Browse by Journal Title

Ansari, Anwaar Hazoor and Mohd Jakarni, Fauzan and Muniandy, Ratnasamy and Hassim, Salihudin and Elahi, Zafreen and Zair, Mohamed Meftah Ben (2023) Mechanical performance of cup lump rubber modified asphalt mixtures incorporating polyphosphoric acid. Construction and Building Materials, 408. art. no. 133625. pp. 1-14. ISSN 0950-0618; ESSN: 1879-0526

Al-Sabaeei, Abdulnaser M. and Alhussian, Hitham and Abdulkadir, Said Jadid and Giustozzi, Filippo and Mohd Jakarni, Fauzan and Md Yusoff, Nur Izzi (2023) Predicting the rutting parameters of nanosilica/waste denim fiber composite asphalt binders using the response surface methodology and machine learning methods. Construction and Building Materials, 363. art. no. 129871. pp. 1-25. ISSN 0950-0618; ESSN: 1879-0526

Ansari, Anwaar Hazoor and Mohd Jakarni, Fauzan and Muniandy, Ratnasamy and Hassim, Salihudin and Elahi, Zafreen and Zair, Mohamed Meftah Ben (2022) Effect of cup lump rubber as a sustainable bio-modifier on the properties of bitumen incorporating polyphosphoric acid. Construction and Building Materials, 323. art. no. 126505. pp. 1-16. ISSN 0950-0618; ESSN: 1879-0526

Amran, Mugahed and Abdelgader, Hakim S. and Onaizi, Ali M. and Fediuk, Roman and Ozbakkaloglu, Togay and Rashid, Raizal S.M. and Murali, G. (2022) 3D-printable alkali-activated concretes for building applications: a critical review. Construction and Building Materials, 319 (126126). pp. 1-24. ISSN 0950-0618; ESSN: 1879-0526

Amran, Mugahed and Huang, Shan-Shan and Debbarma, Solomon and M. Rashid, Raizal S. (2022) Fire resistance of geopolymer concrete: a critical review. Construction and Building Materials, 324. art. no. 126722. pp. 1-26. ISSN 0950-0618

Amran, Y. H. Mugahed and Abang Ali, Abang Abdullah and Muhammad Rashid, Raizal Saifulnaz and Hejazi, Farzad and Safiee, Nor Azizi (2016) Structural behavior of axially loaded precast foamed concrete sandwich panels. Construction and Building Materials, 107. pp. 307-320. ISSN 0950-0618

Anokye, Rogerson and Bakar, Edi Suhaimi and Ratnasingam, Jegatheswaran and Choo, Adrian Cheng Yong and Bakar, Nova Noliza (2016) The effects of nodes and resin on the mechanical properties of laminated bamboo timber produced from Gigantochloa scortechinii. Construction and Building Materials, 105. pp. 285-290. ISSN 0950-0618; ESSN: 1879-0526

Abd. Aziz, Farah Nora Aznieta and Mohammed Bida, Sani and Mohd. Nasir, Noor Azline and Jaafar, Mohd Saleh (2014) Mechanical properties of lightweight mortar modified with oil palm fruit fibre and tire crumb. Construction and Building Materials, 73. pp. 544-550. ISSN 0950-0618

Alawad, Omer Abdalla and Alhozaimy, Abdulrahman and Jaafar, Mohd Saleh and Al-Negheimish, Abdulaziz and Abd Aziz, Farah Nora Aznieta (2014) Microstructure analyses of autoclaved ground dune sand-Portland cement paste. Construction and Building Materials, 65. pp. 14-19. ISSN 0950-0618

Abang Ali, Abang Abdullah and Demirboga, Ramazan and Farzadnia, Nima and Anwar, Mohammed Parvez (2013) Characterization of high strength mortars with nano Titania at elevated temperatures. Construction and Building Materials, 43. pp. 469-479. ISSN 0950-0618

Bahmani, Sayed Hessam and Nima Farzadnia, and Asadi, Afshin and B. K. Huat, Bujang (2016) The effect of size and replacement content of nanosilica on strength development of cement treated residual soil. Construction and Building Materials, 118. pp. 294-306. ISSN 0950-0618

Bahmani, Sayed Hessam and Kim Huat, Bujang and Asadi, Afshin and Farzadnia, Nima (2014) Stabilization of residual soil using SiO2 nanoparticles and cement. Construction and Building Materials, 64. pp. 350-359. ISSN 0950-0618

Elahi, Zafreen and Jakarni, Fauzan Mohd and Muniandy, Ratnasamy and Hassim, Salihudin and Ab Razak, Mohd Shahrizal and Ansari, Anwaar Hazoor (2024) Influence of novel modified waste cooking oil beads on rheological characteristics of bitumen. Construction and Building Materials, 414. p. 134829. ISSN 0950-0618; ESSN: 1879-0526

Hanoon, Ammar N. and Jaafar, M. S. and Hejazi, Farzad and Aziz, Farah N .A. Abdul (2017) Strut-and-tie model for externally bonded CFRP-strengthened reinforced concrete deep beams based on particle swarm optimization algorithm: CFRP debonding and rupture. Construction and Building Materials, 147. 428 - 447. ISSN 0950-0618

Ismail, Ruqayyah and Muhammad Rashid, Raizal Saifulnaz and Chan, Wong Chien and Jaafar, Mohd Saleh and Hejazi, Farzad (2019) Compressive behavior of concrete cylinder fully and partially confined by carbon fibre-reinforced polymer (CFRP). Construction and Building Materials, 201. pp. 196-206. ISSN 0950-0618

Jaafar, Mohd Saleh and Yardim, Yavuz and Thanoon, Waleed Abdulmalik and Laseima, Saleh Yhya (2013) AAC-concrete light weight precast composite floor slab. Construction and Building Materials, 40. pp. 405-410. ISSN 0950-0618

Jaafar, Mohd Saleh and Thanoon, Waleed Abdulmalik and Najm, Amad M. S. and Abdul Kadir, Mohd Razali and Abang Ali, Abang Abdullah (2006) Strength correlation between individual block, prism and basic wall panel for load bearing interlocking mortarless hollow block masonry. Construction and Building Materials, 20 (7). pp. 492-498. ISSN 0950-0618

Lee, Seng Hua and Ashaari, Zaidon and Lum, Wei Chen and Abdul Halip, Juliana and Ang, Aik Fei and Tan, Li Peng and Chin, Kit Ling and Md Tahir, Paridah (2018) Thermal treatment of wood using vegetable oils: a review. Construction and Building Materials, 181. 408 - 419. ISSN 0950-0618; ESSN: 1879-0526

Muhammad Rashid, Raizal Saifulnaz and S., Mohammed Salem and N. M., Azreen and Y. L., Voo and M., Haniza and A. A., Shukri and Yahya, Mohd Syukri (2020) Effect of elevated temperature to radiation shielding of ultra-high performance concrete with silica sand or magnetite. Construction and Building Materials, 262. art. no. 120567. pp. 1-7. ISSN 0950-0618

Masenwat, Noor Azreen and Muhammad Rashid, Raizal Saifulnaz and M., Haniza and Voo, Yen Lei and Amran, Mugahed Yahya Hussein (2018) Radiation shielding of ultra-high-performance concrete with silica sand, amang and lead glass. Construction and Building Materials, 172. 370 - 377. ISSN 0950-0618; ESSN: 1879-0526

Mohd Jakarni, Fauzan and Md. Yusoff, Nur Izzi and Nguyen, Viet Hung and Hainin, Mohd Rosli and Airey, Gordon D. (2013) Modelling the Rheological Properties of Bituminous Binders Using Mathematical Equations. Construction and Building Materials, 40. pp. 174-188. ISSN 0950-0618

Noor Abbas, Al-Ghazali and Abdul Aziz, Farah Nora Aznieta and Abdan, Khalina and Mohd Nasir, Noor Azline and Huseien, Ghasan Fahim (2022) A state-of-the-art review on fibre-reinforced geopolymer composites. Construction and Building Materials, 330. art. no. 127187. pp. 1-24. ISSN 0950-0618

N. M., Azreen and M. Rashid, Raizal S. and Amran, Y. H. Mugahed and Voo, Y. L. and M., Haniza and M. Hairie and Alyousef, Rayed and Alabduljabbar, Hisham (2020) Simulation of ultra-high-performance concrete mixed with hematite and barite aggregates using Monte Carlo for dry cask storage. Construction and Building Materials, 263. pp. 1-14. ISSN 0950-0618

Nasir, Mohammed and Khali, D. P. and Jawaid, Mohammad and Tahir, P. M. and Siakeng, Ramengmawii and Asim, Mohammad and Ahmed Khan, Tanveer (2019) Recent development in binderless fiber-board fabrication from agricultural residues: a review. Construction and Building Materials, 211. pp. 502-516. ISSN 0950-0618

Nima Farzadnia and Noorvand, Hossein and Mohamed Yasin, Abdirahman and A. Aziz, Farah Nora (2015) The effect of nano silica on short term drying shrinkage of POFA cement mortars. Construction and Building Materials, 95. pp. 636-646. ISSN 0950-0618; ESSN: 1879-0526

Noorvand, Hossein and Abang Ali, Abang Abdullah and Demirboga, Ramazan and Noorvand, Hassan and Farzadnia, Nima (2013) Physical and chemical characteristics of unground palm oil fuel ash cement mortars with nanosilica. Construction and Building Materials, 48. pp. 1104-1113. ISSN 0950-0618

Noorvand, Hassan and Abang Ali, Abang Abdullah and Demirboga, Ramazan and Farzadnia, Nima and Noorvand, Hossein (2013) Incorporation of nano TiO2 in black rice husk ash mortars. Construction and Building Materials, 47. pp. 1350-1361. ISSN 0950-0618

Najigivi, Alireza and Abdul Rashid, Suraya and Abd. Aziz, Farah Nora Aznieta and Mohd Salleh, Mohamad Amran (2010) Assessment of the effects of rice husk ash particle size on strength, water permeability and workability of binary blended concrete. Construction and Building Materials, 24 (11). pp. 2145-2150. ISSN 0950-0618

Omar, Hend Ali and Md. Yusoff, Nur Izzi and Ceylan, Halil and Abdul Rahman, Irman and Sajuri, Zainuddin and Mohd Jakarni, Fauzan and Ismail, Amiruddin (2018) Determining the water damage resistance of nano-clay modified bitumens using the indirect tensile strength and surface free energy methods. Construction and Building Materials, 167. 391 - 402. ISSN 0950-0618; ESSN: 1879-0526

Omar, Hend Ali and Md. Yusoff, Nur Izzi and Sajuri, Zainuddin and Ceylan, Halil and Mohd Jakarni, Fauzan and Ismail, Amiruddin (2016) Determining the effects of aging on halloysite nano-tube modified binders through the pull-off test method. Construction and Building Materials, 126 (2016). pp. 245-252. ISSN 0950-0618

Ramlee, Nor Azlina and Jawaid, Mohammad and Yamani, Shaikh Abdul Karim and Zainudin, Edi Syams and Alamery, Salman (2021) Effect of surface treatment on mechanical, physical and morphological properties of oil palm/bagasse fiber reinforced phenolic hybrid composites for wall thermal insulation application. Construction and Building Materials, 276. art. no. 122239. pp. 1-10. ISSN 0950-0618

Ramlee, Nor Azlina and Naveen, Jesuarockiam and Jawaid, Mohammad (2020) Potential of oil palm empty fruit bunch (OPEFB) and sugarcane bagasse fibers for thermal insulation application–a review. Construction and Building Materials, 271. art. no. 121519. pp. 1-16. ISSN 0950-0618

Saba, Naheed and Alothman, Othman Y. and Almutairi, Z. and Jawaid, Mohammad (2019) Magnesium hydroxide reinforced kenaf fibers/epoxy hybrid composites: mechanical and thermomechanical properties. Construction and Building Materials, 201. pp. 138-148. ISSN 0950-0618

Senthilkumar, Krishnasamy and Saba, Naheed and Chandrasekar, Muthukumar and Jawaid, Mohammad and Rajini, N. and Alothman, Othman Y. and Siengchine, Suchart (2019) Evaluation of mechanical and free vibration properties of the pineapple leaf fibre reinforced polyester composites. Construction and Building Materials, 195. pp. 423-431. ISSN 0950-0618

Senthilkumar, K. and Saba, N. and Rajini, N. and Chandrasekar, M. and Jawaid, M. and Siengchin, Suchart and Alotmane, Othman Y. (2018) Mechanical properties evaluation of sisal fibre reinforced polymer composites: a review. Construction and Building Materials, 174. 713 - 729. ISSN 0950-0618, ESSN: 1879-0526

Saba, Naheed and Jawaid, Mohammad and Alothman, Othman Y. and Md. Tahir, Paridah (2016) A review on dynamic mechanical properties of natural fibre reinforced polymer composites. Construction and Building Materials, 106. pp. 149-159. ISSN 0950-0618

Salih, Moslih Amer and Abang Ali, Abang Abdullah and Farzadnia, Nima (2014) Characterization of mechanical and microstructural properties of palm oil fuel ash geopolymer cement paste. Construction and Building Materials, 65. pp. 592-603. ISSN 0950-0618

Thanoon, Waleed Abdulmalik and Yardim, Yavuz and Jaafar, Mohd Saleh and Noorzaei, Jamaloddin (2010) Development of interlocking mechanism for shear transfer in composite floor. Construction and Building Materials, 24 (12). pp. 2604-2611. ISSN 0950-0618

Thanoon, Waleed Abdulmalik and Yardim, Yavuz and Jaafar, Mohd Saleh and Noorzaei, Jamaloddin (2010) Structural behaviour of ferrocement–brick composite floor slab panel. Construction and Building Materials, 24 (11). pp. 2224-2230. ISSN 0950-0618

Thanoon, Waleed Abdulmalik and Jaafar, Mohd Saleh and Abdul Kadir, Mohd Razali and Noorzaei, Jamaloddin (2005) Repair and structural performance of initially cracked reinforced concrete Slabs. Construction and Building Materials, 19 (8). pp. 595-603. ISSN 0950-0618

Thanoon, Waleed Abdulmalik and Jaafar, Mohd Saleh and Abdul Kadir, Mohd Razali and Abang Ali, Abang Abdullah and Trikha, D. N. and Najm, Amad M. S. (2004) Development of an innovative interlocking load bearing hollow block system in Malaysia. Construction and Building Materials, 18 (6). pp. 445-454. ISSN 0950-0618