Browse by Journal Title

Amir Hamzah, Amir Syahir (2018) Multilayer-tuned surface plasmon modes using molecular nanolayer of (3-mercaptopropyl)trimethoxysilane applicable for nanobiosensing application. Materials and Design, 155. 99 - 105. ISSN 0261-3069, ESSN: 0264-1275

Abu Bakar, Nurfatimah and Ching, Yern Chee and Abdullah, Luqman Chuah and Ratnam, Chantara Thevy and Ibrahim, Nor Azowa (2015) Thermal and dynamic mechanical properties of grafted kenaf filled poly (vinyl chloride)/ethylene vinyl acetate composites. Materials and Design, 65. pp. 204-211. ISSN 0264-1275; ESSN: 1873-4197

Misri, Sairizal and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan (2015) Torsional behaviour of filament wound kenaf yarn fibre reinforced unsaturated polyester composite hollow shafts. Materials and Design, 65. pp. 953-960. ISSN 0264-1275; ESSN: 1873-4197

Zakikhani, Parnia and Zahari, Rizal and Hameed Sultan, Mohamed Thariq and Abang Abdul Majid, Dayang Laila (2014) Extraction and preparation of bamboo fibre-reinforced composites. Materials and Design, 63. pp. 820-828. ISSN 0264-1275; ESSN: 1873-4197

Yahaya, Ridwan and Salit, Mohd Sapuan and Jawaid, Mohammad and Leman, Zulkiflle and Zainudin, Edi Syams (2014) Quasi-static penetration and ballistic properties of kenaf-aramid hybrid composites. Materials and Design, 63. pp. 775-782. ISSN 0264-1275; ESSN: 1873-4197

Alkbir, M. F. M. and Salit, Mohd Sapuan and Abdul Aziz, Nuraini and Ishak, Mohamad Ridzwan (2014) Effect of geometry on crashworthiness parameters of natural kenaf fibre reinforced composite hexagonal tubes. Materials and Design, 60. pp. 85-93. ISSN 0264-1275; ESSN: 1873-4197

Rahmanian, Saeed and Abdul Rashid, Suraya and Shazed, M. A. and Zahari, Rizal and Zainudin, Edi Syams (2014) Mechanical characterization of epoxy composite with multiscale reinforcements: carbon nanotubes and short carbon fibers. Materials and Design, 60. pp. 34-40. ISSN 0264-1275; ESSN: 1873-4197

Manshor, M. R. and Anuar, Hazleen and Mohd Nasir, Nur Aimi and Mohd Ithnin, Ahmad Fitrie and Wan Busu, Wan Nazri and Salit, Mohd Sapuan and El-Shekeil, Yousuf Ali Gumaan and Wahit, Mat Uzir (2014) Mechanical, thermal and morphological properties of durian skin fibre reinforced PLA biocomposites. Materials and Design, 59. pp. 279-286. ISSN 0264-1275; ESSN: 1873-4197

Salit, Mohd Sapuan and Mansor, Muhd Ridzuan (2014) Concurrent engineering approach in the development of composite products: a review. Materials and Design, 58. pp. 161-167. ISSN 0264-1275; ISSN: 1873-4197

Md Deros, Mohd Azaman and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Zainudin, Edi Syams and Abdan, Khalina (2014) Numerical simulation analysis of the in-cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-walled parts formed by the injection moulding process. Materials and Design, 55. pp. 381-386. ISSN 0264-1275; ESSN: 1873-4197

Bahraminasab, Marjan and Sahari, Barkawi and Edwards, Kevin L. and Farahmand, Farzam and Jahan, Ali and Tang, Sai Hong and Arumugam, Manohar (2014) On the influence of shape and material used for the femoral component pegs in knee prostheses for reducing the problem of aseptic loosening. Materials and Design, 55 . pp. 416-428. ISSN 0264-1275; ESSN: 1873-4197

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdul Aziz, Nuraini and Arep @ Ariff, Hambali (2014) Conceptual design of kenaf fiber polymer composite automotive parking brake lever using integrated TRIZ-Morphological Chart-Analytic Hierarchy Process method. Materials and Design, 54. pp. 473-482. ISSN 0261-3069; ESSN: 1873-4197

Shukor, Faseha and Hassan, Azman and Islam, Md. Saiful and Mokhtar, Munirah and Hasan, Mahbub (2014) Effect of ammonium polyphosphate on flame retardancy, thermal stability and mechanical properties of alkali treated kenaf fiber filled PLA biocomposites. Materials and Design, 54. pp. 425-429. ISSN 0261-3069; ESSN: 1873-4197

Mohammad, Mazian and Abdullah, Shahrum and Jamaludin, Nordin and Inayatullah, Othman (2014) Predicting the fatigue life of the SAE 1045 steel using an empirical Weibull-based model associated to acoustic emission parameters. Materials and Design, 54. pp. 1039-1048. ISSN 0264-1275; ESSN: 1873-4197

Bahraminasab, Marjan and Sahari, Barkawi and Edwards, Kevin L. and Farahmand, Farzam and Tang, Sai Hong and Arumugam, Manohar and Jahan, Ali (2014) Multi-objective design optimization of functionally graded material for the femoral component of a total knee replacement. Materials and Design, 53 . pp. 159-173. ISSN 0264-1275; ESSN: 1873-4197

Szymona, Karolina and Borysiuk, Piotr and H'ng, Paik San and Chin, Kit Ling and Maminski, Mariusz (2014) Valorization of waste oil palm (Elaeis guineensis Jacq.) biomass through furfurylation. Materials and Design, 53. pp. 425-429. ISSN 0264-1275; ESSN: 1873-4197

Abral, Hairul and Kadriadi, D. and Rodianus, A. and Mastariyanto, P. and Ilhamdi, and Arief, Syukri and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan (2014) Mechanical properties of water hyacinth fibers – polyester composites before and after immersion in water. Materials and Design, 58. pp. 125-129. ISSN 0264-1275; ESSN: 1873-4197

Yeoh, Beng Hoong and Loh, Yueh Feng and Abdullah, Luqman Chuah and Idrus, Juliwar and Pizzi, Antonio and Md. Tahir, Paridah and Jalaluddin, Harun (2013) Development a new method for pilot scale production of high grade oil palm plywood: effect of resin content on the mechanical properties, bonding quality and formaldehyde emission of palm plywood. Materials and Design, 52. pp. 828-834. ISSN 0264-1275; ESSN: 1873-4197

Abdul Rashid, Suraya and Mohd Salleh, Mohamad Amran and Mohd Yusoff, Hamdan and Rahmanian, Saeed and Thean, K. S. and Md. Aziz, Shazed (2013) Carbon and glass hierarchical fibers : influence of carbon nanotubes on tensile, flexural and impact properties of short fiber reinforced composites. Materials and Design, 43. pp. 10-16. ISSN 0261-3069

Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdul Aziz, Nuraini and Mansor, Muhd Ridzuan and Arep @ Ariff, Hambali (2013) Hybrid natural and glass fibers reinforced polymer composites material selection using Analytical Hierarchy Process for automotive brake lever design. Materials and Design, 51. pp. 484-492. ISSN 0261-3069

Salit, Mohd Sapuan and Zainudin, Edi Syams and Japar, Sahari and Maleque, Md Abdul (2013) Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree. Materials and Design, 49. pp. 285-289. ISSN 0264-1275; ESSN: 1873-4197

Salit, Mohd Sapuan and Pua, Fei Ling and El-Shekeil, Yousuf Ali Gumaan and Al-Oqla, Faris M. (2013) Mechanical properties of soil buried kenaf fibre reinforced thermoplastic polyurethane composites. Materials and Design, 50. pp. 467-470. ISSN 0264-1275; ESSN: 1873-4197

Majeed, Khaliq and Jawaid, Mohammad and Hassan, Azman and Abu Bakar, Aznizam and Abdul Khalil, H. P. S. and Salema, Arshad Adam and Inuwa, Ibrahim Mohammed (2013) Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites. Materials and Design, 46. pp. 391-410. ISSN 0264-1275; ESSN: 1873-4197

Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdan, Khalina and Sulaiman, Shamsuddin and Md Deros, Mohd Azaman (2013) An investigation of the processability of natural fibre reinforced polymercomposites on shallow and flat thin-walled parts by injection moulding process. Materials and Design, 50 (September). pp. 451-456. ISSN 0261-3069

Yeoh, Beng Hoong and Yueh, Feng Loh and Abd. Wahab, Nor Hafizah and Md. Tahir, Paridah and Harun, Jalaluddin (2012) Development of a new pilot scale production of high grade oil palm plywood: Effect of pressing pressure. Materials and Design, 36 (-). pp. 215-219. ISSN 0264-1275

Salit, Mohd Sapuan and Ali, Aidy and Makinejad, Majid Davoodi and Abu Osman, Noor Azuan and Oshkour, Azim Ataollahi and Wan Abas, Wan Abu Bakar (2012) Development process of new bumper beam for passenger car: a review. Materials and Design, 40. pp. 304-313. ISSN 0261-3069

Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdan, Khalina and El-Shekeil, Yousuf Ali (2012) Influence of fiber content on the mechanical and thermal properties of kenaf fiber reinforced thermoplastic polyurethane composites. Materials and Design, 40. pp. 299-303. ISSN 0261-3069

Mohamed Ariff, Azmah Hanim and Chang, S. Chuan and Chuan, O. Khang (2011) Effect of a two-step solution heat treatment on the microstructure and mechanical properties of 332 aluminium silicon cast alloy. Materials and Design, 32 (4). pp. 2334-2338. ISSN 0264-1275; ESSN: 1873-4197

Jahan, Ali and Mustapha, Faizal and Ismail, Mohd Yusuf and Salit, Mohd Sapuan and Bahraminasab, Marjan (2011) A comprehensive VIKOR method for material selection. Materials and Design, 32 (3). pp. 1215-1221. ISSN 0261-3069

Abdul Samad, Mohd Syazwan and Ali, Aidy and Sidhu, Rajdave Singh (2011) Durability of automotive jounce bumper. Materials and Design, 32 (2). pp. 1001-1005. ISSN 0261-3069

Yueh, Feng Loh and Md. Tahir, Paridah and Yeoh, Beng Hoong and Choo, Adrian Cheng Yong (2011) Effects of treatment with low molecular weight phenol formaldehyde resin on the surface characteristics of oil palm (Elaeis quineensis) stem veneer. Materials and Design, 32 (4). pp. 2277-2283. ISSN 0264-1275

Bernard, Martin and Abdan, Khalina and Ali, Aidy and Janius, Rimfield and Faizal, Muhammad and K. S., Hasanah and Sanuddin, Asmawi (2011) The effect of processing parameters on the mechanical properties of kenaf fibre plastic composite. Materials and Design, 32 (2). pp. 1039-1043. ISSN 0264-1275; ESSN: 1873-4197

M. M., Shahzamanian and Sahari, Barkawi and Bayat, Mehdi and Zahari, Nur Ismarrubie and Mustapha, Faizal (2010) Transient and thermal contact analysis for the elastic behavior of functionally graded brake disks due to mechanical and thermal loads. Materials and Design, 31 (10). pp. 4655-4665. ISSN 0264-1275

Jahan, Ali and Ismail, Md. Yusof and Salit, Mohd Sapuan and Mustapha, Faizal (2010) Material screening and choosing methods – A review. Materials and Design, 31 (2). pp. 696-705. ISSN 0264-1275; ESSN: 1873-4197

Abu Talib, Abdul Rahim and Ali, Aidy and Badie, Mohamed A. and Che Lah, Nur Azida and Golestaneh, Amirreza Fahim (2010) Developing a hybrid, carbon/glass fiber-reinforced, epoxy composite automotive drive shaft. Materials and Design, 31 (1). pp. 514-521. ISSN 0264-1275

Che Lah, Nur Azida and Ali, Aidy and Ismail, Napsiah and Lim, Poon Chai and Mohamed, Abdul Aziz (2010) The effect of controlled shot peening on fusion welded joints. Materials and Design, 31 (1). pp. 312-324. ISSN 0264-1275

Abu Talib, Abdul Rahim and Ali, Aidy and Hamdan, Gehad Goudah Soliman Mosleh and Che Lah, Nur Azida and Golestaneh, Amirreza Fahim (2010) Developing a composite based elliptic spring for automotive applications. Materials and Design, 31 (1). pp. 475-484. ISSN 0261-3069

Ali, Aidy and Sanuddin, Asmawi and Ezzeddin, Saifuliwan (2010) The effect of aging on Arenga pinnata fiber-reinforced epoxy composite. Materials and Design, 31 (7). pp. 3550-3554. ISSN 0261-3069; ESSN: 1873-4197

Golestaneh, Amirreza Fahim and Ali, Aidy and Mohammadi, Mehdi Zadeh (2009) Modelling the fatigue crack growth in friction stir welded joint of 2024-T351 Al alloy. Materials and Design, 30 (8). pp. 2928-2937. ISSN 0264-1275; ESSN: 1873-4197

Zainudin, Edi Syams and Salit, Mohd Sapuan and Abdan, Khalina and Tengku Muda Mohamed, Mahmud (2009) Thermal degradation of banana pseudo-stem filled unplasticized polyvinyl chloride (UPVC) composites. Materials and Design, 30 (3). pp. 557-562. ISSN 0261-3069; ESSN: 1873-4197

Sulaiman, O. and Salim, N. and Hashim, R. and M. Yusof, L. H. and Razak, W. and M. Yunus, N. Y. and W. S., Hashim and M., Azmy (2009) Evaluation on the suitability of some adhesives for laminated veneer lumber from oil palm trunks. Materials and Design, 30 (9). pp. 3572-3580. ISSN 0261-3069; ESSN: 1873-4197

Zainudin, Edi Syams and Salit, Mohd Sapuan and Abdan, Khalina and Tengku Muda Mohamed, Mahmud (2009) Thermal degradation of banana pseudo-stem filled unplasticized polyvinyl chloride (UPVC) composites. Materials and Design, 30 (3). 557 -562. ISSN 0261-3069

Abdul Kadir, Amiruddin and Salit, Mohd Sapuan and Jaafar, Abdul Aziz (2008) Analysis of glass fibre reinforced epoxy composite hovercraft hull base. Materials and Design, 29 (7). pp. 1453-1458. ISSN 0264-1275; ESSN: 1873-4197

Khalid, Marzuki and Ratnam, Chantara Thevy and Chuah, Teong Guan and Ali, Salmiaton and Choong, Thomas Shean Yaw (2008) Comparative study of polypropylene composites reinforced with oil palm empty fruit bunch fiber and oil palm derived cellulose. Materials and Design, 29 (1). pp. 173-178. ISSN 0264-1275; ESSN: 1873-4197

Rezaei, Fateme and Yunus, Robiah and Ibrahim, Nor Azowa (2008) Effect of fiber length on thermomechanical properties of short carbon fiber reinforced polypropylene composites. Materials and Design, 30 (2). pp. 260-263. ISSN 0264-1275; ESSN: 1873-4197

Leman, Zulkiflle and Salit, Mohd Sapuan and Aaisa, Mohamad Saifol and Md Abdul Maleque, and Megat Ahmad, Megat Mohamad Hamdan (2008) Moisture absorption bahaviour of sugar palm fibre reinforced epoxy composites. Materials and Design, 29 (8). pp. 1666-1670. ISSN 0261-3069; ESSN: 1873-4197

Min Min , A. and Chuah, T.G. and Ratnam, Chantara Thevy (2008) Thermal and dynamic mechanical analysis of polyethylene modified with crude palm oil. Materials and Design, 29 (5). pp. 992-999. ISSN 0261-3069

Bachtiar, Dandi and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan (2008) The effect of alkaline treatment on tensile properties of sugar palm fibre reinforced epoxy composites. Materials and Design, 29 (7). pp. 1285-1290. ISSN 0264-1275; ESSN: 1873-4197

Addin, O. and Salit, Mohd Sapuan and Mahdi Ahmad Saad, Elsadig and Othman, Mohamed (2007) A Naïve-Bayes classifier for damage detection in engineering materials. Materials and Design, 28 (8). pp. 2379-2386. ISSN 0264-1275

Md Rejab, Mohd Noor Arib and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Md. Tahir, Paridah and Mohd Dahlan, Khairul Zaman (2006) Mechanical properties of pineapple leaf fibre reinforced polypropylene composites. Materials and Design, 27 (5). pp. 391-396. ISSN 0264-1275; ESSN: 1873-4197

Salit, Mohd Sapuan and A., Leenie and Mohamed, Harimi and Yeo, Kay Beng (2006) Mechanical properties of woven banana fibre reinforced epoxy composites. Materials and Design, 27 (8). pp. 689-693. ISSN 0264-1275; ESSN: 1873-4197

Salit, Mohd Sapuan and Devanesan Jacob, M. Suresh and Mustapha, Faizal and Ismail, Napsiah (2002) A prototype knowledge-based system for material selection of ceramic matrix composites of automotive engine components. Materials and Design, 23 (8). pp. 701-708. ISSN 0264-1275

Salit, Mohd Sapuan (2001) A knowledge-based system for materials selection in mechanical engineering design. Materials and Design, 22 (8). pp. 687-695. ISSN 0264-1275; ESSN: 1873-4197