Items where Division is "Institute of Tropical Forestry and Forest Products" and Year is 2019

Ab. Latif, Farah Ezzah and Zainal Abidin, Zurina and Cardona, Francisco and Awang Biak, Dayang Radiah and Md. Tahir, Paridah and Abdan, Khalina and Liew, Kan Ern (2019) Physicochemical, structural and mechanical evaluation of bio-based epoxidized jatropha oil blended with amine-cured epoxy resin as new hybrid matrix. Journal of Engineering Science and Technology, 14 (2). pp. 1071-1087. ISSN 1823-4690

Abd Ghani, Muhammad Aizat and Bawon, Paiman and Lee, Seng Hua and Ashaari, Zaidon (2019) Physico-mechanical properties and formaldehyde emission of rubberwood particleboard made with UF resin admixed with ammonium and aluminium-based hardeners. Pertanika Journal of Science & Technology, 27 (1). pp. 473-488. ISSN 0128-7680; ESSN: 2231-8526

Abd Halip, Juliana and Lee, Seng Hua and Ashaari, Zaidon and Md Tahir, Paridah and Lum, Wei Chen and Uyup, Mohd Khairun Anwar (2019) Effect of treatment on water absorption behavior of natural fiber–reinforced polymer composites. In: Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites. Woodhead Publishing Series in Composites Science and Engineer . Woodhead Publishing, Kidlington, United Kingdom, 141 - 156. ISBN 9780081022924

Abd Murat, Noor Azammi and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan (2019) Structural modelling on automotive engine mounting from kenaf fiber reinfoced natural rubber/thermoplastic polyurethane green composites. International Journal of Recent Technology and Engineering, 8 (2 spec. 4). pp. 445-449. ISSN 2277-3878

Abdul Halip, Juliana and Lee, Seng Hua and Md. Tahir, Paridah and Osman Al-Edrus, Syeed SaifulAzry and Md Ishak, Siti Mastura and Selimin, Mohamad Ali and Ab Hamid, Abdullah Al Rashid (2019) Kenaf and kenaf-rubberwood hybrid particleboards. International Journal of Recent Technology and Engineering, 8 (2S4). pp. 464-468. ISSN 2277-3878

Abdul Khalid, Nur Nabilah and Ashaari, Zaidon and Mohd Hanif, Ahmad Husni and Mohamed, Azmy and Lee, Seng Hua (2019) Nitrogen deposition and release pattern of slow release fertiliser made from urea-impregnated oil palm frond and rubberwood chips. Journal of Forestry Research, 30 (6). pp. 2087-2094. ISSN 1007-662X; ESSN: 1993-0607

Abdul Rahman, Natrisya Nur and Rosli, Rozita and Kadzimin, Saleh and Hakiman, Mansor (2019) Effects of auxin and cytokinin on callus induction in Catharanthus roseus (L.) G. Don. Fundamental and Applied Agriculture, 4 (3). pp. 928-932. ISSN 2518-2021; ESSN: 2415-4474

Abed, Alaaeddin M. H. and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and E. S., Zainudin and Al-Oqla, Faris M. (2019) Lightweight and durable PVDF-SSPF composites for photovoltaics backsheet applications: thermal, optical and technical properties. Materials, 12 (13). art. no. 2104. pp. 1-19. ISSN 1996-1944

Abed, Alaaeddin M. H. and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams and Al-Oqla, Faris M. (2019) Development of photovoltaic module with fabricated and evaluated novel backsheet-based biocomposite materials. Materials, 12 (18). art. no. 3007. pp. 1-15. ISSN 1996-1944

Abed, Alaaeddin M. H. and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams and Al-Oqla, Faris M. (2019) Lightweight and durable PVDF–SSPF composites for photovoltaics backsheet applications: thermal, optical and technical properties. Materials, 12 (13). art. no. 2104. pp. 1-19. ISSN 1996-1944

Abed, Alaaeddin M. H. and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams and Al-Oqla, Faris M. (2019) Photovoltaic applications: status and manufacturing prospects. Renewable & Sustainable Energy Reviews, 102. pp. 318-332. ISSN 1364-0321; ESSN: 1879-0690

Abed, Alaaeddin M. H. and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams and Al-Oqla, Faris M. (2019) Polymer matrix materials selection for short sugar palm composites using integrated multi criteria evaluation method. Composites Part B: Engineering, 176. art. no. 107342. pp. 1-11. ISSN 1359-8368; ESSN: 1879-1069

Adeyi, Abel Adekanmi and Md. Jamil, Siti Nurul Ain and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Lau, Kia Li and Abdullah, Mohammad (2019) Adsorptive removal of methylene blue from aquatic environments using thiourea-modified poly(acrylonitrile-co-acrylic acid). Materials, 12 (11). art. no. 1734. pp. 1-17. ISSN 1996-1944

Adeyi, Abel Adekanmi and Md. Jamil, Siti Nurul Ain and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Lau, Kia Li and Abdullah, Mohammad (2019) Simultaneous adsorption of cationic dyes from binary solutions by thiourea-modified poly(acrylonitrile-co-acrylic acid): detailed isotherm and kinetic studies. Materials, 12 (18). art. no. 2903. pp. 1-20. ISSN 1996-1944

Afdzaluddin, Atiqah and Jawaid, Mohammad and Salit @ Sinon, Mohd Sapuan and Ishak, Mohamad Ridzwan (2019) Dynamic mechanical properties of sugar palm/glass fiber reinforced thermoplastic polyurethane hybrid composites. Polymer Composites, 40 (4). pp. 1329-1334. ISSN 0272-8397; ESSN: 1548-0569

Ahmad, Nurul Azwa and Bakar, Edi Suhaimi and Lee, Seng Hua and Ashaari, Zaidon (2019) Effects of pressing cycles and durations on the properties of compreg oil palm wood. Wood Material Science & Engineering, 14 (2). pp. 59-65. ISSN 1748-0272; ESSN: 1748-0280

Ahmad Farid, Mohammed Abdillah and Zakaria, Mohd Rafein and Hassan, Mohd Ali and Mohd Ali, Ahmad Amiruddin and Othman, Mohd Ridzuan and Ibrahim, Izzudin and Samsudin, Mohd Hafif and Shirai, Yoshihito (2019) A holistic treatment system for palm oil mill effluent by incorporating the anaerobic-aerobic-wetland sequential system and a convective sludge dryer. Chemical Engineering Journal, 369. pp. 195-204. ISSN 1385-8947

Ahmad Saffian, Harmaen and Kim, Hyun Joong and Md. Tahir, Paridah and Ibrahim, Nor Azowa and Lee, Seng Hua and Lee, Ching Hao (2019) Effect of lignin modification on properties of kenaf core fiber reinforced poly(butylene succinate) biocomposites. Materials, 12 (24). art. no. 4043. pp. 1-10. ISSN 1996-1944

Aik, Fei Ang and Ashaari, Zaidon and Seng, Hua Lee and Md Tahir, Paridah and Halis, Rasmina (2019) Lignin-based copolymer adhesives for composite wood panels – a review. International Journal of Adhesion and Adhesives, 95. art. no. 102408. pp. 1-12. ISSN 0143-7496

Al-Edrus, Syeed Saifulazry Osman and Md Tahir, Paridah and Abdullah, Luqman Chuah and Lee, Seng Hua and Ab Halip, Juliana and Rushdan, Ahmad Ilyas and Salit, Mohd Sapuan (2019) Degradation of medium density fibreboard and particleboard mechanical performance after exposed to different environmental condition. International Journal of Recent Technology and Engineering, 8 (2S4). pp. 528-532. ISSN 2277-3878

Alagapan, Tharani (2019) Sap flow density and hydraulic conductivity of three mature exotic forest species under similar planting condition. Masters thesis, Universiti Putra Malaysia.

Ali, Mahmood (2019) Conceptual design of bio-composite chair and desk based on anthropometric data. Doctoral thesis, Universiti Putra Malaysia.

Ali, Maru and Haruna, Ahmed Osumanu and Abd Majid, Nik Muhamad and Primus, Walter Charles and Asap, Audrey and Maikol, Nathaniel and Jeffary, Alicia Vanessa (2019) Mitigating ammonia volatilizatiion from waterlogged acids soils using organic amendments. Sustainable Agriculture Research, 8 (3). pp. 12-22. ISSN 1927-050X; ESSN: 1927-0518

Ali, Maru and Haruna, Ahmed Osumanu and Abd Majid, Nik Muhamad and Primus, Walter Charles and Maikol, Nathaniel and Asap, Audrey and Naharuddin, Aini Nadzirah and Jeffary, Alicia Vanessa (2019) Using soil water to control ammonia emission from acid soils with and without chicken litter biochar. Sustainable Agriculture Research, 8 (3). pp. 23-37. ISSN 1927-0518; ESSN: 1927-050X

Ali, Mohd Radzi (2019) Mechanical and thermal properties of thermoplastic polyurethane reinforced with roselle and sugar palm hybrid composites. Doctoral thesis, Universiti Putra Malaysia.

Ali, Mohd Radzi and Salit, Mohd Sapuan and Jawaid, Mohammad and Mansor, Muhd Ridzuan (2019) Effect of alkaline treatment on mechanical, physical and thermal properties of roselle/sugar palm fiber reinforced thermoplastic polyurethane hybrid composites. Fibers and Polymers, 20 (4). pp. 847-855. ISSN 1229-9197; ESSN: 1875-0052

Alias, Aisyah Humaira (2019) Assessment of kenaf as material for laminated woven kenaf/carbon fibre epoxy hybrid composites. Doctoral thesis, Universiti Putra Malaysia.

Alshammari, Basheer A. and Saba, Naheed and Alotaibi, Majed D. and Alotibi, Mohammed F. and Jawaid, Mohammad and Alothman, Othman Y. (2019) Evaluation of mechanical, physical, and morphological properties of epoxy composites reinforced with different date palm fillers. Materials, 12 (13). art. no. 2145. pp. 1-17. ISSN 1996-1944

Amir Mustafa, Amira Mas Ayu (2019) Inclusion of kenaf as bio-material component in sustainable manufacturing in Malaysian automotive industry. Doctoral thesis, Universiti Putra Malaysia.

Anamulai, Subasini and Sanusi, Ruzana and Zubaid, Akbar and Lechner, Alex Mark and Ashton-Butt, Adham and Azhar, Badrul (2019) Land use conversion from peat swamp forest to oil palm agriculture greatly modifies microclimate and soil conditions. PeerJ, 7. pp. 1-16. ISSN 2167-8359

Arbaain, Enis Natasha Noor and Kamal Bahrin, Ezyana and Ibrahim, Mohamad Faizal and Ando, Yoshito and Abd. Aziz, Suraini (2019) Biological pretreatment of oil palm empty fruit bunch by Schizophyllum commune ENN1 without washing and nutrient addition. Processes, 7 (7). art. no. 402. pp. 1-8. ISSN 2227-9717

Arockiam, Naveen Jesu and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and R., Yahaya (2019) Mechanical and moisture diffusion behaviour of hybrid Kevlar/Cocos nucifera sheath reinforced epoxy composites. Journal of Materials Research and Technology, 8 (1). pp. 1308-1318. ISSN 2238-7854

Ashaari, Zaidon and Lee, Seng Hua and Abdul Halip, Juliana and Al-Edrus, Syeed Saifulazry Osman and Lum, Wei Chen and Lee, Ching Hao (2019) Application of response surface methodology models for dimensional stability of hydrothermally treated Semantan bamboo. International Journal of Recent Technology and Engineering, 8 (2S4). pp. 460-463. ISSN 2277-3878

Basri, Ernnie Illyani and Basri, Adi Azriff and Abas, Mohd. Firdaus and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Ahmad, Kamarul Arifin (2019) UAV NACA4415 wing structural performance analysis subjected to external aerodynamic load using Schrenk’s approximation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (2). pp. 178-190. ISSN 2289-7879

Basri, Ernnie Illyani and Hameed Sultan, Mohamed Thariq and Mustapha, Faizal and Basri, Adi Azriff and Abas, Mohd Firdaus and Abdul Majid, Mohd Shukry and Mandeep, Jit Singh and Ahmad, Kamarul Arifin (2019) Performance analysis of composite ply orientation in aeronautical application of unmanned aerial vehicle (UAV) NACA4415 wing. Journal of Materials Research and Technology, 8 (5). pp. 3822-3834. ISSN 2238-7854

Bharath, K. N. and Sanjay, M. R. and Jawaid, Mohammad and Harisha and Basavarajappa, S. and Siengchin, Suchart (2019) Effect of stacking sequence on properties of coconut leaf sheath/jute/ E-glass reinforced phenol formaldehyde hybrid composites. Journal of Industrial Textiles, 49 (1). pp. 3-32. ISSN 1528-0837; ESSN: 1530-8057

Bobba, Sujith and Leman, Z. and S., M. Sapuan and Zainudin, E. S. (2019) Fluid flow and static structural analysis of E-glass versus S2-glass fiber/epoxy reinforced pipe joints. Agricultural Engineering International: CIGR Journal, 21 (4). pp. 56-63. ISSN 1682-1130

Bobba, Sujith and Leman, Zulkiflle and Zainuddin, Edi Syams and Sapuan, Mohd Sapuan (2019) Study of interior temperature distribution and implementation of smart materials In the truck cabin during summer conditions. Materials Today: Proceedings, 18 (pt.1). pp. 361-374. ISSN 2214-7853

Chandrasekar, Muthukumar and Ishak, Mohamad Ridzwan and Salit, Mohd Sapuan and Leman, Zulkiflle and Shahroze Ali, Rao Muhammad (2019) Effect of freezing temperature and stacking sequence on the mechanical properties of hybrid fibre metal laminates made with carbon, flax, and sugar palm fibres. BioResources, 14 (2). pp. 3042-3056. ISSN 1930-2126

Che'ya, Nik Norasma and Lee, Loong Shern and Ismail, Mohd Razi and Mohd Razali, Sheriza and Roslin, Nor Athirah and Omar, Mohamad Husni (2019) Development of rice growth map using the advanced remote sensing techniques. In: 2nd International Conference on Computer and Drone Applications (IConDA 2019), 19-21 Dec. 2019, UiTM Samarahan 2 Campus, Sarawak Branch, Malaysia. (pp. 23-28).

Chee, Siew Sand and Jawaid, Mohammad (2019) The effect of bi-functionalized MMT on morphology, thermal stability, dynamic mechanical, and tensile properties of epoxy/organoclay nanocomposites. Polymers, 11 (12). art. no. 2012. pp. 1-18. ISSN 2073-4360

Chee, Siew Sand and Jawaid, Mohammad and Hameed Sultan, Mohammed Thariq and Alothman, Othman Y. and Abdullah, Luqman Chuah (2019) Thermomechanical and dynamic mechanical properties of bamboo/woven kenaf mat reinforced epoxy hybrid composites. Composites Part B: Engineering, 163. pp. 165-174. ISSN 1359-8368; ESSN: 1879-1069

Chin, Kit Ling and Mohd Yaakob, Nurliyana and H'ng, Paik San and Lee, Chuan Li and Go, Wen Ze and Khoo, Pui San and Raja Nazrin, Raja Ahmad and Siti Nurul Ashikin (2019) Effects of bacterial bio-augmentation on the methane potential from facultative digestion of palm oil mill effluent and empty fruit bunch. Waste and Biomass Valorization, 11. pp. 3407-3418. ISSN 1877-2641; ESSN: 1877-265X

Chong, Leong Puan and Kok, Long Yeong and Kang, Woei Ong and Ahmad Fauzi, Muhd Izzat and Yahya, Muhammad Syafiq and Swee, Seng Khoo (2019) Influence of landscape matrix on urban bird abundance: evidence from Malaysian citizen science data. Journal of Asia-Pacific Biodiversity, 12. pp. 369-375. ISSN 2287-9544; ESSN: 2287-884X

Danial, Rabiatuladawiyah and Sobri, Shafreeza and Abdullah, Luqman Chuah and Mobarekeh, Mohsen Nourouzi (2019) FTIR, CHNS and XRD analyses define mechanism of glyphosate herbicide removal by electrocoagulation. Chemosphere, 233. pp. 559-569. ISSN 0045-6535; ESSN: 1879-1298

Das, Jadav and De, Debashis and Mondal, Sankar Prasad and Ahmadian, Ali and Ghaemi, Ferial and Senu, Norazak (2019) QCA based error detection circuit for nano communication network. IEEE Access, 7. pp. 67355-67366. ISSN 2169-3536

Dashtizadeh, Zahra and Khalina, Abdan and Cardona, Francisco and Lee, Ching Hao (2019) Mechanical characteristics of green composites of short kenaf bast fiber reinforced in cardanol. Advances in Materials Science and Engineering, 2019. art. no. 8645429. pp. 1-6. ISSN 1687-8434; ESSN: 1687-8442

Derahman, Aishah and Zainal Abidin, Zurina and Cardona, Francisco and Awang Biak, Dayang Radiah and Md. Tahir, Paridah and Abdan, Khalina and Liew, Kan Ern (2019) Epoxidation of jatropha methyl esters via acidic ion exchange resin: optimization and characterization. Brazilian Journal of Chemical Engineering, 36 (2). pp. 959-968. ISSN 0104-6632; ESSN: 1678-4383

Edi Syafri and Sudirman and Mashadi and Evi Yulianti and Deswita and Mochamad Asrofic and Hairul Abral and Salit, Mohd Sapuan and Ilyas, R. A. and Ahmad Fudholi (2019) Effect of sonication time on the thermal stability, moisture absorption, and biodegradation of water hyacinth (Eichhornia crassipes) nanocellulose-filled bengkuang (Pachyrhizus erosus) starch biocomposites. Journal of Materials Research and Technology, 8 (6). pp. 6223-6231. ISSN 2238-7854

Fauziyah, Nur Aini and Hilmi, Allif Rosyidy and Zainuri, Mochamad and Asrori, Mohamad Zainul and Mashuri, Mashuri and Jawaid, Mohammad and Pratapa, Suminar (2019) Thermal and dynamic mechanical properties of polyethylene glycol/quartz composites for phase change materials. Journal of Applied Polymer Science, 136 (42). pp. 2-10. ISSN 0021-8995; ESSN 1097-4628

Ghaemi, Ferial and Abdullah, Luqman Chuah and Ariffin, Hidayah (2019) Lignocellulose structure and the effect on nanocellulose production. In: Lignocellulose for Future Bioeconomy. Elsevier, Waltham, Massachusetts, 17 - 30. ISBN 9780128163542

Gheith, Mohamed Hamdy and Aziz, Mohamed Abdel and Ghori, Waheedullah and Saba, Naheed and Mohammad Asim and Jawaid, Mohammad and Alothman, Othman Y. (2019) Flexural, thermal and dynamic mechanical properties of date palm fibres reinforced epoxy composites. Journal of Materials Research and Technology, 8 (1). pp. 853-860. ISSN 2238-7854; ESSN: 2214-0697

Go, Wen Ze and H'ng, Paik San and Wong, Mui Yun and Chin, Kit Ling and Ujang, Salmiah and Noran, Aizat Shamin (2019) Evaluation of Trichoderma asperellum as a potential biocontrol agent against Rigidoporus microporus Hevea brasiliensis. Archives of Phytopathology and Plant Protection, 52 (7-8). pp. 639-666. ISSN 0323-5408; ESSN: 1477-2906

H. P. S., Abdul Khalil and Saurabh, Chaturbhuj Kumar and M. I., Syakir and M. R., Nurul Fazita and Bhat, Aamir H. and Banerjee, Aparajita and H. M., Fizree and Rizal, Samsul and M. Tahir, Paridah (2019) Barrier properties of biocomposites/hybrid films. In: Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composite. Woodhead Publishing, United Kingdom, 241 - 258. ISBN 9780081022924

H. P. Shawkataly, Abdul Khalil and Chong, E. W. N. and Taiwo, Owolabi Folahan Abdulwahab and Mustapha, Asniza and Tye, Ying Ying and Rizal, Samsul and M. R., Nurul Fazita and M. K., Mohamad Haafiz and Z., Nurmiati and Md. Tahir, Paridah (2019) Enhancement of basic properties of polysaccharide-based composites with organic and inorganic fillers: a review. Journal of Applied Polymer Science, 136 (12). pp. 1-21. ISSN 0021-8995; ESSN: 1097-4628

Hamdan, Nor Salwa and Salit, Mohd Sapuan and M. T., Mastura and Mohamed Yusoff, Mohd Zuhri (2019) Analytic hierarchy process (AHP) based materials selection system for natural fiber as reinforcement in biopolymer composites for food packaging. BioResources, 14 (4). pp. 10014-10036. ISSN 1930-2126

Hameed Sultan, Mohamed Thariq and Safri, Syafiqah Nur Azrie and Md. Shah, Ain Umaira and Jawaid, Mohammad and Lee, Seng Hua and Shahar, Farah Syazwani and Sivasankaran, Praveena Nair (2019) A review on the orthotics and prosthetics and the potential of kenaf composites as alternative materials for ankle-foot orthosis. Journal of the Mechanical Behavior of Biomedical Materials, 99. pp. 169-185. ISSN 1751-6161

Hamid, Norul Hisham and Wan Baderul Hisan, Wan Sulwani Izzati and Abdullah, Ummi Hani and Abdul Azim, Ammir Affan and Md. Tahir, Paridah (2019) Mechanical propereties and moisture absorption of epoxy composite mixed with amorphous and crystalline silica from rice husk. BioResources, 14 (3). pp. 7363-7374. ISSN 1930-2126

Hamidon, Muhammad Hafizal and Hameed Sultan, Mohamed Thariq and Ariffin, Ahmad Hamdan and Md Shah, Ain Umaira (2019) Effects of fibre treatment on mechanical properties of kenaf fibre reinforced composites: a review. Journal of Materials Research and Technology, 8 (3). pp. 3327-3337. ISSN 2238-7854

Hanafi, Shafinaz and Chong, Leong Puan and Maruthaveeran, Sreetheran and Kok, Loong Yeong (2019) Vocal response of oriental Magpie Robin (Copsychus saularis) to urban environmental factors in Peninsular Malaysia. Sains Malaysiana, 48 (10). pp. 2061-2069. ISSN 0126-6039; ESSN: 2735-0118

Harun, Hazimah Haspi and M. K., Mohamad Roslan and S., Nurhidayu and Ash’aari, Zulfa Hanan and Mohd Kusin, Faradiella (2019) Nutrient contaminant on monitoring wells in agricultural areas of Kuala Langat, Selangor. International Journal of Academic Research in Environment and Geography, 6 (1). pp. 1-13. ISSN 2313-769X

Hasan, M. and Chong, E. W. N. and Jafarzadeh, Shima and Md. Tahir, Paridah and Gopakumar, Deepu A. and Tajarudin, Husnul Azan and Thomas, Sabu and H. P. Shawkataly, Abdul Khalil (2019) Enhancement in the physico-mechanical functions of seaweed biopolymer film via embedding fillers for plasticulture application-a comparison with conventional biodegradable mulch film. Polymers, 11 (2). pp. 1-19. ISSN 2073-4360

Hasan, Muhammad and Chong, Eunice Wan Ni and Jafarzadeh, Shima and Md. Tahir, Paridah and Gopakumar, Deepu Ambika and Tajarudin, Husnul Azan and Thomas, Sabu and H. P. Shawkataly, Abdul Khalil (2019) Enhancement in the physico-mechanical functions of seaweed biopolymer film via embedding fillers for plasticulture application—a comparison with conventional biodegradable mulch film. Polymers, 11 (2). art. no. 210. pp. 1-19. ISSN 2073-4360

Hasan, Muhammad Luqman and Thoo, Poh Yee and Yee, Lai Ling and Johari, Shazali and Emang, Diana (2019) The strength of social capital of three local communities at Gunung Pueh National Park, Lundu, Sarawak. International Journal of Recent Technology and Engineering, 7 (5S). pp. 120-126. ISSN 2277-3878

Haspi Harun, Hazimah and M. K., Mohamad Roslan and S., Nurhidayu and Ash’aari, Zulfa Hanan and Mohd Kusin, Faradiella (2019) Hydrogeochemistry investigation on groundwater in Kuala Langat, Banting, Selangor. Bulletin of the Geological Society of Malaysia, 67. pp. 127-134. ISSN 0126-6187; ESSN: 2637-109X

Hossain, Mohammed Aktar and Islam, Mohammed Ashraful and Azad, Mohammed Abul Kalam and Rahman, Mohammad Mahfuzur and Shumi, Wahhida and Ab Shukor, Nor Aini (2019) Propagation of an endangered gymnosperm tree species (Podocarpus neriifolius D. Don.) by stem cuttings in non-mist propagator. Pertanika Journal of Tropical Agricultural Science, 42 (1). pp. 237-250. ISSN 1511-3701; ESSN: 2231-8542

Huck, Ywih Ch'ng and Haruna, Ahmed Osumanu and Nik Ab Majid, Nik Muhamad and Jalloh, Mohamadu Boyie (2019) Improving soil phosphorus availability and yield of Zea mays l. using biochar and compost derived from agro-industrial wastes. Italian Journal of Agronomy, 14 (1). pp. 34-42. ISSN 1125-4718; ESSN: 2039-6805

Ibraheem, Sameer Adnan and Abdan, Khalina and Lee, Ching Hao (2019) Simulation study for the compressed BMC materials of kenaf/coir reinforced unsaturated polyester: flow behaviour and the effects of charges shapes studies. Pertanika Journal of Science & Technology, 27 (S1). pp. 211-223. ISSN 0128-7680; ESSN: 2231-8526

Ibrahim, M. I. J. and Salit, Mohd Sapuan and Zainudin, E. S. and Mohamed Yusoff, Mohd Zuhri (2019) Extraction, chemical composition, and characterization of potential lignocellulosic biomasses and polymers from corn plant parts. BioResources, 14 (3). pp. 6485-6500. ISSN 1930-2126

Ibrahim, Mohamad Faizal and Mohamad, Nurshazana and Ramli, Norhayati and Abd Aziz, Suraini (2019) Comparison of hydro‑distillation, hydro‑distillation with enzyme‑assisted and supercritical fluid for the extraction of essential oil from pineapple peels. 3 Biotech, 9. art. no. 234. pp. 1-9. ISSN 2190-572X; ESSN: 2190-5738

Ibrahim Mohamed, Mohamed Yousif and Abdul Aziz, Saleha and Abu, Jalila and Bejo, Siti Khairani and Chong, Leong Puan and Bitrus, Asinamai Athliamai and Aliyu, Abdulrasheed Bello and Mohamed, Elmutaz Atta Awad (2019) Occurrence of antibiotic resistant campylobacter in wild birds and poultry. Malaysian Journal of Microbiology, 15 (2). pp. 143-151. ISSN 1823-8262; ESSN: 2231-7538

Ishak, Muhammad Ammar and Mohd Roslim, Muhammad Huzaifah and Salit @ Sinon, Mohd Sapuan and Leman, Zulkiflle (2019) Mechanical properties of environment-friendly sugar palm fibre reinforced vinyl ester composites at different fibre arrangements. EnvironmentAsia, 12 (1). pp. 25-35. ISSN 1906-1714; ESSN: 2586-8861

Isma'ila, Mukhtar and Leman, Zulkiflle and Zainudin, Edi Syams and Ishak, Mohamad Ridzwan (2019) Hybrid and nonhybrid laminate composites of sugar palm and glass fibre-reinforced polypropylene: effect of alkali and sodium bicarbonate treatments. International Journal of Polymer Science, 2019. art. no. 230592. pp. 1-12. ISSN 1687-9422; ESSN: 1687-9430

Ismail, Ahmad Safwan and Jawaid, Mohammad and Naveen, Jesuarockiam (2019) Void content, tensile, vibration and acoustic properties of kenaf/bamboo fiber reinforced epoxy hybrid composites. Materials, 12 (13). art. no. 2094. pp. 1-14. ISSN 1996-1944

Ismail, Faris Syahiran (2019) Characterization of oil palm empty fruit bunch fibres- microcrystalline cellulose for potential high mechanical strength paper. Masters thesis, Universiti Putra Malaysia.

Ismail, Khairul Izwan and Hameed Sultan, Mohamed Thariq and Md. Shah, Ain Umaira and Jawaid, Mohammad and Safri, Syafiqah Nur Azrie (2019) Low velocity impact and compression after impact properties of hybrid bio-composites modified with multi-walled carbon nanotubes. Composites Part B: Engineering, 163. pp. 455-463. ISSN 1359-8368; ESSN: 1879-1069

Ismail, Muhammad Faizzuddin and Hameed Sultan, Mohamed Thariq and Ariffin, Ahmad Hamdan and Md. Shah, Ain Umaira and Jawaid, Mohammad (2019) Low velocity impact behaviour and post-impact characteristics of kenaf/glass hybrid composites with various weight ratios. Journal of Materials Research and Technology, 8 (3). pp. 2662-2673. ISSN 2238-7854

Jesuarockiam, Naveen and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan (2019) Improved mechanical and moisture resistant properties of woven hybrid epoxy composites by graphene nanoplatelets (GNP). Materials, 12 (8). art. no. 1249. pp. 1-18. ISSN 1996-1944

Jesuarockiam, Naveen and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan and Abdul Majid, M. S. (2019) Thermal degradation and viscoelastic properties of Kevlar/Cocos nucifera sheath reinforced epoxy hybrid composites. Composite Structures, 219. pp. 194-202. ISSN 0263-8223; ESSN 1879-1085

Jia, Tian Chen and Chuah, Luqman Abdullah and Md. Tahir, Paridah (2019) Biomass valorization for better aviation environmental impact through biocomposites and aviation biofuel. In: Structural Health Monitoring of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites. Elsevier, United Kingdom, 19 - 31. ISBN 9780081022917

Kamaruddin, Norfaryanti and Mohd Razali, Sheriza and Samdin, Zaiton (2019) Environmental-friendly food products’ packaging: women’s purchasing preferences. International Journal of Recent Technology and Engineering, 8 (2 spec. 4). pp. 515-519. ISSN 2277-3878

Kamarudin, Siti Hasnah and Abdullah, Luqman Chuah and Aung, Min Min and Ratnam, Chantara Thevy (2019) Mechanical and physical properties of kenaf-reinforced poly(lactic acid) plasticized with epoxidized jatropha oil. BioResources, 14 (4). pp. 9001-9020. ISSN 1930-2126

Kamarudin, Siti Hasnah and Jusoh, Emiliana Rose and Abdullah, Luqman Chuah and Ismail, Mohd Halim Shah and Min, Min Aung and Ratnam, Chantara Thevy (2019) Thermal and dynamics mechanical analysis of polypropylene blown films with crude palm oil as plasticizer. Indonesian Journal of Chemistry, 19 (3). pp. 545-555. ISSN 1411-9420; ESSN: 2460-1578

Khairul, M. A. and Sapuan Faris, S. M. and Al-Oqla, F. M. and Zainudin, E. S. (2019) Experimental investigation and numerical prediction for the fatigue life durability of austenitic stainless steel at room temperature. Engineering Solid Mechanics, 7 (2). pp. 121-130. ISSN 2291-8744; ESSN: 2291-8752

Lau, Kia Kian (2019) Development and characterization of roselle (Hibiscus sabdariffa L.) nanocellulose-reinforced polylactic acid nanocomposite for water filtration. Doctoral thesis, Universiti Putra Malaysia.

Lee, Chuan Li and H'ng, Paik San and Chin, Kit Ling and Md Tahir, Paridah and Rashid, Umer and Go, Wen Ze (2019) Characterization of bioadsorbent produced using incorporated treatment of chemical and carbonization procedures. Royal Society Open Science, 6. pp. 1-17. ISSN 2054-5703

Lee, Fu Haw and Wan, Suet Ying and Foo, Hooi Ling and Loh, Teck Chwen and Mohamad, Rosfarizan and Abdul Rahim, Raha and Idrus, Zulkifli (2019) Comparative study of extracellular proteolytic, cellulolytic, and hemicellulolytic enzyme activities and biotransformation of palm kernel cake biomass by lactic acid bacteria isolated from Malaysian foods. International Journal of Molecular Sciences, 20 (20). art. no. 4979. pp. 1-26. ISSN 1661-6596; ESSN: 1422-0067

Lim, Ye Heng and Foo, Hooi Ling and Loh, Teck Chwen and Mohamad, Rosfarizan and Abdul Rahim, Raha and Idrus, Zulkifli (2019) Optimized medium via statistical approach enhanced threonine production by Pediococcus pentosaceus TL-3 isolated from Malaysian food. Microbial Cell Factories, 18 (125). pp. 1-19. ISSN 1475-2859

Lum, Wei Chen and Lee, Seng Hua and Ahmad, Zakiah and Abdul Halip, Juliana and Chin, Kit Ling (2019) Lignocellulosic nanomaterials for bonstruction and building applications. In: Industrial Applications of Nanomaterials. Elsevier, Netherlands, 423 - 439. ISBN 978-0-12-815749-7

M. J., Halimatul and Sapuan, Salit M. and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and R. A., Ilyas (2019) Water absorption and water solubility properties of sago starch biopolymer composite films filled with sugar palm particles. Polimery, 64 (9). pp. 27-35. ISSN 0032-2725

M. R., Sanjay and Siengchin, Suchart and Parameswaranpillai, Jyotishkumar and Jawaid, Mohammad and Pruncu, Catalin Iulian and Khan, Anish (2019) A comprehensive review of techniques for natural fibers as reinforcement in composites: preparation, processing and characterization. Carbohydrate Polymers, 207. pp. 108-121. ISSN 0144-8617; ESSN: 1879-1344

Mahamud, Siti Nur Atikah and Rushdan, Ahmad Ilyas and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams and Ibrahim, R. and Mohd Afdzaluddin, Atiqah and Nainar, Mohamed Ansari M. and Jumaidin, Ridhwan (2019) Degradation and physical properties of sugar palm starch/ sugar palm nanofibrillated cellulose bionanocomposite. Polimery, 64 (10). pp. 27-36. ISSN 0032-2725

Majeed, Khaliq and Ahmed, Ashfaq and Abu Bakar, Muhammad Saifullah and Mahlia, Teuku Meurah Indra and Saba, Naheed and Hassan, Azman and Jawaid, Mohammad and Hussain, Murid and Iqbal, Javed and Ali, Zulfiqar (2019) Mechanical and thermal properties of montmorillonite-reinforced polypropylene/rice husk hybrid nanocomposites. Polymers, 11 (10). art. no. 1557. pp. 1-14. ISSN 2073-4360

Marichelvam, Mariappan Kadarkarainadar and Jawaid, Mohammad and Khan, Mohammad Asim (2019) Corn and rice starch-based bio-plastics as alternative packaging materials. Fibers, 7 (4). art. no. 32. pp. 1-14. ISSN 2079-6439

Mat Saad, Mohd Faiz and Abdul Rahman, Nor'aini and Mohd Yusoff, Mohd Zulkhairi (2019) Hydrogen and methane production from co-digestion of food waste and chicken manure. Polish Journal of Environmental Studies, 28 (4). pp. 2805-2814. ISSN 1230-1485; ESSN: 2083-5906

Mazani, Norianti and Salit, Mohd Sapuan and Sanyang, Muhammed Lamin and A., Atiqah and R. A., Ilyas (2019) Design and fabrication of shoe shell from kenaf fibre reinforced unsaturated polymer composites. In: Lignocellulose for Future Bioeeconomy. Elsevier, United States, 315 - 332. ISBN 9780128163542; EISBN: 9780128166055

Md Shah, Ain Umaira and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad (2019) Sandwich-structured bamboo powder/glass fibre-reinforced epoxy hybrid composites – mechanical performance in static and dynamic evaluations. Journal of Sandwich Structures & Materials, 23 (1). pp. 1-17. ISSN 1099-6362; ESSN: 1530-7972

Md. Tahir, Paridah and Liew, Winnie Pui Pui and Lee, Shiou Yih and Ang, Aik Fei and Lee, Seng Hua and Mohamed, Rozi and Halis, Rasmina (2019) Diversity and characterization of lignocellulolytic fungi isolated from oil palm empty fruit bunch, and identification of influencing factors of natural composting process. Waste Management, 100 (1). pp. 128-137. ISSN 0956-053X

Mohamad, Nur Diyana and Ash'aari, Zulfa Hanan (2019) Modelling of prevailing water distribution network in Putrajaya, Malaysia. In: International Conference on Environmental Sustainability and Resource Security (IC-ENSURES 2019), 5-6 Nov. 2019, Kuala Lumpur, Malaysia. (pp. 294-298).

Mohamed, Johar (2019) Spatial and temporal effects on hydraulic conductance and other attributes of bamboo (Gigantochloa scortechinii Gamble). Doctoral thesis, Universiti Putra Malaysia.

Mohamed, Johar and Abdul Hamid, Hazandy and Nik Abdul Majid, Nik Muhamad and Nuruddin, Ahmad Ainuddin (2019) Screening of phytochemical compounds of Gigantochloa scortechinii bamboo rhizome. Journal of Applied Biological Sciences, 13 (2). pp. 113-127. ISSN 1307-1130; ESSN: 2146-0108

Mohamed, Johar and Abdul Hamid, Hazandy and Nuruddin, Ahmad Ainuddin and Nik Ab. Majid, Nik Muhamad (2019) Chemical attributes of Gigantochloa scortechinii bamboo rhizome in relation with hydraulic conductance. BioResources, 14 (4). pp. 8155-8173. ISSN 1930-2126

Mohamed, Johar and Abdul Hamid, Hazandy and Nuruddin, Ahmad Ainuddin and Nik Abdul Majid, Nik Muhamad (2019) Anatomical characteristics of Gigantochloa scortechinii bamboo rhizome in relation with hydraulic conductance. BioResources, 14 (4). pp. 9082-9099. ISSN 1930-2126

Mohamed Ariff, Azmah Hanim and Hashmi, M. S. J. and Brabazon, Dermot (2019) Voids in biocomposites and their hybrids: origin, effect on moisture absorption, and optical analysis. In: Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites. Woodhead Publishing Series in Composites Science and Engineering . Woodhead Publishing, United Kingdom, 193 - 212. ISBN 9780081022924

Mohd Nor, Diana and Ramli, Norhayati and Sharuddin, Siti Suhailah and Hassan, Mohd Ali and Mustapha, Nurul Asyifah and Ariffin, Hidayah and Sakai, Kenji and Tashiro, Yukihiro and Shirai, Yoshihito and Maeda, Toshinari (2019) Dynamics of microbial populations responsible for biodegradation during the full-scale treatment of palm oil mill effluent. Microbes and Environments, 34 (2). pp. 121-128. ISSN 1342-6311; ESSN: 1347-4405

Mohd Nor Munawar, Nur Sofeana Zulaika and Ishak, Mohamad Ridzwan and Shahroze Ali, Rao Muhammad and Jawaid, Mohammad and Mohamed Yusoff, Mohd Zuhri (2019) An investigation of the morphological and tensile properties of vacuum resin impregnated sugar palm fibers with various thermosetting resins. BioResources, 14 (3). pp. 5212-5223. ISSN 1930-2126

Mohd Radzi, Mohd Hafiezal and Abdan, Khalina and Zainal Abidin, Zurina and Md Deros, Mohd Azaman and Zin, Mohd Hanafee (2019) Thermal and flammability characteristics of blended jatropha bio-epoxy as matrix in carbon fiber–reinforced polymer. Journal of Composites Science, 3 (1). art. no. 6. pp. 1-13. ISSN 2504-477X

Mohd Roslim, Muhammad Huzaifah (2019) Development and characterisation of sugar palm [Arenga pinnata (Wurmb) Merr.] fibre reinforced vinyl ester composites. Doctoral thesis, Universiti Putra Malaysia.

Mohd Roslim, Muhammad Huzaifah and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan (2019) Comparative study of physical, mechanical, and thermal properties of sugar palm fiber (Arenga pinnata) reinforced vinyl ester composites obtained from different geographical locations. BioResources, 14 (1). pp. 619-637. ISSN 1930-2126

Mohd Saad, Nurul Atiqah and Gopakumar, Deepu A. and Taiwo, Owolabi Folahan Abdulwahab and Pottathara, Yasir Beeran and Rizal, Samsul and N. A., Sri Aprilia and Hermawan, Dede and Md. Tahir, Paridah and Thomas, Sabu and H. P. Shawkataly, Abdul Khalil (2019) Extraction of cellulose nanofibers via eco-friendly supercritical carbon dioxide treatment followed by mild acid hydrolysis and the fabrication of cellulose nanopapers. Polymers, 11 (11). art. no. 1813. pp. 1-14. ISSN 2073-4360

Mohd Yusof, Norwahyuni and Md Tahir, Paridah and Seng, Hua Lee and Khan, Mohammad Asim and Mohammad Suffian James, Redzuan (2019) Mechanical and physical properties of Cross-Laminated Timber made from Acacia mangium wood as function of adhesive types. Journal of Wood Science, 65. art. no. 20. pp. 1-11. ISSN 1435-0211; ESSN: 1611-4663

Mohd Yusof, Siti Jamilah Hanim and Roslan, Ahmad Muhaimin and Ibrahim, Khairul Nadiah and Syed Abdullah, Sharifah Soplah and Zakaria @ Mamat, Mohd Rafein and Hassan, Mohd Ali and Shirai, Yoshihito (2019) Life cycle assessment for bioethanol production from oil palm frond juice in an oil palm based biorefinery. Sustainability, 11 (24). art. no. 6928. pp. 1-14. ISSN 2071-1050

Muhammad, Noryani and Salit, Mohd Sapuan and Muhammad Taha, Mastura and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams (2019) Material selection of a natural fibre reinforced polymer composites using an analytical approach. Journal of Renewable Materials, 7 (11). pp. 1165-1179. ISSN 2164-6325; ESSN: 2164-6341

Muhammad Amir, Siti Madiha and Hameed Sultan, Mohamad Thariq and Jawaid, Mohammad and Md Shah, Ain Umaira and Ariffin, Ahmad Hamdan and Mohd, Shukri and Mohd Salleh, Khairul Anwar (2019) Water absorption associated with gamma irradiation on kevlar/oil palm EFB hybrid composites. International Journal of Recent Technology and Engineering, 8 (1s5). pp. 444-447. ISSN 2277-3878

Muhammad Amir, Siti Madiha and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Safri, Syafiqah Nur Azrie and Md Shah, Ain Umaira and Yusof, Mohd Ridzuan and Arockiam, Naveen Jesu and Mohd, Shukri and Salleh, Khairul A. M. and Saba, Naheed (2019) Effects of layering sequence and gamma radiation on mechanical properties and morphology of Kevlar/oil palm EFB/epoxy hybrid composites. Journal of Materials Research and Technology, 8 (6). pp. 5362-5373. ISSN 2238-7854

Muhd Julkapli, Halimatul Saadiah and Salit, Mohd Sapuan and Jawaid, Mohammad and Ishak, Mohamad Ridzwan and Ilyas, R. A. (2019) Effect of sago starch and plasticizer contents on thermoplastic sago films: mechanical and repeated soaking and drying test. Polimery, 64 (6). pp. 422-431. ISSN 0032-2725

Mustafa, Nuzaimah and Salit, Mohd Sapuan and Razali, Nadlene and Jawaid, Mohammad (2019) Microstructure and mechanical properties of unsaturated polyester composites filled with waste rubber glove crumbs. Fibers and Polymers, 20 (6). pp. 1290-1300. ISSN 1229-9197; ESSN: 1875-0052

N. A., Maisara Misman and Rushdan, Ahmad Ilyas and Salit, Mohd Sapuan and Mohd Roslim, Muhammad Huzaifah and Norizan, Mohd Nurazzi and Al-Edrus, Syeed Saifulazry Osman (2019) Effect of fibre length and sea water treatment on mechanical properties of sugar palm fibre reinforced unsaturated polyester composites. International Journal of Recent Technology and Engineering, 8 (2 spec. 4). pp. 510-514. ISSN 2277-3878

Nasir, Mohammed and Khali, D. P. and Jawaid, Mohammad and Tahir, P. M. and Siakeng, Ramengmawii and Asim, Mohammad and Ahmed Khan, Tanveer (2019) Recent development in binderless fiber-board fabrication from agricultural residues: a review. Construction and Building Materials, 211. pp. 502-516. ISSN 0950-0618

Naveen, Jesuarockiam and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan (2019) Enhanced thermal and dynamic mechanical properties of synthetic/natural hybrid composites with graphene nanoplateletes. Polymers, 11 (7). art. no. 1085. pp. 1-18. ISSN 2073-4360

Naveen, Jesuarockiam and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan (2019) Improved mechanical and moisture-resistant properties of woven hybrid epoxy composites by graphene nanoplatelets (GNP). Materials, 12 (8). art. no. 1249. pp. 1-18. ISSN 1996-1944

Negawo, Tolera A. and Polat, Yusuf and Buyuknalcaci, Feyza N. and Kilic, Ali and Saba, Naheed and Jawaid, Mohammad (2019) Mechanical, morphological, structural and dynamic mechanical properties of alkali treated Ensete stem fibers reinforced unsaturated polyester composites. Composite Structures, 207. pp. 589-597. ISSN 0263-8223

Nik Abd Rahman, Nik Mohd Afizan and M.Y., Nurliyana and Mohamed Noor Fuad, Natasha Nur Afiqah and Osman, Mohd Azuraidi and Hamid, Muhajir and Mohd Lila, Mohd Azmi (2019) Antitumor and antioxidant effects of Clinacanthus nutans Lindau in 4T1 tumor-bearing mice. BMC Complementary and Alternative Medicine, 19 (340). pp. 1-9. ISSN 2662-7671

Nor Mohamed, Sity Ainy and Zainudin, Edi Syams and Salit, Mohd Sapuan and Md Deros, Mohd Azaman and Tajul ariffin, Ahmad Mubarak (2019) Integration of taguchi-grey relational analysis technique in parameter process optimization for rice husk composite. BioResources, 14 (1). pp. 1110-1126. ISSN 1930-2126

Norizan, Mohd Nurazzi and Abdan, Khalina and Salit @ Sinon, Mohd Sapuan and Rushdan, Ahmad Ilyas (2019) Mechanical properties of sugar palm yarn/woven glass fiber reinforced unsaturated polyester composites: effect of fiber loadings and alkaline treatment. Polimery, 64 (10). pp. 665-675. ISSN 0032-2725

Noryani, Muhammad and Salit, Mohd Sapuan and Mastura, Mohammad Taha and Mohd Yusoff, Mohd Zuhri and Zainudin, Edi Syams (2019) Material selection of natural fibre using a stepwise regression model with error analysis. Journal of Materials Research and Technology, 8 (3). pp. 2865-2879. ISSN 2238-7854

Omale, Sunday Ogakwu and Choong, Thomas S. Y. and Abdullah, Luqman Chuah and Siajam, Shamsul Izhar and Yip, Mun W. (2019) Utilization of Malaysia EAF slags for effective application in direct aqueous sequestration of carbon dioxide under ambient temperature. Heliyon, 5 (10). pp. 1-8. ISSN 2405-8440

Osman Al-Edrus, Syeed Saifulazry and Md. Tahir, Paridah and Chuah, Teong Guan and Lee, Seng Hua and Ab Halip, Juliana and Lee, Ching Hao (2019) Particleboard manufactured from rubberwood RRIM 2002 clone planted with different fertilizer treatment. International Journal of Recent Technology and Engineering, 8 (2S4). pp. 398-402. ISSN 2277-3878

P., Manimaran and M. R., Sanjay and P., Senthamaraikannan and Jawaid, Mohammad and S. S., Saravanakumar and George, Raji (2019) Synthesis and characterization of cellulosic fiber from red banana peduncle as reinforcement for potential applications. Journal of Natural Fibers, 16 (5). pp. 768-780. ISSN 1544-0478; ESSN: 1544-046X

Palanivell, Perumal and Ahmed, Osumanu Haruna and Omar, Latifah and Nik Ab. Majid, Nik Muhamad (2019) Economic viability of including humic substances, chicken litter biochar, and clinoptilolite zeolite in rice cultivation on acid soils. Bulgarian Journal of Agricultural Science, 25 (1). pp. 79-96. ISSN 1310-0351

Radzi, A. M. and Sapuan, Salit M. and Jawaid, Mohammad and Mansor, Muhd Ridzuan (2019) Water absorption, thickness swelling and thermal properties of roselle/sugar palm fibre reinforced thermoplastic polyurethane hybrid composites. Journal of Materials Research and Technology, 8 (5). pp. 3988-3994. ISSN 2238-7854

Raja Ahmad, Raja Nazrin and H’ng, P. S. and Chin, K. L. (2019) Torrefaction treatment on fuel properties of bambusa vulgaris and Gigantochloa scorthecinii. International Journal of Recent Technology and Engineering, 8 (2S4). pp. 492-494. ISSN 2277-3878

Ramlee, Nor Azlina and Jawaid, Mohammad and Zainudin, Edi Syams and Yamani, Shaikh Abdul Karim (2019) Modification of oil palm empty fruit bunch and sugarcane bagasse biomass as potential reinforcement for composites panel and thermal insulation materials. Journal of Bionic Engineering, 16. pp. 175-188. ISSN 1672-6529; ESSN: 2543-2141

Rashid, Bushra and Leman, Zulkiflle and Mohammed, Aymen R. and Jawaid, Mohammad (2019) Mechanical and thermal properties of sugar palm fiber (Arenga pinnata)–reinforced phenolic composites. In: Sugar Palm Biofibers, Biopolymers, and Biocomposites. CRC Press, U.S.A, 129 - 143. ISBN 9781498753029; EISBN: 9780429443923

Rayney Azmi, Ahmad Mustafa and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Md Shah, Ain Umaira and Mohd Nor, Ariff Farhan and Abdul Majid, Mohd Shukry and Muhamad, Sallehuddin and Abu Talib, Abd. Rahim (2019) Impact properties of kenaf fibre/X-ray films hybrid composites for structural applications. Journal of Materials Research and Technology, 8 (2). pp. 1982-1990. ISSN 2238-7854; ESSN: 2044-5326

Rayung, Marwah and Aung, Min Min and Ahmad, Azizan and Su'ait, Mohd Sukor and Abdullah, Luqman Chuah and Md Jamil, Siti Nurul Ain (2019) Characteristics of ionically conducting jatropha oil-based polyurethane acrylate gel electrolyte doped with potassium iodide. Materials Chemistry and Physics, 222. pp. 110-117. ISSN 0254-0584; ESSN: 1879-3312

Riza, Samsul and H. M., Fizree and F. A. T., Owolabi and Gopakumar, Deepu A. and Mat Tahir, Paridah and Mohamad Kassim, Mohamad Haafiz and M. R. M., Fazita and Syakir, Muhammad Izzuddin and H. P. S., Abdul Khalil (2019) Utilization of agrowaste-derived nanoparticles as reinforcement in microfilled epoxy composites. BioResources, 14 (3). pp. 5365-5379. ISSN 1930-2126

Rushdan, Ahmad Ilyas (2019) Properties of sugar palm nanocellulose fibre-reinforced biopolymer composite. Doctoral thesis, Universiti Putra Malaysia.

Rushdan, Ahmad Ilyas and Salit, Mohd Sapuan and Ibrahim, Rushdan and Abral, Hairul and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams and Mahamud, S. N. Atikah and Norizan, Mohd Nurazzi and A., Atiqah and Ansari, M. N. M and Edi Syafri and Mochamad Asrofi and Nasmi Herlina Sari and Jumaidin, Ridhwan (2019) Effect of sugar palm nanofibrillated cellulose concentrations on morphological, mechanical and physical properties of biodegradable films based on agro-waste sugar palm (Arenga pinnata (Wurmb.) Merr) starch. Journal of Materials Research and Technology, 8 (5). pp. 4819-4830. ISSN 2238-7854

Saadun, Norzanalia and Mohd Noor, Khamurudin and Md Sharif, Badrul Azhar and Omar, Hishamuddin and Hariz, Mohd Husni (2019) Export performance of tropical timber products certified by the Malaysian Timber Certification Scheme. Journal of Sustainability Science and Management, 14 (5). pp. 115-127. ISSN 1823-8556

Saba, Naheed and Alothman, Othman Y. and Almutairi, Z. and Jawaid, Mohammad (2019) Magnesium hydroxide reinforced kenaf fibers/epoxy hybrid composites: mechanical and thermomechanical properties. Construction and Building Materials, 201. pp. 138-148. ISSN 0950-0618

Saba, Naheed and Jawaid, Mohammad and Alothman, Othman Y. and Almutairi, Zeyad (2019) Evaluation of dynamic properties of nano oil palm empty fruit bunch filler/epoxy composites. Journal of Materials Research and Technology, 8 (1). ISSN 2238-7854; ESSN: 2214-0697

Sabaruddin, Fatimah Athiyah (2019) Effects of lignin in nanocrystalline cellulose on mechanical, morphological and thermal properties of kenaf core-reinforced polypropylene composites. Doctoral thesis, Universiti Putra Malaysia.

Safri, Syafiqah Nur Azrie and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Abdul Majid, Mohd Shukry (2019) Analysis of dynamic mechanical, low-velocity impact and compression after impact behaviour of benzoyl treated sugar palm/glass/epoxy composites. Composite Structures, 226. art. no. 111308. pp. 1-8. ISSN 0263-8223; ESSN: 1879-1085

Sairy, Nur Aqilah and Mazlan, Norkhairunnisa and Ishak, Mohamad Ridzwan and Zulkepli, Nik Noriman (2019) Effect inclusion of graphene on the mechanical properties of polymer nanocomposites. International Journal of Recent Technology and Engineering, 8 (2 spec. 4). pp. 469-472. ISSN 2277-3878

Samdin, Zaiton and Kamaruddin, Norfaryanti (2019) The future of lignocellulose in Malaysian bioeconomy. In: Lignocellulose for Future Bioeconomy. Elsevier, Waltham, Massachusetts, 301 - 313. ISBN 9780128163542

Senthilkumar, Krishnasamy and Saba, Naheed and Chandrasekar, Muthukumar and Jawaid, Mohammad and Rajini, N. and Alothman, Othman Y. and Siengchine, Suchart (2019) Evaluation of mechanical and free vibration properties of the pineapple leaf fibre reinforced polyester composites. Construction and Building Materials, 195. pp. 423-431. ISSN 0950-0618

Shaharuzaman, Mohd Adrinata and Salit, Mohd Sapuan and Mansor, Muhd Ridzuan and Mohamed Yusoff, Mohd Zuhri (2019) Decision support strategy in selecting natural fiber materials for automotive side-door Impact beam composites. Journal of Renewable Materials, 17 (10). pp. 997-1010. ISSN 2164-6325; ESSN: 2164-6341

Shamsuri, Ahmad Adlie (2019) Important criteria for preparation of 3D printer filaments from polymer biocomposites. SVOA Materials Science and Technology, 1 (1). pp. 1-3.

Shamsuri, Ahmad Adlie (2019) Is the polymer orientation can influence the mechanical properties of thermoplastic composites? Global Journal of Materials Science and Engineering, 1 (1). pp. 1-2.

Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq (2019) Fatigue life prediction of textile/woven hybrid composites. In: Durability and Life Prediction in Biocomposites, Fibre- Reinforced Composites and Hybrid Composites. Woodhead Publishing Series in Composites Science and Engineering . Woodhead Publishing, United Kingdom, 63 - 82. ISBN 9780081022900

Shazali, Nur Aima Hafiza and Zaidi, Noorzaileen Eileena and Ariffin, Hidayah and Abdullah, Luqman Chuah and Ghaemi, Ferial and Abdullah, Jafri Malin and Takashima, Ichiro and Nik Abd Rahman, Nik Mohd Afizan (2019) Characterization and cellular internalization of spherical cellulose nanocrystals (CNC) into normal and cancerous fibroblasts. Materials, 12 (19). art. no. 3251. pp. 1-16. ISSN 1996-1944

Siakeng, Ramengmawii and Jawaid, Mohammad and Ariffin, Hidayah and Salit @ Sinon, Mohd Sapuan (2019) Mechanical, dynamic, and thermomechanical properties of coir/pineapple leaf fiber reinforced polylactic acid hybrid biocomposites. Polymer Composites, 40 (5). pp. 2000-2011. ISSN 0272-8397; ESSN: 1548-0569

Sobri, Zakiah (2019) Simultaneous synthesis and incorporation of zinc oxide particles in bamboo pulp through chemical and biological methods for antimicrobial paper. Masters thesis, Universiti Putra Malaysia.

Subramaniam, Thanam and Samdin, Zaiton and Ramachandran, Sridar and Kunasekaran, Puvaneswaran (2019) Memorable ecotourism experiences in Taman Negara, Pahang. International Journal of Recent Technology and Engineering, 7 (5S). pp. 25-33. ISSN 2277-3878

Syed Hassan, Sharifah Nur Atikah and Yahya, Muhammad Syafiq and Chong, Leong Puan and Zakaria, Mohamed and Azhar, Badrul (2019) Can forest associated nocturnal birds persist in oil palm agroecosystem? Ornithological Science, 18 (2). pp. 127-134. ISSN 1347-0558

Tan, Li Peng and Samsuddin, Ahmad Syazwan and Lee, Seng Hua (2019) Soil-borne entomopathogenic bacteria and fungi. In: Microbes for Sustainable lnsect Pest Management. Sustainability in Plant and Crop Protection, 1 . Springer, Switzerland, 23 - 41. ISBN 9783030230449; EISBN: 9783030230456

Tan, Peng Li and Sajap, Ahmad Said and Lee, Seng Hua and Hui, Sin Koh (2019) Evaluation of injury caused by lace bug, Cochlochila bullita (Stål) (Hemiptera: Tingidae) on Cat’s whiskers, Orthosiphon aristatus (Blume) Miq. and Sweet basil, Ocimum basilicum Linnaeus. International Journal of Tropical Insect Science, 39. pp. 17-24. ISSN 1742-7592

Thoo, Poh Yee and Johari, Shazali and Ismail, Mohd Hafizal and Yee, Lai Ling (2019) Understanding the role of memorable tourism experiences in loyalty at Giant Panda Conservation Centre, Zoo Negara Malaysia. International Journal of Recent Technology and Engineering, 7 (5S). pp. 63-68. ISSN 2277-3878

Thoo, Poh Yee and Johari, Shazali and Ismail, Mohd Hafizal and Yee, Lai Ling and Hasan, Muhammad Luqman (2019) The relationship between service quality and memorable tourism experience at Giant Panda Conservation Centre in Zoo Negara Malaysia. International Journal of Recent Technology and Engineering, 7 (5S). pp. 69-74. ISSN 2277-3878

Toe, Cui Jin and Foo, Hooi Ling and Loh, Teck Chwen and Mohamad, Rosfarizan and Abdul Rahim, Raha and Idrus, Zulkifli (2019) Extracellular proteolytic activity and amino acid production by lactic acid bacteria isolated from Malaysian foods. International Journal of Molecular Sciences, 20 (7). art. no. 1777. pp. 1-22. ISSN 1661-6596; ESSN: 1422-0067

Uyup, Mohd Khairun Anwar and Khadiran, Tumirah and Husain, Hamdan and Salim, Sabiha and Abdullah Siam, Nordahlia and Lee, Seng Hua (2019) Resistance improvement of rubberwood treated with zinc oxide nanoparticles and phenolic resin against white-rot fungi, Pycnoporus sanguineus. Maderas-Ciencia y Tecnologia, 21 (4). pp. 1-18. ISSN 0718-221X

Vijay, R. and Singaravelu, Lenin D. and Vinod, Arun and Sanjay, M. R. and Siengchin, Suchart and Jawaid, Mohammad and Khan, Anish and Parameswaranpillai, Jyotishkumar (2019) Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens. International Journal of Biological Macromolecules, 125. pp. 99-108. ISSN 0141-8130; ESSN: 1879-0003

W Mohamad, Wan Norhidayah and Willis, Ken and Powe, Neil (2019) Effect of different distributional assumption of random parameters in the mixed logit model on willingness-to-pay values. International Journal of Economics and Management, 13 (2). pp. 421-433. ISSN 1823-836X; ESSN: 2600-9390

Yahaya, Muhamad Afiq Faisal and Mohd Lila, Mohd Azmi and Ismail, Saila and Zainol, Muhammad Faisal and Nik Abd. Rahman, Nik Mohd Afizan (2019) Tumour-associated macrophages (TAMs) in colon cancer and how to reeducate them. Journal of Immunology Research, 2019. art. no. 2368249. pp. 1-9. ISSN 2314-8861; ESSN: 2314-7156

Yee, Lai Ling and Johari, Shazali and Emang, Diana and Thoo, Poh Yee and Hasan, Muhammad Luqman (2019) Motivational factors of women to become social entrepreneurs in Lundu district, Sarawak. International Journal of Recent Technology and Engineering, 7 (5S). pp. 75-81. ISSN 2277-3878

Zabaruddin, Nur Haryani and Mohamed, Nor Hasimah and Abdullah, Luqman Chuah and Tamada, Masao and Ueki, Yuji and Seko, Noriaki and Shean, Thomas Yaw Choong (2019) Palm oil-based biodiesel synthesis by radiation-induced kenaf catalyst packed in a continuous flow system. Industrial Crops and Products, 136. pp. 102-109. ISSN 0926-6690

Zahari, Nur Amirah Asifa Raisha (2019) Ultrasonic assisted extraction of thymol from Plectranthus amboinicus (Lour.) spreng leaves. Masters thesis, Universiti Putra Malaysia.

Zin, Mohd Hanafee (2019) Performance of pineapple leaf/glass fibre-reinforced vinyl ester composites utilizing automated spray up technique. Doctoral thesis, Universiti Putra Malaysia.

Zin, Mohd Hanafee and Abdan, Khalina and Mazlan, Norkhairunnisa and Zainudin, Edi Syams and Liew, Kan Ern (2019) The effect of different linear robot travel speed on mass flowrate of pineapple leaf fibre (PALF) automated spray up composite. Composites Part B: Engineering, 156 (1). pp. 220-228. ISSN 1879-1069

Zin, Mohd Hanafee and Abdan, Khalina and Mazlan, Norkhairunnisa and Zainudin, Edi Syams and Liew, Kan Ern and Norizan, Mohd Nurazzi (2019) Automated spray up process for pineapple leaf fibre hybrid biocomposites. Composites Part B: Engineering, 177. pp. 1-9. ISSN 1359-8368; ESSN: 1879-1069

Zulkifli, Ahmad Aiman and Mohd Yusoff, Mohd Zulkhairi and Abd Manaf, Latifah and Zakaria @ Mamat, Mohd Rafein and Roslan, Ahmad Muhaimin and Ariffin, Hidayah and Shirai, Yoshihito and Hassan, Mohd Ali (2019) Assessment of municipal solid waste generation in Universiti Putra Malaysia and its potential for green energy production. Sustainability, 11 (14). art. no. 3909. pp. 1-15. ISSN 2071-1050