Browse by Journal Title

Rani, M. S. A. and Norrrahim, M. N. F. and Knight, V. F. and Nurazzi, N. M. and Abdan, K. and Lee, S. H. (2023) A review of solid-state proton polymer batteries: materials and characterizations. Polymers, 15 (19). art. no. 4032. pp. 4032-29. ISSN 2073-4360

Khoo, Pui San and Ilyas, R. A. and Uda, M. N. A. and Abu Hassan, Shukur and Nordin, A. H. and A. S., Norfarhana and Ab Hamid, N. H. and A. Rani, M. S. and Abral, Hairul and Norrrahim, M. N. F. and Knight, V. F. and Lee, Chuan Li and S., Ayu Rafiqah (2023) Starch-based polymer materials as advanced adsorbents for sustainable water treatment: current status, challenges, and future perspectives. Polymers, 15 (14). art. no. 3114. pp. 1-31. ISSN 2073-4360

Gunny, Ahmad Anas Nagoor and Leem, Siew Juan and Makhtar, Muaz Mohd Zaini and Zainuddin, Nor’izzah and Mohd Roslim, Muhammad Huzaifah and Raja Hashim, Raja Hasnida and Pusphanathan, Kavita and Siddiqui, Masoom Raza and Alam, Mahboob and Rafatullah, Mohd (2023) The use of essential oil embedded in polylactic acid/chitosan-based film for mango post-harvest application against pathogenic fungi. Polymers, 15 (12). art. no. 2722. pp. 1-14. ISSN 2073-4360

Hasanah, Nur Nabilah and Mohamad Azman, Ezzat Mohamad and Rozzamri, Ashari and Zainal Abedin, Nur Hanani Zainal and Ismail-Fitry, Mohammad Rashedi (2023) A systematic review of butterfly pea flower (Clitoria ternatea L.): extraction and application as food freshness pH-indicator for polymer-based intelligent packaging. Polymers, 15 (11). art. no. 2541. pp. 1-20. ISSN 2073-4360

Ayu Rafiqah, S. and Nur Diyana, A. F. and Abdan, Khalina and Sapuan, S. M. (2023) Effect of alkaline treatment on mechanical and thermal properties of miswak (Salvadora persica) fiber reinforced polylactic acid. Polymers, 15 (9). art. no. 2228. pp. 1-16. ISSN 2073-4360

Yusri, M. A. H. M. and Zuhri, M. Y. M. and Ishak, M. R. and Azman, M. A. (2023) The capabilities of honeycomb core structures made of kenaf/polylactic acid composite under compression loading. Polymers, 15 (9). art. no. 2179. pp. 1-13. ISSN 2073-4360

Alresheedi, Mohammed Thamer and Elsafi, Mohamed and Aladadi, Yosef T. and Abas, Ahmad Fauzi and Ganam, Abdullrahman and Sayyed, M. I. and Mahdi, Mohd Adzir (2023) Assessment of silicone rubber/lead oxide composites enriched with Bi2O3, WO3, BaO, and SnO2 nanoparticles for radiation shielding applications. Polymers, 15 (9). art. no. 2160. pp. 1-13. ISSN 2073-4360

Rajan, Kavitha and Omar, Latifah and Ahmed, Osumanu Haruna and Charles, Primus Walter and Kasim, Susilawati (2023) Potential of rejected sago starch as a coating material for urea encapsulation. Polymers, 15 (8). art. no. 1863. pp. 1-17. ISSN 2073-4360

Tang, Pui Mun and Habib, Syahir and Abd Shukor, Mohd Yunus and Alias, Siti Aisyah and Smykla, Jerzy and Yasid, Nur Adeela (2023) Evaluation of the deterioration of untreated commercial polystyrene by psychrotrophic antarctic bacterium. Polymers, 15 (8). pp. 1841-1855. ISSN 2073-4360

Amerhaider Nuar, Nurul Nazihah and Md. Jamil, Siti Nurul Ain and Choong, Thomas Shean Yaw and Mat Azmi, Intan Diana and Abdul Romli, Nor Athirah and Abdullah, Luqman Chuah and Chiang, Pen-Chi and Li, Fan (2023) Synthesis of calcium peroxide nanoparticles with starch as a stabilizer for the degradation of organic dye in an aqueous solution. Polymers, 15 (5). art. no. 1327. pp. 1-19. ISSN 2073-4360

Li, Fan and Choong, Thomas Shean Yaw and Abdullah, Luqman Chuah and Md. Jamil, Siti Nurul Ain and Amerhaider Nuar, Nurul Nazihah (2023) Effective removal of glyphosate from aqueous systems using synthesized PEG-coated calcium peroxide nanoparticles: kinetics study, H2O2 release performance and degradation pathways. Polymers, 15 (3). art. no. 775. pp. 1-17. ISSN 2073-4360

Shazleen, Siti Shazra and Sabaruddin, Fatimah Athiyah and Ando, Yoshito and Ariffin, Hidayah (2023) Optimization of cellulose nanofiber loading and processing conditions during melt extrusion of poly(3-hydroxybutyrateco-3-hydroxyhexanoate) bionanocomposites. Polymers, 15 (3). art. no. 671. pp. 1-15. ISSN 2073-4360

Radzi, A. M. and Zaki, Sheikh and Hassan, Mohamad Zaki and Ilyas, R. A. and Jamaludin, Khairur Rijal and Md Daud, Mohd Yusof and Abdul Aziz, Sa’ardin (2023) Bamboo-fiber-reinforced thermoset and thermoplastic polymer composites: a review of properties, fabrication, and potential applications. Polymers, 14 (7). pp. 1-21. ISSN 2073-4360

Al-Shalawi, Faisal Dakhelallah and Mohamed Ariff, Azmah Hanim and Jung, Dong-Won and Mohd Ariffin, Mohd Khairol Anuar and Seng Kim, Collin Looi and Brabazon, Dermot and Al-Osaimi, Maha Obaid (2023) Biomaterials as implants in the orthopedic field for regenerative medicine: metal versus synthetic polymers. Polymers, 15 (12). pp. 1-31. ISSN 2073-4360

Siew, Xian Chin and Kam, Sheng Lau and Ginting, Riski Titian and Sin, Tee Tan and Poi, Sim Khiewcc and Chin, Hua Chia and Wongchoosuk, Chatchawal (2023) Facile preparation of carbon nanotubes/cellulose nanofibrils/manganese dioxide nanowires electrode for improved solid-sate supercapacitor performances. Polymers, 15 (18). art. no. 3758. pp. 1-13. ISSN 2073-4360

Kah, Yen Lim and Tengku Yasim-Anuar, Tengku Arisyah and Sharip, Nur Sharmila and Aziz Ujang, Farhana and Husin, Hazwani and Ariffin, Hidayah and Md Tahir, Paridah and Xinping, Li and Seng, Hua Lee and Yusof, Mohd Termizi (2023) Green phenolic resins from oil palm Empty Fruit Bunch (EFB) phenolated lignin and bio-oil as phenol substitutes for bonding plywood. Polymers, 15 (5). art. no. 1258. pp. 1-17. ISSN 1542-2119; ESSN: 1542-2127

Mohd. Johan, Ummie Umaiera and Raja Abd. Rahman, Raja Noor Zaliha and Ahmad Kamarudin, Nor Hafizah and Latip, Wahhida and Mohamad Ali, Mohd Shukuri (2023) Immobilization of hyperthermostable carboxylesterase EstD9 from Anoxybacillus geothermalis D9 onto Polymer material and its physicochemical properties. Polymers, 15 (6). art. no. 1361. pp. 1-18. ISSN 2073-4360

Hamat, Sanusi and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Yidris, Noorfaizal and Showkat Ali, Syamir Alihan and Hussin, Mohd Sabri and Abdul Manan, Muhamad Saifuldin and Ahamad Suffin, Muhamad Qauyum Zawawi and Ibrahim, Maliki and Mohd Khalil, Ahmad Nabil (2023) The effects of self-polymerized polydopamine coating on mechanical properties of polylactic acid (PLA)–kenaf fiber (KF) in fused deposition modeling (FDM). Polymers, 15 (11). pp. 1-20. ISSN 2073-4360

Rahmadiawan, Dieter and Abral, Hairul and Kotodeli, Rafi Alzues and Sugiarti, Eni and Muslimin, Ahmad Novi and Admi, Ratna Isnanita and Arafat, Andril and Kim, Hyun-Joong and Sapuan, S. M. and Kosasih, Engkos Achmad (2023) A novel highly conductive, transparent, and strong pure-cellulose film from TEMPO-oxidized bacterial cellulose by increasing sonication power. Polymers, 15 (3). pp. 1-16. ISSN 2073-4360

Mohammed, Abdulrahman A. B. A. and Hasan, Zaimah and Omran, Abdoulhdi A. Borhana and Elfaghi, Abdulhafid M. and Khattak, M.A. and Ilyas, R. A. and Sapuan, S. M. (2022) Effect of various plasticizers in different concentrations on physical, thermal, mechanical, and structural properties of wheat starch-based films. Polymers, 15 (1). art. no. 63. pp. 1-20. ISSN 2073-4360

Azadeh, Elham and Abdullah, Ummi Hani and Md Ali, Nurul Basirah and Pizzi, Antonio and Gerardin-Charbonnier, Christine and Gerardin, Philippe and Samiun, Wan Sarah and Ashari, Siti Efliza (2022) Development of water repellent, non-friable tannin-furanic-fatty acids biofoams. Polymers, 14 (22). art. no. 5025. pp. 1-20. ISSN 2073-4360

Kuan, Hoo Tien Nicholas and Tan, Ming Yee and Hassan, Mohamad Zaki and Mohd Zuhri, Mohamed Yusoff (2022) Evaluation of physico-mechanical properties on oil extracted ground coffee waste reinforced polyethylene composite. Polymers, 14 (21). art. no. 4678. pp. 1-16. ISSN 2073-4360

Lee, Chuan Li and Chin, Kit Ling and H’ng, Paik San and Hafizuddin, Mohd Sahfani and Khoo, Pui San (2022) Valorisation of underutilized grass fibre (stem) as a potential material for paper production. Polymers, 14 (23). art. no. 5203. pp. 1-18. ISSN 2073-4360; ESSN: 2073-4360

Katibi, Kamil Kayode and Yunos, Khairul Faezah and Che Man, Hasfalina and Aris, Ahmad Zaharin and Mohd Nor, Mohd Zuhair and Azis, Rabaah Syahidah (2022) An insight into a sustainable removal of bisphenol a from aqueous solution by novel palm kernel shell magnetically induced biochar: synthesis, characterization, kinetic, and thermodynamic studies. Polymers, 13 (21). art. no. 3781. pp. 1-30. ISSN 2073-4360

Basri, Rose Syuhada and Raja Abd. Rahman, Raja Noor Zaliha and Ahmad Kamarudin, Nor Hafizah and Latip, Wahhida and Mohamad Ali, Mohd Shukuri (2022) Characterization of carboxylic acid reductase from Mycobacterium phlei immobilized onto Seplite LX120. Polymers, 14 (20). art. no. 4375. pp. 1-19. ISSN 2073-4360

Ilyas, R. A. and Sapuan, S. M. and Bayraktar, Emin (2022) Bio and synthetic based polymer composite materials. Polymers, 14 (18). art. no. 3778. pp. 1-5. ISSN 2073-4360

Ilyas, R. A. and Salit, Mohd Sapuan and Bayraktar, Emin and Abu Hassan, Shukur and Hayeemasae, Nabil and M. S. N., Atikah and Shaker, Khubab (2022) Fiber-reinforced polymer composites: mechanical properties and applications. Polymers, 14 (18). art. no. 3732. pp. 1-16. ISSN 2073-4360

Kamarudin, Siti Hasnah and Mohd Basri, Mohd Salahuddin and Rayung, Marwah and Abu, Falah and Ahmad, So’bah and Norizan, Mohd Nurazzi and Osman, Syaiful and Sarifuddin, Norshahida and Mat Desa, Mohd Shaiful Zaidi and Abdullah, Ummi Hani and Mohamed Amin Tawakkal, Intan Syafinaz and Abdullah, Luqman Chuah (2022) A review on natural fiber reinforced polymer composites (NFRPC) for sustainable industrial applications. Polymers, 14 (17). art. no. 3698. pp. 1-36. ISSN 2073-4360

Ilyas, R. A. and Sapuan, S. M. and Bayraktar, Emin (2022) Current progress in biopolymer-based bionanocomposites and hybrid materials. Polymers, 14 (17). art. no. 3479. pp. 1-5. ISSN 2073-4360

Harun, Nur Haninah and Zainal Abidin, Zurina and Majid, Umar Adam and Abdul Hamid, Mohamad Rezi and Abdullah, Abdul Halim and Othaman, Rizafizah and Harun, Mohd Yusof (2022) Adopting sustainable Jatropha oil bio-based polymer membranes as alternatives for environmental remediation. Polymers, 14 (16). art. no. 3325. pp. 1-19. ISSN 2073-4360

Iswanto, Apri Heri and Madyaratri, Elvara Windra and Hutabarat, Nicko Septuari and Zunaedi, Eka Rahman and Darwis, Atmawi and Hidayat, Wahyu and Susilowati, Arida and Adi, Danang Sudarwoko and Lubis, Muhammad Adly Rahandi and Sucipto, Tito and Fatriasari, Widya and Antov, Petar and Savov, Viktor and Lee, Seng Hua (2022) Chemical, physical, and mechanical properties of belangke bamboo (Gigantochloa pruriens) and its application as a reinforcing material in particleboard manufacturing. Polymers, 14 (15). art. no. 3111. pp. 1-25. ISSN 2073-4360

Zolkepli, Husna and Widodo, Riyanto Teguh and Syed Mahmood and Salim, Norazlinaliza and Awang, Khalijah and Ahmad, Noraini and Othman, Rozana (2022) A review on the delivery of plant-based antidiabetic agents using nanocarriers: current status and their role in combatting hyperglycaemia. Polymers, 14 (15). art. no. 2991. pp. 1-24. ISSN 2073-4360

Aminatun and Rifqha Huriah and Dyah Hikmawati and Hadi, Sofijan and Tahta Amrillah and Che Abdullah, Che Azurahanim (2022) Nanofiber scaffold based on polylactic acid-polycaprolactone for anterior cruciate ligament injury. Polymers, 14 (15). art. no. 2983. pp. 1-13. ISSN 2073-4360

Ashfaq, Aamna and Nadeem, Raziya and Gong, Hongyu and Rashid, Umer and Saima Noreen and Rehman, Shafique ur and Ahmed, Zubair and Adil, Muhammad and Akhtar, Nayab and Ashfaq, Muhammad Zeeshan and Alharthi, Fahad A. and Kazerooni, Elham Ahmed (2022) Fabrication of novel agrowaste (banana and potato peels)-based biochar/TiO2 nanocomposite for adsorption of Cr(VI), statistical optimization via RSM approach. Polymers, 14 (13). art. no. 2644. pp. 1-20. ISSN 2073-4360

Abdullah, Mohd Na’im and Mustapha, Faizal and Ahmad, Kamarul Arifin and Mustapha, Mazlina and Khan, Tabrej and Singh, Balbir and Sebaey, Tamer A. (2022) Effect of different pre-treatment on the microstructure and intumescent properties of rice husk ash-based geopolymer hybrid coating. Polymers, 14 (11). art. no. 2252. pp. 1-18. ISSN 2073-4360

Lubis, Muhammad Adly Rahandi and Handika, Sucia Okta and Rita Kartika Sari and Iswanto, Apri Heri and Antov, Petar and Kristak, Lubos and Lee, Seng Hua and Pizzi, Antonio (2022) Modification of Rrmie fiber via impregnation with low viscosity bio-polyurethane resins derived from lignin. Polymers, 14 (11). art. no. 2165. pp. 1-22. ISSN 2073-4360

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle and Anak Lukista, Debby Dyne and Irianto and Ghazali, Ihwan (2022) Application of Taguchi method to optimize the parameter of Fused Deposition Modeling (FDM) using oil palm fiber reinforced thermoplastic composites. Polymers, 14 (11). art. no. 2140. pp. 1-15. ISSN 2073-4360

Mustapha, Safarul and Lease, Jacqueline and Eksiler, Kubra and Sim, Siew Teng and Ariffin, Hidayah and Andou, Yoshito (2022) Facile preparation of cellulose fiber reinforced polypropylene using hybrid filler method. Polymers, 14 (8). art. no. 1630. pp. 1-15. ISSN 2073-4360

Hazrol, M. D. and M. Sapuan, S. and Zainudin, E. S. and A. Wahab, N. I. and A. Ilyas, R. (2022) Effect of kenaf fibre as reinforcing fillers in corn starch-based biocomposite film. Polymers, 14 (8). art. no. 1590. pp. 1-16. ISSN 2073-4360

Ganapathy, Sakthi Balan and Sakthivel, Aravind Raj and Hameed Sultan, Mohamed Thariq and Shahar, Farah Syazwani and Md Shah, Ain Umaira and Khan, Tabrej and Sebaey, Tamer A. (2022) Effect of Prosopis juliflora thorns on mechanical properties of plastic waste reinforced epoxy composites. Polymers, 14 (7). art. no. 1278. pp. 1-19. ISSN 2073-4360

Rushdan, Ahmad Ilyas and Alias, Aisyah Humaira and Nordin, Abu Hassan and Ngadi, Norzita and Mohamed Yusoff, Mohd Zuhri and Muhammad Asyraf, Muhammad Rizal and Salit, Mohd Sapuan and Zainudin, Edi Syams and Sharma, Shubham and Abral, Hairul and Mochamad Asrofi, . and Syafri, Edi and Nasmi Herlina Sari, . and Mazlan, Rafidah and Syed Zakaria, Sharifah Zarina and Razman, Muhammad Rizal and Abd Majid, Nuriah and Ramli, Zuliskandar and Azmi, Ashraf and Bangar, Sneh Punia and Ibrahim, Rushdan (2022) Natural-fiber-reinforced chitosan, chitosan blends and their nanocomposites for various advanced applications. Polymers, 14 (5). art. no. 874. pp. 1-36. ISSN 2073-4360

Baby, Rabia and Hussein, Mohd Zobir and Abdullah, Abdul Halim and Zainal, Zulkarnain (2022) Nanomaterials for the treatment of heavy metal contaminated water. Polymers, 14 (3). art. no. 583. pp. 1-17. ISSN 2073-4360

Kamal, Izdihar and Abdul Razak, Hairil Rashmizal and Abdul Karim, Muhammad Khalis and Mashohor, Syamsiah and Ying, Josephine Chyi Liew and Low, Yiin Jian and Zaaba, Nur Atiqah and Mazlan, Norkhairunnisa and Mohd Rafi, Nur Athirah Syima (2022) Mechanical and imaging properties of a clinical-grade kidney phantom based on polydimethylsiloxane and elastomer. Polymers, 14 (3). art. no. 535. pp. 1-10. ISSN 2073-4360

Ilyas, R. A. and M. Y., M. Zuhri and A., Aisyah H. and M. R., M. Asyraf and A. Hassan, S. and Zainudin, E. S. and Salit, Mohd Sapuan and Sharma, S. and Bangar, S. P. and R., Jumaidin and Nawab, Y. and M. Faudzi, A. A. and Abral, H. and M. Asrofi and E. Syafri and N. H. Sari (2022) Natural fiber-reinforced polylactic acid, polylactic acid blends and their composites for advanced applications. Polymers, 14 (1). art. no. 202. pp. 1-39. ISSN 2073-4360

M. Azlin, M. N. and Ilyas, R. A. and M. Zuhri, M. Y. and M. Sapuan, S. and M. Harussani, M. and Sharma, Shubham and Nordin, A. H. and M. Nurazzi, N. and Afiqah, A. N. (2022) 3D printing and shaping polymers, composites, and nanocomposites: a review. Polymers, 14 (1). art. no. 180. pp. 1-37. ISSN 2073-4360

Ilyas, R. A. and Zuhri, M. Y. M. and Norrrahim, Mohd Nor Faiz and Mohamad Misenan, Muhammad Syukri and Jenol, Mohd Azwan and Samsudin, Sani Amril and Nurazzi, N. M. and Asyraf, M. R. M. and Supian, A. B. M. and Bangar, Sneh Punia and Nadlene, R. and Sharma, Shubham and Omran, Abdoulhdi A. Borhana (2022) Natural fiber reinforced polycaprolactone green and hybrid biocomposites for various advanced application. Polymers, 14 (1). art. no. 182. pp. 1-28. ISSN 2073-4360

Kamarudin, Siti Hasnah and Rayung, Marwah and Abu, Falah and Ahmad, So’bah and Fadil, Fatirah and Abdul Karim, Azrena and Norizan, Mohd Nurazzi and Sarifuddin, Norshahida and Mat Desa, Mohd Shaiful Zaidi and Mohd Basri, Mohd Salahuddin and Samsudin, Hayati and Chuah Abdullah, Luqman (2022) A review on antimicrobial packaging from biodegradable polymer composites. Polymers, 14 (1). art. no. 174. pp. 1-29. ISSN 2073-4360

Aiza Jaafar, C. N. and Zainol, I. and Izyan Khairani, M. I. and Dele-Afolabi, T. T. (2022) Physical and mechanical properties of tilapia scale hydroxyapatite-filled high-density polyethylene composites. Polymers, 14 (2). art. no. 251. pp. 1-17. ISSN 2073-4360

Tarique, J. and Zainudin, E. and Sapuan, S. and Ilyas, R. and Khalina, A. (2022) Physical, mechanical, and morphological performances of arrowroot (Maranta arundinacea) fiber reinforced arrowroot starch biopolymer composites. Polymers, 14 (3). art. no. 388. pp. 1-27. ISSN 2073-4360

Shamsuri, Ahmad Adlie and Abdan, Khalina and Md. Jamil, Siti Nurul Ain (2022) Preparations and properties of ionic liquid-assisted electrospun biodegradable polymer fibers. Polymers, 14 (12). art. no. 2308. pp. 1-16. ISSN 2073-4360

Lee, Chuan Li and Chin, Kit Ling and Khoo, Pui San and Hafizuddin, Mohd Sahfani and H’ng, Paik San (2022) Production and potential application of pyroligneous acids from rubberwood and oil palm trunk as wood preservatives through vacuum-pressure impregnation treatment. Polymers, 14 (18). art. no. 3863. pp. 1-15. ISSN 2073-4360

Che Ismail, Atikah and Salim, Sabiha and Md Tahir, Paridah and Lee, Seng Hua and Abd Ghani, Muhammad Aizat and Al Edrus, Syeed Saifulazry and Ahmad Faisal, Fadhlin Qayyum (2022) Properties enhancement of oil palm trunk plywood against decay and termite for marine applications. Polymers, 14 (13). art. no. 2680. pp. 1-13. ISSN 2073-4360

Ahmad, Afiqah and Md. Jamil, Siti Nurul Ain and Choong, Thomas S. Y. and Abdullah, Abdul Halim and Faujan, Nur Hana and Adeyi, Abel A. and Daik, Rusli and Othman, Nurhanisah (2022) Removal of cationic dyes by iron modified silica/polyurethane composite: kinetic, isotherm and thermodynamic analyses, and regeneration via advanced oxidation process. Polymers, 14 (24). art. no. 5416. pp. 1-23. ISSN 2073-4360

Balakrishnan, Thinesh Sharma and Sultan, Mohamed Thariq Hameed and Naveen, Jesuarockiam and Shahar, Farah Syazwani and Najeeb, Muhammad Imran and Md Shah, Ain Umaira and Khan, Tabrej and Sebaey, Tamer Ali (2022) Selection of natural fibre for pultruded hybrid synthetic/natural fibre reinforced polymer composites using analytical hierarchy process for structural applications. Polymers, 14 (15). art. no. 3178. pp. 1-21. ISSN 2073-4360

Zakaria, Aiza Farhani and Kamaruzaman, Sazlinda and Abdul Rahman, Norizah and Yahaya, Noorfatimah (2022) Sodium alginate/β-cyclodextrin reinforced carbon nanotubes hydrogel as alternative adsorbent for nickel(ii) metal ion removal. Polymers, 14 (24). art. no. 5524. pp. 1-20. ISSN 2073-4360

Zakaria, Aiza Farhani and Kamaruzaman, Sazlinda and Abdul Rahman, Norizah and Yahaya, Noorfatimah (2022) Sodium alginate/β-cyclodextrin reinforced carbon nanotubes hydrogel as alternative adsorbent for nickel(ii) metal ion removal. Polymers, 14 (24). art. no. 5524. pp. 1-27. ISSN 2073-4360

Amerhaider Nuar, Nurul Nazihah and Md. Jamil, Siti Nurul Ain and Li, Fan and Mat Azmi, Intan Diana and Chiang, Pen Chi and Shean, Thomas Yaw Choong (2022) Synthesis of controlled-release calcium peroxide nanoparticles coated with dextran for removal of doxycycline from aqueous system. Polymers, 14 (18). art. no. 3866. pp. 1-18. ISSN 2073-4360

Sundang, Murni and Nurdin, Nur Sjanrah and Saalah, Sariah and Singam, Yamunah Jaibalah and Osman Al Edrus, Syeed SaifulAzry and Ismail, Noor Maizura and Sipaut, Coswald Stephen and Abdullah, Luqman Chuah (2022) Synthesis of jatropha-oil-based polyester polyol as sustainable biobased material for waterborne polyurethane dispersion. Polymers, 14 (18). art. no. 3715. pp. 1-15. ISSN 2073-4360

Azlin, M. N. M. and Sapuan, S. M. and Zuhri, M. Y. M. and Zainudin, Edi Syams and Ilyas, R. A. (2022) Thermal stability, dynamic mechanical analysis and flammability properties of woven kenaf/polyester-reinforced polylactic acid hybrid laminated composites. Polymers, 14 (13). art. no. 2690. pp. 1-16. ISSN 2073-4360

Gomez, Javier Chavarro and Zakaria, Rabitah and Min, Min Aung and Mokhtar, Mohd Noriznan and Yunus, Robiah (2021) Synthesis and characterization of polyurethanes from residual palm oil with high poly-unsaturated fatty acid oils as additive. Polymers, 13 (23). art. no. 4214. pp. 1-18. ISSN 2073-4360

Harrussani, M. M and Rashid, Umer and Sapuan, S. M. and Abdan, Khalina (2021) Low-temperature thermal degradation of disinfected COVID-19 non-woven polypropylene-based isolation gown wastes into carbonaceous char. Polymers, 13 (22). art. no. 3980. pp. 1-20. ISSN 2073-4360

Hashim, Mohd Khairul Rabani and Abdul Majid, Mohd Shukry and Mohd Jamir, Mohd Ridzuan and Kasim, Farizul Hafiz and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Ahmad, Kamarul Arifin and Basri, Adi Azriff (2021) The effect of stacking sequence on fatigue behaviour of hybrid pineapple leaf fibre/carbon-fibre-reinforced epoxy composites. Polymers, 13 (22). art. no. 3936. pp. 1-16. ISSN 2073-4360

Othman, Siti Hajar and Wane, Bilguisse Mamadou and Nordin, Norhazirah and Noor Hasnan, Noor Zafira and A. Talib, Rosnita and Karyadi, Joko Nugroho Wahyu (2021) Physical, mechanical, and water vapor barrier properties of starch/cellulose nanofiber/thymol bionanocomposite films. Polymers, 13 (23). art. no. 4060. pp. 1-16. ISSN 2073-4360

Kamaruzaman, Sazlinda and Mohammad Nasir, Najihah and Mohd Faudzi, Siti Munirah and Yahaya, Noorfatimah and Mohamad Hanapi, Nor Suhaila and Wan Ibrahim, Wan Nazihah (2021) Solid-phase extraction of active compounds from natural products by molecularly imprinted polymers: Synthesis and extraction parameters. Polymers, 13 (21). art. no. 3780. pp. 1-32. ISSN 2073-4360

Amri, Mohamad Ridzuan and Md Yasin, Faizah and Abddulah, Luqman Chuah and Osman Al-Edrus, Syeed SaifulAzry and Mohamad, Siti Fatahiyah (2021) Ternary nanocomposite system composing of graphene nanoplatelet, cellulose nanofiber and jatropha oil based waterborne polyurethane: characterizations, mechanical, thermal properties and conductivity. Polymers, 13 (21). pp. 1-17. ISSN 2073-4360

Hazan, Mohd Adib and Chan, Kar Fei and Jofri, Khairun Afiqa and Mamat, Md Shuhazlly and Endot, Nor Azam and Shahira Liza and Ismail, Ismayadi and Hussein, Mohd Zobir and Tanemura, Masaki and Yaakob, Yazid (2021) Waste NR latex based-precursors as carbon source for CNTs eco-fabrications. Polymers, 13 (19). Jan-17. ISSN 2073-4360

Loganathan, Tamil Moli and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Ahsan, Qumrul and Naveen, Jesuarockiam and Md Shah, Ain Umaira and Abu Talib, Abd. Rahim and Basri, Adi Azriff (2021) Physical, mechanical, and morphological properties of hybrid Cytostachys renda/kenaf fiber reinforced with multi-walled carbon nanotubes MWCNT-phenolic composites. Polymers, 13 (19). art. no. 3448. pp. 1-18. ISSN 2073-4360

Shah Faisal Khan, Sherwani and Zainudin, Edi Syams and Salit, Mohd Sapuan and Leman, Zulkiflle and Abdan, Khalina (2021) Physical, mechanical, and morphological properties of treated sugar palm/glass reinforced poly(lactic acid) hybrid composites. Polymers, 13 (21). art. no. 3620. pp. 1-25. ISSN 2073-4360

Junid, Ramli and Siregar, Januar Parlaungan and Endot, Nor Azam and Abd Razak, Jeefferie and Wilkinson, Arthur N. (2021) Optimization of glass transition temperature and pot life of epoxy blends using Response Surface Methodology (RSM). Polymers, 13 (19). art. no. 3304. pp. 1-18. ISSN 2073-4360

Lee, Seng Hua and Osman Al-Edrus, Syeed SaifulAzry and Faris Hakimi, Nik Muhammad and Wei, Chun Lum and Mohamad, Siti Fatahiyah and Park, Byung-Dae and Azmi, Anis (2021) Surface modified nanocellulose and its reinforcement in natural rubber matrix nanocomposites: a review. Polymers, 13 (19). art. no. 3241. pp. 1-24. ISSN 2073-4360

Najeeb, Muhammad Imran and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Muhammad Amir, Siti Madiha and Safri, Syafiqah Nur Azrie and Jawaid, Mohammad and Shari, Mohamad Rabaie (2021) Low velocity impact analysis of pineapple leaf fiber (PALF) hybrid composites. Polymers, 13 (18). art. no. 3194. pp. 1-18. ISSN 2073-4360

Sapiai, Napisah and Jumahat, Aidah and Jawaid, Mohammad and Abu, Md Zin and Chalid, Mochamad (2021) Mechanical performance of granite fine fly dust-filled basalt/glass polyurethane polymer hybrid composites. Polymers, 13 (18). art. no. 3032. pp. 1-16. ISSN 2073-4360

Abd Rahman, Mohd Amiruddin and Owolabi, Taoreed O. (2021) Modeling the optical properties of a polyvinyl alcohol-based composite using a particle swarm optimized support vector regression algorithm. Polymers, 13 (16). art. no. 2697. pp. 1-17. ISSN 2073-4360

Alruwais, Raja Saad and Adeosun, Waheed A. and Marwani, Hadi M. and Jawaid, Mohammad and Asiri, Abdullah M. and Khan, Anish (2021) Novel aminosilane (APTES)-grafted polyaniline@graphene oxide (PANI-GO) nanocomposite for electrochemical sensor. Polymers, 13 (15). art. no. 2562. pp. 1-16. ISSN 2073-4360

Mudri, Nurul Huda and Abdullah, Luqman Chuah and Min, Min Aung and Awang Biak, Dayang Radiah and Tajau, Rida (2021) Structural and rheological properties of nonedible vegetable oil-based resin. Polymers, 13 (15). art. no. 2490. pp. 1-18. ISSN 2073-4360

Naomi, Ruth and Bahari, Hasnah and Muhd Ridzuan, Pauzi and Othman, Fezah (2021) Natural-based biomaterial for skin wound healing (gelatin vs. collagen): expert review. Polymers, 13 (14). art. no. 2319. pp. 1-20. ISSN 2073-4360

Lu Lu, Taung Mai and Min Min, Aung and Muhamad Saidi, Sarah Anis and H’ng, Paik San and Rayung, Marwah and Mohamad Jaafar, Adila (2021) Non edible oil-based epoxy resins from jatropha oil and their shape memory behaviors. Polymers, 13 (13). art. no. 2177. pp. 1-12. ISSN 2073-4360

Abu Hassan Shaari, Helyati and Ramli, Muhammad Mahyiddin and Mohtar, Mohd Nazim and Abdul Rahman, Norizah and Ahmad, Azizan (2021) Synthesis and conductivity studies of poly (Methyl methacrylate) (PMMA) by co-polymerization and blending with polyaniline (PANi). Polymers, 13 (12). art. no. 1939. pp. 1-27. ISSN 2073-4360

Anish Khan and Mohammad Jawaid and Lau, Kia Kian and Parwaz Khan, Aftab Aslam and M. Asiri, Abdullah (2021) Isolation and production of nanocrystalline cellulose from conocarpus fiber. Polymers, 13 (11). art. no. 1835. pp. 1-11. ISSN 2073-4360

Mohd Basri, Mohd Salahuddin and Liew, Brenda Min Ren and A.Talib, Rosnita and Zakaria, Rabitah and Kamarudin, Siti Hasnah (2021) Novel mangosteen-leaves-based marker ink: color lightness, viscosity, optimized composition, and microstructural analysis. Polymers, 13 (10). art. no. 1581. pp. 1-18. ISSN 2073-4360

Mohamad Mukhair, Hayati and Abdullah, Abdul Halim and Zainal, Zulkarnain and Lim, Hong Ngee (2021) PES-Ag3PO4/g-C3N4 mixed matrix film photocatalyst for degradation of methyl orange dye. Polymers, 13 (11). art. no. 1746. pp. 1-14. ISSN 2073-4360

Lee, Ching Hao and Abdan, Khalina and Norizan, Mohd Nurazzi and Abdullah, Norli and M., M. Harussani and Shafi, Ayu Rafiqah and Alias, Aisyah Humaira and Ramli, Natasha (2021) The challenges and future perspective of Kenaf Wo-ven reinforcement in thermoset polymer composites in Malaysia: a review. Polymers, 13 (9). art. no. 1390. pp. 1-17. ISSN 2073-4360

Norrrahim, Mohd Nor Faiz and Ariffin, Hidayah and Tengku Yasim Anuar, Tengku Arisyah and Hassan, Mohd Ali and Ibrahim, Nor Azowa and Wan Yunus, Wan Md Zin and Nishida, Haruo (2021) Performance evaluation of cellulose nanofiber with residual hemicellulose as a nanofiller in polypropylene-based nanocomposite. Polymers, 13 (7). art. no. 1064. pp. 1-14. ISSN 2073-4360

Lee, Ka Kit and Low, Darren Yi Sern and Foo, Mei Ling and Yu, Lih Jiun and Choong, Thomas Shean Yaw and Tang, Siah Ying and Tan, Khang Wei (2021) Molecular dynamics simulation of nanocellulose-stabilized pickering emulsions. Polymers, 13 (4). art. no. 668. pp. 1-15. ISSN 2073-4360

Rasheed, Masrat and Jawaid, Mohammad and Parveez, Bisma and Bhat, Aamir Hussain and Alamery, Salman (2021) Morphology, structural, thermal, and tensile properties of bamboo microcrystalline cellulose/poly(lactic acid)/poly(butylene succinate) composites. Polymers, 13 (3). art. no. 465. pp. 1-15. ISSN 2073-4360

Rabani Hashim, Mohd Khairul and Abdul Majid, Mohd Shukry and Mohd Jamir, Mohd Ridzuan and Kasim, Farizul Hafiz and Hameed Sultan, Mohamed Thariq (2021) The effect of stacking sequence and ply orientation on the mechanical properties of pineapple leaf fibre PALF/carbon hybrid laminate composites. Polymers, 13 (3). art. no. 455. Jan-24. ISSN 2073-4360

Sharip, Nur Sharmila and Ariffin, Hidayah and Tengku Yasim-Anuar, Tengku Arisyah and Andou, Yoshito and Shirosaki, Yuki and Jawaid, Mohammad and Md Tahir, Paridah and Ibrahim, Nor Azowa (2021) Melt- vs. non-melt blending of complexly processable ultra-high molecular weight polyethylene/ cellulose nanofiber bionanocomposite. Polymers, 13 (3). art. no. 404. pp. 1-15. ISSN 2073-4360

Aziman, Nurain and Lau, Kia Kian and Jawaid, Mohammad and Sanny, Maimunah and Alamery, Salman (2021) Morphological, structural, thermal, permeability and antimicrobial activity of PBS and PBS/TPS films incorporated with Biomaster-silver for food packaging application. Polymers, 13 (3). art. no. 391. pp. 1-15. ISSN 2073-4360

R. Koloor, S. S. and Karimzadeharani, A. and Abdullah, M. R. and Petrů, M. and Yidris, N. and Sapuan, S. M. and Tamin, M. N. (2021) Linear-nonlinear stiffness responses of carbon fiber-reinforced polymer composite materials and structures: a numerical study. Polymers, 13 (3). art. no. 344. pp. 1-22. ISSN 2073-4360

Omran, Abdoulhdi A. Borhana and Mohammed, Abdulrahman A. B. A. and S., M. Sapuan and R., A. Ilyas and M. R., M. Asyraf and Seyed Saeid, Rahimian Koloor and Petrů, Michal (2021) Micro- and nanocellulose in polymer composite materials: a review. Polymers, 13 (2). art. no. 231. pp. 1-35. ISSN 2073-4360

R. A., Ilyas and M. Y., M. Zuhri and Norrrahim, Mohd Nor Faiz and Mohamad Misenan, Muhammad Syukri and Jenol, Mohd Azwan and Samsudin, Sani Amril and Nurazzi, N. M. and Asyraf, M. R. M. and Supian, A. B. M. and Bangar, Sneh Punia and Nadlene, R. and Sharma, Shubham and A. Borhana Omran, Abdoulhdi (2021) Natural fiber-reinforced polycaprolactone green and hybrid biocomposites for various advanced applications. Polymers, 14 (1). art. no. 182. pp. 1-28. ISSN 2073-4360

A. Bakar, Balkis Fatomer and Kamke, Frederick A. (2021) Alkali concentration and diluent effects on properties of grape cane fiber-reinforced polymer composites. Polymers, 13 (23). art. no. 4055. pp. 1-15. ISSN 2073-4360

Rasheed, Masrat and Jawaid, Mohammad and Parveez, Bisma (2021) Bamboo fiber based cellulose nanocrystals/poly(Lactic Acid)/Poly(Butylene Succinate) nanocomposites: morphological, mechanical and thermal properties. Polymers, 13 (7). art. no. 1076. pp. 1-15. ISSN 2073-4360

Tuan Mohamood, Nur Fattima’ Al-Zahara’ and Abdul Halim, Abdul Hakam and Zainuddin, Norhazlin (2021) Carboxymethyl cellulose hydrogel from biomass waste of oil palm empty fruit bunch using calcium chloride as crosslinking agent. Polymers, 13 (23). art. no. 4056. pp. 1-17. ISSN 2073-4360

Shazleen, Siti Shazra and Ng, Lawrence Yee Foong and Ibrahim, Nor Azowa and Hassan, Mohd Ali and Ariffin, Hidayah (2021) Combined effects of cellulose nanofiber nucleation and maleated polylactic acid compatibilization on the crystallization kinetic and mechanical properties of polylactic acid nanocomposite. Polymers, 13 (19). art. no. 3226. pp. 1-25. ISSN 2073-4360

Syed Abdullah, Syed Ahmad Saufi and Mohamed Yusoff, Mohd Zuhri and Mohammad Reza, Lalegani Dezaki and Salit, Mohd Sapuan and R. A., Ilyas and As'arry, Azizan and Mohd Ariffin, Mohd Khairol Anuar and M., Bodaghi (2021) Compression behaviour of bio-inspired honeycomb reinforced starfish shape structures using 3D printing technology. Polymers, 13 (24). pp. 1-17. ISSN 2073-4360

Katibi, Kamil Kayode and Yunos, Khairul Faezah and Che Man, Hasfalina and Aris, Ahmad Zaharin and Mohd Nor, Mohd Zuhair and Azis, Raba'ah Syahidah and Mohammed Umar, Abba (2021) Contemporary techniques for remediating endocrine-disrupting compounds in various water sources: advances in treatment methods and their limitations. Polymers, 13 (19). pp. 1-20. ISSN 2073-4360

Ahmad Ahangar, Firdous and Rashid, Umer and Ahmad, Junaid and Tsubota, Toshiki and Alsalme, Ali (2021) Conversion of waste Polyethylene Terephthalate PET Polymer into activated carbon and its feasibility to produce green fuel. Polymers, 13 (22). art. no. 3952. pp. 1-10. ISSN 2073-4360

Md Damiri, Mohamad Hazrol and Salit, Mohd Sapuan and Zainudin, Edi Syams and Mohamed Yusoff, Mohd Zuhri and Abdul Wahab, Noor Izzri (2021) Corn starch (Zea mays) biopolymer plastic reaction in combination with sorbitol and glycerol. Polymers, 13 (2). pp. 1-22. ISSN 2073-4360

Othman, Siti Hajar and Othman, Nur Fitrah Liyana and Ahmad Shapi’i, Ruzanna and Ariffin, Siti Hajar and Md. Yunos, Khairul Faezah (2021) Corn starch/chitosan nanoparticles/thymol bio-nanocomposite films for potential food packaging applications. Polymers, 13 (3). pp. 1-19. ISSN 2073-4360

M. J., Suriania and Rapi, Hannah Zalifah and Ilyas, R. A. and Petrů, Michal and Salit, Mohd Sapuan (2021) Delamination and manufacturing defects in natural fiber-reinforced hybrid composite: a review. Polymers, 13 (8). pp. 1-24. ISSN 2073-4360

Moklis, Muhammad Harussani and Salit, Mohd Sapuan and A. H. M., Firdaus and El-Badry, Yaser A. and Hussein, Enas E. and El-Bahy, Zeinhom M. (2021) Determination of the tensile properties and biodegradability of cornstarch-based biopolymers plasticized with sorbitol and glycerol. Polymers, 13 (21). pp. 1-12. ISSN 2073-4360

Ebadi, Mona and Bullo, Saifullah and Buskaran, Kalaivani and Hussein, Mohd Zobir and Fakurazi, Sharida and Pastorin, Giorgia (2021) Dual-functional iron oxide nanoparticles coated with polyvinyl alcohol/5-fluorouracil/zinc-aluminium-layered double hydroxide for a simultaneous drug and target delivery system. Polymers, 13 (6). pp. 1-18. ISSN 2073-4360

Haris, Nur Izzah Nabilah and Ilyas, R. A. and Hassan, Mohamad Zaki and Salit, Mohd Sapuan and Afdzaluddin, Atiqah and Jamaludin, Khairur Rijal and Zaki, Sheikh Ahmad and Ramlie, Faizir (2021) Dynamic mechanical properties and thermal properties of longitudinal basalt/woven glass fiber reinforced unsaturated polyester hybrid composites. Polymers, 13 (19). pp. 1-14. ISSN 2073-4360

Amri, Mohamad Ridzuan and Chuah, Teong Guan and Al-Edrus, Syeed Saifulazry Osman and Md Yasin, Faizah and Mohamad, Siti Fatahiyah (2021) Effect of cellulose nanofibrils on the properties of Jatropha oil-based waterborne polyurethane nanocomposite film. Polymers, 13 (9). pp. 1-14. ISSN 2073-4360

Khoo, Pui San and Chin, Kit Ling and Lee, Chuan Li and H’ng, Paik San and Mohd Sahfani, Mohd Nor Hafizuddin (2021) Effect of glue spreads on the structural properties of laminated veneer lumber from spindleless rotary veneers recovered from short rotation hevea plantation logs. Polymers, 13 (21). art. no. 3799. pp. 1-17. ISSN 2073-4360

Sanmuham, Vikneswari and Hameed Sultan, Mohamed Thariq and Ali, Mohd Radzi and Shamsuri, Ahmad Adlie and Md Shah, Ain Umaira and Safri, Syafiqah Nur Azrie and Basri, Adi Azriff (2021) Effect of silver nanopowder on mechanical, thermal and antimicrobial properties of kenaf/HDPE composites. Polymers, 13 (22). pp. 1-14. ISSN 2073-4360

Alhaji, Ibrahim Abubakar and Abbas, Zulkifly and Mohd Zaid, Mohd Hafiz and Khamis, Ahmad Mamoun (2021) Effects of particle size on the dielectric, mechanical, and thermal properties of recycled borosilicate glass-filled PTFE microwave substrates. Polymers, 13 (15). pp. 1-15. ISSN 2073-4360

Khamis, Ahmad Mamoun and Abbas, Zulkifly and Azis, Raba'ah Syahidah and Mensah, Ebenezer Ekow and Alhaji, Ibrahim Abubakar (2021) Effects of recycled Fe2O3 nanofiller on the structural, thermal, mechanical, dielectric, and magnetic properties of PTFE matrix. Polymers, 13 (14). pp. 1-20. ISSN 2073-436

Alsafrani, Amjad E. and Adeosun, Waheed A. and Marwani, Hadi M. and Khan, Imran and Jawaid, Mohammad and Asiri, Abdullah M. and Khan, Anish (2021) Efficient synthesis and characterization of Polyaniline@Aluminium–succinate metal-organic frameworks nanocomposite and its application for Zn(II) ion sensing. Polymers, 13 (19). pp. 1-21. ISSN 2073-4360

Zakaria, Aiza Farhani and Kamaruzaman, Sazlinda and Abdul Rahman, Norizah (2021) Electrospun polyacrylonitrile/lignin/poly(Ethylene Glycol)-based porous activated carbon nanofiber for removal of Nickel(II) ion from aqueous solution. Polymers, 13 (20). pp. 1-17. ISSN 2073-4360

Borzehandani, Mostafa Yousefzadeh and Abdulmalek, Emilia and Abdul Rahman, Mohd Basyaruddin and Mohammad Latif, Muhammad Alif (2021) Elucidating the aromatic properties of covalent organic frameworks surface for enhanced polar solvent adsorption. Polymers, 13 (11). pp. 1-15. ISSN 2073-4360

Masoud, Fathi and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Nukman, Y. and Bayraktar, Emin (2021) Experimental analysis of heat-affected zone HAZ in laser cutting of sugar palm fiber reinforced unsaturated polyester composites. Polymers, 13 (5). pp. 1-13. ISSN 2073-4360

Masoud, Fathi and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Nukman, Y. and Bayraktar, Emin (2021) Experimental analysis of kerf taper angle in cutting process of sugar palm fiber reinforced unsaturated polyester composites with laser beam and abrasive water jet cutting technologies. Polymers, 13 (15). pp. 1-24. ISSN 2073-4360

Kamaruddin, Zatil Hazrati and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Jumaidin, Ridhwan (2021) Extraction and characterization of potential biodegradable materials based on Dioscorea hispida tubers. Polymers, 13 (4). pp. 1-19. ISSN 2073-4360

Azum, Naved and Jawaid, Mohammad and Lau, Kia Kian and Khan, Anish and Alotaibi, Maha Moteb (2021) Extraction of microcrystalline cellulose from Washingtonia fibre and its characterization. Polymers, 13 (18). pp. 1-13. ISSN 2073-4360

Mohd Sahfani, Nor Hafizuddin and Lee, Chuan Li and Chin, Kit Ling and H’ng, Paik San and Khoo, Pui San and Rashid, Umer (2021) Fabrication of highly microporous structure activated carbon via surface modification with sodium hydroxide. Polymers, 13 (22). art. no. 3954. pp. 1-16. ISSN 2073-4360

Mohd Nurazzi, Norizan and Muhammad Rizal, Muhammad Asyraf and Khalina, Abdan and Abdullah, Norli and Sabaruddin, Fatimah Athiyah and Kamarudin, Siti Hasnah and Ahmad, So’bah and Mahat, Annie Maria and Lee, Chuan Li and Alias, Aisyah Humaira and Norrrahim, Mohd Nor Faiz and Rushdan, Ahmad Ilyas and Moklis, Muhammad Harussani and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan (2021) Fabrication, functionalization, and application of carbon nanotube-reinforced polymer composite: an overview. Polymers, 13 (7). art. no. 1047. pp. 1-45. ISSN 2073-4360

M. J., Suraini and Mohd Radzi, Fathin Sakinah and R. A., Ilyas and Petrů, Michal and Salit, Mohd Sapuan and C. M., Ruzaidi (2021) Flammability, tensile and morphological properties of oil palm empty fruit bunches fibre/ pet yarn reinforced epoxy fibre retardant hybrid polymer composites. Polymers, 13 (8). art. no. 1282. pp. 1-18. ISSN 2073-4360

Shazleen, Siti Shazra and Tengku Yasim Anuar, Tengku Arisyah and Ibrahim, Nor Azowa and Hassan, Mohd Ali and Ariffin, Hidayah (2021) Functionality of cellulose nanofiber as bio-based nucleating agent and nano-reinforcement material to enhance crystallization and mechanical properties of polylactic acid nanocomposite. Polymers, 13 (3). art. no. 389. pp. 1-18. ISSN 2073-4360

Norrrahim, Mohd Nor Faiz and Muhammad Huzaifah, Muhammad Roslim and Ahmad Farid, Mohammed Abdillah and Shazleen, Siti Shazra and Mohamad Misenan, Muhammad Syukri and Tengku Yasim-Anuar, Tengku Arisyah and Naveen, Jesuarockiam and Mohd Nurazzi, Norizan and Rani, Mohd Saiful Asmal and Hakimi, Mohd Idham and Ahmad Ilyas, Rushdan and Jenol, Mohd Azwan (2021) Greener pretreatment approaches for the valorisation of natural fibre biomass into bioproducts. Polymers, 13 (17). art. no. 2971. pp. 1-26. ISSN 2073-4360

Ali, Md. Rowson and Abdullah, Ummi Hani and Ashaari, Zaidon and Hamid, Norul Hisham and Lee, Seng Hua (2021) Hydrothermal modification of wood: a review. Polymers, 13 (16). pp. 1-18. ISSN 2073-4360

M. J., Suriani and Zainudin, Hasliana Asyikin and Ilyas, R. A. and Petrů, Michal and Salit, Mohd Sapuan and Ghazali, Che Mohd Ruzaidi and Mustapha, Rohani (2021) Kenaf fiber/pet yarn reinforced epoxy hybrid polymer composites: morphology, tensile and flammability properties. Polymers, 13 (9). art. no. 1532. pp. 1-18. ISSN 2073-4360

Jaafar, Adila Mohamad and Hasnu, Norafida and Zainal, Zulkarnain and Masarudin, Mas Jaffri and Md. Ajat, Mohd Mokrish and Aung, Min Min and Rayung, Marwah (2021) Preparation, characterisation and antibacterial activity of carvacrol encapsulated in gellan gum hydrogel. Polymers, 13 (23). art. no. 4153. pp. 1-14. ISSN 2073-4360

Katibi, Kamil Kayode and Yunos, Khairul Faezah and Che Man, Hasfalina and Aris, Ahmad Zaharin and Mohd Nor, Mohd Zuhair and Azis, Rabaah Syahidah (2021) Recent advances in the rejection of endocrine-disrupting compounds from water using membrane and membrane bioreactor technologies: a review. Polymers, 13 (3). art. no. 392. pp. 1-52. ISSN 2073-4360

Shaharuddin, Mohd Izwan and Salit, M. Sapuan and Mohamed Yusoff, M. Zuhri and Abdul Rahman, Mohamed (2021) Thermal stability and dynamic mechanical analysis of benzoylation treated sugar palm/kenaf fiber reinforced polypropylene hybrid composites. Polymers, 13 (17). art. no. 2961. pp. 1-18. ISSN 2073-4360

Ahmad Saffian, Harmaen and Yamaguchi, Masayuki and Ariffin, Hidayah and Abdan, Khalina and Kassim, Nur Kartinee and Lee, Seng Hua and Lee, Ching Hao and Shafi, Ayu Rafiqah and Alias, Aisyah Humairah (2021) Thermal, physical and mechanical properties of polybutylene succinate/kenaf core fibers composites reinforced with esterified lignin. Polymers, 13 (14). art. no. 2359. pp. 1-16. ISSN 2073-4360

Norizan, M. Nurazzi and Muhammad Rizal, M. Asyraf and M., Rayung and M. N., F. Norrrahim and S., S. Shazleen and M. S., A. Rani and Shafi, Ayu Rafiqah and Alias, Aisyah Humaira and M. H., M. Radzi and Sabaruddin, F. A. and R., A. Ilyas and Zainudin, E.dy Syams and Abdan, Khalina (2021) Thermogravimetric analysis properties of cellulosic natural fiber polymer composites: a review on influence of chemical treatments. Polymers, 13 (16). art. no. 2710. pp. 1-33. ISSN 2073-4360

Omar, Nur Alia Sheh and Yap, Wing Fen and Ramli, Irmawati and Sadrolhosseini, Amir Reza and Abdullah, Jaafar and Yusof, Nor Azah and Mustapha Kamil, Yasmin and Mahdi, Mohd Adzir (2021) An optical sensor for dengue envelope proteins using Polyamidoamine Dendrimer biopolymer-based nanocomposite thin film: enhanced sensitivity, selectivity, and recovery studies. Polymers, 13 (5). art. no. 762. pp. 1-14. ISSN 2073-4360

Mohd Nurazzi, Norizan and M. Asyraf, M. R. and Sabaruddin, Fatimah Athiyah and Shamsudin, Siti Shazra Shazleen and Shafi, Ayu Rafiqah and Moklis, Muhammad Harussani and Kamarudin, S. H. and Razman, M. R. and M., Rahmah and Zainudin, Edi Syams and Ilyas, R. A. and Alias, Aisyah Humaira and M. N. F., Norrrahim and Abdullah, N. and Salit, Mohd Sapuan and A., Khalina (2021) A review on mechanical performance of hybrid natural fiber polymer composites for structural applications. Polymers, 13 (13). art. no. 2170. pp. 1-59. ISSN 2073-4360

Shafi, Ayu Rafiqah and Abdan, Khalina and Harmaen, Ahmad Saffian and Mohamed Amin Tawakkal, Intan Syafinaz and Zaman, Khairul and Asim, Mohammad and Norizan, Mohd Nurazzi and Lee, Ching Hao (2021) A review on properties and application of bio-based poly(Butylene Succinate). Polymers, 13 (9). art. no. 1436. pp. 1-28. ISSN 2073-4360

Sabaruddin, Fatimah Athiyah and Paridah, M. T. and Salit, Mohd Sapuan and Rusydan, Ahmad Ilyas and Seng, Hua Lee and Abdan, Khalina and Mazlan, Norkhairunnisa and Muhammad Roseley, Adlin Sabrina and Shawkataly, Abdul Khalil H. P. (2020) The effects of unbleached and bleached nanocellulose on the thermal and flammability of plypropylene-reinforced kenaf core hybrid polymer bionanocomposites. Polymers, 13 (1). art. no. 116. pp. 1-19. ISSN 2073-4360

Mohd Basri, Mohd Salahuddin and Mustapha, Faizal and Mazlan, Norkhairunnisa and Ishak, Mohd Ridzwan (2020) Optimization of adhesion strength and microstructure properties by using response surface methodology in enhancing the rice husk ash-based geopolymer composite coating. Polymers, 12 (11). art. no. 2709. pp. 1-15. ISSN 2073-4360

Md Nasir, Nur’Izzah and Abdulmalek, Emilia and Zainuddin, Norhazlin (2020) Preparation and optimization of water-soluble cationic sago starch with a high degree of substitution using response surface methodology. Polymers, 12 (11). pp. 1-14. ISSN 2073-4360

Ahmad, Ahmad Fahad and Abd. Aziz, Sidek and Yaakob, Yazid and Abd Ali, Ammar and Issa, Nour Attallah (2020) Preparation and characterization of semi-flexible substrate from natural fiber/ nickel oxide/polycaprolactone composite for microstrip patch antenna circuitries for microwave applications. Polymers, 12 (10). pp. 1-8. ISSN 2073-4360

Salit, Mohd Sapuan and H. S., Aulia and Rushdan, Ahmad Ilyas and A., Atiqah and Theophilus, Dele-Afolabi Temitope and Norizan, Mohd Nurazzi and A. B. M., Supian and Mahamud, Siti Nur Atikah (2020) Mechanical properties of longitudinal basalt/woven-glass-fiber-reinforced unsaturated polyester-resin hybrid composites. Polymers, 12 (10). pp. 1-14. ISSN 2073-4360

A., Nazrin and Salit, Mohd Sapuan and M. Y. M., Zuhri (2020) Mechanical, physical and thermal properties of sugar palm nanocellulose reinforced thermoplastic starch (TPS)/poly(lactic acid) (PLA) blend bionanocomposites. Polymers, 12 (10). art. no. 2216. pp. 1-18. ISSN 2073-4360

Ahmad Saffian, Harmaen and Talib, Mohd Aizam and Lee, Seng Hua and Md. Tahir, Paridah and Lee, Ching Hao and Ariffin, Hidayah and Mohamed Asa'ari, Ainun Zuriyati (2020) Mechanical strength, thermal conductivity and electrical breakdown of kenaf core fiber/lignin/polypropylene biocomposite. Polymers, 12 (8). art. no. 1833. pp. 1-13. ISSN 2073-4360

Muhamad Fauzi, Nurul Illya and Yap, Wing Fen and Sheh Omar, Nur Alia and Saleviter, Silvan and Mohd Daniyal, Wan Mohd Ebtisyam Mustaqim and Hashim, Hazwani Suhaila and Mohd Nasrullah (2020) Nanostructured chitosan/maghemite composites thin film for potential optical detection of mercury ion by surface plasmon resonance investigation. Polymers, 12 (7). pp. 1-13. ISSN 2073-4360

Hassan, Mohamad Zaki and Roslan, Siti Amni and Salit, Mohd Sapuan and A. Rasid, Zainudin and Mohd Nor, Ariff Farhan and Md Daud, Mohd Yusof and Dolah, Rozzeta and Mohamed Yusoff, Mohd Zuhri (2020) Mercerisation optimization of bamboo (Bambusa vulgaris) fibre reinforced epoxy composite structures using Box-Behnken design. Polymers, 12 (6). pp. 1-19. ISSN 2073-4360

Siakeng, Ramengmawii and Jawaid, Mohammad and Khan, Mohammad Asim and Siengchin, Suchart (2020) Accelerated weathering and soil burial effect on biodegradability, colour and textureof coir/pineapple leaf fibres/PLA biocomposites. Polymers, 12 (2). art. no. 458. pp. 1-15. ISSN 2073-4360

Usman, Fahad and Dennis, John Ojur and Mkawi, E. M. and Al-Hadeethi, Yas and Meriaudeau, Fabrice and Yap, Wing Fen and Sadrolhosseini, Amir Reza and Ferrell, Thomas L. and Alsadig, Ahmed and Sulieman, Abdelmoneim (2020) Acetone vapor-sensing properties of chitosan-polyethylene glycol using surface plasmon resonance technique. Polymers, 12 (11). art. no. 2586. pp. 1-17. ISSN 2073-4360

Razali, Mohamad Omar Syafiq and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Rushdan, Ahmad Ilyas and Asmawi, Nazrin Nurarief Mardi and Faisal Khan, Sherwani Shah and Abdan, Khalina (2020) Antimicrobial activities of starch-based biopolymers and biocomposites incorporated with plant essential oils: a review. Polymers, 12 (10). pp. 1-26. ISSN 2073-4360

Ahmad, Ahmad Fahad and Ab. Aziz, Sidek and Obaiys, Suzan Jabbar and Mohd Zaid, Mohd Hafiz and Matori, Khamirul Amin and Samikannu, Kanagesan and Aliyu, Umar Sa'as (2020) Biodegradable poly (lactic acid)/poly (ethylene glycol) reinforced multi-walled carbon nanotube nanocomposite fabrication, characterization, properties, and applications. Polymers, 12 (2). art. no. 427. pp. 1-22. ISSN 2073-4360

Al-Otaibi, Mohammed Sh. and Alothman, Othman Y. and Alrashed, Maher M. and Anis, Arfat and Naveen, Jesuarockiam and Jawaid, Mohammad (2020) Characterization of date palm fiber-reinforced different polypropylene matrices. Polymers, 12 (3). art. no. 597. pp. 1-19. ISSN 2073-4360

Abd Malek, Farah Hanan and Jawaid, Mohammad and Md Tahir, Paridah and Naveen, Jesuarockiam (2020) Characterization of hybrid oil palm empty fruit bunch/woven kenaf fabric-reinforced epoxy composites. Polymers, 12 (9). art. no. 2052. pp. 1-13. ISSN 2073-4360

Fouad, Hassan and Lau, Kia Kian and Jawaid, Mohammad and Alotaibi, Majed D. and Alothman, Othman Y. and Hashem, Mohamed (2020) Characterization of microcrystalline cellulose isolated from conocarpus fiber. Polymers, 12 (12). pp. 1-11. ISSN 2073-4360

Ahmad, Ahmad Fahad and Ab Aziz, Sidek and Abbas, Zulkifly and Abdalhadi, Daw M. and Khamis, Ahmad Mamoun and Aliyu, Umar Sa'ad (2020) Computational and experimental approaches for determining scattering parameters of OPEFB/PLA composites to calculate the absorption and attenuation values at microwave frequencies. Polymers, 12 (9). pp. 1-19. ISSN 2073-4360

Masoud, Fathi and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Y., Nukman and Bayraktar, Emin (2020) Cutting processes of natural fiber reinforced polymer composites. Polymers, 12 (6). art. no. 1332. pp. 1-17. ISSN 2073-4360

Siew, Sand Chee and Jawaid, Mohammad and Alothman, Othman Y. and Fouad, Hassan (2020) Effects of nanoclay on mechanical and dynamic mechanical properties of bamboo/kenaf reinforced epoxy hybrid composites. Polymers, 13 (3). pp. 1-17. ISSN 2073-4360

Cha, Yee Kuen and Galen, Tieo and Fakurazi, Sharida and Othman, Siti Sarah and Masarudin, Mas Jaffri (2020) Increased cytotoxic efficacy of protocatechuic acid in A549 human lung cancer delivered via hydrophobically modified-chitosan nanoparticles as an anticancer modality. Polymers, 12 (9). art. no. 1951. pp. 1-24. ISSN 2073-4360

Abdulsalam, Mohammed and Che Man, Hasfalina and Goh, Pei Sean and Yunos, Khairul Faezah and Zainal Abidin, Zurina and Isma M.I., Aida and Ismail, Ahmad Fauzi (2020) Permeability and antifouling augmentation of a hybrid PVDF-PEG membrane using Nano-magnesium oxide as a powerful mediator for POME decolorization. Polymers, 12 (3). art. no. 549. pp. 1-22. ISSN 2073-4360

Abdulsalam, Mohammed and Che Man, Hasfalina and Goh, Pei Sean and Md. Yunos, Khairul Faezah and Zainal Abidin, Zurina and Mohamad Idris, Aida Isma and Ismail, Ahmad Fauzi (2020) Permeability and antifouling augmentation of a hybrid PVDF-PEG membrane using nano-magnesium oxide as a powerful mediator for POME decolorization. Polymers, 12 (3). art. no. 549. pp. 1-21. ISSN 2073-4360

Shaipulizan, Nur Syafiqah and Md. Jamil, Siti Nurul Ain and Kamaruzaman, Sazlinda and Subri, Nur Nida Syamimi and Adeyi, Abel Adekanmi and Abdullah, Abdul Halim and Abdullah, Luqman Chuah (2020) Preparation of ethylene glycol dimethacrylate (EGDMA)-based terpolymer as potential sorbents for pharmaceuticals adsorption. Polymers, 12 (2). art. no. 423. pp. 1-19. ISSN 2073-4360

Tengku Yasim Anuar, Tengku Arisyah and Ariffin, Hidayah and Norrrahim, Mohd Nor Faiz and Hassan, Mohd Ali and Andou, Yoshito and Tsukegi, Takayuki and Nishida, Haruo (2020) Well-dispersed cellulose nanofiber in low density polyethylene nanocomposite by liquid-assisted extrusion. Polymers, 12 (4). art. no. 927. pp. 1-17. ISSN 2073-4360

Koloor, Seyed Saeid Rahimian and Karimzadeh, Atefeh and Yidris, Noorfaizal and Petrů, Michal and Ayatollahi, Majid Reza and Tamin, Mohd Nasir (2020) An energy-based concept for yielding of multidirectional FRP composite structures using a mesoscale lamina damage model. Polymers, 12 (1). art. no. 157. pp. 1-18. ISSN 2073-4360

Lee, Seng Hua and Md Tahir, Paridah and Lum, Wei Chen and Tan, Li Peng and Bawon, Paiman and Park, Byung-Dae and Al Edrus, Syeed SaifulAzry Osman and Abdullah, Ummi Hani (2020) A review on citric acid as green modifying agent and binder for wood. Polymers, 12. art. no. 1692. pp. 1-21. ISSN 2073-4360

Sabbagh, Hazem Abdul Kader and Hussein-Al-Ali, Samer Hasan and Hussein, Mohd Zobir and Abudayeh, Zead and Ayoub, Rami and Abudoleh, Suha Mujahed (2020) A statistical study on the development of metronidazole-chitosan-alginate nanocomposite formulation using the full factorial design. Polymers, 12 (4). art. no. 772. pp. 1-23. ISSN 2073-4360

Karimzadeh, Atefeh and Ayatollahi, Majid Reza and Koloor, Seyed Saeid Rahimian and Abdul Razak, Bushroa and Yahya, Mohd Yazid and Tamin, Mohd Nasir (2019) Assessment of compressive mechanical behavior of Bis-GMA polymer using hyperelastic models. Polymers, 11 (10). art. no. 1571. pp. 1-17. ISSN 2073-4360

Ahmad, Ahmad Fahad and Ab. Aziz, Sidek and Abbas, Zulkifly and Obaiys, Suzan Jabbar and Matori, Khamirul Amin and Mohd Zaid, Mohd Hafiz and Raad, Haider K. and Aliyu, Umar Sa'ad (2019) Chemically reduced graphene oxide-reinforced poly(lactic acid)/poly(ethylene glycol) nanocomposites: preparation, characterization, and applications in electromagnetic interference shielding. Polymers, 11 (4). art. no. 661. pp. 1-20. ISSN 2073-4360

Mensah, Ebenezer Ekow and Abbas, Zulkifly and Azis, Raba'ah Syahidah and Ibrahim, Nor Azowa and Khamis, Ahmad Mamoun (2019) Complex permittivity and microwave absorption properties of OPEFB fiber–polycaprolactone composites filled with recycled hematite (α-Fe2O3) nanoparticles. Polymers, 11 (5). art. no. 918. pp. 1-11. ISSN 2073-4360

Challabi, Ahmed Jaafar Hussein and Chieng, Buong Woei and Ibrahim, Nor Azowa and Ariffin, Hidayah and Zainuddin, Norhazlin (2019) Effect of superheated steam treatment on the mechanical properties and dimensional stability of PALF/PLA biocomposite. Polymers, 11 (3). art. no. 482. pp. 1-13. ISSN 2073-4360

Naveen, Jesuarockiam and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan (2019) Enhanced thermal and dynamic mechanical properties of synthetic/natural hybrid composites with graphene nanoplateletes. Polymers, 11 (7). art. no. 1085. pp. 1-18. ISSN 2073-4360

Hasan, M. and Chong, E. W. N. and Jafarzadeh, Shima and Md. Tahir, Paridah and Gopakumar, Deepu A. and Tajarudin, Husnul Azan and Thomas, Sabu and H. P. Shawkataly, Abdul Khalil (2019) Enhancement in the physico-mechanical functions of seaweed biopolymer film via embedding fillers for plasticulture application-a comparison with conventional biodegradable mulch film. Polymers, 11 (2). pp. 1-19. ISSN 2073-4360

Hasan, Muhammad and Chong, Eunice Wan Ni and Jafarzadeh, Shima and Md. Tahir, Paridah and Gopakumar, Deepu Ambika and Tajarudin, Husnul Azan and Thomas, Sabu and H. P. Shawkataly, Abdul Khalil (2019) Enhancement in the physico-mechanical functions of seaweed biopolymer film via embedding fillers for plasticulture application—a comparison with conventional biodegradable mulch film. Polymers, 11 (2). art. no. 210. pp. 1-19. ISSN 2073-4360

Mohd Saad, Nurul Atiqah and Gopakumar, Deepu A. and Taiwo, Owolabi Folahan Abdulwahab and Pottathara, Yasir Beeran and Rizal, Samsul and N. A., Sri Aprilia and Hermawan, Dede and Md. Tahir, Paridah and Thomas, Sabu and H. P. Shawkataly, Abdul Khalil (2019) Extraction of cellulose nanofibers via eco-friendly supercritical carbon dioxide treatment followed by mild acid hydrolysis and the fabrication of cellulose nanopapers. Polymers, 11 (11). art. no. 1813. pp. 1-14. ISSN 2073-4360

Ahmad, Afiqah and Md. Jamil, Siti Nurul Ain and Choong, Thomas Shean Yaw and Abdullah, Abdul Halim and Mastuli, Mohd Sufri and Othman, Nurhanisah and Jiman, Nurnazurah (2019) Green flexible polyurethane foam as Fe-Si adsorbent support for the removal of methylene blue from aqueous solution. Polymers, 11 (12). pp. 1-15. ISSN 2073-4360

Ahmad, Nur Afiqah and Md. Jamil, Siti Nurul Ain and Choong, Thomas Shean Yaw and Abdullah, Abdul Halim and Mastuli, Mohd Sufri and Othman, Nurhanisah and Jiman, Nurnazurah (2019) Green flexible polyurethane foam as a potent support for Fe-Si adsorbent. Polymers, 11 (12). art. no. 2011. pp. 1-15. ISSN 2073-4360

Majeed, Khaliq and Ahmed, Ashfaq and Abu Bakar, Muhammad Saifullah and Mahlia, Teuku Meurah Indra and Saba, Naheed and Hassan, Azman and Jawaid, Mohammad and Hussain, Murid and Iqbal, Javed and Ali, Zulfiqar (2019) Mechanical and thermal properties of montmorillonite-reinforced polypropylene/rice husk hybrid nanocomposites. Polymers, 11 (10). art. no. 1557. pp. 1-14. ISSN 2073-4360

Rani, Ekta and Mohshim, Siti Akhtar and Ahmad, Muhammad Zamharir and Goodacre, Royston and Alang Ahmad, Shahrul Ainliah and Wong, Lu Shin (2019) Polymer pen lithography-fabricated DNA arrays for highly sensitive and selective detection of unamplified Ganoderma boninense DNA. Polymers, 11 (3). art. no. 561. pp. 1-12. ISSN 2073-4360

Chee, Siew Sand and Jawaid, Mohammad (2019) The effect of bi-functionalized MMT on morphology, thermal stability, dynamic mechanical, and tensile properties of epoxy/organoclay nanocomposites. Polymers, 11 (12). art. no. 2012. pp. 1-18. ISSN 2073-4360

Shafi, Ayu Rafiqah and Abdan, Khalina and Ahmad Saffian, Harmaen and Mohd Dahlan, Khairul Zaman and Jawaid, Mohammad and Lee, Ching Hao (2018) Effect of modified tapioca starch on mechanical, thermal, and morphological properties of PBS blends for food packaging. Polymers, 10 (11). pp. 1-13. ISSN 2073-4360

Alias, Aisyah Humaira and Md. Tahir, Paridah and Abdan, Khalina and Salit, Mohd Sapuan and Wahab, Md. Saidin and Berkalp, Omer Berk and Lee, Ching Hao and Lee, Seng Hua (2018) Effects of fabric counts and weave designs on the properties of laminated woven kenaf/carbon fibre reinforced epoxy hybrid composites. Polymers, 10 (12). art. no. 1320. pp. 1-19. ISSN 2073-4360

Tuan Naiwi, Tuan Syarifah Rossyidah and Aung, Min Min and Ahmad, Azizan and Rayung, Marwah and Su'ait, Mohd Sukor and Yusof, Nor Azah and Lae, Khine Zar Wynn (2018) Enhancement of plasticizing effect on bio-based polyurethane acrylate solid polymer electrolyte and its properties. Polymers, 10 (10). pp. 1-19. ISSN 2073-4360

Kunnan Singh, Jasbir Singh and Ching, Yern Chee and Abdullah, Luqman Chuah and Ching, Kuan Yong and Razali, Shaifulazuar and Seng, Neon Gan (2018) Optimization of mechanical properties for polyoxymethylene/glass fiber/polytetrafluoroethylene composites using response surface methodology. Polymers, 10 (3). pp. 1-25. ISSN 2073-4360

Ahmad, Ahmad Fahad and Ab. Aziz, Sidek and Abbas, Zulkifly and Obaiys, Suzan Jabbar and Khamis, Ahmad Mamoun and Hussain, Intesar Razaq and Mohd Zaid, Mohd Hafiz (2018) Preparation of chemically reduced graphene oxide reinforced Epoxy Resins polymer as a composite for electromagnetic interference shielding and microwave absorbing applicationns. Polymers, 10 (11). pp. 1-19. ISSN ESSN: 2073-4360

Gunathilake, T. M. S. Udenni and Ching, Yern Chee and Ching, Kuan Yong and Chuah, Cheng Hock and Abdullah, Luqman Chuah (2017) Biomedical and microbiological applications of bio-based porous materials: a review. Polymers, 9 (5). ISSN 2073-4360

Chieng, Buong Woei and Ibrahim, Nor Azowa and Then, Yoon Yee and Loo, Yuet Ying (2017) Epoxidized jatropha oil as a sustainable plasticizer to poly(lactic acid). Polymers, 9 (6). art. no. 204. pp. 1-10. ISSN 2073-4360

Abdul Rahman, Nur Hayati and Chieng, Buong Woei and Ibrahim, Nor Azowa and Abdul Rahman, Norizah (2017) Extraction and characterization of cellulose nanocrystals from tea leaf waste fibers. Polymers, 9 (11). art. no. 588. pp. 1-11. ISSN 2073-4360

Abdul Rahman, Nur Hayati and Chieng, Buong Woei and Ibrahim, Nor Azowa and Abdul Rahman, Norizah (2017) Extraction and characterization of cellulose nanocrystals from tea leaves waste fibers. Polymers, 9 (11). pp. 1-11. ISSN 2073-4360

Ahmad, Ahmad Fahad and Abbas, Zulkifly and Obaiys, Suzan J. and Abdalhadi, Daw M. (2017) Improvement of dielectric, magnetic and thermal properties of OPEFB fibre–polycaprolactone composite by adding Ni–Zn ferrite. Polymers, 9 (2). pp. 1-15. ISSN 2073-4360

Ghaemi, Ferial and Abdullah, Luqman Chuah and Tahir, Paridah (2016) Core/shell structure of Ni/NiO encapsulated in carbon nanosphere coated with few- and multi-layered graphene: synthesis, mechanism and application. Polymers, 8 (381). pp. 1-12. ISSN 2073-4360

Mhd Haniffa, Mhd Abd Cader and Ching, Yern Chee and Abdullah, Luqman Chuah and Poh, Sin Chew and Chuah, Cheng Hock (2016) Review of bionanocomposite coating films and their applications. Polymers, 8 (7). art. no. 246. pp. 1-33. ISSN 2073-4360

Mahmood Raouf, Raouf and Abdul Wahab, Zaidan and Ibrahim, Nor Azowa and Talib, Zainal Abidin and Buong, Woei Chieng (2016) Transparent blend of poly (Methylmethacrylate) / cellulose acetate butyrate for the protection from ultraviolet. Polymers, 8 (4). pp. 1-10. ISSN 2073-4360

Al-Hada, Naif Mohammed and Saion, Elias and Talib, Zainal Abidin and Shaari, Abdul Halim (2016) The impact of polyvinylpyrrolidone on properties of cadmium oxide semiconductor nanoparticles manufactured by heat treatment technique. Polymers, 8 (4). art. no. 113. pp. 1-15. ISSN 2073-4360

Boon, Khoon Tan and Yern, Chee Ching and Sin, Chew Poh and Chuah, Luqman and Seng, Neon Gan (2015) A review of natural fiber reinforced poly(Vinyl alcohol) based composites: application and opportunity. Polymers, 7 (11). pp. 2205-2222. ISSN 2073-4360

Chieng, Buong Woei and Ibrahim, Nor Azowa and Wan Yunus, Wan Md. Zin and Hussein, Mohd Zobir and Then, Yoon Yee and Loo, Yuet Ying (2014) Effects of graphene nanoplatelets and reduced graphene oxide on poly(lactic acid) and plasticized poly(lactic acid): a comparative study. Polymers, 6 (8). pp. 2232-2246. ISSN 2073-4360

Chieng, Buong Woei and Ibrahim, Nor Azowa and Wan Yunus, Wan Md. Zin and Hussein, Mohd Zobir (2014) Poly(lactic acid)/poly(ethylene glycol) polymer nanocomposites: effects of graphene nanoplatelets. Polymers, 6 (1). pp. 93-104. ISSN 2073-4360

Meftah, Abdo Mohammed Ali and Gharibshahi, Elham and Soltani, Nayereh and Mat Yunus, Wan Mahmood and Saion, Elias (2014) Structural, optical and electrical properties of nanocomposites of PVA/PANI/nickel nanoparticles synthesized by gamma radiolytic method. Polymers, 6 (9). pp. 2435-2450. ISSN 2073-4360

Saba, Naheed and Md. Tahir, Paridah and Jawaid, Mohammad (2014) A review on potentiality of nano filler/natural fiber filled polymer hybrid composites. Polymers, 6 (8). pp. 2247-2273. ISSN 2073-4360

Yusof, Nor Azah and Ab. Rahman, Siti Khadijah and Hussein, Mohd Zobir and Ibrahim, Nor Azowa (2013) Preparation and characterization of molecularly imprinted polymer as SPE sorbent for melamine isolation. Polymers, 5 (4). pp. 1215-1228. ISSN 2073-4360

Johari, Ili Syazana and Yusof, Nor Azah and Haron, Md Jelas and Mohd Nor, Siti Mariam (2013) Preparation and characterization of poly(ethyl hydrazide) grafted oil palm empty fruit bunch for removal of ni(ii) ion in aqueous environment. Polymers, 5 (3). pp. 1056-1067. ISSN 2073-4360