UPM Institutional Repository

Items where Division is "Institute of Tropical Forestry and Forest Products" and Year is 2018

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 155.

A., Atiqah and M., Jawaid and S. M., Sapuan and M. R., Ishak (2018) Mechanical and thermal properties of sugar palm fiber reinforced thermoplastic polyurethane composites: effect of silane treatment and fiber loading. Journal of Renewable Materials, 6 (5). 477 - 492.

A. M., Radzi and S. M., Sapuan and M., Jawaid and M. R., Mansor (2018) Mechanical performance of roselle/sugar palm fiber hybrid reinforced polyurethane composites. BioResources, 13 (3). 6238 - 6349. ISSN 1930-2126

A.M., Noor Azammi and S.M., Sapuan and M.R., Ishak and M.T.H., Sultan (2018) Mechanical and thermal properties of Kenaf reinforced thermoplastic polyurethane (TPU)-natural rubber (NR) composites. Fibers and Polymers, 19 (2). 446 - 451. ISSN 1229-9197, ESSN: 1875-0052

Abd Ghani, Muhammad Aizat and Ashaari, Zaidon and Bawon, Paiman and Lee, Seng Hua (2018) Reducing formaldehyde emission of urea formaldehyde-bonded particleboard by addition of amines as formaldehyde scavenger. Building and Environment, 142. 188 - 194. ISSN 0360-1323; ESSN: 1873-684X

Abd Malek, Farah Hanan and Md. Tahir, Paridah and Jawaid, Mohammad (2018) Oil palm EFB/Kenaf fibre reinforced epoxy hybrid composites: dimension stability behaviours. IOP Conference Series: Materials Science and Engineering, 368. pp. 1-9. ISSN 1757-8981; ESSN: 1757-899X

Abd Murat, Noor Azammi and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Hameed Sultan, Mohamed Thariq (2018) Conceptual design of automobile engine rubber mounting composite using TRIZ-Morphological chart-analytic network process technique. Defence Technology, 14 (4). 268 - 277. ISSN 2096-3459; ESSN: 2214-9147

Abdi, Mahnaz M. and Mohd Azli, Nur Farhana Waheeda and Lim, Hong Ngee and Md. Tahir, Paridah and Karimi, Gholamreza and Hoong, Yeoh Beng and Khorram, Mohammad (2018) Polypyrrole/tannin biobased nanocomposite with enhanced electrochemical and physical properties. RSC Advances, 8 (2018). 2978 - 2985. ISSN ESSN: 2046-2069

Abdul Laziz, A’liya and Mazlan, Norkhairunnisa and Mohd Yusoff, Mohd Zuhri and Mohamed Ariff, Azmah Hanim (2018) Review on low velocity impact of nanocomposite in addition of nanoclays. International Journal of Engineering and Technology, 7 (4 spec.13). art. no. 21351. 170 - 175. ISSN 2227-524X

Abdul Mutalib, Mohamad Ashraf and Raja Zulkifli and Sanusi, Ruzana Adibah and Tohiran, Kamil A. and Terhem, Razak and Moslim, Ramle and Norhisham, Ahmad R. and Ashton‐Butt, Adham and Azhar, Badrul (2018) Alley-cropping system can boost arthropod biodiversity and ecosystem functions in oil palm plantations. Agriculture, Ecosystems and Environment, 260 (2018). 19 - 26. ISSN 0167-8809

Abdul Whab @ Abdul Wahab, Zulfa and Kamarudin, Norizah (2018) Remotely sensed imagery data application in mangrove forest: a review. Pertanika Journal of Science & Technology, 26 (3). pp. 899-922. ISSN 0128-7680; ESSN: 2231-8526

Abdullah, Luqman Chuah and Abdi, Mahnaz M. and Mohd Azli, Nor Farhana Waheeda and Ghaemi, Ferial and Abbasian, Maryam and Kargarzadeh, Hanieh (2018) Comparative study of the electrochemical, biomedical, and thermal properties of natural and synthetics nanomaterials. Nanoscale Research Letters, 13 (112). pp. 1-8. ISSN 1556-276X; ESSN: 1931-7573

Abdullah, Luqman Chuah and Saalah, Sariah and Abdullah, Aishah and Mamat, Suhaini and Jusoh, Emiliana Rose and Awang Biak, Dayang Radiah and Salleh, Mek Zah and Basri, Mahiran (2018) Colloidal stability and rheology of jatropha oil-based waterborne polyurethane (JPU) dispersion. Progress in Organic Coatings, 125. 348 - 357. ISSN 0033-0655; ESSN: 0300-9440

Abu Bakar, Mohd Supian and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams and Ya, Hamdan (2018) Hybrid reinforced thermoset polymer composite in energy absorption tube application: a review. Defence Technology, 14 (4). 291 - 305. ISSN 2214-9147

Abu Kassim, Naziratulasikin (2018) Effect of maceration time on characteristics of acid-hydrolyzed cellulose from pineapple leaf. Masters thesis, Universiti Putra Malaysia.

Adnan, Aida (2018) Performance cost index in evaluating oil palm stem as alternative fibre material in chain of custody certification of plywood mills in Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Agrebi, Fatma and Ghorbel, Nouha and Rashid, Bushra and Kallel, Ali and Jawaid, Mohammad (2018) Influence of treatments on the dielectric properties of sugar palm fiber reinforced phenolic composites. Journal of Molecular Liquids, 263. 342 - 348. ISSN 0167-7322; ESSN: 1873-3166

Ahmad, Norlailiza and Zakaria @ Mamat, Mohd Rafein and Mohd Yusoff, Mohd Zulkhairi and Fujimoto, Shinji and Inoue, Hiroyuki and Ariffin, Hidayah and Hassan, Mohd Ali and Shirai, Yoshihoto (2018) Subcritical water-carbon dioxide pretreatment of oil palm mesocarp fiber for xylooligosaccharide and glucose production. Molecules, 23 (6). art. no. 1310. pp. 1-14. ISSN 1420-3049

Ahmad Ludin, Norasikin and Al-Alwani, Mahmoud A.M. and Mohamad, Abu Bakar and Kadhum, Abd. Amir H. and Hamid, Norul Hisham and Ibrahim, Mohd Adib and Mat Teridi, Mohd Asri and Al-Hakeem, Tarik M. Ali and Mukhlus, Abduljabbar and Sopian, Kamaruzzaman (2018) Utilization of natural dyes from Zingiber officinale leaves and Clitoria ternatea flowers to prepare new photosensitisers for dye-sensitised solar cells. International Journal of Electrochemical Science, 13. 7451 - 7465. ISSN 1452-3981

Ahmad Rizal, Nur Fatin Athirah and Ibrahim, Mohamad Faizal and Zakaria @ Mamat, Mohd Rafein and Abd. Aziz, Suraini and Phang, Lai Yee and Hassan, Mohd Ali (2018) Pre-treatment of oil palm biomass for fermentable sugars production. Molecules, 23 (6). art. no. 1381. pp. 1-14. ISSN 1420-3049

Ahmad Rizal, Nur Fatin Athirah and Ibrahim, Mohamad Faizal and Zakaria @ Mamat, Mohd Rafein and Kamal Bahrin, Ezyana and Abd. Aziz, Suraini and Hassan, Mohd Ali (2018) Combination of superheated steam with laccase pretreatment together with size reduction to enhance enzymatic hydrolysis of oil palm biomass. Molecules, 23 (4). art. no. 811. pp. 1-14. ISSN 1420-3049

Ahmad Saffian, Harmaen and Abdan, Khalina and Hassan, Mohd Ali and Ibrahim, Nor Azowa and Lee, Seng Hua and Abdul Rahman, Mohd Faizal (2018) Properties of slow release fertilizer composites made from electron beam-irradiated poly (butylene succinate) compounded with oil palm biomass and fertilizer. BioResources, 13 (4). 8677 - 8689. ISSN ESSN: 1930-2126

Ali, Mahmood and Salit, Mohd Sapuan and Karuppiah, Karmegan and Abu, Saleh Ahmed (2018) Design and development of kenaf fiber-reinforced polymer composite polytechnic chairs. Asian Journal of Agriculture and Biology, 6 (spec.). 62 - 65. ISSN 2307-8553

Alias, Aisyah Humaira and Md. Tahir, Paridah and Abdan, Khalina and Salit, Mohd Sapuan and Wahab, Md. Saidin and Berkalp, Omer Berk and Lee, Ching Hao and Lee, Seng Hua (2018) Effects of fabric counts and weave designs on the properties of laminated woven kenaf/carbon fibre reinforced epoxy hybrid composites. Polymers, 10 (12). art. no. 1320. pp. 1-19. ISSN 2073-4360

Alias, Aisyah Humaira and Md. Tahir, Paridah and Abdan, Khalina and Salit, Mohd Sapuan and Wahab, Md. Saidin and Saiman, Mohd Pahmi (2018) Evaluation of kenaf yarn properties as affected by different linear densities for woven fabric laminated composite production. Sains Malaysiana, 47 (8). pp. 1853-1860. ISSN 0126-6039

Alkateb, Mohamed and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan and Jawaid, Mohammad (2018) Vertex angles effects in the energy absorption of axially crushed kenaf fibre-epoxy reinforced elliptical composite cones. Defence Technology, 14 (4). 327 - 335. ISSN 2214-9147

Alkateb, Mohamed and Salit, Mohd Sapuan and Leman, Zulkiflle and Jawaid, Mohammad and Ishak, Mohamad Ridzwan (2018) Crushing behavior of kenaf fiber/wooden stick reinforced epoxy hybrid “green” composite elliptical tubes. Polimery, 63 (6). 436- 443. ISSN 0032-2725

Alkateb, Mohamed and Salit, Mohd Sapuan and Leman, Zulkiflle and Jawaid, Mohammad and Ishak, Mohamad Ridzwan (2018) Quasi-static crush behaviour of environmentally friendly kenaf/wool epoxy composites elliptical tube. Journal of Mechanical Engineering and Sciences, 12 (2). 3671 - 3688. ISSN 2289-4659; ESSN: 2231-8380

Ariffin, Ahmad Hamdan and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq (2018) The macro-fibre composite-bonded effect analysis on the micro-energy harvester performance and structural health-monitoring system of woven kenaf turbine blade for vertical axis wind turbine application. Advances in Mechanical Engineering, 10 (9). pp. 1-10. ISSN 1687-8140; ESSN: 1687-8140

Ariffin, Hidayah and Tengku Yasim Anuar, Tengku Arisyah and Norrrahim, Mohd Nor Faiz and Shirai, Yoshihito and Nishida, Haruo and Ando, Yoshito and Hassan, Mohd Ali (2018) Oil palm biomass as a resource for sustainable production of cellulose nanofiber. In: 2nd International Symposium on Advanced Materials and Nanotechnology (i-SAMN 2018), 15-16 Aug. 2018, The Everly Putrajaya, Malaysia. (pp. 9-10).

Arjmandi, Reza and Balakrishnan, Harintharavimal and Hassan, Azman and Jawaid, Mohammad and Othman, Alothman Y. (2018) Enhanced flame retardancy, thermal and mechanical properties of hybrid magnesium hydroxide/montmorillonite reinforced polyamide 6/polypropylene nanocomposites. Fibers and Polymers, 19 (4). 914 - 926. ISSN 1229-9197; ESSN: 1875-0052

Arockiam, Naveen Jesu and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan (2018) Selection of natural fiber for hybrid kevlar/natural fiber reinforced polymer composites for personal body armor by using analytical hierarchy process. Frontiers in Materials, 5. art. no. 52. pp. 1-13. ISSN ESSN: 2296-8016

Asad, Mohammad and Saba, Naheed and Asiri, Abdullah M. and Jawaid, Mohammad and Indarti, Eti and Wanrosli, W. D. (2018) Preparation and characterization of nanocomposite films from oil palm pulp nanocellulose / poly (Vinyl alcohol) by casting method. Carbohydrate Polymers, 191. 103 - 111. ISSN 0144-8617; ESSN: 1879-1344

Asim, Mohammad and Jawaid, Mohammad and Abdan, Khalina and Ishak, Mohammad Ridzwan (2018) The effect of silane treated fibre loading on mechanical properties of pineapple leaf/kenaf fibre filler phenolic composites. Journal of Polymers and the Environment, 26 (4). 1520 - 1527. ISSN 1566-2543; EISSN: 1572-8900

Asrofi, Mochamad and Abrar, Hairul and Putra, Yogi Kurnia and Salit, Mohd Sapuan and Kim, Hyun Joong (2018) Effect of duration of sonication during gelatinization on properties of tapioca starch water hyacinth fiber biocomposite. International Journal of Biological Macromolecules, 108. 167 - 176. ISSN 0141-8130; ESSN: 1879-0003

Azrie Safri, Syafiqah Nur and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Jayakrishna, Kandasamy (2018) Impact behaviour of hybrid composites for structural applications: a review. Composites Part B Engineering, 133. 112 - 121. ISSN 359-8368; ESSN: 1879-1069

Bajuri, Farid and Mazlan, Norkhairunnisa and Ishak, Mohamad Ridzwan (2018) Water absorption analysis on impregnated kenaf with nanosilica for epoxy/kenaf composite. IOP Conference Series: Materials Science and Engineering, 405. art. no. 012013. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Choong, Thomas Shean Yaw and Yeoh, Chiou Moi and Phuah, Eng Tong and Siew, Wai Lin and Lee, Yee Ying and Tang, Teck Kim and Abdullah, Luqman Chuah (2018) Kinetic study of lipase-catalyzed glycerolysis of palm olein using Lipozyme TLIM in solvent-free system. PLOS ONE, 13 (2). art. no. e0192375. pp. 1-13. ISSN 1932-6203

Dahali, Rasdianah and Ashaari, Zaidon and Lee, Seng Hua and Bakar, Edi Suhaimi and Salim, Sabiha (2018) Physico-mechanical properties of light red meranti (Shorea spp.) and kedondong (Canarium spp.) wood heat treated in convection oven. Journal of the Indian Academy of Wood Science, 15 (1). 41 - 44. ISSN 0972-172X; ESSN: 0976-8432

Daik, Rusli and Shamsuri, Ahmad Adlie and Ahmad, Ishak and Jumali, Mohd Hafizuddin (2018) Pengadunan berkoloid dalam penghasilan adunan termoplastik -elastomer. In: Polimer Fungsian: Cabaran Baharu & Aplikasi. Universiti Kebangsaan Malaysia Press, Bangi, Selangor, pp. 57-76. ISBN 9789674126773

Dashtizadeh, Zahra (2018) Development and characterization of recycled carbon-kenaf filled cardanol hybrid composites. Doctoral thesis, Universiti Putra Malaysia.

Dele-Afolabi, Temitope Theophilus and Mohamed Ariff, Azmah Hanim and Mazlan, Norkhairunnisa and Sobri, Shafreeza and Calin, Recep and Zahari, Nur Ismarrubie (2018) Tensile strength and corrosion resistance properties of porous Al2O3/Ni composites prepared with rice husk pore-forming agent. Ceramics International, 44 (10). 11127 - 11135. ISSN 0272-8842

Edhirej, Ahmed and Salit, Mohd Sapuan and Jawaid, Mohammad and Zahari, Nur Ismarrubie (2018) Preparation and characterization of cassava starch / peel composite film. Polymer Composites, 39 (5). 1704 - 1715. ISSN 0272-8397; ESSN: 1548-0569

Engku Hassan, Engku Nor Kamilah and Shuib, Ahmad and Kunasekaran, Puvaneswaran and Johari, Shazali and Adam, Syamimi (2018) Local community participation in ecotourism development in Tasik Kenyir, Malaysia. World Applied Sciences Journal, 36 (1). pp. 85-92. ISSN 1818-4952; ESSN: 1991-6426

Ghaemi, Ferial and Amri, Mohamad Ridzuan and Abdullah, Luqman Chuah (2018) Synthesis of metal organic framework (MOF-199) coated with cellulose nanocrystal. In: 2nd International Symposium on Advanced Materials and Nanotechnology (i-SAMN 2018), 15-16 Aug. 2018, The Everly Putrajaya, Malaysia. (pp. 30-31).

Go, Wen Ze and H'ng, Paik San and Wong, Mui Yun (2018) Evaluation of antagonism and lytic enzymes production by Trichoderma species as potential biocontrol agents against Rigidoporus microporus. In: Joint Symposium of the 8th International Agriculture Congress 2018 and 6th International Symposium for Food & Agriculture 2018 (8th IAC – 6th ISFA 2018), 13-15 Nov. 2018, Auditorium Rashdan Baba, TNCPI Building, Universiti Putra Malaysia. (pp. 273-277).

Gomes, Gorakanage Ashen Indimal and Lim, E Yee and Islam, T. and Md. Tahir, Paridah and Choo, Adrian Cheng Yong and Abdul Halip, Juliana and Gomes, Chandima and Gomes, Ashen E. and Ab Kadir, Mohd Zainal Abidin (2018) Impulse flashover characteristics of oil palm trunk (OPT) veneer plywood. In: 34th International Conference on Lightning Protection (ICLP 2018), 2-7 Sept. 2018, Rzeszow, Poland. .

Haider, Nawras Haidar Mostafa Meir Al-Said and Zahari, Nur Ismarrubie and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq (2018) Theoretical development of biaxial fabric prestressed composites under tension-tension fatigue loading. Pertanika Journal of Science & Technology, 26 (3). pp. 1253-1264. ISSN 0128-7680; ESSN: 2231-8526

Halimoon, Normala and Ahmad, Mohd Farid and Ling, Sui Kiong and Zahari, Rizal (2018) Antifungal compound isolated from Catharanthus roseus L. (pink) for bological control of root rot rubber diseases. International Journal of Analytical Chemistry. art. no. 8150610. pp. 1-7. ISSN 1687-8760; ESSN: 1687-8779

Hamid, Norul Hisham and Hassan, Nuraishah and Z., Fitri Yazid and Md. Tahir, Paridah and U., Salmiah (2018) Decay resistance of acetic, propionic and butyric anhydrides modified rubberwood against white rot (Trametes versicolor). Journal of Tropical Forest Science, 30 (2). 163 - 174. ISSN 0128-1283

Haruna, Ahmed Osumanu and Tang, Amelia and Ab. Majid, Nik Muhamad (2018) Biofertilizer potentials of cellulolytic, nitrogen-fixing, and phosphate-solubilizing bacteria. Universiti Putra Malaysia Press, Serdang, Selangor. ISBN 9789673447930

Hashemi, Fariborz and Brancheriau, Loïc and Md.Tahir, Paridah (2018) Hybridization and yarns configuration effects on flexural dynamic and static properties of pultruded hybrid kenaf/glass fiber composites. Composites Part A: Applied Science and Manufacturing, 112. 415 - 422. ISSN 1359-835X

Husin, Hazwani and Ibrahim, Mohamad Faizal and Kamal Bahrin, Ezyana and Abd Aziz, Suraini (2018) Simultaneous saccharification and fermentation of sago hampas into biobutanol by Clostridium acetobutylicum ATCC 824. Energy Science & Engineering, 7 (1). pp. 66-75. ISSN 2050-0505

Ibrahim, Nurul Shuhadah and Hassan, Azman and Mohamad, Zurina and Jawaid, Mohammad (2018) Mechanical, thermal & morphological properties of epoxy and epoxy/kenaf composites : effects of graphene content. In: 7th International Graduate Conference on Engineering, Science and Humanities (IGCESH 2018), 13-15 Aug. 2018, Convention Hall, Faculty of Built Environment and Surveying, Universiti Teknologi Malaysia. (pp. 329-331).

Ibrahim Elhag, Elroda Abdelhalim and Nuruddin, Ahmad Ainuddin and Md. Tahir, Paridah and Abdul Hamid, Hazandy (2018) Effects of irrigation treatments on biomass production of different Kenaf varieties. Asian Journal of Plant Sciences, 17 (2). 91 - 95. ISSN 1682-3974; ESSN: 1812-5697

Islam, Md. Monirul and Paul, T. K. and Nik Ab. Majid, Nik Muhamad (2018) Organic manure and inorganic fertilizer management for sustainable sweet potato (Ipomoea batatas) production. In: Joint Symposium of the 8th International Agriculture Congress 2018 and 6th International Symposium for Food & Agriculture 2018 (8th IAC – 6th ISFA 2018), 13-15 Nov. 2018, Auditorium Rashdan Baba, TNCPI Building, Universiti Putra Malaysia. (pp. 25-28).

Isma'ila, Mukhtar and Leman, Zulkiflle and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams (2018) Thermal and physicochemical properties of sugar palm fibre treated with borax. IOP Conference Series: Materials Science and Engineering, 368. art. no. 012038. pp. 1-8. ISSN 1757-8981; EISSN: 1757-899X

Ismail, Ahmad Safwan (2018) Fabrication and characterization of woven kenaf/bamboo mat fiber-reinforced epoxy hybrid composites. Masters thesis, Universiti Putra Malaysia.

Ismail, Ahmad Safwan and Jawaid, Mohammad and Hameed Sultan, Mohamed Thariq and Zakaria, Azman (2018) Preliminary study on tensile and impact properties of kenaf / bamboo fiber reinforced epoxy composites. Journal of Renewable Materials, 6. 529 - 535. ISSN 2164-6325; ESSN: 2164-6341

Ismail, Faris Syahiran and Mohamed @ Asa'ari, Ainun Zuriyati and Jawaid, Mohammad (2018) Effect of microcrystalline cellulose on the strength of oil palm empty fruit bunch paper. IOP Conference Series: Materials Science and Engineering, 368 (1). pp. 1-12. ISSN 1757-8981; ESSN: 1757-899X

Ismail, Khairul Izwan and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Mazlan, Norkhairunnisa and Ariffin, Ahmad Hamdan (2018) Tensile properties of hybrid biocomposite reinforced epoxy modified with carbon nanotube (CNT). BioResources, 13 (1). 1787 - 1800. ISSN ESSN: 1930-2126

Jalil, Abdul Majid and Abdul Hamid, Hazandy and Md. Tahir, Paridah and Mohamad Ali, Nor Azah and Jamil, Mailina and Saidin, Saidatul Husni and Lias, Sahrim (2018) Determination of Agarwood volatile compounds from selected Aquilaria species plantation extracted by Headspace-Solid Phase Microextraction (HS-SPME) method. IOP Conference Series: Materials Science and Engineering, 368 (1). pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Jamaluddin, Jamhuri and Md Sharif, Badrul Azhar and Puan, Chong Leong and Kamarudin, Norizah (2018) Estimating wildlife occurrence in Peninsular Malaysia using GWR4. Malaysian Forester, 81 (1). 55 - 63. ISSN 0302-2935

Jansar, Khairiatul Nabilah and Roslan, Ahmad Muhaimin and Hassan, Mohd Ali (2018) Appropriate hydrothermal pretreatment of oil palm biomass in palm oil mill. Pertanika Journal of Scholarly Research Reviews, 4 (1). pp. 31-40. ISSN 2462-2028

Jansar, Khairiatul Nabilah and Roslan, Ahmad Muhaimin and Hassan, Mohd Ali (2018) Review article: appropriate hydrothermal pretreatment of oil palm biomassin palm oil mill. Pertanika Journal of Scholarly Research Reviews, 4 (1). 31 - 40. ISSN 2462-2028

Jawaid, Mohammad and Jambari, Sharoul and Yahya, Mohd Yazid and Abdullah, Mohamed Ruslan (2018) Characterization of hybrid yarn/fabrics from of kenaf-kevlar fibers. Journal of Mechanical Engineering, SI 5 (4). 256 - 267. ISSN 1823-5514; ESSN: 2550-164X

Jawaid, Mohammad and Khan, Mohammad Asim and Saba, Naheed and Nasir, Mohammad and Alothman, Othman Y. and Pervaiz, Mohammed (2018) A review on phenolic resin and its composites. Current Analytical Chemistry, 14 (3). 185 - 197. ISSN 1573-4110

Jawaid, Mohammad and Sanjay, M. R. and Madhu, P. and Senthamaraikannan, P. and Senthil, S. and Pradeep, S. (2018) Characterization and properties of natural fiber polymer composites: a comprehensive review. Journal of Cleaner Production, 172. 566 - 581. ISSN 0959-6526; ESSN: 1879-1786

Jumaidin, Ridhwan and Salit, Mohd Sapuan and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and Sahari, Japar (2018) Seaweeds as renewable sources for biopolymers and its composites: a review. Current Analytical Chemistry, 14 (3). 249 - 267. ISSN 1573-4110; ESSN: 1875-6727

Kamaruddin, Norfaryanti (2018) Ownership network structure and decision-control behaviour of eight major oil palm companies in Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Kamarudin, Siti Hasnah (2018) Development of kenaf fibre poly (lactic acid) - epoxidised jatropha oil biocomposites. Doctoral thesis, Universiti Putra Malaysia.

Kamarulzaman, Nitty Hirawaty and Selamat, Jinap and Shamsudin, Mad Nasir and Mohd Azaman, Nur Nazurah (2018) Stakeholders’ knowledge, attitude, and practices towards aflatoxins contamination in peanut-based products. In: Agribusiness in Malaysia : Trends and Challenges. Universiti Putra Malaysia Press, MALAYSIA, pp. 249-256. ISBN 9789673448883

Kato Hosea, Mande and Abdullah, Ahmad Makmom and Aris, Ahmad Zaharin and Nuruddin, Ahmad Ainuddin and Liang, Niashen and Mohammad, Bose Mahmud and A., Baji and Julius, Chia and O. Deborah, Babarinsa and J. Shamang, Kasham (2018) Influence of monsoon regime and microclimate on soil respiration in the tropical forests. IOSR Journal of Environmental Science, Toxicology and Food Technology, 12 (3). 63 - 73. ISSN 2319-2399; ESSN: 2319-2402

Khan, Mohamad Asim and Md. Tahir, Paridah and Saba, Naheed and Jawaid, Mohammad and Alothman, Othman Y. and Nasir, M. and Almutairi, Z. (2018) Thermal, physical properties and flammability of silane treated kenaf/ pineapple leaf fibres phenolic hybrid composites. Composite Structures, 202. 1330 - 1338. ISSN 0263-8223; ESSN: 1879-1085

Khan, Mohammad Asim and Jawaid, Mohammad and Abdan, Khalina and Mohamed Nasir (2018) Effect of alkali treatments on physical and mechanical strength of pineapple leaf fibres. IOP Conference Series: Materials Science and Engineering, 290 (1). pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Khan, Mohammad Asim and Jawaid, Mohammad and Nasir, Mohammed and Saba, Naheed (2018) Effect of fiber loadings and treatment on dynamic mechanical, thermal and flammability properties of pineapple leaf fiber and kenaf phenolic composites. Journal of Renewable Materials, 6 (4). 383 - 393. ISSN 2164-6325; ESSN: 2164-6341

Khoo, Pui San and H'ng, Paik San and Chin, Kit Ling and Bakar, Edi Suhaimi and Maminski, Mariusz and Raja Ahmad, Raja Nazrin and Lee, Chuan Li and Rosli, Siti Nurul Ashikin and Saharudin, Mohd Hizami (2018) Peeling of small diameter rubber log using spindleless lathe technology: evaluation of veneer properties from outer to inner radial section of log at different veneer thicknesses. European Journal of Wood and Wood Products, 76. 1335 - 1346. ISSN 0018-3768; ESSN: 1436-736X

Lau, Kia Kian and Jawaid, Mohammad and Ariffin, Hidayah and Karim, Zoheb (2018) Isolation and characterization of nanocrystalline cellulose from roselle-derived microcrystalline cellulose. International Journal of Biological Macromolecules, 114. 54 - 63. ISSN 0141-8130, ESSN: 1879-0003

Lee, Ching Hao and Salit, Mohd Sapuan and Hassan, Mohd Roshdi (2018) Thermal analysis of kenaf fiber reinforced floreon biocomposites with magnesium hydroxide flame retardant filler. Polymer Composites, 39 (3). 869 - 875. ISSN 0272-8397; EISSN: 1548-0569

Lee, Chuan Li and H'ng, Paik San and Md Tahir, Paridah and Chin, Kit Ling and Rashid, Umer and Maminski, Mariusz and Go, Wen Ze and Raja Nazrin, Raja Ahmad and Rosli, Siti Nurul Asyikin and Khoo, Pui San (2018) Production of bioadsorbent from phosphoric acid pretreated palm kernel shell and coconut shell by two-stage continuous physical activation via N₂ and air. Royal Society Open Science, 5. pp. 1-19. ISSN ESSN: 2054-5703

Lee, Pay Chiann and Muniandi, Sures Kumar and Ab Shukor, Nor Aini (2018) In vitro regeneration of bamboo species. Pertanika Journal of Scholarly Research Reviews, 4 (3). pp. 80-88. ISSN 2462-2028

Lee, Seng Hua and Ashaari, Zaidon and Ang, Aik Fei and Abdul Halip, Juliana and Lum, Wei Chen and Dahali, Rasdianah and Halis, Rasmina (2018) Effects of two-step post heat-treatment in palm oil on the properties of oil palm trunk particleboard. Industrial Crops and Products, 116. 249 - 258. ISSN 0926-6690

Lee, Seng Hua and Ashaari, Zaidon and Lum, Wei Chen and Abdul Halip, Juliana and Ang, Aik Fei and Tan, Li Peng and Chin, Kit Ling and Md Tahir, Paridah (2018) Thermal treatment of wood using vegetable oils: a review. Construction and Building Materials, 181. 408 - 419. ISSN 0950-0618; ESSN: 1879-0526

MA, Hossain and SM, Kumar and G, Seca and AA, Maheran and Ab Shukor, Nor Aini (2018) Mass propagation of dendrocalamus asper by branch cutting. Journal of Tropical Forest Science, 30 (1). 82 - 88. ISSN 0128-1283

Manimaran, P. and Senthamaraikannan, P. and Sanjay, M. R. and Marichelvam, M. K. and Jawaid, Mohammad (2018) Study on characterization of Furcraea foetida new natural fiber as composite reinforcement for lightweight applications. Carbohydrate Polymers, 181. 650 - 658. ISSN 0144-8617; ESSN: 1879-1344

Md Tahir, Paridah and Abdul Halip, Juliana (2018) Adhesion characteristics of kenaf fibers. In: Kenaf Fibers and Composites. CRC Press, Florida, pp. 37-60. ISBN 9781498753425; EISBN 9781498753432 .

Md Tahir, Paridah and Abdul Halip, Juliana and Lee, Seng Hua (2018) Resistance of Laminated Veneer Lumber (LVL) produced from rubberwood, radiata pine and larch against Subterranean termites and white rot fungi. Current Investigations in Agriculture and Current Research, 3 (1). pp. 296-298. ISSN 2637-4676

Md Tahir, Paridah and Moradbak, Amin and Mohamed, Ainun Zuriyati and Mustapha, Asniza and Taiwo Owolabi, Folahan Abdulwahab and H. P. S., Abdul Khalil (2018) Alkaline Sulfite Anthraquinone and Methanol (ASAM) pulping process of tropical bamboo (Gigantochloa scortechinii). In: Bamboo - Current and Future Prospects. IntechOpen, United Kingdom, pp. 9-24. ISBN 9781789232301

Mohamed @ Asa'ari, Ainun Zuriyati and Muhammad, K. I. and Halis, Rasmina and H. A., Hazwani and A., Sharmiza and Abu Kassim, Naziratulasikin and Latifah, J. (2018) Effect of chemical pretreatment on pulp and paper characteristics of bamboo gigantochloa scorthechinii kraft fibers. IOP Conference Series: Materials Science and Engineering, 368. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Mohamed Biran, Nurhajirah and Mohd Yusoff, Mohd Zulkhairi and Maeda, Toshinari and Zakaria, Mohd Rafein and Yee, Lian Ngit and Hassana, Mohd Ali (2018) Triple knockout of frdC gltA and pta genes enhanced PHA production in Escherichia coli. Asia-Pacific Journal of Molecular Biology and Biotechnology, 26 (1). pp. 11-18. ISSN 0128-7451; EISSN: 2672-7277

Mohamed Yusoff, Mohd Zuhri and Nasrudin, Muhammad Asyraf and Salit, Mohd Sapuan and Hassan, Mohamad Zaki (2018) Effect of cell size on the compressive properties of interlocking flax composite structures. In: 5th Mechanical Engineering Research Day (MERD'18), 3 May 2018, Kampus Teknologi UTeM, Melaka. (pp. 254-255).

Mohammad Suffian James, Redzuan (2018) Effects of surface treatment on the wettability and finishing properties of Acacia mangium Willd. wood. Masters thesis, Universiti Putra Malaysia.

Mohd Afdzaluddin, Atiqah (2018) Properties of sugar palm/glass fibre-reinforced thermoplastic polyurethane composites. Doctoral thesis, Universiti Putra Malaysia.

Mohd Afdzaluddin, Atiqah and Jawaid, Mohammad and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan (2018) Effect of surface treatment on the mechanical properties of sugar palm/glass fiber-reinforced thermoplastic polyurethane hybrid composites. BioResources, 13 (1). 1174 - 1188. ISSN 1930-2126

Mohd Nooh, Hisham and Masomian, Malihe and Salleh, Abu Bakar and Mohamad, Rosfarizan and Mohamad Ali, Mohd Shukuri and Raja Abdul Rahman, Raja Noor Zaliha (2018) Production of thermostable T1 lipase using agro-industrial waste medium formulation. Catalysts, 8 (11). pp. 1-18. ISSN 2073-4344; ESSN: 2073-4344

Mohd Noor, Mohd Iqbal (2018) Environmental and social assessments of an Island Marine Park in Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Mohd Nor, Ariff Farhan and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Abu Talib, Abd. Rahim and Rayney Azmi, Ahmad Mustafa and Harmaen, Ahmad Saffian and Mohamed Asa’ari, Ainun Zuriyati (2018) The effects of multi-walled CNT in bamboo/glass fibre hybrid composites: tensile and flexural properties. BioResources, 13 (2). 4404 - 4415. ISSN 1930-2126

Mohd Yusof, Norwahyuni (2018) Physico-mechanical properties of cross-laminated timber manufactured from Acacia mangium Willd. wood. Masters thesis, Universiti Putra Malaysia.

Mokhtar Baharudin, Muhammad Shafiq and Ibrahim, Rahinah and Abdan, Khalina and Rashidi, Ali (2018) Feasibility of green commercial vertical system for climbing food plant in urban area. ALAM CIPTA, International Journal on Sustainable Tropical Design Research & Practice, 11 (2). pp. 12-18. ISSN 1823-7231

Moniri, Mona and Boroumand Moghaddam, Amin and Azizi, Susan and Abdul Rahim, Raha and Saad, Wan Zuhainis and Navaderi, Mohammad and Mohamad, Rosfarizan (2018) In vitro molecular study of wound healing using biosynthesized bacteria nanocelluse/silver nanocomposite assisted by bioinformatics databases. International Journal of Nanomedicine, 13. 5097 - 5122. ISSN 1176-9114; ESSN: 1178-2013

Moradbak, Amin and M. Tahir, Paridah and Mohamed, Ainun Zuriyati and M.Abdi, Mahnaz and Razalli, Rawaida Liyana and Halis, Rasmina (2018) Isolation of cellulose nanocrystals from Gigantochloa scortechinii ASAM pulp. European Journal of Wood and Wood Products, 76 (2017). 1021 - 1027. ISSN 0018-3768, ESSN: 1436-736X

Muhammad, Noryani and Salit, Mohd Sapuan and Mohammad Taha, Mastura and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams (2018) A statistical framework for selecting natural fibre reinforced polymer composites based on regression model. Fibers and Polymers, 19 (5). pp. 1039-1049. ISSN 1229-9197; ESSN: 1875-0052

Muniandi, Sures Kumar and Hossain, Md. Aktar and Abdullah, Mohd. Puad and Ab Shukor, Nor Aini (2018) Gibberellic acid (GA3) affects growth and development of some selected kenaf (Hibiscus cannabinus L.) cultivars. Industrial Crops and Products, 118. 180 - 187. ISSN 0926-6690

Nasrudin, Nurul Reffa Azyan and Mazlan, Norkhairunnisa and Mohd Basri, Mohd Salahuddin and Mohamed Ariff, Azmah Hanim and Mohd. Nasir, Noor Azline (2018) Thermogravimetric analysis on rice husk ashes-based geopolymer paste. IOP Conference Series: Materials Science and Engineering, 405. art. no. 012014. pp. 1-7. ISSN 1757-8981; EISSN: 1757-899X

Noor Megashah, Liana and Ariffin, Hidayah and Zakaria, Mohd Rafein and Hassan, Mohd Ali (2018) Multi-step pretreatment as an eco-efficient pretreatment method for the production of cellulose nanofiber from oil palm empty fruit bunch. Asia-Pacific Journal of Molecular Biology and Biotechnology, 26 (2). pp. 1-8. ISSN 0128-7451

Norrrahim, Mohd Nor Faiz and Ariffin, Hidayah and Tengku Yasim Anuar, Tengku Arisyah and Ghaemi, Ferial and Hassan, Mohd Ali and Ibrahim, Nor Azowa and Lim, Janet Hong Ngee and Wan Yunus, Wan Md Zin (2018) Superheated steam pretreatment of cellulose affects its electrospinnability for microfibrillated cellulose production. Cellulose, 25 (7). 3853 - 3859. ISSN 0969-0239; ESSN: 1572-882X

Nuruddin, Ahmad Ainuddin and Asari, Nur Haifaa’ Izwa and Hamid, Hazandy Abdul and Ismail, Mohd Kamil (2018) Carbon dioixide emission on recurrent burnt peat swamp forest in Raja Musa Forest Reserve, Selangor, Malaysia. In: Advances in Forest Fire Research. Imprensa da Universidade de Coimbra, Coimbra, Portugal, 1254 - 1258. ISBN 9789892616506

Omar, Latifah and Ahmed, Osumanu Haruna and Nik Ab. Majid, Nik Muhamad (2018) Improving nutrient use efficiency of maize cultivated on a tropical acid soil using clinoptilolite zeolite. In: Joint Symposium of the 8th International Agriculture Congress 2018 and 6th International Symposium for Food & Agriculture 2018 (8th IAC – 6th ISFA 2018), 13-15 Nov. 2018, Auditorium Rashdan Baba, TNCPI Building, Universiti Putra Malaysia. (pp. 227-230).

Omar, Latifah and Haruna, Ahmed Osumanu and Abdul Majid, Nik Muhamad (2018) Soil pH buffering capacity and nitrogen availability following compost application in a tropical acid soil. Compost Science and Utilization, 26 (1). pp. 1-15. ISSN 1065-657X; ESSN: 2326-2397

Patek Mohd, Nur Nazirah and Abdu, Arifin and Jusop, Shamshuddin and Abdul Hamid, Hazandy and Karim, Md. Rezaul and Nazrin, Mohammad and Basri, Mohd Hadi Akbar and Jamaluddin, Aiza Shaliha (2018) Potentiality of melastoma malabathricum as phytoremediators of soil with sewage sludge. Scientia Agricola, 75 (1). 27 - 35. ISSN 0103-9016; ESSN: 1678-992X

Pilla, Phillcaine and Puan, Chong Leong and Lim, Voon Ching and Md Sharif, Badrul Azhar and Hussin, Mohamed Zakaria (2018) Sunda scops-owl density estimation via distance sampling and call playback. Sains Malaysiana, 47 (3). pp. 441-446. ISSN 0126-6039

Puan, Chong Leong and Ng, Wei Lun and Yong, Christina Seok Yien and Abdl Jalil, Norehan (2018) Morphometric sexing of little spiderhunter (Arachnothera longirostra) in Peninsular Malaysia. Pertanika Journal of Tropical Agricultural Science, 41 (1). pp. 333-340. ISSN 1511-3701; ESSN: 2231-8542

R.A., Ilyas and S.M., Sapuan and M.R., Ishak (2018) Isolation and characterization of nanocrystalline cellulose from sugar palm fibres (Arenga Pinnata). Carbohydrate Polymers, 181. 1038 - 1051. ISSN 0144-8617, ESSN: 1879-1344

Rajesh, Murugan and Hameed Sultan, Mohamed Thariq and Uthayakumar, Marimuthu and Jayakrishna, Kandasamy and Md Shah, Ain Umaira (2018) Dynamic behaviour of woven bio fiber composite. BioResources, 13 (1). 1951 - 1960. ISSN 1930-2126

Ramli, Fatin and Samdin, Zaiton and Abd. Ghani, Awang Noor and Mohamad Kasim, Mohamad Roslan (2018) Factors affecting users' perception towards conservation of biodiversity in Matang Mangrove Forest Reserve (MMFR), Perak, Malaysia. International Journal of Business and Society, 19 (S1). pp. 26-36. ISSN 1511-6670

Ramli, N and Mazlan, Norkhairunnisa and Ando, Yoshito and Leman, Z. (2018) Natural fiber for green technology in automotive industry: a brief review. IOP Conference Series: Materials Science and Engineering, 368 (2018). 1-Aug.

Rashidi, Saba (2018) Stability and thermal conductivity of multi-walled carbon nanotube nanofluid. Doctoral thesis, Universiti Putra Malaysia.

Rashidi, Saba and Abdullah, Luqman Chuah and Walvekar, Rashmi Gangasa and Khalid, Mohammad and Ahmadun, Fakhru'l-Razi and Md. Yasin, Faizah (2018) Effect of morphology of MWCNT on stability enhancement of nanofluids by using PVA surfactant. In: 2nd International Symposium on Advanced Materials and Nanotechnology (i-SAMN 2018), 15-16 Aug. 2018, The Everly Putrajaya, Malaysia. (pp. 74-75).

Rayney Azmi, Ahmad Mustafa and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Abu Talib, Abd Rahim and Mohd Nor, Ariff Farhan (2018) Tensile and flexural properties of a newly developed bulletproof vest using a kenaf/x-ray film hybrid composite. BioResources, 13 (2). 4416 - 4427. ISSN ESSN: 1930-2126

Razali, Nadlene and Salit, Mohd Sapuan and Jawaid, Mohammad and M. R., Ishak and L., Yusriah (2018) The effects of chemical treatment on the structural and thermal, physical, and mechanical and morphological properties of roselle fiber-reinforced vinyl ester composites. Polymer Composites, 39 (1). 274 - 287. ISSN 0272-8397; ESSN: 1548-0569

Rizal, Samsul and Mustafa, Azniza and Taiwo, Owolabi Folahan Abdulwahab and Abdul Khalil, H. P. S. and Tye, Ying Ying and Fizree, H. M. and Abdullah, C. K. and Uthaya Kumar, U. Seeta and Md. Tahir, Paridah (2018) Enhancement of the physical, mechanical, and thermal properties of epoxy-based bamboo nanofiber nanocomposites. BioResources, 13 (4). 7709 - 7725. ISSN 1930-2126

Rushdan, Ahmad Ilyas and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams (2018) Development and characterization of sugar palm nanocrystalline cellulose reinforced sugar palm starch bionanocomposites. Carbohydrate Polymers, 202. 186 - 202. ISSN 0144-8617; ESSN: 1879-1344

Saba, Naheed and Md. Tahir, Paridah and Jawaid, Mohammad and Alothman, O. Y. (2018) Thermal and flame retardancy behavior of oil palm based epoxy nanocomposites. Journal of Polymers and the Environment, 26 (5). 1844 - 1853. ISSN 1566-2543; EISSN: 1572-8900

Salit, Mohd Sapuan and Jaafar, J. and Siregar, Januar Parlaungan and Tezara, C. and Hamdan, M. R. M. (2018) Characterization of cassava biopolymers and the determination of their optimum processing temperatures. Plastics, Rubber and Composites, 47 (10). 447 - 457. ISSN 1743-2898; ESSN: 1465-8011

Salman, Suhad D. and Leman, Zulkifli and Ishak, Mohamad Ridzwan and Hameed Sultan, Mohamed Thariq and Cardona, F. (2018) Quasi-static penetration behavior of plain woven kenaf/aramid reinforced polyvinyl butyral hybrid laminates. Journal of Industrial Textiles, 47 (7). 1427 - 1446. ISSN 1528-0837; ESSN: 1530-8057

Samdin, Zaiton and Md. Tahir, Paridah and Abdul Hamid, Hazandy and Azim, R. A. R. A. (2018) Potential of eucalyptus plantation in Malaysia. Malaysian Forester, 81 (1). 64 - 72. ISSN 0302-2935

Senthilkumar, K. and Saba, N. and Rajini, N. and Chandrasekar, M. and Jawaid, M. and Siengchin, Suchart and Alotmane, Othman Y. (2018) Mechanical properties evaluation of sisal fibre reinforced polymer composites: a review. Construction and Building Materials, 174. 713 - 729. ISSN 0950-0618, ESSN: 1879-0526

Shafi, Ayu Rafiqah and Abdan, Khalina and Ahmad Saffian, Harmaen and Mohd Dahlan, Khairul Zaman and Jawaid, Mohammad and Lee, Ching Hao (2018) Effect of modified tapioca starch on mechanical, thermal, and morphological properties of PBS blends for food packaging. Polymers, 10 (11). pp. 1-13. ISSN 2073-4360

Shaharuzaman, Mohd Adrinata and Salit, Mohd Sapuan and Mansor, Muhd Ridzuan and Mohamed Yusoff, Mohd Zuhri (2018) Passenger cars side door impact beam: a review. Journal of Engineering and Technology, 9 (1). pp. 1-22. ISSN 2180-3811; ESSN: 2289-814X

Shaharuzaman, Mohd Adrinata and Salit, Mohd Sapuan and Mansor, Muhd Ridzuan and Mohamed Yusoff, Mohd Zuhri (2018) Prioritizing the product design specification of side-door impact beam using analytic hierarchy process method. In: 5th Mechanical Engineering Research Day (MERD'18), 3 May 2018, Kampus Teknologi UTeM, Melaka. (pp. 34-35).

Shahroze Ali, Rao Muhammad and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Leman, Zulkiflle and Khan, Mohammad Asim and Muthukumar, Chandrasekar (2018) Effect of organo-modified nanoclay on the mechanical properties of sugar palm fiber-reinforced polyester composites. BioResources, 13 (4). 7430 - 7444. ISSN 1930-2126

Shamsuri, Ahmad Adlie (2018) Compatibilization potential of ionic liquid-based surfactants for polymer blends. Academic Journal of Polymer Science, 1 (2). pp. 1-2.

Shawkataly, Abdul Khalil H. P. and Chong, Eunice Wan Ni and Owolabi, Folahan Abdulwahab Taiwo and Mustapha, Asniza and Tye, Ying Ying and Tajarudin, Husnul Azan and Md Tahir, Paridah and Rizal, Samsul (2018) Microbial-induced CaCO3 filled seaweed-based film for green plasticulture application. Journal of Cleaner Production, 199. 150 - 163. ISSN 0959-6526; ESSN: 1879-1786

Siakeng, R. and Jawaid, Mohammad and Ariffin, Hidayah and Salit, Mohd Sapuan (2018) Physical properties of coir and pineapple leaf fibre reinforced polylactic acid hybrid composites. IOP Conference Series: Materials Science and Engineering, 290. art. no. 012031. pp. 1-9. ISSN 1757-8981; ESSN: 1757-899X

Siakeng, Ramengmawii (2018) Characterization of coir/pineapple leaf fibre- reinforced polylactic acid hybrid composites for potential food tray applications. Doctoral thesis, Universiti Putra Malaysia.

Siakeng, Ramengmawii and Jawaid, Mohammad and Ariffin, Hidayah and S. M., Sapuan and Asim, Mohammad and Saba, Naheed (2018) Natural fiber reinforced polylactic acid composites: a review. Polymer Composites, 40 (2). pp. 446-463. ISSN 0272-8397; ESSN: 1548-0569

Siddiqui, Mohammad Khalid and Ratnam, Chantara Thevy and Abdullah, Luqman Chuah and Walvekar, Rashmi and Ching, Yern Chee and Ketabchi, Mohammad Reza (2018) Mechanical and physical performance of cowdung-based polypropylene biocomposites. Polymer Composites, 39 (1). 288 - 296. ISSN 0272-8397; ESSN: 1548-0569

Sigau, Cindy Usun and Abdul Hamid, Hazandy (2018) Soil CO2 efflux of oil palm and rubber plantation in 6-year-old and 22-year-old chronosequence. Pertanika Journal of Tropical Agricultural Science, 41 (3). pp. 1217-1231. ISSN 1511-3701; ESSN: 2231-8542

Sivaranjana, P. and Nagarajan, E. R. and Rajini, N. and Jawaid, Mohammad and Rajulu, A. Varada (2018) Formulation and characterization of in situ generated copper nanoparticles reinforced cellulose composite films for potential antimicrobial applications. Journal of Macromolecular Science Part A-Pure and Applied Chemistry, 55 (1). 58 - 65. ISSN 1060-1325; ESSN: 1520-5738

Subramaniam, Thanam and Samdin, Zaiton and Ramachandran, Sridar and Puvaneswaran, Kunasekaran (2018) Shifting from experience economy to memorable tourism experience: an overview from ecotourism. Advanced Science Letters, 24 (5). 3343 - 3346. ISSN 1936-6612; ESSN: 1936-7317

Sulok, Kevin Muyang Tawie and Ahmed, Osumanu Haruna and Choy, Yuen Khew and Mercer Zehnder, Jarroop Augustine (2018) Introducing natural farming in black pepper (Piper nigrum L.) cultivation. International Journal of Agronomy, 2018. pp. 1-6. ISSN 1687-8159, ESSN: 1687-8167

Suraya, Noorul Linda M. and Taiwo, Owolabi Folahan Abdulwahab and Abdul Khalil, H.P. Shawkataly and Saurabh, Chaturbhuj Kumar and Md. Tahir, Paridah and Rizal Samsul, M. Asniza (2018) Synergistic effect of oil palm based pozzolanic materials/oil palm waste on polyester hybrid composite. Journal of Polymers and the Environment, 26. 4063 - 4072. ISSN 1566-2543; ESSN: 1572-8900

Tan, Li Peng and Hamdan, Ruhil Hayati and Mohamed, Maizan and Choong, Siew Shean and Chan, Yean Yean and Lee, Seng Hua (2018) Antibacterial activity and toxicity of Duckweed, Lemna minor L. (Arales: Lemnaceae) from Malaysia. Malaysian Journal of Microbiology, 14 (5). 387 - 392. ISSN 1823-8262; ESSN: 2231-7538

Temitope T., Dele-Afolabi and Mohamed Ariff, Azmah Hanim and Mazlan, Norkhairunnisa and Sobri, Shafreeza and Zahari, Nur Ismarrubie (2018) Significant effect of rice husk and sugarcane bagasse pore formers on the microstructure and mechanical properties of porous Al2O3/Ni composites. Journal of Alloys and Compounds, 743. 323 - 331. ISSN 0925-8388; ESSN: 1873-4669

Tengku Yasim Anuar, Tengku Arisyah (2018) Cellulose nanofibers from oil palm mesocarp fiber and their utilization as reinforcement material in low density polyethylene composites. Doctoral thesis, Universiti Putra Malaysia.

Tharwani, Intidhar Jabir Idan and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Md. Jamil, Siti Nurul Ain (2018) Equilibrium, kinetics and thermodynamic adsorption studies of acid dyes on adsorbent developed from kenaf core fiber. Adsorption Science and Technology, 36 (1-2). 694 - 712. ISSN 0263-6174; ESSN: 2048-4038

Thiagamani, Senthil Muthu Kumar and Rajini, N. and Jawaid, Mohammad and Rajulu, A. Varada and Winowlin Jappes, J. T. (2018) Preparation and properties of cellulose / tamarind nut powder green composites. Journal of Natural Fibers, 15 (1). pp. 11-20. ISSN 1544-0478; ESSN: 1544-046X

Tuan Naiwi, Tuan Syarifah Rossyidah and Aung, Min Min and Ahmad, Azizan and Rayung, Marwah and Su'ait, Mohd Sukor and Yusof, Nor Azah and Lae, Khine Zar Wynn (2018) Enhancement of plasticizing effect on bio-based polyurethane acrylate solid polymer electrolyte and its properties. Polymers, 10 (10). pp. 1-19. ISSN 2073-4360

Uyup, Mohd Khairun Anwar and Yusoh, Alia Syahirah and K., Tumirah and H., Hamdan and Md. Tahir, Paridah (2018) Properties of water-borne coating incorporate with nanoclay. IOP Conference Series: Materials Science and Engineering, 368. pp. 1-5. ISSN 1757-8981; ESSN: 1757-899X

Wahid Marican, Nurshahirah (2018) Local community’s intention to participate in sustainable mangrove forest program in Malaysia. Masters thesis, Universiti Putra Malaysia.

Wahid Marican, Nurshahirah and Mohd Nawi, Nolila and Kamarulzaman, Nitty Hirawaty and Samdin, Zaiton (2018) Public perception towards sustainable mangrove forest programs in Malaysia. Journal of Sustainability Science and Management, 13 (1). 189- 199. ISSN 1823-8556

Wong, Charmaine Andrea (2018) Pro-environmental behaviour among primary school children in the West Coast of Sabah, Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Yahaya, Ridwan and Salit, Mohd Sapuan and Mohammad, Jawaid and Leman, Zulkiflle and Zainudin, Edi Syams (2018) Review of kenaf reinforced hybrid biocomposites: potential for defence applications. Current Analytical Chemistry, 14 (3). 226 - 240. ISSN 1573-4110; EISSN: 1875-6727

Zahari, Rozihawati and Ab Shukor, Nor Aini and Abdullah, Norhayati (2018) Effect of a misting system and rooting media of Labisia pumila cuttings. Asian Journal of Pharmacology, 2 (4). 13 - 18. ISSN 0128-1119

Zakaria, Muhammad Azman and Mohd Yusoff, Mohd Zulkhairi and Zakaria @ Mamat, Mohd Rafein and Hassan, Mohd Ali and Wood, Thomas K. and Maeda, Toshinari (2018) Pseudogene product YqiG is important for pflB expression and biohydrogen production in Escherichia coli BW25113. 3 Biotech, 8 (10). pp. 1-8. ISSN 2190-572X; ESSN: 2190-5738

Zin, Mohd Hanafee and Abdan, Khalina and Norizan, Mohd Nurazzi and Mazlan, Norkhairunnisa (2018) The effects of alkali treatment on the mechanical and chemical properties of banana fibre and adhesion to epoxy resin. Pertanika Journal of Science & Technology, 26 (1). pp. 161-176. ISSN 0128-7680; ESSN: 2231-8526

This list was generated on Fri Mar 29 06:41:29 2024 +08.