Items where Author is "H'ng, Paik San"

Wen, Ze Go and Chin, Kit Ling and H'ng, Paik San and Wong, Mui Yun and Chuah, Luqman Abdullah and Surendran, Arthy and Tan, Geok Hun and Lee, Chuan Li and Khoo, Pui San and Kong, Wai Jern (2021) Virulence of Rigidoporus microporus isolates causing white root rot disease on rubber trees (Hevea brasiliensis) in Malaysia. Plants, 10 (10). Jan-15. ISSN 2223-7747

Chin, Kit Ling and H'ng, Paik San and Lee, Chuan Li and Wong, Wan Zhen and Go, Wen Ze and Khoo, Pui San and Abdullah, Luqman Chuah and Ashaari, Zaidon (2021) Application strategies by selective medium treated with entomopathogenic bacteria Serratia marcescens and Pseudomonas aeruginosa as potential biocontrol against Coptotermes curvignathus. Royal Society Open Science, 8 (4). pp. 1-16. ISSN 2054-5703

Lee, Chuan Li and Chin, Kit Ling and H'ng, Paik San and Khoo, Pui San and Abdullah, Luqman Chuah (2021) Enhanced properties of single-layer particleboard made from oil palm empty fruit bunch fibre with additional water-soluble additives. BioResources, 16 (3). pp. 6159-6173. ISSN 1930-2126

Lee, Chuan Li and H'ng, Paik San and Chin, Kit Ling and Md Tahir, Paridah and Rashid, Umer and Go, Wen Ze (2019) Characterization of bioadsorbent produced using incorporated treatment of chemical and carbonization procedures. Royal Society Open Science, 6. pp. 1-17. ISSN 2054-5703

Chin, Kit Ling and Mohd Yaakob, Nurliyana and H'ng, Paik San and Lee, Chuan Li and Go, Wen Ze and Khoo, Pui San and Raja Nazrin, Raja Ahmad and Siti Nurul Ashikin (2019) Effects of bacterial bio-augmentation on the methane potential from facultative digestion of palm oil mill effluent and empty fruit bunch. Waste and Biomass Valorization, 11. pp. 3407-3418. ISSN 1877-2641; ESSN: 1877-265X

Go, Wen Ze and H'ng, Paik San and Wong, Mui Yun and Chin, Kit Ling and Ujang, Salmiah and Noran, Aizat Shamin (2019) Evaluation of Trichoderma asperellum as a potential biocontrol agent against Rigidoporus microporus Hevea brasiliensis. Archives of Phytopathology and Plant Protection, 52 (7-8). pp. 639-666. ISSN 0323-5408; ESSN: 1477-2906

Khoo, Pui San and H'ng, Paik San and Chin, Kit Ling and Bakar, Edi Suhaimi and Maminski, Mariusz and Raja Ahmad, Raja Nazrin and Lee, Chuan Li and Rosli, Siti Nurul Ashikin and Saharudin, Mohd Hizami (2018) Peeling of small diameter rubber log using spindleless lathe technology: evaluation of veneer properties from outer to inner radial section of log at different veneer thicknesses. European Journal of Wood and Wood Products, 76. 1335 - 1346. ISSN 0018-3768; ESSN: 1436-736X

Lee, Chuan Li and H'ng, Paik San and Md Tahir, Paridah and Chin, Kit Ling and Rashid, Umer and Maminski, Mariusz and Go, Wen Ze and Raja Nazrin, Raja Ahmad and Rosli, Siti Nurul Asyikin and Khoo, Pui San (2018) Production of bioadsorbent from phosphoric acid pretreated palm kernel shell and coconut shell by two-stage continuous physical activation via N₂ and air. Royal Society Open Science, 5. pp. 1-19. ISSN ESSN: 2054-5703

Chin, Kit Ling and Ibrahim, Shamsudin and Hakeem, Khalid Rehman and H'ng, Paik San and Lee, Seng Hua and Mohd Lila, Mohd Azmi (2017) Bioenergy production from bamboo: potential source from Malaysia's perspective. BioResources, 12 (3). pp. 6844-6867. ISSN 1930-2126

Lee, Chuan Li and H'ng, Paik San and Tahir, Paridah and Chin, Kit Ling and Khoo, Pui San and Raja Ahmad, Raja Nazrin and Rosli, Siti Nurul Asyikin and Mariusz, Maminski (2017) Effect of reaction time and temperature on the properties of carbon black made from palm kernel and coconut shell. Asian Journal of Scientific Research, 10 (1). 24 - 33. ISSN 1992-1454; ESSN: 2077-2076

Ahmed Basher, Amel Basher and Md. Tahir, Paridah and Sudin, Rahim and H'ng, Paik San and Ahmad, Zakiah and Hussein, Ahmed S. (2017) Physical-mechanical characteristics of cement-bonded kenaf bast fibres composite boards with different densities. Journal of Engineering Science and Technology, 12 (8). pp. 2254-2267. ISSN 1823-4690

H'ng, Paik San and Li, Kun Long and Cheng, Zheng Zhang and Tang, Chao Hui and Wong, Yung Seng and Foo, Shih Lin and Aw, Tong Hun and Wan, Kim Fong (2016) Anatomical features, fiber morphological, physical and mechanical properties of three years old new hybrid Paulownia: green Paulownia. Research Journal of Forestry, 10 (1). pp. 30-35. ISSN 1819-3439; ESSN:2151-8262

Maminski, Mariusz and Kozakiewicz, Paweł and Jaskołowski, Waldemar and Chin, Kit Ling and H'ng, Paik San and Toczyłowska-Mamińska, Renata (2016) Enhancement of technical value of oil palm (Elaeis guineensis Jacq.) waste trunk through modification with 1,3-dimethylol-4,5- dihydroxyethyleneurea (DMDHEU). European Journal of Wood and Wood Products, 74 (6). pp. 837-844. ISSN 0018-3768; ESSN: 1436-736X

Lee, Seng Hua and Ashaari, Zaidon and Lum, Wei Chen and H'ng, Paik San and Tan, Li Peng and Chow, May Jinn and Chai, Ee Wen and Chin, Kit Ling (2015) Properties of particleboard with oil palm trunk as core layer in comparison to three-layer rubberwood particleboard. Journal of Oil Palm Research, 27 (1). pp. 67-74. ISSN 1511-2780

Wong, Wan Zhen and H'ng, Paik San and Chin, Kit Ling and Sajap, Ahmad Said and Tan, G H and M. Tahir, Paridah and Othman, Soni and Chai, E. W. and Go, Wen Ze (2015) Preferential use of carbon sources in culturable aerobic mesophilic bacteria of Coptotermes curvignathus's (Isoptera: Rhinotermitidae) gut and its foraging area. Environmental Entomology, 44 (5). pp. 1367-1374. ISSN 0046-225X; ESSN: 1938-2936

Pang, Suet Kum and H'ng, Paik San and Chai, Lai Yee and Lee, Seng Hua and Md. Tahir, Paridah (2015) Value added productivity performance of the peninsular Malaysian wood sawmilling industry. BioResources, 10 (4). pp. 7324-7338. ISSN 1930-2126

Lee, Seng Hua and H'ng, Paik San and Lum, Wei Chen and Ashaari, Zaidon and Bakar, Edi Suhaimi and M. Y., Nurliyana and Chai, Ee Wen and Chin, Kit Ling (2014) Mechanical and physical properties of oil palm trunk core particleboard bonded with different UF resins. Journal of Oil Palm Research, 26 (2). pp. 163-169. ISSN 1511-2780

Szymona, Karolina and Borysiuk, Piotr and H'ng, Paik San and Chin, Kit Ling and Maminski, Mariusz (2014) Valorization of waste oil palm (Elaeis guineensis Jacq.) biomass through furfurylation. Materials and Design, 53. pp. 425-429. ISSN 0264-1275; ESSN: 1873-4197

Wong, Lih Jiun and H'ng, Paik San and Wong, Sin Yee and Lee, Seng Hua and Lum, Wei Chen and Chai, Ee Wen and Wong, Wan Zhen and Chin, Kit Ling (2014) Termite digestomes as a potential source of symbiotic microbiota for lignocelluloses degradation: a review. Pakistan Journal of Biological Sciences, 17 (8). pp. 956-963. ISSN 1028-8880; ESSN: 1812-5735

Chin, K. L. and H'ng, Paik San and Go, W. Z. and Lim, Tau Wai and Maminski, M. and Md. Tahir, Paridah and Abdullah, Luqman Chuah (2013) Optimization of torrefaction conditions for high energy density solid biofuel from oil palm biomass and fast growing species available in Malaysia. Industrial Crops and Products, 49. pp. 768-774. ISSN 0926-6690; ESSN: 1872-633X

Md Allwi, Norul Izani and Md. Tahir, Paridah and Uyup, Mohd Khairun Anwar and M. Y., Mohd Nor and H'ng, Paik San (2013) Effects of fiber treatment on morphology, tensile and thermogravimetric analysis of oil palm empty fruit bunches fibers. Composites Part B: Engineering, 45 (1). pp. 1251-1257. ISSN 1359-8368; ESSN: 1879-1069

Chai, Ee Wen and H'ng, Paik San and Peng, S. H. and Wan Azha, W. M. and Chin, Kit Ling and Chow, M. J. and Wong, W. Z. (2013) Compost feedstock characteristics and ratio modelling for organic waste materials co-composting in Malaysia. Environmental Technology, 34 (20). pp. 2859-2866. ISSN 0959-3330; ESSN: 1479-487X

Peng, S. H. and Wan Azha, W. M. and Wong, W. Z. and Go, W. Z. and Chai, Ee Wen and Chin, Kit Ling and H'ng, Paik San (2013) Effect of using agro-fertilizers and N-fixing Azotobacter enhanced biofertilizers on the growth and yield of corn. Journal of Applied Sciences, 13 (3). pp. 508-512. ISSN 1812-5654; ESSN: 1812-5662

Tay, Pei Wen and H'ng, Paik San and Chin, Kit Ling and Wong, Lih Jiun and Abdullah, Luqman Chuah (2013) Effects of steeping variables and substrate mesh size on starch yield extracted from oil palm trunk. Industrial Crops and Products, 44. pp. 240-245. ISSN 0926-6690; ESSN: 1872-633X

Chin, Kit Ling and H'ng, Paik San and Wong, Lih Jiun and Tey, Beng Ti and Md. Tahir, Paridah (2011) Production of glucose from oil palm trunk and sawdust of rubberwood and mixed hardwood. Applied Energy, 88 (11). pp. 4222-4228. ISSN 0306-2619; ESSN: 1872-9118

H'ng, Paik San and Lee, A. N. and Hang, C. M. and Lee, Seng Hua and Md. Tahir, Paridah and Abdan, Khalina (2011) Biological durability of injection moulded wood plastic composite boards. Journal of Applied Sciences, 11 (2). pp. 384-388. ISSN 1812-5654; ESSN: 1812-5662

H'ng, Paik San and Wong, Lih Jiun and Chin, Kit Ling and Tor, Ee Sang and Tan, Shu Ei and Tey, Beng Ti and Maminski, Mariuz (2011) Oil palm (Elaeis guineensis) trunk as a resource of starch and other sugars. Journal of Applied Sciences, 11 (16). pp. 3053-3057. ISSN 1812-5654; ESSN: 1812-5662

H'ng, Paik San and Lee, Seng Hua and Loh, Yang Way and Lum, Wei Chen and Tan, B. H. (2011) Production of low formaldehyde emission particleboard by using new formulated formaldehyde based resin. Asian Journal of Scientific Research, 4 (3). pp. 264-270. ISSN 1992-1454

Chin, Kit Ling and H'ng, Paik San and Wong, Lih Jiun and Tey, Beng Ti and Md. Tahir, Paridah (2010) Optimization study of ethanolic fermentation from oil palm trunk, rubberwood and mixed hardwood hydrolysates using Saccharomyces cerevisiae. Bioresource Technology, 101 (9). pp. 3287-3291. ISSN 0960-8524; ESSN: 1873-2976

H'ng, Paik San and Md. Tahir, Paridah and Chin, K. L. (2010) Bending properties of Laminated Veneer Lumber produced from Keruing (Dipterocarpus sp.) reinforced with low density wood species. Asian Journal of Scientific Research, 3 (2). pp. 118-125. ISSN 1992-1454; ESSN: 2077-2076

Lee, Soon Heng and H'ng, Paik San and Lee, A. N. and Sajap, Ahmad Said and Tey, Beng Ti and Ujang, Salmiah (2010) Production of pyroligneous acid from lignocellulosic biomass and their effectiveness against biological attacks. Journal of Applied Sciences, 10 (20). pp. 2440-2446. ISSN 1812-5654; ESSN: 1812-5662

Loh, Yang Way and H'ng, Paik San and Lee, Seng Hua and Lum, Wei Chen and Tan, Chun Knee (2010) Properties of particleboard produced from admixture of rubberwood and Mahang species. Asian Journal of Applied Sciences, 3 (5). pp. 310-316. ISSN 1996-3343

H'ng, Paik San and Khor, B. N. and Tadashi, Nobuchi and Ab Shukor, Nor Aini and Md. Tahir, Paridah (2009) Anatomical structures and fiber morphology of new kenaf varieties. Asian Journal of Scientific Research, 2 (3). pp. 161-166. ISSN 1992-1454; ESSN: 2077-2076

H'ng, Paik San and Chin, Kit Ling (2008) Solid hardwood flooring resistance to termites (Coptotermes curvignathus) under laboratory condition. The Malaysian Forester, 71 (2). pp. 131-137. ISSN 0302-2935

H'ng, Paik San and Md. Tahir, Paridah and Ahmad, Zakiah (2013) Bending performance of LVL manufactured from Malaysian tropical timbers. In: Laminated Veneer Lumber Made From Tropical Forest Trees: Mechanical Properties. UiTM Press, Shah Alam, Selangor, pp. 17-30. ISBN 9789673634514

H'ng, Paik San and Md. Tahir, Paridah and Ahmad, Zakiah (2013) Failure characteristics of LVL in flatwise bending. In: Laminated Veneer Lumber Made From Tropical Forest Trees: Mechanical Properties. UiTM Press, Shah Alam, Selangor, pp. 53-60. ISBN 9789673634514

Md. Tahir, Paridah and H'ng, Paik San and Ahmad, Zakiah (2013) Laminated veneer lumber (LVL) : a new addition to the Malaysian plywood industry. In: Laminated Veneer Lumber Made From Tropical Forest Trees: Mechanical Properties. UiTM Press, Shah Alam, Selangor. ISBN 9789673634514

Md. Tahir, Paridah and H'ng, Paik San and Ahmad, Zakiah (2013) Relationship between bending shear and glue bond shear in LVL. In: Laminated Veneer Lumber Made From Tropical Forest Trees: Mechanical Properties. UiTM Press, Shah Alam, Selangor, pp. 43-52. ISBN 9789673633514

H'ng, Paik San and Md. Tahir, Paridah and Ahmad, Zakiah and Ibrahim, Azmi (2013) Shear modulus of LVL based on bending shear test. In: Laminated Veneer Lumber Made From Tropical Forest Trees: Mechanical Properties. UiTM Press, Shah Alam, Selangor, pp. 31-42. ISBN 9789673634514

Md. Tahir, Paridah and H'ng, Paik San and Ahmad, Zakiah (2013) Tensile strength characteristics of LVL based on full scale testing. In: Laminated Veneer Lumber Made From Tropical Forest Trees: Mechanical Properties. UiTM Press, Shah Alam, Selangor, pp. 61-74. ISBN 9789673634514

H'ng, Paik San and Chin, Kit Ling (2013) A real story of bioethanol from biomass : Malaysia perspective. In: Biomass Now - Sustainable Growth and Use. InTech, Rijeka, Croatia. ISBN 9789535111054

Go, Wen Ze and H'ng, Paik San and Wong, Mui Yun (2018) Evaluation of antagonism and lytic enzymes production by Trichoderma species as potential biocontrol agents against Rigidoporus microporus. In: Joint Symposium of the 8th International Agriculture Congress 2018 and 6th International Symposium for Food & Agriculture 2018 (8th IAC – 6th ISFA 2018), 13-15 Nov. 2018, Auditorium Rashdan Baba, TNCPI Building, Universiti Putra Malaysia. (pp. 273-277).

Chai, Ee Wen and H'ng, Paik San and Abdu, Arifin and Abdullah, Luqman Chuah (2013) Calorific values and chemical composition of fast growing timber species. In: International Forestry Graduate Students' Conference 2013 (FORGRAD 2013), 2-4 July 2013, Universiti Putra Malaysia, Serdang, Selangor. (pp. 87-91).

H'ng, Paik San and Md. Tahir, Paridah (2005) Edgewise bending properties of laminated veneer lumber manufactured from low density woods mixed with keruing (Dipterocarpus spp.) veneers. In: International Conference on Advanced Materials 2005: Conference on Bio- Engineering (CoBE 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. .

Md. Tahir, Paridah and H'ng, Paik San and Wong, Ee Ding and Chuo, Toung Wrn and Ahmad, Zakiah and Ibrahim, Azmi and Jamaluddin, Mohd Ariff Structural Laminated Veneer Lumber (SLVL) produced from tropical hardwoods as new building material for Malaysia. Research Report. Research Management Centre, Serdang, Selangor.

H'ng, Paik San (2003) Basic Engineering Properties of Laminated Veneer Lumber Produced from Tropical Hardwood Species. Doctoral thesis, Universiti Putra Malaysia.