - 200. ISSN 0095-974X; ESSN: 2550-2166

Basri, Adi Azriff and Zuber, Mohammad and Basri, Ernnie Illyani and Zakaria, Muhammad Shukri and Abd Aziz, Ahmad Fazli and Ahmad, Kamarul Arifin (2021) Fluid-structure interaction in problems of patient specific transcatheter aortic valve implantation with and without paravalvular leakage complication. Fluid Dynamics and Materials Processing, 17 (3). 531 - 553. ISSN 1555-256X; ESSN: 1555-2578

Basri, Ernnie Illyani and Hameed Sultan, Mohamed Thariq and Basri, Adi Azriff and Mustapha, Faizal (2021) Consideration of lamination structural analysis in a multi-layered composite and failure analysis on wing design application. Materials, 14 (13). art. no. 3705. pp. 1-10. ISSN 1996-1944

Bejo, Siti Khairunniza and Shahibullah, Muhamad Syahir and Noor Azmi, Aiman Nabilah and Jahari, Mahirah (2021) Non-destructive detection of asymptomatic Ganoderma boninense infection of oil palm seedlings using NIR-hyperspectral data and support vector machine. Applied Sciences, 11 (22). art. no. 10878. pp. 1-17. ISSN 2076-3417

Bobba, Sujith and Leman, Zulkiflle and Zainudin, Edi Syams and Salit, Mohd Sapuan (2021) Impact and internal pressure failure of E-glass and S-glass epoxy composite elbow pipe joints influenced by sea water. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235 (1). pp. 1-8. ISSN 0954-4089; ESSN: 2041-3009

Bobba, Sujith and Mukkollu, Sambasiva Rao and Leman, Z. and Bachina, Harish Babu (2021) Experimental investigation on the effect due to mould vibrations on mechanical and metallurgical properties of aluminum alloy (a-1050). International Journal of Surface Engineering and Interdisciplinary Materials Science, 9 (1). 77-86-86. ISSN 2166-7225,2166-7233

Budholiya, Sejal and Bhat, Aayush and Raj, S. Aravind and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Basri, Adi A. (2021) State of the art review about bio-inspired design and applications: an aerospace perspective. Applied Sciences, 11 (11). pp. 1-23. ISSN 2076-3417

Che Hasan, Mohd Hanif and Hassan, Mohd Khair and Ahmad, Fauzi and Marhaban, Mohammad Hamiruce and Haris, Sharil Izwan (2021) A dynamic model of electronic wedge brake: experimental, control and optimization. Indonesian Journal of Electrical Engineering and Computer Science, 23 (2). 740 - 751. ISSN 2502-4752; ESSN: 2502-4760

Che Hashim, Izrahayu and Mohamed Shariff, Abdul Rashid and Bejo, Siti Khairunniza and Muharam, Farrah Melissa and Ahmad, Khairulmazmi (2021) Classification of non-infected and infected with basal stem rot disease using thermal images and imbalanced data approach. Agronomy-Basel, 11 (12). art. no. 2373. pp. 1-23. ISSN 2073-4395; ESSN: 2073-4395

Che Man, Hasfalina and Idris, Mohd Shafiq and Rozelan, Nur Syamimi Najihah and Shamsudin, Rosnah (2021) Some physical and mechanical properties of pineapple leaves from different varieties. AMA-Agricultural Mechanization in Asia Africa and Latin America, 52 (3). 3999 - 4012. ISSN 0084-5841

Che Man, Hasfalina and Md Yunos, Khairul Faezah and K. K., Katibi and M. U., Abba (2021) Antifouling and permeability flux enhancement PVDF- PVP membrane using nano-titanium dioxide for Palm Oil Mill Effluent (POME) color removal. AMA-Agricultural Mechanization in Asia Africa and Latin America, 52 (3). 4149 - 4166. ISSN 0084-5841

Che Mohammad Ishkandar El-Rahimin, Che Dini Maryani and Mat Nawi, Nazmi and Janius, Rimfiel and Mazlan, Norida and Ta, Te Lin and Li, Ta Chen (2021) Classification of pesticide residues in cabbages based on spectral data. AMA-Agricultural Mechanization in Asia Africa and Latin America, 52 (3). pp. 4063-4074. ISSN 0084-5841

Chilabi, Haider Jaafar and Salleh, Hanim and Al-Ashtari, Waleed and Supeni, Eris Elianddy and Abdullah, Luqman Chuah and As’arry, Azizan and Md Rezali, Khairil Anas and Mohammad Khairul Azwan (2021) Rotational Piezoelectric Energy Harvesting: a comprehensive review on excitation elements, designs, and performances. Energies, 14 (11). art. no. 3098. pp. 1-29. ISSN 1996-1073

Chong, Kar Yeen and Chin, Nyuk Ling and Yusof, Yus Aniza and Fakurazi, Sharida (2021) Anti-inflammatory activity of raw and processed stingless bee honey. Food Research, 5 (suppl.1). 201 - 208. ISSN 2550-2166

Dayor Piersson, Albert and Ibrahim, Buhari and Suppiah, Subapriya and Mohamad, Mazlyfarina and Abu Hassan, Hasyma and Omar, Nur Farhayu and Ibrahim, Mohd Izuan and Yusoff, Ahmad Nazlim and Ibrahim, Normala and Saripan, M. Iqbal and Razali, Rizah Mazzuin (2021) Multiparametric MRI for the improved diagnostic accuracy of Alzheimer’s disease and mild cognitive impairment: research protocol of a case-control study design. PLoS One, 16 (9). art. no. e0252883. pp. 1-14. ISSN 1932-6203

Eissa, Magdy Abdullah and Sali, Aduwati and Ahmad, Faisul Arif and Darwish, Rania R. (2021) Observer-based fault detection approach using fuzzy adaptive poles placement system with real-time implementation. IEEE Access, 9. pp. 83272-83284. ISSN 2169-3536

El-Zeadani, Mohamed and Muhammad Rashid, Raizal Saifulnaz and Amran, Mugahed (2021) Full-range bondstress-slip model for externally bonded FRP plates including a frictional component. Composite Structures, 262. art. no. 113372. pp. 1-25. ISSN 0263-8223

Elahi, Zafreen and Mohd Jakarni, Fauzan and Muniandy, Ratnasamy and Hassim, Salihudin and Ab Razak, Mohd Shahrizal and Ansari, Anwaar Hazoor and Ben Zair, Mohamed Meftah (2021) Waste cooking oil as a sustainable bio modifier for asphalt modification: a review. Sustainability, 13 (20). Jan-27. ISSN 2071-1050

Elbidi, Moammar and Hewas, Agab and Asar, Rajab and Mohd Salleh, Mohamad Amran (2021) Comparative study between activated carbon and biochar for phenol removal from aqueous solution. BioResources, 16 (4). 6781 - 6790. ISSN 1930-2126

Emeka, Okoli Jude and Nahazanan, Haslinda and Kalantar, Bahareh and Khuzaimah, Zailani and Sani, Ojogbane Success (2021) Evaluation of the effect of hydroseeded vegetation for slope reinforcement. Land, 10 (10). pp. 1-26. ISSN 2073-445X

Esfahan, Z. M. and Izhar, S. and Ismail, M. H. S. and Yoshida, H. (2021) Subcritical water treatment of bovine serum albumin pathway to produce superabsorbent biomaterial as green technology. Materials Today Sustainability, 16. pp. 1-14. ISSN 2589-2347

Faisal Khan, Sherwani Shah and Salit, Mohd Sapuan and Leman, Zulkiflle and Zainudin, Edi Syams and Abdan, Khalina (2021) Effect of alkaline and benzoyl chloride treatments on the mechanical and morphological properties of sugar palm fiber-reinforced poly(lactic acid) composites. Textile Research Journal, 92 (3-4). pp. 1-33. ISSN 0040-5175; ESSN: 1746-7748

Farade, Rizwan A. and Abdul Wahab, Noor Izzri and Mansour, Diaa Eldin A. and Azis, Norhafiz and Jasni, Jasronita and Veerasamy, Veerapandiyan and Vinayagam, Arangarajan and Kotiyal, Bandanawaz M. and Yunus Khan, T. M. (2021) The effect of interfacial zone due to nanoparticle-surfactant interaction on dielectric properties of vegetable oil based nanofluids. IEEE Access, 9. pp. 1-13. ISSN 2169-3536

Fazlil Ilahi, Wan Fazilah and Abu Hassan, Nur Hidayu and Ismail, Mohd Razi and Che'ya, Nik Norasma and Berahim, Zulkarami and Omar, Mohamad Husni and Zakaria, Nurul Idayu and Mohamed Zawawi, Mohamed Azwan (2021) Potential groundwater exploration in use of 2-D Electrical Resistivity Tomography (ERT) techniques at the Department of Agriculture Kelantan Research and Developmental platform Padang Raja Kelantan. Pertanika Journal of Science & Technology, 29 (2). pp. 1219-1228. ISSN 0128-7680; ESSN: 2231-8526

Fazlil Ilahi, Wan Fazilah and Abu Hassan, Nur Hidayu and Ismail, Mohd Razi and Che'ya, Nik Norasma and Berahim, Zulkarami and Omar, Mohamad Husni and Zakaria, Nurul Idayu and Mohamed Zawawi, Mohamed Azwan (2021) Potential groundwater exploration in use of 2-D electrical resistivity tomography (ERT) techniques at the Department of Agriculture Kelantan Research and Developmental Platform Padang Raja Kelantan. Pertanika Journal of Science & Technology, 29 (2). pp. 1219-1228. ISSN 0128-7680; ESSN: 2231-8526

Fuad, Nurafifah and Omar, Rozita and Kamarudin, Suryani and Harun, Mohd Razif and Idris, Azni and Wan Abdul Karim Ghani, Wan Azlina (2021) Harvesting marine microalgae nannochloropsis sp. using Dissolved Air Flotation (DAF) technique. Sains Malaysiana, 50 (1). 73 - 83. ISSN 0126-6039

Ghafari, Mehdi and Nahazanan, Haslinda and Md Yusoff, Zainuddin and Ghiasi, Vahed (2021) The effect of soil cohesion and friction angles on reverse faults. Earthquake Engineering and Engineering Vibration, 20 (-). 329 - 334. ISSN 1671-3664; ESSN: 1993-503X

Gian, Caleb Michealangelo and Mohd Tohir, Mohd Zahirasri and Md Said, Mohamad Syazarudin and Tharima, Ahmad Faiz and Mohd Nizam Ong, Nur Aliah Fatin and Ramali, Mohd Rashid (2021) Effectiveness of travel time during evacuation in high-rise residential buildings: a case study in Selangor, Malaysia. International Journal of Emergency Services, 11 (1). pp. 114-132. ISSN 2047-0894; ESSN: 2047-0908

Goh, Jia Quan and Mohamed Shariff, Abdul Rashid and Mat Nawi, Nazmi (2021) Application of optical spectrometer to determine maturity level of oil palm fresh fruit bunches based on analysis of the Front Equatorial, Front Basil, Back Equatorial, Back Basil and apical parts of the oil palm bunches. Agriculture-Basel, 11 (12). art. no. 1179. pp. 1-20. ISSN 2077-0472

Gomez, Javier Chavarro and Zakaria, Rabitah and Min, Min Aung and Mokhtar, Mohd Noriznan and Yunus, Robiah (2021) Synthesis and characterization of polyurethanes from residual palm oil with high poly-unsaturated fatty acid oils as additive. Polymers, 13 (23). art. no. 4214. pp. 1-18. ISSN 2073-4360

Habibiasr, Mina and Mokhtar, Mohd Noriznan and Ibrahim, Mohd Nordin and Md Yunos, Khairul Faezah and Ibrahim, Nuzul Amri (2021) Effect of drying on the physical and chemical properties of palm kernel oil. Journal of the Science of Food and Agriculture, 102 (10). pp. 4046-4053. ISSN 1097-0010

Hadi, Mustafa Kareem and Mohd Kassim, Muhamad Saufi and Wayayok, Aimrun (2021) Development of an automated multidirectional pest sampling detection system using motorized sticky traps. IEEE Access, 9. 67391 - 67404. ISSN 2169-3536

Hajiyat, Zahraa Raad Mayoof and Ismail, Alyani and Sali, Aduwati and Hamidon, Mohd Nizar (2021) Antenna in 6G wireless communication system: specifications, challenges, and research directions. OPTIK, 231. art. no. 166415. pp. 1-14. ISSN 0030-4026

Hamdan, Nor Salwa and Salit, Mohd Sapuan and Mohammad Taha, Mastura and Mohamed Yusoff, Mohd Zuhri (2021) Conceptual design and selection of Natural Fibre Reinforced Biopolymer Composite (NFBC) takeout food container. Journal of Renewable Materials, 9 (4). 803 - 827. ISSN 2164-6325; ESSN: 2164-6341

Hamzah, Muhammad Hazwan and Bowra, Steve and Cox, Philip (2021) Organosolv lignin aggregation behaviour of soluble lignin extract from Miscanthus x giganteus at different ethanol concentrations and its influence on the lignin esterification. Chemical and Biological Technologies in Agriculture, 8. art. no. 65. pp. 1-13. ISSN ESSN: 2196-5641

Haridan, N. A. and Yoshida, Hiroyuki and Mohd Salleh, Mohamad Amran and Siajam, Shamsul Izhar (2021) Carbonization of excess sewage sludge using superheated water vapor to produce fuel. IOP Conference Series: Materials Science and Engineering, 991. art. no. 012068. pp. 1-6. ISSN 1757-899X

Haris, Nur Izzah Nabilah and Sobri, Shafreeza and Yusof, Yus Aniza and Kassim, Nur Kartinee (2021) An overview of molecular dynamic simulation for corrosion inhibition of ferrous metals. Metals, 11 (1). art. no. 46. pp. 1-22. ISSN 2075-4701

Harith, Hazreen Haizi and Mohd, Muhammad Fuad and Nai Sowat, Sharence (2021) A preliminary investigation on upper limb exoskeleton assistance for simulated agricultural tasks. Applied Ergonomics, 95. art. no. 103455. pp. 1-10. ISSN 0003-6870

Haron, Nor Azidawati and Yusuf, Badronnisa and Nurhidayu, Siti and Sulaiman, Mohd Sofiyan and Ab Razak, Mohd Shahrizal (2021) Features and geomorphic response of mountainous river by reach scale. Lecture Notes in Civil Engineering, 132. pp. 66-73. ISSN 2366-2557,2366-2565

Harrussani, M. M and Rashid, Umer and Sapuan, S. M. and Abdan, Khalina (2021) Low-temperature thermal degradation of disinfected COVID-19 non-woven polypropylene-based isolation gown wastes into carbonaceous char. Polymers, 13 (22). art. no. 3980. pp. 1-20. ISSN 2073-4360

Harun @ Ramli, Hafiz Rashidi and Ako, Emmanul and Saripan, M. Iqbal and Bello, Fernando (2021) A study of haptic effects in endovascular interventions. Mekatronika, 3 (1). pp. 10-17. ISSN 2637-0883

Harussani, M. M. and Sapuan, S. M. (2021) Development of kenaf biochar in engineering and agricultural applications. Chemistry Africa, 5. pp. 1-17. ISSN 2522-5758; ESSN: 2522-5766

Harussani, M.m. and Sapuan, S.m. and Rashid, Umer and Khalina, A. and Ilyas, R.A. (2021) Pyrolysis of polypropylene plastic waste into carbonaceous char: priority of plastic waste management amidst COVID-19 pandemic. Science of the Total Environment, 803. art. no. 149911. pp. 1-16. ISSN 0048-9697; ESSN: 1879-1026

Hashim, Mohd Khairul Rabani and Abdul Majid, Mohd Shukry and Mohd Jamir, Mohd Ridzuan and Kasim, Farizul Hafiz and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Ahmad, Kamarul Arifin and Basri, Adi Azriff (2021) The effect of stacking sequence on fatigue behaviour of hybrid pineapple leaf fibre/carbon-fibre-reinforced epoxy composites. Polymers, 13 (22). art. no. 3936. pp. 1-16. ISSN 2073-4360

Hasnul Hadi, Muhamad Haziq and Pin, Jern Ker and Hui, Jing Lee and Yang, Sing Leong and Mahammad A., Hannan and Jamaludin, Md. Zaini and Mahdi, Mohd Adzir (2021) Color index of transformer oil: a low-cost measurement approach using ultraviolet-blue laser. Sensors, 21 (21). pp. 1-12. ISSN 1424-8220

Hasnul Hadi, Muhamad Haziq and Pin, Jern Ker and Thiviyanathan, Vimal A. and Shirley, Gee Hoon Tang and Yang, Sing Leong and Hui, Jing Lee and Hannan, Mahammad A. and Jamaludin, Md. Zaini and Mahdi, Mohd Adzir (2021) The amber-colored liquid: a review on the color standards, methods of detection, issues and recommendations. SENSORS, 21 (20). art. no. 6866. pp. 1-41. ISSN 1424-8239; ESSN: 1424-8220

Heng, Hui Shan and Noor Hasnan, Noor Zafira and Md Yusoff, Yuzainee and Abdul Aziz, Norashikin and Mohd Basri, Mohd Salahuddin (2021) Operational and hygiene problems due to poor floor drain design and installation in a meat processing. Journal of Hygienic Engineering and Design, 36. pp. 3-16. ISSN 1857- 8489

Ho, Shu Fen and Chin, Yit Siew and Mohamed Shariff, Abdul Rashid and Lim, Poh Ying (2021) Associations of eating behaviours, fast food purchasing and availability with BMI-for-age z-score among adolescents in Labuan, Malaysia. Malaysian Journal of Nutrition, 27 (1). 107 - 122. ISSN 1394-035X

Hoo, Khoo Kar and Md Said, Mohamad Syazarudin (2021) Air gasification of empty fruit bunch: an Aspen Plus model. Bioresource Technology Reports, 16. art. no. 100848. pp. 1-10. ISSN 2589-014X

Hossain, Md. Jubayer and Chowdhury, Jahedul Islam and Balta-Ozkan, Nazmiye and Asfand, Faisal and Saadon, Syamimi and Imran, Muhammad (2021) Design optimization of supercritical carbon dioxide (s-CO2) cycles for waste heat recovery from marine engines. Journal of Energy Resources Technology, Transactions of the ASME, 143 (12). pp. 1-11. ISSN 0195-0738; ESSN: 1528-8994

Houma, Abdusslam Ahmad and Kamal, Md. Rowshon and Mojid, Md Abdul and Abdullah, Ahmad Fikri and Wayayok, Aimrun (2021) Climate change impacts on rice yield of a large-scale irrigation scheme in Malaysia. Agricultural Water Management, 252. art. no. 106908. pp. 1-16. ISSN 0378-3774

How, Darren Jin Aik and Ismail, Mohd Hasmadi and Muharam, Farrah Melissa and Alias, Mohamad Azani (2021) Evaluating the impacts of land use/land cover changes across topography against land surface temperature in Cameron Highlands. PLoS One, 16 (5). art. no. 0252111. pp. 1-26. ISSN 1932-6203

How, Muhammad Syahmeer and Jones, Jim R. and Morgenstern, Marco P. and Gray-Stuart, Eli and Bronlund, John E. and Saint-Eve, Anne and Trelea, Ioan Cristian and Souchon, Isabelle (2021) Modelling the role of oral processing on in vivo aroma release of white rice: conceptual model and experimental validation. LWT - Food Science and Technology, 141. art. no. 110918. pp. 1-8. ISSN 0023-6438

Husin, Nur A. and Bejo, Siti Khairunniza and Abdullah, Ahmad F. and M. Kassim, Muhamad S. and Ahmad, Desa (2021) Multi-temporal analysis of terrestrial laser scanning data to detect basal stem rot in oil palm trees. Precision Agriculture, 23. pp. 101-126. ISSN 1385-2256; ESSN: 1573-1618

Hussain, Mohamed Hasaan and Abu Bakar, Noor Fitrah and Low, Kim-Fatt and Mustapa, Ana Najwa and Adam, Fatmawati and Naim, Mohd Nazli and Lenggoro, I. Wuled (2021) Growth-controlled synthesis of polymer-coated colloidal-gold nanoparticles using electrospray-based chemical reduction. Particuology, 57. 72 - 81. ISSN 1674-2001; ESSN: 2210-4291

Hussain, Muhammad Sabir and Sulaiman, Nasri and Noordin, Nor Kamariah (2021) LTE network analysis in frequency reuse recycling techniques. Pertanika Journal of Science & Technology, 29 (1). pp. 519-531. ISSN 0128-7680; ESSN: 2231-8526

Hussain, Muhammad Sabir and Suleiman, Nasri and Noordin, Nor Kamariah (2021) LTE network analysis in frequency reuse recycling techniques. Pertanika Journal of Science & Technology, 29 (1). pp. 519-531. ISSN 0128-7680; ESSN: 2231-8526

Hussein, Ahmed Faeq and Hashim, Shaiful Jahari and Rokhani, Fakhrul Zaman and Wan Adnan, Wan Azizun (2021) An automated high-accuracy detection scheme for myocardial ischemia based on multi-lead long-interval ECG and Choi-Williams time-frequency analysis incorporating a multi-class SVM classifier. Sensors, 21 (7). art. no. 2311. pp. 1-18. ISSN 1424-8220

Hussein, Wael Ali and Mohd Ali, Borhanuddin and A. Rasid, Mohd Fadlee and Hashim, Fazirulhisyam (2021) Smart geographical routing protocol achieving high QoS and energy efficiency based for wireless multimedia sensor networks. Egyptian Informatics Journal, 23 (2). pp. 225-238. ISSN 1110-8665; ESSN: 2090-4754

Hussien, Hassan Mansur and Md Yasin, Sharifah and Udzir, Nur Izura and Ninggal, Mohd Izuan Hafez and Salman, Sadeq (2021) Blockchain technology in the healthcare industry: trends and opportunities. Journal of Industrial Information Integration, 22. art. no. 100217. pp. 1-23. ISSN 2452-414X

Ibrahim, Abeer Abdalla Zakaria and Hashim, Fazirulhisyam and Noordin, Nor Kamariah and Sali, Aduwati and Navaie, Keivan and Fadul, Saber Mohammed Elnour (2021) Heuristic resource allocation algorithm for controller placement in multi-control 5G based on SDN/NFV architecture. IEEE Access, 9. 2602 - 2617. ISSN 2169-3536

Ibrahim, Nor Izaida and Shahar, Farah Syazwani and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Safri, Syafiqah Nur Azrie and Mat Yazik, Muhamad Hasfanizam (2021) Overview of bioplastic introduction and its applications in product packaging. Coatings, 11 (11). art. no. 1423. pp. 1-23. ISSN 2079-6412

Ibrahim, Nur Ul Atikah and Abd Aziz, Samsuzana and Jamaludin, Diyana and Harith, Hazreen Haizi (2021) Development of smartphone-based imaging techniques for the estimation of chlorophyll content in lettuce leaves. Food Research, 5 (suppl.1). 33 - 38. ISSN 2550-2166

Idan, Zinah N. and Abdulhussain, Sadiq H. and Mahmmod, Basheera M. and Al-Utaibi, Khaled A. and Syed Abdul Rahman Al-, Syed Abdul Rahman Al-Hadad and Sait, Sadiq M. (2021) Fast shot boundary detection based on separable moments and support vector machine. IEEE Access, 9. 106412 - 106427. ISSN 2169-3536

Ishak, Farah Diana and Romli, Fairuz Izzudin (2021) Design selection for new In-Flight food delivery and waste collection system of commercial passenger transport aircraft using TOPSIS. Journal of Mechanical Engineering, 18 (3). 233 - 245. ISSN 1823-5514; ESSN: 2550-164X

Islam, Syed Zahurul and Othman, Mohammad Lutfi and Islam, Syed Zahidul (2021) Performance analysis of ZigBeePRO network using shortest path algorithm for Distributed Renewable Generation. Elektronika Ir Elektrotechnika, 27 (6). pp. 49-56. ISSN 1392-1215; ESSN: 2029-5731

Ismail, Haqi Khalid and Hashim, Shaiful Jahari and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Hashim, Fazirulhisyam and Chaudhary, Muhammad Akmal (2021) Cross-SN: a lightweight authentication scheme for a multi-server platform using IoT-based wireless medical sensor network. Electronics, 10 (7). pp. 1-17. ISSN 2079-9292

Ismail, Muhammad Heikal and Hii, Ching Lik and Routray, Winny and Woo, Meng Wai (2021) Determining the effect of pre-treatment in rice noodle quality subjected to dehydration through hierarchical scoring. Processes, 9 (8). art. no. 1309. pp. 1-13. ISSN 2227-9717

Ismail, Siti Amni and Mat Su, Ahmad Suhaizi and Mohd Mustafah, Anas and Yahya, Azmi and Asib, Norhayu (2021) Drone payload and flying speed effects on rotor blades' RPM and traveling pattern for agricultural chemical spraying. Basrah Journal of Agricultural Sciences, 34 (spec.1). 157 - 170. ISSN 1814-5868; ESSN: 2520-0860

Izdihar, Kamal and Abdul Razak, Hairil Rashmizal and Supion, Nurzulaikha and Abdul Karim, Muhammad Khalis and Osman, Nurul Huda and Mazlan, Norkhairunnisa (2021) Structural, mechanical, and dielectric properties of polydimethylsiloxane and silicone elastomer for the fabrication of clinical-grade kidney phantom. Applied Sciences, 11 (3). art. no. 1172. Jan-13. ISSN 2076-3417

Jaafar, Che Nor Aiza and As'arry, Azizan and Ismail, Rezawati and Zainol, Ismail and T-Dele-Afolabi, Temitope (2021) Factors affecting the quality of technical processes training. International Journal of Manufacturing Economics and Management, 1 (1). 59 - 64. ISSN 2784-1278

Jaafar, Che Nor Aiza and Zainol, Ismail and Calin, Recep (2021) Effects of heat treatment on the hardness properties and microstructure of Al-6505 alloy. International Journal of Engineering Research and Development, 13 (3). 15 - 18. ISSN 2278-800X; ESSN: 2278-067X

Jaafar, Che Nor Aiza and Zainol, Ismail and Ishak, Nurul Syafiqah and Rushdan, Ahmad Ilyas and Salit, Mohd Sapuan (2021) Effects of the liquid natural rubber (LNR) on mechanical properties and microstructure of epoxy/silica/kenaf hybrid composite for potential automotive applications. Journal of Materials Research and Technology-JMR&T, 12. 1026 - 1038. ISSN 2238-7854; ESSN: 2214-0697

Jahun, Bala Gambo and Ahmad, Desa and Mahadi @ Othman, Muhammad Razif and Sulaiman, Shamsuddin and Iya, Shehu Adamu (2021) Effects of degree of oil palm frond mulching using tractor mounted mulcher blades. Journal of Agricultural Engineering, 52 (1). pp. 1-10. ISSN 1974-7071; ESSN: 2239-6268

Jalil, N. A. and Khalid, Nurul Izzah and Sulaiman, Nurul Shaqirah and Sobri, Shafreeza and Taip, Farah Saleena and Ab. Aziz, Norashikin (2021) Conceptual design of a portable electrolyzed water cleaning rig using TRIZ method. Food Research, 5 (suppl.1). 188 - 192. ISSN 2550-2166

Jamali, Nur Syakina and Md Jahim, Jamaliah and Mumtaz, Tabassum and Mohamed Abdul, Peer (2021) Dark fermentation of palm oil mill effluent by Caldicellulosiruptor saccharolyticus immobilized on activated carbon for thermophilic biohydrogen production. Environmental Technology & Innovation, 22. art. no. 101477. pp. 1-12. ISSN 2352-1864

Jamaluddin, Faathirah and Mohd Adzahan, Noranizan and Mohamad Azman, Ezzat and Mohamad, Azizah and Yusof, Noor Liyana and Sulaiman, Alifdalino (2021) A review of clean-label approaches to chilli paste processing. International Journal of Food Science and Technology, 57 (2). pp. 763-773. ISSN 0950-5423; ESSN: 1365-2621

Jamaluddin, Jamhuri and Kamarudin, Norizah and Ismail, Mohd Hasmadi and Ahmad, Siti Azfanizam (2021) Bees algorithm for Forest transportation planning optimization in Malaysia. Forest Science and Technology, 17 (2). 88 - 99. ISSN 2158-010; ESSN: 2158-0715

Jamaludin, N. S. and Samsu Baharuddin, Azhari and Ab Karim, Muhammad Shahrim and Wakisaka, Minato and Abd Rahman, Nur 'Aliaa (2021) Conversion of left-over ice cream into bakery product for food sustainability. Food Research, 6 (3). pp. 254-261. ISSN 2550-2166

Jayaselan, Helena Anusia James and Wan Ismail, Wan Ishak and Mohamed Shariff, Abdul Rashid and Mat Nawi, Nazmi (2021) Evaluation of optimal wavelet de-noising parameters to predict nutrient content in oil palm leaves using spectroradiometer. European Journal of Engineering and Technology Research, 6 (3). 112 - 119. ISSN 2056-5860

Jumaah, Huda Jamal and Kalantar, Bahareh and Abdul Halin, Alfian and Mansor, Shattri and Ueda, Naonori and Jumaah, Sarah Jamal (2021) Development of UAV-based PM2.5 monitoring system. Drones, 5 (3). art. no. 60. pp. 1-12. ISSN 2504-446X

K., Vidyatharran and M. A., Azmah Hanim and Dele-Afolabi, T. T. and Matori, K. A. and O., Saliza Azlina (2021) Microstructural and shear strength properties of GNSs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish. Journal of Materials Research and Technology, 15. 2497 - 2506. ISSN 2238-7854

Kadim, Emran Jawad and Ahmad Noorden, Zulkarnain and Adzis, Zuraimy (2021) Nanoparticles application in high voltage insulation systems. IEEE Transactions on Dielectrics and Electrical Insulation, 28 (4). 1380 - 1399. ISSN 1070-9878; ESSN: 1558-4135

Kalaivaanan, P. M. and Sali, Aduwati and Raja Abdullah, Raja Syamsul Azmir and Yaakob, Syamsuri and Jit Singh, Mandeep and Al-Saegh, Ali M. (2021) On-the-move measurement analysis for Ka-band high throughput satellite and LiFi communication networks in tropical region. IEEE Access, 9. pp. 71344-71355. ISSN 2169-3536

Kamairudin, Norsuhaili and Seng, Soi Hoong and Abdullah, Luqman Chuah and Ariffin, Hidayah and Awang Biak, Dayang Radiah (2021) Optimisation of epoxide ring-opening reaction for the synthesis of bio-polyol from palm oil derivative using response surface methodology. Molecules, 26 (3). art. no. 648. pp. 1-21. ISSN 1420-3049

Kamaruddin, Zatil Hazrati and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Jumaidin, Ridhwan (2021) Effect of plasticizers on physical, thermal, and tensile properties of thermoplastic films based on Dioscorea hispida starch. International Journal of Biological Macromolecules, 185. 219 - 228. ISSN 0141-8130

Kamaruddin, Zatil Hazrati and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Jumaidin, Ridhwan (2021) Extraction and characterization of potential biodegradable materials based on Dioscorea hispida tubers. Polymers, 13 (4). pp. 1-19. ISSN 2073-4360

Kamarudin, Nuruldiyanah and Awang Biak, Dayang Radiah and Zainal Abidin, Zurina and Cardona, Francisco and Salit, Mohd Sapuan (2021) Dissolution of condensed tannin powder-based polyphenolic compound in water-glycerol-acid solution. BioResources, 16 (1). 1798 - 1815. ISSN 1930-2126

Kamin, Zykamilia and Chiam, Chel Ken and Anisuzzaman, S. M. and Abdul Ghani, Nurhamizah and Abdullah, Mohammad and Vai Bahrun, Mohd Hardyianto and Bono, Awang (2021) Tomato - characteristics, processing and future trends in automation for smallholder processing industry: a short review. Transactions on Science and Technology, 8 (3-2). 210 - 219. ISSN 2289-8786

Kania, Dina and Yunus, Robiah and Omar, Rozita and Abdul Rashid, Suraya and Mohamed Jan, Badrul and Aulia, Akmal (2021) Adsorption of non-ionic surfactants on organoclays in drilling fluid investigated by molecular descriptors and Monte Carlo random walk simulations. Applied Surface Science, 538. art. no. 148154. pp. 1-9. ISSN 0169-4332; ESSN: 1873-5584

Kania, Dina and Yunus, Robiah and Omar, Rozita and Abdul Rashid, Suraya and Mohamed Jan, Badrul and Aulia, Akmal (2021) Lubricity performance of non-ionic surfactants in high-solid drilling fluids: a perspective from quantum chemical calculations and filtration properties. Journal of Petroleum Science and Engineering, 207. pp. 1-10. ISSN 0920-4105; ESSN: 1873-4715

Karami, Mahdi and Mariun, Norman and Ab Kadir, Mohd Zainal Abidin and Misron, Norhisam and Mohd Radzi, Mohd Amran (2021) Motor current signature analysis-based non-invasive recognition of mixed eccentricity fault in line start permanent magnet synchronous motor. Electric Power Components and Systems, 49 (1-2). 133 - 145. ISSN 1532-5008; ESSN: 1532-5016

Katibi, Kamil Kayode and Yunos, Khairul Faezah and Che Man, Hasfalina and Aris, Ahmad Zaharin and Mohd Nor, Mohd Zuhair and Azis, Raba'ah Syahidah and Mohammed Umar, Abba (2021) Contemporary techniques for remediating endocrine-disrupting compounds in various water sources: advances in treatment methods and their limitations. Polymers, 13 (19). pp. 1-20. ISSN 2073-4360

Katibi, Kamil Kayode and Yunos, Khairul Faezah and Che Man, Hasfalina and Aris, Ahmad Zaharin and Mohd Nor, Mohd Zuhair and Azis, Rabaah Syahidah (2021) Recent advances in the rejection of endocrine-disrupting compounds from water using membrane and membrane bioreactor technologies: a review. Polymers, 13 (3). art. no. 392. pp. 1-52. ISSN 2073-4360

Khaled, Alfadhl Yahya and Abd Aziz, Samsuzana and Bejo, Siti Khairunniza and Mat Nawi, Nazmi and Abu Seman, Idris (2021) Artificial intelligence for spectral classification to identify the basal stem rot disease in oil palm using dielectric spectroscopy measurements. Tropical Plant Pathology, 47. pp. 140-151. ISSN 1983-2052

Khalid, Haqi and Hashim, Shaiful Jahari and Syed Ahmad, Sharifah Mumtazah and Hashim, Fazirulhisyam and Chaudhary, Muhammad Akmal (2021) Robust multi-gateway authentication scheme for agriculture wireless sensor network in society 5.0 smart communities. Agriculture, 11 (10). art. no. 1020. 01-34. ISSN 0002-1709; ESSN: 2077-0472

Khalid, Haqi and Hashim, Shaiful Jahari and Syed Ahmad, Sharifah Mumtazah and Hashim, Fazirulhisyam and Chaudhary, Muhammad Akmal (2021) A lightweight and secure online/offline cross-domain authentication scheme for VANET systems in Industrial IoT. PeerJ Computer Science, 7. art. no. 714. pp. 1-22. ISSN 2376-5992

Khalid, Haqi and Hashim, Shaiful Jahari and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Hashim, Fazirulhisyam and Chaudhary, Muhammad Akmal (2021) SELAMAT: a new secure and lightweight multi-factor authentication scheme for cross-platform industrial IoT systems. Sensors, 21 (4). art. no. 1428. pp. 1-32. ISSN 1424-8239; ESSN: 1424-8220

Khalid, Haqi and Hashim, Shaiful Jahari and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Hashim, Fazirulhisyam and Chaudhary, Muhammad Akmal (2021) A new hybrid online and offline multi-factor cross-domain authentication method for IoT applications in the automotive industry. Energies, 14 (21). art. no. 7437. pp. 1-34. ISSN 1996-1073

Khalid,, N. I. and Sulaiman, N. S and Ab Aziz, N. and Taip, F. S. and Sobri, S. and Nor-Khaizura, M. A. R. (2021) Stability of electrolyzed water: from the perspective of food industry. Food Research, 5 (supp.1). 47 - 56. ISSN 0095-974X; ESSN: 2550-2166

Khasib, Isam Adnan and Nik Daud, Nik Norsyahariati and Mohd Nasir, Noor Azline (2021) Strength development and microstructural behavior of soils stabilized with palm oil fuel ash (POFA)-based geopolymer. Applied Sciences (Switzerland), 11 (8). art. no. 3572. pp. 1-15. ISSN 2076-3417

Khoso, Ali Raza and Yusof, Md Aminah and Leghari, Muhammad Aslam and Siddiqui, Fida and Sohu, Samiullah (2021) Public tendering practices, issues and directions - a case of Pakistan construction sector. Pertanika Journal of Science & Technology, 29 (1). pp. 123-147. ISSN 0128-7680; ESSN: 2231-8526

Khosravi, Faranak and Mokhtar, Makhfudzah and P., Thirunvakkarasu and Mahdi, Mohd Adzir (2021) Effect of self phase modulation on three level code division multiplexing technique. International Journal of Scientific Research in Physics and Applied Sciences, 9 (3). 21 - 24. ISSN 2348-3423

Khudher, Shaker Mahmood and Aris, Ishak and Othman, Mohammad Lutfi and Mailah, Nashiren Farzilah (2021) Output-input hybrid passive filter design for electric vehicle charging station. Al-Rafidain Engineering Journal, 26 (2). 132 - 142. ISSN 1813-0526; ESSN: 2220-1270

Kok, Zhi Hong and Mohamed Shariff, Abdul Rashid and M. Alfatni, Meftah Salem and Bejo, Siti Khairunniza (2021) Support vector machine in precision agriculture: a review. Computers and Electronics in Agriculture, 191. pp. 1-12. ISSN 0168-1699; ESSN: 1872-7107

Kong, T. Y. and Noor Hasnan, Noor Zafira and Alias, Nur Diyana and Mohd Zulkifli, Nurin Izzati and Kadir Basha, Roseliza and Abdul Ghani, Nur Hamizah and Ab. Aziz, Norashikin (2021) Effect of different pasteurisation temperature on physicochemical properties, bioactive compounds, antioxidant activity and microbiological qualities of reconstituted pomegranate juice (RPJ). Food Research, 4 (suppl. 6). 157 - 164. ISSN 2550-2166

Konneh, Keifa Vamba and Masrur, Hasan and Othman, Mohammad Lutfi and Abdul Wahab, Noor Izzri and Hizam, Hashim and Islam, Syed Zahurul and Crossley, Peter and Senjyu, Tomonobu (2021) Optimal design and performance analysis of a hybrid off-grid renewable power system considering different component scheduling, PV modules, and solar tracking systems. IEEE Access, 9. 64393 - 64413. ISSN 2169-3536

Konneh, Keifa Vamba and Masrur, Hasan and Othman, Mohammad Lutfi and Takahashi, Hiroshi and Krishna, Narayanan and Senjyu, Tomonobu (2021) Multi-attribute decision-making approach for a cost-effective and sustainable energy system considering weight assignment analysis. Sustainability, 13 (10). art. no. 5615. pp. 1-22. ISSN 2071-1050

Kumar, Pavitra and Lai, Sai Hin and Mohd, Nuruol Syuhadaa and Kamal, Md. Rowshon and Ahmed, Ali Najah and Sherif, Mohsen and Sefelnasr, Ahmed and Ahmed El-Shafie, Ahmed Hussein Kamel (2021) Enhancement of nitrogen prediction accuracy through a new hybrid model using ant colony optimization and an Elman neural network. Engineering Applications of Computational Fluid Mechanics, 15 (1). 1843 - 1867. ISSN 1994-2060; ESSN: 1997-003X

Kumaravelu, Thavamalar and Saadon, Syamimi and Abu Talib, Abd Rahim (2021) Heat transfer enhancement of a Stirling engine by using fins attachment in an energy recovery system. Energy, 239 (pt. A). pp. 1-12. ISSN 0360-5442

Lau, Siew Wen and Chong, Ann Qi and Chin, Nyuk Ling and A. Talib, Rosnita and Kadir Basha, Roseliza (2021) Sourdough microbiome comparison and benefits. Microorganisms, 9 (7). art. no. 1355. pp. 1-24. ISSN 2076-2607

Lawal, Abubakar Abdullahi and Hassan, Mohd Ali and Ahmad Farid, Mohammed Abdillah and Tengku Yasim-Anuar, Tengku Arisyah and Samsudin, Mohd Hafif and Mohd Yusoff, Mohd Zulkhairi and Zakaria @ Mamat, Mohd Rafein and Mokhtar, Mohd Noriznan and Shirai, Yoshihito (2021) Adsorption mechanism and effectiveness of phenol and tannic acid removal by biochar produced from oil palm frond using steam pyrolysis. Environmental Pollution, 269. art. no. 116197. pp. 1-10. ISSN 0269-7491; ESSN: 1873-6424

Lawal, Abubakar Abdullahi and Hassan, Mohd Ali and Zakaria @ Mamat, Mohd Rafein and Mohd Yusoff, Mohd Zulkhairi and Norrrahim, Mohd Nor Faiz and Mokhtar, Mohd Noriznan and Shirai, Yoshihito (2021) Effect of oil palm biomass cellulosic content on nanopore structure and adsorption capacity of biochar. Bioresource Technology, 332. art. no. 125070. pp. 1-7. ISSN 0960-8524; ESSN: 1873-2976

Lee, Ching Hao and Abdan, Khalina and Norizan, Mohd Nurazzi and Abdullah, Norli and M., M. Harussani and Shafi, Ayu Rafiqah and Alias, Aisyah Humaira and Ramli, Natasha (2021) The challenges and future perspective of Kenaf Wo-ven reinforcement in thermoset polymer composites in Malaysia: a review. Polymers, 13 (9). art. no. 1390. pp. 1-17. ISSN 2073-4360

Lee, Jesse Kar Ming and Anuar, Mohd Shamsul and Mohd Firdaus How, Muhammad Syahmeer How and Mohd Noor, Samsul Bahari and Abdullah, Zalizawati and Taip, Farah Saleena (2021) Development of an artificial neural network utilizing particle swarm optimization for modeling the spray drying of coconut milk. Foods, 10 (11). art. no. 2708. pp. 1-14. ISSN 2304-8158

Lee, Ka Kit and Low, Darren Yi Sern and Foo, Mei Ling and Yu, Lih Jiun and Choong, Thomas Shean Yaw and Tang, Siah Ying and Tan, Khang Wei (2021) Molecular dynamics simulation of nanocellulose-stabilized pickering emulsions. Polymers, 13 (4). art. no. 668. pp. 1-15. ISSN 2073-4360

Li, Xiao Ju and Abdullah, Luqman Chuah and Sobri, Shafreeza and Md Said, Mohamad Syazarudin and Hussain, Siti Aslina and Tan, Poh Aun (2021) Overview of air pollution in typical basin of China under the target of carbon neutrality. International Journal of Environmental Research, 15 (6). 1109 - 1138. ISSN 1735-6865; ESSN: 2008-2304

Li, Xiao Ju and Hussain, Siti Aslina and Sobri, Shafreeza and Md Said, Mohamad Syazarudin (2021) Overviewing the air quality models on air pollution in Sichuan Basin, China. Chemosphere, 271. art. no. 129502. pp. 1-14. ISSN 0045-6535; ESSN: 1879-1298

Lim, Fong Peng and Omar Baki, Sharudin and Arifin, N. M. and Mansor, Yaakob and Nazri, Ahmad and Abbas, Bashar Khudhair (2021) Structural, thermal and optical properties of rare earth doped lead-tellurite oxide glasses. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 81 (2). 52 - 58. ISSN 2289 - 7879

Lim, J. and Taip, Farah Saleena and Ab. Aziz, Norashikin and M. N., Ibrahim and Mohd Firdaus How, Muhammad Syahmeer How (2021) Effects of drying methods on the physicochemical properties of powder made from different parts of pumpkin. Food Research, 5 (suppl.1). 160 - 167. ISSN 2550-2166

Loganathan, Tamil Moli and Hameed Sultan, Mohamed Thariq and Ahsan, Qumrul and Jawaid, Mohammad and Naveen, Jesuarockiam and Md Shah, Ain Umaira and Abu Talib, Abd. Rahim and Basri, Adi Azriff and Jaafar, Che Nor Aiza (2021) Effect of Cyrtostachys renda fiber loading on the mechanical, morphology, and flammability properties of multi-walled carbon nanotubes/phenolic bio-composites. Nanomaterials, 11 (11). pp. 1-25. ISSN 2079-4991

Loganathan, Tamil Moli and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Ahsan, Qumrul and Naveen, Jesuarockiam and Md Shah, Ain Umaira and Abu Talib, Abd. Rahim and Basri, Adi Azriff (2021) Physical, mechanical, and morphological properties of hybrid Cytostachys renda/kenaf fiber reinforced with multi-walled carbon nanotubes MWCNT-phenolic composites. Polymers, 13 (19). art. no. 3448. pp. 1-18. ISSN 2073-4360

Lokman, Muhammad Quisar and Mohd Rusdi, Muhammad Farid and Aiman Rosol, Ahmad Haziq and Ahmad, Fauzan and Shafie, Suhaidi and Yahaya, Hafizal and Mohd Rosnan, Rizuan and Abdul Rahman, Mohd Azizi and Harun, Sulaiman Wadi (2021) Synthesis of silver nanoparticles using chemical reduction techniques for Q-switcher at 1.5 Î¼m region. Optik, 244. pp. 1-9. ISSN 0030-4026; ESSN: 1618-1336

Loqman, Nadiah and Safiee, Nor Azizi and Wong, Hui Kah and Abu Bakar, Nabilah and Mohd Nasir, Noor Azline (2021) Behaviour of interlocking concrete slab and steel composite beam incorporated bolt shear connector. Australian Journal of Structural Engineering, 22 (3). pp. 236-249. ISSN 1328-7982; ESSN: 2204-2261

Luhaim, Zibeon and Tan, Mou Leong and Tangang, Fredolin and Zulkafli, Zed Diyana and Kwok, Pan Chun and Yusop, Zulkifli and Yaseen, Zaher Mundher (2021) Drought variability and characteristics in the Muda River Basin of Malaysia from 1985 to 2019. Atmosphere, 12 (9). pp. 1-19. ISSN 2073-4433

M. J., Suriani and Zainudin, Hasliana Asyikin and Ilyas, R. A. and Petrů, Michal and Salit, Mohd Sapuan and Ghazali, Che Mohd Ruzaidi and Mustapha, Rohani (2021) Kenaf fiber/pet yarn reinforced epoxy hybrid polymer composites: morphology, tensile and flammability properties. Polymers, 13 (9). art. no. 1532. pp. 1-18. ISSN 2073-4360

M. J., Suriania and Rapi, Hannah Zalifah and Ilyas, R. A. and Petrů, Michal and Salit, Mohd Sapuan (2021) Delamination and manufacturing defects in natural fiber-reinforced hybrid composite: a review. Polymers, 13 (8). pp. 1-24. ISSN 2073-4360

M.F.I., Azmi and Jamaludin, Diyana and Abd Aziz, Samsuzana and Yusof, Yus Aniza and Mohd Mustafah, Anas (2021) Adulterated stingless bee honey identification using VIS-NIR spectroscopy technique. Food Research, 5 (1). 85 - 93. ISSN 2550-2166

M.J., Suriani and Salit, Mohd Sapuan and C. M., Ruzaidi and D. S., Nair and R. A., Ilyas (2021) Flammability, morphological and mechanical properties of sugar palm fiber/polyester yarn-reinforced epoxy hybrid biocomposites with magnesium hydroxide flame retardant filler. Textile Research Journal, 91 (21-22). 2600 - 2611. ISSN 0040-5175; ESSN: 1746-7748

M.Saber, Shihab Ezzuldin and Abdullah, Luqman Chuah and Md. Jamil, Siti Nurul Ain and Choong, Thomas S. Y. and Teo, Ming Ting (2021) Trimethylamine functionalized radiation-induced grafted polyamide 6 fibers for p-nitrophenol adsorption. Scientific Reports, 11. art. no. 19573. pp. 1-17. ISSN 2045-2322

Mad Ali, Mohd Fahmi and Mohd Ariffin, Mohd Khairol Anuar and Mustapha, Faizal and Supeni, Eris Elianddy (2021) An unsupervised machine learning-based framework for transferring local factories into supply chain networks. Mathematics, 9 (23). art. no. 3114. pp. 1-31. ISSN 2227-7390

Mahat, S. B. and Omar, Rozita and Che Man, Hasfalina and Md Idris, Aida Isma and Mustapa Kamal, Siti Mazlina and Abdullah, Luqman Chuah and Shreeshivadasan, C. (2021) Dynamic anaerobic membrane bioreactor (DAnMBR) with phase separation for food processing wastewater treatment at mesophilic temperature: characterization of cake layer. Journal of Environmental Chemical Engineering, 9 (4). art. no. 105718. pp. 1-14. ISSN 2213-3437

Mahat, Siti Baizurah and Omar, Rozita and Che Man, Hasfalina and Mohamad Idris, Aida Isma and Mustapa Kamal, Siti Mazlina and Idris, Azni and Chelliapan, Shreeshivadasan and Jamali, Nur Syakina and Abdullah, Luqman Chuah (2021) Performance of dynamic anaerobic membrane bioreactor DAnMBR with phase separation in treating high strength food processing wastewater. Journal of Environmental Chemical Engineering, 9 (3). art. no. 105245. pp. 1-15. ISSN 2213-2929; ESSN: 2213-3437

Makzin, Norfaezah and Mohamed Zawawi, Mohamed Azwan and Wayayok, Aimrun (2021) Delineation of lithological formation in Bukit Merah, Semanggol, Perak using groundwater modelling. Journal of Agricultural and Food Engineering, 1. art. no. 0031. pp. 1-9. ISSN 2716-6236

Malhas, Yazeed and Muniandy, Ratnasamy and Hassim, Salihudin and Mohd Jakarni, Fauzan (2021) Establishing stress boundaries for various loading and pavement configuration. IOP Conference Series: Materials Science and Engineering, 1075 (2021). art. no. 012027. pp. 1-9. ISSN 1757-899X

Maliki, Intan Mariana and Abdul Manas, Nor Hasmaliana and Ahmad, Siti Aqlima and Zulkharnain, Azham (2021) Expression, purification and characterization of extradiol dioxygenase carbb involved in carbazole degradation pathway. Malaysian Journal of Biochemistry and Molecular Biology, 24 (1). 77 - 82. ISSN 2600-9005

Maluin, Farhatun Najat and Hussein, Mohd Zobir and Nik Ibrahim, Nik Nor Liyana and Wayayok, Aimrun and Hashim, Norhayati (2021) Some emerging opportunities of nanotechnology development for soilless and microgreen farming. Agronomy, 11 (6). art. no. 1213. pp. 1-28. ISSN 2073-4395

Marzuki, Omar Faruqi and Ellie, Teo Yih Lih and Mohd Rafie, Azmin Shakrine (2021) The mechanism of drone seeding technology: a review. Malaysian Forester, 84 (2). 349 - 358. ISSN 0302-2935

Masoud, Fathi and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Nukman, Y. and Bayraktar, Emin (2021) Experimental analysis of heat-affected zone HAZ in laser cutting of sugar palm fiber reinforced unsaturated polyester composites. Polymers, 13 (5). pp. 1-13. ISSN 2073-4360

Masoud, Fathi and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Nukman, Y. and Bayraktar, Emin (2021) Experimental analysis of kerf taper angle in cutting process of sugar palm fiber reinforced unsaturated polyester composites with laser beam and abrasive water jet cutting technologies. Polymers, 13 (15). pp. 1-24. ISSN 2073-4360

Masrur, Hasan and Konneh, Keifa Vamba and Ahmadi, Mikaeel and Khan, Kaisar R. and Othman, Mohammad Lutfi and Senjyu, Tomonobu (2021) Assessing the techno-economic impact of derating factors on optimally tilted grid-tied photovoltaic systems. Energies, 14 (4). art. no. 1044. pp. 1-21. ISSN 1996-1073

Mat Din, Hazwan and Raja Adnan, Raja Nurzatul Efah and Nor Akahbar, Siti Aisyah and Ahmad, Siti Anom (2021) Characteristics of COVID-19-related deaths among older adults in Malaysia. Malaysian Journal of Medical Sciences, 28 (4). 138 - 145. ISSN 1394-195X

Mat Jusoh, Suriani and Salit, Mohd Sapuan and Ghazali, Che Mohd Ruzaidi and Jesuarockiam, Naveen and H., Syukriyah and M., Ziefarina (2021) Correlation of manufacturing defects and impact behaviors of kenaf fiber reinforced hybrid fiberglass/Kevlar polyester composite. Polimery, 66 (1). 30 - 35. ISSN 0032-2725

Mat Radzi, Siti Fairuz and Abdul Karim, Muhammad Khalis and Saripan, M. Iqbal and Abd Rahman, Mohd Amiruddin and Che Isa, Iza Nurzawani and Ibahim, Mohammad Johari (2021) Hyperparameter tuning and pipeline optimization via grid search method and tree-based AutoML in breast cancer prediction. Journal of Personalized Medicine, 11 (10). pp. 1-12. ISSN 2075-4426

Mazlan, Norkhairunnisa and Tay, Chai Hua and Hameed Sultan, Mohamed Thariq and Abdan, Khalina (2021) Thermogravimetric and dynamic mechanical analysis of woven glass/kenaf/epoxy hybrid nanocomposite filled with clay. Advances in Materials and Processing Technologies, 7 (1). 166 - 179. ISSN 2374-068X; ESSN: 2374-0698

Md Azmi, Nik Salwani and Anuar, Nornizar and Othman, Muhamad Fitri and Abu Bakar, Noor Fitrah and Naim, Mohd Nazli (2021) Electric-potential-assisted crystallisation of L-isoleucine: a study of nucleation kinetics and its associated parameters. Crystals, 11 (6). art. no. 620. pp. 1-20. ISSN 2073-4352

Md Damiri, Mohamad Hazrol and Salit, Mohd Sapuan and Zainudin, Edi Syams and Mohamed Yusoff, Mohd Zuhri and Abdul Wahab, Noor Izzri (2021) Corn starch (Zea mays) biopolymer plastic reaction in combination with sorbitol and glycerol. Polymers, 13 (2). pp. 1-22. ISSN 2073-4360

Md Said, Mohamad Syazarudin and Azni, Atiyyah Ameenah and Wan Ab Karim Ghani, Wan Azlina and Idris, Azni and Ja'afar, Mohamad Fakri Zaky and Mohd Salleh, Mohamad Amran (2021) Production of biochar from microwave pyrolysis of empty fruit bunch in an alumina susceptor. Energy, 240. art. no. 122710. pp. 1-10. ISSN 1751-4223; ESSN: 1751-4231

Md Said, Mohamad Syazarudin and Mohd Tohir, Mohd Zahirasri (2021) Characterisation of thermal runaway behaviour of cylindrical lithium-ion battery using Accelerating Rate Calorimeter and oven heating. Case Studies in Thermal Engineering, 28. art. no. 101474. pp. 1-16. ISSN 2214-157X

Md Saleh, Nur Izzati and Wan Ab Karim Ghani, Wan Azlina and Mustapa Kamal, Siti Mazlina and Harun, Razif (2021) Performance of single and two-stage cross-flow ultrafiltration membrane in fractionation of peptide from microalgae protein hydrolysate (nannochloropsis gaditana). Processes, 9 (4). art. no. 610. pp. 1-20. ISSN 2227-9717

Md Yunos, Noor Seribainun Hidayah and Omar, Farah Nadia and Hafid, Halimatun Saadiah and P. Mohammed, Mohd Afandi and Baharuddin, Azhari Samsu and Wakisaka, Minato (2021) Experimental and numerical study of wheat and rice doughs. Journal of Food Engineering, 311. art. no. 110712. pp. 1-12. ISSN 0260-8774

Md Yusoff, Irwan Syah and Mohd Tamrin, Shamsul Bahri and Ismail, Muhammad Heikal (2021) Ergonomic perspective: mismatch between seat drivers and anthropometric measures of elderly taxi drivers in Malaysia. International Journal of Integrated Engineering, 13 (5). pp. 156-162. ISSN 2229-838X

Md Yusoff, Nelidya and Lau, Kuen Yao and Sulaiman, Abdul Hadi and Mohd Yusoff, Norita and Mahdi, Mohd Adzir (2021) Stable dual-wavelength laser incorporating polarization-maintaining erbium-doped fiber. Optics & Laser Technology, 135. pp. 1-5. ISSN 0030-3992; ESSN: 1879-2545

Meei, Chien Quek and Nyuk, Ling Chin and Sheau, Wei Tan (2021) Optimum DNA extraction methods for edible bird’s nest identification using simple additive weighting technique. Foods, 10 (5). art. no. 1086. pp. 1-12. ISSN ESSN: 2304-8158

Mohamad, Nur Aqilah and Azis, Norhafiz and Jasni, Jasronita and Ab. Kadir, Mohd. Zainal Abidin and Yunus, Robiah and Yaakub, Zaini (2021) Experimental study on the partial discharge characteristics of palm oil and coconut oil based Al2O3 Nanofluids in the presence of sodium dodecyl sulfate. Nanomaterials, 11 (3). art. no. 786. pp. 1-19. ISSN 2079-4991

Mohamad Ghazali, Nashratul Shera and Yusof, Yus Aniza and Mohd Ghazali, Hasanah and Chin, Nyuk Ling and Othman, Siti Hajar and Manaf, Yanty Noorzianna and Chang, Lee Sin and Mohd Baroyi, Syahrul Anis Hazwani (2021) Effect of surface area of clay pots on physicochemical and microbiological properties of stingless bee (Geniotrigona thoracica) honey. Food Bioscience, 40. art. no. 100839. pp. 1-10. ISSN 2212-4292; ESSN: 2212-4306

Mohamed, Sity Ainy Nor and Zainudin, Edi Syams and Salit, Mohd Sapuan and Md. Deros, Mohd Azaman and Tajul Arifin, Ahmad Mubarak (2021) Crack growth analysis for rice husk reinforced polypropylene composite using equivalent initial flaw size concept. BioResources, 16 (3). 4963 - 4985. ISSN 1930-2126

Mohamed Ariff, Azmah Hanim and Chuan, Khang Wei and Temitope T., Dele-Afolabi and Osman, Saliza Azlina (2021) Shear analysis of rice husk ash RHA reinforced tin- 0.7-copper composite solders on electroless nickel/immersion silver ENIAg surfaces. Materialwissenschaft und Werkstofftechnik, 52 (9). 943 - 951. ISSN 0933-5137; ESSN: 1521-4052

Mohamed Noor, Norramlee and Aris, Ishak and Misron, Norhisam and Shafie, Suhaidi and Iqbal, Parvez (2021) Performance analysis of the linear launcher motor via modelling and simulation for light electric vehicles. Pertanika Journal of Science & Technology, 29 (1). pp. 95-105. ISSN 0128-7680; ESSN: 2231-8526

Mohamed Noor, Norramlee and Aris, Ishak and Misron, Norhisam and Shafie, Suhaidi and Iqbal, Parvez (2021) Performance analysis of the linear launcher motor via modelling and simulation for light electric vehicles. Pertanika journal of science and technology, 29 (1). pp. 95-105. ISSN 2231-8526

Mohamed Razali, Siti Nurumairah and Hamzah, Muhammad Hazwan and Che Man, Hasfalina and Mohd Nor, Mohd Zuhair (2021) Converting durian-based traditional dessert into ready-to-eat durian stick through sausage technology application. Advances in Agricultural and Food Research Journal, 2 (1). pp. 1-16. ISSN 2736-1799

Mohammad Ali, Hidayatullah and Mohd Rafie, Azmin Shakrine and Md Ali, Syaril Azrad (2021) Numerical analysis of leading edge cylinder aerofoil on Selig S1223 for moving surface boundary control. Journal of Aeronautics, Astronautics and Aviation, 53 (2). 143 - 153. ISSN 1990-7710

Mohammad Ali, Hidayatullah and Mohd Rafie, Azmin Shakrine and Md Ali, Syaril Azrad and Gires, Ezanee (2021) Computational analysis of the rotating cylinder embedment onto flat plate. CFD Letters, 13 (12). 133 - 149. ISSN 2180-1363

Mohammad Ata, Karimeh Ibrahim and Che Soh, Azura and Ishak, Asnor Juraiza and Jaafar, Haslina (2021) Guidance system based on Dijkstra-ant colony algorithm with binary search tree for indoor parking system. Indonesian Journal of Electrical Engineering and Computer Science, 24 (2). 1173 - 1182. ISSN 2502-4752; ESSN: 2502-4760

Mohammed, Abdulmohaimen Imad and Rahman, Ahmed Awadh Ba and Mohd Nasir, Noor Azline and Abu Bakar, Nabilah and Safiee, Nor Azizi (2021) Evaluation of the compatibility of modified encapsulated sodium silicate for self-healing of cementitious composites. Applied Sciences, 11 (22). art. no. 10847. pp. 1-21. ISSN 2076-3417

Mohammed, Ibrahim and Abu Talib, Abd Rahim (2021) Experimental investigation of metal- laminates with aerogel in high-temperature application. Journal of Aeronautics Astronautics and Aviation, 53 (2). 121 - 127. ISSN 1990-7710

Mohammed Altarazi, Yazan Sofyan and Abu Talib, Abd Rahim and Gires, Ezanee and Yu, Jianglong and Lucas, John and Yusaf, Talal (2021) Performance and exhaust emissions rate of small-scale turbojet engine running on dual biodiesel blends using Gasturb. Energy, 232. art. no. 120971. pp. 1-9. ISSN 0360-5442; ESSN: 1873-6785

Mohammed Bida, Sani and Abdul Aziz, Farah Nora Aznieta and Jaafar, Mohd Saleh and Hejazi, Farzad and Abu Bakar, Nabilah (2021) Thermal resistance of insulated precast concrete sandwich panels. International Journal of Concrete Structures and Materials, 15. art. no. 41. pp. 1-12. ISSN 1976-0485; ESSN: 2234-1315

Mohammed Ridha, Hussein and Gomes, Chandima and Hizam, Hashim and Ahmadipour, Masoud and Heidari, Ali Asghar and Huiling, Chen (2021) Multi-objective optimization and multi-criteria decision-making methods for optimal design of standalone photovoltaic system: a comprehensive review. Renewable and Sustainable Energy Reviews, 135. art. no. 110202. pp. 1-23. ISSN 1364-0321

Mohammed Sabbar, Huda and Leman, Zulkiflle and Shamsudin, Shazarel and Mohd Tahir, Suraya and Jaafar, Che Nor Aiza and Mohamed Ariff, Azmah Hanim and Zahari, Nur Ismarrubie and Rady, Mohammed H. (2021) The effect of solid-State processes and heat treatment on the properties of AA7075 aluminum waste recycling nanocomposite. Materials, 14 (21). art. no. 6667. pp. 1-20. ISSN 1996-1944

Mohd, Fashareena and Sulaiman, Hanifah and Alias, Nor Azlina (2021) Modified Swanson’s equation to detect the growth of glioblastomas multiforme (GBM) tumour. International Journal of Advanced Research in Engineering Innovation, 3 (1). pp. 1-18. ISSN 2682-8499

Mohd Ali, Maimunah and Hashim, Norhashila and Shahamshah, Muhammad Ikmal (2021) Durian (Durio zibethinus) ripeness detection using thermal imaging with multivariate analysis. Postharvest Biology and Technology, 176. art. no. 111517. pp. 1-8. ISSN 0925-5214

Mohd Amin, Siti Faridah and Karim, Roselina and Yusof, Yus Aniza and Muhammad, Kharidah (2021) Effects of enzymatic liquefaction, drying techniques, and wall materials on the physicochemical properties, bioactivities, and morphologies of zinc-amaranth (Amaranthus viridis L.) powders. International Journal of Food Science, 2021. pp. 1-13. ISSN 2356-7015; ESSN: 2314-5765

Mohd Ariffin, Mohd Ruzaimi and Shafie, Suhaidi and Wan Hasan, Wan Zuha and Azis, Norhafiz and Ya'acob, Mohammad Effendy and Supeni, Eris Elianddy and Wayayok, Aimrun (2021) Performance analysis of thermoelectric generator implemented on non-uniform heat distribution of photovoltaic module. Energy Reports, 7. 2379 - 2387. ISSN 2352-4847

Mohd Basri, Mohd Salahuddin and Liew, Brenda Min Ren and A.Talib, Rosnita and Zakaria, Rabitah and Kamarudin, Siti Hasnah (2021) Novel mangosteen-leaves-based marker ink: color lightness, viscosity, optimized composition, and microstructural analysis. Polymers, 13 (10). art. no. 1581. pp. 1-18. ISSN 2073-4360

Mohd Basri, Mohd Salahuddin and Mohd Nor, Mohd Zuhair and Shamsudin, Rosnah and Mohamed Amin Tawakkal, Intan Syafinaz and Abdul Ghani, Nur Hamizah and Kamarudin, Khairul Manami and Mohd Mustafah, Anas (2021) Effects of different fluting medium geometries on von-mises stress and deformation in single fluted board: a three-dimensional finite element analysis. Advances in Agricultural and Food Research Journal, 2 (1). pp. 1-12. ISSN 2736-1799

Mohd Chachuli, Siti Amaniah and Hamidon, Mohd Nizar and Ertugrul, Mehmet and Mamat Mat Nazir, Md Shuhazlly and Coban, Omer and Tuzluca, Fatma Nur and Yesilbag, Yasar Ozkan and Shamsudin, N. H. (2021) Effects of MWCNTs/graphene nanoflakes/MXene addition to TiO2 thick film on hydrogen gas sensing. Journal of Alloys and Compounds, 882. art. no. 160671. pp. 1-13. ISSN 0925-8388

Mohd Daniyal, Wan Mohd Ebtisyam Mustaqim and Yap, Wing Fen and Abdullah, Jaafar and Sadrolhosseini, Amir Reza and Mahdi, Mohd Adzir (2021) Design and optimization of surface plasmon resonance spectroscopy for optical constant characterization and potential sensing application: theoretical and experimental approaches. Photonics, 8 (9). art. no. 361. pp. 1-19. ISSN 2304-6732

Mohd Daud, Mohd Nazrin and Nik Daud, Nik Norsyahariati (2021) Compressibility characteristics of peat soil treated with MUF-P resin. Solid State Phenomena, 317. 529 - 534. ISSN 1012-0394; ESSN: 1662-9779

Mohd Dom, Zanariah and Mujianto, Lisnurjannah and Azhar, Adibah Zahiah and Masaudin, Saidatul Nurul Atika and Samsudin, Rosnah (2021) Physicochemical properties of banana peel powder in functional food products. Food Research, 5 (suppl.1). 209 - 215. ISSN 2550-2166

Mohd Haniff, Nurin Syazwina and Abdul Karim, Muhammad Khalis and Osman, Nurul Huda and Saripan, M Iqbal and Che Isa, Iza Nurzawani and Ibahim, Mohammad Johari (2021) Stability and reproducibility of radiomic features based various segmentation technique on MR images of Hepatocellular Carcinoma (HCC). Diagnostics, 11 (9). art. no. 1573. pp. 1-16. ISSN 2075-4418

Mohd Harithuddin, Ahmad Salahuddin (2021) A first experience of using failure report as a reflective tool in engineering education. International Journal of Emerging Technologies in Learning, 16 (18). 23 - 37. ISSN 1868-8799; ESSN: 1863-0383

Mohd Johari, Siti Nurul Afiah and Abdol Lajis, Ghaibulna and Keat, Neoh B. and Ithnin, Nalisha and Bejo, Siti Khairunniza and Daim, Leona Daniela Jeffery and Yap, Yun Ci (2021) Detecting BSR-infected oil palm seedlings using thermal imaging technique. Basrah Journal of Agricultural Sciences, 34 (spec.1). 73 - 80. ISSN 1814-5868; ESSN: 2520-0860

Mohd Nasir, Noor Azline and Abu Bakar, Nabilah and Safiee, Nor Azizi and Abdul Aziz, Farah Nora Aznieta (2021) Permeation-durability properties of metakaolin blended concrete containing rubber. European Journal of Environmental and Civil Engineering, 26 (11). pp. 5113-5128. ISSN 1964-8189; ESSN: 2116-7214

Mohd Nasir, Nur Alia Farina and Ab. Kadir, Mohd. Zainal Abidin and Osman, Miszaina and Abd Rahman, Muhamad Safwan and Ungku Amirulddin Al Amin, Ungku Anisa and Mohd Nasir, Mohd Solehin and Zaini, Nur Hazirah and Nik Ali, Nik Hakimi (2021) Effect of Earthing Enhancing Compound (EEC) on improving tower footing resistance of a 500 kV Tower in a rocky area. Applied Sciences (Basel), 11 (12). pp. 1-14. ISSN 2076-3417

Mohd Nasir, Nurfarahana and Jusoh, Ahmad and Harun, Mohd Razif and Nik Ibrahim, Nik Nor Liyana and Wan Ab. Karim Ghani, Wan Azlina (2021) Optimization of aquaculture wastewater bioremediation and harvesting utilizing response surface methodology (RSM). Chemical Engineering Transactions, 83. 151 - 156. ISSN 2283-9216

Mohd Noor, Mohd Amir Zunnasri and Sulaiman, Muhammad Firdaus and Wan Abdul Karim Ghani, Wan Azlina and Teh, Christopher Boon Sung (2021) Effects of harvesting Mucuna bracteata on the legume biomass and soil properties under mature oil palm. Pertanika Journal of Tropical Agricultural Science, 44 (1). pp. 139-155. ISSN 1511-3701; ESSN: 2231-8542

Mohd Nor, N. A. and Baharudin, B. T. Hang Tuah and Ghani, G. A. and Mohd Ariffin, Mohd Khairol Anuar and Leman, Zulkiflle and Ismail, Nazarul Abidin and A., Ginting (2021) Effect of increasing spindle speed at a constant chip load on cutting force behaviour of Hastelloy X. International Journal of Automotive and Mechanical Engineering, 18 (2). 8658 - 8667. ISSN 2229-8649; ESSN: 2180-1606

Mohd Nor, Nor Aznan and Kamarulzaman, N. F. and Zakaria, N. A. S. and Awang, N. (2021) Effect of spindle speed and feed per tooth in feed rate perspective on inconel HX cutting force. Journal of Mechanical Engineering, 18 (2). 65 - 76. ISSN 1823-5514; ESSN: 2550-164X

Mohd Nor, Shamsul Fahmi and Ab Kadir, Mohd Zainal Abidin and Mohd Ariffin, Azrul and Osman, Miszaina and Abd Rahman, Muhammad Syahmi and Mohd Zainuddin, Noorlina (2021) Issues and challenges in voltage uprating for sustainable power operation: a case study of a 132 kV transmission line system in Malaysia. Sustainability, 13 (19). art. no. 10776. pp. 1-23. ISSN 2071-1050

Mohd Nor, Shamsul Fahmi and Ab Kadir, Mohd Zainal Abidin and Mohd Ariffin, Azrul and Osman, Miszaina and Abd Rahman, Muhammad Syahmi and Mohd Zainuddin, Noorlina (2021) Systematic approaches and analyses on voltage uprating of 132 kV transmission lines: a case study in Malaysia. Applied Sciences, 11 (19). art. no. 9087. pp. 1-19. ISSN 2076-3417

Mohd Nurazzi, Norizan and M. Asyraf, M. R. and Sabaruddin, Fatimah Athiyah and Shamsudin, Siti Shazra Shazleen and Shafi, Ayu Rafiqah and Moklis, Muhammad Harussani and Kamarudin, S. H. and Razman, M. R. and M., Rahmah and Zainudin, Edi Syams and Ilyas, R. A. and Alias, Aisyah Humaira and M. N. F., Norrrahim and Abdullah, N. and Salit, Mohd Sapuan and A., Khalina (2021) A review on mechanical performance of hybrid natural fiber polymer composites for structural applications. Polymers, 13 (13). art. no. 2170. pp. 1-59. ISSN 2073-4360

Mohd Nurazzi, Norizan and Muhammad Rizal, Muhammad Asyraf and Khalina, Abdan and Abdullah, Norli and Sabaruddin, Fatimah Athiyah and Kamarudin, Siti Hasnah and Ahmad, So’bah and Mahat, Annie Maria and Lee, Chuan Li and Alias, Aisyah Humaira and Norrrahim, Mohd Nor Faiz and Rushdan, Ahmad Ilyas and Moklis, Muhammad Harussani and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan (2021) Fabrication, functionalization, and application of carbon nanotube-reinforced polymer composite: an overview. Polymers, 13 (7). art. no. 1047. pp. 1-45. ISSN 2073-4360

Mohd Radzi, Nur Fadzilah and Che Soh, Azura and Ishak, Asnor Juraiza and Hassan, Mohd Khair (2021) Feature extraction technique using Weighted Histogram Analysis Method (WHAM) for herbs discrimination based on gas chromatography signal. IEEE Access, 9. pp. 33336-33348. ISSN 2169-3536

Mohd Radzuan, Nurakma and Anuar, Mohd Shamsul and Mohd Tahir, Suraya (2021) The mixing of cohesive and flowable powder materials using a common laboratory powder mixer. Food Research, 5 (suppl.1). 19 - 24. ISSN 2550-2166

Mohd Rosidi, N. S. and Anuar, M. S. and Tahir, S. M. (2021) The elastic recovery, ejection work, strength and dissolution of instant coffee tablet containing croscarmellose sodium disintegrant. Food Research, 5 (suppl.1). 14 - 18. ISSN 2550-2166

Mohd Selva, Amran and Azis, Norhafiz and Shariffudin, Nor Shafiqin and Ab Kadir, Mohd Zainal Abidin and Jasni, Jasronita and Yahaya, Muhammad Sharil and Talib, Mohd Aizam (2021) Application of statistical distribution models to predict health index for condition-based management of transformers. Applied Sciences-Basel, 11 (6). art. no. 2728. pp. 1-20. ISSN 2076-3417

Mohd Thani, Nurfatimah and Mustapa Kamal, Siti Mazlina and Taip, Farah Saleena and Sulaiman, Alifdalino and Omar, Rozita (2021) Subcritical water hydrolysis for sugar recovery from bakery leftovers: kinetic and thermodynamic analysis. Biomass Conversion and Biorefinery, 13. pp. 1927-1935. ISSN 2190-6815; ESSN: 2190-6823

Mohd Thani, Nurfatimah and Mustapa Kamal, Siti Mazlina and Taip, Farah Saleena and Sulaiman, Alifdalino and Omar, Rozita (2021) Sugar rcovery from bakery leftovers through enzymatic hydrolysis: effect of process conditions and product characterization. Sains Malaysiana, 50 (10). 2977 - 2991. ISSN 0126-6039

Mohd Yusof, Siti Jamilah Hanim and Roslan, Ahmad Muhaimin and Zakaria, Mohd Rafein and Hassan, Mohd Ali and Shirai, Yoshihito (2021) Kinetics of xylan autohydrolysis during subcritical hydrothermal pretreatment of oil palm frond pressed fiber. BioEnergy Research, 1 (1). pp. 439-453. ISSN 1939-1234; ESSN: 1939-1242

Mohd Yusoff, Irwan Syah and Ismail, Muhammad Heikal and Abu Bakar, Elistina (2021) User experience: impact occupational factors on safety and health through ergonomic approach among older taxi drivers community in Malaysia. International Journal of Academic Research in Business and Social Sciences, 11 (11). 1245 - 1257. ISSN 2222-6990

Mohd Yusoff, N. and Lee, H. K. and Ng, E. K. and Abas, A. F. and Alresheedi, M. T. and Zainol Abidin, N. H. and Mahdi, M. A. (2021) Molybdenum trioxide decorated on tapered microfiber for mode-locked erbium-doped fiber laser. Journal of Materials Research and Technology, 14. 942 - 953. ISSN 2238-7854

Mohd Yusoff, Syamimi and Mohd Tahir, Suraya and Mohamed Ariff, Azmah Hanim and Supeni, Eris Elianddy and Anuar, Mohd Shamsul (2021) Fabrication and evaluation of density distribution in green bilayer iron powder compact. Materials and Manufacturing Processes, 36 (6). 660 - 667. ISSN 1042-6914; ESSN: 1532-2475

Mohd Yusree, Farhana Iylia Fatinee and Peter, Angela Paul and Mohd Nor, Mohd Zuhair and Show, Pau Loke and Mokhtar, Mohd Noriznan (2021) Latest advances in protein-recovery technologies from agricultural waste. Foods, 10 (11). art. no. 2748. pp. 1-20. ISSN 2304-8158

Mohmad Nasir, Hanisah and Aris, Ahmad Zaharin and Abdullah, Luqman Chuah and Ismail, Ismayadi (2021) Facile fabrication and characterization of kenaf core as natural biochar for the highly efficient removal of selected endocrine-disrupting compounds. Environmental Geochemistry and Health, 44 (3). pp. 993-1013. ISSN 0269-4042; ESSN: 1573-2983

Mohmad Nasir, Hanisah and Wee, Sze Yee and Aris, Ahmad Zaharin and Abdullah, Luqman Chuah and Ismail, Ismayadi (2021) Processing of natural fibre and method improvement for removal of endocrine-disrupting compounds. Chemosphere, 291. art. no. 132726. pp. 1-14. ISSN 0045-6535; ESSN: 1879-1298

Moklis, Muhammad Harussani and Salit, Mohd Sapuan and A. H. M., Firdaus and El-Badry, Yaser A. and Hussein, Enas E. and El-Bahy, Zeinhom M. (2021) Determination of the tensile properties and biodegradability of cornstarch-based biopolymers plasticized with sorbitol and glycerol. Polymers, 13 (21). pp. 1-12. ISSN 2073-4360

Motlagh, Shiva Rezaei and Elgharbawy, Amal A. and Khezri, Ramin and Harun, Razif and Awang Biak, Dayang Radiah and Hussain, Siti Aslina (2021) Ionic liquid method for the extraction of lipid from microalgae biomass: a review. Biomass Conversion and Biorefinery. pp. 1-23. ISSN 2190-6815; ESSN: 2190-6823

Motlagh, Shiva Rezaei and Harun, Razif and Awang Biak, Dayang Radiah and Hussain, Siti Aslina and Omar, Rozita and Khezri, Ramin and Elgharbawy, Amal A. (2021) Ionic liquid-based microwave-assisted extraction of lipid and eicosapentaenoic acid from Nannochloropsis oceanica biomass: experimental optimization approach. Journal of Applied Phycology, 33 (4). pp. 2015-2029. ISSN 0921-8971; ESSN: 1573-5176

Msebawi, Muntadher Sabah and Leman, Zulkiflle and Shamsudin, Shazarel and Mohd Tahir, Suraya and Jaafar, Che Nor Aiza and Mohamed Ariff, Azmah Hanim and Zahari, Nur Ismarrubie and Rady, Mohammed H. (2021) The effects of CuO and SiO2 on aluminum AA6061 hybrid nanocomposite as reinforcements: a concise review. Coatings, 11 (8). art. no. 972. pp. 1-20. ISSN 2079-6412

Mu, Luo and Zulkefli, Zamir Aimaduddin and Abdul Jalil, Nawal Aswan and Putra, Azma and Othman, Muhammad Nur and Raja Ahmad, Raja Mohd Kamil (2021) Experimental investigation of an acoustic metamamaterial barrier design composedof a square prism within a hexagon recess. ASEAN Engineering Journal, 11 (3). 57 - 70. ISSN 2229-127X

Muammar Rozilan, Danial Mirza and Hanafi, Marsyita and Ali, Roslizah and Razak, Mohd Adib and Cui, Hairu (2021) The efficacy of deep learning algorithm in classifying chilli plant growth stages. Advances in Agricultural and Food Research Journal, 2 (2). Jan-16. ISSN 2735-1084

Mudhafar, Mustafa and Zainol, Ismail and Alsailawi, H. A. and Jaafar, C. N. Aiza (2021) Synthesis and characterization of fish scales of hydroxyapatite/collagen-silver nanoparticles composites for the applications of bone filler. Journal of the Korean Ceramic Society, 59 (2). pp. 229-239. ISSN 2662-4702; ESSN: 2234-0491

Mudhafar, Mustafa and Zainol, Ismail and Jaafar, Che Nor Aiza and H. A., Alsailawi and Desa, Shakinaz (2021) A review study on synthesis methods of AgNanoparticles, considering antibacterial property and cytotoxicity. International Journal of Drug Delivery Technology, 11 (2). 635 - 648. ISSN 0975-4415

Mudri, Nurul Huda and Abdullah, Luqman Chuah and Min, Min Aung and Awang Biak, Dayang Radiah and Tajau, Rida (2021) Structural and rheological properties of nonedible vegetable oil-based resin. Polymers, 13 (15). art. no. 2490. pp. 1-18. ISSN 2073-4360

Muhadi, Nur 'Atirah and Abdullah, Ahmad Fikri and Bejo, Siti Khairunniza and Mahadi @ Othman, Muhammad Razif and Mijic, Ana (2021) Deep learning semantic segmentation for water level estimation using surveillance camera. Applied Sciences-Basel, 11 (20). pp. 1-26. ISSN 2076-3417

Muhamad Ng, Sabrina Ng and Idrus, Syazwani and Ahsan, Amimul and Tuan Mohd Marzuki, Tuan Nurfarhana and Mahat, Siti Baizura (2021) Treatment of wastewater from a food and beverage industry using conventional wastewater treatment integrated with membrane bioreactor system : a pilot scale case study. Membranes, 11 (6). art. no. 456. pp. 1-17. ISSN 2077-0375

Mukhtar Nasidi, Nuraddeen and Wayayok, Aimrun and Abdullah, Ahmad Fikri and Mohd Kassim, Muhamad Saufi (2021) Dynamics of potential precipitation under climate change scenarios at Cameron highlands, Malaysia. SN Applied Sciences, 3. art. no. 334. pp. 1-17. ISSN 2523-3971

Mukri, Ahmad Kamal and Tan, Jie Hong and Mohd Tahir, Suraya and Anuar, Mohd Shamsul and Mohd Yusoff, Syamimi (2021) Compaction behaviour of mannitol-cocoa powder mixtures and their resulting tablet strength and disintegration characteristics. Food Research, 5 (suppl.1). 182 - 187. ISSN 2550-2166

Munther, Munther Numan and Hashim, Fazirulhisyam and Abdul Latiff, Nurul Adilah and Alezabi, Kamal Ali and Jiun, Terng Liew (2021) Scalable and secure SDN based ethernet architecture by suppressing broadcast traffic. Egyptian Informatics Journal, 23 (1). art. no. 2113. pp. 113-126. ISSN 1110-8665; ESSN: 2090-4754

Muruga, Miiraa and Arumugam, Veknesh and Ismail, Muhammad Heikal (2021) Bio-compost behaviour as soil additive by food waste pretreatment on the growth of Abelmoschus esculentus L.: a systematic review. Pertanika Journal of Tropical Agricultural Science, 44 (4). pp. 825-844. ISSN 1511-3701; ESSN: 2231-8542

Musa, Mohammed Ali and Idrus, Syazwani (2021) Physical and biological treatment technologies of slaughterhouse wastewater: a review. Sustainability, 13 (9). art. no. 4656. pp. 1-20. ISSN 2071-1050

Mustaffa, Mas Rina and Khalid, Fatimah and C. Doraisamy, Shyamala and Al-Rababah, Khaleel and de Pina Júnior, Luís Filipe (2021) Hybrid discrete wavelet transform and texture analysis methods for feature extraction and classification of breast dynamic thermogram sequences. Malaysian Journal of Computer Science, 29 (spec.2). 116 - 131. ISSN 0127-9084

Mustapa Kamal, Siti Mazlina and Sulaiman, Alifdalino and Md. Hazmi, Nurul Ashikin (2021) Effect of High-Pressure Processing (HPP) on composition, lactose and microstructure of goat milk. Food Research, 5 (suppl.1). 107 - 113. ISSN 2550-2166

Muthu Kumar, T. Senthil and Chandrasekar, M. and Senthilkumar, K. and Ilyas, R. A. and Salit, Mohd Sapuan and Hariram, N. and Rajulu, A. Varada and Rajini, N. and Siengchin, Suchart (2021) Characterization, thermal and antimicrobial properties of hybrid cellulose nanocomposite films with in-situ generated copper nanoparticles in tamarindus indica nut powder. Journal of Polymers and the Environment, 29. 1134 - 1142. ISSN 1566-2543; ESSN: 1572-8900

Nadeem, Gohar and Safiee, Nor Azizi and Abu Bakar, Nabilah and Abd Karim, Izian and Mohd Nasir, Noor Azline (2021) Finite element analysis of proposed self-locking joint for modular steel structures. Applied Sciences, 11 (19). art. no. 9277. pp. 1-22. ISSN 2076-3417

Najeeb, Jawayria and Akram, Sadia and Mumtaz, Muhammad Waseem and Muhammad Danish and Ahmad Irfan and Touqeer, Tooba and Rashid, Umer and Wan Ab Karim Ghani, Wan Azlina and Shean, Thomas Yaw Choong (2021) Nanobiocatalysts for biodiesel synthesis through transesterification—a review. Catalysts, 11 (2). art. no. 171. pp. 1-40. ISSN 2073-4344

Najeeb, Muhammad Imran and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Muhammad Amir, Siti Madiha and Safri, Syafiqah Nur Azrie and Jawaid, Mohammad and Shari, Mohamad Rabaie (2021) Low velocity impact analysis of pineapple leaf fiber (PALF) hybrid composites. Polymers, 13 (18). art. no. 3194. pp. 1-18. ISSN 2073-4360

Nasidi, Nuraddeen M. and Abdullah, Ahmad F. and Shanono, Nura J. and Wayayok, Aimrun and M. Kassim, Muhamad S. (2021) Spatial variability of soil erodibility in response to different agricultural land use at highland farms. Basrah Journal of Agricultural Sciences, 34 (1 spec.). 41 - 53. ISSN 2520-0860

Nasri, Nik Nasiruddin and Samsu Baharuddin, Azhari and Mat Nawi, Nazmi and Mat Lazim, Siti Saripa Rabiah (2021) Determination of tensile properties for twisted fibre bundles of oil palm empty fruit bunch at different diameters. Basrah Journal of Agricultural Sciences, 34 (spec.1). 149 - 156. ISSN 1814-5868; ESSN: 2520-0860

Naveen, Jesuarockiam and Jawaid, Mohammad and Kheng, Lim Goh and Reddy, Degalhal Mallikarjuna and Muthukumar, Chandrasekar and Loganathan, Tamil Moli and Reshwanth, Koduri Naga Ganapathy Lakshmi (2021) Advancement in graphene-based materials and their nacre inspired composites for armour applications—a review. Nanomaterials, 11 (5). art. no. 1239. pp. 1-17. ISSN 2079-4991

Nawi, Mohd N. and Berhanuddin, Dilla Duryha and Mahdi, Mohd Adzir and Yeop Majlis, Burhanuddin and De La Rue, Richard M. and Md Zain, Ahmad Rifqi (2021) Performance reduction and discrepancies between supported and suspended 1D photonic-crystal/photonic-wire with medium extended microcavity length. Journal of Nanophotonics, 15 (3). art. no. 036013. pp. 1-5. ISSN 1934-2608

Nayak, Suhas Yeshwant and Shenoy, Satish and Hameed Sultan, Mohamed Thariq and Kini, Chandrakant R. and Seth, Aashna and Prabhu, Shrinivasa and Safri, Syafiqah Nur Azrie (2021) Effect of CNT-based resin modification on the mechanical properties of polymer composites. Frontiers in Materials, 7. art. no. 609010. pp. 1-35. ISSN 2296-8016

Nejati, Faranak and Abd Ghani, Abdul Azim and Ng, Keng Yap and Jafaar, Azmi (2021) Handling state space explosion in component-based software verification: a review. IEEE Access, 9. 77526 - 77544. ISSN 2169-3536

Nfawa, Sadeq R. and Abu Talib, Abd Rahim and Basri, Adi Azriff and Masuri, Siti Ujila (2021) Novel use of MgO nanoparticle additive for enhancing the thermal conductivity of CuO/water nanofluid. Case Studies in Thermal Engineering, 27. art. no. 101279. pp. 1-15. ISSN 2214-157X

Ng, E. K. and Lau, K. Y. and Lee, H. K. and Mohd Yusoff, N. and Sarmani, A. R. and Omar, M. F. and Mahdi, M. A. (2021) L-band femtosecond fiber laser based on reduced graphene oxide polymer composite saturable absorber. Optical Materials Express, 11 (1). 59 - 72. ISSN 2159-3930

Ng, Kok Siew and Phan, Anh N. and Lacovidou, Eleni and Wan Ab Karim Ghani, Wan Azlina (2021) Techno-economic assessment of a novel integrated system of mechanical-biological treatment and valorisation of residual municipal solid waste into hydrogen: a case study in the UK. Journal of Cleaner Production, 298 (14). pp. 1-16. ISSN 0959-6526

Ngah, A. Rahmad and Salman, Suhad D. and Leman, Zulkiflle and Salit, Mohd Sapuan and Alkbir, Munir Faraj Almbrouk and Januddi, Fatihhi (2021) Effects of drilling parameters on delamination of kenaf-glass fibre reinforced unsaturated polyester composites. Journal of Industrial Textiles, 51 (2 suppl.). 3057S-3076S. ISSN 1528-0837; ESSN: 1530-8057

Nikpour, Soheil and Hejazi, Farzad and Jaafar, Mohd Saleh (2021) Development of divergent fluid wall damper for steel-framed structures subjected to dynamic load. Journal of Earthquake Engineering, 25 (7). 1337 - 1357. ISSN 1363-2469; ESSN: 1559-808X

Noor Azmi, Aiman Nabilah and Bejo, Siti Khairunniza and Jahari, Mahirah and Muharram, Farrah Melissa and Yule, Ian J. (2021) Identification of a suitable machine learning model for detection of asymptomatic Ganoderma boninense infection in oil palm seedlings using hyperspectral data. Applied Sciences, 11 (24). art. no. 11798. pp. 1-17. ISSN 2076-3417

Noor Azmi, Aiman Nabilah and Jahari, Mahirah and Yule, Ian J. and Bejo, Siti Khairani and Muharam, Farrah Melissa (2021) Differences between healthy and Ganoderma boninense infected oil palm seedlings using spectral reflectance of young leaf data. Basrah Journal of Agricultural Sciences, 34 (spec.1). 171 - 179. ISSN 2520-0860; ESSN: 1814-5868

Nordin, Norhazirah and Romzi, Nur Alia Syafiqah and Manaf, Yanty Noorzianna and Mohamed Amin Tawakkal, Intan Syafinaz and Ariffin, Siti Hajar and Othman, Siti Hajar and Yusof, Yus Aniza (2021) Characterization of active sweet potato-based films containing thymol at different varieties: VitAto and Anggun. Food Packaging and Shelf Life, 30. art. no. 100750. 1- 10. ISSN 2214-2894

Norizan, M. Nurazzi and Muhammad Rizal, M. Asyraf and M., Rayung and M. N., F. Norrrahim and S., S. Shazleen and M. S., A. Rani and Shafi, Ayu Rafiqah and Alias, Aisyah Humaira and M. H., M. Radzi and Sabaruddin, F. A. and R., A. Ilyas and Zainudin, E.dy Syams and Abdan, Khalina (2021) Thermogravimetric analysis properties of cellulosic natural fiber polymer composites: a review on influence of chemical treatments. Polymers, 13 (16). art. no. 2710. pp. 1-33. ISSN 2073-4360

Norizan, Mohd Shahkhirat and Wayayok, Aimrun and Abdullah, Ahmad Fikri and Mahadi, Muhammad Razif and Abd Karim, Yahya (2021) Spatial variation of water holding capacity as an evidence for the needs of precision irrigation. Water, 13 (16). art. no. 2208. pp. 1-13. ISSN 2073-4441

Nudri, Nadly Aizat and Wan Abdul Karim Ghani, Wan Azlina and Bachmann, Robert Thomas and Baharudin, B. T. Hang Tuah and Ng, Denny K. S. and Md Said, Mohamad Syazarudin (2021) Co-combustion of oil palm trunk biocoal/sub-bituminous coal fuel blends. Energy Conversion and Management, 10. art. no. 100072. pp. 1-10. ISSN 0196-8904

Nurazzi, N. M. and Sabaruddin, F. A. and Harussani, M. M. and Kamarudin, S. H. and Rayung, M. and Asyraf, M. R. M. and Aisyah, H. A. and Norrrahim, M. N. F. and Ilyas, R. A. and Abdullah, N. and Zainudin, E. S. and Sapuan, S. M. and Khalina, A. Khalina (2021) Mechanical performance and applications of CNTs reinforced polymer composites—a review. Nanomaterials, 11 (9). art. no. 2186. pp. 1-25. ISSN 2079-4991

Omar, Mohd Asnawi and Baharudin, B. T. Hang Tuah and Sulaiman, S. and Ismail, Mohd Idris Shah and Omar, Mohd Afian (2021) Characterisation of elemental analysis, carbon sulphur analysis and impact test of stent manufacturing using medical grade ASTM F75 cobalt chromium (CoCrMo) by selective laser melting (SLM) technology. Advances in Materials and Processing Technologies, 7 (2). 200 - 215. ISSN 2374-068X; ESSN: 2374-0698

Omar, Nur Alia Sheh and Yap, Wing Fen and Ramli, Irmawati and Sadrolhosseini, Amir Reza and Abdullah, Jaafar and Yusof, Nor Azah and Mustapha Kamil, Yasmin and Mahdi, Mohd Adzir (2021) An optical sensor for dengue envelope proteins using Polyamidoamine Dendrimer biopolymer-based nanocomposite thin film: enhanced sensitivity, selectivity, and recovery studies. Polymers, 13 (5). art. no. 762. pp. 1-14. ISSN 2073-4360

Omran, Abdoulhdi A. Borhana and Mohammed, Abdulrahman A. B. A. and S., M. Sapuan and R., A. Ilyas and M. R., M. Asyraf and Seyed Saeid, Rahimian Koloor and Petrů, Michal (2021) Micro- and nanocellulose in polymer composite materials: a review. Polymers, 13 (2). art. no. 231. pp. 1-35. ISSN 2073-4360

Othman, Siti Hajar and Abdullah, Nur Athirah and Nordin, Norhazirah and Abdul Karim Shah, Nor Nadiah and Mohd Nor, Mohd Zuhair and Md Yunos, Khairul Faezah (2021) Shelf life extension of Saba banana: effect of preparation, vacuum packaging, and storage temperature. Food Packaging and Shelf Life, 28. pp. 1-7. ISSN 2214-2894

Othman, Siti Hajar and Nordin, Norhazirah and Azman, Nur Ayuni Aziera and Mohamed Amin Tawakkal, Intan Syafinaz and Kadir Basha, Roseliza (2021) Effects of nanocellulose fiber and thymol on mechanical, thermal, and barrier properties of corn starch films. International Journal of Biological Macromolecules, 183. 1352 - 1361. ISSN 0141-8130; ESSN: 1879-0003

Othman, Siti Hajar and Othman, Nur Fitrah Liyana and Ahmad Shapi’i, Ruzanna and Ariffin, Siti Hajar and Md. Yunos, Khairul Faezah (2021) Corn starch/chitosan nanoparticles/thymol bio-nanocomposite films for potential food packaging applications. Polymers, 13 (3). pp. 1-19. ISSN 2073-4360

Othman, Siti Hajar and Wane, Bilguisse Mamadou and Nordin, Norhazirah and Noor Hasnan, Noor Zafira and A. Talib, Rosnita and Karyadi, Joko Nugroho Wahyu (2021) Physical, mechanical, and water vapor barrier properties of starch/cellulose nanofiber/thymol bionanocomposite films. Polymers, 13 (23). art. no. 4060. pp. 1-16. ISSN 2073-4360

Pang, W. S. and Shee, Yu Gang and Abd. Rahman, Faidz and Adikan, Faisal Rafiq Mahamd and Mahdi, Mohd Adzir (2021) Enhanced sensitivity temperature sensing based on second order Brillouin slow light. Optik, 228. art. no. 166146. pp. 1-6. ISSN 0030-4026; ESSN: 1618-1336

Pei, Sze Lew and Nik Ibrahim, Nik Nor Liyana and Kamarudin, Suryani and M Thamrin, Norashikin and Misnan, Mohamad Farid (2021) Optimization of bokashi composting process using effective microorganisms-1 in smart composting bin. Sensors, 21 (8). art. no. 2847. pp. 1-15. ISSN 1424-8220

Permal, Navinesshani and Osman, Miszaina and Mohd Ariffin, Azrul and Ab Kadir, Mohd Zainal Abidin (2021) Effect of non-homogeneous soil characteristics on substation grounding-grid performances: a review. Applied Sciences (Basel), 11 (16). pp. 1-17. ISSN 2076-3417

Permal, Navinesshani and Osman, Miszaina and Mohd Ariffin, Azrul and Boopalan, Navaamsini and Ab Kadir, Mohd Zainal Abidin (2021) Optimization of substation grounding grid design for horizontal and vertical multilayer and uniform soil condition using Simulated Annealing method. PLoS One, 16 (9). art. no. e0256298. pp. 1-16. ISSN 1932-6203

Permal, Navinesshani and Osman, Miszaina and Mohd Ariffin, Azrul and Kadir, Zainal (2021) The impact of substation grounding grid design parameters in non-homogenous soil to the grid safety threshold parameters. IEEE Access, 9. 37497 - 37509. ISSN ESSN: 2169-3536

Prapti, Dipika Roy and Mohamed Shariff, Abdul Rashid and Che Man, Hasfalina and Mohamed Ramli, Norulhuda and Perumal, Thinagaran and Mohamed Shariff (2021) Internet of Things IoT based aquaculture: an overview of IoT application on water quality monitoring. Reviews in Aquaculture, 14 (2). 979 - 992. ISSN 1753-5131

R., Sivasubramanian and C., Aravind Vaithilingam and S. S., Indira and Paiman, Suriati and Misron, Norhisam and Abubakar, Shamsu (2021) A review on photovoltaic and nanogenerator hybrid system. Materials Today Energy, 20. art. no. 100772. pp. 1-17. ISSN 2468-6069

R. A., Ilyas and M. Y., M. Zuhri and Norrrahim, Mohd Nor Faiz and Mohamad Misenan, Muhammad Syukri and Jenol, Mohd Azwan and Samsudin, Sani Amril and Nurazzi, N. M. and Asyraf, M. R. M. and Supian, A. B. M. and Bangar, Sneh Punia and Nadlene, R. and Sharma, Shubham and A. Borhana Omran, Abdoulhdi (2021) Natural fiber-reinforced polycaprolactone green and hybrid biocomposites for various advanced applications. Polymers, 14 (1). art. no. 182. pp. 1-28. ISSN 2073-4360

R. Koloor, S. S. and Karimzadeharani, A. and Abdullah, M. R. and Petrů, M. and Yidris, N. and Sapuan, S. M. and Tamin, M. N. (2021) Linear-nonlinear stiffness responses of carbon fiber-reinforced polymer composite materials and structures: a numerical study. Polymers, 13 (3). art. no. 344. pp. 1-22. ISSN 2073-4360

Raad Mayoof Hajiyat, Zahraa and Ismail, Alyani and Sali, Aduwati and Hamidon, Mohd. Nizar (2021) Design and analysis of helical antenna for short-range ultra-high-speed THz wireless applications. Optik, 243. art. no. 167232. pp. 1-12. ISSN 0030-4026

Rabani Hashim, Mohd Khairul and Abdul Majid, Mohd Shukry and Mohd Jamir, Mohd Ridzuan and Kasim, Farizul Hafiz and Hameed Sultan, Mohamed Thariq (2021) The effect of stacking sequence and ply orientation on the mechanical properties of pineapple leaf fibre PALF/carbon hybrid laminate composites. Polymers, 13 (3). art. no. 455. Jan-24. ISSN 2073-4360

Rabby, Md Insiat Islam and Masuri, Siti Ujila and Samsul Kamal, Ahmad Syakir Fariz and Leman, Zulkiflle and Hairuddin, Abdul Aziz and Abdul Aziz, Nuraini (2021) Flow characteristics of disk bypass Pipeline Inspection Gauge (PIG) in natural gas pipelines using computational fluid dynamics. CFD Letters, 13 (4). pp. 11-37. ISSN 2180-1363

Rahamaddulla, Syed Radzi and Leman, Zulkiflle and Baharudin, B. T. Hang Tuah and Ahmad, Siti Azfanizam (2021) Conceptualizing smart manufacturing readiness-maturity model for Small and Medium Enterprise (SME) in Malaysia. Sustainability, 13 (17). art. no. 9793. pp. 1-18. ISSN 2071-1050

Raheemah, Saddam Hussein and Fadheel, Kareem Idan and Hassan, Qais Hussein and Mohammed Aned, Ashham and Turki Al-Taie, Alaa Abdulazeez and Kadhim Sharaf, Hussein (2021) Numerical analysis of the crack inspections using hybrid approach for the application the circular cantilever rods. Pertanika Journal of Science & Technology, 29 (2). pp. 1109-1117. ISSN 0128-7680; ESSN: 2231-8526

Raja Shahruzzaman, Raja Mohamad Hafriz and Ishak, Nor Shafizah and Arifin, Nor Anisa and Ali, Salmiaton and Yunus, Robiah and Yap, Taufiq Yun Hin and Shamsuddin, Abdul Halim (2021) Effect of Ni/Malaysian dolomite catalyst synthesis technique on deoxygenation reaction activity of waste cooking oil. Renewable Energy, 178. 128 - 143. ISSN 0960-1481

Rajendran High Impact Research Laboratory, Faculty of Innovation, Gowthamraj and Vaithilingam, Chockalingam Aravind and Misron, Norhisam and Naidu, Kanendra and Ahmed, Md Rishad (2021) Voltage oriented controller based vienna rectifier for electric vehicle charging stations. IEEE Access, 9. 50798 - 50809. ISSN 2169-3536

Ramlee, Nor Azlina and Jawaid, Mohammad and Yamani, Shaikh Abdul Karim and Zainudin, Edi Syams and Alamery, Salman (2021) Effect of surface treatment on mechanical, physical and morphological properties of oil palm/bagasse fiber reinforced phenolic hybrid composites for wall thermal insulation application. Construction and Building Materials, 276. art. no. 122239. pp. 1-10. ISSN 0950-0618

Ramli, A. M. A. and Harun, A. Nahar and Mohd Nawi, M. N. and Haron, N. A. (2021) Systematic review on the attributes of resident satisfaction measurement in the facility management context. Journal of Advanced Research in Business and Management Studies, 21 (1). 27 - 39. ISSN 2462-1935

Razali, Mohamad Omar Syafiq and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri (2021) Antimicrobial activity, physical, mechanical and barrier properties of sugar palm based nanocellulose/starch biocomposite films incorporated with cinnamon essential oil. Journal of Materials Research and Technology-JMR&T, 11. 144 - 157. ISSN 2238-7854

Razali, Muhammad Faiz and Narayanan, Sangitha and Md. Hazmi, Nurul Ashikin and Abdul Karim Shah, Nor Nadiah and Mustapa Kamal, Siti Mazlina and Mohd Fauzi, Noor Akhmazillah and Sulaiman, Alifdalino (2021) Minimal processing for goat milk preservation: effect of high-pressure processing on its quality. Journal of Food Processing and Preservation, 45 (7). art. no. e15590. ISSN 1745-4549

Riza, Muhammad Arif and Go, Yun Ii and Maier, Robert R. J. and Harun, Sulaiman Wadi and Ahmad Anas, Siti Barirah (2021) Characterization of hysteresis free, low-temperature hydrothermally synthesized zinc oxide for enhanced humidity sensing. Sensors International, 2. art. no. 100106. pp. 1-8. ISSN 2666-3511

Riza, Muhammad Arif and Go, Yun Ii and Maier, Robert R. J. and Harun, Sulaiman Wadi and Ahmad Anas, Siti Barirah (2021) Enhanced fiber mounting and etching technique for optimized optical power transmission at critical cladding thickness for fiber-sensing application. Laser Physics, 31 (12). pp. 1-12. ISSN 1054-660X; ESSN: 1555-6611

Riza, Muhammad Arif and Go, Yun Ii and Maier, Robert R. J. and Harun, Sulaiman Wadi and Ahmad Anas, Siti Barirah (2021) Hygroscopicity enhancement of low temperature hydrothermally synthesized zinc oxide nanostructure with heterocyclic organic compound for humidity sensitization. Sensors and Actuators B: Chemical, 345. pp. 1-12. ISSN 0925-4005

Riza, Muhammad Arif and Yun, Ii Go and Maier, Robert R. J. and Harun, Sulaiman Wadi and Ahmad Anas, Siti Barirah (2021) Optical properties enhancement with multilayer coating technique of additive-enhanced zinc oxide nanostructure for fiber Bragg grating humidity sensor. Wiley, 64 (1). 184 - 189. ISSN 0895-2477; ESSN: 1098-2760

Rosdi, Fatin Naimah and Mohd Nor, Mohd Zuhair and Wan Mohamad, Wan Anwar Fahmi and Wan Mokhtar, Wan Mohd Fadli (2021) Physical properties of kelulut honey emulsions with different oil types and emulsifier concentrations. Journal of Agrobiotechnology, 12 (1s). 92 - 100. ISSN 2180-1983

Roslan, Jumardi and Boniface, Beatricia Amelia and Hay, Chye Ling and Lee, Jau Shya and Akanda, Md. Jahurul Haque and Saallah, Suryani and Mohd Nor, Mohd Zuhair (2021) Effect of heat treatment on physicochemical properties of Bambangan (Mangifera pajang) fruit juice. Transactions on Science and Technology, 8 (3-3). 545 - 551. ISSN 2289-8786

Roslan, Jumardi and Mustapa Kamal, Siti Mazlina and Md. Yunos, Khairul Faezah and Abdullah, Norhafizah (2021) Fractionation of tilapia by-product protein hydrolysate using multilayer configuration of ultrafiltration membrane. Processes, 9 (3). art. no. 446. pp. 1-15. ISSN 2227-9717

Roslan, Nadirah and Yaacob, Mohammad Effendy and Jamaludin, Diyana and Hashimoto, Yoshio and Othman, M. H. and Noor Iskandar, Abdurrahman and Mohd Ariffin, Mohd Ruzaimi and Ibrahim, Mohd Hafiz and Mailan, J. and Jamaluddin, A. H. and Mail, Mohd Fazly and B. S. N., Aliah and Lu, L. (2021) Dye-Sensitized Solar Cell (DSSC): effects on light quality, microclimate, and growth of Orthosiphon stamineus in tropical climatic condition. Agronomy-Basel, 11 (4). pp. 1-39. ISSN 2073-4395

Rozman, Azri Shahir and Hashim, Norhashila and Maringgal, Bernard and Abdan, Khalina (2021) Optimisation of stingless bee honey nanoemulsions using response surface methodology. Foods, 10 (9). art. no. 2133. pp. 1-14. ISSN 2304-8158

Rubinsin, Nowilin James and Wan Daud, Wan Ramli and Kamarudin, Siti Kartom and Masdar, Mohd Shahbudin and Rosli, Masli Irwan and Samsatli, Sheila and Tapia, John Frederick D. and Wan Ab Karim Ghani, Wan Azlina and Hasan, Azhan and Lim, Kean Long (2021) Modelling and optimisation of oil palm biomass value chains and the environment–food–energy–water nexus in peninsular Malaysia. Biomass & Bioenergy, 144. art. no. 105912. pp. 1-16. ISSN 0961-9534

S. Zainal, S. M. Iqbal and Hejazi, Farzad and Abd. Aziz, Farah Nora Aznieta and Jaafar, Mohd Saleh (2021) The synergistic effects of different types of hybridized synthetic fibers on concrete post-crack residual strength. KSCE Journal of Civil Engineering, 26 (1). 131 - 142. ISSN 1226-7988; ESSN: 1976-3808

S. Zainal Abidin, Sheikh Mohd Iqbal and Hejazi, Farzad and Muhammad Rashid, Raizal Saifulnaz (2021) Enhancing the performance of knee beam–column joint using hybrid fibers reinforced concrete. International Journal of Concrete Structures and Materials, 15. art. no. 20. pp. 1-28. ISSN 1976-0485; ESSN: 2234-1315

Saad, Ahmed Hassan and Nahazanan, Haslinda and Md Yusoff, Zainuddin and Mustafa, Muskhazli and Elseknidy, Mohamed Hamdy and Mohammed Angham, Ali Mohammed (2021) Evaluating Biosedimentation on Strength Improvement for Acidic Soil. Applied Sciences (Basel), 11 (22). pp. 1-16. ISSN 2076-3417

Saadon, Syamimi (2021) Organic Rankine Cycle (ORC) as waste heat recovery system for micro-cogeneration: a preliminary study. Journal of Physics: Conference Series, 2053. art. no. 012019. pp. 1-07. ISSN 1742-6596; ESSN: 1742-6588

Saallah, Suryani and Roslan, Jumardi and Julius, Flavian Sheryl and Saallah, Sharinee and Mohamad Razali, Umi Hartina and Pindi, Wolyna and Sulaiman, Mohd Rosni and Pa’ee, Khairul Faizal and Mustapa Kamal, Siti Mazlina (2021) Comparative study of the yield and physicochemical properties of collagen from Sea Cucumber (Holothuria scabra), Obtained through Dialysis and the Ultrafiltration Membrane. Molecules, 26 (9). art. no. 2564. pp. 1-11. ISSN 1420-3049

Sabo, Aliyu and Abdul Wahab, Noor Izzri and Acikgoz, Hakan and Othman, Mohammad Lutfi and Mohd Jaffar, Mai Zurwatul Ahlam and Beiranvand, Hamzeh (2021) Application of a neuro-fuzzy controller for single machine infinite bus power system to damp low-frequency oscillations. Transactions of the Institute of Measurement and Control, 43 (16). 3633 - 3646. ISSN 0142-3312; ESSN: 1477-0369

Sabo, Aliyu and Abdul Wahab, Noor Izzri and Othman, Mohammad Lutfi and Mohd Jaffar, Mai Zurwatul Ahlam and Acikgoz, Hakan and Nafisi, Hamed and Shahinzadeh, Hossein (2021) Artificial intelligence-based power system stabilizers for frequency stability enhancement in multi-machine power systems. IEEE Access, 9. 166095 - 166116. ISSN 2169-3536

Sadrolhosseini, Amir Reza and Habibiasr, Mina and Soleimani, Hassan and Hamidon, Mohd Nizar and Yap, Wing Fen and Lim, H. N. (2021) Surface plasmon resonance sensor to detect n-hexane in palm kernel oil using polypyrrole nanoparticles reduced graphene oxide layer. Journal of Sensors, 2021. art. no. 8813801. pp. 1-13. ISSN 1687-725X; ESSN: 1687-7268

Saheed, Sanusi and Mugahed Amran, Y. H. and El-Zeadani, Mohamed and A. Aziz, Farah Nora and Fediuk, Roman and Alyousef, Rayed and Alabduljabbar, Hisham (2021) Structural behavior of out-of-plane loaded precast lightweight EPS-foam concrete C-shaped slabs. Journal of Building Engineering, 33. pp. 1-21. ISSN 2352-7102

Saiful Bahari, Nurul Iman and Muharam, Farrah Melissa and Zulkafli, Zed and Mazlan, Norida and Husin, Nor Azura (2021) Modified linear scaling and quantile mapping mean bias correction of MODIS land surface temperature for surface air temperature estimation for the lowland areas of Peninsular Malaysia. Remote Sensing, 13 (13). art. no. 2589. pp. 1-28. ISSN 2072-4292

Salim, Nur Ashida and Jasni, Jasronita and Mohamad, Hasmaini and Mat Yasin, Zuhaila (2021) Transformer health index prediction using feedforward neural network according to scoring and ranking method. International Journal of Advanced Technology and Engineering Exploration, 8 (75). 292 - 303. ISSN 2394-5443; ESSN: 2394-7454

Salisu, Abdullahi and Abdullah, Ahmad Fikri and Wayayok, Aimrun and Kamal, Md. Rowshon (2021) Discharge characterization and variability determination along shorter sections of soaker hose pipe for soil column experiment. Basrah Journal of Agricultural Sciences, 34 (spec.1). 92 - 99. ISSN 1814-5868; ESSN: 2520-0860

Salleh, Mohd Badrul and Mohd Suhadis, Nurulasikin and Varatharajoo, Renuganth (2021) An active force controlled of small CMG-based satellite. Aircraft Engineering and Aerospace Technology, 93 (7). 1183 - 1192. ISSN 1748-8842; ESSN: 1758-4213

Salman Dawood, Sarmad Dawood and Harmin, Mohammad Yazdi and Mohd Harithuddin, Ahmad Salahuddin and Chia, Chen Ciang and Mohd Rafie, Azmin Shakrine (2021) Computational study of mass reduction of a conceptual microsatellite structural subassembly utilizing metal perforations. Journal of Aeronautics, Astronautics and Aviation, Series A, 53 (1). 57 - 66. ISSN 1990-7710

Salman Dawood, Sarmad Dawood and Mohd Harithuddin, Ahmad Salahuddin and Harmin, Mohammad Yazdi (2021) Modal analysis of conceptual microsatellite design employing perforated structural components for mass reduction. Aerospace, 9 (1). art. no. 23. pp. 1-30. ISSN 2226-4310

Salmi, S. and Abdul Aziz, Nuraini and Abdul Aziz, H. and Masuri, Siti Ujila (2021) Thermal process, technical review and performance improvement for operational of ultra-supercritical coal fired power plant. Solid State Technology, 64 (2). 4404 - 4417. ISSN 0038-111X

Samat, Fadzliana and Singh, Mandeep Jit and Sali, Aduwati and Maniam, P.M.Kalai Vaanan (2021) Observation of site diversity gain dependency on separation distance using an attenuation-dependent logarithmic model in a tropical region. IEEE Access, 9. 33994 - 34006. ISSN 2169-3536

Samsudin, Salmi and Abdul Aziz, Nuraini and Hairuddin, Abdul Aziz and Masuri, Siti Ujila (2021) Developing sub-bituminous coal sintering ratio for predicting coal ash slagging factors. International Journal of Technology, 12 (4). 791 - 501. ISSN 2086-9614

Samsudin, Salmi and Abdul Aziz, Nuraini and Hairuddin, Abdul Aziz and Masuri, Siti Ujila (2021) A study on bituminous coal base acid ratio to the slagging factor at large scale boiler. International Journal of Heat and Technology, 39 (3). 833 - 840. ISSN 0392-8764

Sanmuham, Vikneswari and Hameed Sultan, Mohamed Thariq and Ali, Mohd Radzi and Shamsuri, Ahmad Adlie and Md Shah, Ain Umaira and Safri, Syafiqah Nur Azrie and Basri, Adi Azriff (2021) Effect of silver nanopowder on mechanical, thermal and antimicrobial properties of kenaf/HDPE composites. Polymers, 13 (22). pp. 1-14. ISSN 2073-4360

Sathongpan, Parichart and Shamsudin, Rosnah and Varith, Jaturapatr and Abd Rahman, Nur Farhana (2021) Comparison of the physical properties between Malaysian and Thai rice. Advances in Agricultural and Food Research Journal, 2 (1). pp. 1-14. ISSN 2735-1084

Shaari, Aznizan and Yunus, Robiah and Ab.Raman, Ismail and Omar, Dzolkhifli and Shahar, Mohd Khadri and Awang Biak, Dayang Radiah and Kania, Dina and Aulia, Akmal (2021) Field efficacy of palm oil-based nanoemulsion insecticides against Aedes aegypti in Malaysia. Acta Tropica, 224. art. no. 106107. pp. 1-12. ISSN 0001-706X; ESSN: 1873-6254

Shaari, Nurfarhana and Mnemoi, Farizade and Shamsudin, Rosnah and Mohd Nor, Mohd Zuhair and Hashim, Norhashila (2021) Effects of different skin processing conditions of Japanese sweet potato powder (Ipomoea batatas) on physicochemical properties. Advances in Agricultural and Food Research Journal, 4 (1). pp. 1-8. ISSN 2735-1084

Shaari, S.R. and Othman, Mohammad Lutfi and Veerasamy, Veerapandiyan and Dahlan, Nofri Yenita and Ramachandran, Rajeswari and Chik, Mohd Hanafiah and Hizam, Hashim and Zainal Anuar, Suhafizudin (2021) Optimal ice thermal energy storage charging operation of chiller plant during off-peak hours. Journal of Mechanical Engineering, 10 (spec.1). 159 - 170. ISSN 1823-5514; ESSN: 2550-164X

Shaari, SR and Othman, M. L. and H., Hizam and N. Y., Dahlan and Chik, Mohd Hanafiah and Yahaya, Mohamad Suhaimi and Abu Bakar, Hamzah and Zainal Anuar, Suhafizudin and Amir, Zulhelmi (2021) Analysis the energy saving of Chiller Plant (CHIP) daily operation by using optimal projected capacity of Ice Thermal Energy Storage (ITES). Journal of Physics: Conference Series, 1874. art. no. 012025. pp. 1-12. ISSN 17426588; ESSN: 17426596

Shafi, Ayu Rafiqah and Abdan, Khalina and Harmaen, Ahmad Saffian and Mohamed Amin Tawakkal, Intan Syafinaz and Zaman, Khairul and Asim, Mohammad and Norizan, Mohd Nurazzi and Lee, Ching Hao (2021) A review on properties and application of bio-based poly(Butylene Succinate). Polymers, 13 (9). art. no. 1436. pp. 1-28. ISSN 2073-4360

Shah Faisal Khan, Sherwani and Salit, Mohd Sapuan and Leman, Zulkiflle and Zainudin, Edi Syams and Abdan, Khalina (2021) Physical, mechanical and morphological properties of sugar palm fiber reinforced polylactic acid composites. Fibers and Polymers, 22 (11). 3095 - 3105. ISSN 1229-9197; ESSN: 1875-0052

Shah Faisal Khan, Sherwani and Zainudin, Edi Syams and Salit, Mohd Sapuan and Leman, Zulkiflle and Abdan, Khalina (2021) Physical, mechanical, and morphological properties of treated sugar palm/glass reinforced poly(lactic acid) hybrid composites. Polymers, 13 (21). art. no. 3620. pp. 1-25. ISSN 2073-4360

Shahar, Farah Syazwani and Hameed Sultan, Mohamed Thariq and Safri, Syafiqah Nur Azrie and Jawaid, Mohammad and Abu Talib, Abd. Rahim and Basri, Adi Azriff and Md Shah, Ain Umaira (2021) Fatigue and impact properties of 3D printed PLA reinforced with kenaf particles. Journal of Materials Research and Technology-JMR&T, 16. 461 - 470. ISSN 2214-0697; ESSN: 2238-7854

Shaharuddin, Mohd Izwan and Salit, M. Sapuan and Mohamed Yusoff, M. Zuhri and Abdul Rahman, Mohamed (2021) Thermal stability and dynamic mechanical analysis of benzoylation treated sugar palm/kenaf fiber reinforced polypropylene hybrid composites. Polymers, 13 (17). art. no. 2961. pp. 1-18. ISSN 2073-4360

Shaharuddin, Mohd Izwan and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Muhamed, A. R. (2021) Effect of benzoyl treatment on the performance of sugar palm/kenaf fiber-reinforced polypropylene hybrid composites. Textile Research Journal, 92 (5-6). pp. 1-16. ISSN 0040-5175; ESSN: 1746-7748

Shalghum, Khaled M. and Noordin, Nor Kamariah and Sali, Aduwati and Hashim, Fazirulhisyam (2021) Network calculus-based latency for time-triggered traffic under Flexible Window-Overlapping Scheduling (FWOS) in a Time-Sensitive Network (TSN). Applied Sciences, 11 (9). art. no. 3896. pp. 1-27. ISSN 2076-3417

Shamsudin, N.H and Shafie, Suhaidi and Ab Kadir, Mohd Zainal Abidin and Sulaiman, Yusran and Sadrolhosseini, Amir Reza and Abdullah, Abdul Halim (2021) Impact of polyvinylpyrrolidone and quantity of silver nitrate on silver nanoparticles sizing via solvothermal method for dye-sensitized solar cells. Surface and Interface Analysis, 54 (2). 109 - 116. ISSN 0142-2421; ESSN: 1096-9918

Shamsudin, Rosnah and Ariffin, Siti Hajar and Zainol @ Abdullah, Wan Nor Zanariah and Azmi, Nazatul Shima and Abdul Halim, Arinah Adila (2021) Modelling the kinetics of color and texture changes of Dabai (Canarium odontophyllum Miq.) during blanching. Agronomy, 11 (11). art. no. 2185. pp. 1-13. ISSN 2073-4395

Shamsudin, Rosnah and Azhari, Nor A. A. and Kasim, Susilawati and Rahmat, Muhammad A. S. (2021) Macro and micro-nutrients of Azolla pinnata as a soilless growth media. Basrah Journal of Agricultural Sciences, 1 (spec. 1). 180 - 189. ISSN 1814-5868; ESSN: 2520-0860

Shamsudin, Rosnah and Azhari, Nor Aziatul Azidah and Kasim, Susilawati and Rahmat, Muhammad Ammar Syaheed (2021) Effects of formulation of soilless growth media from Azolla pinnata sp on water absorption, water loss, and water retention. Advances in Agricultural and Food Research Journal, 3 (1). pp. 1-11. ISSN 2735-1084

Shariffuddin, Nor Shafiqin and Azis, Norhafiz and Mohd Selva, Amran and Yahaya, Muhammad Sharil and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Talib, Mohd Aizam (2021) Failure rate estimation for transformer population based on health index through Markov model approach. Pertanika Journal of Science & Technology, 29 (4). pp. 3029-3042. ISSN 0128-7680; EISSN: 2231-8526

Shashikant, Veena and Mohamed Shariff, Abdul Rashid and Wayayok, Aimrun and Kamal, Md Rowshon and Lee, Yang Ping and Takeuchi, Wataru (2021) Utilizing TVDI and NDWI to classify severity of agricultural drought in Chuping, Malaysia. Agronomy, 11 (6). art. no. 1243. pp. 1-18. ISSN 2073-4395

Shashikant, Veena and Mohamed Shariff, Abdul Rashid and Wayayok, Aimrun and Kamal, Md. Rowshon and Yang, Ping Lee and Takeuchi, Wataru (2021) Comparison of field and SAR-derived descriptors in the retrieval of soil moisture from oil palm crops using PALSAR-2. Remote Sensing, 13 (23). pp. 1-17. ISSN 2072-4292

Sheh Omar, Nur Alia and Yap, Wing Fen and Ramli, Irmawati and Mohd Azmi, Umi Zulaikha and Hashim, Hazwani Suhaila and Abdullah, Jaafar and Mahdi, Mohd Adzir (2021) Cellulose and vanadium plasmonic sensor to measure Ni2+ ions. Applied Sciences-Basel, 11 (7). art. no. 2963. pp. 1-16. ISSN 2076-3417

Shinde, Avinash and Siva, I. and Munde, Yashwant and Deore, Vishal and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Mustapha, Faizal (2021) Testing of silicon rubber/montmorillonite nanocomposite for mechanical and tribological performance. Nanomaterials, 11 (11). art. no. 3050. pp. 1-15. ISSN 2079-4991

Shukri, Muhammad Safwan and Azis, Norhafiz and Jasni, Jasronita and Yunus, Robiah and Yaakub, Zaini (2021) Statistical analysis of AC dielectric dtrength for palm oil under the influence of moisture. Pertanika Journal of Science & Technology, 29 (1). pp. 77-94. ISSN 0128-7680; ESSN: 2231-8526

Shukri, Muhammad Safwan and Azis, Norhafiz and Jasni, Jasronita and Yunus, Robiah and Yaakub, Zaini (2021) Statistical analysis of AC dielectric strength for palm oil under the influence of moisture. Pertanika Journal of Science & Technology, 29 (1). pp. 77-94. ISSN 0128-7680; ESSN: 2231-8526

Sim, Bernard Maxmillan and Tang, Sai Hong and Alrifaey, Moath and Jong, Edwin Nyon Tchan (2021) Analyzing the effects of heat treatment on SMAW duplex stainless steel weld overlays. Materials, 15 (5). art. no. 1833. pp. 1-13. ISSN 1996-1944

Singh, Balbir and Yidris, Noorfaizal and Basri, Adi Azriff and Pai B, Raghuvir and Ahmad, Kamarul Arifin (2021) Study of mosquito aerodynamics for imitation as a small robot 2 and flight in a low-density environment. Micromachines, 12 (5). art. no. 511. pp. 1-28. ISSN 2072-666X

Sirajudeen, Abdurrasheed Olayinka and Law, Teik Hua and Wong, Shaw Voon and Jakarni, Fauzan Mohd and Ng, Choy Peng (2021) The sources of the Kuznets relationship between the road deaths to road injuries ratio and economic growth. Journal of Safety Research, 78. 262 - 269. ISSN 0022-4375

Sohany, Mouluda and Mohamed Amin Tawakkal, Intan Syafinaz and Ariffin, Siti Hajar and Abdul Karim Shah, Nor Nadiah and Yusof, Yus Aniza (2021) Characterization of Anthocyanin associated purple sweet potato starch and peel-based pH indicator films. Foods, 10 (9). art. no. 2005. pp. 1-27. ISSN 2304-8158

Soltani, Soroush and Khanian, Nasrin and Choong, Thomas Shean Yaw and Asim, Nilofar and Yue, Zhao (2021) Microwave-assisted hydrothermal synthesis of sulfonated TiO2-GO core–shell solid spheres as heterogeneous esterification mesoporous catalyst for biodiesel production. Energy Conversion and Management, 238. art. no. 114165. pp. 1-10. ISSN 0196-8904

Subri, Nur Nida Syamimi and Ibrahim, Nur Athirah and Abdullah, Luqman Chuah and Kamaruzaman, Sazlinda and Faujan, Nur Hana and Md. Jamil, Siti Nurul Ain (2021) Synthesis of an ethylenediamine-modified hypercrosslinked polymer and its preliminary study for antipyrine and pamabrom extraction. Malaysian Journal of Chemistry, 23 (4). pp. 1-17. ISSN 2550-1658

Sujinda, Narathip and Varith, Jaturapatr and Shamsudin, Rosnah and Jaturonglumlert, Somkiat and Chamnan, Saranyapak (2021) Development of a closed-loop control system for microwave freeze-drying of carrot slices using a dynamic microwave logic control. Journal of Food Engineering, 302. art. no. 110559. pp. 1-9. ISSN 0260-8774

Sulaiman, Shamsuddin and Aldeehani, Ahmaad Kadmouse and Alhajji, Mohammad Sh I A M I and Abdul Aziz, Faieza (2021) Development of integrated supply chain system in manufacturing industry. Journal of Computational Methods in Sciences and Engineering, 21 (3). 599 - 611. ISSN 1472-7978

Sulaiman, Syazana and Azis, Raba'ah Syahidah and Ismail, Ismayadi and Che Man, Hasfalina and Muhammad Yusof, Khairul Faezah and Abba, Muhammad Umar and Katibi, Kamil Kayode (2021) Adsorptive removal of copper (II) Ions from aqueous solution using a magnetite nano-adsorbent from mill scale waste: synthesis, characterization, adsorption and kinetic modelling studies. Nanoscale Research Letters, 16. art. no. 168. pp. 1-17. ISSN 1931-7573; ESSN: 1556-276X

Syazwan Ramli, Alif Syamim and Tengku Kamalden, Tengku Fadilah and Sharir, Raihana and Harith, Hazreen Haizi and Hanafi, Marsyita and Gasibat, Qais and Samsudin, Shamsulariffin (2021) Mechanical interaction within badminton forehand shot technique: a review paper. International Journal of Kinesiology and Sports Science, 9 (3). 28 - 34. ISSN 2202-946X

Syed Hasan, Sharifah Nur Munirah and Mohd Kusin, Faradiella and Nik Daud, Nik Norsyahariati and Saadon, Muhammad Anwar and Mohamat-Yusuff, Ferdaus and Ash’aari, Zulfa Hanan (2021) Characterization of gold mining waste for carbon sequestration and utilization as supplementary cementitious material. Processes, 9 (8). art. no. 1384. pp. 1-21. ISSN 2227-9717

Talebkhah, Marieh and Sali, Aduwati and Marjani, Mohsen and Gordan, Meisam and Hashim, Shaiful Jahari and Rokhani, Fakhrul Zaman (2021) IoT and big data applications in smart cities: recent advances, challenges, and critical issues. IEEE Access, 9. pp. 1-20. ISSN 2169-3536

Tan, Ai Ping and Hamid, Hussain and Law, Teik Hua and Jakarni, Fauzan and Wong, Shaw Voon (2021) Development of composite motorcycling safety index along urban roads in Malaysia. Journal of the Society of Automotive Engineers Malaysia, 5 (1). 117 - 136. ISSN 2600-8092; ESSN: 2550-2239

Tan, Jia Boh and Jamali, Nur Syakina and Tan, Wei En and Che Man, Hasfalina and Zainal Abidin, Zurina (2021) Techno-economic assessment of on-farm anaerobic digestion system using attached-biofilm reactor in the dairy industry. Sustainability, 13 (4). art. no. 2063. pp. 1-15. ISSN 1937-0695; ESSN: 2071-1050

Tanaay, Naci Arda and Okur, Onur and Duran, Osman and Yilmaz, Erkan and Turkumen, Mustafa and Mohamed Ariff, Azmah Hanim and Dele-Afolabi, Temitope Theophilus and Calin, Recep (2021) An investigation of production and properties of RHA reinforced hybrid composites by vacuum infiltration method. International Journal of Engineering Research and Development, 13 (2). 704 - 710. ISSN 2278-800X

Tantichukiad, Komsan and Yahya, Azmi and Mohd Mustafah, Anas and Harith, Hazreen Haizi and Mohd Rafie, Azmin Shakrine and Mat Su, Ahmad Suhaizi (2021) Computational studies on the effects of a central shaft and a guiding wall on the savonius hydrokinetic turbine performances. Advances in Agricultural and Food Research Journal (AAFRJ), 2. pp. 1-17. ISSN 2735-1084

Tarique, Jamal and Salit, Mohd Sapuan and Abdan, Khalina (2021) Effect of glycerol plasticizer loading on the physical, mechanical, thermal, and barrier properties of arrowroot (Maranta arundinacea) starch biopolymers. Scientific Reports, 11. art. no. 13900. pp. 1-17. ISSN 2045-2322

Tay, Chai Hua and Mazlan, Norkhairunnisa and Hameed Sultan, Mohamed Thariq and Abdan, Khalina and Lee, Ching Hao (2021) Mechanical performance of hybrid glass/kenaf epoxy composite filled with organomodified nanoclay. Journal of Materials Research and Technology, 15. 4415 - 4426. ISSN 2238-7854

Tie, Hieng Ong and Hamzah, Muhammad Hazwan and Che Man, Hasfalina (2021) Optimization of palm oil extraction from decanter cake using Soxhlet extraction and effects of microwaves pre-treatment on extraction yield and physicochemical properties of palm oil. Food Research, 5 (suppl.1). 25 - 32. ISSN 2550-2166

Tuan Mohd Marzuki, Tuan Nurfarhana and Idrus, Syazwani and Musa, Mohammed Ali and Abdul Wahab, Abdul Malek and Jamali, Nur Syakina and Che Man, Hasfalina and Muhamad Ng, Sabrina Ng (2021) Enhancement of bioreactor performance using acclimatised seed sludge in anaerobic treatment of chicken slaughterhouse wastewater: laboratory achievement, energy recovery, and its commercial-scale potential. Animals, 11 (11). art. no. 3313. pp. 1-19. ISSN 2076-2615

Veerasamy, Veerapandiyan and Abdul Wahab, Noor Izzri and Othman, Mohammad Lutfi and Padmanaban, Sanjeevikumar and Sekar, Kavaskar and Ramachandran, Rajeswari and Hizam, Hashim and Vinayagam, Arangarajan and Islam, Mohammad Zohrul (2021) LSTM recurrent neural network classifier for high impedance fault detection in solar PV integrated power system. IEEE Access, 9 (2021). 32672 - 32687. ISSN 2169-3536

W., P. Yee and M. Nor, M. Z. and M. Basri, M. S. and Roslan, J. (2021) Membrane-based clarification of banana juice: pre-treatment effect on the flux behaviour, fouling mechanism and juice quality attributes. Food Research, 5 (suppl. 1). 57 - 64. ISSN 2550-2166

Wahab, Mafa and Salit, Mohd Sapuan and Moklis, Muhammad Harussani and Mohamed Yusoff, Mohd Zuhri and A. A., Saleh (2021) Conceptual design of glass/renewable natural fibre-reinforced polymer hybrid composite motorcycle side cover. Journal of Renewable Materials, 9 (11). 1973 - 1989. ISSN 2164-6325; ESSN: 2164-6341

Wan Abdullah, Wan Syakirah and Osman, Miszaina and Ab Kadir, Mohd Zainal Abidin and Verayiah, Renuga and Ab Aziz, Nur Fadilah and Abdul Rasheed, Mohamed (2021) Techno-economics analysis of battery energy storage system (BESS) design for virtual power plant (VPP)-a case study in Malaysia. Journal of Energy Storage, 38. pp. 1-9. ISSN 2352-152X; ESSN: 2352-1538

Wan Osman, Wan Nur Aisyah and Mat Nawi, Normi Izati and Samsuri, Shafirah and Bilad, Muhammad Roil and Wibisono, Yusuf and Yáñez, Eduard Hernández and Md Saad, Juniza (2021) A review on recent progress in membrane distillation crystallization. ChemBioEng Reviews, 9 (1). pp. 93-109. ISSN 2196-9744

Wen, Dong and Cheng, Zihao and Li, Jingjing and Zheng, Xinxiang and Yao, Wang and Dong, Xianling and Saripan, M. Iqbal and Li, Xiaoli and Yin, Shimin and Zhou, Yanhong (2021) Classification of ERP signal from amnestic mild cognitive impairment with type 2 diabetes mellitus using single-scale multi-input convolution neural network. Journal of Neuroscience Methods, 363. art. no. 109353. pp. 1-12. ISSN 0165-0270

Wen, Dong and Li, Rou and Jiang, Mengmeng and Li, Jingjing and Liu, Yijun and Dong, Xianling and Saripan, M. Iqbal and Song, Haiqing and Han, Wei and Zhou, Yanhong (2021) Multi-dimensional conditional mutual information with application on the EEG signal analysis for spatial cognitive ability evaluation. Neural Networks, 148. 23 - 36. ISSN 0893-6080; ESSN: 1879-2782

Wen, Dong and Yao, Wang and Xu, Jian and Wang, Shaochang and Zhong, Yingzhu and Chen, Hongqian and Dong, Xianling and Saripan, M. Iqbal and Zhou, Yanhong (2021) Electronic science games used to enhance cognitive ability: opinion of design from personalization and adaptation. Frontiers in Aging Neuroscience, 13. art. no. 789547. pp. 1-5. ISSN 1663-4365

Wen, Hong Chua and Yaacob, Mohd Hanif and Tan, Chou Yong and Ong, Boon Hoong (2021) Chemical bath deposition of h-MoO3 on optical fibre as room-temperature ammonia gas sensor. Ceramics International, 47 (23). 32828 - 32836. ISSN 0272-8842; ESSN: 1873-3956

Wondi, Mohd Hafizz and Shamsudin, Rosnah and Yunus, Robiah and Baharudin, Mohd Shafril and Arnan, Muhammad Zaidy and Abdu Rahman, Amirul Faizi (2021) Physical and mechanical properties of sterilized oil palm fruits at different component. AMA-Agricultural Mechanization in Asia Africa and Latin America, 52 (3). 3985 - 3997. ISSN 0084-5841

Wong, Lih Jiun and H’ng, Paik San and Chuah, Luqman Abdullah and Mohamad Tahir, Paridah and Chin, Kit Ling (2021) Effect of chemical steeping on yields of glucose and xylose from dilute acid hydrolysis of extract from oil palm trunk. BioResources, 17 (1). 207 - 222. ISSN 1930-2126

Yaakob, Syamsuri and Mahmood, Rawa Muayad and Zan, Zuraidah and Mohd Rashidi, Che Beson and Mahmud, Azwan and Ahmad Anas, Siti Barirah (2021) Modulation index and phase imbalance of Dual-Sideband Optical Carrier Suppression (DSB-OCS) in optical millimeter-wave system. Photonics, 8 (5). art. no. 153. pp. 1-12. ISSN 2304-6732

Yaakub, Muhamad Faizal and Mohd Radzi, Mohd Amran and Azri, Maaspaliza and Mohd Noh, Faridah Hanim (2021) LCL filter design for grid-connected single-phase flyback microinverter: a step by step guide. International Journal of Power Electronics and Drive Systems, 12 (3). 1632 - 1643. ISSN 2088-8694

Yin, Mee Thang and Yunus, Robiah and Mokhtar, Mohd Noriznan and Appleton, David Ross and Asis, Ahmad Jaril and Pei, San Kong and Huey, Fang Teh and Ariffin, Abdul Azis (2021) Roles and principles of sterilisation process in palm oil mills. Pertanika Journal of Science & Technology, 29 (4). pp. 2705-2722. ISSN 0128-7680; ESSN: 2231-8526

Yuswan, Mohd Hafis and A. Jalil, Nurul Hanani and Mohamad, Haslina and Keso, Shamsidah and Mohamad, Nurhidayatul Asma and Tengku Md. Yusoff, Tengku Shahrul and Ismail, Nor Falahiah and Abdul Manaf, Yanty Noorzianna and Mohd Hashim, Amalia and Mohd Desa, Mohd Nasir and Yusof, Yus Aniza and Mustafa, Shuhaimi (2021) Hydroxyproline determination for initial detection of halal-critical food ingredients (gelatin and collagen). Food Chemistry, 337. art. no. 127762. pp. 1-7. ISSN 0308-8146; ESSN: 1873-7072

Zahoor, Furqan and Hussin, Fawnizu Azmadi and Khanday, Farooq Ahmad and Ahmad, Mohamad Radzi and Mohd Nawi, Illani and Chia, Yee Ooi and Rokhani, Fakhrul Zaman (2021) Carbon Nanotube Field Effect Transistor (CNTFET) and Resistive Random Access Memory (RRAM) based ternary combinational logic circuits. Electronics, 10 (1). art. no. 79. pp. 1-20. ISSN 2079-9292

Zainal, Norzahirah and Shamsudin, Rosnah (2021) Physical properties of different cultivar local glutinous rice (Susu and Siding) and commercial Thai cultivar. Advances in Agricultural and Food Research Journal, 2 (1). pp. 1-10. ISSN 2735-1084

Zentou, Hamid and Z. Abidin, Zurina and Yunus, Robiah and Awang Biak, Dayang Radiah and Issa, Mohammed Abdullah and Pudza, Musa Yahaya (2021) Modelling of mass transfer during pervaporation of ethanol/water mixture using polydimethylsiloxane membrane. Chemical Engineering Research and Design, 175. 320 - 329. ISSN 0263-8762

Zentou, Hamid and Zainal Abidin, Zurina and Yunus, Robiah and Awang Biak, Dayang Radiah and Issa, Mohammed Abdullah and Pudza, Musa Yahaya (2021) A new model of alcoholic fermentation under a byproduct inhibitory effect. ACS Omega, 6. 4137 - 4146. ISSN 2470-1343

Zhao, Yuanyuan and Rokhani, Fakhrul Zaman and Shariff Ghazali, Sazlina and Boon, How Chew (2021) Defining the concepts of a smart nursing home and its potential technology utilities that integrate medical services and are acceptable to stakeholders: a scoping review protocol. BMJ Open, 11 (2). art. no. 41452. pp. 1-17. ISSN 2044-6055

Zulkafli, Zed Diyana and Muharam, Farrah Melissa and Raffar, Nurfarhana and Jajarmizadeh, Amirparsa and Abdi, Mukhtar Jibril and Mohamed Rehan, Balqis and Khairudin, Nurulhuda (2021) Contrasting influences of seasonal and intra-seasonal hydroclimatic variabilities on the irrigated rice paddies of Northern Peninsular Malaysia for weather index insurance design. Sustainability, 13 (9). pp. 1-23. ISSN 2071-1050

Zulkefli, Norliyana Farzana and Wan Ab. Karim Ghani, Wan Azlina and Ali, Salmiaton and Asib, Norhayu and Chowmasundaram, Yamuna (2021) Development of bio-pesticides from bio-oil of oil palm biomass waste (palm kernel shell) against Metisa plana Walker bagworm (Lepidoptera: Psychidae). Food Research, 5 (suppl.1). 137 - 143. ISSN 2550-2166

Zulkifli, Nurazwin and Hashim, Norhashila and Harith, Hazreen Haizi and Mohamad Shukery, Mohamad Firdza and Onwude, Daniel Iroemeha and Sairi, Masniza (2021) Finite element modelling for predicting the puncture responses in papayas. Foods, 10 (2). pp. 1-11. ISSN 2304-8158

Zulkifly, Syazwan Syah and Hasan, Nor Halim and Baharudin, Mohd Rafee and Syed Ismail, Sharifah Norkhadijah and Mahadi, Muhammad Razif (2021) Safety knowledge-attitude-behaviour KAB among manufacturing workers in Malaysia: a proposed research of designing and developing an intervention module. Journal of Advanced Research in Business Marketing and Supply Chain Management, 5 (1). pp. 1-14. ISSN 2600-8327

Zulkornain, Muhammad Fikri and Shamsuddin, Abd Halim and Nomanbhay, Saifuddin and Md Saad, Juniza and Zhang, Ye Shui and Samsuri, Shafirah and Wan Ab Karim Ghani, Wan Azlina (2021) Microwave-assisted hydrothermal carbonization for solid biofuel application: a brief review. Carbon Capture Science & Technology, 1. art. no. 100014. pp. 1-14. ISSN 2772-6568

Book Section

M. A., Azmah Hanim (2021) Synthesis of macro porous ceramic materials. In: Advanced Functional Porous Materials: From Macro to Nano Scale Lengths. Springer, Switzerland, 17 - 42. ISBN 9783030853976

Conference or Workshop Item

Ibrahim, Abeer A. Z. and Hashim, Fazirulhisyam and Sali, Aduwati and Noordin, Nor K. and Fadul, Saber M. E. (2021) A modified genetic algorithm for controller placement problem in SDN distributed network. In: 2021 26th IEEE Asia-Pacific Conference on Communications (APCC), 11-13 Oct. 2021, Kuala Lumpur, Malaysia. (pp. 83-88).

Usman, I. H. and Nordin, N. K. and Omizegba, E. E. and Sali, A. and Rasid, M. F. A. and Hashim, F. (2021) Performance analyses of adaptive handover decision algorithm using spectrum aggregation in long term evolution - advanced network. In: 2021 26th IEEE Asia-Pacific Conference on Communications (APCC), 11-13 Oct. 2021, Kuala Lumpur, Malaysia. (pp. 292-297).

Thesis

Ab Halim, Haizum Hanim (2021) Smart energy meter with adaptive communication data transfer algorithm for electrical energy monitoring. Doctoral thesis, Universiti Putra Malaysia.

Abbas, Shahad Khudhair (2021) Optical signal enhancement using stimulated brillouin scattering. Masters thesis, Universiti Putra Malaysia.

Abdgalil, Ali Khalifa (2021) Graphene and graphene/carbon black composite-based counter electrodes for platinum-free dye-sensitized solar cell. Doctoral thesis, Universiti Putra Malaysia.

Abdul Aziz, Mohd Hamim (2021) Internet of things-based soil sensing platform for Ganoderma boninense infection detection in oil palm seedlings using machine learning. Doctoral thesis, Universiti Putra Malaysia.

Abdul Aziz, Nur Haziqah (2021) Improvement in dispersement and agglomeration properties for carbon nanotube ink. Masters thesis, Universiti Putra Malaysia.

Abdul Haris, Faranadia (2021) Improved criteria determination of an automated negative lightning return strokes characterisation using Brute-Force search algorithm. Doctoral thesis, Universiti Putra Malaysia.

Abdul Mutalib, Mohd Zurrayen (2021) Tool condition monitoring of friction drilling process using adaptive neuro-fuzzy inference system. Doctoral thesis, Universiti Putra Malaysia.

Abdul Raof, Nurliyana (2021) Characteristics of polyol ester as transformer insulating oil. Doctoral thesis, Universiti Putra Malaysia.

Abdulhameed, Abdullah Abdulhameed Gumaan (2021) Assembly and alignment of long carbon nanotube bridges using thickness-controlled airflow-assisted dielectrophoresis for sensor applications. Doctoral thesis, Universiti Putra Malaysia.

Abdulhussein, Mohanad Mohammed (2021) Multi-user beamforming, fairness and device-to-device channel state information sharing in downlink non-orthogonal multiple access systems. Doctoral thesis, Universiti Putra Malaysia.

Abdullah, Mohammad (2021) Removal of copper and iron by amidoxime modified poly (Acrylonitrile-g-microcrystalline cellulose). Doctoral thesis, Universiti Putra Malaysia.

Abdullah, Mohd Na'im (2021) Enhancing rice husk ash-based aluminosilicate fire retardant additive as a passive fire protection material. Doctoral thesis, Universiti Putra Malaysia.

Abdullah, Zalizawati (2021) Processing and control strategies for the improvement of spray-dried coconut milk quality. Doctoral thesis, Universiti Putra Malaysia.

Abdullahi, Lawal Abubakar (2021) Development of biochar from oil palm frond for palm oil mill effluent treatment. Doctoral thesis, Universiti Putra Malaysia.

Abdullahi, Salisu (2021) Development and performance of modified clay nanoporous pipe for subsurface irrigation. Doctoral thesis, Universiti Putra Malaysia.

Abed, Albuhamdan Sadeq Salman (2021) Heat transfer and turbulent nanofluid flow investigation over microscale backward-facing step. Doctoral thesis, Universiti Putra Malaysia.

Abu Raid, Fadi Imad Osman (2021) Online teleoperation of writing manipulator through graphics processing unit based accelerated stereo vision. Doctoral thesis, Universiti Putra Malaysia.

Abu Toat, Shamsainon (2021) Hydrolysis of cotton fabric from hospital waste for ethanol production using sub-critical water. Masters thesis, Universiti Putra Malaysia.

Ahmad Faris, Ahmad Fariduddin (2021) Aerodynamics effect of computational fluid dynamics approach on different propeller blade design subjected to origin position. Masters thesis, Universiti Putra Malaysia.

Al Jlibawi, Ali Hussein Humod (2021) Soft sensor modelling for optimization of distribution control system in oil refineries by applying hybrid data mining techniques. Doctoral thesis, Universiti Putra Malaysia.

Al-Khateeb, Mahmood Yahya Hasan (2021) Performance of retrofitted reinforced concrete beam with anchored carbon fiber reinforced polymer rods and concrete jacket under increasing repetitive bending. Doctoral thesis, UPM.

Al-Mekhlafi, Mohamed Abdulkarem Taher (2021) High-throughput and energy-efficient Contiki MAC layer scheme in IEEE 802.15.4 for structural health monitoring. Doctoral thesis, Universiti Putra Malaysia.

Al-Qahtani, Turki S A H (2021) Experimental and computational fluid dynamics investigation on the performance of leakage sensor model. Doctoral thesis, Universiti Putra Malaysia.

Aladwani, Habeeb A H R (2021) Design of an automatic transmission system to improve energy capture of vertical axis wind turbine. Doctoral thesis, Universiti Putra Malaysia.

Alazemi, Fahad KH A O H (2021) A comprehensive fuzzy decision-making method for determining optimum machining strategy in production line improvement. Doctoral thesis, Universiti Putra Malaysia.

Alazemi, Mohammad F F S (2021) Effect of rice husk ash addition on the physical properties of soda-lime-silica glass for building glass and window. Doctoral thesis, Universiti Putra Malaysia.

Alhajji, Mohammad Sh I A M I (2021) Effect of material modifier and vibration on mechanical and microstructure properties of aluminium LM6 composite casting. Doctoral thesis, Universiti Putra Malaysia.

Ali, Houma Abdusslam Ahmad (2021) Aquacrop and ensemble global climate models for rice production under climate change impact. Doctoral thesis, Universiti Putra Malaysia.

Ali, Suhaila (2021) Fire performance assessment of six Malaysian wood species for furniture applications. Doctoral thesis, Universiti Putra Malaysia.

Ali, Zuhura Juma (2021) Resource allocation techniques for downlink Non-Orthogonal Multiple Access-Based 5G wireless systems. Doctoral thesis, Universiti Putra Malaysia.

Aljermi, Almukhtar IB. A. (2021) Influence of heat treatment on microstructure, mechanical properties, and corrosion behaviour of LM6 reinforced with copper powder. Doctoral thesis, Universiti Putra Malaysia.

Almayas, Ali A A A (2021) Experimental and numerical investigation on solid propellant rocket motor performance. Doctoral thesis, Universiti Putra Malaysia.

Alrashidi, Ahmad M R N (2021) Plasma combustion technology for micro gas turbine using Kuwaiti sheep fat biodiesel. Doctoral thesis, Universiti Putra Malaysia.

Alsaeed, Adel S M A (2021) Training of thermoelectric generator maintenance using virtual reality in oil and gas industry. Doctoral thesis, Universiti Putra Malaysia.

Altalabani, Diyar Nasih Qader (2021) Development of rectangular rubber isolators for a tunnel-form structure subjected to seismic excitations. Doctoral thesis, Universiti Putra Malaysia.

Ashrafi, Negin (2021) Development of novel aluminum matrix composite reinforced with hybrid filler (Fe3O4-SiC) for enhancement of magnetic, thermal, corrosion and mechanical properties. Doctoral thesis, Universiti Putra Malaysia.

Azri, Norsahida (2021) Development of dolomite-supported copper catalysts for glycerol hydrogenolysis to 1,2-propanediol. Doctoral thesis, Universiti Putra Malaysia.

Baharudin, Elfarizanis (2021) Microwave absorber based on biocomposites derived from agricultural wastes with reinforcement of poly lactic acid. Doctoral thesis, Universiti Putra Malaysia.

Baitab, Danish Mahmood (2021) Aeroelastic flutter performance of shape memory alloy embedded 3D woven composite plate under subsonic flow. Doctoral thesis, Universiti Putra Malaysia.

Chan, Ying Nee (2021) Impact of aeroelastic tailoring on flutter performance of variable ribs’ orientation for different wing box model planforms. Masters thesis, Universiti Putra Malaysia.

Che Hashim, Izrahayu (2021) Machine-learning approach using thermal and synthetic aperture radar data for classification of oil palm trees with basal stem rot disease. Doctoral thesis, Universiti Putra Malaysia.

Farade, Rijavan (2021) Dielectric and thermal properties of natural ester green nanofluids based on cottonseed oil for transformer applications. Doctoral thesis, Universiti Putra Malaysia.

Fong, Wai Leng (2021) Influence of Bi₂O₃ content on thermal, structural and optical properties of bismuth tellurite glass-ceramics by controlled heat treatment for optical applications. Masters thesis, Universiti Putra Malaysia.

Ghazali, Anith Khairunnisa (2021) Regenerative braking model for electric vehicles with modified super-twisting sliding mode control. Doctoral thesis, Universiti Putra Malaysia.

Girei, Saad Hayatu (2021) Optical microfiber sensor coated with nanomaterials for ammonia sensing applications. Doctoral thesis, Universiti Putra Malaysia.

Goh, Jia Quan (2021) Oil palm maturity classifier using spectrometer and machine learning. Masters thesis, Universiti Putra Malaysia.

Hamid, Zentou (2021) Development of an integrated fermentation pervaporation model for bioethanol production. Doctoral thesis, Universiti Putra Malaysia.

Haron, Nor Azidawati (2021) Development of Malaysian river stability index by incorporating morphological assessment in normal flow conditions. Doctoral thesis, Universiti Putra Malaysia.

Hazmin, Mohd Haniff (2021) Semi-permanent expandable hydropower system for river applications in Malaysia. Doctoral thesis, UPM.

Ibrahim, Abeer Abdalla Zakaria (2021) Controller placement problem in the optimization of 5G based SDN and NFV architecture. Doctoral thesis, Universiti Putra Malaysia.

Ibrahim, Mohd Qadafie (2021) Development of infinite qualitative model framework for consumer product aesthetic design. Doctoral thesis, Universiti Putra Malaysia.

Ikenna, Odoemena Kenneth (2021) Assessment of treated wastewater irrigation using coconut fibre for spinach (Spinacia oleracea L.) vegetable plants. Masters thesis, Universiti Putra Malaysia.

Ishak, Nur Arnisah (2021) Optimization of tannin extraction from cavendish banana (Musa acuminata Colla) peel and production of its powder. Masters thesis, Universiti Putra Malaysia.

Isham, Nur Hazwani (2021) Buckling and post-buckling of steel box section using finite element method. Masters thesis, Universiti Putra Malaysia.

Islam, Rabby Mad Insiat (2021) Numerical simulation of flow characterizations of fluids around bypass pipeline inspection gauge. Masters thesis, Universiti Putra Malaysia.

Ismail, Haqi Khalid (2021) Efficient kerberos authentication scheme for cross-domain systems in industrial internet of things using ECC. Doctoral thesis, Universiti Putra Malaysia.

Ismail, Nazarul Abidin (2021) Artificial intelligence-based tool condition monitoring in robotic incremental sheet forming through vibration, tool wear and surface roughness analyses. Doctoral thesis, Universiti Putra Malaysia.

Kamal Azhar, Nisa Syakirah (2021) Development of fruit battery sensor with charging method for oil palm fruit ripeness detection. Masters thesis, Universiti Putra Malaysia.

Kamaruddin, Fatin Amirah (2021) Fabrication of strengthening treatment method for marine clay. Doctoral thesis, Universiti Putra Malaysia.

Kamaruddin, Zatil Hazrati (2021) Development and characterisation of Dioscorea hispida Dennst fibre-reinforced Dioscorea hispida Dennst starch biocomposite films. Doctoral thesis, Universiti Putra Malaysia.

Kamarudin, Nuruldiyanah (2021) Phenol formaldehyde resol resins with plant-based tannin for composite laminate applications. Doctoral thesis, Universiti Putra Malaysia.

Kamarudin, Saidatul Izyanie (2021) Highly efficient magnetic resonance coupling wireless power transfer for 5G applications. Doctoral thesis, Universiti Putra Malaysia.

Khairul Anuar, Norshafiqah (2021) Methane production from anaerobic co-digestion of sewage sludge and decanter cake. Masters thesis, Universiti Putra Malaysia.

Khalid, Nurul Izzah (2021) Development of electrolyzed water sanitation program for SME frozen meat patty industry. Doctoral thesis, Universiti Putra Malaysia.

Khan, Sherwani Shah Faisal (2021) Development and characterization of sugar palm [Arenga pinnata (Wurmb.) Merr]/glass fiber reinforced poly (lactic acid) hybrid composites for motorcycle components. Doctoral thesis, Universiti Putra Malaysia.

Khodamoradi, Vahid (2021) Energy-efficient base station transmission design for green 5G massive MIMO and hybrid networks. Doctoral thesis, Universiti Putra Malaysia.

Kok, Zhi Hong (2021) Machine learning classification of macronutrient levels in oil palm trees with Landsat-8 imagery. Masters thesis, Universiti Putra Malaysia.

Loganathan, Tamil Moli (2021) Characterization of Cyrtostachys renda / kenaf (Hibiscus cannabinus L.) / multi-walled carbon nanotubes / bio-phenolic hybrid composites for aircraft tray tables. Doctoral thesis, Universiti Putra Malaysia.

Lua, Hwee Ying (2021) Effects of batter - coated methylcellulose on potato substrate during the frying process. Masters thesis, Universiti Putra Malaysia.

Mahat, Siti Baizura (2021) Performance of two-stage dynamic anaerobic membrane bioreactor for treating high strength food processing wastewater. Doctoral thesis, Universiti Putra Malaysia.

Maniam, P. M. Kalai Vaanan (2021) Characterization of signal transmission over integrated satellite and Li-Fi network for high-speed rail environment in tropical region. Doctoral thesis, Universiti Putra Malaysia.

Mat Nasir, Radiah (2021) Interrelation between soil compaction and field performances of different machinery at MADA’s rice field, Kedah, Malaysia. Masters thesis, Universiti Putra Malaysia.

Mazlan, Ali Ahmad (2021) Low velocity impact analysis of pineapple leaf/kenaf fibre-reinforced vinyl ester hybrid composites for structural applications. Masters thesis, Universiti Putra Malaysia.

Md Saleh, Nur Izzati (2021) Recovery of peptide from Nannochloropsis gaditana protein hydrolysate through two-stage ultrafiltration membrane. Doctoral thesis, Universiti Putra Malaysia.

Md. Ali, Sham Firdaus (2021) Detection and evaluation of Caesium-137 point source using silicone photomultiplier sensor. Doctoral thesis, Universiti Putra Malaysia.

Mfarej, Sumaya Dhari Awad (2021) End-to-end DVB-S2X system design with deep learning-based channel estimation over satellite fading channels. Doctoral thesis, Universiti Putra Malaysia.

Mohamad, Azizah (2021) Effects of pulsed electric field on Escherichia coli ATCC 8739 inactivation, metal migration and physicochemical properties of goat milk. Masters thesis, Universiti Putra Malaysia.

Mohamad Aziz, Nur Atiqah (2021) Transesterification of palm-based methyl ester and trimethylolpropane for trimethylolpropane esters production using microwave-assisted heating. Doctoral thesis, Universiti Putra Malaysia.

Mohamad Mazlan, Mazween (2021) Characterization of oyster mushroom-soy protein meat analog using single-screw extruder with extrusion variables. Masters thesis, Universiti Putra Malaysia.

Mohamad Radzi, Nur Fadzilah (2021) Herbs recognition system based on physiochemical properties using weighted histogram and multiple discriminant analysis methods. Doctoral thesis, Universiti Putra Malaysia.

Mohamed, Abdelraziq Sharif Sayed (2021) Multi-sensor fusion and ground vehicle-assisted localization approach for unmanned aerial vehicle. Masters thesis, Universiti Putra Malaysia.

Mohamed Noor, Norramlee (2021) Development of multi-cylinder linear machine powertrain system for electric vehicle. Doctoral thesis, Universiti Putra Malaysia.

Mohammed, Abdulmohaimen Imad (2021) Strength recovery and healing efficiency of cement-based materials containing autogenous healing binders and autonomous encapsulated healing agents. Doctoral thesis, Universiti Putra Malaysia.

Mohammed, Abdulnasser Ahmed (2021) Time division multiple access-based scheduling algorithm for quality of service enhancement in IEEE 802.11s wireless mesh networks. Doctoral thesis, Universiti Putra Malaysia.

Mohd Baroyi, Syahrul Anis Hazwani (2021) Effects of conventional, diffusion and modern moisture removal methods on quality of stingless bee (Heterotrigona itama Cockerell) honey. Masters thesis, Universiti Putra Malaysia.

Mohd Saiah, Ramadhaney (2021) Development of temperature measurement method for gas turbine cooling application. Doctoral thesis, Universiti Putra Malaysia.

Mohd Supian, Nur Amira (2021) Effects of aqueous ozone pasteurization on S. typhimurium inactivation and qualitative attributes of chokanan mango (Mangifera indica L.) fruit juice. Masters thesis, Universiti Putra Malaysia.

Mok, Li Suet (2021) Block based low complexity iterative QR precoder structure for Massive MIMO. Masters thesis, Universiti Putra Malaysia.

Moklis, Muhammad Harussani (2021) Development and characterization of polypropylene waste-derived char filled sugar palm [Arenga pinnata (Wurmb) Merr.] starch biopolymer composite briquettes. Masters thesis, Universiti Putra Malaysia.

Muhammad Rizal, Muhammad Asyraf (2021) Creep test facility development and creep analysis of braced composite cross arms in 132 kV transmission tower. Doctoral thesis, Universiti Putra Malaysia.

Naharuddin, Noor Zirwatul Ahlam (2021) Gold nanoparticles saturable absorber for ultrashort pulse generation in fibre lasers. Doctoral thesis, Universiti Putra Malaysia.

Ng, Eng Khoon (2021) Black phosphorus/polydimethylsiloxane coated microfiber saturable absorber for ultrashort pulse fiber laser. Doctoral thesis, Universiti Putra Malaysia.

Noor Azmi, Aiman Nabilah (2021) Early detection of Ganoderma boninense in oil palm seedlings using hyperspectral images and machine learning classification techniques. Masters thesis, Universiti Putra Malaysia.

Nor Mohamed, Sity Ainy (2021) Effect of different stress ratio on fatigue crack propagation of rice husk polypropylene composites under constant amplitude loading. Doctoral thesis, Universiti Putra Malaysia.

Omar, Mohd Asnawi (2021) Stent strength improvement through the utilization of selective laser melting technology. Doctoral thesis, Universiti Putra Malaysia.

Oussama, Messadi (2021) Two-round relay selection and joint massive MIMO transmission technique to enhance wireless information and power transfer. Doctoral thesis, Universiti Putra Malaysia.

Raidah, Rami Abdulhakeem Hasan Ba (2021) Correlation between lean six sigma implementation, adoption readiness and SME performance in Malaysian manufacturing firms. Doctoral thesis, Universiti Putra Malaysia.

Razali, Noorshazlin (2021) Low velocity impact characterisations of flax/kenaf/glass fibre hybrid composites. Doctoral thesis, Universiti Putra Malaysia.

Rosdi, Anis Nurdhiani (2021) Sub-critical water extraction of fucoidan from brown algae Padina sp. Doctoral thesis, Universiti Putra Malaysia.

Roslan, Nadirah (2021) Field performance evaluation on dye-sensitized solar cell mini greenhouse in the tropics. Masters thesis, Universiti Putra Malaysia.

Ruslan, Rashidah (2021) Development of a machine vision system for weedy rice seed identification. Doctoral thesis, Universiti Putra Malaysia.

Saber, Almohamedabas Shihab Ezzuldin M (2021) Development of glycidyl methacrylate grafted irradiated fibers and poly(acrylonitrile-co-acrylic acid) microparticles adsorbents for the removal of p-nitrophenol. Doctoral thesis, Universiti Putra Malaysia.

Sairy, Nur Aqilah (2021) Effect of nanofillers in jute/carbon hybrid reinforced polylactic acid composite. Masters thesis, Universiti Putra Malaysia.

Sani, Ojogbane Success (2021) Building extraction for 3D city modelling using infused airborne LiDAR and high-resolution aerial photograph. Doctoral thesis, Universiti Putra Malaysia.

Shaari, Nurfarhana (2021) Characterization of Malaysian sweet potato ‘Anggun 1’ variety at different storage temperatures and processing conditions. Masters thesis, Universiti Putra Malaysia.

Shahar, Farah Syazwani (2021) Investigation of characteristics of Kenaf/PLA filament for ankle foot orthosis using fused deposition modelling. Doctoral thesis, Universiti Putra Malaysia.

Sharaf, Sharaf Hussein Kadhim (2021) Design and development of 123kV 13L Cross-arm with bracing structures for application in transmission towers. Doctoral thesis, Universiti Putra Malaysia.

Shwan, Pshtiwan Mohammad Sharif (2021) Novel heat exchanger for cold air intake on spark ignition engine performance. Doctoral thesis, Universiti Putra Malaysia.

Soliman, Khasib Isam Adnan (2021) Strength and compressibility behavior of soil treated with palm oil fuel ash-based geopolymer. Masters thesis, Universiti Putra Malaysia.

Sujinda, Narathip (2021) Development of closed-loop control system for microwave freeze-drying of carrot slices. Doctoral thesis, Universiti Putra Malaysia.

Suliano, Salami Bahariah (2021) Integration of Triz, morphological chart, and pugh matrix for redesigning ergonomics of car interior for the mobility-impaired. Doctoral thesis, Universiti Putra Malaysia.

Suliman, Mohamed Saad Abdelgadir (2021) Determining penetration limit of central distributed generation topology in radial distribution networks. Masters thesis, Universiti Putra Malaysia.

Taray, Insha Ahmed (2021) A computational fluid dynamics analysis of oscillating bluefin tuna foil propulsion. Masters thesis, Universiti Putra Malaysia.

Tuseef, Asghar Muhammad (2021) Processing of coconut sap into syrup and granular sugar using different evaporation techniques for economical production. Doctoral thesis, Universiti Putra Malaysia.

Umar, Abba Mohammed (2021) Boron removal from scheduled waste leachate using hybrid adsorption-membrane system augmented with TiO₂ nanoparticles. Doctoral thesis, Universiti Putra Malaysia.

Veerapandiyan, Veerasamy (2021) Recurrent neural network approach for stability analysis and special protection scheme of power systems with distributed generation. Doctoral thesis, Universiti Putra Malaysia.

Vincent Eddy, Christine Jamie (2021) Separation and recovery of palm mesocarp and nuts using the newly-developed batch drupe dehusker machine. Doctoral thesis, Universiti Putra Malaysia.

Wahid, Zaliha (2021) Mechanical characterization of polymer parts produced via multi-jet printing and fused deposition modelling. Doctoral thesis, Universiti Putra Malaysia.

Zainal A'bidin, Farahana Nabilah (2021) Design, development and performance evaluation of green nipah banana (Musa acuminata x balbisiana colla ABB group) peeling tool for small scale industry. Masters thesis, Universiti Putra Malaysia.

Zainudin, Farah Ain (2021) Alternative dispute resolution as feasible resolution for construction disputes from the perspective of CIDB G7 contractors. Masters thesis, Universiti Putra Malaysia.

Zohrul, Islam Mohammad (2021) Optimal Power Flow of power systems using Harris Hawks Optimization and Salp Swarm Algorithm. Masters thesis, Universiti Putra Malaysia.

This list was generated on Sun Nov 24 18:11:00 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0