Items where Division is "Institute of Advanced Technology" and Year is 2005

A. Saffian, Harmaen and Md Tahir, Paridah and Harun, Jalaluddin and Rani, Md. Ali and Ismail, Ismanizam and Lim, Victor K. Sim (2005) Fibre dimension and chemical constituens of rubber tree (Hevea brasiliensis) RRIM 2000 clone series. In: International Advanced Technology Congress: Conference on Bio-Engineering (CoBE2005), 6-8 Dec. 2005, Putrajaya, Malaysia. .

Abdan, Khalina (2005) Rheological Behaviour and Properties of Injection Moulded Oil Palm (Elaeis Gunineensis Jacq.) Empty Fruit Bunch Fibres/Polyproplene Composites). Doctoral thesis, Universiti Putra Malaysia.

Abdul Aziz, Nor Azah (2005) Modeling of Specific Absorption Rate Distribution in Human Head Due to Far Field Electromagnetic Wave Radiation of 900 Mhz And 1800 Mhz Using the Method of Moment. Masters thesis, Universiti Putra Malaysia.

Abdullah, Aslam and Zainuddin, Hishamuddin and Hassan, Zainul Abidin (2005) Extending Bianchi’s classification of homogeneous three-spaces. In: International Advanced Technology Congress: Conference on Advances in Theoretical Sciences, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Ahmad Bakery, Mohd. Sarizal and Wan Ismail, Wan Ishak and Ramli, Abdul Rahman and Mustafa, Mohd. Marzuki and Razali, Mohd. Hudzari (2005) Adaptive edge detection and image filtering using light sensor. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Al Zhour, Zeyad Abdel Al Ziz and Kilicman, Adem (2005) A family of geometric means of positive matrices and some new connections. In: International Advanced Technology Congress: Conference on Advances in Theoretical Sciences, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Al-Habashi, Ramadan Masoud and Yahya, Noorhana and Shafie, Mohd Shamsul Ezzad and Ismail, Ismayadi and Bawa Waje, Samaila and Mohd Saad, Mohd Hashim (2005) Preparation and characterization of aluminum substitute yttrium iron garnet nanoparticles by sol–gel technique. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6 - 8 Dec. 2005, Putrajaya, Malaysia. (pp. 577-583).

Al-Qdah, Majdi and Ramli, Abdul Rahman and Mahmud, Rozi (2005) A system of microcalcifications detection and evaluation of the radiologist: comparative study of the three main races in Malaysia. Computers in Biology and Medicine, 35 (10). pp. 905-914. ISSN 0010-4825

Al-Qdaha, Majdi and Ramli, Abdul Rahman and Mahmud, Rozi (2005) A system of microcalcifications detection and evaluation of the radiologist: comparative study of the three main races in Malaysia. Computers in Biology and Medicine, 35 (10). pp. 905-914. ISSN 0010-4825; ESSN: 1879-0534

Arianto, and Zen, F.P. and Gunara, B.E. and Zainuddin, Hishamuddin (2005) Effective n = 1 action from orbifold compactification. In: International Advanced Technology Congress: Conference on Advances in Theoretical Sciences, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Awal, Md. Awal and Wan Ishak, Wan Ismail and Endan, Johari and Harun, Mohd. Haniff (2005) Imaging approach for LAI determination of oil palm. In: International Conference on Advanced Material 2005: Conference on Bio-Engineering (CoBE 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. . (Unpublished)

Azizi, Amir and Ismail, Napsiah (2005) Investigating on the supply chain management. In: International Advanced Technology Congress: Conference on Spatial and Computational Engineering, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Bayat, Mehdi and Hamouda, Abdel Magid Salem and Mahdi , E. (2005) On the thermoelastic functionally graded material of ceramic-metal plate. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6 - 8 Dec. 2005, Putrajaya, Malaysia. (pp. 584-592).

Chui, Yew Leong and Ramli, Abdul Rahman and Perumal, Thinagaran and Sulaiman, Mohd Yusof and Ali, Mohd Liakot (2005) Design and implementation of multimedia digital matrix system. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Ch’ng, Han Siong and Zainuddin, Hishamuddin and Hassan, Zainul Abidin (2005) Accelerating cosmologies of R4×Rᵐ1×Rᵐ2×Hᵐ3 type. In: International Advanced Technology Congress: Conference on Advances in Theoretical Sciences, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Hamzah, Azizi and O. K. Rahmat, Rahmita Wirza and Sulaiman, Md. Nasir (2005) Discovering association rules for mining images datasets: a proposal. In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6-8 Dec. 2005, Putrajaya, Malaysia. (pp. 1-10).

Harun, Jalaluddin (2005) Fibre reinforced plastic component for interior automotive component. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Hassan, Jumiah and W. Yusoff, W. Mohamad Daud and Zainuddin, Hishamuddin and Abbas, Zulkifly and Grozescu, Ionel Valeriu and Khalid, Kaida (2005) Equivalent circuit modeling of ice exhibiting bound charge and quasi-dc behavior at –20⁰C to –60⁰C. In: International Advanced Technology Congress: Conference on Advances in Theoretical Sciences, 6 - 8 Dec. 2005, Putrajaya, Malaysia. .

Hussein, Mohd Zobir and Yahaya, Asmah and Lee, Phycilla Chi Ling and Chan, Woei Long (2005) Acetobacter xylenium as a shape-directing agent for the formation of nano-, micro-sized zinc oxide. Journal of Materials Science, 40 (23). pp. 6325-6328. ISSN 0022-2461

Hussein, Mohd Zobir and Zainal, Zulkarnain and Yahaya, Asmah and Sarijo, Siti Halimah (2005) The effect of zinc to aluminium ratio and concentration of the anion on the formation of zinc-aluminium-4-chlorophenoxy acetate nanocomposite. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. (pp. 302-312).

Hussein, Mohd Zobir and Yahaya, Asmah and Zainal, Zulkarnain and Jubri, Zaemah (2005) The effect of zinc to aluminium ratio on the properties of zinc-aluminium layered double hydroxide pamoate nanocomposite. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6 - 8 Dec. 2005, Putrajaya, Malaysia. (pp. 529-538).

Hussein, Mohd. Zobir and Lim, Sheau Wen and Yahaya, Asmah and Zainal, Zulkarnain (2005) Synthesis of organic-inorganic hybrid nanocomposite material: toluene-4-sulfonate in the lamella of zinc-aluminium-layered double hydroxide. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6 - 8 Dec. 2005, Putrajaya, Malaysia. (pp. 313-319).

Ismail, Napsiah and Abdul Rahman, Khairuddin and Md Yusof, Juraina and Mohd Kassim, Muhammad Saufi and Tang, Sai Hong and Samin, Razali (2005) Vision-based 3D part recognition system for flexible manufacturing cell. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Maiyas, Mohamed and Marghany, Maged and Mansor, Shattri and Khuzaimah, Zailani (2005) Extraction of surface wind and current patterns from sar imagery. In: International Advanced Technology Congress: Conference on Spatial and Computational Engineering, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Md Ariffin, Latifah and Kilicman, Adem and Zainuddin, Hishamuddin (2005) Analysis of results for test 1, test 2 and final exam MTH3004 for May 2003/2004. In: International Advanced Technology Congress: Conference on Advances in Theoretical Sciences, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Mohamed Addin, Addin Osman and Salit, Mohd Sapuan and Ebrahimi, Mahdi and Othman, Mohamed and Ismail, Napsiah (2005) Bayesian network approach to classify damages and f -folds feature subset selection method in laminated composite materials. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Mohd Kassim, Muhamad Saufi and Wan Ismail, Wan Ishak (2005) Enhanced graphical user interface (GUI) for autonomous agricultural vehicle. In: International Conference on Advanced Materials 2005: Conference on Bio-Engineering (CoBE 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. .

Mohd Saad, Mohd Hashim and Yahya, Noorhana and Shafie, Mohd Shamsul Ezzad and Ismail, Ismayadi and Bawa Waje, Samaila and Al-Habashi, Ramadan Masoud and Hashim, Mansor (2005) Preparation and characterisation of PVDF Sr₂.₅Yₒ.₅Fe₅O₁₂ particles composite. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6 - 8 Dec. 2005, Putrajaya, Malaysia. (pp. 557-562).

Musa, Mazlina (2005) Synthesis of Layered Double Hydroxidenanocomposites Using N-(2-Hydroxyethyl)-Ethylenediamine Triacetatic Acid and Anthraquinone-2-Sulphonic Acid as Guest Anions. Masters thesis, Universiti Putra Malaysia.

Musharavati, F. and Ismail, Napsiah and Hamouda, Abdel Magid Salem and Ramli, Abdul Rahman (2005) An analytical hierarchical process approach for evaluating configuration performance in reconfigurable manufacturing systems. In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6 - 8 Dec. 2005, Putrajaya, Malaysia. .

Musharavati, Farayi and Ismail, Napsiah and Hamouda, Abdel Magid Salem and Ramli, Abd. Rahman (2005) A neural network based control strategy for reconfigurable manufacturing systems. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Ramli, Abdul Rahman (2005) PARI-Z - underwater unmanned vehicle for maritime intelligent / surveillance. Research Report. The Research Management Centre, Universiti Putra Malaysia, Serdang, Selangor.

Razali, Mohd. Hudzari and Wan Ismail, Wan Ishak and Ismail, Napsiah and Sulaiman, Md. Nasir and Shariff, Rashid (2005) Videogrammetry technique for arm positioning of bio-production robot. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Roslee, Mardeni (2005) Development of a Path Loss Model for Wave Propagation Into Selected Buildings at Universiti Putra Malaysia. Masters thesis, Universiti Putra Malaysia.

Saaid, S. S. and Ismail, Napsiah and Wong, Shaw Voon and Sulaiman, Shamsuddin and Osman, Mohd. Rasid (2005) Pattern matching technique from B-rep model. In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Shariah, Mohammed Abu and Assilzadeh, Hamid and Mansor, Shattri (2005) Oil spill management using spatial technology. In: International Advanced Technology Congress: Conference on Spatial and Computational Engineering, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Sulaiman, M. Yusof and Alghoul, Mohammad and Abdul Wahab, Mahdi and Zakaria, Azmi (2005) Hybrid solar adsorption system for domestic hot water and continuous refrigeration. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Sulaiman, M. Yusof and Mohd. Kamil, Ithnaini and Ramli, Abd. Rahman (2005) Simulation of soft-switching converter topology for switched reluctance motor. In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Suyub, Iswan Budy and Hussein, Mohd Zobir and Mohd Yusoff, Khatijah (2005) Formation of high stability bio-inorganic materials: deoxyribonucleic acid (DNA) encapsulated in inorganic layered doubled hydroxide interlamella. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6 - 8 Dec. 2005, Putrajaya, Malaysia. (pp. 340-350).

Talebi, Hossein and Hamouda, Abdel Magid Salem (2005) Numerical modeling of ballistic impact and penetration: computational aspects and challenges. In: International Advanced Technology Congress: Conference on Spatial and Computational Engineering, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Toh, Sing Poh and Zainuddin, Hishamuddin (2005) Classical tautology versus quantum mechanical contradiction. In: International Advanced Technology Congress: Conference on Advances in Theoretical Sciences, 6-8 Dec. 2005, Putrajaya, Malaysia. .

Wan Ismail, Wan Ishak and Awal, Md Abdul and Endan, Johari and Harun, Mohd. Haniff (2005) Simulation programme for oil palm LAI and yield prediction. In: International Conference on Advanced Materials 2005: Conference on Bio-Engineering (CoBE 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. .

Yahaya, Asmah and Hussein, Mohd Zobir and Zainal, Zulkarnain and Mamat, Mazidah (2005) Synthesis and properties of zinc-aluminium-acetylsalicylate-nanocomposite. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. (pp. 331-339).

Yahaya, Asmah and Hussein, Mohd Zobir and Zainal, Zulkarnain and Mohamad Jaafar, Adila (2005) Syntheses and properties of 2,4- dichlorophenoxyacetate-layered double hydroxide-nanocomposites at different molar ratio of Mg-Al by co-precipitation method. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. (pp. 320-330).

Yahya, Noorhana and Beh, Hoe Guan and Lim, Kean Pah and Ismail, Ismayadi and Al-Habashi, Ramadan Masoud and Waji, Samalia Bawa and Shafie, Mohd Shamsul Ezzad and Mohd Saad, Mohd Hashim (2005) Formation of carbon nanotubes catalyzed by metal and bi-metal via pulsed laser depositon technique. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6-8 Dec. 2005, Putrajaya, Malaysia. (pp. 195-200).

Zen, Freddy Permana and Kosasih, Jusak Sali and Zainuddin, Hishamuddin and Wardayaa, A. Y. (2005) Tetrahedron diagram in Chern-Simons-witten theory. In: International Advanced Technology Congress: Conference on Advances in Theoretical Sciences, 6-8 Dec. 2005, Putrajaya, Malaysia. (pp. 1-5).