Browse by Journal Title

Atan, Rodziah and Azram, Nur Adila (2019) A framework for halal knowledge metadata representations. Applied Mechanics and Materials, 892. pp. 8-15. ISSN 1660-9336

Abdalla, Ayad Omran and Amrin, Astuty and Muhammad, Sallehuddin and Mohd Ariff, Azmah Hanim (2017) Iron as a promising alloying element for the cost reduction of titanium alloys: a review. Applied Mechanics and Materials, 864. 147 - 153. ISSN 1660-9336; ESSN: 1662-7482

Asr, Mahdi Torabi and Osloob, Reza and Mustapha, Faizal (2016) Double - stage H-Darrieus wind turbine - rotor aerodynamics. Applied Mechanics and Materials, 829. pp. 21-26. ISSN 1660-9336; ESSN: 1662-7482

Abas, Ani Shazwani and Mohd Yunos, Mohd Yazid and Mohd Isa, Nor Kalsum and Ismail, Nor Atiah and Abdul Aziz, Faziawati (2015) Carbon-capability framework for Malaysia: towards encouraging low-carbon community lifestyles. Applied Mechanics and Materials, 747. 290 - 293. ISSN 1660-9336; ESSN:1662-7482

Arshad, S. N. M. and Abd. kadir, Mohd. Zainal Abidin and Izadi, Mahdi and Ariffen, A. M. and Hamzah, M. N. and Gomes, Chandima and Jasni, J. and Rameli, N. (2015) Characterization preliminary breakdown in the measured lightning electric fields on Malaysia data. Applied Mechanics and Materials, 793 (1). pp. 19-23. ISSN 1660-9336; ESSN: 1662-7482

Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Azis, Norhafiz and Rameli, Norhidayu and Izadi, Mahdi and Md Arshad @ Hashim, Syahrun Nizam (2015) Consideration of lightning current along a tall structure in the presence of horizontal arrangement grounding. Applied Mechanics and Materials, 793. pp. 34-38. ISSN 1660-9336

Abu, Mohd Azlan and Harun, Harlisya and Harmin, Mohammad Yazdi and Abdul Wahab, Noor Izzri (2015) Power consumption optimization technique in ACS for space time trellis code viterbi decoder. Applied Mechanics and Materials, 785. pp. 734-738. ISSN 1660-9336; ESSN: 1662-7482

Abd Rahman, Muhammad Syahmi and Izadi, Mahdi and Ab Kadir, Mohd Zainal Abidin (2015) The electrical behaviour of polymer insulator under different weather conditions. Applied Mechanics and Materials, 793. pp. 60-64. ISSN 1660-9336; ESSN: 1662-7482

Ahmad, Siti Azfanizam and Pham, Duc Truong and Abdul Aziz, Faieza (2014) Combination of adaptive enlargement and reduction in the search neighbourhood in the bees algorithm. Applied Mechanics and Materials, 564. pp. 614-618. ISSN 1660-9336; ESSN: 1662-7482

Abdul Aziz, Faieza and Rashid, Sahrol Nizam and Zulkifli, Norzima (2014) Communication system improvement for air traffic service to provide a continuous surveillance over the oceanic area. Applied Mechanics and Materials, 564. pp. 604-607. ISSN 1660-9336; ESSN: 1662-7482

Ahmad, Mohamed Tarmizi and Ahmadian, Sevda and Md Zhahir, Md Amzari and Ariff, Omar Kassim and Romli, Fairuz Izzudin (2014) Computational approach in sizing of pulsejet engine. Applied Mechanics and Materials, 629. pp. 131-136. ISSN 1660-9336; ESSN: 1662-7482

Ahmad, Mohamed Tarmizi and Lam, Michael and Mohd Harithuddin, Ahmad Salahuddin and Md Zhahir, Md Amzari and Ariff, Omar Kassim (2014) Flight data monitoring/tracker system for search and rescue mission. Applied Mechanics and Materials, 629. pp. 350-354. ISSN 1660-9336; ESSN: 1662-7482

Abdul Rahman, Mohd Amirul and Mohd Rafie, Azmin Shakrine and Varatharajoo, Renuganth (2014) LCO flutter analysis on coir pressed mat fibre/epoxy composites plate. Applied Mechanics and Materials, 629. pp. 71-77. ISSN 1660-9336; ESSN: 1662-7482

Abdullah, Adibah and Inayatullah, Othman and Masuri, Siti Ujila and Abdul Aziz, Nuraini and Sahari, Barkawi and Jamaludin, Nordin (2014) Single-grade engine lubricant: introduce viscosity index numerical order (VIno). Applied Mechanics and Materials, 564. pp. 83-88. ISSN 1660-9336; ESSN: 1662-7482

Aw, Aaron Teik Hong and Varatharajoo, Renuganth (2014) Tether tension performance utilizing various materials for a coplanar and non-coplanar model of a flexible tethered satellite system. Applied Mechanics and Materials, 629. pp. 281-285. ISSN 1660-9336; ESSN: 1662-7482

Ang, Mei Choo and Ng, Kok Weng and Ahmad, Siti Azfanizam and Abdul Wahab, Amelia Natasya (2014) Using TRIZ to generate ideas to solve the problem of the shortage of ICT workers. Applied Mechanics and Materials, 564. pp. 733-739. ISSN 1660-9336; ESSN: 1662-7482

Abdul Rahman, Najihah and Abdul Aziz, Nuraini and Inayatullah, Othman (2014) An analytical model of homogeneous charge compression ignition engine for performance prediction. Applied Mechanics and Materials, 564. pp. 8-12. ISSN 1660-9336; ESSN: 1662-7482

Al-Hada, Naif Mohammed and Saion, Elias and Shaari, Abdul Halim and Ahmad Kamarudin, Mazliana and Gene, Adamu Salahudeen (2014) The influence of calcination temperature on the formation of zinc oxide nanoparticles by thermal-treatment. Applied Mechanics and Materials, 446-447. pp. 181-184. ISSN 1660-9336; ESSN: 1662-7482

Abdullah, Abdul Hakim and Zulkefli, Zamir Aimaduddin (2014) A study of the acoustics and speech intelligibility quality of mosques in Malaysia. Applied Mechanics and Materials, 564. pp. 129-134. ISSN 1660-9336; ESSN: 1662-7482

Abdul Khader, Shah Mohammed A. and Ayachit, Anurag and Pai, Raghuvir and Zubair, Mohammed and Ahmad, Kamarul Arifin and Rao, Vedularajanikanth (2013) Study of the influence of normal and high blood pressure on normal and stenosed carotid bifurcation using fluid-structure interaction. Applied Mechanics and Materials, 315. pp. 982-986. ISSN 1660-9336; ESSN: 1662-7482

Abdullah, Ahmad Baharuddin and Salit, Mohd Sapuan and Samad, Zahurin and M. Tandur, Khaleed Hussain and Abdul Aziz, Nuraini (2012) Investigation of geometrical defect of AA6061-T4 cold embossing using FEM. Applied Mechanics and Materials, 110-116. pp. 2337-2341. ISSN 1660-9336; ESSN: 1662-7482

Abdullah, Azhar and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Vijayaram, Thoguluva Raghavan (2011) Effect of moisture content on the permeability of tailing sand samples gathered from ex tin mines in Perak state Malaysia. Applied Mechanics and Materials, 66-68. pp. 1384-1389. ISSN 1660-9336; ESSN: 1662-7482

Boroojerdian, Mohammad Mahdi and Adam, Nor Mariah and Mohd. Rafie, Azmin Shakrine (2014) Wind tunnel study on the pressure coefficient performance of different venturi shaped roof configurations for wind induced natural ventilation. Applied Mechanics and Materials, 564. pp. 287-291. ISSN 1660-9336; ESSN:1662-7482

Ban, Ying Siang and Varatharajoo, Renuganth (2012) Optimal control for combined energy storage and attitude control system (CEACS) in small satellites. Applied Mechanics and Materials, 110-116. pp. 3587-3592. ISSN 1660-9336; ESSN: 1662-7482

Chia, Soon Chai and Ab Kadir, Mohd Zainal Abidin and Izadi, Mahdi (2015) Evaluation of gas pipeline induced voltage associated with parallel transmission line. Applied Mechanics and Materials, 793. pp. 90-94. ISSN 1660-9336; ESSN: 1662-7482

Che Ibrahim, Muhd Fathil and Baharudin, B. T. Hang Tuah and Shari, Na'ain (2014) Analysis on tool life and surface characteristic in milling Stavax Supreme material. Applied Mechanics and Materials, 564. pp. 475-480. ISSN 1660-9336; ESSN: 1662-7482

Cheng, S. T. and Abdul Jalil, Nawal Aswan and Zulkefli, Zamir Aimaduddin (2014) Identification of corrosion on a hollow tube using vibration. Applied Mechanics and Materials, 564. pp. 176-181. ISSN 1660-9336; ESSN: 1662-7482

Cionita, Tezara and Adam, Nor Mariah and Jalaludin, Juliana and Mansor, Mariani and Siregar, Januar Parlaungan (2014) Measurement of indoor air quality parameters in daycare centres in Kuala Lumpur Malaysia. Applied Mechanics and Materials, 564. pp. 245-249. ISSN 1660-9336; ESSN: 1662-7482

Che Saffry, Zetty Azleen and Abdul Majid, Dayang Laila Abang and Romli, Fairuz Izzudin and Mustapha, Faizal and Abdullah, Ermira Junita (2013) Identification of modal properties of composite thin plate using OMA in wind tunnel environment. Applied Mechanics and Materials, 446-447. pp. 606-610. ISSN 1660-9336; ESSN: 1662-7482

Djojodihardjo, Harijono and Abd Bari, Muhammad Anas and Mohd Rafie, Azmin Shakrine and Wiriadidjaja, Surjatin (2014) Further development of the kinematic and aerodynamic modeling and analysis of flapping wing ornithopter from basic principles. Applied Mechanics and Materials, 629. pp. 9-17. ISSN 1660-9336; ESSN: 1662-7482

Emmanuel, Osaji and Othman, Mohammad Lutfi and Hizam, Hashim and Othman, Muhammad Murtadha (2015) Artificial neural network application in coordination of directional overcurrent protective relays in electrical mesh distribution network. Applied Mechanics and Materials, 785. pp. 48-52. ISSN 1660-9336; ESSN: 1662-7482

El-Shekeil, Yousuf Ali Gumaan and Salit, Mohd Sapuan and Haron, M. (2014) Effect of fiber loading on tensile properties of cocoa pod husk fibers reinforced thermoplastic polyurethane composites. Applied Mechanics and Materials, 564. pp. 346-349. ISSN 1660-9336; ESSN: 1662-7482

El-Shekeil, Yousuf Ali Gumaan and Salit, Mohd Sapuan (2014) Effect of fiber treatment on stress-strain behavior of kenaf fibers reinforced thermoplastic polyurethane composites. Applied Mechanics and Materials, 575. pp. 46-49. ISSN 1660-9336; ESSN: 1662-7482

Edama, Nurul Aini and Sulaiman, Alawi and Ku Hamid, Ku Halim and Abd Rahim, Siti Noraida and Samsu Baharuddin, Azhari and Mokhtar, Mohd Noriznan (2014) Encapsulation of multi-enzymes on waste clay material: preparation, characterization and application for tapioca starch hydrolysis. Applied Mechanics and Materials, 548-549. pp. 77-82. ISSN 1660-9336; ESSN: 1662-7482

El-Shekeil, Yousuf Ali Gumaan and Salit, Mohd Sapuan and Haron, M. (2014) Optimization of processing parameters and fiber content of cocoa pod husk fiber-reinforced thermoplastic polyurethane composites by Taguchi method. Applied Mechanics and Materials, 564. pp. 394-399. ISSN 1660-9336; ESSN: 1662-7482

Eshghi, Samira and Varatharajoo, Renuganth (2014) Sliding mode control techniques for combined energy and attitude control system. Applied Mechanics and Materials, 629. pp. 310-317. ISSN 1660-9336; ESSN: 1662-7482

Firoozi, Zahra and Ismail, Napsiah and Ariafar, Shahram and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Memariani, Azizollah (2014) Cost analysis of two different configurations for a distribution network design. Applied Mechanics and Materials, 564. pp. 656-660. ISSN 1660-9336; ESSN: 1662-7482

Faat, Shamsul Bahri and Md Zhahir, Md Amzari and Ahmad, Mohamed Tarmizi and Mohd Ajir, Mohd Ramly (2014) Stores separation simulation development: a roadmap to system realisation via intelligent data management system. Applied Mechanics and Materials, 629. pp. 333-337. ISSN 1660-9336; ESSN: 1662-7482

Golestaneh, Seyed Jafar and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar and Tang, Sai Hong and Naeini, Hassan Moslemi and Maghsoudi, Ali Asghar and Firoozi, Zahra (2014) Higher desirability in solving multiple response optimization problems with committee machine. Applied Mechanics and Materials, 564. pp. 608-613. ISSN 1660-9336; ESSN: 1662-7482

Golshan, Abolfazl and Ghodsiyeh, Danial and Gohari, Soheil and Ayob, Amran and Baharudin, B. T. Hang Tuah (2013) Computational inteligence in optimization of machining operation parameters of ST-37 steel. Applied Mechanics and Materials, 248. pp. 456-461. ISSN 1660-9336; ESSN: 1662-7482

Ganjeh, Babak and Hassan, Mohd Roshdi (2013) Cost-efficient composite processing techniques for aerospace applications – a review. Applied Mechanics and Materials, 325-326. pp. 1465-1470. ISSN 1660-9336; ESSN: 1662-7482

Hamzah, Muhammad Noh and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Md. Arshad, Syahrun Nizam (2015) Unique stroke-multiplicity of positive lightning in Malaysia. Applied Mechanics and Materials, 793. pp. 39-43. ISSN 1660-9336; ESSN: 1662-7482

Hassan, Omer Abdalla Alawad and Abdulrahman, Alhozaimy and Jaafar, Mohd Saleh and Noor Abdul Aziz, Farah and Al-Negheimish, Abdulaziz (2015) Blended cement containing high volume ground dune sand and ground granulated blast furnace slag for autoclave concrete industry. Applied Mechanics and Materials, 754-755. pp. 395-399. ISSN 1660-9336; ESSN: 1662-7482

Hassan, Mohamed P. and Mahmud, Abdullah Saad and Mohd Rafie, Azmin Shakrine and Zahari, Rizal (2014) Alternative numerical validation methodology for short-term development projects. Applied Mechanics and Materials, 564. pp. 638-643. ISSN 1660-9336; ESSN: 1662-7482

Hanafi, Marsyita and Wan Adnan, Wan Azizun (2014) Boosted features for face authentication. Applied Mechanics and Materials, 666. pp. 276-281. ISSN 1660-9336; ESSN: 1662-7482

Hameed Sultan, Mohamed Thariq and Basri, Shah Nor and Mohd Rafie, Azmin Shakrine and Yidris, Noorfaizal and Mustapha, Faizal and Zahari, Rizal and Mohd Ajir, Mohd Ramly (2014) Impact damage analysis for glass reinforced epoxy laminated plates using single stage gas gun. Applied Mechanics and Materials, 564. pp. 382-387. ISSN 1660-9336; ESSN: 1662-7482

Hamdan, Ahmad and Mustapha, Faizal and Ahmad, Kamarul Arifin and Mohd Rafie, Azmin Shakrine and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan (2014) A review on the self energize structural health monitoring (SHM) in vertical axis wind turbine (VAWT) system. Applied Mechanics and Materials, 564. pp. 157-163. ISSN 1660-9336; ESSN: 1662-7482

Jafari, Neda and Mohd Yunus, Mohd.Yazid and Othuman Mydin, Md Azree and Mohd. Tahir, Osman (2015) Assessing the residents's preference of awareness regarding urban agriculture at rooftop garden. Applied Mechanics and Materials, 747. pp. 180-183. ISSN 1660-9336; ESSN: 1662-7482

Jafari, Nastaran and Utaberta, Nangkula (2015) Identifying functional factor for developing the community centre in Kuala Lumpur. Applied Mechanics and Materials, 747. pp. 141-144. ISSN 1660-9336; ESSN: 1662-7482

Jibrin, Sani and Abd. Moksin, Mohd Maarof and Husin, Mohd Shahril and Zakaria, Azmi and Hassan, Jumiah and Talib, Zainal Abidin (2014) Effect of electron thermal carriers on thermal diffusivity of metals. Applied Mechanics and Materials, 446-447. pp. 219-223. ISSN 1660-9336; ESSN: 1662-7482

Jaafar, Che Nor Aiza and Zainol, Ismail and Sulaiman, Shamsuddin and Ayub, M. Ikhwan (2014) Effects of PVA-PEG binders system on microstructure and properties of sintered alumina. Applied Mechanics and Materials, 564. pp. 355-360. ISSN 1660-9336; ESSN: 1662-7482

Jalaluddin, Mai Nursherida and Abdul Aziz, Nuraini and Sahari, Barkawi and Ali, Aidy and Abdul Aziz, Faieza and Tuan Ismail, Tuan Hafandi and Azizi, Azim and Mohd Salleh, Salwani and M. S., Nabilah and S. S., Aini and M., Shahril and M. H., Norhidayah (2012) Determination of leg injury criteria subjected to frontal impacts. Applied Mechanics and Materials, 165. pp. 265-269. ISSN 1660-9336; ESSN: 1662-7482

Jahromi, Seyed Mojtaba Zabihinpour and Saghaei, Abbas and Mohd Ariffin, Mohd Khairol Anuar (2012) A review on fuzzy control charts for monitoring attribute data. Applied Mechanics and Materials, 159. pp. 23-28. ISSN 1660-9336; ESSN: 1662-7482

Khalid, Fatimah and Hassan, Noor Amjed and Madzin, Hizmawati and O.K. Rahmat, Rahmita Wirza (2019) A robust geometric skin colour face detection method under unconstrained environment of smartphone database. Applied Mechanics and Materials, 892. pp. 31-37. ISSN 1660-9336

Katim, N. I. A. and Ishak, M. T. and Ishak, A. M. and A. Kadir, M. Z. A. (2015) Behavior of biodegradable oil under impulse voltages. Applied Mechanics and Materials, 785. pp. 320-324. ISSN 1660-9336; ESSN: 1662-7482

Kasim, Nazrul Idzham and Leman, Zulkiflle and Musa, Mohd Azam and Baharudin, B. T. Hang Tuah (2014) Cab transfer process improvement at an automotive manufacturing facility. Applied Mechanics and Materials, 564. pp. 105-109. ISSN 1660-9336; ESSN: 1662-7482

Kamarbhari, Syakirah and Abdul Aziz, Faieza and Mohd Yusuff, Rosnah (2014) Development of an ergonomic infant seat with restraint system for use inan aircraft. Applied Mechanics and Materials, 564. pp. 99-104. ISSN 1660-9336; ESSN: 1662-7482

Khalid, Roszelinda and Ahmad Zulkarnain, Zuriati (2014) Enhanced tight finite key scheme for quantum key distribution (QKD) protocol to authenticate multi-party system in cloud infrastructure. Applied Mechanics and Materials, 481. pp. 220-224. ISSN 1660-9336; ESSN: 1662-7482

Kasman, Zeti @ Noorizeti and Abdul Aziz, Faieza (2014) Skills improvement of instructor to provide technical consultation with industries. Applied Mechanics and Materials, 564. pp. 711-716. ISSN 1660-9336; ESSN: 1662-7482

Kakahy, Amer Najat Najmaldeen and Ahmad, Desa and Hamid, Md. Akhir and Sulaiman, Shamsuddin and Aris, Ishak (2013) Effects of knife shapes and cutting speeds of a mower on the percentage pulverization of sweet potato vine. Applied Mechanics and Materials, 421. pp. 29-33. ISSN 1660-9336; ESSN: 1662-7482

Karimi, Abbas and Kiamanesh, B. and Zarafshan, Faraneh and Syed Mohamed, Syed Abdul Rahman Al-Haddad (2013) Markov process modeling for wireless sensor network availability with QOS constraints. Applied Mechanics and Materials, 330. pp. 1054-1058. ISSN 1660-9336; ESSN: 1662-7482

Lilehkoohi, A. H. and Abdul Aziz, Faieza and Sahari, Barkawi and Abdul Aziz, Nuraini and Halali, Mohammad (2014) Investigation of thickness influences on energy absorption for side doors and B pillar in Euro NCAP Pole Side Impact Test. Applied Mechanics and Materials, 663. pp. 585-589. ISSN 1660-9336; ESSN: 1662-7482

Lee, Swee Kei and Abdul Jalil, Nawal Aswan (2014) Lateral collision with side airbag: a literature review. Applied Mechanics and Materials, 564. pp. 48-53. ISSN 1660-9336; ESSN: 1662-7482

Mohd Aris, Teh Noranis and Zolkepli, Maslina and Che Pa, Noraini (2019) Fuzzy AHP in a knowledge-based framework for early flood warning. Applied Mechanics and Materials, 892. pp. 143-149. ISSN 1660-9336; ESSN: 1662-7482

Mohd Ghazali, Nor Fadillah and Siew, Yien Wong and Amir Hamzah, Sharaai (2015) To develop a greener recycled paper production by determining potential environmental impacts through life cycle perspective. Applied Mechanics and Materials, 747. pp. 269-272. ISSN 1660-9336; ESSN: 1662-7482

Mansor, Noranita and Ibrahim, Rahinah and Awang, Abdul Rahim (2015) The integration of universal design in interior design as a green design approach for diverse users in Malaysia. Applied Mechanics and Materials, 747. pp. 149-152. ISSN 1660-9336; ESSN: 1662-7482

Mohd Tamrin, Shamsul Bahri and Ng, Yee Guan and Norzan, Muhammad Luthfi and Abu Bakar, Shahriman and Deros, Baba M. and Rambely, Azmin Sham and Zuradzman, Mohamad Razlan and Wan Khairulnizam and Desa, Hazry and Cheng, Ee Meng and M., Afendi (2015) Conceptual design for oil palm evacuation to improve ergonomics issues of collecting fresh fruit bunch. Applied Mechanics and Materials, 786. pp. 281-286. ISSN 1660-9336

Mydin, Md Azree Othuman and Jasme, Shafarina and Mohd Nawi, Mohd Nasrun and Utaberta, Nangkula and Mohd Yunus, Mohd Yazid (2015) Legal provision allied to conservation of heritage buildings in Penang. Applied Mechanics and Materials, 747 (April). pp. 198-201. ISSN 1660-9336

Mohd Yunus, Mohd Yazid and Mohd Yusof, Mohd Johari and Mydin, Md Azree Othuman and Afsar, Bijan (2015) Perceived pedestrian environment functional factors which are associated with walking in tropical university campus. Applied Mechanics and Materials, 747. pp. 161-164. ISSN 1660-9336

Mohammad Noor, Siti Zaliha and Omar, Ahmad Maliki and Mohd Radzi, Mohd Amran (2015) Single-phase single stage string inverter for grid connected photovoltaic system. Applied Mechanics and Materials, 785. pp. 177-181. ISSN 1660-9336; ESSN: 1662-7482

Mohd Ariffen, Amizah and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Jasni, Jasronita and Md Arshad @ Hashim, Syahrun Nizam (2015) The electric field effect on angles of copper-type down-conductor. Applied Mechanics and Materials, 793. pp. 24-28. ISSN 1660-9336; ESSN: 1662-7482

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdul Aziz, Nuraini and Arep @ Ariff, Hambali and Alias, Mohd Fuad (2015) A simplified life cycle analysis of an automotive parking brake lever using polymer composites. Applied Mechanics and Materials, 699. pp. 395-400. ISSN 1660-9336; ESSN: 1662-7482

Mohamad, Nur Aqilah and Azis, Norhafiz and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Yunus, Robiah and Ishak, Mohd Taufiq and Yaakub, Zaini (2015) A study on the dielectric properties of RBDPO olein under low temperature thermal ageing. Applied Mechanics and Materials, 793. pp. 14-18. ISSN 1660-9336; ESSN: 1662-7482

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syam and Abdul Aziz, Nuraini and Arep @ Ariff, Hambali (2014) Thermoplastic matrix material selection using multi criteria decision making method for hybrid polymer composites. Applied Mechanics and Materials, 564. pp. 439-443. ISSN 1660-9336; ESSN: 1662-7482

Malek, F.H.A. and Zainudin, Edi Syams and Md. Tahir, Paridah and Jawaid, Mohammad (2014) The effect of additives on bending strenght of pultruded hybrid reinforced resol type phenolic composite. Applied Mechanics and Materials, 564. pp. 418-421. ISSN 1660-9336; ESSN: 1662-7482

Marimuthu, Navanitha and Abdullah, Ermira Junita and Abang Abdul Majid, Dayang Laila and Romli, Fairuz Izzudin (2014) Conceptual design of flapping wing using shape memory alloy actuator for micro unmanned aerial vehicle. Applied Mechanics and Materials, 629. pp. 152-157. ISSN 1660-9336; ESSN: 1662-7482

Mohd Ariffin, Mohd Khairol Anuar and Tan, Yee Lee and Mohamed, Saiful Bahri (2014) Design improvement of automatic transmission system for remote controlled car. Applied Mechanics and Materials, 564. pp. 25-30. ISSN 1660-9336; ESSN: 1662-7482

Mohd Noor, Noordin Asimi and Razali, Mohd Hudzari and Salit, Mohd Sapuan and M. Abd Halim, Abdul Ssomad (2014) Design, analysis and fabrication of conceptual innovative hand tool. Applied Mechanics and Materials, 564. pp. 752-757. ISSN 1660-9336; ESSN: 1662-7482

Mohid, Zazuli and Md. Warap, Norizan and Ismail, Mohd Idris Shah and Ibrahim, Rasidi and Abdul Rahim, Erween (2014) Determination of heat flux intensity distribution and laser absorption rate of AISI D2 tool steel. Applied Mechanics and Materials, 465-466. pp. 730-734. ISSN 1660-9336; ESSN: 1662-7482

Mohd Ariffin, Mohd Khairol Anuar and Che Hussain, Hazami and Mohamed, Saiful Bahri and Sulaiman, Shamsuddin (2014) Determining optimum electro discharge machining parameters for drilling of a small hole by utilizing Taguchi method. Applied Mechanics and Materials, 564. pp. 481-487. ISSN 1660-9336; ESSN: 1662-7482

Mat, Fauziah and Ismail, Khairul Azwan and Ahmad, Masniezam and Yaacob, Sazali and Inayatullah, Othman (2014) Dynamic axial crushing of empty and foam-filled conical aluminium tubes: experimental and numerical analysis. Applied Mechanics and Materials, 566. pp. 305-309. ISSN 1660-9336; ESSN: 1662-7482

Mohd. Nasir, Noor Azline and McCarthy, M. J. (2014) Effect of metakaolin on early strength of GGBS ternary concrete. Applied Mechanics and Materials, 584-586. pp. 1551-1557. ISSN 1660-9336; ESSN: 1662-7482

Masuri, Siti Ujila and Sellier, Mathieu (2014) Effects of physicochemical parameters on colloidal potentials. Applied Mechanics and Materials, 564. pp. 222-227. ISSN 1660-9336; ESSN: 1662-7482

Muda, Mohd Khairul Hafiz and Mustapha, Faizal and Mohd Aris, Khairul Dahri and Hameed Sultan, Mohamed Thariq (2014) Fabrication technique for bio-composite patch repair on laminated structures of CFRP plate. Applied Mechanics and Materials, 564. pp. 366-371. ISSN 1660-9336; ESSN: 1662-7482

Mohd Ariffin, Mohd Khairol Anuar and Sulaiman, Shamsuddin and Mohd Ruslan, Mohd Shahfizal (2014) Finite element analysis of sheet metal formability effect on automotive part. Applied Mechanics and Materials, 660. pp. 788-793. ISSN 1660-9336; ESSN: 1662-7482

Mohd Kassim, Nur Nadia and Ishak, Mohamad Ridzwan and Misri, Sairizal (2014) Kenaf fibre: its potential and review on bending fatigue of hollow shaft composites. Applied Mechanics and Materials, 629. pp. 395-398. ISSN 1660-9336; ESSN: 1662-7482

Mohammad, Mazian and Abdullah, Shahrum and Jamaludin, Nordin and Inayatullah, Othman (2014) Life prediction of SAE 1045 carbon steel using the acoustic emission parameter. Applied Mechanics and Materials, 471. pp. 329-334. ISSN 1660-9336; ESSN: 1662-7482

Menhat, Masha Nur Salsabiela and Mohd Ariffin, Mohd Khairol Anuar and Sulaiman, Shamsuddin and Tang, Sai Hong (2014) Managing uncertainty in supply chain management of vessel chartering in oil & gas industry. Applied Mechanics and Materials, 564. pp. 694-699. ISSN 1660-9336; ESSN: 1662-7482

Magid, Hani Mizhir and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah (2014) Modeling and simulation of forward Al extrusion process using FEM. Applied Mechanics and Materials, 564. pp. 525-532. ISSN 1660-9336; ESSN: 1662-7482

Mohid, Zazuli and Md. Warap, Norizan and Hassan, Suhaimi and Ismail, Mohd Idris Shah and Ibrahim, Rasidi and Abdul Rahim, Erween (2014) Numerical analysis of laser heating for laser assisted micro milling application. Applied Mechanics and Materials, 465-466. pp. 720-724. ISSN 1660-9336; ESSN: 1662-7482

Md Deros, Mohd Azaman and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Zainudin, Edi Syams and Abdan, Khalina (2014) Numerical simulation on moulded thin-walled parts via injection moulding process. Applied Mechanics and Materials, 575. pp. 73-77. ISSN 1660-9336; ESSN: 1662-7482

Mohd Rosli, Mohd Uzair and Mohd Ariffin, Mohd Khairol Anuar and Salit, Mohd Sapuan and Sulaiman, Shamsuddin (2014) Problems evaluation for TRIZ method using AHP: case study on car's dashboard improvement design concepts. Applied Mechanics and Materials, 564. pp. 89-93. ISSN 1660-9336; ESSN: 1662-7482

Md Ali, Syaril Azrad and Abas, Mohammad Fadhil and Kendoul, Farid and Nonami, Kenzo (2014) Quadrotor UAV indoor localization using embedded stereo camera. Applied Mechanics and Materials, 629. pp. 270-277. ISSN 1660-9336; ESSN: 1662-7482

Mohd Jamal, Qistina and Abang Abdul Majid, Dayang Laila and Mohd Haris, Mohd Yusoff and Yidris, Noorfaizal and Hameed Sultan, Mohamed Thariq (2014) Quasi static analysis of a biocomposite aircraft radome. Applied Mechanics and Materials, 629. pp. 78-81. ISSN 1660-9336; ESSN: 1662-7482

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdul Aziz, Nuraini and Arep @ Ariff, Hambali (2014) Rigidity analysis of kenaf thermoplastic composites using Halpin-Tsai equation. Applied Mechanics and Materials, 548-549. pp. 29-33. ISSN 1660-9336; ESSN: 1662-7482

Misri, Sairizal and Salit, Mohd Sapuan and Leman, Zulkiflle and Ishak, Mohamad Ridzwan (2014) Tensile properties of kenaf yarn fibre reinforced unsaturated polyester composites at different fibre orientations. Applied Mechanics and Materials, 564. pp. 412-417. ISSN 1660-9336; ESSN: 1662-7482

Mohd Tahir, Suraya and Shohreh, Nosrati and Mohamed Ariff, Azmah Hanim and Hashim, Mansor (2014) Thermal stability of CK60 steel Nano-Crystallized by drilling method. Applied Mechanics and Materials, 564. pp. 461-466. ISSN 1660-9336; ESSN: 1662-7482

Mohd Tahir, Suraya and Anuar, Mohd Shamsul and Simmadorai, Dinesh (2014) The ejection and strength of binary iron-cellulose powder compacts. Applied Mechanics and Materials, 564. pp. 434-438. ISSN 1660-9336; ESSN: 1662-7482

M. Sayuti and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Vijayaram, Thoguluva Raghavan and Sulaiman, Suraya (2011) Influence of mechanical vibration moulding process on the tensile properties of TiC reinforced LM6 alloy composite castings. Applied Mechanics and Materials, 66-68. pp. 1207-1212. ISSN 1660-9336; ESSN: 1662-7482

Nangkula, Utaberta and Spalie, Nurhananie (2015) Understanding the potential of modern community center as social architectural spaces in Malaysia. Applied Mechanics and Materials, 747. pp. 52-55. ISSN 1660-9336; ESSN: 1662-7482

Nangkula, Utaberta and Handryant, Aisyah Nur and Othuman Mydin, Md Azree (2015) An analysis of grey water treatment system in the National University of Malaysia mosque. Applied Mechanics and Materials, 747. pp. 313-316. ISSN 1660-9336; ESSN: 1662-7482

Niya, Mahsa Dabbagh and Utaberta, Nangkula and Maulan, Suhardi (2015) Significance of the application of universal design in mosque buildings in Malaysia. Applied Mechanics and Materials, 747. pp. 72-75. ISSN 1660-9336; ESSN: 1662-7482

Nangkula, Utaberta and Handryant, Aisyah Nur and Mydin, Md Azree Othuman (2015) Post modern cross comparative analysis on the mosque ornamentation in Malaysia: (a case study of Charles Jencks). Applied Mechanics and Materials, 747. pp. 48-51. ISSN 1660-9336; ESSN: 1662-7482

Nemati, Jamshid and Sulaiman, Shamsuddin and Majzoobi, Gholam Hossein and Mohamed Ariff, Azmah Hanim and Baharudin, B. T. Hang Tuah (2014) Development of microstructure and fracture toughness of AL-6063 alloy using equal channel angular extrusion. Applied Mechanics and Materials, 564. pp. 488-494. ISSN 1660-9336; ESSN: 1662-7482

Nadarajah, Jayasalen and Abdul Aziz, Faieza and Baharudin, B. T. Hang Tuah and Mohd Radzi, Mohd Amran (2014) Improved maintenance for energy optimization in the calcium compound processing industry. Applied Mechanics and Materials, 564. pp. 747-751. ISSN 1660-9336; ESSN: 1662-7482

Nemati, Jamshid and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohamed Ariff, Azmah Hanim and Majzoobi, Gholam Hossein (2014) Microhardness characteristics of AL-6063 alloy processed by equal channel angular extrusion. Applied Mechanics and Materials, 564. pp. 513-518. ISSN 1660-9336; ESSN: 1662-7482

Nahavandi, Mahdi and Mohamed Ariff, Azmah Hanim and Zahari, Nur Ismarrubie and Baserfalak, F. (2014) Microstructural evaluation of Bi-Ag and Bi-Sb lead-free high-temperature solder candidates on copper substrate with multiple reflow number. Applied Mechanics and Materials, 564. pp. 388-393. ISSN 1660-9336; ESSN: 1662-7482

Najafabadi, Mohammad Izadi and Abdul Aziz, Nuraini and Adam, Nor Mariah and Leman, Abdul Mutalib (2013) Effects of intake temperature and equivalence ratio on HCCI ignition timing and emissions of a 2-stroke engine. Applied Mechanics and Materials, 315. pp. 498-502. ISSN 1660-9336; ESSN: 1662-7482

Noroziroshan, Alireza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Mustapha, Faizal (2012) A hybrid GA-SA algorithm for multi-objective sequencing problem in high-product mix shop-floor. Applied Mechanics and Materials, 110-116. pp. 3964-3971. ISSN 1660-9336; ESSN: 1662-7482

Oleiwi, Maryam Qays and Ali, Ayat and Utaberta, Nangkula and Surat, Mastor (2015) The application of principles of green building in traditional housing in Iraq. Applied Mechanics and Materials, 747. pp. 7-11. ISSN 1660-9336; ESSN: 1662-7482

Osman, Mubarak Mohamed and Hassanpour, Badiossadat and Nangkula, Utaberta (2015) A study on African vernacular mosque: A lesson from tradition. Applied Mechanics and Materials, 747. pp. 157-160. ISSN 1660-9336; ESSN: 1662-7482

Ozsoy, Ahmet and Demirer, Sabahattin and Adam, Nor Mariah (2014) An experimental study on double-glazed flat plate solar water heating system in Turkey. Applied Mechanics and Materials, 564. pp. 204-209. ISSN 1660-9336; ESSN: 1662-7482

Romli, Fairuz Izzudin (2014) Conceptual aircraft design exploration through functional approach. Applied Mechanics and Materials, 446-447. pp. 602-605. ISSN 1660-9336; ESSN: 1662-7482

Razali, Noorshazlin and Hameed Sultan, Mohamed Thariq and Safri, Syafiqah Nur Azrie and Basri, Shahnor and Yidris, Noorfaizal and Mustapha, Faizal (2014) High velocity impact test on glass fibre reinforced polymer (GFRP) using a single stage gas gun (SSGG) - an experimental based approach. Applied Mechanics and Materials, 564. pp. 376-381. ISSN 1660-9336; ESSN: 1662-7482

Rosli, Mohd Uzair and Mohd Ariffin, Mohd Khairol Anuar and Salit, Mohd Sapuan and Sulaiman, Shamsuddin (2014) Integrated TRIZ-AHP support system for conceptual design. Applied Mechanics and Materials, 548-549. pp. 1998-2002. ISSN 1660-9336; ESSN: 1662-7482

Raja Maamor Shah, Raja Noor Farah Azura and Nayan, Irwan and Raja Maamor Shah, Raja Lailatul Zuraida and Amira Shahirah and Mohd Hanafi @ Omar, Hafiz (2014) Modified virtual semi-circle approach for a reactive collision avoidance of a mobile robot in an outdoor environment. Applied Mechanics and Materials, 679. pp. 171-175. ISSN 1660-9336; ESSN: 1662-7482

Romli, Fairuz Izzudin and Yaakob, Mohd Saffuan (2014) Travel time and cost analysis of PAVE application in Malaysia. Applied Mechanics and Materials, 629. pp. 246-251. ISSN 1660-9336; ESSN: 1662-7482

Romli, Fairuz Izzuddin and Cheang, Kian Hou and Chew, Junxian (2012) CROPS - a decision-making aid tool for product redesign. Applied Mechanics and Materials, 110-116. pp. 5136-5140. ISSN 1660-9336; ESSN: 1662-7482

Syed Mohamed, Muhammad Syafiq and Mohd Tamrin, Shamsul Bahri and Abdul Rahman, Ahmad Rizal and Abdul Jalil, Nawal Aswan (2015) Issues surrounding car center stack designs in Malaysia: an exploratory study. Applied Mechanics and Materials, 761. pp. 693-697. ISSN 1660-9336; ESSN: 1662-7482

Sabry, Ahmad H. and Wan Hasan, Wan Zuha and Ab Kadir, Mohd Zainal Abidin and Mohd Radzi, Mohd Amran and Shafie, Suhaidi (2015) Alternative solar-battery charge controller to improve system efficiency. Applied Mechanics and Materials, 785. pp. 156-161. ISSN 1660-9336; ESSN: 1662-7482

Sharaai, Amir Hamzah and Mat Zainol, Mohd Zulfadhli and Muhammad, Khairul Izzuddin (2015) Towards a green quail meat production through life cycle perspective. Applied Mechanics and Materials, 747. pp. 282-285. ISSN 1660-9336; ESSN: 1662-7482

Subramonian, Sivarao and Dimin @ Mohd. Amin, Mohd Fairuz and Faris, N. M. F. and Arep @ Ariff, Hambali and Malingam, Sivakumar Dhar and Salit, Mohd Sapuan (2015) Analytical hierarchy process for design selection of micro hot-marking tool. Applied Mechanics and Materials, 699. pp. 897-902. ISSN 1660-9336; ESSN: 1662-7482

Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Nadlene, R. and Jawaid, M. (2015) Mercerization effect on morphology and tensile properties of roselle fibre. Applied Mechanics and Materials, 754-755. pp. 955-959. ISSN 1660-9336

Safri, Syafiqah Nur Azrie and Hameed Sultan, Mohamed Thariq and Razali, Noorshazlin and Basri, Shahnor and Yidris, Noorfaizal and Mustapha, Faizal (2014) The effect of layers and bullet type on impact properties of Glass Fibre Reinforced Polymer (GFRP) using a Single Stage Gas Gun (SSGG). Applied Mechanics and Materials, 564. pp. 428-433. ISSN 1660-9336; ESSN: 1662-7482

Susilo, Sidik and Putra, Azma and Kok, Swee Leong and Nuawi, Mohd Zaki and Abdul Jalil, Nawal Aswan (2014) Acoustic energy harvesting using flexible panel and PVDF films: a preliminary study. Applied Mechanics and Materials, 554. pp. 712-716. ISSN 1660-9336; ESSN: 1662-7482

Serap, Raduan and Adam, Nor Mariah and Baharudin, B. T. Hang Tuah and Ramli, Abdul Rahman (2014) Current status of audit on board ferry services operating between Labuan and Mainland (Sabah, Sarawak and Brunei). Applied Mechanics and Materials, 564. pp. 19-24. ISSN 1660-9336; ESSN: 1662-748

Safri, Syafiqah Nur Azrie and Hameed Sultan, Mohamed Thariq and Aminanda, Yulfian (2014) Impact characterisation of glass fibre reinforced polymer (GFRP) type C-600 and E-800 using a drop weight machine. Applied Mechanics and Materials, 629. pp. 461-466. ISSN 1660-9336; ESSN: 1662-7482

Shari, Naain and Baharudin, B. T. Hang Tuah and Ngah, Norsilawati and Che Ibrahim, Muhd Fathil (2014) Machining of injection mould materials for different cutting flute in low-speed end milling. Applied Mechanics and Materials, 564. pp. 538-542. ISSN 1660-9336; ESSN: 1662-7482

Shasidharan, Gomesh Nair and Shafawi, Mohammad and Misrun, Muhammad Irwanto and Yusoff, Mohd Irwan and Zambak, Muhammad Fitra and Mariun, Norman (2014) Performance improvement of dye sensitized solar cell by using recycle material for counter electrode. Applied Mechanics and Materials, 446-447. pp. 823-826. ISSN 1660-9336; ESSN: 1662-7482

Sadrnia, Abdolhossein and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar and Zulkifli, Norzima and Boyer, Omid (2014) Reverse logistics network optimizing by genetic algorithm: a case study of automotive wiring harnesses. Applied Mechanics and Materials, 564. pp. 740-746. ISSN 1660-9336; ESSN: 1662-7482

Sanyang, Muhammed Lamin and Wan Ab. Karim Ghani, Wan Azlina and Idris, Azni and Ahmad, Mansor (2014) Zinc removal from wastewater using hydrogel modified biochar. Applied Mechanics and Materials, 625. pp. 842-846. ISSN 1660-9336; ESSN: 1662-7482

Sulaiman, Shamsuddin and Roshan Zamir, Amir Sayah and Borazjani, Soroosh (2013) Effect of cutting parameters on cutting temperature of TiAL6V4 alloy. Applied Mechanics and Materials, 392. pp. 68-72. ISSN 1660-9336; ESSN: 1662-7482

Sulaiman, Shamsuddin and Borazjani, Soroosh and Roshan Zamir, Amir Sayah and Heydaryan, Sahar (2013) Failure analysis of aluminum reinforced composite vessel. Applied Mechanics and Materials, 392. pp. 178-182. ISSN 1660-9336; ESSN: 1662-7482

Sulaiman, Shamsuddin and Roshan Zamir, Amir Sayah and Borazjani, Soroosh (2013) Finite element modeling and simulation of machining of titanium alloy and H13 tool steel using PCBN tool. Applied Mechanics and Materials, 392. pp. 36-40. ISSN 1660-9336; ESSN: 1662-7482

Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Tang, Sai Hong and Salleh, Aslinda (2013) Influence of pattern coating thickness on porosityand mechanical properties of lost foam casting of Al-Si (LM6) alloy. Applied Mechanics and Materials, 300-301. pp. 1281-1284. ISSN 1660-9336; ESSN: 1662-7482

Salih, Ahmad Abbas Al-Ameen and Jumaah, Fawaz Mohammed and Md Zhahir, Md Amzari and Gomes, Chandima (2013) The development of GPS navigation systems in civil aircraft. Applied Mechanics and Materials, 390. pp. 512-517. ISSN 1660-9336; ESSN: 1662-7482

Sahroni, Taufik Roni and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Arep @ Ariff, Hambali (2011) Design and simulation on investment casting mold for metal matrix composite material. Applied Mechanics and Materials, 66-68. pp. 1676-1681. ISSN 1660-9336; ESSN: 1662-7482

Talib, Noraini and Mohamed, Noorizan and Hussein, Mohd Kher and Abdul Shukor, Shureen Faris (2015) Post occupancy evaluation of Putra Perdana park. Applied Mechanics and Materials, 747. pp. 97-100. ISSN 1660-9336

Thien, Yee Von and Azis, Norhafiz and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Yunus, Robiah and Ishak, Mohd Taufiq and Hamzah, Ngah Ramzi (2015) A study on the lightning impulse breakdown voltages of palm oil and coconut oil by different methods. Applied Mechanics and Materials, 793. pp. 9-13. ISSN 1660-9336; ESSN: 1662-7482

Taha, Zahari and Alli, Hassan and Abdul Rashid, Salwa Hanim (2012) Users' requirements and preferences in the success of a new product: a case study of automotive design. Applied Mechanics and Materials, 215-216. pp. 484-488. ISSN 1660-9336; ESSN: 1662-7482

Utaberta, Nangkula and Nik Ramzi Shah, Nik Farah Elina and Mohd Rasdi, Mohd Tajuddin and Othuman Mydin, Md Azree (2015) A critical analysis of 20th century modern terrace housing in Malaysia. Applied Mechanics and Materials, 747. pp. 36-39. ISSN 1660-9336; ESSN: 1662-7482

Wan Ab. Rahman, Wan Nurhayati and Ng, Jenny Yi Shien (2015) Facilitate recycle activities via ICT and physical approach. Applied Mechanics and Materials, 747. pp. 273-276. ISSN 1660-9336; ESSN: 1662-7482

Wiriadidjaja, Surjatin and Mohd Rafie, Azmin Shakrine and Mustapha, Faizal and Hasim, Fadilah and Khan, Tabrej and Djojodihardjo, Harijono (2014) Basic geometries of the new closed circuit wind tunnel of the Universiti Putra Malaysia (UPM). Applied Mechanics and Materials, 629. pp. 376-381. ISSN 1660-9336; ESSN: 1662-7482

Yahya, Mohd Ainor and Othman, Muhammad Murtadha and Abdul Razak, Muhd Azri and Zakaria, Zilaila and Musirin, Ismail and Kari, Mat Nasir and Osman, Mohd Fazli and Abu Hassan, Mohd Zaini and Mohd Dzin, Siti Habsah and Azrae, Baihaki and Wan Ismail, Wan Shazli and Salleh, Mohd Hisham and Jafar, Shaharani and Othman, Mohammad Lutfi (2015) Ant colony optimization technique in optimal capacitor placement and sizing problem in unbalanced electrical distribution system. Applied Mechanics and Materials, 785. pp. 78-82. ISSN 1660-9336; ESSN: 1662-7482

Ya'acob, Mohammad Effendy and Hizam, Hashim and Yoshio, Hashimoto and Adam, Mohd Bakri and Othman, Noor Fadzlinda (2015) Field evaluation of five-level heat dissipation models under PV array structure installed in the tropics. Applied Mechanics and Materials, 789-790. pp. 416-421. ISSN 1660-9336; ESSN: 1662-7482

Yusof, N. S. B. and Mohd Rafie, Azmin Shakrine and Mohd Ariffin, Mohd Khairol Anuar and Othman, Nordin (2014) Computational analysis of the groove effect to reduce the cavitation in ball valves. Applied Mechanics and Materials, 629. pp. 414-419. ISSN 1660-9336; ESSN: 1662-7482

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2014) Effect of machining process on surface microhardness of titanium carbide reinforced aluminium LM6 composite. Applied Mechanics and Materials, 564. pp. 495-500. ISSN 1660-9336; ESSN: 1662-7482

Yahaya, Ridwan and Salit, Mohd Sapuan and Jawaid, Mohammad and Leman, Zulkiflle and Zainudin, Edi Syams (2014) Effect of post curing, fibre content and resin-hardener mixing ratio on the properties of kenaf-aramid hybrid composites. Applied Mechanics and Materials, 548-549. pp. 7-11. ISSN 1660-9336; ESSN: 1662-7482

Yidris, Noorfaizal and Hameed Sultan, Mohamed Thariq and Harmin, Mohammad Yazdi and Mohd Rafie, Azmin Shakrine (2014) Local-overall flexural interaction of pinned-ended thin-walled I-section columns. Applied Mechanics and Materials, 564. pp. 444-448. ISSN 1660-9336; ESSN: 1662-7482

Yahaya, Ridwan and Salit, Mohd Sapuan and Leman, Zulkiflle and Zainudin, Edi Syams (2014) Selection of natural fibre for hybrid laminated composites vehicle spall liners using analytical hierarchy process (AHP). Applied Mechanics and Materials, 564. pp. 400-405. ISSN 1660-9336; ESSN: 1662-7482

Yussof, Hanafiah and Zahari, Nur Ismarrubie and Makhtar, Ahmad Khushairy and Ohka, Masahiro and Basir, Siti Nora (2014) Tactile slippage analysis in optical three-axis tactile sensor for robotic hand. In: 4th Mechanical and Manufacturing Engineering, 17-18 Dec 2013, Bangi-Putrajaya, Malaysia. (pp. 1375-1379).

Yusof, N. S. B. and Mohd Rafie, Azmin Shakrine and Mohd Ariffin, Mohd. Khairol Anuar and Othman, Norzila (2014) Validation of flow impact to detect the energy loss in ball valve. Applied Mechanics and Materials, 564. pp. 281-286. ISSN 1660-9336; ESSN: 1662-7482

Yamchello, Hamed Tamjid and Samin, Razali and Tamjidyamcholo, Alireza and Bareji, Pooyan and Beheshti, Abolghasem Kourank (2014) A review of the critical success factors in the adoption of lean production system by small and medium sized enterprises. Applied Mechanics and Materials, 564. pp. 627-631. ISSN 1660-9336; ESSN: 1662-7482

Yusuf, Muhammad and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin (2012) Optimization of cutting parameters on turning process based on surface roughness using response surface methodology. Applied Mechanics and Materials, 117-119. pp. 1561-1565. ISSN 1660-9336; ESSN: 1662-7482

Zainul Abidin, Nur Sofuwani and Hussain, Siti Aslina and Mustapa Kamal, Siti Mazlina (2014) Removal of lactose from highly goat's milk concentration through ultrafiltration membrane. Applied Mechanics and Materials, 625. pp. 596-599. ISSN 1660-9336; ESSN: 1662-7482

Zakikhani, Parnia and Zahari, Rizal and Hameed Sultan, Mohamed Thariq (2014) Simulation of low velocity impact on composite hemispherical shell. Applied Mechanics and Materials, 564. pp. 406-411. ISSN 1660-9336; ESSN: 1662-7482

Zuber, Mohammad and Ahmad, Kamarul Arifin and Riazuddin, Vizy Nazira (2014) A review on the impact of aircraft cabin air quality and cabin pressure on human wellbeing. Applied Mechanics and Materials, 629. pp. 388-394. ISSN 1660-9336; ESSN: 1662-7482

Zamri, Ruzaidi and Ismail, Napsiah and Baharudin, B. T. Hang Tuah and Mohamed Ariff, Azmah Hanim and Prabuwono, Anton Satria (2013) Vision sensor application for intelligent polishing robotic cell. Applied Mechanics and Materials, 300-301. pp. 436-439. ISSN 1660-9336; ESSN: 1662-7482

Zahari, Rizal and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Mohd Rafie, Azmin Shakrine and Hameed Sultan, Mohamed Thariq (2012) Geometric non-linear analysis of composite laminated plates using higher order finite strip element. Applied Mechanics and Materials, 225. pp. 165-171. ISSN 1660-9336; ESSN: 1662-7482