Items where Author is "Mohd Ariffin, Mohd Khairol Anuar "

Alrashidi, Ahmed M. R. N. and Adam, Nor Mariah and Mohd Ariffin, Mohd Khairol Anuar and Fnyees, Alajmi and Naser, Alrashidi and Abdul Aziz, Hairuddin (2022) Impact of plasma combustion technology on micro gas turbines using biodiesel fuels. Applied Sciences, 12 (9). art. no. 4321. pp. 1-21. ISSN 2076-3417

Masalha, Ismail and Masuri, Siti Ujila and Badran, Omar and Mohd Ariffin, Mohd Khairol Anuar and Abi Talib, Abd Rahim and Alfaqs, Fadi (2022) Theoretical and experimental study on the performance of photovoltaic using porous media cooling under indoor condition. International Journal of Renewable Energy Development, 12 (2). pp. 313-327. ISSN 2252-4940

Al-Zubaidi, Razi and Mohd Ariffin, Mohd Khairol Anuar and Abdulsamad, Akram and Raqee, Ali and Ismail, Mohd Idris Shah and Ahmad, Kamarul Arifin (2022) The effect of self-efficacy on sustainable development: the PetroMasila in Yemen. Advances in Social Sciences Research Journal, 9 (12). 35 - 49. ISSN 2055-0286

Syed Abdullah, Syed Ahmad Saufi and Mohamed Yusoff, Mohd Zuhri and Mohammad Reza, Lalegani Dezaki and Salit, Mohd Sapuan and R. A., Ilyas and As'arry, Azizan and Mohd Ariffin, Mohd Khairol Anuar and M., Bodaghi (2021) Compression behaviour of bio-inspired honeycomb reinforced starfish shape structures using 3D printing technology. Polymers, 13 (24). pp. 1-17. ISSN 2073-4360

Albogami, Saad M. and Mohd Ariffin, Mohd Khairol Anuar and Supeni, Eris Elianddy and Ahmad, Kamarul Arifin (2021) Development of a hybrid AHP and Dempster-Shafer theory of evidence for project risk assessment problem. Journal of Project Management, 7. pp. 77-94. ISSN 2371-8366; ESSN: 2371-8374

Mohd Nor, N. A. and Baharudin, B. T. Hang Tuah and Ghani, G. A. and Mohd Ariffin, Mohd Khairol Anuar and Leman, Zulkiflle and Ismail, Nazarul Abidin and A., Ginting (2021) Effect of increasing spindle speed at a constant chip load on cutting force behaviour of Hastelloy X. International Journal of Automotive and Mechanical Engineering, 18 (2). 8658 - 8667. ISSN 2229-8649; ESSN: 2180-1606

Masoud, Fathi and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Nukman, Y. and Bayraktar, Emin (2021) Experimental analysis of heat-affected zone HAZ in laser cutting of sugar palm fiber reinforced unsaturated polyester composites. Polymers, 13 (5). pp. 1-13. ISSN 2073-4360

Masoud, Fathi and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Nukman, Y. and Bayraktar, Emin (2021) Experimental analysis of kerf taper angle in cutting process of sugar palm fiber reinforced unsaturated polyester composites with laser beam and abrasive water jet cutting technologies. Polymers, 13 (15). pp. 1-24. ISSN 2073-4360

Mad Ali, Mohd Fahmi and Mohd Ariffin, Mohd Khairol Anuar and Mustapha, Faizal and Supeni, Eris Elianddy (2021) An unsupervised machine learning-based framework for transferring local factories into supply chain networks. Mathematics, 9 (23). art. no. 3114. pp. 1-31. ISSN 2227-7390

Abdul Aziz, Faieza and S.M.A Alsaeed, Adel and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Al-Hakim, Muhammad Faris (2020) Mixed reality improves education and training in assembly processes. Journal of Engineering and Technological Sciences, 52 (4). 598 - 607. ISSN 2337-5779; ESSN: 2338-5502

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2020) Crossing weighted uncertainty scenarios assisted distribution-free metamodel-based robust simulation optimization. Engineering with Computers, 36 (1). 139 - 150. ISSN 0177-0667; ESSN: 1435-5663

Masoud, Fathi and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Y., Nukman and Bayraktar, Emin (2020) Cutting processes of natural fiber reinforced polymer composites. Polymers, 12 (6). art. no. 1332. pp. 1-17. ISSN 2073-4360

Al-Ajmi, Mohammad and Muda, Mohd Khairul Hafiz and Abdul Halin, Izhal and Mustapha, Faizal and Mohd Ariffin, Mohd Khairol Anuar (2020) Design of true hybrid solar wind turbine for smaller hybrid renewable energy power plants. Journal of Engineering and Technological Sciences, 52 (6). 881 - 890. ISSN 2337-5779

Mohd Nor, Nor Aznan and Baharudin, B. T. Hang Tuah and Ghani, Jaharah and Leman, Zulkiflle and Mohd Ariffin, Mohd Khairol Anuar (2020) Effect of chip load and spindle speed on cutting force of Hastelloy X. Journal of Mechanical Engineering and Sciences, 14 (1). 6497 - 6503. ISSN 2289-4659; ESSN: 2231-8380

Lalegani Dezaki, Mohammadreza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2020) Effects of CNC machining on surface roughness in Fused Deposition Modelling (FDM) products. Materials, 13 (11). pp. 1-28. ISSN 1996-1944

Baara, Wisam Ali Basher and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2019) Effect of elastic module degradation measurement in different sizes of the nonlinear isotropic–kinematic yield surface on springback prediction. Metals, 9 (5). art. no. 511. pp. 1-12. ISSN 2075-4701

Dehghan, Shayan and Ismail, Mohd Idris Shah and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T. Hang Tuah and Parnianifard, Amir (2019) Experimental Investigation on Friction Drilling of Stainless Steel AISI 304. International Journal of Machining and Machinability of Materials, 21 (4). pp. 279-299. ISSN 1748-5711; ESSN: 1748-572X

Dehghan, Shayan and Ismail, Mohd Idris Shah and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2019) Friction drilling of difficult-to-machine materials: workpiece microstrutural alterations and tool wear. Metals, 9 (9). art. no. 945. pp. 1-14. ISSN 2075-4701

Dehghan, Shayan and Ismail, Mohd Idris Shah and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2019) Friction drilling of difficult-to-machine materials: workpiece microstructural alterations and tool wear. Metals, 9 (9). art. no. 945. pp. 1-14. ISSN 2075-4701

Raidah, Rami Ba and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Supeni, Eris Elianddy (2019) Improving quality management methods in manufacturing SMEs: a conceptual framework. International Journal of Advanced Science and Technology, 28 (10). pp. 300-307. ISSN 2005-4238; ESSN: 2207-6360

Ismail, Nazarul Abidin and Ismail, Mohd Idris Shah and Mohd Radzman, Mohamad Aizat and Mohd Ariffin, Mohd Khairol Anuar and As'arry, Azizan (2019) Parametric optimization of robot-based single point incremental forming using Taguchi method. International Journal of Integrated Engineering, 11 (1). pp. 217-224. ISSN 2229-838X; ESSN: 2600-7916

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah and Ebrahim, Nader Ale (2019) Recent developments in metamodel based robust black-box simulation optimization: an overview. Decision Science Letters, 8 (1). pp. 17-44. ISSN 1929-5804; ESSN: 1929-5812

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2019) Trade-off in robustness, cost and performance by a multi-objective robust production optimization method. International Journal of Industrial Engineering Computations, 10 (1). pp. 133-148. ISSN 1923-2926; ESSN: 1923-2934

Mohd Ariffin, Mohd Khairol Anuar and Rezanoori, Alireza and Zulkefli, Zamir Aimaduddin and Abdul Jalil, Nawal Aswan and Delgoshaei, Aidin (2019) A new method to improve passenger vehicle safety using intelligent functions in active suspension system. Engineering Solid Mechanics, 7 (4). pp. 313-330. ISSN 2291-8744; ESSN: 2291-8752

Wahid, Zaliha and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Mustapha, Faizal and Ismail, Mohd Idris Shah (2019) A study on properties of polymer-based additive manufacturing. Jurnal Kejuruteraan, 31 (1). pp. 93-98. ISSN 0128-0198; ESSN: 2289-7526

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah and Maghami, Mohammad Reza and Gomes, Chandima (2018) Kriging and Latin hypercube sampling assisted simulation optimization in optimal design of PID controller for speed control of DC motor. Journal of Computational and Theoretical Nanoscience, 15 (5). 1471 - 1479. ISSN 1546-1955; ESSN: 1546-1963

Abdulshaheed, Ali Mohammed Ali and Mustapha, Faizal and Mohd Ariffin, Mohd Khairol Anuar (2018) Pipe material effect on water network leak detection using a pressure residual vector method. Journal of Water Resources Planning and Management, 144 (4). pp. 1-15. ISSN 0733-9496; ESSN: 1943-5452

Dalef, Huda Hatam and Abdul Aziz, Faieza and Wan Hasan, Wan Zuha and Mohd Ariffin, Mohd Khairol Anuar (2018) Controlling of robot hand by using microcontroller with visual basic. Journal of Computational and Theoretical Nanoscience, 15 (2). 648 - 655. ISSN 1546-1955; ESSN: 1546-1963

Dalef, Huda Hatem and Abdul Aziz, Faieza and Wan Hasan, Wan Zuha and Mohd Ariffin, Mohd Khairol Anuar (2018) Development of wireless controlling and monitoring system for robotic hand using Zigbee protocol. Journal of Computational and Theoretical Nanoscience, 15 (2). 656 - 662. ISSN 1546-1955; ESSN: 1546-1963

Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah and Sukindar, Nor Aiman (2018) Analysis of mechanical properties of polylactic acid using a new 3D printer nozzle. Journal of Computational and Theoretical Nanoscience, 15 (2). 666 - 675. ISSN 1546-1955; ESSN: 1546-1963

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2018) Effects of nozzle die angle on extruding polymethylmethacrylate in open-source 3D printing. Journal of Computational and Theoretical Nanoscience, 15 (2). 663 - 665. ISSN 1546-1955; ESSN: 1546-1963

Dehghan, Shayan and Ismail, Mohd Idris Shah and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T. Hang Tuah (2018) Experimental investigation on friction drilling of titanium alloy. Engineering Solid Mechanics, 6 (2). 135 - 142. ISSN 2291-8744; ESSN: 2291-8752

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2018) Kriging-assisted robust black-box simulation optimization in direct speed control of DC motor under uncertainty. IEEE Transactions on Magnetics, 54 (7). pp. 1-9. ISSN 0018-9464

Al-Affendi, Andy and Mohd Ariffin, Mohd Khairol Anuar (2018) Review of Earned Value Management (EVM) tool for project management. International Journal of Engineering Research and Reviews, 6 (3). pp. 4-10. ISSN 2348-697X

Hatam, Huda and Abdul Aziz, Faieza and Wan Hasan, Wan Zuha and Mohd Ariffin, Mohd Khairol Anuar (2017) Real time wireless monitoring and controlling of 3-D single point incremental tool. Journal of Computational and Theoretical Nanoscience, 14 (9). 4586 - 4596. ISSN 1546-1955; ESSN: 1546-1963

Askarizadeh, Mehdi and Abdul Aziz, Faieza and Mohd Ariffin, Mohd Khairol Anuar and Ahmad, Siti Azfanizam (2017) Operating rooms planning and scheduling with mix integer programming and meta-heuristic method. International Journal of Mechanical Engineering and Applications, 5 (4-1). 14 - 19. ISSN 2330-023X; ESSN: 2330-0248

Parnianifard, Amir and Ahmad, Siti Azfanizam and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2017) An overview on robust design hybrid metamodeling: Advanced methodology in process optimization under uncertainty. International Journal of Industrial Engineering Computations, 9 (1). pp. 1-32. ISSN 1923-2926; ESSN: 1923-2934

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Evaluation on the process parameters influencing the surface texture using open-source 3D printing. In: International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016), 28-30 Aug. 2016, Kuala Lumpur, Malaysia. (pp. 127-128).

Darmawan, Rosli and Adam, Nor Mariah and Abdul Aziz, Nuraini and Mohd Ariffin, Mohd Khairol Anuar (2016) Investigation on alternative methods to enhance the cooling capacity of an open pool reactor. In: International Nuclear Science, Technology and Engineering Conference 2016 (NuSTEC2016), 8-10 Aug. 2016, Selangor, Malaysia. (pp. 1-11).

Sayuti, M. and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar (2016) Metal matrix composite products by vibration casting method. In: Reference Module in Marerials Science and Material Engineering. Elsevier, United Kingdom, pp. 1-29. ISBN 9780128035818

Mohammad, Rosdi and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Mustapha, Faizal and Aoyama, Hideki (2016) Optimization of tool geometry design: the effects on surface roughness. In: International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016), 28-30 Aug. 2016, Kuala Lumpur, Malaysia. (pp. 129-130).

Delgoshaei, Aidin and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2016) Pre-emptive resource-constrained multimode project scheduling using genetic algorithm: a dynamic forward approach. Journal of Industrial Engineering and Management, 9 (3). pp. 732-785. ISSN 2013-8423; ESSN: 2013-0953

Hazmin, Mohd Haniff and Mustapha, Faizal and Mohd Ariffin, Mohd Khairol Anuar and Abdul Halin, Izhal (2016) Waterwheel fin design and its efficiency for a diversion-based hydropower system in Malaysian rivers. In: 13th Universiti Malaysia Terengganu International Annual Symposium on Sustainability Science and Management (UMTAS 2016), 13-15 Dec. 2016, Primula Beach Hotel, Kuala Terengganu. (pp. 342-348).

Ahmad, Siti Azfanizam and Mazli, Muhammad Nur Ikhwan and Mohd Ariffin, Mohd Khairol Anuar (2016) A mechanical design of power generator using door openings for household use. In: 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES 2016), 14-16 Nov. 2016, Putrajaya, Malaysia. (pp. 283-288).

Fatchurrohman, Nanang and Sulaiman, Shamsuddin and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2015) Analysis of a metal matrix composites automotive component. International Journal of Automotive and Mechanical Engineering, 11. pp. 2531-2540. ISSN 2229-8649; ESSN: 2180-1606

Tamjidy, Mehran and Paslar, Shahla and Baharudin, B. T. Hang Tuah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar (2015) Biogeography based optimization (BBO) algorithm to minimise non-productive time during hole-making process. International Journal of Production Research, 53 (6). pp. 1880-1894. ISSN 0020-7543; ESSN: 1366-588X

Mohd Ariffin, Mohd Khairol Anuar and Ahmad, Siti Azfanizam and Tang, Sai Hong and S., Mojtaba Zabihinpour (2015) Construction of fuzzy X-S control charts with an unbiased estimation of standard deviation for a triangular fuzzy random variable. Journal of Intelligent and Fuzzy Systems, 28. pp. 2735-2747. ISSN 1875-8967; ESSN: 1064-1246

Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Leman, Zulkiflle and Delgoshaei, Aidin (2015) Minimizing makespan of a resource-constrained scheduling problem: a hybrid greedy and genetic algorithms. International Journal of Industrial Engineering Computations, 6 (4). pp. 503-520. ISSN 1923-2934; ESSN: 1923-2926

Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Magid, Hani Mizhir (2015) Modelling and simulation of hollow profile aluminium extruded product. Applied mechanics and Materials, 761. pp. 17-21. ISSN 1660-9336

Sulaiman, Shamsuddin and Leman, Zulkifle and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Man, Shamsudin (2015) Process parameters for cylindrical deep drawing components. Advances in Materials and Processing Technologies, 1 (3-4). pp. 542-548. ISSN 2374-068X; ESSN: 2374-0698

Mansol, M. M. and Ismail, N. I. and Mahamad Basri, Mahamad Hisyam and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar (2014) Analysis of thin walled tube Al 3003 H12 under quasi-static axial crush mode using finite element method. ESTEEM Academic Journal, 10 (1). pp. 22-30. ISSN 1675-7939; ESSN: 2289-4934

Mohd Ariffin, Mohd Khairol Anuar and Kamaluddin, Rohaya and Tang, Sai Hong and Mohamed, Saiful Bahri (2014) Analysis of automated G-clip machine processes and substation process with simulation by using CAD software. Materials Science Forum, 773-774. pp. 28-36. ISSN 0255-5476; ESSN: 1662-9752

Yusof, N. S. B. and Mohd Rafie, Azmin Shakrine and Mohd Ariffin, Mohd Khairol Anuar and Othman, Nordin (2014) Computational analysis of the groove effect to reduce the cavitation in ball valves. Applied Mechanics and Materials, 629. pp. 414-419. ISSN 1660-9336; ESSN: 1662-7482

Firoozi, Zahra and Ismail, Napsiah and Ariafar, Shahram and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Memariani, Azizollah (2014) Cost analysis of two different configurations for a distribution network design. Applied Mechanics and Materials, 564. pp. 656-660. ISSN 1660-9336; ESSN: 1662-7482

Mohd Ariffin, Mohd Khairol Anuar and Tan, Yee Lee and Mohamed, Saiful Bahri (2014) Design improvement of automatic transmission system for remote controlled car. Applied Mechanics and Materials, 564. pp. 25-30. ISSN 1660-9336; ESSN: 1662-7482

Mohd Ariffin, Mohd Khairol Anuar and Che Hussain, Hazami and Mohamed, Saiful Bahri and Sulaiman, Shamsuddin (2014) Determining optimum electro discharge machining parameters for drilling of a small hole by utilizing Taguchi method. Applied Mechanics and Materials, 564. pp. 481-487. ISSN 1660-9336; ESSN: 1662-7482

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2014) Effect of machining process on surface microhardness of titanium carbide reinforced aluminium LM6 composite. Applied Mechanics and Materials, 564. pp. 495-500. ISSN 1660-9336; ESSN: 1662-7482

Firoozi, Zahra and Ismail, Napsiah and Ariafar, Shahram and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Mamariani, A. (2014) Effects of integration on the cost reduction in distribution network design for perishable products. Mathematical Problems in Engineering, 2014. art. no. 739741. pp. 1-10. ISSN 1024-123X; ESSN: 1563-5147

Magid, Hani Mizhir and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2014) Enhancement and improvement of the mechanical properties of aluminum extruded products by mathematical analysis and simulation process. In: International Conference on Mathematics, Engineering and Industrial Applications 2014 (ICoMEIA 2014), 28-30 May 2014, Penang, Malaysia. (pp. 1-8).

Sreenivasan, Subramaniasarma and Ibraheem, Sameer Adnan and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Abdan, Khalina (2014) Evaluation of combined treatments of natural fibers: kenaf, abaca and oil palm fibers using micromechanical and SEM methods. Advanced Materials Research, 912-914. pp. 1932-1939. ISSN 1022-6680; ESSN: 1662-8985

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2014) Experimental investigation on surface roughness and tool wear in dry machining of TiC reinforced aluminium LM6 composite. Materials Science Forum, 773-774. pp. 339-347. ISSN 0255-5476; ESSN: 1662-9752

Mohd Ariffin, Mohd Khairol Anuar and Sulaiman, Shamsuddin and Mohd Ruslan, Mohd Shahfizal (2014) Finite element analysis of sheet metal formability effect on automotive part. Applied Mechanics and Materials, 660. pp. 788-793. ISSN 1660-9336; ESSN: 1662-7482

Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Roshan Zamir, Amir Sayah (2014) Finite element modeling of the effect of tool rake angle on cutting force and tool temperature during high speed machining of AISI 1045 steel. Advanced Materials Research, 939. pp. 194-200. ISSN 1022-6680; ESSN: 1662-8985

Jahromi, Seyed Mojtaba Zabihinpour and Mohd Ariffin, Mohd Khairol Anuar and Tang, Sai Hong and Ahmad, Siti Azfanizam (2014) Fuzzy based approach for monitoring the mean and range of the products quality. Journal of Applied Environmental and Biological Sciences, 4 (9). pp. 1-7. ISSN 2090-4274; ESSN: 2090-4215

Jahromi, Seyed Mojtaba Zabihinpour and Mohd Ariffin, Mohd Khairol Anuar and Tang, Sai Hong and Ahmad, Siti Azfanizam and Hassani, Omid Boyer (2014) Fuzzy mean and range control charts for monitoring fuzzy quality characteristics: a case study in food industries using chicken nugget. In: 2014 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2014), 9-12 Dec. 2014, Bandar Sunway, Selangor. (pp. 759-763).

Golestaneh, Seyed Jafar and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar and Tang, Sai Hong and Naeini, Hassan Moslemi and Maghsoudi, Ali Asghar and Firoozi, Zahra (2014) Higher desirability in solving multiple response optimization problems with committee machine. Applied Mechanics and Materials, 564. pp. 608-613. ISSN 1660-9336; ESSN: 1662-7482

Rosli, Mohd Uzair and Mohd Ariffin, Mohd Khairol Anuar and Salit, Mohd Sapuan and Sulaiman, Shamsuddin (2014) Integrated TRIZ-AHP support system for conceptual design. Applied Mechanics and Materials, 548-549. pp. 1998-2002. ISSN 1660-9336; ESSN: 1662-7482

Menhat, Masha Nur Salsabiela and Mohd Ariffin, Mohd Khairol Anuar and Sulaiman, Shamsuddin and Tang, Sai Hong (2014) Managing uncertainty in supply chain management of vessel chartering in oil & gas industry. Applied Mechanics and Materials, 564. pp. 694-699. ISSN 1660-9336; ESSN: 1662-7482

Abdullah, Azhar and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Abdul Hamid, Nor Haliza (2014) Mechanical properties of tin tailing sand-clay mixture from Batu Gajah, Perak, Malaysia for making greensand casting mould. Materials Science Forum, 773-774. pp. 211-217. ISSN 0255-5476; ESSN: 1662-9752

Magid, Hani Mizhir and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2014) Modeling and simulation of forward Al extrusion process using FEM. Applied Mechanics and Materials, 564. pp. 525-532. ISSN 1660-9336; ESSN: 1662-7482

Mohd Rosli, Mohd Uzair and Mohd Ariffin, Mohd Khairol Anuar and Salit, Mohd Sapuan and Sulaiman, Shamsuddin (2014) Problems evaluation for TRIZ method using AHP: case study on car's dashboard improvement design concepts. Applied Mechanics and Materials, 564. pp. 89-93. ISSN 1660-9336; ESSN: 1662-7482

Sadrnia, Abdolhossein and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar and Zulkifli, Norzima and Boyer, Omid (2014) Reverse logistics network optimizing by genetic algorithm: a case study of automotive wiring harnesses. Applied Mechanics and Materials, 564. pp. 740-746. ISSN 1660-9336; ESSN: 1662-7482

Ang, Chun Kit and Tang, Sai Hong and Mashohor, Syamsiah and Mohd Ariffin, Mohd Khairol Anuar (2014) Solving continuous trajectory and forward kinematics simultaneously based on ANN. International Journal of Computers Communications & Control, 9 (3). pp. 253-260. ISSN 1841-9836

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2014) Surface quality and chip formation in turning of LM6 aluminium alloy and particulate reinforced metal matrix composite. Materials Science Forum, 773-774. pp. 894-901. ISSN 0255-5476; ESSN: 1662-9752

Darmawan, Rosli and Adam, Nor Mariah and Abdul Aziz, Nuraini and Mohd Ariffin, Mohd Khairol Anuar (2013) CFD simulation of natural convection in open pool reactor cooling system. Journal of Nuclear and Related Technologies, 10 (1). pp. 28-38. ISSN 1823-0180

Nouri, Hossein and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Samin, Razali (2013) Development and tuning of bacteria foraging optimization algorithm on cell formation in cellular manufacturing system. Journal of Automation and Control Engineering, 1 (1). pp. 36-39. ISSN 2301-3702

Nouri, Hossein and Tang, Sai Hong and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Samin, Razali (2013) Metaheuristic techniques on cell formation in cellular manufacturing system. Journal of Automation and Control Engineering, 1 (1). pp. 49-54. ISSN 2301-3702

Mohd Rosli, Mohd Uzair and Mohd Ariffin, Mohd Khairol Anuar and Salit, Mohd Sapuan and Sulaiman, Shamsuddin (2013) Integrating TRIZ and AHP: a MPV's utility compartment improvement design concepts. International Journal of Materials, Mechanics and Manufacturing, 1 (1). pp. 32-35. ISSN 1793-8198

Tang, Sai Hong and Ab. Rahman, Nasrul Hakim and Khaksar, Weria and Mohd Ariffin, Mohd Khairol Anuar and Sulaiman, Shamsuddin and Pah, Pin Shang (2013) A hybrid method using analytic hierarchical process and artificial neural network for supplier selection. International Journal of Innovation, Management and Technology, 4 (1). pp. 109-111. ISSN 2010-0248

Ghobakhloo, Morteza and Tang, Sai Hong and Zulkifli, Norzima and Mohd Ariffin, Mohd Khairol Anuar (2013) An integrated framework of green supply chain management implementation. International Journal of Innovation, Management and Technology, 4 (1). pp. 86-89. ISSN 2010-0248

Togun, Hussein and Abdulrazzaq, Tuqa and Newaz, Kazi Md. Salim and Mohamad Badry, Ahmad Badarudin and Mohd Ariffin, Mohd Khairol Anuar (2013) A CFD study of turbulent heat transfer and fluid flow through the channel with semicircle rib. In: 2013 IEEE Conference on Clean Energy and Technology (CEAT), 18-20 Nov. 2013, Langkawi, Kedah, Malaysia. (pp. 312-316).

Umar, Ali Umar and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Tang, Sai Hong (2013) Conflict-free automated guided vehicles routing using multi-objective genetic algorithm. Research Journal of Applied Sciences, Engineering and Technology, 6 (14). pp. 2681-2684. ISSN 2040-7459; ESSN: 2040-7467

Firoozi, Zahra and Ismail, Napsiah and Ariafar, Shahram and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Memariani, Azizollah (2013) Distribution network design for fixed lifetime perishable products: a model and solution approach. Journal of Applied Mathematics, 2013. art. no. 891409. pp. 1-13. ISSN 1110-757X; ESSN:1687-0042

Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Tang, Sai Hong and Mustafa, N. A. (2013) Effect of boric acid mixture as solid lubricant towards machining processes. Advanced Materials Research, 651. pp. 372-377. ISSN 1022-6680; ESSN: 1662-8985

Fatchurrohman, Nanang and Sulaiman, Shamsuddin and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2013) Generic framework for conceptual design using concurrent engineering strategy. A case study: advanced material application - product development of metal matrix composite component. Advanced Materials Research, 626. pp. 99-108. ISSN 1022-6680; ESSN: 1662-8985

Abdullah, Azhar and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Vijayaram, Thoguluva Raghavan (2013) Green compression strength of tin mine tailing sand for green sand casting mould. Pertanika Journal of Science & Technology, 21 (2). pp. 335-342. ISSN 0128-7680; ESSN: 2231-8526

Togun, Hussein and Abdulrazzaq, Tuqa and Kazi, Md. Salim Newaz and Badarudin, A. and Mohd Ariffin, Mohd Khairol Anuar (2013) Heat transfer to laminar flow over a double backward-facing step. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineer, 7 (8). pp. 667-672. ISSN 2010-376X

Ariafar, Shahram and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar and Say, Hong Tang and Firoozi, Zahra (2013) Illustration and model verification for an inter-cell and intra-cell facility layout problem in a cellular manufacturing system. In: International Conference on Information Technology and Management Innovation, ICITMI 2012, 10-11 Nov. 2012, Guangzhou; China. (pp. 1310-1314).

Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Tang, Sai Hong and Salleh, Aslinda (2013) Influence of pattern coating thickness on porosityand mechanical properties of lost foam casting of Al-Si (LM6) alloy. Applied Mechanics and Materials, 300-301. pp. 1281-1284. ISSN 1660-9336; ESSN: 1662-7482

Mohd Rosli, Mohd Uzair and Mohd Ariffin, Mohd Khairol Anuar and Salit, Mohd Sapuan and Sulaiman, Shamsuddin (2013) Integrated AHP-TRIZ innovation method for automotive door panel design. International Journal of Engineering and Technology, 5 (3). pp. 3158-3167. ISSN 0975-4024; ESSN: 2319-8613

Fadaeifard, Firouz and Gharavi, Farhad and Matori, Khamirul Amin and Daud, Abdul Razak and Mohd Ariffin, Mohd Khairol Anuar and Awang, Mokhtar (2013) Investigation of microstructure and mechanical properties of friction stir lap welded AA6061-T6 in various welding speeds. Journal of Applied Sciences, 14 (3). pp. 221-228. ISSN 1812-5654; ESSN: 1812-5662

Fatchurrohman, Nanang and Sulaiman, Shamsuddin and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2013) New technique for conceptual selection of manufacturing process and material, case study: metal matrix composite component. Advanced Materials Research, 789. pp. 82-86. ISSN 1022-6680; ESSN: 1662-8985

Togun, Hussein and Abdulrazzaq, Tuqa and Kazi, Md. Salim Newaz and Kadhum, Abdul Amir Hassan and Badarudin, Ahmed and Mohd Ariffin, Mohd Khairol Anuar and Sadeghinezhad, Emad (2013) Numerical study of turbulent heat transfer in separated flow: review. International Review of Mechanical Engineering, 7 (2). pp. 337-349. ISSN 1970-8734; ESSN: 1970-8742

Sreenivasan, Subramaniasarma and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Abdan, Khalina (2013) Recent developments of kenaf fibre reinforced thermoset composites: review. Materials Research Innovations, 17 (SUPPL 2). S2-S11. ISSN 1432-8917

Firoozi, Zahra and Ismail, Napsiah and Ariafar, Shahram and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar (2013) A genetic algorithm for solving supply chain network design model. In: International Conference on Mathematical Sciences and Statistics 2013 (ICMSS2013), 5-7 Feb. 2013, Kuala Lumpur, Malaysia. (pp. 211-214).

Firoozi, Zahra and Tang, Sai Hong and Ariafar, Shahram and Mohd Ariffin, Mohd Khairol Anuar (2013) An optimization approach for a joint location inventory model considering quantity discount policy. Arabian Journal for Science and Engineering, 38 (4). pp. 983-991. ISSN 1319-8025; ESSN: 2191-4281

Shamsuddin Sulaiman (2012) Plastic made gasing top. PI2012000680.

Rashid, Helmi and Mohd Ariffin, Mohd Khairol Anuar and Mohd Noh, Mohd Hafiz and Abdullah, Abdul Halim and Abdul Hamid, Ahmad Hussein and Mat Jusoh, Mohammad Azzeim and Othman, Akbar (2012) Design review of scissors lifts structure for commercial aircraft ground support equipment using finite element analysis. Procedia Engineering, 41. pp. 1696-1701. ISSN 1877-7058

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2012) Experimental investigation on surface roughness and tool wear in dry machining of TiC reinforced aluminium LM6 composite. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Okhovat, Mohammad Amin and Nehzati, Taravatsadat and Pouriran, Amin and Fakhar, Shahriar and Mohd Ariffin, Mohd Khairol Anuar (2012) Improving equipment effectiveness by designing optimal production process. Advanced Materials Research, 383-390. pp. 6363-6369. ISSN 1022-6680; ESSN: 1662-8985

Abdullah, Azhar and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Abdul Hamid, Nor Haliza (2012) Mechanical moulding properties of tailing sand-clay mixture from Batu Gajah, Perak, Malaysia. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2012) Optimization of cutting parameters on turning process based on surface roughness using response surface methodology. Applied Mechanics and Materials, 117-119. pp. 1561-1565. ISSN 1660-9336; ESSN: 1662-7482

Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Badakshian, Mostafa (2012) Performance optimization of simultaneous machine and automated guided vehicle scheduling using fuzzy logic controller based genetic algorithm. International Journal of Physical Sciences, 7 (9). pp. 1461-1471. ISSN 1992-1950

Sreenivasan, S. and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Abdan, Khalina (2012) Recent developments of kenaf fiber rein-forced thermoset composites: a review. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2012) Surface quality and chip formation in turning of LM6 aluminium alloy and particulate reinforced metal matrix composite. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Noroziroshan, Alireza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Mustapha, Faizal (2012) A hybrid GA-SA algorithm for multi-objective sequencing problem in high-product mix shop-floor. Applied Mechanics and Materials, 110-116. pp. 3964-3971. ISSN 1660-9336; ESSN: 1662-7482

Sayuti, M. and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar (2012) The influence of mechanical mold vibration on temperature distribution and physical properties of Al-11.8%Si matrix composites. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .

Mohd Ariffin, Mohd Khairol Anuar and Fathi, Masood and Ismail, Napsiah (2012) A new heuristic method to solve straight assembly line balancing problem. Pertanika Journal of Science & Technology, 20 (2). pp. 355-369. ISSN 0128-7680; ESSN: 2231-8526

Jahromi, Seyed Mojtaba Zabihinpour and Saghaei, Abbas and Mohd Ariffin, Mohd Khairol Anuar (2012) A review on fuzzy control charts for monitoring attribute data. Applied Mechanics and Materials, 159. pp. 23-28. ISSN 1660-9336; ESSN: 1662-7482

Tang, Sai Hong and Khaksar, Weria and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar (2012) A review on robot motion planning approaches. Pertanika Journal of Science & Technology, 20 (1). pp. 15-29. ISSN 0128-7680; ESSN: 2231-8526

Homayouni, Seyed Mahdi and Tang, Sai Hong and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar (2011) Using simulated annealing algorithm for optimization of quay cranes and automated guided vehicles scheduling. International Journal of Physical Sciences, 6 (27). pp. 6286-6294. ISSN 1992-1950

Shahrjerdi, Reza and Mohd Ariffin, Mohd Khairol Anuar and Mustapha, Faizal and Ismail, Napsiah and Esmaeili, Maryam (2011) An integrated inventory models under cooperative and non-cooperative seller-buyer and vendor supply chain. African Journal of Business Management, 5 (20). pp. 8361-8367. ISSN 1993-8233

Ariafar, Sh. and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Firoozi, Z. (2011) A stochastic facility layout model in cellular manufacturing systems. International Journal of the Physical Sciences, 6 (15). pp. 3666-3670. ISSN 1992-1950

Ariafar, Shahram and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Firoozi, Zahra (2011) Facility layout design for hybrid cellular manufacturing systems. International Journal of Physical Sciences, 6 (14). pp. 3551-3556. ISSN 1992-1950

Alsultaney, Hazem K. and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Ali, Aidy and Mustapha, Faizal (2011) An experimental validation and optimisation tool path strategy for thin walled structure. Pertanika Journal of Science & Technology, 19 (2). pp. 365-371. ISSN 0128-7680; ESSN: 2231-8526

Noroziroshan, Alireza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Mustapha, Faizal (2011) An optimization technique using hybrid GA-SA algorithm for multi-objective scheduling problem. Scientific Research and Essays, 6 (8). art. no. 587417120543. pp. 1720-1731. ISSN 1992-2248

Mohd Ariffin, Mohd Khairol Anuar and Nik Hassan, Nik Mohamad Idham and Abdullah, Mohd Firdaus (2011) Analysis of MPV dashboard using solidworks and ABAQUS. Key Engineering Materials, 471-47. pp. 634-639. ISSN 1013-9826

Sulaiman, Suraya and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and M. Sayuti (2011) Computer simulation and experimental investigation of solidification casting process. Key Engineering Materials, 471-472. pp. 601-605. ISSN 1013-9826; ESSN: 1662-9795

Sulaiman, Shamsudin and Mohd Ariffin, Mohd Khairol Anuar and Esmaeilian, Gholam Reza and Faghihi, K. and Baharudin, B. T. Hang Tuah (2011) Customer knowledge management application in Malaysian mobile service providers. Procedia Engineering, 15. pp. 3891-3895. ISSN 1877-7058

Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Esmaeilian, Gholamreza and Faghihi, K. and Baharudin, B. T. Hang Tuah (2011) Customer knowledge management application in Malaysian mobile service providers. Procedia Engineering, 15. pp. 3891-3895. ISSN 1877-7058

Mohamad, Nurhaniza and Mohd Ariffin, Mohd Khairol Anuar and Ali, Aidy and Mustapha, Faizal (2011) Deflection analysis of the thin-web workpiece structure using similarity concept. Advanced Materials Research, 337. pp. 479-488. ISSN 1022-6680; ESSN: 1662-8985

Sahroni, Taufik Roni and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Arep @ Ariff, Hambali (2011) Design and simulation on investment casting mold for metal matrix composite material. Applied Mechanics and Materials, 66-68. pp. 1676-1681. ISSN 1660-9336; ESSN: 1662-7482

Ariafar, Shahram and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Firoozi, Zahra (2011) Design of a facility layout model in hybrid cellular manufacturing systems under variable demand. International Journal of Industrial and Systems Engineering, 9 (4). pp. 373-387. ISSN 1748-5037; ESSN: 1748-5045

Abdullah, Azhar and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Vijayaram, Thoguluva Raghavan (2011) Effect of moisture content on the permeability of tailing sand samples gathered from ex tin mines in Perak state Malaysia. Applied Mechanics and Materials, 66-68. pp. 1384-1389. ISSN 1660-9336; ESSN: 1662-7482

M. Sayuti and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Vijayaram, Thoguluva Raghavan and Sulaiman, Suraya (2011) Effect of quartz-silicon dioxide particulate on tensile properties of aluminium alloy cast composites. Key Engineering Materials, 471-472. pp. 727-732. ISSN 1013-9826; ESSN: 1662-9795

Sulaiman, Shamsuddin and Tang, Sai Hong and Pawanchi, Sohaimi and Esmaeilian, Gholamreza and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2011) Improvement of Tops Spinning manufacturing with CNC Lathe. Procedia Engineering, 15. pp. 3886-3890. ISSN 1877-7058

Sulaiman, Shamsuddin and Hong, Tang Sai and Pawanchi, Sohaimi and Esmaeilian, Gholam Reza and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2011) Improvement of tops spinning manufacturing with CNC lathe. Procedia Engineering, 15. pp. 3886-3890. ISSN 1877-7058

Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin and Yusuf, Muhammad (2011) Influence of cutting parameters on surface roughness for wet and dry turning process. Key Engineering Materials, 471-472 (1). pp. 233-238. ISSN 1013-9826

M. Sayuti and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Vijayaram, Thoguluva Raghavan and Sulaiman, Suraya (2011) Influence of mechanical vibration moulding process on the tensile properties of TiC reinforced LM6 alloy composite castings. Applied Mechanics and Materials, 66-68. pp. 1207-1212. ISSN 1660-9336; ESSN: 1662-7482

Ariafar, Shahram and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Firoozi, Zahra (2011) Inter-cell and intra-cell layout design in a cellular manufacturing system. In: 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2011), 25-28 Sept. 2011, Bayview Hotel, Langkawi, Kedah. (pp. 28-33).

Abdul Samad, Mohd Syazwan and Ali, Aidy and Mohd Ariffin, Mohd Khairol Anuar (2011) Life prediction of rubber automotive components using finite element method. Key Engineering Materials, 462-463. pp. 535-540. ISSN 1013-9826; ESSN: 1662-9795

M. Sayuti and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Sulaiman, Suraya and Esmaeilian, Gholamreza (2011) Mechanical vibration technique for enhancing mechanical properties of particulate reinforced aluminium alloy matrix composite. Key Engineering Materials, 471-472. pp. 721-726. ISSN 1013-9826; ESSN: 1662-9795

Fatchurrohman, Nanang and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Abdul Aziz, Faieza and Baharudin, B. T. Hang Tuah (2011) Metal matrix composites: solidification parameters of aluminium-11.8% silicon alloy reinforced with titanium carbide particulates. Key Engineering Materials, 471-472. pp. 1081-1084. ISSN 1013-9826; ESSN: 1662-9795

Mohd Ariffin, Mohd Khairol Anuar and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Tang, Sai Hong and Sreenivasan, Subramaniasarma (2011) Simulation of thermoset injection for bulk moulding compounds (BMC). Key Engineering Materials, 471-472. pp. 1101-1106. ISSN 1013-9826; ESSN: 1662-9795

Mohd Sayuti, and Sulaiman, Suraya and Sulaiman, Shamsuddin and Vijayaram, Thoguluva Raghavan and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2011) Thermal investigation of aluminium - 11.8% silicon (LM6) reinforced SiO2 - particles. Advanced Materials Research, 264-265. pp. 620-625. ISSN 1022-6680; ESSN: 1662-8985

Golestaneh, Seyed Jafar and Ismail, Napsiah and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Naeini, Hassan Moslemi and Maghsoudi, Ali Asghar (2011) A committee machine approach to multiple response optimization. International Journal of the Physical Sciences, 6 (35). art. no. F8D798124547. pp. 7935-7949. ISSN 1992-1950

Abdullah, Azhar and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Vijayaram, Thoguluva Raghavan (2011) The effect of bentonite clay on green compression strength for tailing sands from old tin mines in Perak state, Malaysia for making green sand casting mould. Key Engineering Materials, 471-472. pp. 769-774. ISSN 1013-9826; ESSN: 1662-9795

Mohd Sayuti, and Sulaiman, Shamsuddin and Vijayaram, Thoguluva Raghavan and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar (2011) The influence of mechanical vibration moulding process on thermal conductivity and diffusivity of Al-TiC particulate reinforced composites. Advanced Materials Research, 311-313. pp. 3-8. ISSN 1022-6680; ESSN: 1662-8985

Tang, Sai Hong and Firoozi, Zahra and Mohd Ariffin, Mohd Khairol Anuar and Ariafar, Shahram (2011) An integrated inventory location model considering all-unit quantity discount. African Journal of Business Management, 5 (27). art. no. 047B24816698. pp. 10965-10971. ISSN 1993-8233

Fathi, Masood and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah (2010) A note on “A multi-objective genetic algorithm for solving assembly line balancing problem”. International Journal of Advanced Manufacturing Technology, 50 (5-8). pp. 771-773. ISSN 0268-3768; ESSN: 1433-3015

Noroziroshan, Alireza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah (2010) Application of intelligence based genetic algorithm for job sequencing problem on parallel mixed-model assembly line. American Journal of Engineering and Applied Sciences, 3 (1). pp. 15-24. ISSN 1941-7020; ESSN: 1941-7039

Nouri, Hossein and Tang, Sai Hong and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar (2010) BASE: a bacteria foraging algorithm for cell formation with sequence data. Journal of Manufacturing Systems, 29 (2-3). pp. 102-110. ISSN 0278-6125; ESSN: 1878-6642

Mohd Sayuti, and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Sulaiman, Suraya and Vijayaram, Thoguluva Raghavan (2010) Mechanical properties of particulate reinforced aluminium alloy matrix composite. In: International Conference on Advances in Materials and Processing Technologies (AMPT2010), 24-27 Oct. 2010, Paris, France. (pp. 86-91).

M., Sayuti and S., Suraya and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar (2010) Processing and characterisation of particulate reinforced aluminium -11.8% silicon matrix composite. In: Aceh Development International Conference 2010, 26-28 Mar. 2010, Faculty of Engineering, Universiti Putra Malaysia. (pp. 811-817).

Mohd Ariffin, Mohd Khairol Anuar and Mohd Ali, M. I. and Salit, Mohd Sapuan and Ismail, Napsiah (2009) An optimise drilling process for an aircraft composite structure using design of experiments. Scientific Research and Essays, 4 (10). art. no. E509DE018608. pp. 1109-1116. ISSN 1992-2248

Abdul Aziz, Faieza and Salit, Mohd Sapuan and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Supeni, Eris Elianddy (2009) Design and fabrication of a student competition based racing car. Scientific Research and Essays, 4 (5). art. no. 5A7998D16219. pp. 361-366. ISSN 1992-2248

Salit, Mohd Sapuan and Ham, K. W. and Ng, K. M. and Woo, C. K. and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Abdul Aziz, Faieza and Supeni, Eris Elianddy and Abdul Jalil, Nawal Aswan (2009) Design of composite racing car body for student based competition. Scientific Research and Essays, 4 (11). art. no. 0B4FFB118730. pp. 1151-1162. ISSN 1992-2248

Alsultaney, Hazem K. and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Ali, Aidy and Mustapha, Faizal (2009) Develpoment of combinatorial optimisation for cutting tool path strategy. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 579-587).

Mohamad, Nurhaniza and Mohd Ariffin, Mohd Khairol Anuar and Ali, Aidy and Mustapha, Faizal and Abdul Wahab, Noraini (2009) Finite element analysis of composite materials for aerospace applications. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 172-182).

Sulaiman, Suraya and Sulaiman, Shamsuddin and Sheikh Md Fadzullah, Siti Hajar and Mohd Sayuti, and Mohd Ariffin, Mohd Khairol Anuar (2009) Mechanical anisotropy behavior of fused deposition modelling ABS. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 453-461).

Homayouni, Seyed Mahdi and Tang, Sai Hong and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar and Samin, Razali (2009) A hybrid genetic-heuristic algorithm for scheduling of automated guided vehicles and quay cranes in automated container terminals. In: 39th International Conference on Computers & Industrial Engineering (CIE39), 6-8 July 2009, University of Technology of Troyes, France. (pp. 96-101).

Abdul Aziz, Faieza and Pham, Duc Truong and Sulaiman, Shamsuddin and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2008) Visual feedback and pseudo–haptic feedback improve manual lifting performance. Jurnal Teknologi, 49 (D). pp. 157-171. ISSN 0127–9696; ESSN; 2180–3722

Jolgaf, Mohamed A. Abdulmawlla and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Abdul Aziz, Faieza (2008) Billet shape optimization for minimum forging load. European Journal of Scientific Research, 24 (3). pp. 420-427. ISSN 1450-216X

Jolgaf, Mohamed A. Abdulmawlla and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Abdul Aziz, Faieza (2008) Closed die forging geometrical parameters optimization for Al-MMC. American Journal of Engineering and Applied Sciences, 1 (1). pp. 1-6. ISSN 1941-7020; ESSN: 1941-7039

Mohd Ariffin, Mohd Khairol Anuar (2001) Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen. Masters thesis, Universiti Putra Malaysia.

Kamaluddin, Rohaya and Mohd Ariffin, Mohd Khairol Anuar and Tang, Sai Hong and Mohammed, S. B. Analysis of Automated G-Clip machine processes and substation process with simulation by using CAD software. In: 15th International Conference on Advances in Materials of Processing Technologies, 23-26 Sept. 2012, University of Wollongong, Australia. .