Items where Division is "Faculty of Engineering" and Year is 1997

Ahmad, Desa (1997) Rate of water absorption by soil clods under confined and unconfined conditions. Malaysian Journal of Soil Science, 1. pp. 65-76. ISSN 1394-7990

Ahmad, Desa and Jamaluddin, Hishamuddin and Gan, Lem Sing (1997) Peleraian Buah Sawit dari Tandan Menggunakan Kaedah Kimia. Pertanika Journal of Science & Technology, 5 (1). pp. 95-104. ISSN 0128-7680

Khor, Pho Lye and Md. Salleh, Yaacob (1997) Analysis of agricultural plough blades using finite element method. Agricultural Mechanization in Asia, Africa and Latin America, 28 (3). 29-32 & 36. ISSN 0084-5841

Megat Ahmed, M. M. H. and Gethin, David T. and Claypole, Tim Charles and Roylance, Brian J. (1997) A model for ink impression into a porous substrate. Journal of Physics D: Applied Physics, 30 (16). pp. 2276-2284. ISSN 0022-3727; ESSN: 1361-6463

Wan Ismail, Wan Ishak and Bardaie, Muhamad Zohadie and Othman, Zulkarnain (1997) Sistem Pengautomatan Jentera Pemungut Tandan Kelapa Sawit. Pertanika Journal of Science & Technology, 5 (2). pp. 241-256. ISSN 0128-7680

A. Ameen, Loukman (1997) Indoor Radio Propagation Measurements in Different Environments Using Two Types of Transmitting Antenna. Masters thesis, Universiti Putra Malaysia.

Abdel Malik, Mohamed A. H. (1997) Isothermal and Thermal Analyses of Elastohydrodynamic Lubrication of Hard Rolling Contact. Masters thesis, Universiti Putra Malaysia.

Abdelrahman, Ali Mohamed (1997) Integration Protocols for Voice and Data Traffic. Masters thesis, Universiti Putra Malaysia.

Abedin, Md. Shamsul (1997) Computer Aided Design and Analysis in Die/Mould of Casting Process. Masters thesis, Universiti Putra Malaysia.

Al-Mamun, Abdullah (1997) Anaerobic Fluidized Bed Treatment of Palm Oil Mill Effluent. Masters thesis, Universiti Putra Malaysia.

Aljack, Elsadig Abdalla (1997) Development of an Expert Database System for Environmental Impact Assessment (EDEIA). Masters thesis, Universiti Putra Malaysia.

Amran, Faizal Amri (1997) The Performance of a Disk Plow Combined with a Rotary Blade in Wet Clay Soil. PhD thesis, Universiti Putra Malaysia.

Ganfoud, Ahmed Abulaid (1997) Simulation and Control of Saltwater Intrusion Through Numerical and Physical Modeling Techniques. PhD thesis, Universiti Putra Malaysia.

Jelani, Abdul Razak (1997) Design and Development of an Oil Palm Fresh Fruit Bunch Cutting Device. Masters thesis, Universiti Putra Malaysia.

Khor, Ooi Hong (1997) Kinetic Study of an Aerobic Digestion With Biomass Retention by Ultrafiltration Membranes. Masters thesis, Universiti Putra Malaysia.

Ling, Tau Chuan (1997) Heavy Metals Biosorption by Powdered Rhizopus Oligosporus Biomass. Masters thesis, Universiti Putra Malaysia.

Mahdi Ahmad Saad, Elsadig (1997) Design and Fabricate Filament Winding Machine and Analysis of Cotton/Epoxy and Pandanus/Epoxy. Masters thesis, Universiti Putra Malaysia.

Mohamed Ahmed, Osman (1997) Analysis and Optimization of Incompressible Inviscid Flow around Split Flap Airfoils. Masters thesis, Universiti Putra Malaysia.

Ng, Yu Ting (1997) An Expert System for Trouble Shooting - Auto Wire Bonder Machine. Masters thesis, Universiti Putra Malaysia.

Omer, Abdu Idris (1997) Development of Pc-Based Multi-Channel Measurement Unit. Masters thesis, Universiti Putra Malaysia.

Salleh, Hanim (1997) The Effects of Cooling Delay on the Cooling Response and the Physico-Chemical Properties of Eksotika Papaya. Masters thesis, Universiti Putra Malaysia.

Sns Bukhari, Mohabattul Zaman (1997) The Development of a No-Clean Solder for Radio Frequency Power Module. Masters thesis, Universiti Putra Malaysia.

Tan, Hui Mieng (1997) A Survey on Total Quality Management Implementation in Malaysian Manufacturing Companies. Masters thesis, Universiti Putra Malaysia.