Browse by Faculty

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Author | Item Type | No Grouping
Number of items: 159.

Ali Al-Talib, Sahar A. M. (2006) Scalability Improvement Of Multicast Source Movement Over Mobile Ipv6 Using Clustering Technique. PhD thesis, Universiti Putra Malaysia.

A. K., Elwaleed and Yahya, Azmi and Bardaie, Mohd Zohadie and Ahmad, Desa and Abdelmotalab Fadlelmola, Kheiralla (2006) Net traction ratio prediction for high-lug agricultural tyre. Journal of Terramechanics, 43 (2). pp. 119-139. ISSN 0022-4898

Abbas, Kassim Ali and Megat Ahmad, Megat Mohamad Hamdan and Salit, Mohd Sapuan and Wan, M. A. and Bakar, Jamilah and I., Dincer (2006) Numerical analysis of heat transfer in cooling of fish packages. International Communications in Heat and Mass Transfer, 33 (7). pp. 889-897. ISSN 0735-1933

Abd Rahim, Irfan (2006) Development of an Experimental Facility for Measurement of Tangential Jet Flow in a Sudden Expansion Channel. Masters thesis, Universiti Putra Malaysia.

Abd. Wafti, Nur Sulihatimarsyila (2006) Regeneration and characterization of Spent Bleaching Clay. Masters thesis, Universiti Putra Malaysia.

Abdul-Malek Salim, Ramzia (2006) Development of an Electrode Using Carbon Nanotubes as a Support Material for Direct Methanol Fuel Cell. Masters thesis, Universiti Putra Malaysia.

Abo-Alhol, Tariq R.A. and Ismail, Md. Yusof and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan (2006) Effects of quality circle participation on employee perception and attitude in five Malaysian companies. Journal of Scientific and Industrial Research, 65 (12). pp. 970-976. ISSN 0022-4456

Abu Bakar, Anita (2006) Effects of Partial Esters on the Properties of Palm-Based Trimethylolpropane Esters. Masters thesis, Universiti Putra Malaysia.

Abu Khadra, Fayiz Y. M. (2006) Neural Network Model and Finite Element Simulation of Spring back in Plane-Strain Metallic Beam Bending. PhD thesis, Universiti Putra Malaysia.

Ahmad Hamarsheh, Mohammad Mahmoud Naji (2006) Development of a Dynamic Frequency Hopping Code System for Optical Code Division Multiple Access Communications. PhD thesis, Universiti Putra Malaysia.

Ahmad Khan, Imtiaz (2006) Prediction Modeling for Future Electrical Energy Demand in Malaysia. Masters thesis, Universiti Putra Malaysia.

Ahmad Shauri, Ruhizan Liza (2006) Optical Transmission-Based Water Turbidity Measurement System. Masters thesis, Universiti Putra Malaysia.

Ahmad Shauri, Ruhizan Liza and Wagiran, Rahman and S. B., Mohd Noor and Abdullah, Abdul Ghani Liew and Mohd Sidek, Roslina (2006) Optical-Transmission Based Water Turbidity Measurement System. In: Proceedings Seminar on Engineering and Technology 2006, 4-5 September 2006, Palm Garden Hotel, Putrajaya, Malaysia.

Ahmad Termida, Nursitihazlin (2006) The Fatality Index of Public Transport (Express Bus) in Malaysia. Masters project report, Universiti Putra Malaysia.

Ahmed Al- Wathaf, Ahmed Hasan (2006) Development of Finite Element Code for Non-Linear Analysis of Interlocking Mortarless Masonry System. PhD thesis, Universiti Putra Malaysia.

Al-Kaissi, Ahmed Wathik Naji (2006) Enhancement of the Optical Transmission System Utilizing a Dual-Function Remotely Pumped Erbium-Doped Fiber Amplifier. PhD thesis, Universiti Putra Malaysia.

Al-Qdah, Malik Taysir (2006) Optical Beat Interference in Optical Communication System. PhD thesis, Universiti Putra Malaysia.

Alhalali, Safoan M. O. (2006) THD Improvement for Variable Speed Drive Using Single Phase Multilevel Inverter. Masters thesis, Universiti Putra Malaysia.

Ali, Aidy and Brown, Mike W. and Rodopoulos, Chris A. and Gardiner, S. (2006) Characterization of 2024-T351 friction stir welding joints. Journal of Failure Analysis and Prevention, 6 (4). pp. 83-96. ISSN 1547-7029

Alias, Nor Azlina (2006) Development of a Bio-Composite Interlocking Block System for River Revetment. Masters thesis, Universiti Putra Malaysia.

Aljibori, Hakim S. Sultan (2006) Experimental Investigation and Finite Element Analysis of Composite Conical Structures Subjected to Slip Loading. PhD thesis, Universiti Putra Malaysia.

Alraziqi, Adel Ahmed (2006) Geotechnical Behavior Of Shell Footings. PhD thesis, Universiti Putra Malaysia.

Ariffin, Hidayah (2006) Bacterial Cellulase from a Local Isolate, Bacillus Pumilus EB3. Masters thesis, Universiti Putra Malaysia.

Ishak Aris (2006) An Apparatus for Treating Building Surfaces and The Like.

Aung, Min Min (2006) Effects of Crude Palm Oil on the Physico-Chemical Properties of Polyethylene Blown Film. Masters thesis, Universiti Putra Malaysia.

Awaludin, Noor Azita (2006) Analysis Of Thrust Density Calculation For Linear Dc Actuators. Masters thesis, Universiti Putra Malaysia.

Azhari, (2006) Synthesis Of Palm Biodiesel Using Direct Application Of Pure Sodium Methoxide As The Catalyst. Masters thesis, Universiti Putra Malaysia.

Bahrom, Samsul Imran (2006) Development of a Computer Programme for the Static Analysis of Jacket Offshore Structures Subjected to Wave and Current Loading. Masters thesis, Universiti Putra Malaysia.

Bashi, Senan Mahmod and Al-Abulaziz, A. U. M. and Mailah, Nashiren F. (2006) Effects of high power electronics converters on PLC signals. Journal of Applied Sciences, 6 (9). pp. 1888-1891. ISSN 1812-5654

Billa, Lawal (2006) Application of Hydro-Meteorological Model and GIS in Short Range Severe Flood Forecasting and Mapping. PhD thesis, Universiti Putra Malaysia.

Billa, Lawal and Mansor, Shattri and Mahmud, Ahmad Rodzi and Ghazali, Abdul Halim (2006) Modelling rainfall intensity from NOAA AVHRR data for operational flood forecasting in Malaysia. International Journal of Remote Sensing, 27 (23). 5225 -5234. ISSN 0143-1161

Billa, Lawal and Shattri, Mansor and Mahmud, Ahmad Rodzi and Ghazali, Abdul Halim (2006) Comprehensive planning and the role of SDSS in flood disaster management in Malaysia. Disaster Prevention and Management, 15 (2). pp. 233-240. ISSN 0965-3562

Bockari-Gevao, Sahr Marvin and Wan Ismail, Wan Ishak and Yahya, Azmi and Teh, Christopher Boon Sung (2006) A modified soil tilth index and its relationship with rice yield. ScienceAsia, 32 (1). pp. 25-30. ISSN 1513-1874

Chan, Chee Sheng (2006) Spatial Apparent Electrical Conductivity of Paddy Soil as an Indicator of Rice Productivity. PhD thesis, Universiti Putra Malaysia.

Chet, Ngo Chon (2006) Development of Commercial Vehicle Speed Warning System. Masters thesis, Universiti Putra Malaysia.

Chong, Fui Chin (2006) Production of Mono-and Diacylglycerols from the Esterification of Palm Oil Fatty Acid Distillate Catalyzed by Immobilized Rice Bran Lipase in a Packed Bed Reactor. Masters thesis, Universiti Putra Malaysia.

Daud, Mohd Razali (2006) Smart Vision System for Car Tire Condition Monitoring. Masters thesis, Universiti Putra Malaysia.

Dolah, Mohd Shahrizal (2006) Development of a New Jointing System for Open Plan Office System. Masters thesis, Universiti Putra Malaysia.

Ebrahimi, Mahdi and Sultan Aljibori, Hakim S. and Salem Hamouda, Abdel Magid and Omer, Ashraf Ali and Mokhtar, Ahmad Samsuri (2006) Experimental optimization of composite collapsible tubular energy absorber device. Thin-Walled Structures, 44 (11). 1201-1211 . ISSN 0263-8231

El-Harbawi, Mohanad M-A. (2006) Design and Development of an Integrated Chemical Accident System for Monitoring Risk Potential of Hazard Installation. PhD thesis, Universiti Putra Malaysia.

Gurusamy, Gobi (2006) Enhanced Ad Hoc On-Demand Distance Vector Routing Protocol For Mobile Ad Hoc Network Internet Connectivity. Masters thesis, Universiti Putra Malaysia.

Habaebi, Mohamed Hadi (2006) Macro/micro-mobility fast handover in hierarchical mobile IPv6. Computer Communications, 29 (5). pp. 611-617. ISSN 0140-3664

Haddud, Tarak Ali (2006) Design and Development of a Multi-Wavelength Brillouin/Erbium Long-Band Fabry Perot Fiber Laser. Masters thesis, Universiti Putra Malaysia.

Hamid, Hussain (2006) Development Of Capacity And Level-Of-Service For Uninterrupted Exclusive Motorcycle Lanes In Malaysia. PhD thesis, Universiti Putra Malaysia.

Hamid, Khairul Hamzani (2006) Development of GSM-Based Vehicle Anti-Theft System. Masters thesis, Universiti Putra Malaysia.

Hanafi, Marsyita (2006) Design and Development of Variable Fiber Optic Coupler. Masters thesis, Universiti Putra Malaysia.

Hasan Al-Qdah, Majdi Taysir (2006) Detection of Microcalcifications Using Wavelet Techniques in Mammogram Digital Images and Development of a Software for Evaluation of Radiologist Findings. PhD thesis, Universiti Putra Malaysia.

Hitam, Salasiah (2006) Improvement Of Free Space Optical Communications Using Double Carrier Modulation/Differential Detection. PhD thesis, Universiti Putra Malaysia.

Ibitoye, A. B. and Hamouda, Abdel Majid Saleem and Shaw, Voon Wong and Radin Sohadi, Radin Umar (2006) Simulation of motorcyclist's kinematics during impact with W-Beam guardrail. Advances in Engineering Software, 37 (1). pp. 56-61. ISSN 0965-9978

Azni Idris (2006) System and apparatus for the treatment of organic effluents.

Iqbal, Syed Javaid and Ahmad, M.H.B. and Salem, A.M. Ramzia (2006) Single laser light source multi-channel PSK optical communication. Journal of Applied Sciences, 6 (1). pp. 223-226. ISSN 1812-5654

Ishak, Asnor Muizan (2006) Relationship Between Runoff Coefficient and Curve Number for Sungai Weng and Sungai Kayu Ara Catchments. Masters thesis, Universiti Putra Malaysia.

Ishak, Ruhaizad (2006) Development Of Flywheel Inverter System For Voltage Sag Mitigation. Masters thesis, Universiti Putra Malaysia.

Jaafar, Mohd Saleh and Thanoon, Waleed Abdulmalik and Najm, Amad M. S. and Abdul Kadir, Mohd Razali and Abang Ali, Abang Abdullah (2006) Strength correlation between individual block, prism and basic wall panel for load bearing interlocking mortarless hollow block masonry. Construction and Building Materials, 20 (7). pp. 492-498. ISSN 0950-0618

Jabir, Amjad Najim (2006) Development of Iterative Minimum-Maximum Filter for Reducing Impulse Noise from Highly Corrupted Images. Masters thesis, Universiti Putra Malaysia.

Jacob, M. Suresh Devanesan (2006) Characterization Of Fretting Fatigue of 7075-T6 Aluminium Alloy. PhD thesis, Universiti Putra Malaysia.

Jafari, Seyed Mohammadbagher (2006) Critical Success Factors for the Implementation of Enterprise Resource Planning Systems in Malaysia. Masters thesis, Universiti Putra Malaysia.

Jahanshiri, Ebrahim (2006) Gis-Based Soil Sampling Methods for Precision Farming of Rice. Masters thesis, Universiti Putra Malaysia.

Jamaludin, Suhaimi (2006) Development of a Cut-Slope Stability Assessment System for Peninsular Malaysia. Masters thesis, Universiti Putra Malaysia.

Jayaprakash, J. (2006) Shear Strengthening of Reinforced Concrete Beams Using Externally Bonded Bi-Directional Carbon Fibre Reinforced Polymer. PhD thesis, Universiti Putra Malaysia.

Kanisin, Devaraj (2006) Theoretical Analysis On The Electrical Performance Of Long Coaxial Cable At Different Temperature. Masters thesis, Universiti Putra Malaysia.

Kim Huat, Bujang (2006) Deformation and Shear Strength Characteristics of Some Tropical Peat and Organic Soils. Pertanika Journal of Science & Technology, 14 (1 & 2). pp. 61-74. ISSN 0128-7680

Koh, Johnny Siaw Paw and Aris, Ishak and Ramachandaramurthy, Vigna Kumaran and Bashi, Sinan Mahmod and Marhaban, Mohd Hamiruce (2006) Design, development and performance optimization of a new artificial intelligent controlled multiple-beam optical scanning module. Journal of Applied Sciences, 6 (10). pp. 2201-2208. ISSN 1812-5654

Krishnan, Vijayaraghavan and Ahmad, Desa and Ibrahim, Mohd Khairil and Herman, Haryati Naemmah (2006) Isolation of hydrogen generating microflora from cow dung for seeding anaerobic digester. International Journal of Hydrogen Energy, 31 (6). pp. 708-720. ISSN 0360-3199

Kumoro, Andri Cahyo and Hasan, M. (2006) Modeling of Supercritical Carbon Dioxide Extraction of Andrographolide from Andrographis Paniculata Leaves by Employing Integral Desorption Concept. In: Proceedings Seminar on Engineering and Technology 2006, 4-5 September 2006, Palm Garden Hotel, Putrajaya, Malaysia.

Laseima, Saleh Yhya (2006) Structural Behavior of Ferrocement-Autoclave Block Composite Slab. Masters thesis, Universiti Putra Malaysia .

Lim, Kok Jeng (2006) Stiffness and Strength of a Modified External Skeletal Fixator for Orthopaedic Treatment of Animals. Masters thesis, Universiti Putra Malaysia.

Lim, Ying Pio (2006) Effects of Grain Refinement on The Cooling Rate, and Microstructural and Mechanical Properties of Al-Si Sand Castings. PhD thesis, Universiti Putra Malaysia.

Loo, Woon Chek (2006) Ergonomic Considerations for Assembly and Disassembaly of Cng Tanks on a Vehicle. Masters thesis, Universiti Putra Malaysia.

Look, Kar Yang (2006) Theory and Simulation of Incipient Instability in Gas-Solid Fluidization. Masters thesis, Universiti Putra Malaysia.

M., Saleem and A. H., Sadiyal and Prasetyo, Edi and P. R., Arora (2006) Evolutionarily stable strategies for defensive switching. Applied Mathematics and Computation, 117 (2). pp. 697-713. ISSN 0096-3003

M. Qudsieh, Isam Yassin (2006) Synthesis, Characterization and Application of Polyacrylamide Grafted Sago Strach for Coagulation and Flocculation Processes. PhD thesis, Universiti Putra Malaysia.

Mahdi Ahmad Saad, Elsadig and Mokhtar, Ahmad Samsuri and Asari, N. A. and Elfaki, Faiz. A. M. and Abdullah, E. J. (2006) Nonlinear finite element analysis of axially crushed cotton fibre composite corrugated tubes. Composite Structures, 75 (1-4). pp. 39-48. ISSN 0263-8223

Mansor, Hasmah (2006) Fuzzy Control of Continuous Stirred Tank Reactor. Masters thesis, Universiti Putra Malaysia.

Mat Said, Aini (2006) Development and Application of a Malaysian Socio-Technical Disaster Model. PhD thesis, Universiti Putra Malaysia.

Mat Said, Aini (2006) Malaysian Socio-Technical Disaster Model and Learning System. PhD thesis, Universiti Putra Malaysia.

Md Tohit, Khairul Nizam (2006) Improvement of Accuracy Level of Automotive Front Fender Shield Assembly Using Process Failure Mode and Effect Analysis and Control Plan Techniques. Masters thesis, Universiti Putra Malaysia.

Md. Tomari, Mohd Razali (2006) Detection and Classification of Moving Objects for an Automated Surveillance System. Masters thesis, Universiti Putra Malaysia.

Md. Yasin, Faizah (2006) Production of Carbon Nanotubes for Gas Sensor Application. Masters thesis, Universiti Putra Malaysia.

Mohamed, Harimi (2006) Application of Theoretical Combustion Analysis in Determining the Optimum Fibre/Shell Ratio for Oil Mill Boiler. PhD thesis, Universiti Putra Malaysia.

Mohamed, Mustafa Yousif (2006) A Methodology for Assessing The Impact of Landuse Changes on Watershed Runoff. PhD thesis, Universiti Putra Malaysia.

Mohamed @ Mahmood, Masniza (2006) The Influence Of M13 Bacteriophage On Protein Adsorption Using Anion Exchange Expanded Bed Chromatography. Masters thesis, Universiti Putra Malaysia.

Mohamed Khmag, Asem Ib. (2006) Modified Data Encryption Standard Algorithm for Textbased Applications. Masters thesis, Universiti Putra Malaysia.

Mohammad, Karimadini (2006) Development of a Crisp Fuzzy-Like Controller Using Formula-Based and Vectorized Approaches. Masters thesis, Universiti Putra Malaysia.

Mohammad, Musli (2006) Strategies for Implementing Integrated Management System in the Malaysian Manufacturing Companies. Masters thesis, Universiti Putra Malaysia.

Mohammed Khalid, Muhammad Nazir (2006) Deterministic Automatic Test Pattern Generation for Built-In Self Test System. Masters thesis, Universiti Putra Malaysia.

Mohd Jakarni, Fauzan (2006) Properties of Stone Mastic Asphalt Slabs Compacted Using a Newly Developed Roller Compactor. Masters thesis, Universiti Putra Malaysia.

Mohd Junusi, Riduan (2006) Spatial Variability of Oil Palm Leaf Nutrients and Yield. Masters thesis, Universiti Putra Malaysia.

Mohd Saad, Norhafidzah (2006) Characteristics and Absorption Coefficient of Co2 Laser in Natural Gas Mixtures. Masters thesis, Universiti Putra Malaysia.

Mohd Yusoff, Mohd Faudzi (2006) Valuation of Fatal and Non-Fatal Injuries Due to Motorcycle Accidents in Malaysia. PhD thesis, Universiti Putra Malaysia.

Moloud Abufela, Basm Altaher (2006) Development of Laser Range Finder Using 1550 nm Wavelength. Masters thesis, Universiti Putra Malaysia.

Muhamad Halil, Faridah (2006) Contractor’s Perception of the Use of Statistical Approach in the Tender Process at the Public Works Department, Malaysia. Masters thesis, Universiti Putra Malaysia.

Muhammad, Muhammad (2006) Equilibrium and Kinetics of Cadmium and Zinc Adsorption on Activated Carbon from Palm Kernel Shell. Masters thesis, Universiti Putra Malaysia.

Muhammad Noor, Ahmad Shukri (2006) Design and Development of a Dual-Core Erbium Doped Amplifier for Polarization-multiplexed Signals. Masters thesis, Universiti Putra Malaysia.

Mustafa, Intan Shafinaz (2006) Fingerprint Image Watermarking Using Encrypted Identification Number. Masters thesis, Universiti Putra Malaysia.

Mustapa Kamal, Siti Mazlina and Webb, C. and Hussain, Siti Aslina (2006) Comparison of Energy Consumption between Recycle and Conventional Process of Flour Milling: At Break System. In: Proceedings Seminar on Engineering and Technology 2006, 4-5 September 2006, Palm Garden Hotel, Putrajaya, Malaysia.

Mutasher, Saad A. (2006) Evaluation of Mechanical Properties of Hybrid Aluminium/Fiber-Reinforced Composites. PhD thesis, Universiti Putra Malaysia.

N.A., Abdul Jalil (2006) Mathematical Models for the Apparent Mass of the Seated Person Exposed to Fore-And-Aft Vibration. In: Proceedings Seminar on Engineering and Technology 2006, 4-5 September 2006, Palm Garden Hotel, Putrajaya, Malaysia.

Na'mi, Saleem (2006) Finite Element Analysis Of Hydraulic Bulging Of Metal Tubes. Masters thesis, Universiti Putra Malaysia.

Naghshineh, Ali (2006) Finite Element Analysis of Cooling Tower Foundation Under Wind Load. Masters thesis, Universiti Putra Malaysia.

Natsheh, Essam Fathi (2006) Performance Enhancement of Routing Protocols in Mobile Wireless Ad-Hoc Networks Using Fuzzy Reasoning Algorithm. PhD thesis, Universiti Putra Malaysia.

Ng, Chew Hee and Ong, Han Kiat Alan and Kong, Chiak Wu and Tan, Kong Wai and Raja Abdul Rahman, Raja Noor Zaliha and Mohd Yamin, Bohari and Ng, Seik Weng (2006) Factors affecting the nucleolytic cleavage of DNA by (N,N′-ethylenendiaminediacetato)metal(II) complexes, M(edda). Crystal structure of Co(edda). Polyhedron, 25 (16). pp. 3118-3126. ISSN 0277-5387

Ng, Eng Boon (2006) Determination of Energy Requirements for Dry Land Tillage Using Spatial Variability Technique. Masters thesis, Universiti Putra Malaysia.

Ng, Roger Cheng Yong (2006) Quality Of Service Provisioning Scheme For Real-Time Applications in IEEE 802.11 Wireless Local Area Network. Masters thesis, Universiti Putra Malaysia.

Ng, Shu Chin (2006) Coagulation Performance of Moringa Oleifera Seeds Stored Under Different Preservation Conditions. Masters thesis, Universiti Putra Malaysia.

Ng, Sook Kuen (2006) Characteristics and Efficiency of Bleaching Clays in the Physical Refining of Palm Oil. Masters thesis, Universiti Putra Malaysia.

Nik Mohamed, Nik Mohd Zuki (2006) An Improved Method to Reduce Development Time for New Models of Proton. Masters thesis, Universiti Putra Malaysia.

Nissirat, Liyth Ahmad (2006) Development of Inductive Quarter Wave Radio Frequency Coaxial Resonant Cavity for a Compressed Natural Gas Ignition. Masters thesis, Universiti Putra Malaysia.

Noordin, Nor Kamariah (2006) A Scheme For Space-Time-Frequency Coding And Adaptive Multiple Antenna Selection For Improving The Performance Of Multiple-Input Single-Output Ofdm System. PhD thesis, Universiti Putra Malaysia.

Noorzaei, Jamaloddin and Bayagoob, Khaled Hamood and Thanoon, Waleed Abdulmalik and Jaafar, Mohd Saleh (2006) Thermal and stress analysis of Kinta RCC dam. Engineering Structures, 28 (13). pp. 1795-1802. ISSN 0141-0296

Noorzaei, Jamaloddin and Naghshineh, Ali and Abdul Kadir, Mohd Razali and Thanoon, Waleed Abdulmalik and Jaafar, Mohd Saleh (2006) Nonlinear interactive analysis of cooling tower–foundation–soil interaction under unsymmetrical wind load. Thin Walled Structures, 44 (9). pp. 997-1005. ISSN 0263-8231

Omar, Rozita and Abdullah, M. A. and Hasan, M. A. and Mohammad, Rosfarizan and Mahmood, Maziah (2006) Kinetics and modelling of cell growth and substrate uptake in Centella asiatica cell culture. Biotechnology and Bioprocess Engineering, 11 (3). pp. 223-229. ISSN 1226-8372

Ooi, Wei Han (2006) Development of a Mobile Robot Spatial Data Acquisition System. Masters thesis, Universiti Putra Malaysia.

Othman, Mohammad Lutfi and Aris, Ishak and Mariun, Norman and Sahbudin, Ratna Kalos Zakiah (2006) Knowledge-based power system protection design courseware. Journal of Applied Sciences, 6 (15). pp. 2963-2977. ISSN 1812-5654

Oyop, Siti Mastura (2006) Compliance Audit of Safety, Health, Environment and Services at Selected Ecotourism Sites in Malaysia. Masters thesis, Universiti Putra Malaysia.

Pradhan, Biswajeet (2006) Compression of Three-Dimensional Terrain Data Using Lifting Scheme Based on Second Generation Wavelets. PhD thesis, Universiti Putra Malaysia.

Razalli, Mohammad Shahrazel (2006) Design and Development of a Wireless Radio Frequency Identification Reader Communication System at UHF Band. Masters thesis, Universiti Putra Malaysia.

Renuganth, Varatharajoo (2006) Hybrid spacecraft attitude control systems. In: Multiphysics 2006, 14-15 Dec 2006, Maribor,Slovenia.

Rezaei, Fateme (2006) Development of Short Carbon Fibre Reinforced Polypropylene Composite for Car Bonnet. Masters thesis, Universiti Putra Malaysia.

Rusnam, (2006) Development of Non-Point Source Pollution Model for Maize Cultivation Under Tropical Condition. PhD thesis, Universiti Putra Malaysia.

Saharudin, Suhairi (2006) Development and Characterization of Multi-Wavelength Fiber Laser Light Sources Based on Erbium and Brillouin Gain. PhD thesis, Universiti Putra Malaysia.

Salih Al-Badri, Qussay Abbas (2006) Tumor Extraction for Brain Magnetic Resonance Imaging Using Modified Gaussian Distribution. PhD thesis, Universiti Putra Malaysia.

Salit, Mohd Sapuan (2006) Using the morphological chart technique for the design of polymeric-based composite automotive pedals. Discovery and Innovation, 18 (4). pp. 311-317. ISSN 1015-079X

Salit, Mohd Sapuan and A, Leenie and Mohamed, Harimi and Yeo, Kay Beng (2006) Mechanical properties of woven banana fibre reinforced epoxy composites. Materials & Design, 27 (8). pp. 689-693. ISSN 0264-1275

Samsu Baharuddin, Azhari (2006) Cellulase Production by a Locally Isolated Fungal Strain Grown on Oil Palm Empty Fruit Bunch. Masters thesis, Universiti Putra Malaysia.

Sanbasivam, Sivasankar (2006) Development of an Internet–Based System to Measure Thermal Comfort in Indoor Environments. Masters thesis, Universiti Putra Malaysia.

Sarkar, Md. Abdul Mannan (2006) Biodewaterability and Liquid State Bioconversion of Activated Sludge Under Non-Sterilized Conditions. Masters thesis, Universiti Putra Malaysia.

Seyed Hakim, Seyed Jamalaldin (2006) Development and Applications of Artificial Neural Network for Prediction of Ultimate Bearing Capacity of Soil and Compressive Strength of Concrete. Masters thesis, Universiti Putra Malaysia.

Shaari, Ahmad Zaki (2006) Analysis and Fabrication of Fused Fiber Optic Couplers for Communication Systems. Masters thesis, Universiti Putra Malaysia.

Shaluf, Ibrahim Mohamed and Ahamadun, Fakhru'l-Razi (2006) Technological disaster prevention – the case of Malaysia. Disaster Prevention and Management, 15 (5). pp. 783-792. ISSN 0965-3562

Shaluf, Ibrahim Mohamed and Ahamadun, Fakhru'l-Razi (2006) Technological emergencies expert system (TEES). Disaster Prevention and Management, 15 (3). pp. 414-424. ISSN 0965-3562

Shaluf, Ibrahim Mohamed and Ahmadun, Fakhru'l-Razi (2006) Disaster types in Malaysia: an overview. Disaster Prevention and Management, 15 (2). pp. 286-298. ISSN 0965-3562

Shariff, Abdul Rashid Mohamed (2006) ISO certified biological and agricultural engineering tertiary. International Journal of Engineering Education, 22 (6). pp. 1182-1188. ISSN 0949-149X

Sheikh Abdul Kadir, Ibrahim (2006) Modeling Mode Choice Behavior of Motorcyclists in Malaysia. PhD thesis, Universiti Putra Malaysia.

Siew, Fong Wah (2006) Theory and Simulation of the Onsets of Convection Induced by Liquid Diffusion in Liquid and Incipient Instability Caused by Liquid Now in Particle Bed. Masters thesis, Universiti Putra Malaysia.

Silvarajah, Deepalaxmi (2006) Performance Evaluation of Phorizon and Pjet_Veot Reservation Schemes for Optical Burst Switching. Masters thesis, Universiti Putra Malaysia.

Soin, Nor Hayati and Majlis, Burhanuddin Yeop (2006) Kajian Mengenai Kebersandaran Pembentukan Keadaan Potong Bawah Penjuru Terhadap Jenis Larutan Pemunar dalam Penghasilan Diafram Beralun Silikon. Pertanika Journal of Science & Technology, 14 (1 & 2). pp. 41-52. ISSN 0128-7680

Subramaniam, Jeevan Rao (2006) Enhancement of Space-Time Receiver Structure with Multiuser Detection for Wideband CDMA Communication Systems. Masters thesis, Universiti Putra Malaysia.

Sulaiman, Siti Zubaidah (2006) Batch Production of Trimethylolpropane Ester From Palm Oil as Lubricant Basestock. Masters thesis, Universiti Putra Malaysia.

Syed Nor Azlan, Syarifah Ezdiani (2006) Bandwidth Performance Analysis of a Remote Monitoring Surveillance System. Masters thesis, Universiti Putra Malaysia.

Syed Shaharuddin, Sharifah Imihezri and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Megat Ahmad, Megat Mohamad Hamdan and Zainuddin, Edi Syams and Osman, Mohd Rasid and Abdul Rahman, Mohd Zaki (2006) Mould flow and component design analysis of polymeric based composite automotive clutch pedals. Journal of Materials Processing Technology, 171 (3). pp. 358-365. ISSN 0924-0136

Tan, S.K. and Wong, Shaw Voon and Radin Sohadi, Radin Umar and Hamouda, Abdel Majid and Megat Ahmad, Megat Mohamad Hamdan (2006) Experimental study on energy absorption characteristics of motorcycle front wheel—tyre assembly in frontal impact. International Journal of Crashworthiness, 11 (2). pp. 131-142. ISSN 1358-8265

Tan, Yan Peng and Tau, Chuan Ling and Tan, Wen Siang and Yusoff, Khatijah and Tey, Beng Ti (2006) Purification of recombinant nucleocapsid protein of Newcastle disease virus from unclarified feedstock using expanded bed adsorption chromatography. Protein Expression and Purification, 46 (1). pp. 114-121. ISSN 1046-5928

Tan, Yan Peng and Tau, Chuan Ling and Tan, Wen Siang and Yusoff, Khatijah and Tey, Beng Ti (2006) Recovery of histidine-tagged nucleocapsid protein of Newcastle disease virus using immobilised metal affinity chromatography. Process Biochemistry, 41 (4). pp. 874-881. ISSN 0032-9592

Teck, Teh Kian (2006) Development of a Road Construction Material Selection System. Masters thesis, Universiti Putra Malaysia.

Vijayaraghavan, Krishnan and Ahmad, Desa and Ibrahim, Mohd Khairil (2006) Biohydrogen generation from jackfruit peel using anaerobic contact filter. International Journal of Hydrogen Energy, 31 (5). pp. 569-579. ISSN 0360-3199

Vijayaram, Thoguluva Raghavan (2006) Properties of Metal Matrix Composite of Aluminium 11.8% Silicon Reinforced with Different Particulates. PhD thesis, Universiti Putra Malaysia.

Wan Adnan, Wan Azinun and Abdul Karim, S. and Hitam, Salasiah (2006) Multilevel Wavelet Decomposition Watermarking Techniques. In: Proceedings Seminar on Engineering and Technology 2006, 4-5 September 2006, Palm Garden Hotel, Putrajaya, Malaysia.

Wan Hasan, Wan Hafiza (2006) Peak to Average Power Ratio Reduction Using the Clipping Technique in Orthogonal Frequency Division Multiplexing System. Masters thesis, Universiti Putra Malaysia.

Wan Zaki, Wan Suhaimizan (2006) Design and Fabrication of Batio3 Humidity Sensor Using Thick Film Screen Printing Technique. Masters thesis, Universiti Putra Malaysia.

Wong, Lee Ing (2006) Dispersion of Particulate Matter from Palm Oil Refinery Mill. Masters thesis, Universiti Putra Malaysia.

Wong Shaw Voon (2006) Pendulum impact test rig.

Yap, Yoke Kin (2006) Development of a Rice Combine Harvester Instrumentation System for Mapping of Crop Yield and Field Performance. Masters thesis, Universiti Putra Malaysia.

Yeat, Chooi Fong (2006) The Effect of Thin-Layer Elements in Structural Modeling of Rail-Track Supporting System. Masters thesis, Universiti Putra Malaysia .

Yong, Chu Eu (2006) Micro-Mobility Enhancement in Multicast Mobile Ipv6 Wireless Networks. Masters thesis, Universiti Putra Malaysia.

Zahi, Souilah and Hashim, Mansor and Daud, Abdul Razak (2006) Preparation of Ni–Zn–Cu ferrite particles by sol–gel technique. Materials Letters, 60 (23). pp. 2803-2806. ISSN 0167-577X

Zainal Abidin @ Murad, Sumaiya (2006) Solvent Crystallization of Palm-Based Dihydroxystearic Acid. Masters thesis, Universiti Putra Malaysia.

Zakaria, Fiona (2006) Effects Of Hydraulic Loading Rates On Sewage Treatment Efficiency Of Constructed Wetlands. Masters thesis, Universiti Putra Malaysia.

Zulkifli, Shamsul Aizam (2006) Simulation of Linear Feedback Control of D-Statcom for Voltage Sag Mitigation. Masters thesis, Universiti Putra Malaysia.

This list was generated on Sat May 25 15:10:32 2013 MYT.

Universiti Putra Malaysia Institutional Repository

Universiti Putra Malaysia Institutional Repository is an on-line digital archive that serves as a central collection and storage of scientific information and research at the Universiti Putra Malaysia.

Currently, the collections deposited in the IR consists of Master and PhD theses, Master and PhD Project Report, Journal Articles, Journal Bulletins, Conference Papers, UPM News, Newspaper Cuttings, Patents and Inaugural Lectures.

As the policy of the university does not permit users to view thesis in full text, access is only given to the first 24 pages only.