UPM Institutional Repository

Items where Division is "Faculty of Engineering" and Year is 2022

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items: 536.

A

A Pua’at, Afifi and Zhahir, Amzari and Abdul Hamid, Mohd Faisal and Gires, Ezanee and Ahmad, Mohamed Tarmizi and Hassan, Aziz (2022) Investigation on the centre of pressure migration for different wing configurations. Journal of Aeronautics, Astronautics and Aviation, 54 (3). 261 - 272. ISSN 1990-7710

A., Aida Safina and N. L., Chin and I., Nur Akmal and M. Y., Nor Nadiah and Y., Yus Aniza (2022) A review on production, application, and toxicological analyses of nanocrystalline cellulose as a novel fat replacer food additive. Food Research, 6 (3). pp. 1-11. ISSN 2550-2166

A., N. Azaharia and M. J., M. Ridzuan and M. S., Abdul Majid and A. B., Maslinda and Cheng, E. M. and Khor, S. F. and M. T., A. Rahman and M. H., Sulaiman (2022) Dielectric, electrical conductivity, and thermal stability studies of cellulosic fibers reinforced polylactic acid composites. Journal of Natural Fibers, 19 (16). pp. 14146-14157. ISSN 1544-0478; ESSN: 1544-046X

A. W., Al-Alimi and W. A., Khaleel and S. A., Sadeq and N. A., Cholan and M. H., Al-Mansoori and Ahmed, M. H. M. and M. A., Mahdi (2022) Switchable single-double frequency multi-wavelength Brillouin Raman fiber laser based on micro-air cavity misalignment. Optics & Laser Technology, 146. art. no. 107464. pp. 1-10. ISSN 0030-3992; ESSN: 1879-2545

Abas, Ahmad Fauzi and Lau, Kuen Y. and M. Abdulkawi, Wazie and Alresheedi, Mohammed T. and Muhammad, Farah D. and Mahdi, Mohd Adzir (2022) Dispersion management and pulse characterization of graphene-based soliton mode-locked fiber lasers. Applied Sciences, 12 (7). art. no. 3288. pp. 1-13. ISSN 2076-3417

Abas, Ahmad Fauzi and Lau, Kuen Y. and Muhammad, Farah D. and Abdulkawi, Wazie M. and Al-Moliki, Yahya M. and Alresheedi, Mohammed T. and Mahdi, Mohd Adzir (2022) Dual-wavelength mode-locked oscillation with graphene nanoplatelet saturable absorber in erbium-doped fiber laser. Electronics, 11 (18). art. no. 2880. pp. 1-10. ISSN 2079-9292

Abas, Hesham Ahmed Abdul Mutleba (2022) Development of a robust intelligent controller for a semi-active car suspension system. Doctoral thesis, Universiti Putra Malaysia.

Abas, Mohd Firdaus and Singh, Balbir and Ahmad, Kamarul Arifin and Yin, Eddie Kwee Ng and Khan, Tabrej and Sebaey, Tamer A. (2022) Dwarf Kingfisher-inspired bionic flapping wing and its aerodynamic performance at lowest flight speed. Biomimetics, 7 (3). art. no. 123. pp. 1-17. ISSN 2313-7673

Abd Wafti, Nur Sulihatimarsyila and Yunus, Robiah and Lau, Harrison Lik Nang and Shean, Thomas Yaw Choong and Abd Aziz, Suraini (2022) Enzymatic synthesis of palm oil-based trimethylolpropane ester as biolubricant base stock catalyzed by Lipozyme 435. Energy, 260. art. no. 125061. pp. 1-13. ISSN 0360-5442; ESSN: 1873-6785

Abd. Kharim, Muhammad Nurfaiz and Wayayok, Aimrun and Abdullah, Ahmad Fikri and Mohamed Shariff, Abdul Rashid (2022) Variable rate inorganic foliar fertilization effect on paddy leaves chlorosis, plant growth and yield performance. Journal of Plant Nutrition, 46 (6). pp. 877-887. ISSN 0190-4167; ESSN: 1532-4087

Abd. Kharim, Muhammad Nurfaiz and Wayayok, Aimrun and Abdullah, Ahmad Fikri and Mohamed Shariff, Abdul Rashid and Mohd Husin, Ezrin and Mahadi, Muhammad Razif (2022) Predictive zoning of pest and disease infestations in rice field based on uav aerial imagery. The Egyptian Journal of Remote Sensing and Space Science, 25 (3). pp. 831-840. ISSN 1110-9823

Abdi, Mukhtar Jibril and Raffar, Nurfarhana and Zulkafli, Zed and Nurulhuda, Khairudin and Mohamed Rehan, Balqis and Muharam, Farrah Melissa and Khosim, Nor Ain and Tangang, Fredolin (2022) Index-based insurance and hydroclimatic risk management in agriculture: a systematic review of index selection and yield-index modelling methods. International Journal of Disaster Risk Reduction, 67. art. no. 102653. pp. 1-12. ISSN 2212-4209

Abdul Aziz, Ainul Husna and Engliman, Nurul Sakinah and Mansor, Mariatul Fadzillah and Mohamed Abdul, Peer and Arisht, Shalini Narayanan and Jamali, Nur Syakina and Tiang, Ming Foong (2022) Synergistic enhancement of biohydrogen production by supplementing with green synthesized magnetic iron nanoparticles using thermophilic mixed bacteria culture. International Journal of Hydrogen Energy, 47 (96). pp. 40683-40695. ISSN 0360-3199

Abdul Aziz, Nuraini and Chemani@Jumani, Muhammad Aiman and Anuari, Muhammad Safwan and Shamsuddin, Muhammad Aiman Hakimi and Mohamed Ariff, Azmah Hanim (2022) Development of in-pipe water pollution detection system focusing on pH contaminant. Pertanika Journal of Science and Technology, 30 (2). pp. 1033-1043. ISSN 0128-7680; ESSN: 2231-8526

Abdul Aziz, Nuraini and Chemani@Jumani, Muhammad Aiman and Anuari, Muhammad Safwan and Shamsuddin, Muhammad Aiman Hakimi and Mohamed Ariff, Azmah Hanim (2022) Development of in-pipe water pollution detection system focusing on pH contaminant. Pertanika Journal of Science & Technology, 30 (2). 1033 - 1043. ISSN 0128-7680; ESSN: 2231-8526

Abdul Hadi, M. A. W. and Lau, K. Y. and Mohd Yusoff, N. and Zainol Abidin, N. H. and Alresheedi, M. T. and Abas, A. F. and Goh, C. S. and Mahdi, M. A. (2022) Nano-tungsten trioxide saturable absorber for L-band noise-like pulse mode-locked fiber laser. Optical Fiber Technology, 71. art. no. 102933. pp. 1-9. ISSN 1068-5200; ESSN: 1095-9912

Abdul Hadi, Muhamad Amir Waliuddin and Muhammad, Farah Diana and Mohd Yusoff, Norita and Alresheedi, Mohammed Thamer and Goh, Chee Seong and Mahdi, Mohd Adzir (2022) Noise-like pulse generation with tungsten trioxide/polydimethylsiloxane-clad microfiber saturable absorber. Microwave and Optical Technology Letters, 64 (5). 972 - 977. ISSN 0895-2477; ESSN: 1098-2760

Abdul Hafidz, Muhamad Hazwan and Mohd Faudzi, Ahmad Athif and Norsahperi, Nor Mohd Haziq and Jamaludin, Mohd Najeb and Awang Hamid, Dayang Tiawa and Mohamaddan, Shahrol (2022) Simple neural network compact form model-free adaptive controller for thin McKibben muscle system. IEEE Access, 10. pp. 123410-123422. ISSN 2169-3536

Abdul Halim, Arinah Adila and Ariffin, Siti Hajar and Zainol@Abdullah, Wan Nor Zanariah and Azmi, Nazatul Shima (2022) Kinetic models on quality changes during heat blanching of some fruit and vegetables. Advances in Agricultural and Food Research Journal, 3 (1). pp. 1-10. ISSN 2735-1084

Abdul Halim, Noor Amirah (2022) Optimization and mathematical modeling of green solvent-mediated extraction of essential oil from Citrus hystrix DC. leaves. Doctoral thesis, Universiti Putra Malaysia.

Abdul Hamid, Mohd Faisal and Filippone, Antonio (2022) Aerodynamic modelling of flapping insect: a review. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 237 (7). pp. 1477-1492. ISSN 0954-4100; ESSN: 2041-3025

Abdul Haris, Faranadia and Ab. Kadir, Mohd Zainal Abidin and Sudin, Sukhairi and Jasni, Jasronita and Johari, Dalina and Zaini, Nur Hazirah (2022) Automated negative lightning return strokes characterization using brute-force search algorithm. Pertanika Journal of Science and Technology, 30 (2). pp. 983-1001. ISSN 0128-7680; ESSN: 2231-8526

Abdul Haris, Faranadia and Ab. Kadir, Mohd Zainal Abidin and Sudin, Sukhairi and Jasni, Jasronita and Johari, Dalina and Zaini, Nur Hazirah (2022) Automated negative lightning return strokes characterization using brute-force search algorithm. Pertanika Journal of Science & Technology, 30 (2). 983 - 1001. ISSN 0128-7680; ESSN: 2231-8526

Abdul Haris, Faranadia and Ab. Kadir, Mohd. Zainal Abidin and Jasni, Jasronita and Johari, Dalina and Muhammad Sabri, Muhammad Haziq (2022) Characteristics of negative lightning return strokes in a tropical and non-tropical region—a comparative perspective. Pertanika Journal of Science and Technology, 30 (2). pp. 913-932. ISSN 0128-7680; ESSN: 2231-8526

Abdul Manaf, Shareena Fairuz and Indera Luthfi, Abdullah Amru and Tan, Jian Ping and Mohamed Abdul, Peer and Jamali, Nur Syakina (2022) Kinetic study and model of fermentation parameters affected growth and xylitol production in bioreactor by Kluyveromyces marxianus ATCC 36,907. Biomass Conversion and Biorefinery, 13 (8). pp. 7247-7263. ISSN 2190-6815; ESSN: 2190-6823

Abdul Salim, Nooryani and Hanafi, Marsyita and Shafie, Siti Mariam and Mashohor, Syamsiah and Hashim, Norhashila (2022) Optimizing irrigation for boosting Gynura Procumbens growth in Malaysia urban area. The Indonesian Journal of Electrical Engineering and Computer Science, 26 (2). 924 - 931. ISSN 2502-4752; ESSN: 2502-4760

Abdul Shukri, Farah Syahirah and Wei, Yii Hung and Abidin, Mohd Zahid and Hashim, Norhashila and Radzuan, Mohd Nazren and Pak Dek, Mohd Sabri (2022) Sensorial characteristics of noodles incorporated with local Dabai fruit (Canarium odontophyllum) powder. Borneo Journal of Sciences & Technology, 4 (1). 65 - 69. ISSN 2672-7439

Abdulhameed, Abdullah and Abdul Halin, Izhal and Mohtar, Mohd Nazim and Hamidon, Mohd Nizar (2022) The role of the electrode geometry on the dielectrophoretic assembly of multi-walled carbon nanotube bundles from aqueous solution. Journal of Electrostatics, 116. art. no. 103694. pp. 1-12. ISSN 0304-3886; ESSN: 1873-5738

Abdulhameed, Abdullah and Halin, Izhal Abdul and Mohtar, Mohd Nazim and Hamidon, Mohd Nizar (2022) Optimization of surfactant concentration in carbon nanotube solutions for dielectrophoretic ceiling assembly and alignment: implications for transparent electronics. ACS Omega, 7 (4). 3680 - 3688. ISSN 2470-1343

Abdulkarem, Mohammed and Samsudin, Khairulmizam and A. Rasid, Mohd Fadlee and Rokhani, Fakhrul Zaman (2022) Contiki IEEE 802.15.4 MAC layer protocols: implementation and evaluation of node’s throughput and power consumption. Wireless Personal Communications, 124. pp. 2367-2390. ISSN 0929-6212; ESSN: 1572-834X

Abdullah, Mohd Na’im and Mustapha, Faizal and Ahmad, Kamarul Arifin and Mustapha, Mazlina and Khan, Tabrej and Singh, Balbir and Sebaey, Tamer A. (2022) Effect of different pre-treatment on the microstructure and intumescent properties of rice husk ash-based geopolymer hybrid coating. Polymers, 14 (11). art. no. 2252. pp. 1-18. ISSN 2073-4360

Abdullah, Norihan and Abdan, Khalina and Lee, Ching Hao and Mohd Roslim, Muhammad Huzaifah and Radzuan, Mohd Nazren and Shafi, Ayu Rafiqah (2022) Thermal properties of wood flour reinforced polyamide 6 biocomposites by twin screw extrusion. Physical Sciences Reviews, 1 (1). pp. 1-15. ISSN 2365-6581; ESSN: 2365-659X

Abdullah, Siti Nur Sharmila and Subramaniam, Kalai Arasu and Muhamad Zamani, Zahir Haizat and Sarchio, Seri Narti Edayu and Md Yasin, Faizah and Shamsi, Suhaili (2022) Biocompatibility study of curcumin-loaded Pluronic F127 nanoformulation (NanoCUR) against the embryonic development of zebrafish (Danio rerio). Molecules, 27 (14). art. no. 4493. pp. 1-17. ISSN 1420-3049

Abdullah, Sriyana and Yusof, Yus Aniza and Rukunudin, Ibni Hajar and Abdul Karim Shah, Nor Nadiah and Abdul Razak, Norawanis (2022) Infrared drying of Clinacanthus nutans leaves. Journal of Food Processing and Preservation, 46 (3). art. no. 16404. pp. 1-10. ISSN 0145-8892

Abdullah, Z. and Taip, F. S. and Mustapa Kamal, S. M. (2022) Comparative analysis of nutritional composition and droplet size of coconut milk due to dilution and emulsification. Food Research, 6 (6). 48 - 52. ISSN 2550-2166

Abdulredha, Murtada Mohammed and Hussain, Siti Aslina and Abdullah, Luqman Chuah and Tee, Lee Hong (2022) Water-in-oil emulsion stability and demulsification via surface-active compounds: a review. Journal of Petroleum Science and Engineering, 209. art. no. 109848. pp. 1-15. ISSN 0920-4105

Abotbina, Walid and Sapuan, S. M. and H. Sultan, M. T. and M Alkbir, M. F. and Ilyas, R. A. (2022) Extraction, characterization, and comparison of properties of cassava bagasse and black seed fibers. Journal of Natural Fibers, 19 (16). 14525 - 14538. ISSN 1544-0478; ESSN: 1544-046X

Abotbina, Walid and Sapuan, S. M. and Ilyas, R. A. and Sultan, M. T. H. and Alkbir, M. F. M. (2022) Preparation and characterization of black seed/cassava bagasse fiber-reinforced cornstarch-based hybrid composites. Sustainability, 14 (19). art. no. 12042. pp. 1-13. ISSN 1937-0695; ESSN: 1937-0709

Abotbina, Walid and Sapuan, S. M. and Ilyas, R. A. and Sultan, M. T. H. and Alkbir, M. F. M. and Sulaiman, S. and Harussani, M. M. and Bayraktar, Emin (2022) Recent developments in cassava (Manihot esculenta) based biocomposites and their potential industrial applications: a comprehensive review. Materials, 15 (19). art. no. 6992. pp. 1-41. ISSN 1996-1944

Abu Bakar, Mohd Hafiz and Azeman, Nur Hidayah and Mobarak, Nadhratun Naiim and Nazri, Nur Afifah Ahmad and Sulaiman, Rozita and Arsad, Norhana and Mahdi, Mohd Adzir and A Bakar, Ahmad Ashrif (2022) Succinyl-carrageenan on a localised surface plasmon resonance fiber sensor for ammonium ion assays. Journal of Materials Chemistry C, 10 (45). pp. 17258-17265. ISSN 2050-7526; ESSN: 2050-7534

Abu Bakar, Nabilah and Safiee, Nor Azizi and Mohd Nasir, Noor Azline and Abdul Rahman, Muhammad Fakhrul Radzi and Midhin, Abdulrahman Khaleel (2022) The mechanism for bond behavior of concrete with two-staged treated rubber filled steel tube. European Journal of Environmental and Civil Engineering, 27 (2). pp. 647-662. ISSN 1964-8189; ESSN: 2116-7214

Abu Hassan Shaari, Helyati and Ramli, Muhammad Mahyiddin and Abdullah, Mohd Mustafa Al Bakri and Mohtar, Mohd Nazim and Abdul Rahman, Norizah and Ahmad, Azizan and Osman, Nurul Huda and Rusydi, Febdian (2022) Effects of polymerization time towards conductivity and properties of poly(methyl methacrylate)/polyaniline (PMMA/PANi) copolymer. Sustainability, 14 (14). art. no. 8940. pp. 1-12. ISSN 2071-1050

Abu Talib, Abd. Rahim and Salman, Sadeq and Mohd Zulkeple, Muhammad Fitri and Hilo, Ali Kareem (2022) Experimental investigation of nanofluid turbulent flow over microscale backward-facing step. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 99 (2). 119 - 134. ISSN 2289-7879

Abulifa, Abdulhadi Abdulsalam (2022) Optimization and prediction of battery electric vehicle driving range using adaptive fuzzy technique. Doctoral thesis, Universiti Putra Malaysia.

Abulifa, Abdulhadi Abdulsalam and Che Soh, Azura and Hassan, Mohd Khair and Raja Ahmad, Raja Mohd Kamil and Mohd Radzi, Mohd Amran (2022) Control strategies for energy management system in electric vehicle using high-level supervisory control. International Journal of Science and Technology Research Archive, 3 (2). 37 - 44. ISSN 0799-6632

Adeyi, Abel Adekanmi and Bitrus, Nathan Kura and Abdullah, Luqman Chuah and Popoola, Lekan Taofeek and Chijioke-Okere, Maureen and Omotara, Oluwagbenga Olawale and M.Saber, Shihab Ezzuldin (2022) Effective sequestration of levofloxacin from wastewater by biochar-supported manganese dioxide composite: experimental study and modelling analyses. Environmental Engineering Research, 28 (1). art. no. 210512. pp. 1-8. ISSN 1226-1025; ESSN: 2005-968X

Afendi, Nurul Alissa and Abdul Karim Shah, Nor Nadiah (2022) Impact of UV-C assisted drying treatment on the quality of Malaysian stingless bee honey. Advances in Agricultural and Food Research Journal, 3 (2). pp. 1-14. ISSN 2735-1084

Ahmad, Afiqah and Md. Jamil, Siti Nurul Ain and Choong, Thomas S. Y. and Abdullah, Abdul Halim and Faujan, Nur Hana and Adeyi, Abel A. and Daik, Rusli and Othman, Nurhanisah (2022) Removal of cationic dyes by iron modified silica/polyurethane composite: kinetic, isotherm and thermodynamic analyses, and regeneration via advanced oxidation process. Polymers, 14 (24). art. no. 5416. pp. 1-23. ISSN 2073-4360

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle and Anak Lukista, Debby Dyne and Irianto and Ghazali, Ihwan (2022) Application of Taguchi method to optimize the parameter of Fused Deposition Modeling (FDM) using oil palm fiber reinforced thermoplastic composites. Polymers, 14 (11). art. no. 2140. pp. 1-15. ISSN 2073-4360

Ahmad, Siti Anom and Hui, Foh Foong and Abdullah, Siti Farra Zillah and Chai, Sen Tyng and Ibrahim, Rahimah and Syed Abdul Rashid, Sharifah Norazizan and Ismail, Sumarni and Hamid, Tengku Aizan (2022) Baseline assessment of age-friendliness for Taiping. Malaysian Journal of Medicine and Health Sciences, 18 (suppl. 20). 85 - 86. ISSN 2636-9346

Ahmad Faris, Ahmad Fariduddin and Basri, Adi Azriff and Basri, Ernnie Illyani and Hameed Sultan, Mohammed Thariq and Ahmad, Kamarul Arifin (2022) Aerodynamics effects of APC slow flyer propeller blade design with different airfoil origin positions. Journal of Aeronautics, Astronautics and Aviation, 54 (3). pp. 325-334. ISSN 1990-7710

Ahmad Habibillah, Nadia Hanani and Ismail, Nur Hidayah and Romli, Fairuz Izzudin (2022) Influence of seat pitch and body anthropometry parameters on aircraft passengers' seating comfort. Journal of Aeronautics, Astronautics and Aviation, 54 (3). 241 - 250. ISSN 1990-7710

Ahmad Habibillah, Nadia Hanani and Romli, Fairuz Izzuddin (2022) Anthropometric measurements of Malaysian population for passenger cabin design of transport aircraft. Journal of Mechanical Engineering, 19 (1). art. no. 7. 99 - 112. ISSN 1823-5514; ESSN 2550-164X

Ahmad Kamaroddin, Mohd Fadhzir (2022) High-temperature electrolysis of copper chloride using hybrid proton exchange membrane for hydrogen production. Doctoral thesis, Universiti Putra Malaysia.

Ahmad Nadzri, Seri Nur Zumaimi and Md Shah, Ain Umaira and Hameed Sultan, Mohamed Thariq and Safri, Syafiqah Nur Azrie and Shahar, Farah Syazwani and Basri, Adi Azriff (2022) Failure mechanisms of kenaf/glass sandwich laminates subjected to low velocity impact loading. Journal of Industrial Textiles, 51 (3). 4167 - 4183. ISSN 1528-0837; ESSN: 1530-8057

Ahmad Naim, Nabilah Aliyah and Omar, Rozita and Nik Ibrahim, Nik Nor Liyana (2022) Emergency preparedness and response in palm oil mill and investigation of the employees' emergency preparedness knowledge and attitude. Process Safety Progress, 41 (spec.1). 75 - 83. ISSN 1066-8527; ESSN: 1547-5913

Ahmad Nazri, Nur Asyikin and Azis, Raba’ah Syahidah and Che Man, Hasfalina and Ismail, Ismayadi (2022) Preparation of extracted magnetite from an industrial waste mill modified by cetyl trimethyl ammonium bromide for cadmium ion removal from aqueous solution. Malaysian Journal of Analytical Sciences, 26 (2). pp. 334-336. ISSN 1394-2506

Ahmad Shapi’i, Ruzanna and Othman, Siti Hajar and Kadir Basha, Roseliza and Naim, Mohd Nazli (2022) Mechanical, thermal, and barrier properties of starch films incorporated with chitosan nanoparticles. Nanotechnology Reviews, 11 (1). 1464 - 1477. ISSN 2191-9089; ESSN: 2191-9097

Ahmed, Hesham and As’arry, Azizan and Hairuddin, Abdul Aziz and Hassan, Mohd Khair and Liu, Yunyun and Onwudinjo, Erasmus Cufe Ujunwa (2022) Online DE optimization for Fuzzy-PID controller of semi-active suspension system featuring MR damper. IEEE Access, 10. 129125 - 129138. ISSN 2169-3536

Ahmed, M. H. M. and Mohd Yusoff, N. and Zainol Abidin, N. H. H. and Lee, H. K. and Alresheedi, M. T. and Abas, A. F. and Goh, C. S. and Mahdi, M.A. (2022) Ultrashort pulse thulium-doped fiber laser with molybdenum trioxide on tapered fiber. Optik, 257. art. no. 168736. pp. 1-11. ISSN 0030-4026; ESSN: 1618-1336

Ahmed AL-Kubaisi, Mohammed and Shafri, Helmi Zulhaidi Mohd and Ismail, Mohd Hasmadi and Yusof, Mohd Johari Mohd and Hashim, Shaiful Jahari (2022) Hyperspectral image classification by integrating attention-based LSTM and hybrid spectral networks. International Journal of Remote Sensing, 43 (1). 3450 - 3469. ISSN 0143-1161; ESSN: 1366-5901

Aili Hamzah, A. F. and Hamzah, M. H. and Mazlan, N. I. and Che Man, H. and Jamali, N. S. and Siajam, S. I. and Show, P. L. (2022) Optimization of subcritical water pre-treatment for biogas enhancement on co-digestion of pineapple waste and cow dung using the response surface methodology. Waste Management, 150. 98 - 109. ISSN 0956-053X; ESSN: 1879-2456

Aili Hamzah, Adila Fazliyana (2022) Enhancement of biogas production in anaerobic co-digestion of subcritical water pre-treated with pineapple waste and cow dung. Masters thesis, Universiti Putra Malaysia.

Aili Hamzah, Adila Fazliyana and Hamzah, Muhammad Hazwan and Che Man, Hasfalina and Jamali, Nur Syakina and Siajam, Shamsul Izhar and Pau, Loke Show (2022) Biogas production through mono- and co-digestion of pineapple waste and cow dung at different substrate ratios. BioEnergy Research. ISSN 1939-1234; ESSN: 1939-1242

Aiza Jaafar, C. N. and Zainol, I. and Izyan Khairani, M. I. and Dele-Afolabi, T. T. (2022) Physical and mechanical properties of tilapia scale hydroxyapatite-filled high-density polyethylene composites. Polymers, 14 (2). art. no. 251. pp. 1-17. ISSN 2073-4360

Al Sumarmad, Khaizaran Abdulhussein and Sulaiman, Nasri and Abdul Wahab, Noor Izzri and Hizam, Hashim (2022) Energy management and voltage control in microgrids using artificial neural networks, PID, and fuzzy logic controllers. Energies, 15 (1). art. no. 303. pp. 1-22. ISSN 1996-1073

Al Sumarmad, Khaizaran Abdulhussein and Sulaiman, Nasri and Abdul Wahab, Noor Izzri and Hizam, Hashim (2022) Microgrid energy management system based on fuzzy logic and monitoring platform for data analysis. Energies, 15 (11). art. no. 4125. pp. 1-29. ISSN 1996-1073

Al-Alimi, Abdulmoghni Ali Wazea and Cholan, Noran Azizan and Shee, Yu Gang and Alresheedi, Mohammed Thamer and Goh, Chee Seong and Mahdi, Mohd Adzir (2022) Ultralong wavelength operation of a tunable multiwavelength Brillouin-Raman fiber laser in 1.65 μm band. Results in Physics, 37. art. no. 105469. pp. 1-7. ISSN 2211-3797

Al-Ghazali, Noor Abbas and Abd. Aziz, Farah Nora Aznieta and Abdan, Khalina and Mohd. Nasir, Noor Azline (2022) Mechanical properties of natural fibre reinforced geopolymer composites: a review. Pertanika Journal of Science & Technology, 30 (3). pp. 2053-2069. ISSN 0128-7680; ESSN: 2231-8526

Al-Ghazali, Noor Abbas and Abdul Aziz, Farah Nora Aznieta and Abdan, Khalina and Mohd Nasir, Noor Azline (2022) Mechanical properties of natural fibre reinforced geopolymer composite: a review. Pertanika Journal of Science and Technology, 30 (3). 2053 - 2069. ISSN 0128-7680; ESSN: 2231-8526

Al-Hchaimi, Ahmed Abbas Jasim and Sulaiman, Nasri and Mustafa, Mohd Amrallah and Mohtar, Mohd Nazim and Mohd Hassan, Siti Lailatul and Muhsen, Yousif Raad (2022) Evaluation approach for efficient countermeasure techniques against denial-of-service attack on MPSoC-based IoT using multi-criteria decision-making. IEEE Access, 11. pp. 89-106. ISSN 2169-3536

Al-Hilphy, Asaad Rehman and K. Ahmed, Abdul Hadi and Gavahian, Mohsen and Chen, Ho Hsien and Chemat, Farid and Al-Behadli, Thamer-K.M. and Mohd Nor, Mohd Zuhair and Ahmad, So'bah (2022) Solar energy-based extraction of essential oils from cloves, cinnamon, orange, lemon, eucalyptus, and cardamom: a clean energy technology for green extraction. Journal of Food Process Engineering, 45 (6). pp. 1-13. ISSN 0145-8876; ESSN: 1745-4530

Al-Jumaily, Abdulmajeed and Sali, Aduwati and Jimenez, Victor P. Gil and Fontan, Fernando Perez and Jit Singh, Mandeep and Ismail, Alyani (2022) Evaluation of 5G coexistence and interference signals in the C-Band satellite earth station. IEEE Transactions on Vehicular Technology, 71 (6). pp. 6189-6200. ISSN 0018-9545; ESSN: 1939-9359

Al-Sabari, Ali Mohsen Mohsen (2022) Fuzzy-PI based hybrid energy storage system topology for electric vehicles. Doctoral thesis, Universiti Putra Malaysia.

Al-Zubaidi, Razi and Mohd Ariffin, Mohd Khairol Anuar and Abdulsamad, Akram and Raqee, Ali and Ismail, Mohd Idris Shah and Ahmad, Kamarul Arifin (2022) The effect of self-efficacy on sustainable development: the PetroMasila in Yemen. Advances in Social Sciences Research Journal, 9 (12). 35 - 49. ISSN 2055-0286

Al-deen Alyozbaky, Omar Sharaf and Ab Kadir, Mohd Zainal Abidin (2022) Influence of non-sinusoidal power supply on the performance of a single-phase capacitor induction motor. Indonesian Journal of Electrical Engineering and Computer Science, 25 (3). 1246 - 1257. ISSN 2502-4752; ESSN: 2502-4760

Al-sarafi, Ali Hamoud Mssoud and Alias, Aidi Hizami and Mohd. Shafri, Helmi Zulhaidi and Mohd. Jakarni, Fauzan (2022) Factors affecting BIM adoption in the Yemeni construction industry: a structural equation modelling approach. Buildings, 12 (12). art. no. 2066. pp. 1-31. ISSN 2075-5309

Aladwani, Habeeb A. H. R. and Ariffin, Mohd Khairol Anuar and Mustapha, Faizal (2022) A supervised machine-learning method for optimizing the automatic transmission system of wind turbines. Engineering Solid Mechanics, 10 (1). 35 - 56. ISSN 2291-8744; ESSN: 2291-8752

Alajmi, Mohammad Sh Gh M M (2022) Design of a hybrid wind -solar generator using a vertical axis wind turbine structure with rotating photovoltaic cells. Doctoral thesis, Universiti Putra Malaysia.

Alajmi, Shaea and Abdul Halin, Izhal and Mustapha, Faizal and Supeni, Eris Elianddy and Ibrahim, Irwan (2022) Simulation of low voltage dc-dc booster circuit with improved switch for amplification of biophotovoltaic cell output voltage. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2). 124 - 134. ISSN 2289-7879

Alam, Mohammad Azad and Ya, Hamdan H. and Mohammad Azeem and Mohammad Yusuf and Soomro, Imtiaz Ali and Masood, Faisal and Shozib, Imtiaz Ahmed and Salit, M. Sapuan and Akhter, Javed (2022) Artificial neural network modeling to predict the effect of milling time and tic content on the crystallite size and lattice strain of Al7075-TiC composites fabricated by powder metallurgy. Crystals, 12 (3). art. no. 372. pp. 1-20. ISSN 2073-4352

Alazemi, Mohammad F. F. S. and Ariffin, Mohd Khairol Anuar and Abdullah, Mohd Na'im and Supeni, Eris Elianddy and Abdul Aziz, Faieza (2022) Evaluation of the effects of soda-lime-silica glass with rice husk ash as an additive on the hardness behavior. Engineering Solid Mechanics, 10 (2). 113 - 120. ISSN 2291-8744; ESSN: 2291-8752

Albogamy, Fahad R. and Aiyashi, M. A. and Hashim, Fazirul Hisyam and Imran Khan and Choi, Bong Jun (2022) Optimal resource allocation for NOMA wireless networks. Computers, Materials & Continua, 74 (2). 3249 - 3261. ISSN 1546-2218; ESSN: 1546-2226

Aldabbagh, Yasir Abdulameer Nayyef and Mohd Shafri, Helmi Zulhaidi and Mansor, Shattri and Ismail, Mohd Hasmadi (2022) Desertification prediction with an integrated 3D convolutional neural network and cellular automata in Al-Muthanna, Iraq. Environmental Monitoring and Assessment, 194. art. no. 715. pp. 1-20. ISSN 0167-6369; ESSN: 1573-2959

Alghrairi, Mokhalad and Sulaiman, Nasri and Wan Hasan, Wan Zuha and Jaafar, Haslina and Mutashar, Saad (2022) Analysis of four coils by inductive powering links for powering bio-implantable sensor. TEM Journal: Technology, Education, Management, Informatics, 11 (3). pp. 1352-1356. ISSN 2217-8309; ESSN: 2217-8333

Alghrairi, Mokhalad and Sulaiman, Nasri and Wan Hasan, Wan Zuha and Jaafar, Haslina and Mutashar, Saad (2022) Design a wireless pressure sensor with an ellipse and a circular shape to monitor the pressure within the coronary artery. IEEE Access, 10. 92158 - 92165. ISSN 2169-3536

Algriree, Waleed and Sulaiman, Nasri and Isa, Maryam and Sahbudin, Ratna K. Z. and Hassan, Siti L. M. and Hmood Salman, Emad and Alghrairi, Mokhalad (2022) An analysis of low complexity of 5G-MIMO communication system based CR using hybrid filter detection. Alexandria Engineering Journal, 65. pp. 627-648. ISSN 1110-0168; ESSN: 2090-2670

Algriree, Waleed and Sulaiman, Nasri and M. Isa, Maryam and Sahbudin, Ratna K. Z. and Hassan, Siti L. M. and Salman, Emad Hmood (2022) On the performance of various 5G signals sensing based on hybrid filter. International Journal of Wireless Information Networks, 30. pp. 42-57. ISSN 1068-9605; ESSN: 1572-8129

Alhamada, T. F and M. A., Azmah Hanim and Jung, D. W. and R., Saidur and A., Nuraini and Wan Hasan, W. Z. (2022) MXene based nanocomposites for recent solar energy technologies. Nanomaterials, 12 (20). art. no. 3666. pp. 1-15. ISSN 2079-4991

Ali, Basheer Husham and Sulaiman, Nasri and Al-Haddad, S. A. R. and Atan, Rodziah and Mohd Hassan, Siti Lailatul (2022) DDoS detection using active and idle features of revised CICFlowMeter and statistical approaches. In: 2022 Fourth International Conference on Advanced Science and Engineering (4th ICOASE), 21-22 Sept. 2022, Zakho - Duhok, Kurdistan Region, Iraq. (pp. 148-153).

Ali, Omar and Ab Razak, Mohd Shahrizal (2022) Prediction of shoreline change using a new long-term shoreline evolution model based on the concept of sediment balance. Jurnal teknologi, 84 (5). pp. 1-10. ISSN 2180-3722,0127-9696

Ali, Rabiatul Adawiyah and Nik Ibrahim, Nik Nor Liyana and Wan Abdul Karim Ghani, Wan Azlina and Sani, Nor Samsiah and Hon, Loong Lam (2022) A hybrid P-graph and WEKA approach in decision-making: waste conversion technologies selection. Journal of Applied Science and Engineering, 26 (2). pp. 261-267. ISSN 2708-9967; ESSN: 2708-9975

Ali, S,H and M. Hafriz, R.S.R and Shamsuddin, A. H. and Salmiaton, A. (2022) Production of liquid biofuel from sludge palm oil (SPO) using heterogeneous catalytic pyrolysis. Journal of Applied Science and Engineering, 26 (4). pp. 529-538. ISSN 2708-9967; EISSN: 2708-9975

Aliyu, Sabo (2022) Neuro-fuzzy logic-based power system stabilizers for angle stability enhancement in multi-machine power systems. Doctoral thesis, Universiti Putra Malaysia.

Almansi, Khaled Y. M. (2022) Assessment of suitable hospital location using GIS and machine learning. Doctoral thesis, Universiti Putra Malaysia.

Almansi, Khaled Yousef and Mohamed Shariff, Abdul Rashid and Kalantar, Bahareh and Abdullah, Ahmad Fikri and Syed Ismail, Sharifah Norkhadijah and Ueda, Naonori (2022) Performance evaluation of hospital site suitability using multilayer perceptron MLP and analytical hierarchy process AHP models in Malacca, Malaysia. Sustainability, 14 (7). art. no. 3731. pp. 1-36. ISSN 1937-0695; ESSN: 1937-0709

Alnassar, Ghusoon and Mohammed, Husam Abduldaem and Taiwo, Ambali and Ahmad Anas, Siti Barirah and Mokhtar, Makhfudzah (2022) Deployment of multiservice code in FSO-based hybrid subcarrier system. Journal of Optical Communications. pp. 1-4. ISSN 2191-6322

Alotaibi, Alowaid and Muda, Mohd Khairul Hafiz and Mustapha, Faizal and Abdul Halin, Izhal and Yidris, Noorfaizal (2022) Perpetual motion wind turbine generator for novelty energy harvesting system; conceptual design approach. Journal of advanced research in fluid mechanics and thermal sciences, 94 (2). pp. 166-173. ISSN 2289-7879

Alrashidi, Ahmed M. R. N. and Adam, Nor Mariah and Mohd Ariffin, Mohd Khairol Anuar and Fnyees, Alajmi and Naser, Alrashidi and Abdul Aziz, Hairuddin (2022) Impact of plasma combustion technology on micro gas turbines using biodiesel fuels. Applied Sciences, 12 (9). art. no. 4321. pp. 1-21. ISSN 2076-3417

Alrubaye, Yasir L. and Yusuf, Badronnisa and Mohammad, Thamer A. and Nahazanan, Haslinda and Mohamed Zawawi, Mohamed Azwan (2022) Experimental and numerical prediction of wetting fronts size created by sub-surface bubble irrigation system. Sustainability, 14 (18). art. no. 11492. pp. 1-21. ISSN 2071-1050

Alsayed, Abdallah and Aqel, Mohammad O. A. and Kamil, Raja and Sadir, Hayder and Abuzaiter, Alaa and Alezabi, Kamal Ali and Sari, Hasan (2022) Optimization-based method for estimating the transmission rate of COVID-19 during the lockdown in Malaysia. Journal of Engineering Science and Technology, 17 (4). 2287 - 2298. ISSN 1823-4690

Alsultan, G. Abdulkareem and Mijan, N. Asikin and Obeas, Laith K. and Yunus, Robiah and Razali, Siti Zulaika and Islam, Aminul and Yap, Taufiq Yun Hin (2022) In-situ operando and ex-situ study on light hydrocarbon-like-diesel and catalyst deactivation kinetic and mechanism study during deoxygenation of sludge oil. Chemical Engineering Journal, 429. art. no. 132206. pp. 1-15. ISSN 1385-8947; ESSN: 1873-3212

Altarazi, Yazan S. M. and Abu Talib, Abd Rahim and Yu, Jianglong and Gires, Ezanee and Abdul Ghafir, Mohd Fahmi and Lucas, John and Yusaf, Talal (2022) Effects of biofuel on engines performance and emission characteristics: a review. Energy, 238 (pt.C). art. no. 121910. pp. 1-20. ISSN 0360-5442; ESSN: 1873-6785

Altarazi, Yazan S. M. and Abu Talib, Abd. Rahim and Yu, Jianglong and Gires, Ezanee and Abdul Ghafir, Mohd Fahmi and Lucas, John and Yusaf, Talal (2022) Simulating aero-engine performance and emissions characteristics running on green diesel. International Journal of Green Energy, 20 (4). pp. 1-7. ISSN 1543-5083

Altarazi, Yazan S.M. and Abu Talib, Abd Rahim and Yusaf, Talal and Yu, Jianglong and Gires, Ezanee and Abdul Ghafir, Mohd Fahmi and Lucas, John (2022) A review of engine performance and emissions using single and dual biodiesel fuels: research paths, challenges, motivations and recommendations. Fuel, 326. art. no. 125072. pp. 1-19. ISSN 0016-2361

Amat Sairin, Masyitah and Abd Aziz, Samsuzana and Chan, Yoke Mun and Khaled, Alfadhl Yahya and Rokhani, Fakhrul Zaman (2022) Analysis and prediction of the major fatty acids in vegetable oils using dielectric spectroscopy at 5–30 MHz. PLOS One, 17 (5). art. no. 268827. pp. 1-14. ISSN 1932-6203

Amerhaider Nuar, Nurul Nazihah and Md. Jamil, Siti Nurul Ain and Li, Fan and Mat Azmi, Intan Diana and Chiang, Pen Chi and Shean, Thomas Yaw Choong (2022) Synthesis of controlled-release calcium peroxide nanoparticles coated with dextran for removal of doxycycline from aqueous system. Polymers, 14 (18). art. no. 3866. pp. 1-18. ISSN 2073-4360

Amran, Mugahed and Abdelgader, Hakim S. and Onaizi, Ali M. and Fediuk, Roman and Ozbakkaloglu, Togay and Rashid, Raizal S.M. and Murali, G. (2022) 3D-printable alkali-activated concretes for building applications: a critical review. Construction and Building Materials, 319 (126126). pp. 1-24. ISSN 0950-0618; ESSN: 1879-0526

Amran, Mugahed and Huang, Shan-Shan and Debbarma, Solomon and M. Rashid, Raizal S. (2022) Fire resistance of geopolymer concrete: a critical review. Construction and Building Materials, 324. art. no. 126722. pp. 1-26. ISSN 0950-0618

Amran, Mugahed and Lesovik, Valery and Tolstoy, Aleksandr and Fediuk, Roman and Rusinov, Roman and Rusinova, Nadezhda and Qader, Diyar N. and Mohammed, Kachalla and Rashid, Raizal S.m. (2022) Properties and performance of polypropylene fibered high-strength concrete with an improved composite binders. Case Studies in Construction Materials, 17. art. no. e01621. pp. 1-21. ISSN 2214-5095

Amran, Mugahed and Onaizi, Ali M. and Fediuk, Roman and Vatin, Nikolai Ivanovicn and Muhammad Rashid, Raizal Saifulnaz and Abdelgader, Hakim and Ozbakkaloglu, Togay (2022) Self-healing concrete as a prospective construction material: a review. Materials, 15 (9). art. no. 3214. pp. 1-46. ISSN 1996-1944

Ansari, Anwaar Hazoor and Mohd Jakarni, Fauzan and Muniandy, Ratnasamy and Hassim, Salihudin and Elahi, Zafreen and Zair, Mohamed Meftah Ben (2022) Effect of cup lump rubber as a sustainable bio-modifier on the properties of bitumen incorporating polyphosphoric acid. Construction and Building Materials, 323. art. no. 126505. pp. 1-16. ISSN 0950-0618; ESSN: 1879-0526

Antar, Antar Ahmed and Alsofiany, Asem Abdulqawi and Harun, Mohd Yusof (2022) Optimisation the removal of Fe (II) ions from wastewater using clay- alginate composite beads. Journal of Applied Science and Engineering, 26 (4). 475 - 484. ISSN 2708-9967; ESSN: 2708-9975

Aridi, Aida Safina and Yusof, Yus Aniza and Chin, Nyuk Ling and Ishak, Nur Akmal and Mohammad Yusof, Nor Nadiah (2022) Isolation of cellulose from mature pods and how different bleaching agents affect its characterization. Materials Performance and Characterization, 11 (1). 236 - 243. ISSN 2379-1365; ESSN: 2165-3992

Ariffin, Mohd Ruzaimi and Shafie, Suhaidi and Wan Hasan, Wan Zuha and Azis, Norhafiz and Yaacob, Mohammad Effendy and Supeni, Eris Elianddy (2022) Development of stand-alone DC energy datalogger for off- grid PV system application based on microcontroller. Pertanika Journal of Science & Technology, 30 (1). art. no. 10. 185 - 199. ISSN 0128-7680; ESSN: 2231-8526

Arumugam, Soundhar and Kandasamy, Jayakrishna and Venkatesan, Subramani and Murugan, Rajesh and Narayanan, Valayapathy Lakshmi and Hameed Sultan, Mohamed Thariq and Shahar, Farah Syazwani and Md Shah, Ain Umaira and Khan, Tabrej and Sebaey, Tamer Ali (2022) A review on the effect of fabric reinforcement on strength enhancement of natural fiber composites. Materials, 15 (9). art. no. 3025. pp. 1-33. ISSN 1996-1944

Arumugam, Veknesh and Ismail, Muhammad Heikal and Puspadaran, Tharsini Amma and Routray, Winny and Ngadisih, Ngadisih and Karyadi, Joko Nugroho Wahyu and Suwignyo, Bambang and Suryatmojo, Hatma (2022) Food waste treatment methods and its effects on the growth quality of plants: a review. Pertanika Journal of Tropical Agricultural Science, 45 (1). pp. 75-101. ISSN 1511-3701; ESSN: 2231-8542

Arumugam, Veknesh and Ismail, Muhammad Heikal and Puspadaran, Tharsini Amma and Routray, Winny and Ngadisih, Ngadisih and Karyadi, Joko Nugroho Wahyu and Suwignyo, Bambang and Suryatmojo, Hatma (2022) Food waste treatment methods and its effects on the growth quality of plants: a review. Pertanika Journal of Tropical Agricultural Science, 45 (1). pp. 75-101. ISSN 1511-3701; ESSN: 2231-8542

Arunasalam, Mageswaran and Leman, Zulkiflle and Baharudin, B. T. Hang Tuah and Sulaiman, Shamsuddin and Das, Charles Santhakumar Anthony (2022) Challenges in minimizing copper dissolution for lead free wave soldering in surface mount technology going towards green manufacturing. International Journal of Precision Engineering and Manufacturing-Green Technology, 9. 645 - 660. ISSN 2288-6206; ESSN: 2198-0810

Ashraf, Waqas (2022) Mechanical properties of hybrid honeycomb sandwich structure having facesheets reinforced with flax, kenaf and glass fibers. Doctoral thesis, Universiti Putra Malaysia.

Ashrafi, Negin and Mohamed Ariff, Azmah Hanim and Jung, Dong Won and Sarraf, Masoud and Foroughi, Javad and Sulaiman, Shamsuddin and Hong, Tang Sai (2022) Magnetic, electrical, and physical properties evolution in Fe3O4 nanofiller reinforced aluminium matrix composite produced by powder metallurgy method. Materials, 15 (12). art. no. 4153. pp. 1-22. ISSN 1996-1944

Aslam, Sohaib and Yew, Chung Chak and Jaffery, Mujtaba Hussain and Varatharajoo, Renuganth (2022) The fuzzy PD control for combined energy and attitude control system. Aircraft Engineering and Aerospace Technology, 94 (10). 1806 - 1824. ISSN 0002-2667

Asman, Saidatul Habsah and Zainul Abidin, Aidil Azwin and Mohd Ngah, Nurul Ainatul Rahmah and Ab Aziz, Nur Fadilah and Ab. Kadir, Mohd Zainal and Ahmad Mustafa, Nur Badariah and Leong, Yeng Weng (2022) Study on the electrical equivalent circuit model of lightning fault cause in power grid system. In: 2022 IEEE International Conference on Power Systems Technology (POWERCON), 12-14 Sept. 2022, Kuala Lumpur, Malaysia. .

Asmawi, Nazrin and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Mohamed Amin Tawakkal, Intan Syafinaz and Rushdan, Ahmad Ilyas (2022) Flammability and physical stability of sugar palm crystalline nanocellulose reinforced thermoplastic sugar palm starch/poly(lactic acid) blend bionanocomposites. Nanotechnology Reviews, 11 (1). 86 - 95. ISSN 2191-9089; ESSN: 2191-9097

Asyraf, M. R. M. and Ishak, M. R. and Syamsir, Agusril and Amir, A. L. and Nurazzi, N. M. and Norrrahim, M. N. F. and Asrofi, Mochamad and Rafidah, M. and Ilyas, R. A. and Rashid, Mohamad Zakir Abd and Razman, M. R. (2022) Filament-wound glass-fibre reinforced polymer composites: Potential applications for cross arm structure in transmission towers. Polymer Bulletin, 80 (2). pp. 1059-1084. ISSN 0170-0839; ESSN: 1436-2449

Asyraf, Muhammad Rizal Muhammad and Ishak, Mohamad Ridzwan and Norrrahim, Mohd Nor Faiz and Amir, Abdul Latif and Nurazzi, Norizan Mohd and Ilyas, Rushdan Ahmad and Asrofi, Mochamad and Rafidah, Mazlan and Razman, Muhammad Rizal (2022) Potential of flax fiber reinforced biopolymer composites for cross-arm application in transmission tower: a review. Fibers and Polymers, 23 (4). pp. 853-877. ISSN 1229-9197; ESSN: 1875-0052

Azaman, Mohd Ikmal Hafizi and Ramli, Ahmad Syazwan and Mdradzi, Mohd Khairul Fadzly and Ahmad, Mohd Rizal and Mohd Khalid, Mohd Ramdhan and Mohd Bakri, Mohd Azwan and Mustapha Kamil, Yasmin and Mahdi, Mohd Adzir (2022) Feasibility study of oil palm harvesting using pulse fibre laser system with different lenses. Journal of Oil Palm Research, 34 (3). 488 - 496. ISSN 1511-2780

Azarnia, A. and Sahbudin, R. K. Z. and Adzir, M. and Anas, S. B. A. (2022) Compensation of the nonlinear impairments in all-optical OFDM systems based on the optical phase conjugation (OPC) module. International Journal on Advanced Science, Engineering and Information Technology (IJASEIT), 12 (1). 180 - 186. ISSN 2088-5334; ESSN : 2460-6952

Azeez, Kafel and Abu Talib, Abd Rahim and Ahmed, Riyadh Ibraheem (2022) Heat transfer enhancement for corrugated facing step channels using aluminium nitride nanofluid - numerical investigation. Journal of Thermal Engineering, 8 (6). 734 - 747. ISSN 2148-7847

Azeez, Omer Saud and M. Shafri, Helmi Z. and Alias, Aidi Hizami and Haron, Nuzul A. (2022) Integration of object-based image analysis and convolutional neural network for the classification of high-resolution satellite image: a comparative assessment. Applied Sciences, 12 (21). art. no. 10890. pp. 1-21. ISSN 2076-3417

Azeez, Omer Saud and M. Shafri, Helmi Z. and Alias, Aidi Hizami and Haron, Nuzul Azam (2022) A joint Bayesian optimization for the classification of fine spatial resolution remotely sensed imagery using object-based convolutional neural networks. Land, 11 (11). art. no. 1905. pp. 1-30. ISSN 2073-445X

Aziz, Mohd Azrul and Chee, Fui Wong and Haron, Nuzul Azam and Ales @ Alias, Aidi Hizami and Raja Ahmad Effendi, Raja Ahmad Azmeer and Ooi, Kuan Tan (2022) Critical success factors for building information modelling BIM implementation for power plant projects in Malaysia. IIUM Engineering Journal, 23 (1). 34 - 45. ISSN 1511-788X; ESSN: 2289-7860

Azizi, Muhammad Azim and Mohd Ridhuan, Mohd Faiz and Mohd Zahari, Mohd Zakiyuddin and Abdul Rahim, Sharafiz and Azman, Muhammad Amin (2022) Peridynamic model for tensile elongation and fracture simulations of polymethyl methacrylate notched specimens. Applied Mechanics and Materials, 909. pp. 11-28. ISSN 1660-9336; ESSN: 1662-7482

Azlin, M. N. M. and Sapuan, S. M. and Zuhri, M. Y. M. and Zainudin, Edi Syams and Ilyas, R. A. (2022) Thermal stability, dynamic mechanical analysis and flammability properties of woven kenaf/polyester-reinforced polylactic acid hybrid laminated composites. Polymers, 14 (13). art. no. 2690. pp. 1-16. ISSN 2073-4360

Azman, Abdul Hadi and Md Jedi, Muhamad Alias and Abu Samah, Asma’ and Azman, Muhammad Amin and Zirour, Mourad and Mohamed Rehan, Muhammad Saifuddin and Rasid, Mohd Azri Hizami and Abu Bakar, Nor Ashikin (2022) Effectiveness of online and face-to-face classes: a survey among Malaysian university students for engineering courses. ASEAN Journal of Teaching and Learning in Higher Education, 14 (2). 186 - 202. ISSN 1985-5826

Azman, M.A. and Bourlot, C. Le and King, A. and Fabrègue, D. and Maire, E. (2022) 4D characterisation of void nucleation, void growth and void coalescence using advanced void tracking algorithm on in situ X-ray tomographic data. Materials Today Communications, 32. art. no. 103892. pp. 1-8. ISSN 2352-4928

B

Bagheri, Milad and Ibrahim, Zelina Z. and Mansor, Shattri and Abd Manaf, Latifah and Akhir, M. F. and Talaat, W. I. A. W. and Wolf, Isabelle D. (2022) Hazard assessment and modeling of erosion and sea level rise under global climate change conditions for coastal city management. Natural Hazards Review, 24 (1). pp. 1-13. ISSN 1527-6988; ESSN: 1527-6996

Bahari, Norfarina and Hashim, Norhashila and Md Akim, Abdah and Maringgal, Bernard (2022) Recent advances in honey-based nanoparticles for wound dressing: a review. Nanomaterials, 12 (15). art. no. 2560. pp. 1-19. ISSN 2079-4991

Baharudin, Nur Sara Syuhada and Mohd Tahir, Suraya and Mohd Yusoff, Syamimi and Anuar, Anuar (2022) A modified die and tool set for material testing in the industry. Advances in Materials and Processing Technologies, 8. pp. 959-969. ISSN 2374-068X; ESSN: 2374-0698

Bajuri, F. and Bradley, D. A. and Mustafa, S. and Tamchek, N. and Ahmad Saad, F. F. and Mazlan, N. and Mohd Noor, N. (2022) Morphology and thermoluminescence characteristics of customised Ge-doped optical fibre under Am-Be neutron source as a potential to be used for space radiation detector. Radiation Physics and Chemistry, 200. pp. 1-12. ISSN 0969-806X; ESSN: 1879-0895

Balakrishnan, Thinesh Sharma and Sultan, Mohamed Thariq Hameed and Naveen, Jesuarockiam and Shahar, Farah Syazwani and Najeeb, Muhammad Imran and Md Shah, Ain Umaira and Khan, Tabrej and Sebaey, Tamer Ali (2022) Selection of natural fibre for pultruded hybrid synthetic/natural fibre reinforced polymer composites using analytical hierarchy process for structural applications. Polymers, 14 (15). art. no. 3178. pp. 1-21. ISSN 2073-4360

Basri, Ernnie Illyani and Basri, Adi Azriff and Balakrishnan, Sarveshwaaran and Haji Hameed Sultan, Mohammed Thariq and Ahmad, Kamarul Arifin (2022) Performance analysis of composite laminates wing skin with the aid of fluid structure interaction of aerodynamic loading-structural analysis. Mechanics Based Design of Structures and Machines, 52 (2). pp. 922-942. ISSN 1539-7734; ESSN: 1539-7742

Beigizadeh, Razieh and Delgoshaei, Aidin and Ariffin, Mohd Khairol Anuar and Hanjani, Sepehr Esmaeili and Ali, Ahad (2022) A comprehensive model for determining technological innovation level in supply chains using green investment, eco-friendly design and customer collaborations factors. EDP Science, 56 (4). pp. 2775-2800. ISSN 0990-7440; ESSN: 1765-2952

Ben Zair, Mohamed Meftah and Mohd Jakarni, Fauzan and Muniandy, Ratnasamy and Hassim, Salihudin and Ansari, Anwaar Hazoor (2022) A brief review: application of recycled polyethylene terephthalate as a modifier for asphalt binder. In: Lecture Notes in Civil Engineering. Springer, Cham, Moratuwa, 739 - 756. ISBN 9783030873783

Bomoi, Muhammad Isa and Mat Nawi, Nazmi and Abd Aziz, Samsuzana and Mohd Kassim, Muhamad Saufi (2022) Sensing technologies for measuring grain loss during harvest in paddy field: a review. AgriEngineering, 4 (1). 292 - 310. ISSN 2624-7402

C

Chai, K. L. and Aung, Min Min and Noor, I. M. and Lim, H. N and Abdullah, L. C. (2022) Observation of ionic conductivity on PUA-TBAI-I2 gel polymer electrolyte. Scientific Reports, 12 (124). pp. 1-20. ISSN 2045-2322

Chakrawarthi, Vijayaprabha and Dharmar, Brindha and Avudaiappan, Siva and Amran, Mugahed and Flores, Erick Saavedra and Alam, Mohammad Ayaz and Fediuk, Roman and Vatin, Nikolai Ivanovicn and M. Rashid, Raizal S. (2022) Destructive and non-destructive testing of the performance of copper slag fiber-reinforced concrete. Materials, 15 (13). art. no. 4536. pp. 1-24. ISSN 1996-1944

Chandrasekar, M. and Shahroze, R. M. and Kumar, T. Senthil Muthu and Senthilkumar, K. and Ishak, M. R. and Rajini, N. and Siengchin, S. (2022) Influence of a silica aerogel filler on the mechanical, thermal, and physical properties of flax/epoxy composite. Mechanics of Composite Materials, 58 (2). 271 - 282. ISSN 0191-5665; ESSN: 1573-8922

Che Bakar, Mohd Basri and Muhammad Rashid, Raizal Saifulnaz and Amran, Mugahed and Jaafar, Mohd Saleh and Vatin, Nikolai Ivanovicn and Fediuk, Roman (2022) Flexural strength of concrete beam reinforced with CFRP bars: a review. Materials, 15 (3). art. no. 1144. pp. 1-21. ISSN 1996-1944

Chen, Aolin and Basri, Adi Azriff and Ismail, Norzian and Ahmad, Kamarul Arifin (2022) The numerical analysis of non-newtonian blood flow in a mechanical heart valve. Processes, 11 (1). pp. 1-19. ISSN 2227-9717

Chen, Aolin and Basri, Adi Azriff and Ismail, Norzian and Tamagawa, Masaaki and Zhu, Di and Ahmad, Kamarul Arifin (2022) Simulation of mechanical heart valve dysfunction and the non-newtonian blood model approach. Applied Bionics and Biomechanics, 2022. art. no. 9612296. pp. 1-14. ISSN 1176-2322; ESSN: 1754-2103

Cheng, Ee Meng and Lee, Kim Yee and Khor, Shing Fhan and Mohd Nasir, Nashrul Fazli and Mohamad, Che Wan Sharifah Robiah and Abdul Aziz, Nor Azah and Mohd Tarmizi, Emma Ziezie and Baharuddin, Siti Aishah (2022) Microwave dielectric and reflection analysis on pure and adulterated Trigona Honey and Honey Gold. Radioengineering, 31 (3). 281 - 294. ISSN 1210-2512; ESSN: 1805-9600

Chin Hashim, Nur Fizura and Khaled, Alfadhl Yahya and Jamaludin, Diyana and Abd Aziz, Samsuzana (2022) Electrical impedance spectroscopy for moisture and oil content prediction in oil palm (Elaeis guineensis Jacq.) fruitlets. Plants, 11 (23). art. no. 3373. pp. 1-13. ISSN 2223-7747

Chong, Zhi Ken and Saadon, Syamimi (2022) Analysis of recuperation supercritical carbon dioxide cycle for heat recovery of an aircraft engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (2). pp. 1-9. ISSN 2289-7879

Chong, Zhi Ken and Saadon, Syamimi (2022) Performance analysis of supercritical carbon dioxide-brayton cycle for waste heat recovery using aspen plus. Penerbit Akademia Baru, 93 (1). pp. 8-12. ISSN 2289-7895

Choo, Boon Chong and Abdul Razak, Musab and Awang Biak, Dayang Radiah and Mohd Tohir, Mohd Zahirasri and Syafiie, S. (2022) A review on supervised machine learning for accident risk analysis: challenges in Malaysia. Process Safety Progress, 41 (spec. 1). 147 - 158. ISSN 1066-8527; ESSN: 1547-5913

Chua, Kean Hong and Sai, Siong Jun and Chan, Chi Yen and Kamsani, Noor Ain and Che Soh, Azura and Raja Ahmad, Raja Mohd Kamil (2022) Development of a wearable human fall detection system. Journal of Emerging Technologies and Industrial Applications, 1 (2). pp. 1-13. ISSN 2948-507X

Corda, John Valerian and Shenoy, B. Satish and Ahmad, Kamarul Arifin and Lewis, Leslie and K., Prakashini and Abdul Khader, S. M. and Zuber, Mohammad (2022) Nasal airflow comparison in neonates, infant and adult nasal cavities using computational fluid dynamics. Computer Methods and Programs in Biomedicine, 214. art. no. 106538. pp. 1-12. ISSN 1872-7565; ESSN: 0169-2607

Cui, Hairu and Hanafi, Marsyita and Fazlil Ilahi, Wan Fazilah and Zamri, Mohd Amir Sabrin and Shafie, Siti Mariam and Mashohor, Syamsiah (2022) The effect of smart fertigation systems on chilli grown in a greenhouse for urban farming. Irrigation and Drainage, 71 (4). pp. 959-970. ISSN 1531-0353; ESSN: 1531-0361

D

Dehghan, Shayan and Abbasi, Rasol and Baharudin, B. T. Hang. Tuah b. and Mousavi, Mohsen Loh and Soury, Ehsan (2022) A novel approach to friction drilling process: experimental and numerical study on friction drill joining of dissimilar materials AISI304/AL6061. Metals, 12 (6). art. no. 920. pp. 1-29. ISSN 2075-4701

Dele-Afolabi, Temitope T. and Hanim, M. A. Azmah and Vidyatharran, K. and Amin Matori, Khamirul Amin and O. Saliza, Azlina and Recep, Çalin (2022) Interfacial microstructure evolution and shear strength of MWCNTs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish. Journal of Materials Science: Materials in Electronics, 33 (10). 8233 - 8246. ISSN 0957-4522; ESSN: 1573-482X

Delgoshaei, Aidin and Beighizadeh, Razieh and Mohd Arffin, Mohd Khairol Anuar and Leman, Zulkiflle and Ali, Ahad (2022) Forecast innovative development level in green supply chains using a comprehensive fuzzy algorithm. International Journal of Fuzzy Systems, 25 (2). pp. 880-895. ISSN 1562-2479; ESSN: 2199-3211

Delgoshaei, Aidin and Mohd Ariffin, Mohd Khairol Anuar and Leman, Zulkiflle (2022) An effective 4–phased framework for scheduling job-shop manufacturing systems using weighted NSGA-II. Mathematics, 10 (23). art. no. 4607. pp. 1-28. ISSN 2227-7390

Derahman, Aishah and Zainal Abidin, Zurina (2022) Optimization of the epoxidation process parameters of fatty acid methyl esters using Response Surface Methodology (RSM) based on Central Composite Design (CCD). Scientific Research Journal, 19 (1). 91 - 113. ISSN 1675-7009; ESSN: 2289-649X

Diabis, Farag. A and Abu Talib, Abd Rahim and Al-Tarazi, Yazan and Mazlan, Norkhairunnisa and Supeni, Eris Elianddy (2022) Thermal performance of four-lobe swirl generator and its transition parts under a different type of nanofluids. CFD Letters, 14 (11). 63 - 74. ISSN 2180-1363

Dirik, Cengiz and Awang Biak, Dayang Radiah and Abdul Razak, Mus'ab and Nik Ibrahim, Nik Nor Liyana (2022) Externally initiated event in sequential risk assessment for the onshore LNG marine loading arm unit. Journal of Loss Prevention in the Process Industries, 75. art. no. 104717. pp. 1-9. ISSN 0950-4230; ESSN: 1873-3352

Doa'a Alzaqebah, Ali Ahmad (2022) Three level code division multiplexing in radio over fiber system. Masters thesis, Universiti Putra Malaysia.

Dzul Rashidi, Nur Farahana (2022) Evaluation of granular-activated carbon-attached biofilm coated in alginate-chitosan for biohydrogen production. Masters thesis, Universiti Putra Malaysia.

E

El Gaayda, Jamila and Titchou, Fatima Ezzahra and Barra, Issam and Karmal, Ilham and Afanga, Hanane and Zazou, Hicham and Yap, Pow-Seng and Zainal Abidin, Zurina and Mohamed Hamdani and Akbour, Rachid Ait (2022) Optimization of turbidity and dye removal from synthetic wastewater using response surface methodology: effectiveness of Moringa oleifera seed powder as a green coagulant. Journal of Environmental Chemical Engineering, 10 (1). art. no. 106988. pp. 1-12. ISSN 2213-2929; ESSN: 2213-3437

Eldeek, Mahmoud Ibrahim and Mohd Jakarni, Fauzan and Muniandy, Ratnasamy and Hassim, Salihudin (2022) Utilization of waste cooking oil as a sustainable product to improve the physical and rheological properties of asphalt binder: a review. In: Road and Airfield Pavement Technology: Proceedings of 12th International Conference on Road and Airfield Pavement Technology, 2021. Lecture Notes in Civil Engineering . Springer Cham, Switzerland, 883 - 901. ISBN 9783030873783; EISBN: 9783030873790

Esfahan, Zahra Maghareh and Shamsul Izhar and Izadiyan, Zahra and Toozandejani, Meysam and Yoshida, Hiroyuki (2022) One-step synthesis of bovine serum albumin nanoparticles by hydrothermal green treatment. Iranian Journal of Chemistry and Chemical Engineering (International English Edition), 41. 1601 - 1610. ISSN 1021-9986; ESSN:

F

Farooqi, Awais and Othman, Muhammad Murtadha and Mohd Radzi, Mohd Amran and Musirin, Ismail and Mohammad Noor, Siti Zaliha and Zainal Abidin, Izham (2022) Dynamic voltage restorer (DVR) enhancement in power quality mitigation with an adverse impact of unsymmetrical faults. Energy Reports, 8 (suppl. 1). 871 - 882. ISSN 2352-4847

Fatdillah, Eva and Rehan, Balqis M. and Rameshwaran, Ponnambalam and Bell, Victoria A. and Zulkafli, Zed and Yusuf, Badronnisa and Sayers, Paul (2022) Spatial estimates of flood damage and risk are influenced by the underpinning DEM resolution: a case study in Kuala Lumpur, Malaysia. Water, 14 (14). art. no. 2208. pp. 1-18. ISSN 2073-4441

Fong, W. L. and Bashar, KhA. and Baki, S. O. and Karim, M. K. A. and Sayyed, M. I. and Mahdi, M. A. and Goh, B. T. (2022) Influence of Bi2O3 content on structural, optical and radiation shielding properties of transparent Bi2O3-Na2O-TiO2-ZnO-TeO2 glass ceramics. Radiation Physics and Chemistry, 200. pp. 1-15. ISSN 0969-806X

Foong, Hui Foh and Lim, Sook Yee and Rokhani, Fakhrul Zaman and Bagat, Mohamad Fazdillah and Abdullah, Siti Farra Zillah and Hamid, Tengku Aizan and Ahmad, Siti Anom (2022) For better or for worse? a scoping review of the relationship between internet use and mental health in older adults during the COVID-19 pandemic. International Journal of Environmental Research and Public Health, 19 (6). art. no. 3658. pp. 1-15. ISSN 1661-7827; ESSN: 1660-4601

G

Ganapathy, Sakthi Balan and Sakthivel, Aravind Raj and Hameed Sultan, Mohamed Thariq and Shahar, Farah Syazwani and Md Shah, Ain Umaira and Khan, Tabrej and Sebaey, Tamer A. (2022) Effect of Prosopis juliflora thorns on mechanical properties of plastic waste reinforced epoxy composites. Polymers, 14 (7). art. no. 1278. pp. 1-19. ISSN 2073-4360

Garg, Amit Kumar and Janyani, Vijay and H. Aly, Moustafa and Zainol Abidin, N. H. and Mustapha Kamil, Yasmin and Radhouene, Massoudi (2022) Flexible energy-efficient and direct intra-ODN/OPN communication capable TWDM PON architecture with centralized OLT sharing among multiple optical networks. Optical Fiber Technology, 72. pp. 1-14. ISSN 1068-5200; ESSN: 1095-9912

Ghaffari, Sina and Tahir, Suraya and Mohamed Ariff, Azmah Hanim and Ismail, M. I. S. (2022) Effects of ECAR process on the mechanical properties of explosively welded Al/ Cu/Al. Australian Journal of Mechanical Engineering, 20. 1407 - 1412. ISSN 1448-4846; ESSN: 2204-2253

Ghani, Marzieh and Assadian, Nima and Varatharajoo, Renuganth (2022) Attitude and deformation coupled estimation of flexible satellite using low-cost sensors. Advances in Space Research, 69 (1). 677 - 689. ISSN 0273-1177; ESSN: 1879-1948

Gohar, Nadeem (2022) Flexible self-locking intermodular connection for prefabricated modular steel buildings. Doctoral thesis, Universiti Putra Malaysia.

Gsangaya, Kisheen Rao and Hussen Hajjaj, Sami Salama and Sultan, Mohamed Thariq Hameed and Shahar, Farah Syazwani and Md Shah, Ain Umaira (2022) Portable IoT body temperature screening system to combat the adverse effects of COVID-19. Journal of Sensor and Actuator Networks, 11 (2). art. no. 22. pp. 1-13. ISSN 2224-2708

Gunam Resul, Mohamad Faiz Mukhtar and Abdul Rehman and Fern´andez, Ana María L´opez and Eze, Valentine C. and Harvey, Adam P. (2022) Continuous process for the epoxidation of terpenes using mesoscale oscillatory baffled reactors. Chemical Engineering and Processing - Process Intensification, 177. art. no. 108998. pp. 1-11. ISSN 0255-2701; ESSN: 1873-3204

H

Hamzah, Muhammad Hazwan and Md Rahim, Anies Zulaikha and Maringgal, Bernard and Mohd Basri, Mohd Salahuddin and Ibrahim, Salis (2022) Optimization of silk fibroin coating during storage using response surface methodology and its effect on the physicochemical properties of Solanum ferox (S. ferox). Journal of Food Measurement and Characterization, 16 (5). pp. 1-34. ISSN 2193-4126; ESSN: 2193-4134

Hamzah, Muhammad Hazwan and Mohd Basri, Mohd Salahuddin and Maringgal, Bernard and Mohd Ali, Maimunah and Wondi, Mohd Hafizz and Che Man, Hasfalina and Abdulloh, Sukardi Gatuk (2022) Exploring dabai (Canarium odontophyllum), indigenous fruit of Borneo: a review of nutritional values, potential uses, emerging application in essential oil processing and health benefits. Plants, 11 (19). art. no. 2646. pp. 1-17. ISSN 2223-7747

Hanim, M.A. Azmah and S.N. Hadirah, Hadirah and Dele-Afolabi, T.T. and Jung, D.W. and Sapuan, S. M. and Jaafar, C.N. Aiza (2022) Microstructure and hardness properties of aluminum matrix composites reinforced with iron (iii) oxide nanoparticles and carbon nanotubes. Materialwissenschaft und Werkstofftechnik, 53 (9). 1121 - 1127. ISSN 0933-5137

Hanipah, Suhaiza Hanim and Talib, Ahmad Tarmezee and P Mohammed, Mohd Afandi and Baharuddin, Azhari Samsu and Wakisaka, Minato (2022) Oil palm fibers micromechanics: anisotropic behavior. Journal of Natural Fibers, 19 (17). 15541 - 15551. ISSN 1544-0478; ESSN: 1544-046X

Hanoon, Sadeq Khaleefah and Abdullah, Ahmad Fikri and M. Shafri, Helmi Z. and Wayayok, Aimrun (2022) A novel approach based on machine learning and public engagement to predict water-scarcity risk in urban areas. International Journal of Geo-Information, 11 (12). art. no. 606. pp. 1-24. ISSN 2220-9964

Hanoon, Sadeq Khaleefah and Abdullah, Ahmad Fikri and Mohd Shafri, Helmi Zulhaidi and Wayayok, Aimrun (2022) Using scenario modelling for adapting to urbanization and water scarcity: towards a sustainable city in semi-arid areas. Periodicals of Engineering and Natural Sciences, 10 (1). 518 - 532. ISSN 2303-4521

Haris, Nur Izzah Nabilah and Hassan, Mohamad Zaki and Ilyas, R. A. and Suhot, Mohamed Azlan and Sapuan, S. M. and Dolah, Rozzeta and Mohammad, Roslina and M. Asyraf, M. R. (2022) Dynamic mechanical properties of natural fiber reinforced hybrid polymer composites: a review. Journal of Materials Research and Technology, 19. pp. 167-182. ISSN 2238-7854

Harith, N. and Hafriz, R. S. R. M. and Arifin, N. A. and Tan, Ee Sann and Salmiaton, A. and Shamsuddin, A. H. (2022) Catalytic co-pyrolysis of blended biomass – plastic mixture using synthesized metal oxide(MO)-dolomite based catalyst. Journal of Analytical and Applied Pyrolysis, 168. art. no. 105776. pp. 1-13. ISSN 0165-2370; ESSN: 1873-250X

Haron, Nor Azidawati and Yusuf, Badronnisa and Sulaiman, Mohd Sofiyan and Ab Razak, Mohd Shahrizal and Siti Nurhidayu (2022) Morphological assessment of river stability: review of the most influential parameters. Sustainability, 14 (16). art. no. 10025. pp. 1-15. ISSN 2071-1050

Harun, Nur Haninah (2022) Synthesis, characterization and filtration of adsorptive biobased membrane from Jatropha oil modified with graphene oxide. Doctoral thesis, Universiti Putra Malaysia.

Harun, Nur Haninah and Zainal Abidin, Zurina and Majid, Umar Adam and Abdul Hamid, Mohamad Rezi and Abdullah, Abdul Halim and Othaman, Rizafizah and Harun, Mohd Yusof (2022) Adopting sustainable Jatropha oil bio-based polymer membranes as alternatives for environmental remediation. Polymers, 14 (16). art. no. 3325. pp. 1-19. ISSN 2073-4360

Harussani, M.M. and Sapuan, S.M. and Nadeem, Gohar and Rafin, Tahrim and Kirubaanand, W. (2022) Recent applications of carbon-based composites in defence industry: a review. Defence Technology, 18 (8). pp. 1281-1300. ISSN 2214-9147

Hashim, Norhashila and I. Onwude, Daniel and Maringgal, Bernard (2022) Technological advances in postharvest management of food grains. In: Research and Technological Advances in Food Science. Academic Press, 371 - 406. ISBN 9780128243695

Hassan, Mohamad Zaki and Ibrahim, Mohamad Ikhwan and Sapuan, S. M. (2022) Tensile properties analysis and characterization of single fiber and biocomposites. In: Value-Added Biocomposutes: Technology, Innovation, and Opportunity. CRC Press, U.S.A, 87 - 101. ISBN 978036784266

Hassani, Abdelkader and Hussain, Siti Aslina and Al-Qubaisi, Mothanna Sadiq and Belfar, Mohamed Lakhder and Belkhalfa, Hakim and Enezei, Hamid Hammad and Zentou, Hamid and Ibrahim, Wisam Nabeel and Doolaanea, Abd Almonem (2022) Curcumin gum Arabic nanoparticles demonstrate potent antioxidant and cytotoxic properties in human cancer cells. BIOCELL, 46 (3). 677 - 687. ISSN 0327-9545; ESSN: 1667-5746

Haw, Jia Yong and Mohd Yousof, Mohd Fairouz and Abd Rahman, Rahisham and Talib, Mohd Aizam and Azis, Norhafiz (2022) Classification of fault and stray gassing in transformer by using duval pentagon and machine learning algorithms. Arabian Journal for Science and Engineering, 47 (11). pp. 14355-14364. ISSN 2193-567X; ESSN: 2191-4281

Hazmi, Balkis and Rashid, Umer and Kawi, Sibudjing and Wan Mokhtar, Wan Nur Aini and Ahmad Ahangar, Firdous and Choong, Thomas Shean Yaw and Tsubota, Toshiki and A. Alharthi, Fahad and Ngamcharussrivichai, Chawalit (2022) A heterogeneous bifunctional carbon nanocatalyst from plastic waste to efficiently catalyze waste cooking oil into biodiesel. Catalysts, 12 (8). art. no. 874. pp. 1-17. ISSN 2073-4344

Hazmi, Balkis and Rashid, Umer and Kawi, Sibudjing and Wan Mokhtar, Wan Nur Aini and Choong, Thomas Shean Yaw and Moser, Bryan R. and Alsalme, Ali (2022) Palm fatty acid distillate esterification using synthesized heterogeneous sulfonated carbon catalyst from plastic waste: characterization, catalytic efficacy and stability, and fuel properties. Process Safety and Environmental Protection, 162. 1139 - 1151. ISSN 0957-5820; ESSN: 1744-3598

Hazrol, M. D. and M. Sapuan, S. and Zainudin, E. S. and A. Wahab, N. I. and A. Ilyas, R. (2022) Effect of kenaf fibre as reinforcing fillers in corn starch-based biocomposite film. Polymers, 14 (8). art. no. 1590. pp. 1-16. ISSN 2073-4360

Hisham Hamid, Norul and Abu Bakar, Mohd Supian and Ahmad Ludin, Norasikin and Abdullah, Ummi Hani and Najm, Asmaa Soheil (2022) The processing and treatment of other types of oil palm biomass. In: Oil palm biomass for composite panels: fundamentals, processing, and applications. Elsevier, Amsterdam, pp. 191-213. ISBN 9780128238523

Hmidah, Nawal Abdunasseer and Haron, Nuzul Azam and Alias, Aidi Hizami and Law, Teik Hua and Altohami, Abubaker Basheer Abdalwhab and Raja Ahmad Effendi, Raja Ahmad Azmeer (2022) The role of the interface and interface management in the optimization of BIM multi-model applications: a review. Sustainability, 14 (3). art. no. 1869. pp. 1-33. ISSN 2071-1050

Hossain, Md Hasnat and Mohd Radzi, Mohd Amran and Zaed, Md Abu and Rahman, Saidur and Shafie, Suhaidi and Hossain, Md Showkot (2022) Synthesis and thermophysical properties of Ti3C2TX -based vanadium bromide redox flow for green energy storage. In: 2022 IEEE International Conference on Power and Energy (PECon2022), 5-6 Dec. 2022, Langkawi, Kedah, Malaysia. (pp. 132-137).

Hossain, Md Showkot and Hossain, Md Israfil and Mohd Said, Nurul Ain and Abd. Halim, Wahidah and Mohd Azam, Sazuan Nazrah and Hossain, Md Hasnat (2022) Nearest level control technique for three-phase transistor clamped H-bridge multilevel inverter. In: 2022 IEEE International Conference on Power and Energy (PECon2022), 5-6 Dec. 2022, Langkawi, Kedah, Malaysia. (pp. 71-76).

How, Cai-Kian and Soltani, Soroush and Chuah, Teong-Guan and Phuah, Eng-Tong and Choong, Thomas Shean-Yaw (2022) Adsorption properties of β-carotene on mesoporous carbon-coated honeycomb monolith: kinetics, thermodynamics, and regeneration studies. Korean Journal of Chemical Engineering, 39. pp. 3109-3120. ISSN 0256-1115; ESSN: 1975-7220

Hussein, Msebawi Muntadher Sabah Abdul (2022) Effects of CuO and SiO2 as reinforcement in aluminium (AA6061) chips hybrid nanocomposites using hot extrusion process. Doctoral thesis, Universiti Putra Malaysia.

I

Ibrahim, Abeer A. Z. and Hashim, Fazirulhisyam and Sali, Aduwati and Noordin, Nor K. and Fadul, Saber M. E. (2022) A multi-objective routing mechanism for energy management optimization in SDN multi-control architecture. IEEE Access, 10. pp. 20312-20327. ISSN 2169-3536

Ibrahim, N. K. and Sali, A. and A. Karim, H. and Ramli, A. F. and Ibrahim, N. S. and Grace, D. (2022) Multiple description coding for enhancing outage and video performance over relay-assisted cognitive radio networks. IEEE Access, 10. 11750 - 11762. ISSN 2169-3536

Ibrahim, Siti Azlida and Abdul Rahman, Norizah and Yaacob, Mohd Hanif and Abu Bakar, Muhammad Hafiz (2022) Self-assembled polyaniline nanostructures in-situ deposited on silica optical fibers for ammonia gas sensing. Synthetic Metals, 283. art. no. 116962. pp. 1-8. ISSN 0379-6779

Ibrahim, Siti Azlida and Abdul Rahman, Norizah and Yaacob, Mohd Hanif and Abu Bakar, Muhammad Hafiz and Mohamad, Fatimah Syahidah and Mohd Yahya, Nor Akmar and Md. Yusoff, Nelidya and Mahdi, Mohd Adzir (2022) Self-assembled polyaniline nanostructures in situ deposited on silica optical fibers for ammonia gas sensing. Synthetic Metals, 283. art. no. 116962. pp. 1-8. ISSN 0379-6779; ESSN: 1879-3290

Ikhtiar, Usman and Hairuddin, Abdul Aziz and Asarry, Azizan and Md Rezali, Khairil Anas and Muhammad Ali, Hafiz (2022) Numerical investigation of lamella heat exchanger for engine intake charge air cooling utilizing refrigerant as coolant medium. Alexandria Engineering Journal, 65. pp. 661-673. ISSN 1110-0168

Ilyas, R. A. and M. Y., M. Zuhri and A., Aisyah H. and M. R., M. Asyraf and A. Hassan, S. and Zainudin, E. S. and Salit, Mohd Sapuan and Sharma, S. and Bangar, S. P. and R., Jumaidin and Nawab, Y. and M. Faudzi, A. A. and Abral, H. and M. Asrofi and E. Syafri and N. H. Sari (2022) Natural fiber-reinforced polylactic acid, polylactic acid blends and their composites for advanced applications. Polymers, 14 (1). art. no. 202. pp. 1-39. ISSN 2073-4360

Ilyas, R. A. and Salit, Mohd Sapuan and Bayraktar, Emin and Abu Hassan, Shukur and Hayeemasae, Nabil and M. S. N., Atikah and Shaker, Khubab (2022) Fiber-reinforced polymer composites: mechanical properties and applications. Polymers, 14 (18). art. no. 3732. pp. 1-16. ISSN 2073-4360

Ilyas, R. A. and Sapuan, S. M. and Bayraktar, Emin (2022) Bio and synthetic based polymer composite materials. Polymers, 14 (18). art. no. 3778. pp. 1-5. ISSN 2073-4360

Ilyas, R. A. and Zuhri, M. Y. M. and Norrrahim, Mohd Nor Faiz and Mohamad Misenan, Muhammad Syukri and Jenol, Mohd Azwan and Samsudin, Sani Amril and Nurazzi, N. M. and Asyraf, M. R. M. and Supian, A. B. M. and Bangar, Sneh Punia and Nadlene, R. and Sharma, Shubham and Omran, Abdoulhdi A. Borhana (2022) Natural fiber reinforced polycaprolactone green and hybrid biocomposites for various advanced application. Polymers, 14 (1). art. no. 182. pp. 1-28. ISSN 2073-4360

Irudayaraj, Andrew Xavier Raj and Abdul Wahab, Noor Izzri and Premkumar, Manoharan and Mohd Radzi, Mohd Amran and Sulaiman, Nasri and Veerasamy, Veerapandiyan and Farade, Rizwan A. and Islam, Mohammad Zohrul (2022) Renewable sources-based automatic load frequency control of interconnected systems using chaotic atom search optimization. Applied Soft Computing, 119. art. no. 108574. pp. 1-17. ISSN 1568-4946; ESSN: 1872-9681

Irudayaraj, Andrew Xavier Raj and Abdul Wahab, Noor Izzri and Veerasamy, Veerapandiyan and Othman, Mohammad Lutfi and Singh, Shailendra and Gooi, Hoay Beng (2022) An adaptive Zhang neural network controller for frequency control of renewable energy integrated system. In: 2022 IEEE 10th Power India International Conference (PIICON), 25-27 Nov. 2022, National Institute of Technology Delhi, India. .

Islam, Aminul and Teo, Siow Hwa and Ng, Chi Huey and Taufiq-Yap, Yun Hin and Choong, Shean Yaw Thomas and Awual, Md. Rabiul (2022) Progress in recent sustainable materials for greenhouse gas (NOx and SOx) emission mitigation. Progress in Materials Science, 132 (-). art. no. 101033. pp. 1-47. ISSN 0079-6425; ESSN: 1873-2208

Ismail, Abdul Hadi and Yaacob, Mohd Hanif and Mahdi, Mohd Adzir and Sulaiman, Yusran (2022) Influence of HKUST-1 and emeraldine based on the long-term stability of emeraldine salt-coated SP-POF for room temperature optical NH3 gas sensing. Sensors and Actuators A: Physical, 335. art. no. 113395. pp. 1-13. ISSN 0924-4247; ESSN: 1873-3069

Ismail, Asmawi and Othman, Nurul Husna and Mustapha, Mazli and Mohamed Saheed, Mohamed Shuaib and Abdullah, Zaki and Muhammed, Musa and Mohamed Saat, Asmalina and Mustapha, Faizal (2022) Mechanical performance and corrosion behaviour of diffusion-bonded A5083 aluminium and A36 mild steel with gallium interlayer. Materials, 15 (18). art. no. 6331. pp. 1-22. ISSN 1996-1944

Ismail, Bazilah and A. Wahab, Noor I. and Othman, Mohammad L. and M. Radzi, M. A. and Vijayakumar, Kanendra N. and Rahmat, Mohd K. and Naain, Muhammad N. M. (2022) The optimal location and sizing of single and multiple statcom using analytical approaches under high loading occasion. Journal of Engineering Science and Technology, 17 (6). 3973 - 3988. ISSN 1823-4690

Ismail, Bazilah and Abdul Wahab, Noor Izzri and Othman, Mohammad Lutfi and Mohd Radzi, Mohd Amran and Abdul Kahar, Nor Hidayah and Awalin, Lilik Jamilatul (2022) Optimal placement and sizing of STATCOM(s) for power system security improvement using MOPSO. In: 2022 IEEE International Conference on Power and Energy (PECon2022), 5-6 Dec. 2022, Langkawi, Kedah, Malaysia. (pp. 304-309).

Ismail, Bazilah and Abdul Wahab, Noor Izzri and Othman, Mohammad Lutfi and Mohd Radzi, Mohd Amran and Vijayakumar, Kanendra Naidu and Rahmat, Mohd Khairil and Mat Naain, Muhammad Najwan (2022) New line voltage stability index (BVSI) for voltage stability assessment in power system: the comparative studies. IEEE Access, 10. 103906 - 103931. ISSN 2169-3536

Ismail, Ismafatin Nabilah and Muhammad Taufik and Umor, N.A. and Mohamed Ramli, Norulhuda and Zulkarnaini, Zulkarnaini and Ismail, Shahrul (2022) Anammox process for aquaculture waste water treatment: operational condition, mechanism,and future prospective. Water Science & Technology, 86 (12). pp. 3093-3112. ISSN 0273-1223; ESSN: 1996-9732

Ismail, Nor Khuza Hidayu and Sobri, Shafreeza and Haris, Nur Izzah Nabilah (2022) Corrosion inhibition of mild steel by cassava peel powder in hydrochloric acid medium. Journal of Applied Science and Engineering, 26 (2). 269 - 278. ISSN 2708-9967; ESSN: 2708-9975

Israr, Haris and Chwen, Teh and Latif, Ainullotfi and Wong, King and Rahimian Koloor, Seyed and Yidris, Noorfaizal and Yahya, Mohd (2022) Preliminary structural design of coreless spoiler by topological optimization. Processes, 10 (10). art. no. 2076. pp. 1-14. ISSN 2227-9717

Issa, Mohammed Abdullah and Zentou, Hamid and H. Jabbar, Zaid and Z. Abidin, Zurina and Harun, Haninah and Abdul Halim, Noor Amirah and M. Alkhabet, Mohammed and Y. Pudza, Musa (2022) Ecofriendly adsorption and sensitive detection of Hg (II) by biomass‑derived nitrogen‑doped carbon dots: process modelling using central composite design. Environmental Science and Pollution Research, 29. pp. 86859-86872. ISSN 0944-1344; ESSN: 1614-7499

J

Jaafar, Che Nor Aiza and Saleh, Mat Husin and Noraslan, Nurul Zawanah and Zainol, Ismail and Md Rezali, Khairil Anas and Anene, Franklin and Dele-Afolabi, Temitope Theophilus (2022) The effect of heat treatment on hardness properties and microstructure of 9Cr-Mo-V T91 alloy steel. Malaysian Journal of Microscopy, 18 (2). 23 - 34. ISSN 1823-7010

Jamal, Tarique (2022) Development and characterization of arrowroot (Maranta arundinacea L.) fibre-reinforced thermoplastic starch biocomposites. Doctoral thesis, Universiti Putra Malaysia.

Jamaludin, H. and Eng, K. S. and As'arry, A. and M. Rezali, K. A. and Raja Ahmad, R. K. and Md Zain, M. Z. (2022) Design, fabricate and analysis of tremor test rig to emulate human hand tremor. AIP Conference Proceedings, 2545 (1). pp. 10-20. ISSN 0094-243X; ESSN: 1551-7616

Jamalus, Muhammad Syauqi Kusyairi and Sulaiman, Abdul Hadi and Abdullah, Fairuz and Zulkifli, Nadiatulhuda and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir and Yusoff, Nelidya Md. (2022) Selectable multiwavelength thulium-doped fiber laser based on parallel Lyot filter. Optical Fiber Technology, 70. art. no. 102892. pp. 1-7. ISSN 1068-5200; ESSN: 1095-9912

Jaman, Khairina and Amir, Nurjannah and Musa, Mohammed Ali and Zainal, Afifi and Yahya, Liyana and Abdul Wahab, Abdul Malek and Sri Suhartini and Tuan Mohd Marzuki, Tuan Nurfarhana and Harun, Razif and Idrus, Syazwani (2022) Anaerobic digestion, codigestion of food waste, and chicken dung: correlation of kinetic parameters with digester performance and on-farm electrical energy generation potential. Fermentation, 8 (1). pp. 1-19. ISSN 2311-5637

Jameel, Yusuf and Leman, Z. and Sapuan, S. M. (2022) Conceptual design of the car gear console panel made by glass/natural fiber reinforced hybrid polymer composite. Journal of Natural Fibre Polymer Composites (JNFPC), 1 (2). art. no. 3. pp. 1-7.

Jamhuri, Jamaluddin and Kamarudin, Norizah and Ismail, Mohd Hasmadi and Ahmad, Siti Azfanizam (2022) Unlocking the best timber harvesting operational planning with geospatial technology- log yard predetermination. Malaysian Forester, 85 (2). 275 - 290. ISSN 0302-2935

Jasbeer Singh, Manmit Singh and Abdul Jalil, Nawal Aswan and Abdul Rahim, Sharafiz and Zulkefli, Zamir Aimaduddin and Hasini, Hasril (2022) Thermo-economic analysis of a Coal-Fired Power Plant (CFPP) using turbine cycle heat rate and plant net heat rates at various operating loads. Pertanika Journal of Science and Technology, 30 (2). pp. 1003-1018. ISSN 0128-7680; ESSN: 2231-8526

Jifroudi, Hamidreza Maskani and Mansor, Shattri and Pradhan, Biswajeet and Abdul Halin, Alfian and Ahmad, Noordin and Abdullah, Ahmad Fikri (2022) A new approach to derive buildings footprint from light detection and ranging data using rule-based learning techniques and decision tree. Measurement, 192. art. no. 110781. pp. 1-13. ISSN 0263-2241

Joseph, Jacintha and Ishak, Asnor Juraiza and Che Soh, Azura and Kamar Bashah, Nagur Aziz and Mohammed, Abdulrahman Taha (2022) Non-destructive technique for erosion and corrosion monitoring system. International Journal of Science and Technology Research Archive, 3 (2). 179 - 188. ISSN 0799-6632

K

Kamal, Izdihar and Abdul Razak, Hairil Rashmizal and Abdul Karim, Muhammad Khalis and Mashohor, Syamsiah and Ying, Josephine Chyi Liew and Low, Yiin Jian and Zaaba, Nur Atiqah and Mazlan, Norkhairunnisa and Mohd Rafi, Nur Athirah Syima (2022) Mechanical and imaging properties of a clinical-grade kidney phantom based on polydimethylsiloxane and elastomer. Polymers, 14 (3). art. no. 535. pp. 1-10. ISSN 2073-4360

Kamaruddin, Nur Afiqah Basitah and Wan Abdul Karim Ghani, Wan Azlina and Abdul Hamid, Mohamad Rezi and Alias, Azil Bahari and Shamsudin, Abdul Halim (2022) Simulation and analysis of calorific value for biomass solid waste as a potential solid fuel source for power generation. Chemical Engineering Journal, 26 (2). 163 - 173. ISSN 1385-8947

Kamaruddin, Nuraqila Alini and Mahmud, Azwan and Alias, Mohamad Yusoff and Abd Aziz, Azlan and Yaakob, Syamsuri (2022) Performance evaluation of reconfigurable intelligent surface against distributed antenna system at the cell edge. Electronics, 11 (15). art. no. 2376. pp. 1-14. ISSN 2079-9292

Kamarudin, Saidatul Izyanie and Ismail, Alyani and Sali, Aduwati and Ahmad, Mohd Yazed and Ismail, Ismayadi and Navaie, Keivan (2022) 5G magnetic resonance coupling planar spiral coil wireless power transfer. Trends in Sciences, 20 (1). art. no. 3444. pp. 1-15. ISSN 2774-0226

Kamarudin, Siti Hasnah and Mohd Basri, Mohd Salahuddin and Rayung, Marwah and Abu, Falah and Ahmad, So’bah and Norizan, Mohd Nurazzi and Osman, Syaiful and Sarifuddin, Norshahida and Mat Desa, Mohd Shaiful Zaidi and Abdullah, Ummi Hani and Mohamed Amin Tawakkal, Intan Syafinaz and Abdullah, Luqman Chuah (2022) A review on natural fiber reinforced polymer composites (NFRPC) for sustainable industrial applications. Polymers, 14 (17). art. no. 3698. pp. 1-36. ISSN 2073-4360

Kamarul Bahrain, Siti Humairah and Che Abd Rahim, Nor Nabilah and Mahmud, Jamaluddin and Mohammed, M. N. and Salit, M. Sapuan and R. A., Ilyas and Alkhatib, Samah Elsayed and M. Asyraf, M. R. (2022) Hyperelastic properties of bamboo fiber-reinforced silicone rubber biocomposites via compression test. International Journal of Molecular Sciences, 23 (11). art. no. 6338. pp. 1-12. ISSN 1661-6596; ESSN: 1422-0067

Kamarul Bahrain, Siti Humairah and Nik Masdek, Nik Rozlin and Mahmud, Jamaluddin and Mohammed, M. N. and Salit, Mohd Sapuan and Ilyas, R. A. and Mohamed, Abdullah and Shamseldin, Mohamed A. and Abdelrahman, Anas and Asyraf, M. R. M. (2022) Morphological, physical, and mechanical properties of sugar-palm (Arenga pinnata (Wurmb)Merr.)- reinforced silicone rubber biocomposites. Materials, 15 (12). art. no. 4062. pp. 1-16. ISSN 1996-1944

Kantono, Kevin and How, Muhammad Syahmeer and Wang, Qian Janice (2022) Design of experiments meets immersive environment: optimising eating atmosphere using artificial neural network. Appetite, 176. art. no. 106122. pp. 1-7. ISSN 0195-6663

Karunakaran, Sivasanghari and Abang Abdul Majid, Dayang Laila and Jaafar, Che Nor Aiza and Ismail, Muhammad Hussain and Imran, Husam Yahya (2022) Heating techniques of Shape Memory Alloy (SMA) - a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 99 (2). 207 - 220. ISSN 2289-7879

Katibi, Kamil Kayode and Md Yunos, Khairul Faezah and Che Man, Hasfalina and Aris, Ahmad Zaharin and Nor, Mohd Zuhair Mohd and Azis, Rabaah Syahidah (2022) Influence of functionalized hematite nanoparticles as a reinforcer for composite PVDF‑PEG membrane for BPF rejection: permeability and anti‑fouling studies. Journal Of Polymers And The Environment, 31 (2). art. no. 3781. pp. 768-790. ISSN 1566-2543; ESSN: 1572-8919

Katibi, Kamil Kayode and Yunos, Khairul Faezah and Che Man, Hasfalina and Aris, Ahmad Zaharin and Mohd Nor, Mohd Zuhair and Azis, Rabaah Syahidah (2022) An insight into a sustainable removal of bisphenol a from aqueous solution by novel palm kernel shell magnetically induced biochar: synthesis, characterization, kinetic, and thermodynamic studies. Polymers, 13 (21). art. no. 3781. pp. 1-30. ISSN 2073-4360

Khalid, Nurul Izzah and Sulaiman, Nurul Shaqirah and Ab Aziz, Norashikin and Taip, Farah Saleena and Sobri, Shafreeza and Mahmud Ab Rashid, Nor Khaizura (2022) Sustainable sanitation: Screening methods of electrolysing parameters for a custom-built electrolysed water generator. Cleaner Engineering and Technology, 8. art. no. 100482. pp. 1-12. ISSN 2666-7908

Khalida, Aziz (2022) Drying behaviour of food waste and leftovers for trench composting. Masters thesis, Universiti Putra Malaysia.

Khalida, Aziz and Arumugam, Veknesh and Abdullah, Luqman Chuah and Abd Manaf, Latifah and Ismail, Muhammad Heikal (2022) Dehydrated food waste for composting: an overview. Pertanika Journal of Science & Technology, 30 (4). pp. 2933-2960. ISSN 0128-7680; ESSN: 2231-8526

Khan, Abdullah (2022) Hybrid firefly and particle swarm optimization algorithm for multi-objective optimal power flow with distributed generation. Doctoral thesis, Universiti Putra Malaysia.

Khan, Tabrej and Singh, Balbir and Hameed Sultan, Mohamed Thariq and Ahmad, Kamarul Arifin (2022) Performance of a HAWT rotor with a modified blade configuration. Pertanika Journal of Science & Technology, 30 (1). pp. 201-230. ISSN 0128-7680; ESSN: 2231-8526

Khudhu, Ahmed Ridha and Samsudin, Khairulmizam (2022) IoT intrusion detection using auto-encoder and machine learning techniques. Journal of Computer Science, 18 (10). 904 - 912. ISSN 1549-3636; ESSN: 1552-6607

Khuzaimah, Zailani and Mat Nawi, Nazmi and Adam, Siti Nooradzah and Kalantar, Bahareh and Emeka, Okoli Jude and Ueda, Naonori (2022) Application and potential of drone technology in oil palm plantation: potential and limitations. Journal of Sensors, 2022. art. no. 5385505. pp. 1-18. ISSN 1687-725X; ESSN: 1687-7268

Konneh, Keifa Vamba and Masrur, Hasan and Othman, Mohammad Lutfi and Senjyu, Tomonobu (2022) Performance assessment of a hybrid complementary power system for sustainable electrification: a case study. Sustainable Cities and Society, 76. art. no. 103412. pp. 1-17. ISSN 2210-6707; ESSN: 2210-6715

L

Lai, Jin Wern and Ramli, Hafiz Rashidi and Ismail, Luthffi Idzhar and Wan Hasan, Wan Zuha (2022) Real-time detection of ripe oil palm fresh fruit bunch based on YOLOv4. IEEE Access, 10. pp. 95763-95770. ISSN 2169-3536

Lai, Lai Win and Abdul Aziz, Faieza and Hairuddin, Abdul Aziz and Abdullah, Lili Nurliyana and Hwa, Jen Yap and Saito, Hideo and Seyajah, Norhisham (2022) Effectiveness on training method using virtual reality and augmented reality applications in automobile engine assembly. ASEAN Engineering Journal, 12 (1). 01-May. ISSN 2586–9159

Lajis, Ghaibulna Abdol and Jasni, Jasronita and Kamaruddin, Mohd Faizuddin and Mohd Radzi, Mohd Amran and Azis, Norhafiz and Mohtar, Mohd Nazim (2022) Bioelectricity generation in economic crops at aquaponics system using plant microbial fuel cell. In: 2022 IEEE International Conference on Power and Energy (PECon2022), 5-6 Dec. 2022, Langkawi, Kedah, Malaysia. (pp. 99-104).

Lankaran, Zahraalsadat Elias and Nik Daud, Nik Norsyahariati and Rostami, Vahid and Md. Yusoff, Zainuddin (2022) Consolidated drained triaxial test on treated coastal soil and finite element analysis using PLAXIS 2D. Advances in Materials Science and Engineering, 2022. art. no. 7263333. pp. 1-15. ISSN 1687-8434; ESSN: 1687-8442

Law, Teik Hua and Ng, Choy Peng and Poi, Alvin Wai Hoong (2022) The sources of the Kuznets relationship between the COVID-19 mortality rate and economic performance. International Journal of Disaster Risk Reduction, 81. art. no. 103233. pp. 1-20. ISSN 2212-4209

Lazim, Siti Saripa Rabiah and Mat Nawi, Nazmi and Bejo, Siti Khairunniza and Mohamed Shariff, Abdul Rashid and Abdullah, Najidah (2022) Prediction and classification of soluble solid contents to determine the maturity level of watermelon using visible and shortwave near infrared spectroscopy. International food research journal, 29 (6). pp. 1372-1379. ISSN 2231-7546

Lee, Jesee Kar Ming (2022) Neural network modeling and optimization for spray-drying coconut milk using genetic algorithm and particle swarm optimization. Masters thesis, Universiti Putra Malaysia.

Li, F. and Choong, T. S. Y. and Abdullah, L. C. and Md Jamil, S. N. A . (2022) Investigation of glyphosate removal from aqueous solution using calcium peroxide. IOP Conference Series: Materials Science and Engineering, 1257 (1). art. no. 12041. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Li, Fan and Shean, Thomas Yaw Choong and Soltani, Soroush and Abdullah, Luqman Chuah and Md. Jamil, Siti Nurul Ain (2022) Kinetic study of Fenton-like degradation of Methylene blue in Aqueous solution using calcium peroxide. Pertanika Journal of Science and Technology, 30 (2). pp. 1087-1102. ISSN 0128-7680; ESSN: 2231-8526

Li, Fan and Shean, Thomas Yaw Choong and Soltani, Soroush and Abdullah, Luqman Chuah and Md. Jamil, Siti Nurul Ain and Amerhaider Nuar, Nurul Nazihah (2022) Investigation of glyphosate removal from aqueous solutions using Fenton-like system based on calcium peroxide. Processes, 10 (10). art. no. 2045. pp. 1-15. ISSN 2227-9717

Li, Lu and Sali, Aduwati and Liew, Jiun Terng and Saleh, Nur Luqman and Syed Ahmad, Sharifah Mumtazah and Mohd Ali, Azizi and Nuruddin, Ahmad Ainuddin and Amir Aziz, Nurizana and Sitanggang, Imas Sukaesih and Syaufina, Lailan and Nurhayati, Ati Dwi and Nishino, Hisanori and Asai, Nobuyuki (2022) Estimation of ground water level (GWL) for tropical peatland forest using machine learning. IEEE Access, 10. pp. 126180-126187. ISSN 21693536

Li, Lu and Ya’acob, Mohammad Effendy and Anuar, Mohd Shamsul and Mohtar, Mohd Nazim (2022) Comprehensive review on the application of inorganic and organic photovoltaics as greenhouse shading materials. Sustainable Energy Technologies and Assessments, 52 (pt. A). art. no. 102077. 2213 - 1388. ISSN 2213-1388

Li, Shiyi and Sobri, Shafreeza (2022) Synthesis and performance of PAFS coagulant derived from aluminium dross. Pertanika Journal of Science & Technology, 30 (1). pp. 547-563. ISSN 0128-7680; ESSN: 2231-8526

Lim, Shu Huey and Chin, Nyuk Ling and Sulaiman, Alifdalino and Tay, Cheow Hwang and Wong, Tak Hiong (2022) Sensory analysis for cow milk product development using High Pressure Processing (HPP) in the dairy industry. Foods, 11 (9). art. no. 1233. pp. 1-19. ISSN 2304-8158

Lim, Yang Wei (2022) Standard cell library evaluation and optimization for near-threshold voltage operation. Doctoral thesis, Universiti Putra Malaysia.

Lim, Yang Wei and Kamsani, Noor Ain and Mohd Sidek, Roslina and Hashim, Shaiful Jahari and Rokhani, Fakhrul Zaman (2022) Energy-performance optimization via P/N ratio sizing with full diffusion layout structure and standard cell height tuning in near-threshold voltage operation. IEEE Access, 11. pp. 12536-12546. ISSN 2169-3536

Loganathan, Tamil Moli and Sultan, Mohamed Thariq Hameed and Ahsan, Qumrul and Jawaid, Mohammad and Naveen, Jesuarockiam and Md Shah, Ain Umaira and Abu Talib, Abd. Rahim and Basri, Adi Azriff (2022) Thermal degradation, visco-elastic and fire-retardant behavior of hybrid Cyrtostachys Renda/kenaf fiber-reinforced MWCNT-modified phenolic composites. Journal of Thermal Analysis and Calorimetry, 147. pp. 14079-14096. ISSN 1388-6150; ESSN:1588-2926

Lu, Li and Sali, Aduwati and Wali, Sangin Qahtan (2022) Attenuation of mmWave based on measured data via rain sensor in tropical region. In: 2022 IEEE 6th International Symposium on Telecommunication Technologies (ISTT), 14-16 Nov. 2022, Johor Bahru, Malaysia. (pp. 50-55).

Lua, Hwee Ying and Naim, Mohd Nazli and P. Mohammed, Mohd Afandi and Hamidon, Fariza and Abu Bakar, Noor Fitrah and Vangnai, Kanithaporn (2022) Inhibition of acrylamide formation in potato strip by ultrasonic-treated methylcellulose batter. International Journal of Food Science and Technology, 57 (6). 3292 - 3302. ISSN 0950-5423

M

M., S. N. Atikah and W. A. K. G., Wan Azlina and Yap, Taufiq Yun Hin and Mahmoud, Omar and El-Shafay, A. S. and Ilyas, R. A. and Harun, Razif (2022) Gasification characteristics and kinetics of lipid-extracted Nannochloropsis gaditana. Processes, 10 (8). art. no. 1525. pp. 1-13. ISSN 2227-9717

M. Azlin, M. N. and Ilyas, R. A. and M. Zuhri, M. Y. and M. Sapuan, S. and M. Harussani, M. and Sharma, Shubham and Nordin, A. H. and M. Nurazzi, N. and Afiqah, A. N. (2022) 3D printing and shaping polymers, composites, and nanocomposites: a review. Polymers, 14 (1). art. no. 180. pp. 1-37. ISSN 2073-4360

M. Azlin, M. N. and M. Sapuan, S. and M. Zuhri, M. Y. and S. Zainudin, E. (2022) Effect of stacking sequence and fiber content on mechanical and morphological properties of woven kenaf/polyester fiber reinforced polylactic acid (PLA) hybrid laminated composites. Journal of Materials Research and Technology, 16. 1190 - 1201. ISSN 2238-7854

M. Azlin, M. N. and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Zainudin, E. S. (2022) Mechanical, morphological and thermal properties of woven polyester fibre reinforced polylactic acid (PLA) composites. Fibers and Polymers, 23 (1). 234- 242. ISSN 1229-9197; ESSN: 1875-0052

M. Baitab, Danish and Majid, Dayang L. and Abdullah, Ermira J. and A. Hamid, Mohd Faisal and Jang, Leong S. and Halder, Ishan Mitra (2022) Flutter performance of shape memory alloy-embedded 3D woven flexible composite plate under subsonic flow. Journal of Industrial Textiles, 51 (3). 4290- 4328. ISSN 1528-0837

M. R., M. Asyraf and M., Rafidah and Ebadi, S. and A., Azrina and M. R., Razman (2022) Mechanical properties of sugar palm lignocellulosic fibre reinforced polymer composites: a review. Cellulose, 29 (12). 6493 - 6516. ISSN 0969-0239; ESSN: 1572-882X

M.N., Noor Azline and A.B., Nabilah and S., Nor Azizi and A.A., Farah Nora Aznieta (2022) A comparative investigation on mechanical strength of blended concrete with surface modified rubber by chemical and non-chemical approaches. Case Studies in Construction Materials, 17. art. no. e01444. pp. 1-13. ISSN 2214-5095

Ma, Hai Ping and Nik Daud, Nik Norsyahariati (2022) Jointed rock failure mechanism: a method of heterogeneous grid generation for DDARF. Applied Sciences, 12 (12). art. no. 6095. pp. 1-16. ISSN 2076-3417

Ma, Yumeng and Mustapha, F. and Ishak, M.R. and Abdul Rahim, Sharafiz and Mustapha, Mazlina (2022) Data-driven methods for damage detection and identification of UAV: a review. Journal of Aeronautics, Astronautics and Aviation, 54 (4). art. no. 4. 405 - 420. ISSN 1990-7710

Mad Ali, Mohd Fahmi and Mohd Ariffin, Mohd Khairol Anuar and Delgoshaei, Aidin and Mustapha, Faizal and Supeni, Eris Elianddy (2022) A comprehensive 3-phase framework for determining the customer’s product usage in a food supply chain. Mathematics, 11 (5). art. no. 1085. pp. 1-20. ISSN 2227-7390

Madhavadas, Vaishnav and Srivastava, Divyansh and Chadha, Utkarsh and Raj, Sakthivel Aravind and Sultan, Mohamed Thariq Hameed and Shahar, Farah Syazwani and Md Shah, Ain Umaira (2022) A review on metal additive manufacturing for intricately shaped aerospace components. CIRP Journal of Manufacturing Science and Technology, 39. 18 - 36. ISSN 1755-5817

Mahdi, Baqer Saleh and Al-fadheeli, Mohammad Ali and Sulaiman, Nasri and Hizam, Hashim and Shafie, Suhaidi and Abd Shehab, Mohanad (2022) Comparative study of DC/AC inverter control techniques for three phase grid connected PV system. TEM Journal, 11 (3). 1364 - 1375. ISSN 2217-8309: ESSN: 2217-8333

Mahmod Mohammad Altwallbah, Neda and Mohd Radzi, Mohd Amran and Azis, Norhafiz and Shafie, Suhaidi and Mohd Zainuri, Muhammad Ammirrul Atiqi (2022) New perturb and observe algorithm based on trapezoidal rule: uniform and partial shading conditions. Energy Conversion and Management, 264. pp. 1-23. ISSN 0196-8904; ESSN: 1879-2227

Mahmood, Rawa Muayad and Yaakob, Syamsuri and Ahmad, Faisul Arif and Ahmad Anas, Siti Barirah and Muhammad Zamzuri, Abdul Kadir and Che Beson, Mohd Rashidi (2022) Effect of phase noise on the optical millimeter-wave signal in the DWDM-RoF system. Electronics, 11 (3). art. no. 489. pp. 1-14. ISSN 2079-9292

Mahmood Ajaj, Qayssar and Mohd Shafri, Helmi Zulhaidi and Wayayok, Aimrun and Ramli, Mohammad Firuz (2022) Common analysis methods for gaseous and solid contaminants emitted from different pollution sources: a review paper. Pollution Research, 41 (2). 416 - 439. ISSN 0257-8050

Mahmud, Nur Hidayah Huqmah and Jamil, Nor Rohaizah and Abdullah, Ahmad Fikri and Sulaiman, Mohd Sofiyan (2022) Assessment of sediment replenishment volume in Langat River system. Malaysian Journal Of Science, 41 (1). 35 - 53. ISSN 1394-3065; ESSN: 2600-8688

Maidin, N. A. and Mohd Sapuan, S. and Mohammad Taha, M. and Mohamed Yusoff, M. Z. (2022) Material selection of natural fibre using a grey relational analysis (GRA) approach. BioResources, 17 (1). 109 - 131. ISSN 0838-5785; ESSN: 1930-2126

Maleque, Md. A. and Cetin, Safa Y. and Hassan, Masjuki and Sulaiman, Mohd Hafiz and Rosli, Adib Hamdani (2022) A systematic review on corrosive-wear of automotive components materials. Jurnal Tribologi, 35. 35 - 49. ISSN 2289-7232

Mamat, Suhaini and Chuah Abdullah, Luqman and Min, Min Aung and Abdul Rashid, Suraya and Salleh, Mek Zah and Saalah, Sariah and Jusoh, Emiliana Rose and Rayung, Marwah (2022) Synthesis and characterization UV-curable waterborne polyurethane acrylate/Al2O3 nanocomposite coatings derived from Jatropha oil polyol. Biointerface Research in Applied Chemistry, 13 (2). pp. 1-22. ISSN 2069-5837

Mamehgol Yousefi, D. B. and Mohd Rafie, A. S. and Al-Haddad, S. A. R. and Syaril Azrad (2022) A systematic literature review on the use of deep learning in precision livestock detection and localization using unmanned aerial vehicles. IEEE Access, 10. 80071 - 80091. ISSN 2169-3536

Mansor, Maisarah and Zainol Abidin, Nadiah Husseini and Liew, Josephine Ying Chyi and Alresheedi, Mohammed Thamer and Garg, Amit Kumar and Janyani, Vijay and Mahdi, Mohd Adzir (2022) Cerium oxide/polydimethylsiloxane composite tapered fiber saturable absorber for mode-locked pulsed erbium-doped fiber laser. Infrared Physics & Technology, 125. art. no. 104220. pp. 1-10. ISSN 1350-4495; ESSN: 1879-0275

Mansour, Diaa-Eldin A. and Taha, Ibrahim B.m. and Farade, Rizwan A. and Abdul Wahab, Noor Izzri (2022) Partial discharge diagnosis in GIS based on pulse sequence features and optimized machine learning classification techniques. Electric Power Systems Research, 211. art. no. 108162. pp. 1-8. ISSN 0378-7796; ESSN: 1873-2046

Maqtan, Raidan and Yusuf, Badronnisa and Hamzah, Saiful Bahri (2022) Overtopping scour due to tsunami bore: laboratory study. Trends In Sciences, 19 (14). art. no. 4977. pp. 1-14. ISSN 2774-0226

Marzuki, Omar Faruqi and Teo, Ellie Yi Lih and Mohd Rafie, Azmin Shakrine (2022) Current trend in small scale solar updraft tower designs: a review. Journal of East China University of Science and Technology, 65 (2). 74 - 80. ISSN 1006-3080

Masalha, Ismail and Masuri, Siti Ujila and Badran, Omar and Mohd Ariffin, Mohd Khairol Anuar and Abi Talib, Abd Rahim and Alfaqs, Fadi (2022) Theoretical and experimental study on the performance of photovoltaic using porous media cooling under indoor condition. International Journal of Renewable Energy Development, 12 (2). pp. 313-327. ISSN 2252-4940

Masoud, Fathi and Sapuan, Salit Mohd and Anuar Mohd Ariffin, Mohd Khairol and Nukman, Yusoff and Bayraktar, Emin (2022) Experimental analysis of surface roughness in the cutting process of sugar palm fiber reinforced unsaturated polyester composites with laser beam and abrasive water jet cutting technologies. Applied Science and Engineering Progress, 16 (3). pp. 1-17. ISSN 2672-9156; eISSN: 2673-0421

Md Ali, Sham FIrdaus and Saripan, M. Iqbal and Muhammad Noor, Ahmad Shukri and Rokhani, Fakhrul Zaman and Hashim, Suhairul and Dong, Xianling (2022) Modelling and image reconstruction evaluation of a scintillation camera with silicone photomultiplier. Journal of Biomedical Physics and Engineering, 12 (2). pp. 117-126. ISSN 2251-7200

Md Sabiani, Nor Habsah and Tajarudin, Husnul Azan and Wan Ab Karim Ghani, Wan Azlina and Idris, Azni and Samsu Baharuddin, Azhari (2022) Kinetic evaluation of sonicated food waste in continuously stirred tank reactor. Water Science and Technology, 86 (3). 395 - 409. ISSN 0273-1223; ESSN: 1996-9732

Md Yusoff, Irwan syah and Ismail, M. H. and Rohaizahtulamni, R. (2022) Impact occupational factors on safety and health through ergonomic approach among older taxi drivers in Malaysia. Malaysian Journal of Public Health Medicine, 22 (1). 116 - 123. ISSN 1675-0306

Megat Ahmad Azman, Puteri Nurain (2022) Effects of soaking techniques on physical properties and water qualities during retting process of pepper berries (Piper nigrum L.). Masters thesis, Universiti Putra Malaysia.

Megat Ahmad Azman, Puteri Nurain and Shamsudin, Rosnah and Che Man, Hasfalina and Ya’acob, Mohammad Effendy (2022) Effects of flowing water on soaking water quality during the retting process of pepper berries (Piper Nigrum L.). Advances in Agricultural and Food Research Journal, 3 (1). pp. 1-10. ISSN 2735-1084

Misnan, Mohamad Farid and M. Thamrin, Norashikin and Nik Ibrahim, Nik Nor Liyana (2022) Smart sustainable water monitoring system via internet of things (IOT) for water retention pond UITM cawangan Johor, Kampus Pasir Gudang. International Journal Of Sustainable Construction Engineering And Technology, 13 (2). pp. 1-7. ISSN 2180-3242; ESSN: 2600-7959

Mohad Azmi, N. H. and Suppiah, S. and Ibrahim, N. S. N. and Ibrahim, B. and Seriramulu, V. P. and Piersson, A. D. and Mohamad Aznan, M. N. and Karuppiah, T. and Omar, N. F. and Ibrahim, N. and Razali, R. M. and Harrun, N. H. and Sallehuddin, H. and Syed Nasser, N. and Saripan, M. I. (2022) Brain morphometry and Seed-based analysis of resting-state functional connectivity in default mode network of Alzheimer's disease patients compared with healthy control subjects in the Klang Valley, Malaysia. Journal of Medical Imaging and Radiation Sciences (JMIRS), 53 (4 suppl. 1). p. 27. ISSN 1939-8654; ESSN: 1876-7982

Mohamad, Muhammad Fuad and Sowat, Sharence Nai and Selamat, Hazlina and Azaman, Aizreena and Harith, Hazreen H. (2022) Structural design of a passive wearable exoskeleton to assist oil palm harvesting operation. Journal of Oil Palm Research. pp. 1-15. ISSN 2811-4701 (In Press)

Mohamad, Nur Aqilah and Azis, Norhafiz and Haron, Ahmad Razani and Thien, Yee Von and Yaakub, Zaini (2022) AC withstand voltage of palm oil based CuO nanofluids with CTAB, SDS and OA. In: 2022 IEEE International Conference on Power and Energy (PECon2022), 5-6 Dec. 2022, Langkawi, Kedah, Malaysia. (pp. 45-48).

Mohamad, Shahril and Abdullah, Luqman Chuah and Jamari, Saidatul Shima and Osman Al Edrus, Syeed Saifulazry and Aung, Min Min and Sy Mohamad, Sharifah Fathiyah (2022) Influence of drying method on the crystal structure and thermal property of oil palm frond juice-based bacterial cellulose. Journal of Materials Science, 57 (2). 1462 - 1473. ISSN 0022-2461; ESSN: 1573-4803

Mohamad Idris, Aida I. and Mustapa Kamal, Siti M. and Sulaiman, Alifdalino and Omar, Rozita and Mohammad, Munira (2022) Characterization of cellulose acetate membrane at different thicknesses on sucrose concentration by forward osmosis. ASEAN Journal of Chemical Engineering, 22 (2). 337 - 346. ISSN 1655-4418; ESSN: 2655-5409

Mohamad Mazlan, Mazween and A. Talib, Rosnita and Chin, Nyuk Ling and Shukri, Radhiah and Taip, Farah Saleena and Mohd Nor, Mohd Zuhair and Abdullah, Norazlin (2022) Textural characteristics of oyster mushroom–soy protein extrudates and master curve of specific mechanical energy. Advances in Agricultural and Food Research Journal, 3 (2). art. no. 322. pp. 1-17. ISSN 2735-1084

Mohamed Ariff, Azmah Hanim and Jun Lin, Ong and Jung, Dong-Won and Mohd Tahir, Suraya and Sulaiman, Mohd Hafis (2022) Rice husk ash as pore former and reinforcement on the porosity, microstructure, and tensile strength of aluminum mmc fabricated via the powder metallurgy method. Crystals, 12 (8). art. no. 1100. pp. 1-10. ISSN 2073-4352

Mohamed Sharif, Noor Fadzilah and Ab Kadir, Mohd Zainal Abidin and Shafie, Suhaidi and Md Din, Muhamad Faiz and Yusuf, Yusnita and Samaila, Buda (2022) Light absorption enhancement using Graphene Quantum Dots and the effect of N-719 dye loading on the photoelectrode of Dye-Sensitized Solar Cell (DSSC). Key Engineering Materials, 908. 259 - 264. ISSN 1013-9826; ESSN: 1662-9795

Mohamed Yusoff, Hamdan and Lau, Kia Li and Izhar, Shamsul and Md Said, Mohamad Syazarudin (2022) Simulation of acetone-water explosion in hydrothermal extraction reactor. Case Studies in Thermal Engineering, 28. art. no. 101631. pp. 1-11. ISSN 2214-157X

Mohammad Abdul Aziz, Nur Aina and Che Soh, Azura and Abdul Rahman, Ribhan Zafira and Abdul Karim, Julia (2022) Modelling of an interacting series process for rector cooling system using system identification method. International Journal of Science and Technology Research Archive, 3 (2). 73 - 81. ISSN 0799-6632

Mohammad Ali, Hidayatullah and Mohd Rafie, Azmin Shakrine and Abdul Hamid, Mohd Faisal and Md Ali, Syaril Azrad (2022) Comparative computational study of double rotating cylinder embedded on Selig S1223 aerofoil and flat plate for high altitude platform. UPM Press, 30 (4). art. no. 26. 2767 - 2788. ISSN 0128-7680; ESSN: 2231-8526

Mohammad Hassan, Azmi and Md Rezali, Khairil Anas and Abdul Jalil, Nawal Aswan and As’arry, Azizan and Azizan, Mohd Amzar (2022) The effect of preload, density and thickness on seat dynamic stiffness. Pertanika Journal of Science & Technology, 31 (3). pp. 1267-1278. ISSN 0128-7680; ESSN: 2231-8526

Mohammad Sabri, Muhammad Haziq and Ahmad, Mohd Riduan and Al-Kahtani, Ammar Ahmed Nasser and Ab Kadir, Mohd Zainal Abidin and Shamsul Baharin, Shamsul Ammar and Lu, Gaopeng and Zhang, Hongbo and Williams, Earle and Cooray, Vernon and Nordin, Farah Hani (2022) A study of cloud-to-ground lightning flashes initiated by fast positive breakdown. Atmospheric Research, 276. art. no. 106260. pp. 1-13. ISSN 0169-8095

Mohammed, Abdulrahman A. B. A. and Hasan, Zaimah and Omran, Abdoulhdi A. Borhana and Elfaghi, Abdulhafid M. and Khattak, M.A. and Ilyas, R. A. and Sapuan, S. M. (2022) Effect of various plasticizers in different concentrations on physical, thermal, mechanical, and structural properties of wheat starch-based films. Polymers, 15 (1). art. no. 63. pp. 1-20. ISSN 2073-4360

Mohammed, Al-Khabet Mohammed Majeed (2022) Palladium-coated nanocomposite on tapered optical fiber for hydrogen sensing applications. Doctoral thesis, Universiti Putra Malaysia.

Mohammed, M. A. P. and Baharuddin, A. S. and Wakisaka, M. (2022) Numerical study of starch-gluten dough: deformation and extrusion. Journal of Food Engineering, 329. pp. 1-12. ISSN 0260-8774; ESSN: 1873-5770

Mohammed Aldhufairi and Muda, Mohd Khairul Hafiz and Mustapha, Faizal and Ahmad, Kamarul Arifin and Yidris, Noorfaizal (2022) Design of wind nozzle for nozzle augmented wind turbine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 95 (1). 36 - 43. ISSN 2289 - 7879

Mohammed Khurshid, Zmnako and Ab Aziz, Nur Fadilah and Rhazali, Zeti Akma and Ab Kadir, Mohd Zainal Abidin (2022) Effect of GIC neutral blocking devices (NBDs) on power network ferroresonance in Malaysia. IEEE Access, 10. 77225 - 77238. ISSN 2169-3536

Mohammed Noor, Nur Farhana and Kadir Shahar, Hayati and Hamid, Tengku Aizan and Zainalaludin, Zumilah and Ahmad, Siti Anom and Rokhani, Fakhrul Zaman and Ujang, Norsidah and Md Yusoff, Irwan Syah and Nor Akahbar, Siti Aisyah (2022) Understanding Travel Behavior and Sustainability of Current Transportation System for Older Adults in Malaysia: A Scoping Review. Sustainability, 14 (21). art. no. 14140. pp. 1-14. ISSN 2071-1050

Mohammed Ridha, Hussein and Hizam, Hashim and Mirjalili, Seyedali and Othman, Mohammad Lutfi and Ya'acob, Mohammad Effendy and Ahmadipour, Masoud (2022) Novel parameter extraction for single, double, and three diodes photovoltaic models based on robust adaptive arithmetic optimization algorithm and adaptive damping method of Berndt-Hall-Hall-Hausman. Solar Energy, 243. 35 - 61. ISSN 0038-092X; ESSN: 1471-1257

Mohammed Ridha, Hussein and Hizam, Hashim and Mirjalili, Seyedali and Othman, Mohammad Lutfi and Ya'acob, Mohammad Effendy and Ahmadipour, Masoud (2022) Parameter extraction of single, double, and three diodes photovoltaic model based on guaranteed convergence arithmetic optimization algorithm and modified third order Newton Raphson methods. Renewable & Sustainable Energy Reviews, 162. art. no. 112436. pp. 1-38. ISSN 1364-0321; ESSN: 1879-0690

Mohammed Ridha, Hussein and Hizam, Hashim and Mirjalili, Seyedali and Othman, Mohammad Lutfi and Ya'acob, Mohammad Effendy and Ahmadipour, Masoud and Ismaeel, Nooruldeen Q. (2022) On the problem formulation for parameter extraction of the photovoltaic model: novel integration of hybrid evolutionary algorithm and Levenberg Marquardt based on adaptive damping parameter formula. Energy Conversion and Management, 256. art. no. 115403. pp. 1-19. ISSN 0196-8904; ESSN: 1879-2227

Mohammed Ridha, Hussein and Hizam, Hashim and Mirjalili, Seyedali and Othman, Mohammad Lutfi and Ya’acob, Mohammad Effendy (2022) Zero root-mean-square error for single- and double-diode photovoltaic models parameter determination. Neural Computing and Applications, 34. pp. 11603-11624. ISSN 0941-0643; ESSN: 1433-3058

Mohammed Ridha, Hussein and Hizam, Hashim and Mirjalili, Seyedali and Othman, Mohammad Lutfi and Ya’acob, Mohammad Effendy and Abualigah, Laith (2022) A novel theoretical and practical methodology for extracting the parameters of the single and double diode Photovoltaic models. IEEE Access, 10. pp. 11110-11137. ISSN 2169-3536

Mohammed Sadiq and Sulaiman, Nasri and Mohd Isa, Maryam and Hamidon, Mohd Nizar (2022) A review on machine learning in smart antenna: methods and techniques. TEM Journal, 11 (2). 695 - 705. ISSN 2217-8309;ESSN: 2217-8333

Mohd Adib, Muhammad Nasir and Harun, Sobri and Rowshon, Md. Kamal (2022) Long-term rainfall projection based on CMIP6 scenarios for Kurau River Basin of ricea‘growing irrigation scheme, Malaysia. SN Applied Sciences, 4. art. no. 70. pp. 1-14. ISSN 2523-3963; ESSN: 2523-3971

Mohd Ali, Maimunah (2022) Artificial intelligence system for pineapple variety classification and its quality evaluation during storage using infrared thermal imaging. Doctoral thesis, Universiti Putra Malaysia.

Mohd Ali, Maimunah and Hashim, Norhashila and Abd Aziz, Samsuzana and Lasekan, Ola (2022) Characterisation of pineapple cultivars under different storage conditions using infrared thermal imaging coupled with machine learning algorithms. Agriculture, 12 (7). art. no. 1013. pp. 1-17. ISSN 2077-0472

Mohd Ali, Maimunah and Hashim, Norhashila and Abd Aziz, Samsuzana and Lasekan, Ola (2022) Quality prediction of different pineapple Ananas comosus varieties during storage using infrared thermal imaging technique. Food Control, 138. art. no. 108988. pp. 1-9. ISSN 0956-7135

Mohd Ali, Maimunah and Hashim, Norhashila and Abd Aziz, Samsuzana and Lasekan, Ola (2022) Shelf life prediction and kinetics of quality changes in pineapple (Ananas comosus) varieties at different storage temperatures. Horticulturae, 8 (11). art. no. 992. pp. 1-15. ISSN 2311-7524

Mohd Ariffin, Mohd Ruzaimi and Shafie, Suhaidi and Wan Hasan, Wan Zuha and Azis, Norhafiz and Ya'acob, Mohammad Effendy and Supeni, Eris Elianddy (2022) Development of stand-alone DC energy datalogger for off-grid PV system application based on microcontroller. Pertanika Journal of Science & Technology, 30 (1). pp. 185-199. ISSN 0128-7680; ESSN: 2231-8526

Mohd Baroyi, Syahrul Anis Hazwani and Yusof, Yus Aniza and Chin, Nyuk Ling and Othman, Siti Hajar and Mohamad Ghazali, Nashratul Shera (2022) A comparative study of high-pressure processing and microwave pasteurisation on the formation of hydroxymethylfurfural in stingless bee (Heterotrigona itama) honey. Longhua Chinese Medicine, 5. pp. 1-14. ISSN 2616-2806

Mohd Daniyal, Wan Mohd Ebtisyam Mustaqim and Fen, Yap Wing and Bashar Kamal Eddin, Faten and Abdullah, Jaafar and Mahdi, Mohd Adzir (2022) Surface plasmon resonance assisted optical characterization of nickel ion solution and nanocrystalline cellulose-graphene oxide thin film for sensitivity enhancement analysis. Physica B: Condensed Matter, 646. art. no. 414292. pp. 1-8. ISSN 0921-4526; ESSN: 1873-2135

Mohd Dom, Zanariah and Azhar, Adibah Zahiah and Masaudin, Saidatul Nurul Atika (2022) Utilization of banana peel as funtional ingredient in product development. Advance in Agricultural and Food Research Journal, 3 (2). Jan-17. ISSN 2735-1084

Mohd Hashim, Ahmad Hafiz and Azis, Norhafiz and Jasni, Jasronita and Mohd Radzi, Mohd Amran and Masahiro, Kozako and Kamarol, Mohamad and Yaakub, Zaini (2022) Partial discharge localization in oil through acoustic emission technique utilizing fuzzy logic. IEEE Transactions on Dielectrics and Electrical Insulation, 29 (2). pp. 623-630. ISSN 1070-9878; ESSN: 1558-4135

Mohd Johari, Siti Nurul Afiah and Bejo, Siti Khairunniza (2022) Automated rubber seed ventral surface identification using hue, saturation, value HSV image processing and a decision rule approach. Journal of Rubber Research, 25. pp. 173-186. ISSN 1511-1768; 2524-3993

Mohd Johari, Siti Nurul Afiah and Bejo, Siti Khairunniza and Mohamed Shariff, Abdul Rashid and Husin, Nur Azuan and Mohd Basri, Mohamed Mazmira and Kamarudin, Noorhazwani (2022) Identification of bagworm (Metisa plana) instar stages using hyperspectral imaging and machine learning techniques. Computers and Electronics in Agriculture, 194. art. no. 106739. pp. 1-14. ISSN 0168-1699; ESSN: 1872-7107

Mohd Kanafi, Nafeesa and Abdul Ghani, Anis and Abdul Rahman, Norizah and Abd Aziz, Azira and Sapuan Faris, S. M. (2022) A review of self-healable natural rubber based on reversible bonds: fundamental, design principle and performance. Journal of Materials Science, 58. pp. 608-635. ISSN 0022-2461; ESSN: 1573-4803

Mohd Mustafah, A. and Khairunniza-Bejo, S. and Lim, Y. (2022) The development of an automatic rubber seed sowing system with machine vision assistance. Journal of Rubber Research, 25. pp. 187-194. ISSN 1511-1768; ESSN: 2524-3993

Mohd Nasir, Nurfarahana and Jusoh, Ahmad and Manan, Hidayah and Kasan, Nor Azman (2022) Utilization of microalgae, Chlorella sp. UMT LF2 for bioremediation of Litopenaeus vannamei culture system and harvesting using bio-flocculant, Aspergillus niger. Biocatalysis and Agricultural Biotechnology, 47. art. no. 102596. pp. 1-14. ISSN 1878-8181

Mohd Nizam Ong, Nur Aliah Fatin and Mohd Tohir, Mohd Zahirasri and Md Said, Mohamad Syazarudin and Nasif, Mohammad Shakir and Alias, Aidi Hizami and Ramali, Mohd Rashid (2022) Development of fire safety best practices for rooftops grid-connected photovoltaic (PV) systems installation using systematic review methodology. Sustainable Cities and Society, 78. art. no. 103637. pp. 1-21. ISSN 2210-6707; ESSN: 2210-6715

Mohd Nizam Ong, Nur Aliah Fatin and Sadiq, Muhammad Adnan and Md Said, Mohamad Syazarudin and Jomaas, Grunde and Mohd Tohir, Mohd Zahirasri and Kristensen, Jens Steemann (2022) Fault tree analysis of fires on rooftops with photovoltaic systems. Journal of Building Engineering, 46. art. no. 103752. pp. 1-13. ISSN 2352-7102

Mohd Yusoff, N. and Abdul Hadi, M.A.W. and Zainol Abidin, N.H. and Alresheedi, M.T. and Goh, C. S. and Mahdi, M.A. (2022) Aluminum oxide/polydimethylsiloxane-based Q-switched mode-locked erbium-doped fiber laser. Optik - International Journal for Light and Electron Optics, 257. art. no. 168730. pp. 1-10. ISSN 0030-4026

Mohd Yusoff, Syamimi (2022) Finite element modelling of bilayer iron powder compaction and evaluation on its relative density distribution using imaging technique. Doctoral thesis, Universiti Putra Malaysia.

Mohd Yusree, Farhana Iylia Fatinee and Peter, Angela Paul and Zulkifli, Nurul Ainina and Mohd Nor, Mohd Zuhair and Mohd Basri, Mohd Salahuddin and Mokhtar, Mohd Noriznan and Awasthi, Mukesh Kumar (2022) Towards green recovery of β-amylase from slurry of sweet potato (Ipomoea batatas) of VitAto variety via liquid biphasic system. Sustainable Chemistry and Pharmacy, 25. pp. 1-13. ISSN 2352-5541

Mohidem, Nur Atikah and Hashim, Norhashila and Shamsudin, Rosnah and Che Man, Hasfalina (2022) Rice for food security: revisiting its productivity, diversity, rice milling process and nutrient content. Agriculture, 12 (6). art. no. 741. pp. 1-15. ISSN 2077-0472

Mokhtar, Makhfudzah and Wan Adnan, Wan Azizun and Mohd Harithuddin, Ahmad Salahuddin and Jamaludin, Diyana and Zan, Zuraidah and Ahmad, Faisul Arif (2022) Students’ and lecturers’ perception on the use of introductory engineering mathematics PutraMOOC. ASEAN Journal of Engineering Education, 6 (2). pp. 11-17. ISSN 2231-9433

Mokhtar, Mohd Noriznan (2022) Techno-economic evaluation of a process for the transformation of VitAto sweet potato into value-added products. Journal of Food Process Engineering, 45 (8). art. no. 14043. pp. 1-14. ISSN 0145-8876; ESSN: 1745-4530

Mollazade, K. and Hashim, N. (2022) Hyperspectral imaging for predicting the chemical composition of fresh-cut pineapple (Ananas comosus). Acta Horticulturae. art. no. 1353. 79 - 85. ISSN 0567-7572; ESSN: 2406-6168

Mudhafar, Mustafa and Alsailawi, H. A. and Zainol, Ismail and Jaafar, Che Nor Aiza (2022) Synthesis, characterisation, cytotoxicity and antibacterial studies of green synthesised silver nanoparticles using leaves of Polyalthia sclerophylla. Malaysian Journal of Microscopy, 18 (2). 79 - 91. ISSN 1823-7010; ESSN: 2600-7444

Muftah, Shalghum Khaled (2022) Flexible window-based scheduling with critical worst case latency evaluations for real time traffic in time sensitive networks. Doctoral thesis, Universiti Putra Malaysia.

Muhadi, Nur 'Atirah (2022) Development of river water level estimation from surveillance cameras for flood monitoring system using deep learning techniques. Doctoral thesis, Universiti Putra Malaysia.

Muhammad Ismail, A. H. and Al-Oqla, Faris M. and Risby, M. S. and Sapuan, S. M. (2022) On the enhancement of the fatigue fracture performance of polymer matrix composites by reinforcement with carbon nanotubes: a systematic review. Carbon Letters, 32. 727 - 740. ISSN 1976-4251; ESSN: 2233-4998

Muhammad Syahmeer How and Jones, Jim R. and Morgenstern, Marco P. and Stuart, Eli Gray and Bronlund, John E. (2022) A mechanistic approach to model the breakdown of solid food during chewing. Journal of Food Engineering, 317. art. no. 110871. pp. 1-10. ISSN 0260-8774

Muniandy, Sarwin Kumar and Salit, Mohd Sapuan and Ilyas, R. A. and Shah Faisal Khan, Sherwani and A., Azmi (2022) Sugar palm lignocellulosic fiber reinforced polymer composite: a review. Journal of Fibers and Polymer Composites, 1 (1). pp. 1-19. ISSN 2829-7687

Murad, A. and Liew, J. Y. C. and Yaacob, M. H. and Noor, I. M. and Osman, N. H. and Kamarudin, M. A. and Tan, S. T. and Lee, H. K. and Talib, Z. A. and Alresheedi, M. T. and Mahdi, M .A. (2022) Effect of nickel ion concentration on structural, optical and electrical properties towards Ni–H3BTC-MOF formation for nonlinear saturable absorption phenomenon. Journal of Physics and Chemistry of Solids, 167. art. no. 110743. pp. 1-8. ISSN 0022-3697

Murad, Amir (2022) Ultrashort pulse fiber laser incorporating nickel-based metal-organic framework saturable absorber. Doctoral thesis, Universiti Putra Malaysia.

Murad, Amir and Mohd Yusoff, Norita and Ying, Josephine Chyi Liew and Yaacob, Mohd Hanif and Goh, Chee Seong and Mahdi, Mohd Adzir (2022) Nickel 1,3,5-benzene-tricarboxylic acid-metal organic framework polymer composite saturable absorber. Results in Physics, 41. art. no. 105881. pp. 1-7. ISSN 2211-3797

Murad, Amir and Mohd Yusoff, Norita and Ying, Josephine Chyi Liew and Yaacob, Mohd Hanif and Goh, Chee Seong and Mahdi, Mohd Adzir (2022) Nickel 1,3,5-benzene-tricarboxylic acid-metal organic framework polymer composite saturable absorber for femtosecond pulse generation. Results in Physics, 41. art. no. 105881. pp. 1-7. ISSN 2211-3797

Murthy, Avinash Srikanta and Azis, Norhafiz and Jasni, Jasronita and Othman, Mohd Lutfi and Mohd Yousof, Mohd Fairouz and Martin, Daniel and Talib, Mohd Aizam (2022) Investigation of the impact of a standard lightning impulse on the structure of an 11/0.415 kV distribution transformer. Electric Power Systems Research, 202. art. no. 107588. pp. 1-13. ISSN 0378-7796; ESSN: 1873-2046

Muslim, Ali M. and Mashohor, Syamsiah and Al Gawwam, Gheyath and Mahmud, Rozi and Hanafi, Marsyita and Alnuaimi, Osama and Josephine, Raad and Almutairi, Abdullah Dhaifallah (2022) Brain MRI dataset of multiple sclerosis with consensus manual lesion segmentation and patient meta information. Data in Brief, 42. art. no. 108139. pp. 1-5. ISSN 2352-3409

Muslim, Ali M. and Mashohor, Syamsiah and Mahmud, Rozi and Al Gawwam, Gheyath and Hanafi, Marsyita (2022) Automated feature extraction for predicting multiple sclerosis patient disability using brain MRI. International Journal of Advanced Computer Science and Applications(IJACSA), 13 (3). 441 - 448. ISSN 2158-107X; ESSN: 2156-5570

Mustafa, Iswaibah and Chin, Nyuk Ling (2022) Antioxidant properties of dried ginger (Zingiber officinale Roscoe) var. Bentong. Foods, 12 (1). art. no. 178. pp. 1-18. ISSN 2304-8158

Mustafa, Mayada S. A. and M Ali, Borhanuddin and Rasid, MFA and Hashim, Shaiful J. and Saeed, I. A. (2022) A proactive greedy routing protocol precludes sink-hole formation in wireless sensor networks. International Journal of Wireless & Mobile Networks, 14 (1). pp. 1-20. ISSN 0975-4679; ESSN: 0975-3834

Mustapa Kamal, Siti Mazlina and Mohd Thani, Nurfatimah and Taip, Farah Saleena and Sulaiman, Alifdalino and Omar, Rozita (2022) Subcritical water hydrolysis of industrial cake leftovers for sugar production. Journal of Food Measurement and Characterization, 17 (3). 2204 - 2212. ISSN 2193-4126; ESSN: 2193-4134

Mustapha Kamil, Yasmin and Al-Rekabi, Sura Hmoud and Abu Bakar, Muhammad Hafiz and Yap, Wing Fen and Mohammed, Husam Abduldaem and Mohamed Halip, Nor Hafizah and Alresheedi, Mohammed Thamer and Mahdi, Mohd Adzir (2022) Arsenic detection using surface plasmon resonance sensor with hydrous ferric oxide layer. Photonic Sensors, 12 (3). art. no. 220306. pp. 1-8. ISSN 1674-9251; ESSN: 2190-7439

N

Nadeem, Gohar and Safiee, Nor Azizi and Abu Bakar, Nabilah and Abd Karim, Izian and Mohd Nasir, Noor Azline (2022) Evaluation of slip behavior of self-locking modular steel connection. Journal of Constructional Steel Research, 197. art. no. 107467. pp. 1-14. ISSN 0143-974X; ESSN: 1873-5983

Najeeb, Muhammad Imran (2022) Malaysian pineapple (Yankee) leaf fiber composites damage investigation using non-destructive techniques. Doctoral thesis, Universiti Putra Malaysia.

Nasir, H. M. and Aris, A. Z. and Abdullah, L. C. and Ismail, I. (2022) Response surface optimisation for highly efficient removal of 17α-ethinylestradiol by novel kenaf core modification in aqueous solution. International Journal of Environmental Science and Technology, 20 (5). pp. 4749-4766. ISSN 1735-1472; ESSN: 1735-2630

Nasr Ali, Nasr Abdalmanan and Kamarudin, Kamarulzaman and Chee, Kiang Lam and Muhamad Azmi, Muhamad Safwan and Ismail, Abdul Halim and Abdul Rahim, Norasmadi and Wan Yahya, Wan Mohd Nooriman and Goh, Kheng Sneah and Moey, Lip Seng and Teoh, Phaik Hai and Ong, Thean Lye and Noor Hasnan, Noor Zafira (2022) 3D reconstruction of fruit shape based on vision and edge sections. Journal of Electronic & Information Systems, 4 (1). 26 - 32. ISSN 2661-3204

Nasrallah, Siraj Abdulameer and Mohd Rafie, Azmin Shakrine (2022) The effect of different rotational speeds of a cylinder on Magnus wind turbine performance. International Review of Aerospace Engineering, 15 (2). 129 - 134. ISSN 1973-7459; ESSN: 2533-2279

Natarajan, Sureshkumar and Al-Haddad, Syed Abdul Rahman and Ahmad, Faisul Arif and Hassan, Mohd Khair and Raja Kamil and Azrad, Syaril and Yahya, Mohammed Nawfal and Macleans, June Francis and Salvekar, Pratiksha Prashant (2022) Comparative analysis of different parameters used for optimization in the process of speaker and speech recognition using deep neural network. In: 2022 International Conference on Future Trends in Smart Communities (ICFTSC), 1-2 Dec. 2022, Borneo Conventional Centre Kuching, Sarawak, Malaysia. (pp. 12-17).

Nayak, Suhas Yeshwant and Shenoy B., Satish and Kini, Chandrakant R. and Hameed Sultan, Mohamed Thariq and Shahar, Farah Syazwani (2022) Experimental investigation into mechanical properties of coconut shell powder modified epoxy/ 3d E-glass composites. Engineered Science, 20. pp. 306-320. ISSN 2576-988X

Nayyef, Muntadher Talib and Sulaiman, Nasri and Wan Hasan, Wan Zuha and Mustafa, Mohd Amrallah and Mohd Hassan, Siti Lailatul (2022) A review of medical image techniques and methods based on a multi-agent system. Tem Journal: technology, education, management, informatics, 11 (2). 811 - 819. ISSN 2217-8309; ESSN: 2217-8333

Nee, Chan Ying and Mohd Rafie, Azmin Shakrine and Harmin, Mohammad Yazdi (2022) Investigation of modal strain energy for varying ribs orientation concept of untapered wing box model. Journal of Aeronautics, Astronautics and Aviation, 54 (3). 307 - 314. ISSN 1990-7710

Nik Abdul Rahman, Nik Kechik Mujahidah and Saadon, Syamimi and Che Man, Mohd Hasrizam (2022) Heat transfer enhancement of biomass based stirling engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 100 (1). pp. 1-10. ISSN 2289-7879

Nik Abdul Rahman, Nik Kechik Mujahidah and Saadon, Syamimi and Che Man, Mohd Hasrizam (2022) Waste heat recovery of biomass based industrial boilers by using stirling engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 89 (1). pp. 1-12. ISSN 2289-7879

Noor Abbas, Al-Ghazali and Abdul Aziz, Farah Nora Aznieta and Abdan, Khalina and Mohd Nasir, Noor Azline and Huseien, Ghasan Fahim (2022) A state-of-the-art review on fibre-reinforced geopolymer composites. Construction and Building Materials, 330. art. no. 127187. pp. 1-24. ISSN 0950-0618

Noor Abbas, Al-Ghazali and Abdul Aziz, Farah Nora Aznieta and Abdan, Khalina and Mohd Nasir, Noor Azline and Norizan, Mohd Nurazzi (2022) Kenaf fibre reinforced cementitious composites. Fibers, 10 (1). art. no. 3. pp. 1-26. ISSN 2079-6439

Noor Hasnan, Noor Zafira and Kadir Basha, Roseliza and Mohd Amin, Nor Amaiza and Mohd Ramli, Sharifah Hafiza and Yew, John Huat Tang and Ab Aziz, Norashikin (2022) Analysis of the most frequent nonconformance aspects related to Good Manufacturing Practices (GMP) among small and medium enterprises (SMEs) in the food industry and their main factors. Food Control, 141. art. no. 109205. pp. 1-12. ISSN 0956-7135

Noordin, Mohd Ikram and Mohd Dom, Zanariah and Shamsudin, Rosnah and Hashim, Norhashila (2022) Effect of different cooking temperature and time of glutinous rice flakes. Advances in Agricultural and Food Research Journal, 4 (2). pp. 1-9. ISSN 2735-1084

Norsahperi, Nor Mohd Haziq and Ahmad, Salmiah and Toha, Siti Fauziah and Abd Mutalib, Mohd Azri (2022) Design, simulation and experiment of PSO-FOPID controller for height position control of a scissor mechanism platform. FME Transactions, 50 (1). 46 - 54. ISSN 1451-2092; ESSN: 2406-128X

Nur Lailatul Rahmah and Mustapa Kamal, Siti Mazlina and Sulaiman, Alifdalino and Taip, Farah Saleena and Siajam, Shamsul Izhar (2022) Optimization Of phenolic compounds and antioxidant extraction from Piper betle Linn. leaves using pressurized hot water. Journal of Applied Science and Engineering, 26 (2). 175 - 184. ISSN 2708-9967; ESSN: 2708-9975

Nurazzi, N. M. and Norrrahim, M. N. F. and Sabaruddin, F. A. and Shazleen, S. S . and Ilyas, R. A. and Lee, S. H. and M. Padzil, F. N. and Aizat, G. and Aisyah, H. A. and Mohidem, N. A. (2022) Mechanical performance evaluation of bamboo fibre reinforced polymer composites and its applications: a review. Functional Composites and Structures, 4 (1). art. no. 15009. pp. 1-36. ISSN 2631-6331

Nurulhuda, Khairudin and Muharam, Farrah Melissa and Shahar, Nurul Aina Najwa and Che Hashim, Muhamad Faiz and Ismail, Mohd Razi and Keesman, Karel J. and Zulkafli, Zed (2022) ORYZA (v3) rice crop growth modeling for MR269 under nitrogen treatments: assessment of cross-validation on parameter variability. Computers and Electronics in Agriculture, 195. pp. 1-12. ISSN 0168-1699; ESSN: 1872-7107

O

Odoh, Theophilus Ebuka and Sabo, Aliyu and Abdul Wahab, Noor Izzri (2022) Mitigation of power system oscillation in a DFIG-wind integrated grid: a review. Applications of Modelling And Simulation, 6. 134 - 149. ISSN 2600-8084

Ogunwa, Titilayo and Abdullah, Ermira and Chahl, Javaan (2022) Modeling and control of an articulated multibody aircraft. Applied Sciences, 12 (3). art. no. 1162. pp. 1-36. ISSN 2076-3417

Omar Syafiq, Razali Mohamad and Mohd Sapuan, Salit and Mohd Zuhri, Mohamed Yusoff and Othman, Siti Hajar and Ahmad Ilyas, Rushdan (2022) Effect of plasticizers on the properties of sugar palm nanocellulose/cinnamon essential oil reinforced starch bionanocomposite films. Nanotechnology Reviews, 11 (1). 423 - 437. ISSN 2191-9089; ESSN: 2191-9097

Ong, Yi Wen and Mohd Tohir, Mohd Zahirasri and Choong, Thomas Shean Yaw and Abdul Razak, Musab and Zainuddin, Halimatun Sakdiah and Abdul Hamid, Mohamad Rezi (2022) Fire-resistant and flame-retardant surface finishing of polymers and textiles: a state-of-the-art review. Progress in Organic Coatings, 175. art. no. 107330. pp. 1-26. ISSN 0300-9440; ESSN: 1873-331X

Othman, Nurul Husna and Mustapha, Mazli and Sallih, Nabihah and Ahmad, Azlan and Mustapha, Faizal and Che Ismail, Mokhtar (2022) The effect of residual solvent in carbon−based filler reinforced polymer coating on the curing properties, mechanical and corrosive behaviour. Materials, 15 (10). art. no. 3445. pp. 1-15. ISSN 1996-1944

Othman, Siti Hajar and Mohd Rosli, Nazirah and Nordin, Norhazirah and Abdul Aziz, Masturina (2022) Formulation of crispy chicken burger patty batter: properties and storage qualities. AIMS Agriculture and Food, 7 (2). 426 - 443. ISSN 2471-2086

P

Palupi, Cicilia Candra and Ngadisih and Karyadi, Joko Nugroho Wahyu and Tirtalistyani, Rose and Ismail, Muhammad Heikal and Mawandha, Hanggar Ganara (2022) Effect of Biogas slurry fertilizer on dynamics of soil consistency and tillage power requirement. Jurnal Ilmiah Rekayasa Pertanian dan Biosistem, 10 (1). 14 - 23. ISSN 2301-8119; ESSN: 2443-1354

Pandian, Amuthakkannan and Hameed Sultan, Mohamed Thariq and Manikandan, Vairavan and Marimuthu, Uthayakumar and Kanagaraj, Arun Prasath and Khan, Tabrej (2022) Effect of stacking sequence of glass and jute fiber reinforced polymer composites on their low velocity impact properties. Journal of Composite Materials, 56 (16). pp. 2599-2608. ISSN 0021-9983; ESSN: 1530-793X

Peng, Wang and Haron, Nuzul Azam and Alias, Aidi Hizami and Law, Teik Hua (2022) Leadership in construction: a scientometric review. Buildings, 12 (11). art. no. 1825. pp. 1-22. ISSN 2075-5309

Permal, Navinesshani and Osman, Miszaina and Mohd Ariffin, Azrul and Ab Kadir, Mohd Zainal Abidin (2022) The influence of fault current & soil resistivity on the substation grounding grid behaviour. In: 2022 IEEE International Conference on Power Systems Technology (POWERCON), 12-14 Sept. 2022, Kuala Lumpur, Malaysia. .

Poh, Abdul Halim and Abu Hassan, Muhammad Rosdi and Abu Bakar, Muhammad Hafiz and Mahamd Adikan, Faisal Rafiq and Moghavvemi, Mahmoud (2022) Profile morphology of Fiber Bragg Gratings during initial cracking: a case study on proof load testing of an arch spandrel segment. IEEE Sensors Journal, 22 (6). pp. 5678-5687. ISSN 1530-437X; ESSN: 1558-1748

Pushpanathan, Kalananthni and Hanafi, Marsyita and Mashohor, Syamsiah and Fazlil Ilahi, Wan Fazilah (2022) MYLPHerb-1: a dataset of Malaysian local perennial herbs for the study of plant images classification under uncontrolled environment. Pertanika Journal of Science & Technology, 30 (1). pp. 413-431. ISSN 0128-7680; ESSN: 2231-8526

Q

Qassim, Hassan M. and Hasan, Wan Zuha Wan and Ramli, Hafiz R. and Harith, Hazreen Haizi and Inche Mat, Liyana Najwa and Ismail, Luthffi Idzhar (2022) Proposed fatigue index for the objective detection of muscle fatigue using surface electromyography and a double-step binary classifier. Sensors, 22 (5). art. no. 1900. pp. 1-24. ISSN 1424-8220

Qoms, Mohammed S and Arulrajah, Brisha and Shamsudin, Rosnah and Wan Ibadullah, Wan Zunairah and Saari, Nazamid (2022) Valorization of green biomass Azolla pinnata fern: multi-parameter evaluation of processing conditions on protein extractability and their influence on the physicochemical, structural, techno-functional properties and protein quality. Journal of the Science of Food and Agriculture, 102 (15). 6974 - 6983. ISSN 0022-5142; ESSN: 1097-0010

Quzwain, Kamelia and Yamada, Yoshihide and Kamardin, Kamilia and Abd Rahman, Nurul Huda and Ismail, Alyani (2022) New reflector shaping methods for dual-reflector antenna. Radioengineering, 31 (1). 39 - 53. ISSN 1210-2512; ESSN: 1805-9600

R

R. S., R. M. Hafriz and Arifin, N. A. and A., Salmiaton and Yunus, R. and Yap, Taufiq Y. H. and Saifuddin, Nomanbhay and Shamsuddin, A. H. (2022) Multiple-objective optimization in green fuel production via catalytic deoxygenation reaction with NiO-dolomite catalyst. Fuel, 308 (1). art. no. 122041. pp. 1-19. ISSN 0016-2361; ESSN: 1873-7153

R. S., R. M. Hafriz and I., Nor Shafizaha and Arifin, N. A. and A. H., Maisarah and A., Salmiaton and Shamsuddin, A. H. (2022) Comparative, reusability and regeneration study of potassium oxide-based catalyst in deoxygenation reaction of WCO. Energy Conversion and Management: X, 13. art. no. 100173. pp. 1-14. ISSN 2590-1745

Rabea, Ahmed Faozi Ahmed and Ahmad, Siti Anom and Jantan, Sa'diah and Che Soh, Azura and Ishak, Asnor Juraiza and Raja Adnan, Raja Nurzatul Efah and Al-Qazzaz, Noor Kamal (2022) Driver’s fatigue classification based on physiological signals using RNN-LSTM technique. In: 7th IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES 2022), 7-9 Dec. 2022, Kuala Lumpur, Malaysia. (pp. 280-285).

Raffar, Nurfarhana and Zulkafli, Zed and Mok, Yiwen and Muharam, Farrah Melissa (2022) Watershed-scale modelling of the irrigated rice farming system at Muda, Malaysia, using the soil water assessment tool. Hydrological Sciences Journal, 67 (3). 462 - 476. ISSN 0262-6667; ESSN: 2150-3435

Ramali, Mohd Rashid and Mohd Nizam Ong, Nur Aliah Fatin and Md Said, Mohamad Syazarudin and Mohamed Yusoff, Hamdan and Baharudin, Mohd Rafee and Tharima, Ahmad Faiz and Akashah, Farid Wajdi and Mohd Tohir, Mohd Zahirasri (2022) A review on safety practices for firefighters during photovoltaic (PV) fire. Fire Technology, 59. 247 - 270. ISSN 0015-2684; ESSN: 1572-8099

Randjbaran, Elias (2022) Post oblique ballistic impact behaviour of hybrid composite plates reinforced with carbon nanotubes. Doctoral thesis, Universiti Putra Malaysia.

Randjbaran, Elias and Abdul Majid, Dayang Laila and Sultan, MTH and Mazlan, Norkhairunnisa (2022) Tensile strength of reinforced laminates after oblique ballistic impact: an experimental study. Journal of Industrial Textiles, 52. pp. 1-22. ISSN 1528-0837; ESSN: 1530-8057

Ranjith, Fernando H. and Ariffin, Siti Hajar and Muhialdin, Belal J. and Yusof, Noor Liyana and Mohammed, Nameer K. and Marzlan, Anis Asyila and Meor Hussin, Anis Shobirin (2022) Influence of natural antifungal coatings produced by Lacto-fermented antifungal substances on respiration, quality, antioxidant attributes, and shelf life of mango (Mangifera indica L.). Postharvest Biology and Technology, 189. art. no. 111904. pp. 1-11. ISSN 0925-5214; ESSN: 1873-2356

Razali, Siti Zulaika and Yunus, Robiah and Kania, Dina and Abdul Rashid, Suraya and Ngee, Lim Hong and Alsultan, Abdulkareem Ghassan and Mohamed Jan, Badrul (2022) Effects of morphology and graphitization of carbon nanomaterials on the rheology, emulsion stability, and filtration control ability of drilling fluids. Journal of Materials Research and Technology, 21. 2891 - 2905. ISSN 2238-7854

Ridha, Hussein Mohammed and Hizam, Hashim and Mirjalili, Seyedali and Othman, Mohammad Lutfi and Ya'acob, Mohammad Effendy and Ahmadipour, Masoud and Ismaeel, Nooruldeen Q. (2022) Multi-objective optimization and multi-criteria decision making aided by numerical method: framework and a case study of Malaysia and South Africa. Energy Conversion and Management, 274. art. no. 116468. pp. 1-22. ISSN 0196-8904; ESSN: 1879-2227

Riza, Muhammad Arif and Go, Yun Ii and Harun, Sulaiman Wadi and Ahmad Anas, Siti Barirah (2022) Effect of additive concentration on crystalline surface of ZnO nanostructures morphology for enhanced humidity sensing. Sensors International, 4 (2023). art. no. 100211. pp. 1-12. ISSN 2666-3511

Riza, Muhammad Arif and Yun, Ii Go and Maier, Robert R.J. and Harun, Sulaiman Wadi and Ahmad Anas, Siti Barirah (2022) Development of FBG humidity sensor via controlled annealing temperature of additive enhanced ZnO nanostructure coating. Optical Fiber Technology, 68. art. no. 102802. pp. 1-9. ISSN 1068-5200

Rohadi, T. N.Tuan and Mohd Jamir, Mohd Ridzuan and Abdul Majid, M. S. and Mamat, Normahira and Sulaiman, M.H. (2022) Influence of cellulose filler extracted from napier grass on thermal characterizations, moisture content, tensile strength, biodegradation, and morphological structure of bioplastic films. Journal of Natural Fibers, 19 (16). pp. 12760-12771. ISSN 1544-0478

Roonjho, Shaheen Javed and Md Kamal, Rowshon and Roonjho, Abdul Rehman (2022) Modeling capillary wick irrigation system for greenhouse crop production. Agricultural Water Management, 274. art. no. 107927. pp. 1-8. ISSN 0378-3774; ESSN: 1873-2283

Roshan, Mohammad Jawed and A. Rashid, Ahmad Safuan and Abdul Wahab, Norshakila and Tamassoki, Sakina and Jusoh, Siti Norafida and Hezmi, Muhammad Azril and Nik Daud, Nik Norsyahariati and Mohd Apandi, Nazirah and Azmi, Mastura (2022) Improved methods to prevent railway embankment failure and subgrade degradation: a review. Transportation Geotechnics, 37. art. no. 100834. pp. 1-24. ISSN 2214-3912

Rozman, Azri Shahir and Hashim, Norhashila and Maringgal, Bernard and Abdan, Khalina (2022) A comprehensive review of stingless bee products: phytochemical composition and beneficial properties of honey, propolis, and pollen. Applied Sciences, 12 (13). art. no. 6370. pp. 1-27. ISSN 2076-3417

Rusdi, Mohammad Aliff and Nik Daud, Nik Norsyahariati (2022) Fly ash stabilized lateritic soil as subbase material: a review. Earth Sciences Malaysia, 6 (1). 15 - 23. ISSN 2521-5035; ESSN: 2521-5043

Rushdan, Ahmad Ilyas and Alias, Aisyah Humaira and Nordin, Abu Hassan and Ngadi, Norzita and Mohamed Yusoff, Mohd Zuhri and Muhammad Asyraf, Muhammad Rizal and Salit, Mohd Sapuan and Zainudin, Edi Syams and Sharma, Shubham and Abral, Hairul and Mochamad Asrofi, . and Syafri, Edi and Nasmi Herlina Sari, . and Mazlan, Rafidah and Syed Zakaria, Sharifah Zarina and Razman, Muhammad Rizal and Abd Majid, Nuriah and Ramli, Zuliskandar and Azmi, Ashraf and Bangar, Sneh Punia and Ibrahim, Rushdan (2022) Natural-fiber-reinforced chitosan, chitosan blends and their nanocomposites for various advanced applications. Polymers, 14 (5). art. no. 874. pp. 1-36. ISSN 2073-4360

Ruslan, Rashidah and Bejo, Siti Khairunniza and Jahari, Mahirah and Ibrahim, Mohd Firdaus (2022) Weedy rice classification using image processing and a machine learning approach. Agriculture, 12 (5). pp. 1-15. ISSN 2077-0472

S

S., M. Sapuan and M., M. Harussani (2022) Effect of incorporation of sugar palm (Arenga Pinnata [Wurmb] Merr.) fiber from various geographical regions towards the tensile and flexural properties of SPF/epoxy composites for engineering applications. Polymer Composites, 43 (7). 4408 - 4416. ISSN 0272-8397

S., Rahmam and M. N., Naim and N. F. A., Bakar and M. N., Mokhtar (2022) Atomisation of nanometre-scaled jasmine flower extracts using electrospray method. International Food Research Journal, 29 (3). art. no. 17. 659 - 666. ISSN 2231-7546

Sabbar, Al Rubaiawi Huda Mohammed (2022) Zirconium oxide nanoparticle-reinforced aluminium alloy (AA7075) matrix composites via hot extrusion and equal channel angular pressing. Doctoral thesis, Universiti Putra Malaysia.

Sabo, Aliyu and Abdul Wahab, Noor Izzri and Othman, Mohammad Lutfi (2022) Optimal design of multi-machine power system damping controller using neuro-fuzzy controller based stabilizer. In: 2022 4th International Conference on Smart Power & Internet Energy Systems (SPIES 2022), 9-12 Dec. 2022, Beijing, China. (pp. 1506-1511).

Sabo, Aliyu and Kolapo, Bashir Yunus and Odoh, Theophilus Ebuka and Dyari, Musa and Abdul Wahab, Noor Izzri and Veerasamy, Veerapandiyan (2022) Solar, wind and their hybridization integration for multi-machine power system oscillation controllers optimization: a review. Energies, 16 (1). art. no. 24. pp. 1-33. ISSN 1996-1073

Sabo, Aliyu and Yunus, Bashir and Sani, Eeman and Nwachukwu, Matthew and Auta, Daniel and Danladi, Abdulkadir and Mordi, Michael and Aliyu, Nura and David, Yammai and Oluwadamilare, Paul (2022) PID controller tuning performance evaluation for an isolated power system. In: 2022 IEEE International Conference on Power Systems Technology (POWERCON), 12-14 Sept. 2022, Kuala Lumpur, Malaysia. .

Sabrina, Jaeman and Nurulhuda, Khairudin and Mohd Amin, Adibah and Sulaiman, Muhammad Firdaus and Che Man, Hasfalina (2022) Exploring use of a commercial passive sampler in a closed static chamber to measure ammonia volatilization. Environmental Pollution, 315. pp. 1-7. ISSN 0269-7491; ESSN: 1873-6424

Sachit, Mourtadha Sarhan and Mohd Shafri, Helmi Zulhaidi and Abdullah, Ahmad Fikri and Mohd Rafie, Azmin Shakrine and Gibril, Mohamed Barakat A. (2022) Global spatial suitability mapping of wind and solar systems using an explainable aI-based approach. ISPRS International Journal of Geo-Information, 11 (8). art. no. 422. pp. 1-26. ISSN 2220-9964

Sadeque, Md. Golam and Yusoff, Zubaida and Hashim, Shaiful Jahari and Mohd Marzuki, Azah Syafiah and Lees, Jonathan and Fitzpatrick, Dominic (2022) Design of wideband continuous class-F power amplifier using low pass matching technique and harmonic tuning network. IEEE Access, 10. 92571 - 92582. ISSN 2169-3536

Saeed, Mohammed R. and Imran, Rasool M. and Alwez, Mustafa Abo and Flaih, Firas M. F. and Habib, Habib Ur Rahman (2022) Improved PV control that considers charging restrictions of lithium-ion battery. In: 2022 IEEE International Conference on Power and Energy (PECon2022), 5-6 Dec. 2022, Langkawi, Kedah, Malaysia. (pp. 209-212).

Saifuddin, Muhammad Firdaus Umar and Ash’aari, Zulfa Hanan and Aris, Ahmad Zaharin and Diyana, Zed (2022) GIS-based risk assessment of tropical surface water pollution by integrating hydrogeological and anthropogenic parameters. Human and Ecological Risk Assessment: An International Journal, 29 (3-4). pp. 651-678. ISSN 1080-7039; ESSN: 1549-7860

Saleh, Najiyah and Azis, Norhafiz and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Talib, Mohd Aizam (2022) Paper lifetime mathematical modelling based on multi pre-exponential factors for oil-immersed transformer. Pertanika Journal of Science and Technology, 30 (2). pp. 1115-1133. ISSN 0128-7680; ESSN: 2231-8526

Salem Ali, Algathia and Ali, Salem and Abdullah, Abdul Rashid and Mohamed, Rosmah and Yee, Choy Leong (2022) The relationship between leadership - members exchange and organisational commitment in Saudi Arabia healthcare sector. Academy of Entrepreneurship Journal, 27 (spec.5). pp. 1-15. ISSN 1087-9595; ESSN: 1528-2686

Sali, Aduwati and Wali, Sangin Qahtan and Osman, Anwar Faizd (2022) Evaluation of RF-EMF exposure for sub-6GHz 5G NR massive MIMO base station. In: 2022 IEEE 6th International Symposium on Telecommunication Technologies (ISTT), 14-16 Nov. 2022, Johor Bahru, Malaysia. (pp. 16-21).

Salman, Shahad Dawood (2022) Flexural behaviour of rubberised self-compacting ferro cement. Masters thesis, Universiti Putra Malaysia.

Salman Dawood, Sarmad Dawood and Harmin, Mohammad Yazdi (2022) Structural responses of a conceptual microsatellite structure incorporating perforation patterns to dynamic launch loads. Aerospace, 9 (8). pp. 1-25. ISSN 2226-4310

Sarmani, Abdul Rahman and Al-Alimi, Abdulmoghni Ali Wazae and Yusoff, N. Mohd and Mahdi, Mohd Adzir (2022) Spectral broadening in tight confinement geometry of a random fiber laser. Optical and Quantum Electronics, 55 (8). pp. 1-15. ISSN 0306-8919; ESSN: 1572-817X

Sedan, Mohd Fazri (2022) Modelling the dynamics and control system of hybrid airship UAV (HAU-3). Masters thesis, Universiti Putra Malaysia.

Segaran, Ramyah and Omar, Rozita and Kusumastuti, Yuni and Harun, Razif and Mustafa Kamal, Siti Mazlina (2022) Combined microwave-assisted subcritical liquid extraction of chitosan from crab shell waste. Progress on Chemistry and Application of Chitin and its Derivatives (PCACD), 27. 204 - 216. ISSN 1896-5644

Selamat, Nur Asmiza and Md. Ali, Sawal Hamid and Minhad, Khairun Nisa’ and Ahmad, Siti Anom and Sampe, Jahariah (2022) A novel peak detection algorithm using particle swarm optimization for chew count estimation of a contactless chewing detection. IEEE Transactions on Instrumentation and Measurement, 71. art. no. 9512712. pp. 1-12. ISSN 0018-9456; ESSN: 1557-9662

Selamat, Siti Nur Suhaidah and Che Me, Rosalam and Ahmad Ainuddin, Husna and S. F. Salim, Mazatulfazura and Ramli, Hafiz Rashidi and Romli, Muhammad Hibatullah (2022) The application of technological intervention for stroke rehabilitation in Southeast Asia: a scoping review with stakeholders' consultation. Frontiers in Public Health, 9. art. no. 783565. pp. 1-12. ISSN 2296-2565

Selva, A. M. and Azis, N. and Yousof, M. F. M. and Sallehuddin, N. and Tadam, A. B. and Saliang, A. D. (2022) Off-line partial discharge measurement and localization for a 33/6.9 kV in-service transformer. In: 2022 9th International Conference on Condition Monitoring and Diagnosis (CMD), 13-18 Nov. 2022, Kitakyushu, Japan. (pp. 505-508).

Sengodan, Papathy (2022) An overview of vertical farming: highlighting the potential in Malaysian high-rise buildings. Pertanika Journal of Science and Technology, 30 (2). pp. 949-981. ISSN 0128-7680; ESSN: 2231-8526

Sh, M. Sarmast and George, S. and Awang Biak, Dayang Radiah and Hoey, D. and Abdullah, N. and Kamarudin, S. (2022) Synthesis of bioactive glass using cellulose nano fibre template. Journal of the Mechanical Behavior of Biomedical Materials, 130. art. no. 105174. pp. 1-12. ISSN 1751-6161

Shaharuddin, Mohd Izwan and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Abdul Rahman, Mohamed (2022) Handgrip automotive prototype of polypropylene reinforced benzoyl treated kenaf and sugar palm fibers: a facile flexural strength and hardness studies. Applied science and engineering progress, 15 (spec.2). pp. 1-11. ISSN 2672-9156; ESSN: 2673-0421

Shahrim, Muhamad Azim and Harmin, Mohammad Yazdi and Romli, Fairuz Izzuddin and Chia, Chen Ciang and Jung-Ryul, Lee (2022) Damage visualization based on frequency shift of single-mode ultrasound-guided wavefield. Journal of Aeronautics, Astronautics and Aviation, 54 (3). art. no. 7. 297 - 306. ISSN 1990-7710

Shaikh, Irfan Ahmed and Wayayok, Aimrun and Mangrio, Munir Ahmed and Alhussain, Ziyad Ali and Chandio, Farman Ali and Ahmed Khan, Zaheer and Asghar Khan, Waseem and Mohammed, Mogtaba and Elbashir, Murtada K. and Rahman, Jamshaid Ul (2022) Optimizing approach of water allocation to off takes during reduced flows. Water Resources Management, 36 (3). 891 - 913. ISSN 0920-4741; ESSN: 1573-1650

Shalghum, Khaled M. and Noordin, Nor K. and Sali, Aduwati and Hashim, Fazirulhisyam (2022) Worst-case latency analysis for AVB traffic under overlapping-based time-triggered windows in time-sensitive networks. IEEE Access, 10. pp. 43187-43208. ISSN 2169-3536

Shamsi, Suhaili and Abdul Ghafor, Ahmad Ashraful Hadi and Norjoshukrudin, Nur Hazwani and Ng, Ida May Jen and Abdullah, Siti Nur Sharmila and Sarchio, Seri Narti Edayu and Md Yasin, Faizah and Abd Gani, Shafinaz and Mohd Desa, Mohd Nasir (2022) Stability, toxicity, and antibacterial potential of Gallic Acid-Loaded Graphene Oxide (gago) against methicillin-resistant Staphylococcus Aureus (MRSA) strains. International Journal of Nanomedicine, 17. 5781 - 5807. ISSN 1176-9114; ESSN: 1178-2013

Shamsudin, Rosnah and Ariffin, Siti Hajar and Zainol, Wan Nor Zanariah and Azmi, Nazatul Shima and Abdul Halim, Arinah Adila (2022) Quality evaluation of color and texture of the Dabai fruit (Canarium odontophyllum Miq.) at different temperatures and times of blanching. Pertanika Journal of Science and Technology, 30 (4). 2427 - 2438. ISSN 0128-7680; eISSN: 2231-8526

Sharif Himmat, Abdelrazig and Zhahir, Amzari and Md Ali, Syaril Azrad and Ahmad, Mohamed Tarmizi (2022) Unmanned aerial vehicle assisted localization using multi-sensor fusion and ground vehicle approach. Journal of Aeronautics Astronautics and Aviation, 54 (3). 251 - 260. ISSN 1990-7710

Sheh Omar, Nur Alia and Irmawati, Ramli and Fen, Yap Wing and Muhamad, Ernee Noryana and Kamal Eddin, Faten Bashar and Anas, Nur Ain Asyiqin and Md Ramdzan, Nur Syahira and Muhamad Fauzi, Nurul Illya and Mahdi, Mohd Adzir (2022) Surface refractive index sensor based on titanium dioxide composite thin film for detection of cadmium ions. Measurement, 187. art. no. 110287. pp. 1-9. ISSN 0263-2241

Shinde, Avinash and Siva, I. and Munde, Yashwant and Sankar, I. and Sultan, Mohamed Thariq Hameed and Mustapha, Faizal and Shahar, Farah Syazwani and Najeeb, Muhammad Imran (2022) The impacts of graphene dosage on the friction and wear performance of a graphene-reinforced silicone rubber nano composite. Journal of Materials Research and Technology, 21. pp. 1570-1580. ISSN 2238-7854; ESSN: 2214-0697

Shinde, Avinash Sudam and Siva, Irulappasamy and Munde, Yashwant and Hameed Sultan, Mohamed Thariq and Lee, Seng Hua and Shahar, Farah Syazwani (2022) Numerical modelling of drilling of fiber reinforced polymer matrix composite: a review. Journal of Materials Research and Technology, 20. pp. 3561-3578. ISSN 2238-7854; ESSN: 2214-0697

Shu, Wen Oo and Sabli, Nordin and Siajam, Shamsul Izhar (2022) Study on ball milling duration effect of N-doped graphene for PEMFC application. Journal of Applied Science and Engineering, 26 (4). 539 - 546. ISSN 1560-6686

Silva, Filipa Vinagre Marques and Sulaiman, Alifdalino (2022) Control of enzymatic browning in strawberry, apple, and pear by physical food preservation methods: comparing ultrasound and high-pressure inactivation of Polyphenoloxidase. Foods, 11 (13). art. no. 1942. pp. 1-12. ISSN 2304-8158

Singh, Manmit Singh Jasbeer and Abdul Jalil, Nawal Aswan and Abdul Rahim, Sharafiz and Zulkefli, Zamir Aimaduddin and Hasini, Hasril (2022) Thermo-economic analysis of a Coal-Fired Power Plant (CFPP) using turbine cycle heat rate and plant net heat rates at various operating loads. Pertanika Journal of Science and Technology, 30 (2). pp. 1003-1018. ISSN 0128-7680; ESSN: 2231-8526

Singh, Spoorthi and Zuber, Mohammad and Hamidon, Mohd Nizar and Mazlan, Norkhairunnisa and Basri, Adi Azriff and Ahmad, Kamarul Arifin (2022) Classification of actuation mechanism designs with structural block diagrams for flapping-wing drones: a comprehensive review. Progress in Aerospace Sciences, 132. art. no. 100833. 201 - 220. ISSN 0376-0421

Siow, Chun Lim and Tuan Mohamad, Tuan Haziq Arif and Gomes, Chandima and Wan Ahmad, Wan Fatinhamamah (2022) On the application of hollow conductor as electrical earthing electrode. International Journal of Integrated Engineering, 14 (6). pp. 184-193. ISSN 2229-838X; ESSN: 2600-7916

Sirajudeen, Abdurrasheed Olayinka and Law, Teik Hua and Wong, Shaw Voon and Ng, Choy Peng (2022) The motorcycle deaths to passenger car deaths ratio and economic performance: a panel data analysis. Accident Analysis & Prevention, 165. art. no. 106533. pp. 1-9. ISSN 0001-4575

Soh, Wei Siang and Rashid, Raizal S.M. and Amran, Mugahed and Alengaram, U. Johnson (2022) Structural behavior of piles under vehicular collision load on bridge substructure – a case study. Case Studies in Construction Materials, 16. art. no. 00936. pp. 1-22. ISSN 2214-5095

Soltani, Soroush and Khanian, Nasrin and Shojaei, Taha Roodbar and Shean, Thomas Yaw Choong and Asim, Nilofar (2022) Fundamental and recent progress on the strengthening strategies for fabrication of polyacrylonitrile (PAN)-derived electrospun CNFs: precursors, spinning and collection, and post-treatments. Journal of Industrial and Engineering Chemistry, 110. 329 - 344. ISSN 1226-086X; ESSN: 1876-794X

Soltani, Soroush and Shojaei, Taha Roodbar and Khanian, Nasrin and Shean, Thomas Yaw Choong and Asim, Nilofar and Yue, Zhao (2022) Artificial neural network method modeling of microwave-assisted esterification of PFAD over mesoporous TiO2‒ZnO catalyst. Renewable Energy, 187. 760 - 773. ISSN 0960-1481

Sreekala, Aparna Ganapathy Vilasam and Ismail, Muhammad Heikal and Nathan, Vinod Kumar (2022) Biotechnological interventions in food waste treatment for obtaining valuea‘added compounds to combat pollution. Environmental Science and Pollution Research, 29 (42). pp. 62755-62784. ISSN 1614-7499

Suliano, Salami Bahariah and Ahmad, Siti Azfanizam and As’arry, Azizan and Abdul Aziz, Faieza (2022) An ergonomics study and Rapid Upper Limb Assessments (RULA) for a car interior to support limb disabled drivers. Journal of Management Science & Engineering Research, 5 (2). 17 - 30. ISSN 2630-4953

Sundang, Murni and Nurdin, Nur Sjanrah and Saalah, Sariah and Singam, Yamunah Jaibalah and Osman Al Edrus, Syeed SaifulAzry and Ismail, Noor Maizura and Sipaut, Coswald Stephen and Abdullah, Luqman Chuah (2022) Synthesis of jatropha-oil-based polyester polyol as sustainable biobased material for waterborne polyurethane dispersion. Polymers, 14 (18). art. no. 3715. pp. 1-15. ISSN 2073-4360

Supian, A. B. M. and Sapuan, S. M. and Jawaid, M. and Zuhri, M. Y. M. and Ilyas, R. A. and Syamsir, A. (2022) Crashworthiness response of filament wound kenaf/glass fibre-reinforced epoxy composite tubes with influence of stacking sequence under intermediate-velocity impact load. Fibers and Polymers, 23. 222 - 233. ISSN 1229-9197;ESSN: 1875-0052

Supian, N. A. M and Shah, N. N. A. K. and Shamsudin, R. and Sulaiman, A. (2022) Inactivation kinetics of Salmonella enterica serovar Typhimurium NCTC 12023 in Chokanan mango Mangifera indica L. fruit juice by aqueous ozone treatment. Food Research, 6 (2). 231 - 240. ISSN 2550-2166

Sutaji, Hadri Safwan and Haron, Nuzul Azam and Ales@Alias, Aidi Hizami and Hassim, Salihudin and Raja Ahmad Effendi, Raja Ahmad Azmeer (2022) Study of management of construction waste material in residential project in Malaysia: a review. Interdisciplinary Environmental Review (IER), 22 (3-4). pp. 1-6. ISSN 1521-0227; ESSN: 2042-6992

Syed Muhammad, Syed Malek and Harun, Razif (2022) Redesign identification criteria for major hazard installation in Malaysia. Process Safety Progress, 41 (S1). pp. 68-74. ISSN 1066-8527; ESSN: 1547-5913

T

T. T., Dele-Afolabi and M. A., Azmah Hanim and D. W., Jung and R. A., Ilyas and R., Calin and A. R., Nurul Izzah (2022) Rice husk as a pore-forming agent: impact of particle size on the porosity and diametral tensile strength of porous alumina ceramics. Coatings, 12 (9). art. no. 1259. pp. 1-12. ISSN 2079-6412

Tamassoki, Sakina and Nik Daud, Nik Norsyahariati and Mohd Jakarni, Fauzan and Mohd Kusin, Faradiella and A. Rashid, Ahmad Safuan and Roshan, Mohammad Jawed (2022) Performance evaluation of lateritic subgrade soil treated with lime and coir fibre-activated carbon. Applied Sciences, 12 (16). art. no. 8279. pp. 1-16. ISSN 2076-3417

Tamassoki, Sakina and Nik Daud, Nik Norsyahariati and Mohd Jakarni, Fauzan and Mohd. Kusin, Faradiella and A. Rashid, Ahmad Safuan and Roshan, Mohammad Jawed (2022) Compressive and shear strengths of coir fibre reinforced activated carbon stabilised lateritic soil. Sustainability, 14 (15). art. no. 9100. pp. 1-18. ISSN 2071-1050

Tan, Kar Chun (2022) Development of elastomeric bearing utilizing steel core with granular and polymer filler system for structures and bridges. Doctoral thesis, Universiti Putra Malaysia.

Tan, Wei Jian and Ban, Zhen Hong and Chen, Bing Hui and Kim, Kek Seong and Siwayanan, Parthiban and Choong, Thomas S. Y. and Lau, Kok Keong (2022) Enhanced mitigation of fire and explosion risks due to hydrogen leakage using targeted nitrogen nozzle spray approach. ACS Chemical Health & Safety, 29 (3). 309 - 318. ISSN 1878-0504

Tanis, Naci Arda and Okur, Onur and Jafaar, Che Nor Aiza and Mohamed Ariff, Azmah Hanim and Recep, Çalin (2022) Investigation on the wear behaviour and properties of RHA reinforced 7075 aluminium t6 composites produced by vacuum infiltration. Malaysian Journal of Microscopy, 18 (2). pp. 10-22. ISSN 1823-7010; ESSN: 2600-7444

Tarique, J. and Sapuan, S. M. and Zainudin, E. S. and Khalina, A. and Ilyas, R. A. (2022) Degradation behaviour of arrowroot fibre (Maranta Arundinacea) Reinforced arrowroot starch biocomposite films. Journal of Research in Nanoscience and Nanotechnology, 5 (1). 98 - 102. ISSN 2773-6180

Tarique, J. and Zainudin, E. and Sapuan, S. and Ilyas, R. and Khalina, A. (2022) Physical, mechanical, and morphological performances of arrowroot (Maranta arundinacea) fiber reinforced arrowroot starch biopolymer composites. Polymers, 14 (3). art. no. 388. pp. 1-27. ISSN 2073-4360

Tarique, Jamal and Salit, Mohd Sapuan and Abdan, Khalina (2022) Extraction and characterization of a novel natural lignocellulosic (bagasse and husk) fibers from arrowroot (Maranta arundinacea). Journal of Natural Fibers, 19 (15). 9914 - 9930. ISSN 1544-0478; ESSN: 1544-046X

Tarique, Jamal and Salit, Mohd Sapuan and Khalina, Abdan and Ilyas, R. A. and Zainudin, Edi Syams (2022) Thermal, flammability, and antimicrobial properties of arrowroot (Maranta arundinacea) fiber reinforced arrowroot starch biopolymer composites for food packaging applications. International Journal of Biological Macromolecules, 213. pp. 1-10. ISSN 0141-8130

Tay, Chai Hua and Mazlan, Norkhairunnisa and Wayayok, Aimrun and Basri, Mohd Salahuddin and Mustafa, Mohd and Abdullah, Albakri (2022) Nanocellulose reinforced zeolite based geopolymer concrete: density analysis through response surface methodology. Materials Today: Proceedings, 66 (5). 2873 - 2882. ISSN 2214-7853

Tengku Yasim-Anuar, Tengku Arisyah and Yee-Foong, Lawrence Ng and Lawal, Abubakar Abdullahi and Ahmad Farid, Mohammed Abdillah and Mohd Yusuf, Mohd Zulkhairi and Hassan, Mohd Ali and Ariffin, Hidayah (2022) Emerging application of biochar as a renewable and superior filler in polymer composites. RSC Advances, 12 (22). 13938 - 13949. ISSN 2046-2069

Thian, Owen Seng Yeo and Mohd Yusof, Mohd Johari and Maruthaveeran, Sreetheran and Mohd Shafri, Helmi Zulhaidi and Saito, Kei and Lee, Bak Yeo (2022) ABC of green infrastructure analysis and planning: the basic ideas and methodological guidance based on landscape ecological principle. Urban Forestry and Urban Greening, 73. art. no. 127600. pp. 1-13. ISSN 1618-8667

Thulasi, M. and Faieza, A. A. and Azfanizam, A. S. and Leman, Z. (2022) State of the art of dynamic value stream mapping in the manufacturing industry. Journal of Modern Manufacturing Systems and Technology JMMST, 6 (1). 41 - 52. ISSN 2636-9575

Tuan Rohadi, T. N. and Ridzuan, M. J. M. and Abdul Majid, M. S. and Sulaiman, M. H. (2022) Biodegradability of bioplastic film using different regions of Pennisetum purpureum incorporated with gelatine and chitosan. International Journal of Environmental Science and Technology, 20. pp. 10313-10324. ISSN 1735-1472; ESSN: 1735-2630

U

Umair, Muhammad (2022) Development of Kenaf bast fiber-based insulation paper for power transformer applications. Doctoral thesis, Universiti Putra Malaysia.

Umelo, Nnamdi H. and Noordin, Nor K. and A. Rasid, Mohd Fadlee and Geok, Tan K. and Hashim, Fazirulhisyam (2022) Grouping based radio frequency identification anti-collision protocols for dense internet of things application. International Journal of Electrical and Computer Engineering, 12 (6). 5848 - 5860. ISSN 2088-8708; ESSN: 2722-2578

Umi Shahira and Islam, Syed Zahurul and Omar, Rosli and Othman, Mohammad Lutfi and Said, Said Zakaria and Uddin, Jasim (2022) Electrical design of solar-powered recreational boat in Malaysia. In: 2022 IEEE International Conference on Power and Energy (PECon2022), 5-6 Dec. 2022, Langkawi, Kedah, Malaysia. (pp. 138-143).

V

Veerasamy, Veerapandiyan and Abdul Wahab, Noor Izzri and Ramachandran, Rajeswari and Othman, Mohammad Lutfi and Hizam, Hashim and Kumar, Jeevitha Satheesh and Irudayaraj, Andrew Xavier Raj (2022) Design of single- and multi-loop self-adaptive PID controller using heuristic based recurrent neural network for ALFC of hybrid power system. Expert Systems with Applications, 192. art. no. 116402. pp. 1-17. ISSN 0957-4174

Venigalla, Sanjay Gokul and Abu Bakar, Nabilah and Mohd Nasir, Noor Azline and Safiee, Nor Azizi and Abd Aziz, Farah Nora Aznieta (2022) Textile-reinforced concrete as a structural member: a review. Buildings, 12 (4). art. no. 474. pp. 1-22. ISSN 2075-5309

W

Wali, Sangin Qahtan and Sali, Aduwati and Allami, Jaafar K. and Faizd, Anwar (2022) Rf-emf exposure measurement for 5g over mm-wave base station with mimo antenna. IEEE, 10. 9048- 9058. ISSN 2169-3536

Wan Mohd Zain, Wan Azimin and Nik Ali, N. H. and Hamdan, M. A. and Azis, N. and Johari, D. and Rameli, Norhidayu (2022) The effect of the ambient temperature profile in the determination of power cable ratings. In: 2022 IEEE International Conference on Power Systems Technology (POWERCON), 12-14 Sept. 2022, Kuala Lumpur, Malaysia. .

Wen, Dong and Li, Rou and Tang, Hao and Liu, Yijun and Wan, Xianglong and Dong, Xianling and Saripan, M. Iqbal and Lan, Xifa and Song, Haiqing and Zhou, Yanhong (2022) Task-state EEG signal classification for spatial cognitive evaluation based on multiscale high-density convolutional neural network. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 30. 1041 - 1051. ISSN 1558-0210

Wen, Dong and Xu, Jian and Wu, Zhonglin and Liu, Yijun and Zhou, Yanhong and Li, Jingjing and Wang, Shaochang and Dong, Xianlin and Saripan, M. Iqbal and Song, Haiqing (2022) The effective cognitive assessment and training methods for COVID-19 patients with cognitive impairment. Frontiers in Aging Neuroscience, 13. art. no. 827273. pp. 1-6. ISSN 1663-4365

Wong, Sui Kieng and Abu Bakar, Nabilah and Safiee, Nor Azizi and Mohd. Nasir, Noor Azline (2022) Parametric study in shear buckling capacity of sinusoidal corrugated steel web. ASEAN Engineering Journal, 12 (3). pp. 89-93. ISSN 2586–9159

X

Xiong, Xusheng and Li, Qiang and Ge, Xiaohu and Sali, Aduwati and Mohd Ali, Borhanuddin (2022) Power allocation optimization for oam-mimo systems with unaligned antennas. IEEE Wireless Communications Letters, 11 (7). pp. 1523-1527. ISSN 2162-2337; ESSN: 2162-2345

Y

Ya'acob, Mohammad Effendy and Lu, Li and Anuar, Shamsul and Mohtar, Mohd Nazim and Othman, Noor Fadzlinda and Zabidin, Zamzuri and Hizam, Hashim (2022) Impacts of PV module distribution in large scale solar infrastructures. In: 2022 IEEE International Conference on Power and Energy (PECon2022), 5-6 Dec. 2022, Langkawi, Kedah, Malaysia. (pp. 127-131).

Ya'acob, Mohammad Effendy and Othman, Noor Fadzlinda and Nazri, Nur Aisha (2022) On the light intensity value under photovoltaic arrays for agrivoltaic integration. In: 2022 IEEE International Conference on Power and Energy (PECon2022), 5-6 Dec. 2022, Langkawi, Kedah, Malaysia. (pp. 122-126).

Yahya, Liyana and Harun, Razif and Zainal, Afifi and Farahin, Abd Wahab (2022) Evaluation of bioactive compounds from robust consortium microalgae species under actual flue gas exposure. Biochemical Engineering Journal, 190. art. no. 108739. pp. 1-9. ISSN 1369-703X; eISSN: 1873-295X

Yahya, Nor Affendy (2022) Spacecraft formation flying responsive mission optimum Delta-V and ground performance measures. Doctoral thesis, Universiti Putra Malaysia.

Yahya, Nor Affendy and Varatharajoo, Renuganth and Harithuddin, A. S. M. and Razoumny, Yury (2022) Delta-V and ground metric investigations for responsive satellite formation flying. Acta Astronautica, 193. 20 - 34. ISSN 0094-5765

Yamin, Muhammad and Wan Ismail, Wan Ishak and Abd Aziz, Samsuzana and Mohd Kassim, Muhamad Saufi and Akbar, Farah Naz and Ibrahim, Muhammad (2022) Design considerations of variable rate liquid fertilizer applicator for mature oil palm trees. Precision Agriculture, 23 (4). pp. 1413-1448. ISSN 1385-2256; ESSN: 1573-1618

Ya’acob, Mohammad Effendy and Li, Lu and Nobilly, Frisco and Che’Ya, Nik Norasma and Abdul Aziz, Ammar and Dupraz, Christian and Yahya, Muhammad Syafiq and Sharifah Nur Atikah and Al. Mamun, Mohammad Abdullah (2022) Analysis of weed communities in solar farms located in tropical areas—the case of Malaysia. Agronomy, 12 (12). art. no. 3073. pp. 1-19. ISSN 2073-4395

Yidris, Noorfaizal and Osman, Iman Syahirah and Gires, Ezanee (2022) Influence of shear direction on the buckling of CFRP composite perforated plate. Forces in Mechanics, 9. art. no. 100146. pp. 1-6. ISSN 2666-3597

Yong, Lai Zhi and Bejo, Siti Khairunniza and Jahari, Mahirah and Muharam, Farrah Melissa (2022) Automatic disease detection of basal stem rot using deep learning and hyperspectral imaging. Agriculture, 13 (1). art. no. 69. pp. 1-16. ISSN 2077-0472

Yu, H. L. and Chen, B. H. and Kim, K. S. and Siwayanan, P. and Thomas Choong, S. Y. and Ban, Z .H. (2022) Source localization for illegal plastic burning in Malaysia via CFD-ANN approach. Digital Chemical Engineering, 3. art. no. 100029. pp. 1-19. ISSN 1385-8947

Yuen, Mei Keng Facing a new Covid-19 wave. in The Star, (10 July 2022), p. 12. (Call Number: 2022/07-050)

Yusaf, Talal and Fernandes, Louis and Abu Talib, Abd Rahim and Altarazi, Yazan S. M. and Alrefae, Waleed and Kadirgama, Kumaran and Ramasamy, Devarajan and Jayasuriya, Aruna and Brown, Gordon and Mamat, Rizalman and Al Dhahad, Hayder and F., Benedict and Laimon, Mohamd (2022) Sustainable aviation—hydrogen is the future. Sustainability, 14 (1). art. no. 548. pp. 1-17. ISSN 2071-1050

Yusof, Nur Syahadah and Mohamed, Mohamed Fauzi Packeer and Ghazali, Nor Azlin and Jalaludin Khan, Muhammad Firdaus Akbar and Shaari, Safizan and Mohtar, Mohd Nazim (2022) Evolution of solution-based organic thin-film transistor for healthcare monitoring- from device to circuit integration: a review. Alexandria Engineering Journal, 61 (12). 11405 - 11431. ISSN 1110-0168; ESSN: 2090-2670

Z

Zabidi, Nurul 'Afifah and Nazri, Farhana and Mohamed Amin Tawakkal, Intan Syafinaz and Mohd Basri, Mohd Salahuddin and Kadir Basha, Roseliza and Othman, Siti Hajar (2022) Characterization of active and pH-sensitive poly(lactic acid) (PLA)/nanofibrillated cellulose (NFC) films containing essential oils and anthocyanin for food packaging application. International Journal of Biological Macromolecules, 212. 220 - 231. ISSN 0141-8130

Zaid, Hiba and Al-sharify, Zainab and Hamzah, Muhammad Hazwan and Rushdi, Salih (2022) Optimization of different chemical processes using response surface methodology -a review. Journal of Engineering and Sustainable Development, 26 (6). pp. 1-13. ISSN 2520-0917; ESSN: 2520-0925

Zainal, Afifi and Harun, Razif and Idrus, Syazwani (2022) Performance monitoring of anaerobic digestion at various organic loading rates of commercial Malaysian food waste. Frontiers in Bioengineering and Biotechnology, 10. pp. 1-12. ISSN 2296-4185

Zainal Abidin, Muhammad Harith (2022) Model development of essential lean manufacturing methods on sustainable performance in Malaysian manufacturing firms. Doctoral thesis, Universiti Putra Malaysia.

Zainal Abidin, Muhammad Harith and Leman, Zulkiflle and Mohd Yusof, Zainal Abidin and Ismail, Md Yusof (2022) Scrutinizing the impact of essential lean methods on sustainable performance in Malaysian manufacturing firms. Jurnal Teknologi, 84. art. no. 5. pp. 11-25. ISSN 0127-9696; eISSN: 2180-3722

Zainal Abidin, Muhammad Harith and Leman, Zulkiflle and Mohd Yusof, Zainal Abidin and Khalili, Amjad (2022) Lean impact on manufacturing productivity: a case study of industrialized building system (IBS) manufacturing factory. Jurnal Teknologi, 84 (4). 65 - 77. ISSN 0127-9696; ESSN: 2180-3722

Zainan, Nur Hidayah Binti and Harun, Razif and Kamal, Siti Mazlina Mustapa and Sapardi, Mohd Azan Mohammed (2022) Profile of amino acids production from microalgae Nannochloropsis sp. biomass using subcritical water technology. Asean Journal of Chemical Engineering, 22 (1). pp. 178-195. ISSN 1655-4418; ESSN: 2655-5409

Zainol, Ismail and Zainurin, Mira Azah Najihah and Abu Bakar, Nurul Hidayah and Jaafar, Che Nor Aiza and Mudhafar, Mustafa (2022) Characterisation of porous hydroxyapatite beads prepared from fish scale for potential bone filler applications. Malaysian Journal of Microscopy, 18 (2). art. no. 5. 48 - 57. ISSN 1823-7010; ESSN: 2600-7444

Zakaria, N.A. and Ishak, M.R. and Mustapha, F. and Yidris, N. (2022) Tensile properties of a hybrid kenaf-glass fibre composite shaft. Materials Today: Proceedings, 74 (pt.3). pp. 492-498. ISSN 2214-7853

Zakaria, Noor Syamilah and Subarimaniam, Neerushah and Wan Jaafar, Wan Marzuki and Mohd Ayub, Ahmad Fauzi and Saripan, M. Iqbal (2022) Conceptualization and initial measurement of counseling ethics competency: the influence of spirituality and self-efficacy. European Journal of Training and Development, 46 (3/4). 285 - 301. ISSN 2046-9012

Zakaria, Siti Maisurah and Mustapa Kamal, Siti Mazlina and Harun, Mohd Razif and Omar, Rozita and Siajam, Shamsul Izhar (2022) Extraction of phenolic compounds from Chlorella sp. microalgae using pressurized hot water: kinetics study. Biomass Conversion and Biorefinery, 12. 2081 - 2089. ISSN 2190-6815; ESSN: 2190-6823

Zaludin, Zairil A. (2022) Sensor and process noises reduction using a Luenberger state estimator with a stability augmentation system for a Hypersonic Transport Aircraft. Asian Review of Mechanical Engineering, 11 (1). pp. 40-52. ISSN 2249-6289

Zareianjahromi, Seyed Arash (2022) Design of self-compensated rectifier with auxiliary circuit for radio frequency energy-harvesting applications. Masters thesis, Universiti Putra Malaysia.

Zareianjahromi, Seyed Arash and Kamsani, Noor Ain and Rokhani, Fakhrul Zaman and Mohd Sidek, Roslina and Hashim, Shaiful Jahari (2022) A 1 V -21 dBm threshold voltage compensated rectifier for radio frequency energy harvesting. Indonesian Journal of Electrical Engineering and Computer Science, 27 (1). 28 - 36. ISSN 2502-4752; ESSN: 2502-4760

Zawawi, Nur Aribah Fatini and Md. Hazmi, Nurul Ashikin and How, Muhammad Syahmeer and Kantono, Kevin and Silva, Filipa V. M. and Sulaiman, Alifdalino (2022) Thermal, high pressure, and ultrasound inactivation of various fruit cultivars’ polyphenol oxidase: kinetic inactivation models and estimation of treatment energy requirement. Applied Sciences, 12 (4). art. no. 1864. pp. 1-19. ISSN 2076-3417

Zermane, Abderrahim and Mohd Tohir, Mohd Zahirasri and Baharudin, Mohd Rafee and Mohamed Yusoff, Hamdan (2022) Risk assessment of fatal accidents due to work at heights activities using fault tree analysis: case study in Malaysia. Safety Science, 151. art. no. 105724. pp. 1-12. ISSN 0925-7535

Zhang, Chi and Xu, Binyue and Jasni, Jasronita and Mohd Radzi, Mohd Amran and Azis, Norhafiz and Zhang, Qi (2022) Model control and digital implementation of the three phase interleaved parallel bidirectional Buck-Boost converter for new energy electric vehicles. Energies, 15 (19). art. no. 7178. pp. 1-24. ISSN 1996-1073

Zheng, Guanchao and Mohd Ariffin, Mohd Khairol Anuar and Ahmad, Siti Azfanizam and Abdul Aziz, Nuraini and Wen, Xu (2022) A novel progressive response surface method for high-order polynomial metamodel. Journal of Physics: Conference Series, 2224. art. no. 12045. pp. 1-12. ISSN 1742-6596

Zolfagharnassab, Shahrzad and Mohamed Shariff, Abdul Rashid and Ehsani, Reza and Jaafar, Hawa Ze and Aris, Ishak (2022) Classification of oil palm fresh fruit bunches based on their maturity using thermal imaging technique. Agriculture, 12 (11). art. no. 1779. pp. 1-20. ISSN 2077-0472

Zulkifli, Nurazwin (2022) Modelling of puncture responses in papaya using finite element analysis. Doctoral thesis, Universiti Putra Malaysia.

This list was generated on Mon Dec 23 12:19:30 2024 +08.