UPM Institutional Repository

Items where Division is "Faculty of Engineering" and Year is 2006

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | Y | Z
Number of items: 251.

A

A. K., Elwaleed and Yahya, Azmi and Bardaie, Mohd Zohadie and Ahmad, Desa and Abdelmotalab Fadlelmola, Kheiralla (2006) Net traction ratio prediction for high-lug agricultural tyre. Journal of Terramechanics, 43 (2). pp. 119-139. ISSN 0022-4898

AL-Hamati, Abdullah Ali Nassir and Ghazali, Abdul Halim and Mohammed Ali, Thamer Ahmed and Norzaie, Jamalodin and Abdul Kadir, Mohd. Razali (2006) New application of rigid polyvinyl chloride pipes in subsurface stormwater storage-infiltration system. In: Seminar on Engineering and Technology (SET2006) , 4 - 5 Sept. 2006, Putrajaya, Malaysia. (pp. 449-460).

Ab Kadir, Mohd Zainal Abidin and Cotton, Ian (2006) Implementation of the modified leader progression model in backflashover analysis. In: First International Power and Energy Conference (PECon 2006), 28-29 Nov. 2006, Mariott Hotel, Putrajaya, Malaysia. (pp. 516-521).

Abbas, Kassim Ali and Megat Ahmad, Megat Mohamad Hamdan and Salit, Mohd Sapuan and Wan, M. A. and Bakar, Jamilah and I., Dincer (2006) Numerical analysis of heat transfer in cooling of fish packages. International Communications in Heat and Mass Transfer, 33 (7). pp. 889-897. ISSN 0735-1933

Abd Rahim, Irfan (2006) Development of an Experimental Facility for Measurement of Tangential Jet Flow in a Sudden Expansion Channel. Masters thesis, Universiti Putra Malaysia.

Abd. Wafti, Nur Sulihatimarsyila (2006) Regeneration and characterization of Spent Bleaching Clay. Masters thesis, Universiti Putra Malaysia.

Abdelhameed Mokhtar, Rania and Khatun, Sabira and Mohd Ali, Borhanuddin and Saeed, Rashid Abdelhaleem (2006) Cognitive radio technology for flexible spectrum sharing. In: 2006 4th Student Conference on Research and Development (SCOReD 2006), 27-28 June 2006, Concorde Hotel, Shah Alam. (pp. 44-48).

Abdul Aziz, Azlan and Ali, Faisal and Choong, Foong Heng and Mohammed, Thamer Ahmed and Kim Huat, Bujang (2006) Collapsibility and volume change behavior of unsaturated residual soil. American Journal of Environmental Sciences, 2 (4). pp. 161-166. ISSN 1553-345X; ESSN: 1558-3910

Abdul Aziz, Faieza and Nicholas, Ieuan A. (2006) Visual feedback information for virtual lifting tasks. In: 2nd IET International Conference on Intelligent Environments (IE 06), 5-6 July 2006, Athens, Greece. (pp. 189-196).

Abdul Jalil, Nawal Aswan (2006) Mathematical models for the apparent mass of the seated person exposed to fore-and-aft vibration. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 18-32).

Abdul Kadir @ Jaafar, Muhammad Zamzuri and Md Ali, Mas Izyani and Ahmad, A. and Mohamad, Romli and Mahdi, Mohd Adzir (2006) Brillouin–Raman comb fiber laser with cooperative Rayleigh scattering in a linear cavity. Optics Letters, 31 (7). pp. 918-920. ISSN 0146-9592; ESSN: 1539-4794

Abdul Rashid, Suraya and Vargis, C. and Yunus, Robiah and Shamsudin, Shuhaimi (2006) Evaluation of carbon vapour deposition technique for whiskerization treatment of carbon fibers. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 483-488).

Abdul-Malek Salim, Ramzia (2006) Development of an Electrode Using Carbon Nanotubes as a Support Material for Direct Methanol Fuel Cell. Masters thesis, Universiti Putra Malaysia.

Abdullah, Abdul Ghani Liew and Sulaiman, Nasri and Aruora, M. K. (2006) Optimization of headspace sampling using solid-phase microextraction (SPME) for volatile components in starfruit juice. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 249-255).

Abdullah, Abdul Ghani Liew and Megat Mohd Noor, Megat Johari and Muyubi, Suleyman Aremu and Fugara, A.M.S. and Muhammed, T.A. and Iyuke, S.E. (2006) Surface water clarification using M. oleifera seeds. International Journal of Environmental Studies, 63 (2). pp. 211-219. ISSN 0020-7233

Abdullah, Abdul Ghani Liew and Sobri, Shafreeza and Mustapa Kamal, Siti Mazlina and Mohd Salleh, Mohammad Amran and Megat Mohd Noor, Megat Johari and Osman, Mohd Rasid and Wagiran, Rahman (2006) Azo dye removal by adsorption using waste biomass: sugarcane bagasse. In: Seminar on Engineering and Technology (SET2006) , 4 - 5 Sept. 2006, Putrajaya, Malaysia. (pp. 461-465).

Abdullah, Ermira Junita (2006) Effect of aspect ratios on longitudinal and lateral motions of unmanned aerial vehicle. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 58-70).

Abdullah, M. Khazani and Abu Talib, Abd Rahim and Mohd Suradi, Nur Riza and Mokhtar, Ahmad Samsuri and Jamaludin, Nordin and Zainuddin, M.F. (2006) K-chart: research planning and monitoring tool for engineering and technology applications. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 180-185).

Abdullah, Mohamad Khazani and Mohd Suradi, Nur Riza and Jamaluddin, Nordin and Mokhtar, Ahmad Samsuri and Abu Talib, Abd Rahim and Zainuddin, Mohd Faizal (2006) K-chart: a tool for research planning and monitoring. Journal of Quality Measurement and Analysis, 2 (1). pp. 123-129. ISSN 1823-5670

Norhafizah Abdullah (2006) Therapeutic agent for treating cancer. UNSPECIFIED.

Abo-Alhol, Tariq R. A. and Ismail, Md. Yusof and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan (2006) Effects of quality circle participation on employee perception and attitude in five Malaysian companies. Journal of Scientific and Industrial Research, 65 (12). pp. 970-976. ISSN 0022-4456; ESSN: 0975-1084

Abu Bakar, Anita (2006) Effects of Partial Esters on the Properties of Palm-Based Trimethylolpropane Esters. Masters thesis, Universiti Putra Malaysia.

Abu Khadra, Fayiz Y. M. (2006) Neural Network Model and Finite Element Simulation of Spring back in Plane-Strain Metallic Beam Bending. Doctoral thesis, Universiti Putra Malaysia.

Abu Talib, Abd Rahim and Jaafar, Abdul Aziz and Mokhtar, Ahmad Samsuri and Abd. Rahim, Irfan and Abdul Karim, M. S. (2006) Effects of blowing ratio on the heat transfer coefficient distribution downstream of a single film cooling hole. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 425-435).

Ahmad, Hilton @ Mohd Hilton (2006) Safety evaluation of Bakun concrete faced rockfill dam. Masters thesis, Universiti Putra Malaysia.

Ahmad Hamarsheh, Mohammad Mahmoud Naji (2006) Development of a Dynamic Frequency Hopping Code System for Optical Code Division Multiple Access Communications. PhD thesis, Universiti Putra Malaysia.

Ahmad Hamarsheh, Mohammad Mahmoud Naji and Abdullah, Mohamad Khazani and Khatun, Sabira and Shalaby, Hossam M. H. (2006) Configuration design and performance analysis of a fast frequency modulation optical CDMA communication system. Malaysian Journal of Computer Science, 19 (1). pp. 1-8. ISSN 0127-9084

Ahmad Khan, Imtiaz (2006) Prediction Modeling for Future Electrical Energy Demand in Malaysia. Masters thesis, Universiti Putra Malaysia.

Ahmad Shauri, Ruhizan Liza (2006) Optical Transmission-Based Water Turbidity Measurement System. Masters thesis, Universiti Putra Malaysia.

Ahmad Shauri, Ruhizan Liza and Wagiran, Rahman and Mohd Noor, Samsul Bahari and Mohd Sidek, Roslina and Abdullah, Abdul Ghani Liew (2006) Optical-transmission based water turbidity measurement system. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 33-37).

Ahmadun, Fakhru'l-Razi and Atieh, Muataz Ali and Girun, Nazlia and Chuah, Teong Guan and El-Sadig, M. and Awang Biak, Dayang Radiah (2006) Effect of multi-wall carbon nanotubes on the mechanical properties of natural rubber. Composite Structures, 75 (1-4). pp. 496-500. ISSN 0263-8223; ESSN: 1879-1085

Ahmed Al- Wathaf, Ahmed Hasan (2006) Development of Finite Element Code for Non-Linear Analysis of Interlocking Mortarless Masonry System. Doctoral thesis, Universiti Putra Malaysia.

Elsadiq Mahdi Ahmed Saad (2006) Crash-energy absorbing structure and method of fabrication. UNSPECIFIED.

Ahmed Salih, Elzubier (2006) Steady-state heat transfer to pseudoplastic fluid food in pipe flow. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 99-107).

Al-Kaissi, Ahmed Wathik Naji (2006) Enhancement of the Optical Transmission System Utilizing a Dual-Function Remotely Pumped Erbium-Doped Fiber Amplifier. PhD thesis, Universiti Putra Malaysia.

Al-Qdah, Malik Taysir (2006) Optical Beat Interference in Optical Communication System. Doctoral thesis, Universiti Putra Malaysia.

Alhalali, Safoan M. O. (2006) THD Improvement for Variable Speed Drive Using Single Phase Multilevel Inverter. Masters thesis, Universiti Putra Malaysia.

Ali, Aidy and Brown, M. W. and Gardiner, S. (2006) Microstructure and precipitate studies on 2024-T351 friction stir welding joints. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 363-373).

Ali, Aidy and Brown, Mike W. and Rodopoulos, Chris A. and Gardiner, S. (2006) Characterization of 2024-T351 friction stir welding joints. Journal of Failure Analysis and Prevention, 6 (4). pp. 83-96. ISSN 1547-7029

Ali Al-Talib, Sahar A. M. (2006) Scalability Improvement Of Multicast Source Movement Over Mobile Ipv6 Using Clustering Technique. PhD thesis, Universiti Putra Malaysia.

Alias, Nor Azlina (2006) Development of a Bio-Composite Interlocking Block System for River Revetment. Masters thesis, Universiti Putra Malaysia.

Aljibori, Hakim S. Sultan (2006) Experimental Investigation and Finite Element Analysis of Composite Conical Structures Subjected to Slip Loading. PhD thesis, Universiti Putra Malaysia.

Alraziqi, Adel Ahmed (2006) Geotechnical Behavior Of Shell Footings. PhD thesis, Universiti Putra Malaysia.

Ariffin, Hidayah (2006) Bacterial Cellulase from a Local Isolate, Bacillus Pumilus EB3. Masters thesis, Universiti Putra Malaysia.

Ariffin, Hidayah and Abdullah, Norhafizah and Md. Shah, Umi Kalsom and Shirai, Yoshihito and Hassan, Mohd Ali (2006) Production and characterisation of cellulase from Bacillus pumilus EB3. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 50-57).

Ishak Aris (2006) An apparatus for treating building surfaces and the like. UNSPECIFIED.

Aung, Min Min (2006) Effects of Crude Palm Oil on the Physico-Chemical Properties of Polyethylene Blown Film. Masters thesis, Universiti Putra Malaysia.

Awal, Md Abdul and Wan Ismail, Wan Ishak and Endan, Johari and Harun, Mohd Haniff (2006) Measurements of leaf area index using optical method (IAI-2000) in oil palm plantation: accuracy and limitation assessment. Pertanika Journal of Tropical Agricultural Science, 29 (1&2). pp. 15-24. ISSN 1511-3701; ESSN: 2231-8542

Awaludin, Noor Azita (2006) Analysis Of Thrust Density Calculation For Linear Dc Actuators. Masters thesis, Universiti Putra Malaysia.

Azhari, (2006) Synthesis of Palm Biodiesel Using Direct Application of Pure Sodium Methoxide as the Catalyst. Masters thesis, Universiti Putra Malaysia.

B

Badie, Mohamed Abdel and Ebrahimi, Mahdi and Abu Talib, Abd Rahim and Abdullah, Ermira Junita and Yunus, Robiah (2006) Design and analysis of a hybrid composite drive shaft for automotive applications. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 511-517).

Bahrom, Samsul Imran (2006) Development of a Computer Programme for the Static Analysis of Jacket Offshore Structures Subjected to Wave and Current Loading. Masters thesis, Universiti Putra Malaysia.

Bashi, Senan Mahmod and Al-Abulaziz, A. U. M. and Mailah, Nashiren F. (2006) Effects of high power electronics converters on PLC signals. Journal of Applied Sciences, 6 (9). pp. 1888-1891. ISSN 1812-5654

Biliyamin, Ibitoye Adeoye and Hamouda, Abdel Magid Salem and Wong, Shaw Voon and Radin Sohadi, Radin Umar (2006) Simulation of motorcyclist's kinematics during impact with W-Beam guardrail. Advances in Engineering Software, 37 (1). pp. 56-61. ISSN 0965-9978

Billa, Lawal (2006) Application of Hydro-Meteorological Model and GIS in Short Range Severe Flood Forecasting and Mapping. PhD thesis, Universiti Putra Malaysia.

Billa, Lawal and Mansor, Shattri and Mahmud, Ahmad Rodzi and Ghazali, Abdul Halim (2006) Modelling rainfall intensity from NOAA AVHRR data for operational flood forecasting in Malaysia. International Journal of Remote Sensing, 27 (23). 5225 -5234. ISSN 0143-1161

Billa, Lawal and Shattri, Mansor and Mahmud, Ahmad Rodzi and Ghazali, Abdul Halim (2006) Comprehensive planning and the role of SDSS in flood disaster management in Malaysia. Disaster Prevention and Management, 15 (2). pp. 233-240. ISSN 0965-3562

Birima, Ahmed Hussein and Megat Mohd Noor, Megat Johari and Mohammed, Thamer Ahmed and Muyibi, Suleyman Aremu and Idris, Azni (2006) Simultaneous organic and nitrogen removal using anoxic - aerobic membrane bioreactor. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 393-399).

Bockari-Gevao, Sahr Marvin and Wan Ismail, Wan Ishak and Yahya, Azmi and Teh, Christopher Boon Sung (2006) A modified soil tilth index and its relationship with rice yield. ScienceAsia, 32 (1). pp. 25-30. ISSN 1513-1874

C

Chan, Chee Sheng (2006) Spatial Apparent Electrical Conductivity of Paddy Soil as an Indicator of Rice Productivity. PhD thesis, Universiti Putra Malaysia.

Chet, Ngo Chon (2006) Development of Commercial Vehicle Speed Warning System. Masters thesis, Universiti Putra Malaysia.

Chin, S. W. and Spotar , Sergey Y. (2006) Freezing time prediction for film packaged food. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 83-91).

Chong, Fui Chin (2006) Production of Mono-and Diacylglycerols from the Esterification of Palm Oil Fatty Acid Distillate Catalyzed by Immobilized Rice Bran Lipase in a Packed Bed Reactor. Masters thesis, Universiti Putra Malaysia.

D

Daud, Mohd Razali (2006) Smart Vision System for Car Tire Condition Monitoring. Masters thesis, Universiti Putra Malaysia.

Dolah, Mohd Shahrizal (2006) Development of a New Jointing System for Open Plan Office System. Masters thesis, Universiti Putra Malaysia.

E

Ebrahimi, Mahdi and Sultan Aljibori, Hakim S. and Salem Hamouda, Abdel Magid and Omer, Ashraf Ali and Mokhtar, Ahmad Samsuri (2006) Experimental optimization of composite collapsible tubular energy absorber device. Thin-Walled Structures, 44 (11). 1201-1211 . ISSN 0263-8231

El-Harbawi, Mohanad M-A. (2006) Design and Development of an Integrated Chemical Accident System for Monitoring Risk Potential of Hazard Installation. PhD thesis, Universiti Putra Malaysia.

Esfandyari , Alireza and Osman, Mohd Rasid and Ismail, Napsiah and Megat Ahmad, Megat Mohamad Hamdan (2006) Value stream mapping: a tool to design the future state map aligned with lean manufacturing principles. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 342-350).

F

Filipski, Mohammad Nizam and Varatharajoo, Renuganth (2006) Satellite orbit estimation using earth magnetic field measurements. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 163-171).

G

Abdul Halim Ghazali (2006) Modular stormwater blocks. UNSPECIFIED.

Goudah, G. and Mahdi, El-Sadig and Abu Talib, Abd Rahim and Mokhtar, A. S. and Yunus, Robiah (2006) Automobile compression composite elliptic spring. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 241-248).

Gurusamy, Gobi (2006) Enhanced Ad Hoc On-Demand Distance Vector Routing Protocol For Mobile Ad Hoc Network Internet Connectivity. Masters thesis, Universiti Putra Malaysia.

H

Habaebi, Mohamed Hadi (2006) Macro/micro-mobility fast handover in hierarchical mobile IPv6. Computer Communications, 29 (5). pp. 611-617. ISSN 0140-3664

Haddud, Tarak Ali (2006) Design and Development of a Multi-Wavelength Brillouin/Erbium Long-Band Fabry Perot Fiber Laser. Masters thesis, Universiti Putra Malaysia.

Hamid, Hussain (2006) Development of Capacity and Level-of-Service for Uninterrupted Exclusive Motorcycle Lanes in Malaysia. PhD thesis, Universiti Putra Malaysia.

Hanafi, Marsyita (2006) Design and Development of Variable Fiber Optic Coupler. Masters thesis, Universiti Putra Malaysia.

Hasan Al-Qdah, Majdi Taysir (2006) Detection of Microcalcifications Using Wavelet Techniques in Mammogram Digital Images and Development of a Software for Evaluation of Radiologist Findings. Doctoral thesis, Universiti Putra Malaysia.

Hasan Khan, Mohammad Maifi and Ali, Salmiaton and Ahmadun, Fakhru'l-Razi and Alam, Md Zahangir (2006) Production of cellulase enzyme by solid state bioconversion on agricultural waste using Trichoderma species. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 186-192).

Hitam, Salasiah (2006) Improvement Of Free Space Optical Communications Using Double Carrier Modulation/Differential Detection. PhD thesis, Universiti Putra Malaysia.

Hizam, Hashim and Crossley, P. A. (2006) Single-ended fault location technique on a radial distribution network using fault generated current signals. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 406-416).

Holmes, J. and Zulkefli, Zamir Aimaduddin (2006) Experimental study of surface effects on the resonance of an acoustically driven bubble in xanthan gel. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 155-162).

Hon, K. K. B. and Baharudin, B. T. Hang Tuah (2006) The impact of high speed machining on computing and automation. International Journal of Automation and Computing, 3 (1). pp. 63-68. ISSN 1476-8186; ESSN: 1751-8520

Hussain, Siti Aslina and Mustapa Kamal, Siti Mazlina (2006) In-situ phase fractions for oil and water occupied in pipe channel. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 374-382).

I

Azni Idris (2006) System and apparatus for the treatment of organic effluents. UNSPECIFIED.

Iqbal, Syed Javaid and Ahmad, M.H.B. and Salem, A.M. Ramzia (2006) Single laser light source multi-channel PSK optical communication. Journal of Applied Sciences, 6 (1). pp. 223-226. ISSN 1812-5654

Ishak, Asnor Muizan (2006) Relationship Between Runoff Coefficient and Curve Number for Sungai Weng and Sungai Kayu Ara Catchments. Masters thesis, Universiti Putra Malaysia.

Ishak, Ruhaizad (2006) Development Of Flywheel Inverter System For Voltage Sag Mitigation. Masters thesis, Universiti Putra Malaysia.

J

Jaafar, Abdul Aziz and Abu Talib, Abd Rahim and Abdul Rahim, I. and Filipski, Mohammad Nizam and Salit, Mohd Sapuan (2006) Development of a testing facility for modelling cooling technique. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 108-116).

Jaafar, Mohd Saleh and Thanoon, Waleed Abdulmalik and Najm, Amad M. S. and Abdul Kadir, Mohd Razali and Abang Ali, Abang Abdullah (2006) Strength correlation between individual block, prism and basic wall panel for load bearing interlocking mortarless hollow block masonry. Construction and Building Materials, 20 (7). pp. 492-498. ISSN 0950-0618

Jabir, Amjad Najim (2006) Development of Iterative Minimum-Maximum Filter for Reducing Impulse Noise from Highly Corrupted Images. Masters thesis, Universiti Putra Malaysia.

Jacob, M. Suresh Devanesan (2006) Characterization Of Fretting Fatigue of 7075-T6 Aluminium Alloy. Doctoral thesis, Universiti Putra Malaysia.

Jafari, Seyed Mohammadbagher (2006) Critical Success Factors for the Implementation of Enterprise Resource Planning Systems in Malaysia. Masters thesis, Universiti Putra Malaysia.

Jafari, Seyed Mohammadbagher and Osman, Mohd Rasid and Mohd. Yusuff, Rosnah and Tang, Sai Hong (2006) ERP systems implementation in Malaysia: the importance of critical success factors. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 193-199).

Jahanshiri, Ebrahim (2006) Gis-Based Soil Sampling Methods for Precision Farming of Rice. Masters thesis, Universiti Putra Malaysia.

Jamaludin, Suhaimi (2006) Development of a Cut-Slope Stability Assessment System for Peninsular Malaysia. Masters thesis, Universiti Putra Malaysia.

Jayaprakash, J. (2006) Shear Strengthening of Reinforced Concrete Beams Using Externally Bonded Bi-Directional Carbon Fibre Reinforced Polymer. PhD thesis, Universiti Putra Malaysia.

K

Kanisin, Devaraj (2006) Theoretical Analysis On The Electrical Performance Of Long Coaxial Cable At Different Temperature. Masters thesis, Universiti Putra Malaysia.

Kanisin, Devaraj and Tang, Sai Hong and Ismail, Napsiah (2006) Designing subsea coaxial channel model as FIR filter on MATLAB. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 334-341).

Khalid, Mohammad and Ali, Salmiaton and Abdullah, Luqman Chuah and Ratnam, Chantara Thevy and Choong, Thomas Shean Yaw (2006) Effect of mapp as coupling agent on the mechanical properties of palm fiber empty fruit bunch and cellulose polypropylene biocomposites. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 149-154).

Sabira Khatun (2006) An enhanced mobile internet protocol version 6 (IPv6) with multicast function and hierarchical design. UNSPECIFIED.

Kim Huat, Bujang (2006) Deformation and Shear Strength Characteristics of Some Tropical Peat and Organic Soils. Pertanika Journal of Science & Technology, 14 (1 & 2). pp. 61-74. ISSN 0128-7680

Kim Huat, Bujang and Ali, Faisal and Choong, Foong Heng (2006) Effect of loading rate on the volume change behavior of unsaturated residual soil. Geotechnical and Geological Engineering, 24 (6). pp. 1527-1544. ISSN 0960-3182; ESSN: 1573-1529

Kim Huat, Bujang and Ali, Faisal and Low, Tian Huat (2006) Water infiltration characteristics of unsaturated soil slope and its effect on suction and stability. Geotechnical and Geological Engineering, 24 (5). pp. 1293-1306. ISSN 0960-3182; ESSN: 1573-1529

Kim Huat, Bujang and Han, Khee Kwong and Loh, Wooi Chuan and Ali, Faisal and A. Aziz, Azlan (2006) Retaining structures : design and construction in tropical soils. Universiti Putra Malaysia Press, Serdang, Selangor. ISBN 9789833455506

Koay, Gregory Feng Ling and Abdullah, Luqman Chuah and Yunus, Robiah and Choong, Thomas Shean Yaw and Siwayanan, Parthiban and Ahmad, Salmiah (2006) Crystallization of dihydroxystearic acid (DHSA) produced from commercial grade palm oil based crude oleic acid employing isopropyl alcohol as solvent: a preliminary study. In: Seminar on Engineering and Technology (SET2006) , 4 -5 Sept. 2006, Putrajaya, Malaysia. (pp. 466-475).

Koh, Johnny Siaw Paw and Aris, Ishak and Ramachandaramurthy, Vigna Kumaran and Bashi, Sinan Mahmod and Marhaban, Mohammad Hamiruce (2006) Design, development and performance optimization of a new artificial intelligent controlled multiple-beam optical scanning module. Journal of Applied Sciences, 6 (10). pp. 2201-2208. ISSN 1812-5654

Krishnan, Vijayaraghavan and Ahmad, Desa and Ibrahim, Mohd Khairil and Herman, Haryati Naemmah (2006) Isolation of hydrogen generating microflora from cow dung for seeding anaerobic digester. International Journal of Hydrogen Energy, 31 (6). pp. 708-720. ISSN 0360-3199

Kumoro, Andri Cahyo and Hasan, M. (2006) Modeling of supercritical carbon dioxide extraction of andrographolide from Andrographis paniculata leaves by employing integral desorption concept. In: Seminar on Engineering and Technology 2006, 4-5 Sep. 2006, Palm Garden Hotel, Putrajaya, Malaysia. .

L

Laseima, Saleh Yhya (2006) Structural Behavior of Ferrocement-Autoclave Block Composite Slab. Masters thesis, Universiti Putra Malaysia.

Lee, Lini and Jamuar, Sudhanshu Shekhar and Mohd Sidek, Roslina and Khatun, Sabira (2006) An improved power consumption circuit of a 5.7 GHz variable-gain low noise amplifier (VGLNA) for RF applications. In: 2006 International RF and Microwave Conference, 12-14 Sept. 2006, Putrajaya, Malaysia. (pp. 66-70).

Lim, Kok Jeng (2006) Stiffness and Strength of a Modified External Skeletal Fixator for Orthopaedic Treatment of Animals. Masters thesis, Universiti Putra Malaysia.

Lim, Ying Pio (2006) Effects of Grain Refinement on The Cooling Rate, and Microstructural and Mechanical Properties of Al-Si Sand Castings. Doctoral thesis, Universiti Putra Malaysia.

Ling, Tau Chuan and Lan, John Chi Wei and Lyddiatt, Andrew (2006) The operation performance of an expanded bed contactor characterised by mechanical stirring. Asia Pacific Journal of Molecular Biology and Biotechnology, 14 (1). pp. 27-31. ISSN 0128-7451

Ling, Tau Chuan and Lyddiatt, Andrew (2006) Effect of polymer shielding on elution of G3PDH bound to dye-ligand adsorbent. Biotechnology and Bioprocess Engineering, 11 (1). pp. 84-87. ISSN 1226-8372; ESSN: 1976-3816

Loo, Woon Chek (2006) Ergonomic Considerations for Assembly and Disassembaly of Cng Tanks on a Vehicle. Masters thesis, Universiti Putra Malaysia.

Look, Kar Yang (2006) Theory and Simulation of Incipient Instability in Gas-Solid Fluidization. Masters thesis, Universiti Putra Malaysia.

M

M., Saleem and A. H., Sadiyal and Prasetyo, Edi and P. R., Arora (2006) Evolutionarily stable strategies for defensive switching. Applied Mathematics and Computation, 117 (2). pp. 697-713. ISSN 0096-3003

M. Qudsieh, Isam Yassin (2006) Synthesis, Characterization and Application of Polyacrylamide Grafted Sago Strach for Coagulation and Flocculation Processes. Doctoral thesis, Universiti Putra Malaysia.

Mahdi Ahmad Saad, Elsadig and Mokhtar, Ahmad Samsuri and Asari, N. A. and Elfaki, Faiz. A. M. and Abdullah, E. J. (2006) Nonlinear finite element analysis of axially crushed cotton fibre composite corrugated tubes. Composite Structures, 75 (1-4). pp. 39-48. ISSN 0263-8223

Mansor, Hasmah (2006) Fuzzy Control of Continuous Stirred Tank Reactor. Masters thesis, Universiti Putra Malaysia.

Mariun, Norman and Masdi, Hendri and Bashi, Senan M. and Mohamed, Azah and Yusuf, Sallehhudin (2006) Design of a prototype D-STATCOM using DSP controller for voltage sag mitigation. In: 2006 IEEE Power India Conference, 10-12 Apr. 2006, New Delhi, India. .

Mat Said, Aini (2006) Development and Application of a Malaysian Socio-Technical Disaster Model. PhD thesis, Universiti Putra Malaysia.

Mat Said, Aini (2006) Malaysian Socio-Technical Disaster Model and Learning System. PhD thesis, Universiti Putra Malaysia.

Md Rejab, Mohd Noor Arib and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Md. Tahir, Paridah and Mohd Dahlan, Khairul Zaman (2006) Mechanical properties of pineapple leaf fibre reinforced polypropylene composites. Materials and Design, 27 (5). pp. 391-396. ISSN 0264-1275; ESSN: 1873-4197

Md Tohit, Khairul Nizam (2006) Improvement of Accuracy Level of Automotive Front Fender Shield Assembly Using Process Failure Mode and Effect Analysis and Control Plan Techniques. Masters thesis, Universiti Putra Malaysia.

Md. Noh, Mohammad Soffi (2006) Nonlinear finite element analysis of integral bridge including foundation soil interaction. Masters thesis, Universiti Putra Malaysia.

Md. Noor, Nurazuwa (2006) Comparative study on structural behaviour of bonded and unbonded post-tensioned beam. Masters thesis, Universiti Putra Malaysia.

Md. Rahim, Mohd Syazwan and Haron, Nuzul Azam and Hassim, Salihudin and Abdul Kadir, Mohd Razali (2006) A survey on construction cost comparison between conventional and industrialised building system for housing project. The Surveyor: Professional journal of the Institution of Surveyors Malaysia, 41.3. pp. 10-13. ISSN 0127-4937

Md. Tomari, Mohd Razali (2006) Detection and Classification of Moving Objects for an Automated Surveillance System. Masters thesis, Universiti Putra Malaysia.

Md. Yasin, Faizah (2006) Production of Carbon Nanotubes for Gas Sensor Application. Masters thesis, Universiti Putra Malaysia.

Megat Mohd Noor, Megat Johari and Saed, Katayon and Abdullah, Abdul Ghani Liew (2006) Treatment of textile wastewater using activated sludge process and hydrogen peroxide. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 518-533).

Misron, Norhisam and Khamis, Alias and Raja Othman, Raja Nor Firdaus Kashfi and Bashi, Senan M. and Mariun, Norman and J., Abdul Razak (2006) Comparison on thrust characteristic of linear oscillatory actuators. In: First International Power and Energy Conference (PECon 2006), 28-29 Nov. 2006, Mariott Hotel, Putrajaya, Malaysia. (pp. 470-475).

Misron, Norhisam and Mat Saad, Ezril Hisham and Bashi, Senan M. and Mariun, Norman and Wakiwaka, Hiroyuki and Nirei, Masami (2006) Positioning system for sensor less linear DC motor. In: First International Power and Energy Conference (PECon 2006), 28-29 Nov. 2006, Mariott Hotel, Putrajaya, Malaysia. (pp. 476-481).

Mohamad, Mahmod Abd Hakim and Basri, ShahNor and Abd. Rahim, Irfan and Mohamad, Musli (2006) An AUSM-based third-order compact scheme for solving Euler equations. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 229-240).

Mohamad, Rosalina and Harun, Harlisya and Nuzli, Mohamad Anas and Dimyati, Kaharudin (2006) Design of a flexible digital baseband signal processing algorithm. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 498-510).

Mohamed, Harimi (2006) Application of Theoretical Combustion Analysis in Determining the Optimum Fibre/Shell Ratio for Oil Mill Boiler. PhD thesis, Universiti Putra Malaysia.

Mohamed, Mustafa Yousif (2006) A Methodology for Assessing The Impact of Landuse Changes on Watershed Runoff. Doctoral thesis, Universiti Putra Malaysia.

Thamer Ahmed Mohamed (2006) Precast inverted triangular shell footing. UNSPECIFIED.

Mohamed @ Mahmood, Masniza (2006) The Influence Of M13 Bacteriophage On Protein Adsorption Using Anion Exchange Expanded Bed Chromatography. Masters thesis, Universiti Putra Malaysia.

Mohamed Khmag, Asem Ib. (2006) Modified Data Encryption Standard Algorithm for Textbased Applications. Masters thesis, Universiti Putra Malaysia.

Mohammad, Karimadini (2006) Development of a Crisp Fuzzy-Like Controller Using Formula-Based and Vectorized Approaches. Masters thesis, Universiti Putra Malaysia.

Mohammad, Musli (2006) Strategies for Implementing Integrated Management System in the Malaysian Manufacturing Companies. Masters thesis, Universiti Putra Malaysia.

Mohammed, Thamer Ahmed and Ghazali, Abdul Halim and Megat Mohd Noor, Megat Johari and Mohd Soom, Mohd Amin (2006) Determination and validation of G-factor for plastic manifolds. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 435-442).

Mohammed Khalid, Muhammad Nazir (2006) Deterministic Automatic Test Pattern Generation for Built-In Self Test System. Masters thesis, Universiti Putra Malaysia.

Mohd Jakarni, Fauzan (2006) Properties of Stone Mastic Asphalt Slabs Compacted Using a Newly Developed Roller Compactor. Masters thesis, Universiti Putra Malaysia.

Mohd Junusi, Riduan (2006) Spatial Variability of Oil Palm Leaf Nutrients and Yield. Masters thesis, Universiti Putra Malaysia.

Mohd Noor, Samsul Bahari and Maizan, Mohd Azhar (2006) xPC speed control of DC servo. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 534-539).

Mohd Saad, Norhafidzah (2006) Characteristics and Absorption Coefficient of Co2 Laser in Natural Gas Mixtures. Masters thesis, Universiti Putra Malaysia.

Mohd Suhadis, Nurulasikin and Varatharajoo, Renuganth (2006) New satellite attitude control structure using the geomagnetic field. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 43-49).

Mohd Yusoff, Mohd Faudzi (2006) Valuation of Fatal and Non-Fatal Injuries Due to Motorcycle Accidents in Malaysia. Doctoral thesis, Universiti Putra Malaysia.

Mokhtar, Makhfudzah and Abdullah, Mohamad Khazani and Walker, Stuart D. (2006) Towards ternary optical communication by soft decoding. In: 5th International Conference on Optical Internet (COIN 2006), 9-13 July 2006, Jeju, South Korea. (pp. 369-371).

Moloud Abufela, Basm Altaher (2006) Development of Laser Range Finder Using 1550 nm Wavelength. Masters thesis, Universiti Putra Malaysia.

Muhamad Halil, Faridah (2006) Contractor’s Perception of the Use of Statistical Approach in the Tender Process at the Public Works Department, Malaysia. Masters thesis, Universiti Putra Malaysia.

Muhammad, and Jamari, Saidatul Shima and Chuah, Teong Guan and Abdul Rashid, Suraya and Choong, Thomas Shean Yaw (2006) Single and binary adsorptions of heavy metals onto activated carbon - equilibrium studies. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 476-482).

Muhammad, Muhammad (2006) Equilibrium and Kinetics of Cadmium and Zinc Adsorption on Activated Carbon from Palm Kernel Shell. Masters thesis, Universiti Putra Malaysia.

Muhammad Noor, Ahmad Shukri (2006) Design and Development of a Dual-Core Erbium Doped Amplifier for Polarization-multiplexed Signals. Masters thesis, Universiti Putra Malaysia.

Mustafa, Intan Shafinaz (2006) Fingerprint Image Watermarking Using Encrypted Identification Number. Masters thesis, Universiti Putra Malaysia.

Mustapa Kamal, Siti Mazlina and Webb, C. and Hussain, Siti Aslina (2006) Comparison of energy consumption between recycle and conventional process of flour milling : at break system. In: Proceedings Seminar on Engineering and Technology 2006, 4-5 Sep. 2006, Palm Garden Hotel, Putrajaya, Malaysia. .

Mustapa Kamal, Siti Mazlina and Webb, C. and Abdullah, Abdul Ghani Liew (2006) Effects of roll differential on recycle grinding system in flour milling process: at second break. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 383-392).

Mustapa Kamal, Siti Mazlina and Webb, C. and Hussain, Siti Aslina (2006) Comparison of energy consumption between recycle and conventional process of flour milling: at break system. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 9-17).

Mutasher, Saad A. (2006) Evaluation of Mechanical Properties of Hybrid Aluminium/Fiber-Reinforced Composites. PhD thesis, Universiti Putra Malaysia.

N

Na'mi, Saleem (2006) Finite Element Analysis Of Hydraulic Bulging Of Metal Tubes. Masters thesis, Universiti Putra Malaysia.

Naghshineh, Ali (2006) Finite Element Analysis of Cooling Tower Foundation Under Wind Load. Masters thesis, Universiti Putra Malaysia.

Natsheh, Essam Fathi (2006) Performance Enhancement of Routing Protocols in Mobile Wireless Ad-Hoc Networks Using Fuzzy Reasoning Algorithm. PhD thesis, Universiti Putra Malaysia.

Ng, Eng Boon (2006) Determination of Energy Requirements for Dry Land Tillage Using Spatial Variability Technique. Masters thesis, Universiti Putra Malaysia.

Ng, S. C. and Saed, Katayon and Megat Mohd Noor, Megat Johari and Abdullah, Abdul Ghani Liew (2006) The effectiveness of Moringa oleifera as primary coagulant in high-rate settling pilot scale water treatment plant. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 256-265).

Ng, Shu Chin (2006) Coagulation Performance of Moringa Oleifera Seeds Stored Under Different Preservation Conditions. Masters thesis, Universiti Putra Malaysia.

Ng, Sook Kuen (2006) Characteristics and Efficiency of Bleaching Clays in the Physical Refining of Palm Oil. Masters thesis, Universiti Putra Malaysia.

Nik Mohamed, Nik Mohd Zuki (2006) An Improved Method to Reduce Development Time for New Models of Proton. Masters thesis, Universiti Putra Malaysia.

Nissirat, Liyth Ahmad (2006) Development of Inductive Quarter Wave Radio Frequency Coaxial Resonant Cavity for a Compressed Natural Gas Ignition. Masters thesis, Universiti Putra Malaysia.

Noordin, Nor Kamariah (2006) A Scheme For Space-Time-Frequency Coding And Adaptive Multiple Antenna Selection For Improving The Performance Of Multiple-Input Single-Output Ofdm System. PhD thesis, Universiti Putra Malaysia.

Noorzaei, Jamaloddin and Bayagoob, Khaled Hamood and Thanoon, Waleed Abdulmalik and Jaafar, Mohd Saleh (2006) Thermal and stress analysis of Kinta RCC dam. Engineering Structures, 28 (13). pp. 1795-1802. ISSN 0141-0296

Noorzaei, Jamaloddin and Naghshineh, Ali and Abdul Kadir, Mohd Razali and Thanoon, Waleed Abdulmalik and Jaafar, Mohd Saleh (2006) Nonlinear interactive analysis of cooling tower–foundation–soil interaction under unsymmetrical wind load. Thin-Walled Structures, 44 (9). pp. 997-1005. ISSN 0263-8231

O

Omar, Rozita and Abdullah, M. A. and Hasan, M. A. and Mohammad, Rosfarizan and Mahmood, Maziah (2006) Kinetics and modelling of cell growth and substrate uptake in Centella asiatica cell culture. Biotechnology and Bioprocess Engineering, 11 (3). pp. 223-229. ISSN 1226-8372

Ooi, Wei Han (2006) Development of a Mobile Robot Spatial Data Acquisition System. Masters thesis, Universiti Putra Malaysia.

Othman, Mohammad Lutfi and Aris, Ishak and Mariun, Norman and Sahbudin, Ratna Kalos Zakiah (2006) Knowledge-based power system protection design courseware. Journal of Applied Sciences, 6 (15). pp. 2963-2977. ISSN 1812-5654

Oyop, Siti Mastura (2006) Compliance Audit of Safety, Health, Environment and Services at Selected Ecotourism Sites in Malaysia. Masters thesis, Universiti Putra Malaysia.

P

P'ng, Won Tiang and Shaari, Sahbudin and Khatun, Sabira and Abdullah, Mohamad Khazani (2006) Protection mechanism and deployment cost analysis for Ethernet PON FTTH access network. In: 5th International Conference on Optical Internet (COIN 2006), 9-13 July 2006, Jeju, South Korea. (pp. 187-189).

Pin, Kar Yong and Chuah, Teong Guan and A., Abdull Rashih and Mat Ali, Rasadah and Choong, Thomas Shean Yaw and Law, C. L. (2006) Effects of the concentration of Quercus infectoria galls (Manjakani) extract on moisture content and quality of its freeze-dried product. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 200-207).

Pradhan, Biswajeet (2006) Compression of Three-Dimensional Terrain Data Using Lifting Scheme Based on Second Generation Wavelets. PhD thesis, Universiti Putra Malaysia.

Pradhan, Biswajeet and Kumar, Sandeep and Mansor, Shattri and Ramli, Abdul Rahman and Mohamed Sharif, Abdul Rashid (2006) Spatial data compression and denoising via wavelet transformation. Applied GIS, 2 (1). 6.1-6.16. ISSN 1832-5505

R

Raja Abdullah, R. S. A. and Ismail, A. (2006) Forward scattering radar: current and future applications. International Journal of Engineering and Technology, 3 (1). pp. 61-67. ISSN 1823-1039

Raja Abdullah, Raja Syamsul Azmir and Ismail, Alyani (2006) Forward scattering radar: current and future applications. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 92-98).

Razalli, Mohammad Shahrazel (2006) Design and Development of a Wireless Radio Frequency Identification Reader Communication System at UHF Band. Masters thesis, Universiti Putra Malaysia.

Rezaei, Fateme (2006) Development of Short Carbon Fibre Reinforced Polypropylene Composite for Car Bonnet. Masters thesis, Universiti Putra Malaysia.

Rusnam, (2006) Development of Non-Point Source Pollution Model for Maize Cultivation Under Tropical Condition. PhD thesis, Universiti Putra Malaysia.

S

Saadat, Md. Nazmus (2006) Design and development of a handheld bluetooth-based application system framework for controlling and monitoring remote devices. Masters thesis, Universiti Putra Malaysia.

Saed, Katayon and Megat Mohd Noor, Megat Johari and M., Asma and Abdullah, Abdul Ghani Liew and Mohammad Ali, Thamer Ahmad and Idris, Azni and Jusoh, Ahmad and Khor, B. C. and Suleyman, A. M. (2006) Effects of storage conditions of Moringa oleifera seeds on its performance in coagulation. Bioresource Technology, 97 (13). pp. 1455-1460. ISSN 0960-8524; ESSN: 1873-2976

Saed, Katayon and Ng, S.C. and Megat Mohd Noor, Megat Johari and Abdullah, Abdul Ghani Liew (2006) Preservation of coagulation efficiency of Moringa oleifera, a natural coagulant. Biotechnology and Bioprocess Engineering, 11 (6). pp. 489-495. ISSN 1226-8372; ESSN: 1976-3816

Saeed, Rashid Abdelhaleem and Khatun, Sabira and Mohd Ali, Borhanuddin and Abdullah, Mohamad Khazani (2006) Ultra-wideband local positioning for smart home applications. In: International Conference on Computing and Informatics (ICOCI 2006), 6-8 June 2006, Kuala Lumpur, Malaysia. (pp. 1-4).

Barkawi Sahari (2006) Led-based schlieren mirror system. UNSPECIFIED.

Barkawi Sahari (2006) Nozzle and seat geometry for direct injection. UNSPECIFIED.

Saharudin, Suhairi (2006) Development and Characterization of Multi-Wavelength Fiber Laser Light Sources Based on Erbium and Brillouin Gain. PhD thesis, Universiti Putra Malaysia.

Sahbudin, Ratna Kalos Zakiah and Syed Junid, Syed Alwee Aljunid and Abdullah, Mohamad Khazani and Othman, Mohamed and Samad, M. D. A. and Mahdi, Mohd Adzir and Ismail, Mahamod (2006) Performance comparison of complementary and AND subtraction detection techniques for hybrid SCM SAC-OCDMA system. In: 5th International Conference on Optical Internet (COIN 2006), 9-13 July 2006, Jeju, South Korea. (pp. 31-33).

Salih Al-Badri, Qussay Abbas (2006) Tumor Extraction for Brain Magnetic Resonance Imaging Using Modified Gaussian Distribution. Doctoral thesis, Universiti Putra Malaysia.

Salit, Mohd Sapuan (2006) Using the morphological chart technique for the design of polymeric-based composite automotive pedals. Discovery and Innovation, 18 (4). pp. 311-317. ISSN 1015-079X

Salit, Mohd Sapuan and A., Leenie and Mohamed, Harimi and Yeo, Kay Beng (2006) Mechanical properties of woven banana fibre reinforced epoxy composites. Materials and Design, 27 (8). pp. 689-693. ISSN 0264-1275; ESSN: 1873-4197

Samsu Baharuddin, Azhari (2006) Cellulase Production by a Locally Isolated Fungal Strain Grown on Oil Palm Empty Fruit Bunch. Masters thesis, Universiti Putra Malaysia.

Sanbasivam, Sivasankar (2006) Development of an Internet–Based System to Measure Thermal Comfort in Indoor Environments. Masters thesis, Universiti Putra Malaysia.

Sarkar, Md. Abdul Mannan (2006) Biodewaterability and Liquid State Bioconversion of Activated Sludge Under Non-Sterilized Conditions. Masters thesis, Universiti Putra Malaysia.

Satti Osman, Mohamed AbdelGadir (2006) Case study on indusrtialized building system (IBS). Masters thesis, Universiti Putra Malaysia.

Seyed Hakim, Seyed Jamalaldin (2006) Development and Applications of Artificial Neural Network for Prediction of Ultimate Bearing Capacity of Soil and Compressive Strength of Concrete. Masters thesis, Universiti Putra Malaysia.

Shaari, Ahmad Zaki (2006) Analysis and Fabrication of Fused Fiber Optic Couplers for Communication Systems. Masters thesis, Universiti Putra Malaysia.

Shaluf, Ibrahim Mohamed and Ahmadun, Fakhru'l-Razi (2006) Disaster types in Malaysia: an overview. Disaster Prevention and Management, 15 (2). pp. 286-298. ISSN 0965-3562

Shaluf, Ibrahim Mohamed and Ahmadun, Fakhru'l-Razi (2006) Technological disaster prevention – the case of Malaysia. Disaster Prevention and Management, 15 (5). pp. 783-792. ISSN 0965-3562; ESSN: 1758-6100

Shaluf, Ibrahim Mohamed and Ahmadun, Fakhru'l-Razi (2006) Technological emergencies expert system (TEES). Disaster Prevention and Management, 15 (3). pp. 414-424. ISSN 0965-3562; ESSN: 1758-6100

Shariff, Abdul Rashid Mohamed (2006) ISO certified biological and agricultural engineering tertiary. International Journal of Engineering Education, 22 (6). pp. 1182-1188. ISSN 0949-149X

Sheikh Abdul Kadir, Ibrahim (2006) Modeling Mode Choice Behavior of Motorcyclists in Malaysia. PhD thesis, Universiti Putra Malaysia.

Sheikh Naimullah, Bibi Sarpinah and Hitam, Salasiah and Hazwan, W. M. and Othman, Maisara and Abdullah, Mohamad Khazani (2006) Haze effects on the propagation of free space optical communications in Malaysia. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 400-405).

Siew, Fong Wah (2006) Theory and Simulation of the Onsets of Convection Induced by Liquid Diffusion in Liquid and Incipient Instability Caused by Liquid Now in Particle Bed. Masters thesis, Universiti Putra Malaysia.

Silvarajah, Deepalaxmi (2006) Performance Evaluation of Phorizon and Pjet_Veot Reservation Schemes for Optical Burst Switching. Masters thesis, Universiti Putra Malaysia.

Soin, Nor Hayati and Majlis, Burhanuddin Yeop (2006) Kajian Mengenai Kebersandaran Pembentukan Keadaan Potong Bawah Penjuru Terhadap Jenis Larutan Pemunar dalam Penghasilan Diafram Beralun Silikon. Pertanika Journal of Science & Technology, 14 (1 & 2). pp. 41-52. ISSN 0128-7680

Subramaniam, Jeevan Rao (2006) Enhancement of Space-Time Receiver Structure with Multiuser Detection for Wideband CDMA Communication Systems. Masters thesis, Universiti Putra Malaysia.

Suhatril, Meldy (2006) Seismic analysis of a 30 story salemba apartment in Jakarta subjected to nabire earthquake excitation. Masters thesis, Universiti Putra Malaysia.

Shamsuddin Sulaiman (2006) Apparatus for producing corrugated composite structures and method for making the same. UNSPECIFIED.

Sulaiman, Siti Zubaidah (2006) Batch Production of Trimethylolpropane Ester From Palm Oil as Lubricant Basestock. Masters thesis, Universiti Putra Malaysia.

Syed Nor Azlan, Syarifah Ezdiani (2006) Bandwidth Performance Analysis of a Remote Monitoring Surveillance System. Masters thesis, Universiti Putra Malaysia.

Syed Shaharuddin, Sharifah Imihezri and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Megat Ahmad, Megat Mohamad Hamdan and Zainuddin, Edi Syams and Osman, Mohd Rasid and Abdul Rahman, Mohd Zaki (2006) Mould flow and component design analysis of polymeric based composite automotive clutch pedals. Journal of Materials Processing Technology, 171 (3). pp. 358-365. ISSN 0924-0136

T

Zahari Taha (2006) Fuel rail for direct injection gaseous engine. UNSPECIFIED.

Tan, Boon Chew (2006) Facility management basic philosophy and concept. Masters thesis, Universiti Putra Malaysia.

Tan, Chee Fai and Shamsuddin, Shamsul Anuar and Shafie, Mohd. Hazani and Osman, Mohd. Rasid (2006) The effect of inner diaphragms and continuous sill section on the stiffness of automotive B-pillar. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 218-228).

Tan, Kean Sheng and Wong, Shaw Voon and Radin Sohadi, Radin Umar and Hamouda, Abdel Magid Salem and Megat Ahmad, Megat Mohamad Hamdan (2006) Experimental study on energy absorption characteristics of motorcycle front wheel—tyre assembly in frontal impact. International Journal of Crashworthiness, 11 (2). pp. 131-142. ISSN 1358-8265; ESSN: 1754-2111

Tan, Yan Peng and Tau, Chuan Ling and Tan, Wen Siang and Yusoff, Khatijah and Tey, Beng Ti (2006) Purification of recombinant nucleocapsid protein of Newcastle disease virus from unclarified feedstock using expanded bed adsorption chromatography. Protein Expression and Purification, 46 (1). pp. 114-121. ISSN 1046-5928

Tan, Yan Peng and Tau, Chuan Ling and Tan, Wen Siang and Yusoff, Khatijah and Tey, Beng Ti (2006) Recovery of histidine-tagged nucleocapsid protein of Newcastle disease virus using immobilised metal affinity chromatography. Process Biochemistry, 41 (4). pp. 874-881. ISSN 0032-9592

Teck, Teh Kian (2006) Development of a Road Construction Material Selection System. Masters thesis, Universiti Putra Malaysia.

V

Varatharajoo, Renuganth (2006) Hybrid spacecraft attitude control systems. In: Multiphysics 2006, 14-15 Dec 2006, Maribor,Slovenia. .

Vasili, Mohammad Reza and Homayouni, S. Mahdi and Tang, Sai Hong and Ismail, Napsiah (2006) Comparison of different dwell point policies for SP-AS/RS. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 288-301).

Vijayaraghavan, Krishnan and Ahmad, Desa (2006) Biohydrogen generation from palm oil mill effluent using anaerobic contact filter. International Journal of Hydrogen Energy, 31 (10). pp. 1284-1291. ISSN 0360-3199; ESSN: 1879-3487

Vijayaraghavan, Krishnan and Ahmad, Desa and Ibrahim, Mohd Khairil (2006) Biohydrogen generation from jackfruit peel using anaerobic contact filter. International Journal of Hydrogen Energy, 31 (5). pp. 569-579. ISSN 0360-3199

Vijayaram, Thoguluva Raghavan (2006) Properties of Metal Matrix Composite of Aluminium 11.8% Silicon Reinforced with Different Particulates. Doctoral thesis, Universiti Putra Malaysia.

W

Wahi, Rafeah and Idris, Azni and Mohd Salleh, Mohamad Amran and Khalid, Kaida (2006) Low-temperature microwave pyrolysis of sewage sludge. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 302-308).

Wai, Kien Tat and Saed, Katayon and Megat Mohd Noor, Megat Johari and Idris, Azni and Muyibi, Suleyman Aremu (2006) Sewage sludge conditioning using cationic, anionic and non-ionic polymers. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 135-148).

Walvekar, Rashmi G. and Hussain, Siti Aslina and Choong, Thomas Shean Yaw (2006) CFD for liquid-liquid dispersed flows in horizontal pipe. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 208-211).

Wan Adnan, Wan Azinun and Abdul Karim, S. and Hitam, Salasiah (2006) Multilevel Wavelet Decomposition Watermarking Techniques. In: Proceedings Seminar on Engineering and Technology 2006, 4-5 September 2006, Palm Garden Hotel, Putrajaya, Malaysia. .

Wan Adnan, Wan Azizun and Abdul Kareem, Sameem and Hitam, Salasiah (2006) Multilevel wavelet decomposition watermarking techniques. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 38-42).

Wan Hasan, Wan Hafiza (2006) Peak to Average Power Ratio Reduction Using the Clipping Technique in Orthogonal Frequency Division Multiplexing System. Masters thesis, Universiti Putra Malaysia.

Wan Zaki, Wan Suhaimizan (2006) Design and Fabrication of Batio3 Humidity Sensor Using Thick Film Screen Printing Technique. Masters thesis, Universiti Putra Malaysia.

Wan Zaki, Wan Suhaimizan and Wagiran, Rahman and Mohd Noor, Samsul Bahari and Shaari, Abdul Halim (2006) Thick film paste preparation and characterization of BaTiO3 for humidity sensor. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 417-424).

Wijopriono (2006) Distribution of Pelagic Fish Species in the Java Sea From Remote Sensing Data. Doctoral thesis, Universiti Putra Malaysia.

Wong, Lee Ing (2006) Dispersion of Particulate Matter from Palm Oil Refinery Mill. Masters thesis, Universiti Putra Malaysia.

Wong Shaw Voon (2006) Pendulum impact test rig. UNSPECIFIED.

Y

Yap, Yoke Kin (2006) Development of a Rice Combine Harvester Instrumentation System for Mapping of Crop Yield and Field Performance. Masters thesis, Universiti Putra Malaysia.

Yeat, Chooi Fong (2006) The Effect of Thin-Layer Elements in Structural Modeling of Rail-Track Supporting System. Masters thesis, Universiti Putra Malaysia.

Yong, Chu Eu (2006) Micro-Mobility Enhancement in Multicast Mobile Ipv6 Wireless Networks. Masters thesis, Universiti Putra Malaysia.

Yusof, Yus Aniza and Smith, A. C. and Briscoe, B. J. (2006) Deformation of food powders by nanoindentation. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 71-82).

Z

Zahari, Rizal and El Zafrany, Ahmed (2006) Progressive damage analysis of composite layered plates using a mesh reduction method. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 117-134).

Zahi, Souilah and Hashim, Mansor and Daud, Abdul Razak (2006) Preparation of Ni–Zn–Cu ferrite particles by sol–gel technique. Materials Letters, 60 (23). pp. 2803-2806. ISSN 0167-577X

Zakaria, Fiona (2006) Effects Of Hydraulic Loading Rates On Sewage Treatment Efficiency Of Constructed Wetlands. Masters thesis, Universiti Putra Malaysia.

Zan, Zuraidah and Abdullah, Mohamad Khazani and Syed Junid, Syed Alwee Aljunid and Sahbudin, Ratna Kalos Zakiah and Yaacob, Mohd Hanif and Mokhtar, Makhfudzah and Shaari, Sahbudin (2006) Wavelength shifting in the Fiber Bragg Grating (FBG) based encoder and decoder modules for SAC-OCDMA system. In: 2006 IEEE International Conference on Semiconductor Electronics (ICSE 2006), 29 Nov.-1 Dec. 2006, Kuala Lumpur, Malaysia. (pp. 996-1000).

Zan, Zuraidah and Syed Junid, Syed Alwee Aljunid and Abdullah, Mohamad Khazani and Sahbudin, Ratna Kalos Zakiah and Yaacob, Mohd Hanif and Mokhtar, Makhfudzah and Shaari, Sahbudin (2006) Effects of the power differences in the AND-subtraction detection technique in SAC-OCDMA system performance. In: 2006 IEEE International Conference on Semiconductor Electronics (ICSE 2006), 29 Nov.-1 Dec. 2006, Kuala Lumpur, Malaysia. (pp. 1001-1005).

Zulkifli, Shamsul Aizam (2006) Simulation of Linear Feedback Control of D-Statcom for Voltage Sag Mitigation. Masters thesis, Universiti Putra Malaysia.

This list was generated on Tue Apr 16 14:19:57 2024 +08.