Items where Division is "Faculty of Engineering" and Year is 2010

Group by: Creators | Item Type | No Grouping

Number of items: 593.

Article

A. ElSheikh, R. F. and Ahmad, Nordin and Mohamed Shariff, Abd Rashid and Balasundram, Siva K. and Yahaya, S. (2010) An agricultural investment map based on geographic information system and multi-criteria method. Journal of Applied Sciences, 10 (15). pp. 1596-1602. ISSN 1812-5654; ESSN: 1812-5662

A. Perumal, Puvanasvaran and Megat Ahmad, Megat Mohamad Hamdan and Tang, Sai Hong and Muhamad, Mohd Razali and Hamouda, Abdel Magid Salem (2010) Lean process management implementation through enhanced problem solving capabilities. Journal of Industrial Engineering and Management, 3 (3). pp. 447-493. ISSN 2013-8423; ESSN: 2013-0953

Ab Kadir, Mohd Zainal Abidin and Hizam, Hashim and Jasni, Jasronita and Mariun, Norman and Khairudin, Azhar (2010) Enhancement in Static Security Assessment for a Power System Using an Optimal Artificial Neural Network. International Review of Electrical Engineering, 5 (3). pp. 1095-1102. ISSN 1827-6660

Ab Kadir, Mohd Zainal Abidin and Cotton, Ian (2010) Application of the insulator coordination gap models and effect of line design to backflashover studies. International Journal of Electrical Power and Energy Systems, 32 (5). pp. 443-449. ISSN 0142-0615; ESSN: 1879-3517

Ab Kadir, Mohd Zainal Abidin and Mohd Nawi, Zawati and Sardi, Junainah (2010) Numerical Modeling And Simulation In Electromagnetic Transient Program For Estimating Line Backflashover Performance. IAENG-Engineering Letters, 18 (4). pp. 351-356. ISSN 1816-093X

Ab Kadir, Mohd Zainal Abidin and Mohd Nowi, Zawati and Misbah, Nor Ratna (2010) A Critical Review on the Contamination Effect on Distribution Overhead Lines. International Review of Electrical Engineering, 5 (5). pp. 2461-2470. ISSN 1827-6660

Ab. Aziz, Norashikin (2010) Continuous Flow Experimental Set-Up for Fouling Deposit Study. World Academy of Science, Engineering and Technology, 68. pp. 1312-1315.

Ab. Rashdi, Abdalla A. and Salit, Mohd Sapuan and Abdan, Khalina and Megat Ahmad, Megat Mohamad Hamdan (2010) The effects of weathering on mechanical properties of kenaf unsaturated polyester composites (KFUPC). Polymers and Polymer Composites, 18 (6). pp. 337-343. ISSN 0967-3911; ESSN: 1478-2391

Ab. Rashdi, Abdalla A. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Abdan, Khalina (2010) Combined effects of water absorption due to water immersion, soil buried and natural weather on mechanical properties of kenaf fibre unsaturated polyester composites (KFUPC). International Journal of Mechanical and Materials Engineering, 5 (1). pp. 11-17. ISSN 1823-0334

Abang Zaidel, Dayang Norulfairuz and Chin, Nyuk Ling and Yusof, Yus Aniza (2010) A review on rheological properties and measurements of dough and gluten. Journal of Applied Sciences, 10 (20). pp. 2478-2490. ISSN 1812-5654; ESSN: 1812-5662

Abd Aziz, Samsuzana and Steward, Brian L. and Karkee, Manoj (2010) Using spatial uncertainty of prior measurements to design adaptive sampling of elevation data. Transactions of the ASABE, 53 (2). pp. 349-357. ISSN 2151-0032; ESSN: 2151-0040

Abd Hamid, Hamidah and Yunus, Robiah and Choong, Thomas Shean Yaw (2010) Utilization of MATLAB to Simulate Kinetics of Transesterification of Palm Oil-Based Methyl Esters with Trimethylolpropane for Biodegradable Synthetic Lubricant Synthesis. Chemical Product and Process Modeling, 5 (1). ISSN 1934-2659

Abd Rahim, Nasrudin and Mohd Radzi, Mohd Amran (2010) DSP-based flexible digital hysteresis in switched capacitor active power filter. IEICE Electronics Express, 7 (9). pp. 621-627. ISSN 1349-2543

Abd Rahman, Nur 'Aliaa and Mustapa Kamal, Siti Mazlina and Taip, Farah Saleena (2010) Impact of commercial pectolytic enzymes on selected properties of white dragon fruit juice. Journal of the Institution of Engineers, Malaysia, 71 (4). pp. 25-31. ISSN 0126-513X

Abd Rahman, Nur 'Aliaa and Mustapa Kamal, Siti Mazlina and Taip, Farah Saleena and Abdullah, Abdul Ghani Liew (2010) Response Surface Optimization for Clarification of White Pitaya Juice Using a Commercial Enzyme. Journal of Food Process Engineering, 33 (2). pp. 333-347. ISSN 0145-8876

Abd. Rahman, Mohamed and Salit, Mohd Sapuan and Mridha, Shahjahan and Abdan, Khalina (2010) Effects of simple abrasive combing and pretreatments on the properties of pineapple leaf fibers (PALF) and PALF-vinyl ester composite adhesion. Polymer-Plastics Technology and Engineering, 49 (10). pp. 972-978. ISSN 0360-2559; ESSN: 1525-6111

Abd. Wafti, Nur Sulihatimarsyila and Cheah, Kien Yoo and Chuah, Teong Guan and Siew, Wai Lin and Choong, Thomas Shean Yaw (2010) Deoiling and regeneration efficiencies of spent bleaching clay. American Journal of Applied Sciences, 7 (3). pp. 434-437. ISSN 1546-9239; ESSN: 1554-3641

Abdol Rahman, Mohd Nasrull and Abdul Aziz, Faieza and Mohd Yusuff, Rosnah (2010) Survey of body part symptoms among workers in a car tyre service centre. Journal of Human Ergology, 39 (1). pp. 53-56. ISSN 0300-8134; ESSN: 1884-3964

Abdolshah, Mohammad and Mohd Yusuff, Rosnah and Ismail, Yusof and Tang, Sai Hong (2010) A new asymmetric bounded loss-based process capability index. World Applied Sciences Journal, 11 (7). pp. 885-892. ISSN 1818-4952; ESSN: 1991-6426

Abdul Kadir @ Jaafar, Muhammad Zamzuri and Al-Mansoori, Mohammed Hayder and Md. Samsuri, Norhakimah and Mahdi, Mohd Adzir (2010) Contribution of Rayleigh scattering on Brillouin comb line generation in Raman fiber laser. Applied Optics, 49 (18). pp. 3506-3510. ISSN 1559-128X; ESSN: 2155-3165

Abdul Karim, Hezerul and Mohamad Anil Shah, Nurul Syazrina and Mohd Arif, Nor Azhar and Sali, Aduwati and Worrall, S. (2010) Reduced resolution depth coding for stereoscopic 3D video. IEEE Transactions on Consumer Electronics, 56 (3). pp. 1705-1712. ISSN 0098-3063; ESSN: 1558-4127

Abdul Malik Thanoon, Huda and Jaafar, Mohd Saleh and Noorzaei, Jamaloddin and Abdul Malik Thanoon, Waleed and Mohammed, Thamer Ahmed (2010) Modelling the effects of sediment on the seismic behaviour of Kinta roller compacted concrete dam. Pertanika Journal of Science & Technology, 18 (1). pp. 43-59. ISSN 0128-7680; ESSN: 2231-8526

Abdul Rahman, Ribhan Zafira and Che Soh, Azura and Muhammad, Noor Fadzlina (2010) Fault detection and diagnosis for continuous stirred tank reactor using neural network. Kathmandu University Journal of Science, Engineering and Technology, 6 (2). pp. 66-74. ISSN 1816-8752

Abdul Rashid, Suraya and Mohd Salleh, Mohamad Amran and Abd. Aziz, Farah Nora Aznieta and Naji Givi, Alireza (2010) Particle size effect on the permeability properties of nano-SiO2 blended Portland cement concrete. Journal of Composite Materials, 45 (11). pp. 1173-1180. ISSN 0021-9983

Abdul Wahab, Noor Izzri and Mohamed, Azah (2010) Transient stability emergency control using generator tripping based on tracking area-based rotor angle combined with UFLS. International Review of Electrical Engineering, 5 (5). pp. 2317-2326. ISSN 1827-6660

Abdullah, Luqman Chuah and Muhammad, and Jamari, Saidatul Shima and Choong, Thomas Shean Yaw (2010) Modelling of single and binary adsorptions of heavy metals onto activated carbon - equilibrium studies. Pertanika Journal of Science & Technology, 18 (1). pp. 83-93. ISSN 0128-7680; ESSN: 2231-8526

Abdullah, Mohammad Nizam Filipski and Varatharajoo, Renuganth (2010) Evaluation of a spacecraft attitude and rate estimation algorithm. Aircraft Engineering and Aerospace Technology, 82 (3). pp. 184-193. ISSN 1748-8842; ESSN: 1758-4213

Abdullah, Nadia and Abu Talib, Abd. Rahim and Jaafar, Abdul Aziz and Mohd Salleh, Mohamad Amran and Chong, Wen Tong (2010) The basics and issues of Thermochromic Liquid Crystal Calibrations. Experimental Thermal and Fluid Science, 34 (8). pp. 1089-1121. ISSN 0894-1777; ESSN: 1879-2286

Abdullah, Norazlin and Chin, Nyuk Ling (2010) Simplex-centroid mixture formulation for optimised composting of kitchen waste. Bioresource Technology, 101 (21). pp. 8205-8210. ISSN 0960-8524

Abdulrazeg, Aeid Ali and Noorzaei, Jamaloddin and Khanehzaei, Parvin and Jaafar, Mohd Saleh and Mohammed, Thamer Ahmed (2010) Effect of temperature and creep on roller compacted concrete dam during the construction stages. Computer Modeling in Engineering & Sciences, 68 (3). pp. 239-268. ISSN 1526-1492; ESSN: 1526-1506

Abdur Rahman, Mohamed and Salit, Mohd Sapuan and Abdan, Khalina (2010) Selected properties of hand-laid and compression molded vinyl ester and pineapple leaf fiber (PALF)-reinforced vinyl ester composites. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 68-73. ISSN 1823-0334

Abu Talib, Abdul Rahim and Ali, Aidy and Badie, Mohamed A. and Che Lah, Nur Azida and Golestaneh, Amirreza Fahim (2010) Developing a hybrid, carbon/glass fiber-reinforced, epoxy composite automotive drive shaft. Materials and Design, 31 (1). pp. 514-521. ISSN 0264-1275

Abu Talib, Abdul Rahim and Ali, Aidy and Hamdan, Gehad Goudah Soliman Mosleh and Che Lah, Nur Azida and Golestaneh, Amirreza Fahim (2010) Developing a composite based elliptic spring for automotive applications. Materials and Design, 31 (1). pp. 475-484. ISSN 0261-3069

Abubakar, Mohammed Shu'aibu and Ahmad, Desa (2010) Pattern of Energy Consumption in Millet Production for Selected Farms in Jigawa, Nigeria. Australian Journal of Basic and Applied Sciences, 4 (4). pp. 665-672. ISSN 1991-8178

Abubakar, Mohammed Shu'aibu and Ahmad, Desa and Akande, Fatai Bukola (2010) A review of farm tractor overturning accidents and safety. Pertanika Journal of Science & Technology, 18 (2). pp. 377-385. ISSN 0128-7680; ESSN: 2231-8526

Abubakar, Mohammed Shu'aibu and Ahmad, Desa and Othman, Jamarei and Sulaiman, Shamsudin (2010) Mechanical Properties of Paddy Soil in Relation to High Clearance Vehicle Mobility. Australian Journal of Basic and Applied Sciences, 4 (5). pp. 906-913. ISSN 1991-8178

Abubakar, Mohammed Shu'aibu and Umar, B. and Ahmad, Desa (2010) Energy Use Patterns in Sugar Production: A case study of Savannah Sugar Company, Numan, Adamawa State, Nigeria. Journal of Applied Sciences Research, 6 (4). pp. 377-382. ISSN 1816-157X

Abubakar, Mohammed Shu'aibu and Umar, Bobboi and Ahmad, Desa (2010) Energy use patterns in tomato paste production: a case study of savannah integrated farms limited, Dadin-kowa, Gombe State, Nigeria. International Journal of Engineering and Technology, 10 (1). pp. 14-18. ISSN 2227-2712; ESSN: 2077-1185

Afshari, Ali Reza and Mojahed, Majid and Mohd Yusuff, Rosnah and Tang, Sai Hong and Ismail, Md. Yusof (2010) Personnel selection using ELECTRE. Journal of Applied Sciences, 10 (23). 3068 - 3075. ISSN 1812-5654; ESSN: 1812-5662

Ahmad, Desa and Abubakar, Mohammed Shu'aibu (2010) Utilization of and Constraints on Animal Traction in Jigawa State, Nigeria. Australian Journal of Basic and Applied Sciences, 4 (6). pp. 1152-1156. ISSN 1991-8178

Ahmad Anas, Siti Bariah and Quinlan, Terence J. and Walker, Stuart D. (2010) Service differentiated drop code unit for metro ring optical networks. IET Optoelectron, 4 (1). pp. 46-50. ISSN 1751-8768

Ahmad Hambali, Nor Azura Malini and Mahdi, Mohd Adzir and Al-Mansoori, Mohammed Hayder and Saripan, M. Iqbal and Abas, Ahmad Fauzi and Ajiya, M. (2010) Single-wavelength ring-cavity Brillouin-Raman fiber laser. Laser Physics Letters, 7 (6). pp. 454-457. ISSN 1612-2011

Ahmad Hambali, Nor Azura Malini and Mahdi, Mohd Adzir and Al-Mansoori, Mohammed Hayder and Saripan, M. Iqbal and Abas, Ahmad Fauzi and Ajiya, Mohammed (2010) Effect of output coupling ratio on the performance of ring-cavity Brillouin fiber laser. Laser Physics, 20 (7). pp. 1618-1624. ISSN 1054-660X

Ahmadun, Fakhru'l Razi and Pendashteh, Alireza and Zainal Abidin, Zurina and Abdullah, Luqman Chuah and Awang Biak, Dayang Radiah and Madaeni, Sayed Siavash (2010) Application of membrane-coupled sequencing batch reactor for oilfield produced water recycle and beneficial re-use. Bioresource Technology, 101 (18). pp. 6942-6949. ISSN 0960-8524; ESSN: 1873-2976

Ahmedov, Anvarjon (2010) The generalized principle of localization for the N-fold Fourier integrals. Malaysian Journal of Mathematical Sciences, 4 (2). pp. 209-225. ISSN 1823-8343

Ahmedov, Anvarjon and Ashurov, Ravshan (2010) On summability of N-fold Fourier integrals correspondingto pseudodifferential operators. Journal of Pseudo-Differential Operators and Applications, 1 (1). pp. 417-432. ISSN 1662-9981

Ahsan, Amimul and Fukuhara, Teriyuki (2010) Mass and heat transfer model of tubular solar still. Solar Energy, 84 (7). pp. 1147-1156. ISSN 0038-092X (Unpublished)

Ahsan, Amimul and Islam, Kh. M. Shafiul and Fukuhara, Teruyuki and Ghazali, Abdul Halim (2010) Experimental study on evaporation, condensation and production of a new tubular solar still. Desalination, 260 (1-3). pp. 172-179. ISSN 0011-9164; ESSN: 1873-4464

Akande, Fatai Bukola and Ahmad, Desa and Othman, Jamarei and Sulaiman, Shamsuddin and Fashina, Adepoju B. (2010) Empirical determination of the motion resistance of pneumatic bicycle wheels for on and off-road performance. African Journal of Agricultural Research, 5 (23). art. no. F59155329636. pp. 3322-3332. ISSN 1991-637X

Akorede, Mudathir Funsho and Hizam, Hashim and Aris, Ishak and Ab Kadir, Mohd Zainal Abidin (2010) Qualitative and quantitative analysis of system stability and power quality in networks with DG of different penetration levels. International Review of Electrical Engineering, 5 (5). pp. 2366-2377. ISSN 1827-6660; ESSN: 1827-6679

Akorede, Mudathir Funsho and Hizam, Hashim and Aris, Ishak and Ab Kadir, Mohd Zainal Abidin (2010) Re-emergence of distributed generation in electric power systems: incentives, values and issues. Energy & Environment, 21 (2). pp. 75-92. ISSN 0958-305X; ESSN: 2048-4070

Akorede, Mudathir Funsho and Hizam, Hashim and Pouresmaeil, Edris (2010) Distributed energy resources and benefits to the environment. Renewable and Sustainable Energy Reviews, 14 (2). pp. 724-734. ISSN 1364-0321

Al-Asadi, Hamid Ali Abed and Al-Mansoori, Mohammed Hayder and Ajiya, Mohammed and Hitam, Salasiah and Saripan, M. Iqbal and Mahdi, Mohd Adzir (2010) Effects of pump recycling technique on stimulated Brillouin scattering threshold: a theoretical model. Optics Express, 18 (21). pp. 22339-22347. ISSN 1094-4087

Al-Asadi, Hamid Ali Abed and Al-Mansoori, Mohammed Hayder and Hitam, Salasiah and Saripan, M. Iqbal and Mahdi, Mohd Adzir (2010) Brillouin linewidth characterization in single mode large effective area fiber through co-pumped technique. International Journal of Electronics, Computer and Communications Technologies, 1 (1). pp. 16-20. ISSN 2180-3536; ESSN: 2180-3706

Al-Azzawi, Alaa Khamees and Saripan, M. Iqbal and Jantan, Adznan and O. K. Rahmat, Rahmita Wirza (2010) A review of wave-net identical learning & filling-in in a decomposition space of (JPG-JPEG) sampled images. Artificial Intelligence Review, 34 (4). pp. 309-342. ISSN 0269-2821; ESSN: 1573-7462

Al-Ghaili, Abbas Mohammed Ali and Mashohor, Syamsiah and Ramli, Abdul Rahman and Ismail, Alyani (2010) Car license plate detection method for Malaysian plates-styles by using a web camera. Pertanika Journal of Science & Technology, 18 (2). pp. 303-319. ISSN 0128-7680; ESSN: 2231-8526

Al-Gorafi, Mohammed Abdulla Ismail and Abang Ali, Abang Abdullah and Othman, Ismail and Jaafar, Mohd Saleh and Anwar, Mohammed Parvez (2010) Experimental study of externally prestressed segmental beam under torsion. Engineering Structures, 32 (11). pp. 3528-3538. ISSN 0141-0296; ESSN: 1873-7323

Al-Hamati, Abdullah A. N. and Mohammed, Thamer Ahmed and Ghazali, Abdul Halim (2010) Determination of storage volume required in a sub-surface stormwater detention/retention system. Journal of Hydro-environment Research, 4 (1). pp. 47-53. ISSN 1570-6443

Al-Hasan, Yaseen Hasan Tahir and Ng, Chee Kyun and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin and Khatun, Sabira (2010) Adaptive real time wireless data transmission using superposition coding with feedback of channel state information. Scientific Research and Essays, 5 (22). art. no. F38058419163. pp. 3490-3498. ISSN 1992-2248

Al-Mansoori, Mohammed Hayder and Mahdi, Mohd Adzir and Jamaludin, Md Zaini and Md. Din, Norashidah and Abdullah, Fairuz (2010) Enhancement of Brillouin gain efficiency in multiwavelength L-band BEFL by utilizing bi-directional Brillouin pump amplification. International Journal of Wavelets Multiresolution and Information Processing, 27 (7). pp. 1332-1336. ISSN 0219-6913

Al-Shamiry, Faisal Mohammed Seif and Ahmad, Desa (2010) Development and validation of a mathematical model for ventilation rate in crop protection structures. Pertanika Journal of Science & Technology, 18 (1). pp. 111-120. ISSN 0128-7680; ESSN: 2231-8526

Alhawari, Adam Reda Hasan and Ismail, Alyani (2010) Compact wideband bandpass filter using single corners-cut isosceles triangular patch resonator. Progress in Electromagnetics Research C, 14. pp. 227-237. ISSN 1937-8718

Ali, Aidy and Fouladi, Mohammad Hosseini and Sahari, Barkawi (2010) A review of constitutive models for rubber-like materials. American Journal of Engineering and Applied Sciences, 3 (1). pp. 232-239. ISSN 1941-7020; ESSN: 1941-7039

Ali, Aidy and Hosseini, Maryam and Sahari, Barkawi (2010) Continuum damage mechanics modeling for fatigue life of elastomeric materials. International Journal of Structural Integrity, 1 (1). pp. 63-72. ISSN 1757-9864

Ali, Aidy and Hosseini, Maryam and Sahari, Barkawi (2010) A review and comparison on some rubber elasticity models. Journal of Scientific and Industrial Research, 67 (7). pp. 495-500. ISSN 0022-4456; ESSN: 0975-1084

Ali, Aidy and Tun, Chun Yung and Zulkefli, Zamir Aimaduddin and Abd. Aziz, Nuraini and Sahari, Barkawi and Mohammadi, Mehdi Zadeh (2010) Strength investigation of thick welded T-Joint using finite element modelling. Defence Science Journal, 60 (1). pp. 112-118. ISSN 0011-748X; ESSN: 0976-464X

Ali, Aidy and Sanuddin, Asmawi and Ezzeddin, Saifuliwan (2010) The effect of aging on Arenga pinnata fiber-reinforced epoxy composite. Materials and Design, 31 (7). pp. 3550-3554. ISSN 0261-3069; ESSN: 1873-4197

Ali, Hazem Ibrahim and Mohd Noor, Samsul Bahari and Bashi, Sinan Mahmod and Marhaban, Mohammad Hamiruce (2010) PSO-based robust H∞ controller design using cascade compensation network. IEICE Electronic Express, 7 (12). pp. 832-838. ISSN 1349-2543

Aljibori, Hakim S. Sultan and Chong, W. P. and Mahlia, Teuku Meurah Indra and Chong, Wen Tong and Edi, Prasetyo and Al-Qrimli, Haidar and Anjum, Irfan and Zahari, Rizal (2010) Load-displacement behavior of glass fiber/epoxy composite plates with circular cut-outs subjected to compressive load. Materials & Design, 31 (1). pp. 466-474. ISSN 0261-3069

Alwasiti, Haider Hussein and Aris, Ishak and Jantan, Adznan (2010) Brain computer interface design and applications: challenges and future. World Applied Sciences Journal, 11 (7). pp. 819-825. ISSN 1818-4952; ESSN: 1991-6426

Alwasiti, Haider Hussein and Aris, Ishak and Jantan, Adznan (2010) EEG activity in Muslim prayer: a pilot study. Maejo International Journal of Science and Technology, 4 (3). pp. 496-511. ISSN 1905-7873

Ang, Ying Shan and Mohd Ghazi, Tinia Idaty and Abdul Rashid, Suraya (2010) Immobilisation of titanium dioxide onto supporting materials in heterogeneous photocatalysis: a review. Applied Catalysis A: General, 389 (1-2). pp. 1-8. ISSN 0926-860X; ESSN: 1873-3875

Anthonysamy, Regina A. and Ismail, Mohd Halim Shah (2010) Air pollution modelling to predict maximum ground level concentration for dust from a palm oil mill stack. Jurnal Rekayasa Kimia dan Lingkungan, 7 (4). pp. 176-187. ISSN 1412-5064; ESSN: 2356-1661

Anuar, Laili Hayati and Mashohor, Syamsiah and Mokhtar, Makhfudzah and Wan Adnan, Wan Azizun (2010) Nose tip region detection in 3D facial model across large pose variation and facial expression. IJCSI International Journal of Computer Science Issues, 7 (4). pp. 1-9. ISSN 1694-0814; ESSN: 1694-0784

Anuar, Mohd Shamsul and Briscoe, B. J. (2010) Interfacial elastic relaxation during the ejection of bi-layered tablets. International Journal of Pharmaceutics, 387 (1-2). pp. 42-47. ISSN 0378-5173

Anuar, Mohd Shamsul and Briscoe, Brian J. (2010) Detrimental consequences of the paracetamol tablet elastic relaxation during ejection. Drug Development and Industrial Pharmacy, 36 (8). pp. 972-979. ISSN 0363-9045; ESSN: 1520-5762

Arep @ Ariff, Hambali and Salit, Mohd Sapuan and Ismail, Napsiah and Yusoff, Nukman (2010) Material selection of polymeric composite automotive bumper beam using analytical hierarchy process. Journal of Central South University of Technology, 17 (2). pp. 244-256. ISSN 1005-9784

Arintono, Sulistyo (2010) The operating characteristics of intercity public van service in Lampung, Indonesia. Journal of Public Transportation, 13 (1). pp. 25-37. ISSN 1077-291X

Artan, Mohamud Yasin and Ariffin, Abdul Azis and Boo, Huey Chern and Karim, Roselina and Che Man, Yaakob and Chin, Nyuk Ling (2010) Changes in the quality characteristics of white bread made using different shortening formulations during storage. World Applied Sciences Journal, 10 (2). pp. 121-128. ISSN 1818-4952; ESSN: 1991-6426

Artan, Mohamud Yasin and Karim, Roselina and Boo, Huey Chern and Ariffin, Abdul Azis and Che Man, Yaakob and Chin, Nyuk L. (2010) The influence of different formulations of palm oil/palm stearin-based shortenings on the quality of white bread. Middle-East Journal of Scientific Research, 5 (6). pp. 469-476. ISSN 1990-9233

Arvin, Farshad and Samsudin, Khairulmizam and Ramli, Abdul Rahman (2010) Development of IR-based short-range communication techniques for swarm robot applications. Advances in Electrical and Computer Engineering, 10 (4). pp. 61-68. ISSN 1582-7445; ESSN: 1844-7600

Asadi, Afshin and Kim Huat, Bujang and Musa, Mohamed Hanafi and Mohammed, Thamer Ahmed and Shariatmadari, Nader (2010) Physicochemical sensitivities of tropical peat to electrokinetic environment. Geosciences Journal, 14 (1). pp. 1-98. ISSN 1226-4806

Ashurov, Ravshan and Ahmedov, Anvarjon (2010) On summability of N-fold Fourier integrals corresponding to pseudodifferential operators. Journal of Pseudo-Differential Operators and Applications, 1 (4). pp. 417-432. ISSN 1662-9981; ESSN: 1662-999X

Ashurov , Ravshan and Ahmedov, Anvarjon and Mahmud , Ahmad Rodzi (2010) The generalized localization for multiple Fourier integrals. Journal of Mathematical Analysis and Applications , 371 (2). pp. 832-841. ISSN 0022-247X; ESSN: 1096-0813

Awal, Md. Abdul and Wan Ismail, Wan Ishak and Bockari-Gevao, Sakr Marvin (2010) Determination of leaf area index for oil palm plantation using hemispherical photography technique. Pertanika Journal of Science & Technology, 18 (1). pp. 23-32. ISSN 0128-7680; ESSN: 2231-8526

Azlan, Azrina and Prasad, Krishna Murthy Nagendra and Khoo, Hock Eng and Abdul Aziz, Nurnadia and Mohamad, Alina and Ismail, Amin and Amom, Zulkhairi (2010) Comparison of fatty acids, vitamin E and physicochemical properties of Canarium odontophyllum Miq. (dabai), olive and palm oils. Journal of Food Composition and Analysis, 23 (8). pp. 772-776. ISSN 0889-1575

Bachtiar, Dandi and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan (2010) Flexural properties of alkaline treated sugar palm fibre reinforced epoxy composites. International Journal of Automotive and Mechanical Engineering, 1. pp. 79-90. ISSN 2229-8649; ESSN: 2180-1606

Bachtiar, Situs Dandi and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdan, Khalina and Mohd Dahlan, Khairul Zaman (2010) The tensile properties of single sugar palm (Arenga pinnata) fibre. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Baharudin, B. T. Hang Tuah and Sulaiman, Shamsuddin and Mohd Arrifin, Mohd Khairol Anuar and Abdul Aziz, Faieza and Salit, Mohd Sapuan (2010) Coating performance in high speed micro machining of H13 tool steel. Advanced Materials Research, 83-86. pp. 985-992. ISSN 1022-6680; ESSN: 1662-8985

Bahraminejad, Behzad and Basri, Shahnor and Isa, Maryam and Hambali, Zarida (2010) Application of a sensor array based on capillary-attached conductive gas sensors for odor identification. Measurement Science and Technology, 21 (8). art. no. 085204. pp. 1-17. ISSN 0957-0233

Bahraminejad, Behzad and Basri, Shahnor and Isa, Maryam and Hambali, Zarida (2010) Real-time gas identification by analyzing the transient response of capillary-attached conductive gas sensor. Sensors, 10 (6 ). pp. 5359-5377. ISSN 1424-8220

Bahraminejad, Behzad and Basri, Shahnor and Mohd Isa, Maryam and Hambali, Zarida (2010) Evaluation of dimension effects on a capillary-attached gas sensor. Measurement Science and Technology, 21 (6). art. no. 065202. pp. 1-7. ISSN 0957-0233; ESSN: 1361-6501

Baker, Alaa M. and Ng, Chee Kyun and Noordin, Nor Kamariah and Al-Iman, Ahmed Mustafa and Moghanjoughi, Ayyoub Akbari (2010) An optimized energy saving mechanism in IEEE 802.16e mobile WiMAX systems. Journal of High Speed Networks, 17 (3). pp. 147-161. ISSN 0926-6801; ESSN: 1875-8940

Bakhsh, Hamid Khoda and Wan Adnan, Wan Azizun and Christianus, Annie and Saad, Che Roos and Zainal Abidin, Aizam and Movassagh, Sanaz (2010) Computerized visual assessment and validation technique in an Integrated Agriculture-Aquaculture System (IAAS). Journal of Sustainability Science and Management, 5 (2). pp. 32-43. ISSN 1823-8556

Balafar, Mohammad Ali and Ramli, Abdul Rahman and Mashohor, Syamsiah (2010) A new method for MR grayscale inhomogeneity correction. Artificial Intelligence Review, 34 (2). pp. 195-204. ISSN 0269-2821; ESSN: 1573-7462

Balafar, Mohammad Ali and Ramli, Abdul Rahman and Saripan, M. Iqbal and Mashohor, Syamsiah (2010) Review of brain MRI image segmentation methods. Artificial Intelligence Review, 33 (3). pp. 261-274. ISSN 0269-2821; ESSN: 1573-7462

Balafar, Mohammad Ali and Ramli, Abdul Rahman and Saripan, M. Iqbal and Mashohor, Syamsiah and Mahmud, Rozi (2010) Improved fast fuzzy C-mean and its application in medical image segmentation. Journal of Circuits, Systems and Computers, 19 (1). pp. 203-214. ISSN 0218-1266; ESSN: 1793-6454

Balafar, Mohammad Ali and Ramli, Abdul Rahman and Saripan, M. Iqbal and Mashohor, Syamsiah and Mahmud, Rozi (2010) Medical image segmentation using Fuzzy C-Mean (FCM) and user specified data. Journal of Circuits, Systems and Computers, 19 (1). pp. 1-14. ISSN 0218-1266; ESSN: 1793-6454

Barghchi, Maassoumeh and Omar, Dasimah and Aman, Mohd Salleh and Kazemian, Sina and Kim Huat, Bujang (2010) Exploratory research on sports facilities construction in Malaysia. Australian Journal of Basic and Applied Sciences, 4 (10). pp. 5326-5331. ISSN 1991-8178

Basri, Mohamad Firwance and Yacob, Shahrakbah and Hassan, Mohd Ali and Shirai, Yoshihito and Wakisata, Minato and Zakaria @ Mamat, Mohd Rafein and Phang, Lai Yee (2010) Improved biogas production from palm oil mill effluent by a scaled-down anaerobic treatment process. World Journal of Microbiology and Biotechnology, 26 (3). pp. 505-514. ISSN 0959-3993; ESSN: 1573-0972

Bayagoob, Khaled H. and Noorzaei, Jamaloddin and Jaafar, Mohd Saleh and Thanoon, Waleed Abdulmalik and Abdulrazeg, Aeid Ali (2010) Modelling heat exchange between RCC dam and reservoir. Proceedings of the ICE - Engineering and Computational Mechanics, 163 (1). pp. 33-42. ISSN 1755-0777

Bayagoob, Khaled Hamood and Noorzaei, Jamaloddin and Abdulrazeg, Aeid. A. and Al-Karni, Awad A. and Jaafar, Mohd Saleh (2010) Coupled thermal and structural analysis of roller compacted concrete arch dam by three-dimensional finite element method. Structural Engineering and Mechanics, 36 (4). pp. 401-419. ISSN 1225-4568; ESSN: 1598-6217

Bayat, Mehdi and Mohazzab, Amir Hossein and Sahari, Barkawi and Saleem, Mahdiyya (2010) Exact solution for functionally graded variable-thickness rotating disc with heat source. Journal of Mechanical Engineering Science, 224 (11). pp. 2316-2331. ISSN 0954-4062; ESSN: 2041-2983

Beh, Chin Lai and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Kamarudzaman, Mohd Zakwan and Abdan, Khalina (2010) Adsorption study of electric arc furnace slag for the removal of manganese from solution. American Journal of Applied Sciences, 7 (4). pp. 442-446. ISSN 1546-9239; ESSN: 1554-3641

Bejo, Siti Khairunniza and Petrou, Maria and Ganas, Athanassios (2010) Local similarity measure for landslide detection and identification in comparison with the image differencing method. International Journal of Remote Sensing, 31 (23). pp. 6033-6045. ISSN 0143-1161

Benzaghta, Mostafa Ali and Mohammed Ali, Thamer Ahmed and Ghazali, Abdul Halim and Mohd Soom, Mohd Amin (2010) Study on simplified model for estimating evaporation from reservoirs. Australian Journal of Basic and Applied Sciences, 4 (12). pp. 6473-6482. ISSN 1991-8178

Bukhari, Zubaidah and Mahmud, Ahmad Rodzi and Ahmad, Noordin (2010) Spatial multi-criteria decision analysis for safe school site selection. International Geoinformatics Research and Development Journal, 1 (2). pp. 1-14. ISSN 0976-1241; ESSN: 1927-3665

Che Lah, Nur Azida and Ali, Aidy and Ismail, Napsiah and Lim, Poon Chai and Mohamed, Abdul Aziz (2010) The effect of controlled shot peening on fusion welded joints. Materials and Design, 31 (1). pp. 312-324. ISSN 0264-1275

Che Man, Hasfalina and Maryam, R.Z. and Abdullah, Luqman Chuah and Rashid, M. (2010) The potential use of kenaf as a bioadsorbent for the removal of Copper and Nickel from single and binary aqueous solution. Journal of Natural Fibers, 7 (4). pp. 267-275. ISSN 1544-0478; ESSN: 1544-046X

Che Soh, Azura and Hassan, Mohd Khair and Ishak, Asnor Juraiza (2010) Vehicle gas leakage detector. The Pacific Journal of Science and Technology, 11 (2). pp. 66-76. ISSN 1551-7624

Che Soh, Azura and Md Sarkan, Haslina (2010) MATLAB simulation of fuzzy traffic controller for multilane isolated intersection. International Journal on Computer Science and Engineering, 2 (4). pp. 924-933. ISSN 0975-3397

Chieh, C. W. and Ali, Aidy and Sanuddin, Asmawi and Hosseinabadi, Reza Afshar (2010) Durability simulation of elastomeric materials using finite element method (FEM). Pertanika Journal of Science & Technology, 18 (2). pp. 441-450. ISSN 0128-7680; ESSN: 2231-8526

Chin, Kit Ling and H'ng, Paik San and Wong, Lih Jiun and Tey, Beng Ti and Md. Tahir, Paridah (2010) Optimization study of ethanolic fermentation from oil palm trunk, rubberwood and mixed hardwood hydrolysates using Saccharomyces cerevisiae. Bioresource Technology, 101 (9). pp. 3287-3291. ISSN 0960-8524; ESSN: 1873-2976

Chin, Nyuk Ling and Abdul Rahman, Russly and Mat Hashim, Dzulkifly and Kowng, Shin Yueh (2010) Palm oil shortening effects on baking performance of white bread. Journal of Food Process Engineering, 33 (3). pp. 413-433. ISSN 0145-8876

Chong, Fui Chin and Tan, Wen Siang and Awang Biak, Dayang Radiah and Ling, Tau Chuan and Tey, Beng Ti (2010) Direct recovery of recombinant nucleocapsid protein of Nipah virus from unclarified Escherichia coli homogenate using hydrophobic interaction expanded bed adsorption chromatography. Journal of Chromatography A, 1217 (8). pp. 1293-1297. ISSN 0021-9673

Chong, Fui Chin and Tan, Wen Siang and Awang Biak, Dayang Radiah and Ling, Tau Chuan and Tey, Beng Ti (2010) Modulation of protease activity to enhance the recovery of recombinant nucleocapsid protein of Nipah virus. Process Biochemistry, 45 (1). pp. 133-137. ISSN 1359-5113

Chong, Fui Chin and Tan, Wen Siang and Awang Biak, Dayang Radiah and Ling, Tau Chuan and Tey, Beng Ti (2010) A preparative hydrophobic interaction chromatography for purification of recombinant nucleocapsid protein of Nipah virus from clarified Escherichia coli homogenate. Separation and Purification Technology, 71 (1). pp. 97-101. ISSN 1383-5866

Chua, Bee Lin and Taip, Farah Saleena and Ab. Aziz, Norashikin and Choong, Thomas Shean Yaw (2010) Design of PI controller with input constraint: application on blending process. Journal of Food Process Engineering, 33 (S1). pp. 284-297. ISSN 0145-8876; ESSN: 1745-4530

Darestani, Soroush Avakh and Ismail, Md. Yusof and Ismail, Napsiah (2010) Recognition of nonrandom patterns on supply performance by employing statistical monitoring. Journal of American Science, 6 (4). pp. 114-122. ISSN 1545-1003; ESSN: 2375-7264

Darestani, Soroush Avakh and Ismail, Md. Yusof and Ismail, Napsiah and Mohd Yusuff, Rosnah (2010) An investigation on supplier delivery performance by using SPC techniques for automotive industry. Journal of American Science, 6 (4). pp. 5-11. ISSN 1545-1003; ESSN: 2375-7264

Darestani, Soroush Avakh and Ismail, Md. Yusof and Ismail, Napsiah and Mohd. Yusuff, Rosnah (2010) Quantifying suppliers' product quality: an exploratory product audit method. South African Journal of Industrial Engineering, 21 (2). pp. 149-159. ISSN 1012-277X; ESSN: 2224-7890

Dodangeh, Javad and Mohd Yusuff, Rosnah and Jassbi, Javad (2010) Using TOPSIS method with goal programming for best selection of strategic plans in BSC model. Journal of American Science, 6 (3). pp. 136-142. ISSN 1545-1003; ESSN: 2375-7264

El-Harbawi, Mohanad and Mustapha, Saari and Choong, Thomas Shean Yaw and Abdul Rashid, Zulkifli and Mohamed Shariff, Abdul Rashid and Sherif, Aly A. (2010) SCIA: GIS-based software for assessing the impacts from chemical industrial accidents. Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management, 14 (2). pp. 104-114. ISSN 1090-025X

El-Harbawi, Mohanad and Razali, Zatil Azhani and Syed Mohd Fuzi, Syed Mohd Faiz and Mustapha, Sa'ari (2010) Development of a layer of protection analysis tool to determine the safety integrity level in process industries. Journal of Applied Sciences, 10 (24). pp. 3319-3324. ISSN 1812-5654; ESSN: 1812-5662

Esfandiari, Ehsan and Mariun, Norman and Marhaban, Mohammad Hamiruce and Zakaria, Azmi (2010) Switch-ladder: reliable and efficient multilevel inverter. Electronics Letters, 46 (9). pp. 646-647. ISSN 0013-5194

Eshkuratov, Zainidin K. and Ahmedov, Anvarjon and Nik Long, Nik Mohd Asri and Shafiq, Osama (2010) Approximate solution of a nonlinear system of integral equations using modified Newton-Kantorovich method. Journal of Fundamental Sciences, 6 (2). pp. 154-159. ISSN 1823-626X

Eshkuratov, Zainidin K. and Ahmedov, Anvarjon and Nik Long, Nik Mohd Asri and Shafiq, Osama (2010) Approximate solution of the system of nonlinear integral equation by Newton–Kantorovich method. Applied Mathematics and Computation, 217 (7). pp. 3717-3725. ISSN 0096-3003

Esmaeilian Marnani, A. and Abas, Ahmad Fauzi and Moravvej Farshi, M. K. and Ebnali Heidari, M. (2010) Realization of wavelength conversion with hyperbolic secant femtosecond pulse in normal dispersion regime. Journal of Modern Optics, 57 (8). pp. 601-606. ISSN 0950-0340

Farahani, Abolfazl Sousanabadi and Adam, Nor Mariah and Mohd Ariffin, Khairol Anuar (2010) Simulation of airflow and aerodynamic forces acting on a rotating turbine ventilator. American Journal of Engineering and Applied Sciences, 3 (1). pp. 159-170. ISSN 1941-7020; ESSN: 1941-7039

Farrokhpayam, Saeid Reza and Ratnasingam, Jegatheswaran and Bakar, Edi Suhaimi and Tang, Sai Hong (2010) Characterizing Surface Defects of Solid Wood of Dark Red Meranti (Shorea sp.),Melunak (pentace sp.) and Rubberwood (Heavea Brasiliensis) in Planning Process. Journal of Applied Sciences, 10 (11). pp. 915-918. ISSN 1812-5654

Fatchurrohman, Nanang and Sulaiman, Shamsuddin (2010) The Effect of Particulate Reinforcement Addition to Latent Heat and Solid Fraction During Solidification of Titanium Carbide Particulates Reinforced Aluminium Alloy Matrix Composite Produced by Vortex Mixing-Sand Casting Technique. International Review of Mechanical Engineering, 4 (1). pp. 12-17. ISSN 1970-8734

Fatchurrohman, Nanang and Sulaiman, Shamsuddin (2010) Production and solidification analysis of titanium carbide particulates reinforced aluminium alloy matrix composite by vortex mixing - sand casting technique. ICASTOR Journal of Engineering, 3 (1). pp. 13-20. ISSN 0974-407X

Fathi, Masood and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah (2010) A note on “A multi-objective genetic algorithm for solving assembly line balancing problem”. International Journal of Advanced Manufacturing Technology, 50 (5-8). pp. 771-773. ISSN 0268-3768; ESSN: 1433-3015

Ghaderi, Hadi and Darestani, Soroush Avakh and Leman, Zulkiflle and Ismail, Md Yusof (2010) Development of a soft network model to improve supply chain management performance of SMEs. Scientific Research and Essays, 5 (13). art. no. 723913919945. pp. 1759-1764. ISSN 1992-2248

Ghasimi, Seyed Mohammad Dara and Tey, Beng Ti and Suyot, Ronifasla and Ghasimi, Sara (2010) Municipal solid waste management at Taman Beringin Transfer Station in Malaysia. Waste Management, 30 (2). pp. 357-359. ISSN 0956-053X; ESSN: 1879-2456

Ghiasi, Vahed and Omar, Husaini and Md Yusoff, Zainuddin and Kim Huat, Bujang and Muniandy, Ratnasamy and Alias, Mohd Najmin (2010) A new model of microcracks propagation in granite rock. Australian Journal of Basic and Applied Sciences, 4 (12). pp. 5830-5851. ISSN 1991-8178

Ghiasi, Vahed and Omar, Husaini and Md Yusoff, Zainuddin and Kim Huat, Bujang and Muniandy, Ratnasamy and Ghosni, Nassin and Nushini, Amin and Afshar, Mohhamad Amin and Ghiasi, Samad and Hosaini, Seyeg Ghavamodin and Ghiasi, Mohammad (2010) Design criteria of subway tunnels. Australian Journal of Basic and Applied Sciences, 4 (12). pp. 5894-5907. ISSN 1991-8178

Ghiasi, Vahed and Omar, Husaini and Rostami, Jamal and Kim Huat, Bujang (2010) Construction regulations along metro alignment. Australian Journal of Basic and Applied Sciences, 4 (12). pp. 5972-6009. ISSN 1991-8178; ESSN: 2309-8414

Ghiyamat, Azadeh and Mohd Shafri, Helmi Zulhaidi (2010) A review on hyperspectral remote sensing for homogeneous and heterogeneous forest biodiversity assessment. International Journal of Remote Sensing, 31 (7). pp. 1837-1856. ISSN 0143-1161

Gholizadeh, Asa and Mohd Soom, Mohd Amin and Abdul Rahim, Anuar and Esfahani, Masoud and Saberioon, Mohammadmehdi (2010) The study on the effect of different levels of zeolit and water stress on growth, development and essential oil content of moldavian balm (Dracocephalum moldavica L.). American Journal of Applied Sciences, 7 (1). pp. 33-37. ISSN 1546-9239; ESSN: 1554-3641

Gholizadeh, Asa and Mohd Soom, Mohd Amin and Abdul Rahim, Anuar and Saberioon, Mohamed M. (2010) Water stress and natural zeolite impacts on phisiomorphological characteristics of moldavian balm (Dracocephalum moldavica l.). Australian Journal of Basic and Applied Sciences, 4 (10). pp. 5184-5190. ISSN 1991-8178

Givi, Alireza Naji and Abdul Rashid, Suraya and Abd. Aziz, Farah Nora Aznieta and Mohd Salleh, Mohamad Amran (2010) Contribution of rice husk ash to the properties of mortar and concrete: a review. Journal of American Science, 6 (3). pp. 157-165. ISSN 1545-1003; ESSN: 2375-7264

Hamid, Akhir and Ahmad, Desa and Rukunuddin, Ibni Hajar (2010) Performance of sweet potato transplanting machine on mineral and BRIS soils. AMA, Agricultural Mechanization in Asia, Africa and Latin America, 41 (1). pp. 55-59. ISSN 0084-5841

Hamza, Bashar J. and Ng, Chee Kyun and Noordin, Nor Kamariah and A. Rasid, Mohd Fadlee and Ismail, Alyani (2010) Review of minimizing a vertical handover in a heterogeneous wireless network. IETE Technical Review, 27 (2). 97 - 106. ISSN 0256-4602; ESSN: 0974-5971

Hamza, Bashar Jabbar and Ng, Chee Kyun and Noordin, Nor Kamariah and A. Rasid, Mohd Fadlee and Ismail, Alyani (2010) The seamless vertical handover between (universal mobile telecommunications system) UMTS and (wireless local area network) WLAN by using hybrid scheme of Bi-mSCTP in mobile IP. Scientific Research and Essays, 5 (22). art. no. 29D2C1A19150. pp. 3474-3489. ISSN 1992-2248

Hamza, Bashar Jabbar and Ng, Chee Kyun and Noordin, Nor Kamariah and A. Rasid, Mohd Fadlee and Ismail, Alyani and Tahir, Yaseen Hasan (2010) Enhancement of packet reordering in a mobile stream control transmission protocol for a heterogeneous wireless network vertical handover. Journal of High Speed Networks, 17 (3). pp. 163-173. ISSN 0926-6801; ESSN: 1875-8940

Harun, Razif and Danquah, Michael K. and Forde, Gareth M. (2010) Microalgal biomass as a fermentation feedstock for bioethanol production. Journal of Chemical Technology and Biotechnology, 85 (2). pp. 199-203. ISSN 0268-2575; ESSN: 1097-4660

Harun, Razif and Khehra, Manjinder Singh and Forde, Gareth M. and Danquah, Michael K. (2010) Bioprocess engineering of microalgae to produce a variety of consumer products. Renewable and Sustainable Energy Reviews, 14 (3). pp. 1037-1047. ISSN 1364-0321; ESSN: 1879-0690

Hasan, Ahmed M. and Samsudin, Khairulmizam and Ramli, Abdul Rahman and Raja Abdullah, Raja Syamsul Azmir (2010) Comparative study on wavelet filter and thresholding selection for GPS/INS data fusion. International Journal of Wavelets, Multiresolution and Information Processing, 8 (3). pp. 457-473. ISSN 0219-6913; ESSN: 1793-690X

Hasan, Ahmed Mudheher and Samsudin, Khairulmizam and Ramli, Abdul Rahman and Raja Abdullah, Raja Syamsul Azmir (2010) Wavelet-based pre-filtering for low cost inertial sensors. Journal of Applied Sciences, 10 (19). pp. 2217-2230. ISSN 1812-5654; ESSN: 1812-5662

Hasan, Ali T. and Ismail, Napsiah and Hamouda, Abdel Magid Salem and Aris, Ishak and Marhaban, Mohammad Hamiruce and Al-Assadi, Hayder M. A. Ali (2010) Artificial neural network-based kinematics Jacobian solution for serial manipulator passing through singular configurations. Advances in Engineering Software, 41 (2). pp. 359-367. ISSN 0965-9978

Hasany, Norman and Jantan, Adznan and Selamat, Mohd Hasan and Saripan, M. Iqbal (2010) Querying ontology using keywords and quantitative restriction phrases. Information Technology Journal, 9 (1). pp. 67-78. ISSN 1812-5638; ESSN: 1812-5646

Hashima, Suhairul and Bradley, D. A. and Saripan, M. Iqbal and Ramli, Ahmad Termizi and Wagiran, Husin (2010) The thermoluminescence response of doped SiO2 optical fibres subjected to fast neutrons. Applied Radiation and Isotopes, 68 (4-5). pp. 700-703. ISSN 0969-8043

Hassan, Mohd Khair and Aris, Ishak (2010) The effect of the ignition dwell time at constant speed for CNGDI engine. Australian Journal of Basic and Applied Sciences, 4 (10). pp. 4691-4694. ISSN 1991-8178

Hassan, Mohd Khair and Aris, Ishak and Bashi, Sinan Mahmod and Mohd Sidek, Roslina (2010) Influence of injection and ignition of CNG fuelled direct injection engine at constant speed. Australian Journal of Basic and Applied Sciences, 4 (10). pp. 4870-4879. ISSN 1991-8178

Hedayati, Mahdi and Mariun, Norman and Hizam, Hashim and Bashi, Senan Mahmood (2010) Investigating the performance of shunt FACTS for the operation of induction motors under different voltage sag conditions. Journal of Applied Sciences, 10 (23). pp. 3014-3020. ISSN 1812-5654; ESSN: 1812-5662

Heidarpour, Farideh and Wan Ab Karim Ghani, Wan Azlina and Ahmadun, Fakhru'l-Razi and Sobri, Shafreeza and Zargar, M. and Mozafari, M. Reza (2010) Nano silver-coated polypropylene water filter : II. evaluation of antimicrobial efficiency. Digest Journal of Nanomaterials and Biostructures, 5 (3). pp. 797-804. ISSN 1842-3582

Helmi, Adam and Ismail, Alyani and Mahdi, Mohd Adzir (2010) Compact wideband multilayer microstrip coupled lines bandpass filter for X-band application. Microwave and Optical Technology Letters, 52 (3). pp. 448-450. ISSN 0895-2477

Hizam, Hashim and Aris, Ishak and Ab Kadir, Mohd Zainal Abidin and Akorede, Mudathir Funsho (2010) A critical review of strategies for optimal allocation of Distributed Generations units in Electrical Power Systems. International Review of Electrical Engineering, 5 (2). pp. 593-600. ISSN 1827-6660

Hojabri, Mojgan and Hizam, Hashim and Mariun, Norman and Abdullah, Senan Mahmood (2010) Comparative analysis of ATC probabilistic methods. Journal of American Science, 6 (9). pp. 1-4. ISSN 1545-1003; ESSN: 2375-7264

Hua, Law Teik and Noland, R.B. and Evans, A.W. (2010) The direct and indirect effects of corruption on motor vehicle crash deaths. Accident Analysis and Prevention, 42 (6). pp. 1934-1942. ISSN 0001-4575; ESSN: 1879-2057

Hussain, Siti Aslina and Tan, Hong Tat and Idris, Azni (2010) Numerical studies of fluid flow across a cosmo ball by using CFD. Journal of Applied Sciences, 10 (24). pp. 3384-3387. ISSN 1812-5654; ESSN: 1812-5662

Hussein, Basheer Noaman and Sulaiman, Nasri and Ali, Hazem Ibrahim (2010) Robust controller design for single axis magnetic levitation system. Australian Journal of Basic and Applied Sciences, 4 (9). pp. 4379-4389. ISSN 1991-8178

Hussein, Zinah Rajab and O. K. Rahmat, Rahmita Wirza and Abdullah, Lili Nurliyana and Saripan, M. Iqbal and Dimon, Mohd Zamrin (2010) Quantitative detection of left ventricular wall motion abnormality by two-dimensional echocardiography. Computer and Information Science, 3 (2). pp. 79-85. ISSN 1913-8989; ESSN: 1913-8997

Indriasaria, Vini and Mahmud, Ahmad Rodzi and Ahmad, Noordin and M. Shariff, Abdul Rashid (2010) Maximal service area problem for optimal siting of emergency facilities. International Journal of Geographical Information Science, 24 (2). pp. 213-230. ISSN 1365-8824

Ishak, Mohamad Ridzwan and Leman, Zulkiflle and Salit, Mohd Sapuan and Edeerozey, A. M. M. and Othman, Intan Sharhida (2010) Mechanical properties of kenaf bast and core fibre reinforced unsaturated polyester composites. IOP Conference Series: Materials Science and Engineering, 11 (1). art. no. 012006. pp. 1-6. ISSN 1757-899X

Islam, Md. Syedul and Ahmad, Desa (2010) Crop establishment technologies for lowland rice cultivation in Bangladesh: hand seeding vs. machine seeding. Pertanika Journal of Science & Technology, 18 (1). pp. 95-103. ISSN 0128-7680; ESSN: 2231-8526

Ismail, Abdul Halim and Marhaban, Mohammad Hamiruce and Mohd Noor, Samsul Bahari and Hashim, Ahmad Tarmizi (2010) Feature extraction from oil palm in vitro shoot images. Journal of Oil Palm Research, 22 (2). pp. 765-773. ISSN 1511-2780

Ismail, Zuliana and Varatharajoo, Renuganth (2010) A study of reaction wheel configurations for a 3-axis satellite attitude control. Advances In Space Research, 45 (6). pp. 750-759. ISSN 0273-1177

Ismail , Samy and Mansor, Shattri and Kim Huat, Bujang and Rodsi , Ahmed (2010) Topographic openness algorithm for characterizing geologic fractures of Kuala Lumpur limestone bedrock using DEM. Journal of Geomatics, 4 (2 ). pp. 61-68. ISSN 1007-3817

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin (2010) New algorithm for evaluation of electric fields due to indirect lightning strike. Computer Modeling in Engineering and Sciences, 67 (1). pp. 1-12. ISSN 1526-1492; ESSN: 1526-1506

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Wan Ahmad, Wan Fatinhamamah (2010) An analytical second-FDTD method for evaluation of electric and magnetic fields at intermediate distances from lightning channell. Progress In Electromagnetics Research, 110. pp. 329-352. ISSN 1559-8985

Jaafar, Haslina and Sidek, Othman and Miskam, Muhamad Azman and Abdul Rahman, Muhammad Razi (2010) High-isolation and low-loss RF MEMS shunt switches. Applied Computational Electromagnetics Society Journal, 25 (9). pp. 780-786. ISSN 1054-4887

Jahan, Ali and Ismail, Md. Yusof and Mustapha, Faizal and Salit, Mohd Sapuan (2010) Material selection based on ordinal data. Materials & Design, 31 (7). pp. 3180-3187. ISSN 0261-3069

Jahan, Ali and Ismail, Md. Yusof and Salit, Mohd Sapuan and Mustapha, Faizal (2010) Material screening and choosing methods – A review. Materials and Design, 31 (2). pp. 696-705. ISSN 0264-1275; ESSN: 1873-4197

Jamek, Shariza and Ngoh, Gek Cheng and Chuah, Teong Guan (2010) The isolation and amplification of full length cDNA of oleosins from oil palm (Elaeis guineensis Jacq.). African Journal of Biotechnology, 9 (13). art. no. 5F4A5DD19794. pp. 1859-1863. ISSN 1684–5315

James Jayaselan, Helena Anusia and Wan Ismail, Wan Ishak (2010) Kinematics analysis for five DOF fresh fruit bunch harvester. International Journal of Agricultural and Biological Engineering, 3 (3). pp. 1-7. ISSN 1934-6344; ESSN: 1934-6352

Javanmard, Marjan and Endan, Johari and Abbas, Kassim Ali and Arvin, Farshad (2010) Development of a semi-industrial multi fruit dryer system using simultaneous intelligent control. American Journal of Applied Sciences, 7 (2). pp. 160-166. ISSN 1546-9239; ESSN: 1554-3641

Jokar, Maryam and Abdul Rahman, Russly and Ibrahim, Nor Azowa and Abdullah, Luqman Chuah and Tan, Chin Ping (2010) Characterization and biocompatibility properties of silver nanoparticles produced using short chain polyethylene glycol. Journal of Nano Research, 10. pp. 29-37. ISSN 1662-5250; ESSN: 1661-9897

Kalantari, Behzad and Kim Huat, Bujang and Prasad, Arun (2010) Effect of polypropylene fibers on the California bearing ratio of air cured stabilized tropical peat soil. American Journal of Engineering and Applied Sciences, 3 (1). pp. 1-6. ISSN 1941-7020; ESSN: 1941-7039

Kamal, Md Rowshon and Mohd Soom, Mohd Amin (2010) GIS-based irrigation water management for precision farming of rice. International Journal of Agricultural and Biological Engineering, 3 (3). pp. 27-35. ISSN 1934-6344; ESSN: 1934-6352

Karimaldini, Fatemeh and Lee, Teang Shui and Abdollahi, Mohammadreza and Khalili, Najmeh (2010) Deciding the embedding nonlinear model dimensions and data size prior to daily reference evapotranspiration modeling. Australian Journal of Basic and Applied Sciences, 4 (11). pp. 5668-5674. ISSN 1991-8178

Karimi-Googhari, Shahram and Huang, Yuk Feng and Ghazali, Abdul Halim and Lee, Teang Shui (2010) Neural networks for forecasting daily reservoir inflows. Pertanika Journal of Science & Technology, 18 (1). pp. 33-41. ISSN 0128-7680; ESSN: 2231-8526

Kazemian, Sina and Barghchi, Maassoumeh and Prasad, Arun and Maydi, Hossein and Kim Huat, Bujang (2010) Reinforced pavement above trench under urban traffic load: case study and finite element (FE) analysis. Scientific Research and Essays, 5 (21). art. no. 7926B7118744. pp. 3313-3329. ISSN 1992-2248

Kazemian, Sina and Kim Huat, Bujang and Prasad, Arun and Barghchi, Maassoumeh (2010) A review of stabilization of soft soils by injection of chemical grouting. Australian Journal of Basic and Applied Sciences, 4 (12). pp. 5862-5868. ISSN 1991-8178

Kazemian, Sina and Prasad, Arun and Kim Huat, Bujang (2010) Rheological behavior of grout in context of Newtonian and non-Newtonian fund. Electronic Journal of Geotechnical Engineering, 15 (K). pp. 1103-1115. ISSN 1089-3032

Kazemian, Sina and Prasad, Arun and Kim Huat, Bujang and Mohammed, Thamer Ahmed and Abd. Aziz, Farah Nora Aznieta (2010) Effect of cement, sodium silicate, kaolinite and water on the viscosity of the grout. Scientific Research and Essays, 5 (22). art. no. 4F3172B19067. pp. 3434-3442. ISSN 1992-2248

Keshani, Samaneh and Abdullah, Luqman Chuah and Mobarekeh, Mohsen Nourouzi and Abdul Rahman, Russly and Bakar, Jamilah (2010) Optimization of concentration process on pomelo fruit juice using response surface methodology (RSM). International Food Research Journal, 17 (3). pp. 733-742. ISSN 1985-4668; ESSN: 2231-7546

Khabbazi, Mahmood Reza and Ismail, Md. Yusof and Ismail, Napsiah and Mousavi, Sayed Alireza (2010) Modeling of Traceability Information System for Material Flow Control Data. Australian Journal of Basic and Applied Sciences, 4 (2). pp. 208-216. ISSN 1991-8178

Kohnehpooshi, Omid and Noorzaei, Jamaloddin and Jaafar, Mohd Saleh and Abdulrazeg, Aeid Ali and Muhammad Rashid, Raizal Saifulnaz (2010) Three dimensional finite element modeling of reinforced concrete beams, using lagrangian and truss-linkage elements. Asian Journal of Civil Engineering (Building And Housing), 11 (1). pp. 71-82. ISSN 1563-0854

Lai, Yin Ling and Chuah, Teong Guan and Razon, Luis F. and Ahamad, Intan Salwani and Choong, Thomas Shean Yaw (2010) An overview on convergence acceleration of cyclic adsorption processes. Journal of the Institution of Engineers, Malaysia, 71 (1). pp. 38-43. ISSN 0126-513X

Lee, L. S. and Ali, Aidy and Sanuddin, Asmawi and Reza, Afshar (2010) Simulation and Experimental Work on a Thin-Walled Structure Under Crushing. Journal of Failure Analysis and Prevention, 10. pp. 143-151. ISSN 1547-7029

Lee, Soon Heng and H'ng, Paik San and Lee, A. N. and Sajap, Ahmad Said and Tey, Beng Ti and Ujang, Salmiah (2010) Production of pyroligneous acid from lignocellulosic biomass and their effectiveness against biological attacks. Journal of Applied Sciences, 10 (20). pp. 2440-2446. ISSN 1812-5654; ESSN: 1812-5662

Leman, Zulkiflle and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Ahmad, M. M. H. M. (2010) Pre-treatment by water retting to improve the interfacial bonding strength of sugar palm fibre reinforced epoxy composite. Polymers from Renewable Resources, 1 (1). pp. 35-45. ISSN 2045-1377

Liew, Jane Chiar Jenn and Tan, Wen Siang and Mohammed Alitheen, Noorjahan Banu and Chan, Eng Seng and Tey, Beng Ti (2010) Over-expression of the X-linked inhibitor of apoptosis protein (XIAP) delays serum deprivation-induced apoptosis in CHO-K1 cells. Journal of Bioscience and Bioengineering, 110 (3). pp. 338-344. ISSN 1389-1723; ESSN: 1347-4421

Luechau, Frank and Ling, Tau Chuan and Lyddiatt, Andrew (2010) Two-step process for initial capture of plasmid DNA and partial removal of RNA using aqueous two-phase systems. Process Biochemistry, 45 (8). pp. 1432-1436. ISSN 1359-5113

Luechau, Frank and Tau, Chuan Ling and Lyddiatt, Andrew (2010) Physical characterisations of a single-stage Kühni-type aqueous two-phase extraction column. Biochemical Engineering Journal, 50 (3). pp. 90-98. ISSN 1369-703X

Luechau, Frank and Tau, Chuan Ling and Lyddiatt, Andrew (2010) A descriptive model and methods for up-scaled process routes for interfacial partition of bioparticles in aqueous two-phase systems. Biochemical Engineering Journal, 50 (3). pp. 122-130. ISSN 1369-703X

Lutfy, Omar F. and Mohd Noor, Samsul Bahari and Marhaban, Mohammad Hamiruce and Abbas, Kassim A. (2010) Utilizing global-best harmony search to train a PID-like ANFIS controller. Australian Journal of Basic and Applied Sciences, 4 (12). pp. 6319-6330. ISSN 1991-8178

Lutfy, Omar Farouq and Mohd Noor, Samsul Bahari and Marhaban, Mohammad Hamiruce and Abbas, Kassim A. (2010) A simplified PID-like ANFIS controller trained by genetic algorithm to control nonlinear systems. Australian Journal of Basic and Applied Sciences, 4 (12). pp. 6331-6345. ISSN 1991-8178

M. M., Shahzamanian and Sahari, Barkawi and Bayat, Mehdi and Zahari, Nur Ismarrubie and Mustapha, Faizal (2010) Transient and thermal contact analysis for the elastic behavior of functionally graded brake disks due to mechanical and thermal loads. Materials and Design, 31 (10). pp. 4655-4665. ISSN 0264-1275

Mahdiraji, Ghafour Amouzad and Abdullah, Mohamad Khazani and Malekmohammadi, Amin and Abas, Ahmad Fauzi and Mokhtar, Makhfudzah and Zahedi, Edmond (2010) Duty-cycle division multiplexing (DCDM). Optics & Laser Technology, 42 (2). pp. 289-295. ISSN 0030-3992; ESSN: 1879-2545

Mahdiraji, Ghafour Amouzad and Abdullah, Mohamad Khazani and Mokhtar, Makhfudzah and Mohammadi, Amin Malek and Abas, Ahmad Fauzi and Mohd Basir, Safuraa and Raja Abdullah, Raja Syamsul Azmir (2010) 70-Gb/s amplitude-shift-keyed system with 10-GHz clock recovery circuit using duty cycle division multiplexing. Photonic Network Communications, 19 (3). pp. 233-239. ISSN 1387-974X; ESSN: 1572-8188

Mahmoud, Thair S. and Marhaban, Mohammad Hamiruce and Tang, Sai Hong (2010) ANFIS: Self-tuning Fuzzy PD Controller for Twin Rotor MIMO System. IEEJ Transactions on Electrical and Electronic Engineering, 5 (3). pp. 369-371. ISSN 1931-4981

Mahmouei, Sahar Sabbaghi and Mansor, Shattri and Abedniya, Abed (2010) An approach to a pseudo real-time image processing engine for hyperspectral imaging. International Journal of Computer Science and Information Security, 8 (7). pp. 201-207. ISSN 1947-5500

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Ahmad, Desa and Ali, Aidy and Abdan, Khalina and Mehdi, Janoobi (2010) Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam. Materials & Design, 31 (10). pp. 4927-4932. ISSN 0264-1275; ESSN: 1873-4197

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Ali, Aidy and Ahmad, Desa and Abdan, Khalina (2010) Thermoplastic impact property improvement in hybrid natural fibre epoxy composite bumper beam. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Malekmohammadi, Amin and Al-Mansoori, Mohammed Hayder and Mahdiraji, Ghafour Amouzad and Abas, Ahmad Fauzi and Abdullah, Mohamad Khazani (2010) Performance enhancement of Absolute Polar Duty Cycle Division Multiplexing with Dual-Drive Mach–Zehnder-Modulator in 40 Gbit/s optical fiber communication systems. Optics Communications, 283 (16). pp. 3145-3148. ISSN 0030-4018

Mansor, Halimathon and Mohd Noor, Samsul Bahari and Raja Ahmad, Raja Mohd Kamil and Taip, Farah Saleena and Lutfy, Omar F. (2010) Intelligent control of grain drying process using fuzzy logic controller. International Journal of Food, Agriculture and Environment, 8 (1). pp. 145-149. ISSN 1459-0255

Marhaban, Mohammad Hamiruce and Kaid, Rakeeb Saeed and Mohd Noor, Samsul Bahari (2010) Automatic estimation of gestational age in ultrasound images based on direct least-squares fitting of ellipse. IEEJ Transactions on Electrical and Electronic Engineering, 5 (5). pp. 569-573. ISSN 1931-4973; ESSN: 1931-4981

Masdi, Hendri and Mariun, Norman (2010) Transient response study on transformer windings under impulse voltage stresses. International Review of Electrical Engineering, 5 (3). pp. 1022-1026. ISSN 1827-6660; ESSN: 1827-6679

Mat Said, Aini and Ahmadun, Fakhru'l-Razi (2010) Development of socio-technical disaster model. Safety Science, 48 (10). pp. 1286-1295. ISSN 0925-7535

Md Salleh, Liza and Abdul Rahman, Russly and Bimakr, Mandana and Selamat, Jinap and Rahmat, Asmah and Sarker, Md. Zaidul Islam and Abdul Hamid, Azizah (2010) Supercritical carbon dioxide extraction of bioactive flavonoid from strobilanthes crispus (Pecah Kaca). Food and Bioproducts Processing, 88 (2-3). pp. 319-326. ISSN 0960-3085; ESSN: 1744-3571

Md Yunus, Nurul Amziah and Green, Nicolas G. (2010) Fabrication of microfluidic device channel using a photopolymer for colloidal particle separation. Microsystem Technologies, 16 (12). pp. 2099-2107. ISSN 0946-7076; ESSN: 1432-1858

Mirjalili, Fatemeh and Mohamad, Hasmaliza and Abdullah, Luqman Chuah (2010) Size-controlled synthesis of nano α-alumina particles through the sol–gel method. Ceramics International, 36 (4). pp. 1253-1257. ISSN 0272-8842

Misman, Muhamad Afizzul and Mohd Shafri, Helmi Zulhaidi and Raja Ahmad, Raja Mohd Kamil (2010) Effects of hyperspectral data transformations on urban inter-class separations using a support vector machine. Journal of Applied Sciences, 10 (19). pp. 2241-2250. ISSN 1812-5654; ESSN: 1812-5662

Misron, Norhisam and Nirei, Masami and Masruni, Norafiza and Aris, Ishak and Jelani, Abdul Razak and Wakiwaka, Hiroyuki (2010) Comparison of single-and multiple-pole permanents magnets in a double-stator slot-less permanent magnet generator. Journal of the Magnetics Society of Japan, 34 (3). pp. 407-410. ISSN 1882-2924; ESSN: 1882-2932

Misron, Norhisam and Nirei, Masami and Masruni, Norafiza and Sia, Chee Yap and Wakiwaka, Hiroyuki (2010) Basic characteristics of double stator slot-type permanent magnet generator. Journal of the Magnetics Society of Japan, 34 (3). pp. 385-388. ISSN 1882-2924; ESSN: 1882-2932

Moayedi, Hossein and Kim Huat, Bujang and Kazemian, Sina and Asadi, Afshin (2010) Optimization of Tension Absorption of Geosynthetics through Reinforced Slope. Electronic Journal of Geotechnical Engineering, 15. pp. 93-104. ISSN 1089-3032

Moayedi, Hossein and Kim Huat, Bujang and Mohammad Ali, Thamer Ahmad and Haghighi, Ali Torabi and Asadi, Afshin (2010) Analysis of Longitudinal Cracks in Crest of Doroodzan Dam. Electronic Journal of Geotechnical Engineering, 15. pp. 337-347. ISSN 1089-3032

Moayedi, Hossein and Kim Huat, Bujang and Asadi, Afshin (2010) Strain absorption optimization of reinforcement on geosynthetic reinforced slope: experimental and FEM modeling. Electronic Journal of Geotechnical Engineering, 15 (bund. M). pp. 1563-1569. ISSN 1089-3032

Moayedi, Hossein and Kim Huat, Bujang and Mokhberi, Mehdi and Moghaddam, Arash Ansari and Moghaddam, Shokoufeh Ansari (2010) Using stone column as a suitable liquefaction remediation in Persian Gulf coast. Electronic Journal of Geotechnical Engineering, 15 P. pp. 1757-1767. ISSN 1089-3032

Moazami, Danial and Muniandy, Ratnasamy (2010) Fuzzy inference and multi-criteria decision making applications in pavement rehabilitation prioritization. Australian Journal of Basic and Applied Sciences, 4 (10). pp. 4740-4748. ISSN 1991-8178

Moazami, Danial and Muniandy, Ratnasamy and Hamid, Hussain and Md Yusoff, Zainuddin (2010) Developing a comprehensive pavement management system in Tehran, Iran using microPAVER. Electronic Journal of Geotechnical Engineering, 15 (P). pp. 1782-1792. ISSN 1089-3032

Mobarekeh, Mohsen Nourouzi and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw (2010) Adsorption of glyphosate onto activated carbon derived from waste newspaper. Desalination and Water Treatment, 24 (1-3). pp. 321-326. ISSN 1944-3994; ESSN: 1944-3986

Mobarekeh, Mohsen Nourouzi and Chuah, Teong Guan and Choong, Thomas Shean Yaw (2010) Optimization of flocculation process for cut-stone wastewater: effect of rapid mix parameters. Desalination and Water Treatment, 22 (1-3). pp. 127-132. ISSN 1944-3994; ESSN: 1944-3986

Mohamad, Nurhaniza and Mohd Atan, Kamel Ariffin and Ali, Aidy and Mustapha, Faizal and Abdul Wahab, Noraini (2010) Finite element analysis of composites materials for aerospace applications. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Mohamed, Al Mabruk S. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Hamouda, Abdel Magid Salem and Baharudin, B. T. Hang Tuah (2010) Modeling technology transfer for petroleum industry in Libya: an overview. Scientific Research and Essays, 5 (2). art. no. 78C57A216546. pp. 130-147. ISSN 1992-2248

Mohamed Yusoff, Mohd Zuhri and Salit, Mohd Sapuan and Ismail, Napsiah and Wirawan, Riza (2010) Mechanical Properties of Short Random Oil Palm Fibre Reinforced Epoxy Composites. Sains Malaysiana, 39 (1). pp. 87-92. ISSN 0126-6039

Mohamed Zawawi, Mohamed Azwan and Mustapha, Sa'ari and Puasa, Zuzana (2010) Determination of water requirement in a paddy field at Seberang Perak rice cultivation area. Journal of the Institution of Engineers, Malaysia, 71 (4). pp. 32-41. ISSN 0126-513X

Mohammad Yusoff, Wardah Fatimah and Salleh, Elias and Adam, Nor Mariah and Sapian, Abdul Razak and Sulaiman, Mohamad Yusof (2010) Enhancement of stack ventilation in hot and humid climate using a combination of roof solar collector and vertical stack. Building and Environment, 45 (10). pp. 2296-2308. ISSN 0360-1323

Mohammadi, Mitra and Che Man, Hasfalina and Hassan, Mohd Ali and Phang, Lai Yee (2010) Treatment of wastewater from rubber industry in Malaysia. African Journal of Biotechnology, 9 (38). art. no. F1D29F320620. pp. 6233-6243. ISSN 1684–5315

Mohammady, Somayeh and Varahram, Pooria and Mohd Sidek, Roslina and Hamidon, Mohd Nizar and Sulaiman, Nasri (2010) Efficiency improvement in microwave power amplifiers by using complex gain predistortion technique. IEICE Electronics Express, 7 (23). pp. 1721-1727. ISSN 1349-2543

Mohammady, Somayeh and Varahram, Pooria and Mohd Sidek, Roslina and Hamidon, Mohd Nizar and Sulaiman, Nasri (2010) FPGA implementation of the complex division in digital predistortion linearizer. Australian Journal of Basic and Applied Sciences, 4 (10). pp. 5028-5037. ISSN 1991-8178

Mohammed, Thamer Ahmed and Abdul Kadir, Mohd Razali and Megat Mohd Noor, Megat Johari and Sulaiman, Ahmad Husaini (2010) Assessment of using tunneling and trenchless technology for constricting twin box culvert. Pertanika Journal of Science & Technology, 18 (1). pp. 155-166. ISSN 0128-7680; ESSN: 2231-8526

Mohd Husin, Ezrin and Mohd Soom, Mohd Amin and Abdul Rahim, Anuar and Wayayok, Aimrun (2010) Relationship between rice yield and apparent electrical conductivity of paddy soils. American Journal of Applied Sciences, 7 (1). pp. 63-70. ISSN 1546-9239; ESSN: 1554-3641

Mohd Jakarni, Fauzan and Muniandy, Ratnasamy and Hassim, Sudin and Mahmud, Ahmad Rodzi (2010) Analysis of stone mastic asphalt (SMA) slab dimensions for evaluation of the newly developed roller compactor (Turamesin). Pertanika Journal of Science & Technology, 18 (1). pp. 13-22. ISSN 0128-7680; ESSN: 2231-8526

Mohd Nasir, N. and T., Teo Ming and Ahmadun, F. R. and Sobri, S. (2010) Decomposition and biodegradability enhancement of textile wastewater using a combination of electron beam irradiation and activated sludge process. Water Science and Technology, 62 (1). pp. 42-47. ISSN 0273-1223; ESSN: 1996-9732

Mohd Salleh, Mohamad Amran and Kisiki, Nsamba Hussein and Mohamed Yusoff, Hamdan and Wan Ab. Karim Ghani, Wan Azlina (2010) Gasification of biochar from empty fruit bunch in a fluidized bed reactor. Energies, 3 (7). pp. 1344-1352. ISSN 1996-1073

Mohd Shafri, Helmi Zulhaidi and Mohd Zahidi, Izni and Abu Bakar, Shamsul (2010) Development of landslide susceptibility map utilizing remote sensing and Geographic Information Systems (GIS). Disaster Prevention and Management: An International Journal, 19 (1). pp. 59-69. ISSN 0965-3562

Mohd Tahir, Suraya and Ariffin, Ahmad Kamal and Anuar, Mohd Shamsul (2010) Finite element modelling of crack propagation in metal powder compaction using Mohr–Coulomb and Elliptical Cap yield criteria. Powder Technology, 202 (1-3). pp. 162-170. ISSN 0032-5910

Mohd Yusuff, Rosnah and Wan Ahmad, Wan Nurul Karimah and Zulkifli, Norzima (2010) Quality management maturity and its relationship with human resource development strategies in manufacturing industry. Asian International Journal of Science and Technology in Production and Manufacturing Engineering, 3 (3). pp. 53-63. ISSN 1906-151X

Moheb Pour, Majid Reza and Jantan, Adznan and Saripan, M. Iqbal (2010) Grid base classifier in comparison to nonparametric methods in multiclass classification. Pertanika Journal of Science & Technology, 18 (1). pp. 139-154. ISSN 0128-7680; ESSN: 2231-8526

Mojahed, Majid and Mohd Yusuff, Rosnah and Reyhani, Mohammad (2010) Determining and ranking essential criteria of construction project selection in telecommunication of north Khorasan-Iran. International Journal of Environmental Science and Development, 1 (1). pp. 79-84. ISSN 2010-0264

Monjezi, Razieh and Tey, Beng Ti and Sieo, Chin Chin and Tan, Wen Siang (2010) Purification of bacteriophage M13 by anion exchange chromatography. Journal of Chromatography B: Analytical Technologies in the Biomedical and Life Sciences, 878 (21). pp. 1855-1859. ISSN 1570-0232

Montakhab, Amir and Ghazali, Abdul Halim and Megat Mohd Noor, Megat Johari and Mohammad Ali, Thamer Ahmad and Yusuf, Badronnisa (2010) Effects of drying and salt extraction of Moringa oleifera on its coagulation of high turbidity water. Journal of American Science, 6 (10). pp. 387-392. ISSN 1545-1003; ESSN: 2375-7264

Motlagh, Omid Reza Esmaeili and Ramli, Abdul Rahman and Tang, Sai Hong and Motlagh, Farid Esmaeili and Ismail, Napsiah (2010) Motion modelling using concepts of fuzzy artificial potential fields. International Journal of Automotive and Mechanical Engineering, 2. pp. 171-180. ISSN 2229-8649; ESSN: 2180-1606

Muhammad and Choong, Thomas Shean Yaw and Chuah, Teong Guan and Yunus, Robiah and Abdul Rashid, Suraya (2010) Sorption kinetics for the removal of cadmium and zinc onto palm kernel shell based activated carbon. Jurnal Rekayasa Kimia dan Lingkungan, 7 (4). pp. 149-155. ISSN 1412-5064; ESSN: 2356-1661

Muhssin, Mazin T. and Raja Ahmad, Raja Mohd Kamil and Marhaban, Mohammad Hamiruce and Bafti, Payam Shafiei (2010) Development of the propagation paths and deriving observer of feedforward active noise control system by using state-space formulation. Australian Journal of Basic and Applied Sciences, 4 (8). pp. 3770-3779. ISSN 1991-8178

Mumtaz, Tabassum and Khan, Muhammad Rahim and Hassan, Mohd Ali (2010) Study of environmental biodegradation of LDPE films in soil using optical and scanning electron microscopy. Micron, 41 (5). pp. 430-438. ISSN 0968-4328

Mustapa Kamal, Siti Mazlina and Abd Rahman, Nur 'Aliaa and H., Nor Hidayati and Mohd Shariff, Intan Shaidatul Shima and Wan Hasan, Wan Zuha (2010) Design and development of an apparatus for grating and peeling fruits and vegetables. American Journal of Food Technology, 5 (6). pp. 385-393. ISSN 1557-4571; ESSN: 1557-458X

Mustapha, Faizal and Ismail, Napsiah and Salit, Mohd Sapuan and Noh, Z. and Samsuri, Abd Wahid (2010) Development of a prototype knowledge based system for troubleshooting of aircraft engine and parts- A case study of Cessna Caravan. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 36-42. ISSN 1823-0334

Mustapha, Faizal and Mustapha, Mazli and Noorsal, Kartini and Mamat, Othman and Hussain, Patthi and Ahmad, Faiz and Muhamad, Norhamidi and Mohamed Haris, Sallehuddin (2010) Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process. Journal of Materials Processing Technology, 210 (12). pp. 1598-1612. ISSN 0924-0136; ESSN: 1873-4774

Najigivi, Alireza and Abdul Rashid, Suraya and Abd. Aziz, Farah Nora Aznieta and Mohd Salleh, Mohamad Amran (2010) Assessment of the effects of rice husk ash particle size on strength, water permeability and workability of binary blended concrete. Construction and Building Materials, 24 (11). pp. 2145-2150. ISSN 0950-0618

Najigivi, Alireza and Abdul Rashid, Suraya and Abd. Aziz, Farah Nora Aznieta and Mohd Salleh, Mohamad Amran (2010) Experimental investigation of the size effects of SiO2 nano-particles on the mechanical properties of binary blended concrete. Composites Part B: Engineering, 41 (8). pp. 673-677. ISSN 1359-8368; ESSN: 1879-1069

Nasab, Marjan Bahrami and Hassan, Mohd Roshdi and Sahari, Barkawi (2010) Metallic biomaterials of knee and hip - a review. Trends in Biomaterials and Artificial Organs, 24 (2). pp. 69-82. ISSN 0971-1198

Ng, Chee Kyun and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin and Jamuar, Sudhanshu Shekhar and Ismail, Mahamod (2010) Spectrum efficiency enhancement in dynamic space coded multiple access (DSCMA) system. Wireless Personal Communications, 53 (2). pp. 253-267. ISSN 0929-6212; ESSN: 1572-834X

Noorzaei, Jamaloddin and Abdulrazeg, Aeid. A. and Jaafar, Mohd Saleh and Kohnehpooshi, Omid (2010) Non-linear analysis of an integral bridge. Journal of Civil Engineering and Management, 16 (3 ). pp. 387-394. ISSN 1392-3730

Noroziroshan, Alireza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah (2010) Application of intelligence based genetic algorithm for job sequencing problem on parallel mixed-model assembly line. American Journal of Engineering and Applied Sciences, 3 (1). pp. 15-24. ISSN 1941-7020; ESSN: 1941-7039

Nouri, Hamideh and Mohd Soom, Mohd Amin and Razavi, Seyed Jalil and Abdul Rahim, Anuar and Wayayok, Aimrun and Borujeni, Sattar Chavoshi (2010) Sugar beet performance affected by uniformity of N fertigation. American Journal of Applied Sciences, 7 (3). pp. 366-370. ISSN 1546-9239; ESSN: 1554-3641

Nouri, Hossein and Tang, Sai Hong and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar (2010) BASE: a bacteria foraging algorithm for cell formation with sequence data. Journal of Manufacturing Systems, 29 (2-3). pp. 102-110. ISSN 0278-6125; ESSN: 1878-6642

Obaid, Zeyad Assi and Sulaiman, Nasri and Marhaban, Mohammad Hamiruce and Hamidon, Mohd Nizar (2010) Analysis and performance evaluation of PD-like fuzzy logic controller design based on Matlab and FPGA. IAENG International Journal of Computer Science, 37 (2). ISSN 1819-656X; ESSN: 1819-9224

Othman, Mohammad Lutfi and Aris, Ishak and Abdullah, Senan Mahmood and Ali, Md. Liakot and Othman, Mohammad Ridzal (2010) Knowledge discovery in distance relay event report: a comparative data-mining strategy of rough set theory with decision tree. IEEE Transactions on Power Delivery, 25 (4). pp. 2264-2287. ISSN 0885-8977; ESSN: 1937-4208

Othman, Siti Hajar and Abdul Rashid, Suraya and Mohd Ghazi, Tinia Idaty and Abdullah, Norhafizah (2010) Effect of Fe doping on phase transition of TiO2 nanoparticles synthesized by MOCVD. Journal of Applied Sciences, 10 (12). pp. 1044-1051. ISSN 1812-5654; ESSN: 1812-5662

Pang, Jia Hong and Sulaiman, Nasri (2010) Genetic algorithm optimization for coefficient of FFT processor. Australian Journal of Basic and Applied Sciences, 4 (9). pp. 4184-4192. ISSN 1991-8178

Pendashteh, Alireza and Ahmadun, Fakhru'l-Razi and Chuah, Teong Guan and Awang Biak, Dayang Radiah and Madaeni, Sayed Siavash and Zainal Abidin, Zurina (2010) Biological treatment of produced water in a sequencing batch reactor by a consortium of isolated halophilic microorganisms. Environmental Technology, 31 (11). pp. 1229-1239. ISSN 0959-3330; ESSN: 1479-487X

Perumal, Thinagaran and Ramli, Abd Rahman and Chui, Yew Leong and Samsudin, Khairulmizam and Mansor, Shattri (2010) Middleware for heterogeneous subsystems interoperability in intelligent buildings. Automation in Construction, 19 (2). pp. 160-168. ISSN 0926-5805

Pin, Kar Yong and Abdullah, Luqman Chuah and Ahmad, Abdull Rashih and Md. Pisar, Mazura and Jamaludin, Fadzureena and Subramaniam, Vimala and Mat Ali, Rasadah (2010) Antioxidant and anti-inflammatory activities of extracts of betel leaves (Piper betle) from solvents with different polarities. Journal of Tropical Forest Science, 22 (4). pp. 448-455. ISSN 0128-1283

Pradhan, Biswajeet and Pirasteh, Saied and Varatharajoo, Renuganth (2010) Enhancement of semi-automated lineament extraction from IRS- 1B satellite images for part of Himalayan region. International Journal of Geoinformatics, 6 (2). pp. 41-50. ISSN 1686-6576

Pradhan, Biswajeet and Youssef, Ahmed Mohamed and Varathrajoo, Renuganth (2010) Approaches for delineating landslide hazard areas using different training sites in an advanced artificial neural network model. Geo-spatial Information Science, 13 (2). pp. 93-102. ISSN 1009-5020; ESSN: 1993-5153

Rafeeu, Yaaseen and Ab Kadir, Mohd Zainal Abidin and Abdullah, Senan Mahmood and Adam, Nor Mariah (2010) Solar radiation and temperature measurement of solar dish concentrator system. Journal of Energy and Power Engineering, 4 (2). pp. 15-19. ISSN 1934-8975; ESSN: 1934-8983

Rahimi, Maryam and Jamuar, Sudhanshu Shekhar and Hamidon, Mohd Nizar and Ahmad, Mohd Rais and Mousavi, Sayed Alireza and Bayat, Mehdi (2010) An optimized 2.4 GHz VCO circuit design and simulation with high-Q MEMS LC-tank. International Journal of Electronics and Communications, 64 (5). pp. 413-424. ISSN 1434-8411

Rahman, Ataur and Mohiuddin, A. K. M. and Ismail, Ahmad Faris and Yahya, Azmi and Hossain, Altab (2010) Development of hybrid electrical air-cushion tracked vehicle for swamp peat. Journal of Terramechanics, 47. pp. 45-54. ISSN 0022-4898

Rahman, Muhd Ambri and Abdul Aziz, Faieza (2010) Electrostatic discharge (ESD) improvement to reduce customer complaint. Scientific Research and Essays, 5 (19). art. no. C44174C17115. pp. 3003-3008. ISSN 1992-2248

Raja Ahmad, Raja Mohd Kamil and Tokhi, Mohammad Osman (2010) Analysis of geometry related constraints of minimum effort active noise control system. Journal of Low Frequency Noise, Vibration and Active Control, 29 (2). pp. 111-128. ISSN 0263-0923

Ramanan, Ramakrishnan Nagasundara and Tau, Chuan Ling and Tey, Beng Ti and Ariff, Arbakariya (2010) A simple method for quantification of interferon-α2b through surface plasmon resonance technique. African Journal of Biotechnology, 9 (11). art. no. 31EEEA018087. pp. 1680-1689. ISSN 1684–5315

Ramanan, Ramakrishnan Nagasundara and Wong, Bee Tik and Memari, Hamid Rajabi and Azaman, Siti Nor Ani and Tau, Chuan Ling and Tey, Beng Ti and Mohd Lila, Mohd Azmi and Abdullah, Mohd Puad and Abdul Rahim, Raha and Ariff, Arbakariya (2010) Effect of promoter strength and signal sequence on the periplasmic expression of human interferon-α2b in Escherichia coli. African Journal of Biotechnology, 9 (3). art. no. E05979530638. pp. 285-292. ISSN 1684–5315

Ramanana, Ramakrishnan Nagasundara and Tana, Joo Shun and Mohamed, Mohd Shamzi and Tau, Chuan Ling and Tey, Beng Ti and Ariff, Arbakariya (2010) Optimization of osmotic shock process variables for enhancement of the release of periplasmic interferon-α2b from Escherichia coli using response surface method. Process Biochemistry, 45 (2). pp. 196-202. ISSN 1359-5113

Rashdi, Abdalla A. Ab. and Salit, Mohd Sapuan and Abdan, Khalina and Megat Ahmad, Megat Mohamad Hamdan (2010) Water absorption behaviour of kenaf reinforced unsaturated polyester composites and its influence on their mechanical properties. Pertanika Journal of Science & Technology, 18 (2). pp. 433-440. ISSN 0128-7680; ESSN: 2231-8526

Razali, Mohd Hudzari and Wan Ismail, Wan Ishak and Sulaiman, Md. Nasir and Ismail, Napsiah and Mohamed Shariff, Abdul Rashid (2010) Computer simulation technique for two degree of freedom agriculture robot arm. International Journal of Computational Intelligence Techniques, 1 (2). pp. 15-17. ISSN 0976-0466; ESSN: 0976-0474

Rezapour, Omolbani Mohamad and Lee, Teang Shui and Ahmad, Desa (2010) Review of artificial neural network model for suspended sediment estimation. Australian Journal of Basic and Applied Sciences, 4 (8). pp. 3347-3353. ISSN 1991-8178

Rimy, M.M. and Abdul Aziz, Faieza (2010) Simulation of car bumper material using finite element analysis. Journal of Software Engineering, 4 (3). pp. 257-264. ISSN 1819-4311; ESSN: 2152-0941

Rokhani, Fakhrul Zaman and Sobelman, Gerald Edward (2010) Bus energy consumption for multilevel signals. IEEE Transactions on Circuits and Systems-I: Regular Papers, 57 (1). pp. 64-71. ISSN 1549-8328; ESSN: 1558-0806

Romli, Fairuz Izzudin (2010) Aircraft redesign through strategic planning of engineering changes. International Review of Aerospace Engineering, 3 (6). pp. 336-352. ISSN 1973-7459; ESSN: 1973-7440

Roslan, R. E. and Mohd Saad, Wira Hidayat and Saripan, M. Iqbal and Hashim, Sharifah and Choong, W. S. (2010) The performance of a wire mesh collimator SPECT camera for different breast volumes in prone position. Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 619 (1-3). pp. 385-387. ISSN 0168-9002

Roslee, Mardeni and Raja Abdullah, Raja Syamsul Azmir and Mohd Shafri, Helmi Zulhaidi (2010) Road pavement density analysis using a new non-destructive ground penetrating radar system. Progress In Electromagnetics Research B, 21. pp. 399-417. ISSN 1937-6472

Rusnam, and Mohd Soom, Mohd Amin and Idris, Azni and Lee, Teang Shui (2010) Runoff quality index for area under maize cultivation. Journal of the Institution of Engineers, Malaysia, 71 (4). pp. 18-24. ISSN 0126-513X

Saberi, Sara and Mohd Yusuff, Rosnah and Zulkifli, Norzima and Megat Ahmad, Megat Mohamad Hamdan (2010) Effective factors on advanced manufacturing technology implementation performance: a review. Journal of Applied Sciences, 10 (13). pp. 1229-1242. ISSN 1812-5654; ESSN: 1812-5662

Saberioon, Mohammadmehdi and Mardan, Makhdzir and Nordin, Laili and Mohd Sood, Alias and Gholizadeh, Asa (2010) Predict location(s) of Apis dorsata nesting sites using remote sensing and geographic information system in Melaleuca forest. American Journal of Applied Sciences, 7 (2). pp. 252-259. ISSN 1546-9239; ESSN: 1554-3641

Saeed, Rashid Abdelhaleem and Khatun, Sabira and Mohd Ali, Borhanuddin and Abdullah, Khazani (2010) A joint PHY/MAC cross-layer design for UWB under power control. Computers and Electrical Engineering, 36 (3). pp. 455-468. ISSN 0045-7906

Safaei, Mehrdad and Omar, Husaini and Ghiasi, Vahed and Yousof, Zenoddin B.M. (2010) Applying geospatial technology to landslide susceptibility assessment. Electronic Journal of Geotechnical Engineering, 15 (G). pp. 677-696. ISSN 1089-3032

Saghravani, Seyed Reza and Mustapha, Sa'ari and Ibrahim, Shaharin and Mohd. Zawawi, Mohd. Azwan and Randjbaran, Elias (2010) Simulation of phosphorus movement in unconfined aquifer by means of visual MODFLOW. Journal of Computer Science, 6 (4). pp. 446-449. ISSN 1549-3636

Sahbudin, Ratna Kalos Zakiah and Fauzi, S. A. and Hitam, Salasiah and Mokhtar, Makhfudzah (2010) Investigation of electrical potential and electromagnetic field for overhead high voltage power lines in Malaysia. Journal of Applied Sciences, 10 (22). pp. 2862-2868. ISSN 1812-5654; ESSN: 1812-5662

Samad, M. S. A. and Ali, Aidy (2010) Simulation work of fatigue life prediction of rubber automotive components. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Samsu Baharuddin, Azhari and Abdul Razak, Mohamad Nafis and Lim, Siong Hock and Ahmad, Mohd Najib and Abd. Aziz, Suraini and Abdul Rahman, Nor'aini and Md. Shah, Umi Kalsom and Hassan, Mohd Ali and Kenji, Sakai and Shirai, Yoshihito (2010) Isolation and characterization of thermophilic cellulase-producing bacteria from empty fruit bunches-palm oil mill effluent compost. American Journal of Applied Sciences, 7 (1). pp. 56-62. ISSN 1546-9239; ESSN: 1554-3641

Samsu Baharuddin, Azhari and Lim, Siong Hock and Mohd Yusoff, Mohd Zulkhairi and Abdul Rahman, Nor'aini and Md. Shah, Umi Kalsom and Hassan, Mohd Ali and Wakisaka, Minato and Sakai, Kenji and Shirai, Yoshihito (2010) Effects of palm oil mill effluent (POME) anaerobic sludge from 500 m3 of closed anaerobic methane digested tank on pressed-shredded empty fruit bunch (EFB) composting process. African Journal of Biotechnology, 9 (16). art. no. AA21A4E21148. pp. 2427-2436. ISSN 1684–5315

Schmidt, Brendon J. C. and Zan, Zuraidah and Liang, B. Du and Lowery, Arthur J. (2010) 120 Gbit/s Over 500-km Using Single-Band Polarization-Multiplexed Self-Coherent Optical OFDM. Journal of Lightwave Technology, 28 (4). pp. 328-335. ISSN 0733-8724

Selvakumar, Pitchaivelu and Tau, Chuan Ling and Walker, Simon and Lyddiatt, Andrew (2010) Redefinition of working aqueous two-phase systems: a generic description for prediction of the effective phase chemical composition for process control and biorecovery. Journal of Chromatography B: Analytical Technologies in the Biomedical and Life Sciences, 878 (21). pp. 1784-1790. ISSN 1570-0232

Selvakumara, Pitchaivelu and Ling, Tau Chuan and Walker, Simon and Lyddiatt, Andrew (2010) A practical implementation and exploitation of ATPS for intensive processing of biological feedstock: a novel approach for heavily biological feedstock loaded ATPS. Separation and Purification Technology, 75 (3). pp. 323-331. ISSN 1383-5866

Shahrjerdi, Ali and Bayat, Mehdi and Mustapha, Faizal and Salit, Mohd Sapuan and Zahari, Rizal (2010) Free vibration analysis of functionally graded quadrangle plates using second order shear deformation theory. Australian Journal of Basic and Applied Sciences, 4 (5). pp. 893-905. ISSN 1991-8178

Shahrjerdi, Ali and Bayat, Mehdi and Mustapha, Faizal and Salit, Mohd Sapuan and Zahari, Rizal (2010) Stress analysis a functionally graded quadrangle plate using second order shear deformation theory. International Review of Mechanical Engineering, 4 (1). pp. 92-105. ISSN 1970-8734

Shahrokh Abadi, Mohammad Hadi and Hamidon, Mohd. Nizar and Shaari, Abdul Halim and Abdullah, Norhafizah and Misron, Norhisam and Wagiran, Rahman (2010) Characterization of mixed xWO3(1-x)Y2O3 nanoparticle thick film for gas sensing application. Sensors, 10 (5). pp. 5074-5089. ISSN 1424-8220

Shee, Y. G. and Mahdi, Mohd Adzir and Al-Mansoori, Mohammed Hayder and Yaakob, S. and Mohamed, R. and Zamzuri, Abdul Kadir and Man, Azmi and Ismail, Alyani and Hitam, Salasiah (2010) All-optical generation of a 21 GHz microwave carrier by incorporating a double-Brillouin frequency shifter. Optics Letters, 35 (9). pp. 1461-1463. ISSN 0146-9592

Shee, Yu Gang and Al-Mansoori, Mohammed Hayder and Ismail, Alyani and Hitam, Salasiah and Mahdi, Mohd Adzir (2010) Double Brillouin frequency shift through circulation of odd-order Stokes signal. Applied Optics, 49 (20). pp. 3956-3959. ISSN 1559-128X; ESSN: 2155-3165

Sichani, Mohammadmehdi Shahzamanian and Sahari, Barkawi and Bayat, Mehdi and Mustapha, Faizal and Zahari, Nur Ismarrubie (2010) Finite element analysis of thermoelastic contact problem in functionally graded axisymmetric brake disks. Composite Structures, 92 (7). pp. 1591-1602. ISSN 0263-8223; ESSN: 1879-1085

Sidhu, R. S. and Ali, Aidy (2010) Fatigue life of automotive rubber jounce bumper. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Sojodishijani, Omid and Ramli, Abdul Rahman and Rostami, Vahid and Samsudin, Khairulmizam and Saripan, M. Iqbal (2010) Just-in-time outdoor color discrimination using adaptive similarity-based classifier. IEICE Electronics Express, 7 (5). pp. 339-345. ISSN 1349-2543

Solomon, Giwa and Abdullah, Luqman Chuah and Adam, Nor Mariah (2010) Investigating “Egusi” (Citrullus Colocynthis L.) Seed Oil as Potential Biodiesel Feedstock. Energies, 3 (4). pp. 607-618. ISSN 996-1073

Sorooshian, Shahryar and Zulkifli, Norzima and Ismail, Mohd Yusof and Mohd Yusuff, Rosnah (2010) Effect analysis on strategy implementation drivers. World Applied Sciences Journal, 11 (10). pp. 1255-1261. ISSN 1818-4952; ESSN: 1991-6426

Sorooshian, Shahryar and Zulkifli, Norzima and Yusoff, I. and Mohd Yusuff, Rosnah (2010) Structural modeling of entrepreneur's effectiveness. World Applied Sciences Journal, 10 (8). pp. 923-929. ISSN 1818-4952; ESSN: 1991-6426

Sufian, Suriati and Yusup, Suzana and Ahmadun, Fakhru'l-Razi (2010) Optimization for development of carbon nanotubes using Taguchi method at constant temperature. Journal of Nano Research, 11. pp. 95-100. ISSN 1662-5250; ESSN: 1661-9897

Suhail, Adeel H. and Ismail, Napsiah and Wong, Shaw Voon and Abdul Jalil, Nawal Aswan (2010) Optimization of cutting parameters based on surface roughness and assistance of workpiece surface temperature in turning process. American Journal of Engineering and Applied Sciences, 3 (1). pp. 102-108. ISSN 1941-7020; ESSN: 1941-7039

Sulaiman, Alawi and Tabatabaei, Meisam and Mohd Yusoff, Mohd Zulkhairi and Ibrahim, Mohamad Faizal and Hassan, Mohd Ali and Shirai, Yoshihito (2010) Accelerated start-up of a semi-commercial digester tank treating palm oil mill effluent with sludge seeding for methane production. World Applied Sciences Journal, 8 (2). pp. 247-258. ISSN 1818-4952; ESSN: 1991-6426

Taher, Siavash T. and Oshkour, Azim Ataollahi and Zahari, Rizal and Mustapha, Faizal and Basri, Shahnor (2010) On the Crush Behavior of an Ultra Light Multi-Cell Foam-Filled Composite Structure under Axial Compression. Journal of Reinforced Plastics and Composites, 29 (3). ISSN 0731-6844

Tajeddin, Behjat and Abdul Rahman, Russly and Abdullah, Luqman Chuah (2010) The effect of polyethylene glycol on the characteristics of kenaf cellulose/low-density polyethylene biocomposites. International Journal of Biological Macromolecules, 47 (2). pp. 292-297. ISSN 0141-8130

Tajeddin, Behjat and Abdullah, Luqman Chuah (2010) Thermal properties of high density polyethylene-kenaf cellulose composites. Polymers and Polymer Composites, 18 (5). pp. 257-261. ISSN 0967-3911

Tan, Ka Kheng and Tey, Beng Ti and Tan, Yee Wan (2010) Onset of natural convection in gas-gas system induced by bottom-up transient mass diffusion. Engineering Applications of Computational Fluid Mechanics, 4 (4). pp. 475-482. ISSN 1994-2060; ESSN: 1997-003X

Tan, Lee Woun and Ibrahim, Mohd Nordin and Taip, Farah Saleena (2010) Empirical model of spray drying of whole milk powder using nozzle atomizer spray dryer. Journal of Food, Agriculture and Environment, 8 (3&4). pp. 247-252. ISSN 1459-0255; ESSN: 1459-0263

Tawakkal, Intan S. M. A. and A. Talib, Rosnita and Abdan, Khalina and Chin, Nyuk Ling and Ibrahim, Mohd Nordin (2010) Optimisation of processing variables of Kenaf derived cellulose reinforce polylactic acid. Asian Journal of Chemistry, 22 (9). pp. 6652-6662. ISSN 0970-7077; ESSN: 0975-427X

Thanoon, Waleed Abdulmalik and Yardim, Yavuz and Jaafar, Mohd Saleh and Noorzaei, Jamaloddin (2010) Development of interlocking mechanism for shear transfer in composite floor. Construction and Building Materials, 24 (12). pp. 2604-2611. ISSN 0950-0618

Thanoon, Waleed Abdulmalik and Yardim, Yavuz and Jaafar, Mohd Saleh and Noorzaei, Jamaloddin (2010) Structural behaviour of ferrocement–brick composite floor slab panel. Construction and Building Materials, 24 (11). pp. 2224-2230. ISSN 0950-0618

Varahram, Pooria and Al-Azzo, Wisam Fahmi and Mohd Ali, Borhanuddin (2010) A low complexity partial transmit sequence scheme by use of dummy signals for PAPR reduction in OFDM systems. IEEE Transactions on Consumer Electronics, 56 (4). pp. 2416-2420. ISSN 0098-3063

Varahram, Pooria and Mohammady, Somayeh and Hamidon, Mohd Nizar and Mohd Sidek, Roslina and Khatun, Sabira (2010) Complex gain predistortion in WCDMA power amplifiers with memory effects. The International Arab Journal of Information Technology, 7 (3). pp. 333-341. ISSN 1683-3198

Varahram, Pooria and Mohammady, Somayeh and Hamidon, Mohd Nizar and Mohd Sidek, Roslina and Khatun, Sabira (2010) An improvement method for reducing power amplifiers memory effects based on complex gain predistortion. Australian Journal of Basic and Applied Sciences, 4 (7). pp. 2059-2067. ISSN 1991-8178

Varatharajoo, Renuganth and Salit, Mohd Sapuan and Goh, Kian Hong (2010) Material optimization of carbon/epoxy composite rotor for spacecraft energy storage. International Journal of Multiphysics, 4 (2). pp. 95-101. ISSN 1750-9548

Vishkaei, Mahta Sadegh and Mohd Salleh, Mohamad Amran and Yunus, Robiah and Awang Biak, Dayang Radiah and Danafar, Firoozeh and Mirjalili, Fatemeh (2010) Effect of short carbon fiber surface treatment on composite properties. Journal of Composite Materials, 45 (18). pp. 1885-1891. ISSN 0021-9983; ESSN: 1530-793X

Waheed, Bassam M. S. and Moghanjoughi, Ayyoub Akbari and Khatun, Sabira and Mohd Ali, Borhanuddin (2010) A review and comparison of efficient flooding schemes for on-demand routing protocols on mobile ad hoc networks (MANETs). Australian Journal of Basic and Applied Sciences, 4 (8). pp. 3695-3707. ISSN 1991-8178

Wai, Kien Tat and Idris, Azni and Megat Mohd Noor, Megat Johari and Mohammed, Thamer Ahmed and Ghazali, Abdul Halim and Muyibi, Suleyman A. (2010) Optimization study on sewage sludge conditioning using Moringa oleifera seeds. Desalination and Water Treatment, 16 (1-3). pp. 402-410. ISSN 1944-3994

Walvekar, Rashmi Gangasa and Choong, Thomas Shean Yaw and Chuah, Teong Guan and Hussain, Siti Aslina and Khalid, Mohammad (2010) Effect of interphase forces on two-phase liquid: liquid flow in horizontal pipe. Journal of the Institution of Engineers, Malaysia, 71 (2). pp. 35-40. ISSN 0126-513X

Wan Ab Karim Ghani, Wan Azlina and Abdullah, M. S. F. and Matori, Khamirul Amin and Alias, Azil Bahari and Da Silva, Gabriel (2010) Physical and thermochemical characterization of Malaysian biomass ashes. Journal of the Institution of Engineers, Malaysia, 71 (3). pp. 9-18. ISSN 0126-513X

Wan Ismail, Wan Ishak and Abdul Rahman, Khairuddin (2010) Software development for real-time weed colour analysis. Pertanika Journal of Science & Technology, 18 (2). pp. 243-253. ISSN 0128-7680; ESSN: 2231-8526

Wan Ismail, Wan Ishak and Kit, W. H. and Awal, Md. Abdul (2010) Design and development of eggplant harvester for gantry system. Pertanika Journal of Science & Technology, 18 (2). pp. 231-242. ISSN 0128-7680; ESSN: 2231-8526

Wan Ismail, Wan Ishak and Razali, Mohd Hudzari (2010) Image based modeling for oil palm fruit maturity prediction. International Journal of Food, Agriculture and Environment, 8 (2). pp. 469-476. ISSN 1459-0255

Wayayok, Aimrun and Mohd Soom, Mohd Amin and Gholizadeh, Asa (2010) Spatial variability of irrigation water percolation rates and its relation to rice productivity. American Journal of Applied Sciences, 7 (1). pp. 51-55. ISSN 1546-9239; ESSN: 1554-3641

Wirawan, Riza and Salit, Mohd Sapuan and Yunus, Robiah and Abdan, Khalina (2010) Flexural properties of sugarcane bagasse pith and rind reinforced poly(vinyl chloride). IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Yahya, Anwar Ali and Mahmod, Ramlan and Ramli, Abd Rahman (2010) Dynamic Bayesian networks and variable length genetic algorithm for designing cue-based model for dialogue act recognition. Computer Speech and Language, 24 (2). ISSN 0885-2308

Yahya, Azmi and Chong, Puay Sye and Ishola, Tajudeen Abiodun and Suryanto, Hadi (2010) Effect of adding palm oil mill decanter cake slurry with regular turning operation on the composting process and quality of compost from oil palm empty fruit bunches. Bioresource Technology, 101 (22). pp. 8736-8741. ISSN 0960-8524; ESSN: 1873-2976

Yahya, Azmi and El Pebrian, Darius (2010) Comparisons on engine power requirements of 6WD and 4WD prime movers for the oil palm plantation in Malaysia. Journal of Terramechanics, 47 (3). pp. 131-142. ISSN 0022-4898

Yahya, Zuraidah and Husin, Aminuddin and Talib, Jamal and Othman, Jamarei and Ahmed, Osumanu Haruna and Jalloh, Mohamadu Boyie (2010) Soil compaction and oil palm (Elaeis guineensis) yield in a clay textured soil. American Journal of Agricultural and Biological Sciences, 5 (1). pp. 15-19. ISSN 1557-4989; ESSN: 1557-4997

Yahya, Zuraidah and Hussin, Aminuddin and Talib, Jamal and Othman, Jamarei and Ahmed, Osumanu Haruna and Jalloh, Mohamadu Boyie (2010) Oil palm (Elaeis guineensis) roots response to mechanization in Bernam series soil. American Journal of Applied Sciences, 7 (3). pp. 343-348. ISSN 1546-9239; ESSN: 1554-3641

Yap, Wei Boon and Tey, Beng Ti and Mohammed Alitheen, Noorjahan Banu and Tan, Wen Siang (2010) Purification of His-tagged hepatitis B core antigen from unclarified bacterial homogenate using immobilized metal affinity-expanded bed adsorption chromatography. Journal of Chromatography A, 1217 (21). pp. 3473-3480. ISSN 0021-9673; ESSN: 1873-3778

Yau, Ee Wen and Shamsudin, Rosnah and Muda, Noraziah and Chin, Nyuk Ling and Hassan, Osman (2010) Physico-chemical compositions of the red seedless watermelons (Citrullus Lanatus). International Food Research Journal, 17 (2). pp. 327-334. ISSN 1985-4668; ESSN: 2231-7546

Yeoh, S. J. and Taip, Farah Saleena and Endan, Johari and A. Talib, Rosnita and Mustapa Kamal, Siti Mazlina (2010) Development of automatic feeding machine for aquaculture industry. Pertanika Journal of Science & Technology, 18 (1). pp. 105-110. ISSN 0128-7680; ESSN: 2231-8526

Yidris, Noorfaizal and Zahari, Rizal and Abang Abdul Majid, Dayang Laila and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Mohd Rafie, Azmin Shakrine (2010) Crush simulation of woven c-glass/epoxy unmanned ariel vehicle fuselage section. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 260-267. ISSN 1823-0334

Yong, Hor Shee and Tey, Beng Ti and Hii, Siew Ling and Mustapa Kamal, Siti Mazlina and Ariff, Arbakariya and Ling, Tau Chuan (2010) Application of a high density adsorbent in expanded bed adsorption of lipase from Burkholderia pseudomallei. African Journal of Biotechnology, 9 (2). art. no. 51527AC30230. pp. 203-216. ISSN 1684–5315

Yu, Kok Hwa and Kadarman, A. Halim and Djojodihardjo, Harijono (2010) Development and implementation of some BEM variants—a critical review. Engineering Analysis with Boundary Elements, 34 (10). pp. 884-899. ISSN 0955-7997; ESSN: 1873-197X

Yunus, Robiah and Salleh, Shanti Faridah and Abdullah, Norhafizah and Awang Biak, Dayang Radiah (2010) Effect of ultrasonic pre-treatment on low temperature acid hydrolysis of oil palm empty fruit bunch. Bioresource Technology, 101 (24). pp. 9792-9796. ISSN 0960-8524; ESSN: 1873-2976

Yusof, Norjan and Hassan, Mohd Ali and Phang, Lai Yee and Tabatabaei, Meisam and Othman, Mohd Ridzuan and Mori, Masatsugu and Wakisaka, Minato and Kenji, Sakai and Yoshihito, Shirai (2010) Nitrification of ammonium-rich sanitary landfill leachate. Waste Management, 30 (1). pp. 100-109. ISSN 0956-053X

Yusof, Rubiyah and Abdul Rahman, Ribhan Zafira and Khalid, Marzuki (2010) Fault detection and diagnosis for process control rig using artificial intelligent. ICIC Express Letters, 4 (5B). pp. 1811-1816. ISSN 1881-803X

Yusof, Yus Aniza and Ng, S. K. and Chin, Nyuk Ling and A. Talib, Rosnita (2010) Compaction pressure, wall friction and surface roughness upon compaction strength of Andrographis paniculata tablets. Tribology International, 43 (5-6). pp. 1168-1174. ISSN 0301-679X; ESSN: 1879-2464

Zainal Abidin @ Murad, Sumaiya and Abdullah, Luqman Chuah and Koay, Gregory Feng Ling and Ahmad, Salmiah and Choong, Thomas Shean Yaw (2010) Effect of solvent concentration and cooling modes on morphology, particle size distribution, and yield of dihydroxystearic acid (DHSA) crystals. Particulate Science and Technology, 28 (3). pp. 236-246. ISSN 0272-6351; ESSN: 1548-0046

Zamiri, Reza and Zakaria, Azmi and Ahangar, Hossein Abbastabar and Sadrolhosseini, Amir Reza and Mahdi, Mohd Adzir (2010) Fabrication of silver nanoparticles dispersed in palm oil using laser ablation. International Journal of Molecular Sciences, 11 (11). pp. 4764-4770. ISSN 1422-0067

Zamiri, Reza and Zakaria, Azmi and Ahmad @ Ayob, Mansor and Darroudi, Majid and Shameli, Kamyar and Mahdi, Mohd Adzir (2010) Determination of thermal diffusivity of Montmorillonite containing silver nanoparticles. Journal of Optoelectronics and Advanced Materials, 12 (5). pp. 1083-1086. ISSN 1454-4164; ESSN: 1841-7132

Zamiri, Reza and Zakaria, Azmi and Shahriari, Esmaeil and Mat Yunus, Wan Mahmood and Naghavi, Kazem and Saion, Elias and Mahdi, Mohd Adzir and Husin, Mohd Shahril (2010) Dependence of thermal diffusivity on particle size in Au nano-fluid. Optoelectronics and Advanced Materials – Rapid Communications, 4 (10). pp. 1551-1553. ISSN 1842-6573; ESSN: 2065-3824

Zan, Zuraidah and Lowery, Arthur James (2010) Experimental demonstration of a flexible and stable semiconductor laser linewidth emulator. Optics Express, 18 (13). pp. 13880-13885. ISSN 1094-4087

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2010) Residual stress relaxation and surface hardness of a 2024-t351 aluminium alloy. Materials Testing, 52 (9). pp. 632-639. ISSN 0025-5300

Zeyad Assi, Obaid and Sulaiman, Nasri and Marhaban, Mohammad Hamiruce and Hamidon, Mohd Nizar (2010) Implementation of Multistructure PID-like fuzzy logic controller using FPGA. IEICE Electronics Express, 7 (3). pp. 132-137. ISSN 1349-2543

Book

Abdullah, Luqman Chuah and Ismail, Mohd Halim Shah (2010) Hot gas cleaning : particle removal & desulphurisation. Universiti Putra Malaysia Press, Serdang, Selangor. ISBN 9789673441389

Conference or Workshop Item

Ab Kadir, Mohd Zainal Abidin and Cooper, Mary Ann and Gomes, Chandima (2010) An overview of the global statistics on lightning fatalities. In: 30th International Conference on Lightning Protection (ICLP 2010), 13-17 Sept. 2010, Cagliari, Italy. (pp. 1-4).

Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi (2010) New approach in time domain for evaluation of electric and magnetic fields near the lightning channel. In: 30th International Conference on Lightning Protection (ICLP 2010), 13-17 Sept. 2010, Cagliari, Italy. (pp. 1-6).

Abadi, Mohammad Hadi Nezhad Shahrokh and Hamidon, Mohd Nizar and Shaari, Abdul Halim and Abdullah, Norhafizah and Wagiran, Rahman and Misron, Norhisam (2010) Development of nanocrystalline laser ablated thick film array gas sensor. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE 2010), 28-30 June 2010, Melaka, Malaysia. (pp. 88-91).

Abd Rahman, Siti Hajar and A. Talib, Rosnita and Abdan, Khalina and Chin, Nyuk Ling and Yusof, Yus Aniza and Md. Yunos, Khairul Faezah (2010) Composite films from kenaf derived cellulose (KDC) fibers and polylactic acid (PLA). In: 4th World Engineering Congress 2010 (WEC2010), 2-5 Aug. 2010, Kuching, Sarawak, Malaysia. (pp. 6-10).

Abdul Wahab, Noor Izzri and Mohamed, Azah (2010) Transient stability emergency control of power systems employing UFLS combined with generator tripping method. In: 2010 IEEE International Conference on Power and Energy (PECon 2010), 29 Nov.-1 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 426-431).

Abdulrazeg, Aeid Ali and Noorzaei, Jamaloddin and Bayagoob, Khaled Hamood and Jaafar, Mohd Saleh and Mohammed, Thamer Ahmed (2010) Three dimensional modeling of thermal and structural analysis of roller compacted concrete dam. In: 9th International Congress on Advances in Civil Engineering, 27-30 Sep. 2010, Karadeniz Technical University, Trabzon, Turkey. .

Adnan, Sharmeen and Awang Biak, Dayang Radiah (2010) Dielectric effects of bacterial cellulose (BC) impregnated with in-house synthesized carbon nanotubes (CNTs). In: Regional Annual Fundamental Science Symposium 2010 (RAFSS 2010), 8-9 June 2010, Grand Season Hotel, Kuala Lumpur. (pp. 523-529).

Ahmad Ghazali, Lizal Iswady and Abas, Ahmad Fauzi and Wan Adnan, Wan Azizun and Mokhtar, Makhfudzah and Mahdi, Mohd Adzir and Saripan, M. Iqbal (2010) Security proof of improved-SARG04 protocol using the same four qubit states. In: 1st International Conference on Photonics 2010 (ICP 2010), 5-7 July 2010, Langkawi, Kedah. .

Akil, Mustapha and Awang Biak, Dayang Radiah and Ahamad, Intan Salwani and Mohamad, Rosfarizan and Kamarudin, Suryani (2010) The effect of processing parameters on fermentable sugar production from typical Malaysian starch-based waste via acid hydrolysis. In: Regional Annual Fundamental Science Symposium 2010 (RAFSS 2010), 8-9 June 2010, Grand Season Hotel, Kuala Lumpur. (pp. 256-261).

Akorede, Mudathir Funsho and Hizam, Hashim and Aris, Ishak and Ab Kadir, Mohd Zainal Abidin and Pouresmaeil, Edris (2010) Economic viability of distributed energy resources relative to substation and feeder facilities expansion. In: 2010 IEEE International Conference on Power and Energy (PECon 2010), 29 Nov.-1 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 238-242).

Al-Mansoori, Mohammed Hayder and Mahdi, Mohd Adzir and Jamaludin, Md Zaini and Md. Din, Norashidah and Abdullah, Fairuz (2010) Compact long-wavelength band Brillouin-erbium fiber laser in a Fabry-Perot resonator. In: 1st International Conference on Photonics 2010 (ICP 2010), 5-7 July 2010, Langkawi, Kedah. .

Al-Masri, Ahmed Naufal A. and Ab Kadir, Mohd Zainal Abidin and Hizam, Hashim and Mariun, Norman and Yusof, Sallehhudin (2010) Control action based on steady-state security assessment using an artificial neural network. In: 2010 IEEE International Conference on Power and Energy (PECon 2010), 29 Nov.-1 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 706-711).

Al-Surmi, Ibrahim and Othman, Mohamed and Mohd Ali, Borhanuddin (2010) Review on mobility management for future-IP-based next generation wireless networks. In: 12th International Conference on Advanced Communication Technology (ICACT 2010), 7-10 Feb. 2010, Phoenix Park, South Korea. (pp. 989-994).

Alhawari, Adam Reda Hasan and Ismail, Alyani and Mahdi, Mohd Adzir (2010) Compact ultra-wideband metamaterial antenna. In: 16th Asia-Pacific Conference on Communications (APCC 2010), 31 Oct.-3 Nov. 2010 , Auckland, New Zealand. (pp. 64-68).

Ali, ‘Abidah and Abdul Karim, Hezerul and Mohd Arif, Nor Azhar and Sali, Aduwati (2010) Depth image-based spatial error concealment for 3-D video transmission. In: Student Conference on Research and Development (SCOReD 2010), 13-14 Dec. 2010 , Putrajaya, Kuala Lumpur. (pp. 421-425).

Aminian, Masoud and Moazami, Ehsan and Mirzaei, Maryam and Ab Kadir, Mohd Zainal Abidin (2010) A proposed genetic algorithm to optimize service restoration in electrical networks with respect to the probability of transformers failure. In: 2010 IEEE International Conference on Power and Energy (PECon 2010), 29 Nov.-1 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 870-873).

Azhari, and Yunus, Robiah (2010) Synthesis of vegetable alkyl esters by using alkaline catalyst in the presence of alcohol derivatives as excess reactant. In: Aceh Development International Conference 2010, 26-28 Mar. 2010, Faculty of Engineering, Universiti Putra Malaysia. (pp. 834-841).

Bachtiar, Dandi and Salit, Mohd Sapuan (2010) The opportunity of sugar palm fibres in the reinforcing field of polymer composites. In: Aceh Development International Conference 2010, 26-28 Mar. 2010, Faculty of Engineering, Universiti Putra Malaysia. (pp. 847-852).

Bakewell, David J. G. and Chichenkov, Aleksandr and Md Yunus, Nurul Amziah (2010) Models of nanoparticle transport in dielectrophoretic microdevices: prediction, parameter estimation and other applications. In: 2010 IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), 30 Nov.-2 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 188-193).

Balafar, Mohammad Ali and Ramli, Abdul Rahman and Mashohor, Syamsiah and Farzan, Ali (2010) Compare different spatial based fuzzy-C_mean (FCM) extensions for MRI image segmentation. In: 2nd International Conference on Computer and Automation Engineering (ICCAE 2010), 26-28 Feb. 2010, Singapore. (pp. 609-611).

Cortes, Camilo and Santamaria, Francisco and Roman, Francisco and Rachidi, Farhad and Gomes, Chandima (2010) Analysis of wavelet based denoising methods applied to measured lightning electric fields. In: 30th International Conference on Lightning Protection (ICLP 2010), 13-17 Sept. 2010, Cagliari, Italy. (pp. 1-6).

Ee, Gee Keng and Ng, Chee Kyun and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin (2010) Path recovery mechanism in 6LoWPAN routing. In: International Conference on Computer and Communication Engineering (ICCCE 2010), 11-12 May 2010, Kuala Lumpur, Malaysia. .

Eliaderany, Mehrdad Nikbakht and Sayyah, Ali and Zulkifli, Norzima (2010) Hazard identification and accident analysis on city gate station in natural gas industry. In: 2010 International Conference on Environmental Engineering and Applications (ICEEA 2010), 10-12 Sept. 2010, Singapore. (pp. 13-17).

Elmadani, Ahmed Baba and Ramli, Abdul Rahman (2010) Matching fingerface based on area under the highest peaks curve. In: International Conference on Computer and Communication Engineering (ICCCE 2010), 11-12 May 2010, Kuala Lumpur, Malaysia. .

Esfandiari, Ehsan and Mariun, Norman (2010) Multi-winding transformer based diode-clamped multi-level inverter. In: 2010 IEEE Symposium on Industrial Electronics and Applications (ISIEA 2010), 3-5 Oct. 2010, Penang, Malaysia. (pp. 155-158).

Eshkuvatov, Zainidin K. and Ahmedov, Anvarjon and Nik Long, Nik Mohd Asri and Hazaimeh, Oday Shafiq (2010) Approximate solution of nonlinear system of integral equations. In: Regional Annual Fundamental Science Symposium 2010 (RAFSS 2010), 8-9 June 2010, Grand Season Hotel, Kuala Lumpur. (pp. 595-607).

Esmaeilian-Marnani, Aida and Mamdoohi, Ghazaleh and Abas, Ahmad Fauzi and Samsudin, Khairulmizam and Hidayat, Ariya and Ibrahim, Noor Hisham (2010) Strategy on implementing genetic algorithm on FPGA for polarization control application. In: International Conference on Computer and Communication Engineering (ICCCE 2010), 11-12 May 2010, Kuala Lumpur, Malaysia. .

Fadhil, Rahmat and Endan, Johari and Taip, Farah Saleena and Ja'afar, Muhammad Salih (2010) Teknologi sistem akuakultur resirkulasi untuk meningkatkan proouksi perikanan darat di Aceh: suatu tinjauan. In: Aceh Development International Conference 2010, 26-28 Mar. 2010, Faculty of Engineering, Universiti Putra Malaysia. (pp. 826-833).

Fakir, Md. Moslemuddin and Basri, Shahnor and Abu Bakar, Rosli and Rahman, Md Mustafizur (2010) One-dimensional heat transfer in a convection-tip rectangular thin fin: a comparative study. In: Second National Conference in Mechanical Engineering for Research and Postgraduate Studies (2nd NCMER 2010), 3-4 Dec. 2010, UMP Pekan, Pahang. (pp. 12-22).

Farizani, Seyed Reza Kamel Tabbakh and Maarefdoust, Reyhaneh and Ng, Chee Kyun and Mohd Ali, Borhanuddin (2010) Environmental taxonomy of power scavenging techniques for autonomous self powered wireless sensors. In: 2010 Asia Pacific Conference on Circuit and System (APCCAS 2010), 6-9 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 1031-1034).

Farizani, Seyed Reza Kamel Tabbakh and Mohd Ali, Borhanuddin and Khatun, Sabira (2010) Using IP networks as a deviceless storage for future portable computers. In: International Conference on Computer and Communication Engineering (ICCCE 2010), 11-12 May 2010, Kuala Lumpur, Malaysia. .

Farzan, Ali and Nourmohammadi, Ali and Mashohor, Syamsiah and Sadra, Sarvin (2010) Novel voice activity detection based on cepstrum moments. In: 2nd International Conference on Computer and Automation Engineering (ICCAE 2010), 26-28 Feb. 2010, Singapore. (pp. 768-770).

Farzan, Ali and Ramli, Abdul Rahman and Mashohor, Syamsiah and Mahmud, Rozi (2010) Fuzzy modeling of brain tissues in Bayesian segmentation of brain MR images. In: 2010 IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), 30 Nov.-2 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 77-80).

Gomes, Chandima (2010) Modifications proposed to the concepts of structural protection. In: 30th International Conference on Lightning Protection (ICLP 2010), 13-17 Sept. 2010, Cagliari, Italy. (pp. 1-6).

Gomes, Chandima (2010) A tutorial on the selection and installation of surge protection devices in a TT wiring system. In: 30th International Conference on Lightning Protection (ICLP 2010), 13-17 Sept. 2010, Cagliari, Italy. (pp. 1-14).

Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin (2010) Challenges in the promotion of lightning protection know-how in developing world. In: 30th International Conference on Lightning Protection (ICLP 2010), 13-17 Sept. 2010, Cagliari, Italy. (pp. 1-13).

Gomes, Chandima and Cooray, Vernon (2010) Surge protection of low voltage systems and relevant standards. In: 30th International Conference on Lightning Protection (ICLP 2010), 13-17 Sept. 2010, Cagliari, Italy. (pp. 1-8).

Gomes, Chandima and Cooray, Vernon (2010) Transients that may affect low voltage electrical systems. In: 30th International Conference on Lightning Protection (ICLP 2010), 13-17 Sept. 2010, Cagliari, Italy. (pp. 1-13).

Gomes, Chandima and Diego, Arturo Galvan (2010) Lightning protection of communication sites: revisited. In: 30th International Conference on Lightning Protection (ICLP 2010), 13-17 Sept. 2010, Cagliari, Italy. (pp. 1-12).

Gomes, Chandima and Lalitha, Chamath and Priyadarshanee, Chamalee (2010) Improvement of earthing systems with backfill materials. In: 30th International Conference on Lightning Protection (ICLP 2010), 13-17 Sept. 2010, Cagliari, Italy. (pp. 1-9).

Hashim, Shaiful Jahari and Hashmi, Mohammad S. and Benedikt, Johannes and Tasker, Paul J. (2010) Effect of impedance variation around the fundamentals on PA distortions characteristics under wideband multi-tone stimulus. In: 2010 Asia Pacific Conference on Circuit and System (APCCAS 2010), 6-9 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 1115-1118).

Hedayati, Mahdi and Mariun, Norman and Hizam, Hashim and Abdullah, Senan Mahmood (2010) Performance study of drive systems and shunt FACTS for the operation of induction motors. In: 2010 IEEE Symposium on Industrial Electronics and Applications (ISIEA 2010), 3-5 Oct. 2010, Penang, Malaysia. (pp. 463-468).

Hermansson, Ayman William and Syam, Syafiie and Mohd Noor, Samsul Bahari (2010) Multiple model predictive control of nonlinear pH neutralization system. In: IEEE International Conference on Industrial Engineering and Engineering Management (IEEM2010), 7-10 Dec. 2010, Macao, China. (pp. 301-304).

Ho, Angelina Mei Yi and Ahmad, Desa and Mohammud, C. H. (2010) Effect of rhizophere temperature on tomato root volume production. In: International Conference on Agricultural Extension 2010 (AGREX’10): Empowering of Agri-Food Stakesholders in Facing Global Challenges Towards Sustainability, 26-28 Oct. 2010, Palm Garden Hotel, IOI Resort Putrajaya, Malaysia. (pp. 98-105).

Hussain, Siti Aslina and Tan, Hong Tat and Hamid, Mohd Ismail and Abdullah, Norhafizah and Idris, Azni (2010) Numerical Method on Blood Flow Pressure Drop in Aorta Coronary Sinus Conduit. In: 6th International Conference on Diffusion in Solids and Liquids – DSL-2010, 5 - 7 July, 2010, Paris, France. . (Unpublished)

Hussien, Mohamad Naeem and Saripan, M. Iqbal (2010) Computed tomography soft tissue restoration using Wiener filter. In: 2010 IEEE Student Conference on Research and Development (SCOReD 2010), 13-14 Dec. 2010, Palm Garden Hotel, IOI Resort, Putrajaya, Malaysia. (pp. 415-420).

Ismail, Iryane and Anuar, Mohd Shamsul and Shamsudin, Rosnah (2010) Physical properties of Malaysian coffee bean (Coffea Liberica). In: International Conference on Agricultural Extension 2010 (AGREX’10): Empowering of Agri-Food Stakesholders in Facing Global Challenges Towards Sustainability, 26-28 Oct. 2010, Palm Garden Hotel, IOI Resort Putrajaya, Malaysia. (pp. 350-354).

Ismail, Napsiah and Nehzati, Taravatsadat and Rashidi-Bajgan, Hannaneh (2010) Fuzziness in analytic network process under interval numbers for criteria and alternatives. In: 2010 International Conference on Computer Applications and Industrial Electronics (ICCAIE 2010), 5-7 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 222-226).

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin (2010) Considering on charge density along return stroke lightning channel. In: 2010 IEEE International Conference on Power and Energy (PECon 2010), 29 Nov.-1 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 384-389).

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin (2010) Considering on return stroke current wave shape for tall objective cases. In: 2010 IEEE Student Conference on Research and Development (SCOReD 2010), 13-14 Dec. 2010, Palm Garden Hotel, IOI Resort, Putrajaya, Malaysia. (pp. 471-474).

Jaafar, Mohd Saleh and Nordin, N. K. and Wagiran, Rahman and Aziz, A. and Megat Mohd Noor, Megat Johari and Osman, Mohd Rasid and Noorzaei, Jamaloddin and Abdulaziz, Faieza (2010) Assessment Strategy for an Outcome Based Education. In: International Conference on Computing in Civil and Building Engineering, 30 June-2 July 2010, Nottingham, UK. .

Jasni, Jasronita and Siow, Lip Khai and Ab Kadir, Mohd Zainal Abidin and Wan Ahmad, Wan Fatinhamamah (2010) Natural materials as grounding filler for lightning protection system. In: 30th International Conference on Lightning Protection (ICLP 2010), 13-17 Sept. 2010, Cagliari, Italy. (pp. 1-6).

Kazemian, Sina and Kim Huat, Bujang (2010) Assessment of stabilization methods for soft soils by admixtures. In: 2010 International Conference on Science and Social Research (CSSR 2010), 5-7 Dec. 2010, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 118-121).

Khakpour, Reza and Hamidon, Mohd Nizar and Wagiran, Rahman and Bahadorimehr, Alireza (2010) Design of auto control interface circuit for thick film heater gas sensor. In: International Conference on Electronic Devices, Systems and Applications (ICEDSA2010), 12-13 Apr. 2010, Best Western Premier Sri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 101-104).

Khakpour, Reza and Mansouri, Solmaz Rastegar Moghaddam and Bahadorimehr, Alireza (2010) Analytical comparison for square, rectangular and circular diaphragms in MEMS applications. In: International Conference on Electronic Devices, Systems and Applications (ICEDSA2010), 12-13 Apr. 2010, Best Western Premier Sri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 297-299).

M., Sayuti and S., Suraya and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar (2010) Processing and characterisation of particulate reinforced aluminium -11.8% silicon matrix composite. In: Aceh Development International Conference 2010, 26-28 Mar. 2010, Faculty of Engineering, Universiti Putra Malaysia. (pp. 811-817).

Mai, Yoong Ching and Ang, Tun Boon and Chin, Kock Yeong and Rokhani, Fakhrul Zaman (2010) Interconnect area, delay and area-delay optimization for multi-level signaling on-chip bus. In: 2010 Asia Pacific Conference on Circuit and System (APCCAS 2010), 6-9 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 1143-1146).

Mailah, Nashiren Farzilah and Saidin, Mohamad Suhairy and Tuan Othman, Sharifah Sakinah (2010) Simulation and construction of single phase flying capacitor multilevel inverter. In: 2010 IEEE Student Conference on Research and Development (SCOReD 2010), 13-14 Dec. 2010, Palm Garden Hotel, IOI Resort, Putrajaya, Malaysia. (pp. 401-404).

Makhtar, Nor Kamilah and Ismail, Ahmad Rasdan and Jusoh, N. (2010) Thermal comfort in technical school: assessment survey approach. In: Second National Conference in Mechanical Engineering for Research and Postgraduate Studies (2nd NCMER 2010), 3-4 Dec. 2010, UMP Pekan, Pahang. (pp. 732-738).

Makhtar, Nor Kamilah and Ismail, Ahmad Rasdan and Jusoh, N. and A. Perumal, Puvanasvaran (2010) Thermal comfort in technical school: physical measurement approach. In: Second National Conference in Mechanical Engineering for Research and Postgraduate Studies (2nd NCMER 2010), 3-4 Dec. 2010, UMP Pekan, Pahang. (pp. 755-761).

Malekmohammadi, Amin and Abdullah, Mohamad Khazani and Abas, Ahmad Fauzi and Mahdiraji, Ghafour Amouzad (2010) Effect of guard band on the performance of AP-DCDM technique in 40 Gb/s optical fiber communication system. In: 1st International Conference on Photonics 2010 (ICP 2010), 5-7 July 2010, Langkawi, Kedah. .

Masdi, Hendri and Mariun, Norman and Mohamed, Azah and Abdul Wahab, Noor Izzri (2010) Study of impulse voltage distribution in transformer windings. In: 2010 IEEE International Conference on Power and Energy (PECon 2010), 29 Nov.-1 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 379-383).

Mat Jusoh, Rizal and Hamzah, Norhazimi and Marhaban, Mohammad Hamiruce and Alias, Nik Mohd Asrol (2010) Skin detection based on thresholding in RGB and hue component. In: 2010 IEEE Symposium on Industrial Electronics and Applications (ISIEA 2010), 3-5 Oct. 2010, Penang, Malaysia. (pp. 515-517).

Mehrjou, Mohammad Rezazadeh and Mariun, Norman and Marhaban, Mohammad Hamiruce and Misron, Norhisam (2010) Evaluation of Fourier and wavelet analysis for efficient recognition of broken rotor bar in squirrel- cage induction machine. In: 2010 IEEE International Conference on Power and Energy (PECon 2010), 29 Nov.-1 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 740-743).

Mehrjou, Mohammad Rezazadeh and Mariun, Norman and Marhaban, Mohammad Hamiruce and Misron, Norhisam (2010) Fourier analysis of motor current for diagnosis of broken bars in squirrel-cage induction machines. In: 2010 IEEE Student Conference on Research and Development (SCOReD 2010), 13-14 Dec. 2010, Palm Garden Hotel, IOI Resort, Putrajaya, Malaysia. (pp. 475-478).

Misron, Norhisam and Abdullah, Ami Nurul Nazifah and Aris, Ishak and Wakiwaka, Hiroyuki and Nirei, Masami (2010) Effect of magnet size on torque characteristic of three phase permanent magnet brushless DC motor. In: 2010 IEEE Student Conference on Research and Development (SCOReD 2010), 13-14 Dec. 2010, Palm Garden Hotel, IOI Resort, Putrajaya, Malaysia. (pp. 293-296).

Misron, Norhisam and Mtair, Ali Saadon and Raja Othman, Raja Nor Firdaus Kashfi and Aris, Ishak and Bashi, Sinan M. (2010) The three phase rectifier with harmonic injection current. In: 2010 IEEE Student Conference on Research and Development (SCOReD 2010), 13-14 Dec. 2010, Palm Garden Hotel, IOI Resort, Putrajaya, Malaysia. (pp. 397-400).

Mohamed, Mohd Rezal and Mariun, Norman and Aris, Ishak (2010) Simple boost converter using timer IC 555 for charging capacitor banks. In: 2010 IEEE Student Conference on Research and Development (SCOReD 2010), 13-14 Dec. 2010, Palm Garden Hotel, IOI Resort, Putrajaya, Malaysia. (pp. 272-274).

Mohd Sayuti, and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Sulaiman, Suraya and Vijayaram, Thoguluva Raghavan (2010) Mechanical properties of particulate reinforced aluminium alloy matrix composite. In: International Conference on Advances in Materials and Processing Technologies (AMPT2010), 24-27 Oct. 2010, Paris, France. (pp. 86-91).

Mohd Sidek, Roslina and Mohd Yusof, Farah Aniza and Md. Yasin, Faizah and Wagiran, Rahman and Ahmadun, Fakhru'l-Razi (2010) Electrical response of multi-walled carbon nanotubes to ammonia and carbon dioxide. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE 2010), 28-30 June 2010, Melaka, Malaysia. (pp. 263-266).

Mohd Yusuff, Rosnah and Abdullah, Airing Zairose (2010) Prevalence of cumulative trauma disorders among office workers in a semiconductor industry. In: 9th Pan Pacific Conference on Ergonomics (PPCOE 2010), 7-10 Nov. 2010, Kaohsiung, Taiwan. .

Motlagh, Omid Reza Esmaeili and Tang, Sai Hong and Ramli, Abdul Rahman and Ismail, Napsiah and Nakhaeinia, Danial (2010) A novel approach to motion modeling using fuzzy cognitive map and artificial potential fields. In: 11th International Conference on Control, Automation, Robotics and Vision (ICARCV 2010), 7-10 Dec. 2010, Singapore. (pp. 1963-1967).

Muhammad Noor, Ahmad Shukri and Zainal Abidin, Mohd Shahnan and Kawata, Yoshimasa (2010) Two-photon photoluminescence induced defects on InGaN crystal and light emitting diodes. In: 1st International Conference on Photonics 2010 (ICP 2010), 5-7 July 2010, Langkawi, Kedah. .

Murad, Mohd Aminudin and Abd Malek, Mohd Fareq and Ariffin, Rusnani and Wan Ahmad, Wan Fatinhamamah and Usman, Aliyu Danjuma (2010) Thermographic measurements on unrestrained Swiss albino mice exposed to non-ionizing electromagnetic field (EMF) of 2.14 GHz UMTS downlink frequency. In: 2010 IEEE Symposium on Industrial Electronics and Applications (ISIEA 2010), 3-5 Oct. 2010, Penang, Malaysia. (pp. 417-422).

Ng, Wei Lun and Ng, Chee Kyun and Noordin, Nor Kamariah and Rokhani, Fakhrul Zaman and Mohd Ali, Borhanuddin (2010) Home appliances controller using wireless controller area network (WCAN) system. In: International Conference on Computer and Communication Engineering (ICCCE 2010), 11-12 May 2010, Kuala Lumpur, Malaysia. .

Pang, Jia Hong and Sulaiman, Nasri (2010) Design of a reconfigurable FFT processor using multi-objective genetic algorithm. In: International Conference on Intelligent and Advanced Systems (ICIAS 2010), 15-17 June 2010, Kuala Lumpur, Malaysia. .

Pillay, Kanagaraj and Dahidah, Mohamed S. A. and Mariun, Norman (2010) On comparing the performance of voltage source converters based D-STATCOM for voltage sag mitigation. In: 2010 IEEE International Conference on Power and Energy (PECon 2010), 29 Nov.-1 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 432-437).

Rashidi-Bajgan, Hannaneh and Rezaeian, Javad and Nehzati, Taravatsadat and Ismail, Napsiah (2010) A genetic algorithm for capital budgeting problem with fuzzy parameters. In: 2010 International Conference on Computer Applications and Industrial Electronics (ICCAIE 2010), 5-7 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 233-238).

Rastegari, Yousef and Salajegheh, Afshin and Rastegari, Samaneh and Pejman, Emad (2010) Hierarchical architecture as a new approach for building web applications. In: 2010 IEEE International Conference on Software Engineering and Service Sciences (ICSESS), 16-18 July 2010, Beijing, China. (pp. 459-462).

Sargolzaey, Hadi and Khatun, Sabira and Mohd Ali, Borhanuddin and Noordin, Nor Kamariah (2010) Probabilistic route reliability with distance. In: International Conference on Computer and Communication Engineering (ICCCE 2010), 11-12 May 2010, Kuala Lumpur, Malaysia. .

Shamsudin, Rosnah and Chung, Ai Sing and Mohd Adzahan, Noranizan (2010) Storage Effect of Malaysian Cassava (Manihot Esculenta) Root Tubers on the Quality of Chips. In: 1st International Congress on Food Technology 3-6 Nov 2010 Antalya,Turki, 3-6 November 2010, Antalya,Turki. (p. 1).

Supeni, Eris Elianddy and Yusaf, Talal F. and Wandel, Andrew P. and Buttsworth, David Robert and Mat Noor, Muhamad (2010) Experimental and modelinginvestigation of the performance characteristics on diesel HCCI with hydrogen additive- a review. In: Second National Conference in Mechanical Engineering for Research and Postgraduate Studies (2nd NCMER 2010), 3-4 Dec. 2010, UMP Pekan, Pahang. (pp. 580-596).

Syahril, M. and Mohd Isa, Maryam (2010) Current sensing application by using Sigma Delta modulator based in FPGA. In: 2010 IEEE Student Conference on Research and Development (SCOReD 2010), 13-14 Dec. 2010, Putrajaya, Kuala Lumpur. (pp. 352-355).

Syam, Syafiie and Rami, Mustapha Ait and Tadeo, Fernando (2010) Positive infusion of propofol drug during induction. In: International Conference on Industrial and Engineering Management (IEEM 2010), 7-10 Dec. 2010, Macao. (pp. 325-328).

Tan, M. C. and Chin, N. L. (2010) Effect of Ultrasonic Waves on Cake Batter & Properties. In: 15th World Congress of Food Science & Technology, 22-26 Aug 2010, Cape Town, South Africa. .

Wan Ahmad, Wan Fatinhamamah and Abdul Rahman, Mohammad Syafiq and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Hizam, Hashim (2010) Chemical enhancement materials for grounding purposes. In: 30th International Conference on Lightning Protection (ICLP 2010), 13-17 Sept. 2010, Cagliari, Italy. (pp. 1-6).

Yeoh, Chiou Moi and Siew, Wai Lin and Choong, Thomas Shean Yaw and Yunus, Robiah and Abdullah, Luqman Chuah (2010) Kinetic modelling for glycerolysis of palm olein. In: 13th Asia Pacific Confederation of Chemical Engineering Congress (APCChE 2010), 5-8 Oct. 2010, Taipei, Taiwan. (pp. 1-8).

Yousif, Rabi W. and Mohd Ali, Borhanuddin and Abdullah, Mohamad Khazani and Seman, Kamaruzzaman and Baba, Mohd Dani (2010) Wavelength requirements for a scalable multicast single‐hop WDM network. In: 3rd Global Conference on Power Control and Optimization, 2-4 Feb. 2010, Gold Coast, Australia. (pp. 247-253).

Yunus, Robiah and Muhammad Syam, Azhari (2010) Kinetics of transesterification of Jatropha curcas-based triglycerides with an alcohol in the presence of alkaline catalyst. In: 1st International Nuclear and Renewable Energy Conference (INREC10), 21-24 Mar. 2010, Amman, Jordan. (pp. 1-4).

Zainal Abidin, Munira and Shamsudin, Rosnah and Othman, Zaulia and Abdul Rahman, Russly (2010) Physico-chemical changes in cantaloupe variety glamour during storage. In: International Conference on Agricultural Extension 2010 (AGREX’10): Empowering of Agri-Food Stakesholders in Facing Global Challenges Towards Sustainability, 26-28 Oct. 2010, Palm Garden Hotel, IOI Resort Putrajaya, Malaysia. (pp. 628-634).

Zare, Mohammad Reza and Misron, Norhisam and Mariun, Norman and Aris, Ishak and Wakiwaka, Hiroyuki and Nirei, Masami (2010) Optimizing the magnetic dimensions for maximum thrust in high density transverse flux linear motor. In: 2010 IEEE International Conference on Power and Energy (PECon 2010), 29 Nov.-1 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 749-752).

Zareei, Hassan and Mohd Yusuff, Rosnah and Syed Abdul Rashid, Sharifah Norazizan and Hussain, Mohd Rizal (2010) A conceptual framework to determine usability criteria for family of products for older Malaysians. In: 9th Pan Pacific Conference on Ergonomics (PPCOE 2010), 7-10 Nov. 2010, Koahsiung, Taiwan. .

Inaugural Lecture

Kim Huat, Bujang (2010) Problematic soil in search for solution. [Inaugural Lecture]

Kim Huat, Bujang (2010) Problematic soils: in search for solution. [Inaugural Lecture]

Mahdi, Mohd Adzir (2010) Light speed: catch me if you can. [Inaugural Lecture]

Mansor, Shattri (2010) Google the earth: what's next? [Inaugural Lecture]

Salit, Mohd Sapuan (2010) Concurrent engineering for composites. [Inaugural Lecture]

Patent

Khalina Abdan (2010) A method for forwarding materials. UNSPECIFIED.

Luqman Chuah Abdullah (2010) Method of adsorbing dye in aqueous solution. PI2010005028.

Luqman Chuah Abdullah (2010) A composite composition. PI2010004392.

Norhafizah Abdullah (2010) Bacteria for the degradation and modification of fats, oils, and grease. PI2010005193.

Abd. Rahim Abu Talib (2010) Non-penetrative blood container and apparatus for vacuuming the same. PI2010700039.

Desa Ahmad (2010) A fibrous crops harvesting system. PI2010003686.

Desa Ahmad (2010) An apparatus for tilling soil. PI2010004802.

Fakhru'l-Razi Ahmadun (2010) Liquid State Bioconversion of Sewage Treatment Plant Sludge. UNSPECIFIED.

Fakhru'l-Razi Ahmadun (2010) Bio-dewatering by liquid state bioconversion process of sewage treatment plant sludge under natural conditions. PI2010006186.

Fakhru'l-Razi Ahmadun (2010) Cellulase immobilized on a composite carrier. PI2010003276.

Fakhru'l-Razi Ahmadun (2010) Synthesized tin-activated carbon adsorbent and its application in pressure swing adsorption for purification of hydrogen gas. UNSPECIFIED.

Aidy Ali (2010) Ballistic resistant laminate. PI2010005286.

Chin Nyuk Ling (2010) A method and apparatus for high intensity ultrasonic treatment Of baking materials. PI2010004677.

Luqman Chuah Abdullah (2010) Synthesis of nanometer-sized ceramic particles. PI2010006072.

Chandima Gomes (2010) Horizontal grounding system. PI2010006071.

Chandima Gomes (2010) A vertical grounding apparatus. PI2010003832.

Mohd Saleh Jaafar (2010) A system to administer an outcome based education. UNSPECIFIED.

Ling Tau Chuan (2010) Lipase purification. PI2010005132.

Ling Tau Chuan (2010) Purification of antibodies against hepatitis B. PI2010005910.

Mohd Adzir Mahdi (2010) A polarization independent tunable filter. PI2010005953.

Norhisam Misron (2010) A hybrid transverse flux linear motor. PI 2010700103.

Abdul Rashid Mohamed Sharif (2010) Fruit ripeness grading system. PI2010700069.

Abdul Rashid Mohamed Sharif (2010) A method Of visualizing 3D terrain. PI2010700076.

Abdul Rashid Mohamed Sharif (2010) Web DSS for paddy precision farming. PI2010700091.

Abdul Rashid Mohamed Sharif (2010) Web based agricultural data management system and methods of managing thereof. PI2010700091.

Abdul Rashid Mohamed Sharif (2010) A system for fruit grading & quality determination. PI2010700086.

Borhanuddin Mohd. Ali (2010) Client/server architecture having a dynamic and transparent middle tier. UNSPECIFIED.

Borhanuddin Mohd. Ali (2010) A concatenated multi-dimentional signal modulation transmitter and receiver system and a method thereof. UNSPECIFIED.

Mohd Amin Mohd Soom (2010) An optimum watershed management system and a method thereof. PI2010002627.

Siti Mazlina Mustapa Kamal (2010) An automated blender-cooker for paste making. PI2010003372.

Jamaloddin Noorzaei (2010) Method and system for determining the number and position of damping elements of building structures. UNSPECIFIED.

Jamaloddin Noorzaei (2010) A method of evaluating safety Of construction Of infrastructure. PI2010700075.

Barkawi Sahari (2010) Compressed natural gas fuel injection system and method. UNSPECIFIED.

Rosnah Shamsuddin (2010) Machine for making jam. UNSPECIFIED.

Rosnah Shamsuddin (2010) A cookie forming machine. PI2010004452.

Rosnah Shamsuddin (2010) A cooking machine. UNSPECIFIED.

Rosnah Shamsuddin (2010) A crunched seed preparation system. PI2010002417.

Tey Beng Ti (2010) A method for control proteolytic degradation of recombinant proteins. PCT/MY2009/000105.

Wan Ishak Wan Ismail (2010) A method of predicting oil content of oil palm fruit and a device for performing the same. PI2010006305.

Wan Ishak Wan Ismail (2010) Climbing machine for pole-like object. PI2010005773.

Wong Shaw Voon (2010) Artificial intelligence device and corresponding methods for selecting machinability data. PI20024308.

Robiah Yunus (2010) Palm oil based trimethylolropane esters. UNSPECIFIED.

Thesis

Abadi, Mohammad Hadi Nezhad Shahrokh (2010) Development of nanocrystalline thick film gas sensors. PhD thesis, Universiti Putra Malaysia.

Abd, Mothanna Yasen (2010) Vibration analysis of simply supported beam-type vibration absorber. Masters thesis, Universiti Putra Malaysia.

Abd. Rahman, Mohamed (2010) Physical, mechanical and thermal properties of pineapple leaf fibers and PALF-reinforced vinyl ester composites. PhD thesis, Universiti Putra Malaysia.

Abdolshah, Mohamad (2010) Development of a fuzzy loss-based process capability index. PhD thesis, Universiti Putra Malaysia.

Abdul Hamid, Aziana Azlin (2010) The effect of binders on mechanical and physical properties of Eurycoma longifolia jack extract under dry compression. Masters thesis, Universiti Putra Malaysia.

Abdul Razak, Norawanis (2010) Compression characteristics of Andrographis paniculata herbal plant extract. Masters thesis, Universiti Putra Malaysia.

Abdullah, Rohaiza (2010) Effects of glazes on the keeping quality of bread. Masters thesis, Universiti Putra Malaysia.

Ahmad, Harlina (2010) Sewage characterization and insewer transformation of selected determinants. PhD thesis, Universiti Putra Malaysia.

Ahmad Hambali, Nor Azura Malini (2010) Single-wavelength ring-cavity fiber laser with improved tunability based on nonlinear stimulated Brillouin scattering. PhD thesis, Universiti Putra Malaysia.

Ajiya, Mohammed (2010) Multiple wavelength laser utilizing hybrid erbuim and brillouin gains in dispersion compensating fiber. PhD thesis, Universiti Putra Malaysia.

Al-Ansi, Abdulwahab Mujahed Hasan (2010) Decision support system for optimal design and operation of ponds for watershed runoff management. PhD thesis, Universiti Putra Malaysia.

Al-Faqheri, Wisam Salah (2010) Real-time Malaysian automatic license plate recognition using hybrid fuzzy logic with skew detection and correction method. Masters thesis, Universiti Putra Malaysia.

Al-Harbawi, Mostafa Kamil Abdulhusain (2010) Improved tree routing protocol in zigbee networks. Masters thesis, Universiti Putra Malaysia.

Al-Maweri, Nasr Addin Ahmed Salem (2010) Runtime pluggable CPU scheduler for linux operating system. Masters thesis, Universiti Putra Malaysia.

Al-Sweedy, Ali Faik Tawfiq (2010) Reduction of bird pest in electrical power substations using sonic devices. Masters thesis, Universiti Putra Malaysia.

Alfraihat, Wasan Ahmad Sulieman (2010) Multi-channel support for data-gathering trees in wireless sensor networks. Masters thesis, Universiti Putra Malaysia.

Ali, Hazem I. (2010) Design of low order quantitative feedback theory and H-infinity-based controllers using particle swarm optimisation for a pneumatic actuator system. PhD thesis, Universiti Putra Malaysia.

Alsultaney, Hazem K. (2010) Tool path cutting strategy for milling aircraft components using aluminium 7050. Masters thesis, Universiti Putra Malaysia.

Asadi, Afshin (2010) Electro-osmotic properties and effects of pH on geotechnical behaviour of peat. PhD thesis, Universiti Putra Malaysia.

Atiyah, Mahmood Rashid (2010) Low-temperature synthesis of carbon nanotubes via floating catalyst-chemical vapor deposition method. Masters thesis, Universiti Putra Malaysia.

Bagh, Mohammad Golestan (2010) Evaluation of turbidity removal using Moringa oleifera lam. seeds. Masters thesis, Universiti Putra Malaysia.

Baker, Alaa M. (2010) Enhanced algorithm for energy-saving mechanism and frame response time reduction in IEEE 802.16e WiMAX. Masters thesis, Universiti Putra Malaysia.

Chong, Fui Chin (2010) Chromatographic Purification of Recombinant Nucleocapsid Protein of Nipah Virus from Escherichia Coli Homogenate. PhD thesis, Universiti Putra Malaysia.

Chong, Jin Hui (2010) Dynamic transmit antenna shuffling scheme for hybrid multiple-input multiple-output in layered architecture. PhD thesis, Universiti Putra Malaysia.

Choy, Wai Kent (2010) Structural behavior of strengthened interlocking load-bearing hollow block wall with opening subjected to axial and seismic loads. Masters thesis, Universiti Putra Malaysia.

Danafar, Firoozeh (2010) Fluidized bed chemical vapor deposition synthesis of carbon nanotubes and its application for cellulase immobilization. PhD thesis, Universiti Putra Malaysia.

Darestani, Soroush Avakh (2010) Statistical monitoring of supplier performance in a quality management system environment for the Iranian automotive industry. PhD thesis, Universiti Putra Malaysia.

Esmaeilian, Gholamreza (2010) Development of a heuristic procedure for balancing mixed-model parallel assembly line type II. PhD thesis, Universiti Putra Malaysia.

Faizal Wong, Fadzlie Wong (2010) Simple surface plasmon resonance bio-sensor for the quantification of recombinant human epidermal growth factor (rhEGF) in expanded bed recovery. Masters thesis, Universiti Putra Malaysia.

Farashahi, Hamid Ghaani (2010) Flexible job shop scheduling using priority heuristics and genetic algorithm. Masters thesis, Universiti Putra Malaysia.

Firouzi, Amin (2010) Effect of gas adsorption on electrical resistance of carbon nanotubes. Masters thesis, Universiti Putra Malaysia.

Galavi, Hadi (2010) Time series modeling of water level at Sulaiman Station, Klang River, Malaysia. Masters thesis, Universiti Putra Malaysia.

Gharahvaran, Arash Assadzadeh (2010) Design of profile controller for biochemical reactor. Masters thesis, Universiti Putra Malaysia.

Goodarzi, Ehsan (2010) Overtopping risk and uncertainty analysis of embankment dams. PhD thesis, Universiti Putra Malaysia.

Hamid, Md. Akhir (2010) Design and development of a digging device for harvesting sweet potato. PhD thesis, Universiti Putra Malaysia.

Hasany, Syed Muhammad Noman (2010) Keyword query processing interface model of ontological natural language manipulation. PhD thesis, Universiti Putra Malaysia.

Hassan, Hur A. (2010) Design of a 1.8v successive approximation register analog-to-digital converter with low noise. Masters thesis, Universiti Putra Malaysia.

Heidarpour, Farideh (2010) Fabrication and testing of nano silver-coated filters for water treatment. Masters thesis, Universiti Putra Malaysia.

Hosseini, Majid (2010) Effect of land use change on water balance and suspended sediment yield of Taleghan catchment, Iran. PhD thesis, Universiti Putra Malaysia.

Hosseini, Maryam (2010) Experimental determination of fatigue life for international rubber hardness degree 60 engine mount rubber. Masters thesis, Universiti Putra Malaysia.

Hussein, Alaa Raad (2010) Effect of vibration frequencies on the welding properties of rectangular mild steel plate. Masters thesis, Universiti Putra Malaysia.

Hussein, Amar Ali (2010) Numerical performance evaluation of plain fin tube heat exchanger under frosty conditions. Masters thesis, Universiti Putra Malaysia.

Hussein, Basheer Noaman (2010) Design of robust particle swarm optimization - tuned fuzzy controller for a Single Axis Small Magnetic Levitation System. Masters thesis, Universiti Putra Malaysia.

Ismail, Abdul Halim (2010) Automated approach for oil palm in vitro shoot classification. Masters thesis, Universiti Putra Malaysia.

Ismail, Siti Norazian (2010) Investigation of floating catalyst CVD for development of CNT-coated carbon fibre reinforced composite. Masters thesis, Universiti Putra Malaysia.

Izadi, Mahdi (2010) Improved algorithm for evaluation of lightning induced overvoltage on distribution lines. Masters thesis, Universiti Putra Malaysia.

Jalalian, Afsaneh (2010) Cellular automation for efficient impulse noise removal and edge detection using graphic processor unit. Masters thesis, Universiti Putra Malaysia.

Jasni, Jasronita (2010) Application of Krylov Subspace methods for solving Continuous Power Flow problem in voltage stability analysis of power system. Doctoral thesis, Universiti Putra Malaysia.

Jawad, Mohamed Hassan Izzaldeen (2010) Network reconfiguration and control for loss reduction using genetic algorithm. Masters thesis, Universiti Putra Malaysia.

Kalantari, Behzad (2010) Stabilization of Tropical Fibrous Peat Using Ordinary Portland Cement and Additives. PhD thesis, Universiti Putra Malaysia.

Keramati, Ehsan (2010) Traditional and higher order sliding mode control of MEMS optical switch. Masters thesis, Universiti Putra Malaysia.

Khakpour, Reza (2010) Development of auto-calibrated interfacing circuit for thick film multi-gas sensor. Masters thesis, Universiti Putra Malaysia.

Kojouri, Samira Jilani (2010) Seismic assessment and strenghthening of existing residential reinforced concrete buildings. Masters thesis, Universiti Putra Malaysia.

Kok, Sien Ti (2010) Analysis and design of passive pile in open excavation. PhD thesis, Universiti Putra Malaysia.

Lotfiman, Samaneh (2010) Bacterial cellulose production from extracted date syrup. Masters thesis, Universiti Putra Malaysia.

Mafian, Sasan (2010) Species screening and evaluation of live pole technique for slope stabilization in tropical environment. Masters thesis, Universiti Putra Malaysia.

Mahmoudian, Sayed Hamid (2010) Prediction of breast cancer relapse time in continuous scale based on type-2 TSK fuzzy model. PhD thesis, Universiti Putra Malaysia.

Mailah, Nashiren Farzilah (2010) Simulation and Development of Unified Power Flow Controller Using Multilevel Inverter. PhD thesis, Universiti Putra Malaysia.

Md Salleh, Liza (2010) Extraction of bioactive flavonoid compounds from pecah kaca (strobilanthes crispus) using supercritical carbon dioxide. PhD thesis, Universiti Putra Malaysia.

Mekanik, Fatemeh (2010) Rainfall time series modeling for a mountainous region in West Iran. Masters thesis, Universiti Putra Malaysia.

Mirjalili, Fatemeh (2010) Preparation and characterization of α-alumina nanoparticles and α-alumina-based polypropylene nanocomposites. PhD thesis, Universiti Putra Malaysia.

Mohamad, Mahmod Abd Hakim bin (2010) One-dimension high-order compact method for solving euler's equation. Masters thesis, Universiti Putra Malaysia.

Mohamady, Samira (2010) Numerical modeling and minimization of enclosure interior noise using local active sound control. Masters thesis, Universiti Putra Malaysia.

Mohamed Rasin, Mohamad Zaihirain (2010) Development of early order stage cost estimation models for sheet metal component. PhD thesis, Universiti Putra Malaysia.

Mohd Nasir, Norlirubayah (2010) Decolorization and decomposition of textile wastewater using a combination of electron beam irradiation and activated sludge processes. Masters thesis, Universiti Putra Malaysia.

Mohd Yusoff, Badli Shah (2010) Critical success factors of total productive maintenance implementation in Malaysian automotive SMEs. Masters thesis, Universiti Putra Malaysia.

Najafi, Assal Haj (2010) Osmotic dehydration combined with air drying of red pitaya fruit cubes. Masters thesis, Universiti Putra Malaysia.

Ngu, Jenney Lim Song (2010) Characterization of mechanical, morphological and thermal properties of low density polyethylene nanocomposite using alumina nano-particles as filler. Masters thesis, Universiti Putra Malaysia.

Nik Abdullah, Nik Aizan (2010) Design and fabrication of laminated veneer lumber classroom chair. Masters thesis, Universiti Putra Malaysia.

Obaid, Zeyad Assi (2010) Design of field programmable gate array-based proportional-integral-derivative fuzzy logic controller with tunable ganin. Masters thesis, Universiti Putra Malaysia.

Omar, Rozita (2010) Evaluation of microwave pyrolysis of oil palm empty fruit bunches. PhD thesis, Universiti Putra Malaysia.

Pakravan, Amir (2010) Computational study on turbulent flow around a model of wind turbine rotor. Masters thesis, Universiti Putra Malaysia.

Parvaneh, Parisa (2010) Gis-based modelling of the changes in water level due to flood walls. Masters thesis, Universiti Putra Malaysia.

Pendashteh, Alireza (2010) Treatment of oilfield-produced water using biological and membrane processes. PhD thesis, Universiti Putra Malaysia.

Poi, Alvin Wai Hoong (2010) Conflict count between school children and motorized traffic around traffic-calmed school areas. Masters thesis, Universiti Putra Malaysia.

Pour, Parviz Moradi (2010) A numerical time integration mrthod for nonlinear seismic response analysis of roller-compacted concrete dams. Masters thesis, Universiti Putra Malaysia.

Qasem, Yaaqob Ali Ahmed (2010) Interference avoidance routing and scheduling using multiple transceivers for IEEE 802.16 mesh network. Masters thesis, Universiti Putra Malaysia.

Rad, Habibollah Arasteh (2010) Development of mobile road traffic infraction registration system. Masters thesis, Universiti Putra Malaysia.

Raminfar, Reza (2010) Development of an integrated model for production planning and cell formation in cellular manufacturing systems. Masters thesis, Universiti Putra Malaysia.

Sahbudin, Ratna Kalos Zakiah (2010) Hybrid subcarrier - optical spectrum code division multiplexing system with spectral direct decoding detection technique. PhD thesis, Universiti Putra Malaysia.

Saniei, Soodeh Zahab (2010) Improved receiver system for laser range finder. Masters thesis, Universiti Putra Malaysia.

Sanusi, Rasidah (2010) Design of silicon nitride metal-insulator-metal capacitor using 0.15 um gallium arsenide technology. Masters thesis, Universiti Putra Malaysia.

Sedehi Esfahani, Mohammad Tolou Askari (2010) Using a dynamic thermal model approach to estimate loss of life of mineral oil-immersed transformers. Masters thesis, Universiti Putra Malaysia.

Seyed, Shahabeddin Nehzati (2010) Modeling and simulation of fluidized bed gasifier of biomass. Masters thesis, Universiti Putra Malaysia.

Shareef, Wessam Zayd (2010) Miniaturization of microstrip and cpw-fed uwb printed antennas with band rejection characteristics. Masters thesis, Universiti Putra Malaysia.

Shokripour, Hamed (2010) Design and development of self-balancing climbing machine for oil palm harvesting. Masters thesis, Universiti Putra Malaysia.

Sichani, Mohammadmehdi Shahzamanian (2010) Thermomechanical behavior of functionally graded disk subjected to contact conditions. Masters thesis, Universiti Putra Malaysia.

Sulaiman, Alawi (2010) Enhanced biomethanation of palm oil mill effluent during anaerobic treatment in a closed digester tank. PhD thesis, Universiti Putra Malaysia.

Tavangar, Leila (2010) Modelling an inventory management system using a system dynamic approach. Masters thesis, Universiti Putra Malaysia.

Toudeshki, Arash Mohammadi (2010) Development of variable high frequency voltage source for ohmic heating process. Masters thesis, Universiti Putra Malaysia.

Varahram, Pooria (2010) Power Amplifiers Linearization Based On Complex Gain Memory Predistortion. PhD thesis, Universiti Putra Malaysia.

Wongchuphan, Rattana (2010) Development of dye affinity adsorbents for recovery of polyclonal anti-hepatitis B core antigen immunoglobulin G. Masters thesis, Universiti Putra Malaysia.

Yeoh, Chiou Moi (2010) Production of diacylglycerol from palm olein using enzymatic glycerolysis and its recovery. PhD thesis, Universiti Putra Malaysia.

Yeoh, Chui Yen (2010) Composting of empty fruit bunches by microbial inocular. Masters thesis, Universiti Putra Malaysia.

Zadeh, Maryam Rahmati (2010) Adsorption potential of kenaf for copper and nickel removal from aqueous solution. Masters thesis, Universiti Putra Malaysia.

Ziaei, Mina (2010) Simulated optimization of reservoir operations of the Zayandehrud dam, Iran. Masters thesis, Universiti Putra Malaysia.

This list was generated on Fri Apr 26 21:13:44 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0