Items where Division is "Faculty of Engineering" and Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Author | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | R | S | T | V | W | Y | Z
Number of items: 217.

A

A. ElSheikh, R. F. and Ahmad, Nordin and Mohamed Shariff, Abd Rashid and Balasundram, Siva K. and Yahaya, S. (2010) An agricultural investment map based on geographic information system and multi-criteria method. Journal of Applied Sciences, 10 (15). pp. 1596-1602. ISSN 1812-5654; ESSN: 1812-5662

A. S., Farahani and Adam, Nor Mariah and Mohd Ariffin, Khairol Anuar (2010) Simulation of Airflow and Aerodynamic Forces Acting on a Rotating Turbine Ventilator. American Journal of Engineering and Applied Sciences, 3 (1). pp. 159-170. ISSN 1941-7020

Ab Kadir, Mohd Zainal Abidin and Cotton, I. (2010) Application of the insulator coordination gap models and effect of line design to backflashover studies. International Journal of Electrical Power & Energy Systems, 32 (5). pp. 443-449. ISSN 0142-0615

Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Wan Ahmad, Wan Fatinhamamah and Izadi, Mahdi (2010) An Analytical Second-FDTD Method For Evaluation of Electric and Magnetic Fields at Intermediate Distances From Lightning Channel. Progress In Electromagnetics Research (PIER), 110 . pp. 329-352. ISSN 1559-8985

Ab Kadir, Mohd Zainal Abidin and Hizam, Hashim and Jasni, Jasronita and Mariun, Norman and Khairudin, Azhar (2010) Enhancement in Static Security Assessment for a Power System Using an Optimal Artificial Neural Network. International Review of Electrical Engineering (IREE), 5 (3). pp. 1095-1102. ISSN 1827-6660

Ab Kadir, Mohd Zainal Abidin and Mohd Nawi, Zawati and Sardi, Junainah (2010) Numerical Modeling And Simulation In Electromagnetic Transient Program For Estimating Line Backflashover Performance. IAENG-Engineering Letters, 18 (4). pp. 351-356. ISSN 1816-093X

Ab Kadir, Mohd Zainal Abidin and Mohd Nowi, Zawati and Misbah, Nor Ratna (2010) A Critical Review on the Contamination Effect on Distribution Overhead Lines. International Review of Electrical Engineering, 5 (5). pp. 2461-2470. ISSN 1827-6660

Ab Kadir, Mohd Zainal Abidin and Rafeeu, Yaaseen (2010) A Review on Factors for Maximizing Solar Fraction Under Wet Climate Environment in Malaysia. Renewable and Sustainable Energy Reviews, 14 (8). pp. 2243-2248. ISSN 1364-0321

Ab Kadir, Mohd Zainal Abidin and Rafeeu, Yaaseen and Adam, Nor Mariah (2010) Prospective scenarios for the full solar energy development in Malaysia. Renewable and Sustainable Energy Reviews, 14 (9). pp. 3023-3031. ISSN 1364-0321

Ab. Aziz, Norashikin (2010) Continuous Flow Experimental Set-Up for Fouling Deposit Study. World Academy of Science, Engineering and Technology, 68 . pp. 1312-1315.

Ab. Rashdi, Abdalla A. and Salit, Mohd Sapuan and Abdan, Khalina and Megat Ahmad, Megat Mohamad Hamdan (2010) The effects of weathering on mechanical properties of kenaf unsaturated polyester composites (KFUPC). Polymers and Polymer Composites, 18 (6). pp. 337-343. ISSN 0967-3911; ESSN: 1478-2391

Ab. Rashdi, Abdalla A. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Abdan, Khalina (2010) Combined Effects Of Water Absorption Due To Water Immersion, Soil Buried And Natural Weather On Mechanical Properties Of Kenaf Fibre Unsaturated Polyester Composites (KFUPC). International Journal of Mechanical and Materials Engineering, 5 (1). pp. 11-17. ISSN 1823-0334

Abd Aziz, Samsuzana and Steward, Brian L. and Karkee, Manoj (2010) Using spatial uncertainty of prior measurements to design adaptive sampling of elevation data. Transactions of the ASABE, 53 (2). pp. 349-357. ISSN 2151-0032; ESSN: 2151-0040

Abd Hamid, Hamidah and Yunus, Robiah and Choong, Thomas Shean Yaw (2010) Utilization of MATLAB to Simulate Kinetics of Transesterification of Palm Oil-Based Methyl Esters with Trimethylolpropane for Biodegradable Synthetic Lubricant Synthesis. Chemical Product and Process Modeling, 5 (1). ISSN 1934-2659

Abd Rahman, Nur 'Aliaa and Mustapa Kamal, Siti Mazlina and Taip, Farah Saleena and Abdullah, Abdul Ghani Liew (2010) Response Surface Optimization For Clarification Of White Pitaya Juice Using A Commercial Enzyme. Journal of Food Process Engineering, 33 (2). pp. 333-347. ISSN 0145-8876

Abd. Rahman, Mohamed (2010) Physical, mechanical and thermal properties of pineapple leaf fibers and PALF-reinforced vinyl ester composites. PhD thesis, Universiti Putra Malaysia.

Khalina Abdan (2010) A method for forwarding materials.

Abdul Hamid, Aziana Azlin (2010) The effect of binders on mechanical and physical properties of Eurycoma longifolia jack extract under dry compression. Masters thesis, Universiti Putra Malaysia.

Abdul Malik Thanoon, Huda and Jaafar, Mohd Saleh and Noorzaei, Jamaloddin and Thanoon, Waleed Abdulmalik and Mohammed, Thamer Ahmed (2010) Modelling the Effects of Sediment on the Seismic Behaviour of Kinta Roller Compacted Concrete Dam. Pertanika Journal of Science & Technology, 18 (1). pp. 43-59. ISSN 0128-7680

Abdul Razak, Norawanis (2010) Compression characteristics of Andrographis paniculata herbal plant extract. Masters thesis, Universiti Putra Malaysia.

Abdul Wahab, Noor Izzri and Mohamed, Azah (2010) Transient stability emergency control using generator tripping based on tracking area-based rotor angle combined with UFLS. International Review of Electrical Engineering, 5 (5). pp. 2317-2326. ISSN 1827-6660

Abdullah, Luqman Chuah and Muhammad, and Jamari, Saidatul Shima and Choong, Thomas Shean Yaw (2010) Modelling of Single and Binary Adsorptions of Heavy Metals Onto Activated Carbon - Equilibrium Studies. Pertanika Journal of Science & Technology, 18 (1). pp. 83-93. ISSN 0128-7680

Abdullah, Nadia and Abu Talib, Abd. Rahim and Jaafar, Abdul Aziz and Mohd Salleh, Mohamad Amran and Chong, W.T. (2010) The basics and issues of Thermochromic Liquid Crystal Calibrations. Experimental Thermal and Fluid Science, 34 (8). pp. 1089-1121. ISSN 0894-1777

Abdullah , Norazlin and Chin , Nyuk Ling (2010) Simplex-centroid mixture formulation for optimised composting of kitchen waste. Bioresource Technology, 101 (21). pp. 8205-8210. ISSN 0960-8524

Abdulrazeg, Aeid Ali and Noorzaei, Jamaloddin and Bayagoob, Khaled Hamood and Jaafar, Mohd Saleh and Mohammed, Thamer Ahmed (2010) Three dimensional modeling of thermal and structural analysis of roller compacted concrete dam. In: 9th International Congress on Advances in Civil Engineering, 27-30 September 2010, Karadeniz Technical University, Trabzon, Turkey.

Abdur Rahman, Mohamed and Salit, Mohd Sapuan and Abdan, Khalina (2010) Selected properties of hand-laid and compression molded vinyl ester and pineapple leaf fiber (PALF)-reinforced vinyl ester composites. International Journal of Mechanical and Materials Engineering , 5 (1). pp. 68-73. ISSN 1823-0334

Abu Talib, Abdul Rahim and Ali, Aidy and Badie, Mohamed A. and Che Lah, Nur Azida and Golestaneh, Amirreza Fahim (2010) Developing a hybrid, carbon/glass fiber-reinforced, epoxy composite automotive drive shaft. Materials and Design, 31 (1). pp. 514-521. ISSN 0264-1275

Abu Talib, Abdul Rahim and Ali, Aidy and Soliman Mosleh Hamdan, Gehad Goudah and Che Lah, Nur Azida (2010) Developing a composite based elliptic spring for automotive applications. Materials & Design, 31 (1). pp. 475-484. ISSN 0261-3069

Abubakar, Mohammed Shu'aibu and Ahmad, Desa (2010) Pattern of Energy Consumption in Millet Production for Selected Farms in Jigawa, Nigeria. Australian Journal of Basic and Applied Sciences, 4 (4). pp. 665-672. ISSN 1991-8178

Abubakar, Mohammed Shu'aibu and Ahmad, Desa and Othman, Jamarei and Sulaiman, Shamsudin (2010) Mechanical Properties of Paddy Soil in Relation to High Clearance Vehicle Mobility. Australian Journal of Basic and Applied Sciences, 4 (5). pp. 906-913. ISSN 1991-8178

Abubakar, Mohammed Shu’aibu and Ahmad, Desa and Bukola Akande, Fatai (2010) A Review of Farm Tractor Overturning Accidents and Safety. Pertanika Journal of Science & Technology, 18 (2). pp. 377-385. ISSN 0128-7680

Abubakar, Mohammed Shu'aibu and Umar, B. and Ahmad, Desa (2010) Energy Use Patterns in Sugar Production: A case study of Savannah Sugar Company, Numan, Adamawa State, Nigeria. Journal of Applied Sciences Research , 6 (4). pp. 377-382. ISSN 1816-157X

Ahmad, Desa and Abubakar, Mohammed Shu'aibu (2010) Utilization of and Constraints on Animal Traction in Jigawa State, Nigeria. Australian Journal of Basic and Applied Sciences, 4 (6). pp. 1152-1156. ISSN 1991-8178

Ahmad, Harlina (2010) Sewage characterization and insewer transformation of selected determinants. PhD thesis, Universiti Putra Malaysia..

Ahmad Anas, Siti Bariah and Quinlan, Terence J. and Walker, Stuart D. (2010) Service differentiated drop code unit for metro ring optical networks. IET Optoelectron, 4 (1). pp. 46-50. ISSN 1751-8768

Ahmad Hambali, Nor Azura Malini and Mahdi, Mohd Adzir and Al-Mansoori, Mohammed Hayder and Saripan, M. Iqbal and Abas, Ahmad Fauzi and Ajiya, M. (2010) Single-wavelength ring-cavity Brillouin-Raman fiber laser. Laser Physics Letters, 7 (6). pp. 454-457. ISSN 1612-2011

Fakhru`l Razi Ahmadun (2010) Liquid State Bioconversion of Sewage Treatment Plant Sludge.

Fakhru`l Razi Ahmadun (2010) Synthesized tin-activated carbon adsorbent and its application in pressure swing adsorption for purification of hydrogen gas.

Ahmedov, Anvarjon (2010) The generalized principle of localization for the N-fold fourier integrals. Malaysian Journal of Mathematical Sciences , 4 (2). pp. 209-225. ISSN 1823-8343

Akorede, Mudathir F. and Hizam, Hashim and Aris, Ishak and Ab Kadir, Mohd Zainal Abidin (2010) Re-Emergence of Distributed Generation in Electric Power Systems: Incentives, Values and Issues. Energy and Environment, 21 (2). pp. 75-92. ISSN 0958-305X

Akorede, Mudathir Funsho and Hizam, Hashim and Pouresmaeil, Edris (2010) Distributed energy resources and benefits to the environment. Renewable and Sustainable Energy Reviews, 14 (2). pp. 724-734. ISSN 1364-0321

Akorede, Mudathir Funsho and Hizam, Hashim and Pouresmaeil, Edris (2010) Distributed energy resources and benefits to the environment. Renewable and Sustainable Energy Reviews, 14 (2). pp. 724-734. ISSN 1816-157X

Al-Hamati, Abdullah A. N. and Mohammed, Thamer Ahmed and Ghazali, Abdul Halim (2010) Determination of storage volume required in a sub-surface stormwater detention/retention system. Journal of Hydro-environment Research, 4 (1). pp. 47-53. ISSN 1570-6443

Al-Mansoori, Mohammed Hayder and Mahdi, Mohd Adzir and Jamaludin, Md Zaini and Din, N. M. and Abdullah , F. (2010) Enhancement of Brillouin gain efficiency in multiwavelength L-band BEFL by utilizing bi-directional Brillouin pump amplification. International Journal of Wavelets Multiresolution and Information Processing, 27 (7). pp. 1332-1336. ISSN 0219-6913

Al-Shamiry, Faisal Mohammed Seif and Ahmad, Desa (2010) Development and Validation of a Mathematical Model for Ventilation Rate in Crop Protection Structures. Pertanika Journal of Science & Technology, 18 (1). pp. 111-120. ISSN 0128-7680

Ali, Aidy and Fouladi, Mohammad Hosseini and Sahari, Barkawi (2010) A Review of Constitutive Models for Rubber-Like Materials. American J. of Engineering and Applied Sciences, 3 (1). pp. 232-239. ISSN 1941-7020

Ali, Aidy and Sanuddin, Asmawi and Ezzeddin, Saifuliwan (2010) The effect of aging on Arenga pinnata fiber-reinforced epoxy composite. Materials and Design, 31 (7). pp. 3550-3554. ISSN 0261-3069; ESSN: 1873-4197

Anuar, Mohd Shamsul and Briscoe, B. J. (2010) Interfacial elastic relaxation during the ejection of bi-layered tablets. International Journal of Pharmaceutics, 387 (1-2). pp. 42-47. ISSN 0378-5173

Arep @ Ariff, Hambali and Salit, Mohd Sapuan and Ismail, Napsiah and Yusoff, Nukman (2010) Material selection of polymeric composite automotive bumper beam using analytical hierarchy process. Journal of Central South University of Technology, 17 (2). pp. 244-256. ISSN 1005-9784

Arintono , Sulistyo (2010) The operating characteristics of intercity public van service in Lampung, Indonesia. Journal of Public Transportation, 13 (1). pp. 25-37. ISSN 1077-291X

Artan, Mohamud Yasin and Karim, Roselina and Boo, Huey Chern and Ariffin, Abdul Azis and Che Man, Yaakob and Chin, Nyuk L. (2010) The influence of different formulations of palm oil/palm stearin-based shortenings on the quality of white bread. Middle-East Journal of Scientific Research, 5 (6). pp. 469-476. ISSN 1990-9233

Asadi, Afshin and Kim Huat, Bujang and Musa, Mohamed Hanafi and Mohammed, Thamer Ahmed and Shariatmadari, Nader (2010) Physicochemical sensitivities of tropical peat to electrokinetic environment. Geosciences Journal, 14 (1). pp. 1-98. ISSN 1226-4806

Ashurov , Ravshan and Ahmedov, Anvarjon and Mahmud , Ahmad Rodzi (2010) The generalized localization for multiple Fourier integrals. Journal of Mathematical Analysis and Applications , 371 (2). pp. 832-841. ISSN 0022-247X; ESSN: 1096-0813

Awal, Md. Abdul and Wan Ismail, Wan Ishak and Bockari-Gevao, Sakr Marvin (2010) Determination of Leaf Area Index for Oil Palm Plantation Using Hemispherical Photography Technique. Pertanika Journal of Science & Technology, 18 (1). pp. 23-32. ISSN 0128-7680

B

Bachtiar, Situs Dandi and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdan, Khalina and Mohd Dahlan, Khairul Zaman (2010) The tensile properties of single sugar palm (Arenga pinnata) fibre. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Baharudin, Hang Tuah and Sulaiman, Shamsuddin and Mohd Arrifin, Mohd Khairol Anuar and Abdul Aziz, Faieza and Salit, Mohd Sapuan (2010) Coating Performance in High Speed Micro Machining of H13 Tool Steel. Advanced Materials Research, 83-86 . pp. 985-992. ISSN 1022-6680

Balafar, Mohd Ali and Ramli, A. R. and Saripan, M. Iqbal and Mashohor, Syamsiah (2010) Review of brain MRI image segmentation methods. Artificial Intelligence Review, 33 (3). pp. 261-274. ISSN 0269-2821

Basri, M. F. and Yacob , S. and Hassan, M. A. and Shirai, Yoshihito and Wakisata, Minato and Zakaria, M. R. and Phang, Lai Yee (2010) Improved biogas production from palm oil mill effluent by a scaled-down anaerobic treatment process. World Journal of Microbiology and Biotechnology, 26 (3). pp. 505-514. ISSN 0959-3993

Bayagoob, Khaled H. and Noorzaei, Jamaloddin and Jaafar, Mohd Saleh and Thanoon, Waleed Abdulmalik and Abdulrazeg, Aeid Ali (2010) Modelling heat exchange between RCC dam and reservoir. Proceedings of the ICE - Engineering and Computational Mechanics, 163 (1). pp. 33-42. ISSN 1755-0777

C

Che Lah, Nur Azida and Ali, Aidy and Ismail, Napsiah and Lim, Poon Chai and Mohamed, Abdul Aziz (2010) The effect of controlled shot peening on fusion welded joints. Materials and Design, 31 (1). pp. 312-324. ISSN 0264-1275

Che Man, Hasfalina and Maryam, R.Z. and Abdullah, Luqman Chuah and Rashid, M. (2010) The potential use of kenaf as a bioadsorbent for the removal of Copper and Nickel from single and binary aqueous solution. Journal of Natural Fibers , 7 (4). pp. 267-275. ISSN 1544-0478; ESSN: 1544-046X

Che Soh, Azura and Hassan, Mohd Khair and Ishak, Asnor Juraiza (2010) Vehicle gas leakage detector. The Pacific Journal of Science and Technology, 11 (2). pp. 66-76. ISSN 1551-7624

Chee, Kyun Ng and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin and Jamuar, Sudhanshu Shekhar and Ismail, Mahamod (2010) Spectrum Efficiency Enhancement in Dynamic Space Coded Multiple Access (DSCMA) System. Wireless Personal Communications, 53 (2). pp. 253-267. ISSN 0929-6212

Chin, K. L. and H’ng, Paik San and Wong, Lock Jam and Tey, Beng Ti and Md. Tahir, Paridah (2010) Optimization study of ethanolic fermentation from oil palm trunk, rubberwood and mixed hardwood hydrolysates using Saccharomyces cerevisiae. Bioresource Technology, 101 (9). pp. 3287-3291. ISSN 0960-8524

Chin, Nyuk Ling and Abdul Rahman, Russly and Mat Hashim, Dzulkifly and Kowng, Shin Yueh (2010) Palm oil shortening effects on baking performance of white bread. Journal of Food Process Engineering, 33 (3). pp. 413-433. ISSN 0145-8876

Chong, Fui Chin and Tan, Wen Siang and Awang Biak, Dayang Radiah and Ling, Tau Chuan and Tey, Beng Ti (2010) Direct recovery of recombinant nucleocapsid protein of Nipah virus from unclarified Escherichia coli homogenate using hydrophobic interaction expanded bed adsorption chromatography. Journal of Chromatography A., 1217 (8). pp. 1293-1297. ISSN 0021-9673

Chong, Fui Chin and Tan, Wen Siang and Awang Biak, Dayang Radiah and Ling, Tau Chuan and Tey, Beng Ti (2010) Modulation of protease activity to enhance the recovery of recombinant nucleocapsid protein of Nipah virus. Process Biochemistry, 45 (1). pp. 133-137. ISSN 1359-5113

Chong, Fui Chin and Tan, Wen Siang and Awang Biak, Dayang Radiah and Ling, Tau Chuan and Tey, Beng Ti (2010) A preparative hydrophobic interaction chromatography for purification of recombinant nucleocapsid protein of Nipah virus from clarified Escherichia coli homogenate. Separation and Purification Technology, 71 (1). pp. 97-101. ISSN 1383-5866

Chong, Fui Chin (2010) Chromatographic Purification of Recombinant Nucleocapsid Protein of Nipah Virus from Escherichia Coli Homogenate. PhD thesis, Universiti Putra Malaysia.

Chong, Jin Hui (2010) Dynamic transmit antenna shuffling scheme for hybrid multiple-input multiple-output in layered architecture. PhD thesis, Universiti Putra Malaysia.

Choong, Chieh Wean and Ali, Aidy and Sanuddin, Asmawi and Afshar, Reza (2010) Durability Simulation of Elastomeric Materials Using Finite Element Method (FEM). Pertanika Journal of Science & Technology, 18 (2). pp. 441-450. ISSN 0128-7680

D

Darestani, Soroush Avakh (2010) Statistical monitoring of supplier performance in a quality management system environment for the Iranian automotive industry. PhD thesis, Universiti Putra Malaysia..

E

Esfandiari, Ehsan and Mariun, Norman and Marhaban, Mohd Hamiruce and Zakaria, Azmi (2010) Switch-ladder: reliable and efficient multilevel inverter. Electronics Letters, 46 (9). pp. 646-647. ISSN 0013-5194

Esmaeilian Marnani, A. and Abas, Ahmad Fauzi and Moravvej Farshi, M. K. and Ebnali Heidari, M. (2010) Realization of wavelength conversion with hyperbolic secant femtosecond pulse in normal dispersion regime. Journal of Modern Optics, 57 (8). pp. 601-606. ISSN 0950-0340

F

Farrokhpayam, Saeid Reza and Ratnasingam, Jegatheswaran and Bakar, Edi Suhaimi and Tang, Sai Hong (2010) Characterizing Surface Defects of Solid Wood of Dark Red Meranti (Shorea sp.),Melunak (pentace sp.) and Rubberwood (Heavea Brasiliensis) in Planning Process. Journal of Applied Sciences, 10 (11). pp. 915-918. ISSN 1812-5654

Fatchurrohman, Nanang and Sulaiman, Shamsuddin (2010) The Effect of Particulate Reinforcement Addition to Latent Heat and Solid Fraction During Solidification of Titanium Carbide Particulates Reinforced Aluminium Alloy Matrix Composite Produced by Vortex Mixing-Sand Casting Technique. International Review of Mechanical Engineering, 4 (1). pp. 12-17. ISSN 1970-8734

Firouzi, Amin (2010) Effect of gas adsorption on electrical resistance of carbon nanotubes. Masters thesis, Universiti Putra Malaysia.

G

Ghiyamat, Azadeh and Mohd Shafri, Helmi Zulhaidi (2010) A review on hyperspectral remote sensing for homogeneous and heterogeneous forest biodiversity assessment. International Journal of Remote Sensing, 31 (7). pp. 1837-1856. ISSN 0143-1161

Gholizadeh, Asa and Mohd Soom, Mohd Amin and Abdul Rahim, Anuar and Saberioon, Mohamed M. (2010) Water stress and natural zeolite impacts on phisiomorphological characteristics of moldavian balm (Dracocephalum moldavica l.). Australian Journal of Basic and Applied Sciences, 4 (10). pp. 5184-5190. ISSN 1991-8178

Gholizadeh , Asa and Mohd Soom, Mohd Amin and Anuar, Abdul Rahim and Esfahani , Masoud and Saberioon , Mohamed M. (2010) The study on the effect of different levels of Zeolit and water stress on growth, development and essentials oil content of Moldavian balm (Dracocephalum moldavica L.). American Journal of Applied Sciences, 7 (1). pp. 33-37. ISSN 1546-9239; ESSN: 1554-3641

H

Hamza, Bashar J. and Ng, Chee Kyun and Noordin, Nor Kamariah and A. Rasid, Mohd Fadlee and Ismail, Alyani (2010) Review of minimizing a vertical handover in a heterogeneous wireless network. IETE Technical Review , 27 (2). 97 - 106. ISSN 0256-4602; ESSN: 0974-5971

Hamza , Bashar J. and Ng, Chee Kyun and Noordin, Nor Kamariah and A. Rasid , Mohd Fadlee and Ismail , Alyani (2010) The seamless vertical handover between (universal mobile telecommunications system) UMTS and (Wireless local area network) WLAN by using hybrid scheme of Bi-mSCTP in Mobile IP. Scientific Research and Essays, 5 (22). pp. 3474-3489. ISSN 1992-2248

Hasan, Ali T. and Ismail, Napsiah and Hamouda, Abdel Majid Saleem and Aris, Ishak and Marhaban, Mohd Hamiruce and Al-Assadi, Hayder M. A. Ali (2010) Artificial neural network-based kinematics Jacobian solution for serial manipulator passing through singular configurations. Advances in Engineering Software, 41 (2). pp. 359-367. ISSN 0965-9978

Hasan, Ahmed Mudheher and Samsudin, Khairulmizam and Ramli, Abdul Rahman and Raja Abdullah, Raja Shmsul Azmir (2010) Wavelet-based pre-filtering for low cost inertial sensors. Journal of Applied Sciences , 10 (19). pp. 2217-2230. ISSN 1812-5654; ESSN: 1812-5662

Hasan , Mohd. Khair and Aris , Ishak (2010) The effect of the ignition dwell time at constant speed for CNGDI engine. Australian Journal of Basic and Applied Sciences, 4 (10). pp. 4691-4694. ISSN 1991-8178

Hasany, Norman and Jantan, Adznan and Selamat, Mohd. Hasan and Saripan, Mohd Iqbal (2010) Querying Ontology using Keywords and Quantitative Restriction Phrases. Information Technology Journal, 9 (67-68). 01-12. ISSN 1812-5638

Hashima, Suhairul and Bradley, D. A. and Saripan, M. Iqbal and Ramli, Ahmad Termizi and Wagiran, Husin (2010) The thermoluminescence response of doped SiO2 optical fibres subjected to fast neutrons. Applied Radiation and Isotopes, 68 (4-5). pp. 700-703. ISSN 0969-8043

Helmi, Adam and Ismail, Alyani and Mahdi, Mohd Adzir (2010) Compact wideband multilayer microstrip coupled lines bandpass filter for X-band application. Microwave and Optical Technology Letters, 52 (3). pp. 448-450. ISSN 0895-2477

Hizam, Hashim and Aris, Ishak and Ab Kadir, Mohd Zainal Abidin and Akorede, Mudathir Funsho (2010) Qualitative and Quantitative Analysis of System Stability and Power Quality in Networks with DG of Different Penetration Levels. International Review of Electrical Engineering, 5 (5). pp. 2366-2377. ISSN 1827-6660

Hizam, Hashim and Aris, Ishak and Ab Kadir, Mohd Zainal Abidin and Akorede, Mudathir Funsho (2010) A critical review of strategies for optimal allocation of Distributed Generations units in Electrical Power Systems. International Review of Electrical Engineering, 5 (2). pp. 593-600. ISSN 1827-6660

Hor, Shee Yong and Beng, Ti Tey and Siew, Ling Hii and Mustapa Kamal, Siti Mazlina and Ariff, Arbakariya and Tau, Chuan Ling (2010) Application of a high density adsorbent in expanded bed adsorption of lipase from Burkholderia pseudomallei. African Journal of Biotechnology, 9 (2). pp. 203-216. ISSN 1684–5315

Hua, Law Teik and Noland, R.B. and Evans, A.W. (2010) The direct and indirect effects of corruption on motor vehicle crash deaths. Accident Analysis and Prevention , 42 (6). pp. 1934-1942. ISSN 0001-4575; ESSN: 1879-2057

Hussain, Siti Aslina and Tan, Hong Tat and Hamid, Mohd Ismail and Abdullah, Norhafizah and Idris, Azni (2010) Numerical Method on Blood Flow Pressure Drop in Aorta Coronary Sinus Conduit. In: 6th International Conference on Diffusion in Solids and Liquids – DSL-2010, 5 - 7 July, 2010, Paris, France. (Unpublished)

Hussein, Basheer Noaman and Sulaiman, Nasri and Ali, Hazem Ibrahim (2010) Robust controller design for single axis magnetic levitation system. Australian Journal of Basic and Applied Sciences, 4 (9). pp. 4379-4389. ISSN 1991-8178

I

Indriasaria, Vini and Mahmud, Ahmad Rodzi and Ahmad, Noordin and M. Shariff, Abdul Rashid (2010) Maximal service area problem for optimal siting of emergency facilities. International Journal of Geographical Information Science, 24 (2). pp. 213-230. ISSN 1365-8824

Islam, Md. Syedul and Ahmad, Desa (2010) Crop Establishment Technologies for Lowland Rice Cultivation in Bangladesh: Hand Seeding vs. Machine Seeding. Pertanika Journal of Science & Technology, 18 (1). pp. 95-103. ISSN 0128-7680

Ismail, Siti Norazian (2010) Investigation of floating catalyst CVD for development of CNT-coated carbon fibre reinforced composite. Masters thesis, Universiti Putra Malaysia.

Ismail , Samy and Mansor, Shattri and Kim Huat, Bujang and Rodsi , Ahmed (2010) Topographic openness algorithm for characterizing geologic fractures of Kuala Lumpur limestone bedrock using DEM. Journal of Geomatics, 4 (2 ). pp. 61-68. ISSN 1007-3817

J

Jaafar, Mohd Saleh and Nordin, N. K. and Wagiran, Rahman and Aziz, A. and Megat Mohd Noor, Megat Johari and Osman, Mohd Rasid and Noorzaei, Jamaloddin and Abdulaziz, Faieza (2010) Assessment Strategy for an Outcome Based Education. In: International Conference on Computing in Civil and Building Engineering, 30 June-2 July 2010, Nottingham, UK.

Jahan, Ali and Ismail, Md. Yusof and Salit, Mohd Sapuan and Mustapha, Faizal (2010) Material screening and choosing methods – A review. Materials and Design, 31 (2). pp. 696-705. ISSN 0264-1275

Jamek , S.B. and Cheng , N.G. and Guan , C.T. (2010) The isolation and amplification of full length cDNA of oleosins from Oil palm (Elaeis guineensis Jacq.). African Journal of Biotechnology, 9 (13 ). pp. 1859-1863. ISSN 1684–5315

Javanmard, Marjan and Endan, Johari and Abbas, Kassim Ali and Arvin, Farshad (2010) Development of a semi-industrial multi fruit dryer system using simultaneous intelligent control. American Journal of Applied Sciences , 7 (2). pp. 160-166. ISSN 1546-9239; ESSN: 1554-3641

K

Kalantari, Behzad (2010) Stabilization of Tropical Fibrous Peat Using Ordinary Portland Cement and Additives. PhD thesis, Universiti Putra Malaysia.

Kalantari, Behzad and Kim Huat, Bujang and Prasad, Arun (2010) Effect of Polypropylene Fibers on the California Bearing Ratio of Air Cured Stabilized Tropical Peat Soil. American Journal of Engineering and Applied Sciences, 3 (1). pp. 1-6. ISSN 1941-7020

Karimi-Googhari, Shahram and Huang, Yuk Feng and Ghazali, Abdul Halim and Lee, Teang Shui (2010) Neural Networks for Forecasting Daily Reservoir Inflows. Pertanika Journal of Science & Technology, 18 (1). pp. 33-41. ISSN 0128-7680

Kazemian, Sina and Prasad, Arun and Kim Huat, Bujang (2010) Rheological behavior of grout in context of Newtonian and non-Newtonian fund. Electronic Journal of Geotechnical Engineering, 15 (K). pp. 1103-1115. ISSN 1089-3032

Khabbazi, Mahmood Reza and Ismail, Md. Yusof and Ismail, Napsiah and Mousavi, Sayed Alireza (2010) Modeling of Traceability Information System for Material Flow Control Data. Australian Journal of Basic and Applied Sciences, 4 (2). pp. 208-216. ISSN 1991-8178

Kohnehpooshi, Omid and Noorzaei, Jamaloddin and Jaafar, Mohd Saleh and Abdulrazeg, Aeid Ali and Muhammad Rashid, Raizal Saifulnaz (2010) Three Dimensional Finite Element Modeling of Reinforced Concrete Beams, Using Lagrangian and Truss-Linkage Elements. Asian Journal Of Civil Engineering (Building And Housing), 11 (1). pp. 71-82. ISSN 1563-0854 (Unpublished)

Kojouri, Samira Jilani (2010) Seismic assessment and strenghthening of existing residential reinforced concrete buildings. Masters thesis, Universiti Putra Malaysia..

L

Lee, L. S. and Ali, Aidy and Sanuddin, Asmawi and Reza, Afshar (2010) Simulation and Experimental Work on a Thin-Walled Structure Under Crushing. Journal of Failure Analysis and Prevention, 10 . pp. 143-151. ISSN 1547-7029

Liew, J. C. and Tan, Wen Siang and Mohamed Alitheen, Noorjahan Banu and Chan , E. S. and Tey, Beng Ti (2010) Over-expression of the X-linked inhibitor of apoptosis protein (XIAP) delays serum deprivation-induced apoptosis in CHO-K1 cells. Journal of Bioscience and Bioengineering, 110 (3). pp. 338-44. ISSN 1389-1723

Luechau, Frank and Tau, Chuan Ling and Lyddiatt, Andrew (2010) Physical characterisations of a single-stage Kühni-type aqueous two-phase extraction column. Biochemical Engineering Journal, 50 (3). pp. 90-98. ISSN 1369-703X

Luechau, Frank and Tau, Chuan Ling and Lyddiatt, Andrew (2010) A descriptive model and methods for up-scaled process routes for interfacial partition of bioparticles in aqueous two-phase systems. Biochemical Engineering Journal, 50 (3). pp. 122-130. ISSN 1369-703X

Luechau, Frank and Ling, Tau Chuan and Lyddiatt, Andrew (2010) Two-step process for initial capture of plasmid DNA and partial removal of RNA using aqueous two-phase systems. Process Biochemistry, 45 (8). pp. 1432-1436. ISSN 1359-5113

M

M. M., Shahzamanian and Sahari, Barkawi and Bayat, Mehdi and Zahari, Nur Ismarrubie and Mustapha, Faizal (2010) Transient and thermal contact analysis for the elastic behavior of functionally graded brake disks due to mechanical and thermal loads. Materials and Design, 31 (10). pp. 4655-4665. ISSN 0264-1275

Mahdiraji, Ghafour Amouzad and Abdullah, Mohamad Khazani and Mokhtar, Makhfudzah and Mohammadi, Amin Malek and Abas, Ahmad Fauzi and Mohd Basir, Safuraa and Raja Abdullah, Raja Syamsul Azmir (2010) 70-Gb/s amplitude-shift-keyed system with 10-GHz clock recovery circuit using duty cycle division multiplexing. Photonic Network Communications, 19 (3). pp. 233-239. ISSN 1387-974X

Mahmoud, Thair S. and Marhaban, Mohammad H. and Tang, Sai Hong (2010) ANFIS: Self-tuning Fuzzy PD Controller for Twin Rotor MIMO System. IEEJ Transactions on Electrical and Electronic Engineering, 5 (3). pp. 369-371. ISSN 1931-4981

Mailah, Nashiren Farzilah (2010) Simulation and Development of Unified Power Flow Controller Using Multilevel Inverter. PhD thesis, Universiti Putra Malaysia.

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Ali, Aidy and Ahmad, Desa and Abdan, Khalina (2010) Thermoplastic impact property improvement in hybrid natural fibre epoxy composite bumper beam. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Malekmohammadi, Amin and Al-Mansoori, Mohammed Hayder and Mahdiraji, Ghafour Amouzad and Abas, Ahmad Fauzi and Abdullah, Mohamad Khazani (2010) Performance enhancement of Absolute Polar Duty Cycle Division Multiplexing with Dual-Drive Mach–Zehnder-Modulator in 40 Gbit/s optical fiber communication systems. Optics Communications, 283 (16). pp. 3145-3148. ISSN 0030-4018

Mansor, Halimathon and Mohd Noor, Samsul Bahari and Raja Ahmad, Raja Mohd Kamil and Taip, Farah Saleena and Lutfy, O. F. (2010) Intelligent control of grain drying process using fuzzy logic controller. International Journal of Food, Agriculture and Environment, 8 (1). pp. 145-149. ISSN 1459-0255

Masdi , Hendri and Mariun, Norman (2010) Transient response study on transformer windings under impulse voltage stresses. International Review of Electrical Engineering , 5 (3). pp. 1022-1026. ISSN 1827-6660

Md Salleh, Liza (2010) Extraction of bioactive flavonoid compounds from pecah kaca (strobilanthes crispus) using supercritical carbon dioxide. PhD thesis, Universiti Putra Malaysia..

Mirjalili, Fatemeh and Mohamad, Hasmaliza and Abdullah, Luqman Chuah (2010) Size-controlled synthesis of nano α-alumina particles through the sol–gel method. Ceramics International , 36 (4). pp. 1253-1257. ISSN 0272-8842

Misri, Sairizal and Leman, Zulkiflle and Salit, Mohd Sapuan and Ishak, M. R. (2010) Mechanical properties and fabrication of small boat using woven glass/sugar palm fibres reinforced unsaturated polyester hybrid composite. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Moayedi, Hossein and Kim Huat, Bujang and Kazemian, Sina and Asadi, Afshin (2010) Optimization of Tension Absorption of Geosynthetics through Reinforced Slope. Electronic Journal of Geotechnical Engineering, 15 . pp. 93-104. ISSN 1089-3032

Moayedi, Hossein and Kim Huat, Bujang and Mohammad Ali, Thamer Ahmad and Haghighi, Ali Torabi and Asadi, Afshin (2010) Analysis of Longitudinal Cracks in Crest of Doroodzan Dam. Electronic Journal of Geotechnical Engineering , 15 . pp. 337-347. ISSN 1089-3032

Moayedi, Hossein and Kim Huat, Bujang and Mokhberi, Mehdi and Moghaddam, Arash Ansari and Moghaddam, Shokoufeh Ansari (2010) Using stone column as a suitable liquefaction remediation in Persian Gulf coast. Electronic Journal of Geotechnical Engineering , 15 P . pp. 1757-1767. ISSN 1089-3032

Moazami, Danial and Muniandy, Ratnasamy and Hamid, Hussain and Md Yusoff, Zainuddin (2010) Developing a comprehensive pavement management system in Tehran, Iran using microPAVER. Electronic Journal of Geotechnical Engineering , 15 (P). pp. 1782-1792. ISSN 1089-3032

Mohamad, Nurhaniza and Mohd Atan, Kamel Ariffin and Ali, Aidy and Mustapha, Faizal and Abdul Wahab, Noraini (2010) Finite element analysis of composites materials for aerospace applications. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Mohamed, A. S. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Hamouda, Abdel Majid Saleem and Baharudin, Hang Tuah (2010) Modeling technology transfer for petroleum industry in Libya: An overview. Scientific Research and Essay, 5 (2). pp. 130-147. ISSN 1992-2248

Mohamed Yusoff, Mohd Zuhri and Salit, Mohd Sapuan and Ismail, Napsiah and Wirawan, Riza (2010) Mechanical Properties of Short Random Oil Palm Fibre Reinforced Epoxy Composites. Sains Malaysiana, 39 (1). pp. 87-92. ISSN 0126-6039

Mohammad Yusoff, Wardah Fatimah and Salleh, Elias and Adam, Nor Mariah and Sapian, Abdul Razak and Sulaiman, Mohamad Yusof (2010) Enhancement of stack ventilation in hot and humid climate using a combination of roof solar collector and vertical stack. Building and Environment, 45 (10). pp. 2296-2308. ISSN 0360-1323

Mohammed, Thamer Ahmed and Abdul Kadir, Mohd. Razali and Megat Mohd Noor, Megat Johari and Sulaiman, Ahmad Husaini (2010) Assessment of Using Tunneling and Trenchless Technology for Constricting Twin Box Culvert. Pertanika Journal of Science & Technology, 18 (1). pp. 155-166. ISSN 0128-7680

Mohd Husin, Ezrin and Mohd. Soom, Mohd. Amin and Abd Rahim, Anuar and Wayayok, Aimrun (2010) Relationship between rice yield and apparent electrical conductivity of paddy soils. American Journal of Applied Sciences , 7 (1). pp. 63-70. ISSN 1546-9239; ESSN:1554-3641

Mohd Jakarni, Fauzan and Muniandy, Ratnasamy and Hassim, Sudin and Mahmud, Ahmad Rodzi (2010) Analysis of Stone Mastic Asphalt (SMA) Slab Dimensions for Evaluation of the Newly Developed Roller Compactor (Turamesin). Pertanika Journal of Science & Technology, 18 (1). pp. 13-22. ISSN 0128-7680

Mohd Nasir, Norlirubayah (2010) Decolorization and decomposition of textile wastewater using a combination of electron beam irradiation and activated sludge processes. Masters thesis, Universiti Putra Malaysia..

Mohd Tahir, Suraya and Ariffin, Ahmad Kamal and Anuar, Mohd Shamsul (2010) Finite element modelling of crack propagation in metal powder compaction using Mohr–Coulomb and Elliptical Cap yield criteria. Powder Technology, 202 (1-3). pp. 162-170. ISSN 0032-5910

Mohd Yusuff, Rosnah and Abdullah, Airing Zairose (2010) Prevalence of cumulative trauma disorders among office workers in a semiconductor industry. In: 9th Pan Pacific Conference on Ergonomics (PPCOE 2010), 7 - 10 November 2010, Kaohsiung, Taiwan.

Borhanuddin Mohd. Ali (2010) A concatenated multi-dimentional signal modulation transmitter and receiver system and a method thereof.

Borhanuddin Mohd. Ali (2010) Client/server architecture having a dynamic and transparent middle tier.

Mumtaz, Tabassum and Khan, Muhammad Rahim and Hassan, Mohd Ali (2010) Study of environmental biodegradation of LDPE films in soil using optical and scanning electron microscopy. Micron, 41 (5). pp. 430-438. ISSN 0968-4328

Mustapha, Faizal and Ismail, Napsiah and Salit, Mohd Sapuan and Noh, Z. and Samsuri, Abd Wahid (2010) Development of a prototype knowledge based system for troubleshooting of aircraft engine and parts- A case study of Cessna Caravan. International Journal of Mechanical and Materials Engineering , 5 (1). pp. 36-42. ISSN 1823-0334

N

Najafi, Assal Haj (2010) Osmotic dehydration combined with air drying of red pitaya fruit cubes. Masters thesis, Universiti Putra Malaysia.

Jamaloddin Noorzaei (2010) Method and system for determining the number and position of damping elements of building structures.

Norozi, Ahmad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah (2010) Application of Intelligence Based Genetic Algorithm for Job Sequencing Problem on Parallel Mixed-Model Assembly Line. American Journal of Engineering and Applied Sciences, 3 (1). pp. 15-24. ISSN 1941-7020

O

Omar, Rozita (2010) Evaluation of microwave pyrolysis of oil palm empty fruit bunches. PhD thesis, Universiti Putra Malaysia.

R

Rad, Habibollah Arasteh (2010) Development of mobile road traffic infraction registration system. Masters thesis, Universiti Putra Malaysia.

Rahimi, Maryam and Jamuar, Sudhanshu Shekhar and Hamidon, Mohd Nizar and Ahmad, Mohd Rais and Mousavi, Sayed Alireza and Bayat, Mehdi (2010) An optimized 2.4 GHz VCO circuit design and simulation with high-Q MEMS LC-tank. International Journal of Electronics and Communications, 64 (5). pp. 413-424. ISSN 1434-8411

Rahman, Ataur and Mohiuddin, A. K. M. and Ismail, Ahmad Faris and Yahya, Azmi and Hossain, Altab (2010) Development of hybrid electrical air-cushion tracked vehicle for swamp peat. Journal of Terramechanics, 47 . pp. 45-54. ISSN 0022-4898

Ramanan, Ramakrishnan Nagasundara and Tau , Chuan Ling and Tey, Beng Ti and Ariff, Arbakariya (2010) A simple method for quantification of interferon-a2b through surface plasmon resonance technique. African Journal of Biotechnology, 9 (11). pp. 1680-1689. ISSN 1684-5315; ESSN: 1684-5315

Ramanan, Ramakrishnan Nagasundara and Wong, Bee Tik and Memari, Hamid Rajabi and Azaman, Siti Nor Ani and Tau, Chuan Ling and Beng, Ti Tey and Mohd Lila, Mohd Azmi and Abdullah, Mohd Puad and Abdul Rahim, Raha and Ariff, Arbakariya (2010) Effect of promoter strength and signal sequence on the periplasmic expression of human interferon-2b in Escherichia coli. African Journal of Biotechnology, 9 (3). pp. 285-292. ISSN 1684–5315

Ramanana, Ramakrishnan Nagasundara and Tana, Joo Shun and Mohamed, Mohd Shamzi and Tau, Chuan Ling and Tey, Beng Ti and Ariff, Arbakariya (2010) Optimization of osmotic shock process variables for enhancement of the release of periplasmic interferon-α2b from Escherichia coli using response surface method. Process Biochemistry, 45 (2). pp. 196-202. ISSN 1359-5113

Rashdi, Abdalla A. Ab. and Salit, Mohd Sapuan and Abdan, Khalina and Megat Ahmad, Megat Mohamad Hamdan (2010) Water Absorption Behaviour of Kenaf Reinforced Unsaturated Polyester Composites and Its Influence on Their Mechanical Properties. Pertanika Journal of Science & Technology, 18 (2). pp. 433-440. ISSN 0128-7680

Rimy, M.M. and Abdul Aziz, Faieza (2010) Simulation of car bumper material using finite element analysis. Journal of Software Engineering , 4 (3). pp. 257-264. ISSN 1819-4311; ESSN: 2152-0941

Rokhani, Fakhrul Z. and Sobelman, Gerald E. (2010) Bus Energy Consumption for Multilevel Signals. Circuits and Systems I: Regular Papers, IEEE Transactions on , 57 (1). pp. 64-71. ISSN 1549-8328

Roslan, R. E. and Mohd Saad, Wira Hidayat and Saripan, M. Iqbal and Hashim, Sharifah and Choong, W. S. (2010) The performance of a wire mesh collimator SPECT camera for different breast volumes in prone position. Nuclear Instruments and Methods in Physics Research Section A, 619 (1-3). pp. 385-387. ISSN 0168-9002

Roslee, Mardeni and Raja Abdullah, Raja Syamsul Azmir and Mohd Shafri, Helmi Zulhaidi (2010) Road Pavement Density Analysis Using A New Non-Destructive Ground Penetrating Radar System. Progress In Electromagnetics Research B, 21 . pp. 399-417. ISSN 1937-6472

S

Saeed, Rashid Abdelhaleem and Khatun, Sabira and Mohd Ali, Borhanuddin and Abdullah, Khazani (2010) A joint PHY/MAC cross-layer design for UWB under power control. Computers and Electrical Engineering, 36 (3). pp. 455-468. ISSN 0045-7906

Safaei, Mehrdad and Omar, Husaini and Ghiasi, Vahed and Yousof, Zenoddin B.M. (2010) Applying geospatial technology to landslide susceptibility assessment. Electronic Journal of Geotechnical Engineering, 15 (G). pp. 677-696. ISSN 1089-3032

Saghravani, Seyed Reza and Mustapha, Sa'ari and Ibrahim, Shaharin and Mohd. Zawawi, Mohd. Azwan and Randjbaran, Elias (2010) Simulation of phosphorus movement in unconfined aquifer by means of visual MODFLOW. Journal of Computer Science, 6 (4). pp. 446-449. ISSN 1549-3636

Barkawi Sahari (2010) Compressed natural gas fuel injection system and method.

Sahbudin, Ratna Kalos Zakiah (2010) Hybrid subcarrier - optical spectrum code division multiplexing system with spectral direct decoding detection technique. PhD thesis, Universiti Putra Malaysia.

Samad, M. S. A. and Ali, Aidy (2010) Simulation work of fatigue life prediction of rubber automotive components. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Samsu Baharuddin, Azhari and Abd. Razak, Mohamad Nafis and Lim, Siong Hock and Ahmad, Mohd Najib and Abd. Aziz, Suraini and Abdul Rahman, Nor’ Aini and Md Shah, Umi Kalsom and Hassan, Mohd Ali and Kenji, Sakai and Yoshihito, Shirai (2010) Isolation and Characterization of Thermophilic Cellulase-Producing Bacteria from Empty Fruit Bunches-Palm Oil Mill Effluent Compost. American Journal of Applied Sciences, 7 (1). pp. 56-62. ISSN 1546-9239

Samsu Baharuddin, Azhari and Lim, Siong Hock and Md Yusof, Mohd Zulkhairi and Abdul Rahman, Nor’ Aini and Md Shah, Umi kalsom and Hassan, Mohd Ali and Wakisaka, Minato and Sakai, Kenji and Shirai, Yoshihito (2010) Effects of palm oil mill effluent (POME) anaerobic sludge from 500 m3 of closed anaerobic methane digested tank on pressed-shredded empty fruit bunch(EFB) composting process. African Journal of Biotechnology, 9 (16). pp. 2427-2436. ISSN 1684-5315

Saniei, Soodeh Zahab (2010) Improved receiver system for laser range finder. Masters thesis, Universiti Putra Malaysia..

Schmidt, Brendon J. C. and Zan, Zuraidah and Liang, B. Du and Lowery, Arthur J. (2010) 120 Gbit/s Over 500-km Using Single-Band Polarization-Multiplexed Self-Coherent Optical OFDM. Journal of Lightwave Technology, 28 (4). pp. 328-335. ISSN 0733-8724

Sedehi Esfahani, Mohammad Tolou Askari (2010) Using a dynamic thermal model approach to estimate loss of life of mineral oil-immersed transformers. Masters thesis, Universiti Putra Malaysia.

Selvakumar, Pitchaivelu and Tau, Chuan Ling and Walker, Simon and Lyddiatt, Andrew (2010) Redefinition of working aqueous two-phase systems: a generic description for prediction of the effective phase chemical composition for process control and biorecovery. Journal of Chromatography B, 878 (21). pp. 1784-1790. ISSN 1570-0232

Seyed, Shahabeddin Nehzati (2010) Modeling and simulation of fluidized bed gasifier of biomass. Masters thesis, Universiti Putra Malaysia.

Shahrjerdi, Ali and Bayat, Mehdi and Mustapha, Faizal and Salit, Mohd Sapuan and Zahari, Rizal (2010) Free Vibration Analysis of Functionally Graded Quadrangle Plates Using Second Order Shear Deformation Theory. Australian Journal of Basic and Applied Sciences, 4 (5). pp. 893-905. ISSN 1991-8178

Shahrjerdi, Ali and Bayat, Mehdi and Mustapha, Faizal and Salit, Mohd Sapuan and Zahari , Rizal (2010) Stress analysis a functionally graded quadrangle plate using second order shear deformation theory. International Review of Mechanical Engineering , 4 (1). pp. 92-105. ISSN 1970-8734

Shahzamanian Sichani, Mohammadmehdi and Sahari, Barkawi and Bayat, Mehdi and Mustapha, Faizal and Zahari, Nur Ismarrubie (2010) Finite element analysis of thermoelastic contact problem in functionally graded axisymmetric brake disks. Composite Structures, 92 (7). pp. 1591-1602. ISSN 0263-8223

Rosnah Shamsuddin (2010) A Cookie Forming Machine.

Rosnah Shamsuddin (2010) Machine for making jam.

Rosnah Shamsuddin (2010) A cooking machine.

Rosnah Shamsuddin (2010) A crunched seed preparation system.

Shamsudin, Rosnah and Chung, Ai Sing and Mohd Adzahan, Noranizan (2010) Storage Effect of Malaysian Cassava (Manihot Esculenta) Root Tubers on the Quality of Chips. In: 1st International Congress on Food Technology 3-6 Nov 2010 Antalya,Turki, 3-6 November 2010, Antalya,Turki.

Shee, Y. G. and Mahdi, Mohd Adzir and Al-Mansoori, Mohammed Hayder and Yaakob, S. and Mohamed, R. and Zamzuri, Abdul Kadir and Man, Azmi and Ismail, Alyani and Hitam, Salasiah (2010) All-optical generation of a 21 GHz microwave carrier by incorporating a double-Brillouin frequency shifter. Optics Letters, 35 (9). pp. 1461-1463. ISSN 0146-9592

Sidhu, R. S. and Ali, Aidy (2010) Fatigue life of automotive rubber jounce bumper. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Siregar, Januar Parlaungan and Salit, Mohd Sapuan and Abdul Rahman, Mohd Zaki and Mohd Dahlan, Khairul Zaman (2010) The effect of electron beam irradiation on the mechanical properties of pineapple leaf fibre (PALF) reinforced high impact polystyrene (HIPS) composites. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Sojodishijani, Omid and Ramli, Abd Rahman and Rostami, Vahid and Samsudin, Khairulmizam and Saripan, Mohd Iqbal (2010) Just-in-time outdoor color discrimination using adaptive similarity-based classifier. IEICE Electronics Express, 7 (5). pp. 339-345. ISSN 1349-2543

Solomon, Giwa and Abdullah, Luqman Chuah and Adam, Nor Mariah (2010) Investigating “Egusi” (Citrullus Colocynthis L.) Seed Oil as Potential Biodiesel Feedstock. Energies, 3 (4). pp. 607-618. ISSN 996-1073

Sorooshian, Shahryar and Zulkifli, Norzima and Yusoff, I. and Mohd Yusuff, Rosnah (2010) Structural modeling of entrepreneur's effectiveness. World Applied Sciences Journal, 10 (8). pp. 923-929. ISSN 1818-4952; ESSN: 1991-6426

Suhail, Adeel H. and Ismail, Napsiah and Wong, Shaw Voon and Abdul Jalil, Nawal Aswan (2010) Optimization of Cutting Parameters Based on Surface Roughness and Assistance of Workpiece Surface Temperature in Turning Process. American Journal of Engineering and Applied Sciences, 3 (1). pp. 102-108. ISSN 1941-7020

Sulaiman, Alawi (2010) Enhanced biomethanation of palm oil mill effluent during anaerobic treatment in a closed digester tank. PhD thesis, Universiti Putra Malaysia.

Sulaiman, Alawi and Tabatabaei, Meisam and Mohd Yusoff, Mohd Zulkhairi and Ibrahim, Mohamad Faizal and Hassan, Mohd Ali and Shirai, Yoshihito (2010) Accelerated start-up of a semi-commercial digester tank treating palm oil mill effluent with sludge seeding for methane production. World Applied Science Journal , 8 (2). pp. 247-258. ISSN 1818-4952

Sultan Aljibori, Hakim S. and Chong, W. P. and T. M., Indra Mahlia and Chong, Wen Tong and Edi, Prasetyo and Al-qrimli, Haidar and Anjum, Irfan and Zahari, Rizal (2010) Load–displacement behavior of glass fiber/epoxy composite plates with circular cut-outs subjected to compressive load. Materials and Design, 31 (1). pp. 466-474. ISSN 0264-1275

T

Taher, Siavash T. and Oshkour, Azim Ataollahi and Zahari, Rizal and Mustapha, Faizal and Basri, Shahnor (2010) On the Crush Behavior of an Ultra Light Multi-Cell Foam-Filled Composite Structure under Axial Compression. Journal of Reinforced Plastics and Composites, 29 (3). ISSN 0731-6844

Tajeddin, Behjat and Abdul Rahman, Russly and Abdullah, Luqman Chuah (2010) The effect of polyethylene glycol on the characteristics of kenaf cellulose/low-density polyethylene biocomposites. International Journal of Biological Macromolecules, 47 (2). pp. 292-297. ISSN 0141-8130

Tajeddin, Behjat and Abdulah, Luqman Chuah (2010) Thermal properties of high density polyethylene-kenaf cellulose composites. Polymers and Polymer Composites , 18 (5). pp. 257-261. ISSN 0967-3911

Tan, M. C. and Chin, N. L. (2010) Effect of Ultrasonic Waves on Cake Batter & Properties. In: 15th World Congress of Food Science & Technology, 22-26 Aug 2010, Cape Town, South Africa.

Tavangar, Leila (2010) Modelling an inventory management system using a system dynamic approach. Masters thesis, Universiti Putra Malaysia.

Toudeshki, Arash Mohammadi (2010) Development of variable high frequency voltage source for ohmic heating process. Masters thesis, Universiti Putra Malaysia.

V

Varahram, Pooria (2010) Power Amplifiers Linearization Based On Complex Gain Memory Predistortion. PhD thesis, Universiti Putra Malaysia.

W

Wai, Kien Tat and Idris, Azni and Megat Mohd Noor, Megat Johari and Mohammed, Thamer Ahmed and Ghazali, Abdul Halim and Muyibi, Suleyman A. (2010) Optimization study on sewage sludge conditioning using Moringa oleifera seeds. Desalination and Water Treatment, 16 (1-3). pp. 402-410. ISSN 1944-3994

Wan Ab. Karim Ghani, Wan Azlina and Abdullah, M.S.F. and Matori, Khamirul Amin and Alias, A. B. and da Silva, Gabriel (2010) Physical and thermochemical characterization of Malaysian biomass ashes. Journal of the Institution of Engineers, Malaysia, 71 (3). pp. 9-18. ISSN 0126-513X

Wan Ismail, Wan Ishak and Razali, Mohd Hudzari (2010) Image based modeling for oil palm fruit maturity prediction. International Journal of Food, Agriculture and Environment, 8 (2). pp. 469-476. ISSN 1459-0255

Wan Ismail, Wan Ishak and Khairuddin, Abdul Rahman (2010) Software Development for Real-Time Weed Colour Analysis. Pertanika Journal of Science & Technology, 18 (2). pp. 243-253. ISSN 0128-7680

Wan Ismail, Wan Ishak and Kit, W. H. and Awal, Md. Abdul (2010) Design and Development of Eggplant Harvester for Gantry System. Pertanika Journal of Science & Technology, 18 (2). pp. 231-242. ISSN 0128-7680

Wayayok, Aimrun and Mohd Soom, Mohd Amin and Gholizadeh, Asa (2010) Spatial variability of irrigation water percolation rates and its relation to rice productivity. American Journal of Applied Sciences , 7 (1). pp. 51-55. ISSN 1546-9239; ESSN: 1554-3641

Wirawan, Riza and Salit, Mohd Sapuan and Yunus, Robiah and Abdan, Khalina (2010) Flexural properties of sugarcane bagasse pith and rind reinforced poly(vinyl chloride). IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Wong Shaw Voon (2010) Artificial intelligence device and corresponding methods for selecting machinability data.

Y

Yahya, Anwar Ali and Mahmod, Ramlan and Ramli, Abd Rahman (2010) Dynamic Bayesian networks and variable length genetic algorithm for designing cue-based model for dialogue act recognition. Computer Speech and Language, 24 (2). ISSN 0885-2308

Yahya, Azmi and El Pebrian, Darius (2010) Comparisons on engine power requirements of 6WD and 4WD prime movers for the oil palm plantation in Malaysia. Journal of Terramechanics, 47 (3). pp. 131-142. ISSN 0022-4898

Yap, Wei Boon and Tey, Beng Ti and Mohamed Alitheen, Noorjahan Banu and Tan, Wen Siang (2010) Purification of His-tagged hepatitis B core antigen from unclarified bacterial homogenate using immobilized metal affinity-expanded bed adsorption chromatography. Journal of Chromatography, 1217 (21). pp. 3473-3480. ISSN 0021-9673

Yeoh, Chiou Moi and Wai, Lin Siew and Shean, Thomas Yaw Choong and Yunus, Robiah and Abdullah, Luqman Chuah (2010) Kinetic modelling for glycerolysis of palm olein. In: The 13th Asia Pacific Confederation of Chemical Engineering Congress (APCChE 2010), 5-8 October 2010, Taipei, Taiwan.

Yeoh, S. J. and Taip, Farah Saleena and Endan, Johari and A. Talib, Rosnita and Mustapa Kamal, Siti Mazlina (2010) Development of Automatic Feeding Machine for Aquaculture Industry. Pertanika Journal of Science & Technology, 18 (1). pp. 105-110. ISSN 0128-7680

Robiah Yunus (2010) Palm oil based trimethylolropane esters.

Yusof, Yus Aniza and Ng, S. K. and Chin, Nyuk Ling and A. Talib, Rosnita (2010) Compaction pressure, wall friction and surface roughness upon compaction strength of Andrographis paniculata tablets. Tribology International, 43 (5-6). pp. 1168-1174. ISSN 0301-679X

Yusof, Norjan and Hassan, Mohd Ali and Phang, Lai Yee and Tabatabaei, Meisam and Othman, Mohd Ridzuan and Mori, Masatsugu and Wakisaka, Minato and Kenji, Sakai and Yoshihito, Shirai (2010) Nitrification of ammonium-rich sanitary landfill leachate. Waste Management, 30 (1). pp. 100-109. ISSN 0956-053X

Z

Zainal Abidin @ Murad, Sumaiya and Abdullah, Luqman Chuah and Koay, Gregory Feng Ling and Ahmad, Salmiah and Choong, Thomas Shean Yaw (2010) Effect of Solvent Concentration and Cooling Modes on Morphology, Particle Size Distribution, and Yield of Dihydroxystearic Acid (DHSA) Crystals. Particulate Science and Technology, 28 (3). pp. 236-246. ISSN 0272-6351

Zakaria, Mohd Rafein and Tabatabaei, Meisam and Mohamad Ghazali, Farinazleen and Abd Aziz, Suraini and Shirai, Yoshihito and Hassan, Mohd Ali (2010) Polyhydroxyalkanoate production from anaerobically treated palm oil mill effluent by new bacterial strain Comamonas sp. EB172. World Journal of Microbiology and Biotechnology, 26 (5). pp. 767-774. ISSN 1573-0972

Zan, Zuraidah and Lowery, Arthur James (2010) Experimental demonstration of a flexible and stable semiconductor laser linewidth emulator. Optics Express, 18 (13). pp. 13880-13885. ISSN 1094-4087

Zareei, Hassan and Mohd. Yusuff, Rosnah and Syed Abdul Rashid, Sharifah Norazizan and Hussain, Mohd Rizal (2010) A conceptual framework to determine usability criteria for family of products for older Malaysians. In: 9th Pan Pacific Conference on Ergonomics (PPCOE 2010), 7 - 10 November 2010, Koahsiung, Taiwan.

Zeyad Assi, Obaid and Sulaiman, Nasri and Marhaban, M and Hamidon, Mohd Nizar (2010) Implementation of Multistructure PID-like fuzzy logic controller using FPGA. IEICE Electronics Express, 7 (3). pp. 132-137. ISSN 1349-2543

This list was generated on Sun Aug 31 12:19:32 2014 MYT.

Universiti Putra Malaysia Institutional Repository

Universiti Putra Malaysia Institutional Repository is an on-line digital archive that serves as a central collection and storage of scientific information and research at the Universiti Putra Malaysia.

Currently, the collections deposited in the IR consists of Master and PhD theses, Master and PhD Project Report, Journal Articles, Journal Bulletins, Conference Papers, UPM News, Newspaper Cuttings, Patents and Inaugural Lectures.

As the policy of the university does not permit users to view thesis in full text, access is only given to the first 24 pages only.