Items where Division is "Faculty of Engineering" and Year is 2024

Abas, Nurul Husniyah and Kadir, M.Z.A.A. and Azis, N. and Jasni, J. and Aziz, N.F.A. and Khurshid, Z.M. (2024) Optimizing grid with dynamic line rating of conductors: a comprehensive review. IEEE Access, 12. pp. 9738-9756. ISSN 2169-3536

Abu Bakar, N.F. and Basaruddin, B. and Naim, M. Nazli and Lenggoro, I. Wuled and Iijima, M. and Kamiya, H. (2024) Particle velocity of submicron polystyrene latex and bubble formation in aqueous system under continuous and pulsed direct current. Colloid and Polymer Science, 302 (1). pp. 129-135. ISSN 0303-402X; ESSN: 1435-1536

Ahmadipour, Masoud and Ali, Zaipatimah and Othman, Muhammad Murtadha and Bo, Rui and Javadi, Mohammad Sadegh and Ridha, Hussein Mohammed and Alrifaey, Moath (2024) A high-performance democratic political algorithm for solving multi-objective optimal power flow problem. Expert Systems with Applications, 239. art. no. 122367. pp. 1-22. ISSN 0957-4174

Aili Hamzah, Adila Fazliyana and Hamzah, Muhammad Hazwan and Che Man, Hasfalina and Jamali, Nur Syakina and Siajam, Shamsul Izhar (2024) Influence of subcritical water pretreatment temperature on pineapple waste biogas efficiency: experimental and kinetic study. Journal of Engineering and Sustainable Development, 28 (2). pp. 143-159. ISSN 2520-0917; ESSN: 2520-0925

Amir, Abd Latif and Ishak, Mohammad Ridzwan and Yidris, Noorfaizal and Mohd Zuhri, Mohamed Yusoff (2024) Flexural creep response of honeycomb sandwich pultruded GFRP composite cross-arm: obtaining full-scale viscoelastic moduli and creep coefficients. Journal of Materials Research and Technology, 29. pp. 225-241. ISSN 1022-386X; ESSN: 1681-7168

Azeem, Mohammad and Ya, Hamdan H. and Alam, Mohammad Azad and Muhammad, Masdi and M Sapuan, Salit and Kumar, Mukesh and Gemi, Lokman and Maziz, Ammar and Ismail, Ahmad Rasdan and Khan, Sanan H. (2024) Impact response of filament-wound structure with polymeric liner: Experimental and numerical investigation (Part-A). Results in Engineering, 21. art. no. 101730. pp. 1-14. ISSN 2590-1230

almahameed, Bader aldeen and Bisharah, Majdi (2024) Applying machine learning and particle swarm optimization for predictive modeling and cost optimization in construction project management. Asian Journal of Civil Engineering, 25 (2). pp. 1281-1294. ISSN 1563-0854; ESSN: 2522-011X

Chong, Michael Vui San and Mohd Tohir, Mohd Zahirasri and Saadon, Syamimi and Abu Talib, Abd Rahim (2024) Developing an enhanced thermal radiation model through a Semi-A priori approach. International Journal of Thermal Sciences, 197. art. no. 108784. pp. 1-13. ISSN 1290-0729

Dele-Afolabi, T.T. and Ahmadipour, Masoud and Azmah Hanim, M.A. and Oyekanmi, A.A. and Ansari, M.N.M. and Sikiru, Surajudeen and Kumar, Niraj (2024) Performance assessment of Sn-based lead-free solder composite joints based on extreme learning machine model tuned by Aquila optimizer. Journal of Alloys and Compounds, 970. art. no. 172684. pp. 1-14. ISSN 0925-8388; ESSN: 1873-4669

Gambo, Jibrin and Aliaa binti Roslan, Siti Nur and Mohd Shafrib, Helmi Zulhaidi and Che Ya, Nik Norasma and Yusuf, Yusuf Ahmed (2024) Unveiling groundwater potential zones as catalyst for multidimensional poverty reduction using analytical hierarchical process and geospatial decision support systems (S-DSS) approach in the semiarid region, Jigawa, Nigeria. Groundwater for Sustainable Development, 24. art. no. 101038. pp. 1-19. ISSN 2352-801X

Habibi, M. and Mobarakeh, M.N. and Chamani, A. and Abdullah, L.C. and Zamani-Ahmadmahmoodi, R. (2024) The efficiency of polyaluminum chloride and anionic polyacrylamide in removing the hot rolling steel factory effluent turbidity. International Journal of Environmental Science and Technology, 21 (2). pp. 2765-2772. ISSN 1735-1472; ESSN: 1735-2630

Hossain, Md. Showkot and Said, Nurul Ain Mohd and Abd Halim, Wahidah and Hossain, Md. Hasnat (2024) Comparing performance and complexity of TCHB and CHB multilevel inverters using NLC technique. International Journal of Power Electronics and Drive Systems, 15 (1). pp. 292-302. ISSN 2088-8694

Hussain, Haja Syed and Jamir, Mohd Ridzuan Mohd and Majid, Mohd Shukry Abdul and Rahman, Ahmad Syayuthi Abdul and Deros, Mohd Azaman Md and Sulaiman, Mohd Hafis (2024) Tribological behaviour of Furcraea Foetida fiber-reinforced epoxy composites under varying applied loads. Journal of Advanced Research in Applied Sciences and Engineering Technology, 33 (3). 98 -111. ISSN 2462- 943

Jamaludin, Nina Farhana Mohd and Abdullah, Luqman Chuah and Idrus, Syazwani and Engliman, Nurul Sakinah and Tan, Jian Ping and Jamali, Nur Syakina (2024) Nickel-iron doped on granular activated carbon for efficient immobilization in biohydrogen production. Bioresource Technology, 391 (pt.A). art. no. 129933. pp. 1-11. ISSN 0960-8524; ESSN: 1873-2976

Ji, Hong Kang and Mirzaei, Majid and Lai, Sai Hin and Dehghani, Adnan and Dehghani, Amin (2024) Implementing generative adversarial network (GAN) as a data-driven multi-site stochastic weather generator for flood frequency estimation. Environmental Modelling and Software, 172. art. no. 105896. pp. 1-14. ISSN 1364-8152; ESSN: 1873-6726

Khalid, Nurul Izzah and Ab Aziz, Norashikin and Noh, Teh Ubaidah (2024) Electrolyzed water for sanitation in meat patties factory: a case study. Journal of Food Engineering, 362. art. no. 111757. pp. 1-13. ISSN 0260-8774

Kumar, Vimal Rajan Bharatha and Othman, Mohammad Lutfi and Wahab, Noor Izzri Abdul and Hizam, Hashim Hashim Bin and Uddin, Mohammad Nasir and Razaei, Nima and Raj, Andrew Xavier and Gopalakrishnan, Shiva and Rahman, Tasmeea (2024) Adaptive DDL algorithm to elucidate the protection misoperation in Malaysian Rapid Rail DC traction system. IEEE Access, 12. pp. 10995-11009. ISSN 2169-3536

Li, Xiaoju and Abdullah, Luqman Chuah and Sobri, Shafreeza and Md Said, Mohamad Syazarudin and Hussain, Siti Aslina and Tan, Poh Aun and Jinzhao, Hu (2024) Variation characteristics and coordinated emission reduction of air pollutants in megacity of Chengdu-Chongqing economic circle under dual carbon goal. Environmental Engineering Research, 29 (4). art. no. 230475. pp. 1-19. ISSN 2005-968X; ESSN: 1226-1025

Liu, Yunyun and As’arry, Azizan and Hassan, Mohd Khair and Hairuddin, Abdul Aziz and Mohamad, Hesham (2024) Review of the grey wolf optimization algorithm: variants and applications. Neural Computing and Applications, 36 (6). pp. 2713-2735. ISSN 0941-0643; ESSN: 1433-3058

Ma, Ziwei and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Azis, Norhafiz (2024) Numerical model of lightning attachment on UHV-AC transmission lines and effects of operating voltage, phase angle, and terrain. Electric Power Systems Research, 227. art. no. 109986. pp. 1-10. ISSN 0378-7796; ESSN: 1873-2046

Mat Yazik, Muhamad Hasfanizaam and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Mazlan, Norkhairunnisa and Abu Talib, Abd Rahim and Md Shah, Ain Umaira and Safri, Syafiqah Nur Azrie (2024) Shape memory properties of epoxy with hybrid multi-walled carbon nanotube and montmorillonite nanoclay nanofiller. Polymer Bulletin, 81 (1). pp. 951-968. ISSN 0170-0839; ESSN: 1436-2449

Mohamad, Shahril and Abdullah, Luqman Chuah and Jamari, Saidatul Shima and Mohamad, Sharifah Fathiyah Sy (2024) Lignin content analysis in oil palm frond juice base medium: effect on bacterial cellulose production by Acetobacter xylinum 0416. Cellulose, 31 (3). pp. 1467-1479. ISSN 0969-0239; ESSN: 1572-882X

Mohammad, Zulhaimi and Kadoura, Ahmed Mohamed and Alkbir, M.F.M. and Kosnan, Shahrul Effendy and Safie, Sairul Izwan (2024) Establishment Lockout Tagout (LOTO) quality manual at Sri Aman Fabrication and Industrial Trading Sdn Bhd. International Journal of Intelligent Systems and Applications in Engineering, 12 (9s). pp. 128-135. ISSN 2147-6799

Mohd Zulkeple, Muhammad Fitri and Abu Talib, Abd Rahim and Harmin, Mohammad Yazdi and Saadon, Syamimi and Azami, Muhammad Hanafi and Yusaf, Talal (2024) Numerical investigation of heat transfer enhancement via dimpled target surface configuration and jet arrangement in impingement cooling. Journal of Aeronautics, Astronautics and Aviation, 56 (1). pp. 93-106. ISSN 1990-7710

Muhammad Nazri, Muhammad Nor Ikmal and Mohamad Fadhir, Nurul Qistina and Bajuri, Farid and Basri, Ernnie Ilyani and Basri, Adi Azriff (2024) Experimental study of improvised tesla micro-turbine. Journal of Aeronautics, Astronautics and Aviation, 56 (1S). pp. 461-468. ISSN 1990-7710

Natarajan, Sureshkumar and Al-Haddad, Syed Abdul Rahman and Ahmad, Faisul Arif and Hassan, Mohd Khair and Kamil, Raja and Azrad, Syaril and Macleans, June Francis (2024) Role of beamforming techniques in the future for IoT, artificial intelligence, and real time processing. In: 2024 8th International Conference on Digital Signal Processing, 23-25 Feb. 2024, Hangzhou, China. (pp. 1-6).

Oyekanmi, Abdulrahman Adeleke and Katibi, Kamil Kayode and Omar, Rohayu Che and Ahmad, Akil and Elbidi, Moammar and Alshammari, Mohammed B. and Shitu, Ibrahim Garba (2024) A novel oil palm frond magnetic biochar for the efficient adsorption of crystal violet and sunset yellow dyes from aqueous solution: synthesis, kinetics, isotherm, mechanism and reusability studies. Applied Water Science, 14 (2). art. no. 13. pp. 1-21. ISSN 2190-5487; ESSN: 2190-5495

Ramachandran, Murugan and Sundaram, Arunachalam and Ridha, Hussein Mohammed and Mirjalili, Seyedali (2024) Estimation of photovoltaic models using an enhanced Henry gas solubility optimization algorithm with first-order adaptive damping Berndt-Hall-Hall-Hausman method. Energy Conversion and Management, 299. art. no. 117831. pp. 1-25. ISSN 0196-8904; ESSN: 1879-2227

Wondi, Mohd Hafizz and Haris, Nur Izzah Nabilah and Shamsudin, Rosnah and Yunus, Robiah and Mohd Ali, Maimunah and Iswardi, Aditya Hutama (2024) Development and testing of an oil palm (Elaeis guineensis Jacq.) fruit digester process for kernel free in crude palm oil production. Industrial Crops and Products, 208. art. no. 117755. pp. 1-12. ISSN 0926-6690

Zainal, Afifi and Harun, Razif and Yahya, Liyana and Idrus, Syazwani (2024) Operational process stability in pilot dry anaerobic digester of source-sorted organic fraction municipal solid waste. Asia-Pacific Journal of Chemical Engineering. pp. 1-3. ISSN 0969-1855

Zulaikha, S.N. and Kadoura, Ahmed Mohamed and Alkbir, M.F.M. and Mohammad, Zulhaimi and Kosnan, Shahrul Effendy and Januddi, Fatihhi (2024) Surface porosity enhancement of activated carbon by synthesizing kenaf fiber. International Journal of Intelligent Systems and Applications in Engineering, 12 (spec.9). 136 -141. ISSN 2147-6799

Zulkifli, Nur Syazwani and Roslan, Siti Nur Aliaa and Mohd Shafri, Helmi Zulhaidi (2024) The effect of technology acceptance model (TAM) challenges in building information modelling (BIM) implementation in relation to Malaysian government mandate. Journal of Advanced Research in Applied Sciences and Engineering Technology, 40 (2). pp. 140-151. ISSN 2462-1943