Items where Division is "Faculty of Engineering" and Year is 2005

Abdullah, Abdul Ghani Liew and Idris, Azni and Ahmadun, Fakhru'l-Razi and Baharin, Badlishah Sham and Emby, F. and Megat Mohd Noor, Megat Johari and Nour, A. H. (2005) A kinetic study of a membrane anaerobic reactor (MAR) for treatment of sewage sludge. Desalination, 183 (1-3). pp. 439-445. ISSN 0011-9164; ESSN: 1873-4464

Abdullah, Norhafizah and Chase, Howard Allaker (2005) Removal of poly-histidine fusion tags from recombinant proteins purified by expanded bed adsorption. Biotechnology and Bioengineering, 92 (4). pp. 501-513. ISSN 0006-3592; ESSN: 1097-0290

Al-Mansoori, Mohammed Hayder and Abd. Rahman, Mohd Kamil and Mahamd Adikan, Faisal Rafiq and Mahdi, Mohd Adzir (2005) Widely tunable linear cavity multiwavelength Brillouin-Erbium fiber laser. Optics Express, 13 (9). pp. 3471-3476. ISSN 1094-4087

Arsyad, Jumasiah and Chuah, Teong Guan and Gimbon, Jolius and Choong, Thomas Shean Yaw and Idris, Azni (2005) Adsorption of basic dye onto palm kernel shell activated carbon: sorption equilibrium and kinetics studies. Desalination, 186 (1-3). pp. 57-64. ISSN 0011-9164

Buhari, Seyed Mohamed and Habaebi, Mohamed Hadi and Mohd Ali, Borhanuddin (2005) A new congestion control algorithm for active networks. Pertanika Journal of Science & Technology, 13 (2). pp. 187-211. ISSN 0128-7680

Chuah, Teong Guan and Arsyad, Jumasiah and Idris, Azni and Katayon, Saed and Choong, Thomas Shean Yaw (2005) Rice husk as a potentially low-cost biosorbent for heavy metal and dye removal: an overview. Desalination, 175 (3). pp. 305-316. ISSN 0011-9164; ESSN: 1873-4464

D., Rozanna and Ahmad, Salmiah and Chuah, T. G. and R., Medyan and Choong, Thomas S. Y. and M., Sa'ari (2005) A study on thermal characteristics of phase change material (PCM) in gypsum board for building application. Journal of Oil Palm Research, 17 (1). pp. 41-46. ISSN 2811-4701

Gembari, M. S. and Habaebi, Habaebi and Noordin, Nor Kamariah and Mohd Ali, Borhanuddin and Prakash, Veeraraghavan (2005) Location Management Cost Reduction Using Adaptive Velocity-movement Based Scheme. Pertanika Journal of Science & Technology, 13 (2). pp. 173-185. ISSN 0128-7680

Gimbun, Jolius and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Ahmadun, Fakhru'l-Razi (2005) Prediction of the effects of cone tip diameter on the cyclone performance. Journal of Aerosol Science, 36 (8). pp. 1056-1065. ISSN 0021-8502; ESSN: 1879-1964

Gimbun, Jolius and Chuah, Teong Guan and Ahmadun, Fakhru'l-Razi and Choong, Thomas Shean Yaw (2005) The influence of temperature and inlet velocity on cyclone pressure drop: a CFD study. Chemical Engineering and Processing: Process Intensification, 44 (1). pp. 7-12. ISSN 0255-2701; ESSN: 1873-3204

Hamarsheh, Mohammad M. Naji and Shalaby, Hossam H. M. and Abdullah, Mohamad Khazani (2005) Design and analysis of a dynamic code division multiple access communication system based on tunable optical filter. Journal of Lightwave Technology, 23 (12). pp. 3959-3965. ISSN 0733-8724

Haron, Nuzul Azam and Hassim, Salihudin and Abdul Kadir, Mohd Razali and Jaafar, Mohd Saleh (2005) Building cost comparison between conventional and formwork system. Jurnal Teknologi, 43 (B). pp. 1-11. ISSN 0127–9696; ESSN: 2180–3722

Haron, Nuzul Azam and Hassim, Salihudin and Abdul Kadir, Mohd Razali and Jaafar, Mohd Saleh (2005) Building cost comparison between conventional and formwork system: a case study of four-storey school buildings in Malaysia. American Journal of Applied Sciences, 2 (4). pp. 819-823. ISSN 1546-9239; ESSN: 1554-3641

Icier, Filiz and Ilicali, Coskan (2005) Temperature dependent electrical conductivities of fruit purees during ohmic heating. Food Research International, 38 (10). pp. 1135-1142. ISSN 0963-9969

Khairi, K. A. and Mahamd Adikan, Faisal Rafiq and Naji, Ahmed Wathik and Al-Mansoori, Mohammed Hayder and Mahdi, Mohd Adzir (2005) Experimental Investigation of pump propagating direction in double-pass Er3+-doped fiber amplifiers. IEICE Electronics Express, 2 (18). pp. 477-481. ISSN 1349-2543

Kim Huat, Bujang and Ali, Faisal and Low, Tian Huat and Mariappan, Saravanan (2005) Infiltration characteristics of unsaturated residual soils of various weathering grades. Jurnal Teknologi, 42 (B). pp. 45-55. ISSN 0127-9696

Law, Teik Hua and Radin Sohadi, Radin Umar (2005) Determination of Comfortable Safe Width in an Exclusive Motorcycle Lane. Journal of the Eastern Asia Society for Transportation Studies, 6 (1). pp. 3372-3385. ISSN 1881-1124

Law, Teik Hua and Radin Sohadi, Radin Umar and Wong, Shaw Voon (2005) The Malaysian Government’s Road Accident Death Reduction Target for Year 2010. IATSS Research, 29 (1). pp. 42-49. ISSN 0386-1112

Law, Teik Hua and Radin Sohadi, Radin Umar and Zulkaurnain, S. and Subramaniam, Kulanthayan (2005) Impact of the effect of economic crisis and the targeted motorcycle safety programme on motorcycle-related accidents, injuries and fatalities in Malaysia. International Journal of Injury Control and Safety Promotion, 12 (1). pp. 9-21. ISSN 1745-7300; ESSN: 1745-7319

Lee, Teang Shui and Haque, Md. Aminul and Mohamed Najim, Mohamed Mujithaba (2005) In-time Rice Irrigation Water Management Under Limited Water Supply. Pertanika Journal of Science & Technology, 13 (1). pp. 97-111. ISSN 0128-7680

Lee, Teang Shui and Mohamed Najim, Mohamed Mujithaba and Haque, Md. Aminul and Feng, Huang Yuk (2005) Modelling of Changes in Evapotranspiration for an Area in Peninsular Malaysia. Pertanika Journal of Science & Technology, 13 (2). pp. 237-248. ISSN 0128-7680

Lee, Teang Shui and Mohamed Najim, Mohamed Mujithaba and Haque, Md. Aminul and Huang, Yuk Feng (2005) Estimation of Evapotranspiration ill a Rice Irrigation Scheme in Peninsular Malaysia. Pertanika Journal of Science & Technology, 13 (2). pp. 271-285. ISSN 0128-7680

Lim, Yu Liang and Law , Teik Hua and Ma'soem, Dadang Mohamad (2005) Traffic accident application using Geographic Information System. Journal of the Eastern Asia Society for Transportation Studies, 6. pp. 3574-3589.

Ling, Tau Chuan and Lyddiatt, Andrew (2005) Integration of mechanical cell disruption and fluidised bed recovery of G3PDH from unclarified disrupted yeast: a comparative study of the performance of unshielded and polymer shielded dye-ligand chromatography systems. Journal of Biotechnology, 119 (4). pp. 436-448. ISSN 0168-1656

Ling, Tau Chuan and Lyddiatt, Andrew (2005) The comparative recovery performance of anion exchange and dye-ligand fluidised bed adsorption of G3PDH from unclarified yeast extract. Asia Pacific Journal of Molecular Biology and Biotechnology, 13 (1). pp. 59-62. ISSN 0128-7451

Mohammed, Thamer Ahmed and Megat Mohd Noor, Megat Johari and Ghazali, Abdul Halim and Kim Huat, Bujang (2005) Validation of some bridge pier scour formulae using field and laboratory data. American Journal of Environmental Sciences, 1 (2). pp. 119-125. ISSN 1553-345X; ESSN: 1558-3910

Noorzaei, Jamaloddin and Karami, Morteza and Thanoon, Waleed Abdulmalik and Jaafar, Mohd Saleh (2005) Static and dynamic analysis of rockfill dam using finite-infinite element method. Pertanika Journal of Science & Technology, 13 (1). pp. 31-42. ISSN 0128-7680

Omar, Rozita and Abdullah, M. A. and Hasan, M. A. and Mahmood, Maziah and Mustapa Kamal, Siti Mazlina (2005) Optimization and elucidation of interactions between ammonium, nitrate and phosphate in Centella asiatica cell culture using response surface methodology. Biotechnology and Bioprocess Engineering, 10 (3). pp. 192-197. ISSN 1226-8372

Ooi, Soo Shen and Wong, Shaw Voon and Radin Sohadi, Radin Umar and Abdul Aziz, Azhar and Megat Ahmad, Megat Mohamad Hamdan (2005) Cervical spine injuries sustained by motorcyclists in road crashes in Malaysia. International Journal of Crashworthiness, 10 (3). pp. 295-303. ISSN 1358-8265; ESSN: 1754-2111

Radin Sohadi, Radin Umar (2005) Updates of Road Safety Status in Malaysia. IATSS Research, 29 (1). pp. 78-80. ISSN 0386-1112

Radin Sohadi, Radin Umar (2005) The Value of Daytime Running Headlight Initiatives on Motorcycle Crashes in Malaysia. Transport and Communications Bulletin for Asia and the Pacific (74). pp. 17-31. ISSN 0252-4392

Rahman, Ataur and Yahya, Azmi and Bardaie, Mohd. Zohadie and Ahmad, Desa and Wan Ismail, Wan Ishak (2005) Design and development of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia. International Journal of Heavy Vehicle Systems, 12 (3). pp. 239-267. ISSN 1744-232X

Saad, Saiful Azhar and Abdullah, Abdul Ghani Liew and Daud, Suhardy and Kasim, Farizul Hafiz and Mohamed Dzahir, Mohd Irfan Hatim (2005) Dye removal from aqueous solution by using adsorption on treated sugarcane bagasse. American Journal of Applied Sciences, 2 (11). pp. 1499-1503. ISSN 1546-9239; ESSN: 1554-3641

Saed, Katayon and Megat Mohd Noor, Megat Johari and Abdullah, Abdul Ghani Liew and Jusoh, Ahmad (2005) Influence of cationic polyelectrolyte coagulant on microfiltration performance for treatment of oxidation pond effluent. Desalination, 184 (1-3). pp. 423-430. ISSN 0011-9164; ESSN: 1873-4464

Salih, Qussay Abbas and Ramli, Abdul Rahman and Mahmud, Rozi and O. K. Rahmat, Rahmita Wirza (2005) Brain white and gray matter anatomy of MRI segmentation based on tissue evaluation. Medscape General Medicine, 7 (2). ISSN 1531-0132

Teh, Kian Teck and Hassim, Salihudin and Muniandy, Ratnasamy and Omar, Husaini and Hassan, Azmi (2005) The development of Road Construction Material Selection System (RC-MSS). Journal of the Eastern Asia Society for Transportation Studies, 6. pp. 1313-1328. ISSN 1881-1124

Tey, Beng Ti and Al-Rubeai, Mohamed (2005) Effect of Bcl-2 overexpression on cell cycle and antibody productivity in chemostat cultures of myeloma NS0 cells. Journal of Bioscience and Bioengineering, 100 (3). pp. 303-310. ISSN 1389-1723

Thanoon, Waleed Abdulmalik and Jaafar, Mohd Saleh and Abdul Kadir, Mohd Razali and Noorzaei, Jamaloddin (2005) Repair and structural performance of initially cracked reinforced concrete Slabs. Construction and Building Materials, 19 (8). pp. 595-603. ISSN 0950-0618

Wong, Su Luan and Ng, Siew Fung and Nawawi, Mokhtar and Tang, Sai Hong (2005) Experienced and inexperienced Internet users among pre-service teachers: their use and attitudes toward the Internet. Educational Technology & Society, 8 (1). pp. 90-103. ISSN 1176-3647; ESSN: 1436-4522

Yassin, Atif A. A. and Ahmadun, Fakhru'l-Razi and Ma, Ah Ngan and Morimoto, Masayoshi and Iyuke, Sunny Esayegbemu and Veziroglu, Nejat T. (2005) Fed batch production of hydrogen from palm oil mill effluent using anaerobic microflora. International Journal of Hydrogen Energy, 30 (13-14). pp. 1393-1397. ISSN 0360-3199; ESSN: 1879-3487

Ahmadun, Fakhru'l-Razi and Chuan, Teong Guan and Ismail, Mohd Halim Shah (2005) Safety : principles & practices in the laboratory. Universiti Putra Malaysia Press, Serdang, Selangor. ISBN 9789832871828

Abd Manaf, Ismanizam and Ismail, Napsiah and Hamouda, Abdel Magid Salem and Wong, Shaw Voon (2005) Complex parts surface modelling from laser scanning data. In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6-8 Dec. 2005, Putrajaya, Malaysia. .

AbdelQader, Hasan and Babiker, Elsadig and Ramli, Abdul Rahman and Al-haddad, Syed (2005) An effective feature extraction method for fingerprint image. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Abdewi , Elfetori F. and Sulaiman, Shamsuddin and Hamouda , Abdel Majid Salem and Ebrahimi, Mahdi (2005) An experimental investigation of the effect of specimen shape and geometry on the energy absorption of fiberglass composite tubes. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. (pp. 238-245).

Abdullah, Ahmad Baharuddin and Hamouda, Abdel Magid Salem (2005) Development of an integrated CAD/CAE/CAM system for forging process: a proposal. In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Ahmad, Asmahanim and Md Ali, Mas Izyani and Zamzuri, Abdul Kadir and Mahdi, Mohd Adzir (2005) Gain-control Raman fiber amplifier incorporating ring cavity. In: 2005 13th IEEE International Conference on Networks Jointly held with the 2005 7th IEEE Malaysia International Conference on Communications , 16-18 Nov. 2005 , Kuala Lumpur, Malaysia. (pp. 77-80).

Ahmad, Siti Anom and Chappell, Paul H. and Ali, Mohd Liakot (2005) Automatic prehension using an accelerometer and force sensor. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Ahmat Raslan, Sharuzzaman and Chan, Jiunn Wen and Razalli, Mohammad Shahrazel and Mahdi, Mohd Adzir (2005) Self-checkout e-bistro based on RFID simultaneous price detection. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Al Shahri, Ahmed Ali and Mohd. Yusuff, Rosnah (2005) Exploring inventory management practices in the Omani SME’S. In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Al-Shahri, Ahmed Ali and Mohd Yusuff, Rosnah (2005) Exploring supply chain management practices in the Omani SMEs. In: 35th International Conference on Computers and Industrial Engineering, 19-22 June 2005, Istanbul, Turkey. (pp. 105-109).

Ali Adlan, Hanan Hassan and Ramli, Abd Rahman and Mohd Babiker, Elsadig Ahmed (2005) Improving generalization in backpropagation networks architectures. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Anuar, A. and Mohd. Yusuff, Rosnah and Megat Ahmad, Megat Mohamad Hamdan and Abdul Aziz, M. (2005) Development of manufacturing key performance indicators for Malaysian Small and Medium Industries (SMIS). In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6 - 8 Dec. 2005, Putrajaya, Malaysia. .

Aqel, Mohammad O. A. and Ismail, Napsiah (2005) Development of programmable logic controllers training kit. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Awal, Md. Awal and Wan Ishak, Wan Ismail and Endan, Johari and Harun, Mohd. Haniff (2005) Imaging approach for LAI determination of oil palm. In: International Conference on Advanced Material 2005: Conference on Bio-Engineering (CoBE 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. . (Unpublished)

Azizi, Amir and Ismail, Napsiah (2005) Investigating on the supply chain management. In: International Advanced Technology Congress: Conference on Spatial and Computational Engineering, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Bashi, Sinan Mahmod and Mariun, Norman and Misron, Norhisam and Ishak, Mohamad Ridzwan (2005) Voltage sag mitigation using flywheel inverter system. In: International Advanced Technology Congress: Conference on Advances in Theoretical Sciences, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Bayat, Mehdi and Hamouda, Abdel Magid Salem and Mahdi , E. (2005) On the thermoelastic functionally graded material of ceramic-metal plate. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6 - 8 Dec. 2005, Putrajaya, Malaysia. (pp. 584-592).

Cheah, Cheng Lai and Abdullah, Mohamad Khazani and Ahmad Anas, Siti Barirah and Mahdi, Mohd Adzir and Mohd Ali, Borhanuddin (2005) An adaptive error correction scheme for SDH based wavelength division multiplexed optical networks. In: 2005 13th IEEE International Conference on Networks Networks jointly held with the 2005 IEEE 7th Malaysia International Conference on Communication, 16-18 Nov. 2005, Kuala Lumpur, Malaysia. (pp. 661-666).

Dolah, Mohd Shahrizal and Mohd Yusuff, Rosnah and Abdul Rahman, Ahmad Rizal and Osman, Mohd Rasid (2005) Jointing design in open plan office system. In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Hamarsheh, Mohammad M. Naji and Abdullah, Mohamad Khazani and Mahdi, Mohd Adzir and Khatun, Sabira and Shalaby, Hossam M. H. (2005) Dynamic optical code division multiple access communication system analysis and performance enhancement by signal clipping. In: 1st International Conference on Computers, Communication & Signal Processing with Special Track on Biomedical Engineering (CCSP 2005), 14-16 Nov. 2005 , Kuala Lumpur, Malaysia. (pp. 125-129).

Hussin, Saleh and Babakr, Elsadig and Ramli, Abd Rahman and Al-Hadad, Sayed R. (2005) A wavelet based watermarking algorithm for video. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Huweg, A. F. and Bashi, Senan M. and Mariun, Norman (2005) Application of inverter based shunt device for voltage sag mitigation due to starting of an induction motor load. In: 18th International Conference and Exhibition on Electricity Distribution (CIRED 2005), 6-9 June 2005, Turin, Italy. .

Ismail, Ahmad Rasdan and Makhtar, Nor Kamilah and Hassan, Azmi and Ismail, Napsiah (2005) Simulation and sequential operation analysis of a robotic cell. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Ismail, Napsiah and Abdul Rahman, Khairuddin and Md Yusof, Juraina and Mohd Kassim, Muhammad Saufi and Tang, Sai Hong and Samin, Razali (2005) Vision-based 3D part recognition system for flexible manufacturing cell. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Kanisin, Devaraj and Shokouhi, Mohammad and Wong, Wai Pun and Singh, Manveer and Siau, Wing Ket and Tang, Sai Hong and Ismail, Napsiah (2005) Development of active & passive airborne remote sensors. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Karimadini, Mohammad and Marhaban, Mohammad Hamiruce and Mohd Noor, Samsul Bahari and Aris, Ishak and Davari, Atefeh (2005) Minimum rule-based parallel structure fuzzy controller. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. (pp. 1-9).

Khmag, Asem and Babiker, Elsadig and Ramli, Abd Rahman (2005) New approach of cryptography algorithm for e- mail applications. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Lim, Y. P. and Sulaiman, Shamsuddin and Hamouda, Abdel Magid Salem and Megat Ahmad, Megat Mohamad Hamdan (2005) The combined effect of Al-5Ti-1B and Al-10Sr on the metallurgical properties of LM6 Al-Si sand castings. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6 - 8 Dec. 2005, Putrajaya, Malaysia. (pp. 394-407).

Lim, Y. P. and Sulaiman, Shamsuddin and Hamouda, Abdel Magid Salem and Megat Ahmad, Megat Mohamad Hamdan (2005) An experimental investigation on LM6 AL-SI alloy sand casting to study the correlation between metallurgical properties and solidification rate. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6 - 8 Dec. 2005, Putrajaya, Malaysia. (pp. 169-180).

Mansur, Rusnam and Mohd Soom, Mohd Amin and Idris, Azni and Lee, Teang Shui (2005) First flush phenomenon study of storm runoff from a maize cultivated area. In: International Conference on Advanced Materials 2005: Conference on Bio-Engineering (CoBE 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. . (Unpublished)

Misron, Norhisam and Awaludin, Noor Azita and Iqbal, Syed Javaid and Mariun, Norman and Hirama, Y. (2005) Thrust density characteristics of linear DC motor. In: 2005 International Conference on Power Electronics and Drives Systems (PEDS 2005), 28 Nov.-1 Dec. 2005, Kuala Lumpur, Malaysia. (pp. 1408-1412).

Misron, Norhisam and Wong, K. C. and Mariun, Norman and Wakiwaka, Hiroyuki (2005) Double side interior permanent magnet linear synchronous motor and drive system. In: 2005 International Conference on Power Electronics and Drives Systems (PEDS 2005), 28 Nov.-1 Dec. 2005, Kuala Lumpur, Malaysia. (pp. 1370-1373).

Mohamed Addin, Addin Osman and Salit, Mohd Sapuan and Ebrahimi, Mahdi and Othman, Mohamed and Ismail, Napsiah (2005) Bayesian network approach to classify damages and f -folds feature subset selection method in laminated composite materials. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Mohammad, Musli and Osman, Mohd Rasid and Mohd Yusuff, Rosnah and Ismail, Napsiah (2005) Strategies and critical success factors for integrated management systems implementation. In: 35th International Conference on Computers and Industrial Engineering, 19-22 June 2005, Istanbul, Turkey. (pp. 1391-1396).

Mohammed Hilmi, Hassan Saad and Mohd Soom, Mohd Amin and Mohamed Shariff, Abdul Rashid (2005) The use of remote sensing for estimating evapotranspiration in the rice fields in Malaysia. In: International Conference on Advanced Materials 2005: Conference on Bio-Engineering (CoBE 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. .

Mohd Noor, Samsul Bahari and Marhaban, Mohammad Hamiruce and Mansor, Hasmah (2005) Fuzzy control of continuous stirred tank reactor (CSTR). In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Mohd Yusuff, Rosnah and Syed Abdul Rashid, Sharifah Norazizan (2005) The ageing population and implication to product design. In: 35th International Conference on Computers and Industrial Engineering, 19-22 June 2005, Istanbul, Turkey. (pp. 2215-2220).

Musharavati, F. and Ismail, Napsiah and Hamouda, Abdel Magid Salem and Ramli, Abdul Rahman (2005) An analytical hierarchical process approach for evaluating configuration performance in reconfigurable manufacturing systems. In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6 - 8 Dec. 2005, Putrajaya, Malaysia. .

Musharavati, Farayi and Ismail, Napsiah and Hamouda, Abdel Magid Salem and Ramli, Abd. Rahman (2005) A neural network based control strategy for reconfigurable manufacturing systems. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Mustafa, Yousif Mohamed and Mohd Soom, Mohd Amin and Lee, Teang Shui and Mohamed Shariff, Abdul Rashid (2005) Land development impacts on surface runoff using remote sensing and an artificial neural network model. In: International Conference on Advanced Materials 2005: Conference on Bio-Engineering (CoBE 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. . (Unpublished)

Ng, Chee Kyun and Ismail, Mahamod and Mohd Ali, Borhanuddin and Khatun, Sabira and Jamuar, Sudhanshu Shekhar (2005) Impact of inter-cell interference on capacity in the joint multiple access (CDMA and SDMA) system. In: 2005 Asia-Pacific Conference on Communications, 3-5 Oct. 2005, Perth, Western Australia, Australia. (pp. 435-439).

Ng, Chee Kyun and Khatun, Sabira and Mohd Ali, Borhanuddin and Jamuar, Sudhanshu Shekhar and Ismail, Mahamod (2005) Space division duplex (SDD) system using smart antenna. In: 2005 IEEE International Workshop on Antenna Technology: Small Antennas and Novel Metamaterials (IWAT 2005), 7-9 Mar. 2005, Singapore. (pp. 483-488).

Noordin, Nor Kamariah and Mohd Ali, Borhanuddin and Jamuar, Sudhanshu Shekhar and Ismail, Mahamod (2005) Coded space-time-frequency OFDM over IEEE 802.11 fading channels. In: 2005 Asia-Pacific Conference on Communications, 3-5 Oct. 2005, Perth, Western Australia, Australia. (pp. 1078-1082).

Noordin, Nor Kamariah and Mohd Ali, Borhanuddin and Jamuar, Sudhanshu Shekhar and Ismail, Mahamod (2005) A full rate concatenated space-frequency and space-time OFDM over Naftali fading channels. In: 2005 IEEE Region 10 Conference (TENCON 2005), 21-24 Nov. 2005, Crown Promenade Hotel Melbourne, Australia. .

Noordin, Nor Kamariah and Mohd Ali, Borhanuddin and Jamuar, Sudhanshu Shekhar and Ismail, Mahamod (2005) A simplified sphere decoding algorithm for MIMO transmission system. In: 2005 IEEE Region 10 Conference (TENCON 2005), 21-24 Nov. 2005, Crown Promenade Hotel Melbourne, Australia. .

Perumal, Thinagaran and Ramli, Abd Rahman and Chui, Yew Leong and Shafie @ Musa, Siti Mariam and Mansor, Yaakob (2005) Embedded multimedia gateway for smart home environment. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Razali, Mohd. Hudzari and Wan Ismail, Wan Ishak and Ismail, Napsiah and Sulaiman, Md. Nasir and Shariff, Rashid (2005) Videogrammetry technique for arm positioning of bio-production robot. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Razalli, Mohammad Shahrazel and Ahmat Raslan, Sharuzzaman and Shafie, Siti Mariam and Mahdi, Mohd Adzir (2005) Design and development of wireless RFID reader communication system at UHF band. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Rostami, Yousef and Wong, Shaw Voon and Ibrahim, Ali Azizi (2005) New application of fuzzy logic in social science studies. In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6 - 8 Dec. 2005, Putrajaya, Malaysia. .

Saaid, S. S. and Ismail, Napsiah and Wong, Shaw Voon and Sulaiman, Shamsuddin and Osman, Mohd. Rasid (2005) Pattern matching technique from B-rep model. In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Saeed, Mohammed Abdo and Mohd Ali, Borhanuddin and Khatun, Sabira and Ismail, Mahamod and Rostami, A. (2005) Spatial and temporal fading correlation of uniform linear antenna array in three-dimensional signal scattering. In: 2005 Asia-Pacific Conference on Communications, 3-5 Oct. 2005, Perth, Western Australia, Australia. (pp. 425-429).

Shariah, Sawsan Kamel and Marhaban, Mohammad Hamiruce and Ramli, Abdul Rahman and Mohd Noor, Samsul Bahari (2005) A review on detection and removal of raindrop using cameras. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Syed Junid, Syed Alwee Aljunid and Samad, M. D. A. and Othman, M. and Hisham, M. H. and Kasiman, A. H. and Abdullah, Mohamad Khazani (2005) Development of modified double-weight code and its implementation in multi-rate transmissions. In: 2005 13th IEEE International Conference on Networks Jointly held with the 2005 7th IEEE Malaysia International Conference on Communications, 16-18 Nov. 2005, Kuala Lumpur, Malaysia. (pp. 288-292).

Tarlochan, Faris and Hamouda, Abdel Magid Salem and Sahari, Barkawi and Saad, Elsadig Mahdi Ahmed (2005) Edgewise compression of composite sandwich panels: effect of core hybridization. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. (pp. 9-16).

Vasili, Mohammad Reza and Tang, Sai Hong (2005) Development of an intelligent material handling equipment selection system: a review of recent research. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Wan Hassan, Wan Chik Zaharah and Mohd Tamrin, Shamsul Bahri and Abdul Hamid, Hamiraj Fahry and Raja Ahmad, Raja Adzrin and Mohd Yusuff, Rosnah and Hamzah, Rosnan and Abdul Aziz, Nasaruddin and Jalaludin, Juliana and Nordin , Rusli and Naing, Lin and Awang, Mazlan (2005) Development of biomechanical lumbar support for ergonomics bus seat. In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Wan Ishak, Wan Ismail and Bochari-Gevao, S. M. and Yahya, Azmi and Teh, Christopher Boon Sung and Chan, Chee Wan (2005) Energy consumption and cost of seedbed preparation for lowland rice cultivation in Malaysia. In: International Conference on Advanced Materials 2005: Conference on Bio-Engineering (CoBE 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. . (Unpublished)

Wan Ismail, Wan Ishak and Awal, Md Abdul and Endan, Johari and Harun, Mohd. Haniff (2005) Simulation programme for oil palm LAI and yield prediction. In: International Conference on Advanced Materials 2005: Conference on Bio-Engineering (CoBE 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. .

Zamani, Seyed Ali and Mahmud, Ahmad Rodzi and Jahanshiri, Ebrahim and Hussien, Rabie Ali and Karimadini, Mohammad (2005) Intelligent prediction of traffic volume distribution. In: International Advanced Technology Congress: Conference on Spatial and Computational Engineering, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Zan, Zuraidah and Syed Junid, Syed Alwee Aljunid and Yaacob, Mohd Hanif and Abdullah, Mohamad Khazani and Shaari, Sahbudin (2005) Design configuration of encoder and decoder modules for modified double weight (MDW) code spectral amplitude coding (SAC) optical code division multiple access (OCDMA) based on fiber Bragg gratings. In: 2nd International Conference on Advanced Optoelectronics and Lasers (CAOL 2005), 12-17 Sept. 2005, Yalta, Crimea, Ukraine. (pp. 249-252).

Abd. Shukor, Mohd Yunus (2005) Xenoassay - metal™ - a heavy metal bioassay system. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Abdul Kadir, Mohd Razali (2005) Interlocking mortarless load bearing building block system. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Abdullah, Mohamad Khazani (2005) Fiber break monitoring system (FBMS). Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Abdullah, Mohamad Khazani (2005) Fiber optic duplexer module (FDM). Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Aris, Ishak (2005) GSM - based communication protocol for vehicle immobilizer system. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Aris, Ishak (2005) Painting robot for houses and buildings. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Aris, Ishak (2005) Portable fiber optic based lightening detection system. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Chuah, Teong Guan (2005) Palm oil based fatty acid impregnated in Gypsum wall board. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Idris, Azni (2005) Biofil - biofilter technology for waste treatment. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Idris, Azni (2005) Fuel oil - edible oil waste blend. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Mariun, Norman (2005) For dynamic dimming powerline communication on remote monitoring street lighting intelligent distribution management (RMS-IDMTM). Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Mohd Ali, Borhanuddin (2005) InnoDesk - research and development of a world-class 'off-the-shelf' system management software. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Muniandy, Ratnasamy (2005) Intelligent asphalt mix tester (Turamesin). Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Omar, Husaini (2005) H-Ometer™ strength measuring device for weak rock and hard soil. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Wong, Shaw Voon (2005) MechT™ impactor - pendulum impact test unit. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Yaacob, Mohd Hanif (2005) Optical layer automatic protection switch (APS) module. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Yahya, Azmi (2005) Filtrap system - for mapping tractor - implement field performance. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Yahya, Azmi (2005) Tree crop seedling transplanter ver-1. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Yunus, Robiah (2005) Rysoil™ - high performance synthetic lubricants from palm oil. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Mohd. Razali Abdul Kadir (2005) Interlocking mortarless load bearing building block systems / Putra Block. UNSPECIFIED.

Barkawi Sahari (2005) Backbone structure of front vehicle. UNSPECIFIED.

Barkawi Sahari (2005) Body structure for natural gas vehicles. UNSPECIFIED.

Barkawi Sahari (2005) Method and system for calibration of mass flow measurement for volumetric flow measurement device. UNSPECIFIED.

Barkawi Sahari (2005) Method for controlling multiple-injection of gaseous fuel in a direct injection engine. UNSPECIFIED.

Barkawi Sahari (2005) Tank mounting structure. UNSPECIFIED.

Barkawi Sahari (2005) Test method and optimisation of ignition system parameters inside CNG-DI engine. UNSPECIFIED.

Mohd Sapuan Salit (2005) Apparatus for machining spiral tooth of a spiral bevel gear. UNSPECIFIED.

Noordin, Basir (2005) Prediction of long term deformation for balanced cantilever prestressed concrete segmental box girder. [Project Paper Report]

A. Shehab, Fares (2005) Structural Behaviour of Interlocking Hollow Block Panel With Stiffener Subjected to Axial And Eccentric Load. Masters thesis, Universiti Putra Malaysia.

Abbas, Kassim Ali (2005) Thermal Diffusivity and Quality Deterioration Index of Malaysian Pangasius Sutchi During Cold Storage. PhD thesis, Universiti Putra Malaysia.

Abd Aziz, Azizuddin (2005) Comparison of Cooling Cost Effectiveness Between Unitary and Central Cooling System. Masters thesis, Universiti Putra Malaysia.

Abd Halim, Wahidah (2005) Performance Studies of Static Synchronous Compensator and Static Synchronous Series Compensator Modes for Convertible Static Compensator. Masters thesis, Universiti Putra Malaysia.

Abdul Rahman, Ahmad Rosli (2005) Evaluation of effective section for standard prestress concrete sections under flexure. Masters thesis, Universiti Putra Malaysia.

Abdulrazeg, Aeid Ali (2005) Nonlinear analysis of integral bridge. Masters thesis, Universiti Putra Malaysia.

Abood, Manal M. (2005) Effects of napier and cattail grasses on open channel flow characteristics. Masters thesis, Universiti Putra Malaysia.

Ahmad, Razali (2005) Nonlinear finite element modeling of buried conduit structure. Masters thesis, Universiti Putra Malaysia.

Ahmad Hambali, Nor Azura Malini (2005) Development of Satellite Propagation Effects Tool For Ku-Band, Ka-Band And Q/V-Band Links. Masters thesis, Universiti Putra Malaysia.

Ahmed Yassin, Atif Abdelmoneim (2005) Biohydrogen Production From Palm Oil Mill Effluent by Anaerobic Fermentation. PhD thesis, Universiti Putra Malaysia.

Al-Goraf'i, Mohammed Abdulla Ismail (2005) Inelastic Analysis of Soil-Structure Interaction System. Masters thesis, Universiti Putra Malaysia.

Al-Kazwini, Hussein A. Taqi (2005) An Integrated Firewall System Model In A Multiclient-Server Environment. Masters thesis, Universiti Putra Malaysia.

Al-Mamun, Abdullah (2005) Nonpoint Source Pollution From a Tropical Urban Residential Area. PhD thesis, Universiti Putra Malaysia.

Al-Obaidi, Fayda F. (2005) Studying Structural Behavior of Concrete Faced Rockfill Dam Using Finite Element Method. Masters thesis, Universiti Putra Malaysia.

Alfourjani, Wedad Ashour (2005) In Vitro Anticancer Properties of Linamarin Controlled Release From Biodegradable Poly-Lactic Co-Glycolic Acid Nanoparticle. Masters thesis, Universiti Putra Malaysia.

Ali @ Hasim, Norshamsuri (2005) Integration of Services Onto Synchronous Digital Hierarchy Line Utilizing Wavelength Division Multiplexing. Masters thesis, Universiti Putra Malaysia.

Almashrgy, Mohamed Ali (2005) Speaker Identification Using Wavelet Packet Transform and Feed Forward Neural Network. Masters thesis, Universiti Putra Malaysia.

Arsyad, Jumasiah (2005) Adsorption of Basic and Acid Dyes Using Palm Kernel Shell - Based Activated Carbon. Masters thesis, Universiti Putra Malaysia.

Awal, Md. Abdul (2005) Image-Based Measurement of Leaf Area Index and Radiation Interception for Modelling of Oil Palm. Doctoral thesis, Universiti Putra Malaysia.

Bockari-Gevao, Sakr Marvin (2005) Systems Approach to Efficient Field Machinery Utilization for Lowland Rice Production. PhD thesis, Universiti Putra Malaysia.

Bouketir, Omrane (2005) Development of a Knowledge-Based System for Power Electronics Design. PhD thesis, Universiti Putra Malaysia.

Chong, Chiew Choy (2005) Mathematical Modelling of an Unmanned Aerial Vehicle. Masters thesis, Universiti Putra Malaysia.

Chow, Yen Mei (2005) A Simplified and Selective Technique for The Direct Recovery of Glucose-6-Phosphate Dehydrogenase From Unclarified Yeast Feedstock. Masters thesis, Universiti Putra Malaysia.

Eslamian, Saeed (2005) Microscopic Study of 5083-H321 Aluminium Alloy Under Fretting Fatigue Condition. Masters thesis, Universiti Putra Malaysia.

Ghazali, Hapida (2005) Automation of Constant Head Orifice Off-Take Structure. Masters thesis, Universiti Putra Malaysia.

Goay, Lay Nee (2005) Development of an Automated Selection System for Cutting Tools and Machining Parameters of Milling Operations. Masters thesis, Universiti Putra Malaysia.

Hashim, Hashbullishman (2005) Harmonic Analysis and Mitigation of Electronic Devices Using Passive Filter. Masters thesis, Universiti Putra Malaysia.

Hossain, Md. Altab (2005) Longitudinal Aerodynamic Characteristics of an Aircraft Model with and Without Winglet. Masters thesis, Universiti Putra Malaysia.

Huang, Yuk Feng (2005) Development Of A Reservoir Inflow Forecasting Model For An Ungauged Catchment. PhD thesis, Universiti Putra Malaysia.

Hussein, Hidayatullah (2005) Mereka Bentuk dan Membina Sebuah Mesin Belah Buah dan Pisah Biji Koko Secara Membujur. Masters thesis, Universiti Putra Malaysia.

Hussien, Muataz Ali Atieh (2005) Synthesis, Characterization and Application of Carbon Nanotubes and Carbon Nanofibers. PhD thesis, Universiti Putra Malaysia.

Huweg, Abdurrahman Feturi S. (2005) Development of STATCOM to Improve Voltage Sag Due to Starting of 5 kilowatt Induction Motor. Masters thesis, Universiti Putra Malaysia.

Ibrahim, Zahari (2005) Vegetation Association and Site Preferences of Tongkat Ali (Eurycoma Longifolia Jack) in a Health Lowland Forest, Pahang, Malaysia. Masters thesis, Universiti Putra Malaysia.

Idris, Mohd Rizal (2005) Mengenal Pasti Tapak Stesyen Pemindahan Sisa Pepejal Dengan Menggunakan Sistem Maklumat Geografi. Masters thesis, Universiti Putra Malaysia.

Isa, Khalid (2005) Vision-Based Autonomous Vehicle Driving Control System. Masters thesis, Universiti Putra Malaysia.

Islam, S. M. Zahurul (2005) Structural Strength and Behaviour of Cylindrical Steel Sheet Roofing. Masters thesis, Universiti Putra Malaysia.

Kabir, Shamima (2005) Performance Evaluation of a Modified Carrier Sense Multiple Access with Collision Detection Protocol. Masters thesis, Universiti Putra Malaysia.

Kaid Saif Almohai, Hani (2005) An Improved Chromatic Skin Color Model for Detecting Human Skin in JPEG Images. Masters thesis, Universiti Putra Malaysia.

Kamal Bashah, Nagur Aziz (2005) Implementation Of An Electronic Quality Management System Of A Manufacturing Company. Masters thesis, Universiti Putra Malaysia.

Karim, Anayet (2005) Simulation, Design and Construction of a 15 Kv Dc Power Supply Using Voltage Multiplier Circuits. Masters thesis, Universiti Putra Malaysia.

Lee, Wah Peng (2005) Labour Productivity Measurement Method for Malaysian Housing Industry. Doctoral thesis, Universiti Putra Malaysia.

Leong, Jin Hoong (2005) Degradation of 2-Chlokophenol in Water Using Advanced Oxidation Processes. Masters thesis, Universiti Putra Malaysia.

Lim, Che Kiong (2005) Assessing The Coverage, Adequacy and Accessibility of Selected Community Facilities For Malaysian Elderly Based on GIS Approach. Masters thesis, Universiti Putra Malaysia.

M. Ekhmaj, Ahmed I. (2005) Water and Solute Distribution Pattern in Soil Under Point Source Trickle Irrigation. PhD thesis, Universiti Putra Malaysia.

M. Sayuti (2005) Mechanical Properties of The As-Cast Quartz Particulate Reinforced Lm6 Alloy Matrix Composites. Masters thesis, Universiti Putra Malaysia.

Mehedi, Ibrahim Mustapa (2005) Torque Mode-Based Flywheel System For Small Satellite Attitude Control. Masters thesis, Universiti Putra Malaysia.

Mohamed Alajel, Khalid (2005) Face Detection Technique Based on Skin Color and Facial Features. Masters thesis, Universiti Putra Malaysia.

Mohammed Al-Aghbari, Wa'el Abdulmoghni (2005) Factors Affecting Construction Speed of Industrialized Building System in Malaysia. Masters thesis, Universiti Putra Malaysia.

Mohammed Hilmi, Hassan Saad (2005) Estimation of Rice Evapotranspiration in Paddy Fields Using Remote Sensing and Field Measurements. PhD thesis, Universiti Putra Malaysia.

Mohd Arifin Harahap, Rohimah Khoiriyah (2005) Cost Comparison Between Stone Mastic Aspahlt (Sma) And Asphalt Concrete Wearing Course (Acw20). Masters thesis, Universiti Putra Malaysia.

Ooi, Chee Keong (2005) Improving Flexibility in Manufacturing Using a Family Ordering System for Long Lead Time Component. PhD thesis, Universiti Putra Malaysia.

Othman, Maisara (2005) Simulation of Optical Spectrum Code Division Multiple Access in Fibre to the Home Access Network. Masters thesis, Universiti Putra Malaysia.

Rahman, Md. Ataur (2005) Design and Development of a Segmented Rubbe-tracked Vehicle for Sepang Peat Terrain in Malaysia. PhD thesis, Universiti Putra Malaysia.

Ravari, Arastoo Rostami (2005) Channel Modeling and Direction-of-Arrival Estimation in Mobile Multiple-Antenna Communication Systems. PhD thesis, Universiti Putra Malaysia.

Rozanna Dewi, (2005) Thermal Characteristics of Eutectic Mixtures of Fatty Acids as Phase Change Material. Masters thesis, Universiti Putra Malaysia.

S. H. Aldaikh, Hesham (2005) Nonlinear soil-structure interaction analysis of multistorey building. Masters thesis, Universiti Putra Malaysia.

Salem Hussin, Saleh Hussin (2005) Improved Watermarking Algorithm Based on Discrete Wavelet Transform and Fibonacci Permutation. Masters thesis, Universiti Putra Malaysia.

Shaikh, Khurram Niaz (2005) Inertial Navigation System Data Processing For Position Determination. Masters thesis, Universiti Putra Malaysia.

Siew, Choo Soon (2005) Thermal Degradation Rate of Electrode Material for the Alkali Metal Energy Converter. Masters thesis, Universiti Putra Malaysia.

Siregar, Januar Parlaungan (2005) Tensile and Flexural Properties of Arenga Pinnata Filament (Ijuk Filament) Reinforced Epoxy Composites. Masters thesis, Universiti Putra Malaysia.

Soo, Ching Yee (2005) Dynamics And Convergence Accelerations of Rapid Pressure Swing Adsorption. Masters thesis, Universiti Putra Malaysia.

Syed Junid, Syed Alwee Aljunid (2005) Development And Implementation of a Novel Code Family for Optical Code Division Multiple Access Systems. Doctoral thesis, Universiti Putra Malaysia.

Syed Mohamad, Syed Burhanuddin Hilmi (2005) Corrosion assessment on reinforced concrete and its service life prediction. Masters thesis, Universiti Putra Malaysia.

Syed Shaharuddin, Sharifah Imihezri (2005) Design, Analysis And Fabrication Of Glass Fiber-Reinforced Pa 6,6 Composite Automotive Clutch Pedals. Masters thesis, Universiti Putra Malaysia.

T. Hasan, Ali (2005) Development of an Adaptive Algorithm for Solving the Inverse Kinematics Problem for Serial Robot Manipulators. Masters thesis, Universiti Putra Malaysia.

Talebi Taher, Siavash (2005) Development of a New Composite Energy-Absorber System for Aircraft and Helicopter Sub-Floors. Masters thesis, Universiti Putra Malaysia.

Tan, Yan Peng (2005) Purification on a Recombinant Nucleocapsid Protein of Newcastle Disease Virus Using Expanded Bed Adsorption Chromatography. Masters thesis, Universiti Putra Malaysia.

Teoh, Chin Chuang (2005) Improving Classification of Remotely Sensed Data Using Best Band Selection Index and Cluster Labelling Algorithms. PhD thesis, Universiti Putra Malaysia.

Thiagarajah, Sharlene (2005) A Statistical Multi-Cluster Indoor Channel Model in an Office Environment for Ultra-Wideband Signals. PhD thesis, Universiti Putra Malaysia.

Thirunavakkarasu, Punithavathi (2005) Real Time Tracking and Face Recognition Using Web Camera. Masters thesis, Universiti Putra Malaysia.

Yeong, Tak Nging (2005) Design Of 1K Asynchronous Static Random Access Memory Using 0.35 Micron Complementary Metal Oxide Semiconductor Technology. Masters thesis, Universiti Putra Malaysia.

Zahedi, Seyed Hamidreza (2005) Simulation and Optimization of Thermosyphon Solar WateHeater for Kuala Lumpur Climate Using Trnsys Software. Masters thesis, Universiti Putra Malaysia.