Items where Division is "Faculty of Engineering" and Year is 2020

Group by: Creators | Item Type | No Grouping

Jump to: Article | Book | Book Section | Conference or Workshop Item | Thesis

Number of items: 582.

Article

A. A., Alawady and M. F. M., Yousof and Azis, Norhafiz and Talib, Mohd Aizam (2020) Frequency response analysis technique for induction motor short circuit faults detection. International Journal of Power Electronics and Drive Systems, 11 (3). 1653 - 1659. ISSN 2088-8694; ESSN: 2722-256X

A. Aziz, Md Maniruzzaman and Kassim, Khairul Anuar and Shokravi, Zahra and Mohd Jakarni, Fauzan and Hong, Yuan Liu and Zaini, Nabilah and Lian, See Tan and Saiful Islam, A. B. M. and Shokravi, Hoofar (2020) Two-stage cultivation strategy for simultaneous increases in growth rate and lipid content of microalgae: a review. Renewable and Sustainable Energy Reviews, 119. pp. 1-15. ISSN 1364-0321; ESSN: 1879-0690

A.M., Noor Azammi and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Hameed Sultan, Mohamed Thariq (2020) Physical and damping properties of kenaf fibre filled natural rubber/thermoplastic polyurethane composites. Defence Technology, 16 (1). 29 - 34. ISSN 2214-9147

Ab. Latif, Farah Ezzah and Zainal Abidin, Zurina and Cardona, Francisco and Awang Biak, Dayang Radiah and Abdan, Khalina and Md. Tahir, Paridah and Liew, Kan Ern (2020) Bio-resin production through ethylene unsaturated carbon using vegetable oils. Processes, 8 (1). art. no. 48. pp. 1-15. ISSN 2227-9717

Abbas, Bashar Khudhair and Fong, Wai Leng and Haider, Kh A. and Omar Baki, Sharudin and Mohd Zaid, Mohd Hafiz and Mahdi, Mohd Adzir (2020) Optical studies on Tb3+: Dy3+ singly and doubly doped borosilicate glasses for white light and solid state lighting applications. Journal of Non-Crystalline Solids, 534. art. no. 119943. pp. 1-15. ISSN 0022-3093; ESSN: 1873-4812

Abd Maurad, Zulina and Abdullah, Luqman Chuah and Anuar, Mohd Shamsul and Abdul Karim Shah, Nor Nadiah and Idris, Zainab (2020) Preparation, characterization, morphological and particle properties of crystallized palm-based methyl ester sulphonates (MES) powder. Molecules, 25 (11). pp. 1-15. ISSN 1420-3049

Abdalla, Ahmed N. and Nazir, Muhammad Shahzad and Ming, Xin Jiang and Kadhem, Athraa Ali and Abdul Wahab, Noor Izzri and Suqun, Cao and Rendong, Ji (2020) Metaheuristic searching genetic algorithm based reliability assessment of hybrid power generation system. Energy Exploration & Exploitation, 39 (1). pp. 488-501. ISSN 0144-5987; ESSN: 2048-4054

Abdelkader, Hassani and Hussain, Siti Aslina and Abdullah, Norhafizah and Kamarudin, Suryani and Rosli, Rozita (2020) Preparation, antioxidant potential and angiotensin converting enzyme (ACE) inhibitory activity of gum Arabic-stabilised magnesium orotate nanoparticles. International Food Research Journal, 27 (1). pp. 150-159. ISSN 1985-4668; ESSN: 2231-7546

Abdelkader, Hassani and Hussain, Siti Aslina and Abdullah, Norhafizah and Kamarudin, Suryani and Rosli, Rozita (2020) Preparation, antioxidant potential and angiotensin converting enzyme (ACE) inhibitory activity of gum arabic-stabilized magnesium orotate nanoparticles. International Food Research Journal, 27 (1). 150 - 159. ISSN 2231 7546

Abdul Aziz, Faieza and S.M.A Alsaeed, Adel and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Al-Hakim, Muhammad Faris (2020) Mixed reality improves education and training in assembly processes. Journal of Engineering and Technological Sciences, 52 (4). 598 - 607. ISSN 2337-5779; ESSN: 2338-5502

Abdul Aziz, Nuraini and Samsudin, Salmi and Abdul Aziz, Hairuddin (2020) Efficiency and boiler parameters effects in sub-critical boiler with different types of sub-bituminous coal. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 44 (1). 247 - 256. ISSN 2228-6187; ESSN: 2364-1835

Abdul Halim, Noor Amirah and Zainal Abidin, Zurina and Siajam, Shamsul Izhar and Chong, Gun Hean and Harun, Mohd Razif (2020) Screening of factors influencing the yield of Citrus hystrix leaves essential oil extracted via pressurized hot water extraction based on resolution V fractional factorial design. Journal of Food Process Engineering, 43 (11). pp. 1-13. ISSN 1745-4530

Abdul Hamid, Mohamad Rezi and Jeong, Hae Kwon (2020) Flow synthesis of polycrystalline ZIF-8 membranes on polyvinylidene fluoride hollow fibers for recovery of hydrogen and propylene. Journal of Industrial and Engineering Chemistry, 88. 319 - 327. ISSN 1226-086X

Abdul Karim, Julia and Lanyau, Tony and Maskin, Masleha and Anuar, M. A. S. and Che Soh, Azura and Abdul Rahman, Ribhan Zafira (2020) Preliminary study on fault detection using artificial neural network for water-cooled reactors. Journal of Mechanical Engineering and Sciences, 14 (4). 7469 - 7480. ISSN 2289-4659; ESSN: 2231-8380

Abdul Laziz, A'liya and Mazlan, Norkhairunnisa and Mohd Yusoff, Mohd Zuhri and Mohamed Ariff, Azmah Hanim (2020) Investigation of alkaline surface treatment effected on flax fibre woven fabric with biodegradable polymer based on mechanical properties. Journal of Engineering and Technological Sciences, 52 (5). 677 - 690. ISSN 2337-5779; ESSN: 2338-5502

Abdul Mutalib, Mohd Zurrayen and Ismail, Mohd Idris Shah and As'arry, Azizan and Abdul Jalil, Nawal Aswan (2020) Evaluation of tool wear and machining performance by analyzing vibration signal in friction drilling. Jurnal Tribologi, 24. 100 - 109. ISSN 2289-7232

Abdul Mutalib, Mohd Zurrayen and Ismail, Mohd Idris Shah and As'arry, Azizan and Abdul Jalil, Nawal Aswan (2020) Multi-objective optimization in friction drilling of AISI1045 steel using grey relational analysis. International Journal of Modern Manufacturing Technologies, 12 (1). 75 - 81. ISSN 2067–3604

Abdul Rani, Nadia and Abdul Aziz, Faieza and Hairuddin, Abdul Aziz and Ahmad, Siti Azfanizam and Hemdi, Abdul Rahman (2020) Augmented reality: capabilities and challenges in machining industry aligned with industry 4.0. Advances in Materials and Processing Technologies. pp. 1-9. ISSN 2374-068X; ESSN: 2374-0698

Abdul Rashid, Aneesa and Devaraj, Navin Kumar and Mohd Yusof, Halidah and Mustapha, Fauzan and Wong, Shaw Voon and Ismail, Ahmad Filza and Ismail, Khairil Idham and Qureshi, Ahmad Munir and Nordin, Rusli (2020) Prevalence and predictors of road crash involvement among medical doctors in Malaysia: a cross-sectional study protocoll. BMJ Open, 10 (7). pp. 1-5. ISSN 2044-6055; ESSN: 2044-6055

Abdul Wahab, Siti Aisyah and Matori, Khamirul Amin and Mohd Zaid, Mohd Hafiz and Awang Kechik, Mohd Mustafa and Ab Aziz, Sidek and A. Talib, Rosnita and Khirel Azman, Aisyah Zakiah and Mohamed Khaidir, Rahayu Emilia and Ahmad Khiri, Mohammad Zulhasif and Effendy, Nuraidayani (2020) A study on optical properties of zinc silicate glass-ceramics as a host for green phosphor. Applied Sciences-Basel, 10 (14). art. no. 4938. pp. 1-11. ISSN 2076-3417

Abdul Wahit, Mohamad Aizat and Ahmad, Siti Anom and Marhaban, Mohammad Hamiruce and Wada, Chikamune and Izhar, Lila Iznita (2020) 3D printed robot hand structure using four-bar linkage mechanism for prosthetic application. Sensors, 20 (15). art. no. 4174. pp. 1-22. ISSN 1424-8220

Abdulhamed, Ali Jaber and Adam, Nor Mariah and Ab. Kadir, Mohd. Zainal Abidin and Hairuddin, Abdul Aziz (2020) Flow and thermal mechanisms in receiver tube of parabolic trough collectors with rings axially connected together and radially connected to the inner tube surface. Journal of Engineering and Applied Sciences, 15 (3). 762 - 772. ISSN 1816-949X; ESSN: 1818-7803

Abdulhamed, Ali Jaber and Rasheed, Maithem Hussein and Kadhim Kareem, Hanaa and Adam, Nor Mariah and Ab-Kadir, Mohd. Zainal A. and Hairuddin, Abdul Aziz (2020) Design and performance testing of a parabolic trough collector including deformation test of the receiver tube. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 67 (2). 47 - 65. ISSN 2289-7879

Abdulhussain, Sadiq H. and Al-Haddad, Syed Abdul Rahman and Saripan, M. Iqbal and Mahmood, Basheera M. and Hussien, Aseel (2020) Fast temporal video segmentation based on Krawtchouk-Tchebichef moments. IEEE Access, 8. 72347 - 72359. ISSN 2169-3536

Abdullah, Norazlin and Chin, Nyuk Ling (2020) Optimising tropical fruit juice quality using thermosonication-assisted extraction via blocked face-centered composite design. Processes, 9 (1). art. no. 3. pp. 1-15. ISSN 2227-9717

Abdullah, Nurul Hidayah and Shameli, Kamyar and Abdullah, Ezzat Chan and Abdullah, Luqman Chuah (2020) Low cost and efficient synthesis of magnetic iron oxide/activated sericite nanocomposites for rapid removal of methylene blue and crystal violet dyes. Materials Characterization, 163. pp. 1-21. ISSN 1044-5803

Abdullah, Nurul Hidayah and Shameli, Kamyar and Nia, Pooria Moozarm and Etesami, Mohammad and Abdullah, Ezzat Chan and Abdullah, Luqman Chuah (2020) Electrocatalytic activity of starch/Fe3O4/zeolite bionanocomposite for oxygen reduction reaction. Arabian Journal of Chemistry, 13 (1). 1297 - 1308. ISSN 1878-5352

Abdullah, Zalizawati and Taip, Farah Saleena and Mustapa Kamal, Siti Mazlina and Abdul Rahman, Ribhan Zafira (2020) Nonlinear model-based inferential control of moisture content of spray dried coconut milk. Foods, 9 (9). art. no. 1177. pp. 1-22. ISSN 2304-8158

Abdullah Khan and Hizam, Hashim and Abdul Wahab, Noor Izzri and Othman, Mohammad Lutfi (2020) Solution of optimal power flow using non-dominated sorting multi-objective based hybrid firefly and particle swarm optimization algorithm. Energies, 13 (16). art. no. 4265. pp. 1-24. ISSN 1996-1073

Abdullahi, Sani and Ismail, Roslan and Zaibon, Syaharudin and Ahmad, Nordin and S. S., Noma (2020) Land capability classification of Katsina Central, Nigeria using remote sensing and GIS techniques. Test Engineering and Management, 83 (Jul-Aug 2020). 193 - 199. ISSN 0193-4120

Abdullahi Lawal, Abubakar and Hassan, Mohd Ali and Ahmad Farid, Mohamed Abdillah and Tengku Yasim Anuar, Tengku Arisyah and Mohd Yusoff, Mohd Zulkhairi and Zakaria, Mohd Rafein and Roslan, Ahmad Muhaimin and Mokhtar, Mohd Noriznan and Shirai, Yoshihito (2020) One-step steam pyrolysis for the production of mesoporous biochar from oil palm frond to effectively remove phenol in facultatively treated palm oil mill effluent. Environmental Technology & Innovation, 18. art. no. 100730. pp. 1-12. ISSN 2352-1864

Abdullahi Lawal, Abubakar and Hassan, Mohd Ali and Ahmad Farid, Mohammed Abdillah and Tengku Yasim Anuar, Tengku Arisyah and Mohd Yusoff, Mohd Zulkhairi and Zakaria, Mohd Rafein and Roslan, Ahmad Muhaimin and Mokhtar, Mohd Noriznan and Shirai, Yoshihito (2020) Production of biochar from oil palm frond by steam pyrolysis for removal of residual contaminants in palm oil mill effluent final discharge. Journal of Cleaner Production, 265. art. no. 121643. pp. 1-11. ISSN 0959-6526

Abdulsalam, Mohammed and Che Man, Hasfalina and Goh, Pei Sean and Md. Yunos, Khairul Faezah and Zainal Abidin, Zurina and Mohamad Idris, Aida Isma and Ismail, Ahmad Fauzi (2020) Permeability and antifouling augmentation of a hybrid PVDF-PEG membrane using nano-magnesium oxide as a powerful mediator for POME decolorization. Polymers, 12 (3). art. no. 549. pp. 1-21. ISSN 2073-4360

Abdulsalam, Mohammed and Che Man, Hasfalina and Goh, Pei Sean and Yunos, Khairul Faezah and Zainal Abidin, Zurina and Isma M.I., Aida and Ismail, Ahmad Fauzi (2020) Permeability and antifouling augmentation of a hybrid PVDF-PEG membrane using Nano-magnesium oxide as a powerful mediator for POME decolorization. Polymers, 12 (3). art. no. 549. pp. 1-22. ISSN 2073-4360

Abdulsalam, Mohammed and Che Man, Hasfalina and Yunos, Khairul Faezah and Zainal Abidin, Zurina and Idris, Aida Isma and Hamzah, Muhamad Hazwan (2020) Augmented yeast-extract and diary-waste for enhancing bio decolourization of palm oil mill effluent using activated sludge. Journal of Water Process Engineering, 36. art. no. 101263. pp. 1-14. ISSN 2214-7144

Abdulsalam, Mohammed and Che Man, Hasfalina and Zainal Abidin, Zurina and Yunos, Khairul Faezah and Idris, Aida Isma (2020) Decolorization of palm oil mill effluent by Klebsiella Pneumonia ABZ11: remediation efficacy and statistical optimization of treatment conditions. Frontiers in Microbiology, 11. art. no. 675. pp. 1-15. ISSN 1664-302X

Abed, Sadeq Salman and Abu Talib, Abd. Rahim and Saadon, Syamimi and Hameed Sultan, Mohamed Thariq (2020) Hybrid nanofluid flow and heat transfer over backward and forward steps: a review. Powder Technology, 363. 448 - 472. ISSN 0032-5910; ESSN: 1873-328X

Abral, Hairul and Ariksa, Jeri and Mahardika, Melbi and Handayani, Dian and Aminah, Ibtisamatul and Sandrawati, Neny and Salit, Mohd Sapuan and Rushdan, Ahmad Ilyas (2020) Highly transparent and antimicrobial PVA based bionanocomposites reinforced by ginger nanofiber. Polymer Testing, 81. pp. 1-8. ISSN 0142-9418

Abral, Hairul and Atmajaya, Arief and Mahardika, Melbi and Hafizulhaq, Fadli and Kadriadi and Handayani, Dian and Salit, Mohd Sapuan and Rushdan, Ahmad Ilyas (2020) Effect of ultrasonication duration of polyvinyl alcohol (PVA) gel on characterizations of PVA film. Journal of Materials Research and Technology, 9 (2). 2477 - 2486. ISSN 2238-7854

Abu Bakar, Mohd Supian and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams and Ya, Hamdan (2020) Crashworthiness performance of hybrid kenaf/glass fiber reinforced epoxy tube on winding orientation effect under quasi-static compression load. Defence Technology, 16 (5). 1051 - 1061. ISSN 2214-9147

Adam, Nor Mariah and Attia, Osam Hassan and Al-Sulttani, Ali Omran Muhsin and Mahmood, Hussein Adel and As'arry, Azizan and Md Rezali, Khairil Anas (2020) Numerical analysis for solar panel subjected to an external force to overcome adhesive force in desert areas. Journal of CFD Letters, 12 (9). 60 - 75. ISSN 2180-1363

Adesiji, Richard Adeolu and Nik Daud, Nik Norsyahariati and Asogwa, Evarestus Osita and Mangey, Jarumi Akila and Musa, Hassan Hassan and Adaudu, Ignatius Idoko (2020) Irrigation and crop water requirement estimation for oil palms using soil moisture balance model in Peninsular Malaysia. Journal of Agricultural and Food Engineering, 1 (3). art. no. 0018. pp. 1-8. ISSN 2716-6236

Adeyi, Abel Adekanmi and Md. Jamil, Siti Nurul Ain and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Lau, Kia Li and Alias, Nor Halaliza (2020) Simultaneous adsorption of malachite green and methylene blue dyes in a fixed-bed column using poly(acrylonitrile-co-acrylic acid) modified with thiourea. Molecules, 25 (11). art. no. 2650. pp. 1-17. ISSN 1420-3049

Ahmad, Junaid and Rashid, Umer and Patuzzi, Francesco and Alamoodi, Nahla and Choong, Thomas Shean Yaw and Soltani, Soroush and Ngamcharussrivichai, Chawalit and Nehdi, Imededdine Arbi and Baratieri, Marco (2020) Mesoporous acidic catalysts synthesis from dual stage and rising co-current gasification char: application for FAME production from waste cooking oil. Materials, 13 (4). pp. 1-10. ISSN 1996-1944

Ahmad, Junaid and Rashid, Umer and Patuzzi, Francesco and Alamoodi, Nahla and Choong, Thomas Shean Yaw and Soltani, Soroush and Ngamcharussrivichai, Chawalit and Nehdi, Imededdine Arbi and Baratieri, Marco (2020) Mesoporous acidic catalysts synthesis from dual-stage and rising co-current gasification char: application for FAME production from waste cooking oil. Materials, 13 (4). art. no. 871. pp. 1-10. ISSN 1996-1944

Ahmad, Siti Azfanizam and Kok, Weng Ng and Airdzaman, Siti Hajar and Mei, Choo Ang and Suliano, Salami Bahariah (2020) Improving queuing system with limited resources using TRIZ and arena simulation. International Journal of Innovative Technology and Exploring Engineering, 9 (7). 911 - 919. ISSN 2278-3075

Ahmad Farid, Mohammed Abdillah and Roslan, Ahmad Muhaimin and Hassan, Mohd Ali and Hasan, Muhamad Yusuf and Othman, Mohd Ridzuan and Shirai, Yoshihito (2020) Net energy and techno-economic assessment of biodiesel production from waste cooking oil using a semi-industrial plant: a Malaysia perspective. Sustainable Energy Technologies and Assessments, 39. art. no. 100700. pp. 1-11. ISSN 2213-1388; ESSN: 2213-1396

Ahmad Faris, Ahmad Fariduddin and Basri, Adi Azriff and Basri, Ernnie Illyani and Gires, Ezanee and Hameed Sultan, Mohamed Thariq and Ahmad, Kamarul Arifin (2020) Computation fluid dynamics study on aerodynamics blade design of Advance Precision Composite (APC) slow flyer propeller. International Journal of Mechanical and Production Engineering Research and Development, 10 (6). 265 - 280. ISSN 2249–6890; ESSN: 2249–8001

Ahmad Nadzri, Seri Nur Zumaimi and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Safri, Syafiqah Nur Azrie and Basri, Adi Azriff (2020) A review on the kenaf/glass hybrid composites with limitations on mechanical and low velocity impact properties. Polymer, 12 (6). art. no. 1285. pp. 1-13. ISSN 2073-4360

Ahmad Nazri, Nur Asyikin and Azis, Raba'ah Syahidah and Sulaiman, Syazana and Azuan, Nurul Ayuni and Shaari, Abdul Halim and Che Man, Hasfalina and Ismail, Ismayadi and Ibrahim, Idza Riati and Mohd Saiden, Norlaily (2020) Removal of copper ions from aqueous solution using waste mill scales. Solid State Phenomena, 307. 247 - 251. ISSN 1012-0394; ESSN: 1662-9779

Ahmad Nazri, Nur Asyikin and Azis, Raba’ah Syahidah and Mustaffa, Muhammad Syazwan and Shaari, Abdul Halim and Ismail, Ismayadi and Che Man, Hasfalina and Mohd Saiden, Norlaily and Abdullah, Nor Hapishah (2020) Magnetite nanoparticles (MNPs) used as cadmium metal removal from the aqueous solution from mill scales waste sources. Sains Malaysiana, 49 (4). 847 - 858. ISSN 0126-6039

Ahmed, Maryam Abdulazeez and Noordin, Nor Kamariah and Sali, Aduwati and Hashim, Fazirulhisyam (2020) Multi-criteria handover decision for heterogeneous networks: carrier aggregation deployment scenario. International Journal of Computer Networks and Communications, 12 (4). 41 - 54. ISSN 0975-2293; ESSN: 0674-9322

Aili Hamzah, Adila Fazliyana and Hamzah, Muhammad Hazwan and Ahmad Mazlan, Fauzan Najmi and Che Man, Hasfalina and Jamali, Nur Syakina and Siajam, Shamsul Izhar (2020) Anaerobic co-digestion of pineapple wastes with cow dung: effect of different total solid content on bio-methane yield. Advances in Agricultural and Food Research Journal, 1 (1). pp. 1-12. ISSN 2735-1084

Aker, Elhadi Emhemad and Othman, Mohammad Lutfi and Veerasamy, Veerapandiyan and Aris, Ishak and Abdul Wahab, Noor Izzri and Hizam, Hashim (2020) Fault detection and classification of shunt compensated transmission line using discrete wavelet transform and Naive Bayes classifier. Energies, 13 (1). art. no. 243. pp. 1-24. ISSN 1996-1073

Akinfalabi, Shehu Ibrahim and Rashid, Umer and Nehdi, Imededdine Arbi and Shean, Thomas Yaw Choong and Mohamed Sbihi, Hassen and Gewik, Mohamed Mossad (2020) Optimization and blends study of heterogeneous acid catalyst assisted esterification of palm oil industry by-product for biodiesel production. Royal Society Open Science, 7 (1). pp. 1-17. ISSN 2054-5703

Al Qahtani, Turki and Yaakob, Mohd Saffuan and Yidris, Noorfaizal and Sulaiman, Shamsuddin and Ahmad, Kamarul Arifin (2020) A review on water leakage detection method in the water distribution network. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (2). 152 - 163. ISSN 2289-7879

Al-Ajmi, Mohammad and Muda, Mohd Khairul Hafiz and Abdul Halin, Izhal and Mustapha, Faizal and Mohd Ariffin, Mohd Khairol Anuar (2020) Design of true hybrid solar wind turbine for smaller hybrid renewable energy power plants. Journal of Engineering and Technological Sciences, 52 (6). 881 - 890. ISSN 2337-5779

Al-Alimi, Abdulmoghni Ali Wazea and Al-Mansoori, Mohammed Hayder and Sarmani, Abdul Rahman and Abas, Ahmad F. and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2020) A wide flat triple Brillouin frequency spacing multiwavelength fiber laser assisted by four wave mixing. Journal of Lightwave Technology, 38 (23). 6648 - 6654. ISSN 0733-8724; ESSN: 1558-2213

Al-Janabi, Ahmed Mohammed Sami and Ghazali, Abdul Halim and Ghazaw, Yousry Mahmoud and Afan, Haitham Abdulmohsin and Al-Ansari, Nadhir and Yaseen, Zaher Mundher (2020) Experimental and numerical analysis for earth-fill dam seepage. Sustainability, 12 (6). art. no. 2490. pp. 1-14. ISSN 2071-1050

Al-Janabi, Ahmed Mohammed Sami and Ghazali, Abdul Halim and Yusuf, Badronnisa and Sh. Sammen, Saad and Afan, Haitham Abdulmohsin and Al-Ansari, Nadhir and Shahid, Shamsuddin and Yaseen, Zaher Mundher (2020) Optimizing height and spacing of check dam systems for better grassed channel infiltration capacity. Applied Sciences, 10 (11). art. no. 3725. pp. 1-17. ISSN 2076-3417

Al-Obaidi, M. R. and Mustafa, Mohd. Amrallah and Wan Hasan, Wan Zuha and Azis, Norhafiz and Sabry, Ahmad H. and Ab Kadir, Mohd Zainal Abidin (2020) Improvement in energy conversion for unmanned aerial vehicle charging pad. Indonesian Journal of Electrical Engineering and Computer Science, 17 (2). 767 - 773. ISSN 2502-4752; ESSN: 2502-4760

Al-Obaidi, Mohammed Rmaez Hadi and Wan Hasan, Wan Zuha and Mustafa, Mohd Amrallah and Azis, Norhafiz (2020) Charging platform of chess-pad configuration for Unmanned Aerial Vehicle (UAV). Applied Sciences-Basel, 10 (23). pp. 1-13. ISSN 2076-3417

Al-Ogaili, Ali Saadon and Aris, Ishak and Ramasamy, Agileswari and Tengku Juhana, Tengku Hashim and Marsadek, Marayati and Sabry, Ahmad H. (2020) Integrating Internal Model Controller (IMC) into electric vehicle charger of multiple charging mode: DC and AC fast charging. Applied Sciences, 10 (12). art. no. 4179. pp. 1-22. ISSN 2076-3417

Al-Otaibi, Mohammed Sh. and Alothman, Othman Y. and Alrashed, Maher M. and Anis, Arfat and Naveen, Jesuarockiam and Jawaid, Mohammad (2020) Characterization of date palm fiber-reinforced different polypropylene matrices. Polymers, 12 (3). art. no. 597. pp. 1-19. ISSN 2073-4360

Al-Qazzaz, Noor Kamal and Sabir, Mohannad K. and Md. Ali, Sawal Hamid and Ahmad, Siti Anom and Grammer, Karl (2020) Electroencephalogram profiles for emotion identification over the brain regions using spectral, entropy and temporal biomarkers. Sensors, 20 (1). art. no. 59. pp. 1-21. ISSN 1424-8220

Al-shaheen, Husam Hasan Abdulaali and Teh, Christopher Boon Sung and Abdulaali, Ali H. and Kamal, Md Rowshon and Ismail, Roslan (2020) Optimization of silt pit dimensions and the water supply period in oil palm plantation by artificial neutral network estimation. EnvironmentAsia, 13 (1). 53 - 66. ISSN 1906-1714; ESSN: 2586-8861

AlSultan, Hussein Abdulsalam Ali and Mustafa, Mohd Amrallah and Shafie, Suhaidi and Wan Hasan, Wan Zuha and Khalifa, Ali (2020) Oxygen free graphene/TiO2 nanocomposite synthesis technique for dye-sensitized solar cells photo-anode. Indonesian Journal of Electrical Engineering and Computer Science, 17 (2). 637 - 645. ISSN 2502-4752

Alawee, Wissam H. and Almolhem, Yousef A. and Yusuf, Badronnisa and Mohammad, Thamer Ahmad and Dhahad, Hayder A. (2020) Variation of coefficient of friction and friction head losses along a pipe with multiple outlets. Water, 12 (3). art. no. 844. pp. 1-15. ISSN 2073-4441

Alezabi, Kamal Ali and Hashim, Fazirulhisyam and Hashim, Shaiful J. and Ali, Borhanuddin M. and Jamalipour, Abbas (2020) Efficient authentication and re-authentication protocols for 4G/5G heterogeneous networks. EURASIP Journal on Wireless Communications and Networking, 2020. art. no. 105. pp. 1-34. ISSN 1687-1472; ESSN: 1687-1499

Alghrairi, Mokhalad Khaleel and Kadhim, Imam and Sulaiman, Nasri and Mohd Sidek, Roslina and Mutashar, Saad (2020) Simple and efficient transcutaneous inductive micro-system device based on ASK modulation at 6.78 MHz ISM band. Tehnicki Vjesnik-Technical Gazette, 27 (5). pp. 1478-1485. ISSN 1330-3651; ESSN: 1848-6339

Alghrairi, Mokhalad Khaleel and Sulaiman, Nasri and Mutashar, Saad (2020) Health care monitoring and treatment for coronary artery diseases: challenges and issues. Sensors, 20 (15). pp. 1-23. ISSN 1424-3210; ESSN: 1424-8220

Alhawari, Adam R. H. and Almawgani, A. H. M. and Alghamdi, Hisham and Hindi, Ayman T. and Saeedi, Tale and Ismail, Alyani (2020) Omega-shaped tag antenna with inductively-coupled feeding using U-shaped stepped-impedance resonators for RFID applications. Applied Computational Electromagnetics Society Journal, 35 (8). 951 - 961. ISSN 1054-4887; ESSN: 1943-5711

Ali, Sulaiha and Hussain, Siti Aslina and Mohd Tohir, Mohd Zahirasri and Nuruddin, Ahmad Ainuddin (2020) Statistical analysis of Malaysian timber’s combustion data from cone calorimeter test. Pertanika Journal of Science and Technology, 28 (spec.1). 185 - 198.

Ali, Zuhura Juma and Noordin, Nor Kamariah and Sali, Aduwati and Hashim, Fazirulhisyam (2020) Fair energy-efficient resource allocation for downlink NOMA heterogeneous networks. IEEE Access, 8 (1). 200129 - 200145. ISSN 2169-3536

Alias, Nor Azlina and Mohd Fauzi, Nur Hanisah and Yusuf, Badronnisa and Meor Razali, Meor Mohammad Fared (2020) Lab scale study on integrated GSI for urban drainage systems. Journal of Physics: Conference Series, 1529. art. no. 042008. pp. 1-11. ISSN 1742-6588; ESSN: 1742-6596

Aliteh, Nor Aziana and Minakata, Kaiko and Tashiro, Kunihisa and Wakiwaka, Hiroyuki and Kobayashi, Kazuki and Nagata, Hirokazu and Misron, Norhisam (2020) Fruit battery method for oil palm fruit ripeness sensor and comparison with computer vision method. Sensors, 20 (3). art. no. 637. pp. 1-14. ISSN 1424-8220

Alkbir, M. F. M. and Junandi, Fatihhi and Baki, Adnan and Salit, Mohd Sapuan and Kosnan, Mohamad Shahrul Effendy and Mohamed, S. B. and Hamouda, M. S. and Endut, Azizah (2020) Crushing behaviour of plain weave composite hexagonal cellular structure. Sains Malaysiana, 49 (9). 2211 - 2219. ISSN 0126-6039; ESSN: 2735-0118

Alkhafaji, Falih Salih and Wan Hasan, Wan Zuha and Mohd Isa, Maryam and Sulaiman, Nasri (2020) A response time reduction for DC motor controller using SISO technique. Indonesian Journal of Electrical Engineering and Computer Science, 17 (2). 895 - 906. ISSN 2502-4752

Almassri, Ahmed M. and Wan Hasan, Wan Zuha and Wada, Chikamune and Horio, Keiichi (2020) Evaluation of a commercial force sensor for real time applications. ICIC Express Letters, Part B: Applications, 11 (5). 421 - 426. ISSN 2185-2766

Almohammed, Bahaa and Ismail, Alyani and Sali, Aduwati (2020) Electro-textile wearable antennas in wireless body area networks: materials, antenna design, manufacturing techniques, and human body consideration—a review. Textile Research Journal, 91 (5-6). pp. 1-27. ISSN 0040-5175; ESSN: 1746-7748

Alomari, Nashwan K. and Yusuf, Badronnisa and Mohammad Ali, Thamer Ahmad and Ghazali, Abdul Halim (2020) Influence of diversion angle on water and sediment flow into diversion channel. International Journal of Sediment Research, 35 (6). 600 - 608. ISSN 1001-6279

Alrifaey, Moath and Hong, Tang Sai and As'arry, Azizan and Supeni, Eris Elianddy and Ang, Chun Kit (2020) Optimization and selection of maintenance policies in an electrical gas turbine generator based on the hybrid reliability-centered maintenance (RCM) model. Processes, 8 (6). pp. 1-25. ISSN 2227-9717

Alrubaye, Yasir Layth and Yusuf, Badronnisa and Hamad, Safaa Noori (2020) Development of a self-regulated bubble irrigation system to control the size and shape of wetting fronts. Pertanika Journal of Science and Technology, 28 (4). pp. 1297-1313. ISSN 0128-7680; ESSN: 2231-8526

Alrubaye, Yasir Layth and Yusuf, Badronnisa and Hamad, Safaa Noori (2020) Development of a self-regulated bubble irrigation system to control the size and shape of wetting fronts. Pertanika Journal of Science & Technology, 28 (4). pp. 1297-1313. ISSN 0128-7680; ESSN: 2231-8526

Alsaffar, May Ali and Abdul Rashid, Suraya and Ayodele, Bamidele Victor and Hamidon, Mohd Nizar and Md. Yasin, Faizah and Ismail, Ismayadi and Hosseini, Soraya and Babadi, Farahnaz Eghbali (2020) Response surface optimization of multilayer graphene growth on alumina-supported bimetallic cobalt–nickel substrate. Arabian Journal for Science and Engineering volume, 45. pp. 7455-7465. ISSN 2193-567X; ESSN: 2191-4281

Alsayed, Abdallah S. Z. and Raja Ahmad, Raja Mohd Kamil and Harun @ Ramli, Hafiz Rashidi and As'arry, Azizan (2020) An automated data acquisition system for pinch grip assessment based on Fugl Meyer protocol: a feasibility study. Applied Sciences, 10 (10). art. no. 3436. pp. 1-18. ISSN 2076-3417

Alsghayer, Rabia and Ali, Salmiaton and Mohammed, Thamer Ahmed and Idris, Azni and Ishak, Che Fauziah (2020) Removal efficiencies of constructed wetland planted with Phragmites and Vetiver in treating synthetic wastewater contaminated with high concentration of PAHs. Sustainability, 12 (8). art. no. 3357. pp. 1-18. ISSN 2071-1050

Alsubari, S. and Zuhri, M.Y.M. and Sapuan, S.M. and Ishak, M.R. (2020) Quasi-static compression behaviour of interlocking core structures made of flax fibre reinforced polylactic acid composite. Journal of Materials Research and Technology-JMR&T, 9 (6). 12065 - 12070. ISSN 2238-7854

Alsultan, Abdulkareem Ghassan and Mijan, Nurul Asikin and Alsultan, Mustafa G. and Lee, Hwei Voon and Wilson, Karen and Yap, Taufiq Yun Hin (2020) Efficient deoxygenation of waste cooking oil over Co3O4–La2O3-doped activated carbon for the production of diesel-like fuel. RSC Advances, 10 (9). 4996 - 5009. ISSN 2046-2069

Anene, Franklin and Jaafar, Che Nor Aiza and Zainol, Ismail and Mohamed Ariff, Azmah Hanim and Mohd Tahir, Suraya (2020) Additively manufactured titanium alloys and effect of hydroxyapatite coating for biomedical applications: a review. Proceedings of the Institution of Mechanical Engineers: Design and Applications, 234 (11). 1450 - 1461. ISSN 0146-44207; ESSN: 2041-3076

Ang, Yuhao and Che'ya, Nik Norasma and Roslin, Nor Athirah and Ismail, Mohd Razi (2020) Rice chlorophyll content monitoring using vegetation indices from multispectral aerial imagery. Pertanika Journal of Science and Technology, 28 (3). pp. 779-795. ISSN 0128-7680; ESSN: 2231-8526

Ang, Yuhao and Che'ya, Nik Norasma and Roslin, Nor Athirah and Ismail, Mohd Razi (2020) Rice chlorophyll content monitoring using vegetation indices from multispectral aerial imagery. Pertanika Journal of Science & Technology, 28 (3). pp. 779-795. ISSN 0128-7680; ESSN: 2231-8526

Aolin, Chen and A. A., Al Mayas and Abdul Aziz, Faieza and Yidris, Noorfaizal and Ahmad, Kamarul Arifin (2020) Investigation of solid propellant rocket motor nozzle via CFD simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (2). pp. 1-8. ISSN 2289-7879

Araji, Hamidreza Ahmadzadeh and Wayayok, Aimrun and Daneshian, Jahanfar and Mirzaei, Majid and Bavani, Ali Reza Massah and Teh, Christopher Boon Sung and Ahmadi, Parisa (2020) Effects of projected climate change on quantity and quality of soybean yield under different emission scenarios. Current Science, 118 (1). 103 - 107. ISSN 0011-3891

Arefin, Ahmed Amirul and Md Hasan, Khairul Nisak and Romlie, Mohd Fakhizan and Abdullah, Mohd Faris and Ali, Mohd Nazri and Othman, Mohammad Lutfi (2020) Determining islanding operation using micro grid phasor measurement unit parameters. International Journal of Emerging Trends in Engineering Research, 8 (1 spec. 1). 97 - 101. ISSN 2347-3983

Ariffin, Muhammad Mirza and Aung, Min Min and Abdullah, Luqman Chuah and Salleh, Mek Zah (2020) Assessment of corrosion protection and performance of bio-based polyurethane acrylate incorporated with nano zinc oxide coating. Polymer Testing, 87. art. no. 106526. pp. 1-9. ISSN 0142-9418

Ariffin, Siti Hajar and Gkatzionis, Konstantinos and Bakalis, Serafim (2020) Effect of compression on mechanical properties of ready-to-eat (RTE) spinach varieties. Malaysian Applied Biology, 49 (3). 107 - 115. ISSN 2462-151X

Asghar, Muhammad Tuseef and Yusof, Yus Aniza and Mokhtar, Mohd Noriznan and Ya'acob, Mohammad Effendy and Mohd Ghazali, Hasanah and Chang, Lee Sin and Manaf, Yanty Noorzianna (2020) Coconut ( Cocos nucifera L.) sap as a potential source of sugar: antioxidant and nutritional properties. Food Science & Nutrition, 8 (4). 1777 - 1787. ISSN 2048-7177

Asghar, Muhammad Tuseef and Yusof, Yus Aniza and Mokhtar, Mohd Noriznan and Ya'acob, Mohammad Effendy and Mohd Ghazali, Hasanah and Varith, Jaturapatr and Chang, Lee Sin and Abdul Manaf, Yanty Noorzianna (2020) Processing of coconut sap into sugar syrup using rotary evaporation, microwave and open-heat evaporation techniques. Journal of the Science of Food and Agriculture, 100 (10). 4012 - 4019. ISSN 1097-0010

Asghar, Muhammad Tuseef and Yusof, Yus Aniza and Mokhtar, Mohd Noriznan and Yaacob, Mohammad Effendy and Mohd Ghazali, Hasanah and Chang, Lee Sin and Manaf, Yanty Noorzianna (2020) Effect of processing method on vitamin profile, antioxidant properties and total phenolic content of coconut (Cocos nucifera L.) sugar syrup. International Journal of Food Science and Technology, 55 (7). 2762 - 2770. ISSN 0950-5423; ESSN: 1365-2621

Asmawi, Nazrin Nurarief Mardi and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and R. A., Ilyas and R., Syafiq and Sherwani, Shah Faisal Khan (2020) Nanocellulose reinforced thermoplastic starch (TPS), poly(lactic) acid (PLA), and poly(butylene Succinate) (PBS) for food packaging applications. Frontiers in Chemistry, 8. pp. 1-12. ISSN 2296-2646

Asrofi, Mochamad and Sujito and Syafri, Edi and Salit, Mohd Sapuan and Rushdan, Ahmad Ilyas (2020) Improvement of biocomposite properties based tapioca starch and sugarcane bagasse cellulose nanofibers. Key Engineering Materials, 849. 96 - 101. ISSN 1013-9826; ESSN: 1662-9795

Azmi, Nazatul Shima and Kadir Basha, Roseliza and Tajul Arifin, Nurfatin Nabila and Othman, Siti Hajar and Mohammed, Mohd Afandi P. (2020) Functional properties of Tilapia’s fish scale gelatin film: effects of different type of plasticizers. Sains Malaysiana, 49 (9). 2221 - 2229. ISSN 0126-6039

Bachik, Nur Azizah and Hashim, Norhashila and Wayayok, Aimrun and Che Man, Hasfalina and Mohd Ali, Maimunah (2020) Optical imaging techniques for rice diseases detection: a review. Journal of Agricultural and Food Engineering, 1 (1). pp. 1-11. ISSN 2716-6236

Bajuri, Farid and Mazlan, Norkhairunnisa and Ishak, Mohamad Ridzwan and Uyup, M. K. A. (2020) Effect of impregnation on hybrid mesoporous silica / kenaf reinforced epoxy composites in term of flexural, compressive and water absorption properties. Journal of Mechanical Engineering and Sciences, 14 (4). 7528 - 7539. ISSN 2289-4659; ESSN: 2231-8380

Basri, Adi Azriff and Abdul Khader, Shah Mohammed and Johny, Cherian and Pai B, Raghuvir and Zuber, Mohammad and Ahmad, Zainuldin and Ahmad, Kamarul Arifin (2020) Effect of single and double stenosed on renal arteries of abdominal aorta: a computational fluid dynamics. CFD Letters, 12 (1). 87 - 97. ISSN 2180-1363

Basri, Adi Azriff and S. M., Abdul Khader and Johny, Cherian and Pai, Raghuvir and Zuber, Mohammed and Ahmad, Zainuldin and Ahmad, Kamarul Arifin (2020) Fluid structure interaction of renal arteries of abdominal aorta subjected to single and double stenosed complication. Malaysian Journal of Medicine and Health Sciences, 16 (suppl. 8). 35 - 41. ISSN 1675-8544; ESSN: 2636-9346

Basri, Adi Azriff and Zuber, Mohammad and Basri, Ernnie Illyani and Zakaria, Muhammad S. and Aziz, Ahmad F. A. and Tamagawa, Masaaki and Ahmad, Kamarul Arifin (2020) Fluid structure interaction on paravalvular leakage of transcatheter aortic valve implantation related to aortic stenosis: a patient-specific case. Computational and Mathematical Methods in Medicine, 2020. art. no. 9163085. pp. 1-22. ISSN 1748-670X; ESSN: 1748-6718

Basri, Hasbullah Hassan and A. Talib, Rosnita and Sukor, Rashidah and Othman, Siti Hajar and Ariffin, Hidayah (2020) Effect of synthesis temperature on the size of ZnO nanoparticles derived from pineapple peel extract and antibacterial activity of ZnO–starch nanocomposite films. Nanomaterials, 10 (6). art. no. 1061. pp. 1-15. ISSN 2079-4991

Behmanesh, Mohammad and Tang, Sai Hong and Mohd Kassim, Muhamad Saufi and Azim Farhad, Arsalan and Dashtizadeh, Zahra (2020) A brief survey on agricultural robots. International Journal of Mechanical Engineering and Robotics Research, 6 (3). 178 - 182. ISSN 2278-0149

Bobba, Sujith and Z., Leman and E. S., Zainudin and Salit, Mohd Sapuan (2020) Low velocity impact and internal pressure behaviors of unaged E-glass and S-glass/epoxy composite elbow pipe joints. Journal of Pipeline Systems Engineering and Practice, 11 (4). pp. 1-14. ISSN 1949-1190; ESSN: 1949-1204

Camara, Moriken and Jamil, Nor Rohaizah and Abdullah, Ahmad Fikri and Hashim, Rohasliney and Aliyu, Adamu Gaddafi (2020) Economic and efficiency based optimisation of water quality monitoring network for land use impact assessment. Science of The Total Environment, 737. art. no. 139800. pp. 1-14. ISSN 0048-9697; ESSN: 1879-1026

Chai, K. L. and Noor, I. M. and Aung, Min Min and Abdullah, Luqman Chuah and Kufian, M. Z. (2020) Non-edible oil based polyurethane acrylate with tetrabutylammonium iodide gel polymer electrolytes for dye-sensitized solar cells. Solar Energy, 208. 457 - 468. ISSN 0038-092X

Chan, H. M. and Nyam, Kar Lin and Yusof, Yus Aniza and Pui, Liew Phing (2020) Investigation of properties of polysaccharide-based edible film incorporated with functional Melastoma malabathricum extract. Carpathian Journal of Food Science and Technology, 12 (1). 120 - 134. ISSN 2066-6845

Che Man, Hasfalina and Xie, Chai Yun and Md. Yunos, Khairul Faezah and Mohammed, Abdulsalam and Hamzah, Muhammad Hazwan (2020) Optimizing hydrogen production from the Landfill Leachate by electro-coagulation technique. Journal of Agricultural and Food Engineering, 1 (3). pp. 1-7. ISSN 2716-6236

Che Me, Rosalam and Ahmad, Faisul Arif and Sulaiman, Ruhaizin and Kamarudin, Khairul Manami and Alli, Hassan and Saion, Indastri (2020) Non-intrusive, visual-less wearable haptic stimuli navigational assistance for elderly with dementia. Malaysian Journal of Public Health Medicine, 20 (spec. 1). 128 - 137. ISSN 1675-0306; ESSN: 2590-3829

Che Soh@ Shaari, Syirrazie and Othman, Mohammad Lutfi and Hizam, Hashim and NY, Dahlan and Chik, Mohd Hanafiah and Yahaya, Mohamad Suhaimi and Abu Bakar, Hamizah and Zainal Anuar, Suhafizudin and Amir, Zulhelmi (2020) Analysis potential benefit of energy cost the chiller plant operation engaging with tariff scheme. Journal of Physics: Conference Series, 1529. art. no. 052056. pp. 1-10. ISSN 1742-6588; ESSN: 1742-6596

Che Yusof, Nik Syamsul Bahari and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad (2020) Conceptual design of oil palm fibre reinforced polymer hybrid composite automotive crash box using integrated approach. Journal of Central South University, 27 (1). 64 - 75. ISSN 2095-2899; ESSN: 2227-5223

Chikwendu, Onwude Daniel Iroemeha and Hashim, Norhashila and Dana, A. (2020) Backscattering imaging as a monitoring system for moisture content and colour changes in pumpkin during drying process. ASM Science Journal, 13 (4). 27 - 35. ISSN 1823-6782

Chilabi, Haider Jaafar and Salleh, Hanim and Supeni, Eris Elianddy and As'arry, Azizan and Md Rezali, Khairil Anas and Atrah, Ahmed B. (2020) Harvesting energy from planetary gear using piezoelectric material. Energies, 13 (1). art. no. 223. pp. 1-25. ISSN 1996-1073

Chng, Ming Hui and W. M., Chin and Tang, Sai Hong (2020) Analysis on the refrigerant (R32) flow maldistribution of microchannel heat exchanger under superheat and sub-cool. International Journal of Automotive and Mechanical Engineering, 14 (2). 4140 - 4157. ISSN 2229-8649; ESSN: 2180-1606

Choo, Thye Foo and Mohd Salleh, Mohamad Amran and Kok, Kuan Ying and Matori, Khamirul Amin and Abdul Rashid, Suraya (2020) Characterization of high-temperature hierarchical porous mullite washcoat synthesized using aluminum dross and coal fly ash. Crystals, 10 (3). art. no. 178. pp. 1-11. ISSN 2073-4352

Choo, Thye Foo and Mohd Salleh, Mohamad Amran and Kok, Kuan Ying and Matori, Khamirul Amin and Abdul Rashid, Suraya (2020) Effect of temperature on morphology, phase transformations and thermal expansions of coal fly ash cenospheres. Crystals, 10 (6). art. no. 481. pp. 1-11. ISSN 2073-4352

Choo, Thye Foo and Mohd Salleh, Mohamad Amran and Kuan, Ying Kok and Matori, Khamirul Amin and Abdul Rashid, Suraya (2020) A study on the utilization of coal fly ash derived Grog in clay ceramics. Materials, 13 (22). pp. 1-12. ISSN 1996-1944

Ebrahim, Mohammad Nazri and Mohamed Zawawi, Mohamed Azwan and Kamal, Md. Rowshon and Khairudin, Nurulhuda (2020) Evaluation of groundwater recharge based on climate change: a case study at Baung’s Watershed, Kota Bharu, Kelantan. Sains Malaysiana, 49 (11). 2649 - 2658. ISSN 0126-6039

Eissa, Magdy Abdullah and Sali, Aduwati and Hassan, Mohd Khair and Bassiuny, A. M. and Darwish, Rania R. (2020) Observer-based fault detection with fuzzy variable gains and its application to industrial servo system. IEEE Access, 8. 131224 - 131238. ISSN 2169-3536

Elseknidy, Mohamed Hamdy and Ali, Salmiaton and Ishak, Nor Shafizah and Saad, Ahmed Hassan (2020) A study on mechanical properties of concrete incorporating aluminum dross, fly ash, and quarry dust. Sustainability, 12 (21). pp. 1-13. ISSN 2071-1050

Elsoragaby, Suha Gaafar Babekir and Yahya, Azmi and Mat Nawi, Nazmi and Mahadi @ Othman, Muhammad Razif and Mairghany, Modather and A., Muazu and Mohamad Shukery, Mohamad Firdza (2020) Comparison between conventional human energy measurement and physical human energy measurement methods in wetland rice production. Heliyon, 6 (11). art. no. 05332. pp. 1-8. ISSN 2405-8440

El‑Zeadan, Mohamed and Muhammad Rashid, Raizal Saifulnaz and Hussein Amran, Mugahed Yahya and Swi, Mohamed Ibrahem (2020) Effect of the plate bondstress-slip property on the fexural strength of FRP Plated RC beams using a displacement-based approach. SN Applied Sciences, 2. art. no. 1925. pp. 1-23. ISSN 2523-3971; ESSN: 2523-3963

Ethaib, Saleem and Omar, Rozita and Mustapa Kamal, Siti Mazlina and Awang Biak, Dayang Radiah (2020) Evaluation of the interactive effect pretreatment parameters via three types of microwave-assisted pretreatment and enzymatic hydrolysis on sugar yield. Processes, 8 (7). pp. 1-17. ISSN 2227-9717

Ethaib, Saleem and Omar, Rozita and Mustapa Kamal, Siti Mazlina and Awang Biak, Dayang Radiah and Zubaidi, Salah L. (2020) Microwave-assisted pyrolysis of biomass waste: a mini review. Processes, 8 (9). art. no. 1190. pp. 2-17. ISSN 2227-9717

Farade, Rizwan A. and Abdul Wahab, Noor Izzri and Mansour, Diaa-Eldin A. and Azis, Norhafiz and Jasni, Jasronita and N. R., Banapurmath and Soudagar, Manzoore Elahi M. (2020) Investigation of the dielectric and thermal properties of non-edible cottonseed oil by infusing h-BN nanoparticles. IEEE Access, 8. 76204 - 76217. ISSN 2169-3536

Farade, Rizwan A. and Abdul Wahab, Noor Izzri and Mansour, Diaa-Eldin A. and Azis, Norhafiz and Jasni, Jasronita and Soudagar, Manzoore Elahi M. and Siddappa, Vasudevamurthy (2020) Development of graphene oxide-based nonedible cottonseed nanofluids for power transformers. Materials, 13 (11). art. no. 2569. pp. 1-16. ISSN 1996-1944

Farahani, Hamid and Wagiran, Rahman and Urban, Gerald A. (2020) Investigation of room temperature protonic conduction of perovskite humidity sensors. IEEE Sensors Journal, 21 (8). pp. 9657-9666. ISSN 1530-437X; ESSN: 1558-1748

Fernandez, Ibai Gorordo and Kitagawa, Kodai and Abdul Rahman, Kawthar and Che Soh, Azura and Alpha, Agape Gopalai and Ahmad, Siti Anom and Wada, Chikamune (2020) Linear regression technique for improvement of feet position estimation during standing balance using a cane with millimeter wave radar. Pertanika Journal of Science & Technology, 28 (spec. 2). pp. 71-81. ISSN 0128-7680; ESSN: 2231-8526

Fernandez, Ibai Gorordo and Kitagawa, Kodai and Abdul Rahman, Kawthar and Che Soh, Azura and Gopalai, Alpha Agape and Ahmad, Siti Anom and Wada, Chikamune (2020) Linear regression technique for improvement of feet position estimation during standing balance using a cane with millimeter wave radar. Pertanika Journal of Science and Technology, 28 (spec. 2). pp. 71-81. ISSN 0128-7680; ESSN: 2231-8526

Fuwa, Yasuhiro and Wan Hasan, Wan Zuha and Yamada, Hiroshi (2020) Measurement and finite element analysis of the load-dependent pressure redistribution behavior of various types of mattresses. Journal of Mechanics in Medicine and Biology, 20 (5). pp. 1-15. ISSN 0219-5194; ESSN:1793-6810

Ghafari, Mehdi and Nahazanan, Haslinda and Md Yusoff, Zainuddin and Nik Daud, Nik Norsyahariati (2020) A novel experimental study on the effects of soil and faults properties on tunnels induced by normal and reverse faults. Applied Sciences-Basel, 10 (11). pp. 1-16. ISSN 2076-3417

Ghamarian, Nima and Mohamed Ariff, Azmah Hanim and Zainal, Zulkarnain and Lim, Hong Ngee (2020) Electrical and corrosion characterisation of nano-composite eutectic Bi-Ag solder alloy reinforced with multi-wall carbon nanotube and multi-layer graphene. SVOA Materials Science & Technology, 2 (3). 62 - 75. ISSN 2634-5331

Ghazali, Anith Khairunnisa and Hassan, Mohd Khair and Mohd Radzi, Mohd Amran and As'arry, Azizan (2020) Electric vehicle with sliding mode control super-twisting control strategy. Journal of Physics: Conference Series, 1432. pp. 1-6. ISSN 1742-6588; ESSN: 1742-6596

Ghazali, Anith Khairunnisa and Hassan, Mohd Khair and Mohd Radzi, Mohd Amran and As'arry, Azizan (2020) Integrated braking force distribution for electric vehicle regenerative braking system. Pertanika Journal of Science and Technology, 28 (spec. 2). pp. 173-182. ISSN 0128-7680; ESSN: 2231-8526

Ghazali, Anith Khairunnisa and Hassan, Mohd Khair and Mohd Radzi, Mohd Amran and As'arry, Azizan (2020) Sliding mode control optimization method using fuzzy-gain scheduling for regenerative braking system. Journal of Advanced Research in Dynamical and Control Systems, 12 (4 spec.). 1504 - 1509. ISSN 1943-023X

Ghazali, Anith Khairunnisa and Hassan, Mohd Khair and Mohd Radzi, Mohd Amran and As’arry, Azizan (2020) Integrated braking force distribution for electric vehicle regenerative braking system. Pertanika Journal of Social Science and Humanities, 28 (spec.2). pp. 1-10. ISSN 0128-7680; ESSN: 2231-8526

Gibril, Mohamed Barakat A. and Kalantar, Bahareh and Al-Ruzouq, Rami and Ueda, Naonori and Saeidi, Vahideh and Shanableh, Abdallah and Mansor, Shattri and Mohd Shafri, Helmi Zulhaidi (2020) Mapping heterogeneous urban landscapes from the fusion of digital surface model and unmanned aerial vehicle-based images using adaptive multiscale image segmentation and classification. Remote Sensing, 12 (7). art. no. 1081. pp. 1-27. ISSN 2072-4292

Girei, Saad Hayatu and Lim, Hong Ngee and Ahmad, Muhammad Zamharir and Mahdi, Mohd Adzir and Md Zain, Ahmad Rifqi and Yaacob, Mohd Hanif (2020) High sensitivity microfiber interferometer sensor in aqueous solution. Sensors, 20 (17). pp. 1-9. ISSN 1424-3210; ESSN: 1424-8220

Gomez, Javier Hernando Chavarro and Zakaria, Rabitah and Min, Min Aung and Mokhtar, Mohd Noriznan and Yunus, Robiah (2020) Characterization of novel rigid-foam polyurethanes from residual palm oil and algae oil. Journal of Materials Research and Technology-JMR&T, 9 (6). 16303 - 16316. ISSN 2238-7854

Hajjaj, Sami Salama Hussen and Hameed Sultan, Mohamed Thariq and Moktar, Muhammad Hafizuddin and Lee, Seng Hua (2020) Utilizing the internet of things (IoT) to develop a remotely monitored autonomous floodgate for water management and control. Water, 12 (2). art. no. 502. pp. 1-18. ISSN 2073-4441

Hameed, Husamuldeen Khalid and Wan Hasan, Wan Zuha and Shafie, Suhaidi and Ahmad, Siti Anom and Jaafar, Haslina and Inche Mat, Liyana Najwa (2020) Detection of muscle activities in the sEMG signal by using frequency features and adaptive decision threshold. Pertanika Journal of Science and Technology, 28 (spec. 2). pp. 1-11. ISSN 0128-7680; ESSN: 2231-8526

Hameed, Husamuldeen Khalid and Wan Hasan, Wan Zuha and Shafie, Suhaidi and Ahmad, Siti Anom and Jaafar, Haslina and Inche Mat, Liyana Najwa (2020) Detection of muscle activities in the sEMG signal by using frequency features and adaptive decision threshold. Pertanika Journal of Science & Technology, 28 (spec. 2). pp. 1-11. ISSN 0128-7680; ESSN: 2231-8526

Hameed, Husamuldeen Khalid and Wan Hasan, Wan Zuha and Shafie, Suhaidi and Ahmad, Siti Anom and Jaafar, Haslina and Inche Mat, Liyana Najwa (2020) Investigating the performance of an amplitude-independent algorithm for detecting the hand muscle activity of stroke survivors. Journal of Medical Engineering & Technology, 44 (3). pp. 139-148. ISSN 0309-1902; ESSN: 1464-522X

Hameed Kamil, Faten and Ali, Salmiaton and Raja Shahruzzaman, Raja Mohamad Hafriz and Hussien, Intesar Rezaq and Omar, Rozita (2020) Characterization and application of molten slag as catalyst in pyrolysis of waste cooking oil. Bulletin of Chemical Reaction Engineering and Catalysis, 15 (1). 119 - 127. ISSN 1978-2993

Hamzah, Muhammad Hazwan and Bowra, Steve and Cox, Philip (2020) Effects of ethanol concentration on organosolv lignin precipitation and aggregation from Miscanthus x giganteus. Processes, 8 (7). art. no. 845. pp. 1-17. ISSN 2227-9717

Hamzah, Muhammad Hazwan and Bowra, Steve and Cox, Philip (2020) Purity and structural composition of lignin isolated from Miscanthus x giganteus by sub-critical water extraction with associated modifiers. Journal of Agricultural and Food Engineering, 1. pp. 1-12. ISSN 2716-6236

Hamzah, Muhammad Hazwan and Khairudin, Nurulhuda and Mohd Mustafah, Anas and Jahari, Mahirah and Jamaludin, Diyana (2020) STEM enculturation in agricultural engineering: the needs for government, academia, industry and community collaborations. Advances in Agricultural and Food Research Journal, 1 (1). pp. 1-4. ISSN 2735-1084

Hanasil, Nur Syaida and Raja Ibrahim, Raja Kamarulzaman and Duralim, Maisarah and Sapingi, Husni Hani Jameela and Mahdi, Mohd Adzir (2020) Signal enhancement evaluation of laser-induced breakdown spectroscopy of extracted animal fats using principal component analysis approach. Applied Spectroscopy, 74 (12). 1452 - 1462. ISSN 0003-7028; ESSN: 1943-3530

Hanipah, Suhaiza Hanim and Omar, Farah Nadia and Talib, Ahmad Tarmezee and Mohammed, Mohd Afandi P. and Baharuddin, Azhari Samsu and Wakisaka, Minato (2020) Effect of silica bodies on oil palm fibre-polyethylene composites. BioResources, 15 (1). 360 - 367. ISSN 1930-2126

Harun, Nur Haninah and Zainal Abidin, Zurina and Abdullah, Abdul Halim and Othaman, Rizafizah (2020) Sustainable Jatropha oil-based membrane with graphene oxide for potential application in Cu(II) ion removal from aqueous solution. Processes, 8 (2). art. no. 230. pp. 1-22. ISSN 2227-9717

Hassan, Mohamad Zaki and Roslan, Siti Amni and Salit, Mohd Sapuan and A. Rasid, Zainudin and Mohd Nor, Ariff Farhan and Md Daud, Mohd Yusof and Dolah, Rozzeta and Mohamed Yusoff, Mohd Zuhri (2020) Mercerisation optimization of bamboo (Bambusa vulgaris) fibre reinforced epoxy composite structures using Box-Behnken design. Polymers, 12 (6). pp. 1-19. ISSN 2073-4360

Hassan, Mohamad Zaki and Salit, Mohd Sapuan and A. Rasid, Zainudin and Mohd Nor, Ariff Farhan and Dolah, Rozzeta and Md Daud, Mohd Yusof (2020) Impact damage resistance and post-impact tolerance of optimum banana-pseudo-stem-fiber-reinforced epoxy sandwich structures. Applied Sciences, 10 (2). art. no. 684. pp. 1-22. ISSN 2076-3417

Hassani, Abdelkader and Sabaghpour Azarian, Mohammad Mahdi and Ibrahim, Wisam Nabeel and Hussain, Siti Aslina (2020) Preparation, characterization and therapeutic properties of gum Arabic-stabilized gallic acid nanoparticles. Scientific Reports, 10. art. no. 17808. pp. 1-18. ISSN 2045-2322

Hassani, Abdelkader and Syed Mahmood and Enezei, Hamid Hammad and Hussain, Siti Aslina and Hamad Ali, Ali and Aldoghachi, Ahmed Faris and Hagar, Abdullah and Doolaanea, Abd Almonem and Ibrahim, Wisam Nabeel (2020) Formulation, characterization and biological activity screening of sodium alginate-gum Arabic nanoparticles loaded with curcumin. Molecules, 25 (9). pp. 1-21. ISSN 1420-3049

Hilo, Ali Kareem and Abu Talib, Abd Rahim and Iborra, Antonio Acosta and Hameed Sultan, Mohamed Thariq and Abdul Hamid, Mohd Faisal (2020) Effect of corrugated wall combined with backward-facing step channel on fluid flow and heat transfer. Energy, 190. art. no. 116294. pp. 1-10. ISSN 0360-5442; ESSN: 1873-6785

Hilo, Ali Kareem and Abu Talib, Abd Rahim and Iborra, Antonio Acosta and Hameed Sultan, Mohamed Thariq and Abdul Hamid, Mohd Faisal (2020) Experimental study of nanofluids flow and heat transfer over a backward-facing step channel. Powder Technology, 372. 497 - 505. ISSN 0032-5910; ESSN: 1873-328X

Hossain, Md Imam and Ahmad, Khairulmazmi and Siddiqui, Yasmeen and Saad, Norsazilawati and Rahman, Ziaur and Haruna, Ahmed Osumanu and Bejo, Siti Khairunniza (2020) Current and prospective strategies on detecting and managing Colletotrichumfalcatum causing red rot of sugarcane. Agronomy, 10 (9). art. no. 1253. pp. 1-19. ISSN 2073-4395; ESSN: 2073-4395

How, Darren Jin Aik and Ismail, Mohd Hasmadi and Muharam, Farrah Melissa (2020) Land use/land cover changes and the relationship with land surface temperature using landsat and MODIS imageries in Cameron Highlands, Malaysia. Land, 9 (10). pp. 1-23. ISSN 2073-445X

Ibrahim, Mohamed Ibrahim J. and Salit, Mohd Sapuan and Zainudin, Edi Syams and Mohamed Yusoff, Mohd Zuhri (2020) Preparation and characterization of cornhusk/sugar palm fiber reinforced cornstarch-based hybrid composites. Journal of Materials Research and Technology, 9 (1). 200 - 211. ISSN 2238-7854

Idan, Zinah N. and Abdulhussain, Sadiq H. and Al-Haddad, Syed Abdul Rahman (2020) A new separable moments based on Tchebichef-Krawtchouk polynomials. IEEE Access, 8. 41013 - 41025. ISSN 2169-3536

Idris, S. and S., Rosnah and M. Z. M., Nor and Mokhtar, M. N. and Abdul Gani, S. S. (2020) Physicochemical composition of different parts of cassava (Manihot esculenta Crantz) plant. Food Research, 4 (supp.1). 78 - 84. ISSN 2550-2166

Idrus, Nor Faeqah and Yunus, Robiah and Zainal Abidin, Zurina and Rashid, Umer and Abd Rahman, Norazah (2020) High oleic pentaerythritol tetraester formation via transesterification: Effect of reaction conditions. Indonesian Journal of Chemistry, 20 (4). 887 - 898. ISSN 1411-9420; ESSN: 2460-1578

Ijaz, Bazgha and Hanif, Muhammad Asif and Rashid, Umer and Zubair, Muhammad and Mushtaq, Zahid and Nawaz, Haq and Shean, Thomas Yaw Choong and Nehdi, Imededdine Arbi (2020) High vacuum fractional distillation (HVFD) approach for quality and performance improvement of Azadirachta indica biodiesel. Energies, 13 (11). pp. 1-14. ISSN 1996-1073

Iqbal, Mazhar and Kamal, Md. Rowshon and Mail, Mohd Fazly and Che Man, Hasfalina and Wayayok, Aimrun (2020) HYDRUS-1D simulation of soil water dynamics for sweet corn under tropical rainfed condition. Applied Sciences, 10 (4). art. no. 1219. pp. 1-17. ISSN 2076-3417

Iqbal, Mazhar and Kamal, Md. Rowshon and Mohd Soom, Mohd Amin and Yamin, Muhammad and M., Mohd Fazly and Che Man, Hasfalina and Muhammed, Hadi Hamaaziz (2020) HYDRUS-1D simulation of nitrogen dynamics in rainfed sweet corn production. Applied Sciences, 10 (11). pp. 1-15. ISSN 2076-3417

Isaak, Momtaz and Yahya, Azmi and Razif, Muhammad and Mat Nawi, Nazmi (2020) Mechanization status based on machinery utilization and worker's workload in sweet corn cultivation in Malaysia. Computers and Electronics in Agriculture, 169. art. no. 105208. pp. 1-7. ISSN 0168-1699; ESSN: 1872-7107

Ishak, Farah Diana and Romli, Fairuz Izzudin (2020) Conceptual design alternatives for new in-flight food delivery and waste collection system in commercial transport aircraft. International Journal of Advanced Science and Technology, 29 (4). 10165 - 10175. ISSN 2005-4238

Ishak, Farah Diana and Romli, Fairuz Izzudin and Harmin, Mohammad Yazdi and Mohd Rafie, Azmin Shakrine (2020) Design requirements for new food delivery and waste collection system onboard commercial transport aircraft. International Journal of Innovative Technology and Exploring Engineering, 9 (3). 2207 - 2212. ISSN 2278-3075

Ishak, Nur Arnisah and Ab Razak, Nor Asma and Pak Dek, Mohd Sabri and Samsu Baharuddin, Azhari (2020) Production of high tannin content and antioxidant activity extract from an unripe peel of Musa acuminata (Cavendish) using ultrasound-assisted extraction (UAE). BioResources, 15 (1). 1877 - 1893. ISSN 1930-2126

Islam, Mohammad Zohrul and Abdul Wahab, Noor Izzri and Veerasamy, Veerapandiyan and Hizam, Hashim and Mailah, Nashiren Farzilah and Guerrero, Josep M. and Mohd Nasir, Mohamad Nasrun (2020) A Harris hawks optimization based single- and multi objective optimal power flow considering environmental emission. Sustainability, 12 (13). pp. 1-27. ISSN 2071-1050

Islam, Syed Zahurul and Othman, Mohammad Lutfi and Mariun, Norman and Hizam, Hashim and Jalaluddin, Nur Ayuni (2020) Feasibility analysis of standalone PV powered battery using SEN for Smart Grid. International Journal of Power Electronics and Drive System, 11 (2). 667 - 676. ISSN 2088-8694; ESSN: 2722-256X

Ismail, Asmida and Ahmad, Siti Anom and Che Soh, Azura and Hassan, Mohd Khair and Harith, Hazreen Haizi (2020) Deep learning object detector using a combination of Convolutional Neural Network (CNN) architecture (MiniVGGNet) and classic object detection algorithm. Pertanika Journal of Science and Technology, 28 (spec. 2). pp. 161-172. ISSN 0128-7680; ESSN: 2231-8526

Ismail, Asmida and Ahmad, Siti Anom and Che Soh, Azura and Hassan, Mohd Khair and Harith, Hazreen Haizi (2020) MYNursingHome: a fully-labelled image dataset for indoor object classification. Data in Brief, 32. art. no. 106268. pp. 1-6. ISSN 2352-3409

Ismail, Ezzatul Irraida and Ahmad, Fauzan and Shafie, Suhaidi and Yahaya, Ahmad Hafizal and Abd Latif, Amirah and Muhammad, Farah Diana (2020) Copper nanowires based mode-locker for soliton nanosecond pulse generation in erbium-doped fiber laser. Results in Physics, 18. art. no. 103228. pp. 1-6. ISSN 2211-3797

Ismail, Habibu and Kamal, Md Rowshon and Lai, Sai Hin and Abdullah, Ahmad Fikri (2020) Performance of HEC-HMS and ArcSWAT models for assessing climate change impacts on streamflow at Bernam River Basin in Malaysia. Pertanika Journal of Science & Technology, 28 (3). pp. 1027-1048. ISSN 0128-7680; ESSN: 2231-8526

Ismail, Habibu and Kamal, Md. Rowshon and Abdullah, Ahmad Fikri and Mohd, Mohd Syazwan Faisal (2020) Climate-smart agro-hydrological model for a large scale rice irrigation scheme in Malaysia. Applied Sciences-Basel, 10 (11). pp. 1-22. ISSN 2076-3417

Ismail, Habibu and Kamal, Md. Rowshon and Lai, Sai Hin and Abdullah, Ahmad Fikri (2020) Performance of HEC-HMS and ArcSWAT models for assessing climate change impacts on streamflow at Bernam River Basin in Malaysia. Pertanika Journal of Science and Technology, 28 (3). pp. 1027-1048. ISSN 0128-7680; ESSN: 2231-8526

Ismail, Siti Amni and Yahya, Azmi and Mat Su, Ahmad Suhaizi and Asib, Norhayu and Mohd Mustafah, Anas (2020) Design and development of an indoor testing facility for downwash and spray distribution evaluations of agricultural UAV. Advances in Agricultural and Food Reserach Journal, 1 (2). pp. 1-14. ISSN 2666-1543

Ismail, Zuliana and Varatharajoo, Renuganth and Chak, Yew Chung (2020) A fractional-order sliding mode control for nominal and underactuated satellite attitude controls. Advances in Space Research, 66 (2). 321 - 334. ISSN 0273-1177

Issa, Mohammed Abdullah and Zainal Abidin, Zurina and Pudza, Musa Yahaya and Zentou, Hamid (2020) Efficient removal of Cu(II) from aqueous systems using enhanced quantum yield nitrogen-doped carbon nanodots. RSC Advances, 10 (25). pp. 14979-14990. ISSN 2046-2069

Issa, Mohammed Abdullah and Zainal Abidin, Zurina and Sobri, Shafreeza and Abdul Rashid, Suraya and Mahdi, Mohd Adzir and Ibrahim, Nor Azowa (2020) Fluorescent recognition of Fe3+ in acidic environment by enhanced-quantum yield N-doped carbon dots: optimization of variables using central composite design. Scientific Reports, 10. art. no. 11710. pp. 1-18. ISSN 2045-2322

Issa, Mohammed Abdullah and Zainal Abidin, Zurina and Sobri, Shafreeza and Abdul-Rashid, Suraya and Mahdi, Mohd Adzir and Ibrahim, Nor Azowa and Pudza, Musa Yahaya (2020) Fabrication, characterization and response surface method optimization for quantum efficiency of fluorescent nitrogen-doped carbon dots obtained from carboxymethylcellulose of oil palms empty fruit bunch. Chinese Journal of Chemical Engineering, 28 (2). 584 - 592. ISSN 1004-9541

Jahil, Mustafa Mudhafar and Zainol, Ismail and Jaafar, C. N. Aiza and H. A., Alsailawi and Majhool, Alhussein Arkan (2020) Two green synthesis methods to prepared nanoparticles of Ag-two sizes and shapes via using extract of M. dubia leaves. Journal of Computational and Theoretical Nanoscience, 17 (7). pp. 2882-2889. ISSN 1546-1955; ESSN: 1546-1963

Jalasabri, Jafirdaus and Romli, Fairuz Izzuddin and Harmin, Mohammad Yazdi (2020) Mathematical modelling for effects of fineness ratio, altitude and velocity on aerodynamic characteristics of an airship design using computational fluid dynamics. CFD Letters, 12 (10). 90 - 110. ISSN 2180 - 1363

Jamaludin, Norhanisah and Tan, Tong Ling and Kamarol Zaman, Alif Syafiq and Sadrolhosseini, Amir Reza and Abdul Rashid, Suraya (2020) Acid-free hydrothermal-extraction and molecular structure of carbon quantum dots derived from empty fruit bunch biochar. Materials, 13 (15). art. no. 3356. pp. 1-23. ISSN 1996-1944

Jamar, Azifah and Anuar, Mohd Shamsul and Mohd Tahir, Suraya (2020) Frictional effects, mechanical strength, and disintegration of coffee mix tablet, effervescent coffee mix tablet and with added lubricant. Particulate Science and Technology, 38 (7). 892 - 897. ISSN 0272-6351; ESSN: 1548-0046

Jeevanandam, Jaison and Harun, Mohd Razif and Lau, Sie Yon and Sewu, Divine D. and Danquah, Michael K. (2020) Microalgal biomass generation via electroflotation: a cost-effective dewatering technology. Applied Sciences, 10 (24). pp. 1-24. ISSN 2076-3417

Jumaidin, Ridhwan and Khiruddin, Muhammad Afif Akmal and Saidi, Zulhelmi Asyul Sutan and Salit, Mohd Sapuan and Rushdan, Ahmad Ilyas (2020) Effect of cogon grass fibre on the thermal, mechanical and biodegradation properties of thermoplastic cassava starch biocomposite. International Journal of Biological Macromolecules, 146. 746 - 755. ISSN 0141-8130; ESSN: 1879-0003

K. C. Mani, Kulanthayan and Teow, Hui Fang and Tamil Selvan, Hari Krishnan and Yellappan, Kaviyarasu and Ulaganathan, Vaidehi (2020) Determinants of standard motorcycle safety helmet usage among child pillion riders. Transportation Research Part F: Traffic Psychology and Behaviour, 74 (1). 408 - 417. ISSN 1369-8478; ESSN: 1873-5517

Kadota, Kazunori and Ibe, Toi and Sugawara, Yuto and Takano, Hitomi and Yusof, Yus Aniza and Uchiyama, Hiromasa and Tozuka, Yuichi and Yamanaka, Shinya (2020) Water-assisted synthesis of mesoporous calcium carbonate with a controlled specific surface area and its potential to ferulic acid release. RSC Advances, 10 (47). 28019 - 28025. ISSN 2046-2069

Kaky, Kawa M. and Sayyed, M. I. and Ati, Ali A. and Mhareb, M. H. A. and Mahmoud, K. A. and Omar Baki, Sharudin and Mahdi, Mohd Adzir (2020) Germanate oxide impacts on the optical and gamma radiation shielding properties of TeO2-ZnO-Li2O glass system. Journal of Non-Crystalline Solids, 546. art. no. 120272. pp. 1-9. ISSN 0022-3093

Kaky, Kawa M. and Sayyed, M. I. and Mhareb, M. H. A. and Abdalsalam, Alyaa H. and Mahmoud, K. A. and Omar Baki, Sharudin and Mahdi, Mohd Adzir (2020) Physical, structural, optical and gamma radiation attenuation properties of germanate-tellurite glasses for shielding applications. Journal of Non-Crystalline Solids, 545. art. no. 120250. pp. 1-11. ISSN 0022-3093

Kamaroddin, Mohd Fadhzir Ahmad and Sabli, Nordin and Nia, Pooria Moozarm and Tuan Abdullah, Tuan Amran and Abdullah, Luqman Chuah and Izhar, Shamsul and Ripin, Adnan and Ahmad, Arshad (2020) Phosphoric acid doped composite proton exchange membrane for hydrogen production in mediumtemperature copper chloride electrolysis. International Journal of Hydrogen Energy, 45 (42). 22209 - 22222. ISSN 0360-3199

Kamaruddin, Fatin Amirah and Nahazanan, Haslinda and Kim Huat, Bujang and Anggraini, Vivi (2020) Improvement of marine clay soil using lime and alkaline activation stabilized with inclusion of treated coir fibre. Applied Sciences, 10 (6). art. no. 2129. pp. 1-16. ISSN 2076-3417

Kamaruddin, Fatin Amirah and Vivi Anggraini and Huat, Bujang Kim and Nahazanan, Haslinda (2020) Wetting/drying behaviour of lime and alkaline activation stabilized marine clay reinforced with modified coir fibre. Materials, 13 (12). art. no. 2753. pp. 1-10. ISSN 1996-1944

Kamaruddin, Z. H. and Sapuan, S. M. and Mohamed Yusoff, M. Z. and Jumaidin, R. (2020) Rapid detection and identification of Dioscorea compounds in Dioscorea hispada tuber plants by LC-ESI-MS. BioResources, 15 (3). pp. 5999-6011. ISSN 1930-2126

Kamarudin, Khairul Manami and Mohd Basri, Mohd Salahuddin and Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat (2020) Aerodynamic drag study of time-trial cycling helmets using CFD analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). 21 - 31. ISSN 2289-7879

Karpouzoglou, Timos and Dewulf, Art and Perez, Katya and Gurung, Praju and Regmi, Santosh and Isaeva, Aiganysh and Foggin, Marc and Bastiaensen, Johan and Hecken, Gert Van and Zulkafli, Zed and Mao, Feng and Clark, Julian and Hannah, David M. and Chapagain, Prem Sagar and Buytaert, Wouter and Cieslik, Katarzyna (2020) From present to future development pathways in fragile mountain landscapes. Environmental Science and Policy, 114. 606 - 613. ISSN 1462-9011; ESSN; 1873-6416

Kau, Zae Ting and Azlan, Azrina and Abu Bakar Sajak, Azliana and Khoo, Hock Eng and Chin, Nyuk Ling and M. F., Md Noh and N., Mustafa Khalid (2020) Comparison of selected local honey with Manuka honey based on their nutritional and antioxidant properties. Food Research, 4 (suppl. 1). 205 - 213. ISSN 2550-2166

Khairudin, Nurulhuda and Zakaria, Mohamad Pauzi and Struik, Paul C. and Keesman, Karel J. (2020) Equifinality in the modelling of ammonia volatilisation from a flooded rice system. Environmental Modelling and Software, 133. art. no. 104752. pp. 1-23. ISSN 1364-8152

Khaled, Alfadhl Yahya and Abd Aziz, Samsuzana and Bejo, Siti Khairunniza and Mat Nawi, Nazmi and Jamaludin, Diyana and Ibrahim, Nur Ul Atikah (2020) A comparative study on dimensionality reduction of dielectric spectral data for the classification of basal stem rot (BSR) disease in oil palm. Computers and Electronics in Agriculture, 170. art. no. 105288. pp. 1-9. ISSN 0168-1699

Khalid, Nurul Izzah and Ab Aziz, Norashikin and Mohd Thani, Nurfatimah and Shapi’i, Ruzanna and Abd Rahman, Nur Farhana (2020) Electrolyzed water as a sustainable cleaning and disinfection chemical for SMEs Malaysian meat processing food industries: challenges and uncertainties. Journal of Agricultural and Food Engineering, 1 (1). pp. 1-2. ISSN 2716-6236

Khalid Hameed, Husamuldeen and Wan Hasan, Wan Zuha and Shafie, Suhaidi and Ahmad, Siti Anom and Jaafar, Haslina (2020) Amplitude independent versus amplitude dependent muscle activity detection algorithms: a comparative study. Indonesian Journal of Electrical Engineering and Computer Science, 17 (2). 583 - 593. ISSN 2502-4752; ESSN: 2502-4760

Khan, Abdullah and Hizam, Hashim and Abdul Wahab, Noor Izzri and Othman, Mohammad Lutfi (2020) Optimal power flow using hybrid firefly and particle swarm optimization algorithm. PLoS One, 15 (8). pp. 1-30. ISSN 1932-6203

Kharraz, Osayd M. and M. J., Connelly and M. Supa'at, Abu Sahmah and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2020) Phase-mismatching dependence of four wave mixing effect in semiconductor optical amplifiers. Applied Optics, 59 (1). 77 - 83. ISSN 1559-128X; ESSN: 2155-3165

Kharraz, Osayd M. and M. J., Connelly and Supaat, Abu Sahmah and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2020) Influence of co- and counter-propagating light on the phase-mismatch effect in semiconductor optical amplifiers. Optics and Laser Technology, 125. art. no. 106032. pp. 1-7. ISSN 0030-3992

Khasib, Isam Adnan and Nik Daud, Nik Norsyahariati (2020) Physical and mechanical study of Palm Oil Fuel Ash (POFA) based geopolymer as a stabilizer for soft soil. Pertanika Journal of Science and Technology, 28 (spec. 2). pp. 149-160. ISSN 0128-7680; ESSN: 2231-8526

Khouzani, Mohammad Yadegari and Shamshiri, Redmond R. and Mohamed Shariff, Abdul Rashid and Balasundram, Siva Kumar and Mahns, Benjamin (2020) Using SPOT-7 for nitrogen fertilizer management in oil palm. Agriculture, 10 (4). art. no. 133. pp. 1-17. ISSN 2077-0472

Kirmasha, Yasir Khaleel and Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq (2020) Mechanical performance of unstitched and silk fiber-stitched woven kenaf fiber reinforced epoxy composites. Materials, 13 (21). pp. 1-14. ISSN 1996-1944

Koloor, Seyed Saeid Rahimian and Karimzadeh, Atefeh and Yidris, Noorfaizal and Petrů, Michal and Ayatollahi, Majid Reza and Tamin, Mohd Nasir (2020) An energy-based concept for yielding of multidirectional FRP composite structures using a mesoscale lamina damage model. Polymers, 12 (1). art. no. 157. pp. 1-18. ISSN 2073-4360

Kumar, Pavitra and Sai, Hin Lai and Jee, Khai Wong and Mohd, Nuruol Syuhadaa and Kamal, Md Rowshon and Afan, Haitham Abdulmohsin and Ahmed, Ali Najah and Sherif, Mohsen and Sefelnasr, Ahmed and El-Shafie, Ahmed (2020) Review of nitrogen compounds prediction in water bodies using artificial neural networks and other models. Sustainability, 12 (11). art. no. 4359. pp. 1-24. ISSN 2071-1050

Kumar, Pavitra and Sai, Hin Lai and Mohd, Nuruol Syuhadaa and Kamal, Md Rowshon and Afan, Haitham Abdulmohsin and Ahmed, Ali Najah and Sherif, Mohsen and Sefelnasr, Ahmed and El-shafie, Ahmed (2020) Optimised neural network model for river nitrogen prediction utilizing a new training approach. PLoS One, 15 (9). pp. 1-23. ISSN 1932-6203

Lalegani Dezaki, Mohammadreza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2020) Effects of CNC machining on surface roughness in Fused Deposition Modelling (FDM) products. Materials, 13 (11). pp. 1-28. ISSN 1996-1944

Lau, Kuen Yao and Mohd Yusoff, Norita and Abdul Hadi, Muhamad Amir Waliuddin and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2020) Generation of dark, Q-switched and bright pulses using erbium-ytterbium-thulium co-doped fiber. Optics and Laser Technology, 124. art. no. 105937. pp. 1-7. ISSN 0030-3992

Lee, Yun Ying and Elaine and Yusof, Yus Aniza and Pui, Lie Phing (2020) Development of milk protein edible films incorporated with Lactobacillus rhamnosus GG. BioResources, 15 (3). 6960 - 6973. ISSN 1930-2126

Liew, Chee Leong and Abu Talib, Abd Rahim and Indiran, Viji (2020) Professional pathway for civil aviation authority of Malaysia (CAAM) aircraft maintenance license holder registered at BEM. Journal of Aeronautics, Astronautics and Aviation, 52 (1). 105 - 114. ISSN 1990-7710

Liew, Mun Ngar and Kamuri, Mohd Firdaus and Zainal Abidin, Zurina (2020) Detection of chemicals using fiber optic microfluidic sensor. Test Engineering and Management, 82. 2003 - 2008. ISSN 0193-4120

Loganathan, Tamil Moli and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Ahsan, Qumrul and Naveen, Jesuarockiam and Perumal, Velu (2020) Characterization of new cellulosic Cyrtostachys renda and Ptychosperma macarthurii fibers from landscaping plants. Journal of Natural Fibers, 19 (2). pp. 669-684. ISSN 1544-0478; ESSN: 1544-046X

Loganathan, Tamil Moli and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Md Shah, Ain Umaira and Ahsan, Qumrul and Mariapan, Manohar and Abdul Majid, Mohd Shukry (2020) Physical, thermal and mechanical properties of areca fibre reinforced polymer composites — an overview. Journal of Bionic Engineering, 17. 185 - 205. ISSN 1672-6529; ESSN: 2543-2141

Lori, Erfan Shamsaddini and Ebrahimi, Farzad and Supeni, Eris Elianddy and Habibi, Mostafa and Safarpour, Hamed (2020) Frequency characteristics of a GPL-reinforced composite microdisk coupled with a piezoelectric layer. European Physical Journal Plus, 135. art. no. 144. pp. 1-32. ISSN 2190-5444

Lua, Hwee Ying and Naim, Mohd Nazli and P. Mohammed, Mohd Afandi and Hamidon, Fariza and Abu Bakar, Noor Fitrah (2020) Effects of ultrasonicated methylcellulose coating on French fries during deep frying process. Journal of Food Process Engineering, 43 (2). pp. 1-8. ISSN 0145-8876; ESSN: 1745-4530

M., Norhafana and M. M., Noor and F. Y., Hagos and Hairuddin, Abdul Aziz (2020) Diesel and various blending nanoparticles based diesel, fuel properties study. IOP Conference Series: Materials Science and Engineering, 788. art. no. 012061. pp. 1-9. ISSN 1757-8981; ESSN: 1757-899X

M., Noryani and S., M. Sapuan and M. T., Mastura and M. Y., M. Zuhri and Zainudin, E. S. (2020) Statistical inferences in material selection of a polymer matrix for natural fibre composites. Polimery, 65 (2). 105 - 115. ISSN 0032-2725

M. A. W., Abdul Hadi and Lau, Kuen Yao and Zainol Abidin, Nadiah Husseini and Omar Baki, Sharudin and Ng, E. K. and Lee, Han Kee and Mahdi, Mohd Adzir (2020) Investigation of tungsten trioxide as a saturable absorber for mode-locked generation. Optics and Laser Technology, 132. art. no. 106496. pp. 1-10. ISSN 0030-3992

Maghami, Mohammad Reza and Hassani, Rahman and Gomes, Chandima and Hizam, Hashim and Othman, Mohamad Lutfi and Behmanesh, Mohammad (2020) Hybrid energy management with respect to a hydrogen energy system and demand response. International Journal of Hydrogen Energy, 45 (3). 1499 - 1509. ISSN 0360-3199

Mahat, Siti Baizura and Omar, Rozita and Che Man, Hasfalina and Mohd Idris, Aida Isma and Mustapa Kamal, Siti Mazlina and Idris, Azni and Khairul Anuar, Norshafiqah (2020) Influence of substrate to inoculum ratio (S/I) on the treatment performance of food processing wastewater containing high oil and grease (O&G) in batch mode. Desalination and Water Treatment, 203. 267 - 278. ISSN 1944-3994; ESSN: 1944-3986

Mahat, Siti Baizura and Omar, Rozita and Jing, Ling Lee and Mohd Idris, Aida Isma and Che Man, Hasfalina and Mustapa Kamal, Siti Mazlina and Idris, Azni (2020) Effect of pore size of monofilament woven filter cloth as supporting material for dynamic membrane filtration on performance using aerobic membrane bioreactor technology. Asia-Pacific Journal of Chemical Engineering, 15 (3). art. no. 2453. pp. 1-12. ISSN 1932-2135; ESSN: 1932-2143

Mahdi, E. and Faraj, Munir and Hamouda, Abdel Magid Salem and Salit, Mohd Sapuan and Attia Hussein, Mohamed Ali and E. O., Eltai (2020) Effect of hexagonal on the in-plane crushing behaviour of plain weave composite hexagonal quadruple ring system. International Journal of Crashworthiness, 25 (2). 192 - 202. ISSN 1358-8265; ESSN: 1573-8965

Mahdizadeh, Hadi and Adam, Nor Mariah (2020) Numerical study of heat transfer in 90 bend tube by AL2O3 nanofluids using fluid injection. Journal of Engineering, Design and Technology, 19 (1). pp. 127-148. ISSN 1726-0531; ESSN: 1758-8901

Mahmood, Sarmad Nozad and Ishak, Asnor Juraiza and Ismail, Alyani and Che Soh, Azura and Zakaria, Zahriladha and Alani, Sameer (2020) ON-OFF body ultra-wideband (UWB) antenna for wireless body area networks (WBAN): a review. IEEE Access, 8. 150844 - 150863. ISSN 2169-3536

Makama, Abdullahi B. and Ali, Salmiaton and Choong, Thomas Shean Yaw and Abdul Hamid, Mohamad Rezi and Abdullah, Norhafizah and Saion, Elias (2020) Influence of parameters and radical scavengers on the visible-light-induced degradation of ciprofloxacin in ZnO/SnS 2 nanocomposite suspension: Identification of transformation products. Chemosphere, 253. art. no. 126689. pp. 1-9. ISSN 0045-6535

Malekbala, Mohamad Rasool and Soltani, Soroush and Abdul Rashid, Suraya and Abdullah, Luqman Chuah and Rashid, Umer and Nehdi, Imededdine Arbi and Choong, Thomas Shean Yaw and Teo, Siow Hwa (2020) Optimization the process of chemically modified carbon nanofiber coated monolith via response surface methodology for CO2 capture. Materials, 13 (7). art. no. 1775. pp. 1-24. ISSN 1996-1944

Mansor, Maisarah and Mohd Nawi, Afiqah and Zainol Abidin, Nadiah Husseini and Omar, Muhammad Firdaus and Mahdi, Mohd Adzir and Abu Bakar, Muhammad Hafiz (2020) Fiber twist-based wavelength tunability in tapered optical fiber filters. Pertanika Journal of Science and Technology, 28 (4). pp. 1267-1275. ISSN 0128-7680; ESSN: 2231-8526

Mansor, Maisarah and Mohd Nawi, Afiqah and Zainol Abidin, Nadiah Husseini and Omar, Muhammad Firdaus and Mahdi, Mohd Adzir and Abu Bakar, Muhammad Hafiz (2020) Fiber twist-based wavelength tunability in tapered optical fiber filters. Pertanika Journal of Science & Technology, 28 (4). pp. 1267-1275. ISSN 0128-7680; ESSN: 2231-8526

Maringgal, Bernard and Hashim, Norhashila and Mohamed Amin Tawakkal, Intan Syafinaz and Tengku Muda Mohamed, Mahmud and Hamzah, Muhammad Hazwan and Mohd Ali, Maimunah and Abd Razak, Mohd Faizol Haffiz (2020) Kinetics of quality changes in papayas (Carica papaya L.) coated with Malaysian stingless bee honey. Scientia Horticulturae, 267. pp. 1-11. ISSN 0304-4238

Maringgal, Bernard and Hashim, Norhashila and Tawakkal, Intan S. M. A. and Hamzah, Muhammad Hazwan and Mohamed, Mahmud Tengku Muda (2020) Biosynthesis of CaO nanoparticles using Trigona sp. Honey: physicochemical characterization, antifungal activity, and cytotoxicity properties. Journal of Materials Research and Technology-JMR&T, 9 (5). 11756 - 11768. ISSN 2238-7854; ESSN: 2214-0697

Masoud, Fathi and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Y., Nukman and Bayraktar, Emin (2020) Cutting processes of natural fiber reinforced polymer composites. Polymers, 12 (6). art. no. 1332. pp. 1-17. ISSN 2073-4360

Masroon, Mohamad Hairie and Mat Nawi, Nazmi and Yahya, Azmi and Mohamad Shukery, Mohamad Firdza (2020) Performance of mid-size combine harvester of grain corn on the field efficiency and energy consumption at the northern Johor of Malaysia. Pertanika Journal of Science & Technology, 28 (4). pp. 1277-1296. ISSN 0128-7680; ESSN: 2231-8526

Masroon, Mohamad Hairie and Mat Nawi, Nazmi and Yahya, Azmi and Mohamad Shukery, Mohamad Firdza and Salih Amin, Mohamed Ezzeldien (2020) Performance of mid-size combine harvester of grain corn on the field efficiency and energy consumption at the Northern Johor of Malaysia. Pertanika Journal of Science and Technology, 28 (4). pp. 1277-1296. ISSN 0128-7680; ESSN: 2231-8526

Masroon, Mohamad Hairie and Mat Nawi, Nazmi and Yahya, Azmi and Shukery, Mohamad Firdza and Salih Amin, Mohamed Ezzeldien (2020) Comparison of field performances between two typical mini combine harvesters in grain corn production. Journal of Agricultural And Food Engineering, 1 (3). art. no. 0022. pp. 1-6. ISSN 2716-6236

Mat Darus, Siti Atiqa Al Zahra and Ghazali, Mariyam Jameelah and Azhari, Che Husna and Zulkifli, Rozli and Shamsuri, Ahmad Adlie (2020) Mechanical properties of Gigantochloa scortechinii bamboo particle reinforced semirigid polyvinyl chloride composites. Jurnal Teknologi, 82 (2). 15 - 22. ISSN 2180-3722

Mat Johari, Amiruddin and Abd Rahman, Nur 'Aliaa and Samsu Baharuddin, Azhari and Kadir Basha, Roseliza and Wakisaka, Minato (2020) Effects of low temperature storage of Mastura (J37) jackfruit bulbs on the physical quality of jackfruit frozen confection. Journal of Agricultural and Food Engineering, 2. pp. 1-4. ISSN 2716-6236

Mat Johari, Amiruddin and Abd Rahman, Nur Aliaa and Baharuddin, Azhari Samsu and Kadir Basha, Roseliza and Mohammed, Mohd Afandi P. and Muhamad Parid, Dzieda and Abdul Razak, Siti Zubaidah and Wakisaka, Minato (2020) Effects of different low temperature storage conditions on the physico-chemical properties of Mastura (J37) jackfruit bulbs. Journal of Agricultural and Food Engineering, 1 (1). art. no. 0009. pp. 1-6. ISSN 2716-6236

Mat Lazim, Siti Saripa Rabiah and Mat Nawi, Nazmi and Masroon, Mohamad Hairie and Abdullah, Najidah and Che Mohammad Ishkandar El-Rahimin, Che Dini Maryani (2020) Adoption of IR4.0 into agricultural sector in Malaysia: potential and challenges. Advances in Agricultural and Food Research Journal, 1 (2). pp. 1-14. ISSN 2736-1799

Mat Radzi, Siti Fairuz and Abdul Karim, Muhammad Khalis and Saripan, M. Iqbal and Abd Rahman, Mohd Amiruddin and Osman, Nurul Huda and Dalah, Entesar Zawam and Mohd Noor, Noramaliza (2020) Impact of image contrast enhancement on stability of radiomics feature quantification on a 2D mammogram radiograph. IEEE Access, 8. art. no. 127730. pp. 1-12. ISSN 2169-3536

Mat Yusof, Nurhikma and Raja Ahmad Effendi, Raja Ahmad Azmeer and Dolah, Mohd Shahrizal and Yahaya, Mohd Faiz and Bolong, Jusang and Haron, Nuzul Azam and Harun, Azahar (2020) Flik: design tool on adaptation process for non-designers in a rehabilitation setting. ALAM CIPTA, International Journal on Sustainable Tropical Design Research & Practice, 13 (2). pp. 25-32. ISSN 1823-7231

Mazlan, Shahan and Yidris, Noorfaizal and Seyed Saeid, Rahimian Koloor and Petrů, Michal (2020) Experimental and numerical analysis of fatigue life of aluminum Al 2024-T351 at elevated temperature. Metals, 10 (12). pp. 1-14. ISSN 2075-4701

Mazlan, Shahan and Yidris, Noorfaizal and Zahari, R. and Gries, E. and Abang Abdul Majid, Dayang Laila and Ahmad, Kamarul Arifin (2020) Prediction of fatigue life of aluminum 2024-T3 at low temperature by finite element analysis. Journal of Mechanical Engineering and Sciences, 14 (3). 7170 - 7180. ISSN 2289-4659; ESSN: 2231-8380

Md Said, Mohamad Syazarudin and Wan Ab. Karim Ghani, Wan Azlina and Tan, Hong Boon and Ng, Denny Kok Sum (2020) Prediction and optimisation of syngas production from air gasification of napier grass via stoichiometric equilibrium model. Energy Conversion and Management: X, 10. art. no. 100057. pp. 1-9. ISSN 2590-1745

Md Saiful Islam, Salmah and Saadon, Syamimi (2020) Performance analysis of supercritical organic Rankine cycle system with different heat exchangers design configuration. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (2). 324 - 333. ISSN 2289 - 7879

Md Yusoff, Nelidya and Sulaiman, Abdul Hadi and Al-Mansoori, Mohammed Hayder and Mahdi, Mohd Adzir (2020) Double pass remotely pumped L-band EDFA with the integration of Raman amplification using multiwavelength dispersion compensator. Optik, 210. art. no. 164506. pp. 1-9. ISSN 0030-4026; ESSN: 1618-1336

Megat Ahmad Azman, Puteri Nurain and Shamsudin, Rosnah and Che Man, Hasfalina and Yaacob, Mohammad Effendy (2020) Effect of soaking process on physical properties of mature pepper berries (Piper nigrum L.). Food Research, 4 (suppl. 1). 116 - 123. ISSN 2550-2166

Megat Ahmad Azman, Puteri Nurain and Shamsudin, Rosnah and Che Man, Hasfalina and Ya’acob, Mohd Effendy (2020) Kinetics of quality changes in soaking water during the retting process of pepper berries (Piper nigrum L.). Processes, 8 (10). art. no. 1255. pp. 1-11. ISSN 2227-9717

Mijan, Nurul Asikin and Rosman, N. A. and Alsultan, Abdulkareem Ghassan and Mastuli, Mohd Sufri and Lee, Hwei Voon and Fauzi, Nor Nabihah and Ibrahim, Mohd Lokman and Alharthi, Fahad A. and Alghamdi, Abdulaziz Ali and Abdullah Aisyahi, Amjad and Yap, Taufiq Yun Hin (2020) Production of renewable diesel from Jatropha curcas oil via pyrolytic-deoxygenation over various multi-wall carbon nanotube-based catalysts. Process Safety and Environmental Protection, 142. 336 - 349. ISSN 0957-5820

Mior Zakuan Azmi, Mazidah and Ahmedov, Anvarjon and Taip, Farah Saleena (2020) Experimental studies and mathematical modeling on the effects of rapid airflow and baking temperature during baking. Emirates Journal of Food and Agriculture, 32 (6). 469 - 478. ISSN 2079-052X; ESSN: 2079-0538

Misron, Norhisam and Kamal Azhar, Nisa Syakirah and Hamidon, Mohd Nizar and Aris, Ishak and Tashiro, Kunihisa and Nagata, Hirokazu (2020) Effect of charging parameter on fruit battery-based oil palm maturity sensor. Micromachines, 11 (9). art. no. 806. pp. 1-15. ISSN 2072-666X

Misron, Norhisam and Kamal Azhar, Nisa Syakirah and Hamidon, Mohd Nizar and Aris, Ishak and Tashiro, Kunihisa and Nagata, Hirokazu (2020) Fruit battery with charging concept for oil palm maturity sensor. Sensors, 20 (1). art. no. 226. pp. 1-14. ISSN 1424-8220

Misron, Norhisam and Mohd Saini, Luqman and Aris, Ishak and Vaithilingam, Chockalingam Aravind and Tsuyoshi, Hanamoto (2020) Simplified design of magnetic gear by considering the maximum transmission torque line. Applied Sciences-Basel, 10 (23). art. no. 8515. pp. 1-14. ISSN 2076-3417

Moghaddam, Seyed Amirebrahim Emami and Harun, Mohd Razif and Mokhtar, Mohd Noriznan and Zakaria, Rabitah (2020) Kinetic and equilibrium modeling for the biosorption of metal ion by Zeolite 13X-Algal-Alginate Beads (ZABs). Journal of Water Process Engineering, 33. art. no. 101057. pp. 1-8. ISSN 2214-7144

Mohamad, Nur Aqilah and Azis, Norhafiz and Jasni, Jasronita and Ab. Kadir, Mohd. Zainal Abidin and Yunus, Robiah and Yaakub, Zaini (2020) Effect of surfactants on the lightning breakdown voltage of palm oil and coconut oil based Al2O3 nanofluids. Nanotechnology, 31 (42). art. no. 425708. pp. 1-16. ISSN 0957-4484; ESSN: 1361-6528

Mohamad, Nurzia and Mohamad Mazlan, Mazween and Mohamed Amin Tawakkal, Intan Syafinaz and A. Talib, Rosnita and Lau, Kia Kian and Fouad, Hassan and Jawaid, Mohammad (2020) Development of active agents filled polylactic acid films for food packaging application. International Journal of Biological Macromolecules, 163. 1451 - 1457. ISSN 0141-8130; ESSN: 1879-0003

Mohamad, Syahrul Hisham and Mohd Radzi, Mohd Amran and Mailah, Nashiren Farzilah and Abd. Wahab, Noor Izzri and Jidin, Auzani and Yusup Lada, Musa (2020) Adaptive notch filter under indirect and direct current controls for active power filter. Bulletin of Electrical Engineering and Informatics, 9 (5). 1794 - 1802. ISSN 2089-3191; ESSN: 2302-9285

Mohamad Aziz, Nur Atiqah and Abd Hamid, Hamidah and Yunus, Robiah and Abbas, Zulkifly and Omar, Rozita and Rashid, Umer and Muhammad Syam, Azhari (2020) Kinetics and thermodynamics of synthesis of palm oil-based trimethylolpropane triester using microwave irradiation. Journal of Saudi Chemical Society, 24 (8). pp. 522-566. ISSN 1319-6103

Mohamad Aziz, Nur Atiqah and Yunus, Robiah and Abd Hamid, Hamidah and Alsultan, Abdulkareem Ghassan and Omar, Rozita and Rashid, Umer and Abbas, Zulkifly (2020) An acceleration of microwave-assisted transesterification of palm oil-based methyl ester into trimethylolpropane ester. Scientific Reports, 10. art. no. 19652. pp. 1-17. ISSN 2045-2322

Mohamad Hafiz, Nur Liyana and Md Tahir, Paridah and Lee, Seng Hua and Zainal Abidin, Zurina and Sabaruddin, Fatimah Athiyah and Mohd Yunus, Noryuziah and Abdullah, Ummi Hani and H. P. S., Abdul Khalil (2020) Curing and thermal properties of co-polymerized tannin phenol–formaldehyde resin for bonding wood veneers. Journal of Materials Research and Technology, 9 (4). 6994 - 7001. ISSN 2238-7854; ESSN: 2214-0697

Mohamad Khair, Norhafizah and Abd Rahman, Nur Aliaa and Baharuddin, Azhari Samsu and Hafid, Halimatun Saadiah and Wakisaka, Minato (2020) Capturing the impact of nanobubble liquid in enhancing the physical quality of ice cream. Journal of Agricultural and Food Engineering, 1 (2). art. no. 0012. pp. 1-4. ISSN 2716-6236

Mohamad Mazlan, Mazween and A. Talib, Rosnita and Nyuk, Ling Chin and Shukri, Radhiah and Taip, Farah Saleena and Mohd Nor, Mohd Zuhair (2020) Physical and microstructure properties of oyster mushroom-soy protein meat analog via single-screw extrusion. Foods, 9 (8). art. no. 1023. pp. 1-16. ISSN 2304-8158

Mohamad Mazlan, Mazween and A. Talib, Rosnita and Taip, Farah Saleena and Chin, Nyuk Ling and Sulaiman, Rabiha and Shukri, Radhiah and Mohd Nor, Mohd Zuhair (2020) Changes in the physical properties and specific mechanical energy of corn-mango peel extrudates. CyTA-Journal of Food, 18 (1). 417 - 426. ISSN 1947-6345

Mohamad Nor, Mohd Hafiz and Kanesan, Thavamaran and Maskuriy, Farha and Yusuf, A. and Fatah, F. A. and Ahmad Anas, Siti Barirah (2020) Experimental demonstration of all-optical PolMux RoF system with multiservice transmission. Optics Communications, 475. art. no. 126293. pp. 1-6. ISSN 0030-4018

Mohamed, Sity Ainy Nor and Zainudin, Edi Syams and Salit, Mohd Sapuan and Azaman, M. D. and Tajul Arifin, Ahmad Mubarak (2020) Energy behavior assessment of rice husk fibres reinforced polymer composite. Journal of Materials Research and Technology, 9 (1). 383 - 393. ISSN 2238-7854; ESSN: 2214-0697

Mohamed Altarazi, Yazan Sofyan and Abu Talib, Abd Rahim and Saadon, Syamimi and Yu, Jianglong and Gires, Ezanee and Abdul Ghafir, Mohd Fahmi and Lucas, John (2020) On-design operation and performance characteristic of custom engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 70 (1). 144 - 154. ISSN 2289-7879

Mohamed Ariff, Azmah Hanim and N., Muhamad Kamil and Wei, Chuan Khang and Temitope T., Dele-Afolabi and Osman, Saliza Azlina (2020) Microstructural and shear strength properties of RHA-reinforced Sn–0.7Cu composite solder joints on bare Cu and ENIAg surface finish. Journal of Materials Science: Materials in Electronics, 31 (11). 8316 - 8328. ISSN 0957-4522; ESSN:1573-482X

Mohamed Ramli, Norulhuda and Verreth, J. A. J. and Md Yusoff, Fatimah and Khairudin, Nurulhuda and Nagao, Norio and Verdegem, Marc C. J. (2020) Integration of algae to improve nitrogenous waste management in recirculating aquaculture systems: a review. Frontiers in Bioengineering and Biotechnology, 8. pp. 1-18. ISSN 2296-4185

Mohammad, Altwallbah Neda Mahmod and Mohd Radzi, Mohd Amran and Azis, Norhafiz (2020) An enhanced adaptive perturb and observe technique for efficient maximum power point tracking under partial shading conditions. Applied Sciences-Basel, 10 (11). pp. 1-27. ISSN 2076-3417

Mohammad, Altwallbah Neda Mahmod and Mohd Radzi, Mohd Amran and Azis, Norhafiz and Shafie, Suhaidi and Mohd Zainuri, Muhammad Ammirrul Atiqi (2020) A novel hybrid approach for maximizing the extracted photovoltaic power under complex partial shading conditions. Sustainability, 12 (14). art. no. 5786. pp. 1-24. ISSN 2071-1050

Mohammad Ata, Karimeh Ibrahim and Che Soh, Azura and Ishak, Asnor Juraiza and Jaafar, Haslina (2020) A smart guidance indoor parking system based on Dijkstra's algorithm and ant colony algorithm. International Journal of Integrated Engineering, 12 (2). pp. 1-9. ISSN 2229-838X

Mohammad Fikry and Yusof, Yus Aniza and Al-Awaadh, Alhussein M. and Abdul Rahman, Russly and Chin, Nyuk Ling (2020) Prediction of the shelf-life of date seeds brew by integration of acceptability and quality indices. Journal of Food Measurement and Characterization, 14 (3). 1158 - 1171. ISSN 2193-4126; ESSN: 2193-4134

Mohammad Padzil, Farah Nadia and Lee, Seng Hua and Mohamed @ Asa'ari, Ainun Zuriyati and Lee, Ching Hao and Abdullah, Luqman Chuah (2020) Potential of oil palm empty fruit bunch resources in nanocellulose hydrogel production for versatile applications: a review. Materials, 13 (5). art. no. 1245. pp. 1-26. ISSN 1996-1944

Mohammed, Alaa Hadi and Che Soh, Azura and Ismail, Noor Faezah and Abdul Rahman, Ribhan Zafira and Mohd Radzi, Mohd Amran (2020) Improvement of LMS adaptive noise canceller using uniform poly-phase digital filter bank. Indonesian Journal of Electrical Engineering and Computer Science, 17 (3). 1258 - 1265. ISSN 2502-4752; ESSN: 2502-4760

Mohammed, I. and Abu Talib, A. R. (2020) Strength behaviour of silica aerogel/thermoset polymer with reinforced fibre-metal laminate composites for aero-engine firewall. Journal of Aeronautics, Astronautics and Aviation, Series A, 52 (1). 15 - 24. ISSN 1990-7710

Mohd Adib, Muhammad Nasir and Rowshon, Md Kamal and Mojid, Md Abdul and Habibu, Ismail (2020) Projected streamflow in the Kurau River Basin of Western Malaysia under future climate scenarios. Scientific Reports, 10 (1). pp. 1-15. ISSN 2045-2322

Mohd Ali, Maimunah and Hashim, Norhashila and Abd Aziz, Samsuzana and Lasekan, Ola (2020) Exploring the chemical composition, emerging applications, potential uses, and health benefits of durian: a review. Food Control, 113. art. no. 107189. pp. 1-11. ISSN 0956-7135

Mohd Ali, Maimunah and Hashim, Norhashila and Abd Aziz, Samsuzana and Lasekan, Ola (2020) Pineapple (Ananas comosus): a comprehensive review of nutritional values, volatile compounds, health benefits, and potential food products. Food Research International, 137. art. no. 109675. pp. 1-13. ISSN 0963-9969

Mohd Ali, Maimunah and Hashim, Norhashila and Abd Aziz, Samsuzana and Lasekan, Ola (2020) Principles and recent advances in electronic nose for quality inspection of agricultural and food products. Trends in Food Science & Technology, 99. pp. 1-10. ISSN 0924-2244

Mohd Ali, Maimunah and Hashim, Norhashila and Bejo, Siti Khairunniza and Shamsudin, Rosnah (2020) Correlation between physicochemical changes of seeded and seedless watermelons during postharvest storage. International Journal of Postharvest Technology and Innovation, 7 (1). 73 - 86. ISSN 1744-7550; ESSN: 1744-7569

Mohd Basri, Mohd Salahuddin and Mazlan, Norkhairunnisa and Mustapha, Faizal and Ishak, Mohamad Ridzwan and Saprudin, Abby Ashraff (2020) Factorial design approach to investigate the significance of factors on the fire resistant, compression and adhesion properties of geopolymer binder. Journal of Mechanical Engineering and Sciences, 14 (3). 7191 - 7204. ISSN 2289-4659; ESSN: 2231-8380

Mohd Basri, Mohd Salahuddin and Mohd Jais, Nurain and Sulaiman, Alifdalino and Mohd Nor, Mohd Zuhair and Abdul Karim Shah, Nor Nadiah and Ariffin, Siti Hajar (2020) Optimizing the processing factor and formulation of oat-based cookie dough for enhancement in stickiness and moisture content using response surface methodology and superimposition. Processes, 8 (7). pp. 1-19. ISSN 2227-9717

Mohd Basri, Mohd Salahuddin and Mustapha, Faizal and Mazlan, Norkhairunnisa and Ishak, Mohamad Ridzwan (2020) Optimization of rice husk ash-based geopolymers coating composite for enhancement in flexural properties and microstructure using response surface methodology. Coatings, 10 (2). art. no. 165. pp. 1-19. ISSN 2079-6412

Mohd Basri, Mohd Salahuddin and Mustapha, Faizal and Mazlan, Norkhairunnisa and Ishak, Mohd Ridzwan (2020) Optimization of adhesion strength and microstructure properties by using response surface methodology in enhancing the rice husk ash-based geopolymer composite coating. Polymers, 12 (11). art. no. 2709. pp. 1-15. ISSN 2073-4360

Mohd Chachuli, Siti Amaniah and Hamidon, Mohd Nizar and Ertugrul, Mehmet and Mamat @ Mat Nazir, Md. Shuhazlly and Jaafar, Haslina and Azis, Norhafiz (2020) Influence of B2O3 addition on the properties of TiO2 thick film at various annealing temperatures for hydrogen sensing. Journal of Electronic Materials, 49. 3340 - 3349. ISSN 0361-5235; ESSN: 1543-186X

Mohd Daniyal, Wan Mohd Ebtisyam Mustaqim and Yap, Wing Fen and Abdullah, Jaafar and Hashim, Hazwani Suhaila and Muhamad Fauzi, Nurul ‘Illya and Chanlek, Narong and Mahdi, Mohd Adzir (2020) X-ray photoelectron study on gold/nanocrystalline cellulose-graphene oxide thin film as surface plasmon resonance active layer for metal ion detection. Thin Solid Films, 713. pp. 1-10. ISSN 0040-6090; ESSN: 1879-2731

Mohd Mustafah, Anas and Mohamad Hanafi, Amir Asyraf and Mohd Karim, Muhammad Irfan (2020) Design study of rotary and vibration mechanisms for chili harvesting. International Journal of Emerging Trends in Engineering Research, 8 (1 spec. 2). 168 - 173. ISSN 2347-3983

Mohd Nor, Nor Aznan and Baharudin, B. T. Hang Tuah and Ghani, Jaharah and Leman, Zulkiflle and Mohd Ariffin, Mohd Khairol Anuar (2020) Effect of chip load and spindle speed on cutting force of Hastelloy X. Journal of Mechanical Engineering and Sciences, 14 (1). 6497 - 6503. ISSN 2289-4659; ESSN: 2231-8380

Mohd Nudri, Mohd Nadly Aizat and Bachman, Robert T. and Wan Abdul Karim Ghani, Wan Azlina and Ng, Denny Kok Sum and Azni, Atiyyah Ameenah (2020) Characterization of oil palm trunk biocoal and its suitability for solid fuel applications. Biomass Conversion and Biorefinery, 10. pp. 45-55. ISSN 2190-6823

Mohd Omar, Jusrianti and Mohd Nor, Mohd Zuhair and Mohd Basri, Mohd Salahuddin and Che Pa, Nasrul Fikry (2020) Clarification of guava juice by an ultrafiltration process: analysis on the operating pressure, membrane fouling and juice qualities. Food Research, 4 (suppl.1). 85 - 92. ISSN 2550-2166

Mohd Radzi, Mohd Hafiezal and Abdan, Khalina and Zainal Abidin, Zurina and Md Deros, Mohd Azaman and Zin, Mohd Hanafee (2020) Effect of blend composition on characteristics and performance of Jatropha bio-epoxy/epoxy matrix in composites with carbon fiber reinforcement. BioResources, 15 (2). 4464 - 4501. ISSN 1930-2126

Mohd Thani, Nurfatimah and Mustapa Kamal, Siti Mazlina and Sulaiman, Alifdalino and Taip, Farah Saleena and Omar, Rozita (2020) Consumers' delayed consumption of bakery products: effect on physical and chemical properties. Journal of Agricultural and Food Engineering, 1 (2). art. no. 0013. pp. 1-6. ISSN 2716-6236

Mohd Thani, Nurfatimah and Mustapa Kamal, Siti Mazlina and Taip, Farah Saleena and Sulaiman, Alifdalino and Omar, Rozita and Siajam, Shamsul Izhar (2020) Hydrolysis and characterization of sugar recovery from bakery waste under optimized subcritical water conditions. Journal of Food Science and Technology, 57 (8). 3108 - 3118. ISSN 0022-1155; ESSN: 0975-8402

Mohd Tohir, Mohd Zahirasri and Spearpoint, Michael and Fleischmann, Charles (2020) Probabilistic design fires for passenger vehicle scenarios. Fire Safety Journal, 120. art. no. 103039. pp. 1-9. ISSN 0379-7112

Mohd Yahya, Nor Akmar and Yusof Hamid, Mohd Rashid and Boon, Hoong Ong and Abdul Rahman, Norizah and Mahdi, Mohd Adzir (2020) H2 gas sensor based on Pd/ZnO nanostructures deposited on tapered optical fiber. IEEE Sensors Journal, 20 (6). 2982 - 2990. ISSN 1530-437X

Mohd Yusoff, N. and Zainol Abidin, N. H. and Abu Bakar, M. H. and Abdul Hadi, M. A. W. and Mahdi, M. A. (2020) Spectral behaviour of hybrid Raman-erbium random fiber laser with dual pumping. Optik, 208. pp. 1-7. ISSN 0030-4026; ESSN: 1618-1336

Mohd Yusoff, Norita and Abdullah, C. A. C. and Abdul Hadi, M. A. W. and Ng, E. K. and Lee, H. K. and Zainol Abidin, Nadiah Husseini and Rosli, N. S. and Mahdi, Mohd Adzir (2020) Low threshold Q-switched fiber laser incorporating titanium dioxide saturable absorber from waste material. Optik - International Journal for Light and Electron Optics, 218. art. no. 164998. ISSN 0030-4026

Mohd Zahri, Nur Amirah and Md Jamil, Siti Nurul Ain and Abdullah, Luqman Chuah and Sim, Jia Huey and Mobarekeh, Mohsen Nourouzi and Mohd Rapeia, Nur Salimah and Choong, Thomas Shean Yaw (2020) Central composite design of heavy metal removal using polymer adsorbent. Journal of Applied Water Engineering and Research, 9 (2). pp. 133-146. ISSN 2324-9676

Mohd Zaki, Muhammad Mirza and Al-Qahtani, Turki and Yidris, Noorfaizal and Sulaiman, Shamsuddin and Ariffin, Ahmad Hamdan and Yaakob, Mohd Saffuan and Ahmad, Kamarul Arifin (2020) Design and analysis of a water pipe leakage sensor. CFD Letters, 12 (9). 51 - 59. ISSN 2180-1363

Mohtar, Mohd Nazim and Zhao, Zhiwei and Weng, Z. and Lei, W. and Zhu, D. and Jiang, H. and Mohtar, M. N. and Abdul Halin, Izhal (2020) Modification of PPy-NW anode by carbon dots for high-performance mini-microbial fuel cells. Fuel Cells, 20 (2). 203 - 211. ISSN 1615-6846; ESSN: 1615-6854

Muda, Noor Azura and Yoshida, Hiroyuki and Ishak, Hazwani and Ismail, Mohd Halim Shah and Izhar, Shamsul (2020) Production and properties of solid biochar from oil palm trunk waste using sub-critical water technology. Journal of Oil Palm Research, 32 (3). 526 - 536. ISSN 1511-2780

Mudhafar, Mustafa and Zainol, Ismail and Jaafar, Che Nor Aiza and H. A., Alsailawi and Majhool, Alhussein Arkan (2020) Microwave-assisted green synthesis of Ag nanoparticles using leaves of Melia Dubia (Neem) and its antibacterial activities. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (1). 121 - 129. ISSN 2289 - 7879

Mugahed Amran, Y. H. and El-Zeadani, Mohamed and M. R., Raizal Saifulnaz and Alyousef, Rayed and Alabduljabbar, Hisham and Alrshoudi, Fahed and Alaskar, Abdulaziz (2020) RC beam strengthening using hinge and anchorage approach. Results in Materials, 5 (100047). pp. 1-17. ISSN 2590-048X

Muhammad Amir, Siti Madiha and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Jawaid, Mohammad and Safri, Syafiqah Nur Azrie and Mohd, Shukri and Mohd Salleh, Khairul Anuar (2020) Low velocity impact and compression after impact properties on gamma irradiated Kevlar/oil palm empty fruit bunch hybrid composites. Coatings, 10 (7). pp. 1-15. ISSN 2079-6412

Muhammad Rashid, Raizal Saifulnaz and S., Mohammed Salem and N. M., Azreen and Y. L., Voo and M., Haniza and A. A., Shukri and Yahya, Mohd Syukri (2020) Effect of elevated temperature to radiation shielding of ultra-high performance concrete with silica sand or magnetite. Construction and Building Materials, 262. art. no. 120567. pp. 1-7. ISSN 0950-0618

Muhammad Sayuti and Mohammad Alhajji and Sulaiman, Shamsuddin (2020) Mechanical properties and morphological analysis of copper filled aluminum alloy hybrid matrix composite. Journal of Engineering and Technological Sciences, 52 (6). 855 - 866. ISSN 2337-5779; ESSN: 2338-5502

Muhammed, Musa and Mustapha, Mazli and Ginta, Turnad Lenggo and Ali, Abdullah Musa and Mustapha, Faizal and Hampo, Chima Cyril (2020) Statistical review of microstructure-property correlation of stainless steel: implication for pre- and post-weld treatment. Processes, 8 (7). art. no. 811. pp. 1-32. ISSN 2227-9717

Mujahid, Yasir and Sallih, Nabihah and Mustapha, Mazli and Abdullah, Mohamad Zaki and Mustapha, Faizal (2020) Effects of processing parameters for vacuum-bagging-only method on shape conformation of laminated composites. Processes, 8 (9). pp. 1-16. ISSN 2227-9717

Mukhtar, Isma’ila and Leman, Zulkiflle and Zainudin, Edi Syams and Ishak, Mohamad Ridzwan (2020) Effectiveness of alkali and sodium bicarbonate treatments on sugar palm fiber: mechanical, thermal, and chemical investigations. Journal of Natural Fibers, 17 (6). 877 - 889. ISSN 1544-0478; ESSN: 1544-046X

Muniandy, Ratnasamy and Jakarni, Fauzan and Hassim, Salihudin and Oladimeji, Adedokun (2020) Effect of various additives on the low temperature performance of petroleum based asphalt binders. Journal of Traffic and Transportation Engineering, 8. 113 - 126. ISSN 1671-1637

Muniandy, Ratnasamy and Xavier, Francis and Mohd Jakarni, Fauzan and Hassim, Salihudin (2020) Preliminary investigation on establishing a new resilient modulus test approach for reduced size asphalt mixture samples smaller than 100 mm diameter. Journal of Traffic and Transportation Engineering, 8 (3). 93 - 105. ISSN 2095-7564

Murthy, Avinash Srikanta and Azis, Norhafiz and Jasni, Jasronita and Othman, Mohammad Lutfi and Mohd Yousof, Mohd Fairouz and Talib, Mohd Aizam (2020) Effect of shield placement for transient voltage mitigation due to switching surges in a 33/11 kV transformer windings. PLoS One, 15 (10). pp. 1-19. ISSN 1932-6203

Murthy, Avinash Srikanta and Azis, Norhafiz and Jasni, Jasronita and Othman, Mohammad Lutfi and Mohd Yousof, Mohd Fairouz and Talib, Mohd Aizam (2020) Extraction of winding parameters for 33/11 kV, 30 MVA transformer based on finite element method for frequency response modelling. PLoS One, 15 (8). art. no. 0236409. pp. 1-22. ISSN 1932-6203

Musa, Mohammed Ali and Idrus, Syazwani (2020) Effect of hydraulic retention time on the treatment of real cattle slaughterhouse wastewater and biogas production from HUASB reactor. Water, 12 (2). art. no. 490. pp. 1-18. ISSN 2073-4441

Musa, Mohammed Ali and Idrus, Syazwani and Harun, Mohd Razif and Tuan Mohd Marzuki, Tuan Nurfarhana and Abdul Wahab, Abdul Malek (2020) A comparative study of biogas production from cattle slaughterhouse wastewater using conventional and modified upflow anaerobic sludge blanket (UASB) reactors. International Journal of Environmental Research and Public Health, 17 (1). art. no. 283. pp. 1-19. ISSN 1661-7827; ESSN: 1660-4601

Mustafa, Haswani Maisarah and Mohd Amin, Nor Amaiza and Zakaria, Rabitah and Anuar, Mohd Shamsul and Baharuddin, Azhari Samsu and Hafid, Halimatun Saadiah and Omar, Farah Nadia (2020) Dual impact of different drying treatments and ethanol/water ratios on antioxidant properties and colour attribute of jackfruit leaves (Artocarpus heterophyllus Lam.) Mastura variety (J35). BioResources, 15 (3). 5122 - 5140. ISSN 1930-2126

Mustafa, Mudhafar and Ismail, Zainol and Jaafar, C. N. Aiza and H. A., Alsailawi and Arkan, Majhool Alhussein and M. B., Alsaady Mofaq (2020) Phytochemical screening and characterization of Meliadubia leaves extract for antimicrobial activity against Escherichia coli staphylococcus and aureus. Indian Journal of Ecology, 47 (2). 493 - 496. ISSN 0304-5250

Mustafa, Muhammad Norhaffis and Shafie, Suhaidi and Wahid, Mohd Haniff and Sulaiman, Yusran (2020) Preparation of TiO2 compact layer by heat treatment of electrospun TiO2 composite for dye-sensitized solar cells. Thin Solid Films, 693. art. no. 137699. pp. 1-7. ISSN 0040-6090

Mutafi, Ayad and Yidris, Noorfaizal and Koloor, Seyed Saeid Rahimian and Petrů, Michal (2020) Numerical prediction of residual stresses distribution in thin-walled press-braked stainless steel sections. Materials, 13 (23). pp. 1-31. ISSN 1996-1944

N. M., Azreen and M. Rashid, Raizal S. and Amran, Y. H. Mugahed and Voo, Y. L. and M., Haniza and M. Hairie and Alyousef, Rayed and Alabduljabbar, Hisham (2020) Simulation of ultra-high-performance concrete mixed with hematite and barite aggregates using Monte Carlo for dry cask storage. Construction and Building Materials, 263. pp. 1-14. ISSN 0950-0618

Naharuddin, Noor Zirwatul Ahlam and Sadrolhosseini, Amir Reza and Abu Bakar, Muhammad Hafiz and Tamchek, Nizam and Mahdi, Mohd Adzir (2020) Laser ablation synthesis of gold nanoparticles in tetrahydrofuran. Optical Materials Express, 10 (2). art. no. 381427. 323 - 331. ISSN 2159-3930

Najeeb, Muhammad Imran and Hameed Sultan, Mohamed Thariq and Andou, Yoshito and Md. Shah, Ain Umaira and Eksiler, Kubra and Jawaid, Mohammad and Ariffin, Ahmad Hamdan (2020) Characterization of silane treated Malaysian Yankee Pineapple AC6 leaf fiber (PALF) towards industrial applications. Journal of Materials Research and Technology, 9 (3). 3128 - 3139. ISSN 2238-7854; ESSN: 2214-0697

Nami, Yousef and Lornezhad, Gilda and Kiani, Amir and Abdullah, Norhafizah and Haghshenas, Babak (2020) Alginate-Persian Gum-prebiotics microencapsulation impacts on the survival rate of Lactococcus lactis ABRIINW-N19 in orange juice. LWT - Food Science and Technology, 124. art. no. 109190. pp. 1-8. ISSN 0023-6438; ESSN: 1096-1127

Naser, Marwah Abdulrazzaq and Alsabah, Muntadher and Mahmmod, Basheera M. and Noordin, Nor Kamariah and Abdulhussain, Sadiq H. and Baker, Thar (2020) Downlink training design for FDD massive MIMO systems in the presence of colored noise. Electronics, 9 (12). art. no. 2155. pp. 1-20. ISSN 2079-9292

Nasidi, Nuraddeen Mukhtar and Wayayok, Aimrun and Abdullah, Ahmad Fikri and Mohd Kassim, Muhamad Saufi (2020) Spatio‑temporal dynamics of rainfall erosivity due to climate change in Cameron Highlands, Malaysia. Modeling Earth Systems and Environment, 35 (10). pp. 1-15. ISSN 2363-6203; ESSN: 2363-6211

Nasruddin, Hairul Nazmin and Abdul Rahman, Anita and Mahadi, Muhammad Razif and Mohd Noor, Samsul Bahari and Abu Samah, Mohd Armi and Jamalani, Mohd Asrul and Mahmood, Mohd Reduan and Baharudin, Mohd Rafee (2020) Fire risk among secondary school students community relationship of human characteristics on total evacuation time. International Journal of Mechanical and Production Engineering Research and Development, 10 (3). 11875 - 11882. ISSN 2249-6890; ESSN: 2249-8001

Nasruddin, Hairul Nazmin and Mahmood, Mohd Reduan and Baharudin, Mohd Rafee and Abdul Rahman, Anita and Mahadi, Mohd Razif and Mohd Noor, Samsul Bahari (2020) Relationship of travel distances on total evacuation time among secondary students in Malaysia. Policy and Practice in Health and Safety, 18 (1). pp. 1-8. ISSN 1477-3996; ESSN: 1477-4003

Nayak, Suhas Yeshwant and Satish, Shenoy B. and Sultan, Mohamed Thariq Hameed and Kini, Chandrakant R. and Shenoy, K. Rajath and Samant, Rashmi and Sarvade, Praneeth P. and Basri, Adi Azriff and Mustapha, Faizal (2020) Influence of fabric orientation and compression factor on the mechanical properties of 3D E-glass reinforced epoxy composites. Journal of Materials Research and Technology, 9 (4). 8517 - 8527. ISSN 2238-7854

Nik Murzaini, Nik Masturah and Taip, Farah Saleena and Ab Aziz, Norashikin and Abd Rahman, Nur Aalia (2020) Effect of pre-treatment in producing pumpkin powder using air fryer and its application in 'Bingka' baking. Current Research in Nutrition and Food Science, 8 (1). 48 - 64. ISSN 2347-467X; ESSN: 2322-0007

Noor Azmi, Aiman Nabilah and Bejo, Siti Khairunniza and Jahari, Mahirah and Muharam, Farrah Melissa and Yule, Ian J. and Husin, Nur Azuan (2020) Early detection of Ganoderma boninense in oil palm seedlings using support vector machines. Remote Sensing, 12 (23). art. no. 3920. pp. 1-21. ISSN 2072-4292

Noor Hasnan, Noor Zafira and Mohd Ramli, Sharifah Hafiza (2020) Modernizing the preparation of the Malaysian mixed rice dish (MRD) with cook-chill central kitchen and implementation of HACCP. International Journal of Gastronomy and Food Science, 19. art. no. 100193. pp. 1-13. ISSN 1878-450X

Nor Mohamed, Sity Ainy and Zainudin, Edi Syams and Salit, Mohd Sapuan and Md. Deros, Mohd Azaman and Tajul ariffin, Ahmad Mubarak (2020) Effects of different stress ratios on fatigue crack growth of rice husk fibre-reinforced composite. BioResources, 15 (3). 6192 - 6205. ISSN 1930-2126

Nordin, Norhazirah and Othman, Siti Hajar and Abdul Rashid, Suraya and Kadir Basha, Roseliza (2020) Effects of glycerol and thymol on physical, mechanical, and thermal properties of corn starch films. Food Hydrocolloids, 106. art. no. 105884. pp. 1-8. ISSN 0268-005X; ESSN: 1873-7137

Norizan, Mohd Nurazzi and Abdan, Khalina and Muthukumar, Chandrasekar and Alias, Aisyah Humaira and Shafi, Ayu Rafiqah and Rushdan, Ahmad Ilyas and Zin, Mohd Hanafee (2020) Effect of fiber orientation and fiber loading on the mechanical and thermal properties of sugar palm yarn fiber reinforced unsaturated polyester resin composites. Polimery, 65 (2). pp. 115-124. ISSN 0032-2725

Norman, Masayu and Mohd Shafri, Helmi Zulhaidi and Idrees, Mohammed Oludare and Mansor, Shattri and Yusuf, Badronnisa (2020) Spatio-statistical optimization of image segmentation process for building footprint extraction using very high-resolution WorldView 3 satellite data. Geocarto International, 35 (10). 1124 - 1147. ISSN 1010-6049; ESSN: 1752-0762

Norman, Masayu and Mohd Shafri, Helmi Zulhaidi and Mansor, Shattri and Yusuf, Badronnisa and Mohd Radzali, Nurul Ain Wahida (2020) Fusion of multispectral imagery and LiDAR data for roofing materials and roofing surface conditions assessment. International Journal of Remote Sensing, 41 (18). pp. 7090-7111. ISSN 0143-1161; ESSN: 1366-5901

Obeid, Abdalla Alsediq A. and Kamarudin, Suryani and Mohd Tohir, Mohd Zahirasri (2020) Fire and health impact assessment of a Malaysian landfill fire. Perintis eJournal, 10 (2). 68 - 83. ISSN 2232-0725

Odoemena, Kenneth Ikenna and Kamal, Md. Rowshon and Che Man, Hasfalina (2020) Advances in utilization of wastewater in agricultural practice: a technical note. Irrigation and Drainage, 69 (1). 149 - 163. ISSN 1531-0361

Ogunwa, Titilayo and Blake, McIvor and Awang Jumat, Nurkhairunisa and Abdullah, Ermira Junita and Chahl, Javaan (2020) Longitudinal actuated abdomen control for energy efficient flight of insects. Energies, 13 (20). art. no. 5480. pp. 1-21. ISSN 1996-1073

Ojo-Kupoluyi, Oluwatosin Job and Mohd Tahir, Suraya and Dele-Afolabi, Temitope Theophilus and Anuar, Mohd Shamsul (2020) Controlling the sintering response in the development of multilayered components produced via powder injection molding route—a review. International Journal of Advanced Manufacturing Technology, 107 (9-10). 3755 - 3777. ISSN 0268-3768; ESSN: 1433-3015

Omar, Muhd Khaizer and Mat Rashid, Abdullah and Saripan, M. Iqbal and Mohd Puad, Mohd Hazwan and Ismail, Irwan Mahazir (2020) Analysis of employer’s feedback on the employment of People with Disabilities (PWDs). Journal of Advanced Research in Dynamical and Control Systems, 12 (spec. 8). 995 - 1007. ISSN 1943-023X

Omar, Qistina and Ali, Salmiaton and Choong, Thomas Shean Yaw and Yap, Taufiq Yun Hin and Siajam, Shamsul Izhar (2020) Optimization of carbon nanotube-coated monolith by direct liquid injection chemical vapor deposition based on Taguchi method. Catalysts, 10 (1). art. no. 67. pp. 1-17. ISSN 2073-4344

Ong, Huoy Ying and Md Said, Mohamad Syazarudin (2020) Evaluation of process safety management implementation in an oil field services company. Journal of Occupational Safety & Health, 17 (1). 17 - 28. ISSN 1883-678X

Ong, Phey Zhen and Hashim, Norhashila and Maringgal, Bernard (2020) Quality evaluation of mango using non-destructive approaches: A review. Journal of Agricultural and Food Engineering, 1 (1). pp. 1-8. ISSN 2716-6236

Othman, Noor Fadzlinda and Ya'acob, Mohammad Effendy and Mat Su, Ahmad Suhaizi and Jaafar, Juju Nakasha and Hizam, Hashim and Shahidan, Mohd Fairuz and Jamaluddin, Ahmad Hakiim and Guangnan, Chen and Jalaludin, Adam (2020) Modeling of stochastic temperature and heat stress directly underneath agrivoltaic conditions with orthosiphon stamineus crop cultivation. Agronomy, 10 (10). pp. 1-15. ISSN 2073-4395

Othman, Nurhanisah and Md. Jamil, Siti Nurul Ain and Masarudin, Mas Jaffri and Abdullah, Luqman Chuah and Daik, Rusli and Sarman, Nor Syazwani (2020) l-ascorbic acid and thymoquinone dual-loaded palmitoyl-chitosan nanoparticles: improved preparation method, encapsulation and release efficiency. Processes, 8 (9). art. no. 1040. pp. 1-19. ISSN 2227-9717

Othman, Siti Hajar and Tarmiti, Nurul Atiqah Najhah and Shapi'i, Ruzanna and Zahiruddin, Siti Mariam and Tawakkal, Intan Syafinaz and Basha, Roseliza (2020) Starch/banana pseudostem biocomposite films for potential food packaging applications. BioResources, 15 (2). 3984 - 3998. ISSN 1930-2126

Parnianifard, Amir and Ahmad, Siti Azfanizam (2020) Metamodel-based robust simulation-optimization assisted optimal design of multiloop integer and fractional-order PID controller. International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 33 (1). pp. 1-20. ISSN 0894-3370; ESSN:1099-1204

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2020) Crossing weighted uncertainty scenarios assisted distribution-free metamodel-based robust simulation optimization. Engineering with Computers, 36 (1). 139 - 150. ISSN 0177-0667; ESSN: 1435-5663

Porselvam, Umamaheswari and Mohamed Yusoff, Hamdan and Nik Ibrahim, Nik Nor Liyana (2020) Evaluation of plated versus grated process deck in Foating Production Storage and Offloading (FPSO) from explosion perspective using safety offshore. Pertanika Journal of Science and Technology, 28 (spec.1). 57 - 68. ISSN 0128-7702; ESSN: 2231-8534

Pudza, Musa Yahaya and Zainal Abidin, Zurina (2020) A sustainable and eco-friendly technique for dye adsorption from aqueous media using waste from Jatropha curcas (isotherm and kinetic model). Desalination and Water Treatment, 182. 365 - 374. ISSN 1944-3994; ESSN: 1944-3986

Pudza, Musa Yahaya and Zainal Abidin, Zurina and Abdul Rashid, Suraya and Md. Yasin, Faizah and Muhammad Noor, Ahmad Shukri and Issa, Mohammed Abdullah (2020) Eco-friendly sustainable fluorescent carbon dots for the adsorption of heavy metal ions in aqueous environment. Nanomaterials, 10 (2). art. no. 315. pp. 1-19. ISSN 2079-4991

Pui, Liew Phing and Karim, R. and Yusof, Y. A. and Wong, C. W. and Ghazali, H. M. (2020) Optimization of spray-drying parameters for the production of ‘Cempedak’ (Artocarpus integer) fruit powder. Journal of Food Measurement and Characterization, 14 (12). 3238 - 3249. ISSN 2193-4126; ESSN: 2193-4134

Pui, Liew Phing and Karim, Roselina and Yusof, Yus Aniza and Wong, Chen Wai and Mohd Ghazali, Hasanah (2020) Anti-caking agent effects on the properties of spray-dried ‘Cempedak’ fruit powder. Pertanika Journal of Tropical Agricultural Science, 43 (4). pp. 621-635. ISSN 1511-3701; ESSN: 2231-8542

Pushpanathan, Kalananthni and Hanafi, Marsyita and Mashohor, Syamsiah and Fazlil Ilahi, Wan Fazilah (2020) Machine learning in medicinal plants recognition: a review. Artificial Intelligence Review, 54. pp. 305-327. ISSN 0269-2821; ESSN: 1573-7462

Qassim, Hassan M. and Wan Hasan, Wan Zuha (2020) A review on upper limb rehabilitation robots. Applied Sciences, 10 (19). art. no. 6976. pp. 1-18. ISSN 2076-3417

Rahman, Ziaur and Hashim, Fazirulhisyam and A. Rasid, Mohd Fadlee and Othman, Mohamed and Alezabi, Kamal Ali Ahmed (2020) Normalized advancement based totally opportunistic routing algorithm with void detection and avoiding mechanism for underwater wireless sensor network. IEEE Access, 8. 67484 - 67500. ISSN 2169-3536

Raj Irudayaraj, Andrew Xavier and Abdul Wahab, Noor Izzri and Umamaheswari, Mallapu Gopinath and Mohd Radzi, Mohd Amran and Sulaiman, Nasri and Veerasamy, Veerapandiyan and Ramachandran, Rajeswari (2020) A Matignon’s theorem based stability analysis of hybrid power system for automatic load frequency control using atom search optimized FOPID controller. IEEE Access, 8. 168751 - 168772. ISSN 2169-3536

Randjbaran, Elias and Majid, Dayang L. and Zahari, Rizal and Hameed Sultan, Mohamed Thariq and Mazlan, Norkhairunnisa (2020) Effects volume of carbon nanotubes on the angled ballistic impact for Carbon Kevlar Hybrid fabrics. Facta Universitatis, Series: Mechanical Engineering, 18 (2). 229 - 244. ISSN 0354-02025; ESSN: 2335-0164

Rayung, Marwah and Aung, Min Min and Azhar, Shah Christirani and Abdullah, Luqman Chuah and Su'ait, Mohd Sukor and Ahmad, Azizan and Md. Jamil, Siti Nurul Ain (2020) Bio-based polymer electrolytes for electrochemical devices: insight into the ionic conductivity performance. Materials, 13 (4). art. no. 838. pp. 1-47. ISSN 1996-1944

Razali, Mohamad Omar Syafiq and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri (2020) Effect of cinnamon essential oil on morphological, flammability and thermal properties of nanocellulose fibre–reinforced starch biopolymer composites. Nanotechnology Reviews, 9. 1147 - 1159. ISSN 2191-9089; ESSN: 2191-9097

Razali, Mohamad Omar Syafiq and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Rushdan, Ahmad Ilyas and Asmawi, Nazrin Nurarief Mardi and Faisal Khan, Sherwani Shah and Abdan, Khalina (2020) Antimicrobial activities of starch-based biopolymers and biocomposites incorporated with plant essential oils: a review. Polymers, 12 (10). pp. 1-26. ISSN 2073-4360

Razali, Siti Amirah and Mohd Nor, Mohd Zuhair and Anuar, Mohd Shamsul and Shamsudin, Rosnah and Wan Mohamad, Wan Anwar Fahmi (2020) Banana powder production via foam mat drying. Advances in Agricultural and Food Research Journal, 1 (2). pp. 1-12. ISSN 2736-1799; ESSN: 2735-1084

Razali, Siti Zulaika and Yunus, Robiah and Abdul Rashid, Suraya and Lim, Hong Ngee and B., Mohamad Jan and Hamid, H. A. (2020) Process intensification of 2-ethylhexyl caprylate/caprate synthesis via a pulsed loop reactor: Multi-objective optimization. Chemical Engineering and Processing - Process Intensification, 149. art. no. 107837. pp. 1-12. ISSN 0255-2701

Razzaq, Alaa Mohammed and Abang Abdul Majid, Dayang Laila and Ishak, Mohamad Ridzwan and Al-Naib, Uday Muwafaq Basheer (2020) Mathematical modeling and analysis of tribological properties of AA6063 aluminum alloy reinforced with fly ash by using response surface methodology. Crystals, 10 (5). art. no. 403. pp. 1-17. ISSN 2073-4352

Razzaq, Alaa Mohammed and Majid, Dayang Laila and Ishak, Mohamad Ridzwan and Basheer, Uday Muwafaq (2020) Mathematical modeling and analysis of tribological properties of AA6063 aluminium reinforced with fly ash by using response surface methodology. Crystals, 10 (5). pp. 1-17. ISSN 2073-4352

Rebitanim, Nur Akmal and Hanafi, Mohamed Musa and Idris, Abu Seman and Abdullah, Siti Nor Akmar and Mohidin, Hasmah and Rebitanim, Nur Zalikha (2020) GanoCare® improves oil palm growth and resistance against Ganoderma basal stem rot disease in nursery and Ffeld trials. Biomed Research International, 2020. art. no. 3063710. pp. 1-16. ISSN 2314-6133; ESSN: 2314-6141

Rezaei, Nima and Uddin, Mohammad Nasir and Khairul Amin, Ifte and Othman, Mohammad Lutfi and Marsadek, Marayati and Hasan, M. (2020) A novel hybrid machine learning classifier-based digital differential protection scheme for intertie zone of large-scale centralized DFIG-based wind farms. IEEE Transactions on Industry Applications, 56 (4). 3453 - 3465. ISSN 0093-9994; ESSN: 1939-9367

Ridha, Hussein Mohammed and Gomes, Chandima and Hizam, Hashim and Ahmadipour, Masoud (2020) Optimal design of standalone photovoltaic system based on multi-objective particle swarm optimization: a case study of Malaysia. Processes, 8 (1). art. no. 41. pp. 1-23. ISSN 2227-9717

Ridha, Hussein Mohammed and Gomes, Chandima and Hizam, Hashim and Ahmadipour, Masoud and Muhsen, Dhiaa Halboot and Ethaib, Saleem (2020) Optimum design of a standalone photovoltaic system based on integration of iterative-PESA-II and AHP-VICKOR methods. Processes, 8 (3). pp. 1-30. ISSN 2227-9717

Ridha, Hussein Mohammed and Gomes, Chandima and Hizam, Hashim and Ahmadipour, Masoud and Muhsen, Dhiaa Halboot and Ethaib, Saleem (2020) Optimum design of a standalone solar photovoltaic system based on novel integration of iterative-PESA-II and AHP-VIKOR methods. Processes, 8 (3). art. no. 367. pp. 1-30. ISSN 2227-9717

Ridha, Hussein Mohammed and Gomes, Chandima and Hizam, Hashim and Mirjalili, Seyedali (2020) Multiple scenarios multi-objective salp swarm optimization for sizing of standalone photovoltaic system. Renewable Energy, 153. pp. 1330-1345. ISSN 0960-1481; ESSN: 1879-0682

Riza, Muhammad Arif and Go, Yun Ii and Maier, Robert R. J. and Harun, Sulaiman Wadi and Anas, Siti Barirah (2020) Hygroscopic materials and characterization techniques for fiber sensing applications: a review. Sensors and Materials, 32 (11 (3)). 3755 - 3772. ISSN 0914-4935

Romli, Fairuz Izzuddin and Salim, Salim Mkubwa (2020) Preliminary study of passengers’ body heat harvesting potential in commercial transport aircraft. International Journal on Engineering Applications, 8 (1). 32 - 40. ISSN 2281-2881; ESSN: 2533-2295

Romli, Fairuz Izzudin and Salim, Salim Mkubwa (2020) Factorial study on seated aircraft passengers’ body heat harvesting. International Journal of Emerging Trends in Engineering Research, 8 (4). 1309 - 1314. ISSN 2347-3983

Roy, Rhitankar Saha and Lim, Chong Lye and Lim, Chin Guan and Adam, Nor Mariah (2020) ANSYS simulation study to generate pressure from various water-wind flow conditions to calculate electricity generated using piezoelectric cells. Journal of CFD Letters, 12 (9). 27 - 35. ISSN 2180-1363

Roy, Rhitankar Saha and Lim, Chong Lye and Lim, Chin Guan and Adam, Nor Mariah (2020) ANSYS water-wind flow simulation to study pressure generated under various conditions to generate electricity using piezoelectric cells. Journal of Mechanical Engineering, 17 (3). pp. 1-11. ISSN 1823-5514; ESSN: 2550-164X

Rubinsin, Nowilin James and Wan Daud, Wan Ramli and Kamarudin, Siti Kartom and Masdar, Mohd Shahbudin and Rosli, Masli Irwan and Samsatli, Sheila and Tapia, John Frederick and Wan Ab. Karim Ghani, Wan Azlina and Lim, Kean Long (2020) Optimization of oil palm empty fruit bunches value chain in Peninsular Malaysia. Food and Bioproducts Processing, 119. 179 - 194. ISSN 0960-3085; ESSN: 1744-3571

Rushdan, Ahmad Ilyas and Salit @ Sinon, Mohd Sapuan (2020) Biopolymers and biocomposites: chemistry and technology. Current Analytical Chemistry, 16 (5). 500 - 503. ISSN 1573-4110; ESSN: 1875-6727

Rusli, Julie Roslita and Shafie, Suhaidi and Mohd Sidek, Roslina and Abdul Majid, Hasmayadi and Wan Hasan, Wan Zuha and Mustafa, Mohd. Amrallah (2020) Optimized low voltage low power dynamic comparator robust to process, voltage and temperature variation. Indonesian Journal of Electrical Engineering and Computer Science, 17 (2). 783 - 792. ISSN 2502-4752; ESSN: 2502-4760

S. E., Rosland Abel and Yusof, Yus Aniza and Chin, Nyuk Ling and Chang, Lee Sin and Hasan, Mohd Ghazali and Abdul Manaf, Yanty Noorzianna (2020) Characterisation of physicochemical properties of gum arabic powder at various particle sizes. Food Research, 4 (suppl.1). 107 - 115. ISSN 2550-2166

Saadon, Syamimi and Gaillard, Leon and Ménézo, Christophe and Giroux Julien, Stéphanie (2020) Exergy, exergoeconomic and enviroeconomic analysis of a building integrated semi-transparent photovoltaic/thermal (BISTPV/T) by natural ventilation. Renewable Energy, 150. 981 - 989. ISSN 0960-1481; ESSN: 1879-0682

Saadon, Syamimi and Mohd Nasir, Nur Athirah (2020) Performance and sustainability analysis of an Organic Rankine Cycle system in subcritical and supercritical conditions for waste heat recovery. Energies, 13 (12). art. no. 3035. pp. 1-24. ISSN 1996-1073

Sabah, Sinan and Sulaiman, Nasri (2020) A self-rectifying memristor model for simulation and ReRAM applications. Indonesian Journal of Electrical Engineering and Computer Science, 19 (3). 1204 - 1209. ISSN 2502-4752

Sabaruddin, Fatimah Athiyah and Paridah, M. T. and Salit, Mohd Sapuan and Rusydan, Ahmad Ilyas and Seng, Hua Lee and Abdan, Khalina and Mazlan, Norkhairunnisa and Muhammad Roseley, Adlin Sabrina and Shawkataly, Abdul Khalil H. P. (2020) The effects of unbleached and bleached nanocellulose on the thermal and flammability of plypropylene-reinforced kenaf core hybrid polymer bionanocomposites. Polymers, 13 (1). art. no. 116. pp. 1-19. ISSN 2073-4360

Sabbar, H. M. and Leman, Zulkiflle and Rady, Mohammed H. and Shamsudin, S. and Mohd Tahir, Suraya and Jaafar, C. N. Aiza and Mohamed Ariff, Azmah Hanim and Zahari, Nur Ismarrubie and Msebawi, M. S. (2020) Mechanical and physical properties of micro alumina reinforced direct recycled AA6061 chips based matrix by hot extrusion process. International Journal of Mechanical and Mechatronics Engineering, 20 (3). 32 - 41. ISSN 2227-2771; ESSN: 2077-124X

Sabo, Aliyu and Abdul Wahab, Noor Izzri and Othman, Mohammad Lutfi and Mohd Jaffar, Mai Zurwatul Ahlam (2020) Novel farmland fertility algorithm based PIDPSS design for SMIB angular stability enhancement. International Journal of Advanced Science and Technology, 29 (6 spec.). 873 - 882. ISSN 2005-4238

Sabo, Aliyu and Abdul Wahab, Noor Izzri and Othman, Mohammad Lutfi and Mohd Jaffar, Mai Zurwatul Ahlam and Beiranvand, Hamzeh (2020) Farmland fertility optimization for designing of interconnected multi-machine power system stabilizer. Applications of Modelling and Simulation, 4. 183 - 201. ISSN 2600-8084

Sabo, Aliyu and Abdul Wahab, Noor Izzri and Othman, Mohammad Lutfi and Mohd Jaffar, Mai Zurwatul Ahlam and Beiranvand, Hamzeh (2020) Optimal design of power system stabilizer for multimachine power system using farmland fertility algorithm. International Transactions on Electrical Energy Systems, 30 (12). pp. 1-33. ISSN 2050-7038

Sabre, A. H. and Wan Hasan, Wan Zuha and Nordin, Farah Hani and Ab Kadir, Mohd Zainal Abidin (2020) Stand-alone backup power system for electrical appliances with solar PV and grid options. Indonesian Journal of Electrical Engineering and Computer Science, 17 (2). 689 - 699. ISSN 2502-4752

Sabry, Ali Hussein and Wan Hasan, Wan Zuha and Mohtar, Mohd Nazim and Raja Ahmad, Raja Mohd Kamil and Ramli, Hafiz Rashidi and Ang, S. P. and Abdul Hamid, Zainidi (2020) Image processing based foot plantar pressure distribution analysis and modeling. Indonesian Journal of Electrical Engineering and Computer Science, 17 (2). 594 - 605. ISSN 2502-4752; ESSN: 2502-4760

Safri, Lenny Suryani and Tan, Henry Chor Lip and Saripan, M. Iqbal and K., Krishnan and Md Idris, Mohamad Aziman and Harunarashid, Hanafiah (2020) Older age and duration of exposure to type 2 diabetes in selective screening of asymptomatic carotid artery stenosis for primary stroke prevention - a experience single institution. Primary Care Diabetes, 14 (4). 364 - 369. ISSN 1751-9918

Saheed, Sanusi and Abd. Aziz, Farah N. A. and Amran, Mugahed and Vatin, Nikolai and Fediuk, Roman and Ozbakkaloglu, Togay and Gunasekaran, Murali and Mosaberpanah, Mohammad Ali (2020) Structural performance of shear loaded precast EPS-foam concrete half-shaped slabs. Sustainability, 12 (22). pp. 1-17. ISSN 2071-1050

Sai, Siong Jun and Harun @ Ramli, Hafiz Rashidi and Che Soh, Azura and Kamsani, Noor Ain and Raja Ahmad, Raja Mohd Kamil and Ahmad, Siti Anom and Ishak, Asnor Juraiza (2020) Development of fall detection and activity recognition using threshold based method and neural network. Indonesian Journal of Electrical Engineering and Computer Science, 17 (3). 1338 - 1347. ISSN 2502-4752; ESSN: 2502-4760

Sairy, Nur Aqilah and Mazlan, Norkhairunnisa and Ishak, Mohamad Ridzwan and Zulkepli, Nik Noriman (2020) Investigation on the flexural properties of nanofillers loading on the Jute/Carbon/PLA nanocomposites. Journal of Mechanical Engineering and Sciences, 14 (4). 7424 - 7433. ISSN 2289-4659; ESSN: 2231-8380

Saleviter, Silvan and Yap, Wing Fen and Sheh Omar, Nur Alia and Mohd Daniyal, Wan Mohd Ebtisyam Mustaqim and Abdullah, Jaafar and Mahdi, Mohd Adzir (2020) Label-free binding analysis of 4-(2-Pyridylazo)-resorcinol-based composite layer with cobalt ion using surface plasmon resonance optical sensor. Sensors and Materials, 32 (9 (1)). 2877 - 2889. ISSN 0914-4935

Salim, Nur Ashida and Jasni, Jasronita and Othman, Muhammad Murtadha (2020) Reliability assessment by sensitivity analysis due to electrical power sequential tripping for energy sustainability. International Journal of Electrical Power and Energy Systems, 126. art. no. 106582. pp. 1-10. ISSN 0142-0615

Salit, Mohd Sapuan and H. S., Aulia and Rushdan, Ahmad Ilyas and A., Atiqah and Theophilus, Dele-Afolabi Temitope and Norizan, Mohd Nurazzi and A. B. M., Supian and Mahamud, Siti Nur Atikah (2020) Mechanical properties of longitudinal basalt/woven-glass-fiber-reinforced unsaturated polyester-resin hybrid composites. Polymers, 12 (10). pp. 1-14. ISSN 2073-4360

Samin, R. and Azman, N and Nuawi, MZ and Haris, SM and Ghani, JA (2020) Optimization of the surface roughness for titanium Ti6A14V in turning process using Taguchi method. Test Engineering and Management, 83. 1072 - 1078. ISSN 0193-4120

Samin, R. and Nuawi, M. Z. and Haris, S. M. and Ghani, J. A. (2020) Statistical investigation for cutting force and surface roughness of S45C steel in turning processes by I-kazTM method. Journal of Physics: Conference Series, 1489 (1). pp. 1-11. ISSN 1742-6588; ESSN: 1742-6596

Sanchez, Philip Donald C. and Hashim, Norhashila and Shamsudin, Rosnah and Mohd Nor, Mohd Zuhair (2020) Applications of imaging and spectroscopy techniques for non-destructive quality evaluation of potatoes and sweet potatoes: a review. Trends in Food Science and Technology, 96. 208 - 221. ISSN 0924-2244

Sanchez, Philip Donald C. and Hashim, Norhashila and Shamsudin, Rosnah and Mohd Nor, Mohd Zuhair (2020) Laser-light backscattering imaging approach in monitoring and classifying the quality changes of sweet potatoes under different storage conditions. Postharvest Biology and Technology, 164 (1). art. no. 111163. pp. 1-10. ISSN 0925-5214

Sanchez, Philip Donald C. and Hashim, Norhashila and Shamsudin, Rosnah and Mohd Nor, Mohd Zuhair (2020) Quality evaluation of sweet potatoes (Ipomoea batatas L.) of different varieties using laser light backscattering imaging technique. Scientia Horticulturae, 260 (108861). pp. 1-10. ISSN 0304-4238; ESSN: 1879-1018

Sayyed, M. I. and Ati, Ali A. and Mhareb, M. H. A. and Mahmoud, K. A. and Kaky, Kawa M. and Baki, S. O. and Mahdi, M. A. (2020) Novel tellurite glass (60-x) TeO2–10GeO2-20ZnO–10BaO-xBi2O3 for radiation shielding. Journal of Alloys and Compounds, 844. art. no. 155668. pp. 1-13. ISSN 0925-8388; ESSN: 1873-4669

Shaari, Nurfarhana and Shamsudin, Rosnah and Mohd Nor, Mohd Zuhair and Hashim, Norhashila (2020) Phenolic, flavonoid and anthocyanin contents of local sweet potato (Ipomoea batatas). Food Research, 4 (suppl.1). 74 - 77. ISSN 2550-2166

Shaharum, Nur Shafira Nisa and Mohd Shafri, Helmi Zulhaidi and Wan Ab. Karim Ghani, Wan Azlina and Samsatli, Sheila and Al-Habshi, Mohammed Mustafa and Yusuf, Badronnisa (2020) Oil palm mapping over Peninsular Malaysia using Google Earth Engine and machine learning algorithms. Remote Sensing Applications: Society and Environment, 17. art. no. 100287. pp. 1-14. ISSN 2352-9385

Shaharuzaman, Mohd Adrinata and Salit, Mohd Sapuan and Mansor, Muhd Ridzuan and Mohamed Yusoff, Mohd Zuhri (2020) Conceptual design of natural fiber composites as a side-door impact beam using hybrid approach. Journal of Renewable Materials, 8 (5). 549 - 563. ISSN 2164-6325; ESSN: 2164-6341

Shaikh, Muhammad Umair and Ahmad, Siti Anom and Wan Adnan, Wan Azizun (2020) Secured electrocardiograph (ECG) signal using fully homomorphic encryption technique. Test Engineering and Management, 82. 12029 - 12034. ISSN 0193-4120

Shaikh, Muhammad Umair and Wan Adnan, Wan Azizun and Ahmad, Siti Anom (2020) Secured electrocardiograph (ECG) signal using partially homomorphic encryption technique–RSA algorithm. Pertanika Journal of Science and Technology, 28 (spec. 2). pp. 231-242. ISSN 0128-7680; ESSN: 2231-8526

Shaipulizan, Nur Syafiqah and Md. Jamil, Siti Nurul Ain and Kamaruzaman, Sazlinda and Subri, Nur Nida Syamimi and Adeyi, Abel Adekanmi and Abdullah, Abdul Halim and Abdullah, Luqman Chuah (2020) Preparation of ethylene glycol dimethacrylate (EGDMA)-based terpolymer as potential sorbents for pharmaceuticals adsorption. Polymers, 12 (2). art. no. 423. pp. 1-19. ISSN 2073-4360

Shamsuddin, Rosnah and Hamzah, Hanny Zurina and K., Shuso and E., Yasunaga and Mahat, Fauziah (2020) A review: nutrition quality and processing of Malaysian strawberries. Food Research, 4 (suppl.1). 43 - 51. ISSN 2550-2166

Shamsudin, Nur Hazahsha and Shafie, Suhaidi and Ab Kadir, Mohd Zainal Abidin and Ahmad, Fauzan and Sadrolhosseini, Amir Reza and Sulaiman, Yusran and Chachuli, S. A. M. (2020) Power conversion efficiency (PCE) performance of backilluminated DSSCs with different Pt catalyst contents at the optimized TiO2 thickness. Optik, 203. art. no. 163567. pp. 1-8. ISSN 0030-4026

Shamsudin, Nur Hazahsha and Shafie, Suhaidi and Ab. Kadir, Mohd. Zainal Abidin and Ahmad, Fauzan and Mohd Chachuli, Siti Amaniah and Sulaiman, Yusran (2020) I-V performance analysis of flexible back Illuminated Dye Sensitized Solar cells (DSSCS) with various platinum catalyst contents. Journal of Physics: Conference Series, 1432 (1). art. no. 012043. pp. 1-10. ISSN 1742-6588; ESSN: 17426-596

Shamsudin, Rosnah and Hamzah, Hanny Zurina and Shuso, Kawamura and Yasunaga, Eriko and Kamarul Zaman, Amanina Amani (2020) A comparison of strawberry cultivation: case study of selected farms in Malaysia and Japan. International Journal of Academic Research in Business and Social Sciences, 10 (1). pp. 232-250. ISSN 2222-6990

Shamsudin, Rosnah and Zulkifli, N. A. and Kamarul Zaman, A. A. (2020) Quality attributes of fresh pineapple-mango juice blend during storage. International Food Research Journal, 27 (1). pp. 141-149. ISSN 1985-4668; ESSN: 2231-7546

Sharaf, Hussein Kadhim and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Yidris, Noorfaizal (2020) Conceptual design of the cross-arm for the application in the transmission towers by using TRIZ–morphological chart–ANP methods. Journal of Materials Research and Technology, 9 (4). 9182 - 9188. ISSN 2238-7854; ESSN: 2214-0697

Sharaf, Hussein Kadhim and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Yidris, Noorfaizal and Fattahi, Arash (2020) Experimental and numerical investigation of the mechanical behavior of full-scale wooden cross arm in the transmission towers in terms of load-deflection test. Journal of Materials Research and Technology, 9 (4). 7937 - 7946. ISSN 2238-7854

Sharu, Eddy Herman and Ab Razak, Mohd Shahrizal (2020) Hydraulic performance and modelling of pressurized drip irrigation system. Water, 12 (8). art. no. 2295. pp. 1-14. ISSN 2073-4441

Shaukat, Haafizah Rameeza and Hashim, Fazirulhisyam and Shaukat, Muhammad Arslan and Alezabi, Kamal Ali (2020) Hybrid multi-level detection and mitigation of clone attacks in mobile wireless sensor network (MWSN). Sensors, 20 (8). art. no. 2283. pp. 1-23. ISSN 1424-8220

Sheh Omar, Nur Alia and Fen, Yap Wing and Saleviter, Silvan and Mustapha Kamil, Yasmin and Mohd Daniyal, Wan Mohd Ebtisyam Mustaqim and Abdullah, Jaafar and Mahdi, Mohd Adzir (2020) Experimental evaluation on surface plasmon resonance sensor performance based on sensitive hyperbranched polymer nanocomposite thin films. Sensors and Actuators, A: Physical, 303. art. no. 111830. pp. 1-10. ISSN 0924-4247

Sheh Omar, Nur Alia and Yap, Wing Fen and Abdullah, Jaafar and Sadrolhosseini, Amir Reza and Mustapha Kamil, Yasmin and Muhamad Fauzi, Nurul 'Illya and Hashim, Hazwani Suhaila and Mahdi, Mohd Adzir (2020) Quantitative and selective surface plasmon resonance response based on a reduced graphene oxide–polyamidoamine nanocomposite for detection of dengue virus E-proteins. Nanomaterials, 10 (3). art. no. 569. pp. 1-14. ISSN 2079-4991

Sheh Omar, Nur Alia and Yap, Wing Fen and Abdullah, Jaafar and Sadrolhosseini, Amir Reza and Mustapha Kamil, Yasmin and Muhamad Fauzi, Nurul ‘Illya and Hashim, Hazwani Suhaila and Mahdi, Mohd Adzir (2020) Quantitative and selective surface plasmon resonance response based on reduced graphene oxide-polyamidoamine nanocomposite for detection of dengue virus E-proteins. Nanomaterials, 10 (3). art. no. 569. pp. 1-14. ISSN 2079-4991

Shehan, Muna Khalil and Sahari, Barkawi and Abdul Jalil, Nawal Aswan and Tang, Sai Hong and As'arry, Azizan (2020) Dynamic analysis of an optimal active suspension system us-ing global search optimization. International Journal of Engineering and Technology Innovation, 7 (3 spec. 17). 43 - 46. ISSN 2223-5329; ESSN: 2226-809X

Siew, Sand Chee and Jawaid, Mohammad and Hameed Sultan, Mohamed Thariq and Alotmane, Othman Y. and Abdullah, Luqman Chuah (2020) Effects of nanoclay on physical and dimensional stability of bamboo/kenaf/nanoclay reinforced epoxy hybrid nanocomposites. Journal of Materials Research and Technology, 9 (3). 5871 - 5880. ISSN 2238-7854; ESSN: 2214-0697

Silas, Kiman and Wan Ab. Karim Ghani, Wan Azlina and Choong, Thomas Shean Yaw and Rashid, Umer (2020) Optimization of activated carbon monolith Co3O4-based catalyst for simultaneous SO2/NOx removal from flue gas using response surface methodology. Combustion Science and Technology, 192 (5). 786 - 803. ISSN 0010-2202; ESSN: 1563-521X

Silas, Kiman and Wan Ab. Karim Ghani, Wan Azlina and Shean, Thomas Yaw Choong and Rashid, Umer (2020) Monolith metal-oxide-supported catalysts: sorbent for environmental application. Catalysts, 10 (9). pp. 1-25. ISSN 2073-4344

Sohail, Saqib and Mumtaz, Muhammad Waseem and Mukhtar, Hamid and Touqeer, Tooba and Anjum, Muhammad Kafeel and Rashid, Umer and Wan Ab. Karim Ghani, Wan Azlina and Choong, Thomas Shean Yaw (2020) Spirogyra oil-based biodiesel: response surface optimization of chemical and enzymatic transesterification and exhaust emission behavior. Catalysts, 10 (10). pp. 1-12. ISSN 2073-4344

Soltani, Soroush and Khanian, Nasrin and Rashid, Umer and Shean, Thomas Yaw Choong (2020) Fundamentals and recent progress relating to the fabrication, functionalization and characterization of mesostructured materials using diverse synthetic methodologies. RSC Advances, 10 (28). 16431 - 16456. ISSN 2046-2069

Soltani, Soroush and Khanian, Nasrin and Thomas, Shean Yaw Choong and Rashid, Umer, Umer and Arbi Nehdi, Imededdine and Mohamed Alobre, Mohsen (2020) PEG-assisted microwave hydrothermal growth of spherical mesoporous Zn-based mixed metal oxide nanocrystalline: Ester production application. Fuel, 279. art. no. 118489. pp. 1-9. ISSN 0016-2361

Suhailin, Fariza Hanim and Alwahib, Ali Abdulkhaleq and Mustapha Kamil, Yasmin and Abu Bakar, Muhammad Hafiz and Huang, Nay Ming and Mahdi, Mohd Adzir (2020) Fiber-based surface plasmon resonance sensor for lead ion detecion in aqueous solution. Plasmonics, 15. 1369 - 1376. ISSN 1557-1955; ESSN: 1557-1963

Sujinda, Narathip and Varith, Jaturapatr and Jaturonglumlert, Somkiat and Shamsudin, Rosnah (2020) Closed-loop temperature control during microwave freeze-drying of carrot slices. Maejo International Journal of Science and Technology, 14 (1). 81 - 92. ISSN 1905-7873

Sulaiman, Abdul Hadi and Md. Yusoff, Nelidya and Abdullah, Fairuz and Mahdi, Mohd Adzir (2020) Tunable multiwavelength fiber laser based on bidirectional SOA in conjunction with Sagnac loop mirror interferometer. Results in Physics, 18. pp. 1-5. ISSN 2211-3797

Tan, K. S. and Wong, Shaw Voon and Megat Ahmad, M. M. H. (2020) Design and develop an apparatus for measurement of inertial properties for a typical two-wheel motorcycle. Journal of Engineering Science and Technology, 15 (5). 2963 - 2985. ISSN 1823-4690

Touqeer, Tooba and Mumtaz, Muhammad Waseem and Mukhtar, Hamid and Irfan, Ahmad and Akram, Sadia and Shabbir, Aroosh and Rashid, Umer and Nehdi, Imededdine Arbi and Choong, Thomas Shean Yaw (2020) Fe3O4-PDA-lipase as surface functionalized nano biocatalyst for the production of biodiesel using waste cooking oil as feedstock: characterization and process optimization. Energies, 13 (1). art. no. 177. pp. 1-19. ISSN 1996-1073

Van, Tim Emmerik and Seibert, Jan and Strobl, Barbara and Etter, Simon and Oudendammer, Tijmen den and Rutten, Martine and Ab Razak, Mohd Shahrizal and Van Meerveld, IIja (2020) Crowd-based observations of Riverine macroplastic pollution. Frontiers in Earth Science, 8. art. no. 298. pp. 1-12. ISSN 2296-6463

Veerasamy, Veerapandiyan and Abdul Wahab, Noor Izzri and Ramachandran, Rajeswari and Othman, Mohammad Lutfi and Hizam, Hashim and Irudayaraj, Andrew Xavier Raj and Guerrero, Josep M. and Kumar, Jeevitha Satheesh (2020) A Hankel matrix based reduced order model for stability analysis of hybrid power system using PSO-GSA optimized cascade PI-PD controller for automatic load frequency control. IEEE Access, 8. 71422 - 71446. ISSN 2169-3536

Veerasamy, Veerapandiyan and Abdul Wahab, Noor Izzri and Vinayagam, Arangarajan and Othman, Mohammad Lutfi and Ramachandran, Rajeswari and Inbamani, Abinaya and Hizam, Hashim (2020) A novel discrete wavelet transform-based graphical language classifier for identification of high-impedance fault in distribution power system. International Transactions on Electrical Energy Systems, 30 (6). art. no. 12378. pp. 1-24. ISSN 2050-7038

Veerasamy, Veerapandiyan and AbdulWahab, Noor Izzri and Ramachandran, Rajeswari and Madasamy, Balasubramonian and Mansoor, Muhammad and Othman, Mohammad Lutfi and Hizam, Hashim (2020) A novel RK4-Hopfield neural network for power flow analysis of power system. Applied Soft Computing, 93. art. no. 106346. pp. 1-18. ISSN 1568-4946

Wayayok, Aimrun and Abd Kharim, Muhammad Nurfaiz and Manjang, Lamin (2020) Production of butterhead lettuce and cherry tomato by hydroponic system. The Planter, 96 (1133). 567 - 578. ISSN 0126-575X; ESSN: 2948-3565

Win, Lai Lai and Abdul Aziz, Faieza and Hairuddin, Abdul Aziz and Abdullah, Lili Nurliyana and Yap, Hwa Jen and Saito, Hideo and Seyajah, Norhisham (2020) Immersive virtual reality application development using high tech computer vive and high-end laptop. Nanoscience and Nanotechnology Letters, 12 (5). pp. 628-632. ISSN 1941-4900; ESSN: 1941-4919

Wondi, Mohd Hafizz and Shamsudin, Rosnah and Yunus, Robiah and Alsultan, Abdulkareem Ghassan and Iswardi, Aditya Hutama (2020) Centrifugal separation-assisted and extraction of crude palm oil from separated mesocarp fiber: central composite design optimization. Journal of Food Process Engineering, 43 (7). art. no. 13426. pp. 1-13. ISSN 1745-4530

Yahya, Liyana and Harun, Mohd Razif and Abdullah, Luqman Chuah (2020) Screening of native microalgae species for carbon fixation at the vicinity of Malaysian coal‑fired power plant. Scientific Reports, 10. art. no. 22355. pp. 1-14. ISSN 2045-2322

Yan, Ling Kuan and Sivanasvaran, S. Navin and Liew, Phing Pui and Yusof, Yus Aniza and Senphan, Theeraphol (2020) Physichochemical properties of sodium alganite edible film incorporated with mulberry (Morus australis) leaf extract. Pertanika Journal of Tropical Agricultural Science, 43 (3). 359 - 376. ISSN 1511-3701; ESSN: 2231-8542

Yan, Ling Kuan and Sivanasvaran, S. Navin and Pui, Liew Phing and Yusof, Yus Aniza and Senphan, Theeraphol (2020) Physicochemical properties of sodium alginate edible film incorporated with mulberry (Morus australis) leaf extract. Pertanika Journal of Tropical Agricultural Science, 43 (3). pp. 359-376. ISSN 1511-3701: ESSN: 2231-8542

Yap, Shu Khang and Chin, Nyuk Ling (2020) Kinetic modeling on quality parameters of raw Kelulut honey during dehydration process. Journal of Food Process Engineering, 43 (6). art. no. 13392. pp. 1-11. ISSN 0145-8876; ESSN: 1745-4530

Yaseen, Zaher Mundher and Sihag, Parveen and Yusuf, Badronnisa and Al-Janabi, Ahmed Mohammed Sami (2020) Modelling infiltration rates in permeable stormwater channels using soft computing techniques. Irrigation and Drainage, 70 (1). pp. 117-130. ISSN 1531-0353; ESSN:1531-0361

Yee, Von Thien and Azis, Norhafiz and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Yunus, Robiah and Yaakub, Zaini (2020) Pre-breakdown streamer propagation and positive lightning breakdown characteristics of palm oil impregnated aged pressboard. IEEE Access, 8. 58836 - 58844. ISSN 2169-3536

Yidris, Noorfaizal and Isham, Nur Hazwani and Gires, Ezanee and Mutafi, Ayad (2020) The effects of loading conditions on the behaviour of fixed-ended plain channel columns. Materials, 13 (6). art. no. 1441. pp. 1-19. ISSN 1996-1944

Yousefi, Mamehgol and Mohd Rafie, Azmin Shakrine and Abd Aziz, Samsuzana and Md Ali, Syaril Azrad and Abd Razak, Afifah (2020) Introduction of current pollination techniques and factors affecting pollination effectiveness by Elaeidobius kamerunicus in oil palm plantations on regional and global scale: a review. South African Journal of Botany, 132. 171 - 179. ISSN 0254-6299

Yusof, Nik Syamsul Bahari and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad (2020) Manufacturing process selection of “green” oil palm natural fiber reinforced polyurethane composites using hybrid TEA criteria requirement and AHP method for automotive crash box. Journal of Renewable Materials, 8 (6). 647 - 660. ISSN 2164-6325; ESSN: 2164-6341

Yusuf, Siti Idzura and Shafie, Suhaidi and Abdul Majid, Hasmayadi and Abdul Halin, Izhal (2020) Differential input range driver for SAR ADC measurement setup. Indonesian Journal of Electrical Engineering and Computer Science, 17 (2). 750 - 758. ISSN 2502-4752; ESSN: 2502-4760

Zainal, Bidattul Syirat and Ahmad, Mohd Azwan and Danaee, Mahmoud and Jamadon, Nashrah Hani and Mohd, Nuruol Syuhadaa and Ibrahim, Shaliza (2020) Integrated system technology of POME treatment for biohydrogen and biomethane production in Malaysia. Applied Sciences, 10 (3). art. no. 951. pp. 1-18. ISSN 2076-3417

Zainal A'bidin, Farahana Nabilah and Shamsudin, Rosnah and Mohd Basri, Mohd Salahuddin and Mohd Dom, Zanariah (2020) Mass modelling and effects of fruit position on firmness and adhesiveness of banana variety Nipah. International Journal of Food Engineering, 16 (10). pp. 1-11. ISSN 1556-3758

Zakaria, Noor Syamilah and Saripan, M. Iqbal and Subarimaniam, Neerushah and Ismail, Alyani (2020) Open access for gamification: a systematic review of literature across disciplines. Journal of Critical Reviews, 7 (14). 1259 - 1266. ISSN 2394-5125

Zakaria, Siti Maisurah and Mustapa Kamal, Siti Mazlina and Harun, Mohd Razif and Omar, Rozita and Siajam, Shamsul Izhar (2020) Characterization on phenolic acids and antioxidant activity of Chlorella sp. microalgae using subcritical water extraction. Sains Malaysiana, 49 (4). 765 - 774. ISSN 0126-6039

Zentou, Hamid and Zainal Abidin, Zurina and Yunus, Robiah and Awang Biak, Dayang Radiah and Issa, Mohammed Abdullah (2020) Optimization and modeling of the performance of polydimethylsiloxane for pervaporation of ethanol−water mixture. Journal Of Applied Polymer Science, 138 (19). art. no. 50408. pp. 1-13. ISSN 0021-8995

Zermane, Abderrahim and Mohd Tohir, Mohd Zahirasri and Baharudin, Mohd Rafee and Mohamed Yusoff, Hamdan (2020) Analysis of the contributing factors for fatal accidents due to falls from heights in Malaysia and the USA. Pertanika Journal of Science and Technology, 28 (spec.1). 15 - 36. ISSN 0128-7680; ESSN: 2231-8526

Zghaibi, Nour A. T. and Omar, Rozita and Mustapa Kamal, Siti Mazlina and Awang Biak, Dayang Radiah and Harun, Mohd Razif (2020) Kinetics study of microwave-assisted brine extraction of lipid from the microalgae Nannochloropsis sp. Molecules, 25 (4). art. no. 784. pp. 1-19. ISSN 1420-3049

Zulkifli, Nurazwin and Hashim, Norhashila and Harith, Hazreen Haizi and Mohamad Shukery, Mohamad Firdza (2020) Finite element modelling for fruit stress analysis - a review. Trends in Food Science and Technology, 97. 29 - 37. ISSN 0924-2244

Zulkifli, Nurul Ainina and Mohammed Salleh, Nurhanisah and Mohd Nor, Mohd Zuhair and Omar, Farah Nadia and Sulaiman, Alifdalino and Mokhtar, Mohd Noriznan (2020) Nutritional properties of orange-fleshed sweet potato juice. Advances in Agricultural and Food Research Journal, 1 (1). pp. 1-11. ISSN 2735-1084

Zulkifly, Syazwan Syah and Syed Ismail, Sharifah Norkhadijah and Hasan, Nor Halim and Mahadi @ Othman, Muhammad Razif and Baharudin, Mohd Rafee (2020) Assessing the level of Safety Knowledge Attitude Behaviour (Safety KAB): a case study in a public cleansing firm. Journal of Safety, Health and Ergonomics, 2 (1). pp. 1-7. ISSN 2682-745X

tan, Sok Fern and Nyuk, Ling Chin and Tee, Tuan Poy and Chooi, Sook Kuan (2020) Physico-chemical changes, microbiological properties and storage shelf life of cow and goat milk from industrial high-pressure processing. Processes, 8 (6). art. no. 697. pp. 1-13. ISSN 2227-9717

Book

Abd Rahman, Azmawani and Mohd Zain, Mohd Izani and Hameed Sultan, Mohamed Thariq (2020) Legasi Ihsan. Penerbit Universiti Putra Malaysia, Serdang, Selangor. ISBN 9789672395669

Hejazi, Farzad and Chun, Tan Kar (2020) Conceptual theories in structural dynamics. Advanced Structured Materials . Springer, Singapore. ISBN 9789811554391; EISBN: 9789811554407

Book Section

Mohd Basri, Mohd Salahuddin and Noor Arzahan, Noor Emilia Adila and Mohamed Amin Tawakkal, Intan Syafinaz (2020) Investigation on oil absorption and microstructural properties of polyethylene composites reinforced with post-agricultural waste fillers. In: Advances in Material Sciences and Engineering. Springer, Singapore, 343 - 352. ISBN 9789811382963; EISBN: 9789811382970

Zulkefli, Nur Faraihan and Ahamat, Mohamad Asmidzam and Mohd Safri, Nurul Fatihah and Mohd Nur, Nurhayati and Mohd Rafie, Azmin Shakrine (2020) Aerodynamic performance of shark skin shape vortex generator. In: Proceedings of International Conference of Aerospace and Mechanical Engineering 2019. Springer, Singapore, 105 - 116. ISBN 9789811547553; EISBN: 9789811547560

Conference or Workshop Item

Gambo, Jibrin and Mohd Shafri, Helmi Zulhaidi and Yusuf, Yusuf Ahmed and Abubakar, Ahmed and Babura, Bashir Sabo and Idris, Ahmed Muhammad (2020) Utilization of earth observation technology for mapping spatio-temporal changes of urban water bodies (ponds) and its environmental impacts in Hadejia, Nigeria. In: 2nd IEEE International Conference of Moroccan Geomatics (MORGEO 2020), 11-13 May 2020, Casablanca, Morocco. .

Md Noor, Asiah Maryam and Ibrahim, Idnin Pasya and Abdul Rashid, Nur Emileen and Raja Abdullah, Raja Syamsul Azmir (2020) MIMO FM-CW radar using beat signal averaging method. In: 2020 International Workshop on Antenna Technology (iWAT), 25-28 Feb. 2020, Bucharest, Romania. .

Sherwani, Shah Faisal K. and Sapuan, Salit M. and Leman, Zulkifle and Zainudin, Edi Syams and Abdan, Khalina (2020) Mechanical and morphological properties of different natural fibre reinforced polylactic acid composites: a review. In: The International e-Conference on Green and Renewable Energy, 18-19 Aug. 2020, Bintulu, Sarawak. (pp. 41-47). (Unpublished)

Thesis

Abbas, Bashar Khudhair (2020) Structural, thermal and optical properties of PR³⁺, ER³⁺/DY³⁺ ions singly and doubly doped borotellurite glass system for photonic applications. Doctoral thesis, Universiti Putra Malaysia.

Abd Kharim, Muhammad Nurfaiz (2020) Development of prescription-based liquid fertilizer application in the system of rice intensification. Doctoral thesis, Universiti Putra Malaysia.

Abd Maurad, Zulina (2020) Powder behavior of methyl ester sulfonates generated by high shear mixer. Masters thesis, Universiti Putra Malaysia.

Abd Rahman, Nur Farhana (2020) Physicochemical and antioxidant properties of pomelo residues using different drying methods and kinetic models of naringin degradation. Doctoral thesis, Universiti Putra Malaysia.

Abdelkader, Hassani (2020) Formulation, characterization and cytotoxicity evaluation of orotic acid and magnesium orotate loaded into gum Arabic and chitosan nanoparticles for drug delivery. Doctoral thesis, Universiti Putra Malaysia.

Abdelrahman, Mousa Ahmed Hassan Saad (2020) Enhancement of undrained shear strength and compressibility behaviour of marine clay by biomineralization under electrokinetic method. Masters thesis, Universiti Putra Malaysia.

Abdul Hadi, Muhamad Amir Waliuddin (2020) Development of tungsten (VI) trioxide-based saturable absorber for mode-locked fiber laser. Masters thesis, Universiti Putra Malaysia.

Abu Bakar, Mohd Supian (2020) Crashworthiness performance of kenaf/glass fibre-reinforced epoxy hybrid composite filament winding tube. Doctoral thesis, Universiti Putra Malaysia.

Abu Mansor, Siti Marhainis (2020) Origami pattern parameter modelling of thin-walled structure during axial crushing. Doctoral thesis, Universiti Putra Malaysia.

Adam, Siti Aisyah (2020) Predicting seat transmissibility of seated human body on suspension seat exposed to vertical whole-body vibration. Doctoral thesis, Universiti Putra Malaysia.

Ahmad, Mohd Najib (2020) Development of an automated detector and counter for bagworm census. Doctoral thesis, Universiti Putra Malaysia.

Ahmed, Modather Mairghany Abdin (2020) Development of machinery operations and quality field practices assessment for wetland rice cultivation area in Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Aker, Elhadi Emhemed Alhaaj Ammar (2020) Machine-learning-based adaptive distance protection relay to eliminate zone-3 protection under-reach problem on statcom-compensated transmission lines. Doctoral thesis, Universiti Putra Malaysia.

Al Kubaisi, Yasir Mahmood (2020) Gravitational energy harvesting system based on multistage braking technique for multilevel elevated car parking building. Doctoral thesis, Universiti Putra Malaysia.

Al-Azizi, Jalal Ibrahim (2020) Deep learning approach for automated geospatial data collection. Doctoral thesis, Universiti Putra Malaysia.

Al-Mahrouk, Akram Mohammed (2020) Development of an integrated circuit topology using multilevel inverter and matrix converter. Doctoral thesis, Universiti Putra Malaysia.

Aladdin, Mohd Farid (2020) Prediction of human discomfort perception from combination of noise and translational vibration exposure in a vibro-acoustic environment. Doctoral thesis, Universiti Putra Malaysia.

Alemour, Belal Jamal Tawfiq (2020) Development and characterization of conductive graphene-coated prepreg composites for aviation application. Doctoral thesis, Universiti Putra Malaysia.

Ali, Rabia Daw (2020) Removal of selected polycyclic aromatic hydrocarbons using Phragmites and Vetiver in horizontal sub –surface flow constructed wetland. Doctoral thesis, Universiti Putra Malaysia.

Alsayed, Abdallah S. Z. (2020) Quantification of gentle pull using pinch-pull gripping system based on fugl meyer and manual muscle test protocols for rehabilitation. Doctoral thesis, Universiti Putra Malaysia.

Awang Jumat, Nurkhairunisa (2020) Temperature feedback control of coated shape memory alloy for micro air vehicle flapping wing. Masters thesis, Universiti Putra Malaysia.

Azarnia, Ali (2020) Analytical simulation of non-linearity effects compensation in all-optical orthogonal frequency division multiplexing systems. Doctoral thesis, Universiti Putra Malaysia.

Azni, ‘Atiyyah Ameenah (2020) Empty fruit bunches-derived biochar from microwave-assisted pyrolysis as potential renewable solid fuel for power generation. Masters thesis, Universiti Putra Malaysia.

Bala, Ahmed Jamilu (2020) Termite mounds morphometry in predicting groundwater potentiality using geospatial technology. Doctoral thesis, Universiti Putra Malaysia.

Basri, Ernnie Illyani (2020) Numerical analysis of tubercles leading edge for unmanned aerial vehicle composite wing. Doctoral thesis, Universiti Putra Malaysia.

Cabuga, Sanchez Philip Donald (2020) Internal quality evaluation of sweet potatoes (Ipomoea batatas L.) at different storage temperatures using laser light backscattering imaging technique. Masters thesis, Universiti Putra Malaysia.

Chai, Chee Keong (2020) Characterization and properties of gamma irradiated epoxidized natural rubber latex. Doctoral thesis, Universiti Putra Malaysia.

Chandrasegaran, Tinesh (2020) Load case selection guideline for combined modal finite element approach for static aeroelastic deformations of rectangular HAR wing models. Masters thesis, Universiti Putra Malaysia.

Chu, May Yen (2020) Relationship between national private vehicle ownership, urbanization and economic growth. Doctoral thesis, Universiti Putra Malaysia.

Dzulkifli, Izat Jaris (2020) Development of 360-degree view imaging using L*a*b* color space for fresh fruit bunch identification. Masters thesis, Universiti Putra Malaysia.

Ebrahim, Mohammad Nazri (2020) Evaluation of groundwater recharge based on rainfall and land use changes. Masters thesis, Universiti Putra Malaysia.

Fadul, Saber Mohammed Elnour (2020) Autotuning algorithm for parameters estimation of induction motor based on vector control for electric vehicle powertrain application. Doctoral thesis, Universiti Putra Malaysia.

Ghafari, Mehdi (2020) Effects of soil and fault properties on tunnel displacement induced by normal and reverse faults. Doctoral thesis, Universiti Putra Malaysia.

Hameed, Husamuldeen Khalid (2020) Amplitude independent muscle activity detection algorithm of soft robotic glove system for hemiparesis stroke patients using single sEMG channel. Doctoral thesis, Universiti Putra Malaysia.

Hasan, Muhamad Yusuf (2020) Composting and kinetic dynamic modelling of oil palm empty fruit bunch with periodic addition of anaerobic sludge. Doctoral thesis, Universiti Putra Malaysia.

Hilo, Al Behadili Ali Kareem (2020) Nanofluid flow and heat transfer in corrugated backward-facing step channel using ethylene glycol as based fluid. Doctoral thesis, Universiti Putra Malaysia.

Ho, Bernard Chon Han (2020) Subcritical water extraction of lipid containing omega-3 from microalgae Nannochloropsis gaditana. Doctoral thesis, Universiti Putra Malaysia.

Husin, Nur Azuan (2020) Development of basal stem rot disease detection model using terrestrial laser scanning data of oil palm crown structure. Doctoral thesis, Universiti Putra Malaysia.

Iqbal, Mazhar (2020) Behaviour of solute transport phenomenon from rainfed sweet corn field in tropical climate. Doctoral thesis, Universiti Putra Malaysia.

Ismael, Mohammed Saadi (2020) Fractal antenna for rectenna system applications. Masters thesis, Universiti Putra Malaysia.

Ismail, Habibu (2020) Climate-smart agro-hydrological model for the assessment of future adaptive water allocation for Tanjong Karang rice irrigation scheme. Doctoral thesis, Universiti Putra Malaysia.

Isola, Ajibola Ismaila (2020) Fusion model of unmanned aerial vehicle-based digital elevation model for accuracy improvement mapping. Doctoral thesis, Universiti Putra Malaysia.

Jamaludin, Farah Adilah (2020) Polymer insulator coated by room temperature vulcanization for strengthening voltage withstand capabilities. Doctoral thesis, Universiti Putra Malaysia.

Kassim, Normah (2020) Development of expanded polystyrene cushion design guidelines for reliable flat-screen television packaging. Doctoral thesis, Universiti Putra Malaysia.

Kermasha, Yasir Khaleel Ibrahim (2020) Characterization of physical, mechanical and morphological properties of unstitched and silk fibre-stitched woven Kenaf reinforced epoxy composites. Masters thesis, Universiti Putra Malaysia.

Khan, Tabrej (2020) Characterization of kenaf/jute epoxy hybrid composites for aircraft food tray. Doctoral thesis, Universiti Putra Malaysia.

Krishna, Vidyatharran (2020) Interfacial analysis of carbon nanotubes-reinforced and graphene-reinforced Sn-1.0Ag-0.5Cu solder on electroless nickel/ immersion silver surface finish. Masters thesis, Universiti Putra Malaysia.

Loqman, Nadiah (2020) Effects of bolt sizes and interlocking key joint precast slab shear connectors on the performance of steel-concrete composite beam. Masters thesis, Universiti Putra Malaysia.

Lori, Erfan Shamsaddini (2020) Numerical analysis of frequency and electrical response in piezoelectric-covered components for energy harvesting. Doctoral thesis, Universiti Putra Malaysia.

Mahandran, Sanggithapriya (2020) Transformation of oil palm mesocarp fiber to convertible materials in water at subcritical state. Masters thesis, Universiti Putra Malaysia.

Mahmood, Saif F (2020) Enhanced extreme learning machine for general regression and classification tasks. Doctoral thesis, Universiti Putra Malaysia.

Makzin, Norfaezah (2020) Sustainable groundwater extraction for agriculture use at Bukit Merah Aquifer in Semanggol, Perak, Malaysia. Masters thesis, Universiti Putra Malaysia.

Maringgal, Bernard (2020) Synthesis of Kelulut honey nanoparticles as edible coating on the physicochemical properties and respiration rate of Carica papaya L. Doctoral thesis, Universiti Putra Malaysia.

Mat Yazik, Muhamad Hasfanizam (2020) Thermomechanical properties of shape memory epoxy filled nanoclay / carbon Nanotube hybrid composites for aircraft morphing wing application. Doctoral thesis, Universiti Putra Malaysia.

Mazlan, Shahan (2020) Optimization of stiffened panel fatigue life by using finite element analysis. Doctoral thesis, Universiti Putra Malaysia.

Mhd Ramzam, Muhammad Aidil Hakim (2020) Evaluation of sustainable groundwater extraction for water intake using visual modflow at Tanjung Mas. Masters thesis, Universiti Putra Malaysia.

Mohamad, Nur Aqilah (2020) Dielectric performances of palm oil and coconut oil-based nanofluids with surfactants. Doctoral thesis, Universiti Putra Malaysia.

Mohamad Akbar, Asyraf Aiman (2020) Development of type 1 diabetes mellitus blood glucose level simulation mobile application. Masters thesis, Universiti Putra Malaysia.

Mohamad Dasuki, Norhafizah (2020) Conceptual design of a full-standing commercial aircraft seat. Doctoral thesis, Universiti Putra Malaysia.

Mohamed Sharif, Noor Fadzilah (2020) Enhancing power conversion efficiency for dye-sensitised solar cells using graphene quantum dots. Doctoral thesis, Universiti Putra Malaysia.

Mohammed, Abdulsalam (2020) Treatment of palm oil mill effluent using hybrid aerobic submerged membrane bioreactor. Doctoral thesis, Universiti Putra Malaysia.

Mohd Amin @ Mohd Nasir, Nadia (2020) Fabrication of chitosan-integrated single-mode tapered optical fiber DENV II E protein sensor. Masters thesis, Universiti Putra Malaysia.

Mohd Husin, Ezrin (2020) Prospects for basal stem rot disease based on soil apparent electrical conductivity in oil palm plantation. Doctoral thesis, Universiti Putra Malaysia.

Mohd Nasir, Nur Athirah (2020) Thermodynamic and sustainability analysis of an organic rankine cycle system for turbofan engine. Masters thesis, Universiti Putra Malaysia.

Mohd Nor, Nurfarhana (2020) Development of spatial-based system for business licensing for a Malaysian local town governing authority. Masters thesis, Universiti Putra Malaysia.

Mohd Selva, Amran (2020) Application of statistical distribution models to predict health index for condition-based management of transformers. Masters thesis, Universiti Putra Malaysia.

Mohd Thani, Nurfatimah (2020) Sugar recovery and optimization from bakery leftovers via subcritical water hydrolysis. Doctoral thesis, Universiti Putra Malaysia.

Mohd Yusof, Siti Jamilah Hanim (2020) Development of integrated biorefinery model for the production of bioethanol from oil palm frond. Doctoral thesis, Universiti Putra Malaysia.

Mohd Yusoff, Mohd Zulfahmi (2020) Enhancement of integrated oil palm loose fruit collector machine performance for oil palm plantation. Doctoral thesis, Universiti Putra Malaysia.

Mohd Zad @ Mohd Yazid, Siti Najja (2020) Satellite-based rainfall products assessment for model predictions of rice yield. Masters thesis, Universiti Putra Malaysia.

Mohd Zaini, Nurul Solehah (2020) Minimization of nitrogen-based contaminants in surface water using treated clay particles for phytoremediation enhancement. Masters thesis, Universiti Putra Malaysia.

Mohd Zulkeple, Muhammad Fitri (2020) Effect of film thickness on hysteresis of narrowband thermochromic liquid crystal. Masters thesis, Universiti Putra Malaysia.

Motlagh, Shiva Rezaei (2020) Extraction of lipids and eicosapentaenoic acid from Nannochloropsis oceanica biomass using ionic liquid-based microwave-assisted extraction method. Doctoral thesis, Universiti Putra Malaysia.

Murthy, Avinash Srikanta (2020) Frequency responses of transformer winding deformations based on finite element modeling under transient overvoltage impulses. Doctoral thesis, Universiti Putra Malaysia.

Musa, Mohammed Ali (2020) Biological treatment of cattle slaughterhouse wastewater and biogas production using upflow anaerobic sludge blanket reactors. Doctoral thesis, Universiti Putra Malaysia.

Mustafa, Abid (2020) Appliance level stand-by burst forecast modelling using machine learning techniques. Masters thesis, Universiti Putra Malaysia.

Mustafa, Nuzaimah (2020) Development and characterisation of unsaturated polyester composite incorporating waste rubber glove crumbs as fillers. Doctoral thesis, Universiti Putra Malaysia.

Mutafi, Ayad Abdullah Mohammaed (2020) Finite-element analysis to predict residual stress and strain in press-braked cold-formed steel section. Doctoral thesis, Universiti Putra Malaysia.

Myaser, Jwan (2020) Improvement of land cover mapping using Sentinel 2 and Landsat 8 imageries via non-parametric classification. Doctoral thesis, Universiti Putra Malaysia.

Nadzri, Nur Zulaikhah (2020) Predicting saliency existence using reduced salient features based on compactness and boundary cues. Doctoral thesis, Universiti Putra Malaysia.

Najih, Abdulmawla (2020) Multimodal fingerprint and face biometrics with fragile watermarking and convolutional neural network. Doctoral thesis, Universiti Putra Malaysia.

Nasidi, Nuraddeen Mukhtar (2020) Impact of climate change on soil erosion and sediment yield at Hilly Farms of Cameron Highlands, Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Ngabura, Mohammed (2020) Development of durian peel-based adsorbent for zinc and lead ions removal. Doctoral thesis, Universiti Putra Malaysia.

Noor Iskandar, Abdurrahman (2020) Tropical field assessment in development of dual-pass photovoltaic tray dryer. Masters thesis, Universiti Putra Malaysia.

Ogakwu, Omale Sunday (2020) Carbon dioxide sequestration by mineral carbonation using electric arc furnace slag. Doctoral thesis, Universiti Putra Malaysia.

Olufemi, Osaji Emmanuel (2020) Development of a modified adaptive protection scheme using machine learning technique for fault classification in renewable energy penetrated transmission line. Doctoral thesis, Universiti Putra Malaysia.

Pudza, Musa Yahaya (2020) Green and sustainable tapioca-derived carbon dots immobilised on screen printed electrode for detection of heavy metals using electrochemical method. Doctoral thesis, Universiti Putra Malaysia.

Ridha, Hussein Mohammed (2020) Modeling and multi-objective optimal sizing of standalone photovoltaic system based on evolutionary algorithms. Masters thesis, Universiti Putra Malaysia.

S. Zainal Abidin, Sheikh Mohd Iqbal (2020) Enhancement of knee beam-column joint performance using hybrid fiber-reinforced concrete. Doctoral thesis, Universiti Putra Malaysia.

Shaharuzaman, Mohd Adrinata (2020) Conceptual design of kenaf fibre-reinforced thermoplastic composites using concurrent engineering method for the side-door impact beam. Doctoral thesis, Universiti Putra Malaysia.

Shokshk, Ali Ahmed Mansour (2020) Development of a model to assess work efficiency based on activity energy expenditure and activity wasted energy in horizontal drilling task. Doctoral thesis, Universiti Putra Malaysia.

Tan, Ai Ping (2020) Development of composite motorcycling safety index for addressing motorcycle crash in Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Tengku Mohd, Tengku Azman (2020) Development of optimal energy management topology for battery electric vehicle with load segmentation. Doctoral thesis, Universiti Putra Malaysia.

Teo, Hiu Hong (2020) Development of new hybrid membrane manufacturing system for fabrication and modification of hydrophilic modified polymeric membrane with copper (I) oxide nanoparticles. Doctoral thesis, Universiti Putra Malaysia.

Thien, Yee Von (2020) Pre-breakdown streamer propagation and lightning performance of palm oil with consideration of pressboard and aluminium oxide. Doctoral thesis, Universiti Putra Malaysia.

Thiruvenkadam, Selvakumar (2020) Subcritical water extraction process for microalgal biodiesel production. Doctoral thesis, Universiti Putra Malaysia.

Wan Azman, Wan Mohd Fariz (2020) Design and development of a grating machine for wet sago starch production. Masters thesis, Universiti Putra Malaysia.

Wondi, Mohd Hafizz (2020) Development of semi-continuous mesocarp and nut separator in enhancing the recovery of crude palm oil. Masters thesis, Universiti Putra Malaysia.

Yusuf, Siti Idzura (2020) High accuracy dual output voltage reference circuit for differential 10-bit successive approximation register analog to digital converter using 180nm technology. Doctoral thesis, Universiti Putra Malaysia.

Zainan, Nur Hidayah (2020) Production of amino acids from microalgae Nannochloropsis sp. biomass using subcritical water technology. Doctoral thesis, Universiti Putra Malaysia.

Zamani, Davood (2020) Effect of cold rolling and subsequent annealing treatments on fatigue behaviour and microstructure evolution of a high-mn TWIP steel. Doctoral thesis, Universiti Putra Malaysia.

This list was generated on Mon Dec 23 21:00:46 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0