Items where Author is "Ismail, Napsiah "

Aqel, Mohammad O. A. and Marhaban, Mohammad Hamiruce and Saripan, M. Iqbal and Ismail, Napsiah (2017) Estimation of image scale variations in monocular visual odometry systems. IEEJ Transactions on Electrical and Electronic Engineering, 12 (2). pp. 228-243. ISSN 1931-4973; ESSN: 1931-4981

Aqel, Mohammad O. A. and Marhaban, Mohammad Hamiruce and Saripan, M. Iqbal and Ismail, Napsiah (2016) Adaptive-search template matching technique based on vehicle acceleration for monocular visual odometry system. IEEJ Transactions on Electrical and Electronic Engineering, 11 (6). pp. 739-752. ISSN 1931-4973; ESSN: 1931-4981

Firoozi, Zahra and Ismail, Napsiah and Ariafar, Shahram and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Memariani, Azizollah (2014) Cost analysis of two different configurations for a distribution network design. Applied Mechanics and Materials, 564. pp. 656-660. ISSN 1660-9336; ESSN: 1662-7482

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2014) Effect of machining process on surface microhardness of titanium carbide reinforced aluminium LM6 composite. Applied Mechanics and Materials, 564. pp. 495-500. ISSN 1660-9336; ESSN: 1662-7482

Firoozi, Zahra and Ismail, Napsiah and Ariafar, Shahram and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Mamariani, A. (2014) Effects of integration on the cost reduction in distribution network design for perishable products. Mathematical Problems in Engineering, 2014. art. no. 739741. pp. 1-10. ISSN 1024-123X; ESSN: 1563-5147

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2014) Experimental investigation on surface roughness and tool wear in dry machining of TiC reinforced aluminium LM6 composite. Materials Science Forum, 773-774. pp. 339-347. ISSN 0255-5476; ESSN: 1662-9752

Golestaneh, Seyed Jafar and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar and Tang, Sai Hong and Naeini, Hassan Moslemi and Maghsoudi, Ali Asghar and Firoozi, Zahra (2014) Higher desirability in solving multiple response optimization problems with committee machine. Applied Mechanics and Materials, 564. pp. 608-613. ISSN 1660-9336; ESSN: 1662-7482

Sadrnia, Abdolhossein and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar and Zulkifli, Norzima and Boyer, Omid (2014) Reverse logistics network optimizing by genetic algorithm: a case study of automotive wiring harnesses. Applied Mechanics and Materials, 564. pp. 740-746. ISSN 1660-9336; ESSN: 1662-7482

Molamohamadi, Zohreh and Ismail, Napsiah and Leman, Zulkiflle and Zulkifli, Norzima (2014) Reviewing the literature of inventory models under trade credit contact. Discrete Dynamics in Nature and Society, 2014. art. no. 975425. pp. 1-19. ISSN 1026-0226; ESSN: 1607-887X

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2014) Surface quality and chip formation in turning of LM6 aluminium alloy and particulate reinforced metal matrix composite. Materials Science Forum, 773-774. pp. 894-901. ISSN 0255-5476; ESSN: 1662-9752

Molamohamadi, Zohreh and Ismail, Napsiah and Leman, Zulkiflle and Zulkifli, Norzima (2013) Supplier selection in a sustainable supply chain. Journal of Advanced Management Science, 1 (3). pp. 278-281. ISSN 2168-0787

Tang, Sai Hong and Vasili, Mehdi and Vasili, Mohammadreza and Ismail, Napsiah (2013) Application of fixed order period lot sizing rule in capacitated make-to-order production systems. International Journal of Innovation, Management and Technology, 4 (1). pp. 1-5. ISSN 2010-0248

Ismail, Napsiah and Baharudin, B. T. Hang Tuah and Musa, Yusaini and Leman, Zulkiflle (2013) Overall equipment effectiveness improvement through total productive maintenance in assembly cell. International Journal of Customer Relationship Marketing and Management, 4 (1). pp. 13-27. ISSN 1947-9247; ESSN: 1947-9255

Mohd Yusuff, Rosnah and Ismail, Napsiah and Jassbi, Javad and Ismail, Md. Yusof and Beik Zadeh, Mohammad Reza (2013) Assessment Approaches in Business Excellence Models: A Review and Evaluation. Technics Technologies Education Management, 8 (1). pp. 674-682. ISSN 1840-1503

Umar, Ali Umar and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Tang, Sai Hong (2013) Conflict-free automated guided vehicles routing using multi-objective genetic algorithm. Research Journal of Applied Sciences, Engineering and Technology, 6 (14). pp. 2681-2684. ISSN 2040-7459; ESSN: 2040-7467

Tan, Chee Fai and Kher, Vee Kiat and Ismail, Napsiah (2013) Design of a feature recognition system for CAD/CAM integration. World Applied Sciences Journal, 21 (8). pp. 1162-1166. ISSN 1818-4952; ESSN: 1991-6426

Firoozi, Zahra and Ismail, Napsiah and Ariafar, Shahram and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Memariani, Azizollah (2013) Distribution network design for fixed lifetime perishable products: a model and solution approach. Journal of Applied Mathematics, 2013. art. no. 891409. pp. 1-13. ISSN 1110-757X; ESSN:1687-0042

Mariun, Norman and Abdul Wahab, Noor Izzri and Ismail, Napsiah and Mansoor, Muhammad (2013) A Guidance chart for most probable solution directions in sustainable energy developments. Renewable and Sustainable Energy Reviews, 24 (1). art. no. 23. pp. 306-313. ISSN 1364-0321

Darestani, Soroush Avakh and Houshyar, Afsaneh Noori and Ismail, Napsiah and Leman, Zulkiflle (2013) Improving purchasing performance by implementation of QMS process management approach in a manufacturing company. Advanced Materials Research, 622-623. pp. 1868-1872. ISSN 1022-6680; ESSN: 1662-8985

Mansoor, Muhammad and Mariun, Norman and Ismail, Napsiah and Abdul Wahab, Noor Izzri and Toudeshki, Arash Mohammadi and Iqbal, Rizwan and Mohamed Aslam, Mohamed Saleem (2013) Probing potential of knowledge engineering support for electrical engineers – a case study. Life Science Journal, 10 (2). pp. 2714-2720. ISSN 1097-8135; ESSN: 2372-613X

Ng, Sok Choo and Ismail, Napsiah and Ali, Aidy and Sahari, Barkawi and Mohd Yusof, Juraina (2013) Ultrasonic NDE for internal defect detection in multi-layered composite materials by multi-resolution signal decomposition. Journal of Applied Sciences, 13 (1). pp. 87-94. ISSN 1812-5654

Zamri, Ruzaidi and Ismail, Napsiah and Baharudin, B. T. Hang Tuah and Mohamed Ariff, Azmah Hanim and Prabuwono, Anton Satria (2013) Vision sensor application for intelligent polishing robotic cell. Applied Mechanics and Materials, 300-301. pp. 436-439. ISSN 1660-9336; ESSN: 1662-7482

Dodangeh, Javad and Mohd Yusuff, Rosnah and Ismail, Napsiah and Ismail, Md. Yusof and Beik Zadeh, Mohammad Reza and Jassbi, Javad (2013) A review on major business excellence frameworks. Technics Technologies Education Management, 8 (1). pp. 301-309. ISSN 1840-1503

Salit, Mohd Sapuan and Ismail, Napsiah and Dharmalingam, Sivakumar and Ismail, M. Y. (2012) Application of total productive maintenance to reduce non-stick on pad problem in IC packaging. International Journal of Engineering and Science, 3 (1). pp. 14-33. ISSN 2086-3799

Ahmad Bari, Nor Azmi and Abdullah, Nor Ainah and Yusuff, Rosnah and Ismail, Napsiah and Jaapar, Aini (2012) Environmental awareness and benefits of industrialized building systems (IBS). Procedia - Social and Behavioral Sciences, 50. pp. 392-404. ISSN 1877-0428

Ahmad Bari, Nor Azmi and Mohd Yusuff, Rosnah and Ismail, Napsiah and Jaapar, Aini and Ahmad, Rizan (2012) Factors influencing the construction cost of Industrialised Building System (IBS) projects. Procedia - Social and Behavioral Sciences, 35. pp. 689-696. ISSN 1877-0428

Eliaderany, Mehrdad Nikbakht and Zulkifli, Norzima and Ismail, Napsiah and Sulaiman, Shamsuddin and Sadrnia, Abdolhossein and Suleiman, Mohamed (2012) Multi-echelon supply chain design in natural gas industry. World Applied Sciences Journal, 20 (1). pp. 54-63. ISSN 1818-4952; ESSN: 1991-6426

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2012) Optimization of cutting parameters on turning process based on surface roughness using response surface methodology. Applied Mechanics and Materials, 117-119. pp. 1561-1565. ISSN 1660-9336; ESSN: 1662-7482

Mousavi, Maryam and Abdul Aziz, Faieza and Ismail, Napsiah (2012) Virtual reality adoption capability in Malaysian automotive manufacturing industry. Scientific Research and Essays, 7 (2). art. no. D227C6C27330. pp. 158-164. ISSN 1992-2248

Noroziroshan, Alireza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Mustapha, Faizal (2012) A hybrid GA-SA algorithm for multi-objective sequencing problem in high-product mix shop-floor. Applied Mechanics and Materials, 110-116. pp. 3964-3971. ISSN 1660-9336; ESSN: 1662-7482

Mohd Ariffin, Mohd Khairol Anuar and Fathi, Masood and Ismail, Napsiah (2012) A new heuristic method to solve straight assembly line balancing problem. Pertanika Journal of Science & Technology, 20 (2). pp. 355-369. ISSN 0128-7680; ESSN: 2231-8526

Tang, Sai Hong and Khaksar, Weria and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar (2012) A review on robot motion planning approaches. Pertanika Journal of Science & Technology, 20 (1). pp. 15-29. ISSN 0128-7680; ESSN: 2231-8526

Homayouni, Seyed Mahdi and Tang, Sai Hong and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar (2011) Using simulated annealing algorithm for optimization of quay cranes and automated guided vehicles scheduling. International Journal of Physical Sciences, 6 (27). pp. 6286-6294. ISSN 1992-1950

Shahrjerdi, Reza and Mohd Ariffin, Mohd Khairol Anuar and Mustapha, Faizal and Ismail, Napsiah and Esmaeili, Maryam (2011) An integrated inventory models under cooperative and non-cooperative seller-buyer and vendor supply chain. African Journal of Business Management, 5 (20). pp. 8361-8367. ISSN 1993-8233

Ariafar, Sh. and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Firoozi, Z. (2011) A stochastic facility layout model in cellular manufacturing systems. International Journal of the Physical Sciences, 6 (15). pp. 3666-3670. ISSN 1992-1950

Esmaeilian, Gholam Reza and Sulaiman, Shamsuddin and Ismail, Napsiah and Hamedi, Maryam and Megat Ahmad, Megat Mohammad Hamdan (2011) A tabu search approach for mixed-model parallel assembly line balancing problem (type II). International Journal of Industrial and Systems Engineering, 8 (4). pp. 407-431. ISSN 1748-5037; ESSN: 1748-5045

Ariafar, Shahram and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Firoozi, Zahra (2011) Facility layout design for hybrid cellular manufacturing systems. International Journal of Physical Sciences, 6 (14). pp. 3551-3556. ISSN 1992-1950

Noroziroshan, Alireza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Mustapha, Faizal (2011) An optimization technique using hybrid GA-SA algorithm for multi-objective scheduling problem. Scientific Research and Essays, 6 (8). art. no. 587417120543. pp. 1720-1731. ISSN 1992-2248

Karmegam, Karuppiah and Salit, Mohd Sapuan and Ismail, Md Yusof and Ismail, Napsiah and Mohd Tamrin, Shamsul Bahri and Shuib, S. and Krishnan, G. Mohana and Palanimuthu, Seetha and Tamilmoli, P. and Mohd Jusoh, Mohd Hanapi (2011) Anthropometric study among adults of different ethnicity in Malaysia. International Journal of Physical Sciences, 6 (4). pp. 777-788. ISSN 1992-1950

Karuppiah, Karmegam and Salit, Mohd Sapuan and Ismail, Mohd Yusof and Ismail, Napsiah and Mohd Tamrin, Shamsul Bahri and Gobalakrishnan, Mohana Krishnan and Palanimuthu, Seetha and Palaniandy, Thiyagu (2011) Anthropometry of Malaysian young adults. Journal of Human Ergology, 40 (1-2). pp. 37-46. ISSN 0300-8134; ESSN: 1884-3964

Karuppiah, Karmegam and Salit, Mohd Sapuan and Ismail, Mohd Yusof and Ismail, Napsiah and Mohd Tamrin, Shamsul Bahri (2011) Conceptual design of motorcycle's lumbar support using motorcyclists' anthropometric characteristics. Maejo International Journal of Science and Technology, 5 (1). pp. 69-82. ISSN 1905-7873; ESSN: 2697-4746

Salit, Mohd Sapuan and Ismail, Napsiah and Hambali, Ariff and Samsudin, Abdul Rahim and Yusoff, Nukman (2011) Concurrent decisions on design concept and material selection using analytical hierarchy process at the conceptual design stage. Concurrent Engineering: Research and Applications, 19 (2). pp. 111-121. ISSN 1063-293X

Suhail, Adeel H. and Ismail, Napsiah and Wong, Shaw Voon and Abdul Jalil, Nawal Aswan (2011) Cutting parameters identification using multi adaptive network based fuzzy inference system: an artificial intelligence approach. Scientific Research and Essays, 6 (1). art. no. 6E1102E17546. pp. 187-195. ISSN 1992-2248

Ariafar, Shahram and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Firoozi, Zahra (2011) Design of a facility layout model in hybrid cellular manufacturing systems under variable demand. International Journal of Industrial and Systems Engineering, 9 (4). pp. 373-387. ISSN 1748-5037; ESSN: 1748-5045

Seyajah, Norhisham and Abdul Aziz, Faieza and Ismail, Napsiah and Salit, Mohd Sapuan and Ibrahim, Mohd Shukri (2011) Flexural mechanical characteristic of sawdust and chipwood filled epoxy composites. Key Engineering Materials, 471-472. pp. 1064-1069. ISSN 1013-9826; ESSN: 1662-9795

Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin and Yusuf, Muhammad (2011) Influence of cutting parameters on surface roughness for wet and dry turning process. Key Engineering Materials, 471-472 (1). pp. 233-238. ISSN 1013-9826

Bakhtiari, Mohd Reza and Ahmad, Desa and Othman, Jamarei and Ismail, Napsiah (2011) Physical and mechanical properties of kenaf seed. Applied Engineering in Agriculture, 27 (2). pp. 263-268. ISSN 0883-8542; ESSN: 1943-7838

Ismail, Napsiah and Ng, S. C. (2011) Reconstruction of the 3D Object Model: A review. SEGi Review, 4 (2). pp. 18-30. ISSN 1985-5672

Seyajah, Norhisham and Abdul Aziz, Faieza and Ismail, Napsiah and Salit, Mohd Sapuan and Ibrahim, Mohd Shukri (2011) Tensile properties and micromorphologies of sawdust and chipwood filled epoxy composites. Key Engineering Materials, 471-472. pp. 1070-1074. ISSN 1013-9826; ESSN: 1662-9795

Wan Ismail, Wan Ishak and Ismail, Napsiah and Sulaiman, Md. Nasir and Mohamed Shariff, Abd Rashid and Razali, Mohd Hudzari (2011) Videogrammetry application for stereo vision Bio-Production Harvester. Trends in Applied Sciences Research, 6 (5). pp. 495-506. ISSN 1819-3579

Suhail, Adeel H. and Ismail, Napsiah and Wong, Shaw Voon and Abdul Jalil, Nawal Aswan (2011) Workpiece surface temperature for in-process surface roughness prediction using response surface methodology. Journal of Applied Sciences, 11 (2). pp. 308-315. ISSN 1812-5654; ESSN: 1812-5662

Golestaneh, Seyed Jafar and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Naeini, Hassan Moslemi and Maghsoudi, Ali Asghar (2011) A committee machine approach to multiple response optimization. International Journal of the Physical Sciences, 6 (35). art. no. F8D798124547. pp. 7935-7949. ISSN 1992-1950

Darestani, Soroush Avakh and Ismail, Md. Yusof and Ismail, Napsiah and Mohd Yusuff, Rosnah (2011) A material and product audit method for determining the level of quality. Advanced Materials Research, 264-265. pp. 1714-1718. ISSN 1022-6680; ESSN: 1662-8985

Fathi, Masood and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah (2010) A note on “A multi-objective genetic algorithm for solving assembly line balancing problem”. International Journal of Advanced Manufacturing Technology, 50 (5-8). pp. 771-773. ISSN 0268-3768; ESSN: 1433-3015

Darestani, Soroush Avakh and Ismail, Md. Yusof and Ismail, Napsiah (2010) Recognition of nonrandom patterns on supply performance by employing statistical monitoring. Journal of American Science, 6 (4). pp. 114-122. ISSN 1545-1003; ESSN: 2375-7264

Che Lah, Nur Azida and Ali, Aidy and Ismail, Napsiah and Lim, Poon Chai and Mohamed, Abdul Aziz (2010) The effect of controlled shot peening on fusion welded joints. Materials and Design, 31 (1). pp. 312-324. ISSN 0264-1275

Noroziroshan, Alireza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah (2010) Application of intelligence based genetic algorithm for job sequencing problem on parallel mixed-model assembly line. American Journal of Engineering and Applied Sciences, 3 (1). pp. 15-24. ISSN 1941-7020; ESSN: 1941-7039

Hasan, Ali T. and Ismail, Napsiah and Hamouda, Abdel Magid Salem and Aris, Ishak and Marhaban, Mohammad Hamiruce and Al-Assadi, Hayder M. A. Ali (2010) Artificial neural network-based kinematics Jacobian solution for serial manipulator passing through singular configurations. Advances in Engineering Software, 41 (2). pp. 359-367. ISSN 0965-9978

Razali, Mohd Hudzari and Wan Ismail, Wan Ishak and Sulaiman, Md. Nasir and Ismail, Napsiah and Mohamed Shariff, Abdul Rashid (2010) Computer simulation technique for two degree of freedom agriculture robot arm. International Journal of Computational Intelligence Techniques, 1 (2). pp. 15-17. ISSN 0976-0466; ESSN: 0976-0474

Mustapha, Faizal and Ismail, Napsiah and Salit, Mohd Sapuan and Noh, Z. and Samsuri, Abd Wahid (2010) Development of a prototype knowledge based system for troubleshooting of aircraft engine and parts- A case study of Cessna Caravan. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 36-42. ISSN 1823-0334

Arep @ Ariff, Hambali and Salit, Mohd Sapuan and Ismail, Napsiah and Yusoff, Nukman (2010) Material selection of polymeric composite automotive bumper beam using analytical hierarchy process. Journal of Central South University of Technology, 17 (2). pp. 244-256. ISSN 1005-9784

Mohamed Yusoff, Mohd Zuhri and Salit, Mohd Sapuan and Ismail, Napsiah and Wirawan, Riza (2010) Mechanical Properties of Short Random Oil Palm Fibre Reinforced Epoxy Composites. Sains Malaysiana, 39 (1). pp. 87-92. ISSN 0126-6039

Khabbazi, Mahmood Reza and Ismail, Md. Yusof and Ismail, Napsiah and Mousavi, Sayed Alireza (2010) Modeling of Traceability Information System for Material Flow Control Data. Australian Journal of Basic and Applied Sciences, 4 (2). pp. 208-216. ISSN 1991-8178

Motlagh, Omid Reza Esmaeili and Ramli, Abdul Rahman and Tang, Sai Hong and Motlagh, Farid Esmaeili and Ismail, Napsiah (2010) Motion modelling using concepts of fuzzy artificial potential fields. International Journal of Automotive and Mechanical Engineering, 2. pp. 171-180. ISSN 2229-8649; ESSN: 2180-1606

Suhail, Adeel H. and Ismail, Napsiah and Wong, Shaw Voon and Abdul Jalil, Nawal Aswan (2010) Optimization of cutting parameters based on surface roughness and assistance of workpiece surface temperature in turning process. American Journal of Engineering and Applied Sciences, 3 (1). pp. 102-108. ISSN 1941-7020; ESSN: 1941-7039

Darestani, Soroush Avakh and Ismail, Md. Yusof and Ismail, Napsiah and Mohd. Yusuff, Rosnah (2010) Quantifying suppliers' product quality: an exploratory product audit method. South African Journal of Industrial Engineering, 21 (2). pp. 149-159. ISSN 1012-277X; ESSN: 2224-7890

Darestani, Soroush Avakh and Ismail, Md. Yusof and Ismail, Napsiah and Mohd Yusuff, Rosnah (2010) An investigation on supplier delivery performance by using SPC techniques for automotive industry. Journal of American Science, 6 (4). pp. 5-11. ISSN 1545-1003; ESSN: 2375-7264

Mohd Ariffin, Mohd Khairol Anuar and Mohd Ali, M. I. and Salit, Mohd Sapuan and Ismail, Napsiah (2009) An optimise drilling process for an aircraft composite structure using design of experiments. Scientific Research and Essays, 4 (10). art. no. E509DE018608. pp. 1109-1116. ISSN 1992-2248

Che Lah, Nur Azida and Ali, Aidy and Ismail, Napsiah (2009) Characterization of fusion welded joint: a review. Pertanika Journal of Science & Technology, 17 (2). pp. 201-210. ISSN 0128-7680; ESSN: 2231-8526

Motlagh, Omid Reza Esmaeili and Tang, Sai Hong and Ismail, Napsiah (2009) Development of a new minimum avoidance system for a behavior-based mobile robot. Fuzzy Sets and Systems, 160 (13). pp. 1929-1946. ISSN 0165-0114; ESSN: 1872-6801

Hambali, Ariff and Salit, Mohd Sapuan and Ismail, Napsiah and Yusoff, Nukman and Abdul Karim, M. S. (2009) The important role of concurrent engineering in product development process. Pertanika Journal of Science & Technology, 17 (1). pp. 9-20. ISSN 0128-7680; ESSN: 2231-8526

Arep @ Ariff, Hambali and Salit, Mohd Sapuan and Ismail, Napsiah and Yusoff, Nukman (2009) Composite manufacturing process selection using analytical hierarchy process. International Journal of Mechanical and Materials Engineering, 4 (1). pp. 49-61. ISSN 1823-0334

Homayouni, Seyed Mahdi and Tang, Sai Hong and Ismail, Napsiah (2009) Development of genetic fuzzy logic controllers for complex production systems. Computers & Industrial Engineering, 57 (4). pp. 1247-1257. ISSN 0360-8352; ESSN: 1879-0550

Mohamed Rasin, Mohamad Zaihirain and Ismail, Napsiah and Salit, Mohd Sapuan and Wong, Shaw Voon (2009) Quick cost estimation model for early order stage. Journal of Advanced Manufacturing Technology, 3 (1). pp. 45-72. ISSN 1985-3157; ESSN: 2289-8107

Mohd Yusoff, Mohd Zuhri and Salit, Mohd Sapuan and Ismail, Napsiah (2009) Tensile properties of single oil palm empty fruit bunch (OPEFB) fibre. Sains Malaysiana, 38 (4). pp. 525-529. ISSN 0026-6039

Hasan, Ali T. and Hamouda, Abdel Magid Salem and Ismail, Napsiah and Aris, Ishak and Marhaban, Mohammad Hamiruce (2009) Trajectory tracking for a serial robot manipulator passing through singular configurations based on the adaptive kinematics Jacobian method. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 223 (3). 393 - 415.

Motlagh, Omid and Tang, Sai Hong and Ismail, Napsiah and Ramli, Abdul Rahman and Samin, Razali (2009) A new path estimation strategy for predicting blind persons' motion in indoor environments. Journal of Asian Architecture and Building Engineering, 8 (2). pp. 371-377. ISSN 1346-7581; ESSN: 1347-2852

Motlagh, Omid Reza Esmaeili and Tang, Sai Hong and Ismail, Napsiah and Ramli, Abdul Rahman (2009) A review on positioning techniques and technologies: a novel AI approach. Journal of Applied Sciences, 9 (9). pp. 1601-1614. ISSN 1812-5654; ESSN: 1812-5662

Karuppiah, Karmegam and Ismail, Md. Yusof and Salit, Mohd Sapuan and Ismail, Napsiah and Mohd Tamrin, Shamsul Bahri and Shuib, S. and Seetha, P. (2009) A study on motorcyclist's riding discomfort in Malaysia. Engineering e-Transaction, 4 (1). pp. 39-46. ISSN 1823-6379

Ismail, Napsiah and Musharavati, Farayi and Hamouda, Abdel Magid Salem and Ramli, Abdul Rahman (2008) Manufacturing process planning optimisation in reconfigurable multiple parts flow lines. Journal of Achievements in Materials and Manufacturing Engineering, 31 (2). pp. 671-677. ISSN 1734-8412

Abdul Aziz, Faieza and Pham, Duc Truong and Sulaiman, Shamsuddin and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2008) Visual feedback and pseudo–haptic feedback improve manual lifting performance. Jurnal Teknologi, 49 (D). pp. 157-171. ISSN 0127–9696; ESSN; 2180–3722

Karuppiah, Karmegam and Ismail, Md. Yusof and Mohd. Sapuan, Salit and Ismail, Napsiah (2008) Conceptual design and prototype of an ergonomic back-leaning posture support for motorbike riders. Journal of Scientific and Industrial Research, 67. pp. 599-604. ISSN 0022-4456; ESSN: 0975-1084

Esmaeilian, Gholamreza and Sulaiman, Shamsuddin and Ismail, Napsiah and Megat Ahmad, Megat Mohammad Hamdan and Hamedi, Maryam (2008) Application of MATLAB to create initial solution for Tabu Search in parallel assembly lines balancing. International Journal of Computer Science and Network Security, 8 (10). pp. 132-136. ISSN 1738-7906

Vasili, M. R. and Tang, Sai Hong and Ismail, Napsiah and Sulaiman, Shamsuddin (2008) Class-based storage assignments for miniload AS/RS with open-rack structure. International Journal of Engineering and Technology, 5 (2). pp. 118-128. ISSN 1823-1039

Arshad, Haslina and Hamouda, Abdel Magid Salem and Ismail, Napsiah and Sulaiman, Riza (2008) Virtual reality as a training tool in engineering education. World Review of Science, Technology and Sustainable Development, 5 (3/4). pp. 389-401. ISSN 1741-2242; ESSN: 1741-2234

Musharavati, Farayi and Ismail, Napsiah and S. Hamouda, Abdel Magid Salem and Ramli, Abdul Rahman (2008) A metaheuristic approach to manufacturing process planning in reconfigurable manufacturing systems. Jurnal Teknologi, 48 (A). pp. 55-70. ISSN 0127–9696; ESSN: 2180–3722

Motlagh, O. and Tang, Sai Hong and Ismail, Napsiah and Ramli, Abdul Rahman and Samin, Razali (2008) A novel approach to human motion estimation with applications in human-robot safety. International Journal of Engineering and Technology, 5 (2). pp. 129-137. ISSN 1823-1039

Vasili, Mohammadreza and Tang, Sai Hong and Homayouni, Seyed Mahdi and Ismail, Napsiah (2008) A statistical model for expected cycle time of SP-AS/RS: an application of Monte Carlo simulation. Applied Artificial Intelligence, 22 (7-8). pp. 824-840. ISSN 0883-9514; ESSN: 1087-6545

Tang, Sai Hong and Tan, Y. J. and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Ismail, Napsiah and Samin, Razali (2007) The use of Taguchi method in the design of plastic injection mould for reducing warpage. Journal of Materials Processing Technology, 182 (1-3). pp. 418-426. ISSN 0924-0136; ESSN: 1873-4774

Bani Hashim, Ahmad Yusairi and Ismail, Napsiah and Megat Ahmad, Megat Mohamad Hamdan and Salem Hamouda, Abdel Magid and Osman, Mohd Rasid (2004) Application of Soft Computing to Serial Manipulator Kinematic Problems. Pertanika Journal of Science & Technology, 12 (2). pp. 191-200. ISSN 0128-7680

Wong, Choon Tat and Sulaiman, Shamsuddin and Ismail, Napsiah and Salem Hamouda, Abdel Magid (2004) Design and Simulation of Plastic Injection Moulding Process. Pertanika Journal of Science & Technology, 12 (2). pp. 85-99. ISSN 0128-7680

Tan, J. Y. and Wong, Shaw Voon and Ismail, Napsiah and Salem Hamouda, Abdel Magid (2004) General Strategies in Developing Alloy Steel Fuzzy Model for Machinability Data Selection of Turning Process. Pertanika Journal of Science & Technology, 12 (2). pp. 177-189. ISSN 0128-7680

Mustapha, Faizal and Salit, Mohd Sapuan and Ismail, Napsiah and Mokhtar, Ahmad Samsuri (2004) A computer-based intelligent system for fault diagnosis of an aircraft engine. Engineering Computations, 21 (1). pp. 78-90. ISSN 0264-4401

Salit, Mohd Sapuan and Devanesan Jacob, M. Suresh and Mustapha, Faizal and Ismail, Napsiah (2002) A prototype knowledge-based system for material selection of ceramic matrix composites of automotive engine components. Materials and Design, 23 (8). pp. 701-708. ISSN 0264-1275

Ismail, Napsiah and Abu Bakar, Nooh (1997) Recognition of Machined Features from Solid Database of Prismatic Components. Pertanika Journal of Science & Technology, 5 (2). pp. 231-240. ISSN 0128-7680

Molamohamadi, Zohreh and Arshizadeh, Rahman and Ismail, Napsiah (2014) Ordering policies of a deteriorating item in an EOQ model with backorder under two-level partial trade credit. In: International Conference on Mathematics, Engineering and Industrial Applications 2014 (ICoMEIA 2014), 28-30 May 2014, Penang, Malaysia. (pp. 1-13).

Ariafar, Shahram and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar and Say, Hong Tang and Firoozi, Zahra (2013) Illustration and model verification for an inter-cell and intra-cell facility layout problem in a cellular manufacturing system. In: International Conference on Information Technology and Management Innovation, ICITMI 2012, 10-11 Nov. 2012, Guangzhou; China. (pp. 1310-1314).

Firoozi, Zahra and Ismail, Napsiah and Ariafar, Shahram and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar (2013) A genetic algorithm for solving supply chain network design model. In: International Conference on Mathematical Sciences and Statistics 2013 (ICMSS2013), 5-7 Feb. 2013, Kuala Lumpur, Malaysia. (pp. 211-214).

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2012) Experimental investigation on surface roughness and tool wear in dry machining of TiC reinforced aluminium LM6 composite. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2012) Surface quality and chip formation in turning of LM6 aluminium alloy and particulate reinforced metal matrix composite. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Ahmad, M. Syahrir and Baharudin, B. T. Hang Tuah and Leman, Zulkiflle and Ismail, Napsiah and Sulaiman, Shamsuddin (2012) Thermal parameter affects on the part built using 3D printer Projet SD 3000. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Ariafar, Shahram and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Firoozi, Zahra (2011) Inter-cell and intra-cell layout design in a cellular manufacturing system. In: 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2011), 25-28 Sept. 2011, Bayview Hotel, Langkawi, Kedah. (pp. 28-33).

Ismail, Napsiah and Nehzati, Taravatsadat and Rashidi-Bajgan, Hannaneh (2010) Fuzziness in analytic network process under interval numbers for criteria and alternatives. In: 2010 International Conference on Computer Applications and Industrial Electronics (ICCAIE 2010), 5-7 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 222-226).

Motlagh, Omid Reza Esmaeili and Tang, Sai Hong and Ramli, Abdul Rahman and Ismail, Napsiah (2010) A computerized approach to group discussion and decision making. In: 18th International Conference on Computers in Education (ICCE 2010), 29 Nov.-3 Dec. 2010, Putrajaya, Malaysia. (pp. 214-216).

Rashidi-Bajgan, Hannaneh and Rezaeian, Javad and Nehzati, Taravatsadat and Ismail, Napsiah (2010) A genetic algorithm for capital budgeting problem with fuzzy parameters. In: 2010 International Conference on Computer Applications and Industrial Electronics (ICCAIE 2010), 5-7 Dec. 2010, Kuala Lumpur, Malaysia. (pp. 233-238).

Motlagh, Omid Reza Esmaeili and Tang, Sai Hong and Ramli, Abdul Rahman and Ismail, Napsiah and Nakhaeinia, Danial (2010) A novel approach to motion modeling using fuzzy cognitive map and artificial potential fields. In: 11th International Conference on Control, Automation, Robotics and Vision (ICARCV 2010), 7-10 Dec. 2010, Singapore. (pp. 1963-1967).

Vasili, Mohammadreza and Tang, Sai Hong and Ismail, Napsiah and Sulaiman, Shamsuddin and Wong, Shaw Voon and Vasili, Mehdi (2009) Bead-sort algorithm for load shuffling in miniload AS/RS with an open-rack structure. In: 39th International Conference on Computers & Industrial Engineering (CIE39), 6-8 July 2009, University of Technology of Troyes, France. (pp. 1781-1786).

Arep @ Ariff, Hambali and Salit, Mohd Sapuan and Ismail, Napsiah and Yusoff, Nukman (2009) Evaluation of natural fibre composites using analytical hierarchy process. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 90-95).

Ng, Sok Choo and Mohd Yusof, Juraina and Mohd Kassim, Muhamad Saufi and Abdul Rahman, Khairuddin and Ismail, Napsiah (2009) IV-FMC: an automated vision based part modeling and reconstruction system for flexible manufacturing cells. In: 2008 IEEE International Conference on Robotics and Biomimetics (ROBIO 2008), 21-26 Feb. 2009, Bangkok, Thailand. (pp. 1383-1387).

Arep @ Ariff, Hambali and Salit, Mohd Sapuan and Ismail, Napsiah and Yusoff, Nukman (2009) Selection of materials using analytical hierarchy process and Pugh's selection method. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 96-103).

Homayouni, Seyed Mahdi and Tang, Sai Hong and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar and Samin, Razali (2009) A hybrid genetic-heuristic algorithm for scheduling of automated guided vehicles and quay cranes in automated container terminals. In: 39th International Conference on Computers & Industrial Engineering (CIE39), 6-8 July 2009, University of Technology of Troyes, France. (pp. 96-101).

Mohamed Yusoff, Mohd Zuhri and Salit, Mohd Sapuan and Ismail, Napsiah (2009) An overview of oil palm fibre - polymer composites. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 69-77).

Vasili, Mohammadreza and Tang, Sai Hong and Ismail, Napsiah and Sulaiman, Shamsuddin (2008) Open-rack structure for miniload automated storage and retrieval system:an innovative design approach. In: The 12th World Multi-Conference on Systemics, Cybernetics and Informatics, 29 Jun-2 Julai 2008, Orlando,Florida, USA. (pp. 281-286).

Esmaeilian, Gholamreza and Megat Ahmad, Megat Mohamad Hamdan and Ismail, Napsiah and Sulaiman, Shamsuddin and Hamedi, Maryam (2008) Particular model for improving failure mode and effect analysis (FMEA) by using of overall equipment efficiency (OEE). In: 3rd International Symposium on Information Technology (ITSim'08), 26-28 Aug. 2008, Kuala Lumpur, Malaysia. .

Vasili, Mohammad Reza and Homayouni, S. Mahdi and Tang, Sai Hong and Ismail, Napsiah (2006) Comparison of different dwell point policies for SP-AS/RS. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 288-301).

Kanisin, Devaraj and Tang, Sai Hong and Ismail, Napsiah (2006) Designing subsea coaxial channel model as FIR filter on MATLAB. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 334-341).

Esfandyari , Alireza and Osman, Mohd Rasid and Ismail, Napsiah and Megat Ahmad, Megat Mohamad Hamdan (2006) Value stream mapping: a tool to design the future state map aligned with lean manufacturing principles. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 342-350).

Mohamed Addin, Addin Osman and Salit, Mohd Sapuan and Ebrahimi, Mahdi and Othman, Mohamed and Ismail, Napsiah (2005) Bayesian network approach to classify damages and f -folds feature subset selection method in laminated composite materials. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Abd Manaf, Ismanizam and Ismail, Napsiah and Hamouda, Abdel Magid Salem and Wong, Shaw Voon (2005) Complex parts surface modelling from laser scanning data. In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Kanisin, Devaraj and Shokouhi, Mohammad and Wong, Wai Pun and Singh, Manveer and Siau, Wing Ket and Tang, Sai Hong and Ismail, Napsiah (2005) Development of active & passive airborne remote sensors. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Aqel, Mohammad O. A. and Ismail, Napsiah (2005) Development of programmable logic controllers training kit. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Azizi, Amir and Ismail, Napsiah (2005) Investigating on the supply chain management. In: International Advanced Technology Congress: Conference on Spatial and Computational Engineering, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Saaid, S. S. and Ismail, Napsiah and Wong, Shaw Voon and Sulaiman, Shamsuddin and Osman, Mohd. Rasid (2005) Pattern matching technique from B-rep model. In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Ismail, Ahmad Rasdan and Makhtar, Nor Kamilah and Hassan, Azmi and Ismail, Napsiah (2005) Simulation and sequential operation analysis of a robotic cell. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Mohammad, Musli and Osman, Mohd Rasid and Mohd Yusuff, Rosnah and Ismail, Napsiah (2005) Strategies and critical success factors for integrated management systems implementation. In: 35th International Conference on Computers and Industrial Engineering, 19-22 June 2005, Istanbul, Turkey. (pp. 1391-1396).

Razali, Mohd. Hudzari and Wan Ismail, Wan Ishak and Ismail, Napsiah and Sulaiman, Md. Nasir and Shariff, Rashid (2005) Videogrammetry technique for arm positioning of bio-production robot. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Ismail, Napsiah and Abdul Rahman, Khairuddin and Md Yusof, Juraina and Mohd Kassim, Muhammad Saufi and Tang, Sai Hong and Samin, Razali (2005) Vision-based 3D part recognition system for flexible manufacturing cell. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Musharavati, F. and Ismail, Napsiah and Hamouda, Abdel Magid Salem and Ramli, Abdul Rahman (2005) An analytical hierarchical process approach for evaluating configuration performance in reconfigurable manufacturing systems. In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6 - 8 Dec. 2005, Putrajaya, Malaysia. .

Musharavati, Farayi and Ismail, Napsiah and Hamouda, Abdel Magid Salem and Ramli, Abd. Rahman (2005) A neural network based control strategy for reconfigurable manufacturing systems. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Ishak, Asnor Juraiza and Aris, Ishak and Lim, Denny and Iqbal, A. K. M. Parvez and Mohd Noor, Samsul Bahari and Ismail, Napsiah and Kamal Bashah, Nagur Aziz (2003) Design of entertainment mobile robot: IDAP. In: Student Conference on Research and Development (SCORED 2003), 25-26 Aug. 2003, Putrajaya, Malaysia. (pp. 298-303).

Mousavi, Maryam and Abdul Aziz, Faieza and Ismail, Napsiah Investigation of 3D modelling and virtual reality systems in Malaysian automotive industry. In: International Conference on Frontiers of Mechanical Engineering Materials and Energy, 20-21 Dec. 2012, Beijing, China. .

B. T. Hang Tuah Baharudin (2013) Portable constant load tensile-corrosion test system. PI2013701936.

Karmegam Karuppiah (2013) Ergonomic lumbar support. PI2013701235.

Mohd Sapuan Salit (2012) Lumbar support system. PI2012700031.

Desa Ahmad (2011) A pneumatic seeding machine. PI2011000816.

Mohd Sapuan Salit (2009) Wind power station. UNSPECIFIED.

Mohd Sapuan Salit (2009) Turn bridge. UNSPECIFIED.

Mohd Sapuan Salit (2005) Apparatus for machining spiral tooth of a spiral bevel gear. UNSPECIFIED.

Megat Mohamad Hamdan Megat Ahmad (2004) Valve arrangement of internal combustion engine. UNSPECIFIED.