Browse by Subject

Ab Razak, Mohd Shahrizal and Masri, Amirah Afiqah and Mohamad, Noor Asiah and Rosdi, Nor Syamimi and Khan, Abdul Rehman (2025) Evaluation of mean wave overtopping and maximum individual wave overtopping on rock revetment. Jurnal Teknologi, 87 (2). pp. 329-340. ISSN 0127-9696; eISSN: 2180-3722

Ahmad Kamaroddin, Mohd Fadhzir and Sabli, Nordin and Tuan Abdullah, Tuan Amran and Abdullah, Luqman Chuah and Izhar, Shamsul and Hassan, Nurul Sahida and Abdul Jalil, Aishah (2025) Analysis of novel PBI/ZrP hybrid membrane-based CuCl-HCl electrolytic system on the performance of hydrogen production by FFD and RSM. Journal of Applied Science and Engineering, 29 (5). pp. 1153-1164. ISSN 2708-9967; eISSN: 2708-9975

Ali, Muhammad Moazzam and Hashim, Shaiful Jahari and Chaudhary, Muhammad Akmal and Ferré, Guillaume and Rokhani, Fakhrul Zaman and Ahmad, Zaid (2025) Augmenting agricultural IoT networks: implementing Reed-Solomon codes for Rotating Polarization Waves over LPWAN in Rician fading environments. Results in Engineering, 28. art. no. 107406. pp. 1-12. ISSN 2590-1230

Ansari, Ali Murtaza and Solangi, Faheem Ahmed and Sanjrani, Ali Nawaz and Hussain, Fayaz and Zhang, Bo and Ding, Zhou and Mat Nawi, Nazmi Mat (2026) Enhancing engine reliability with machine learning techniques on spark plug deposition using green alcohol blend fuels on gasoline engine. Results in Engineering, 29. art. no. 108975. pp. 1-23. ISSN 2590-1230

Dzulkafli, Mohd Firdaus and Hairuddin, Abdul Aziz and Mossa, Muntasser A.A. (2025) The impact of intake temperature on air assisted fuel injection HCCI engine. Jurnal Teknologi, 88 (1). pp. 33-40. ISSN 0127-9696; eISSN: 2180-3722

Ginting, A. and Kasim, M. S. and Baharudin, B. T. Hang Tuah (2025) Machine learning-based surface roughness prediction in turning of hardened AISI 4340 steels: incorporating tool wear via cutting length. Journal of Applied Science and Engineering, 29 (1). pp. 23-31. ISSN 2708-9967; eISSN: 2708-9975

Hussain, Syed M. and Ahmad, Hijaz and Karim, Maimoona and Fadhl, Bandar M. and Jamshed, Wasim and Mohamed Isa, Siti Suzilliana Putri and Qureshi, Muhammad Amer and Khan, Abbas (2025) Numerical simulation of thermal radiation transmission in casson fluid flow with surface heat and mass fluxes. Results in Engineering, 28. art. no. 108164. pp. 1-16. ISSN 2590-1230

Ismail, Nurhazwani and Zainal Abidin, Zurina and Talip, Farah Saleena and Muhammad Fairuz, Nur Aqilah and Ahmed Hassan, Mohamednageib and Yunus, Robiah (2025) Spray dried powder biocoagulant from Jatropha curcas liquid extract and its preliminary assessment in turbidity removal. Journal of Applied Science and Engineering, 29 (4). pp. 749-764. ISSN 2708-9967; eISSN: 2708-9975

Katbar, Nek Muhammad and Zahir, Hina and Guedri, Kamel and Makhdoum, Basim M. and Mohamed Isa, Siti Suzilliana Putri and Hussain, Syed M. and Khan, Abbas (2025) Deep learning-based thermal modeling of slipping velocity in oblique magnetohydrodynamic non-Newtonian nanofluid flows. Results in Engineering, 27. art. no. 106598. pp. 1-12. ISSN 2590-1230

Khalid, Haqi and Hashim, Shaiful Jahari and Abdulsaheb, Jaafar Ahmed (2025) KAYANGAN: lightweight authentication and key agreement scheme using HPKE for 6G Non-Terrestrial Networks. Ain Shams Engineering Journal, 17 (1). art. no. 103839. pp. 1-14. ISSN 2090-4479

Liu, Yu and Ding, Yang and Khalid, Fatimah and Wang, Cunrui and Wang, Lei (2025) Few-shot font generation via denoising diffusion and component-level fine-grained style. Expert Systems with Applications, 296. art. no. 128987. pp. 1-16. ISSN 0957-4174 (In Press)

M. S., N. Atikah and Harun, Razif and Ilyas, R. A. and Norrrahim, Mohd Nor Faiz and Knight, Victor Feizal (2025) Algae cultivation systems integrated with photovoltaic cell: a systematic review. Results in Engineering, 27. art. no. 106294. pp. 1-13. ISSN 2590-1230

Maalla, Allam and Wang, Ruping and Zhang, Yuting (2025) Towards sustainable city transport fleet mobility: robust energy scheduling for urban energy ecosystem coupled with autonomous electric taxis. Expert Systems with Applications, 304. art. no. 130782. pp. 1-23. ISSN 0957-4174

Md Saleh, Nur Izzati and Wan Ab Karim Ghani, Wan Azlina and Mustapa Kamal, Siti Mazlina and Alias, Azil Bahari and Harun, Mohd Razif (2026) Membrane fouling and flux reduction of Nannochloropsis sp protein hydrolysate using cross-flow ultrafiltration membrane. Jurnal Kejuruteraan, 38 (1). pp. 399-411. ISSN 0128-0198; eISSN: 2289-7526

Rahmawaty and Rauf, Abdul and Nugroho, Sigit Budi and Isdhiartanto, Era and Sitakar, Binti Ma’niyah and Barus, Sriyanti Puspita and Harahap, Fitra Syawal and Salleh, Siti Aekbal and Ismail, Mohd Hasmadi (2026) Enhancing Percut Watershed sustainability in North Sumatra: the role of monitoring and evaluation. Jurnal Kejuruteraan, 38 (1). pp. 101-113. ISSN 0128-0198; eISSN: 2289-7526

Zheng, Alvin Lim Teik and Teo, Ellie Yi Lih and Marzuki, Omar Faruqi and Koo, Lee Feng and Wong, Tze Jin and Chung, Eric Lim Teik and Andou, Yoshito (2025) Additive manufacturing of high-performance adsorbents for environmental use. Engineering Research Express, 7 (3). art. no. 032001. pp. 1-24. ISSN 2631-8695