Items where Author is "Leman, Zulkiflle "

Bobba, Sujith and Malyadri, T and Leman, Zulkiflle and Jyothula, Suresh K (2024) Mechanical behaviour of silver and copper nanoparticles when incorporated with Polylactic acid nanoparticles. Journal of The Institution of Engineers (India): Series D. pp. 1-15. ISSN 2250-2122; eISSN: 2250-2130

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle (2023) A review of natural fiber-based filaments for 3D Printing: filament fabrication and characterization. Materials, 16 (11). art. no. 4052. pp. 1-16. ISSN 1996-1944

Abdulhadi, Ali Raqee and Ariffin, Khairol Anuar and Leman, Zulkiflle and Ahmad, Siti Azfanizam and Al-Zubaidi, Razi and Abdulsamad, Akram (2023) The impact of internal control on project management in construction site among small and medium enterprises in Iraq. Advances in Social Sciences Research Journal, 10 (3). pp. 247-268. ISSN 2055-0286

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle and Irianto, Unfound (2023) Mechanical, thermal and physical characteristics of oil palm (Elaeis Guineensis) fiber reinforced thermoplastic composites for FDM – Type 3D printer. Polymer Testing, 120. art. no. 107972. pp. 1-11. ISSN 0142-9418; ESSN: 1873-2348

Chang, Choo Khean and Leman, Zulkiflle and Adam, Nor Mariah and Supeni, Eris Elianddy (2023) Indoor climates and energy consumption by air conditioning system in a learning resource centre in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 102 (2). pp. 33-41. ISSN 2289-7879

Chang, Choo Khean and Leman, Zulkiflle and Adam, Nor Mariah and Supeni, Eris Elianddy (2023) Effects of building materials on building thermal load in Malaysian institutional library. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 107 (2). pp. 191-207. ISSN 2289-7879

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle (2023) Investigation of ABS–oil palm fiber (Elaeis guineensis) composites filament as feedstock for fused deposition modeling. Rapid Prototyping Journal, 29 (5). 897 - 909. ISSN 1355-2546; ESSN: 1758-7670

Delgoshaei, Aidin and Mohd Ariffin, Mohd Khairol Anuar and Maleki, Sepehr and Leman, Zulkiflle (2023) Review evolution of dual-resource-constrained scheduling problems in manufacturing systems: modeling and scheduling methods’ trends. Soft Computing, 27 (24). pp. 18489-18528. ISSN 1432-7643; ESSN: 1433-7479

Delgoshaei, Aidin and Beighizadeh, Razieh and Mohd Arffin, Mohd Khairol Anuar and Leman, Zulkiflle and Ali, Ahad (2022) Forecast innovative development level in green supply chains using a comprehensive fuzzy algorithm. International Journal of Fuzzy Systems, 25 (2). pp. 880-895. ISSN 1562-2479; ESSN: 2199-3211

Delgoshaei, Aidin and Mohd Ariffin, Mohd Khairol Anuar and Leman, Zulkiflle (2022) An effective 4–phased framework for scheduling job-shop manufacturing systems using weighted NSGA-II. Mathematics, 10 (23). art. no. 4607. pp. 1-28. ISSN 2227-7390

Zainal Abidin, Muhammad Harith and Leman, Zulkiflle and Mohd Yusof, Zainal Abidin and Khalili, Amjad (2022) Lean impact on manufacturing productivity: a case study of industrialized building system (IBS) manufacturing factory. Jurnal Teknologi, 84 (4). 65 - 77. ISSN 0127-9696; ESSN: 2180-3722

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle and Anak Lukista, Debby Dyne and Irianto and Ghazali, Ihwan (2022) Application of Taguchi method to optimize the parameter of Fused Deposition Modeling (FDM) using oil palm fiber reinforced thermoplastic composites. Polymers, 14 (11). art. no. 2140. pp. 1-15. ISSN 2073-4360

Arunasalam, Mageswaran and Leman, Zulkiflle and Baharudin, B. T. Hang Tuah and Sulaiman, Shamsuddin and Das, Charles Santhakumar Anthony (2022) Challenges in minimizing copper dissolution for lead free wave soldering in surface mount technology going towards green manufacturing. International Journal of Precision Engineering and Manufacturing-Green Technology, 9. 645 - 660. ISSN 2288-6206; ESSN: 2198-0810

Zainal Abidin, Muhammad Harith and Leman, Zulkiflle and Mohd Yusof, Zainal Abidin and Ismail, Md Yusof (2022) Scrutinizing the impact of essential lean methods on sustainable performance in Malaysian manufacturing firms. Jurnal Teknologi, 84. art. no. 5. pp. 11-25. ISSN 0127-9696; eISSN: 2180-3722

Mohammed Sabbar, Huda and Leman, Zulkiflle and Shamsudin, Shazarel and Mohd Tahir, Suraya and Jaafar, Che Nor Aiza and Mohamed Ariff, Azmah Hanim and Zahari, Nur Ismarrubie and Rady, Mohammed H. (2021) The effect of solid-State processes and heat treatment on the properties of AA7075 aluminum waste recycling nanocomposite. Materials, 14 (21). art. no. 6667. pp. 1-20. ISSN 1996-1944

Shah Faisal Khan, Sherwani and Zainudin, Edi Syams and Salit, Mohd Sapuan and Leman, Zulkiflle and Abdan, Khalina (2021) Physical, mechanical, and morphological properties of treated sugar palm/glass reinforced poly(lactic acid) hybrid composites. Polymers, 13 (21). art. no. 3620. pp. 1-25. ISSN 2073-4360

Msebawi, Muntadher Sabah and Leman, Zulkiflle and Shamsudin, Shazarel and Mohd Tahir, Suraya and Jaafar, Che Nor Aiza and Mohamed Ariff, Azmah Hanim and Zahari, Nur Ismarrubie and Rady, Mohammed H. (2021) The effects of CuO and SiO2 on aluminum AA6061 hybrid nanocomposite as reinforcements: a concise review. Coatings, 11 (8). art. no. 972. pp. 1-20. ISSN 2079-6412

Shah Faisal Khan, Sherwani and Salit, Mohd Sapuan and Leman, Zulkiflle and Zainudin, Edi Syams and Abdan, Khalina (2021) Physical, mechanical and morphological properties of sugar palm fiber reinforced polylactic acid composites. Fibers and Polymers, 22 (11). 3095 - 3105. ISSN 1229-9197; ESSN: 1875-0052

Rahamaddulla, Syed Radzi and Leman, Zulkiflle and Baharudin, B. T. Hang Tuah and Ahmad, Siti Azfanizam (2021) Conceptualizing smart manufacturing readiness-maturity model for Small and Medium Enterprise (SME) in Malaysia. Sustainability, 13 (17). art. no. 9793. pp. 1-18. ISSN 2071-1050

Faisal Khan, Sherwani Shah and Salit, Mohd Sapuan and Leman, Zulkiflle and Zainudin, Edi Syams and Abdan, Khalina (2021) Effect of alkaline and benzoyl chloride treatments on the mechanical and morphological properties of sugar palm fiber-reinforced poly(lactic acid) composites. Textile Research Journal, 92 (3-4). pp. 1-33. ISSN 0040-5175; ESSN: 1746-7748

Mohd Nor, N. A. and Baharudin, B. T. Hang Tuah and Ghani, G. A. and Mohd Ariffin, Mohd Khairol Anuar and Leman, Zulkiflle and Ismail, Nazarul Abidin and A., Ginting (2021) Effect of increasing spindle speed at a constant chip load on cutting force behaviour of Hastelloy X. International Journal of Automotive and Mechanical Engineering, 18 (2). 8658 - 8667. ISSN 2229-8649; ESSN: 2180-1606

Ngah, A. Rahmad and Salman, Suhad D. and Leman, Zulkiflle and Salit, Mohd Sapuan and Alkbir, Munir Faraj Almbrouk and Januddi, Fatihhi (2021) Effects of drilling parameters on delamination of kenaf-glass fibre reinforced unsaturated polyester composites. Journal of Industrial Textiles, 51 (2 suppl.). 3057S-3076S. ISSN 1528-0837; ESSN: 1530-8057

Rabby, Md Insiat Islam and Masuri, Siti Ujila and Samsul Kamal, Ahmad Syakir Fariz and Leman, Zulkiflle and Hairuddin, Abdul Aziz and Abdul Aziz, Nuraini (2021) Flow characteristics of disk bypass Pipeline Inspection Gauge (PIG) in natural gas pipelines using computational fluid dynamics. CFD Letters, 13 (4). pp. 11-37. ISSN 2180-1363

Bobba, Sujith and Leman, Zulkiflle and Zainudin, Edi Syams and Salit, Mohd Sapuan (2021) Impact and internal pressure failure of E-glass and S-glass epoxy composite elbow pipe joints influenced by sea water. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235 (1). pp. 1-8. ISSN 0954-4089; ESSN: 2041-3009

Kirmasha, Yasir Khaleel and Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq (2020) Mechanical performance of unstitched and silk fiber-stitched woven kenaf fiber reinforced epoxy composites. Materials, 13 (21). pp. 1-14. ISSN 1996-1944

Sabbar, H. M. and Leman, Zulkiflle and Rady, Mohammed H. and Shamsudin, S. and Mohd Tahir, Suraya and Jaafar, C. N. Aiza and Mohamed Ariff, Azmah Hanim and Zahari, Nur Ismarrubie and Msebawi, M. S. (2020) Mechanical and physical properties of micro alumina reinforced direct recycled AA6061 chips based matrix by hot extrusion process. International Journal of Mechanical and Mechatronics Engineering, 20 (3). 32 - 41. ISSN 2227-2771; ESSN: 2077-124X

Mohd Nor, Nor Aznan and Baharudin, B. T. Hang Tuah and Ghani, Jaharah and Leman, Zulkiflle and Mohd Ariffin, Mohd Khairol Anuar (2020) Effect of chip load and spindle speed on cutting force of Hastelloy X. Journal of Mechanical Engineering and Sciences, 14 (1). 6497 - 6503. ISSN 2289-4659; ESSN: 2231-8380

Mukhtar, Isma’ila and Leman, Zulkiflle and Zainudin, Edi Syams and Ishak, Mohamad Ridzwan (2020) Effectiveness of alkali and sodium bicarbonate treatments on sugar palm fiber: mechanical, thermal, and chemical investigations. Journal of Natural Fibers, 17 (6). 877 - 889. ISSN 1544-0478; ESSN: 1544-046X

Bobba, Sujith and Leman, Zulkiflle and Sapuan, Salit M. and Zainudin, Edi Syams (2019) Analysis on the impact behaviors of E and S-glass composite elbow pipe joints exposed to impact loading followed by axial compression: analysis on impact and compression of elbow joints. International Journal of Manufacturing, Materials, and Mechanical Engineering, 9 (3). pp. 14-25. ISSN 2156-1680; ESSN: 2156-1672

Mohd Roslim, Muhammad Huzaifah and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan (2019) Comparative study of physical, mechanical, and thermal properties of sugar palm fiber (Arenga pinnata) reinforced vinyl ester composites obtained from different geographical locations. BioResources, 14 (1). pp. 619-637. ISSN 1930-2126

Salit @ Sinon, Mohd Sapuan and Rushdan, Ahmad Ilyas and Ishak, Muhammad Ammar and Leman, Zulkiflle and Mohd Roslim, Muhammad Huzaifah and Ishak, Muhammad Ammar and Mahamud, Siti Nur Atikah (2019) Development of sugar palm-based products: a community project. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton, Florida, 245 - 265. ISBN 9781498753029; EISBN: 9780429443923

Mohd Roslim, Muhammad Huzaifah and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan (2019) Effect of fibre loading on the physical, mechanical and thermal properties of sugar palm fibre reinforced vinyl ester composites. Fibers and Polymers, 20 (5). pp. 1077-1084. ISSN 1229-9197; ESSN: 1875-0052

Chandrasekar, Muthukumar and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Leman, Zulkiflle and Shahroze Ali, Rao Muhammad (2019) Effect of freezing temperature and stacking sequence on the mechanical properties of hybrid fibre metal laminates made with carbon, flax, and sugar palm fibres. BioResources, 14 (2). pp. 3042-3056. ISSN 1930-2126

Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq (2019) Fatigue life prediction of textile/woven hybrid composites. In: Durability and Life Prediction in Biocomposites, Fibre- Reinforced Composites and Hybrid Composites. Woodhead Publishing Series in Composites Science and Engineering . Woodhead Publishing, United Kingdom, 63 - 82. ISBN 9780081022900

Bobba, Sujith and Leman, Zulkiflle and Zainudin, Edi Syams and Salit, Mohd Sapuan (2019) Hoop tensile strength behaviour between different thicknesses E-glass and S-glass FRP rings. AIMS Materials Science, 6 (3). pp. 315-327. ISSN 2372-0468; ESSN: 2372-0484

Isma'ila, Mukhtar and Leman, Zulkiflle and Zainudin, Edi Syams and Ishak, Mohamad Ridzwan (2019) Hybrid and nonhybrid laminate composites of sugar palm and glass fibre-reinforced polypropylene: effect of alkali and sodium bicarbonate treatments. International Journal of Polymer Science, 2019. art. no. 230592. pp. 1-12. ISSN 1687-9422; ESSN: 1687-9430

Rashid, Bushra and Leman, Zulkiflle and Mohammed, Aymen R. and Jawaid, Mohammad (2019) Mechanical and thermal properties of sugar palm fiber (Arenga pinnata)–reinforced phenolic composites. In: Sugar Palm Biofibers, Biopolymers, and Biocomposites. CRC Press, U.S.A, 129 - 143. ISBN 9781498753029; EISBN: 9780429443923

Ishak, Muhammad Ammar and Mohd Roslim, Muhammad Huzaifah and Salit @ Sinon, Mohd Sapuan and Leman, Zulkiflle (2019) Mechanical properties of environment-friendly sugar palm fibre reinforced vinyl ester composites at different fibre arrangements. EnvironmentAsia, 12 (1). pp. 25-35. ISSN 1906-1714; ESSN: 2586-8861

Bobba, Sujith and Leman, Zulkiflle and Zainuddin, Edi Syams and Sapuan, Mohd Sapuan (2019) Study of interior temperature distribution and implementation of smart materials In the truck cabin during summer conditions. Materials Today: Proceedings, 18 (pt.1). pp. 361-374. ISSN 2214-7853

Mukhtar, Isma'ila and Leman, Zulkiflle and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams (2019) Sugar palm fiber– reinforced polymer hybrid composites: an overview. In: Sugar Palm Biofibers, Biopolymers, and Biocomposites. CRC Press, Boca Raton, 145 - 163. ISBN 9781498753029; EISBN: 9780429443923

Salit, Mohd Sapuan and C. C. Y., Adrian and Sanyang, Muhammed Lamin and Ishak, Mohamad Ridzwan and Leman, Zulkiflle and Hadi, Agung Efriyo (2019) Sugar palm: challenges and opportunities. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton, 1 - 14. ISBN 9781498753029; EISBN: 9780429443923

Salman, Suhad Dawood and Md Zain, Aini Nazmin and Leman, Zulkiflle (2018) Effect of natural durian skin on mechanical and morphological properties of Kevlar composites in structural applications. Journal of Engineering and Sustainable Development, 22 (2 pt. 3). 1-Sep. ISSN 2520-0917

Alkateb, Mohamed and Salit, Mohd Sapuan and Leman, Zulkiflle and Jawaid, Mohammad and Ishak, Mohamad Ridzwan (2018) Crushing behavior of kenaf fiber/wooden stick reinforced epoxy hybrid “green” composite elliptical tubes. Polimery, 63 (6). 436- 443. ISSN 0032-2725

Shahroze Ali, Rao Muhammad and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Leman, Zulkiflle and Khan, Mohammad Asim and Muthukumar, Chandrasekar (2018) Effect of organo-modified nanoclay on the mechanical properties of sugar palm fiber-reinforced polyester composites. BioResources, 13 (4). 7430 - 7444. ISSN 1930-2126

Alkateb, Mohamed and Salit, Mohd Sapuan and Leman, Zulkiflle and Jawaid, Mohammad and Ishak, Mohamad Ridzwan (2018) Quasi-static crush behaviour of environmentally friendly kenaf/wool epoxy composites elliptical tube. Journal of Mechanical Engineering and Sciences, 12 (2). 3671 - 3688. ISSN 2289-4659; ESSN: 2231-8380

Yahaya, Ridwan and Salit, Mohd Sapuan and Mohammad, Jawaid and Leman, Zulkiflle and Zainudin, Edi Syams (2018) Review of kenaf reinforced hybrid biocomposites: potential for defence applications. Current Analytical Chemistry, 14 (3). 226 - 240. ISSN 1573-4110; EISSN: 1875-6727

Isma'ila, Mukhtar and Leman, Zulkiflle and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams (2018) Thermal and physicochemical properties of sugar palm fibre treated with borax. IOP Conference Series: Materials Science and Engineering, 368. art. no. 012038. pp. 1-8. ISSN 1757-8981; EISSN: 1757-899X

Alkateb, Mohamed and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan and Jawaid, Mohammad (2018) Vertex angles effects in the energy absorption of axially crushed kenaf fibre-epoxy reinforced elliptical composite cones. Defence Technology, 14 (4). 327 - 335. ISSN 2214-9147

Salit, Mohd Sapuan and Ishak, Muhammad Ammar and Leman, Zulkiflle and Ishak, Mohamad Ridzwan (2018) Water absorption of environment friendly sugar palm fibre reinforced vinyl ester composites at different fibre arrangements. Trends in Textile Engineering and Fashion Technology, 3 (1). pp. 262-265. ISSN 2578-0271

Alkateb, Mohamed and Salit, Mohd Sapuan and Leman, Zulkiflle and Jawaid, Mohammad and Ishak, Mohamad Ridzwan (2017) Energy absorption capacities of kenaf fibre-reinforced epoxy composite elliptical cones with circumferential holes. Fibers and Polymers, 18 (6). pp. 1187-1192. ISSN 1229-9197; ESSN: 1875-0052

Mohd Roslim, Muhammad Huzaifah and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan (2017) Comparative study on chemical composition, physical, tensile and thermal properties of sugar palm fiber (Arenga pinnata) obtained from different geographical locations. BioResources, 12 (4). pp. 9366-9382. ISSN 1930-2126

Rashid, Bushra and Leman, Zulkiflle and Jawaid, Mohammad and Ghazali, Mariyam Jameelah and Ishak, Mohamad Ridzwan (2017) Dynamic mechanical analysis of treated and untreated sugar palm fibre based phenolic composites. Composites; Sugar palm fibre; Phenolic; Treatment; DMA, 12 (2). pp. 3448-3462. ISSN 1930-2126

Rashid, Bushra and Leman, Zulkiflle and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and Al-Oqla, Faris M. (2017) Eco-friendly composites for brake pads from agro waste: a review. In: Reference Module in Materials Science and Materials Engineering. Elsevier, United Kingdom. ISBN 9780128035818

Rashid, Bushra and Leman, Zulkiflle and Jawaid, Mohammad and Ghazali, Mariyam Jameelah and Ishak, Mohamad Ridzwan (2017) Influence of treatments on the mechanical and thermal properties of sugar palm fibre reinforced phenolic composites. BioResources, 12 (1). pp. 1447-1462. ISSN 1930-2126

Mohd Roslim, Muhammad Huzaifah and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan and Maleque, Md. Abdul (2017) A review of sugar palm (Arenga pinnata): application, fibre characterisation and composites. Multidiscipline Modeling in Materials and Structures, 13 (4). pp. 678-698. ISSN 1573-6105; ESSN: 1573-6113

Rashid, Bushra and Leman, Zulkiflle and Jawaid, Mohammad and Ghazali, Mariyam Jameelah and Ishak, Mohamad Ridzwan (2016) The mechanical performance of sugar palm fibres (Ijuk) reinforced phenolic composites. International Journal of Precision Engineering and Manufacturing, 17 (8). pp. 1001-1008. ISSN 2234-7593

Salman, Suhad D. and Leman, Zulkiflle and H. Sultan, Mohamed T. and Ishak, Mohamad R. and Cardona, Francisco (2016) Ballistic impact resistance of plain woven kenaf/aramid reinforced polyvinyl butyral laminated hybrid composite. Bioresources, 11 (3). pp. 7282-7295. ISSN 1930-2126; ESSN: 1930-2126

Yahaya, Ridwan and Salit, Mohd Sapuan and Jawaid, Mohammad and Leman, Zulkiflle and Zainudin, Edi Syams (2016) Effect of fibre orientations on the mechanical properties of kenaf–aramid hybrid composites for spall-liner application. Defence Technology, 12 (1). pp. 52-58. ISSN 2214-9147

Salman, Suhad D. and Leman, Zulkiflle and H. Sultan, M. T. and Ishak, M. R. and Cardona, Francisco (2016) Effect of kenaf fibres on trauma penetration depth and ballistic impact resistance for laminated composites. Textile Research Journal, 87 (17). 2051 - 2065. ISSN 0040-5175; ESSN: 1746-7748

Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Mohamed Ariff, Azmah Hanim (2016) Effects of Kenaf Fiber Orientation on Mechanical Properties and fatigue Life of Glass/Kenaf Hybrid Composites. BioResources, 11 (1). pp. 1448-1465. ISSN 1930-2126

Sharba, Mohaiman Jaffar and Salman, Suhad Dawood and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Mohamed Ariff, Azmah Hanim (2016) Effects of processing method, moisture content, and resin system on physical and mechanical properties of woven kenaf plant fiber composites. BioResources, 11 (1). pp. 1466-1476. ISSN 1930-2126

Salman, Suhad Dawood and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Cardona, Francisco (2016) Influence of fiber content on mechanical and morphological properties of woven kenaf reinforced PVB film produced using a hot press technique. International Journal of Polymer Science, 2016. art. no. 7828451. pp. 1-11. ISSN 1687-9422; ESSN: 1687-9430

Yahaya, Ridwan and Salit, Mohd Sapuan and Jawaid, Mohammad and Leman, Zulkiflle and Zainudin, Edi Syams (2016) Investigating ballistic impact properties of woven kenaf-aramid hybrid composites. Fibers and Polymers, 17 (2). pp. 275-281. ISSN 1229-9197; ESSN: 1875-0052

Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Mohamed Ariff, Azmah Hanim (2016) Partial replacement of glass fiber by woven kenaf in hybrid composites and its effect on monotonic and fatigue properties. Bioresources, 11 (1). pp. 2665-2883. ISSN 1930-2126

Rashid, Bushra and Leman, Zulkiflle and Jawaid, Mohamad and Ghazali, Mariyam Jameelah and Ishak, Mohamad Ridzwan (2016) Physicochemical and thermal properties of lignocellulosic fiber from sugar palm fibers: effect of treatment. Cellulose, 23 (5). pp. 2905-2916. ISSN 0969-0239; ESSN: 1572-882X

Misri, Sairizal and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Leman, Zulkiflle (2016) Split-disk properties of kenaf yarn fibre-reinforced unsaturated polyester composites using filament winding method. Pertanika Journal of Science & Technology, 24 (2). pp. 475-482. ISSN 0128-7680; ESSN: 2231-8526

Mukhtar, Isma'ila and Leman, Zulkiflle and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams (2016) Sugar palm fibre and its composites: a review of recent developments. BioResources, 11 (4). pp. 10756-10782. ISSN 1930-2126

Salman, Suhad D. and Sharba, Mohaiman J. and Leman, Zulkiflle and H. Sultan, Mohamed T. and Ishak, Mohamad R. and Cardona, Francisco (2016) Tension-compression fatigue behavior of plain woven kenaf/kevlar hybrid composites. Bioresources, 11 (2). pp. 3575-3586. ISSN 1930-2126; ESSN: 1930-2126

Salman, Suhad Dawood and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Cardona, Francisco (2016) The effect of stacking sequence on tensile properties of hybrid composite materials. Malaysian Journal of Civil Engineering, 28 (spec.1). pp. 10-17. ISSN 1823-7843

Salman, Suhad D. and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Cardona, Francisco (2016) The effects of orientation on the mechanical and morphological properties of woven kenaf-reinforced poly vinyl butyral film. BioResources, 11 (1). pp. 1176-1188. ISSN 1930-2126

Delgoshaei, Aidin and Mohd Ariffin, Mohd Khairol and Baharudin, Btht Hang Tuah and Leman, Zulkiflle (2016) A new method for decreasing cell-load variation in dynamic cellular manufacturing systems. International Journal of Industrial Engineering Computations, 7 (1). pp. 83-110. ISSN 1923-2926; ESSN: 1923-2934

Misri, Sairizal and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Leman, Zulkiflle (2015) The effect of winding angles on crushing behavior of filament wound hollow kenaf yarn fibre reinforced unsaturated polyester composites. Fibers and Polymers, 16 (10). pp. 2266-2275. ISSN 1229-9197; ESSN: 1875-0052

Misri, Sairizal and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan (2015) Torsional behaviour of filament wound kenaf yarn fibre reinforced unsaturated polyester composite hollow shafts. Materials and Design, 65. pp. 953-960. ISSN 0264-1275; ESSN: 1873-4197

Misri, Sairizal and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Leman, Zulkiflle (2015) Filament winding process for kenaf fibre reinforced polymer composites. In: Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer International Publishing Switzerland, Cham, pp. 369-383. ISBN 9783319079431; EISBN: 9783319079448

Salman, Suhad D. and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Cardona, Francisco (2015) Influence of resin system on the energy absorption capability and morphological properties of plain woven kenaf composites. In: 3rd International Conference of Mechanical Engineering Research (ICMER 2015), 18–19 Aug. 2015, Zenith Hotel, Kuantan, Pahang. (pp. 1-8).

Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Leman, Zulkiflle and Delgoshaei, Aidin (2015) Minimizing makespan of a resource-constrained scheduling problem: a hybrid greedy and genetic algorithms. International Journal of Industrial Engineering Computations, 6 (4). pp. 503-520. ISSN 1923-2934; ESSN: 1923-2926

Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Mohamed Ariff, Azmah Hanim (2015) Monotonic and fatigue properties of kenaf /glass hybrid composites under fully reversed cyclic loading. In: 3rd International Conference of Mechanical Engineering Research (ICMER 2015), 18–19 Aug. 2015, Zenith Hotel, Kuantan, Pahang. (pp. 1-8).

Salman, Suhad D. and Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Cardona, Francisco (2015) Physical, mechanical, and morphological properties of woven kenaf/polymer composites produced using a vacuum infusion technique. International Journal of Polymer Science, 2015. art. no. 894565. pp. 1-11. ISSN 1687-9422; ESSN: 1687-9430

Gholizadeh, Somayyeh and Leman, Zulkiflle and Baharudin, B. T. Hang Tuah (2015) A review of the application of acoustic emission technique in engineering. Structural Engineering and Mechanics, 54 (6). pp. 1075-1095. ISSN 1225-4568; ESSN: 1598-6217

Yahaya, Ridwan and Salit, Mohd Sapuan and Jawaid, Mohammad and Leman, Zulkiflle and Zainudin, Edi Syams (2014) Quasi-static penetration and ballistic properties of kenaf-aramid hybrid composites. Materials and Design, 63. pp. 775-782. ISSN 0264-1275; ESSN: 1873-4197

Kasim, Nazrul Idzham and Leman, Zulkiflle and Musa, Mohd Azam and Baharudin, B. T. Hang Tuah (2014) Cab transfer process improvement at an automotive manufacturing facility. Applied Mechanics and Materials, 564. pp. 105-109. ISSN 1660-9336; ESSN: 1662-7482

Yahaya, Ridwan and Salit, Mohd Sapuan and Jawaid, Mohammad and Leman, Zulkiflle and Zainudin, Edi Syams (2014) Effect of post curing, fibre content and resin-hardener mixing ratio on the properties of kenaf-aramid hybrid composites. Applied Mechanics and Materials, 548-549. pp. 7-11. ISSN 1660-9336; ESSN: 1662-7482

Moayedfar, Majid and Leman, Zulkiflle and Baharudin, B. T. Hang Tuah (2014) Incremental sheet forming (ISF) of AISI 316 stainless steel sheet using CNC milling machine. Advanced Materials Research, 939. pp. 322-327. ISSN 1022-6680; ESSN: 1662-8985

Yahaya, Ridwan and Salit, Mohd Sapuan and Jawaid, Mohammad and Leman, Zulkiflle and Zainudin, Edi Syams (2014) Mechanical performance of woven kenaf-Kevlar hybrid composites. Journal of Reinforced Plastics and Composites, 33 (24). pp. 2242-2254. ISSN 0731-6844; ESSN: 1530-7964

Molamohamadi, Zohreh and Ismail, Napsiah and Leman, Zulkiflle and Zulkifli, Norzima (2014) Reviewing the literature of inventory models under trade credit contact. Discrete Dynamics in Nature and Society, 2014. art. no. 975425. pp. 1-19. ISSN 1026-0226; ESSN: 1607-887X

Yahaya, Ridwan and Salit, Mohd Sapuan and Leman, Zulkiflle and Zainudin, Edi Syams (2014) Selection of natural fibre for hybrid laminated composites vehicle spall liners using analytical hierarchy process (AHP). Applied Mechanics and Materials, 564. pp. 400-405. ISSN 1660-9336; ESSN: 1662-7482

Misri, Sairizal and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan (2014) Tensile properties of kenaf yarn fibre reinforced unsaturated polyester composites at different fibre orientations. Applied Mechanics and Materials, 564. pp. 412-417. ISSN 1660-9336; ESSN: 1662-7482

B. T. Hang Tuah Baharudin (2013) Portable constant load tensile-corrosion test system. PI2013701936.

Molamohamadi, Zohreh and Ismail, Napsiah and Leman, Zulkiflle and Zulkifli, Norzima (2013) Supplier selection in a sustainable supply chain. Journal of Advanced Management Science, 1 (3). pp. 278-281. ISSN 2168-0787

Ismail, Napsiah and Baharudin, B. T. Hang Tuah and Musa, Yusaini and Leman, Zulkiflle (2013) Overall equipment effectiveness improvement through total productive maintenance in assembly cell. International Journal of Customer Relationship Marketing and Management, 4 (1). pp. 13-27. ISSN 1947-9247; ESSN: 1947-9255

Ishak, Mohamad Ridzwan and Leman, Zulkiflle and Salit, Mohd Sapuan and Ab. Rahman, Mohamad Zaki and Anwar, U. M. K. (2013) Chemical composition and FT-IR spectra of sugar palm (Arenga pinnata) fibers obtained from different heights. Journal of Natural Fibers, 10 (2). pp. 83-97. ISSN 1544-0478; ESSN: 1544-046X

Falatoonitoosi, Elham and Leman, Zulkiflle and Sorooshian, Shahryar and Salimi, Meysam (2013) Decision-making trial and evaluation laboratory. Research Journal of Applied Sciences, Engineering and Technology, 5 (13). pp. 3476-3480. ISSN 2040-7459; ESSN: 2040-7467

Darestani, Soroush Avakh and Houshyar, Afsaneh Noori and Ismail, Napsiah and Leman, Zulkiflle (2013) Improving purchasing performance by implementation of QMS process management approach in a manufacturing company. Advanced Materials Research, 622-623. pp. 1868-1872. ISSN 1022-6680; ESSN: 1662-8985

Khor, Ling Si and Leman, Zulkiflle and Lee, Ching Hao (2013) Interfacial debonding force and shear strength of sugar palm (Arenga pinnata) fiber reinforced composites by pull-out test. Advanced Materials Research, 634-638. pp. 1931-1936. ISSN 1022-6680; ESSN: 1662-8985

Falatoonitoosi, Elham and Leman, Zulkiflle and Sorooshian, Shahryar (2013) Modeling for green supply chain evaluation. Mathematical Problems in Engineering, 2013. art. no. 201208. pp. 1-9. ISSN 1024-123X; ESSN: 1563-5147

Leman, Zulkiflle and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Abdul Rahman, Mohd Rosdzimin and Uyup, Mohd Khairun Anwar and Siregar, Januar Parlaungan (2013) Sugar palm (Arenga pinnata): Its fibres, polymers and composites. Carbohydrate Polymers, 91 (2). pp. 699-710. ISSN 0144-8617

Ibrahim, Abu Hatim and Leman, Zulkiflle and Salit, Mohd Sapuan (2013) Tensile properties of impregnated sugar palm (Arenga pinnata) fibre composite filled thermosetting polymer composites. Advanced Materials Research, 701. pp. 8-11. ISSN 1022-6680; ESSN: 1662-8985

Moayedfar, Majid and Leman, Zulkiflle and Mirabi, Hamed and Baharudin, B. T. Hang Tuah (2013) The effect of forming parameters on the sheet stretch in incremental sheet forming (ISF) process on CNC lathe machine. Advanced Materials Research, 634-638. pp. 2894-2898. ISSN 1022-6680; ESSN: 1662-8985

Leman, Zulkiflle and Mohammad Borhan, and Kheiri, Abouzar (2012) Feasibility study of liquefied petroleum gas composite cylinder for household users in Malaysia. In: World Research & Innovation Convention on Engineering & Technology 201 2, 3-5 Dec. 2012, Kuala Lumpur, Malaysia. (pp. 26-28).

Ahmad, M. Syahrir and Baharudin, B. T. Hang Tuah and Leman, Zulkiflle and Ismail, Napsiah and Sulaiman, Shamsuddin (2012) Thermal parameter affects on the part built using 3D printer Projet SD 3000. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Leman, Zulkiflle and Salit, Mohd Sapuan (2011) Effects of Impregnation Pressure on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres. Key Engineering Materials, 471-47 (2011). pp. 1153-1158. ISSN 1662-9795

Leman, Zulkiflle and Salit, Mohd Sapuan (2011) Effects of Impregnation Time on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres. Key Engineering Materials, 471-47 (2011). pp. 1147-1152. ISSN 1662-9795

Salit, Mohd Sapuan and Zainudin, Edi Syams and Leman, Zulkiflle and Kho, J. Y. and Ahmed Ali, B. A. and Hambali, Ariff (2011) Materials selection for natural fiber reinforced polymer composites using analytical hierarchy process. Indian Journal of Engineering and Materials Sciences, 18 (4). pp. 255-267. ISSN 0971-4588

Leman, Zulkiflle and Salit, Mohd Sapuan and S., Suppiah (2011) Sugar Palm Fibre-Reinforced Unsaturated Polyester Composite Interface Characterisation by Pull-Out Test. Key Engineering Materials, 471-47 (2011). pp. 1034-1039. ISSN 1013-9826

Ghaderi, Hadi and Darestani, Soroush Avakh and Leman, Zulkiflle and Ismail, Md Yusof (2010) Development of a soft network model to improve supply chain management performance of SMEs. Scientific Research and Essays, 5 (13). art. no. 723913919945. pp. 1759-1764. ISSN 1992-2248

Ishak, Mohamad Ridzwan and Leman, Zulkiflle and Salit, Mohd Sapuan and Edeerozey, A. M. M. and Othman, Intan Sharhida (2010) Mechanical properties of kenaf bast and core fibre reinforced unsaturated polyester composites. IOP Conference Series: Materials Science and Engineering, 11 (1). art. no. 012006. pp. 1-6. ISSN 1757-899X

Leman, Zulkiflle and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Ahmad, M. M. H. M. (2010) Pre-treatment by water retting to improve the interfacial bonding strength of sugar palm fibre reinforced epoxy composite. Polymers from Renewable Resources, 1 (1). pp. 35-45. ISSN 2045-1377

Leman, Zulkiflle (2009) Mechanical properties of sugar palm fibre-reinforced epoxy composites. Doctoral thesis, Universiti Putra Malaysia.

Ishak, Mohamad Ridzwan and Mohamed Yusoff, Mohd Zuhri and Salit, Mohd Sapuan and Leman, Zulkiflle and Abdul Manaf, Mohd Edeerozey and Othman, Intan Sharhida (2009) Comparative study of tensile properties of kenaf bast and core fibre reinforced unsaturated polyester composites. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 700-708).

Abdullah, Abdul Hakim and Ishak, Mohamad Ridzwan and Abdan, Khalina and Leman, Zulkiflle and Salit, Mohd Sapuan (2009) Comparative study on moisture absorption of kenaf bast and core fibre reinforced unsaturated polyester composites. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 326-331).

Misri, Sairizal and Leman, Zulkiflle and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan (2009) Comparison on tensile properties of hybrid and natural woven sugar palm fibre reinforced unsaturated polyester composites. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 226-233).

Mohamed Yusoff, Mohd Zuhri and Ishak, Mohamad Ridzwan and Leman, Zulkiflle and Salit, Mohd Sapuan and Abdul Manaf, Mohd Edeerozey (2009) Effects of moisture content to flexural properties of kenaf bast fibre reinforced unsaturated polyester composites. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 668-672).

Ishak, Mohamad Ridzwan and Wirawan, Riza and Salit, Mohd Sapuan and Leman, Zulkiflle and Abdul Manaf, Mohd Edeerozey and Othman, Intan Sharhida (2009) Flexural and impact properties of kenaf bast and core fibre reinforced unsaturated polyester composites. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 717-723).

Misri, Sairizal and Leman, Zulkiflle and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan (2009) Impact strength of hybrid woven sugar palm fibre reinforced unsaturated polyester composites. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 234-237).

Misri, Sairizal and Leman, Zulkiflle and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan (2009) Mechanical properties and fabrication of small boat using woven glass/sugar palm fibres reinforced unsaturated polyester hybrid composite. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 1-13).

Misri, Sairizal and Leman, Zulkiflle and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan (2009) Method selection for fabrication of small boat application of natural fibre composites. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 238-242).

Ishak, Mohamad Ridzwan and Leman, Zulkiflle and Salit, Mohd Sapuan and Salleh, M. Y. and Misri, Sairizal (2009) The effect of sea water treatment on the impact and flexural strength of sugar palm fibre reinforced epoxy composites. International Journal of Mechanical and Materials Engineering, 4 (3). pp. 316-320. ISSN 1823-0334

Ishak, Mohamad Ridzwan and Leman, Zulkiflle and Salit, Mohd Sapuan and Misri, Sairizal (2009) The effects of fibre content on flexural and impact properties of woven sugar palm fibre reinforced unsaturated polyester composites. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 679-686).

Ishak, Mohamad Ridzwan and Leman, Zulkiflle and Salit, Mohd Sapuan and Misri, Sairizal (2009) The effects of sea water treatment on tensile and impact properties of woven sugar palm fibre reinforced unsaturated polyester composites. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 687-699).

Leman, Zulkiflle and Salit, Mohd Sapuan and Mohamed Zawawi, Mohamed Azwan and Megat Ahmad, Megat Mohamad Hamdan and Maleque, Md Abdul (2008) The Effect of Environmental Treatments on Fiber Surface Properties and Tensile Strength of Sugar Palm Fiber Reinforced Epoxy Composites. Polymer-Plastics Technology and Engineering, 47 (6). 606- 612. ISSN 0360-2559

Leman, Zulkiflle and Salit, Mohd Sapuan and Aaisa, Mohamad Saifol and Md Abdul Maleque, and Megat Ahmad, Megat Mohamad Hamdan (2008) Moisture absorption bahaviour of sugar palm fibre reinforced epoxy composites. Materials and Design, 29 (8). pp. 1666-1670. ISSN 0261-3069; ESSN: 1873-4197

Molla, Md. Abul Hossain and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Leman, Zulkiflle and Ismail, Md. Yusof (2002) Operational characteristics and determination of resistance for effective powering and propulsion of fishing boats of lower Perak River of Malaysia. Pertanika Journal of Science & Technology, 10 (1). pp. 63-71. ISSN 0128-7680