Items where Division is "Faculty of Engineering" and Year is 2012

Group by: Creators | Item Type | No Grouping

Jump to: Article | Book Section | Conference or Workshop Item | Patent | Thesis

Number of items: 537.

Article

Abas, Ahmad Fauzi and Muhammad Noor, Ahmad Shukri and Mahdi, Mohd Adzir and Hisham, Hisham Kadhum and Mahdiraji, Ghafour Amouzad (2012) Characterization of Small-Signal Intensity Modulation of Single-Mode Fiber grating Fabry¿Perot Laser Source. Optical Review, 19 (2). pp. 64-70. ISSN 1340-6000

Abas, Ahmad Fauzi and Muhammad Noor, Ahmad Shukri and Mahdi, Mohd Adzir and Hisham, Hisham Kadhum and Mahdiraji, Ghafour Amouzad (2012) Characterization of phase noise in a single-mode fiber grating Fabry-Perot laser. Journal of Modern Optics, 59 (4). pp. 393-401. ISSN 0950-0340

Abas, Ahmad Fauzi and Muhammad Noor, Ahmad Shukri and Mahdi, Mohd Adzir and Hisham, Hisham Kadhum and Mahdiraji, Ghafour Amouzad (2012) Relative Intensity Noise Reduction by Optimizing Fiber Grating Fabry-Perot Laser Parameters. IEEE Journal of Quantum Electronics, 48 (3). pp. 375-383. ISSN 0018-9197

Abdul Hanan, Umar and Zainudin, Edi Syams and Salit, Mohd Sapuan (2012) Effect of accelerated weathering on tensile properties of kenaf reinforced high-density polyethylene composites. Journal of Mechanical Engineering and Sciences, 2. pp. 198-205. ISSN 2289-4659; ESSN: 2231-8380

Abdullah, Abdul Hakim and Alias, Siti Khadijah and Jenal, Norhisyam and Abdan, Khalina and Ali, Aidy (2012) Fatigue behavior of kenaf fibre reinforced epoxy composites. Engineering Journal, 16 (5). pp. 105-113. ISSN 0125-8281

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin and Abdul Aziz, Nuraini (2012) A comprehensive review of experimental approaches used in the measurement of springback. Advances in Natural and Applied Sciences, 6 (2). pp. 195-205. ISSN 1995-0772; ESSN: 1998-1090

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin and M. Tandur, Khaleed Hussain and Abdul Aziz, Nuraini (2012) Geometrical error analysis of a cold forged AUV propeller blade using optical measurement method. Advanced Materials Research, 383-390. pp. 7117-7121. ISSN 1022-6680; ESSN: 1662-8985

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin and M. Tandur, Khaleed Hussain and Abdul Aziz, Nuraini (2012) Investigation of geometrical defect of AA6061-T4 cold embossing using FEM. Applied Mechanics and Materials, 110-116. pp. 2337-2341. ISSN 1660-9336; ESSN: 1662-7482

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin and M. Tandur, Khaleed Hussain and Abdul Aziz, Nuraini (2012) Prediction of geometric defects in the cold embossing of AA6061 aluminium alloy by finite element analysis. Scientific Research and Essays, 7 (15). art. no. 8E1AAF329897. pp. 1630-1638. ISSN 1992-2248

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin and M. Tandur, Khaleed Hussain and Husaini, Muhamad and Abdul Aziz, Nuraini (2012) Twist springback measurement of AUV propeller blade based on profile deviation. Advanced Materials Research, 512-515. pp. 1840-1844. ISSN 1022-6680; ESSN: 1662-8985

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin and Tandur, Khaleed Hussain M. and Abdul Aziz, Nuraini (2012) Manufacturing of AA6061 propeller for AUV application using cold forging process. Scientific Research and Essays, 7 (2). art. no. 6D12F8327454. pp. 170-176. ISSN 1992-2248

Abu Bakar, Muhammad Hafiz and Mahamd Adikan, Faisal Rafiq and Mahdi, Mohd Adzir (2012) Rayleigh-based Raman fiber laser with passive erbium-doped fiber for secondary pumping effect in remote L-band erbium-doped fiber amplifier. IEEE Photonics Journal, 4 (3). pp. 1042-1050. ISSN 1943-0655

Abu Hassan, Muhammad Rosdi and Abu Bakar, Muhammad Hafiz and Dambul, Katrina D. and Mahamd Adikan, Faisal Rafiq (2012) Optical-based sensors for monitoring corrosion of reinforcement rebar via an etched cladding Bragg grating. Sensors, 12 (11). pp. 15820-15826. ISSN 1424-8220

Abu Talib, Abd. Rahim and Zahari, Rizal and Mohd Rafie, Azmin Shakrine (2012) Experimental and numerical simulation of energy absorption on composite Kevlar29/Polyester under high velocity impact. Journal of Advanced Science and Engineering Research, 2 (2012). pp. 52-67. ISSN 2231-8844

Agung, Efriyo Hadi and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Mohd Dahlan, Khairul Zaman and Mustofa, Usman (2012) Effects of composition parameters on tensile and thermal properties of abaca fibre reinforced high impact polystyrene composites. Pertanika Journal of Science & Technology, 20 (2). pp. 415-423. ISSN 0128-7680; ESSN: 2231-8526

Ahmad, Bilal A. and Al-Alimi, Abdulmoghni Ali Wazae and Abas, Ahmad Fauzi and Mokhtar, Makhfudzah and Harun, Sulaiman Wadi and Mahdi, Mohd Adzir (2012) Double spacing multi-wavelength L-band Brillouin erbium fiber laser with Raman pump. Journal of Modern Optics, 59 (19). pp. 1690-1694. ISSN 0950-0340; ESSN: 1362-3044

Ahmad, Desa and Hamid, Akhir and Rukunnuddin, Ibni Hajar (2012) Farm layout and planting system for sweetpotato production in Malaysia. Agricultural Mechanization in Asia, Africa and Latin America, 43 (1). pp. 44-51. ISSN 0084-5841

Ahmad, Desa and Othman, Jamarei and Sulaiman, Shamsuddin and Hashemi, Ali (2012) Development and Testing of a New Tillage Apparatus. Journal of Agricultural Science, 4 (7). pp. 103-110. ISSN 1916-9752

Ahmad, Kamarul Arifin and Zubair, Mohammed and Abdullah, Mohammed Zulkifly and Ismail, Rushdan and Shuaib, Ibrahim Lutfi and Abdul Hamid, Suzina (2012) Review: A critical overview of limitations CFD Modeling in nasal airflow. Journal of Medical and Biological Engineering, 32 (2). pp. 77-84. ISSN 1609-0985

Ahmad Bari, Nor Azmi and Abdullah, Nor Ainah and Yusuff, Rosnah and Ismail, Napsiah and Jaapar, Aini (2012) Environmental awareness and benefits of industrialized building systems (IBS). Procedia - Social and Behavioral Sciences, 50. pp. 392-404. ISSN 1877-0428

Ahmad Bari, Nor Azmi and Mohd Yusuff, Rosnah and Ismail, Napsiah and Jaapar, Aini and Ahmad, Rizan (2012) Factors influencing the construction cost of Industrialised Building System (IBS) projects. Procedia - Social and Behavioral Sciences, 35. pp. 689-696. ISSN 1877-0428

Ahmadun, Fakhru'l-Razi and Danafar, Firoozeh and Awang Biak, Dayang Radiah and Mohd Salleh, Mohamad Amran (2012) Fluidized bed chemical vapor deposition synthesis of carbon nanotubes using different Fe-Co/Alumina catalytic powders. Fullerenes, Nanotubes and Carbon Nanostructures, 20 (3). pp. 266-282. ISSN 1536-383X; ESSN: 1536-4046

Ahsan, Amimul and Rahman, Mohammad Mahmudur and Oztop, Hakan F. and Abd Rahim, Nasrudin and Rahman, Saidur and Al-Salem, Khaled and Amin, N. and Mamun, Mohammad Arif Hasan (2012) Computational analysis of mixed convection in a channel with a cavity heated from different sides. International Communications in Heat and Mass Transfer, 39 (1). pp. 78-84. ISSN 0735-1933

Al-Obaidi, Mohammed Mahmoud Ahmad and Ali, Salmiaton and Wan Ab. Karim Ghani, Wan Azlina and Mohd Salleh, Mohamad Amran and Omar, Rozita and Yap, Taufiq Yun Hin and Ahmadun, Fakhru'l-Razi (2012) Catalytic gasification of empty fruit bunch for enhanced production of hydrogen rich fuel gas. Pertanika Journal of Science & Technology, 20 (1). pp. 139-149. ISSN 0128-7680; ESSN: 2231-8526

Althuwaynee, Omar F. and Pradhan, Biswajeet and Lee, Saro (2012) Application of an evidential belief function model in landslide susceptibility mapping. Computers & Geosciences, 44. pp. 120-135. ISSN 0098-3004; ESSN: 1873-7803

Arasteh Rad, Habibollah and Samsudin, Khairulmizam and Ramli, Abdul Rahman and Tavallaie, Mohammad Ali (2012) Performance evaluation of a mobile road traffic infraction registration system through benchmark. Pertanika Journal of Science & Technology, 20 (1). pp. 63-80. ISSN 0128-7680; ESSN: 2231-8526

Azmi, N. A. and Md. Yunos, Khairul Faezah and Zakaria, R. (2012) Application of sandwich membrane for the treatment of palm oil mill effluent (POME) for water reuse. Procedia Engineering, 44. pp. 1980-1981. ISSN 1877-7058

Ban, Ying Siang and Varatharajoo, Renuganth (2012) Optimal control for combined energy storage and attitude control system (CEACS) in small satellites. Applied Mechanics and Materials, 110-116. pp. 3587-3592. ISSN 1660-9336; ESSN: 1662-7482

Bimakr, Mandana and Abdul Rahman, Russly and Taip, Farah Saleena and Mohd Adzahan, Noranizan and Sarker, Md. Zaidul Islam and Ganjloo, Ali (2012) Antioxidant activity of winter melon (Benincasa hispida) seeds using conventional soxhlet extraction technique. International Food Research Journal, 19 (1). pp. 229-234. ISSN 1985-4668; ESSN: 2231-7546

Bimakr, Mandana and Abdul Rahman, Russly and Taip, Farah Saleena and Mohd Adzahan, Noranizan and Sarker, Md. Zaidul Islam and Ganjloo, Ali (2012) Optimization of ultrasound-assisted extraction of crude oil from winter melon (Benincasa hispida) seed using response surface methodology and evaluation of its antioxidant activity, total phenolic content and fatty acid composition. Molecules, 17 (10). pp. 11748-11762. ISSN 1420-3049

C., L. Too and Yusof, Yus Aniza and Chin, Nyuk Ling and A. Talib, Rosnita and Aziz, Mohammad Gulzarul (2012) Size reduction of selected spices using knife mill: Experimental investigation and model fitting. Journal of Food, Agriculture and Environment, 10 (1). pp. 102-106. ISSN 1459-0255

Che Dom, Nazri and Abd Latif, Zulkiflee and Ahmad, Abu Hassan and Ismail, Rodziah and Pradhan, Biswajeet (2012) Manifestation of GIS tools for spatial pattern distribution analysis of dengue fever epidemic in the city of Subang Jaya, Malaysia. EnvironmentAsia, 5 (2). pp. 82-92. ISSN 2586-8861

Chia, Suet Lin and Shamsudin, Rosnah and Mohd Adzahan, Noranizan and Wan Daud, Wan Ramli (2012) The effect of storage on the quality attributes of ultraviolet-irradiated and thermally pasteurised pineapple juices. International Food Research Journal, 19 (3). pp. 1001-1010. ISSN 1985-4668; ESSN: 2231-7546

Darmawan, Rosli and Adam, Nor Mariah (2012) Development of 3D CFD simulation method in nuclear reactor safety analysis. Jurnal Sains Nuklear Malaysia, 24 (2). pp. 19-27. ISSN 2232-0946

Edith, Odeigah and Janius, Rimfiel B. and Yunus, Robiah (2012) Factors affecting the cold flow behaviour of biodiesel and methods for improvement – a review. Pertanika Journal of Science & Technology, 20 (1). pp. 1-14. ISSN 0128-7680; ESSN: 2231-8526

Eliaderany, Mehrdad Nikbakht and Zulkifli, Norzima and Ismail, Napsiah and Sulaiman, Shamsuddin and Sadrnia, Abdolhossein and Suleiman, Mohamed (2012) Multi-echelon supply chain design in natural gas industry. World Applied Sciences Journal, 20 (1). pp. 54-63. ISSN 1818-4952; ESSN: 1991-6426

Endan, Johari and Ahmad, Desa and Taip, Farah Saleena and Keshvadi, Afshin and Harun, Ifaniff (2012) The reflection of moisture content on palm oil development during the ripening process of fresh fruits. Journal of Food, Agriculture and Environment, 10 (1). pp. 203-209. ISSN 1459-0255; ESSN: 1459-0263

Farzadnia, Nima and Abang Ali, Abang Abdullah and Demirboga, Ramazan (2012) Development of nanotechnology in high performance concrete. Advanced Materials Research, 364. pp. 115-118. ISSN 1022-6680; ESSN: 1662-8985

Hameed Sultan, Mohamed Thariq and Basri, Shahnor and Mohd Rafie, Azmin Shakrine and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Mohd Ajir, Mohd Ramly (2012) High velocity impact damage analysis for glass epoxy - laminated plates. Advanced Materials Research, 399-401. pp. 2318-2328. ISSN 1022-6680; ESSN: 1662-8985

Haron, Md Jelas and Jahangirian, Hossein and Silong, Sidik and Yusof, Nor Azah and Kassim, Anuar and Rafiee-Maghaddam, Roshanak and Mahdavi, Behnam and Peyda, Mazyar and Abdollahi, Yadollah and Amin, Jamileh (2012) Benzyl and methyl fatty hydroxamic acids based on palm kernel oil as chelating agent for liquid-liquid iron(III) extraction. International Journal of Molecular Sciences, 13 (2). pp. 2148-2159. ISSN 1422-0067

Haron, Md. Jelas and Jahangirian, Hossein and Silong, Sidik and Yusof, Nor Azah and Kassim, Anuar and Moghaddam, Roshanak Rafiee and Peyda, Mazyar and Abdollahi, Yadollah and Amin, Jamileh and Gharayebi, Yadollah (2012) Copper extraction by fatty hydroxamic acids derivatives synthesized based on palm kernel oil. Journal of Oleo Science, 61 (4). pp. 189-195. ISSN 1345-8957; ESSN: 1347-3352

Hassan, Mohd Khair and Mohd Azubir, Nor Aziah and H. M. I., Nizam and Toha, Siti Fauziah and Ksm Kader Ibrahim, Babul Salam (2012) Optimal design of Electric Power Assisted Steering system (EPAS) using GA-PID method. Procedia Engineering, 41. pp. 614-621. ISSN 1877-7058

Hitam, Salasiah and Suhaimi, Siti Norziela and Muhammad Noor, Ahmad Shukri and Ahmad Anas, Siti Barirah and Sahbudin, Ratna Kalos Zakiah (2012) Performance analysis on 16-channels wavelength division multiplexing in free space optical transmission under tropical regions environment. Journal of Computer Science, 8 (1). pp. 145-148. ISSN 1549-3636; ESSN: 1552-6607

Hizam, Hashim and Aris, Ishak and Ab Kadir, Mohd Zainal Abidin and Akorede, Mudathir Funsho and Buba, Sani Dahiru (2012) Mitigating the anthropogenic global warming in the electric power industry. Renewable and Sustainable Energy Reviews, 16 (1). pp. 2747-2761. ISSN 1364-0321

Hojabri, Mojgan and Soheilirad, Mohammadsoroush and Hedayati, Mahdi (2012) Available transfer capability and least square method. Scientific Research and Essays, 7 (18). art. no. 6458AD731377. pp. 1777-1785. ISSN 1992-2248

Hussain, Siti Aslina and Tan, Hong Tat and Abdul Hamid, Mohd Ismail and Abdullah, Norhafizah and Idris, Azni (2012) Pressure reduction on blood flow in aorta coronary sinus conduit. Pertanika Journal of Science & Technology, 20 (2). pp. 347-353. ISSN 0128-7680; ESSN: 2231-8526

Ibrahim, Fatimah and Ahmad, Siti Anom and Park, Jong Woo and Wan Abas, Wan Abu Bakar (2012) Biomechanical response of the upper body during prostration in salat and the child's pose: a preliminary study. Journal of Physical Therapy Science, 24 (10). pp. 1021-1024. ISSN 0915-5287; ESSN: 2187-5626

Ibrahim, Mohd Shukri and Salit, Mohd Sapuan and Abdul Aziz, Faieza (2012) Mechanical and thermal properties of composites from unsaturated polyester filled with oil palm ash. Journal of Mechanical Engineering and Sciences, 2. pp. 133-147. ISSN 2289-4659; ESSN: 2231-8380

Ismail, Luthffi Idzhar and Shamsudin, Syamimi and Yussof, Hanafiah and Hanapiah, Fazah Akhtar and Zahari, Nur Ismarrubie (2012) Estimation of concentration by eye contact measurement in robot-based intervention program with autistic children. Procedia Engineering, 41. pp. 1548-1552. ISSN 1877-7058

Ismail, Luthffi Idzhar and Shamsudin, Syamimi and Yussof, Hanafiah and Hanapiah, Fazah Akhtar and Zahari, Nur Ismarrubie (2012) Robot-based intervention program for autistic children with humanoid robot NAO: initial response in stereotyped behavior. Procedia Engineering, 41. pp. 1441-1447. ISSN 1877-7058

Ismail, Mohd Halim Shah and Abdullah, Luqman Chuah and Yunus, Robiah and Jusoh, Emiliana Rose and Wan Abdul Rahman, Wan Aizan (2012) Crude Palm Oil As A Bioadditive In Polypropylene Blown Films. BioResources, 7 (1). pp. 859-867. ISSN 1930-2126

Ismail, Mohd Idris Shah and Taha, Zahari and Abdul Shukor, Mohd Hamdi (2012) Experimental design and performance analysis in plasma arc surface hardening. Jurnal Teknologi, 57. pp. 57-75. ISSN 0127–9696; ESSN: 2180–3722

J., Sahari and Salit, Mohd Sapuan and Z.N., Ismarrubie and Abdul Rahman, M.Z. (2012) Physical and chemical properties of different morphological parts of sugar palm fibres. Fibres and Textiles in Eastern Europe, 19 (2). pp. 21-24. ISSN 1230-3666

Jahromi, Seyed Mojtaba Zabihinpour and Saghaei, Abbas and Mohd Ariffin, Mohd Khairol Anuar (2012) A review on fuzzy control charts for monitoring attribute data. Applied Mechanics and Materials, 159. pp. 23-28. ISSN 1660-9336; ESSN: 1662-7482

Jalaluddin, Mai Nursherida and Abdul Aziz, Nuraini and Sahari, Barkawi and Ali, Aidy and Abdul Aziz, Faieza and Tuan Ismail, Tuan Hafandi and Azizi, Azim and Mohd Salleh, Salwani and M. S., Nabilah and S. S., Aini and M., Shahril and M. H., Norhidayah (2012) Determination of leg injury criteria subjected to frontal impacts. Applied Mechanics and Materials, 165. pp. 265-269. ISSN 1660-9336; ESSN: 1662-7482

James Jayaselan, Helena Anusia and Wan Ismail, Wan Ishak and Ahmad, Desa (2012) Manipulator automation for fresh fruit bunch (FFB) harvester. International Journal of Agricultural and Biological Engineering, 5 (1). pp. 7-12. ISSN 1934-6344; ESSN: 1934-6352

Kamal, Md. Rowshon and Mohd Soom, Mohd Amin and Mohamed Shariff, Abdul Rashid (2012) Geospatial Water Productivity Index (WPI) for rice. Pertanika Journal of Science & Technology, 20 (2). pp. 381-399. ISSN 0128-7680; ESSN: 2231-8526

Kamal Bahrin, Ezyana and Samsu Baharuddin, Azhari and Ibrahim, Muhammad Faizal and Abdul Razak, Muhammad Nafis and Sulaiman, Alawi and Abd. Aziz, Suraini and Hassan, Mohd Ali and Shirai, Yoshihito and Nishida, Haruo (2012) Physicochemical property changes and enzymatic hydrolysis enhancement of oil palm empty fruit bunches treated with superheated steam. BioResources, 7 (2). pp. 1784-1801. ISSN 1930-2126

Karimi, Abbas and Zarafshan, Faraneh and Jantan, Adznan and Ramli, Abdul Rahman and Saripan, M. Iqbal and Syed Mohamed, Syed Abdul Rahman Al-Haddad (2012) Exact parallel plurality voting algorithm for totally ordered object space fault-tolerant systems. Pertanika Journal of Science & Technology, 20 (1). pp. 89-96. ISSN 0128-7680; ESSN: 2231-8526

Keshani, Samaneh and Abdullah, Luqman Chuah and Abdul Rahman, Russly (2012) Effect of temperature and concentration on rheological properties pomelo juice concentrates. International Food Research Journal, 19 (2). pp. 553-562. ISSN 1985-4668; ESSN: 2231-7546

Khan, Moonis Ali and Ngabura, Mohammed and Choong, Thomas Shean Yaw and Masood, Hassan and Abdullah, Luqman Chuah (2012) Biosorption and desorption of nickel on oil cake: batch and column studies. Bioresource Technology, 103 (1). pp. 35-42. ISSN 0960-8524; ESSN: 1873-2976

Kim Huat, Bujang and Keykya, Hamed A. and Asadi, Afshin and Kawasaki, Satoru (2012) Electro-Biogrouting and Its Challenges. International Journal of Electrochemical Science, 7 (2012). pp. 1196-1204. ISSN 1452-3981

Ksm Kader Ibrahim, Babul Salam and Mohd Azubir, Nor Aziah and Ahmad, Salmiah and Akmeliawati, Rini and H. M. I., Nizam and Abdul Muthalif, Asan Ghani and Toha, Siti Fauziah and Hassan, Mohd Khair (2012) Fuzzy-based temperature and humidity control for HVAC of electric vehicle. Procedia Engineering, 41. pp. 904-910. ISSN 1877-7058

Lew, Yoke Lian and Hassim, S. and Muniandy, R. and Law, Teik Hua (2012) Review of subcontracting practice in construction industry. International Journal of Engineering and Technology, 4 (4). pp. 442-445. ISSN 1793-8236

Lombigit, Lojius and Hamidon, Mohd Nizar and Khalid, Mohd Ashhar and Sulaiman, Nasri (2012) Low Cost front-end readout electronic for instrumentation used in Neutron experiments. International Journal of the Physical Sciences, 7 (20). art. no. 141EF9019091. pp. 2812-2817. ISSN 1992-1950

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Ali, Aidy and Ahmad, Desa (2012) Effect of the strengthened ribs in hybrid toughned kenaf/glass epoxy composites bumper beam. Life Science Journal, 9 (1). pp. 210-213. ISSN 1097-8135; ESSN: 2372-613X

Mansor, Shattri and Mahmud, Ahmad Rodzi and Billa, Lawal (2012) Mesoscale grid rainfall estimation from AVHRR and GMS data. International Journal of Remote Sensing, 33 (9). pp. 2892-2908. ISSN 0143-1161

Mansor, Shattri and Mahmud, Ahmad Rodzi and Kim Huat, Bujang and Elmahdy, Samy Ismail (2012) Application of terrain analysis to the mapping and spatial pattern analysis of subsurface geological fractures of Kuala Lumpur limestone bedrock, Malaysia. International Journal of Remote Sensing, 33 (10). pp. 3176-3196. ISSN 0143-1161

Marjani, Mohammad Ebrahim and Soh, Kim Geok and Majid, Mojahed and Omar Fauzee, Mohd Suffian and Abdullah, Nur Surayyah Madhubala and Abu Bakar, Mohd Rizam (2012) Usage of group AHP approach in karate agility test selection. Pertanika Journal of Social Sciences & Humanities, 20 (spec. Dec.). pp. 129-142. ISSN 0128-7702; ESSN: 2231-8534

Marzook, Ali Kamil and A., Ismail and Mohd Ali, Borhanuddin and Sali, Aduwati and Khatun, Sabira (2012) An efficient algorithm for improving precision of multi-cell channel estimation systems. Procedia Engineering, 41. pp. 367-376. ISSN 1877-7058

Masoudi, Mehran and Hashim, Mansor and Mohamed Kamari, Halimah and Salit, Mohd Sapuan (2012) Co-electrodeposition synthesis and characterization of Ni-Al2O3-Cr hybrid nanocomposite. Elixir Applied Chemistry, 44. pp. 7386-7390. ISSN 2229 -712X

Mat Jusoh, Suriani and Ali, Aidy and Abdan, Khalina and Salit, Mohd Sapuan and Abdullah, Shahrir and Haftirman, (2012) Detection of defects in natural composite materials using a thermal imaging technique. Materials Testing, 54 (5). pp. 340-346. ISSN 0025-5300

Mazloomi, Kaveh and Gomes, Chandima (2012) Hydrogen as an energy carrier: prospects and challenges. Renewable and Sustainable Energy Reviews, 16 (5). pp. 3024-3033. ISSN 1364-0321; ESSN: 1879-0690

Md Salleh, Liza and Abdul Rahman, Russly and Bimakr, Mandana and Selamat, Jinap and Rahmat, Asmah and Sarker, Md. Zaidul Islam and Abdul Hamid, Azizah (2012) Supercritical fluid extraction of bioactive flavonoid from Strobilanthes crispus (pecah kaca) and its comparison with solvent extraction. International Food Research Journal, 19 (2). pp. 503-508. ISSN 1985-4668; ESSN: 2231-7546

Memarian, Hadi and Balasundram, Siva K. and Talib, Jamal and Teh, Christopher Boon Sung and Mohd Sood, Alias and Abbaspour, Karim C. and Haghizadeh, Ali (2012) Hydrologic analysis of a tropical watershed using KINEROS2. EnvironmentAsia, 5 (1). pp. 84-93. ISSN 1906-1714

Moayedi, Hossein and Kim Huat, Bujang and Kazemian, Sina and Mohammad, Thamer Ahmad (2012) Effect of stabilizer reagents on zeta potential of kaolinite and its relevance to electrokinetic treatment. Journal of Dispersion Science and Technology, 33 (1). pp. 103-110. ISSN 0193-2691; ESSN: 1532-2351

Mohamed, Al Mabruk S. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Hamouda, Abdel Magid Salem and Baharudin, B. T. Hang Tuah (2012) Modeling the technology transfer process in the petroleum industry: evidence from Libya. Mathematical and Computer Modelling, 55 (3-4). pp. 451-570. ISSN 0895-7177; ESSN: 1872-9479

Mohamed Amin Tawakkal, Intan Syafinaz and A. Talib, Rosnita and Abdan, Khalina and Chin, Nyuk Ling (2012) Mechanical and physical properties of kenaf-derived cellulose (KDC)-filled polylactic acid (PLA) composites. BioResources, 7 (2). pp. 1643-1655. ISSN 1930-2126

Mohammad Yusoff, Wardah Fatimah and Salleh, Elias and Adam, Nor Mariah and Sapian, Abdul Razak and Hamzah, Zabidi (2012) Investigation of potential solar induced ventilation strategy in hot and humid climate. ALAM CIPTA, International Journal on Sustainable Tropical Design Research & Practice, 5 (1). pp. 43-54. ISSN 1823-7231; ESSN: 2289-3687

Mohammadi, Ahmad and Ismail, Alyani and Mahdi, Mohd Adzir and Raja Abdullah, Raja Syamsul Azmir and Mohd Isa, Maryam and Sadrolhosseini, Amir Reza (2012) Carbon-nanotube-based FR-4 patch antenna as a bio-material sensor. Procedia Engineering, 41. pp. 724-728. ISSN 1877-7058

Mohd Ali, Ahmad Amiruddin and Mohd Zainudin, Mohd Huzairi and Idris, Azni and Samsu Baharuddin, Azhari and Sulaiman, Alawi and Matsui, Toru and Osaka, Noriko and Oshibe, Hiroshi and Hassan, Mohd Ali and Shirai, Yoshihito (2012) Enhanced biogas production from palm oil mill effluent supplemented with untreated oil palm empty fruit bunch biomass with a change in the microbial community. Japan Journal of Food Engineering, 13 (3). pp. 37-41. ISSN 1345-7942; ESSN: 1884-5924

Mohd Ariffin, Mohd Khairol Anuar and Fathi, Masood and Ismail, Napsiah (2012) A new heuristic method to solve straight assembly line balancing problem. Pertanika Journal of Science & Technology, 20 (2). pp. 355-369. ISSN 0128-7680; ESSN: 2231-8526

Mohd Johar, Noor Azman and Hassan, Mohd Ali and Zakaria @ Mamat, Mohd Rafein and Phang, Lai Yee and Shirai, Yoshihito and Ariffin, Hidayah (2012) Evaluation of factors affecting polyhydroxyalkanoates production by Comamonas sp. EB172 using central composite design. Malaysian Journal of Microbiology, 8 (3). pp. 184-190. ISSN 1823-8262; ESSN: 2231-7538

Mousavi, Maryam and Abdul Aziz, Faieza and Ismail, Napsiah (2012) Virtual reality adoption capability in Malaysian automotive manufacturing industry. Scientific Research and Essays, 7 (2). art. no. D227C6C27330. pp. 158-164. ISSN 1992-2248

Naidir, Ferra and Yunus, Robiah and Mohd. Ghazi, Tinia Idaty and Ramli, Irmawati (2012) Synthesis of epoxidized palm oil-based trimethylolpropane ester by in situ epoxidation method. Pertanika Journal of Science & Technology, 20 (2). pp. 331-337. ISSN 0128-7680; ESSN: 2231-8526

Nazeri, Mona and Jusoff, Kamaruzaman and Madani, Nima and Mahmud, Ahmad Rodzi and Bahman, Abdul Rani and Kumar, Lalit (2012) Predictive modeling and mapping of Malayan sun bear (Helarctos malayanus) distribution using maximum entropy. PLOS ONE, 7 (10). art. no. e48104. pp. 1-9. ISSN 1932-6203

Ng, Khai Mun and Adam, Nor Mariah and Zakaria, Azmi (2012) Numerical simulation on the reflection characterisation and performance of a solar collector - a case study of UPM solar bowl. Pertanika Journal of Science & Technology, 20 (2). pp. 283-298. ISSN 0128-7680; ESSN: 2231-8526

Nik Daud, Nik Norsyahariati and Aziz, Ruslina (2012) Landfill site work performance based on residents perceptions of environmental impacts: case study in Malaysia. Advanced Materials Research, 356-360. pp. 2036-2041. ISSN 1022-6680; ESSN: 1662-8985

Noroziroshan, Alireza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Mustapha, Faizal (2012) A hybrid GA-SA algorithm for multi-objective sequencing problem in high-product mix shop-floor. Applied Mechanics and Materials, 110-116. pp. 3964-3971. ISSN 1660-9336; ESSN: 1662-7482

Okhovat, Mohammad Amin and Nehzati, Taravatsadat and Pouriran, Amin and Fakhar, Shahriar and Mohd Ariffin, Mohd Khairol Anuar (2012) Improving equipment effectiveness by designing optimal production process. Advanced Materials Research, 383-390. pp. 6363-6369. ISSN 1022-6680; ESSN: 1662-8985

Omar, Husaini and Kim Huat, Bujang and Md Yusoff, Zainuddin and Safaei, Mehrdad (2012) Relationship between Lithology Factor and Landslide Occurrence based on Information Value (IV) and Frequency Ratio (FR) Approaches- Case Study in North of Iran. Electronic Journal of Geotechnical Engineering, 17 (A). pp. 79-90. ISSN 1089-3032

Ong, C. A. and Abdul Aziz, Norashikin and Taip, Farah Saleena and Ibrahim, Mohd Nordin (2012) Ex-situ experimental set-up for pink guava juice fouling deposit study. Pertanika Journal of Science & Technology, 20 (1). pp. 109-119. ISSN 0128-7680; ESSN: 2231-8526

Ou, Jian Zhen and Yaacob, Mohd. Hanif and Campbell, Jos Laurie and Breedon, Michael and Kalantar-zadeh, Kourosh and Wlodarski, Wojtek (2012) H2 sensing performance of optical fiber coated with nano-platelet WO3 film. Sensors and Actuators B: Chemical, 166-167. pp. 1-6. ISSN 0925-4005

Piltan, Farzin and Sulaiman, Nasri (2012) Review of sliding mode control of robotic manipulator. World Applied Sciences Journal, 18 (12). pp. 1855-1869. ISSN 1818-4952; ESSN: 1991-6426

Pourghasemi, Hamid Reza and Pradhan, Biswajeet and Gokceoglu, Candan (2012) Application of fuzzy logic and analytical hierarchy process (AHP) to landslide susceptibility mapping at Haraz watershed, Iran. Natural Hazards, 63 (2). pp. 965-996. ISSN 0921-030X; ESSN: 1573-0840

Prasad, Arun and Kazemian, Sina and Kalantari, Behzad and Kim Huat, Bujang (2012) A behavior of reinforced vibrocompacted stone column in peat. Pertanika Journal of Science & Technology, 20 (2). pp. 221-241. ISSN 0128-7680; ESSN: 2231-8526

Ramli, Abdul Rahman and Mahmud, Rozi and Mashohor, Syamsiah and Mharib, Ahmed M. (2012) Survey on liver CT image segmentation methods. Artificial Intelligence Review, 37 (2). pp. 83-95. ISSN 0269-2821

Rashid, Helmi and Mohd Ariffin, Mohd Khairol Anuar and Mohd Noh, Mohd Hafiz and Abdullah, Abdul Halim and Abdul Hamid, Ahmad Hussein and Mat Jusoh, Mohammad Azzeim and Othman, Akbar (2012) Design review of scissors lifts structure for commercial aircraft ground support equipment using finite element analysis. Procedia Engineering, 41. pp. 1696-1701. ISSN 1877-7058

Rashid, Umer and Ibrahim, M. and Ali, S. and Adil, M. and Hina, Saira and Bukhari, Iftikhar Hussain and Yunus, Robiah (2012) Comparative study of the methanolysis and ethanolysis of maize oils using alkaline catalysts. Grasas y Aceites, 63 (1). pp. 35-43. ISSN 0017-3495; ESSN: 1988-4214

Razali, Mohd Hudzari and Salit, Mohd Sapuan and M. Abd Halim, Abdul Ssomad and Mohd Noor, Noordin Asimi and Muhammad, Hasbullah and Roslan, Syazili (2012) Simulation and analysis of innovative hand tool harvester. Scientific Research and Essays, 7 (19). art. no. 12E77C031912. pp. 1864-1871. ISSN 1992-2248

Romli, Fairuz Izzuddin and Cheang, Kian Hou and Chew, Junxian (2012) CROPS - a decision-making aid tool for product redesign. Applied Mechanics and Materials, 110-116. pp. 5136-5140. ISSN 1660-9336; ESSN: 1662-7482

Sahib, Mouayad A. and Raja Ahmad, Raja Mohd Kamil and Marhaban, Mohammad Hamiruce (2012) Nonlinear FXLMS algorithm for active noise control systems with saturation nonlinearity. IEEJ Transactions on Electrical and Electronic Engineering, 7 (6). pp. 598-606. ISSN 1931-4973; ESSN: 1931-4981

Saleh, Ahmed Mohammed Shamsan and Mohd Ali, Borhanuddin and A. Rasid, Mohd Fadlee and Ismail, Alyani (2012) A self-optimizing scheme for energy balanced routing in wireless sensor networks using SensorAnt. Sensors, 12 (8). pp. 11307-11333. ISSN 1424-8220

Salit, Mohd Sapuan and Abdul Aziz, Nuraini and Abdullah, A. B. and Samad, Z. and Khaleed, H. M. T. (2012) An investigation of geometrical defect of cold embossing part utilizing FEM and image processing technique. Indian Journal of Engineering and Materials Sciences, 19 (1). pp. 41-46. ISSN 0971-4588

Salit, Mohd Sapuan and Abdul Aziz, Nuraini and Abdullah, Ahmad Baharuddin and Samad, Zahurin and M.Tandur, Khaleed Hussain (2012) Effects of die shape modifications on the geometrical and dimensional accuracies of cold forged AUV propeller blade. International Journal of Physical Sciences, 7 (19). art. no. BC248D418917. pp. 2745-2754. ISSN 1992-1950

Salit, Mohd Sapuan and Abral, Hairul and Gafar, M. Fitra and Andriyanto, Heri and Ishak, Mohamad Ridzwan and Evitayani, and Ilhamdi, (2012) Alkali treatment of screw pine (pandanus odoratissimus) fibres and its effect on unsaturated polyester composite. Polymer-Plastics Technology and Engineering, 51 (1). pp. 12-18. ISSN 0360-2559

Salit, Mohd Sapuan and Abrar, Hairul and Andriyanto, Heri and Samera, Rendi and Ishak, Mohamad Ridzwan (2012) Mechanical Properties of Screw Pine (Pandanus Odoratissimus) Fibers-Unsaturated Polyester Composites. Polymer-Plastics Technology and Engineering, 51 (5). pp. 500-506. ISSN 0360-2559

Salit, Mohd Sapuan and Ali, Aidy and Ahmad, Desa and Abdan, Khalina and Makinejad, Majid Davoodi and Jonoobi, Mehdi (2012) Effect of polybutylene terephthalate (PBT) on impact property improvement of hybrid kenaf/glass epoxy composite. Materials Letters, 67 (1). pp. 5-7. ISSN 0167-577X

Salit, Mohd Sapuan and Ali, Aidy and Makinejad, Majid Davoodi and Abu Osman, Noor Azuan and Oshkour, Azim Ataollahi and Wan Abas, Wan Abu Bakar (2012) Development process of new bumper beam for passenger car: a review. Materials and Design, 40. pp. 304-313. ISSN 0261-3069

Salit, Mohd Sapuan and Ismail, Napsiah and Dharmalingam, Sivakumar and Ismail, M. Y. (2012) Application of total productive maintenance to reduce non-stick on pad problem in IC packaging. International Journal of Engineering and Science, 3 (1). pp. 14-33. ISSN 2086-3799

Salit, Mohd Sapuan and Japar, Sahari (2012) Natural fibre reinforced biodegradable polymer composites. Reviews on Advanced Materials Science, 30 (2). pp. 166-174. ISSN 1606-5131

Salit, Mohd Sapuan and Japar, Sahari (2012) The development and properties of biodegradable and sustainable polymers. Journal of Polymer Materials, 29 (1). pp. 153-165. ISSN 0973-8622

Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdan, Khalina and El-Shekeil, Yousuf Ali (2012) Influence of fiber content on the mechanical and thermal properties of kenaf fiber reinforced thermoplastic polyurethane composites. Materials and Design, 40. pp. 299-303. ISSN 0261-3069

Salit, Mohd Sapuan and Zainudin, Edi Syams and Japar, Sahari and Maleque, Md Abdul (2012) Sugar Palm Tree: A Versatile Plant and Novel Sourse for Biofibers, Biomatrices and Biocomposites. Polymers from Renewable Resources, 3 (2). pp. 33-50. ISSN 2041-2479

Salit, Mohd Sapuan and Zainudin, Edi Syams and Lazim, Yusriah and Jaafar @ Mustapha, Mariatti (2012) Review on underutilized Malaysian agro-wastes as reinforcements in polymer composites. Journal of Polymer Materials, 29 (2). pp. 21-36. ISSN 0973-8622

Samsu Baharuddin, Azhari and Md. Yunos, Khairul Faezah and Zakaria, Rabitah and Md Yunos, Noor Seribainun Hidayah and Nik Mahmud, Nik Anis (2012) Effect of high-pressure steam treatment on enzymatic saccharification of oil palm empty fruit bunches. BioResources, 7 (3). pp. 3525-3538. ISSN 1930-2126

Shamsuddin, Rosnah and Wong, W. K. and Muda, Noraziah and Hassan, Osman (2012) Chemical composition changes of two water apple (Syzygium samaragense). International Food Research Journal, 19 (1). pp. 167-174. ISSN 1985-4668; ESSN: 2231-7546

Shamsuddin, Syamimi and Yussof, Hanafiah and Ismail, Luthffi Idzhar and Mohamed, Salina and Hanapiah, Fazah Akhtar and Zahari, Nur Ismarrubie (2012) Humanoid robot NAO interacting with autistic children of moderately impaired intelligence to augment communication skills. Procedia Engineering, 41. pp. 1533-1538. ISSN 1877-7058

Shamsuddin, Syamimi and Yussof, Hanafiah and Ismail, Luthffi Idzhar and Mohamed, Salina and Hanapiah, Fazah Akhtar and Zaharid, Nur Ismarrubie (2012) Initial response in HRI - a case study on evaluation of child with autism spectrum disorders interacting with a humanoid robot NAO. Procedia Engineering, 41. pp. 1448-1455. ISSN 1877-7058

Shamsudin, Saleha and Md Shah, Umi Kalsom and Zainudin, Huzairi and Abd Aziz, Suraini and Mustapa Kamal, Siti Mazlina and Shirai, Yoshihito and Hassan, Mohd Ali (2012) Effect of steam pretreatment on oil palm empty fruit bunch for the production of sugars. Biomass and Bioenergy, 36. pp. 280-288. ISSN 0961-9534

Shokripour, Hamed and Wan Ismail, Wan Ishak and Shokripour, Ramin and Moezkarimi, Zahra (2012) Development of an automatic cutting system for harvesting oil palm fresh fruit bunch (FFB). African Journal of Agricultural Research, 7 (17). art. no. E73F15535402. pp. 2683-2688. ISSN 1991-637X

Siregar, Januar Parlaungan and Salit, Mohd Sapuan and Ab Rahman, Mohamad Zaki and Mohd Dahlan, Khairul Zaman (2012) Effects of alkali treatments on the tensile properties of pineapple leaf fibre reinforced high impact polystyrene composites. Pertanika Journal of Science & Technology, 20 (2). pp. 409-414. ISSN 0128-7680; ESSN: 2231-8526

Sobhi, Babak and Mohd Adzahan, Noranizan and Abdul Karim, Muhammad Shahrim and Abdul Rahman, Russly and Bakar, Jamilah and Ghazali, Zulkafli (2012) Microbial and quality attributes of thermally processed chili shrimp paste. International Food Research Journal, 19 (4). pp. 1705-1712. ISSN 1985-4668; ESSN: 2231-7546

Soltani, Nayereh and Saion, Elias and Hussein, Mohd Zobir and Bahrami, Afarin and Naghavi, Kazem and Yunus, Robiah (2012) Microwave irradiation effects on hydrothermal and polyol synthesis of ZnS nanoparticles. Chalcogenide Letters, 9 (6). pp. 265-274. ISSN 1584-8663

Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Badakshian, Mostafa (2012) Performance optimization of simultaneous machine and automated guided vehicle scheduling using fuzzy logic controller based genetic algorithm. International Journal of Physical Sciences, 7 (9). pp. 1461-1471. ISSN 1992-1950

Tan, Gim Heng and Mohd Sidek, Roslina and Ramiah, Harikrishnan and Chong, Wei Keat (2012) Design of ultra-low voltage 0.5V CMOS current bleeding mixer. IEICE Electronics Express, 9 (11). pp. 990-997. ISSN 1349-2543

Tan, Wen Siang and Tey, Beng Ti and Ho, Kok Lian and Lee, Khai Wooi (2012) Delivery of chimeric hepatitis B core particles into liver cells. Journal of Applied Microbiology, 112 (1). pp. 119-131. ISSN 1364-5072

Tang, Sai Hong and Khaksar, Weria and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar (2012) A review on robot motion planning approaches. Pertanika Journal of Science & Technology, 20 (1). pp. 15-29. ISSN 0128-7680; ESSN: 2231-8526

Tien Bui, Dieu and Pradhan, Biswajeet and Lofman, Owe and Revhaug, Inge (2012) Landslide susceptibility assessment in Vietnam using support vector machines, decision tree, and nave bayes models. Mathematical Problems in Engineering, 2012. art. no. 974638. pp. 1-26. ISSN 1024-123X; ESSN: 1563-5147

Tien Bui, Dieu and Pradhan, Biswajeet and Lofman, Owe and Revhaug, Inge and Dick, Oystein B. (2012) Spatial prediction of landslide hazards in Hoa Binh province (Vietnam): a comparative assessment of the efficacy of evidential belief functions and fuzzy logic models. Catena, 96. pp. 28-40. ISSN 0341-8162; ESSN: 1872-6887

Usman, Aliyu Danjuma and Wan Ahmad, Wan Fatinhamamah and Ab Kadir, Mohd Zainal Abidin and Mokhtar, Makhfudzah and Ariffin, Rusnani (2012) Effect of radiofrequency electromagnetic field exposure on hematological parameters of mice. World Applied Sciences Journal, 16 (5). pp. 656-664. ISSN 1818-4952; ESSN: 1991-6426

Vaithilingam, Chockalingam Aravind and Misron, Norhisam and Zare, Mohammad Reza and Aris, Ishak and Marhaban, Mohammad Hamiruce (2012) Computation of electromagnetic torque in a double rotor switched reluctance motor using flux tube methods. Energies, 5 (10). pp. 4008-4026. ISSN 1996-1073

Vishkaei, Mahta Sadegh and Yunus, Robiah and Mohd Salleh, Mohamad Amran and Ahmady, Afshin and Awang Biak, Dayang Radiah (2012) Innovative method to produce high-purity graphitic carbon nanospheres. Fullerenes, Nanotubes and Carbon Nanostructures, 20 (2). pp. 109-118. ISSN 1536-383X; ESSN: 1536-4046

Wan Mokhtar, Wan Mohd Fadli and Taip, Farah Saleena and Ab. Aziz, Norashikin and Mohd Noor, Samsul Bahari (2012) Process control of pink guava puree pasteurization process: simulation and validation by experiment. International Journal on Advanced Science, Engineering and Information Technology, 2 (4). pp. 31-34. ISSN 2088-5334

Yap, Wei Boon and Tey, Beng Ti and Mohammed Alitheen, Noorjahan Banu and Tan, Wen Siang (2012) Display of the antigenic region of Nipah virus nucleocapsid protein on hepatitis B virus capsid. Journal of Bioscience and Bioengineering, 113 (1). pp. 26-29. ISSN 1389-1723; ESSN: 1347-4421

Yee, Lian Ngit and Chuah, Jo Ann and Chong, Mei Ling and Phang, Lai Yee and Abdul Rahim, Raha and Sudesh, Kumar and Hassan, Mohd Ali (2012) Molecular characterisation of phaCAB from Comamonas sp. EB172 for functional expression in Escherichia coli JM109. Microbiological Research, 167 (9). pp. 550-557. ISSN 0944-5013; ESSN: 1618-0623

Yu, Gang Shee and Al-Mansoori, Mohammed Hayder and Yaakob, S. and Man, Azmi and Zamzuri, Abdul Kadir and Mahamd Adikan, Faisal Rafiq and Mahdi, Mohd Adzir (2012) Millimeter wave carrier generation based on a double-Brillouin-frequency spaced fiber laser. Optics Express, 20 (12). pp. 13402-13408. ISSN 1094-4087; ESSN:1094-4087

Yunus, Robiah and Mohd Ghazi, Tinia Idaty and Choong, Thomas Shean Yaw and Muhammad Syam, Azhari (2012) Synthesis of Jatropha curcas oil-based in a pulsed loop reactor. Industrial Crops and Products, 37 (1 / Ma). pp. 514-519. ISSN 0926-6690

Yunus, Robiah and Mohd Ghazi, Tinia Idaty and Muhammad Syam, Azhari and Choong, Thomas Shean Yaw (2012) Synthesis of Jatropha curcas-based methyl ester and ethyl ester as biodiesel feedstocks. Pertanika Journal of Science & Technology, 20 (1). pp. 165-173. ISSN 0128-7680; ESSN: 2231-8526

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2012) Optimization of cutting parameters on turning process based on surface roughness using response surface methodology. Applied Mechanics and Materials, 117-119. pp. 1561-1565. ISSN 1660-9336; ESSN: 1662-7482

Zahari, Nur Ismarrubie and Yussof, Hanafiah and Sugano, M. (2012) Fatigue damage mechanism of titanium in vacuum and in air. Procedia Engineering, 41. pp. 1559-1565. ISSN 1877-7058

Zahari, Rizal and Kamarulazizi, Sulaiman and Abang Abdul Majid, Dayang Laila (2012) Tensile behaviour of unbalanced woven C-glass/epoxy composite laminated plate with and without circular cutouts. Jurnal Mekanikal, 34. pp. 57-65. ISSN 2289-3866; ESSN: 2289-3873

Zahari, Rizal and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Mohd Rafie, Azmin Shakrine and Hameed Sultan, Mohamed Thariq (2012) Geometric non-linear analysis of composite laminated plates using higher order finite strip element. Applied Mechanics and Materials, 225. pp. 165-171. ISSN 1660-9336; ESSN: 1662-7482

Zainal Abidin, Ana Sakura and Muslimen, Rasli and Mohd Yusuff, Rosnah (2012) Determining and ranking of CSFs for design capabilities development in Malaysian automotive vendors. Advanced Materials Research, 433-440. pp. 2212-2218. ISSN 1022-6680; ESSN: 1662-8985

Zainudin, Edi Syams and Abdan, Khalina and Salit, Mohd Sapuan and Aji, Isuwa Suleiman and Mohd Dahlan, Khairul Zaman (2012) Study of Hybridized Kenaf/Palf- Reinforced Hdpe Composites by Dynamic Mechanical Analysis. Polymer-Plastics Technology and Engineering, 51 (21). pp. 146-153. ISSN 0360-2559

Book Section

Abdul Aziz, Faieza and Ahmad, Izham Hazizi and Zulkifli, Norzima and Mohd. Yusuff, Rosnah (2012) Particle reduction at metal deposition process in wafer fabrication. In: Manufacturing System. InTech, Rijeka, Croatia, pp. 1-26. ISBN 9789535105305

Abdul Aziz, Faieza and Tolouei, Saba (2012) Small block of supplier shares improve trust performance in supply chain relationship. In: Pathways to Supply Chain Excellence. InTech, Rijeka, Croatia, pp. 81-90. ISBN 9789535103677

Ahsan, Amimul and Imteaz, Monzur A. and Alam, Md. Zahangir and Haque, A. A. Mokammel and Ghazali, Abdul Halim (2012) Theoretical approach of condensation for solar still. In: Water Condensation : Processes, Modeling and Control. Nova Science Publishers, New York, pp. 137-158. ISBN 9781613248744; 1613248741

Amiri, Fazel and Mohamed Shariff, Abd Rashid and Tabatabaie, Taybeh (2012) Monitoring land suitability for mixed livestock grazing using Geographic Information System (GIS). In: Application of Geographic Information Systems. InTech, Croatia, pp. 241-255. ISBN 9789535108245

Aris, Ishak and Chong, K. H. and Bashi, S. M. (2012) Application of evolutionary algorithm in optimization digital structure design. In: Genetic Algorithms Theories and Applications. LAP LAMBERT Academic Publishing, Saarbruecken, Germany, pp. 123-130. ISBN 3848447088; 978-3848447084

Arunkumar, T. and Vinothkumar, K. and Ahsan, Amimul and Jayaprakash, R. and Kumar, Sanjay (2012) Experimental study on a compound parabolic concentrator tubular solar still tied with pyramid solar still. In: Advancing Desalination. InTech, Rijeka, Croatia, pp. 183-194. ISBN 9789535107040

Arvin, Farshad and C. Doraisamy, Shyamala and Samsudin, Khairulmizam and Ahmad, Faisul Arif and Ramli, Abdul Rahman (2012) Implementation of a cue-based aggregation with a swarm robotic system. In: Knowledge Technology. Communications in Computer and Information Science (295). Springer, Berlin, pp. 113-122. ISBN 9783642328251; EISBN: 9783642328268

Harun, Harlisya and Abd. Aziz, Sidek and Abd. Wahab, Zaidan (2012) Web 2.0 @ UPM. In: Web 2.0 @ IPTA Malaysia. Pusat Pembangunan Akademik, Universiti Kebangsaan Malaysia, Selangor, Malaysia, pp. 27-34. ISBN 9789833168217

Mohammady, Somayeh and Sulaiman, Nasri and M. Sidek, Roslina and Varahram, Pooria and Hamidon, Mohd. Nizar (2012) FPGA implementation of inverse fast fourier transform in orthogonal frequency division multiplexing systems. In: Fourier Transform - Signal Processing. InTech, Rijeka, Croatia, pp. 135-156. ISBN 9789535104537

Othman, Mohammad Lutfi and Aris, Ishak (2012) Inconsistent decision system : rough set data mining strategy to extract decision algorithm of a numerical distance relay - tutorial. In: Advances in Data Mining Knowledge Discovery and Applications. InTech, Rijeka, Croatia, pp. 117-142. ISBN 9789535107484

Sadrolhosseini, Amir Reza and Muhammad Noor, Ahmad Shukri and Abd. Moksin, Mohd Maarof (2012) Application of surface plasmon resonance based on a metal nanoparticle. In: Plasmonics - Principles and Applications. InTech, Rijeka, Croatia, pp. 253-282. ISBN 9789535107972

Salman, Mustafa Ismael and Ng, Chee Kyun and Noordin, Nor Kamariah (2012) Energy- and spectral-efficient wireless cellular networks. In: Green Communications and Networking. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 51 . Springer Berlin Heidelberg, Dordrecht, pp. 171-185. ISBN 9783642333675; EISBN: 9783642333682

Seyyedoshohadaei, Seyyed Masoud and Mohd Ali, Borhanuddin and Khatun, Sabira (2012) Inter-domain handover in WiMAX networks using optimized fast mobile IPv6. In: Advanced Transmission Techniques in WiMAX. InTech , Rijeka, Croatia, pp. 319-336. ISBN 9789533079653

Tang, Sai Hong and Nakhaeinia, Danial and Karasfi, Babak (2012) Application of fuzzy logic in mobile robot navigation. In: Fuzzy Logic - Controls, Concepts, Theories and Applications. InTech, Rijeka, Croatia, pp. 21-36. ISBN 9789535103967

Tanha, Maryam and Hashim, Fazirulhisyam (2012) Towards a secure and available smart grid using intrusion tolerance. In: Internet and Distributed Computing Systems. Lecture Notes in Computer Science (7646). Springer Berlin, Heidelberg, pp. 188-201. ISBN 9783642348822; EISBN: 9783642348839

Varahram, Pooria and Mohd Ali, Borhanuddin (2012) Peak-to-average power ratio reduction in orthogonal frequency division multiplexing systems. In: Advanced Transmission Techniques in WiMAX. InTech, Rijeka, Croatia, pp. 217-238. ISBN 9789533079653

Vasili, M. R. and Tang, Sai Hong and Vasili, Mehdi (2012) Automated storage and retrieval systems : a review on travel time models and control policies. In: Warehousing in the Global Supply Chain. Springer, London, pp. 159-209. ISBN 9781447122739; EISBN: 9781447122746

Conference or Workshop Item

Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Wan Ahmad, Wan Fatinhamamah (2012) Channel base current effects on the magnetic flux density waveshape associated with vertical lightning channel. In: Progress In Electromagnetics Research Symposium (PIERS), 27-30 Mar. 2012, Kuala Lumpur, Malaysia. (pp. 1787-1791).

Ab Kadir, Mohd Zainal Abidin and Misbah, Nor Ratna and Gomes, Chandima and Jasni, Jasronita and Wan Ahmad, Wan Fatinhamamah and Hassan, Mohd Khair (2012) Recent statistics on lightning fatalities in Malaysia. In: 31st International Conference on Lightning Protection (ICLP 2012), 2-7 Sept. 2012, Vienna, Austria. .

Abas, Ahmad Fauzi and Al-Qazwini, Yusser and Tamchek, Nizam and Mohd Noor, Ahmad Shukri and Onn, Baharil Izhan and M. Thirunavakkarasu, Punithavathi (2012) Fiber Bragg grating sensor for detecting ageing transformer oil. In: 3rd International Conference on Photonics (ICP), 1-3 Oct. 2012, Penang, Malaysia. (pp. 110-113).

Abbas, Alaa A. and Mansor, Shattri and Pradhan, Biswajeet and Tan, Chun Knee (2012) Spatial and seasonal variability of Chlorophyll-a and associated oceanographic events in Sabah water. In: 2nd International Workshop on Earth Observation and Remote Sensing Applications (EORSA 2012), 8-11 June 2012, Shanghai, China. (pp. 215-219).

Abd. Aziz, Farah Nora Aznieta (2012) Application of high performance precast steel fiber thin plate to strengthen reinforced concrete beam. In: The First Australasia and South-East Asia Structural Engineering and Construction Conference, 28 Nov.-2 Dec. 2012, Perth, Australia. (pp. 1-7).

Abdelsamie, Maher Abdelaleem Abdelrazik and Abdul Rahman, Russly and Mustafa, Shuhaimi and Hashim, Dzulkifly and Ab Rahman, Suhaimi (2012) Development of a new food preservation and packaging technique FPR liquid food products by using pyramid shape power. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 169-175).

Abdul Halif, Norzilah and Ahmadun, Fakhru'l-Razi and Choong, Thomas Shean Yaw and Abdullah, Luqman Chuah (2012) The effect of reactor temperature and hydrogen flow rate on carbon nanofibers (CNFs) characterizations and their adsorption capacity. In: 6th Pacific Basin Conference on Adsorption Science and Technology, 20-23 May 2012, Taipei, Taiwan. .

Abdul Karim, Hazerul and Mohamad, Hafizal and Ramli, Nordin and Sali, Aduwati (2012) Scalable video streaming over overlay/underlay cognitive radio network. In: 12th International Symposium on Communications and Information Technologies (ISCIT), 2-5 Oct. 2012, Gold Coast, Australia. (pp. 668-672).

Abdul Karim, Hezerul and Rossi, Farli and Mohd Arif, Nor Azhar and Sali, Aduwati and Komiya, Ryoichi (2012) Multiple description coding with side information for stereoscopic 3D. In: 1st IEEE International Symposium on Telecommunication Technologies (ISTT), 26-28 Nov. 2012, Kuala Lumpur, Malaysia. (pp. 245-248).

Abdul Karim Shah, Nor Nadiah and Abdul Rahman, Russly and Shamsuddin, Rosnah and Mohd Adzahan, Noranizan (2012) Effects of enzymatic clarification treatment on phenolic compounds of pummelo (Citrus grandis L. Osbeck) fruit juice. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 122-130).

Abdul Rahman, Ribhan Zafira and Shoumy, Nusrat Jahan (2012) Neural network controller for two-degree-freedom helicopter control system. In: 12th International Conference on Control, Automation and Systems (ICCAS), 17-21 Oct. 2012, ICC, Jeju Island, Korea. (pp. 101-106).

Abdul Shukor, Fairul Azhar and Misron, Norhisam and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Nirei, Masami (2012) Initial progress and possible improvement of e-cutter linear actuator development. In: 2012 IEEE International Conference on Power and Energy (PECon), 2-5 Dec. 2012, Kota Kinabalu, Sabah. (pp. 940-945).

Abdul Shukur, Fairul Azhar and Misron, Norhisam and Wakiwaka, Hiroyuki and Kunihisa, Tashiro and Nirei, Masami (2012) Evaluation of various permanent magnet arrangements on linear actuator. In: The 12 Asia Pacific Symposium on Applied Electromagnetics & Mechanics, 25-27 July 2012, Ho Chi Minh, Vietnam. (pp. 50-55).

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin and Abdul Aziz, Nuraini (2012) Roundness evaluation of cold forged pin head. In: 3rd International Conference on Engineering and ICT (iCEi 2012) , 4-5 Apr. 2012, Melaka, Malaysia. .

Abdullah, Azhar and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Abdul Hamid, Nor Haliza (2012) Mechanical moulding properties of tailing sand-clay mixture from Batu Gajah, Perak, Malaysia. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Abdullahi, Abubakar Sadiq and Ahmad, Desa and Amin, Sunusi Abubakar (2012) Rice residue management on Fadama lands and their effects on soil properties and crop development. In: USM-AUT International Conference (UAIC) 2012, 17-18 Nov. 2012, Bayview Beach Resort, Penang, Malaysia. (pp. 1-7).

Abdullahi, Abubakar Sadiq and Ahmad, Desa and Mohd Soom, Mohd Amin and Mohamed Shariff, Abdul Rashid (2012) Estimating evapotranspiration from paddy (Oryza sativa) field under humid tropical condition. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 131-140).

Abu Bakar, Nurhamimah and Mohamad, N. S. and Anuar, Mohd Shamsul and Mohd Tahir, Suraya (2012) Fundamentals compaction of bi-layered tablets. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 328-338).

Adeoye, Peter Aderemi and Che Man, Hasfalina and Mohd Soom, Mohd Amin and Mohamed, Thamer Ahmed and Akinbile, Christopher Oluwakunmi (2012) Poultry waste effects on shallow groundwater quality in selected farms in Minna, North-Central Nigeria. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 554-565).

Afshari, Ali Reza and Mohd Yusuff, Rosnah and Derayatifar, Amir Reza (2012) Project manager selection by using fuzzy simple additive weighting method. In: 2012 International Conference on Innovation, Management and Technology Research (ICIMTR2012), 21-22 May 2012, Melaka, Malaysia. (pp. 412-416).

Ahmad, Bilal A. and Mamdoohi, Ghazaleh and Abas, Ahmad Fauzi and Mokhtar, Makhfudzah and Mahdi, Mohd Adzir (2012) Effect of Erbium doped fiber location on double spacing multi-wavelength Brillouin-Erbium fiber laser performance. In: 3rd International Conference on Photonics (ICP), 1-3 Oct. 2012, Penang, Malaysia. (pp. 195-198).

Ahmad, Habib Imam and Suleiman, M. L. and Ahmad, Desa and Yusuf, D. D. (2012) Determination of wear elements in steyr ursus tractor lubricating oil using atomic absorption spectroscopy (AAS). In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 85-96).

Ahmad, M. Syahrir and Baharudin, B. T. Hang Tuah and Leman, Zulkiflle and Ismail, Napsiah and Sulaiman, Shamsuddin (2012) Thermal parameter affects on the part built using 3D printer Projet SD 3000. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Ahmad, Mohd Rozi and M. Yahya, Mohammad Harris and Hassan, Mohd Roshdi and Salleh, Jamil and Wan Ahmad, Wan Yunus and Hassim, Normala (2012) Some studies on shape memory alloy friction spun yarn. In: 2012 IEEE Business, Engineering and Industrial Applications Colloquium (BEIAC 2012), 7-8 Apr. 2012, Seri Pacific Hotel, Kuala Lumpur, Malaysia. (pp. 216-219).

Ahmad, Norhayati and Mohd Ilis, Nur and Mohd Saad, Wira Hidayat and Saripan, M. Iqbal and Masoumi, Hamid Reza Fard and Rokhani, Fakhrul Zaman and Marhaban, Mohammad Hamiruce (2012) Preliminary study of ultrasonic transducer characteristic on the breast surface. In: 2012 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES 2012), 17-19 Dec. 2012, Langkawi, Kedah, Malaysia. (pp. 544-548).

Ahmad, Salsabila and Shafie, Suhaidi and Ab Kadir, Mohd Zainal Abidin (2012) A high power generation, low power consumption solar tracker. In: 2012 IEEE International Conference on Power and Energy (PECon), 2-5 Dec. 2012, Kota Kinabalu, Sabah. (pp. 366-371).

Ahmad, Siti Anom and Khalid, Mohd Asyraf and Ishak, Asnor Juraiza and Md. Ali, Sawal Hamid (2012) Surface EMG classification for prosthesis control: fuzzy logic vs. artificial neural network. In: International Conference on Bio-inspired Systems and Signal Processing, 1-4 Feb. 2012, Algarve, Portugal. (pp. 317-320).

Al-Alimi, Abdulmoghni Ali Wazea and Abas, Ahmad Fauzi and Mahdi, Mohd Adzir and Al-Mansoori, Mohammed Hayder and Mokhtar, Makhfudzah (2012) Multiwavelength Brillouin erbium fiber laser in virtual linear cavity. In: 3rd International Conference on Photonics, 1-3 Oct. 2012, Penang, Malaysia. (pp. 175-178).

Ali, H. and Ahmad, Desa and Othman, Jamarei and Sulaiman, Shamsuddin (2012) Evaluation of disk plough combined with rotary blades on some soil physical properties. In: National Conference On Agricultural And Food Mechanization, 10-12 Jan. 2012, Kuching, Sarawak. .

Ali, Nur Atika and Khalid, Nurul Izzah and Ab. Aziz, Norashikin and Shamsudin, Rosnah and Taip, Farah Saleena (2012) Fouling deposit from chili sauce pasteurization unit. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 643-652).

Almshreqi, Ahmed M. Shamsan and Mohd Ali, Borhanuddin and A. Rasid, Mohd Fadlee and Ismail, Alyani and Varahram, Pooria (2012) An improved routing mechanism using bio-inspired for energy balancing in wireless sensor networks. In: International Conference on Information Networking 2012 (ICOIN 2012), 1-3 Feb. 2012, The Patra Bali Resort & Villas, Bali, Indonesia. (pp. 150-153).

Althuwaynee, Omar F. and Pradhan, Biswajeet and Mahmud, Ahmad Rodzi and Md Yusoff, Zainuddin (2012) Prediction of slope failures using bivariate statistical based index of entropy model. In: 2012 IEEE Colloquium on Humanities, Science & Engineering Research (CHUSER 2012), 3-4 Dec. 2012, Kota Kinabalu, Sabah. (pp. 362-367).

Asmat, Arnis and Mohamad Deros, Siti Noratiqah and Zainal Abiddin, Muhammad Zamzuri and Mansor, Shattri (2012) Wind direction extraction from synthetic aperture radar (SAR) using wavelet transform technique. In: 2012 IEEE Symposium on Computer Applications and Industrial Electronics (ISCAIE 2012), 3-4 Dec. 2012, The Magellan Sutera Resort, Kota Kinabalu, Sabah. (pp. 103-106).

Asr, Mina Habibi and Ibrahim, Mohd Nordin and Mokhtar, Mohd Noriznan and Md. Yunos, Khairul Faezah and Ibrahim, Nuzul Amri (2012) Selected properties of oil palm kernel. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 339-349).

Awang, Lokman and Salleh, Zulzamri and Mohd Yusop, Mohd Yuzri and Roslee, Ahmad Azmeer and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan (2012) Mechanical properties and microstructure of cocos nucifera (coconut) coir fibres. In: Asian International Conference on Materials, Minerals and Polymer (MAMIP 2012), 23-24 Mar. 2012, Vistana Hotel, Penang. .

Azmi, Nazatul Shima and Md. Yunos, Khairul Faezah (2012) Turbidity and suspended solid reduction from palm oil mill effluent using coconut shell charcoal. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 496-503).

Baharuddin, Akmal and Zakaria, Rabitah (2012) Parametric studies on in situ transesterification of palm fruit and waste mesocarp for biodiesel production. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 472-481).

Bibi Hanibah, Siti Sharifah and Bejo, Siti Khairunniza and Wan Ismail, Wan Ishak and Wayayok, Aimrun (2012) Feature extraction for head and broken rice detection using image processing technique. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 151-156).

Bimakr, Mandana and Abdul Rahman, Russly and Taip, Farah Saleena and Mohd Adzahan, Noranizan and Sarker, Md. Zaidul Islam and Ganjloo, Ali (2012) Comparison of different extraction methods for the extraction of total phenolic compounds from winter melon (Benincasa hispida) seeds. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 181-186).

Buba, Sani Dahiru and Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin (2012) Lightning accidents in Nigeria: with special attention to aviation mishaps. In: International Conference on Lightning Protection (ICLP), 2-7 Sept. 2012, Vienna, Austria. .

Che Man, Hasfalina and Abdullah, Luqman Chuah and Rahmati Zadeh, Maryam and Mohd Yusoff, Mohd Rashid (2012) Adsorption of Copper (II) from aqueous medium in fixed-bed column by kenaf fibres. In: 2nd International Conference on Chemistry and Chemical Process (ICCCP 2012), 5-6 May 2012, Hotel Concorde, Kuala Lumpur. (pp. 255-263).

Che Man, Hasfalina and Hamzah, Muhammad Hazwan and Jamaludin, Hishamuddin and Zainal Abidin, Zurina (2012) Preliminary study: kinetics of oil extraction from citronella grass by ohmic heated hydro distillation. In: 2nd International Conference on Chemistry and Chemical Process (ICCCP 2012), 5-6 May 2012, Hotel Concorde, Kuala Lumpur. (pp. 124-128).

Che Soh, Azura and Yeo, Lay Ting (2012) Intelligent fuzzy controller of twin-rotor MIMO system. In: International Conference on Electrical, Computer, Electronics and Communication Engineering (ICECECE 2012), 6-7 Dec. 2012, Penang, Malaysia. (pp. 17-22).

Che Ujang, Bukhari and Took, Clive Cheong and Mandic, Danilo P. (2012) On quaternion analyticity : enabling quaternion-valued nonlinear adaptive filtering. In: IEEE International Conference on Acoustics, Speech and Signal Processing , 25-31 Mar. 2012, Kyoto, Japan . (pp. 2117-2120).

Cheah, P. M. and Mohd Hanif, Ahmad Husni and Abd. Wahid, Samsuri and Abdullah, Luqman Chuah (2012) Transformation of pineapple stump into biochar under slow pyrolysis. In: Soil Science Conference of Malaysia 2012, 10-12 Apr. 2012, Kota Bharu, Kelantan. (pp. 18-21).

Cheok, Choon Yoong and Chin, Nyuk Ling and Yusof, Yus Aniza and A. Talib, Rosnita and Law, Chung Lim (2012) Total monomeric anthocyanin (TMA) extraction from mangosteen hull in ultrasonic assisted acidified aqueous solvent extractions. In: 8th International Symposium on Cavitation (CAV 2012), 13-16 Aug. 2012, Singapore. (pp. 619-622).

Cheong, X.H. and Mohd Rafie, Azmin Shakrine and Romli , Fairuz Izzuddin and Hameed Sultan, Mohamed Thariq and Yidris, Noorfaizal (2012) A study on the effect of upstream square blockage of a rotating cylinder. In: AEROTECH IV, 21-22 Nov. 2012, Kuala Lumpur. (pp. 13-17).

Chih, Fang Lee and Ahmad, Kamarul Arifin and Ismail, Rushdan and Abdul Hamid, Suzina (2012) Mucous layer effects towards nasal airflow. In: International Conference on Biomedical Engineering, ICoBE 2012 , 27-28 Feb. 2012, Penang, Malaysia. (pp. 276-279).

Chin @ Hashim, Nur Fizura and Abd Aziz, Samsuzana and Saringat, Hafizan (2012) Relationship between capacitance values and diesel contamination levels in crude palm oil. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 219-224).

Chong, Jin Hui and Ng, Chee Kyun and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin (2012) Dynamic transmit antenna shuffling scheme for MIMO wireless communication systems. In: 4th FTRA International Conference on Computer Science and its Applications (CSA 2012), 22-25 Nov. 2012, Jeju Island, Korea. (pp. 49-57).

Chong, Jin Hui and Ng, Chee Kyun and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin (2012) A low complexity multi-layered space frequency coding detection algorithm for MIMO-OFDM. In: 4th FTRA International Conference on Computer Science and its Applications (CSA 2012), 22-25 Nov. 2012, Jeju Island, Korea. (pp. 39-47).

Chong, Pik Han and Aziz, Mohammad Gulzarul and Yusof, Yus Aniza and Naim, Mohd Nazli and Ching, N. L. and Mohd Rosdan, Faridatul Ain (2012) Modelling of simultaneous encapsulation of betacyanins and antioxidant during spray drying of red amaranth extract. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 758-766).

Chong, Pik Han and Yusof, Yus Aniza and Aziz, Mohammad Gulzarul and Chin, Nyuk Ling and Naim, Mohd Nazli and Mohd Rosdan, Faridatul Ain (2012) Modelling of the microencapsulation of betacyanins and their antioxidant activity extracted from red amaranth. In: 2nd International Symposium on Proceesing & Drying of Foods Vegetables and Fruits (ISPDFVF 2012), 18-19 June 2012, University of Nottingham, Malaysia Campus, Semenyih, Malaysia. (pp. 1-7).

Dahham, Zahraa and Sali, Aduwati and Mohd Ali, Borhanuddin and Jahan, Md. Saukat (2012) An efficient CSMA-CA algorithm for IEEE 802.15.4 wireless sensor networks. In: 1st IEEE International Symposium on Telecommunication Technologies (ISTT), 26-28 Nov. 2012, Kuala Lumpur, Malaysia. (pp. 118-123).

Dauda, Solomon Musa and Ahmad, Desa and Abdan, Khalina and Othman, Jamarei (2012) Effects of tractor speeds on the performance of a kenaf harvesting machine. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 141-150).

Deylami, Mahsa Ziabakhsh and Abdul Rahman, Russly and Bakar, Jamilah and Olusegun, Lasekan and Tan, Chin Ping (2012) Kinetics of crude peroxidase inactivation from mangosteen (Garcinia mangostana L.) pericarp by using thermal treatment. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 360-364).

Djojodihardjo, Harijono and A. Gunter, A. Aq'Grabin and Varatharajoo, Renuganth (2012) Parametric study of ground-track based performance measure requirements for the optimization of near earth twin-spacecrafts trajectory. In: AEROTECH-IV 2012-Recent Advances in Aerospace Technology, 21-22 Nov. 2012, Kuala Lumpur, Malaysia. (pp. 1-8).

Djojodihardjo, Harijono and A.Gunter, A. Aq'Grabin (2012) Parametric optimization of near-equatorial twin-spacecrafts trajectory based on ground-track performance measure requirements. In: First IAA-AAS Conference on Dynamic & Control of Space System 2012 , 19-23 Mar. 2012, California, USA . (pp. 1-16).

Djojodihardjo, Harijono and Abdul Hamid, Mohd Faisal (2012) Coanda jet lift enhancement : two-dimensional computational studies. In: 4th AUN/SEED-Net Reginal Conference on Mechanical and Aeronautical Engineering 2012, 10-11 Jan. 2012, Ho Chi Minh City, Vietnam. (pp. 1-10).

Djojodihardjo, Harijono and Abdul Hamid, Mohd Faisal (2012) Computational study on the influence of Coanda jet on airfoils: two-dimensional case. In: 28th International Congress of the Aeronautical Sciences (ICAS 2012), 23-28 Sept. 2012, Brisbane, Australia. (pp. 1-17).

Djojodihardjo, Harijono and Jamali, Hamed and Shokrani, Alireza and Mustapha, Faizal and Zahari, Rizal and Wiriadidjaja, Surjatin (2012) Computational simulation for static and dynamic load of rectangular plate in elastic region for analysis of impact resilient structure. In: AEROTECH-IV 2012-Recent Advances in Aerospace Technology, 21-22 Nov. 2012, Kuala Lumpur, Malaysia. (pp. 150-157).

Djojodihardjo, Harijono and Kek, Alvin Leong Wei (2012) Conceptual design and aerodynamic study of blended wing body business jet. In: 28th International Congress of the Aeronautical Sciences (ICAS 2012), 23-28 Sept. 2012, Brisbane, Australia. (pp. 1-13).

Djojodihardjoa, Harijono and Ramli, Alif Syamim Syazwan and Wiriadidjaja, Surjatin (2012) Kinematic and aerodynamic modelling of flapping wing ornithopter. In: International Conference on Advances Science and Contemporary Engineering 2012 (ICASCE 2012) , 24-25 Oct. 2012, Jakarta, Indonesia. (pp. 848-863).

Ee, Gee Keng and Ng, Chee Kyun and Hashim, Fazirulhisyam and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin (2012) Originator recognition (OR) path recovery mechanism for load-based routing protocol. In: 4th FTRA International Conference on Computer Science and its Applications (CSA 2012), 22-25 Nov. 2012, Jeju Island, Korea. (pp. 149-157).

El Pebrian, Darius and Yahya, Azmi and Ishola, Tajudeen Abiodun and Roodi, Siamak Moslehi and Hasan, Haslina (2012) Oil palm plantation mechanisation in totality. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 739-751).

Elias, Azhani and Che Man, Hasfalina and Samsu Baharuddin, Azhari and Othman, Jamarei and Abdullah, Nurlidah (2012) Windrow composting of paddy straw. In: World Research & Innovation Convention on Engineering & Technology 2012, 3-5 Dec. 2012, Palace of the Golden Horses, Kuala Lumpur. (pp. 451-457).

Esfahani, Mohammad Tolou Askari Sedehi and Ab Kadir, Mohd Zainal Abidin and Jasni, Jasronita (2012) A numerical method for calculating the loss of life of power transformers. In: 2012 IEEE International Power Engineering and Optimization Conference (PEOCO2012), 6-7 June 2012, Melaka, Malaysia. (pp. 29-34).

Etti, Christopher Joseph and Yusof, Yus Aniza and Chin, Nyuk Ling and Aziz, Mohammad Gulzarul (2012) Effects of particle size upon surface roughness and wall friction during compaction of Labisia pumila tablets. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 350-359).

Faiiazee, Hadee and Syed Mohamed, Syed Abdul Rahman Al-Haddad and Abdullah, Rusli and Samsudin, Khairulmizam (2012) Text mining in bioinformatics: past, present and future. In: 2012 International Conference on Information Retrieval & Knowledge Management (CAMP'12), 13-15 Mar. 2012, Kuala Lumpur, Malaysia. (pp. 327-330).

Fazli, Pardis and Che Man, Hasfalina and Mohamed Zawawi, Mohamed Azwan and Idris, Azni and Md. Shah, Umi Kalsom and Wayayok, Aimrun (2012) Effect of cultivation system on the methane emission from rice soil. In: World Research & Innovation Convention on Engineering & Technology 2012, 3-5 Dec. 2012, Palace of the Golden Horses, Kuala Lumpur. (pp. 418-427).

Galavi, Hadi and Lee, Teang Shui (2012) Uncertainty analysis of climate change impacts on runoff. In: 2012 International Conference on Future Environment and Energy, 26-28 Feb. 2012, Singapore. (pp. 235-239).

Ganjloo, Ali and Abdul Rahman, Russly and Bakar, Jamilah and Osman, Azizah and Bimakr, Mandana (2012) Feasibility of ultrasonic waves to improve mass transfer rate during osmotic dehydration of seedless guava (Psidium guajava L.). In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 162-168).

Ghobadi, Yasser and Pradhan, Biswajeet and Kabiri, Keivan and Pirasteh, Saied and Mohd Shafri, Helmi Zulhaidi and Sayyad, Gholam Abbas (2012) Use of multi-temporal remote sensing data and GIS for wetland change monitoring and degradation. In: 2012 IEEE Colloquium on Humanities, Science & Engineering Research (CHUSER 2012), 3-4 Dec. 2012, Kota Kinabalu, Sabah. (pp. 103-108).

Ghotoorlar, Saeid Mokaram and Samsudin, Khairulmizam and Ramli, Abdul Rahman and Kerdegari, Hamideh (2012) Mobile robots communication and control framework for USARSim. In: 4th International Conference on Intelligent and Advanced Systems (ICIAS2012), 12-14 June 2012, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia. (pp. 540-544).

Gires, Ezanee and Abu Talib, Abd. Rahim and Ahmad, Mohamed Tarmizi and Idris, Azni (2012) Performance test of a small-scale turbojet engine running on a palm oil biodiesel - jet a blend. In: 28th International Congress of the Aeronautical Sciences (ICAS 2012), 23-28 Sept. 2012, Brisbane, Australia. (pp. 1-12).

Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin and Cooper, Mary Ann (2012) Lightning safety scheme for sheltering structures in low-income societies and problematic environments. In: International Conference on Lightning Protection (ICLP), 2-7 Sept. 2012, Vienna, Austria. .

Gomes, Chandima and Cooray, Vernon and Rahman, Mahbubur (2012) Breakdown characteristics and optically visible discharge paths of surface flashover. In: 2012 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology (STUDENT), 6-9 Oct. 2012, Universiti Tunku Abdul Rahman, Kuala Lumpur, Malaysia. (pp. 111-116).

Gomes, Chandima and Ahmed, Munir and Zele, Diana (2012) Lightning related fish mortality: case study from Bangladesh. In: International Conference on Lightning Protection (ICLP), 2-7 Sept. 2012, Vienna, Austria. (pp. 1-5).

Harun, Harlisya and Mohd. Sharif, M. F. and Mariun, N. and Chulan, Ungku and Khazani, Khamizon (2012) Development of hierarchical analytical scheduling (HAS) - a conceptual framework. In: 2012 UKSim-AMSS 6th European Modelling Symposium, 19-21 Nov. 2012, Parahyangan Catholic University, Bandung, Indonesia. (pp. 448-452).

Hasaman, Norfarahin and Shamsudin, Rosnah and Mohd Adzahan, Noranizan and Abdul Rahman, Russly (2012) Effect of soaking time on the removal of pericarp of green pepper berries. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 515-519).

Hashemi, Ali and Ahmad, Desa (2012) The effects of Comboplow on some soil physical properties of University Putra Malaysia Research Farm. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 72-80).

Hashim, Norhashila and Janius, Rimfiel and Abdul Rahman, Russly and Osman, Azizah and Shitan, Mahendran and Zude, Manuela (2012) Evaluation of chilling injury in bananas using backscattered laser imaging. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 674-681).

Hedayati, Mahdi and Mariun, Norman (2012) Assessment of different voltage sags on performance of induction motors operated with shunt FACTS. In: 3rd Power Electronics and Drive Systems Technology (PEDSTC 2012), 15-16 Feb. 2012, Tehran, Iran. (pp. 483-489).

Hisham, Hisham Kadhum and Abas, Ahmad Fauzi and Mahdiraji, Ghafour Amouzad and Mahdi, Mohd Adzir and Mahamd Adikan, Faisal Rafiq (2012) Effect of temperature and external optical feedback on intensity and phase noise characteristics in single-mode fiber grating Fabry-Perot laser. In: 3rd International Conference on Photonics (ICP), 1-3 Oct. 2012, Penang, Malaysia. (pp. 370-376).

Hussain, Siti Aslina and Tan, Hong Tat and Idris, Azni (2012) Simulation of cosmo balls in wastewater treatment. In: 14th Asia Pacific Confederation of Chemical Engineering Congress, 22–24 Feb. 2012, Singapore. .

Ibrahim, Fatimah and Ahmad, Siti Anom (2012) Assessment of upper body muscle activity during salat and stretching exercise : a pilot study. In: IEEE-EMBS International Conference on Biomedical and Health Informatics , 5-7 Jan. 2012, Hong Kong. (pp. 412-415).

Ibrahim, Mohd Nordin and Sarker, Md. Sazzat Hossain and Ab. Aziz, Norashikin and Punan, Mohd Salleh (2012) Performance evaluation of industrial scale fluidized bed paddy dryer. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 22-29).

Inayatullah, Othman and Jamaludin, Nordin and Mohd Nor, Mohd Jailani and Mat, Fauziah and Baharuddin, Aziz (2012) Assessment engine oil using UKM acoustic emission energy viscosity model(ηEAEUKM). In: International Conference on Applications and Design in Mechanical Engineering 2012 (ICADME 2012) , 27-28 Feb. 2012, Pulau Pinang, Malaysia. .

Ishola, Tajudeen Abiodun and Yahya, Azmi and Mohamed Shariff, Abdul Rashid and Abd Aziz, Samsuzana (2012) Variable rate technology fertilizer applicator for oil palm plantation. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 520-534).

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Cooray, Vernon (2012) Analytical fields expressions due to lightning channel considering variation of return stroke velocities along the lightning channel. In: International Conference on Lightning Protection (ICLP), 2-7 Sept. 2012, Vienna, Austria. (pp. 1-5).

Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Cooray, Vernon (2012) Improved algorithm for evaluation of lightning current using measured field at far distances from lightning channel. In: International Conference on Lightning Protection (ICLP), 2-7 Sept. 2012, Vienna, Austria. .

Izadi, Mehdi and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima (2012) On the consideration of the channel angle effects on the electromagnetic fields associated with inclined lightning channel. In: 2012 IEEE International Power Engineering and Optimization Conference (PEOCO2012), 6-7 June 2012, Melaka, Malaysia. (pp. 153-158).

Jaafar, Haslina and Ali Termizi, Ahmad Fariz and Ahmad, Siti Anom and Md Yunus, Nurul Amziah (2012) Intelligent massage chair based on blood pressure and heart rate. In: 2012 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 17-19 Dec. 2012, Langkawi, Kedah, Malaysia. (pp. 514-518).

Jayaratne, Chandana and Gomes, Chandima (2012) Public perceptions and lightning safety education in Sri Lanka. In: International Conference on Lightning Protection (ICLP), 2-7 Sept. 2012, Vienna, Austria. (pp. 1-7).

Jordehi, Ahmad Rezaee and Jasni, Jasronita (2012) Approaches for FACTS optimization problem in power systems. In: 2012 IEEE International Power Engineering and Optimization Conference (PEOCO2012), 6-7 June 2012, Melaka, Malaysia. (pp. 355-360).

Kabiri, Keivan and Pradhan, Biswajeet and Rezai, Hamid and Ghobadi, Yasser and Moradi, Masoud (2012) Fluctuation of sea surface temperature in the Persian Gulf and its impact on coral reef communities around Kish Island. In: 2012 IEEE Colloquium on Humanities, Science & Engineering Research (CHUSER 2012), 3-4 Dec. 2012, Kota Kinabalu, Sabah. (pp. 164-167).

Kakaee, Majid H. and Seyed Mohammad Saleh, Seyedzadeh Kharazi and Ahmad Anas, Siti Barirah and Fadhil, Hilal Adnan and Sahbudin, Ratna Kalos Zakiah and Mokhtar, Makhfudzah (2012) Performance analysis of hybrid SAC-OCDMA/WDMA system using Random Diagonal code. In: 3rd International Conference on Photonics 2012 (ICP 2012), 1-3 Oct. 2012, Penang, Malaysia. (pp. 285-289).

Kakahy, Amer Najat Najmaldeen and Ahmad, Desa and Abdullahi, Abubakar Sadiq (2012) Effects of planting distance on yield of beans (vicia faba l.) under drip irrigation system. In: National Conference On Agricultural And Food Mechanization, 10 - 12 Jan. 2012, Kuching, Sarawak. .

Kakahy, Amer Najat Najmaldeen and Ahmad, Desa and Hamid, Md. Akhir and Sulaiman, Shamsuddin and Aris, Ishak (2012) Effects of knife angles and cutting speeds on pulverization of sweet potato vines. In: USM-AUT International Conference (UAIC) 2012, 17-18 Nov. 2012, Bayview Beach Resort, Penang, Malaysia. (pp. 45-50).

Keramati, Ehsan and Teimoortashloo, Mazdak and Mohd Noor, Samsul Bahari (2012) Application of optimized higher order sliding mode control on MEMS optical switch. In: 12th International Workshop on Variable Structure Systems (VSS 2012), 12-14 Jan. 2012, Mumbai, India. (pp. 268-272).

Kerdegari, Hamideh and Samsudin, Khairulmizam and Ramli, Abdul Rahman and Ghotoorlar, Saeid Mokaram (2012) Evaluation of fall detection classification approaches. In: 4th International Conference on Intelligent and Advanced Systems (ICIAS2012), 12-14 June 2012, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia. (pp. 131-136).

Khatib, Farzan and Mahmud, Rozi and Mashohor, Syamsiah and Saripan, M. Iqbal and Raja Abdullah, Raja Syamsul Azmir (2012) Automated cystic mass extraction from ultrasound phantom images. In: Asia Modelling Symposium 2012 (AMS 2012), the 6th Asia International Conference on Mathematical Modelling and Computer Simulation, 29-31 May 2012, Kuala Lumpur, Malaysia and Bali, Indonesia. (pp. 54-58).

Khatib, Farzan and Mahmud, Rozi and Mashohor, Syamsiah and Saripan, M. Iqbal and Raja Abdullah, Raja Syamsul Azmir (2012) Automatic tumor detection in ultrasound breast images: a phantom study. In: 4th International Conference on Computational Intelligence, Communication Systems & Networks (CICSyN 2012), 24-26 July 2012, Phuket, Thailand. (pp. 427-431).

Khosropanah, Pegah and Ramli, Abd Rahman and Ashurov, Rashvan and Ahmedov, Anvarjon (2012) Detection of epileptic spikes in egg signal using wavelet transform and adaptive neuro – fuzzy inference system(ANFIS) techniques. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 583-590).

Kim, Ern Foong and Djojodihardjo, Harijono (2012) Conceptual design and aerodynamic study of joined-wing business jet aircraft. In: 28th International Congress of the Aeronautical Sciences (ICAS 2012), 23-28 Sept. 2012, Brisbane, Australia. (pp. 1-11).

Kwong, Qi Jie and Adam, Nor Mariah and Goh, Sind Hoi and Raghavan, Vijay R. (2012) Miscellaneous electric loads in tropical buildings - an opportunity for energy conservation improvement. In: 10th Eco-Energy and Materials Science and Engineering Symposium, 5-8 Dec. 2012, Thailand. .

Lawal, Sani Mohammed and Hizam, Hashim and Toudeshki, Arash Mohammadi and Gomes, Chandima and Jasni, Jasronita (2012) Optimal power demand curve: a case study in Universiti Putra Malaysia. In: 2012 IEEE International Conference on Power and Energy (PECon), 2-5 Dec. 2012, Kota Kinabalu, Sabah. (pp. 223-226).

Lee, Weng Choun and Gomes, Chandima and Ab Kadir, Mohd Zainal Abidin and Wan Ahmad, Wan Fatinhamamah (2012) Analysis of earth resistance of electrodes and soil resistivity at different environments. In: International Conference on Lightning Protection (ICLP), 2-7 Sept. 2012, Vienna, Austria. .

Leman, Zulkiflle and Mohammad Borhan, and Kheiri, Abouzar (2012) Feasibility study of liquefied petroleum gas composite cylinder for household users in Malaysia. In: World Research & Innovation Convention on Engineering & Technology 201 2, 3-5 Dec. 2012, Kuala Lumpur, Malaysia. (pp. 26-28).

Liaghat, Shohreh and Mansor, Shattri and Mohd Shafri, Helmi Zulhaidi and Meon, Sariah and Ehsani, Reza and Md Nor Azam, Siti Hajar (2012) FT-IR absorbance data for early detection of oil palm fungal disease infestation. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 176-180).

Lombigit, Lojius and Khalid, Mohd Ashhar and Hamidon, Mohd Nizar and Sulaiman, Nasri (2012) Noise measurement in amplifying system for radiation detectors. In: 2012 IEEE International Conference on Circuits and Systems (ICCAS), 3-4 Oct. 2012, Kuala Lumpur, Malaysia. (pp. 218-222).

Lubasi, Foster Chileshe and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Cooper, Mary Ann (2012) Case studies of lightning related injuries and property damage in Zambia. In: International Conference on Lightning Protection (ICLP), 2-7 Sept. 2012, Vienna, Austria. .

M. Thirunavakkarasu, Punithavathi and Al-Qazwini, Yusser and Onn, Baharil Izhan and Muhammad Noor, Ahmad Shukri (2012) Fiber Bragg grating based surface plasmon resonance sensor utilizing FDTD for alcohol detection applications. In: 3rd International Conference on Photonics (ICP), 1-3 Oct. 2012, Penang, Malaysia. (pp. 93-97).

Mahdavi, Farzaneh Akhavan and Ahmad, Siti Anom (2012) Surface electromyography control system based on wavelet transform: a review. In: National Conference of Electric and Electronic Engineering, 8-9 May 2012, Universiti Tun Hussein Onn Library, Johor. (pp. 274-281).

Mailah, Nashiren Farzilah and Tuan Othman, Sharifah Sakinah and Aris, Ishak and Misron, Norhisam and Ab Kadir, Mohd Zainal Abidin and Tsuyoshi, Hanamoto and Hiroaki, Yamada (2012) Harmonics reduction of three phase five-level Neutral-Point-Clamped Multilevel Inverter. In: 2012 IEEE International Conference on Power and Energy (PECon), 2-5 Dec. 2012, Kota Kinabalu, Sabah. (pp. 13-17).

Mamdoohi, Ghazaleh and Ahmad, Bilal A. and Al-Alimi, Abdulmoghni Ali Wazae and Mahdi, Mohd Adzir and Abas, Ahmad Fauzi and Mokhtar, Makhfudzah and Kheradmand, Behnam (2012) Characterization of Raman gain for different gain medium. In: 3rd International Conference on Photonics (ICP), 1-3 Oct. 2012, Penang, Malaysia. (pp. 18-22).

Mamdoohi, Ghazaleh and Mahdi, Mohd Adzir and Abas, Ahmad Fauzi and Mokhtar, Makhfudzah and Kheradmand, Behnam (2012) Effect of double-pass and single-pass architecture in Brillouin-Raman fiber laser. In: 3rd International Conference on Photonics (ICP), 1-3 Oct. 2012, Penang, Malaysia. (pp. 192-194).

Mansor, Atikah and Shamsudin, Rosnah and Mat Hashim, Dzulkifly (2012) Rheological properties of local pineapple fruit jam. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 277-281).

Mansor, Hasmah and Khan, Sheroz and Gunawan, Teddy Surya and Mohd Noor, Samsul Bahari (2012) A development of self-tuning quantitative feedback theory. In: International Conference on Computer and Communication Engineering (ICCCE 2012), 3-5 July 2012, Kuala Lumpur, Malaysia. (pp. 873-876).

Mat, Fauziah and Siregar, Rakhmad Arief and Ismail, K. A. and Yaacob, Sazali and Ahmad, M. and Othman, Inayatullah (2012) Geometrical effect on the behavior of circular and elliptic tubes under dynamic axial loading. In: International Conference on Applications and Design in Mechanical Engineering 2012 (ICADME 2012) , 27-28 Feb. 2012, Pulau Pinang, Malaysia. .

Mehdizadeh, Abbas and Raja Abdullah, Raja Syamsul Azmir and Hashim, Fazirulhisyam (2012) Secure group communication scheme in wireless IPv6 networks: an experimental test-bed. In: International Symposium on Communications and Information Technologies (ISCIT), 2-5 Oct. 2012, Gold Coast, Australia. (pp. 724-729).

Mileo, Vanessa Carolina Laverde and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima (2012) Performance of backfill materials under impulse and AC testings. In: International Conference on Lightning Protection (ICLP), 2-7 Sept. 2012, Vienna, Austria. .

Mirfendereski, Shojaeddin and Abdul Wahab, Noor Izzri and Jasni, Jasronita and Othman, Mohammad Lutfi (2012) Small signal stability assessment and control of power systems. In: 2012 IEEE International Power Engineering and Optimization Conference (PEOCO2012), 6-7 June 2012, Melaka, Malaysia. (pp. 515-520).

Moghaddam, Farhang Padidaran and Sulaiman, Riza and Daud, Mohamed (2012) Key.net: a system and method for accessing offline lock system by the internet- made key using barcode technology. In: IEEE Symposium on Computers and Informatics (ISCI 2012), 18-20 Mar. 2012, Penang, Malaysia. (pp. 1-6).

Moghbel, Mehrdad and Mahmud, Rozi and Mashohor, Syamsiah and Saripan, M. Iqbal (2012) Random walkers based segmentation method for breast thermography. In: IEEE EMBS International Conference on Biomedical Engineering and Sciences (IECBES), 17-19 Dec. 2012, Langkawi, Kedah, Malaysia. (pp. 627-630).

Mohamad Shahapuzi, Nur Syafikah and Taip, Farah Saleena and Ab. Aziz, Norashikin and Ahmedov, Anvarjon (2012) Experimental studies on the effect of airflow on oven temperature and product qualities in cake baking process. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 625-634).

Mohamad Shukery, Mohamad Firdza and Suryanto, Hadi and Yahya, Azmi (2012) Appropriate technology for windrow composting of oil palm empty fruit bunches. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 504-514).

Mohamed Ramli, Norulhuda and Md. Yusoff, Fatimah and Verdegem, Marc and Mohamed Din, Mohamed Shariff and Verreth, Johan (2012) Ammonium uptake by two fresh water periphytic microalgae immobilized in alginate beads. In: 2012 Malaysia-Thailand Graduate Forum in Life Science, Food Science and Agriculture, 12-14 Dec. 2012, Faculty of Science, Mahidol University, Bangkok, Thailand. (p. 35).

Mohamedou, Ahmed and Sali, Aduwati and Mohd Ali, Borhanuddin (2012) Genetic fuzzy scheduler for spectrum sensing in cognitive radio networks. In: 12th Symposium on Communications and Information Technologies (ISCIT 2012), 2-5 Oct. 2012, Gold Coast, Australia. (pp. 770-775).

Mohammadi, Ahmad and Ismail, Alyani and Mahdi, Mohd Adzir and Raja Abdullah, Raja Syamsul Azmir and Mohd Isa, Maryam and Sadrolhosseini, Amir Reza (2012) Carbon-nanotube-based FR-4 patch antenna as a bio-material sensor. In: International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 4-6 Sept. 2012, Kuching, Sarawak. (pp. 724-728).

Mohd Aris, Khairul Dahri and Mustapha, Faizal and Salit, Mohd Sapuan and Abang Abdul Majid, Dayang Laila (2012) A condition structural index (CSI) using principal component analysis (PCA) for normal, damage and repair conditions of CFRP laminate. In: International Conference on Advances in Structural Health Management and Composite Structures (ASHMCS 2012), 29-31 Aug. 2012, Jeonju, South Korea. (pp. 1-5).

Mohd Azubir, Nor Aziah and Md Ishak, Nizam Hanis and Ahmad, Salmiah and Akmeliawati, Rini and Toha, Siti Fauziah and Ksm Kader Ibrahim, Babul Salam and Hassan, Mohd Khair (2012) Control strategy of segregation on HVAC energy efficiency as non propulsion electrical hotel load in EV. In: 2012 IEEE International Conference on Power and Energy (PECon), 2-5 Dec. 2012, Kota Kinabalu, Sabah. (pp. 611-615).

Mohd Dom, Zanariah and Ling, Tau Chuan and Yusoff, Rozita (2012) Optimization of lipase-catalyzed esterification for the production of medium-chain acylgcerols from palm oil fatty acid distillate: using response surface methodology. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 566-574).

Mohd Husin, Ezrin and Wayayok, Aimrun and Mohd Soom, Mohd Amin and Bejo, Siti Khairunniza (2012) Development of soil nitrogen mapping system using apparent soil electrical conductivity sensor for paddy field. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 203-210).

Mohd Noor, Nisfariza Maris and Steven, M. and Boyd, D. S. and Mohd Shafri, Helmi Zulhaidi and Abu Seman, Idris (2012) Non-invasive determination of chlorophyll content in oil palm seedlings using field spectroscopy. In: 2012 Second International Workshop on Earth Observation and Remote Sensing Applications, 8-11 June 2012, Shanghai, China. .

Mohd Nor, Mohd Zuhair and A. Talib, Rosnita and Mohd Adzahan, Noranizan and Chin, Nyuk Ling and Hashim, Kamaruddin (2012) Increasing resistant starch content in fish crackers through different cooking temperatures in repetitive cooking-chilling cycles. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 482-487).

Mohd Rosdan, Faridatul Ain and Yusof, Yus Aniza and Aziz, Mohammad Gulzarul and Chin, Nyuk Ling and Mohd Amin, Nor Amaiza and Mohd Ghazali, Hasanah and Chong, Pik Han (2012) Physicochemical properties of Josapine pineapple (Ananas comosus). In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 62-71).

Mohd Thani, Nurfatimah and Mustapa Kamal, Siti Mazlina and Taip, Farah Saleena and Ismail, Ismayadi (2012) Process development of 'dadih' preparation using xylitol as substitute sugar: effect on thermal and texture characteristics. In: Chemeca 2012, 23-26 Sep. 2012, Wellington, New Zealand. .

Mohd Yusuff, Rosnah and A., Othman (2012) Lean manufacturing implementation in a plastic molding industry. In: 11th Global Congress on Manufacturing and Management (GCMM2012), 28-30 Nov. 2012, Auckland, New Zealand. .

Mohd Zainuri, Muhammad Ammirrul Atiqi and Mohd Radzi, Mohd Amran and Che Soh, Azura and Abd Rahim, Nasrudin (2012) Adaptive P&O-fuzzy control MPPT for PV boost dc-dc converter. In: 2012 IEEE International Conference on Power and Energy (PECon), 2-5 Dec. 2012, Kota Kinabalu, Sabah. (pp. 524-529).

Mokri, Siti Salasiah and Saripan, M. Iqbal and Marhaban, Mohammad Hamiruce and Nordin, Abdul Jalil (2012) Lung segmentation in CT for thoracic PET-CT registration through visual study. In: 2012 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES 2012), 17-19 Dec. 2012, Langkawi, Kedah, Malaysia. (pp. 550-554).

Motlagh, Omid Reza Esmaeili and Jamaludin, Zamberi and Tang, Sai Hong (2012) Modelling dynamic scenarios using fuzzy cognitive map. In: 2nd International Conference on Design and Concurrent Engineering (iDECON2012), 15-16 Oct. 2012, Melaka, Malaysia. (pp. 323-327).

Muniandy, Ratnasaamy and A. Aziz, Md. Manniruzaman and Hassim, Salihudin (2012) Preliminary study on the use of microwave permittivity in the determination of asphalt binder penetration and viscosity. In: Hong Kong International Conference on Engineering and Applied Science, 14 -16 Dec. 2012, SkyCity Marriot Hotel, Hong Kong. (pp. 103-112).

Musarudin, Marianie and Saripan, M. Iqbal and Mashohor, Syamsiah and Mohd Saad, Wira Hidayat and Hashim, Suhairul and Nordin, Abdul Jalil (2012) Preliminary results from attenuation correction for MCNP-generated PET image. In: 2012 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES 2012), 17-19 Dec. 2012, Langkawi, Kedah, Malaysia. (pp. 907-910).

Mustaffha, Samihah and Bejo, Siti Khairunniza and Wan Ismail, Wan Ishak (2012) Artificial neural network in predicting rice yield. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 232-234).

Mwinyi, Amir Kombo and Syed Mohamed, Syed Abdul Rahman Al Haddad and Abdullah, Rusli and Hashim, Shaiful Jahari (2012) Review on ubiquitous education system with multi-agent synchronization on mobile learning application environment. In: International Conference on Mobile Learning, Applications, and Services, 18-20 Sep. 2012, Universiti Teknikal Malaysia, Melaka. (pp. 52-57).

Naim, Mohd Nazli and Abu Bakar, Noor Fitrah and Tan, Kah Boon and Saallah, Suryani (2012) Development of nano-order powder via electrospray. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 783-790).

Nasaruddin, Norashikin and Wong, Shaw Voon and Yap, Bee Wah and Lazim, Mohamad Alias (2012) Fatality prediction model for motorcycle accidents in Malaysia. In: 2012 International Conference on Statistics in Science, Business and Engineering (ICSSBE 2012), 10-12 Sept. 2012, Langkawi, Kedah. .

Nasimi, Meysam and Hashim, Fazirulhisyam and Ng, Chee Kyun (2012) Characterizing energy efficiency for heterogeneous cellular networks. In: 2012 IEEE Student Conference on Research and Development (SCOReD), 5-6 Dec. 2012, Penang, Malaysia. (pp. 198-202).

Nejad, Mohsen Fadaee and Mohd Radzi, Mohd Amran and Ab Kadir, Mohd Zainal Abidin and Hizam, Hashim (2012) Hybrid renewable energy systems in remote areas of equatorial countries. In: 2012 IEEE Student Conference on Research and Development (SCOReD), 5-6 Dec. 2012, Penang, Malaysia. (pp. 11-16).

Nematollahi, Mohammad Ali and Syed Mohamed, Syed Abdul Rahman Al-Haddad and C. Doraisamy, Shyamala and Saripan, M. Iqbal (2012) Digital audio and speech watermarking based on the multiple discrete wavelets transform and singular value decomposition. In: 2012 Sixth Asia Modelling Symposium, 29-31 May 2012, Bali, Indonesia. (pp. 109-114).

Ng, Chee Kyun and Fam, Jiang Gi and Noordin, Nor Kamariah (2012) Finger triggered virtual musical instruments. In: 4th FTRA International Conference on Computer Science and its Applications (CSA 2012), 22-25 Nov. 2012, Jeju Island, Korea. (pp. 29-37).

Ng, Hui Suan and Mokhtar, Mohd Noriznan and Ariff, Arbakariya and Ling, Tau Chuan (2012) Separation of cyclodextrins (CDs) using aqueous two-phase system. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 319-322).

Ng, L. T. and Han, C. P. and Yusof, Yus Aniza and Chin, Nyuk Ling and A. Talib, Rosnita and Aziz, Mohammad Gulzarul (2012) Quality of spray-dried pitaya fruit powder as natural colourant. In: 2nd International Symposium on Proceesing & Drying of Foods, Vegetables and Fruits (ISPDFVF 2012), 18-19 June 2012, University of Nottingham, Malaysia Campus,Semenyih, Malaysia.. (pp. 1-5).

O. K. Rahmat, Rahmita Wirza and Al-Tairi, Zaher Hamid and Saripan, M. Iqbal and Sulaiman, Puteri Suhaiza (2012) Removing shadow for hand segmentation based on background subtraction. In: International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2012), 26-28 Nov. 2012, Kuala Lumpur, Malaysia. (pp. 481-485).

Olukayode, Ojo Adedayo and Mohd Isa, Maryam and Budayawan, Khairi (2012) Artificial neural network model for microwave propagation in water melon. In: 2012 IEEE International Conference on Circuits and Systems (ICCAS), 3-4 Oct. 2012, Kuala Lumpur, Malaysia. (pp. 147-149).

Othman, Siti Hajar and Abdul Rashid, Suraya and Mohd Ghazi, Tinia Idaty and Abdullah, Norhafizah (2012) TiO2 nanoparticle coating for potential antimicrobial application in food industry. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 541-545).

Quek, Meei Chien and Chin, Nyuk Ling and Yusof, Yus Aniza (2012) Multiple linear regression modelling of hot water extraction of soursop juice. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 313-318).

R. N., Firdaus and Misron, Norhisam and M., Harizan and Mariun, Norman and Aris, Ishak and Nirei, Masami and Wakiwaka, Hiroyuki (2012) Evaluation of torque characteristics single phase double stator BLDC permanent magnet motor : parallel and series magnetic circuit. In: The 2012 Asia Pasific Symposium on Applied Electromagnetics & Mechanics, 25-27 Jul. 2012, Ho Chi Minh, Vietnam. .

Radzuan, Mohd Nazren and Abdan, Khalina and Ismail, Alyani and Janius, Rimfiel (2012) Determination of the relationship between the moisture content and microwave dielectric properties in kenaf stem. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 612-617).

Raja Othman, Raja Nor Firdaus Kashfi and Misron, Norhisam and Mariun, Norman and Aris, Ishak and Nirei, Masami and Wakiwaka, Hiroyuki (2012) Comparison of the torque characteristics of ferromagnetic rotor double stator brushless DC permanent magnet motor. In: 2012 IEEE International Conference on Power and Energy (PECon), 2-5 Dec. 2012, Kota Kinabalu, Sabah. (pp. 408-413).

Rameli, Norhidayu and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi and Gomes, Chandima and Jasni, Jasronita (2012) On the influence of inclined lightning channel on lightning induced voltage evaluation. In: International Conference on Lightning Protection (ICLP), 2-7 Sept. 2012, Vienna, Austria. (pp. 1-5).

Romli, Fairuz Izzudin and Tan, Kai Jun and Teong, Chee Khoon and Ong, Thiam Chun and Koo, Teck Hock (2012) Factorial study on airport delay for flight scheduling process. In: 2012 International Conference on Economics, Business Innovation, 5-6 May 2012, Kuala Lumpur, Malaysia. (pp. 180-184).

Roslan, Jumardi and Mustapa Kamal, Siti Mazlina and Md. Yunos, Khairul Faezah and Abdullah, Norhafizah (2012) Nutritional and amino acid composition of red tilapia fish (Oreochromis niloticus). In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 752-757).

Rusli, Julie Roslita and Mohd Sidek, Roslina and Wan Hasan, Wan Zuha (2012) Development of automated neighborhood pattern sensitive fault syndrome generator for SRAM. In: 10th IEEE International Conference on Semiconductor Electronics (ICSE 2012), 19-21 Sept. 2012, Grand Millenium Hotel, Kuala Lumpur. (pp. 482-485).

Sabaruddin, Ainul Aniyah and Wiriadidjaja, Surjatin and Abang Abdul Majid, Dayang Laila and Djojodihardjo, Harijono and Ahmad, Mohamed Tarmizi (2012) Variable valve timing on piston engine for lightweight aircraft. In: AEROTECH-IV 2012-Recent Advances in Aerospace Technology, 21-22 Nov. 2012, Kuala Lumpur, Malaysia. .

Sadrolhosseini, Amir Reza and Muhammad Noor, Ahmad Shukri and Abd. Moksin, Mohd Maarof and Abdi, Mahnaz M. and Soleimani, Hassan and Abas, Ahmad Fauzi and Talib, Zainal Abdin (2012) Polypyrrole thin film sensor base surface plasmon resonance for detection of Cu(II) and Fe(III) in aqueous solution. In: 2nd International Conference on Fundamental and Applied Sciences (ICFAS2012), 12-14 June 2012, Kuala Lumpur Convention Centre, Kuala Lumpur. (pp. 200-204).

Salit, Mohd Sapuan (2012) Natural fibres : alternative fibres for polymer composites. In: UPM-UniKL Symposium on Polymeric Materials and The 3rd postgraduate Seminar on Natural Fibre Composites 2012 , 2 Feb. 2012, Alor Gajah, Melaka . .

Salit, Mohd Sapuan and EI-Shekeil, Y. A. (2012) Properties of kenaf fiber-reinforced elastomer composites. In: 3rd International Conference of Institution of Engineering and Technology (IET), 17 - 18 September 2012, Brunei Darussalam. .

Salman, Mustafa Ismael and Ng, Chee Kyun and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin and Sali, Aduwati (2012) Energy efficient transmission for LTE cellular system. In: International Conference on Computer and Communication Engineering (ICCCE 2012), 3-5 July 2012, Kuala Lumpur, Malaysia. (pp. 222-227).

Sarker, Md. Sazzat Hossain and Ibrahim, Mohd Nordin and Ab. Aziz, Norashikin and Punan, Mohd Salleh (2012) Comparison of performances of industrial scale inclined bed paddy dryers. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 653-664).

Sayuti, M. and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar (2012) The influence of mechanical mold vibration on temperature distribution and physical properties of Al-11.8%Si matrix composites. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Shafad, Mohd Raside and Ahamad, Intan Salwani and Idris, Azni and Zainal Abidin, Zurina (2012) Extraction of dragon fruit foliage as natural coagulant for water treatment. In: International Conference on Civil and Environmental Engineering Sustainability , 3-5 Apr. 2012, Johor Bahru, Malaysia. .

Shakerardekani, Ahmad and Karim, Roselina and Mohd Ghazali, Hasanah and Chin , Nyuk Ling (2012) Development of pistachio spread using different formulations. In: 11th International Annual Symposium on Sustainability Science and Management, 9-11 Jul. 2012, Kuala Terengganu, Malaysia. (pp. 514-520).

Shamshiri, Ramin and Wan Ismail, Wan Ishak and Mohd Kassim, Muhamad Saufi (2012) Design and simulation of control systems for a field survey mobile robot platform. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 706-717).

Shamshiri, Ramin and Wan Ismail, Wan Ishak and Moradi, Mona (2012) Design and analysis of full-state feedback controller for a tractor active suspension. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 591-597).

Shamsuddin, Rosnah and M. , Nur Adila Akma and Pua, Ming Yee (2012) Machine for making pineapple roll tarts. In: National Food Technology Seminar 2012, 6-8 Mar. 2012, Melaka, Malaysia. (pp. 280-282).

Shamsudin, Intan Soraya and Anuar, Mohd Shamsul and Yusof, Yus Aniza and Mohd Hanif, Ahmad Husni and Mohd Tahir, Suraya (2012) Compaction of urea 46% nitrogen by uniaxial die compaction. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 575-582).

Shanableh, A. and Imteaz, M. and Merabtene, T. and Ahsan, A. (2012) A framework for reducing water demand in multi-storey and detached dwellings in the United Arab Emirates. In: 7th International Conference on "Water Sensitive Urban Design", 21-23 Feb. 2012, Melbourne, Australia. (pp. 1-11).

Shargh, Raheleh Sonee and Al-Mansoori, Mohammed Hayder and Ahmad Anas, Siti Barirah and Sahbudin, Ratna Kalos Zakiah and Abu Bakar, Muhammad Hafiz and Mahdi, Mohd Adzir (2012) Effect of Raman pump direction on conventional multiwavelength Brillouin-Raman fiber laser. In: 3rd International Conference on Photonics 2012 (ICP 2012), 1-3 Oct. 2012, Penang, Malaysia. (pp. 184-186).

Shashikant, Veena and Mohamed Shariff, Abdul Rashid and Nordin, Laili and Pradhan, Biswajeet (2012) Estimation of above ground biomass of oil palm trees by PALSAR. In: 2012 IEEE Colloquium on Humanities, Science & Engineering Research (CHUSER 2012), 3-4 Dec. 2012, Kota Kinabalu, Sabah. (pp. 838-841).

Shayestegan, Mohsen and Marhaban, Mohammad Hamiruce (2012) Mobile robot safe navigation in unknown environment. In: IEEE International Conference on Control System, Computing and Engineering 2012, 23-25 Nov. 2012, Penang, Malaysia. (pp. 44-49).

Shokrani, Mohammad Reza and Hamidon, Mohd Nizar and Khoddam, Mojtaba and Najafi, Vali (2012) A UHF micro-power CMOS rectifier using a novel diode connected CMOS transistor for micro-sensor and RFID applications. In: IEEE International Conference on Electronics Design, Systems and Applications (ICEDSA 2012), 5-6 Nov. 2012, Seri Pacific Hotel, Kuala Lumpur. (pp. 234-238).

Show, Pau Loke and Anuar, Mohd Shamsul and Yusof, Yus Aniza and Ariff, Arbakariya and Ling, Tau Chuan (2012) Enhancement the production of lipase derived from Bukhoderia cenopacia ST8 by optimization of the fermentation operation. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 117-121).

Siow, Chun Lim and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Buba, Sani Dahiru (2012) Preliminary results of the performance of grounding electrodes encased in bentonite-mixed concrete. In: International Conference on Lightning Protection (ICLP), 2-7 Sept. 2012, Vienna, Austria. .

Siow, Chun Lim and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Jasni, Jasronita (2012) Ambiguity of grounding specifications: IEC 62305 revisited. In: International Conference on Lightning Protection (ICLP), 2-7 Sept. 2012, Vienna, Austria. .

Sreenivasan, S. and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Abdan, Khalina (2012) Recent developments of kenaf fiber rein-forced thermoset composites: a review. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Sudin, Nor Munira and Bejo, Siti Khairunniza (2012) Immature paddy detection using image processing technique. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 799-806).

Sumgap, Nor Hafizah and Bejo, Siti Khairunniza (2012) Relationship between paddy soil moisture and image texture. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 777-782).

Supeni, Eris Elianddy and Epaarachchi, Jayantha Ananda and Islam, Md Mainul and Lau, Kin Tak (2012) Design of smart structures for wind turbine blades. In: 2nd Malaysian Postgraduate Conference (MPC2012), 7-9 July 2012, Bond University, Gold Coast, Queensland, Australia. (pp. 20-36).

Taherzadeh, Ebrahim and Mohd Shafri, Helmi Zulhaidi and Mansor, Shattri and Ashurov, Ravshan (2012) A comparison of hyperspectral data and worldview-2 images to detect impervious surface. In: 4th International Workshop on Hyperspectral Image and Signal Processing (WHISPERS 2012), 4-7 June 2012, Shanghai, China. .

Tanha, Maryam and Hashim, Fazirulhisyam (2012) An intrusion tolerant system for improving availability in smart grid control centers. In: 18th IEEE International Conference on Networks (ICON), 12-14 Dec. 2012, Singapore. (pp. 434-440).

Tanha, Maryam and Torshizi, Seyed Dawood Sajjadi and Abdullah @ Selimun, Mohd Taufik and Hashim, Fazirulhisyam (2012) An overview of attacks against digital watermarking and their respective countermeasures. In: 2012 International Conference on Cyber Security, Cyber Warfare and Digital Forensic (CyberSec), 26-28 June 2012, Kuala Lumpur, Malaysia. (pp. 265-270).

Tavakkoli, Tannaz and Nowrouzi, Majid and Mohammad, Thamer Ahmad (2012) Effect of changing flow rate on habitat suitability of tinfoil barb in upstream Langat River using CASiMiR model. In: 2nd International Conference on Socio-Political and Technological Dimensions of Climate Change (STDCC 2012), 19-21 Nov. 2012, Putrajaya, Malaysia. (pp. 174-181).

Tey, Rong Xian and Kamsani, Noor Ain and Mohd Sidek, Roslina and Md Yunus, Nurul Amziah and Mohd Isa, Maryam (2012) Emulator development and USB implementation on SDKP16. In: 2012 IEEE International Conference on Circuits and Systems (ICCAS), 3-4 Oct. 2012, Kuala Lumpur, Malaysia. (pp. 282-286).

Torshizi, Seyed Dawood Sajjadi and Lo, Ka Kien and Kwong, Kae Hsiang and Ting, Alvin Kee Ngoh and Heng, David Tze Chieng and Abbas, Mazlan and Lim , Heng Siong and Hashim, Fazirulhisyam (2012) An investigation of vegetation effect on the performance of IEEE 802.11n technology at 5.18 GHz. In: IET International Conference on Wireless Communications and Applications (ICWCA), 8-10 Oct. 2012, Kuala Lumpur, Malaysia. (pp. 1-6).

Toudeshki, Arash Mohammadi and Mariun, Norman and Hizam, Hashim and Abdul Wahab, Noor Izzri (2012) The energy and cost calculation for a Marx pulse generator based on input dc voltage, capacitor values and number of stages. In: 2012 IEEE International Conference on Power and Energy (PECon), 2-5 Dec. 2012, Kota Kinabalu, Sabah. (pp. 745-749).

Tuan Abdul Rahman, Tuan Ahmad Zahidi and Mat Darus, Intan Zaurah (2012) Active vibration control using pole placement method of a flexible plate structure optimised by genetic algorithm. In: 2012 IEEE Conference on Control, Systems & Industrial Informatics (ICCSII 2012), 23-26 Sept. 2012, Bandung, Indonesia. (pp. 92-97).

Vaithilingam, Chockalingam Aravind and Misron, Norhisam and Aris, Ishak and Marhaban, Mohammad Hamiruce and Nirei, Masami (2012) Static characteristics of the double rotor switched reluctance motor. In: 2012 IEEE International Conference on Power and Energy (PECon), 2-5 Dec. 2012, Kota Kinabalu, Sabah. (pp. 402-407).

Vaithilingam, Chockalingam Aravind and Misron, Norhisam and Raja Othman, Raja Nor Firdaus Kashfi and Aris, Ishak and Marhaban, Mohammad Hamiruce and Nirei, Masami (2012) Computation of magnetic characteristics for the double rotor switched reluctance motor using flux tube analysis. In: The 2012 Asia-Pacific Symposium on Applied Electromagnetics & Mechanics , 25-27 Jul. 2012, Ho Chi Minh, Vietnam. . (Unpublished)

Vaithilingam, Chockalingam Aravind and R., Rajparthiban and R., Rajprasad and I., Grace and Teymourzadeh, Rozita and Misron, Norhisam (2012) Mathematical toolbox and its application in the development of laboratory scale vertical axis wind turbine. In: 2012 IEEE International Conference on Power and Energy (PECon), 2-5 Dec. 2012, Kota Kinabalu, Sabah. (pp. 99-104).

Wan Ishak, Wan Illia and Taip, Farah Saleena and Bejo, Siti Khairunniza and Mustapa Kamal, Siti Mazlina (2012) Volume and colour development in cake baking process. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 807-813).

Wan Ismail, Wan Ishak (2012) Agricultural mechatronic research at Universiti Putra Malaysia. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 187-194).

Yahya, Azmi and Oh, Yun Ju and Mohd Isa, Maryam and Abd Aziz, Samsuzana (2012) Portable wireless yield monitoring system for rice combine. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 442-455).

Yeo, Che Yong and Syed Mohamed, Syed Abdul Rahman Al-Haddad and Ng, Chee Kyun (2012) Dog voice identification (ID) for detection system. In: Second International Conference on Digital Information Processing and Communications (ICDIPC 2012), 10-12 July 2012, Klaipeda City, Lithuania. (pp. 120-123).

Yeo, Kwok Shien and Chow, Desmond M. and Tee, Din Chai and Wong, Wei Ru and Sandoghchi, Seyed Reza and Mahdi, Mohd Adzir and Mahamd Adikan, Faisal Rafiq (2012) Dispersion modeling of solid core photonic crystal fiber. In: 3rd International Conference on Photonics, 1-3 Oct. 2012, Penang, Malaysia. (pp. 224-226).

Yeoh, Hooi Sim and Chong, Gun Hean and Mohd Adzahan, Noranizan and Abdul Rahman, Russly and Choong, Thomas Shean Yaw (2012) A review on solubility measurement in supercritical condition. In: International Conference on Agricultural and Food Engineering for Life (Cafei2012), 26-28 Nov. 2012, Palm Garden Hotel, Putrajaya. (pp. 157-161).

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2012) Experimental investigation on surface roughness and tool wear in dry machining of TiC reinforced aluminium LM6 composite. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2012) Surface quality and chip formation in turning of LM6 aluminium alloy and particulate reinforced metal matrix composite. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Zaeri, Amir Hossein and Mohd Noor, Samsul Bahari and Mohd Isa, Maryam and Taip, Farah Saleena and Marnani, Aida Esmaeilian (2012) Disturbance rejection for a 2-DOF nonlinear helicopter model by using MIMO fuzzy sliding mode control with boundary layer. In: 3rd International Conference on Intelligent Systems Modelling and Simulation, 8-10 Feb. 2012, Kota Kinabalu, Sabah. (pp. 411-416).

Zakaria, Nor Azura and Wan Hasan, Wan Zuha and Abdul Halin, Izhal and Mohd Sidek, Roslina and Wen, Xiaoqing (2012) Fault detection with optimum March Test Algorithm. In: 3rd International Conference on Intelligent System Modelling and Simulation, 8-10 Feb. 2012, Sabah, Malaysia. (pp. 700-704).

Patent

Suraya Abdul Rashid (2012) Method and composition for making watertight cement based concrete product utilizing silica nanoparticles and rice husk ash. PI2012000678.

Luqman Chuah Abdullah (2012) Polyolefin composition. PI2010001763.

Ishak Aris (2012) Livestock management and automation system using radio waves. PI2011005990.

Thomas Choong Shean Yaw (2012) Method and composition for making mesoporous carbon coated monolith. PI2012001326.

Azni Idris (2012) A method for treatment of coloured wastewater. PI2012701199.

Mohd Adzir Mahdi (2012) A single-core fiber Mach-Zehnder interferometric comb filter. PI2012000683.

Norhisam Misron (2012) A system for evaluating ferromagnetic object and a method therefor. PI2012002705.

Abdul Rashid Mohamed Shariff (2012) A portable multi band sensor for fruit maturity detection. PI2012002702.

Abdul Rashid Mohamed Sharif (2012) A method for producing a soil nutrient map with reduced number of soil sample. PI2012000684.

Borhanuddin Mohd. Ali (2012) A dynamic method for establishing efficient and scalable rekeying algorithm in mobile WiMAX. PI2012002016.

Maryam Mohd Isa (2012) Dual sampling sigma delta analog to digital converter. PI2012700893.

Raizal Salfulnaz Muhammad Rashid (2012) An elastomeric seismic isolator. PI2012000681.

Ratnasamy Muniandy (2012) Method of manufacturing and reinforcing a plurality of asphalt and concrete structures. PI2012700894.

Ratnasamy Muniandy (2012) System and method for testing and grading construction materials. PI2012003188.

Faizal Mustapha (2012) Method and apparatus for processing and filtering wastewater for removing solid waste and FOG (fats, oils and grease) from the wastewater. PI2012700892.

Nor Kamariah Noordin (2012) A system for identifying musical notes from an audio and a method therefor. PI2012002017.

Barkawi Sahari (2012) A lightweight rear bumper with crash worthy compartment. PI2012700830.

Mohd Sapuan Salit (2012) Lumbar support system. PI2012700031.

Rosnah Shamsudin (2012) A UV pasteurization machine. PI2012003186.

Rosnah Shamsudin (2012) A mixing blade. PI2012003187.

Shamsuddin Sulaiman (2012) A self-propelled hydraulic floor crane. PI2012001330.

Shamsuddin Sulaiman (2012) Plastic made gasing top. PI2012000680.

Syed Abd. Rahman Al-Hadad Syed Mohamed (2012) A learning management system. PI2012000682.

Tey Beng Ti (2012) A method to purify recombinant nucleocapsid protein of Nipah virus using hydrophobic interaction chromatography. UNSPECIFIED.

Thesis

A.Rasid, Zainudin (2012) Improving buckling and post-buckling of shape memory alloy laminated composite plates subjected to mechanical and thermal loading using finite element method. PhD thesis, Universiti Putra Malaysia.

Abd Rahman, Mohd Firdaus (2012) Thermo-mechanical properties of kenaf-filled unplasticized polyvinyl chloride composites. Masters thesis, Universiti Putra Malaysia.

Abd Rahman, Siti Hajar (2012) Preparation and characterization of biocomposite films from kenaf-derived cellulose fibers and polylactic acid. Masters thesis, Universiti Putra Malaysia.

Abdul Hamid, Mohd Faisal (2012) Numerical assessment of coanda effect for wind turbine application. Masters thesis, Universiti Putra Malaysia.

Abdul Hanan, Umar (2012) Effect of accelerated weathering on kenaf-reinforced high density polyethylene composite. Masters thesis, Universiti Putra Malaysia.

Abdul Razak, Mohd Farhan (2012) Optimisation of solid-liquid extraction of bioactive compounds from Orthosiphon stamineus benth leaves. Masters thesis, Universiti Putra Malaysia.

Abdullah, Azhar (2012) Mechanical properties of tin mine tailing sand for greensand casting mould. PhD thesis, Universiti Putra Malaysia.

Abdulrazeg, Aeid A. (2012) Combined thermal and mechanical finite element modeling of roller-compacted concrete dam. PhD thesis, Universiti Putra Malaysia.

Abood, Manal M. (2012) Modeling river sediment deposition into The Kenyir Reservoir, Malaysia. PhD thesis, Universiti Putra Malaysia.

Abu Bakar, Muhammad Hafiz (2012) New pump delivery scheme for remotely pumped L-band erbium-doped fiber amplifier. PhD thesis, Universiti Putra Malaysia.

Abuhan, Mohd Fadhil (2012) Tracking elderly Alzheimer's patient with radio frequency localization system. Masters thesis, Universiti Putra Malaysia.

Aburkaba, Eltaher Elzarroug (2012) Effect of particle size and type on asphalt-filler mastic properties and stone mastic asphalt (SMA) performance. PhD thesis, Universiti Putra Malaysia.

Affandi, Nuraishah Bazilah (2012) Mechanical and ballistic properties of coir composite panel. Masters thesis, Universiti Putra Malaysia.

Afshari, Ali Reza (2012) Development of a fuzzy integral group model based on linguistic reasoning for project manager selection. PhD thesis, Universiti Putra Malaysia.

Agil, Halid (2012) Mitigation of rain attenuation in equatorial region for MEASAT-2 and MEASAT-3 using orbital diversity. Masters thesis, Universiti Putra Malaysia.

Ahmad, Salsabila (2012) Design and implementation of an open-loop dual-axis active solar tracking system with precision angle controller. Masters thesis, Universiti Putra Malaysia.

Ahmad Ghazali, Lizal Iswady (2012) Alternative discrete variable protocol for point to point Quantum Key Distribution system. Masters thesis, Universiti Putra Malaysia.

Ahmad Hazmi, Ahmad Syafiq (2012) Synthesis and characterization of Jatropha-based polyurethane from Jatropha-based polyol. Masters thesis, Universiti Putra Malaysia.

Ahmad Rajabi, Mohammad Rasool (2012) Determination of ideal width for exclusive motorcycle lane along the straight section of Federal Highway, Selangor, Malaysia. Masters thesis, Universiti Putra Malaysia.

Ahmadian, Sevda (2012) Sizing and analysis of pulsejet engine for unmanned aerial vehicle. Masters thesis, Universiti Putra Malaysia.

Al Juboori, Ahmad H. Rajab (2012) Production and characterization of a bioflocculant from Aspergillus flavus and its applications in water treatment. PhD thesis, Universiti Putra Malaysia.

Al-Azzawi, Alaa Khamees (2012) Error concealment technique using wavelet neural network for wireless transmitted digital images. PhD thesis, Universiti Putra Malaysia.

Al-Masri, Ahmed Naufal A. (2012) Adaptive artificial neural network for power system security assessment and control action. PhD thesis, Universiti Putra Malaysia.

Al-Musawi, Hisham K. Hisham (2012) Enhanced design of fiber grating fabry-perot laser for dense wavelength division multiplexing systems. PhD thesis, Universiti Putra Malaysia.

Al-Nuaimi, Aws Ali Shakir (2012) Efficient back-off mechanism for multimedia support in IEEE 802.11E. Masters thesis, Universiti Putra Malaysia.

Alexander, Amando (2012) Crime prevention through environmental design principles in residential areas in Abuja, Nigeria. Masters thesis, Universiti Putra Malaysia.

Alhawari, Adam Reda Hasan (2012) Design and analysis of microstrip antenna using negative index metamaterial approach. PhD thesis, Universiti Putra Malaysia.

Anvari, Alireza (2012) Development of a systematic method in lean tool selection for automotive industry. PhD thesis, Universiti Putra Malaysia.

Ariafar, Shahram (2012) Inter-cell and intra-cell facility layout models under different demand environments in cellular manufacturing systems. PhD thesis, Universiti Putra Malaysia.

Ayad, Abed Ramadhan (2012) Numerical simulation and experimental studies on the ballistic impact characteristics of ceramic/aramid hybrid composite. PhD thesis, Universiti Putra Malaysia.

Azari, Kian Ahmadi (2012) Modelling mode and parking choice behaviour under cordon pricing policy in mashhad central business district, Iran. PhD thesis, Universiti Putra Malaysia.

Azmi, Mohd Hafrizal (2012) Variable illumination compensation for pigskin leather images using local and global block analysis. Masters thesis, Universiti Putra Malaysia.

Bahurdin, Mohamad Maaroff (2012) Optimization of cutting conditions on tool life in face milling spheroidal graphite cast iron using Taguchi method. Masters thesis, Universiti Putra Malaysia.

Bakhtiari, Mohammad Reza (2012) Design, development and evaluation of a kenaf pneumatic seeding machine. Doctoral thesis, Universiti Putra Malaysia.

Buba, Sani Dahiru (2012) Reduction of earth resistance by application of chemical and natural materials. Masters thesis, Universiti Putra Malaysia.

Chan, Ken Wei (2012) Fouling deposit analysis of heat-induced pink guava puree. Masters thesis, Universiti Putra Malaysia.

Chandio, Abdul Samad (2012) Three-dimensional finite element modeling of groundwater flow and solute transport for the lower indus Basin, Pakistan. PhD thesis, Universiti Putra Malaysia.

Che Ahmad, Suhairi Rizuan (2012) Design of double stator arc type permanent magnet generator for oil palm mechanical cutter application. Masters thesis, Universiti Putra Malaysia.

Che Md Akhir, Nor Azurah (2012) Fatigue strength analysis of stone mastic asphalt (SMA) mixtures using crack meander protocol. Masters thesis, Universiti Putra Malaysia.

Cheok, Choon Yoong (2012) Extraction of total phenolic and total monomeric anthocyanin contents from mangosteen (garcinia mangostana L.) hull. PhD thesis, Universiti Putra Malaysia.

Dandi Bachtiar, (2012) Mechanical and thermal properties of short sugar palm (Arenga pinnata MERR.) fibre-reinforced high impact polystrene composites. PhD thesis, Universiti Putra Malaysia.

Dashtizadeh, Zahra (2012) Characterization of defects in unidirectional kenaf fiber-reinforced polyurethane composites using infrared thermography technique. Masters thesis, Universiti Putra Malaysia.

Elmagarhe, Asad Mohamed (2012) Oil palm kernel shell concrete mix design and bond strength. Masters thesis, Universiti Putra Malaysia.

Eslami, Alireza (2012) Development of a mathematical model for hydroclimatological drought forecasting. Doctoral thesis, Universiti Putra Malaysia.

Esmaeilian-Marnani, Aida (2012) Propagation characteristics of femtosecond soliton and development of wavelength converter and analog-to-digital converter model. PhD thesis, Universiti Putra Malaysia.

Farhad, Mesrinejad (2012) Battery aware hybrid forwarding scheme for 6lowpan. PhD thesis, Universiti Putra Malaysia.

Forooshani, Arash Abtahi (2012) On-chip communication system modeling approach for reability analysis focusing on functional failures. Masters thesis, Universiti Putra Malaysia.

Ghiasi, Vahed (2012) Effects of weak rock geomechanical properties on tunnel stability. PhD thesis, Universiti Putra Malaysia.

Gholampoor, Mohammad (2012) Optimization of operational policies for the Minab Reservoir, Southern Iran. PhD thesis, Universiti Putra Malaysia.

Ghotoorlar, Saied Mokaram (2012) Humanoid full-body motion generation based on human gait using evolutionary pareto multi-objective optimization. Masters thesis, Universiti Putra Malaysia.

Goh, Hui Wen (2012) Purification of glycolytic product from polyethylene terephthalate (pet) waste by a two-stage evaporation process. Masters thesis, Universiti Putra Malaysia.

Gunam Resul, Mohamad Faiz Mukhtar (2012) Synthesis of jatropha biolubricant using sodium methoxide as catalyst. Masters thesis, Universiti Putra Malaysia.

Haddadian, Zahra (2012) Removal of methyl orange and methylene blue from aqueous solution using dragon fruit foliage. Masters thesis, Universiti Putra Malaysia.

Hamdan, Khairunnisa (2012) Multifrequency dielectric sensing of moisture and sludge contamination in crude palm oil. Masters thesis, Universiti Putra Malaysia.

Hamedi, Maryam (2012) Development of capability-based virtual cellular manufacturing systems in dual-resource constrained settings over semi-distributed layouts. Doctoral thesis, Universiti Putra Malaysia.

Hasan, Ahmed Mudheher (2012) Improvement of an integrated global positioning system and inertial navigation system for land navigation application. Doctoral thesis, Universiti Putra Malaysia.

Hashemi, Ali (2012) Design, development and performance of a disc plough combined with rotary blades. PhD thesis, Universiti Putra Malaysia.

Hashim, Norhashila (2012) Evaluation of chilling injury symptoms in bananas using optical imaging methods. PhD thesis, Universiti Putra Malaysia.

Hedayati, Mahdi (2012) Application of robust controller in large induction motor for mitigating voltage sags. PhD thesis, Universiti Putra Malaysia.

Heri Purwanto, (2012) Comparison of vertical and continuous sterilizers in palm oil mill. Masters thesis, Universiti Putra Malaysia.

Homayouni, Seyed Mahdi (2012) Development of multi-objective optimization methods for integrated scheduling of handling equipment (AGVs, QCs, SP-AS/RS) in automated container terminals. PhD thesis, Universiti Putra Malaysia.

Husin, Nurdiyana (2012) Recovery of peptones from mixed sardine and mackerel wastes. Masters thesis, Universiti Putra Malaysia.

Hussain, Muhammad Sabir (2012) Development of minimast antenna system in base transmission station. Masters thesis, Universiti Putra Malaysia.

Ishak, Mohamad Ridzwan (2012) Enhancement of physical properties of sugar palm (arenga pinnata merr.) fibre-reinforced unsatured polyester composite via vacum resin impregnation. PhD thesis, Universiti Putra Malaysia.

Jabalamelian, Saeed (2012) Numerical analysis of shock wave propagation and AL5083 sheet bulging in explosive hydro forming process. Masters thesis, Universiti Putra Malaysia.

Jabir, Amjad Najim (2012) Efficient tree search-based detectors for multiple input multiple output wireless systems. PhD thesis, Universiti Putra Malaysia.

Jamali, Negar (2012) Factors influencing the level of electronic commerce among central Iranian SMEs. Masters thesis, Universiti Putra Malaysia.

Kamarulazizi, Sulaiman (2012) Progressive damage analysis of woven composite panels subjected to tensile loading. Masters thesis, Universiti Putra Malaysia.

Kek, Siok Peng (2012) Modelling, optimisation, and ultrasound pre-osmotic treatment of guava drying. Masters thesis, Universiti Putra Malaysia.

Kerdegari, Hamideh (2012) Pervasive human fall detection and alert system based on multilayer perceptron neural network. Masters thesis, Universiti Putra Malaysia.

Khajooei, Ehsan (2012) Attributes affecting passengers' satisfaction of public bus transport service in Kerman, Iran. Masters thesis, Universiti Putra Malaysia.

Khalit, Saiful Iskandar (2012) Development of tools for soil erosion risk mapping for Malaysian forest catchments. Doctoral thesis, Universiti Putra Malaysia.

Kohnehpooshi, Omid (2012) Nonlinear three-dimensional finite elements for composite concrete beams. PhD thesis, Universiti Putra Malaysia.

Lawal, Sani Mohammed (2012) Optimal placement and sizing of distributed generation in radial distribution networks using particle swarm optimization and forward backward sweep method. Masters thesis, Universiti Putra Malaysia.

Lim, Ann (2012) Numerical study on attitude and altitude control of multi-rotor rotorcrafts. Masters thesis, Universiti Putra Malaysia.

Lojius, Lombigit (2012) Development and characterization of readout electronics for neutron scattering instrumentation. Masters thesis, Universiti Putra Malaysia.

Lok, Chung Yee (2012) Design and development of an integrated grating and slicing machine for starchy vegetables. Masters thesis, Universiti Putra Malaysia.

M. Sayuti, (2012) Properties of titanium carbide reinforced aluminium silicon alloy matrix. PhD thesis, Universiti Putra Malaysia.

Mahdi, Izadi (2012) Evaluation of lightning return stroke current using measured electromagnetic fields. PhD thesis, Universiti Putra Malaysia.

Makinejad, Majid Davoodi (2012) Development of thermoplastic toughened hybrid kenaf/glass fibre-reinforced epoxy composite for automotive bumper beam. Doctoral thesis, Universiti Putra Malaysia.

Malekbala, Mohamad Rasool (2012) Preparation, characterization and methylene blue adsorption of surfactant-templated mesoporous carbon coated monolith. Masters thesis, Universiti Putra Malaysia.

Mat Isa, Masnita (2012) March-based diagnosis algorithm for static random-access memory stuck-at faults and transition faults. Masters thesis, Universiti Putra Malaysia.

Mat Jusoh, Suriani (2012) Determination of defects and damage modes in kenaf-reinforced epoxy composites under fatigue loading using thermal imaging and SEM techniques. Doctoral thesis, Universiti Putra Malaysia.

Mehdi, Omer Hikmat (2012) Voltage stability assessment of power systems using voltage stability indices and artificial intelligence techniques. Masters thesis, Universiti Putra Malaysia.

Mehrdad, Nikbakht Eliaderany (2012) Development of cost reduction mathematical model for natural gas transmission network system. PhD thesis, Universiti Putra Malaysia.

Mharrib, Ahmed M. (2012) Adaptive abdominal fat and liver segmentation of ct scan images for abdominal fat-fatty liver correlation. PhD thesis, Universiti Putra Malaysia.

Mhd. Adnan, Amir Syariffuddeen (2012) Chemical recycling of polyethylene terephthalate waste into BHET monomer using convection-conductive and microwave assisted glycolysis techniques. Masters thesis, Universiti Putra Malaysia.

Mileo, Vanessa Carolina Laverde (2012) Breakdown performance of backfill materials under impulse and ac voltage conditions. Masters thesis, Universiti Putra Malaysia.

Mirzaei, Majid (2012) Uncertainty analysis of extreme hydrological events in the semi-arid Zayanderood Basin, central Iran. PhD thesis, Universiti Putra Malaysia.

Moayedi, Hossein (2012) Stabilization of peat soil using electrochemical injection technique. PhD thesis, Universiti Putra Malaysia.

Mohammad Poor, Mojtaba (2012) Circular synthetic aperture radar systems for on-the-ground object detection. PhD thesis, Universiti Putra Malaysia.

Mohammady, Somayeh (2012) Peak to average power ratio reduction based on optimum phase sequence in orthogonal frequency division multiplexing systems. PhD thesis, Universiti Putra Malaysia.

Mohammed Yusuf, (2012) Removal of nickel from aqueous solution using electric arc furnace slag. Masters thesis, Universiti Putra Malaysia.

Mohd Nawi, Zawati (2012) Backflashover rate of underbuilt 33 kV distribution overhead line under lightning condition. Masters thesis, Universiti Putra Malaysia.

Mohd Nor, Mohd Zuhair (2012) Increasing resistant starch content in fish crackers through various cooking-chilling conditions. Masters thesis, Universiti Putra Malaysia.

Mohd Saad, Wira Hidayat (2012) Design of optimal wire mesh collimator for gamma camera in mapping of cancer images. Doctoral thesis, Universiti Putra Malaysia.

Mohd Salleh, Faiqa Shazeaa (2012) Compaction characteristics of Ficus Deltoidea jack extract powder. Masters thesis, Universiti Putra Malaysia.

Montakhab, Amir (2012) Flow characteristics and sediment transport in a channel with emergent flexible vegetation. PhD thesis, Universiti Putra Malaysia.

Muhamad Zam, Shahrul Fadzli (2012) Bismuth-antimony as an alternative material for high temperature lead-free solder. Masters thesis, Universiti Putra Malaysia.

Nehzati, Taravatsadat (2012) Production scheduling of reconfigurable manufacturing systems using fuzzy logic techniques. Masters thesis, Universiti Putra Malaysia.

Nematollahi, Behzad (2012) Structural behavior and environmental impact of precast ultra-high performance ductile concrete cantilever retaining walls. Masters thesis, Universiti Putra Malaysia.

Ng, Wei Lun (2012) Wireless controller area networking using token frame scheme. Masters thesis, Universiti Putra Malaysia.

Ng, Wei Shin (2012) Development of mobile magnetic imaging system based on 1-D hall sensor array. Masters thesis, Universiti Putra Malaysia.

Ngabura, Mohammed (2012) Batch and column studies on biosorption and desorption of nickel on mustard oil cake. Masters thesis, Universiti Putra Malaysia.

Nik Hadzir, Noor Hadzuin (2012) Extraction of eugenol from betel leaves (Piper betle L.) using hydrodistillation and supercritical carbon dioxide technique. Masters thesis, Universiti Putra Malaysia.

Nojabaei, Seyedehfarzaneh (2012) Development of priority oriented scheduling method to increase the efficiency and reliability for automotive job. Masters thesis, Universiti Putra Malaysia.

Odeigah, Edith Anwunli (2012) Chemical additives as cold flow improvers for palm oil and jatropha oil biodiesel. Masters thesis, Universiti Putra Malaysia.

Ohu, Rachael Bukola (2012) Flexural response of reinforced concrete beams withh embedded CFRP plates. PhD thesis, Universiti Putra Malaysia.

Pakiman, Norazrina (2012) High throughput optimization of protein-A affinity chromatography for capture of humanized monoclonal antibody. Masters thesis, Universiti Putra Malaysia.

Peyda, Mazyar (2012) Remediation of crude oil contaminated kaolin by adsorption using solid-liquid two-phase partitioning. Doctoral thesis, Universiti Putra Malaysia.

Pishgahi, Asghar (2012) Numerical investigation of laminar flow and thermal characteristics of tangential cooling air jet in a sudden expansion channel. PhD thesis, Universiti Putra Malaysia.

Pourzolfaghar, Hamed (2012) H2S adsorption from biogas using natural Clinoptilolite. Masters thesis, Universiti Putra Malaysia.

Quek, Meei Chien (2012) Optimisation of extraction methods and rheological characteristics of soursop juice. Masters thesis, Universiti Putra Malaysia.

Rashti, Kobra Tajaddodi Talab (2012) Fixed-bed drying of rice with airflow reversal for product quality and drying performance. PhD thesis, Universiti Putra Malaysia.

Roni Sahroni, Taufik (2012) Development of non linear thermal expansion model for casted aluminium silicon carbide. PhD thesis, Universiti Putra Malaysia.

Roozbahani, Mohammad Mahdi (2012) Development of computational method to determine maximum void ratio of sand-soil particles using gravitational sphere packing method. Masters thesis, Universiti Putra Malaysia.

Rosilli, Rohaizuan (2012) Bismuth-argentum alloys as alternative high temperature lead-free solder. Masters thesis, Universiti Putra Malaysia.

Sabran, Muhamad Kamal (2012) Product compliance performance of Malaysian electrical and electronics manufacturing sector. Masters thesis, Universiti Putra Malaysia.

Safarzadeh, Daryoush (2012) Design and development of a self-propelled hydraulic floor crane. PhD thesis, Universiti Putra Malaysia.

Sahib, Mouayad Abdulredha (2012) Real time nonlinear filtered-x lms algorithm for active noise control. PhD thesis, Universiti Putra Malaysia.

Saleh, Ahmed Mohammed Shamsan (2012) Energy balancing mechanisms for decentralized routing protocols in wireless sensor networks. PhD thesis, Universiti Putra Malaysia.

Salemi, Hamidreza (2012) Cropping pattern optimization for water resources allocation in Nekuabad irrigation network, Iran. Doctoral thesis, Universiti Putra Malaysia.

Saqer, Ahmad Sabri Mousa (2012) Efficient signaling schedule for centralized and distributed scheduling algorithms for wimax multi-hop relay networks. PhD thesis, Universiti Putra Malaysia.

Sarraf, Mohammad Javadian (2012) Development of passive system for high temperature wireless sensor applications. PhD thesis, Universiti Putra Malaysia.

Shariah, Sawsan Kamel (2012) Rain streak removal using emboss and spatial-temporal depth filtering technique in video keyframes. PhD thesis, Universiti Putra Malaysia.

Shavandi, Mohammad Amin (2012) Equilibrium and kinetic studies of metallic ions and residual oil removal from palm oil mill effluent using natural zeolite. Masters thesis, Universiti Putra Malaysia.

Show, Pau Loke (2012) Recovery of lipase from Burkholderia sp.using aqueous two-phase systems. PhD thesis, Universiti Putra Malaysia.

Shuib, Solehuddin (2012) Finite element method prediction of hip prosthesis in bone resorption environment. Doctoral thesis, Universiti Putra Malaysia.

Siman, Aslina (2012) Development of preliminary six sigma framework for Malaysian manufacturing company. Masters thesis, Universiti Putra Malaysia.

Sinnasamy, Yogeswaran (2012) Numerical study of two-dimensional steady incompressible laminar flow over a backward-facing step at moderate reynolds number. Masters thesis, Universiti Putra Malaysia.

Soheilirad, Mohammadsoroush (2012) Proportional-integral control optimization using imperialist competitive algorithm. Masters thesis, Universiti Putra Malaysia.

Sorooshian, Shahryar (2012) Development of a performance analysis model for small and medium enterprises in Iran. PhD thesis, Universiti Putra Malaysia.

Tung, Li Qian (2012) Modified Contrast Limited Adaptive Histogram Equalization for high dynamic range images. Masters thesis, Universiti Putra Malaysia.

Vasili, Mehdi (2012) Component procurement incorporating associated cost for make to order capicated production. Masters thesis, Universiti Putra Malaysia.

Wan Abd Malik, Wan Mohamad Khairudin (2012) Indirect field-oriented controlled of induction motor using fuzzy logic technique. Masters thesis, Universiti Putra Malaysia.

Yazdi, Seyed Ali Miratashi (2012) Speed estimation for a capacitor drive induction coil launcher. PhD thesis, Universiti Putra Malaysia.

Yousuf, Ali Gumaan El-Shekeil (2012) Properties of short kenaf fiber-reinforced thermoplastic polyurethane composites. PhD thesis, Universiti Putra Malaysia.

Zainal Abidin, Munira (2012) Effects of postharvest storage and dips in calcium salts on fresh-cut cantaloupe (Cucumis melo L. reticulates cv. Glamour). Masters thesis, Universiti Putra Malaysia.

Zare Anari, Abbas Mehdizadeh (2012) Multicast-unicast key management and data delivery method in wireless IPv6 networks. PhD thesis, Universiti Putra Malaysia.

Zarrabi, Amirreza (2012) Automatic generic process migration system in linux. Masters thesis, Universiti Putra Malaysia.

This list was generated on Mon Dec 23 23:41:03 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0