Items where Division is "Faculty of Engineering" and Year is 2018

Group by: Creators | Item Type | No Grouping

Number of items: 717.

Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad, eds. (2018) Sustainable composites for aerospace applications. Elsevier, Cambridge, United Kingdom. ISBN 9780081021316

A Rahim, Syakura and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Abu Bakar, Elistina and Cooper, Mary Ann (2018) Comparative study on lightning fatality rate in Malaysia between 2008 and 2017. In: 34th International Conference on Lightning Protection (ICLP 2018), 2-7 Sept. 2018, Rzeszow, Poland. .

A., Atiqah and M., Jawaid and S. M., Sapuan and M. R., Ishak (2018) Mechanical and thermal properties of sugar palm fiber reinforced thermoplastic polyurethane composites: effect of silane treatment and fiber loading. Journal of Renewable Materials, 6 (5). 477 - 492.

A. A., Al-jburi Najad and J.K., Hasan Kareem and Mohd Nasir, Noor Azline and Ostovar, Nima (2018) Waste glass as partial replacement in cement – a review. IOP Conference Series: Earth and Environmental Science, 357. art. no. 012023. pp. 1-12. ISSN 1755-1307; ESSN: 1755-1315

A. Abdulbari, Hayder and Mohd Salleh, Mohamad Amran and Rashed, Musaab K. and Ismail, Mohd Halim Shah (2018) Passive, active, and interactive drag-reduction technique to reduce friction and enhance the mixing intensity in rotating disk apparatus. Chemical Engineering Communications, 205 (12). pp. 1-18. ISSN 0098-6445; ESSN: 1563-5201

A. D., Usman and S. M., Sulieman and E. E., Agbon and Wan Ahmad, Wan Fatinhamamah (2018) Throughput efficient AODV for improving QoS routing in energy aware mobile adhoc network. Covenant Journal of Informatics and Communication Technology, 6 (1). 31 - 43. ISSN 22354-3566; EISSN: 354-3507

A. M., Fairuz and Salit @ Sinon, Mohd Sapuan and Zainudin, Edi Syams and Jaafar, Che Nor Aiza (2018) The effect of pulling speed on mechanical properties of pultruded kenaf fiber reinforced vinyl ester composites. Journal of Vinyl and Additive Technology, 24 (s1). 13 - 20. ISSN 1548-0585

Ab Razak, Mohd Shahrizal and Jamaludin, Nurhamizah and Mohd Nor, Nur Ariffah Zaimah (2018) The planform stability of embayed beaches on the west coast of Peninsular Malaysia. Jurnal Teknologi (Sciences & Engineering), 80 (4). pp. 33-42. ISSN 0127-9696; ESSN: 2180-3722

Ab Razak, Mohd Shahrizal and Mohd Nor, Nur Ariffah Zaimah and Jamaluddin, Nurhamizah (2018) Planform stability of embayed beaches along the east coast of Peninsular Malaysia. Journal of Engineering Science and Technology, 13 (2). pp. 435-448. ISSN 1823-4690

Ab. Rahman, Siti Khadijah and Yusof, Nor Azah and Abdullah, Abdul Halim and Mohammad, Faruq and Idris, Azni and Al-Lohedan, Hamad A. (2018) Evaluation of porogen factors for the preparation of ion imprinted polymer monoliths used in mercury removal. PLoS One, 13 (4). pp. 1-14. ISSN 1932-6203

Abang Haji Abdul Majid, Dayang Laila and Manan, Nor Hafizah and Chok, Yee Ling (2018) Honeycomb composite structures of aluminum: aerospace applications. In: Encyclopedia of Aluminum and Its Alloys. CRC Press, 1213 - 1243. ISBN 9781466510807; EISBN: 9781351045636

Abba, Hammajam A. (2018) Characterization of millet husk-filled high density polyethylene and polylactic acid composites. Doctoral thesis, Universiti Putra Malaysia.

Abbas, Nidaa Hasan and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Parveen, Sajida and Wan Adnan, Wan Azizun and Ramli, Abd. Rahman (2018) Design of high performance copyright protection watermarking based on lifting wavelet transform and bi empirical mode decomposition. Multimedia Tools and Applications, 77 (19). 24593 - 24614. ISSN 1380-7501; ESSN: 1573-7721

Abbas, Zaid Ali and Sulaiman, Nasri and Md Yunus, Nurul Amziah and Wan Hasan, Wan Zuha and Ahmed, Mohammed K. (2018) An FPGA implementation and performance analysis between radix-2 and radix-4 of 4096 point FFT. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Abbood, Imad Shakir and Mahmod, Mahir and Hanoon, Ammar N. and Jaafar, Mohd Saleh and Mussa, Mohamed H. (2018) Seismic response analysis of linked twin tall buildings with structural coupling. International Journal of Civil Engineering and Technology (IJCIET), 9 (11). 208 - 219. ISSN 0976-6308; ESSN: 0976-6316

Abd Hamid, Hamidah and Yunus, Robiah and Rashid, Umer and Choong, Thomas Shean Yaw and Ali, Salmiaton and Muhammad Syam, Azhari (2018) Synthesis study of high oleic palm oil-based trimethylolpropane triesters: response surface methodology based optimization. Chiang Mai Journal of Science, 45 (2). 984 - 996. ISSN 0125-2526; ESSN: 2465-3845

Abd Manaf, Syaifulnizam and Mustapha, Norwati and Sulaiman, Md. Nasir and Husin, Nor Azura and Mohd Shafri, Helmi Zulhaidi and Razali, Mohd Norhisham (2018) Hybridization of SLIC and extra tree for object based image analysis in extracting shoreline from medium resolution satellite images. International Journal of Intelligent Engineering and Systems, 11 (1). pp. 62-72. ISSN 2185-3118

Abd Murat, Noor Azammi and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Hameed Sultan, Mohamed Thariq (2018) Conceptual design of automobile engine rubber mounting composite using TRIZ-Morphological chart-analytic network process technique. Defence Technology, 14 (4). 268 - 277. ISSN 2096-3459; ESSN: 2214-9147

Abd Murat, Noor Azammi and Sapuan, S. M. and Ishak, Mohamad Ridzwan and Sultan, M T H (2018) Mechanical properties of kenaf fibre thermoplastic polyurethane-natural rubber composites. POLIMERY (7-8). 45 - 51.

Abd Rahman, Farah Asyikin (2018) Investigation on the electrical performances of a 10 kV polymer insulator with surface moss deposition. Masters thesis, Universiti Putra Malaysia.

Abd Rahman, Nur Farhana and Shamsudin, Rosnah and Ismail, Amin and Abdul Karim Shah, Nor Nadiah and Varith, Jaturapatr (2018) Effects of drying methods on total phenolic contents and antioxidant capacity of the pomelo (Citrus grandis (L.) Osbeck) peels. Innovative Food Science & Emerging Technologies, 50. 217 - 225. ISSN 1466-8564; ESSN: 1878-5522

Abd Rasid, Nor Shaerah (2018) Surface water treatment via phytoremediation process using Nelumbo nucifera gaertn. and Nymphaea aquatic perennial plants. Masters thesis, Universiti Putra Malaysia.

Abd Razak, Janatul Aziera and Rambat, Shuib and Mohamed Shariff, Abdul Rashid (2018) SAR interferometry analysis from 2015 Mw 6.0 earthquake in Ranau, Sabah using Alos Palsar-2 data. In: 7th International Graduate Conference on Engineering, Science and Humanities (IGCESH 2018), 13-15 Aug. 2018, Convention Hall, Faculty of Built Environment and Surveying, Universiti Teknologi Malaysia. (pp. 216-218).

Abd. Aziz, Farah Nora Aznieta and Mohamed Omran, Mohamed Elhibir and Abu Bakar, Nabilah and Safiee, Nor Azizi (2018) Compressive strength and water absorption behaviour of self-curing fibre reinforced concrete. IOP Conference Series: Materials Science and Engineering, 431 (4). pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Abd. Aziz, Farah Nora Aznieta and Mohammed Bida, Sani and Abu Bakar, Nabilah and Jaafar, Mohd Saleh and Hejazi, Farzad (2018) Thermal resistance of two layers precast concrete sandwich panels. International Journal of Engineering and Technology, 10 (4). 320 - 324. ISSN 1793-8236

Abda, Zmnako Mohammed Khurshid and Hizam, Hashim and Gomes, Chandima (2018) Analysis of lightning transient effects on hybrid renewable energy sources. In: 34th International Conference on Lightning Protection (ICLP 2018), 2-7 Sept. 2018, Rzeszow, Poland. .

Abdi, Heshmatollah and Hejazi, Farzad and Jaafar, Mohd Saleh and Abd Karim, Izian (2018) Response modification factors for reinforced concrete structures equipped with viscous damper devices. Periodica Polytechnica-Civil Engineering, 62 (1). pp. 11-25. ISSN ESSN: 1587-3773

Abdol Lajis, Ghaibulna (2018) Identification of basal stem rot disease in oil palm tree using thermal imaging technique. Masters thesis, Universiti Putra Malaysia.

Abdul Khader, Shah Mohammed and Azriff, Adi and Pai, Raghuvir and Zubair, Mohammed and Ahmad, Kamarul Arifin and Ahmad, Zanuldin and Prakashini, Koteshwara (2018) Haemodynamics study in subject-specific abdominal aorta with renal bifurcation using CFD - a case study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (Issue 2). 118 - 121. ISSN 2289-7879

Abdul Aziz, Noor Hafizah (2018) Passive forward scatter radar based on LTE signal for vehicle detection and classification. Doctoral thesis, Universiti Putra Malaysia.

Abdul Bashid, Hamra Assyaima and Lim, Hong Ngee and Hafiz, Syed Muhammad and Kamaruzaman, Sazlinda and Abdul Rashid, Suraya and Yunus, Robiah and Altarawneh, Mohammednoor Khalil and Jiang, Zhongtao and Huang, Nay Ming (2018) Performance stability of solid-state polypyrrole-reduced graphene oxide-modified carbon bundle fiber for supercapacitor application. Electrochimica Acta, 285. pp. 9-15. ISSN 0013-4686

Abdul Hamid, Mohd Faisal (2018) Sensitivity analysis on the model input parameters of flapping wing kinematics for optimum level flight via particle swarming optimization. International Journal of Engineering and Technology (UAE), 7 (4). 57 - 61. ISSN 2227-524X

Abdul Hamid, Nor Hazren and Harun, H. and Sunar, N. M. and Ahmad, Faridah Hanim and Jasmani, Latifah and Suleiman, Norhidayah (2018) Predicting the capability of oxidized CNW adsorbents for the remediation of copper under optimal operating conditions using RSM and ANN models. International Journal of Engineering and Technology (UAE), 7 (4.30). 264 - 268. ISSN 2227-524X

Abdul Laziz, A’liya and Mazlan, Norkhairunnisa and Mohd Yusoff, Mohd Zuhri and Mohamed Ariff, Azmah Hanim (2018) Review on low velocity impact of nanocomposite in addition of nanoclays. International Journal of Engineering and Technology, 7 (4 spec.13). art. no. 21351. 170 - 175. ISSN 2227-524X

Abdul Rahman, Umran (2018) Effects of aerodynamic loading on thin substructure within transonic region of subsonic aircraft. Doctoral thesis, Universiti Putra Malaysia.

Abdul Raof, Nurliyana and Yunus, Robiah and Rashid, Umer and Azis, Norhafiz (2018) Effect of molecular structure on oxidative degradation of polyol ester. In: Asia International Conference on Tribology 2018 (ASIATRIB 2018), 17-20 Sept. 2018, Kuching, Sarawak, Malaysia. (pp. 353-354).

Abdul Razak, Siti Zubaidah (2018) Effects of different stabilisers on physical and mechanical properties of instant ice cream mix powder and ice cream products. Masters thesis, Universiti Putra Malaysia.

Abdulhamed, Ali Jaber (2018) Design and analysis of medium scale water production using solar parabolic trough collector with turbulator baffles. Doctoral thesis, Universiti Putra Malaysia.

Abdulhussain, Sadiq H. (2018) Temporal video segmentation using squared form of Krawtchouk-Tchebichef moments. Doctoral thesis, Universiti Putra Malaysia.

Abdulhussain, Sadiq H. and Ramli, Abd Rahman and Saripan, M. Iqbal and Mahmmod, Basheera M. and Al-Haddad, Syed Abdul Rahman and Wissam, A. Jassim (2018) Methods and challenges in shot boundary detection: a review. Entropy, 20 (4). 241 (1)-241(41). ISSN 1099-4300

Abdullah, Ahmed Shakir (2018) Design of congestion control mechanism for multi-source data fusion infrastructure in telemedicine. Masters thesis, Universiti Putra Malaysia.

Abdullah, Andy-Al-Affendi (2018) Development of visualized earned value management tool for project management. Doctoral thesis, Universiti Putra Malaysia.

Abdullah, Anuar and Omar, Mohamad Fakhrul Zaman and B., Mohd Hannan and Mohd Nor Munawar, Nur Sofeana Zulaika (2018) Comparison study of agricultural waste for composite material. In: National Conference on Agricultural and Food Mechanization 2018 (NCAFM 2018), 17-19 Apr. 2018, Pullman Kuching, Sarawak. (pp. 66-70).

Abdullah, Ermira Junita and Gaikwad, Priyanka Subhash and Azid, N. and Abang Abdul Majid, Dayang Laila and Mohd. Rafie, Azmin Shakrine (2018) Temperature and strain feedback control for shape memory alloy actuated composite plate. Sensors and Actuators A: Physical, 283. 134 - 140. ISSN 0924-4247

Abdullah, Luqman Chuah and Abdi, Mahnaz M. and Mohd Azli, Nor Farhana Waheeda and Ghaemi, Ferial and Abbasian, Maryam and Kargarzadeh, Hanieh (2018) Comparative study of the electrochemical, biomedical, and thermal properties of natural and synthetics nanomaterials. Nanoscale Research Letters, 13 (112). pp. 1-8. ISSN 1556-276X; ESSN: 1931-7573

Abdullah, Luqman Chuah and Feng Ling, Gregory Koay and Zainal Abidin @ Murad, Sumaiya (2018) Dihydroxystearic acid: purification, derivaties and applications. Universiti Putra Malaysia Press, Malaysia. ISBN 9789673448333

Abdullah, Luqman Chuah and Saalah, Sariah and Abdullah, Aishah and Mamat, Suhaini and Jusoh, Emiliana Rose and Awang Biak, Dayang Radiah and Salleh, Mek Zah and Basri, Mahiran (2018) Colloidal stability and rheology of jatropha oil-based waterborne polyurethane (JPU) dispersion. Progress in Organic Coatings, 125. 348 - 357. ISSN 0033-0655; ESSN: 0300-9440

Abdullah, Ummi Noor Nazahiah and Othman, Norashiken and Romli, Fairuz Izzuddin and Handroos, Heikki (2018) Investigation on user experience goals for joystick interface design. Journal of Mechanical Engineering, 5 (1). 133 - 142. ISSN 1823-5514; ESSN: 2550-164X

Abdullah, Zalizawati and Taip, Farah Saleena and Mustapa Kamal, Siti Mazlina and Abdul Rahman, Ribhan Zafira (2018) Effect of sodium caseinate concentration and sonication amplitude on the stability and physical characteristics of homogenized coconut milk. Journal of Food Processing and Preservation, 42 (11). 13373 - 13379. ISSN 0145-8892; ESSN: 1745-4549

Abdulnabi, Adnan Abbas (2018) Effects of particle size and weight percentage of waste rubber crumbs on the performance of compounded tyres. Doctoral thesis, Universiti Putra Malaysia.

Abdulsalam, Mohammed and Che Man, Hasfalina and Idris, Aida Isma and Yunos, Khairul Faezah and Zainal Abidin, Zurina (2018) Treatment of palm oil mill effluent using membrane bioreactor: novel processes and their major drawbacks. Water, 10 (9). art. no. 1165. pp. 1-46. ISSN 2073-4441; EISSN: 2073-4441

Abdulsalam, Mohammed and Che Man, Hasfalina and Mohamed, H. A. and Abd Karim, S. F. and Faiez, M. S. (2018) Microwave irradiated coconut shell-activated carbon for decolourisation of palm oil mill effluent (POME). Food Research, 2 (6). 526 - 534. ISSN ESSN: 2550-2166

Abdulshaheed, Ali Mohammed Ali and Mustapha, Faizal and Mohd Ariffin, Mohd Khairol Anuar (2018) Pipe material effect on water network leak detection using a pressure residual vector method. Journal of Water Resources Planning and Management, 144 (4). pp. 1-15. ISSN 0733-9496; ESSN: 1943-5452

Abiola, Taiwo Ambali (2018) Development of authentication code based on spectral amplitude coding optical code division multiplexing for multi-user pseudo quantum key distribution. Doctoral thesis, Universiti Putra Malaysia.

Abiola, Taiwo Ambali and Al-Nassar, Ghusoon Abdulameer Erhayem and Abu Bakar, Muhammad Hafiz and Abdul Khir, Mohd Fared and Mahdi, Mohd Adzir and Mokhtar, Makhfudzah (2018) Development of authentication code for multi-access optical code division multiplexing based quantum key distribution. Optics and Laser Technology, 101. 312 - 318. ISSN 0030-3992; ESSN: 1879-2545

Abu, Mohd Azlan (2018) Development of low power viterbi decoder on complex programmable logic device platform. Doctoral thesis, Universiti Putra Malaysia.

Abu Bakar, Ayu Haslija (2018) Adsorption of quarternized palm kernel shell for fluoride removal. Doctoral thesis, Universiti Putra Malaysia.

Abu Bakar, Mohd Supian and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams and Ya, Hamdan (2018) Hybrid reinforced thermoset polymer composite in energy absorption tube application: a review. Defence Technology, 14 (4). 291 - 305. ISSN 2214-9147

Abu Hassan, Nur Hidayu (2018) Development of a Hydrogeological conceptual model and groundwater modeling for the Selangor basin, Malaysia. Masters thesis, Universiti Putra Malaysia.

Abu Talib, Abd Rahim and Bheekhun, Nadiir (2018) Feasibility study of a novel aerogel-based thermally sprayed coating. In: World Research and Innovation Convention on Engineering and Technology 2016 (WRICET2016), 22-26 Oct. 2016, Langkawi, Kedah, Malaysia. (pp. 1-8).

Adenan, N. H. and Zainol, Ismail and Abdul Rahim, Nurul Saidah and Jaafar, Che Nor Aiza (2018) Extraction of nanohydroxyapatite from waste bovine bone using alkaline digestion method. Journal of Physics: Conference Series, 1082 (1). pp. 1-7. ISSN 1742-6588; ESSN: 1742-6596

Ahmad, Ahmad Fahad and Ab. Aziz, Sidek and Abbas, Zulkifly and Obaiys, Suzan Jabbar and Khamis, Ahmad Mamoun and Hussain, Intesar Razaq and Mohd Zaid, Mohd Hafiz (2018) Preparation of chemically reduced graphene oxide reinforced Epoxy Resins polymer as a composite for electromagnetic interference shielding and microwave absorbing applicationns. Polymers, 10 (11). pp. 1-19. ISSN ESSN: 2073-4360

Ahmad, Mohamed Tarmizi and Lam, Michael and Abidin, Razali and Mohd Razali, Noor Ashikin and Md Zhahir, Md Amzari (2018) Flexible and extendable advance satellite tracking system. International Journal of Engineering and Technology, 7 (4 spec.13). art. no. 21320. pp. 10-13. ISSN 2227-524X

Ahmad, Mohd Najib and Mohamed Shariff, Abdul Rashid and Moslim, Ramle (2018) Monitoring insect pest infestation via different spectroscopic techniques. Applied Spectroscopy Reviews, 53 (10). 836 - 853. ISSN 0570-4928, ESSN: 1520-569X

Ahmad, Nurul Hafizah and Zainal Abidin, Emilia and Huong, Pei Zam and Karuppiah, Karmegam and Jasni, Azmiza Syawani and Ismail, Noor Hassim and Salit, Mohd Sapuan (2018) DEVELOPMENT OF POROUS CERAMICS AS WALL TILES WITH Development of porous ceramics as wall tiles with humidity controlling and antimicrobial characteristics from modified Diatomaceous Earth (DE): potential to improve indoor air quality. Asia Pacific Environmental and Occupational Health Journal, 4 (3). 41 - 49. ISSN 2462 -2214

Ahmad, Nurul Shahidah (2018) Toxicity assessment of reduced graphene oxide and titanium dioxide nanoparticles on growth of microorganisms. Masters thesis, Universiti Putra Malaysia.

Ahmad, So'bah (2018) Effects of single and sequential oven-microwave drying on drying characteristics and optimization of rambutan seed fat yield. Doctoral thesis, Universiti Putra Malaysia.

Ahmad, Sobah and Anuar, Mohd Shamsul and Taip, Farah Saleena and Shamsudin, Rosnah and Ab Mutalib, Siti Roha (2018) The application of microwave drying process for rambutan (Nephelium lappaceum L.) seed. Journal of Microwave Power and Electromagnetic Energy, 52 (2). 142 - 157. ISSN 0832-7823; ESSN: 2472-4041

Ahmad Farid, Mohammed Abdillah and Hassan, Mohd Ali and Yap, Taufiq Yun Hin and Ibrahim, Mohd Lokman and Hasan, Muhamad Yusuf and Mohd Ali, Ahmad Amiruddin and Othman, Mohd Ridzuan and Shirai, Yoshihito (2018) Kinetic and thermodynamic of heterogeneously K₃PO₄/AC-catalysed transesterification via pseudo-first order mechanism and eyring-polanyi equation. Fuel, 232. 653 - 658. ISSN 0016-2361; ESSN: 1873-7153

Ahmad Kurnin, Nor Azrin (2018) Recovery of valuable material from oil palm empty fruit bunch spikelets using sub-critical water treatment. Masters thesis, Universiti Putra Malaysia.

Ahmad Saffian, Harmaen and Abdan, Khalina and Hassan, Mohd Ali and Ibrahim, Nor Azowa and Lee, Seng Hua and Abdul Rahman, Mohd Faizal (2018) Properties of slow release fertilizer composites made from electron beam-irradiated poly (butylene succinate) compounded with oil palm biomass and fertilizer. BioResources, 13 (4). 8677 - 8689. ISSN ESSN: 1930-2126

Ahmad Shapi'i, Ruzanna and Othman, Siti Hajar and Naim, Mohd Nazli and Kadir Basha, Roseliza (2018) Effect of initial concentration of chitosan on the particle size of chitosan nanoparticle. In: 2nd International Symposium on Advanced Materials and Nanotechnology (i-SAMN 2018), 15-16 Aug. 2018, The Everly Putrajaya, Malaysia. (pp. 76-77).

Ahmad Shapi’i, Ruzanna (2018) Development of starch/chitosan nanoparticle nanocomposite films with antibacterial properties. Masters thesis, Universiti Putra Malaysia.

Ahmadi, Seyedeh Parisa (2018) Evaluation of multiple In Situ and remote sensing system for early detection of Ganoderma boninense infected oil palm. Doctoral thesis, Universiti Putra Malaysia.

Ahmed, Ahmed Abdulkareem (2018) Vehicular traffic noise prediction and propagation modelling using artificial neural network. Masters thesis, Universiti Putra Malaysia.

Ahmed, Ameen Sarhan Abdullah (2018) Optimum calculation of tilt angles and components of standalone photovoltaic system to harvest solar energy. Masters thesis, Universiti Putra Malaysia.

Ahmed, Jamilu Bala and Mansor, Shattri (2018) Overview of the application of geospatial technology to groundwater potential mapping in Nigeria. Arabian Journal of Geosciences, 11. art. no. 504. pp. 1-16. ISSN 1866-7511; ESSN: 1866-7538

Ahmed Alsalhin, Goma Bedawi (2018) Land suitability evaluation for rubber in GIS platform and multicriteria decision-based model. Doctoral thesis, Universiti Putra Malaysia.

Ahmed Alsalhin, Goma Bedawi and Mohamed Shariff, Abdul Rashid and Balasundram, Siva Kumar and Abdullah, Ahmad Fikri (2018) Estimation of soil loss in Seremban, Malaysia using GIS and remote sensing technique. IOP Conference Series: Earth and Environmental Science, 169. pp. 1-10. ISSN 1755-1307; ESSN: 1755-1315

Ahmed II, Jamilu Bala and Pradhan, Biswajeet (2018) Termite mounds as bio-indicators of groundwater: prospects and constraints. Pertanika Journal of Science & Technology, 26 (2). pp. 479-498. ISSN 0128-7680; ESSN: 2231-8526

Ahmed-Abdulazeez, Mariam Ovayioza (2018) Mobility management for seamless handover in carrier aggregation heterogeneous networks deployment scenario of long term evolution-advanced. Doctoral thesis, Universiti Putra Malaysia.

Aiyelabowo, O. P. (2018) A broadband cooperative relay-based system for power line communication. Doctoral thesis, Universiti Putra Malaysia.

Akindokun, Tolulope John (2018) Combination of linear and gradient vector flow field digital mosaic rendering for automated tile placement. Masters thesis, Universiti Putra Malaysia.

Akoredeley, Alabi Abdulmumin (2018) Fracture toughness of iron and copper powder compacts using modified diametrical compression test technique. Doctoral thesis, Universiti Putra Malaysia.

Al-Affendi, Andy and Mohd Ariffin, Mohd Khairol Anuar (2018) Review of Earned Value Management (EVM) tool for project management. International Journal of Engineering Research and Reviews, 6 (3). pp. 4-10. ISSN 2348-697X

Al-Alimi, A. W. and Sarmani, Abdul Rahman and Al-Mansoori, Mohammed Hayder and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2018) Enhanced flatness of 20 Ghz channel spacing multiwavelength Brillouin-Raman fiber laser with sub-millimeter air gap. Optics Express, 26 (23). 30978 - 30990. ISSN 1094-4087

Al-Alimi, Abdulmoghni Ali Wazea and Abu Bakar, Muhammad Hafiz and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Zainol Abidin, Nadiah Husseini and Mahdi, Mohd Adzir (2018) Stable multiwavelength thulium fiber laser assisted by four wave mixing effect. Optics and Laser Technology, 106. 191 - 196. ISSN 0030-3992; ESSN: 1879-2545

Al-Alimi, Abdulmoghni Ali Wazea and Sarmani, Abdul Rahman and Al-Mansoori, Mohhamed Hayder and Narayana, Gandham Lakshmi and Mahdi, Mohd Adzir (2018) Flat amplitude and wide multiwavelength Brillouin/erbium fiber laser based on Fresnel reflection in a micro-air cavity design. Optics Express, 26 (3). 3124 - 3137. ISSN 1094-4087

Al-Aqeeli, Yousif H. and Abd Aziz, Samsuzana and Yusuf, Badronnisa and Wayayok, Aimrun (2018) Evaluation of single reservoir performance for flood risk reduction using a developed simulation model: case study of Makhoul reservoir. Pertanika Journal of Science & Technology, 26 (2). pp. 571-584. ISSN 0128-7680; ESSN: 2231-8526

Al-Habshi, Mohammed Mustafa Abdulrahman (2018) Enhancing geographic coordinates representation standard for reverse geocoding web services. Doctoral thesis, Universiti Putra Malaysia.

Al-Hiti, Ahmed Shakir and Sahbudin, R.K.Z. and Hashim, Fazirulhisyam and Zulkiflee, M. (2018) Performance investigation and analysis of routing protocols in MANET. Journal of Engineering and Applied Sciences, 13 (21). 9038 - 9048. ISSN 1816-949X; ESSN: 1818-7803

Al-Janabi, Ahmed Mohammed Sami (2018) Modeling infiltration capacity of permeable channels under static and dynamic hydraulic conditions. Doctoral thesis, Universiti Putra Malaysia.

Al-Janabi, Ahmed Mohammed Sami and Ghazali, Abdul Halim and Yusuf, Badronnisa and Mohammed, Thamer Ahmed (2018) Permeable channel cross section for maximizing stormwater infiltration and seepage rates. Journal of Irrigation and Drainage Engineering, 144 (3). pp. 1-10. ISSN 0733-9437; ESSN: 1943-4774

Al-Khaled, Al-Fadhl Yahya Khaled (2018) Classification of basal stem rot disease in oil palm using dielectric spectroscopy. Doctoral thesis, Universiti Putra Malaysia.

Al-Khaled, Al-Fadhl Yahya Khaled and Abd Aziz, Samsuzana and Bejo, Siti Khairunniza and Mat Nawi, Nazmi and Abu Seman, Idris and Anuar, Mohamad Izzuddin (2018) Development of classification models for basal stem rot (BSR) disease in oil palm using dielectric spectroscopy. Industrial Crops and Products, 124. 99 - 107. ISSN 0926-6690

Al-Khaled, Al-Fadhl Yahya Khaled and Abd Aziz, Samsuzana and Bejo, Siti Khairunniza and Mat Nawi, Nazmi and Abu Seman, Idris and Chikwendu, Onwude Daniel Iroemeha (2018) Early detection of diseases in plant tissue using spectroscopy – applications and limitations. Applied Spectroscopy Reviews, 53 (1). pp. 1-29. ISSN 0570-4928; ESSN: 1520-569X

Al-Khaled, Alfadhl Yahya Khaled and Abd Aziz, Samsuzana and Bejo, Siti Khairunniza and Mat Nawi, Nazmi and Abu Seman, Idris (2018) Spectral features selection and classification of oil palm leaves infected by Basal stem rot (BSR) disease using dielectric spectroscopy. Computers and Electronics in Agriculture, 144. 297 - 309. ISSN 0168-1699; ESSN: 1872-7107

Al-Khaled, Alfadhl Yahya Khaled and Abd Aziz, Samsuzana and Bejo, Siti Khairunniza and Mat Nawi, Nazmi and Abu Seman, Idris and Anuar, Mohamad Izzuddin (2018) Dielectric constant and chlorophyll content measurements for basal stem rot (BSR) disease detection. In: 2018 International Conference on Signals and Systems (ICSigSys), 1-3 May 2018, Prama Sanur Beach Hotel, Bali, Indonesia. (pp. 69-72).

Al-Mahrouk, Akram Mohammed Abdul Aziz and Mailah, Nashiren Farzilah and Mohd Radzi, Mohd Amran and Hassan, Mohd Khair and Wu, Yuan Kang and Hu, Yi Liang (2018) Modulation index sets of low switching frequency multilevel inverters for wind generation system. In: 10th IEEE PES Asia-Pacific Power and Energy Engineering Conference 2018 (APPEEC), 7-10 Oct. 2018, Kota Kinabalu, Sabah, Malaysia. (pp. 246-251).

Al-Mansoori, M.H. and Al-Sheriyani, A. and Younis, M.a.a. and Mahdi, M.A. (2018) Widely tunable multiwavelength Brillouin-erbium fiber laser with triple Brillouin-shift wavelength spacing. Optical Fiber Technology, 41 (2018). pp. 21-26. ISSN 1068-5200; EISSN: 1095-9912

Al-Medhwahi, Mohammed Ahmed Ali (2018) Scheduling and bandwidth allocation in cognitive radio sensor networks. Doctoral thesis, Universiti Putra Malaysia.

Al-Medhwahi, Mohammed Ahmed Ali and Hashim, Fazirulhisyam and Mohd Ali, Borhanuddin and Sali, Aduwati (2018) Impact of packet size in adaptive cognitive radio sensor network. Wireless Communications and Mobile Computing, 2018. art. no. 3051204. pp. 1-9. ISSN 1530-8669; ESSN: 1530-8677

Al-Mqdashi, Abdulmajid Mohammed Ahmed (2018) Efficient blind rendezvous schemes for cognitive radio ad-hoc networks. Doctoral thesis, Universiti Putra Malaysia.

Al-Nassar, Ghusoon Abdulameer Erhayem (2018) Hybrid subcarrier multiplexing SAC-OCDMA deploying MS-code over free space optical link for Malaysia weather condition. Masters thesis, Universiti Putra Malaysia.

Al-Obaidi, M. R. and Mustafa, Mohd Amrallah and Wan Hasan, Wan Zuha and Azis, Norhafiz and Sabry, Ahmad H. and Ang, Swee Peng and Abdul Hamid, Zainidi (2018) Efficient charging pad for unmanned aerial vehicle based on direct contact. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Al-Ogaili, Ali Saadon and Aris, Ishak and Othman, Mohammed Lutfi and Azis, Norhafiz and Isa, Dino and Hoon, Yap (2018) Design and experimental results of universal electric vehicle charger using DSP. Telkomnika, 16 (4). 1435 - 1444. ISSN 1693-6930; ESSN: 2302-9293

Al-Qazzaz, Noor Kamal and Md. Ali, Sawal Hamid and Ahmad, Siti Anom (2018) Comparison of the effectiveness of AICA-WT technique in discriminating vascular dementia EEGs. In: 2nd International Conference on BioSignal Analysis, Processing and System (ICBAPS 2018), 24-26 July 2018, Kuching, Sarawak, Malaysia. (pp. 109-112).

Al-Qazzaz, Noor Kamal and Md. Ali, Sawal Hamid and Ahmad, Siti Anom and Islam, Mohd Shabiul and Rodriguez, Javier Escudero (2018) Discrimination of stroke-related mild cognitive impairment and vascular dementia using EEG signal analysis. Medical & Biological Engineering & Computing volume, 56 (1). 137 - 157. ISSN 0140-0118; ESSN: 1741-0444

Al-Saadi, Abdulwahab A. Abdulrahman (2018) Design and development of embedded system to control motorized CNG-air mixer for diesel dual-fuel engine. Masters thesis, Universiti Putra Malaysia.

Al-Sulttani, Ali Omran Muhsin (2018) Productivity enhancement and modelling of a new double-slope solar still with rubber scrapers in low latitude areas. Doctoral thesis, Universiti Putra Malaysia.

AlJawadi, Rafea Abdulsattar Mohammed (2018) A mechanical system for harvesting, in-field collecting and in-field transporting of oil palm fresh fruit bunches. Doctoral thesis, Universiti Putra Malaysia.

Alajmi, Fnyees S. M. D. A. and Hairuddin, Abdul Aziz and Adam, Nor Mariah and Abdullah, Luqman Chuah (2018) Recent trends in biodiesel production from commonly used animal fats. International Journal of Energy Research, 42 (3). 885 - 902. ISSN 0363-907X; ESSN: 1099-114X

Albassam, Mohammed Fadil and Lakshminarayana, Gandham and Baki, Sharudin Omar and Bashar, Kh. Bashar and Kityk, Iwan V. and Mahdi, Mohd Adzir (2018) Optical and dielectric studies for Tb3+/Sm3+ co-doped borate glasses for solid-state lighting applications. Optical Materials, 86. 387 - 393. ISSN 0925-3467; ESSN: 1873-1252

Aldailamy, Ali Y. and Abdul Hamid, Nor Asila Wati and Abdulkarem, Mohammed (2018) Distributed indexing: performance analysis of Solr, Terrier and Katta Information Retrievals. Malaysian Journal of Computer Science (spec. 2018). 87- 104. ISSN 0127-9084

Aldailamy, Ali Y. and Abdul Hamid, Nor Asila Wati and Al-Mekhlafi, Mohammed Abdulkarem (2018) Performance evaluation of distributed indexing using Solr and Terrier information retrievals. In: 2018 Fourth International Conference on Information Retrieval and Knowledge Management (CAMP'18), 26-28 Mar. 2018, Le Méridien Kota Kinabalu, Sabah, Malaysia. (pp. 142-149).

Alemour, Belal Jamal Tawfiq and Yaacob, Mohd Hanif and Lim, Hong Ngee and Hassan, Mohd Roshdi (2018) Review of electrical properties of graphene conductive composites. International Journal of Nanoelectronics and Materials, 11 (4). 371 - 398. ISSN 1985-5761; ESSN: 2232-1535

Alhammadi, Abdulraqeb Shaif Ahmed (2018) Off-the-shelf indoor localization system using radio frequency for wireless local area network. Masters thesis, Universiti Putra Malaysia.

Alhiyali, Mohammed Isam and Ishak, Asnor Juraiza and Harun @ Ramli, Hafiz Rashidi and Ahmad, Siti Anom and Wan Sulaiman, Wan Aliaa (2018) Stimulation the prefrontal cortex by EEG-neurofeedback training in high body mass index individuals. In: 2018 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 3-6 Dec. 2018, Kuching, Sarawak, Malaysia. (pp. 189-193).

Ali, Mahmood and Salit, Mohd Sapuan and Karuppiah, Karmegan and Abu, Saleh Ahmed (2018) Design and development of kenaf fiber-reinforced polymer composite polytechnic chairs. Asian Journal of Agriculture and Biology, 6 (spec.). 62 - 65. ISSN 2307-8553

Ali, May and Abdul Rashid, Suraya and Hamidon, Mohd Nizar and Md. Yasin, Faizah and Al-Sudani, Farah Talib Jasim and Victor, Ayodele Bamidele (2018) Ammonia sensing using multilayer graphene grown on Co-Ni/Al2O3 substrate. In: 2nd International Symposium on Advanced Materials and Nanotechnology (i-SAMN 2018), 15-16 Aug. 2018, The Everly Putrajaya, Malaysia. (pp. 72-73).

Ali, Younus Nidham (2018) Laser phase noise effect in self-coherent optical OFDM system. Masters thesis, Universiti Putra Malaysia.

Ali Abbas, Zaid (2018) Fast fourier transform processor implementation for high inputs on field programmable gates array. Masters thesis, Universiti Putra Malaysia.

Ali Mandalawi, Younus Nidham and Yaakob, Syamsuri and Wan Adnan, Wan Azizun and Yaacob, Mohd Hanif and Zan, Zuraidah (2018) Laser phase noise effect and reduction in self- homodyne optical OFDM transmission system. Optics Letters, 44 (2). pp. 307-310. ISSN 0146-9592, ESSN: 1539-4794

Alias, Aisyah Humaira and Md. Tahir, Paridah and Abdan, Khalina and Salit, Mohd Sapuan and Wahab, Md. Saidin and Berkalp, Omer Berk and Lee, Ching Hao and Lee, Seng Hua (2018) Effects of fabric counts and weave designs on the properties of laminated woven kenaf/carbon fibre reinforced epoxy hybrid composites. Polymers, 10 (12). art. no. 1320. pp. 1-19. ISSN 2073-4360

Alias, Aisyah Humaira and Md. Tahir, Paridah and Abdan, Khalina and Salit, Mohd Sapuan and Wahab, Md. Saidin and Saiman, Mohd Pahmi (2018) Evaluation of kenaf yarn properties as affected by different linear densities for woven fabric laminated composite production. Sains Malaysiana, 47 (8). pp. 1853-1860. ISSN 0126-6039

Alias, Nor Asiken and Mansor, Shattri (2018) Estimation of dam sedimentation using remote sensing. In: 39th Asian Conference on Remote Sensing (ACRS 2018), 15-19 Oct. 2018, Renaissance Kuala Lumpur Hotel, Malaysia. (pp. 997-1008).

Aliteh, Nor Aziana (2018) Use of triple flat-type air coil inductive resonance as an oil palm fruit maturity sensor. Masters thesis, Universiti Putra Malaysia.

Aliteh, Nor Aziana and Misron, Norhisam and Aris, Ishak and Mohd Sidek, Roslina and Tashiro, Kunihisa and Wakiwaka, Hiroyuki (2018) Triple flat-type inductive-based oil palm fruit maturity sensor. Sensors, 18. art. no. 2496. pp. 1-18. ISSN 1424-8220

Alizadehmonir, Amir (2018) Effects of annealing temperature and time on properties of composites based on Poly(lactic acid), microcrystalline cellulose and kenaf fiber. Masters thesis, Universiti Putra Malaysia.

Aljaberi, Hassan A. and Hairuddin, Abdul Aziz and Abdul Aziz, Nuraini (2018) Effect of fuel injection strategies on performance and emissions in HCCI engines: a review. International Review of Mechanical Engineering, 12 (4). 341 - 353. ISSN 1970-8734

Alkateb, Mohamed and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan and Jawaid, Mohammad (2018) Vertex angles effects in the energy absorption of axially crushed kenaf fibre-epoxy reinforced elliptical composite cones. Defence Technology, 14 (4). 327 - 335. ISSN 2214-9147

Alkateb, Mohamed and Salit, Mohd Sapuan and Leman, Zulkiflle and Jawaid, Mohammad and Ishak, Mohamad Ridzwan (2018) Crushing behavior of kenaf fiber/wooden stick reinforced epoxy hybrid “green” composite elliptical tubes. Polimery, 63 (6). 436- 443. ISSN 0032-2725

Alkateb, Mohamed and Salit, Mohd Sapuan and Leman, Zulkiflle and Jawaid, Mohammad and Ishak, Mohamad Ridzwan (2018) Quasi-static crush behaviour of environmentally friendly kenaf/wool epoxy composites elliptical tube. Journal of Mechanical Engineering and Sciences, 12 (2). 3671 - 3688. ISSN 2289-4659; ESSN: 2231-8380

Alkbir, Munir Faraj Almbrouk and Salit, Mohd Sapuan and Abdul Aziz, Nuraini and A. M. S, Hamouda and Ishak, Mohamad Ridzwan and Mahdi Ahmad Saad, Elsadig (2018) On the effects of geometrical shapes in failure modes in natural – conventional fiber reinforced composite tube: a review. Current Analytical Chemistry, 14 (3). 241 - 248. ISSN 1573-4110; ESSN: 1875-6727

Alkubaisi, Yasir Mahmood Abdulah and Wan Hasan, Wan Zuha and Mohd Noor, Samsul Bahari and Ab Kadir, Mohd Zainal Abidin and Sabry, Ahmad H. (2018) Review of gravitational electric energy and application perspectives on modern buildings. Journal of Computational and Theoretical Nanoscience, 15 (4). 1081 - 1089. ISSN 1546-1955; ESSN: 1546-1963

Alnaeb, Ali and Raja Abdullah, Raja Syamsul Azmir and Salah, Asem Ahmad Mohamad and Sali, Aduwati and Abdul Rashid, Nur Emileen and Ibrahim, Idnin Pasya (2018) Human activities detection and classification based on micro-Doppler signatures near the baseline of forward scattering radar. In: 2018 International Conference on Radar (RADAR), 27-31 Aug. 2018, Brisbane, Queensland, Australia. .

Alomari, Nashwan K. and Yusuf, Badronnisa and Mohammed, Thamer Ahmed and Ghazali, Abdul Halim (2018) Experimental investigation of scour at a channel junctions of different diversion angles and bed width ratios. CATENA, 166. pp. 10-20. ISSN 0341-8162; ESSN: 1872-6887

Alsawaf, Mena Ahmed Dawad (2018) Effects of spur dikes on hydraulic and morphological characteristics of anabranching channels. Doctoral thesis, Universiti Putra Malaysia.

Alsultan, Hussein Abdulsalam Ali and Mustafa, Mohd Amrallah and Shafie, Suhaidi and Wan Hasan, Wan Zuha and Abdgalil, Ali Khalifa (2018) Graphene doping technique in TiO2 for dye-sensitized solar cells photo-anode. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Alwahib, Ali Abdulkhaleq Abdulhadi and Mustapha Kamil, Yasmin and Abu Bakar, Muhammad Haﬁz and Muhammad Noor, Ahmad Shukri and Yaacob, Mohd Hanif and Lim, Hong Ngee and Huang, Nay Ming and Mahdi, Mohd Adzir (2018) Reduced graphene oxide/maghemite nanocomposite for detection of lead ions in water using surface plasmon resonance. IEEE Photonics Journal, 10 (6). art. no. 4801310. pp. 1-11. ISSN 1943-0655; ESSN: 1943-0655

Amazeeq, Maruwan S. A. B. and Kalantar, Bahareh and Al-Najjar, Husam Abdulrasool H. and Idrees, Mohammed Oludare and Pradhan, Biswajeet and Mansor, Shattri (2018) A geospatial solution using a TOPSIS approach for prioritizing urban projects in Libya. In: 39th Asian Conference on Remote Sensing (ACRS 2018), 15-19 Oct. 2018, Renaissance Kuala Lumpur Hotel, Malaysia. (pp. 86-95).

Aminian, Negin Ozve and Romli, Fairuz Izzuddin (2018) Ergonomics assessment of current aircraft passenger seat design against Malaysian anthropometry data. International Journal of Engineering and Technology (UAE), 7 (4 spec. 13). art. no. 21322. 18 - 21. ISSN 2227-524X

Amran, Y. H. Mugahed and Rashid, Raizal S. M. and Hejazi, Farzad and Ali, A. A. Abang and Safiee, Nor Azizi and Bida, Sani Mohammed (2018) Structural performance of precast foamed concrete sandwich panel subjected to axial load. KSCE Journal of Civil Engineering, 22 (4). pp. 1179-1192. ISSN 1226-7988; ESSN: 1976-3808

Anijiofor, Sandra Chinenyenwa and Nik Daud, Nik Norsyahariati and Idrus, Syazwani and Che Man, Hasfalina (2018) Recycling of fishpond wastewater by adsorption of pollutants using aged refuse as an alternative low-cost adsorbent. Sustainable Environment Research, 28. 315 - 321. ISSN ESSN: 2468-2039

Anuar, Mohd Azrol Syafiee (2018) Wavelet decomposition-NNARX model for flood prediction of Kelantan River, Malaysia. Masters thesis, Universiti Putra Malaysia.

Ariffin, Ahmad Hamdan and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq (2018) The macro-fibre composite-bonded effect analysis on the micro-energy harvester performance and structural health-monitoring system of woven kenaf turbine blade for vertical axis wind turbine application. Advances in Mechanical Engineering, 10 (9). pp. 1-10. ISSN 1687-8140; ESSN: 1687-8140

Ariffin, Ahmad Hamdan and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq (2018) The macro-fibre composite–bonded effect analysis on the micro-energy harvester performance and structural health–monitoring system of woven kenaf turbine blade for vertical axis wind turbine application. Advances in Mechanical Engineering, 10 (9). pp. 1-10. ISSN 1687-8132

Aris, Ishak and Mohamad Yusof, Siti Munirah and Mousavi, Seyedeh Niousha and Ali, Haider Hussein and Sahbudin, Ratna Kalos Zakiah (2018) Low cost wireless EEG system for medical and non-medical applications. IEEJ Transactions on Electronics, Information and Systems, 138 (2). 90 - 93. ISSN 0385-4221; ESSN: 1348-8155

Arockiam, Naveen Jesu and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan (2018) Selection of natural fiber for hybrid kevlar/natural fiber reinforced polymer composites for personal body armor by using analytical hierarchy process. Frontiers in Materials, 5. art. no. 52. pp. 1-13. ISSN ESSN: 2296-8016

Asem, Khmag and Sy Mohamed, Syed Abdul Rahman Al Haddad and Ramlee, Ridza Azri and Kamarudin, Noraziahtulhidayu and Malallah, Fahad Layth (2018) Natural image noise removal using nonlocal means and hidden Markov models in transform domain. The Visual Computer, 34 (12). 1661 - 1675. ISSN 0178-2789; ESSN: 1432-2315

Ashok, Kumar and Dong, M. G. and Sayyed, M. I. and Narayana, Gandham Lakshmi and Xue, X. X. and Mahdi, Mohd Adzir (2018) Gamma-ray shielding effectiveness of lead bismuth germanoborate glasses. Glass Physics and Chemistry, 44 (4). 292 - 299. ISSN 087-6596; ESSN:1608-313X

Asim, Mohammad and Jawaid, Mohammad and Abdan, Khalina and Ishak, Mohammad Ridzwan (2018) The effect of silane treated fibre loading on mechanical properties of pineapple leaf/kenaf fibre filler phenolic composites. Journal of Polymers and the Environment, 26 (4). 1520 - 1527. ISSN 1566-2543; EISSN: 1572-8900

Asim, Mohammed and Jawaid, Mohammad and Abdan, Khalina and Ishak, Mohamad Ridzwan and Alothman, Ammar O. Y. (2018) Effect of hybridization on the mechanical properties of pineapple leaf fiber/kenaf phenolic hybrid composites. Journal of Renewable Materials, 6 (1). 38 - 46. ISSN 2164-6325; ESSN: 2164-6341

Askarizadeh, Mehdi and Abdul Aziz, Faieza (2018) Planning and scheduling operating rooms with mix integer programming and meta-heuristic method. Journal of Computational and Theoretical Nanoscience, 15 (3). 961 - 965. ISSN 1546-1955; ESSN: 1546-1963

Asrofi, Mochamad and Abrar, Hairul and Putra, Yogi Kurnia and Salit, Mohd Sapuan and Kim, Hyun Joong (2018) Effect of duration of sonication during gelatinization on properties of tapioca starch water hyacinth fiber biocomposite. International Journal of Biological Macromolecules, 108. 167 - 176. ISSN 0141-8130; ESSN: 1879-0003

Awang Jumat, Nurkhairunisa and Abdullah, Ermira Junita (2018) Development of an aircraft load planning system for distribution of passenger baggage. International Journal of Engineering and Technology (UAE), 7 (4 spec. 13). art. no. 21338. 95 - 98. ISSN 2227-524X

Aziz, Mohammad Gulzarul and Yusof, Yus Aniza and Blanchard, Christopher L. and Saifullah, Md. and Farahnaky, Asgar and Scheiling, G. (2018) Materials properties and tableting of fruit powders. Food Engineering Reviews, 10 (2). 66 - 80. ISSN 1866-7910; ESSN: 1866-7929

Azizkhani, Sepehr and Mahmoudi, Ebrahim and Abdullah, Norhafizah and Ismail, Mohd Halim Shah and Mohammad, Abdul Wahab and Hussain, Siti Aslina (2018) Removal of cadmium (II) by graphene oxide-chitosan adsorbent from aqueous solution. International Journal of Engineering & Technology, 7 (3.26). pp. 5-8. ISSN ESSN: 0975-4024

Azpen, Qasim Mahalhal (2018) Friction-stir incremental sheet forming of aluminum alloy and metal matrix composite. Doctoral thesis, Universiti Putra Malaysia.

Azpen, Qasim Mhalhal and Baharudin, B. T. Hang Tuah and Sulaiman, Shamsuddin and Mustapha, Faizal (2018) Effect of process parameters on the surface roughness of aluminum alloy AA 6061-T6 sheets in frictional stir incremental forming. Advances in Production Engineering & Management, 13 (4). 405 - 416. ISSN 1854-6250; ESSN: 1855-6531

Azpen, Qasim Mhalhal and Baharudin, B. T. Hang Tuah and Sulaiman, Shamsuddin and Mustapha, Faizal (2018) Reinforcement and hot workability of aluminium alloy 7075 particulate composites: a review. Journal of Engineering Science and Technology, 13 (4). pp. 1034-1057. ISSN 1823-4690

Azrie Safri, Syafiqah Nur and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Jayakrishna, Kandasamy (2018) Impact behaviour of hybrid composites for structural applications: a review. Composites Part B Engineering, 133. 112 - 121. ISSN 359-8368; ESSN: 1879-1069

Baharudin, Mohd Rafee and Nasruddin, Hairul Nazmin and Abdul Rahman, Anita and Mahadi, Mohd Razif and Mohd Noor, Samsul Bahari (2018) Numerical model for individual time calculation for evacuation among secondary students. International Journal of Building Pathology and Adaptation, 36 (5). 450 - 470. ISSN 2398-4708; ESSN: 2398-4716

Baig, Mohammed Salman and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2018) IM/DD dual stream asymmetrically clipped optical OFDM system. Optical Engineering, 57 (8). ISSN 0091-3286; ESSN:1560-2303

Bajuri, Farid (2018) Effect of impregnation of silica into kenaf fibre- reinforced epoxy composites. Masters thesis, Universiti Putra Malaysia.

Bajuri, Farid and Mazlan, Norkhairunnisa and Ishak, Mohamad Ridzwan (2018) Water absorption analysis on impregnated kenaf with nanosilica for epoxy/kenaf composite. IOP Conference Series: Materials Science and Engineering, 405. art. no. 012013. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Basheer, Talal A. (2018) Simulation of mosul dam breaks using basement model. Doctoral thesis, Universiti Putra Malaysia.

Bashi, Omar Ibrahim Dallal (2018) Autonomous flight algorithm of a quadcopter sensing system for methane gas concentration measurements at landfill site. Doctoral thesis, Universiti Putra Malaysia.

Behrooz, Farinaz and Mariun, Norman and Marhaban, Mohammad Hamiruce and Mohd Radzi, Mohd Amran and Ramli, Abdul Rahman (2018) Review of control techniques for HVAC systems-nonlinearity approaches based on fuzzy cognitive maps. Energies, 11 (3). art. no. 495. pp. 1-41. ISSN 1996-1073; ESSN: 1996-1073

Bejo, Siti Khairunniza and Jaleni, M. and Husin, M. E. and Khosrokhani, Maryam and Muharam, Farrah Melissa and Abu Seman, Idris and Anuar, Mohamad Izzuddin (2018) Basal Stem Rot (BSR) detection using iextural inalysis of Unmanned Aerial Vehicle (UAV) image. eProceedings Chemistry, 3 (1). pp. 1186-1197. ISSN 2550-1453

Bejo, Siti Khairunniza and Ramli, Nur Hidayah and Muharam, Farrah Melissa (2018) Wireless sensor network (WSN) applications in plantation canopy areas: a review. Asian Journal of Scientific Research, 11 (2). pp. 151-161. ISSN 1992-1454; ESSN: 2077-2076

Bheekhun, Nadiir and Abu Talib, Abd Rahim and Cardenas, Fortunato (2018) Towards a sustainable aerogel airship: a primer. International Journal of Engineering and Technology (UAE), 7 (4.13). 141 - 145. ISSN 2227-524X

Bheekhun, Nadiir and Abu Talib, Abd Rahim and Hassan, Mohd Roshdi (2018) Tailoring aerogel for thermal spray applications in aero- engines: a screening study. Advances in Materials Science and Engineering, 2018. art. no. 5670291. pp. 1-11. ISSN 1687-8434; ESSN: 1687-8442

Bida, Sani Mohammed (2018) Structural behaviour of precast concrete sandwich panel with high thermal efficiency. Doctoral thesis, Universiti Putra Malaysia.

C, Thinesh and Harmin, Mohamad Yazdi (2018) Nonlinear reduced order model of high aspect ratio rectangular wing plate. International Journal of Engineering and Technology, 7 (4 spec.13). 195 - 201. ISSN 2049-3444

Chan, Yee Ten and Tan, Mei Ching and Chin, Nyuk Ling (2018) Effect of partial sugar replacement with ultrasonically treated citrus pectin on aeration and rheological properties of batter. Journal of Food Processing and Preservation, 42 (12). pp. 1-10. ISSN 0145-8892; ESSN: 1745-4549

Chan, Ying Nee and Harmin, Mohammad Yazdi and Othman, Mohd Safuan (2018) Parametric study of varying ribs orientation and sweep angle of un-tapered wing box model. International Journal of Engineering & Technology (IJET), 7 (4 spec. 13). art. no. 21349. 155 - 159. ISSN 2227-524X

Chang, Lee Sin and Karim, Roselina and Sabo Mohammed, Abdulkarim and Yusof, Yus Aniza and Mohd Ghazali, Hasanah (2018) Storage stability, color kinetics and morphology of spray-dried soursop (Annona muricata L.) powder: effect of anticaking agents. International Journal of Food Properties, 21 (1). 1937 - 1954. ISSN 1094-2912; ESSN: 1532-2386

Che Hamzah, Nurul Husna and Yahya, Azmi and Che Man, Hasfalina and Baharuddin, Azhari Samsu (2018) Effect of pretreatments on compost production from shredded oil palm empty fruit bunch with palm oil mill effluent anaerobic sludge and chicken manure. BioResources, 13 (3). 4998 - 5012. ISSN 1930-2126

Che Hashim, Izrahayu and Mohamed Shariff, Abdul Rashid and Bejo, Siti Khairunniza and Muharam, Farrah Melissa and Ahmad, Khairulmazmi (2018) Severity of Ganoderma boninense disease classification using SAR data. In: 39th Asian Conference on Remote Sensing (ACRS 2018), 15-19 Oct. 2018, Renaissance Kuala Lumpur Hotel, Malaysia. (pp. 2492-2499).

Che Lah, Che Nur Hamizah (2018) Detection of lard via fluorescent fiber probe sensor utilizing graphene quantum dots. Masters thesis, Universiti Putra Malaysia.

Che Mohammad Ishkandar El-Rahimin, Che Dini Maryani (2018) Evaluation of a portable spectrometer for detection of pesticide residue on cabbage. Masters thesis, Universiti Putra Malaysia.

Che Soh, Azimi (2018) Control system of permanent magnet generator using compactrio for SHRE turbine. Masters thesis, Universiti Putra Malaysia.

Che Soh, Azura and Mohamad Radzi, Nur Fadzilah and Mohamad Yusof, Umi Kalsom and Ishak, Asnor Juraiza and Hassan, Mohd Khair (2018) Development of electronic nose for classification of aromatic herbs using Artificial Intelligent techniques. Journal of Engineering Science and Technology, 13 (10). 3043 - 3057. ISSN 1823-4690

Cheok, Choon Yoong and Sulaiman, Rabiha and Manan, N. A. and Zakora, A. J. and Chin, Nyuk Ling and Hussain, Norhayati (2018) Pasting and physical properties of green banana flours and pastas. International Food Research Journal, 25 (6). pp. 2585-2592. ISSN 1985-4668; ESSN: 2231-7546

Chia, Chen Ciang and Gan, Chia Sheng and Gomes, Chandima and Mazlan, Norkhairunnisa and Gomes, Gorakanage Ashen Indimal (2018) Lightning damages in glass fiber-epoxy composite material used for aerospace applications. In: 34th International Conference on Lightning Protection (ICLP 2018), 2-7 Sept. 2018, Rzeszow, Poland. .

Chikwendu, Onwude Daniel Iroemeha and Hashim, Norhashila and Dana, A. (2018) Predicting the quality of pumpkin (Cucurbita moschata) during drying using combined computer vision and backscattering and imaging technique. In: National Conference on Agricultural and Food Mechanization 2018 (NCAFM 2018), 17-19 Apr. 2018, Pullman Kuching, Sarawak. (pp. 100-104).

Chin, Nyuk Ling and Kek, Siok Peng (2018) Chemical and genetic markers for identification of honey origin from its bee speciation. International Journal of Food Engineering, 4 (4). 304 - 307. ISSN 1556-3758

Chin, Nyuk Ling and Yusof, Yus Aniza and Lee, Lai Yee and A. Talib, Rosnita and Christensen, E. S. and Lim, C. H. (2018) Applications and eﬀects of monoglycerides on frozen dessert stability. LWT - Food Science and Technology, 97. 508 - 515. ISSN 1096-1127; ESSN: 0023-6438

Chinenyenwa, Anijiofor Sandra (2018) Adsorption and biodegradation of pollutants from livestock wastewater by aged refuse bioreactor. Doctoral thesis, Universiti Putra Malaysia.

Chon, Bernard Han Ho and Mustapa Kamal, Siti Mazlina and Danquah, Michael K. and Harun, Razif (2018) Optimization of sub-critical water extraction (SWE) of lipid and eicosapentaenoic acid (EPA) from Nannochloropsis gaditana. Biomed Research International, 2018. art. no. 8273581. pp. 1-11. ISSN 2314-6133; ESSN: 2314-6141

Choo, Hong Ning and Abdul Latiff, Nurul Adilah and Varahram, Pooria and Mohd Ali, Borhanuddin (2018) Operations optimization of memory polynomial with binomial reduction in digital pre-distortion for wireless communication systems. In: 2018 IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE 2018), 28-29 Apr. 2018, Penang, Malaysia. (pp. 291-296).

Choong, Thomas Shean Yaw and Yeoh, Chiou Moi and Phuah, Eng Tong and Siew, Wai Lin and Lee, Yee Ying and Tang, Teck Kim and Abdullah, Luqman Chuah (2018) Kinetic study of lipase-catalyzed glycerolysis of palm olein using Lipozyme TLIM in solvent-free system. PLOS ONE, 13 (2). art. no. e0192375. pp. 1-13. ISSN 1932-6203

Cretescu, Igor and Harja, Maria and Teodosiu, Carmen and Isopescu, Dorina Nicolina and Chok, Men Fei and Sluser, Brindusa Mihaela and Mohd Salleh, Mohamad Amran (2018) Synthesis and characterisation of a binder cement replacement based on alkali activation of fly ash waste. Process Safety and Environmental Protection, 119. 23 - 35. ISSN 0957-5820; ESSN: 1744-3598

Dahlan, Nofri Yenita and Amiruddin, Ahmad and Luong, Nguyen Duc and Sakimin, Siti Zaharah (2018) Energy and climate analysis of greenhouse system for tomatoes cultivation using CFD and open studio energy plus software. International Journal of Engineering and Technology (UAE), 7 (3 spec.11). art. no. 15957. 183 - 186. ISSN 2227-524X

Dalef, Huda Hatam and Abdul Aziz, Faieza and Wan Hasan, Wan Zuha and Mohd Ariffin, Mohd Khairol Anuar (2018) Controlling of robot hand by using microcontroller with visual basic. Journal of Computational and Theoretical Nanoscience, 15 (2). 648 - 655. ISSN 1546-1955; ESSN: 1546-1963

Dalef, Huda Hatem and Abdul Aziz, Faieza and Wan Hasan, Wan Zuha and Mohd Ariffin, Mohd Khairol Anuar (2018) Development of wireless controlling and monitoring system for robotic hand using Zigbee protocol. Journal of Computational and Theoretical Nanoscience, 15 (2). 656 - 662. ISSN 1546-1955; ESSN: 1546-1963

Daniel Iroemeha Chikwendu, Onwude and Hashim, Norhashila and Abdan, Khalina and Janius, Rimfiel and Chen, Guangnan (2018) The potential of computer vision, optical backscattering parameters and artificial neural network modelling in monitoring the shrinkage of sweet potato (Ipomoea batatas L.) during drying. Journal of the Science of Food and Agriculture, 98 (4). 1310 - 1324. ISSN 0022-5142; EISSN: 1097-0010

Daud, Siti Nurul Adura (2018) Process performance and characterization of microwave hybrid and conventional sintering methods on iron/silicon carbide. Masters thesis, Universiti Putra Malaysia.

Dehghan, Shayan and Ismail, Mohd Idris Shah and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T. Hang Tuah (2018) Experimental investigation on friction drilling of titanium alloy. Engineering Solid Mechanics, 6 (2). 135 - 142. ISSN 2291-8744; ESSN: 2291-8752

Dele-Afolabi, Temitope Theophilus and Mohamed Ariff, Azmah Hanim and Mazlan, Norkhairunnisa and Sobri, Shafreeza and Calin, Recep and Zahari, Nur Ismarrubie (2018) Tensile strength and corrosion resistance properties of porous Al2O3/Ni composites prepared with rice husk pore-forming agent. Ceramics International, 44 (10). 11127 - 11135. ISSN 0272-8842

Dibs, Hayder and Al-Janabi, Ahmed and Gomes, Gorakanage Arosha Chandima (2018) Easy to use remote sensing and GIS analysis for landslide risk assessment. Journal of Babylon University for Engineering Science, 26 (1). 42 - 54. ISSN ‎2616-9916

Ding, Rui and Ujang, Norsidah and Hamid, Hussain and Abd. Manan, Mohd Shahrudin and He, Yuou and Li, Rong and Wu, Jianjun (2018) Detecting the urban traffic network structure dynamics through the growth and analysis of multi-layer networks. Physica A: Statistical Mechanics and its Applications, 503. 800 - 817. ISSN 0378-4371; ESSN: 1873-2119

Dira, Yasir Sabah (2018) Combination of perturb and observe with online sequential extreme learning machine for photovoltaic system maximum power point tracking. Masters thesis, Universiti Putra Malaysia.

Dolah, Mohd Shahrizal and Md. Yusoff, Rosman and Abdul Hadi, Mohd Heideizul Jamal and Ishak, Muhammad Ikman (2018) Computational analysis in design and manufacturing processes. IOP Conference Series: Materials Science and Engineering, 2030 (9). pp. 1-6. ISSN 0094-243X; ESSN: 1551-7616

Duraikannan, Shankar and Ahmad Anas, Siti Barirah and Mohd Ali, Borhanuddin and Zan, Zuraidah and Thiruchelvam, Vinesh (2018) Cascaded dual drive MZM and dual parallel MZM architecture for optical linearization of MZM nonlinearity. In: 2018 IEEE 7th International Conference on Photonics (ICP), 9-11 Apr. 2018, Langkawi, Kedah, Malaysia. .

Ebrahimian, Mahboubeh and Nuruddin, Ahmad Ainuddin and Mohd Soom, Mohd Amin and Mohd Sood, Alias and Liew, Ju Neng and Galavi, Hadi (2018) Trend analysis of major hydroclimatic variables in the Langat River basin, Malaysia. Singapore Journal of Tropical Geography, 39 (2). pp. 192-214. ISSN 0129-7619; ESSN: 1467-9493

Eddie, Farah Hijanah (2018) Empowering community for slope information crowd-sourcing and monitoring based on web GIS. Masters thesis, Universiti Putra Malaysia.

Edhirej, Ahmed and Salit, Mohd Sapuan and Jawaid, Mohammad and Zahari, Nur Ismarrubie (2018) Preparation and characterization of cassava starch / peel composite film. Polymer Composites, 39 (5). 1704 - 1715. ISSN 0272-8397; ESSN: 1548-0569

Elaswed, Nadia Ahmed (2018) Simulation of seawater intrusion in Jifara Plain, Libya. Doctoral thesis, Universiti Putra Malaysia.

Eldeen, Gailan Ismat Safa (2018) Evaluation of recycled crushed concrete as aggregate substitute in asphalt mixtures. Doctoral thesis, Universiti Putra Malaysia.

Eldeen, Gailan Ismat Safa and Mohd Jakarni, Fauzan and Muniandy, Ratnasamy and Hassim, Salihudin (2018) Evaluation of Marshall Compactor effect on the degradation of recycled concrete aggregate. Journal of Civil, Construction and Environmental Engineering, 3 (5). 133 - 146. ISSN 2637-3882; ESSN: 2637-3890

Enshaei, Sharareh and Farid, Mahboubeh and Wah, June Leong and Ardestani, S. Mohsen Hashemi (2018) Higher order curvature information and its application in a modified diagonal Secant method. Optimization, 67 (12). 2229 - 2246. ISSN 0233-1934; ESSN: 1029-4945

Esua, Okon Johnson and Chin, Nyuk Ling and Yusof, Yus Aniza (2018) Simultaneous UV-C and ultrasonic energy treatment for disinfection of tomatoes and its antioxidant properties. Journal of Advanced Agricultural Technologies, 5 (3). 209 - 214. ISSN 2373-423X

Fadhil, Rasha Mohammadsime (2018) Daily operation of Bukit Merah reservoir with stochastic dynamic programming under climate change impact. Doctoral thesis, Universiti Putra Malaysia.

Fadul, Saber Mohammed Elnour and Aris, Ishak and Misron, Misron and Abdul Halin, Izhal and A. K. M., Parez Iqbal (2018) Modelling and simulation of powertrain system for electric car. Journal of the Society of Automotive Engineers Malaysia, 2 (1). 23 - 34. ISSN 2550-2239

Fallah, Seyedeh Narjes and Gomes, Chandima and Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Ahmed, Rebaz Jamal and Jasni, Jasronita (2018) Minimum separation between lightning protection system and non-integrated metallic structures. In: 34th International Conference on Lightning Protection (ICLP 2018), 2-7 Sept. 2018, Rzeszow, Poland. .

Fathi, Sharihan and Harun, Aizul Nahar and Rambat, Shuib and Mohd Nawi, Mohd Nasrun and Haron, Nuzul Azam (2018) Development of a mobile Aquaculture Management Systems for performance monitoring of aquaculture players. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-11). 113 - 117. ISSN 2180-1843; ESSN: 2289-8131

Flayih, Sura Hmoud (2018) Hydrous ferric oxide composite-integrated surface plasmon resonance sensor for arsenic ion detection. Doctoral thesis, Universiti Putra Malaysia.

Foo, Chuan Yi and Lim, Hong Ngee and Mahdi, Mohd Adzir and Wahid, Mohd Hanif and Huang, Nay Ming (2018) Three-dimensional printed electrode and its novel applications in electronic devices. Scientific Reports, 8. art. no. 7399. 1-Nov. ISSN EISSN: 2045-2322

Fuad, Nurafifah and Omar, Rozita and Kamarudin, Suryani and Harun, Razif and Idris, Azni and Wan Ab Karim Ghani, Wan Azlina (2018) Mass harvesting of marine microalgae using different techniques. Food and Bioproducts Processing, 112. 169 - 184. ISSN 0960-3085; ESSN: 1744-3571

Gadam, Mohammed Aliyu and Noordin, Nor Kamariah and Maijamaa, Ladan (2018) Combined channel gain and QoS-based access-aware cell selection in LTE-advanced HetNets. In: 2018 IEEE 5G World Forum (5GWF), 9-11 July 2018, Santa Clara, California, USA. (pp. 532-535).

Gatea, Sarah Jabbar (2018) Development of optimized damage prediction method for health monitoring of ultra high performance fiber-reinforced concrete communication tower. Doctoral thesis, Universiti Putra Malaysia.

Ghaemi, Ferial and Amri, Mohamad Ridzuan and Abdullah, Luqman Chuah (2018) Synthesis of metal organic framework (MOF-199) coated with cellulose nanocrystal. In: 2nd International Symposium on Advanced Materials and Nanotechnology (i-SAMN 2018), 15-16 Aug. 2018, The Everly Putrajaya, Malaysia. (pp. 30-31).

Ghasemi, Maryam Khadem (2018) Development of a sustainable healthcare waste management model using hybrid multiple decision making model. Doctoral thesis, Universiti Putra Malaysia.

Ghavamian, Aidin (2018) Numerical simulation and experimental investigation of ultrasonic guided wave propagation in pipes with defects. Doctoral thesis, Universiti Putra Malaysia.

Gomes, Gorakanage Ashen Indimal and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Abda, Zmnako Mohammed Khurshid (2018) Development of a portable type I to III lightning surge protective device for compact structures. In: 34th International Conference on Lightning Protection (ICLP 2018), 2-7 Sept. 2018, Rzeszow, Poland. .

Gomes, Gorakanage Ashen Indimal and Lim, E Yee and Islam, T. and Md. Tahir, Paridah and Choo, Adrian Cheng Yong and Abdul Halip, Juliana and Gomes, Chandima and Gomes, Ashen E. and Ab Kadir, Mohd Zainal Abidin (2018) Impulse flashover characteristics of oil palm trunk (OPT) veneer plywood. In: 34th International Conference on Lightning Protection (ICLP 2018), 2-7 Sept. 2018, Rzeszow, Poland. .

H'ng, Sin Ying and Anuar, Mohd Shamsul and Mohd Nor, Mohd Zuhair (2018) Drying, colour and sensory characteristics of ‘Berangan’ banana (Musa accuminata) flesh dried using a microwave oven. Malaysian Journal of Halal Research (MJHR), 1 (1). pp. 10-14. ISSN 2616-1923

Haider, Nawras Haidar Mostafa Meir Al-Said and Zahari, Nur Ismarrubie and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq (2018) Theoretical development of biaxial fabric prestressed composites under tension-tension fatigue loading. Pertanika Journal of Science & Technology, 26 (3). pp. 1253-1264. ISSN 0128-7680; ESSN: 2231-8526

Hairuddin, Abdul Aziz and Shafanejad, Mohammed Amin (2018) Improvement of engine performance of a single-cylinder compression ignition engine using 3D-printed helical thread intake manifold. In: 5th Mechanical Engineering Research Day (MERD'18), 3 May 2018, Kampus Teknologi UTeM, Melaka. (pp. 40-41).

Hajikhani, Maryam and Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin (2018) Influence of hiring, selection process and safety training on lightning safety performance in Iranian manufacturing companies. In: 34th International Conference on Lightning Protection (ICLP 2018), 2-7 Sept. 2018, Rzeszow, Poland. .

Hameed, Husamuldeen Khalid and Wan Hasan, Wan Zuha and Shafie, Suhaidi and Ahmad, Siti Anom and Jaafar, Haslina (2018) Soft robotic glove system controlled with amplitude independent muscle activity detection algorithm by using single sEMG channel. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Hanipah, Suhaiza Hanim (2018) Micromechanics of oil palm mesocarp fibres and biocomposites. Doctoral thesis, Universiti Putra Malaysia.

Harmin, Mohammad Yazdi and Othman, Mohd Safuan and Romli, Fairuz Izzuddin (2018) Parametric study on the flutter characteristics of a simple rectangular wing-box model with varying ribs orientation. International Journal of Pure and Applied Mathematics, 119 (spec. 15). 3771 - 3777. ISSN 1311-8080; ESSN: 1314-3395

Harun @ Ramli, Hafiz Rashidi and Arof, M. A. M. and Saripan, M. Iqbal and Bello, Fernando (2018) Design of a modular testing platform for the handling and study of endovascular devices. In: 2018 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 3-6 Dec. 2018, Kuching, Sarawak, Malaysia. (pp. 255-258).

Hasan, Intan Helina and Hamidon, Mohd Nizar and Ismail, Alyani and Ismail, Ismayadi and Mekki, Anwer Sabah and Mohd Kusaimi, Muhammad Asnawi and Azhari, Saman and Osman, Rosiah (2018) YIG thick film as substrate overlay for bandwidth enhancement of microstrip patch antenna. IEEE Access, 6. pp. 32601-32611. ISSN 2169-3536

Hasan, Intan Helina and Hamidon, Mohd Nizar and Mohd Kusaimi, Muhammad Asnawi and Azhari, Saman and Mohd Azhari, Nur Alin and Osman, Rosiah and Md Yusof, Juraina and Ismail, Ismayadi (2018) Effect of firing temperature to surface morphology of nanosized YIG based thick film with linseed oil as organic vehicle. In: 2nd International Symposium on Advanced Materials and Nanotechnology (i-SAMN 2018), 15-16 Aug. 2018, The Everly Putrajaya, Malaysia. (pp. 58-59).

Hashim, Doaa Talib (2018) Performance of bolted connection in ultra high performance fiber-reinforced concrete communication tower. Doctoral thesis, Universiti Putra Malaysia.

Hashim, Norhashila and Abdan, Khalina and Janius, Rimfiel and Chen, Guangnan and Onwude, Daniel I. (2018) Investigating the influence of novel drying methods on sweet potato (Ipomoea batatas L.): kinetics, energy consumption, color, and microstructure. Journal of Food Process Engineering, 41 (4). pp. 1-12. ISSN 0145-8876; ESSN: 1745-4530

Hashim, Norhashila and Abdan, Khalina and Janius, Rimfiel and Iroemeha, Onwude Daniel and Chen, Guangnan (2018) Combination of computer vision and backscattering imaging for predicting the moisture content and colour changes of sweet potato (Ipomoea batatas L.) during drying. Computers and Electronics in Agriculture, 150. 178 - 187. ISSN 0168-1699

Hashim, Norhashila and Chikwendu, Onwude Daniel Iroemeha and Osman, Muhamad Syafiq (2018) Evaluation of chilling injury in mangoes using multispectral imaging. JOURNAL OF FOOD SCIENCE, 83 (5). 1271 - 1279. ISSN 0022-1147; ESSN: 1750-3841

Hassan, Cik Suhana (2018) Experimental analysis of unidirectional oil palm empty fruit bunch fibre-reinforced polymer composites and crash performance using finite element method. Doctoral thesis, Universiti Putra Malaysia.

Hassan, Cik Suhana and Durai, Veyvein and Salit, Mohd Sapuan and Abdul Aziz, Nuraini and Mohamed Yusoff, Mohd Zuhri (2018) Mechanical and crash performance of unidirectional oil palm empty fruit bunch fibre-reinforced polypropylene composite. BioResources, 13 (4). 8310 - 8328. ISSN 1930-2126

Hassan, Cik Suhana and Salit, Mohd Sapuan and Abdul Aziz, Nuraini and Mohamed Yusoff, Mohd Zuhri (2018) Effect of chemical treatment on the tensile properties of single oil palm empty fruit bunch (OPEFB) fibre. Trends in Textile Engineering and Fashion Technology, 3 (2). pp. 1-7. ISSN 2578-0271

Hassan, Mohd Nizam (2018) Influence of stiffener on aluminium perforated plates subjected to in-plane shear loading. Masters thesis, Universiti Putra Malaysia.

Hassan, Muhamad Yusuf and Hassan, Mohd Ali and Mokhtar, Mohd Noriznan and Idris, Azni and Shirai, Yoshihito and Dzulkarnain, Zulnaim and Samsudin, Mohd Hafif and Mohd Zainudin, Mohd Huzairi (2018) Periodic addition of anaerobic sludge enhanced the lignocellulosic degradation rate during co-composting of oil palm biomass. Asian Pacific Journal of Molecular Biology & Biotechnology, 26 (3). pp. 1-10. ISSN 0128-7451; ESSN: 2672-7277

Hassan, Siti Lailatul and Sulaiman, Nasri and Shariffudin, Shafinaz Sobihana and Tuan Yaakub, Tuan Norjihan (2018) Signal-to-noise ratio study on pipelined fast fourier transform processor. Bulletin of Electrical Engineering and Informatics, 7 (2). 230 - 235. ISSN 2089-3191; ESSN: 2302-9285

Hassani, Abdelkader and Hussain, Siti Aslina and Abdullah, Norhafizah and Kamarudin, Suryani (2018) Review on micro-encapsulation with chitosan for pharmaceuticals applications. MOJ Current Research and Reviews, 1 (2). 77 - 84. ISSN 2641-9297

Hassim, Salihudin and Muniandy, Ratnasamy and Ales @ Alias, Aidi Hizami and Abdullah, Pedram (2018) Construction tender price estimation standardization (TPES) in Malaysia: modeling using fuzzy neural network. Engineering, Construction and Architectural Management, 25 (3). 443 - 457. ISSN ISSN: 0969-9988; ESSN: 1365-232X

Hatam Dalef, Huda (2018) A robotic manipulator trajectory monitoring system in virtual environment. Doctoral thesis, Universiti Putra Malaysia.

Hejazi, Farzad and Karimzade, Keyhan (2018) Analysis procedure for earthquake resistant structures. Springer, Singapore. ISBN 9789811088384; EISBN: 9789811088391

Hilal, Yousif Y. and Wan Ismail, Wan Ishak and Yahya, Azmi and Ash’aari, Zulfa Hanan (2018) Development of genetic algorithm for optimization of yield models in oil palm production. Chilean Journal of Agricultural Research, 78 (2). 228 - 237. ISSN 0718-5820 ; ESSN: 0718-5839

Hilo, Ali and Abu Talib, Abd Rahim and Nfawa, Sadeq Rashid and Hameed Sultan, Mohamed Thariq and Abdul Hamid, Mohd Faisal (2018) Review of improvements on heat transfer using nanofluids via corrugated facing step. International Journal of Engineering and Technology, 7 (4 spec.13). art. no. 21350. 160 - 169. ISSN 2227-524X

Ho, Kian Tsong (2018) Electric field distribution on porcelain-type insulator under corona discharge. Masters thesis, Universiti Putra Malaysia.

Hoh, Kian Fei and Syam, Syafiie and Phuah, Eng Tong and Choong, Thomas Shean Yaw (2018) Computer modelling of phase change materials using the orthogonal collocation method. Journal of Engineering and Applied Sciences, 13 (11). 3617 - 3625. ISSN 1819-6608

Hommood, Momtaz Isaak (2018) Suitability of mechanized sweet corn cultivation in Sekinchan, Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Hoon, Yap and Mohd Radzi, Mohd Amran (2018) PLL-less three-phase four-wire SAPF with STF-ԁԛ0 technique for harmonics mitigation under distorted supply voltage and unbalanced load conditions. Energies, 11 (8). art. no. 2143. pp. 1-27. ISSN 1996-1073; ESSN: 1996-1073

Hoon, Yap and Mohd Radzi, Mohd Amran and Hassan, Mohd Khair and Mailah, Nashiren Farzilah (2018) PLL-less SRF technique for operation of SAPF under unbalanced and distorted supply voltage. In: 5th IET International Conference on Clean Energy and Technology (CEAT2018), 5-6 Sept. 2018, Kuala Lumpur, Malaysia. .

Husain Suhayla, Alaa A. F (2018) TiO₂ photoanode for transparent dye sensitised solar cells. Masters thesis, Universiti Putra Malaysia.

Husin, Nur Azuan and Bejo, Siti Khairunniza and Noor Azmi, Aiman Nabilah and Ahmad, Desa (2018) Comparison between linear and quadratic models for Ganoderma classification. In: 39th Asian Conference on Remote Sensing (ACRS 2018), 15-19 Oct. 2018, Renaissance Kuala Lumpur Hotel, Malaysia. (pp. 771-780).

Hussain, Intesar Razaq and Awang Biak, Dayang Radiah and Hameed Kamil, Faten and Md. Yasin, Faizah and Kamarudin, Suryani and Mohamed Yusoff, Hamdan (2018) Physical properties of reduced graphite oxide prepared via chemical reduction by using ammonia solution as a reducing agent. IOP Conference Series: Materials Science and Engineering, 454. art. no. 12136. pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Hussain, Siti Aslina and Azizkhani, Sepehr and Mohammad, Abdul Wahab and Mahmoudi, Ebrahim and Emami, Arefah (2018) Adsorption of copper from aqueous solution by chitosan using molecular imprinting technology. Science and Technology Indonesia, 3 (4). 141 - 146. ISSN 2580-4405; ESSN: 2580-4391

Hussein, Ahmed Faeq (2018) A robust high accuracy cardiovascular disease detection system based on ECG energy concentration time-frequency analysis supported by threshold and intelligent classifier. Doctoral thesis, Universiti Putra Malaysia.

Hussein, Ahmed Faeq and N., Arunkumar and Gomes, Gorakanage Arosha Chandima and Alzubaidi, Abbas K. and Habash, Qais Ahmed and Granados, Luz Santamaria and Moreno, Juan Francisco Mendoza and Gonzalez, Gustavo Ramirez (2018) Focal and non-focal epilepsy localization: a review. IEEE Access, 6. 49306 - 49324. ISSN 2169-3536

Hussein, O. and Wan Hasan, Wan Zuha and Che Soh, Azura and Jafaar, H. and Harun @ Ramli, Hafiz Rashidi and Rahman, F. A. and Ang, Swee Peng and Abdul Hamid, Zainidi (2018) Development of an in-sole plantar pressure measurement device. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Ibrahim, Mohamed Ibrahim J. and Mohamed Yusoff, Mohd Zuhri (2018) Optimization of interlocking structures made of flax fibre composites to improve its energy absorption capability. Journal of Advanced Research in Applied Sciences and Engineering Technology, 10 (1). pp. 1-17. ISSN 2462-1943

Ibrahim, Mohd Khairul Alhapiz and Hamid, Hussain and Law, Teik Hua and Wong, Shaw Voon (2018) Evaluating the effect of lane width and roadside configurations on speed, lateral position and likelihood of comfortable overtaking in exclusive motorcycle lane. Accident Analysis and Prevention, 111. 63 - 70. ISSN 0001-4575

Ibrahim, R. E. and Rosmamuhamadani, R. and Talari, M. K. and Md Yahaya, Sabrina and Sulaiman, Shamsuddin and Ismail, Mohd Idris Shah (2018) Corrosion behaviour of Al-Si cast alloy reinforced with titanium diboride (TiB2) and scandium (Sc). Journal of Engineering and Science Research, 2 (2). pp. 1-8. ISSN 2289-7127

Idris, Sarada and Azeman, Nur Hidayah and Noor Azmy, Noor Azwen and Ratnam, Chantara Thevy and Mahdi, Mohd Adzir and A. Bakar, Ahmad Ashrif (2018) Gamma irradiated Py/PVA for GOx immobilization on tapered optical fiber for glucose biosensing. Sensors and Actuators B: Chemical, 273. 1404 - 1412. ISSN 0925-4005

Idrus, Syazwani and Zhe, Sim Jian and Rosli, Nurul Shafiqah and Nik Daud, Nik Norsyahariati (2018) Co-digestion of rice straw leachate and domestic wastewater for biogas production with addition of urea as nitrogen source. International Journal of Engineering and Technology, 10 (1). pp. 76-81. ISSN 2319-8613

Ike, C. C. and Ezeibe, C. C. and Anijiofor, S. C. and Daud, N. N. Nik (2018) Solid waste management in Nigeria: problems, prospects, and policies. Journal of Solid Waste Technology and Management, 44 (2). pp. 163-172. ISSN 1088-1697

Imhan, Khalil Ibraheem and Baharudin, B. T. Hang Tuah and Zakaria, Azmi and Ismail, Mohd Idris Shah and Hadi Alsabti, Naseer Mahdi and Ahmad, Ahmad Kamal (2018) Improve the material absorption of light and enhance the laser tube bending process utilizing laser softening heat treatment. Optics and Laser Technology, 99. 15 - 18. ISSN 0030-3992; ESSN: 1879-2545

Iranmanesh, Vahab (2018) Zero distortion-based steganography for handwritten signature. Doctoral thesis, Universiti Putra Malaysia.

Ishak, Farah Diana and Romli, Fairuz Izzudin and Abdul Rahman, Kawthar (2018) Public survey on new in-flight food delivery and waste collection system. Journal of Mechanical Engineering, 5 (4 spec.). 142 - 152. ISSN 1823- 5514; ESSN: 2550-164X

Ishak, Hazwani (2018) Conversion of oil palm trunk to sugars and organic acids by sub-critical water reaction. Masters thesis, Universiti Putra Malaysia.

Ishak, Mohd Nasri and Abu Talib, Abd Rahim and Harmin, Mohammad Yazdi (2018) Material selection and design analysis of multi-purpose disposable safety syringe. International Journal of Engineering & Technology, 7 (4 spec.13). 214 - 220. ISSN 2227-5258; ESSN: 2227-524X

Isma'ila, Mukhtar and Leman, Zulkiflle and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams (2018) Thermal and physicochemical properties of sugar palm fibre treated with borax. IOP Conference Series: Materials Science and Engineering, 368. art. no. 012038. pp. 1-8. ISSN 1757-8981; EISSN: 1757-899X

Ismail, Ahmad Safwan and Jawaid, Mohammad and Hameed Sultan, Mohamed Thariq and Zakaria, Azman (2018) Preliminary study on tensile and impact properties of kenaf / bamboo fiber reinforced epoxy composites. Journal of Renewable Materials, 6. 529 - 535. ISSN 2164-6325; ESSN: 2164-6341

Ismail, Alyani and Naeem, Nadeem and Parveen, Sajida (2018) Terahertz communications for 5G and beyond. In: Antenna Fundamentals for Legacy Mobile Applications and Beyond. Springer International Publishing, Switzerland, 305 - 322. ISBN 9783319639673

Ismail, Khairul Izwan (2018) Characterization of hybrid biocomposite synthesised with multi-walled carbon nanotube for finite strain application of aerospace structures. Masters thesis, Universiti Putra Malaysia.

Ismail, Khairul Izwan and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Mazlan, Norkhairunnisa and Ariffin, Ahmad Hamdan (2018) Tensile properties of hybrid biocomposite reinforced epoxy modified with carbon nanotube (CNT). BioResources, 13 (1). 1787 - 1800. ISSN ESSN: 1930-2126

Ismail, Mohd Idris Shah and Abdul Jalil, Nawal Aswan and As'arry, Azizan and Abdul Mutalib, Mohd Zurrayen (2018) Characterization of tool wear in friction drilling. Jurnal Tribologi, 17. 93 - 103.

Ismail, Mohd Idris Shah and Bahari, Mariyam Jameelah and Shuib, Norsyafiqah (2018) Thermal deformation of gas metal arc welding on aluminum alloy t-joints. Engineering Solid Mechanics, 6 (1). 21 - 26. ISSN 2291-8744; ESSN: 2291-8752

Ismail, Mohd Idris Shah and Buang, Ahmad Salleh (2018) Precision joining of steel-aluminum hybrid structure by clinching process. Journal of Advanced Manufacturing Technology, 12 (1). 25 - 36. ISSN 1985-3157

Ismail, Muhammad Faizzuddin (2018) Low velocity impact analysis of glass/kenaf hybrid composites for aerospace structural applications. Masters thesis, Universiti Putra Malaysia.

Ismail, Noor Faezah (2018) Paper-based disposable electrowetting chip for microfluidic application. Masters thesis, Universiti Putra Malaysia.

Ismail, Noor Faezah and Md Yunus, Nurul Amziah and Sulaiman, Nasri and Abdul Halin, Izhal and Mohtar, Mohd Nazim (2018) Microdroplet electrowetting on flexible paper-based microfluidic chip. Solid State Science and Technology, 26 (2). 106 - 121. ISSN 0128-7389

Izadi, Mahdi and Abd Rahman, Farah Asyikin and Ab Kadir, Mohd Zainal Abidin and Jasni, Jasronita and Abd. Rahman, Muhamad Safwan (2018) On the behaviour of polymer insulator with deposited moss on the surface against lightning in polluted air condition. In: 34th International Conference on Lightning Protection (ICLP 2018), 2-7 Sept. 2018, Rzeszow, Poland. .

Jaafar, Che Nor Aiza and Muhammad Rizal, Muhammad Asyraf and Zainol, Ismail (2018) Effect of kenaf alkalization treatment on morphological and mechanical properties of epoxy/silica/kenaf composite. International Journal of Engineering and Technology(UAE), 7 (4 spec. 35). art. no. 22743. 258 - 263. ISSN 2227-524X

Jaafar, Che Nor Aiza and Zainol, Ismail and Aremu, Omotoso Oladiran (2018) Effect of silica fillers on mechanical properties of epoxy/kenaf composites. Journal of Physics: Conference Series, 1082. pp. 1-6. ISSN 1742-6588; ESSN: 1742-6596

Jaafar, Haslina and Abdul Aziz, Nur Haziqah and Mohd Sidek, Roslina and Hamidon, Mohd Nizar and Shafie, Suhaidi (2018) Preparation and characterization of conductive carbon black / polydimethysiloxane (PDMS) composite. Solid State Science and Technology, 26 (2). 122 - 128. ISSN 0128-7389

JaberAbdulhamed, Ali and Adam, Nor Mariah and Ab Kadir, Mohd Zainal Abidin and Hairuddin, Abdul Aziz (2018) Review of solar parabolic-trough collector geometrical and thermal analyses, performance, and applications. Renewable and Sustainable Energy Reviews, 91. 822 - 831. ISSN 1364-0321; ESSN: 1879-0690

Jahun, Bala Gambo (2018) Development and field evaluation of blades with different lifting angles for mulching oil palm fronds prior to seedling planting. Doctoral thesis, Universiti Putra Malaysia.

Jahun, Bala Gambo and Ahmad, Desa and Mahadi @ Othman, Muhammad Razif and Sulaiman, Shamsuddin (2018) Effects of tractor mounted mulcher blades on tractor vibration while mulching oil palm fronds. In: National Conference on Agricultural and Food Mechanization 2018 (NCAFM 2018), 17-19 Apr. 2018, Pullman Kuching, Sarawak. (pp. 43-45).

Jalal, Ali Sadeq Abdulhadi and Ismail, Alyani (2018) A compact fractal-based asymmetrical dipole antenna for RFID tag applications. In: 2018 Third Scientific Conference of Electrical Engineering (SCEE), 19-20 Dec. 2018, University of Technology, Baghdad, Iraq. (pp. 101-104).

Jalasabri, Jafirdaus (2018) Mathematical modelling of fineness ratio effects on aerodynamic characteristics of an airship design using computational analysis. Masters thesis, Universiti Putra Malaysia.

Jamaluddin, Nurul Fauzani and Ahmad, Siti Anom and Mohd Noor, Samsul Bahari and Wan Hasan, Wan Zuha and Shair, Ezreen Farina (2018) Performance of different threshold estimation methods on SEMG wavelet de-noising in prolonged fatigue identification. In: 2018 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 3-6 Dec. 2018, Kuching, Sarawak, Malaysia. (pp. 293-296).

Jamaluddin, Nurul Fauzani and Ahmad, Siti Anom and Wan Hasan, Wan Zuha and Mohd Noor, Samsul Bahari (2018) Filtering corner frequency using Undecimated Wavelet Transform for surface EMG. Journal of Engineering Science and Technology, 13 (spec.). 61- 70. ISSN 1823-4690

Jamaludin, Farah Adilah and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Azis, Norhafiz and Jasni, Jasronita and Abd Rahman, Muhammad Syahmi and Osman, Miszaina (2018) Effect of RTV coating material on electric field distribution and voltage profiles on polymer insulator under lightning impulse. In: 34th International Conference on Lightning Protection (ICLP 2018), 2-7 Sept. 2018, Rzeszow, Poland. .

Jamaludin, Norhanisah and Abdul Rashid, Suraya and Tan, Tong Ling (2018) Extraction of carbon dots from empty fruit bunch biochar via an acid-free hydrothermal method. In: 2nd International Symposium on Advanced Materials and Nanotechnology (i-SAMN 2018), 15-16 Aug. 2018, The Everly Putrajaya, Malaysia. (pp. 24-25).

James Jayaselan, Helena Anusia and Wan Ismail, Wan Ishak and Mat Nawi, Nazmi and Mohamed Shariff, Abdul Rashid (2018) Determination of the optimal pre-processing technique for spectral data of oil palm leaves with respect to nutrient. Pertanika Journal of Science & Technology, 26 (3). pp. 1169-1182. ISSN 0128-7680; ESSN: 2231-8526

Janudin, Nurjahirah and Abdullah, Norli and Wan Yunus, Wan Md Zin and Md Yasin, Faizah and Yaacob, Mohd Hanif and Khairul Anuar, Norshafiqah and Mohd Kasim, Noor Azilah (2018) Effect of functionalized carbon nanotubes in the detection of benzene at room temperature. Journal of Nanotechnology, 2018. art. no. 2107898. pp. 1-7. ISSN 1687-9503; ESSN: 1687-9511

Jonathan Shi, Khai Ooi and Ahmad, Siti Anom and Ishak, Asnor Juraiza and Minhad, Khairun Nisa and Md Ali, Sawal Hamid and Yu, Zheng Chong (2018) Grove: an auxiliary device for sympathetic assessment via EDA measurement of neutral, stress, and anger emotions during simulated driving conditions. International Journal of Medical Engineering and Informatics, 10 (1). 16 - 29. ISSN 1755-0653; ESSN: 1755-0661

Jumaah, F. M. and Zaidan, A. A. and Zaidan, B. B. and Rahmatullah, Bahbibi and Qahtan, M. Y. and Sali, Aduwati (2018) Technique for order performance by similarity to ideal solution for solving complex situations in multi-criteria optimization of the tracking channels of GPS baseband telecommunication receivers. Telecommunication Systems, 68 (3). 425 - 443. ISSN 1018-4864; ESSN: 1572-9451

Jumaah, Huda Jamal (2018) UAV-based PM₂.₅ monitoring system for small scale urban areas. Masters thesis, Universiti Putra Malaysia.

Jumadi, Mohd Shahrul Azwan and Jamaludin, Diana (2018) Non-destructive assessment based on impedance properties to determine postharvest quality of rockmelon. In: National Conference on Agricultural and Food Mechanization 2018 (NCAFM 2018), 17-19 Apr. 2018, Pullman Kuching, Sarawak. (pp. 105-107).

Jumaidin, Ridhwan and Salit, Mohd Sapuan and Firdaus, Mohamed Saiful and Ab Ghani, Ahmad Fuad and Yaakob, Mohd Yuhazri and Zakaria, Nazri Huzaimi and Abdul Munir, Fudhail and Zakaria, Azrul Abidin and Jenal, Norhisyam (2018) Effect of agar on dynamic mechanical properties of thermoplastic sugar palm starch: thermal behavior. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 47 (1). 89 - 96. ISSN 2289-7879

Jumaidin, Ridhwan and Salit, Mohd Sapuan and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and Sahari, Japar (2018) Seaweeds as renewable sources for biopolymers and its composites: a review. Current Analytical Chemistry, 14 (3). 249 - 267. ISSN 1573-4110; ESSN: 1875-6727

Jusoh@Yusoff, Suhaimi Bahisham (2018) Efficient hardware design for palm-dorsa vein image enhancement. Doctoral thesis, Universiti Putra Malaysia.

K. M., Almadhagi and I., Abdul Halin and N., Sulaiman and N. A., Md Yunus (2018) The effect of latex particles at the edge of the microelectrode in lab on a chip system. eProceedings Chemistry, 3 (1). 64 - 70. ISSN 2550-1453

Kamal, Md Rowshon and Iqbal, Mohammed Cairul and Mojid, Md Abdul and Mohd Amin, Mohd Soom and Lai, Sai Hin (2018) Optimization of equitable irrigation water delivery for a large-scale rice irrigation scheme. International Journal of Agricultural and Biological Engineering, 11 (5). 160 - 166. ISSN 1934-6344; ESSN: 1934-6352

Kamal, Md. Rowshon and Che Man, Hasfalina and Wayayok, Aimrun and Mo'allim, Abdikani Abdullahi and Muhammed, Hadi Hamaaziz and Mohamed Zawawi, Mohamed Azwan and Mohd Soom, Mohd Amin (2018) Assessment of nutrient leaching in flooded paddy rice field experiment using Hydrus-1D. Water, 10. pp. 1-18. ISSN 2073-4441

Kamal, Md. Rowshon and Mohamed Zawawi, Mohamed Azwan and Che Man, Hasfalina and Wayayok, Aimrun and Mo'allim, Abdikani Abdullahi and Muhammed, Hadi Hamaaziz and Yahaya, Nasehir Khan (2018) An assessment of the vertical movement of water in a flooded paddy rice field experiment using Hydrus-1D. Water, 10 (1). art. no. 783. pp. 1-20. ISSN 2073-4441

Kamarbhari, Syakirah (2018) Development of an ergonomic child restraint system concept for infants in conventional aircraft seats. Doctoral thesis, Universiti Putra Malaysia.

Kamarul Zaman, Amanina Amani (2018) Effect of ultraviolet irradiation with dean vortex technology on quality of pineapple-mango juice blend. Masters thesis, Universiti Putra Malaysia.

Kamuri, Mohd Firdaus (2018) An integrated pulse field dielectrophoretic field-flow fractionation separation and optical detection on-chip for identification of microorganisms. Doctoral thesis, Universiti Putra Malaysia.

Kania, Dina and Yunus, Robiah and Omar, Rozita and Abdul Rashid, Suraya and Mohamed Jan, Badrul and Arsanjanid, Niloofar (2018) Nonionic polyol esters as thinner and lubricity enhancer for synthetic-based drilling fluids. Journal of Molecular Liquids, 266. 846 - 855. ISSN 0167-7322; ESSN: 1873-3166

Katim, Nurul Izzatul Akma and Ishak, Mohd Taufiq and Mohamad Amin, Nur Aqilah and Abdul Hamid, Mardhiah Hayati and Ahmad, Khairol Amali and Azis, Norhafiz (2018) Lightning breakdown voltage evaluation of palm oil and coconut oil as transformer oil under quasi-uniform field conditions. Energies, 11 (10). art. no. 2676. pp. 1-15. ISSN 1996-1073

Keul, Alexander G. and Brunner, Bernhard and Allen, John and Wilson, Katie A. and Taszarek, Mateusz and Price, Colin and Soleima, Gary and Sharma, Sanjay and Roy, Partha and Mat Said, Aini and Abu Bakar, Elistina and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima (2018) Multihazard weather risk perception and preparedness in eight countries. Weather, Climate, and Society. pp. 1-27. ISSN 1948-8327; ESSN: 1948-8335

Khalaf, Wisam Dhey Ab (2018) Carbonated alkali-activated olivine with glass fiber for soil stabilization. Doctoral thesis, Universiti Putra Malaysia.

Khaled, Alfadhl Yahya and Abd Aziz, Samsuzana and Rokhani, Fakhrul Zaman and Ibrahim, Nur Ul Atikah (2018) Interdigitated electrode for degradation assessment of palm olein during batch deep fat frying. Transactions of the ASABE, 61 (1). 15 - 24. ISSN 2151-0032

Khalid, Nurul Izzah and Sulaiman, S. and Ab. Aziz, Norashikin and Taip, Farah Saleena and Sobri, Hafreeza and Mahmud @ Ab Rashid, Nor Khaizura (2018) Electrolyzed water as a green cleaner: chemical and physical characterization at different electrolysing parameters. Food Research, 2 (6). 512 - 519. ISSN 2550-2166

Khan, Mohammad Asim and Jawaid, Mohammad and Abdan, Khalina and Mohamed Nasir (2018) Effect of alkali treatments on physical and mechanical strength of pineapple leaf fibres. IOP Conference Series: Materials Science and Engineering, 290 (1). pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Khan, Samia (2018) Secure AdHoc on demand distance vector routing protocol using media access control and symmetric encryption against black hole and DDoS attacks in manet. Masters thesis, Universiti Putra Malaysia.

Kharraz, Osayd M. and M. Supa'at, Abu Sahmah and Atieh, Ahmed and Abdul Kadir @ Jaafar, Muhammad Zamzuri and Mahdi, Mohd Adzir (2018) Enhanced gain saturation model of non-linear semiconductor optical amplifiers. IET Optoelectronics, 12 (6). 263 - 268. ISSN 1751-8776

Kharraz, Osayd M. and M. Supa'at, Abu Sahmah and Mahdi, Mohd Adzir (2018) Compensation of carrier lifetime in double-pass semiconductor optical amplifiers. Optics Communications, 420. 116 - 121. ISSN 0030-4018; ESSN: 1873-0310

Khezri, Ramin (2018) Experimental and numerical evaluation of napier grass gasification in an auto-thermal fluidized bed reactor. Doctoral thesis, Universiti Putra Malaysia.

Khmag, Asem and Ghoul, Sami and Al-Haddad, Syed Abdul Rahman and Kamarudin, Noraziahtulhidayu (2018) Noise level estimation for digital images using local statistics and its applications to noise removal. TELKOMNIKA (Telecommunication, Computing, Electronics and Control), 16 (2). 915 - 924. ISSN 1693-6930; ESSN: 2302-9293

Khmag, Asem and Ramli, Abd Rahman and Sy Mohamed, Sy Abd Rahman Al-haddad and Kamarudin, Noraziahtulhidayu (2018) Natural image noise level estimation based on local statistics for blind noise reduction. The Visual Computer, 34 (4). 575 - 587. ISSN 0178-2789; ESSN: 1432-2315

Khmag, Asem and Sy Mohamed, Sy Abd Rahman Al-haddad and Ramli, Abd Rahman and Kalantar, Bahareh (2018) Single image dehazing using second-generation wavelet transforms and the mean vector L2-norm. The Visual Computer volume, 34 (5). 675 - 688. ISSN 0178-2789; ESSN: 1432-2315

Khodapanah, Nasrin and Idris, Azni and Khodapanahc, Leila and Soltani, Salman Masoudi and Yunus, Robiah (2018) Enhanced coagulant extraction from Jatropha curcas in aqueous solutions and its application in turbidity removal. Desalination and Water Treatment, 129. 227 - 233. ISSN 1944-3994; ESSN: 1944-3986

Khosravinia, Kavian (2018) Integrated OBD-II and direct controller area network access for vehicle monitoring system. Masters thesis, Universiti Putra Malaysia.

Khosrokhani, Maryam and Bejo, Siti Khairunniza and Pradhan, Biswajeet (2018) Geospatial technologies for detection and monitoring of Ganoderma basal stem rot infection in oil palm plantations: a review on sensors and techniques. Geocarto International, 33 (3). pp. 260-276. ISSN 1010-6049; ESSN: 1752-0762

Khosropanah, Pegah (2018) EEG-and MRI-based epilepsy source localization using multivariate empirical mode decomposition and inverse solution method. Doctoral thesis, Universiti Putra Malaysia.

Khosropanah, Pegah and Ramli, Abdul Rahman and Lim, Kheng Seang and Marhaban, Mohammad Hamiruce and Ahmedov, Anvarjon (2018) Fused multivariate empirical mode decomposition (MEMD) and inverse solution method for EEG source localization. Biomedical Engineering-Biomedizinische Technik, 63 (4). 467 - 479. ISSN 0013-5585; ESSN: 1862-278X

Khurshid, Zmnako Mohammed (2018) Lightning-induced transient effects in hybrid PV–wind system and its mitigation. Masters thesis, Universiti Putra Malaysia.

Kulandaivalu, Tharani and Abdul Rashid, Suraya and Sabli, Nordin and Tan, Tong Ling (2018) Fabrication of visible-light responsive CQDs/Cu2O nanocomposite for CO2 photoreduction. In: 2nd International Symposium on Advanced Materials and Nanotechnology (i-SAMN 2018), 15-16 Aug. 2018, The Everly Putrajaya, Malaysia. (pp. 92-93).

Kunnan Singh, Jasbir Singh and Ching, Yern Chee and Abdullah, Luqman Chuah and Ching, Kuan Yong and Razali, Shaifulazuar and Seng, Neon Gan (2018) Optimization of mechanical properties for polyoxymethylene/glass fiber/polytetrafluoroethylene composites using response surface methodology. Polymers, 10 (3). pp. 1-25. ISSN 2073-4360

Lahijani, Seyed Ahmad Mahmoudi and Supeni, Eris Elianddy (2018) Evaluating the effect of economizer on efficiency of the fire tube steam boiler. Innovative Energy & Research, 7 (1). pp. 1-4. ISSN 2576-1463

Lai, Wai Luen (2018) Comparative study on the performance of bentonite, kenaf and zeolite to reduce earth resistance of grounding systems. Masters thesis, Universiti Putra Malaysia.

Lakshminarayana, G. and Baki, S.O. and Sayyed, M.I. and Dong, M.G. and Lira, A. and Noor, A.S.M. and Kityk, I.V. and Mahdi, M.A. (2018) Vibrational, thermal features, and photon attenuation coefficients evaluation for TeO2-B2O3-BaO-ZnO-Na2O-Er2O3-Pr6O11 glasses as gamma-rays shielding materials. Journal of Non-Crystalline Solids, 481. pp. 568-578. ISSN 0022-3093; EISSN: 1873-4812

Lakshminarayana, Gandham and Omar Baki, Sharudin and Lira, Alicia and Caldiño, U. and Meza-Rocha, A. N. and Kityk, Iwan V. and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2018) Eﬀect of alkali/mixed alkali metal ions on the thermal and spectralcharacteristics of Dy3+:B2O3-PbO-Al2O3-ZnO glasses. Journal of Non-Crystalline Solids, 481. 191 - 201. ISSN 0022-3093; ESSN: 1873-4812

Lau, K. Y. and Zainol Abidin, N. H. and Abu Bakar, M. H. and Latif, A. A. and Muhammad, F. D. and Huang, N. M. and Omar, M. F. and Mahdi, M. A. (2018) Passively mode-locked ultrashort pulsed fiber laser incorporating multi-layered graphene nanoplatelet saturable absorber. Journal of Physics Communications, 2 (7). pp. 1-13. ISSN 2399-6528

Lau, K.Y. and Ng, E.K. and Abu Bakar, M.H. and Abas, A.F. and Alresheedi, M.T. and Yusoff, Z. and Mahdi, M.A. (2018) Low threshold linear cavity mode-locked fiber laser using microfiber-based carbon nanotube saturable absorber. Optics and Laser Technology, 102. 240 - 246. ISSN 0030-3992, ESSN: 1879-2545

Lau, Kia Kian and Jawaid, Mohammad and Ariffin, Hidayah and Karim, Zoheb (2018) Isolation and characterization of nanocrystalline cellulose from roselle-derived microcrystalline cellulose. International Journal of Biological Macromolecules, 114. 54 - 63. ISSN 0141-8130, ESSN: 1879-0003

Lau, Kuen Yao and Abu Bakar, Muhammad Hafiz and Md Zain, Ahmad Rifqi and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2018) Stable multi-wavelength erbium-doped fiber laser assisted by graphene-PMMA thin film. Optics and Laser Technology, 105. 129 - 134. ISSN 0030-3992; ESSN: 1879-2545

Lau, Kuen Yao and Abu Bakar, Muhammad Hafiz and Muhammad, Farah Diana and Abd Latif, Amirah and Omar, Muhammad Firdaus and Yusoff, Zulfadzli and Mahdi, Mohd Adzir (2018) Dual-wavelength, mode-locked erbium-doped fiber laser employing graphene/polymethyl-methacrylate saturable absorber. Optics Express, 26 (10). 12790 - 12800. ISSN 1094-4087

Lau, Kuen Yao and Ng, E. K. and Abu Bakar, Muhammad Hafiz and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Yusoff, Zulfadzli and Mahdi, Mohd Adzir (2018) High energy L-band femtosecond fiber laser with carbon nanotube saturable absorber. In: 2018 IEEE 7th International Conference on Photonics (ICP), 9-11 Apr. 2018, Langkawi, Kedah, Malaysia. .

Lau, Kuen Yao and Ng, E.K. and Abu Bakar, Muhammad Hafiz and Abas, A.F. and Alresheedi, Mohammed and Yusoff, Zulfadzli and Mahdi, Mohd Adzir (2018) Low threshold L-band mode-locked ultrafast fiber laser assisted by microfiber-based single wall carbon nanotube saturable absorber. Optics Communications, 413. 249 - 254. ISSN 0030-4018

Lee, Ching Hao and Salit, Mohd Sapuan and Hassan, Mohd Roshdi (2018) Thermal analysis of kenaf fiber reinforced floreon biocomposites with magnesium hydroxide flame retardant filler. Polymer Composites, 39 (3). 869 - 875. ISSN 0272-8397; EISSN: 1548-0569

Lee, Jesse Kar Ming and Taip, Farah Saleena and Abdullah, Zalizawati (2018) Effectiveness of additives in spray drying performance: a review. Food Research, 2 (6). 486 - 499. ISSN 2550-2166

Lee, Sin Yee and Abdullah, Luqman Chuah and Abdul Rahman, Russly and Abas, Faridah and Tan, Wei Kiat and Chong, Gun Hean (2018) Solution enhanced dispersion by supercritical fluids (SEDS): an approach in particle engineering to modify aqueous solubility of andrographolide from Andrographis paniculata extract. Chemical Engineering Research and Design, 138. 176 - 189. ISSN 0263-8762; ESSN: 1744-3563

Lim, Chong Lye and Adam, Nor Mariah and Ahmad, Kamarul Arifin (2018) Cryogenic pipe flow simulation for liquid nitrogen with vacuum insulated pipe (VIP) and Polyurethane (PU) foam insulation under steady-state conditions. Thermal Science and Engineering Progress, 7. 302 - 310. ISSN 2451-9049

Lim, Jin Wei and Ong, Teng Haan and Thomas Choong, Shean Yaw and Abdullah, Luqman Chuah and Abdul Razak, Mus’ab and Cionita, Tezara and Toudehdehghan, Abdolreza (2018) Heavy metal recovery from electric arc furnace steel slag by using hydrochloric acid leaching. E3S Web of Conferences, 34. pp. 1-8. ISSN 2267-1242

Lin, Mee Gie and Olaniyi, Lasekan Olusegun and Saari, Nazamid and Bejo, Siti Khairunniza (2018) Effect of chitosan and carrageenan-based edible coatings on post-harvested longan (Dimocarpus longan) fruits. CyTA-Journal of Food, 16 (1). 490 - 497. ISSN 1947-6337; ESSN: 1947-6345

Ling, Ellyna Chok Yee (2018) Experimental modal analysis of composite plates with low velocity impact damage. Masters thesis, Universiti Putra Malaysia.

Low, Suk Khe and Tan, Mei Ching and Chin, Nyuk Ling (2018) Effect of ultrasound pre-treatment on adsorbent in dye adsorption compared with ultrasound simultaneous adsorption. Ultrasonics Sonochemistry, 48. 64 - 70. ISSN 1350-4177; ESSN: 1873-2828

M Alkateb, Mohamed Mohamed (2018) Crushing behaviour of kenaf fibre-reinforced epoxy composite elliptical tubes. Doctoral thesis, Universiti Putra Malaysia.

M. Aboghrara, Alsanossi and Alghoul, Mohammad and Baharudin, B. T. HangTuah and Elbreki, Abdelnaser and A. Ammar, Alhadi and Sopian, Kamaruzzaman and Hairuddin, Abdul Aziz (2018) Parametric study on the thermal performance and optimal design elements of solar air heater enhanced with jet impingement on a corrugated absorber plate. International Journal of Photoenergy, 2. pp. 1-21. ISSN 1110-662X; ESSN: 1687-529X

M. Almassri, Ahmed M. and Wan Hasan, Wan Zuha and Ahmad, Siti Anom and Shafie, Suhaidi and Wada, Chikamune and Horio, Keiichi (2018) Self-calibration algorithm for a pressure sensor with a real-time approach based on an artificial neural network. Sensors, 18. pp. 1-16. ISSN 1424-8220; ESSN: 1424-8220

M. N., Afnan Uda and Gopinath, Subash C. B. and Che Man, Hasfalina and S., Faridah and S. N., Bunawan and W. Nur Sabrina and N. A., Parmin and Hashim, Uda and M., Mazidah (2018) Production and purification of antibody by immunizing rabbit with rice tungro bacilliform and rice tungro spherical viruses. Process Biochemistry, 68. 37 - 42. ISSN 1359-5113; ESSN: 1873-3298

Mad Saad, Maya Emira and K. M. S., Umi and Abdul Rahman, Nor'aini and Samsu Baharuddin, Azhari (2018) Survivability of P. oxalicum T3.3 bioformulation on carrier materials and storage temperature. International Journal of Environmental & Agriculture Research, 4 (10). 49 - 53. ISSN 2454-1850

Madzaki, Hazimah (2018) Simultaneous removal of carbon dioxide, sulphur dioxide and nitrogen oxides using activated carbon modified with metal oxides. Masters thesis, Universiti Putra Malaysia.

Mageed, Alyaa Khadhier and Awang Biak, Dayang Radiah and Ali, Salmiaton and Siajam, Shamsul Izhar and Abdul Razak, Mus'ab (2018) Study the thermal stability of nitrogen doped reduced graphite oxide supported copper catalyst. Journal of Cluster Science, 29. 709 - 718. ISSN 1040-7278; ESSN: 1572-8862

Mahat, Siti Baizura and Omar, Rozita and Idris, Azni and Mustapa Kamal, Siti Mazlina and Mohamad Idris, Aida Isma (2018) Dynamic membrane applications in anaerobic and aerobic digestion for industrial wastewater: a mini review. Food and Bioproducts Processing, 112. 150 - 168. ISSN 0960-3085

Mahdi, Mohd Adzir and Kharraz, Osayd M. and Supa'at, Abu Sahmah M. and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer (2018) Acceleration of carrier lifetime in gain-clamped semiconductor optical amplifiers. IEEE Photonics Journal, 10 (5). art. no. 7104613. pp. 1-13. ISSN 1943-0647; ESSN: 1943-0655

Mahdi, Mohd Adzir and Sulaiman, Abdul Hadi and Abdul Kadir, Muhammad Zamzuri and Md Yusoff, Nelidya and Cholan, Noran Azizan and Abdullah, Fairuz and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer (2018) Broad bandwidth SOA-based multiwavelength laser incorporating a bidirectional Lyot filter. Chinese Optics Letters, 16 (9). art. no. 090603. pp. 1-4. ISSN 1671-7694

Mahdizadeh, Hadi (2018) Flow analysis of water with aluminum oxide nanoparticles in a 90° bend pipe with injection using computational fluid dynamics. Masters thesis, Universiti Putra Malaysia.

Mahmmod, Basheera M. (2018) A speech enhancement framework using discrete Krawtchouk-Tchebichef Transform. Doctoral thesis, Universiti Putra Malaysia.

Mahmood, Hussein Adel (2018) Design of homogenous CNG-H and air mixer for diesel engines using particle swarm optimisation. Doctoral thesis, Universiti Putra Malaysia.

Mahmood, Hussein Adel and Adam, Nor Mariah and Sahari, Barkawi and Masuri, Siti Ujila (2018) Development of a particle swarm optimisation model for estimating the homogeneity of a mixture inside a newly designed CNG-H2-AIR mixer for a dual fuel engine: an experimental and theoretic study. Fuel, 217. pp. 131-150. ISSN 0016-2361; ESSN: 1873-7153

Main, Nor Mazlana (2018) Development and evaluation of linerboard made from soda-anthraquinone treated coconut coir fiber for protective packaging. Doctoral thesis, Universiti Putra Malaysia.

Majid, Dayang Laila and Mohd Jamal, Qistina and Manan, Nor Hafizah (2018) Low-velocity impact performance of glass fiber, kenaf fiber, and hybrid glass/kenaf fiber reinforced epoxy composite laminates. BioResources, 13 (4). 8839 - 8852. ISSN 1930-2126

Malek, Azizi and Sedan, Mohd Fazri and Mohd Harithuddin, Ahmad Salahuddin (2018) Development of attitude control system for hybrid airship vehicle. International Journal of Engineering and Technology(UAE), 7 (4 spec.13). art. no. 21339. 99 - 106. ISSN 2227-524X

Mamat, Nor Hana and Mohd Noor, Samsul Bahari and Che Soh, Azura and Ab Rashid, Ahmad Hazri and Jufika Ahmad, Nur Liyana and Mohd Yusuff, Ishak (2018) Optimization of neural network architecture using particle swarm algorithm for dissolved oxygen modelling in a 200L bioreactor PHA production. In: 2018 IEEE 16th Student Conference on Research and Development (SCOReD), 26-28 Nov. 2018, Selangor, Malaysia. .

Mamat, Nor Hana and Mohd Noor, Samsul Bahari and Che Soh, Azura and Taip, Farah Saleena and Ab Rashid, Ahmad Hazri and Jufika Ahmad, Nur Liyana and Mohd Yusuff, Ishak (2018) Particle swarm optimization method in initialization of wavelet neural network model for fed-batch bioprocesses. In: 2018 8th IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2018), 23-25 Nov. 2018, Penang, Malaysia. (pp. 190-194).

Mamdoohi, Ghazaleh and Sarmani, Abdul Rahman and Abu Bakar, Muhammad Hafiz and Mahdi, Mohd Adzir (2018) Switchable multiwavelength Brillouin-Raman fiber laser utilizing an enhanced nonlinear amplifying fiber loop design. IEEE Photonics Journal, 10 (2). pp. 1-11. ISSN 1943-0655

Manab, Nurul Hanani and Baharudin, Elfarizanis and Che Seman, Fauziahanim and Ismail, Alyani (2018) 2.45 GHz patch antenna based on thermoplastic polymer substrates. In: 2018 IEEE International RF and Microwave Conference (RFM 2018), 17-19 Dec. 2018, Penang, Malaysia. (pp. 93-96).

Manoharan, Thulasi and Mohd Yusuff, Rosnah and Zulkifli, Norzima and Perimal, Enoch Kumar (2018) Effect of break time on the upper extremity musculoskeletal disorder development among intensive computer users in Malaysia. Life Sciences, Medicine and Biomedicine, 2 (1). 1-Jul. ISSN 2600-7207

Mansor, Ya'akob (2018) Constructing and calibrating unmanned aerial vehicle hexacopter with lightweight visible, near-infrared and thermal sensor for remote sensing (Not for loan). Doctoral thesis, Universiti Putra Malaysia.

Marzuki, Omar Faruqi and Mohd Rafie, Azmin Shakrine and Romli, Fairuz Izzuddin and Ahmad, Kamarul Arifin (2018) Magnus wind turbine: the effect of sandpaper surface roughness on cylinder blades. Acta Mechanica Sinica, 229 (1). 71 - 85. ISSN 0567-7718; ESSN: 1614-3116

Marzuki, Omar Faruqi and Mohd Rafie, Azmin Shakrine and Romli, Fairuz Izzudin and Ahmad, Kamarul Arifin and Abdul Hamid, Mohd Faisal (2018) An overview of horizontal-axis Magnus wind turbines. IOP Conference Series: Materials Science and Engineering, 405. art. no. 012011. 1-Aug. ISSN 1757-8981; ESSN: 1757-899X

Masenwat, Noor Azreen and Muhammad Rashid, Raizal Saifulnaz and M., Haniza and Voo, Yen Lei and Amran, Mugahed Yahya Hussein (2018) Radiation shielding of ultra-high-performance concrete with silica sand, amang and lead glass. Construction and Building Materials, 172. 370 - 377. ISSN 0950-0618; ESSN: 1879-0526

Masoumidezfouli, Seyedhossein (2018) A new framework for multi-partition finite state machine low power design based on genetic algorithm. Masters thesis, Universiti Putra Malaysia.

Mat Daud, Siti Zubaidah (2018) Damage severity evaluation methods for biocomposite vertical axis wind turbine blades due to lightning strikes. Doctoral thesis, Universiti Putra Malaysia.

Mat Daud, Siti Zubaidah and Mustapha, Faizal and Adzis, Zuraimy (2018) Lightning strike evaluation on composite and biocomposite verticalaxis wind turbine blade using structural health monitoring approach. Journal of Intelligent Material Systems and Structures, 29 (17). 3455 - 3465. ISSN 1045-389X, ESSN: 1530-8138

Mat Fuad, Nurafifah and Abdullah, Luqman Chuah and Mgt Ahmad, Puteri Farah Wahida (2018) Drying of Plectranthus amboinicus (lour) spreng leaves by using oven dryer. Engineering in Agriculture, Environment and Food, 11 (4). 239 - 244. ISSN 1881-8366

Mat Fuad, Nurafifah and Omar, Rozita and Kamarudin, Suryani and Harun, Mohd Razif and Idris, Azni and Wan Ab. Karim Ghani, Wan Azlina (2018) Effective use of tannin based natural biopolymer, AFlok-BP1 to harvest marine microalgae Nannochloropsis. Journal of Environmental Chemical Engineering, 6 (4). 4318 - 4238. ISSN 2213-3437; ESSN: 2213-2929

Mat Lazim, Nurul Hanira (2018) Optimization of ammonia-nitrogen removal by an integrated system of lime precipitation and ammonia stripping for scheduled waste landfill leachate. Doctoral thesis, Universiti Putra Malaysia.

Mat Nasir, Nurul Ain Atirah and Mohtar, Mohd Nazim and Md Yunus, Nurul Amziah (2018) Development of signal generator for lab on a chip application. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Mat Nong, Mohd Ali and Md Yusof, Juraina and Sabil, Suzila and Mohd Sidek, Roslina (2018) Motorcycle image analysis with nanoelectronics platform. In: 2nd International Symposium on Advanced Materials and Nanotechnology (i-SAMN 2018), 15-16 Aug. 2018, The Everly Putrajaya, Malaysia. (pp. 32-33).

Mat Nong, Mohd Ali and Mohd Sidek, Roslina and Osman, Rosiah and Sabil, Suzila and Md Yusof, Juraina (2018) Real time motorcycle image detection and analysis. Journal of Solid State Science and Technology, 26 (2). 24 - 32. ISSN 2162-8777; ESSN: 2162-8769

Mat Rusni, Izyani and Ismail, Alyani and Hamidon, Mohd Nizar (2018) Sensitivity enhancement of chemical sensor using aligned-gap split ring resonator. Journal of Fundamental and Applied Sciences, 10 (6S). 471 - 481. ISSN 1112-9867; EISSN: 2588-1914

Mavakumba, Kefas Haruna (2018) Biodiesel synthesis from PFAD using heterogeneous sulfonated-glucose catalysts. Doctoral thesis, Universiti Putra Malaysia.

Mavakumba Kefas, Haruna and Yunus, Robiah and Rashid, Umer and Yap, Taufiq Yun Hin (2018) Modified sulfonation method for converting carbonized glucose into solid acid catalyst for the esterification of palm fatty acid distillate. Fuel, 229. 68 - 78. ISSN 0016-2361; ESSN: 1873-7153

Mazaheri, Amin (2018) Embedded mini-analyzer device for in situ wide range heavy metal identification and concentration detection. Doctoral thesis, Universiti Putra Malaysia.

Mazlan, Nurul Ain (2018) Evaluation of performance and fouling resistance of sandwich ultrafiltration for treatment of final discharged palm oil mill effluent(no full stop in abstract). Masters thesis, Universiti Putra Malaysia.

Mazlan, Nurul Ain and Md. Yunos, Khairul Faezah and Mohd Naim, Mohd Nazli and Samsu Baharuddin, Azhari (2018) Performances of sandwich membrane in reclamation of water from final discharged POME. Journal of Advanced Research in Materials Science, 47 (1). pp. 1-8. ISSN 2289-7992

Md Ali, Syaril Azrad and Hassim, Mohamad Iswady (2018) Conceptual exploration for airborne wind energy system for electricity generation in Pulau Perhentian Kecil, Malaysia – MBSE approach. International Journal of Engineering and Technology(UAE), 7 (4 spec.13). 205 -213. ISSN 2227-524X

Md Rezali, Khairil Anas and Griffin, Michael J. (2018) Transmission of vibration through glove materials: effects of contact force. Ergonomics, 61 (9). 1246 - 1258. ISSN 0014-0139; ESSN: 1366-5847

Md Tohit, Khairul Nizam (2018) Development of hybrid problem solving method for subsea industry. Doctoral thesis, Universiti Putra Malaysia.

Md Yasin, Faizah and Mohd Kasim, Noor Azilah and Abdullah, Luqman Chuah and Janudin, Nurjahirah and Abdullah, Norli and Mohamad Saidi, Norshafiqah (2018) Characterization of amide and ester functionalized multiwalled carbon nanotubes. Asian Journal of Chemistry, 30 (7). 1613 - 1616. ISSN 0970-7077

Md Yunus, Nurul Amziah and Ismail, Noor Faezah and Abdul Halin, Izhal and Sulaiman, Nasri and Mohtar, Mohd Nazim (2018) Microdroplet electrowetting actuation on flexible paper-based lab on a chip. Results in Physics, 11. 847 - 852. ISSN 2211-3797

Md Yunus, Nurul Amziah and Zainudin, Muhammad Arif and Sulaiman, Nasri and Abbas, Zaid Ali (2018) Microfluidic fluid flow design with Arduino relay and temperature controller for processor. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Md. Shah, Ain Umara (2018) Low velocity impact sandwich structure bamboo for aerospace applications. Doctoral thesis, Universiti Putra Malaysia.

Md. Yusoff, Nelidya and Sulaiman, Abdul Hadi and Ambran, Sumiaty and Hamzah, Azura and Mahdi, Mohd Adzir (2018) Performance improvement for hybrid L-band remote erbium doped fiber amplifier/raman using phase modulator. International Journal of Electrical and Computer Engineering, 8 (3). 1875- 1881. ISSN 2088-8708; ESSN: 2722-2578

Meei, Chien Quek and Nyuk, Ling Chin and Sheau, Wei Tan and Yusof, Yus Aniza and Chung, Lim Law (2018) Molecular identification of species and production origins of edible bird's nest using FINS and SYBR green I based real-time PCR. Food Control, 84. pp. 118-127. ISSN 0956-7135

Meei, Chien Quek and Nyuk, Ling Chin and Yusof, Yus Aniza and Chung, Lim Law and Sheau, Wei Tan (2018) Pattern recognition analysis on nutritional profile and chemical composition of edible birds nest for its origin and authentication. International Journal of Food Properties, 21 (1). 1680 - 1696. ISSN 1094-2912; ESSN: 1532-2386

Meri, Nor Hidayah and Alias, Azil Bahari and Talib, Norhayati and Rashid, Zunaira and Wan Ab. Karim Ghani, Wan Azlina (2018) Comparison of H2S adsorption by two hydrogel composite (HBC) derived by Empty Fruit Bunch (EFB) biochar and Coal Fly Ash (CFA). IOP Conference Series: Materials Science and Engineering, 334 (1). pp. 1-9. ISSN 1757-8981; ESSN: 1757-899X

Mezaal, Mustafa Ridha (2018) Optimized techniques for landslide detection and characteristics using LiDAR data. Doctoral thesis, Universiti Putra Malaysia.

Minakata, Kaiko and Tashiro, Kunihisa and Wakiwaka, Hiroyuki and Kobayashi, Kazuki and Misron, Norhisam and Aliteh, Nor Aziana and Nagata, Hirokazu (2018) Proposal of fruit battery method for estimating oil palm ripeness. In: 12th International Conference on Sensing Technology (ICST 2018), 4-6 Dec. 2018, Limerick, Ireland. (pp. 399-402).

Mo'allim, Abdikani Abdullahi (2018) Modeling solute transport for improved fertiliser use in rice production system. Doctoral thesis, Universiti Putra Malaysia.

Moey, Lip Kean and Adam, Nor Mariah and Ahmad, Kamarul Arifin and Abdullah, Luqman Chuah (2018) Wind tunnel study of different roof geometry configurations for wind induced natural ventilation into stairwell in tropical climate. international journal of applied engineering research, 13 (5). 2635 - 2647. ISSN 0973-4562

Moghaddam, Seyed Amirebrahim Emami and Harun, Razif and Mokhtar, Mohd Noriznan and Zakaria, Rabitah (2018) Potential of zeolite and algae in biomass immobilization. Biomed Research International, 2018. art. no. 6563196. pp. 1-15. ISSN 2314-6133; ESSN: 2314-6141

Mohafez, Hamidreza and Ahmad, Siti Anom and Hadizadeh, Maryam and Moghimi, S. and Syed Waseem Ahmad, Sharifah Roohi and Marhaban, Mohammad Hamiruce and Saripan, M. Iqbal and Lekhraj Rampal, Sanjiv Rampal (2018) Quantitative assessment of wound healing using high-frequency ultrasound image analysis. Skin Research and Technology, 24 (1). 45 - 53. ISSN 0909-752X; ESSN: 1600-0846

Mohamad, Ahmad Syukri and Rahmat, Mohd Khairil and Mohd Radzi, Mohd Amran and Mailah, Nashiren Farzilah and Othman, Mohammad Lutfi (2018) A single battery bank, three-phase cascaded multilevel inverter with the least number of conducting switches. In: 2018 IEEE 7th International Conference on Power and Energy (PECon), 3-4 Dec. 2018, Berjaya Times Square Hotel, Kuala Lumpur, Malaysia. (pp. 73-78).

Mohamad, Mas Haslinda and Sali, Aduwati and Hashim, Fazirulhisyam and Nordin, Rosdiadee and Takyu, Osamu (2018) Clustering transmission opportunity length (CTOL) model over cognitive radio network. Sensors, 18 (12). art. no. 4351. pp. 1-15. ISSN 1424-8220

Mohamad, Nur Aqilah and Azis, Norhafiz and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Yunus, Robiah and Yaakub, Zaini (2018) Ageing study of palm oil and coconut oil in the presence of insulation paper for transformers application. Materials, 11 (4). pp. 1-20. ISSN 1996-1944

Mohamad, Nur Aqilah and Azis, Norhafiz and Jasni, Jasronita and Yunus, Robiah and Ab Kadir, Mohd Zainal Abidin and Yaakub, Zaini (2018) Effects of different types of surfactants on AC breakdown voltage of refined, bleached and deodorized palm oil based CuO nanofluids. In: 10th IEEE PES Asia-Pacific Power and Energy Engineering Conference 2018 (APPEEC), 7-10 Oct. 2018, Kota Kinabalu, Sabah, Malaysia. (pp. 768-771).

Mohamad, Nurul Lina (2018) Modeling of xylitol production based on xylose fermentation by Candida tropicalis. Doctoral thesis, Universiti Putra Malaysia.

Mohamad Amin, Nur Aqilah and Azis, Norhafiz and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Yunus, Robiah and Yaakub, Zaini (2018) Physiochemical and electrical properties of refined, bleached and deodorized palm oil under high temperature ageing for application in transformers. Energies, 11 (6). art. no. 1583. pp. 1-13. ISSN 1996-1073

Mohamad Khaidir, Norfaizah (2018) Determination of critical gap for motorcycle at merging points of exclusive motorcycle lane in Malaysia. Masters thesis, Universiti Putra Malaysia.

Mohamad Nor, Mohd Hafiz (2018) Multiservice radio over fiber system using optical carrier suppression and polarization multiplexing method. Masters thesis, Universiti Putra Malaysia.

Mohamad Rashidi, Fairuz Rizal and Wan Hasan, Wan Zuha and Hamidon, Mohd Nizar and Shafie, Suhaidi (2018) Comparison of various varying mechanism version for modified nodal array approach in foot plantar pressure measurement system. In: 2nd International Conference on Smart Sensors and Application (ICSSA 2018), 24-26 July 2018, Hilton Hotel, Kuching, Sarawak, Malaysia. (pp. 58-63).

Mohamed, Salah Eldeen Gasim and Jasni, Jasronita and Mohd Radzi, Mohd Amran and Hizam, Hashim (2018) Implementation of the power transistor assisted Sen transformer in steady-state load flow analysis. IET Generation, Transmission and Distribution, 12 (18). 4182 - 4193. ISSN 1751-8687; ESSN: 1751-8695

Mohamed Amin Tawakkal, Intan Syafinaz and J. Cran, Marlene and W. Bigger, Stephen (2018) The influence of chemically treated natural fibers in poly (lactic acid) composites containing thymol. Polymer Composites, 39 (4). 1261 - 1272. ISSN 1548-0569

Mohamed Ariff, Azmah Hanim and Baharudin, B. T. Hang Tuah and Brabazon, Dermot and Hashmi, Saleem (2018) Biodegradable metal heart stent: characteristics, material options and preliminary testing method. In: Reference Module in Materials Science and Materials Engineering. Elsevier, United Kingdom, pp. 1-17. ISBN 9780128035818

Mohamed Ariff, Azmah Hanim and Zahari, Nur Ismarrubie and Sobri, Shafreeza and Mazlan, Norkhairunnisa and Dele-Afolabi, Temitope Theophilus and Calin, Recep (2018) Agro-waste shaped porous Al2O3/Ni composites: corrosion resistance performance and artificial neural network modelling. Materials Characterization, 142. 77 - 85. ISSN 1044-5803

Mohamed Rehan, Balqis (2018) An innovative micro-scale approach for vulnerability and flood risk assessment with the application to property-level protection adoptions. Natural Hazards, 91. pp. 1039-1057. ISSN 1573-0840; ESSN: 0921-030X

Mohamed Yusoff, Mohd Zuhri and Nasrudin, Muhammad Asyraf and Salit, Mohd Sapuan and Hassan, Mohamad Zaki (2018) Effect of cell size on the compressive properties of interlocking flax composite structures. In: 5th Mechanical Engineering Research Day (MERD'18), 3 May 2018, Kampus Teknologi UTeM, Melaka. (pp. 254-255).

Mohamed Yusoff, Mohd Zuhri and Rao, Sanjeev and Cantwell, Wesley James (2018) The mechanical properties of corrugated core structures based on flax fibre composites. Current Analytical Chemistry, 14 (3). 285 - 291. ISSN 1573-4110; ESSN: 1875-6727

Mohamed Yusoff, Zainatul Yushaniza (2018) Energy efficient coordinated multipoint using branch-and-bound and hybrid techniques in LTE-advanced. Masters thesis, Universiti Putra Malaysia.

Mohammad, Saleem Ethaib and Omar, Rozita and Mustapa Kamal, Siti Mazlina and Awang Biak, Dayang Radiah and S., Syafiie (2018) Development of a hybrid PSO-ANN model for estimating glucose and xylose yields for microwave-assisted pretreatment and the enzymatic hydrolysis of lignocellulosic biomass. Neural Computing and Applications, 30 (4). 1111 - 1121. ISSN 0941-0643; ESSN: 1433-3058

Mohammady, Somayeh and Dooley, John and Farrell, Ronan and Sulaiman, Nasri (2018) Depiction of peak to average power ratio reduction scheme and potentials for 5G. In: 2018 IEEE International RF and Microwave Conference (RFM 2018), 17-19 Dec. 2018, Penang, Malaysia. (pp. 286-290).

Mohammed, Abdulsalam and Che Man, Hasfalina and Idris, Aida Isma and Zainal Abidin, Zurina and Md Yunos, Khairul Faezah (2018) The pertinence of microwave irradiated coconut shell bio-sorbent for wastewater decolourization: structural morphology and adsorption optimization using the response surface method (RSM). International Journal of Environmental Research and Public Health, 15 (10). art. no. 2200. pp. 1-19. ISSN 1661-7827; EISSN: 1660-4601

Mohammed, Hassan and Sobri, Shafreeza (2018) Corrosion inhibition studies of cashew nut (Anacardium occidentale) on carbon steel in 1.0 M hydrochloric acid environment. Materials Letters, 229. 82 - 84. ISSN 0167-577X; ESSN: 1873-4979

Mohammed, Husam Abduldaem (2018) Optical code division multiple access-based ammonia gas sensor network using modified single mode fiber coated with polyaniline/graphite nanofiber. Doctoral thesis, Universiti Putra Malaysia.

Mohammed, Husam Abduldaem and Abdul Rahman, Norizah and Ahmad, Muhammad Zamharir and Abu Bakar, Muhammad Hafiz and Ahmad Anas, Siti Barirah and Mahdi, Mohd Adzir and Yaacob, Mohd Hanif (2018) Sensing performance of modified single mode optical fiber coated with nanomaterials based ammonia sensors operated in the C-band. IEEE Access, 7 (1). pp. 5467-5476. ISSN 2169-3536

Mohammed, Ibrahim (2018) Analysis of fibre metal laminate based on carbon fibre hybrid composites for aero-engine applications. Doctoral thesis, Universiti Putra Malaysia.

Mohammed, Ibrahim and Abu Talib, Abd Rahim and Hameed Sultan, Mohamed Thariq and Saadon, Syamimi (2018) Fire behavioural and mechanical properties of carbon fibre reinforced aluminium laminate composites for aero-engine. International Journal of Engineering and Technology, 7 (4 spec.13). art. no. 21323. 22 - 27. ISSN 2227-524X

Mohammed, Ibrahim and Abu Talib, Abd Rahim and Hameed Sultan, Mohamed Thariq and Saadon, Syamimi (2018) Thermal properties of HL002-TA/B epoxy resin/hardener in fibre metal laminates composites for aero-engine. International Journal of Pure and Applied Mathematics, 119 (15). 3761 - 3769. ISSN 1311-8080

Mohammed, Ibrahim and Abu Talib, Abd Rahim and Hameed Sultan, Mohammed Thariq and Jawaid, Mohammad and Ariffin, Ahmad Hamdan and Saadon, Syamimi (2018) Mechanical properties of fibre-metal laminates made of natural/synthetic fibre composites. BioResources, 13 (1). 2022 - 2034. ISSN 1930-2126

Mohammed, Kachalla and Abd Karim, Izian and Abd. Aziz, Farah Nora Aznieta and Law, Teik Hua (2018) Profiled composite slab strength determination method. Journal of Soft Computing in Civil Engineering, 2 (2). 31 - 55. ISSN ESSN: 2588-2872

Mohammed, Kachalla and Kareem, Shatha Sahib (2018) Deficient reinforced concrete beam-column joint strengthening. Pertanika Journal of Scholarly Research Reviews, 4 (3). pp. 11-25. ISSN 2462-2028

Mohammed Ali Al-Serri, Sari and Abdul Aziz, Faieza and Zulkifli, Norzima (2018) Development of smart house model to control lighting, temperature, and gas leakage detection system. International Journal of Mechanical & Production Engineering, 6 (2). 69 - 72. ISSN 2320-2092; ESSN: 2321-2071

Mohd Afdzaluddin, Atiqah and Jawaid, Mohammad and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan (2018) Effect of surface treatment on the mechanical properties of sugar palm/glass fiber-reinforced thermoplastic polyurethane hybrid composites. BioResources, 13 (1). 1174 - 1188. ISSN 1930-2126

Mohd Ali, Maimunah and Janius, Rimfiel and Mat Nawi, Nazmi and Hashim, Norhashila (2018) Prediction of total soluble solids and pH in banana using near infrared spectroscopy. Journal of Engineering Science and Technology, 13 (1). 254 - 264. ISSN 1823-4690

Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah and Sukindar, Nor Aiman (2018) Analysis of mechanical properties of polylactic acid using a new 3D printer nozzle. Journal of Computational and Theoretical Nanoscience, 15 (2). 666 - 675. ISSN 1546-1955; ESSN: 1546-1963

Mohd Ariffin, Mohd Ruzaimi and Shafie, Suhaidi and Wan Hasan, Wan Zuha and Azis, Norhafiz and Ya'acob, Mohammad Effendy and Supeni, Eris Elianddy (2018) Photovoltaic panel temperature and heat distribution analysis for thermoelectric generator application. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Mohd Hassan, Siti Lailatul and Sulaiman, Nasri and Abdul Halim, Ili Shairah (2018) Low power pipelined FFT processor architecture on FPGA. In: 2018 9th IEEE Control and System Graduate Research Colloquium (ICSGRC 2018), 3-4 Aug. 2018, Grand Blue Wave Hotel, Shah Alam, Selangor. (pp. 31-34).

Mohd Husin, Ezrin and Wayayok, Aimrun and Bejo, Siti Khairunniza and Abdullah, A. F. (2018) Relationship between soil apparent electrical conductivity with nitrogen and CEC in oil palm plantation. In: 4th International Conference on Agricultural and Food Engineering (CAFEi 2018), 7-9 Nov. 2018, The Everly Putrajaya Hotel, Malaysia. (pp. 129-138).

Mohd Jamil, Nor Azreen (2018) Growth rate enhancement of tiger milk mushroom using electrical stimulation techniques. Masters thesis, Universiti Putra Malaysia.

Mohd Kassim, Adni Nurili and Mohtar, Mohd Nazim and Osman, N. H. and Shafie, Suhaidi (2018) Sensor fabrications using inkjet distributions and analysis systems. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Mohd Nasir, Mohd Solehin (2018) Lightning performance analysis of a rooftop grid- connected solar photovoltaic without external lightning protection system. Masters thesis, Universiti Putra Malaysia.

Mohd Noh, Hazariah and Yahaya, Nur Halimatun Radziah and Rodrigo, G. A. and Abdul Rahman, Nur Afdzillah and Yusof, M. R. and Othman, J. and Romli, Fairuz Izzuddin (2018) Sustainable biofuel: policy view for commercial aviation in Malaysia. International Journal of Engineering and Technology(UAE), 7 (4.13). 225 - 228. ISSN 2227-524X

Mohd Noh, Zarina and Ramli, Abdul Rahman and Hanafi, Marsyita and Saripan, M. Iqbal and Ramlee, Ridza Azri (2018) Palm vein pattern visual interpretation using laplacian and frangi-based filter. Indonesian Journal of Electrical Engineering and Computer Science, 10 (2). 578 - 586. ISSN 2502-4752; ESSN: 2502-4760

Mohd Nor, Ariff Farhan (2018) Enhancement of low velocity impact properties of bamboo/glass fibre hybrid composites using carbon nanotubes for aerospace structural applications. Masters thesis, Universiti Putra Malaysia.

Mohd Nor, Ariff Farhan and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Abu Talib, Abd. Rahim and Rayney Azmi, Ahmad Mustafa and Harmaen, Ahmad Saffian and Mohamed Asa’ari, Ainun Zuriyati (2018) The effects of multi-walled CNT in bamboo/glass fibre hybrid composites: tensile and flexural properties. BioResources, 13 (2). 4404 - 4415. ISSN 1930-2126

Mohd Nor, Elya (2018) Extended high-gain observer-based output feedback control of underactuated quadrotor. Doctoral thesis, Universiti Putra Malaysia.

Mohd Nor, Mohd Zuhair and Ramchandran, Lata and Duke, Mikel and Vasiljevic, Todor (2018) Performance of a two-stage membrane system for bromelain separation from pineapple waste mixture as impacted by enzymatic pretreatment and diafiltration. Food Technology and Biotechnology, 56 (2). 218 - 227. ISSN 1330-9862

Mohd Nor Munawar, Nur Sofeana Zulaika (2018) Properties of resin-impregnated sugar palm fibre- reinforced epoxy composites. Masters thesis, Universiti Putra Malaysia.

Mohd Rafie, Azmin Shakrine and Lay, Chuan Eun and Marzuki, Omar Faruqi and Wiriadidjaja, Surjatin (2018) An overview of passive and active drag reduction methods for bluff body of road vehicles. International Journal of Engineering and Technology (UAE), 7 (4.13). 53 - 56. ISSN 2227-524X

Mohd Rasdi, Norhafizah and Romli, Fairuz Izzuddin (2018) Quality function deployment for new standing cabin concept of commercial transport aircraft. Journal of Mechanical Engineering, SI 5 (2). 247 - 257. ISSN 1823-5514; ESSN: 2550-164X

Mohd Razali, Nazirah and Ambran, Sumiaty and Hamzah, Azura and Abdullah, Norhayati and Mikami, Osamu and Hara, Hirofumi and Lokman, Mohammad Quisar and Yaacob, Mohd Hanif (2018) Etched fiber Bragg grating sensor for nitrate sensing application. In: 2018 IEEE 7th International Conference on Photonics (ICP), 9-11 Apr. 2018, Langkawi, Kedah, Malaysia. .

Mohd Saiah, Helmey Ramdhaney and Mohd Rafie, Azmin Shakrine and Romli, Fairuz Izzuddin (2018) Freestream velocity correction in narrow channel. Journal of Mechanical Engineering, spec. 5 (2). 54 - 66. ISSN 1823-5514; ESSN: 2550-164X

Mohd Saiah, Helmey Ramdhaney and Mohd Rafie, Azmin Shakrine and Romli, Fairuz Izzudin and Mohd Harithuddin, Ahmad Salahuddin (2018) Semi-infinite solid heat transfer limitation. International Journal of Engineering and Technology, 7 (4 spec.13). art. no. 21347. 146 - 150. ISSN 2227-524X

Mohd Saupi, Almalik Faisel (2018) Performance analysis of hydrokinetic hybrid system with water velocity estimation technique for rural electrification in East Malaysia. Masters thesis, Universiti Putra Malaysia.

Mohd Selva, Amran and Yahaya, Muhammad Sharil and Azis, Norhafiz and Ab Kadir, Mohd Zainal Abidin and Jasni, Jasronita and Yang Ghazali, Young Zaidey (2018) Estimation of transformers health index based on condition parameter factor and hidden Markov model. In: 2018 IEEE 7th International Conference on Power and Energy (PECon), 3-4 Dec. 2018, Berjaya Times Square Hotel, Kuala Lumpur, Malaysia. (pp. 288-292).

Mohd Tohir, Mohd Zahirasri and Spearpoint, Michael and Fleischmann, Charles (2018) Prediction of time to ignition in multiple vehicle fire spread experiments. Fire and Materials, 42 (1). 69 - 80. ISSN 0308-0501; ESSN: 1099-1018

Mohd Yahya, Nor Akmar (2018) Hydrogen sensors using tapered optical fiber coated with metal oxide nanostructures synthesized via chemical bath deposition technique. Doctoral thesis, Universiti Putra Malaysia.

Mohd Yunos, Mohd Amirul Syafiq (2018) Hydrodynamics behavior in quadrilateral bubble column using industrial radiotracer techniques. Doctoral thesis, Universiti Putra Malaysia.

Mohd Yunos, Mohd Amirul Syafiq and Anak Usang, Mark Dennis and Ithnin, Hanafi and Hussain, Siti Aslina and Mohamed Yusoff, Hamdan and Sipaun, Susan (2018) Reconstruction algorithm of calibration map for RPT technique in quadrilateral bubble column reactor using MCNPX code. European Journal of Engineering Research and Sciences, 3 (1). 20 - 27. ISSN 1450-202X

Mohd Zad, Siti Najja and Zulkafli, Zed and Muharram, Farrah Melissa (2018) Satellite rainfall (TRMM 3B42-V7) performance assessment and adjustment over Pahang River Basin, Malaysia. Remote Sensing, 10 (3). art. no. 388. pp. 1-24. ISSN 2072-4292

Mohd Zahidi, Izni and Yusuf, Badronnisa and Cope, Mike and Mohammed Ali, Thamer Ahmed and Mohd Shafri, Elmi Zulhaidi (2018) Effects of depth-varying vegetation roughness in two-dimensional hydrodynamic modelling. International Journal of River Basin Management, 16 (4). 413 - 426. ISSN 1571-5124; ESSN: 1814-2060

Mohd Zainuri, Muhammad Ammirrul Atiqi and Mohd Radzi, Mohd Amran and Che Soh, Azura and Mariun, Norman and Abd Rahim, Nasrudin and Teh, Jiashen and Lai, Ching-Ming (2018) Photovoltaic integrated shunt active power filter with simpler ADALINE algorithm for current harmonic extraction. Energies, 11 (5). art. no. 1152. pp. 1-22. ISSN 1996-1073

Mohd Zobir, Syazwan Afif (2018) Preparation of graphene derivatives for supercapacitor application. Doctoral thesis, Universiti Putra Malaysia.

Mohd Zulkeple, Muhammad Fitri and Abu Talib, Abd Rahim and Gires, Ezanee and Hameed Sultan, M. T. and Ramli, M. S. (2018) Heat transfer performance of multiple holes impingement cooling technique. International Journal of Engineering and Technology, 7 (4). 43 - 52. ISSN 1793-8236

Mohmad Rouyan, Nurhana and Varatharajoo, Renuganth and Eshghi, Samira and Abdullah, Ermira Junita and Suzuki, Shinji (2018) Aircraft pitch control tracking with sliding mode control. International Journal of Engineering and Technology(UAE), 7 (4.13). 62 - 65. ISSN 2227-524X

Mokhtar, Ernieza Suhana (2018) Optimized flood inundation mapping using integrated gis and hydraulic model for ungauged river basin. Doctoral thesis, Universiti Putra Malaysia.

Mokhtar Baharudin, Muhammad Shafiq and Ibrahim, Rahinah and Abdan, Khalina and Rashidi, Ali (2018) Feasibility of green commercial vertical system for climbing food plant in urban area. ALAM CIPTA, International Journal on Sustainable Tropical Design Research & Practice, 11 (2). pp. 12-18. ISSN 1823-7231

Muda, Noor Azura (2018) Sub-critical water pyrolysis of oil palm trunk for production of bio-oil and solid product. Masters thesis, Universiti Putra Malaysia.

Mudhher, Kawa (2018) Structural, thermal and optical properties of zinc boro-aluminosilicate glasses for optical power amplification. Doctoral thesis, Universiti Putra Malaysia.

Muhadi, Nur 'atirah (2018) Improvement of vertical height accuracy using data fusion technique for terrain mapping in oil palm plantation. Masters thesis, Universiti Putra Malaysia.

Muhamad Parid, Dzieda (2018) Characterization of extracted carboxymethyl cellulose from oil palm empty fruit bunch stalk fibers for ice cream application. Masters thesis, Universiti Putra Malaysia.

Muhamad Parid, Dzieda and Abd Rahman, Nur Aliaa and Samsu Baharuddin, Azhari and P. Mohammed, Mohd Afandi and Mat Johari, Amiruddin and Abdul Razak, Siti Zubaidah (2018) Synthesis and characterization of carboxymethyl cellulose from oil palm empty fruit bunch stalk fibres. BioResources, 13 (1). 535 - 554. ISSN ESSN: 1930-2126

Muhammad, Muhammad Tahir and Haron, Nuzul Azam and Ales @ Alias, Aidi Hizami and Harun, Aizul Nahar and Muhammad, Isa Bala and Baba, Dorothy Ladi (2018) Improving cost and time control in construction using Building Information Model (BIM): a review. Pertanika Journal of Science & Technology, 26 (1). pp. 21-36. ISSN 0128-7680; ESSN: 2231-8526

Muhammad, Nazalea Yazmin and Mohtar, Mohd Nazim and Ramli, Muhammad M. and Shafie, Suhaidi (2018) Carbon based material for dye sensitized solar cells. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Muhammad, Noryani and Salit, Mohd Sapuan and Mohammad Taha, Mastura (2018) Multi-criteria decision-making tools for material selection of natural fibre composites: a review. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3330-3353. ISSN 2289-4659; ESSN: 2231-8380

Muhammad, Noryani and Salit, Mohd Sapuan and Mohammad Taha, Mastura and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams (2018) Stepwise regression for kenaf reinforced polypropylene composite. In: 5th Mechanical Engineering Research Day (MERD'18), 3 May 2018, Kampus Teknologi UTeM, Melaka. (pp. 48-49).

Muhammad, Noryani and Salit, Mohd Sapuan and Mohammad Taha, Mastura and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams (2018) A statistical framework for selecting natural fibre reinforced polymer composites based on regression model. Fibers and Polymers, 19 (5). pp. 1039-1049. ISSN 1229-9197; ESSN: 1875-0052

Muhammad Gazali, Umar and Man, Norsida and Abdullah, Amin Mahir and Mohd Nawi, Nolila and Abd. Latif, Ismail (2018) Partial test of social marketing strategy on smallholder farmers flood preparedness behavior in East Coast Malaysia. IOSR Journal of Agriculture and Veterinary Science (IOSR-JAVS), 11 (3). 24 - 36. ISSN 2319-2372; ESSN: 2319-2380

Mujeli, Mustapha and Hussain, Siti Aslina and Ismail, Mohd Halim Shah and Awang Biak, Dayang Radiah and Jami, Mohammed Saedi (2018) Screening of electrocoagulation process parameters for treated palm oil mill effluent using minimun-runs resolution IV design. International Journal of Environmental Science and Technology, 16 (8). pp. 811-820. ISSN 1735-1472; ESSN: 1735-2630

Mukhtar, Isma'ila (2018) Glass/sugar palm [Arenga pinnata (Wurmb. Merr.)] fibre- reinforced polypropylene hybrid composite automotive side door impact beam. Doctoral thesis, Universiti Putra Malaysia.

Munther, Munther Numan (2018) Secure address resolution protocol proxy in software defined network. Masters thesis, Universiti Putra Malaysia.

Murthy, Avinash Srikanta and Azis, Norhafiz and Al-Ameri, Salem and Mohd Yousof, Mohd Fairouz and Jasni, Jasronita and Talib, Mohd Aizam (2018) Investigation of the effect of winding clamping structure on frequency response signature of 11 kV distribution transformer. Energies, 11 (9). art. no. 2307. pp. 1-13. ISSN 1996-1073

Murthy, Avinash Srikanta and Azis, Norhafiz and Mohd Yousof, Mohd Fairouz and Jasni, Jasronita and Othman, Mohammad Lutfi and Talib, Mohd Aizam and Das, Bhaba Priyo (2018) Investigation on the transient voltage in a 11 kV transformer under lightning surges. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Musa, Afiqah (2018) Scanning laser thermographic system for non-destructive evaluation of incipient thermal damages in aircraft composite panel. Masters thesis, Universiti Putra Malaysia.

Musa, Mohammed Ali and Idrus, Syazwani and Che Man, Hasfalina and Nik Daud, Nik Norsyahariati (2018) Effect of organic loading rate on anaerobic digestion performance of mesophilic (UASB) reactor using cattle slaughterhouse wastewater as substrate. International Journal of Environmental Research and Public Health, 15 (10). pp. 1-19. ISSN 1661-7827; ESSN: 1660-4601

Musa, Mohammed Ali and Idrus, Syazwani and Che Man, Hasfalina and Nik Daud, Nik Norsyahariati (2018) Wastewater treatment and biogas recovery using anaerobic membrane bioreactors (AnMBRs): strategies and achievements. Energies, 11. art. no. 1675. pp. 1-24. ISSN 1996-1073; ESSN: 1996-1073

Muslim, May Ali and Abdul Rashid, Suraya and Hamidon, Mohd Nizar and Md Yasin, Faizah (2018) Facile synthesis and characterization of multi-layer graphene growth on Co-Ni oxide/Al2O3 substrate using chemical vapour deposition. Bulletin of Chemical Reaction Engineering and Catalysis, 13 (2). 341 - 354. ISSN 1978-2993

Mustafa, Mayada Salih Abdalla and Mohd Ali, Borhanuddin and Hashim, Shaiful Jahari and Rated, Mohd F. B. A. (2018) Work in progress: proactive immunization against multiple sink holes in wireless sensor network to extend its life span. Advanced Science Letters, 24 (3). pp. 1852-1855. ISSN 1936-6612; ESSN: 1936-7317

Mustafa Albakri, Zulfadhli (2018) Development of 3 dimensional point cloud analysis technique to determine maturity of oil palm fresh fruit bunch based on frond position in oil palm phyllotaxis. Masters thesis, Universiti Putra Malaysia.

Mustapha Kamil, Yasmin (2018) Development of tapered optical fiber-based sensor for detection of dengue II e proteins. Doctoral thesis, Universiti Putra Malaysia.

Mustapha Kamil, Yasmin and Abu Bakar, M. H. and Mustapa, Mohd Azmir and Yaacob, Mohd Hanif and Zainol Abidin, Nadiah Husseini and Syahir, Amir and Lee, Huijing and Mahdi, Mohd Adzir (2018) Label-free dengue E protein detection using a functionalized tapered optical fiber sensor. Sensors and Actuators B: Chemical, 257. 820 - 828. ISSN 0925-4005; ESSN: 1873-3077

Na Songkhla, Thitima (2018) Development of comprehensive safety management assessment of liquefied petroleum gas stations in Suratthani, Thailand. Doctoral thesis, Universiti Putra Malaysia.

Nahhas, Faten Hamed (2018) Development of deep learning-based fusion method for building detection using LiDAR and very high resolution images. Doctoral thesis, Universiti Putra Malaysia.

Nahhas, Faten Hamed and Mohd Shafri, Helmi Zulhaidi and Sameen, Maher Ibrahim and Pradhan, Biswajeet and Mansor, Shattri (2018) Deep learning approach for building detection using LiDAR–orthophoto fusion. Journal of Sensors, 2018 (1). art. no. 7212307. pp. 1-12. ISSN 1687-725X; ESSN: 1687-7268

Nai Sowat, Sharence and Wan Ismail, Wan Ishak and Mahadi @ Othman, Muhammad Razif and Bejo, Siti Khairunniza and Mohd Kassim, Muhamad Saufi (2018) Trend in the development of oil palm fruit harvesting technologies in Malaysia. Jurnal Teknologi (Sciences and Engineering), 80 (2). 83 - 91. ISSN 2180-3722; ESSN: 0127-9696

Narayana, Gandham Lakshmi and Kityk, Iwan V. and Mahdi, Mohd Adzir and Plucinski, Kazimierz Jerzy (2018) Er/Pr-codoped borotellurite glasses as efficient laser operated nonlinear optical materials. Materials Letters, 214. 23 - 25. ISSN 0167-577X

Narayana, Gandham Lakshmi and Kumar, Ashok and Dong, Mengge G. and Sayyed, M. I. and Long, Nguyen Viet and Mahdi, Mohd Adzir (2018) Exploration of gamma radiation shielding features for titanate bismuth borotellurite glasses using relevant software program and Monte Carlo simulation code. Journal of Non-Crystalline Solids, 481. 65 - 73. ISSN 0022-3093

Naseri, Mahmoud and Sadrolhosseini, Amir Reza and Yap, Wing Fen and Mahdi, Mohd Adzir (2018) Measurement of low magnesium concentration in aqueous solution. Sensors and Materials, 30 (5). 1019 - 1026. ISSN 0914-4935; ESSN: 2435-0869

Nasidi, Nuraddeen Mukhtar and Wayayok, Aimrun and Sani, K. M. and Shanono, N. J. and Zakari, M. D. (2018) Reclamation of irrigated sodic soil using millet chaff as an amendment. In: 4th International Conference on Agricultural and Food Engineering (CAFEi 2018), 7-9 Nov. 2018, The Everly Putrajaya Hotel, Malaysia. (pp. 62-73).

Nasrudin, Nurul Reffa Azyan and Mazlan, Norkhairunnisa and Mohd Basri, Mohd Salahuddin and Mohamed Ariff, Azmah Hanim and Mohd. Nasir, Noor Azline (2018) Thermogravimetric analysis on rice husk ashes-based geopolymer paste. IOP Conference Series: Materials Science and Engineering, 405. art. no. 012014. pp. 1-7. ISSN 1757-8981; EISSN: 1757-899X

Nawi, Mohd Nuriman and Majlis, B. Y. and Mahdi, Mohd Adzir and De La Rue, R. M. and Lonca, M. and Md Zain, A. R. (2018) Enhancement and reproducibility of high quality factor, one-dimensional photonic crystal/photonic wire (1D PhC/PhW) microcavities. Journal of the European Optical Society-Rapid Publications, 14 (1). pp. 1-14. ISSN 1990-2573

Nawi, Mohd Nuriman and Rashid, Nurulhani Diana and Berhanuddin, Dilla Duryha and Yeop Majlis, Burhanuddin and Mahdi, Mohd Adzir and Md Zain, Ahmad Rifqi (2018) Photonic crystal embedded waveguide for compact C-band band-pass filter. In: 13th IEEE International Conference on Semiconductor Electronics (ICSE2018), 15-17 Aug. 2018, Pullman Kuala Lumpur City Centre Hotel & Residence, Kuala Lumpur, Malaysia. (pp. 180-183).

Ng, Choy Peng and Law, Teik Hua and Mohd Jakarni, Fauzan and K. C. Mani @ Subramanian, Kulanthayan (2018) Relative improvements in road mobility as compared to improvements in road accessibility and urban growth: a panel data analysis. Transportation Research Part A: Policy and Practice, 117. 292 - 301. ISSN 0965-8564, ESSN: 1879-2375

Ng, Jing Lin and Abd Aziz, Samsuzana and Huang, Yuk Feng and Wayayok, Aimrun and Kamal, Md Rowshon (2018) Generation of a stochastic precipitation model for the tropical climate. Theoretical and Applied Climatology, 133. 489 - 509. ISSN 0177-798X; ESSN: 1434-4483

Ng, Khai Mun (2018) Potential of harnessing incident solar energy in building shading device for thermal application. Doctoral thesis, Universiti Putra Malaysia.

Ng, Lin Cieh (2018) Effect of different coupling agents in covalent enzyme immobilization on kenaf micro fibre (pdf author Ng Lin Cieh). Masters thesis, Universiti Putra Malaysia.

Ng, Paul Yong (2018) Adaptive kernel interpolation on 3D image reconstruction of breast ultrasound images. Masters thesis, Universiti Putra Malaysia.

Ngabura, Mohammed and Hussain, Siti Aslina and Wan Ab Karim Ghani, Wan Azlina and Jami, Mohammed Saedi and Tan, Yen Ping (2018) Utilization of renewable durian peels for biosorption of zinc from wastewater. Journal of Environmental Chemical Engineering, 6 (2). 2528 - 2539. ISSN 2213-3437

Nik Daud, Nik Norsyahariati and Anijiofor, Sandra Chinenyenwa (2018) Chicken slaughterhouse wastewater disposal: the challenges ahead. Asian Journal of Agriculture and Biology (spec.). pp. 42-45. ISSN 2307-8553

Nik Daud, Nik Norsyahariati and Richard, Adesiji Adeolu and Sayok, Alexander Kiew and Rory, Padfield and Mohammed, Thamer Ahmed (2018) Soil carbon and nitrogen dynamics in a tropical peatland. In: Soil Management and Climate Change. Academic Press Elsevier, U.S.A, 73 - 83. ISBN 9780128121283

Noor Hasnan, Noor Zafira and Md Yusoff, Yuzainee (2018) Short review: application areas of Industry 4.0 technologies in food processing sector. In: 2018 IEEE 16th Student Conference on Research and Development (SCOReD), 26-28 Nov. 2018, Selangor, Malaysia. .

Nordin, Norhazirah and Othman, Siti Hajar and Kadir, Roseliza and Abdul Rashid, S. (2018) Mechanical and thermal properties of starch films reinforced with microcellulose fibres. Food Research, 2 (6). 555 - 563. ISSN 0095-974X

Norizan, Mohd Nurazzi (2018) Development of sugar palm yarn and woven glass fibre-reinforced unsaturated polyester composites. Doctoral thesis, Universiti Putra Malaysia.

Norizan, Mohd Nurazzi and Abdan, Khalina and Salit, Mohd Sapuan and Mohamed, Rahmah (2018) The effect of alkaline treatment on the mechanical properties of treated sugar palm yarn fibre reinforced unsaturated polyester composites reinforced with different fibre loadings of sugar palm fibre. Sains Malaysiana, 47 (4). 699 - 705. ISSN 0126-6039

Olufemi, Osaji Emmanuel and Othman, Mohammad Lutfi and Hizam, Hashim and Othman, Mohammad Murtadha and Ammar, Aker Elhadi Emhemed Alhaaj and Akachukwu, Okeke Chidiebere and Onuabuchi, Nwagbara Samuel (2018) Faults signature extraction in wind farm integrated Transmission Line topology. Indonesian Journal of Electrical Engineering and Computer Science, 12 (1). 246 - 253. ISSN 2502-4752; ESSN: 2502-4760

Omar, Hend Ali and Md. Yusoff, Nur Izzi and Ceylan, Halil and Abdul Rahman, Irman and Sajuri, Zainuddin and Mohd Jakarni, Fauzan and Ismail, Amiruddin (2018) Determining the water damage resistance of nano-clay modified bitumens using the indirect tensile strength and surface free energy methods. Construction and Building Materials, 167. 391 - 402. ISSN 0950-0618; ESSN: 1879-0526

Omar, Husaini and Ahmad, Juraidah and Nahazanan, Haslinda and Mohammed, Thamer Ahmed and M. Yusoff, Zainuddin (2018) Measurement and simulation of diametrical and axial indirect tensile tests for weak rocks. Measurement, 127 (-). 299 - 307. ISSN 0263-2241; ESSN: 1873-412X

Onwude, Daniel Iroemeha Chikwendu (2018) Mathematical modelling of combined infrared and hot air drying of sliced sweet potato (Ipomoea batatas L.). Doctoral thesis, Universiti Putra Malaysia.

Onwude, Daniel L. and Hashim, Norhashila and Abdan, Khalina and Janius, Rimfiel B. and Chen, Guangnan (2018) Numerical modeling of radiative heat and mass transfer for sweet potato during drying. Journal of food processing and preservation, 42 (10). pp. 1-14. ISSN 0145-8892; ESSN: 1745-4549

Othman, Muhammad Murtadha and Musirin, Ismail and Mohd Rosli, Ain Munirah and Othman, Mohammad Lutfi (2018) Reliability-based phasor measurement unit with outage of transmission lines. International Journal of Engineering and Technology (UAE), 7 (3.15). 163 - 167. ISSN 2227-524X

Othman, Nurhanisah and Masarudin, Mas Jaffri and Cha, Yee Kuen and Dasuan, Nurul Azira and Abdullah, Luqman Chuah and Md. Jamil, Siti Nurul Ain (2018) Synthesis and optimization of chitosan nanoparticles loaded with l-ascorbic acid and thymoquinone. Nanomaterials, 8 (920). pp. 1-19. ISSN 2079-4991; ESSN: 2079-4991

Pang, W. S. and Shee, Yu Gang and Abd Rahman, Faidz and Mahamd Adikan, Faisal Rafiq and Mahdi, Mohd Adzir (2018) Post-amplified reversed S-shaped Brillouin-erbium fiber laser. In: 2018 IEEE 16th Student Conference on Research and Development (SCOReD), 26-28 Nov. 2018, Selangor, Malaysia. .

Parnianifard, Amir (2018) Development of metamodel-based robust simulation optimization for complex systems under uncertainty. Doctoral thesis, Universiti Putra Malaysia.

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2018) Kriging-assisted robust black-box simulation optimization in direct speed control of DC motor under uncertainty. IEEE Transactions on Magnetics, 54 (7). pp. 1-9. ISSN 0018-9464

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah and Maghami, Mohammad Reza and Gomes, Chandima (2018) Kriging and Latin hypercube sampling assisted simulation optimization in optimal design of PID controller for speed control of DC motor. Journal of Computational and Theoretical Nanoscience, 15 (5). 1471 - 1479. ISSN 1546-1955; ESSN: 1546-1963

Penjumras, Patpen (2018) Development of antioxidant packaging material based on optimized poly (lactic acid) and cellulose from durian rind biocomposites. Doctoral thesis, Universiti Putra Malaysia.

Phoon, Kah Yee (2018) Enrichment of bioactive minor components from CPO and PPMFO by sequential adsorption-desorption technique. Masters thesis, Universiti Putra Malaysia.

Phoon, Kah Yee and Ng, Hui Suan and Zakaria, Rabitah and Yim, Hip Seng and Mokhtar, Mohd Noriznan (2018) Enrichment of minor components from crude palm oil and palm-pressed mesocarp fibre oil via sequential adsorption-desorption strategy. Industrial Crops and Products, 113. 187 - 195. ISSN 0926-6690

Pour, Somayeh Rahimi (2018) Reliability modeling of dynamic thermal management in multicore processor. Doctoral thesis, Universiti Putra Malaysia.

Pui, Liew Phing and Karim, Roselina and Yusof, Yus Aniza and Wong, Chen Wai and Mohd Ghazali, Hasanah (2018) Physicochemical and sensory properties of selected 'cempedak' (Artocarpus integer L.) fruit varieties. International Food Research Journal, 25 (2). pp. 861-869. ISSN 1985-4668; ESSN: 2231-7546

Pui, Liew Phing and Karim, Roselina and Yusof, Yus Aniza and Wong, Chen Wai and Mohd Ghazali, Hasanah (2018) Physicochemical and sensory properties of selected cempedak (Artocarpus integer L.) fruit varieties. International Food Research Journal, 25 (2). 861 - 869. ISSN 1985-4668; ESSN: 1505-5337

Qader, Bootan Sherzad (2018) Computational fluid dynamics analysis on thermal performance of solar air heater with inclined fins. Masters thesis, Universiti Putra Malaysia.

Quiroz, Juan C. and Mariun, Norman and Mehrjou, Mohammad Rezazadeh and Izadi, Mahdi and Misron, Norhisam and Mohd Radzi, Mohd Amran (2018) Fault detection of broken rotor bar in LS-PMSM using random forests. Measurement, 116. 273 - 280. ISSN 0263-2241

Quzwain, Kamelia M. Chatib and Ismail, Alyani and Sali, Aduwati (2018) A high gain double-octagon fractal microstrip yagi antenna. Progress In Electromagnetics Research Letters, 72. 83 - 89. ISSN 1937-6480

Rahman, Ziaur and Hashim, Fazirulhisyam and A. Rasid, Mohd Fadlee and Othman, Mohamed (2018) Totally Opportunistic Routing Algorithm (TORA) for underwater wireless sensor network. PLoS One, 13 (6). art. no. e0197087. pp. 1-28. ISSN EISSN: 1932-6203

Raid, Fadi Imad Osman Abu and Syed Ahmad, Sharifah Mumtazah and Hashim, Shaiful Jahari and Samsudin, Khairulmizam and Ali, Marwan (2018) Real-time pen input system for writing utilizing stereo vision. Journal of Computers, 13 (9). 1000 - 1009. ISSN 1796-203X

Raja Abdullah, Raja Syamsul Azmir and Saleh, Nur Luqman and Syed Ahmad Abdul Rahman, Sharifah Mumtazah and Salah, Asem Ahmad Mohamad and Abdul Rashid, Nur Emileen (2018) Detection of human echo locator waveform using gammatone filter processing. In: 2018 International Conference on Radar (RADAR), 27-31 Aug. 2018, Brisbane, Queensland, Australia. .

Raja Shahruzzaman, Raja Mohamad Hafriz and Ali, Salmiaton and Yunus, Robiah and Yap, Taufiq Yun Hin (2018) Green biofuel production via catalytic pyrolysis of Waste Cooking Oil using Malaysian Dolomite catalyst. Bulletin of Chemical Reaction Engineering and Catalysis, 13 (3). 489 - 501. ISSN 1978-2993

Rajesh, Murugan and Hameed Sultan, Mohamed Thariq and Uthayakumar, Marimuthu and Jayakrishna, Kandasamy and Md Shah, Ain Umaira (2018) Dynamic behaviour of woven bio fiber composite. BioResources, 13 (1). 1951 - 1960. ISSN 1930-2126

Ramakrishnan, Yogeshini and Mohd Adzahan, Noranizan and Yusof, Yus Aniza and Syed Muhammad, Sharifah Kharidah (2018) Effect of wall materials on the spray drying efficiency, powder properties and stability of bioactive compounds in tamarillo juice microencapsulation. Powder Technology, 328. 406 - 414. ISSN 0032-5910; ESSN: 1873-328X

Ramli, Abdul Rahman and Hanafi, Marsyita and Ramlee, Ridza Azri and Mohd Noh, Zarina and Khmag, Asem (2018) Classification of eye abnormality using statistical parameters in texture features of corneal arcus image. Advanced Science Letters, 24 (6). 4063 - 4069. ISSN 1936-6612; ESSN: 1936-7317

Ramli, N and Mazlan, Norkhairunnisa and Ando, Yoshito and Leman, Z. (2018) Natural fiber for green technology in automotive industry: a brief review. IOP Conference Series: Materials Science and Engineering, 368 (2018). 1-Aug.

Ramli, Nurul Infaza Talalah and Abdul Rashid, Suraya and Mamat, Md Shuhazlly and Sulaiman, Yusran and Krishnan, Shutesh (2018) Incorporation of iron oxide into CNT/GNF as a high performance supercapacitor electrode. Materials Chemistry and Physics, 212. 318 - 324. ISSN 0254-0584; ESSN: 1879-3312

Ramli, Saliza and Raja Ahmad, Raja Mohd Kamil and Ahmad, Siti Anom and Mahmud, Rozi and Mohtarrudin, Norhafizah (2018) Trends of skin blood flow response signals for early pressure ulcer evaluation. In: 2018 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 3-6 Dec. 2018, Kuching, Sarawak, Malaysia. (pp. 245-250).

Rashid, Nurulhani Diana and Berhanuddin, Dilla Duryha and Mahdi, Mohd Adzir and Yeop Majlis, Burhanuddin and Md Zain, Ahmad Rifqi (2018) Design and simulation of tapered optical fiber by enhancing the evanescent field region for sensing application. In: 13th IEEE International Conference on Semiconductor Electronics (ICSE2018), 15-17 Aug. 2018, Pullman Kuala Lumpur City Centre Hotel & Residence, Kuala Lumpur, Malaysia. (pp. 188-191).

Rayney Azmi, Ahmad Mustafa (2018) Development of composite hybridization of kenaf fibre and x-ray film for aerospace ballistic impact applications. Masters thesis, Universiti Putra Malaysia.

Rayney Azmi, Ahmad Mustafa and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Abu Talib, Abd Rahim and Mohd Nor, Ariff Farhan (2018) Tensile and flexural properties of a newly developed bulletproof vest using a kenaf/x-ray film hybrid composite. BioResources, 13 (2). 4416 - 4427. ISSN ESSN: 1930-2126

Razali, Nadlene and Salit, Mohd Sapuan and Jawaid, Mohammad and M. R., Ishak and L., Yusriah (2018) The effects of chemical treatment on the structural and thermal, physical, and mechanical and morphological properties of roselle fiber-reinforced vinyl ester composites. Polymer Composites, 39 (1). 274 - 287. ISSN 0272-8397; ESSN: 1548-0569

Razali, S. Z. and Yunus, Robiah and Abdul Rashid, Suraya and Lim, Hong Ngee and Mohamed Jan, Badrul (2018) Review of biodegradable synthetic-based drilling fluid: progression, performance and future prospect. Renewable and Sustainable Energy Reviews, 90. 171 - 186. ISSN 1364-0321

Razzaq, Alaa Mohammed (2018) Mechanical and tribological enhancement of AA6063 aluminum alloy using solid sphere fly ash particles reinforcement. Doctoral thesis, Universiti Putra Malaysia.

Rezaei, Nima and Uddin, Mohammad Nasir and Amin, Ifte Khairul and Othman, Mohammad Lutfi and Marsadek, Marayati (2018) Genetic algorithm based optimization of overcurrent relay coordination for improved protection of DFIG operated wind farms. In: 2018 IEEE Industry Applications Society Annual Meeting (IAS), 23-27 Sept. 2018, Portland, Oregon, USA. (pp. 1-8).

Rezaei, Nima and Uddin, Mohammad Nasir and Amin, Ifte Khairul and Othman, Mohammad Lutfi and Zainal Abidin, Izham (2018) Grey wolf optimization based improved protection of wind power generation systems. In: 2018 IEEE Industry Applications Society Annual Meeting (IAS), 23-27 Sept. 2018, Portland, Oregon, USA. (pp. 1-8).

Riazuddin, Vizy Nazira (2018) Computational fluid dynamics study of airflow and particle deposition in diseased nasal airway. Doctoral thesis, Universiti Putra Malaysia.

Rohani, Fuaad (2018) Optimization of the Jakim halal logo placement on qr code using enhanced genetic algorithm. Masters thesis, Universiti Putra Malaysia.

Romli, Fairuz Izzuddin and Aminian, Negin Ozve (2018) Ergonomic analysis of aircraft passenger seat: a Malaysian case study. International Journal of Pure and Applied Mathematics, 119 (15b spec.). 3749 - 3753. ISSN 1311-8080; ESSN: 1314-3395

Romli, Fairuz Izzuddin and Rashid, Hassan and Harmin, Mohammad Yazdi (2018) Market potential for personal air vehicle (PAV) concept: a Malaysian case study. International Journal of Pure and Applied Mathematics, 119 (spec. 15). 3755 - 3760. ISSN 1311-8080; ESSN: 1314-3395

Roslan, Jumardi and Mustapa Kamal, Siti Mazlina and Md. Yunos, Khairul Faezah and Abdullah, Norhafizah (2018) Evaluation on performance of dead-end ultrafiltration membrane in fractionating tilapia by-product protein hydrolysate. Separation and Purification Technology, 195. 21 - 29. ISSN 1383-5866

Roslan, Jumardi and Mustapa Kamal, Siti Mazlina and Md. Yunos, Khairul Faezah and Abdullah, Norhafizah (2018) A comparative study between tilapia (Oreochromis niloticus) by-product and tilapia protein hydrolysate on angiotensin I-converting enzyme (ACE) inhibition activities and functional properties. Sains Malaysiana, 47 (2). pp. 309-318. ISSN 0126-6039

Roslan, Nadirah and Ya'acob, Mohammad Effendy and Mohd Radzi, Mohd Amran and Hashimoto, Yoshio and Jamaludin, Diyana and Chen, Guangnan (2018) Dye Sensitized Solar Cell (DSSC) greenhouse shading: new insights for solar radiation manipulation. Renewable and Sustainable Energy Reviews, 92. 171 - 186. ISSN 1364-0321

Rosli, Nurul Shafiqah (2018) Rice straw washwater with urea and co-digestion of anaerobic treatment application. Masters thesis, Universiti Putra Malaysia.

Rosly, Nur Asyikin and Harmin, Mohammad Yazdi and Abdul Majid, Dayang Laila Abang (2018) Preliminary investigation on experimental modal analysis of high aspect ratio rectangular wing model. International Journal of Engineering and Technology (UAE), 7 (4.13). art. no. 21348. 151 - 154. ISSN 2227-524X

Rushdan, Ahmad Ilyas and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams (2018) Development and characterization of sugar palm nanocrystalline cellulose reinforced sugar palm starch bionanocomposites. Carbohydrate Polymers, 202. 186 - 202. ISSN 0144-8617; ESSN: 1879-1344

Ruslan, Rashidah and Ibrahim, Mohd Firdaus and Bejo, Siti Khairunniza and Aznan, Aimi Athirah and Rukunudin, Ibni Hajar and Azizan, Fathin Ayuni (2018) Effect of background color on rice seed image segmentation using machine vision. In: 1st International Conference on Computational Approach in Smart Systems Design and Applications (ICASSDA 2018), 15-17 Aug. 2018, Hilton Hotel, Kuching, Sarawak, Malaysia. .

Ruslan, Siti Aisyah and Muharam, Farrah Melissa and Omar, Dzolkhifli and Zulkafli, Zed Diyana and Zambri, Muhammad Pilus (2018) Remotely sensed relative humidity for predicting Metisa plana's population oil palm plantations. In: 39th Asian Conference on Remote Sensing (ACRS 2018), 15-19 Oct. 2018, Renaissance Kuala Lumpur Hotel, Malaysia. (pp. 745-752).

Saadon, Syamimi (2018) Computational modelling of an Organic Rankine Cycle (ORC) waste heat recovery system for an aircraft engine. MATEC Web of Conferences, 151. art. no. 02001. pp. 1-6. ISSN 2274-7214; ESSN: 2261-236X

Sabri, Sabri Yasameen Hussein (2018) Custom Neural networks modelling for semitransparent thin film photovoltaic. Masters thesis, Universiti Putra Malaysia.

Sabri, Yasmeen H. and Wan Hasan, Wan Zuha and Shafie, Suhaidi and Mohd Radzi, Mohd Amran and Sabry, Ahmed H. (2018) Daily harvested energy of cadmium telluride thin Film photovoltaic. Indonesian Journal of Electrical Engineering and Computer Science, 11 (1). 18 - 26. ISSN 2502-4752; ESSN: 2502-4760

Sabry, Ahmad H. and Wan Hasan, Wan Zuha and Ab Kadir, M. Zainal A. and Mohd Radzi, Mohd Amran and Shafie, Suhaidi (2018) Field data-based mathematical modeling by Bode equations and vector fitting algorithm for renewable energy applications. PLoS One, 13 (1). pp. 1-29. ISSN 1932-6203

Sabry, Ali Hussein (2018) Peak pressure analysis of foot plantar distribution based on image processing algorithm. Masters thesis, Universiti Putra Malaysia.

Sabry, Ali Hussein and Sabry, Ahmed and Wan Hasan, Wan Zuha and Mohtar, Mohd Nazim and Raja Ahmad, Raja Mohd Kamil and Harun @ Ramli, Hafiz Rashidi and Ang, Swee Peng and Abdul Hamid, Zainidi (2018) Foot plantar pressure distribution modeling based on image processing. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Sabry, Ali Hussein and Wan Hasan, Wan Zuha and Mohtar, Mohd Nazim and Raja Ahmad, Raja Mohd Kamil and Harun @ Ramli, Hafiz Rashidi (2018) Plantar pressure repeatability data analysis for healthy adult based on EMED system. Malaysian Journal of Fundamental and Applied Sciences, 14 (1). pp. 96-101. ISSN 2289-5981; ESSN: 2289-599X

Sabry, Riyadh Zaki and Chandima Gomes, Gorakanage Arosha and Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Hizam, Hashim and Jasni, Jasronita (2018) Experimental investigation on breakdown characteristics of sand, bentonite and their mixes. Journal of Electrostatics, 93. 79 - 84. ISSN 0304-3886

Sabry, Yasmeen Hussein and Wan Hasan, Wan Zuha and Sabry, Ahmad H. and Ab Kadir, Mohd Zainal Abidin and Mohd Radzi, Mohd Amran and Shafie, Suhaidi (2018) Measurement-based modeling of a semitransparent CdTe thin-film PV module based on a custom neural network. IEEE Access, 6. pp. 34934-34947. ISSN 2169-3536

Safiee, Nor Azizi and Abu Bakar, Nabilah and Mohd Nasir, Noor Azline and Ashour, Ashraf Fawzy (2018) Behaviour of interlocking mortarless hollow block walls under in-plane loading. Australian Journal of Structural Engineering, 19 (2). 87 - 95. ISSN 1328-7982

Safri, Syafiqah Nur Azrie (2018) Mechanical, thermal and impact damage characterization of hybridised long sugar palm/glass fibre-reinforced polymer composites. Doctoral thesis, Universiti Putra Malaysia.

Saharkhiz, Maryam Adel and Pradhan, Biswajeet and Rizeei, Hossein Mojaddadi and Mohamed Shariff, Abdul Rashid (2018) Extraction of forest plantation extents using majority voting classification fusion algorithm. In: 39th Asian Conference on Remote Sensing (ACRS 2018), 15-19 Oct. 2018, Renaissance Kuala Lumpur Hotel, Malaysia. (pp. 1971-1979).

Saleh, Suhairie and Cholan, Noran Azizan and Sulaiman, Abdul Hadi and Mahdi, Mohd Adzir (2018) Stable multiwavelength erbium-doped random fiber laser. IEEE Journal of Selected Topics in Quantum Electronics, 24 (3). 240 - 246. ISSN 1077-260X; ESSN: 1558-4542

Salihu, Mustafa Shehu (2018) A dual iron-ring double-stator permanent magnet integrated with a magnetic gear for low speed power generator. Doctoral thesis, Universiti Putra Malaysia.

Salim, Nur Ashida and Jasni, Jasronita and Ab Wahab, Norfishah and Ab Aziz, Nur Fadilah and Rahmat, Nur Azzammudin and Mat Yasin, Zuhaila and Mohamad, Hasmaini (2018) Determination of CCT due to interconnected link tripping using the OMIB and EAC. International Journal of Engineering and Technology(UAE), 7 (4 spec. 22). art. no. 22187. 42 - 48. ISSN 2227-524X

Salim, Nur Ashida and Othman, Muhammad Murtadha and Jasni, Jasronita and Musirin, Ismail and Serwan, Mohd Salleh (2018) Modeling and evaluating the customer interruption cost due to dynamic electrical power and energy failure. International Journal of Electrical Power & Energy Systems, 103. 603 - 610. ISSN 0142-0615; ESSN: 1879-3517

Salit, Mohd Sapuan and Ishak, Muhammad Ammar and Leman, Zulkiflle and Ishak, Mohamad Ridzwan (2018) Water absorption of environment friendly sugar palm fibre reinforced vinyl ester composites at different fibre arrangements. Trends in Textile Engineering and Fashion Technology, 3 (1). pp. 262-265. ISSN 2578-0271

Salit, Mohd Sapuan and Mansor, Muhd Ridzuan (2018) Concurrent conceptual design and materials selection of natural fiber composite products. Springer Nature, Singapore. ISBN 9789811065897; EISBN: 9789811065910

Salman, Emad Hmood (2018) Energy detection for spectrum sensing in OFDM-based cooperative and non-cooperative radio networks. Doctoral thesis, Universiti Putra Malaysia.

Salman, Emad Hmood and Al-Karawi, Yassir Ameen Ahmed and Ahmed, Abdul Munem and Taher, Montadar Abas and Noordin, Nor Kamariah and Hashim, Shaiful Jahari and Hashim, Fazirulhisyam (2018) On the energy detection performance based Welch's DCT algorithm in cognitive radio systems. In: 2018 1st International Scientific Conference of Engineering Sciences - 3rd Scientific Conference of Engineering Science (ISCES), 10-11 Jan. 2018, Diyala, Iraq. (pp. 135-139).

Salman, Suhad D. and Leman, Zulkifli and Ishak, Mohamad Ridzwan and Hameed Sultan, Mohamed Thariq and Cardona, F. (2018) Quasi-static penetration behavior of plain woven kenaf/aramid reinforced polyvinyl butyral hybrid laminates. Journal of Industrial Textiles, 47 (7). 1427 - 1446. ISSN 1528-0837; ESSN: 1530-8057

Salman, Suhad Dawood and Md Zain, Aini Nazmin and Leman, Zulkiflle (2018) Effect of natural durian skin on mechanical and morphological properties of Kevlar composites in structural applications. Journal of Engineering and Sustainable Development, 22 (2 pt. 3). 1-Sep. ISSN 2520-0917

Sameen, Maher Ibrahim (2018) Modeling of road geometry and traffic accidents by hierarchical object-based and deep learning methods using laser scanning data. Doctoral thesis, Universiti Putra Malaysia.

Samin, Razali and Hao, N. C. and As'arry, Azizan and Md Rezali, Khairil Anas and Nuawi, Mohd Zaki (2018) Effect of disc brake squeal with respect to thickness variation: Experimental Modal Analysis. Journal of Mechanical Engineering, 6 (1 spec.). 33 - 44. ISSN 1823- 5514; ESSN: 2550-164X

Samsudin., S and A. Aziz, Nuraini (2018) Operation of reheat steam temperature control concept in sub critical boiler: operational review practices and methodology. International Journal of Engineering and Technology(UAE), 7 (4). 358 - 363.

Sayyed, M. I. and Narayana, Gandham Lakshmi and Moghaddasi, Majid and Kityk, I. V. and Mahdi, Mohd Adzir (2018) Physical properties, optical band gaps and radiation shielding parameters exploration for Dy³⁺-doped alkali/mixed alkali multicomponent borate glasses. Glass Physics and Chemistry, 44 (4). 279 - 291. ISSN 1087-6596; ESSN: 1608-313X

Senthilkumar, K. and Saba, N. and Rajini, N. and Chandrasekar, M. and Jawaid, M. and Siengchin, Suchart and Alotmane, Othman Y. (2018) Mechanical properties evaluation of sisal fibre reinforced polymer composites: a review. Construction and Building Materials, 174. 713 - 729. ISSN 0950-0618, ESSN: 1879-0526

Seperamaniam, Thandayuthapani and Abdul Jalil, Nawal Aswan and Zulkefli, Zamir Aimaduddin and As'arry, Azizan (2018) Hydrostatic bearing circular recess damping characteristic effectiveness on rotor vibration. In: Asia International Conference on Tribology 2018 (ASIATRIB 2018), 17-20 Sept. 2018, Kuching, Sarawak, Malaysia. (pp. 71-72).

Shaban, Suraya and Shafie, Suhaidi and Lokman, Muhammad Quisar and Ahmad, Fauzan (2018) Preparation of TiO2 photoanode on flexible ITO coated PET for dye sensitized solar cell. In: 2nd International Symposium on Advanced Materials and Nanotechnology (i-SAMN 2018), 15-16 Aug. 2018, The Everly Putrajaya, Malaysia. (pp. 88-89).

Shaban, Suraya and Shafie, Suhaidi and Sulaiman, Yusran and Ahmad, Fauzan and Lokman, Muhammad Quisar and Mohamed Sharif, Noor Fadzilah (2018) Flexible photoanode on titanium foil for back-illuminated dye sensitized solar cells. In: 13th IEEE International Conference on Semiconductor Electronics (ICSE2018), 15-17 Aug. 2018, Pullman Kuala Lumpur City Centre Hotel & Residence, Kuala Lumpur, Malaysia. (pp. 197-200).

Shafie, Suhaidi and Ab Kadir, Mohd Zainal Abidin and Azis, Norhafiz and Mohd Radzi, Mohd Amran and Wan Hasan, Wan Zuha and Mustafa, Mohd Amrallah (2018) High efficiency portable solar generator utilizing optimum solar panel orientation. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Shafie, Suhaidi and Misri, Nur Syaliana and Mustafa, Mohd Amrallah and Ahmad, Fauzan (2018) Investigation of TiO2/graphene nanocomposite based photoanode in dye-sensitized solar cell. Solid State Science and Technology, 26 (2). 129 - 133. ISSN 0127-9645

Shah, Khan Bahadur (2018) Multi road marking detection system for autonomous car using hybrid- based method. Masters thesis, Universiti Putra Malaysia.

Shaharum, Nur Shafira Nisa and Mohd Shafri, Helmi Zulhaidi and Gambo, Jibrin and Zainal Abidin, Fauzul Azim (2018) Mapping of Krau Wildlife Reserve (KWR) protected area using Landsat 8 and supervised classification algorithms. Remote Sensing Applications: Society and Environment, 10. 24 - 35. ISSN 2352-9385

Shaharuzaman, Mohd Adrinata and Salit, Mohd Sapuan and Mansor, Muhd Ridzuan and Mohamed Yusoff, Mohd Zuhri (2018) Passenger cars side door impact beam: a review. Journal of Engineering and Technology, 9 (1). pp. 1-22. ISSN 2180-3811; ESSN: 2289-814X

Shaharuzaman, Mohd Adrinata and Salit, Mohd Sapuan and Mansor, Muhd Ridzuan and Mohamed Yusoff, Mohd Zuhri (2018) Prioritizing the product design specification of side-door impact beam using analytic hierarchy process method. In: 5th Mechanical Engineering Research Day (MERD'18), 3 May 2018, Kampus Teknologi UTeM, Melaka. (pp. 34-35).

Shahbazpanahi, Shahriar and Hejazi, Farzad and Paknahad, Masoud and Rahimipour, Arash and Nasimi, Mohammad Reza (2018) Modelling crack propagation in RC beam-column joints. Tehnicki Vjesnik, 25 (4). 1183 - 1189. ISSN 1330-3651; ESSN: 1848-6339

Shahroze Ali, Rao Muhammad (2018) Effect of nanoclay and silica aerogel on mechanical, thermal and physical properties of sugar palm fibre- reinforced unsaturated polyester composites. Masters thesis, Universiti Putra Malaysia.

Shahroze Ali, Rao Muhammad and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Leman, Zulkiflle and Khan, Mohammad Asim and Muthukumar, Chandrasekar (2018) Effect of organo-modified nanoclay on the mechanical properties of sugar palm fiber-reinforced polyester composites. BioResources, 13 (4). 7430 - 7444. ISSN 1930-2126

Shaikh, Muhammad Umair and Ahmad, Siti Anom and Wan Adnan, Wan Azizun (2018) Investigation of data encryption algorithm for secured transmission of electrocardiograph (ECG) signal. In: 2018 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 3-6 Dec. 2018, Kuching, Sarawak, Malaysia. (pp. 274-278).

Shair, Ezreen Farina and Ahmad, Siti Anom and Abdullah, A. R. and Marhaban, Mohammad Hamiruce and Md Tamrin, Shamsul Bahri (2018) Selection of spectrogram's best window size in EMG signal during core lifting task. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-16). 81 - 85. ISSN 2180-1843; ESSN: 2289-8131

Shair, Ezreen Farina and Ahmad, Siti Anom and Abdullah, A. R. and Marhaban, Mohammad Hamiruce and Mohd Tamrin, Shamsul Bahri (2018) Determining best window size for an improved Gabor transform in EMG signal analysis. TELKOMNIKA (Telecommunication, Computing, Electronics and Control), 16 (4). 1650 - 1658. ISSN 1693-6930; ESSN: 2302-9293

Shair, Ezreen Farina and Ahmad, Siti Anom and Marhaban, Mohammad Hamiruce and Abdullah, Abdul Rahim and Mohd Tamrin, Shamsul Bahri (2018) Implementation of spectrogram for an improved EMG-based functional capacity evaluation's core-lifting task. In: 2018 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 3-6 Dec. 2018, Kuching, Sarawak, Malaysia. (pp. 13-17).

Shamshiri, Ramin and Weltzien, Cornelia and A. Hameed, Ibrahim and Yule, Ian J. and Grift, Tony E. and Balasundram, Siva Kumar and Pitonakova, Lenka and Ahmad, Desa and Chowdhary, Girish (2018) Research and development in agricultural robotics: a perspective of digital farming. International Journal of Agricultural and Biological Engineering, 11 (4). pp. 1-14. ISSN 1934-6344; ESSN: 1934-6352

Shamshiri, Redmond Ramin and Jones, James W. and Thorp, Kelly R. and Ahmad, Desa and Che Man, Hasfalina and Taheri, Sima (2018) Review of optimum temperature, humidity, and vapour pressure deficit for microclimate evaluation and control in greenhouse cultivation of tomato: a review. International Agrophysics, 32 (2). 287 - 302. ISSN 0236-8722

Shamsi, Suhaili and Elias, Nurhuda and Sarchio, Seri Narti Edayu and Md Yasin, Faizah (2018) Gallic acid loaded graphene oxide based nanoformulation (GAGO) as potential anti-bacterial agent against staphylococcus aureus. Materials Today: Proceedings, 5 (supp. 2). 160 - 165. ISSN 2214-7853

Sheh Omar, Nur Alia and Yap, Wing Fen and Abdullah, Jaafar and Anas, Nur Ain Asyiqin and Md Ramdzan, Nur Syahira and Mahdi, Mohd Adzir (2018) Optical and structural properties of cadmium sulphide quantum dots based thin ﬁlms as potential sensing material for dengue virus E-protein. Results in Physics, 11. 734 - 739. ISSN 2211-3797

Sheh Omar, Nur Alia and Yap, Wing Fen and Abdullah, Jaafar and Che Engku Chik, Che Engku Noramalina and Mahdi, Mohd Adzir (2018) Development of an optical sensor based on surface plasmon resonance phenomenon for diagnosis of dengue virus E-protein. Sensing and Bio-Sensing Research, 20. 16 - 21. ISSN 2214-1804

Sheh Omar, Nur Alia and Yap, Wing Fen and Abdullah, Jaafar and Mat Zaid, Mohd Hazani and Mahdi, Mohd Adzir (2018) Structural, optical and sensing properties of CdS-NH2GO thin film as a dengue virus E-protein sensing material. Optik, 171. 934 - 940. ISSN 0030-4026; ESSN: 1618-1336

Sheh Omar, Nur Alia and Yap, Wing Fen and Abdullah, Jaafar and Mustapha Kamil, Yasmin and Saleviter, Silvan and Mahdi, Mohd Adzir (2018) Development of cadmium sulfide quantum dots-polyamidoamine dendrimer thin films for detection of dengue virus E-protein antigens. In: 2nd International Symposium on Advanced Materials and Nanotechnology (i-SAMN 2018), 15-16 Aug. 2018, The Everly Putrajaya, Malaysia. (pp. 52-53).

Shojanoori, Razieh and Mohd Shafri, Helmi Zulhaidi and Mansor, Shattri and Ismail, Mohd Hasmadi (2018) Generic rule-sets for automated detection of urban tree species from very high-resolution satellite data. Geocarto International, 33 (4). 357 - 374. ISSN 1010-6049; ESSN: 1752-0762

Sibaruddin, Hairie Ilkham (2018) UAV-based extraction of topograhic and as-built information by object-based image analysis technique. Masters thesis, Universiti Putra Malaysia.

Sibaruddin, Hairie Ilkham and Mohd Shafri, Helmi Zulhaidi and Pradhan, Biswajeet and Haron, Nuzul Azam (2018) UAV-based approach to extract topographic and as-built information by utilising the OBIA technique. Journal of Geosciences and Geomatics, 6 (3). 103 - 123. ISSN 2373-6690; EISSN: 2373-6704

Songkhla, Thitima Na and Ismail, Mohd Halim Shah and Awang Biak, Dayang Radiah and Bolong, Jusang and S., Syafiie (2018) Safety behavior and incident experience of worker in gas stations of Suratthani Province, Thailand. Advanced Science Letters, 24 (1). 485 - 488. ISSN 1936-6612; ESSN: 1936-7317

Soon, Chu Yong and Tee, Yee Bond and Tan, Choon Hui and Abdul Talib, Rosnita and Abdan, Khalina (2018) Extraction and physicochemical characterization of chitin and chitosan from Zophobas morio larvae in varying sodium hydroxide concentration. International Journal of Biological Macromolecules, 108. 135 - 142. ISSN 0141-8130

Subri, Nur Nida Syamimi and Cormack, Peter A. G. and Md. Jamil, Siti Nurul Ain and Abdullah, Luqman Chuah and Daik, Rusli (2018) Synthesis of poly(acrylonitrile-co-divinylbenzene-co-vinylbenzyl chloride)-derived hypercrosslinked polymer microspheres and a preliminary evaluation of their potential for the solid-phase capture of pharmaceuticals. Journal of Applied Polymer Science, 135 (2). art. no. 45677. pp. 1-9. ISSN 0021-8995; ESSN: 1097-4628

Sukindar, Nor Aiman (2018) Development of printer nozzle for extruding synthetic biomaterials using fused deposition modeling process. Doctoral thesis, Universiti Putra Malaysia.

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2018) Effects of nozzle die angle on extruding polymethylmethacrylate in open-source 3D printing. Journal of Computational and Theoretical Nanoscience, 15 (2). 663 - 665. ISSN 1546-1955; ESSN: 1546-1963

Sukri, N. and Abd Hashib, Syafiza and Che Man, Hasfalina and Abdulsalam, M. (2018) Effect of maltodextrin concentration and slurry temperature on pineapple powder using ultrasonic spray dryer. Food Research, 2 (6). 582 - 586. ISSN 2550-2166

Sulaiman, Abdul Hadi and Abdullah, Fairuz and Ismail, Aiman and Jamaludin, Md Zaini and Md. Yusoff, Nelidya and Mahdi, Mohd Adzir (2018) Effect of PMF length to channel spacing tunability by temperature in multiwavelength fiber laser. In: 2nd International Conference on Telematics and Future Generation Networks (TAFGEN 2018), 24-26 July 2018, Kuching, Sarawak, Malaysia. (pp. 159-162).

Sulaiman, Abdul Hadi and Abdullah, Fairuz and Jamaludin, Md Zaini and Ismail, Aiman and Mahdi, Mohd Adzir (2018) SOA-based multiwavelength fiber laser assisted by intensity dependent transmission mechanism. In: 2018 IEEE Region 10 Conference (TENCON 2018), 28-31 Oct. 2018, Jeju, South Korea. (pp. 850-854).

Sulaiman, Safwan (2018) Covalent immobilization of α-CGTase on cellulose nanofiber derived from kenaf bast for enzymatic membrane reactor. Doctoral thesis, Universiti Putra Malaysia.

Sulaiman, Shamsuddin and Aldeehani, A. and Aziz, F. A. and Mustapha, F. (2018) Integrated halal supply chain system in food manufacturing industry. Journal of Industrial Engineering Research, 4 (3). pp. 1-5. ISSN 2077-4559

Sunday Ugochukwu, Azunna and Abd. Aziz, Fara Nora Aznieta and Abu Bakar, Nabilah and Mohd Nasir, Noor Azline (2018) Mechanical properties of concrete with coconut shell as partial replacement of aggregates. IOP Conference Series: Materials Science and Engineering, 431 (3). pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Syed Zainol Abidin, Shariffah Nur Jannah and Mamat @ Mat Nazir, Md Shuhazlly and Abdul Rashid, Suraya and Zainal, Zulkarnain and Sulaiman, Yusran (2018) Electropolymerization of poly(3,4-ethylenedioxythiophene) onto polyvinyl alcohol-graphene quantum dot-cobalt oxide nanofiber composite for high-performance supercapacitor. Electrochimica Acta, 261. 548 - 556. ISSN 0013-4686

Talib, Dayang Nurul Nahar and Shafie, Suhaidi and Aina Mardhiyah and Hamidon, Mohd Nizar and Ahmad, Fauzan (2018) Analysis of resistive type pressure sensors for static calibration. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Tan, Kai Jin (2018) Development of concentric semi-automated manipulator for assembly process. Doctoral thesis, Universiti Putra Malaysia.

Tang, Sai Hong and Tan, Chee Nian and Tan, Chee Fai and M., Azman and M., Mohd Rayme and A., Luqman (2018) A fault diagnosis expert system for building cooling tower. Journal of Mechanical Engineering, 5 (3). 233 - 247. ISSN 1823-5514; ESSN: 2550-164X

Tariq, Waqar and Othman, Mohammad Lutfi and Abdul Halin, Izhal and Hassim, Salihudin and Abdul Wahab, Noor Izzri (2018) Design and implementation challenges of energy saving projects in underdeveloped countries and their perspective solutions in the light of project management principles - a review. In: 2018 3rd International Conference on Emerging Trends in Engineering, Sciences and Technology (ICEEST), 21-22 Dec. 2018, Karachi, Pakistan. .

Tariq, Waqar and Othman, Mohammad Lutfi and Abdul Wahab, Noor Izzri and Akhtar, Shamim (2018) Smart monitoring and controlling of frequency deviation by using MATLAB GUI and ARDUINO DAQ card. Indonesian Journal of Electrical Engineering and Computer Science, 11 (1). 224 - 232. ISSN 2502-4752; ESSN: 2502-4760

Tay, Chai Hua (2018) Mechanical strength and thermal stability of woven glass/kenaf fibre hybrid-reinforced nanoclay with epoxy composites. Masters thesis, Universiti Putra Malaysia.

Temitope T., Dele-Afolabi and Mohamed Ariff, Azmah Hanim and Mazlan, Norkhairunnisa and Sobri, Shafreeza and Zahari, Nur Ismarrubie (2018) Significant effect of rice husk and sugarcane bagasse pore formers on the microstructure and mechanical properties of porous Al2O3/Ni composites. Journal of Alloys and Compounds, 743. 323 - 331. ISSN 0925-8388; ESSN: 1873-4669

Teo, Siow Hwa and Islam, Aminul and Ng, Chi Huey and Mansir, Nasar and Ma, Ting Li and Choong, Thomas Shean Yaw and Yap, Taufiq Yun Hin (2018) Methoxy-functionalized mesostructured stable carbon catalysts for effective biodiesel production from non-edible feedstock. Chemical Engineering Journal, 334. 1851 - 1868. ISSN 1385-8947

Tharwani, Intidhar Jabir Idan and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Md. Jamil, Siti Nurul Ain (2018) Equilibrium, kinetics and thermodynamic adsorption studies of acid dyes on adsorbent developed from kenaf core fiber. Adsorption Science and Technology, 36 (1-2). 694 - 712. ISSN 0263-6174; ESSN: 2048-4038

Theophilus, Dele-Afolabi Temitope (2018) Experimental and numerical investigation of plain and Ni-reinforced porous alumina ceramics composites produced with agro-waste pore formers. Doctoral thesis, Universiti Putra Malaysia.

Thien, Yee Von and Azis, Norhafiz and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Yunus, Robiah and Yaakub, Zaini (2018) Pre-breakdown streamer propagation and breakdown characteristics of refined bleached and deodorized palm oil under lightning impulse voltage. IEEE Transactions on Dielectrics and Electrical Insulation, 25 (5). 1614 - 1620. ISSN 1070-9878

Thien, Yee Von and Azis, Norhafiz and Jasni, Jasronita and Yunus, Robiah and Ab Kadir, Mohd Zainal Abidin and Yaakub, Zaini (2018) Influence of electrode geometry on the lightning impulse breakdown voltage of palm oil. In: 10th IEEE PES Asia-Pacific Power and Energy Engineering Conference 2018 (APPEEC), 7-10 Oct. 2018, Kota Kinabalu, Sabah, Malaysia. (pp. 317-320).

Thiruvenkadam, Selvakumar and Siajam, Shamsul Izhar and Hiroyuki, Yoshida and Harun, Mohd Razif (2018) Subcritical water extraction of Chlorella pyrenoidosa: optimization through response surface methodology. BioMed Research International, 16 (2). art. no. 1931634. pp. 1-16. ISSN 2314-6133; ESSN: 2314-6141

Tijjani, Yusuf (2018) Mechanical and thermal properties of CNT-reinforced quartzite nano-composite for furnace lining. Doctoral thesis, Universiti Putra Malaysia.

Tijjani, Yusuf and Mohd Yasin, Faizah and Ismail, Mohd Halim S. and Mohamed Ariff, Azmah Hanim (2018) Manufacturing and mechanical characterization of multiwalled carbon nanotubes/quartz nanocomposite. JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 126 (12). 984 - 991. ISSN 1882-0743

Tuan Abdul Rahman, Tuan Ahmad Zahidi and As'arry, Azizan and Abdul Jalil, Nawal Aswan and Raja Ahmad, Raja Mohd Kamil (2018) Training feedforward neural networks for fault diagnosis of ball bearing. In: 5th Mechanical Engineering Research Day (MERD'18), 3 May 2018, Kampus Teknologi UTeM, Melaka. (pp. 290-292).

Tuan Yusof, Tuan Norizan (2018) Effects of temperature and relative humidity on growth of green leafhopper (Nephotettix virescens distant). Masters thesis, Universiti Putra Malaysia.

Umair, Muhammad and Azis, Norhafiz and Halis, Rasmina and Jasni, Jasronita (2018) Investigation on the effect of beating on the physical and mechanical properties of untreated kenaf based insulation paper. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Varatharajoo, Renuganth and Chak, Yew Chung (2018) A parallel distributed compensation approach to fuzzy control of spacecraft combined attitude and sun tracking. International Journal of Engineering and Technology (UAE), 7 (4.13). 28 - 32. ISSN 2227-524X

Veerasamy, Veerapandiyan and Abdul Wahab, Noor Izzri and Ramachandran, Rajeswari and Mansoor, Muhammad and Thirumeni, Mariammal (2018) High impedance fault detection in medium voltage distribution network using discrete wavelet transform and adaptive neuro-fuzzy inference system. Energies, 11 (12). 1(24)-24(24). ISSN 1996-1073

Wae Abdulkadir Usin, Wan Aisyah Fadilah (2018) Evaluation of characteristics and performance of fabricated polysulfone/cellulose acetate ultrafiltration membrane. Masters thesis, Universiti Putra Malaysia.

Wae Abdulkadir Usin, Wan Aisyah Fadilah and Md. Yunos, Khairul Faezah and Hassan, Abdul Rahman and Mohd. Amin, Nor Amaiza (2018) Fabrication and performance of PSf/CA blend ultrafiltration membrane on effect of different polymer ratio. Journal of Advanced Research in Materials Science, 45 (1). pp. 1-14. ISSN 2289-7992

Wagiran, Rahman and Farahani, Hamid and Yurchenko, Olena and Urban, Gerald A. (2018) Barium strontium titanate humidity sensor: impact of doping on the structural and electrical properties. Proceedings, 2 (13). art. no. 1007. pp. 1-5. ISSN 2504-3900

Wan Ab Karim Ghani, Wan Azlina and Alias, Azil Bahari and Ahmad, Nurul Farhana and Talib, Norhayati and Abd Rashid, Zulkafli (2018) Characteristics of rice husk biochar blended with coal fly ash for potential sorption material. Malaysian Journal of Analytical Sciences, 22 (2). 326 - 332. ISSN 1394-2506

Wan Ab Karim Ghani, Wan Azlina and Choong, Thomas Shean Yaw and Rashid, Umer and Madzaki, Hazimah and Muda, Noraziah (2018) Carbon dioxide adsorption on activated carbon hydrothermally treated and impregnated with metal oxides. Jurnal Kejuruteraan, 30 (1). 31 - 38. ISSN 0128-0198

Wan Ab Karim Ghani, Wan Azlina and Silas, Kiman and Choong, Thomas Shean Yaw and Rashid, Umer (2018) Breakthrough studies of Co₃O₄ supported activated carbon monolith for simultaneous SO₂/NOx removal from flue gas. Fuel Processing Technology, 180. 155 - 165. ISSN 0378-3820

Wan Ahamad, Wan Mohd Aznan and Mohd Yusuff, R. and Abdul Aziz, F. and Mat, Z. (2018) Effect of particle size and moisture content onbulk density of rice husk pellet as bioenergy. In: National Conference on Agricultural and Food Mechanization 2018 (NCAFM 2018), 17-19 Apr. 2018, Pullman Kuching, Sarawak. (pp. 56-58).

Wan Ahmad, Wan Fatinhamamah and Azhari, Muhammad Syahmi and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima (2018) Portable natural enhancement material resistivity meter : a prototype. In: 2018 IEEE 7th International Conference on Power and Energy (PECon), 3-4 Dec. 2018, Berjaya Times Square Hotel, Kuala Lumpur, Malaysia. (pp. 96-101).

Wan Ahmad, Wan Fatinhamamah and Hamzah, Nurul Haziqah and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima (2018) A study on bentonite and kenaf properties for grounding purposes. In: 34th International Conference on Lightning Protection (ICLP 2018), 2-7 Sept. 2018, Rzeszow, Poland. .

Wan Ahmad, Wan Fatinhamamah and Lai, Wai Luen and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin (2018) Variations of soil resistivity values due to grounding system installations with natural enhancement material mixtures. In: 34th International Conference on Lightning Protection (ICLP 2018), 2-7 Sept. 2018, Rzeszow, Poland. .

Wan Ahmad, Wan Fatinhamamah and Voon, Yong Jian and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima (2018) Performance of bentonite, fly ash and wood ash mixtures as grounding enhancement materials. In: 2018 IEEE 7th International Conference on Power and Energy (PECon), 3-4 Dec. 2018, Berjaya Times Square Hotel, Kuala Lumpur, Malaysia. (pp. 203-208).

Wan Azman, Wan Mohd Fariz and Shamsudin, Rosnah and Hamzah, Azman and Azizan, Mohd Shahrir and Azizan, Saiful Azwan and Shahar, Asnawi and Mohd Shafie, Zainun (2018) Effect of grater position on the size of grated sago (Metroxylon spp.). Food Research, 2 (6). pp. 572-577. ISSN 2550-2166

Wan Azman, Wan Mohd Fariz and Shamsudin, Rosnah and Hamzah, Azman and Azizan, Mohd Shahrir and Azizan, Saiful Azwan and Shahar, Asnawi and Rahim, Afiqah Aina and Mhd Adnan, Amir Syariffuddeen and Hasbullah, Hasmin Hakim and Hashim, Ishak and Sairi, Masniza and Abdul Wahid, Ruwaida and Mohd Ramli, Sharifah Hafiza and Sahari, Yahya and Mohd Shafie, Zainun and Shamsulkamal, Amir Redzuan and Abdul Karim, Faewati and Johari, Mohammad Shukri and Sani, Mohd Azmirredzuan and Mohd Amin Tawakkal, Mohd Hafiz and Zainol Abidin, Mohd Zaimi and Jamaluddin, Muhammad Aliq and Alwi, Sha'fie (2018) Study of machines performance in producing different sizes of grated sago. In: National Conference on Agricultural and Food Mechanization 2018 (NCAFM 2018), 17-19 Apr. 2018, Pullman Kuching, Sarawak. (pp. 211-213).

Wan Hasan, Wan Zuha and Bashi, Omar Ibrahim Dallal and Shafie, Suhaidi and Azis, Norhafiz and Wagatsuma, Hiroaki (2018) Autonomous quadcopter altitude for measuring risky gases in hazard area. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-5). 31 - 34. ISSN 2289-8131; ESSN: 2180-1843

Warid, Warid and Hizam, Hashim and Mariun, Norman and Abdul Wahab, Noor Izzri (2018) A novel quasi-oppositional modified Jaya algorithm for multi-objective optimal power flow solution. Applied Soft Computing Journal, 65. 360 - 373. ISSN 1568-4946

Wiriadidjaja, Surjatin and Zhahir, Amzari and Mohamad, Zahratu Hilall and Razali, Shikin and Pua'at, Ahmad Afifi and Ahmad, Mohamed Tarmizi (2018) Wing-in-ground-effect craft: a case study in aerodynamics. International Journal of Engineering and Technology(UAE), 7 (4.13). 5-Sep. ISSN 2227-524X

Wondi, Mohd Hafizz and Shamsudin, Rosnah and Yunus, Robiah (2018) Colour identification of sterilized and unsterilized oil palm fruitlet mesocarp. In: Joint Symposium of the 8th International Agriculture Congress 2018 and 6th International Symposium for Food & Agriculture 2018 (8th IAC – 6th ISFA 2018), 13-15 Nov. 2018, Auditorium Rashdan Baba, TNCPI Building, Universiti Putra Malaysia. (pp. 137-140).

Woon, Kai Siong (2018) Development of high damping rubber joint for precast beam-column connection under cyclic loads. Doctoral thesis, Universiti Putra Malaysia.

Y. H., Mugahed Amran and Alyousef, Rayed and Muhammad Rashid, Raizal Saifulnaz and H., Alabduljabbar and Hung, Chung Chan (2018) Properties and applications of FRP in strengthening RC structures: a review. Structures, 16. 208 - 238. ISSN 2352-0124

Yaacob, Mohammad Effendy and Mohamad, U. (2018) Development of a retractable tray dryer for drying crops in solar PV farms. Food Research, 2 (6). 578 - 581. ISSN 2550-2166

Yaakob, Mohd Yuhazri and Wan Yaacob, Wan Nur Hidayah and Sihombing, Haeryip and Yahaya, Saifudin Hafiz and Sulaiman, Shamsuddin and Amir Mohamed, Kamarul (2018) Kansei engineering approach for the customers preferences of car design. In: 7th International Conference on Kansei Engineering and Emotion Research 2018 (KEER 2018), 19-22 Mar. 2018, Kuching, Sarawak, Malaysia. (pp. 289-295).

Yahaya, Muhammad Sharil and Azis, Norhafiz and Mohd Selva, Amran and Ab Kadir, Mohd Zainal Abidin and Jasni, Jasronita and Hairi, Mohd Hendra and Yang Ghazali, Young Zaidey and Talib, Mohd Aizam (2018) Effect of pre-determined maintenance repair rates on the Health Index state distribution and performance condition curve based on Markov Prediction Model for sustainable transformers asset management strategies. Sustainability, 10 (10). pp. 1-13. ISSN 2071-1050

Yahaya, Muhammad Sharil and Azis, Norhafiz and Mohd Selva, Amran and Ab Kadir, Mohd Zainal Abidin and Jasni, Jasronita and Hairi, Mohd Hendra and Yang Ghazali, Young Zaidey and Talib, Mohd Aizam (2018) Effect of pre-determined maintenance repair rates on the health index state distribution and performance condition curve based on the Markov prediction model for sustainable transformers asset management strategies. Sustainability, 10 (10). art. no. 3399. pp. 1-13. ISSN 2071-1050

Yahaya, Muhammad Sharil and Azis, Norhafiz and Mohd Selva, Amran and Ab Kadir, Mohd Zainal Abidin and Jasni, Jasronita and Kadim, Emran Jawad and Hairi, Mohd Hendra and Yang Ghazali, Young Zaidey (2018) A maintenance cost study of transformers based on Markov model utilizing frequency of transition approach. Energies, 11 (8). art. no. 2006. pp. 1-14. ISSN 1996-1073

Yahaya, Ridwan and Salit, Mohd Sapuan and Mohammad, Jawaid and Leman, Zulkiflle and Zainudin, Edi Syams (2018) Review of kenaf reinforced hybrid biocomposites: potential for defence applications. Current Analytical Chemistry, 14 (3). 226 - 240. ISSN 1573-4110; EISSN: 1875-6727

Yahya, Nor Affendy and Varatharajoo, Renuganth and Mohd Harithuddin, Ahmad Salahuddin and Md Ali, Syaril Azrad (2018) Performance measure of satellite flying in coplanar and non-coplanar formation. International Journal of Engineering and Technology (UAE), 7 (4.13). 66 - 70. ISSN 2227-524X

Yamin, Muhammad (2018) Development of a prototype variable rate liquid fertilizer applicator for mature oil palm trees. Doctoral thesis, Universiti Putra Malaysia.

Yap, Hoon and Mohd Radzi, Mohd Amran and Hassan, Mohd Khair and Mailah, Nashiren Farzilah (2018) Operation of three-level inverter-based shunt active power filter under nonideal grid voltage conditions with dual fundamental component extraction. IEEE Transactions on Power Electronics, 33 (9). 7558 - 7570. ISSN 0885-8993; ESSN: 1941-0107

Yapp, Jong Heng (2018) Reactive hyperemia response and ultrasonographic features in determining tissue recovery in rats. Doctoral thesis, Universiti Putra Malaysia.

Yusefi, Mostafa and Khalid, Mohammad and Md Yasin, Faizah and Abdullah, Luqman Chuah and Ketabchi, Mohammad Reza and Walvekar, Rashmi Gangasa (2018) Performance of cow dung reinforced biodegradable poly (lactic acid) biocomposites for structural applications. Journal of Polymers and the Environment, 26 (2). 474 - 486. ISSN 1566-2543; ESSN: 1572-8900

Yusof, Nor Farhani (2018) Evaluation of geological formation for potential groundwater aquifer by integrated geophysical techniques. Masters thesis, Universiti Putra Malaysia.

Yusoff, Mohd Shahrizan (2018) Synergistic model development for lean manufacturing implementation at small and medium enterprises in Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Yusuf, Siti Idzura and Abdul Majid, Hasmayadi and Musa, Rohana and Mohd Sidek, Roslina and Abdul Halin, Izhal and Shafie, Suhaidi (2018) Input range driver for measurement of a differential 10 bit SAR ADC. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2018), 28-30 Nov. 2018, Songkla, Thailand. .

Zahid, Rehan and Hassan, Masjuki and Alabdulkarem, Abdullah and Varman, Mahendra and Kalam, Md. Abul and Mufti, Riaz Ahmad and Mohd Zulkifli, Nurin Wahidah and Gulzar, Mubashir and Bhutta, Muhammad Usman and Ali, Mian Ashfaq and Yunus, Robiah (2018) Tribological characteristics comparison of formulated palm trimethylolpropane ester and polyalphaolefin for cam/tappet interface of direct acting valve train system. Industrial Lubrication and Tribology, 70 (5). 888 - 901. ISSN 0036-8792

Zainal Abidin, Ahmad Noor Syukri and Abdul Jalil, Nawal Aswan and Wong, Shaw Voon (2018) Crash and injury characteristics of riders in motorcycle-passenger vehicle crashes. World Academy of Science, Engineering and Technology International Journal of Urban and Civil Engineering, 12 (1). pp. 5-12. ISSN 1307-6892

Zainal Abidin, Ahmad Noor Syukri and Abdul Jalil, Nurul Shahirah and Wong, Shaw Voon and Tan, C. Y. (2018) Evaluating risk factors in motorcycle-passenger car crashes through real-world investigation. Journal of the Society of Automotive Engineers Malaysia, 2 (1). 92 - 105. ISSN 2550-2239

Zainal Abidin, Zamri and Hashim, Shaiful Jahari and Lim, Yang Wei and Chen, Zhong and Rosli, Zulfazli (2018) Radio astronomy interferometer network testing for a Malaysia-China real-time e-VLBI. Indian Journal of Physics, 92 (1). 1-Jun. ISSN 0019-5480; ESSN: 0974-9845

Zaini, Nur Hazirah and Ab Kadir, Mohd Zainal Abidin and Mohd Radzi, Mohd Amran and Izadi, Mahdi and Ahmad, Nor Izzati and Azis, Norhafiz and Mohd Nasir, Mohd Solehin (2018) On the effect of surge protection devices (SPDs) placement for grid-connected solar PV farm. In: 34th International Conference on Lightning Protection (ICLP 2018), 2-7 Sept. 2018, Rzeszow, Poland. .

Zainol Abidin, N. H. H. and Saadon, Syamimi and Abu Talib, Abd Rahim (2018) Parametric optimization and performance analysis of a waste heat recovery system using Organic Rankine Cycle (ORC). In: AEROTECH VII - Sustainability in Aerospace Engineering and Technology, 7 - 8 Aug. 2018, Putrajaya, Malaysia. (pp. 1-10).

Zainol Abidin, Nadiah Husseini and Abu Bakar, Muhammad Hafiz and Tamchek, Nizam and Mahamd Adikan, Faisal Rafiq and Mahdi, Mohd Adzir (2018) Pump distribution effect in dual-wavelength Raman-erbium random distributed feedback fiber laser. Optics Express, 26 (12). 15411 - 15419. ISSN 1094-4087

Zainuddin, Nurul Hida and Chee, Hui Yee and Ahmad, Muhammad Zamharir and Mahdi, Mohd Adzir and Abu Bakar, Muhammad Hafiz and Yaacob, Mohd Hanif (2018) Sensitive leptospira DNA detection using tapered optical fiber sensor. Journal of Biophotonics, 11 (8). art. no. 201700363. pp. 1-12. ISSN 1864-063X; ESSN: 1864-0648

Zainuddin, Nurul Hida and Yap, Wing Fen and Alwahib, Ali Abdulkhaleq Abdulhadi and Yaacob, Mohd Hanif and Sheh Omar, Nur Alia and Mahdi, Mohd Adzir (2018) Detection of adulterated honey by surface plasmon resonance optical sensor. OPTIK, 168. 134 - 139. ISSN 0030-4026; ESSN: 1618-1336

Zainuddin, Suraya and Ibrahim, Idnin Pasya and Abdul Rashid, Nur Emileen and Raja Abdullah, Raja Syamsul Azmir and Abdullah, Abdul Rahman (2018) Performance of MIMO FMCW radar in detecting small vessels. In: 2018 IEEE International RF and Microwave Conference (RFM 2018), 17-19 Dec. 2018, Penang, Malaysia. (pp. 329-332).

Zainudin, Afiq Azri and Yap, Wing Fen and Yusof, Nor Azah and Al-Rekabi, Sura Hmoud and Mahdi, Mohd Adzir and Sheh Omar, Nur Alia (2018) Incorporation of surface plasmon resonance with novel valinomycin doped chitosan-graphene oxide thin film for sensing potassium ion. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 191. 111 - 115. ISSN 1386-1425; ESSN: 1873-3557

Zainudin, Edi Syams and Salit, Mohd Sapuan and Azaman, M.D. and Arifin, A.M.T. (2018) Introduction to Natural Fiber Reinforced Vinyl Ester and Vinyl Polymer Composites. In: Natural Fiber Reinforced Vinyl Ester and Vinyl Polymer Composites. Development, Characterization and Applications. Woodhead Publishing, UNITED_KINGDOM, Jan-45. ISBN 9780081021613

Zakaria, Ahmad Hafizuddin and Mohd Salleh, Mohamad Amran and Ismail, Mohd Halim Shah and Abdul Aziz, Mustafa Kamal (2018) Separation of palm mesocarp fiber and nut by air classifier using air disturbance system. In: 2nd International Symposium on Advanced Materials and Nanotechnology (i-SAMN 2018), 15-16 Aug. 2018, The Everly Putrajaya, Malaysia. (pp. 60-61).

Zakaria, Mohamad Shukri (2018) Development of non-boundary-fitted Cartesian grid method for numerical simulation of mechanical heart valve and the potential for blood clotting. Doctoral thesis, Universiti Putra Malaysia.

Zakaria, Mohamad Shukri and Abdullah, Haslina and Ahmad, Kamarul Arifin (2018) Fluid structure interaction simulation of large deformation and added-mass effect using OpenFOAM. In: 5th Mechanical Engineering Research Day (MERD'18), 3 May 2018, Kampus Teknologi UTeM, Melaka. (pp. 79-80).

Zakaria, Mohamad Shukri and Ismail, Farzad and Tamagawa, Masaaki and Abdul Aziz, Ahmad Fazli and Wiriadidjaja, Surjatin and Basri, Adi Azrif and Ahmad, Kamarul Arifin (2018) Computational fluid dynamics study of blood flow in aorta using OpenFOAM. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 43 (1). pp. 81-89. ISSN 2289-7879

Zayer, Iman Ahmed and Aris, Ishak and Marhaban, Mohammad Hamiruce and Ishak, Asnor Juraiza (2018) Bipedal humanoid robot. Pertanika Journal of Scholarly Research Reviews, 4 (3). pp. 42-61. ISSN 2462-2028

Zerin, Ipshita (2018) Design and fabrication of a new converter system for pre-heating vehicle catalytic converter (Not for loan). Masters thesis, Universiti Putra Malaysia.

Zin, Mohd Hanafee and Abdan, Khalina and Norizan, Mohd Nurazzi and Mazlan, Norkhairunnisa (2018) The effects of alkali treatment on the mechanical and chemical properties of banana fibre and adhesion to epoxy resin. Pertanika Journal of Science & Technology, 26 (1). pp. 161-176. ISSN 0128-7680; ESSN: 2231-8526

Zolfaghari, Reza (2018) Cationic surfactants for demulsification of produced water from alkaline-surfactant-polymer flooding (Not for loan). Doctoral thesis, Universiti Putra Malaysia.

Zuikafly, Siti Nur Fatin and Khalifa, Ali and Ahmad, Fauzan and Shafie, Suhaidi and Harun, Sulaiman Wadi (2018) Conductive graphene as passive saturable absorber with high instantaneous peak power and pulse energy in Q-switched regime. Results in Physics, 9. 371 - 375. ISSN 2211-3797

This list was generated on Fri Nov 22 08:12:36 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0