Items where Division is "Institute of Tropical Forestry and Forest Products" and Year is 2021

Abdul Wahab, Zulfa and Kamarudin, Norizah and Omar, Hamdan and Ibrahim, Faridah Anum and Parman, Rhyma Purnamasayangsukasih and Anwar, Fitrianto (2021) Spectral signature analysis to determine mangrove species delineation structured by anthropogenic effects. Ecological Indicators, 130. pp. 1-12. ISSN 1470-160X; ESSN: 1872-7034

Abidin, Nuraizat and Ismail, Siti Izera and Vadamalai, Ganesan and Yusof, Mohd Termizi and Hakiman, Mansor and Karam Singh, Daljit Singh and Zulperi, Dzarifah (2021) Pathogenic variability of the jackfruit-bronzing bacterium Pantoea stewartii subspecies stewartii infection to jackfruit varieties and its pivotal plant hosts in Malaysia. Agronomy, 11 (11). art. no. 2113. pp. 1-26. ISSN 2073-4395

Abu Talib, Anis Adilah and Jumahat, Aidah and Jawaid, Mohammad and Sapiai, Napisah and Leao, Alcides Lopes (2021) Effect of wear conditions, parameters and sliding motions on tribological characteristics of basalt and glass fibre reinforced epoxy composites. Materials, 14 (3). art. no. 701. pp. 1-18. ISSN 1996-1944

Adzmi, Fariz and Musa, Mohamed Hanafi and Siddiqui, Yasmeen and Wong, Mui Yun and Abdul Hamid, Hazandy and Abdu, Arifin and Abiri, Rambod (2021) Development of alginate-montmorillonite-starch with encapsulated Trichoderma harzianum and evaluation of conidia shelf life. International Journal of Agriculture And Biology, 26 (1). 87 - 96. ISSN 1560–8530; ESSN:1814–9596

Ahmad Jani, Hamzad Fahmi and Meder, Roger and Abdul Hamid, Hazandy and Mohd Razali, Sheriza and Mohd Yusoff, Khairul Hafiz (2021) Near infrared spectroscopy of plantation forest soil nutrients in Sabah, Malaysia, and the potential for microsite assessment. Journal of Near Infrared Spectroscopy, 29 (3). 148 - 157. ISSN 0967-0335; ESSN: 1751-6552

Ahmad Saffian, Harmaen and Yamaguchi, Masayuki and Ariffin, Hidayah and Abdan, Khalina and Kassim, Nur Kartinee and Lee, Seng Hua and Lee, Ching Hao and Shafi, Ayu Rafiqah and Alias, Aisyah Humairah (2021) Thermal, physical and mechanical properties of polybutylene succinate/kenaf core fibers composites reinforced with esterified lignin. Polymers, 13 (14). art. no. 2359. pp. 1-16. ISSN 2073-4360

Ahmad Zahid, Nisar and Jaafar, Hawa Z. E. and Hakiman, Mansor (2021) Alterations in Microrhizome induction, shoot multiplication and rooting of Ginger (Zingiber officinale Roscoe) var. Bentong with regards to sucrose and plant growth regulators application. Agronomy-Basel, 11 (2). art. no. 320. pp. 1-14. ISSN 2073-4395

Alhaji, Ibrahim Abubakar and Abbas, Zulkifly and Mohd Zaid, Mohd Hafiz and Khamis, Ahmad Mamoun (2021) Effects of particle size on the dielectric, mechanical, and thermal properties of recycled borosilicate glass-filled PTFE microwave substrates. Polymers, 13 (15). pp. 1-15. ISSN 2073-4360

Ali, Md. Rowson and Abdullah, Ummi Hani and Ashaari, Zaidon and Hamid, Norul Hisham and Lee, Seng Hua (2021) Hydrothermal modification of wood: a review. Polymers, 13 (16). pp. 1-18. ISSN 2073-4360

Alias, Aisyah Humaira and Mohd Nurazzi, Norizan and Sabaruddin, Fatimah Athiyah and Muhammad Rizal, Muhammad Asyraf and Mohd Nor Faiz, Norrrahim and Ilyas, Ahmad Rushdan and Kuzmin, Anton M. and Rayung, Marwah and Shazleen, Siti Shazra and Nazrin, Asmawi and Shah Faisal Khan, Sherwani and Moklis, Muhammad Harussani and Mahamud, Siti Nur Atikah and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Khalina, Abdan (2021) Hybridization of MMT/lignocellulosic fiber reinforced polymer nanocomposites for structural applications: a review. Coatings, 11 (11). pp. 1-42. ISSN 2079-6412

Alothman, Othman Y. and Jawaid, Mohammad and Senthilkumar, K. and Chandrasekar, M. and Alshammari, Basheer A. and Fouad, H. and Hashem, Mohamed and Siengchin, Suchart (2021) Thermal characterization of date palm/epoxy composites with fillers from different parts of the tree. Journal of Materials Research and Technology, 9 (6). 15537- 15546. ISSN 2238-7854; ESSN: 2214-0697

Alothman, Othman Y. and Shaikh, Hamid M. and Alshammari, Basheer A. and Mohammad Jawaid, . (2021) Structural, morphological and thermal properties of nano Filler produced from date palm-based micro (fibers phoenix dactylifera L.). Journal of Polymers and the Environment, 30 (2). pp. 622-630. ISSN 1566-2543; ESSN:1572-8919

Alruwais, Raja Saad and Adeosun, Waheed A. and Marwani, Hadi M. and Jawaid, Mohammad and Asiri, Abdullah M. and Khan, Anish (2021) Novel aminosilane (APTES)-grafted polyaniline@graphene oxide (PANI-GO) nanocomposite for electrochemical sensor. Polymers, 13 (15). art. no. 2562. pp. 1-16. ISSN 2073-4360

Alsafrani, Amjad E. and Adeosun, Waheed A. and Marwani, Hadi M. and Khan, Imran and Jawaid, Mohammad and Asiri, Abdullah M. and Khan, Anish (2021) Efficient synthesis and characterization of Polyaniline@Aluminium–succinate metal-organic frameworks nanocomposite and its application for Zn(II) ion sensing. Polymers, 13 (19). pp. 1-21. ISSN 2073-4360

Alwi, Agustan and Meder, Roger and Japarudin, Yani and A Hamid, Hazandy and Sanusi, Ruzana and Mohd Yusoff, Khairul H. (2021) Near infrared spectroscopy of Eucalyptus pellita for foliar nutrients and the potential for real-time monitoring of trees in fertiliser trial plots. Journal of Near Infrared Spectroscopy, 29 (3). pp. 158-167. ISSN 0967-0335; ESSN: 1751-6552

Amri, Mohamad Ridzuan and Chuah, Teong Guan and Al-Edrus, Syeed Saifulazry Osman and Md Yasin, Faizah and Mohamad, Siti Fatahiyah (2021) Effect of cellulose nanofibrils on the properties of Jatropha oil-based waterborne polyurethane nanocomposite film. Polymers, 13 (9). pp. 1-14. ISSN 2073-4360

Amri, Mohamad Ridzuan and Md Yasin, Faizah and Abddulah, Luqman Chuah and Osman Al-Edrus, Syeed SaifulAzry and Mohamad, Siti Fatahiyah (2021) Ternary nanocomposite system composing of graphene nanoplatelet, cellulose nanofiber and jatropha oil based waterborne polyurethane: characterizations, mechanical, thermal properties and conductivity. Polymers, 13 (21). pp. 1-17. ISSN 2073-4360

Anish Khan and Mohammad Jawaid and Lau, Kia Kian and Parwaz Khan, Aftab Aslam and M. Asiri, Abdullah (2021) Isolation and production of nanocrystalline cellulose from conocarpus fiber. Polymers, 13 (11). art. no. 1835. pp. 1-11. ISSN 2073-4360

Anugerah, Adhe Rizky and Ahmad, Siti Azfanizam and Samin, Razali and Samdin, Zaiton and Kamaruddin, Norfaryanti (2021) Modified failure mode and effect analysis to mitigate sustainable related risk in the palm oil supply chain. Advances in Materials and Processing Technologies, 8 (2). pp. 2229-2243. ISSN 2374-068X; ESSN: 2374-0698

Anwar, Murniwati and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Abdul Halin, Izhal and Abdullah, Mohd Na'im and Hassim, Mohamad Iswady and Mustapha, Mazli (2021) Damage identification on impact and lightning damage of flax composite laminates (Linum usitatissimum) using long-pulse thermography of a low-resolution infrared camera. Frontiers in Materials, 8. pp. 1-16. ISSN 2296-8016

Ashraf, Waqas and Ishak, Mohamad Ridzwan and Mohamed Yusoff, Mohd Zuhri and Yidris, Noorfaizal and Ya'acob, Abdul Malek (2021) Effect on mechanical properties by partial replacement of the glass with alkali-treated flax fiber in composite facesheet of sandwich structure. Journal of Materials Research and Technology-JMR&T, 13. 89 - 98. ISSN 2238-7854; ESSN: 2214-0697

Ashraf, Waqas and Ishak, Mohamad Ridzwan and Mohamed Yusoff, Mohd Zuhri and Yidris, Noorfaizal and Ya'acob, Abdul Malek (2021) Experimental Investigation on the mechanical properties of a sandwich structure made of flax/glass hybrid composites facesheet and honeycomb core. International Journal of Polymer Science, 2021. art. no. 8855952. pp. 1-10. ISSN 1687-9422; ESSN: 1687-9430

Asim, Mohammad and Jawaid, Mohammad and Fouad, Hassan and Alothman, Othman Y. (2021) Effect of surface modified date palm fibre loading on mechanical, thermal properties of date palm reinforced phenolic composites. Composite Structures, 267. art. no. 113913. pp. 1-8. ISSN 0263-8223

Asrofi, Mochamad and Salit, Mohd Sapuan and Ilyas, R. A. and M., Ramesh (2021) Characteristic of composite bioplastics from tapioca starch and sugarcane bagasse fiber: Effect of time duration of ultrasonication (Bath-Type). Materials Today Communications, 46 (pt. 4). 1626 - 1630. ISSN 2352-4928

Aziman, Nurain and Jawaid, Mohammad and Abdul Mutalib, Noor Azira and Yusof, Noor Liyana and A. H., Nadrah and U. K., Nazatul and V. V., Tverezovskiy and O. A., Tverezovskaya and H., Fouad and R. M., Braganca and P. W., Baker and S., Selbie and A., Ali (2021) Antimicrobial potential of plastic films incorporated with sage extract on chicken meat. Foods, 10 (11). art. no. 2812. pp. 1-17. ISSN 2304-8158

Aziman, Nurain and Lau, Kia Kian and Jawaid, Mohammad and Sanny, Maimunah and Alamery, Salman (2021) Morphological, structural, thermal, permeability and antimicrobial activity of PBS and PBS/TPS films incorporated with Biomaster-silver for food packaging application. Polymers, 13 (3). art. no. 391. pp. 1-15. ISSN 2073-4360

Azman Husni, Ainur Ainiah and Ismail, Siti Izera and Md Jaafar @ Ahmad Jaafar, Noraini and Zulperi, Dzarifah (2021) Current classification of the Bacillus pumilus group species, the rubber-pathogenic bacteria causing trunk Bulges disease in Malaysia as assessed by MLSA and multi rep-PCR approaches. Plant Pathology Journal, 37 (3). pp. 243-257. ISSN 1598-2254

Azman Husni, Ainur Ainiah and Ismail, Siti Izera and Md Jaafar @ Ahmad Jaafar, Noraini and Zulperi, Dzarifah (2021) Etiology, diagnostic approaches and management strategies of Acidovorax citrulli, a bacterial fruit blotch pathogen of cucurbits. Plant Protection Science, 57 (2). 75 - 94. ISSN 1212-2580; ESSN: 1805-9341

Azum, Naved and Jawaid, Mohammad and Lau, Kia Kian and Khan, Anish and Alotaibi, Maha Moteb (2021) Extraction of microcrystalline cellulose from Washingtonia fibre and its characterization. Polymers, 13 (18). pp. 1-13. ISSN 2073-4360

Badaluddin, Noor Atiqah and Lion, Marryanna and Mohd Razali, Sheriza and Khalit, Saiful Iskandar (2021) Seasonal variations of soil moisture regime at dry region of lowland dipterocarp forest in Pasoh forest reserve, Peninsular Malaysia. Bioscience Research, 18 (spec.2). 26 - 33. ISSN 1811-9506; ESSN: 2218-3973

Bhat, Aayush and Naveen, Jesu and Jawaid, Mohammad and M. N. F., Norrrahim and Rashedi, Ahmad and Khan, Anish (2021) Advancement in fiber reinforced polymer, metal alloys and multi-layered armour systems for ballistic applications – a review. Journal of Materials Research and Technology-JMR&T, 15. 1300 - 1317. ISSN 2238-7854

Budholiya, Sejal and Bhat, Aayush and Raj, S. Aravind and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Basri, Adi A. (2021) State of the art review about bio-inspired design and applications: an aerospace perspective. Applied Sciences, 11 (11). pp. 1-23. ISSN 2076-3417

Chin, Kit Ling and H'ng, Paik San and Lee, Chuan Li and Wong, Wan Zhen and Go, Wen Ze and Khoo, Pui San and Abdullah, Luqman Chuah and Ashaari, Zaidon (2021) Application strategies by selective medium treated with entomopathogenic bacteria Serratia marcescens and Pseudomonas aeruginosa as potential biocontrol against Coptotermes curvignathus. Royal Society Open Science, 8 (4). pp. 1-16. ISSN 2054-5703

De Silva, Catrenar and Mohammad Nawawi, Norazah and Abd Karim, Murni Marlina and Abd Gani, Shafinaz and Masarudin, Mas Jaffri and Gunasekaran, Baskaran and Ahmad, Siti Aqlima (2021) The mechanistic action of biosynthesised silver nanoparticles and its application in aquaculture and livestock industries. Animals, 11 (7). art. no. 2097. pp. 1-18. ISSN 2076-2615

Ebadi, Seyed Eshagh and Ashaari, Zaidon and Jawaid, Mohammad (2021) Optimization and empirical modelling of physical ‎properties of hydrothermally treated ‎oil ‎palm wood in ‎different ‎buffered media using ‎response ‎surface ‎methodology. BioResources, 16 (1). 2385 - 2405. ISSN 1930-2126

Espey, Manuel (2021) Influence of genetics, growth and environment on end-grain splitting of Eucalyptus pellita F. Muell. and effectiveness of split remediation methods. Masters thesis, Universiti Putra Malaysia.

Faisal Khan, Sherwani Shah and Salit, Mohd Sapuan and Leman, Zulkiflle and Zainudin, Edi Syams and Abdan, Khalina (2021) Effect of alkaline and benzoyl chloride treatments on the mechanical and morphological properties of sugar palm fiber-reinforced poly(lactic acid) composites. Textile Research Journal, 92 (3-4). pp. 1-33. ISSN 0040-5175; ESSN: 1746-7748

Gomez, Javier Chavarro and Zakaria, Rabitah and Min, Min Aung and Mokhtar, Mohd Noriznan and Yunus, Robiah (2021) Synthesis and characterization of polyurethanes from residual palm oil with high poly-unsaturated fatty acid oils as additive. Polymers, 13 (23). art. no. 4214. pp. 1-18. ISSN 2073-4360

Hachaichi, Amina and Kouini, Benalia and Lau, Kia Kian and Asim, Mohammad and Fouad, Hassan and Jawaid, Mohammad and Sain, Mohini (2021) Nanocrystalline cellulose from microcrystalline cellulose of date palm fibers as a promising candidate for bio-nanocomposites: isolation and characterization. Materials, 14 (18). art. no. 5313. pp. 1-13. ISSN 1996-1944

Hamdan, Nor Salwa (2021) Conceptual design and life cycle assessment of natural fibre-reinforced biopolymer composites takeout food container using concurrent engineering. Doctoral thesis, Universiti Putra Malaysia.

Hamdan, Nor Salwa and Salit, Mohd Sapuan and Mohammad Taha, Mastura and Mohamed Yusoff, Mohd Zuhri (2021) Conceptual design and selection of Natural Fibre Reinforced Biopolymer Composite (NFBC) takeout food container. Journal of Renewable Materials, 9 (4). 803 - 827. ISSN 2164-6325; ESSN: 2164-6341

Hanadi, Sawalha and Abiri, Rambod and Sanusi, Ruzana and Shaharuddin, Noor Azmi and Mohamad Noor, Aida Atiqah and Ab Shukor, Nor Aini and Abdul Hamid, Hazandy and Ahmad, Siti Aqlima (2021) Towards a better understanding of metal nanoparticles, a novel strategy from eucalyptus plant. Plants, 10 (5). pp. 1-22. ISSN 2223-7747

Haris, Nur Izzah Nabilah and Ilyas, R. A. and Hassan, Mohamad Zaki and Salit, Mohd Sapuan and Afdzaluddin, Atiqah and Jamaludin, Khairur Rijal and Zaki, Sheikh Ahmad and Ramlie, Faizir (2021) Dynamic mechanical properties and thermal properties of longitudinal basalt/woven glass fiber reinforced unsaturated polyester hybrid composites. Polymers, 13 (19). pp. 1-14. ISSN 2073-4360

Haron, Nor Azidawati and Yusuf, Badronnisa and Nurhidayu, Siti and Sulaiman, Mohd Sofiyan and Ab Razak, Mohd Shahrizal (2021) Features and geomorphic response of mountainous river by reach scale. Lecture Notes in Civil Engineering, 132. pp. 66-73. ISSN 2366-2557,2366-2565

Harussani, M.m. and Sapuan, S.m. and Rashid, Umer and Khalina, A. and Ilyas, R.A. (2021) Pyrolysis of polypropylene plastic waste into carbonaceous char: priority of plastic waste management amidst COVID-19 pandemic. Science of the Total Environment, 803. art. no. 149911. pp. 1-16. ISSN 0048-9697; ESSN: 1879-1026

Hashiguchi, Yuya and Zakaria @ Mamat, Mohd Rafein and Toshinari, Maeda and Mohd Yusoff, Mohd Zulkhairi and Shirai, Yoshihito and Hassan, Mohd Ali (2021) Ecotoxicological assessment of palm oil mill effluent final discharge by zebrafish (Danio rerio) embryonic assay. Environmental Pollution, 277. art. no. 116780. pp. 1-10. ISSN 0269-7491

Hashim, Mohd Khairul Rabani and Abdul Majid, Mohd Shukry and Mohd Jamir, Mohd Ridzuan and Kasim, Farizul Hafiz and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Ahmad, Kamarul Arifin and Basri, Adi Azriff (2021) The effect of stacking sequence on fatigue behaviour of hybrid pineapple leaf fibre/carbon-fibre-reinforced epoxy composites. Polymers, 13 (22). art. no. 3936. pp. 1-16. ISSN 2073-4360

Ibrahim, Nor Izaida and Shahar, Farah Syazwani and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Safri, Syafiqah Nur Azrie and Mat Yazik, Muhamad Hasfanizam (2021) Overview of bioplastic introduction and its applications in product packaging. Coatings, 11 (11). art. no. 1423. pp. 1-23. ISSN 2079-6412

Ishak, Muhamad and Ahmad Razi, Norhisham and Thomas, Stephen M. and Abu Bakar, Siti Nurhidayu and Ghazali, Amal and Md Sharif, Badrul Azhar (2021) Physicochemical properties as driver of Odonata diversity in oil palm waterways. Frontiers in Forests and Global Change, 4. art. no. 613064. pp. 1-13. ISSN 2624-893X

Ismail, Ahmad Safwan and Jawaid, Mohammad and Hamid, Norul Hisham and Yahaya, Ridwan and Hassan, Azman (2021) Mechanical and morphological properties of bio-phenolic/epoxy polymer blends. Molecules, 26 (4). art. no. 773. 01-11. ISSN 1420-3049

Jaafar, Adila Mohamad and Hasnu, Norafida and Zainal, Zulkarnain and Masarudin, Mas Jaffri and Md. Ajat, Mohd Mokrish and Aung, Min Min and Rayung, Marwah (2021) Preparation, characterisation and antibacterial activity of carvacrol encapsulated in gellan gum hydrogel. Polymers, 13 (23). art. no. 4153. pp. 1-14. ISSN 2073-4360

Jalil, Abd Majid and Abdul Hamid, Hazandy and Mohamad Ali, Nor Azah and Mohamed, Johar (2021) Allometric models for estimating aboveground biomass and carbon stock in planted <em>aquilaria malaccensis </em>stand. Journal of Tropical Forest Science, 33 (3). 240 - 246. ISSN 0128-1283

Jamian, Syari and Samsudin, Siti Asma' and Tan Shilan, Mohamad Syukri and Wan Mohd Adnan, Wan Nur Asiah and Adam, Nur Azura and Chong, Leong Puan (2021) Foraging activities of stingless bees, Geniotrigona Thoracica and Heterotrigona Itama Apidae: Meliponini in relation to wet and dry seasons in Selangor, Malaysia. Serangga, 26 (4). pp. 152-160. ISSN 1394-5130

Jawaid, Mohammad and Lau, Kia Kian and Fouad, H. and Saba, N. and Alothman, Othman Y. and Hashem, Mohamed (2021) Morphological, structural, and thermal analysis of three part of Conocarpus cellulosic fibres. Journal of Materials Research and Technology, 10. 24 - 33. ISSN 2238-7854; ESSN: 2214-0697

Kamairudin, Norsuhaili and Seng, Soi Hoong and Abdullah, Luqman Chuah and Ariffin, Hidayah and Awang Biak, Dayang Radiah (2021) Optimisation of epoxide ring-opening reaction for the synthesis of bio-polyol from palm oil derivative using response surface methodology. Molecules, 26 (3). art. no. 648. pp. 1-21. ISSN 1420-3049

Kamaruddin, Zatil Hazrati and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Jumaidin, Ridhwan (2021) Effect of plasticizers on physical, thermal, and tensile properties of thermoplastic films based on Dioscorea hispida starch. International Journal of Biological Macromolecules, 185. 219 - 228. ISSN 0141-8130

Kamaruddin, Zatil Hazrati and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Jumaidin, Ridhwan (2021) Extraction and characterization of potential biodegradable materials based on Dioscorea hispida tubers. Polymers, 13 (4). pp. 1-19. ISSN 2073-4360

Khalid, Farah Eryssa and Ahmad, Siti Aqlima and Zakaria, Nur Nadhirah and Shaharuddin, Noor Azmi and Sabri, Suriana and Azmi, Alyza Azzura and Abdul Khalil, Khalilah and Verasoundarapandian, Gayathiri and Gomez-Fuentes, Claudio and Zulkharnain, Azham (2021) Application of Cogon Grass (Imperata cylindrica) as biosorbent in diesel-filter system for oil spill removal. Agronomy-Basel, 11 (11). art. no. 2273. pp. 1-16. ISSN 2073-4395

Khamis, Ahmad Mamoun and Abbas, Zulkifly and Azis, Raba'ah Syahidah and Mensah, Ebenezer Ekow and Alhaji, Ibrahim Abubakar (2021) Effects of recycled Fe2O3 nanofiller on the structural, thermal, mechanical, dielectric, and magnetic properties of PTFE matrix. Polymers, 13 (14). pp. 1-20. ISSN 2073-436

Khoo, Pui San (2021) Properties of laminated veneer lumber produced from small diameter rubber logs. Doctoral thesis, Universiti Putra Malaysia.

Khoo, Pui San and Chin, Kit Ling and Lee, Chuan Li and H’ng, Paik San and Mohd Sahfani, Mohd Nor Hafizuddin (2021) Effect of glue spreads on the structural properties of laminated veneer lumber from spindleless rotary veneers recovered from short rotation hevea plantation logs. Polymers, 13 (21). art. no. 3799. pp. 1-17. ISSN 2073-4360

Lau, Kia Kian and Jawaid, Mohammad and Alamery, Salman and Vaseashta, Ashok (2021) Fabrication and characterization of Novel PolyD-lactic acid nanocomposite membrane for water filtration purpose. Nanomaterials, 11 (2). pp. 1-10. ISSN 2079-4991

Lawal, Abubakar Abdullahi and Hassan, Mohd Ali and Zakaria @ Mamat, Mohd Rafein and Mohd Yusoff, Mohd Zulkhairi and Norrrahim, Mohd Nor Faiz and Mokhtar, Mohd Noriznan and Shirai, Yoshihito (2021) Effect of oil palm biomass cellulosic content on nanopore structure and adsorption capacity of biochar. Bioresource Technology, 332. art. no. 125070. pp. 1-7. ISSN 0960-8524; ESSN: 1873-2976

Lee, Ching Hao and Abdan, Khalina and Norizan, Mohd Nurazzi and Abdullah, Norli and M., M. Harussani and Shafi, Ayu Rafiqah and Alias, Aisyah Humaira and Ramli, Natasha (2021) The challenges and future perspective of Kenaf Wo-ven reinforcement in thermoset polymer composites in Malaysia: a review. Polymers, 13 (9). art. no. 1390. pp. 1-17. ISSN 2073-4360

Lee, Chuan Li and Chin, K. L. and H’ng, Paik San and Rashid, Umer and Maminski, M. and Khoo, Pui San (2021) Effect of pretreatment conditions on the chemical–structural characteristics of coconut and palm kernel shell: A potentially valuable precursor for eco-efficient activated carbon production. Environmental Science and Technology, 21. art. no. 101309. pp. 1-16. ISSN 2352-1864

Lee, Chuan Li and Chin, Kit Ling and H'ng, Paik San and Khoo, Pui San and Abdullah, Luqman Chuah (2021) Enhanced properties of single-layer particleboard made from oil palm empty fruit bunch fibre with additional water-soluble additives. BioResources, 16 (3). pp. 6159-6173. ISSN 1930-2126

Lee, Seng Hua and Osman Al-Edrus, Syeed SaifulAzry and Faris Hakimi, Nik Muhammad and Wei, Chun Lum and Mohamad, Siti Fatahiyah and Park, Byung-Dae and Azmi, Anis (2021) Surface modified nanocellulose and its reinforcement in natural rubber matrix nanocomposites: a review. Polymers, 13 (19). art. no. 3241. pp. 1-24. ISSN 2073-4360

Loganathan, Tamil Moli and Hameed Sultan, Mohamed Thariq and Ahsan, Qumrul and Jawaid, Mohammad and Naveen, Jesuarockiam and Md Shah, Ain Umaira and Abu Talib, Abd. Rahim and Basri, Adi Azriff and Jaafar, Che Nor Aiza (2021) Effect of Cyrtostachys renda fiber loading on the mechanical, morphology, and flammability properties of multi-walled carbon nanotubes/phenolic bio-composites. Nanomaterials, 11 (11). pp. 1-25. ISSN 2079-4991

Loganathan, Tamil Moli and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Ahsan, Qumrul and Naveen, Jesuarockiam and Md Shah, Ain Umaira and Abu Talib, Abd. Rahim and Basri, Adi Azriff (2021) Physical, mechanical, and morphological properties of hybrid Cytostachys renda/kenaf fiber reinforced with multi-walled carbon nanotubes MWCNT-phenolic composites. Polymers, 13 (19). art. no. 3448. pp. 1-18. ISSN 2073-4360

Lourdes, Karen T. and Gibbins, Chris N. and Hamel, Perrine and Sanusi, Ruzana and Azhar, Badrul and Lechner, Alex Mark (2021) A review of urban ecosystem services research in Southeast Asia. Land, 10 (1). art. no. 40. pp. 1-21. ISSN 2073-445X

Lu Lu, Taung Mai and Min Min, Aung and Muhamad Saidi, Sarah Anis and H’ng, Paik San and Rayung, Marwah and Mohamad Jaafar, Adila (2021) Non edible oil-based epoxy resins from jatropha oil and their shape memory behaviors. Polymers, 13 (13). art. no. 2177. pp. 1-12. ISSN 2073-4360

M. J., Suraini and Mohd Radzi, Fathin Sakinah and R. A., Ilyas and Petrů, Michal and Salit, Mohd Sapuan and C. M., Ruzaidi (2021) Flammability, tensile and morphological properties of oil palm empty fruit bunches fibre/ pet yarn reinforced epoxy fibre retardant hybrid polymer composites. Polymers, 13 (8). art. no. 1282. pp. 1-18. ISSN 2073-4360

M. J., Suriani and Zainudin, Hasliana Asyikin and Ilyas, R. A. and Petrů, Michal and Salit, Mohd Sapuan and Ghazali, Che Mohd Ruzaidi and Mustapha, Rohani (2021) Kenaf fiber/pet yarn reinforced epoxy hybrid polymer composites: morphology, tensile and flammability properties. Polymers, 13 (9). art. no. 1532. pp. 1-18. ISSN 2073-4360

M. J., Suriania and Rapi, Hannah Zalifah and Ilyas, R. A. and Petrů, Michal and Salit, Mohd Sapuan (2021) Delamination and manufacturing defects in natural fiber-reinforced hybrid composite: a review. Polymers, 13 (8). pp. 1-24. ISSN 2073-4360

Maru, Ali and Haruna, Ahmed Osumanu and Primus, Walter Charles and Jeffary, Alicia Vanessa (2021) Dielectric response of nitrogen in soil amended with chicken litter biochar and urea under Oryza sativa L. cultivation. Scientific Reports, 11. art. no. 12545. pp. 1-10. ISSN 2045-2322

Masoud, Fathi and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Nukman, Y. and Bayraktar, Emin (2021) Experimental analysis of heat-affected zone HAZ in laser cutting of sugar palm fiber reinforced unsaturated polyester composites. Polymers, 13 (5). pp. 1-13. ISSN 2073-4360

Masoud, Fathi and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Nukman, Y. and Bayraktar, Emin (2021) Experimental analysis of kerf taper angle in cutting process of sugar palm fiber reinforced unsaturated polyester composites with laser beam and abrasive water jet cutting technologies. Polymers, 13 (15). pp. 1-24. ISSN 2073-4360

Mat Ariffin, Naziruddin and Jawaid, Mohammad and Yusof, Noor Liyana and Abdul Mutalib, Noor Azira and Ahmad, M. F. and Sanny, Maimunah and Alzahari, Amir (2021) Assessment and detection of the potential contaminants from oil palm empty fruit bunch fiber-based biodegradable tray. Food Packaging and Shelf Life, 29. art. no. 100685. pp. 1-13. ISSN 2214-2894

Mat Arisah, Fatini and Amir, Amirah Farhana and Ramli, Norhayati and Ariffin, Hidayah and Maeda, Toshinari and Hassan, Mohd Ali and Mohd Yusoff, Mohd Zulkhairi (2021) Bacterial resistance against heavy metals in Pseudomonas aeruginosa RW9 involving hexavalent chromium removal. Sustainability, 13 (17). art. no. 9797. pp. 1-11. ISSN 2071-1050

Mat Jusoh, Suriani and Salit, Mohd Sapuan and Ghazali, Che Mohd Ruzaidi and Jesuarockiam, Naveen and H., Syukriyah and M., Ziefarina (2021) Correlation of manufacturing defects and impact behaviors of kenaf fiber reinforced hybrid fiberglass/Kevlar polyester composite. Polimery, 66 (1). 30 - 35. ISSN 0032-2725

Mazlan, Norkhairunnisa and Tay, Chai Hua and Hameed Sultan, Mohamed Thariq and Abdan, Khalina (2021) Thermogravimetric and dynamic mechanical analysis of woven glass/kenaf/epoxy hybrid nanocomposite filled with clay. Advances in Materials and Processing Technologies, 7 (1). 166 - 179. ISSN 2374-068X; ESSN: 2374-0698

Mazlan, Safwan and Md Jaafar, Noraini and Wahab, Aswad and Sulaiman, Zulkefly and Rajandas, Heraa and Zulperi, Dzarifah (2021) Molecular characterization and phylogenetic analysis of Bacillus pumilus causing trunk bulges of RRIM 3001 superclone rubber tree in Malaysia. European Journal of Plant Pathology, 159. pp. 825-838. ISSN 0929-1873; ESSN: 1573-8469

Md Damiri, Mohamad Hazrol and Salit, Mohd Sapuan and Zainudin, Edi Syams and Mohamed Yusoff, Mohd Zuhri and Abdul Wahab, Noor Izzri (2021) Corn starch (Zea mays) biopolymer plastic reaction in combination with sorbitol and glycerol. Polymers, 13 (2). pp. 1-22. ISSN 2073-4360

Miniandi, Nirwani Devi and Sulaiman, Mohd Sofiyan and Zakaria, Razak and Mohd Razali, Sheriza and Jamil, Nor Rohaizah (2021) Morphometric analysis of the main river systems at Ulu Muda Forest Reserve, Kedah, Peninsular Malaysia. Malayan Nature Journal, 73 (3). 297 - 309. ISSN 0025-1291

Mohamad Zainal, Noor Shaidatul Lyana and Ramli, Norhayati and Zolkefli, Nurhasliza and Mustapha, Nurul Asyifah and Hassan, Mohd Ali and Maeda, Toshinari (2021) Survivability of Alcaligenaceae and Chromatiaceae as palm oil mill effluent pollution bioindicators under fluctuations of temperature, pH and total suspended solid. Journal of Bioscience and Bioengineering, 132 (2). 174 - 182. ISSN 1389-1723; ESSN: 1347-4421

Mohamed, Sity Ainy Nor and Zainudin, Edi Syams and Salit, Mohd Sapuan and Md. Deros, Mohd Azaman and Tajul Arifin, Ahmad Mubarak (2021) Crack growth analysis for rice husk reinforced polypropylene composite using equivalent initial flaw size concept. BioResources, 16 (3). 4963 - 4985. ISSN 1930-2126

Mohammed Sabbar, Huda and Leman, Zulkiflle and Shamsudin, Shazarel and Mohd Tahir, Suraya and Jaafar, Che Nor Aiza and Mohamed Ariff, Azmah Hanim and Zahari, Nur Ismarrubie and Rady, Mohammed H. (2021) The effect of solid-State processes and heat treatment on the properties of AA7075 aluminum waste recycling nanocomposite. Materials, 14 (21). art. no. 6667. pp. 1-20. ISSN 1996-1944

Mohd Basri, Mohd Salahuddin and Liew, Brenda Min Ren and A.Talib, Rosnita and Zakaria, Rabitah and Kamarudin, Siti Hasnah (2021) Novel mangosteen-leaves-based marker ink: color lightness, viscosity, optimized composition, and microstructural analysis. Polymers, 13 (10). art. no. 1581. pp. 1-18. ISSN 2073-4360

Mohd Basri, Mohd Salahuddin and Mohd Nor, Mohd Zuhair and Shamsudin, Rosnah and Mohamed Amin Tawakkal, Intan Syafinaz and Abdul Ghani, Nur Hamizah and Kamarudin, Khairul Manami and Mohd Mustafah, Anas (2021) Effects of different fluting medium geometries on von-mises stress and deformation in single fluted board: a three-dimensional finite element analysis. Advances in Agricultural and Food Research Journal, 2 (1). pp. 1-12. ISSN 2736-1799

Mohd Chachuli, Fairuz Suzana and Ahmad Ludin, Norasikin and Md Jedi, Muhamad Alias and Hamid, Norul Hisham (2021) Transition of renewable energy policies in Malaysia: benchmarking with data envelopment analysis. Renewable and Sustainable Energy Reviews, 150. art. no. 111456. pp. 1-16. ISSN 1364-0321

Mohd Isha, Nabila Syuhada and Mohd Kusin, Faradiella and Ahmad Kamal, Nurfakhira Meor and Syed Hasan, Sharifah Nur Munirah and Molahid, Verma Loretta M. (2021) Geochemical and mineralogical assessment of sedimentary limestone mine waste and potential for mineral carbonation. Environmental Geochemistry and Health, 43 (5). 2065 - 2080. ISSN 0269-4042; ESSN: 1573-2983

Mohd Nurazzi, Norizan and M. Asyraf, M. R. and Sabaruddin, Fatimah Athiyah and Shamsudin, Siti Shazra Shazleen and Shafi, Ayu Rafiqah and Moklis, Muhammad Harussani and Kamarudin, S. H. and Razman, M. R. and M., Rahmah and Zainudin, Edi Syams and Ilyas, R. A. and Alias, Aisyah Humaira and M. N. F., Norrrahim and Abdullah, N. and Salit, Mohd Sapuan and A., Khalina (2021) A review on mechanical performance of hybrid natural fiber polymer composites for structural applications. Polymers, 13 (13). art. no. 2170. pp. 1-59. ISSN 2073-4360

Mohd Nurazzi, Norizan and Muhammad Rizal, Muhammad Asyraf and Khalina, Abdan and Abdullah, Norli and Sabaruddin, Fatimah Athiyah and Kamarudin, Siti Hasnah and Ahmad, So’bah and Mahat, Annie Maria and Lee, Chuan Li and Alias, Aisyah Humaira and Norrrahim, Mohd Nor Faiz and Rushdan, Ahmad Ilyas and Moklis, Muhammad Harussani and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan (2021) Fabrication, functionalization, and application of carbon nanotube-reinforced polymer composite: an overview. Polymers, 13 (7). art. no. 1047. pp. 1-45. ISSN 2073-4360

Mohd Sahfani, Nor Hafizuddin and Lee, Chuan Li and Chin, Kit Ling and H’ng, Paik San and Khoo, Pui San and Rashid, Umer (2021) Fabrication of highly microporous structure activated carbon via surface modification with sodium hydroxide. Polymers, 13 (22). art. no. 3954. pp. 1-16. ISSN 2073-4360

Mohd Yusof, Siti Jamilah Hanim and Roslan, Ahmad Muhaimin and Zakaria, Mohd Rafein and Hassan, Mohd Ali and Shirai, Yoshihito (2021) Kinetics of xylan autohydrolysis during subcritical hydrothermal pretreatment of oil palm frond pressed fiber. BioEnergy Research, 1 (1). pp. 439-453. ISSN 1939-1234; ESSN: 1939-1242

Moklis, Muhammad Harussani and Salit, Mohd Sapuan and A. H. M., Firdaus and El-Badry, Yaser A. and Hussein, Enas E. and El-Bahy, Zeinhom M. (2021) Determination of the tensile properties and biodegradability of cornstarch-based biopolymers plasticized with sorbitol and glycerol. Polymers, 13 (21). pp. 1-12. ISSN 2073-4360

Mudri, Nurul Huda and Abdullah, Luqman Chuah and Min, Min Aung and Awang Biak, Dayang Radiah and Tajau, Rida (2021) Structural and rheological properties of nonedible vegetable oil-based resin. Polymers, 13 (15). art. no. 2490. pp. 1-18. ISSN 2073-4360

Mzek, Tareq and Samdin, Zaiton and W. Mohamad, Wan Norhidayah (2021) Assessing visitors' preferences and willingness to pay for the Malayan Tiger conservation in a Malaysian National Park: A choice experiment method. Ecological Economics, 191. art. no. 107218. pp. 1-9. ISSN 0921-8009

Najeeb, Muhammad Imran and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Muhammad Amir, Siti Madiha and Safri, Syafiqah Nur Azrie and Jawaid, Mohammad and Shari, Mohamad Rabaie (2021) Low velocity impact analysis of pineapple leaf fiber (PALF) hybrid composites. Polymers, 13 (18). art. no. 3194. pp. 1-18. ISSN 2073-4360

Najhah, Mat Yunus and Jaafar, Hawa Z. E. and Nakasha, Jaafar Juju and Hakiman, Mansor (2021) Shoot multiplication and callus induction of Labisia pumila var. alata as influenced by different plant growth regulators treatments and its polyphenolic activities compared with the wild plant. MOLECULES, 26 (11). art. no. 3229. Jan-15. ISSN 1431-5165; ESSN: 1420-3049

Naveen, Jesuarockiam and Jawaid, Mohammad and Kheng, Lim Goh and Reddy, Degalhal Mallikarjuna and Muthukumar, Chandrasekar and Loganathan, Tamil Moli and Reshwanth, Koduri Naga Ganapathy Lakshmi (2021) Advancement in graphene-based materials and their nacre inspired composites for armour applications—a review. Nanomaterials, 11 (5). art. no. 1239. pp. 1-17. ISSN 2079-4991

Nayak, Suhas Yeshwant and Shenoy, Satish and Hameed Sultan, Mohamed Thariq and Kini, Chandrakant R. and Seth, Aashna and Prabhu, Shrinivasa and Safri, Syafiqah Nur Azrie (2021) Effect of CNT-based resin modification on the mechanical properties of polymer composites. Frontiers in Materials, 7. art. no. 609010. pp. 1-35. ISSN 2296-8016

Nisar Ahmad, Zahid and Jaafar, Hawa Z. E. and Mansor, Mohd Hakiman (2021) Micropropagation of ginger (Zingiber officinale Roscoe) ‘Bentong’ and evaluation of its secondary metabolites and antioxidant activities compared with the conventionally propagated plant. Plants, 10 (4). art. no. 630. pp. 1-17. ISSN 2223-7747

Norizan, M. Nurazzi and Muhammad Rizal, M. Asyraf and M., Rayung and M. N., F. Norrrahim and S., S. Shazleen and M. S., A. Rani and Shafi, Ayu Rafiqah and Alias, Aisyah Humaira and M. H., M. Radzi and Sabaruddin, F. A. and R., A. Ilyas and Zainudin, E.dy Syams and Abdan, Khalina (2021) Thermogravimetric analysis properties of cellulosic natural fiber polymer composites: a review on influence of chemical treatments. Polymers, 13 (16). art. no. 2710. pp. 1-33. ISSN 2073-4360

Norrrahim, Mohd Nor Faiz and Ariffin, Hidayah and Tengku Yasim Anuar, Tengku Arisyah and Hassan, Mohd Ali and Ibrahim, Nor Azowa and Wan Yunus, Wan Md Zin and Nishida, Haruo (2021) Performance evaluation of cellulose nanofiber with residual hemicellulose as a nanofiller in polypropylene-based nanocomposite. Polymers, 13 (7). art. no. 1064. pp. 1-14. ISSN 2073-4360

Norrrahim, Mohd Nor Faiz and Muhammad Huzaifah, Muhammad Roslim and Ahmad Farid, Mohammed Abdillah and Shazleen, Siti Shazra and Mohamad Misenan, Muhammad Syukri and Tengku Yasim-Anuar, Tengku Arisyah and Naveen, Jesuarockiam and Mohd Nurazzi, Norizan and Rani, Mohd Saiful Asmal and Hakimi, Mohd Idham and Ahmad Ilyas, Rushdan and Jenol, Mohd Azwan (2021) Greener pretreatment approaches for the valorisation of natural fibre biomass into bioproducts. Polymers, 13 (17). art. no. 2971. pp. 1-26. ISSN 2073-4360

Nurazzi, N. M. and Sabaruddin, F. A. and Harussani, M. M. and Kamarudin, S. H. and Rayung, M. and Asyraf, M. R. M. and Aisyah, H. A. and Norrrahim, M. N. F. and Ilyas, R. A. and Abdullah, N. and Zainudin, E. S. and Sapuan, S. M. and Khalina, A. Khalina (2021) Mechanical performance and applications of CNTs reinforced polymer composites—a review. Nanomaterials, 11 (9). art. no. 2186. pp. 1-25. ISSN 2079-4991

Omran, Abdoulhdi A. Borhana and Mohammed, Abdulrahman A. B. A. and S., M. Sapuan and R., A. Ilyas and M. R., M. Asyraf and Seyed Saeid, Rahimian Koloor and Petrů, Michal (2021) Micro- and nanocellulose in polymer composite materials: a review. Polymers, 13 (2). art. no. 231. pp. 1-35. ISSN 2073-4360

Palanivell, Perumal and Ahmed, Osumanu Haruna and Omar, Latifah and Abdul Majid, Nik Muhamad (2021) Nitrogen, phosphorus, and potassium adsorption and desorption improvement and soil buffering capacity using clinoptilolite zeolite. Agronomy, 11 (2). art. no. 379. pp. 1-20. ISSN 2073-4395

Qiuyun, Liu and Ceri, Loxton and Mohamed, Amir Alzahari and Jawaid, Mohammad and Radek, Braganca and Robert, Elias (2021) Development of pulp moulded packaging samples from empty fruit bunch fibre. Pertanika Journal of Science & Technology, 29 (4). pp. 2901-2912. ISSN 0128-7680; ESSN: 2231-8526

R. A., Ilyas and M. Y., M. Zuhri and Norrrahim, Mohd Nor Faiz and Mohamad Misenan, Muhammad Syukri and Jenol, Mohd Azwan and Samsudin, Sani Amril and Nurazzi, N. M. and Asyraf, M. R. M. and Supian, A. B. M. and Bangar, Sneh Punia and Nadlene, R. and Sharma, Shubham and A. Borhana Omran, Abdoulhdi (2021) Natural fiber-reinforced polycaprolactone green and hybrid biocomposites for various advanced applications. Polymers, 14 (1). art. no. 182. pp. 1-28. ISSN 2073-4360

Rais, Mohd Rafsan and Bakar, Edi Suhaimi and Ashaari, Zaidon and Lee, Seng Hua and Soltani, Mojtaba and Ramli, Farid and Bawon, Paiman (2021) Drying performance, as well as physical and flexural properties of oil palm wood dried via the super-fast drying method. BioResources, 16 (1). 1674 - 1685. ISSN 1930-2126

Ramlee, Nor Azlina and Jawaid, Mohammad and Yamani, Shaikh Abdul Karim and Zainudin, Edi Syams and Alamery, Salman (2021) Effect of surface treatment on mechanical, physical and morphological properties of oil palm/bagasse fiber reinforced phenolic hybrid composites for wall thermal insulation application. Construction and Building Materials, 276. art. no. 122239. pp. 1-10. ISSN 0950-0618

Rasheed, Masrat and Jawaid, Mohammad and Parveez, Bisma (2021) Bamboo fiber based cellulose nanocrystals/poly(Lactic Acid)/Poly(Butylene Succinate) nanocomposites: morphological, mechanical and thermal properties. Polymers, 13 (7). art. no. 1076. pp. 1-15. ISSN 2073-4360

Rasheed, Masrat and Jawaid, Mohammad and Parveez, Bisma and Bhat, Aamir Hussain and Alamery, Salman (2021) Morphology, structural, thermal, and tensile properties of bamboo microcrystalline cellulose/poly(lactic acid)/poly(butylene succinate) composites. Polymers, 13 (3). art. no. 465. pp. 1-15. ISSN 2073-4360

Razali, Mohamad Omar Syafiq and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri (2021) Antimicrobial activity, physical, mechanical and barrier properties of sugar palm based nanocellulose/starch biocomposite films incorporated with cinnamon essential oil. Journal of Materials Research and Technology-JMR&T, 11. 144 - 157. ISSN 2238-7854

Rosli, Nadirah (2021) Perceptions of local community and visitors and their willingness to pay for firefly conservation in Kuala Selangor, Malaysia. Masters thesis, Universiti Putra Malaysia.

Rosli, Nadirah and Samdin, Zaiton and W Mohamad, Wan Norhidayah and Mohamad Muslim, Huda Farhana (2021) Determination of factor in willingness to pay for firefly conservation in Kuala Selangor, Malaysia using contingent valuation method. Serangga, 26 (2). 348 - 360. ISSN 1394-5130

Samdin, Zaiton and Abdullah, Siti Intan Nurdiana Wong and Khaw, Alfred and Subramaniam, Thanam (2021) Travel risk in the ecotourism industry amid Covid-19 pandemic: ecotourists' perceptions. Journal of Ecotourism, 21 (3). pp. 266-294. ISSN 1472-4049; ESSN: 1747-7638

Sanmuham, Vikneswari and Hameed Sultan, Mohamed Thariq and Ali, Mohd Radzi and Shamsuri, Ahmad Adlie and Md Shah, Ain Umaira and Safri, Syafiqah Nur Azrie and Basri, Adi Azriff (2021) Effect of silver nanopowder on mechanical, thermal and antimicrobial properties of kenaf/HDPE composites. Polymers, 13 (22). pp. 1-14. ISSN 2073-4360

Sapiai, Napisah and Jumahat, Aidah and Jawaid, Mohammad and Abu, Md Zin and Chalid, Mochamad (2021) Mechanical performance of granite fine fly dust-filled basalt/glass polyurethane polymer hybrid composites. Polymers, 13 (18). art. no. 3032. pp. 1-16. ISSN 2073-4360

Shafi, Ayu Rafiqah (2021) Characterization of oil palm (Elaeis guineensis Jacq.) empty fruit bunch fibre filled polybutylene succinate and tapioca starch biocomposites. Doctoral thesis, Universiti Putra Malaysia.

Shafi, Ayu Rafiqah and Abdan, Khalina and Harmaen, Ahmad Saffian and Mohamed Amin Tawakkal, Intan Syafinaz and Zaman, Khairul and Asim, Mohammad and Norizan, Mohd Nurazzi and Lee, Ching Hao (2021) A review on properties and application of bio-based poly(Butylene Succinate). Polymers, 13 (9). art. no. 1436. pp. 1-28. ISSN 2073-4360

Shah Faisal Khan, Sherwani and Salit, Mohd Sapuan and Leman, Zulkiflle and Zainudin, Edi Syams and Abdan, Khalina (2021) Physical, mechanical and morphological properties of sugar palm fiber reinforced polylactic acid composites. Fibers and Polymers, 22 (11). 3095 - 3105. ISSN 1229-9197; ESSN: 1875-0052

Shah Faisal Khan, Sherwani and Zainudin, Edi Syams and Salit, Mohd Sapuan and Leman, Zulkiflle and Abdan, Khalina (2021) Physical, mechanical, and morphological properties of treated sugar palm/glass reinforced poly(lactic acid) hybrid composites. Polymers, 13 (21). art. no. 3620. pp. 1-25. ISSN 2073-4360

Shahar, Farah Syazwani and Hameed Sultan, Mohamed Thariq and Safri, Syafiqah Nur Azrie and Jawaid, Mohammad and Abu Talib, Abd. Rahim and Basri, Adi Azriff and Md Shah, Ain Umaira (2021) Fatigue and impact properties of 3D printed PLA reinforced with kenaf particles. Journal of Materials Research and Technology-JMR&T, 16. 461 - 470. ISSN 2214-0697; ESSN: 2238-7854

Shaharuddin, Mohd Izwan and Salit, M. Sapuan and Mohamed Yusoff, M. Zuhri and Abdul Rahman, Mohamed (2021) Thermal stability and dynamic mechanical analysis of benzoylation treated sugar palm/kenaf fiber reinforced polypropylene hybrid composites. Polymers, 13 (17). art. no. 2961. pp. 1-18. ISSN 2073-4360

Shamsudin, Siti Shazra Shazleen (2021) Cellulose nanofiber as nucleating agent and reinforcement material in improving crystallization and mechanical properties of polylactic acid nanocomposites. Masters thesis, Universiti Putra Malaysia.

Shamsuri, Ahmad Adlie and Abdan, Khalina and Kaneko, Tatsuo (2021) The effect of imidazolium-based ionic liquids on the tensile properties of gellan gum/KCF biocomposite films - a prelude study. Asian Journal of Physical and Chemical Sciences, 9 (1). pp. 1-10. ISSN 2456-7779

Shamsuri, Ahmad Adlie and Daik, Rusli and Md. Jamil, Siti Nurul Ain (2021) A succinct review on the PVDF/Imidazolium-based ionic liquid blends and composites: Preparations, properties, and applications. Processes, 9 (5). art. no. 761. pp. 1-17. ISSN 2227-9717

Shamsuri, Ahmad Adlie and Md. Jamil, Siti Nurul Ain (2021) Application of quaternary ammonium compounds as compatibilizers for polymer blends and polymer composites—a concise review. Applied Sciences-Basel, 11 (7). art. no. 3167. pp. 1-16. ISSN 2076-3417

Shamsuri, Ahmad Adlie and Md. Jamil, Siti Nurul Ain and Abdan, Khalina (2021) The Impact of organic salts on the tensile properties of polymer biocomposites. International Journal of Advanced Engineering and Management Research, 6 (6). 152 - 160. ISSN 2456-3676

Shamsuri, Ahmad Adlie and Md. Jamil, Siti Nurul Ain and Abdan, Khalina (2021) A prelude study on influence of hydrophobic ionic liquid on tensile and impact properties of HDPE/KCF biocomposites. Asian Journal of Advanced Research and Reports, 15 (3). 60 - 66. ISSN 2582-3248

Sharip, Nur Sharmila and Ariffin, Hidayah and Tengku Yasim-Anuar, Tengku Arisyah and Andou, Yoshito and Shirosaki, Yuki and Jawaid, Mohammad and Md Tahir, Paridah and Ibrahim, Nor Azowa (2021) Melt- vs. non-melt blending of complexly processable ultra-high molecular weight polyethylene/ cellulose nanofiber bionanocomposite. Polymers, 13 (3). art. no. 404. pp. 1-15. ISSN 2073-4360

Shazleen, Siti Shazra and Ng, Lawrence Yee Foong and Ibrahim, Nor Azowa and Hassan, Mohd Ali and Ariffin, Hidayah (2021) Combined effects of cellulose nanofiber nucleation and maleated polylactic acid compatibilization on the crystallization kinetic and mechanical properties of polylactic acid nanocomposite. Polymers, 13 (19). art. no. 3226. pp. 1-25. ISSN 2073-4360

Shazleen, Siti Shazra and Tengku Yasim Anuar, Tengku Arisyah and Ibrahim, Nor Azowa and Hassan, Mohd Ali and Ariffin, Hidayah (2021) Functionality of cellulose nanofiber as bio-based nucleating agent and nano-reinforcement material to enhance crystallization and mechanical properties of polylactic acid nanocomposite. Polymers, 13 (3). art. no. 389. pp. 1-18. ISSN 2073-4360

Sheip, Younes H Solaiman and Abdul Hamid, Hazandy and Abiri, Rambod and Saleh Japri, Mohd Nazre and Mohamed, Johar and Jalil, Abd Majid and Naji, Hamid Reza (2021) Effect of Acacia mangium canopy on physicochemical characteristics and nutrient concentrations of the soil at Ayer Hitam Forest Reserve, Malaysia. Forests, 12 (9). art. no. 1259. pp. 1-26. ISSN 1999-4907

Shinde, Avinash and Siva, I. and Munde, Yashwant and Deore, Vishal and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Mustapha, Faizal (2021) Testing of silicon rubber/montmorillonite nanocomposite for mechanical and tribological performance. Nanomaterials, 11 (11). art. no. 3050. pp. 1-15. ISSN 2079-4991

Syed Abdullah, Syed Ahmad Saufi and Mohamed Yusoff, Mohd Zuhri and Mohammad Reza, Lalegani Dezaki and Salit, Mohd Sapuan and R. A., Ilyas and As'arry, Azizan and Mohd Ariffin, Mohd Khairol Anuar and M., Bodaghi (2021) Compression behaviour of bio-inspired honeycomb reinforced starfish shape structures using 3D printing technology. Polymers, 13 (24). pp. 1-17. ISSN 2073-4360

Syed Hasan, Sharifah Nur Munirah and Mohd Kusin, Faradiella and Nik Daud, Nik Norsyahariati and Saadon, Muhammad Anwar and Mohamat-Yusuff, Ferdaus and Ash’aari, Zulfa Hanan (2021) Characterization of gold mining waste for carbon sequestration and utilization as supplementary cementitious material. Processes, 9 (8). art. no. 1384. pp. 1-21. ISSN 2227-9717

Syed Hassan, Sharifah Nur Atikah and Yahya, Muhammad Syafiq and Ahmad Razi, Norhisham and Kamarudin, Norizah and Sanusi, Ruzana and Md Sharif, Badrul Azhar (2021) Effects of vegetation structure on avian biodiversity in a selectively logged hill dipterocarp forest. Global Ecology and Conservation, 28. pp. 1-12. ISSN 2351-9894

Tarique, Jamal and Salit, Mohd Sapuan and Abdan, Khalina (2021) Effect of glycerol plasticizer loading on the physical, mechanical, thermal, and barrier properties of arrowroot (Maranta arundinacea) starch biopolymers. Scientific Reports, 11. art. no. 13900. pp. 1-17. ISSN 2045-2322

Taufik, Siti Hajar and Ahmad, Siti Aqlima and Zakaria, Nur Nadhirah and Shaharuddin, Noor Azmi and Azmi, Alyza Azzura and Khalid, Farah Eryssa and Merican, Faradina and Convey, Peter and Zulkharnain, Azham and Abdul Khalil, Khalilah (2021) Rice straw as a natural sorbent in a filter system as an approach to bioremediate diesel pollution. Water, 13 (23). art. no. 3317. pp. 1-19. ISSN 2073-4441

Tay, Chai Hua and Mazlan, Norkhairunnisa and Hameed Sultan, Mohamed Thariq and Abdan, Khalina and Lee, Ching Hao (2021) Mechanical performance of hybrid glass/kenaf epoxy composite filled with organomodified nanoclay. Journal of Materials Research and Technology, 15. 4415 - 4426. ISSN 2238-7854

Ujat, Anysia Hedy and Vadamalai, Ganesan and Hattori, Yukako and Nakashima, Chiharu and Wong, Clement Kiing Fook and Zulperi, Dzarifah (2021) Current classification and diversity of Fusarium species complex, the causal pathogen of Fusarium wilt disease of banana in Malaysia. Agronomy-Basel, 11 (10). pp. 1-16. ISSN 2073-4395

Wahab, Mafa and Salit, Mohd Sapuan and Moklis, Muhammad Harussani and Mohamed Yusoff, Mohd Zuhri and A. A., Saleh (2021) Conceptual design of glass/renewable natural fibre-reinforced polymer hybrid composite motorcycle side cover. Journal of Renewable Materials, 9 (11). 1973 - 1989. ISSN 2164-6325; ESSN: 2164-6341

Wen, Ze Go and Chin, Kit Ling and H'ng, Paik San and Wong, Mui Yun and Chuah, Luqman Abdullah and Surendran, Arthy and Tan, Geok Hun and Lee, Chuan Li and Khoo, Pui San and Kong, Wai Jern (2021) Virulence of Rigidoporus microporus isolates causing white root rot disease on rubber trees (Hevea brasiliensis) in Malaysia. Plants, 10 (10). Jan-15. ISSN 2223-7747

Wong, Lih Jiun and H’ng, Paik San and Chuah, Luqman Abdullah and Mohamad Tahir, Paridah and Chin, Kit Ling (2021) Effect of chemical steeping on yields of glucose and xylose from dilute acid hydrolysis of extract from oil palm trunk. BioResources, 17 (1). 207 - 222. ISSN 1930-2126

Yusof, Noor Liyana and Abdul Mutalib, Noor Azira and Karim, Nazatul Umira and Abdul Halid, Nadrah and Aziman, Nurain and Fouad, Hassan and Jawaid, Mohammad and Ali, Asgar and Lau, Kia Kian and Sain, Mohini (2021) Efficacy of biopolymer/starch based antimicrobial packaging for chicken breast fillets. Foods, 10 (10). art. no. 2379. pp. 1-19. ISSN 2304-8158