Items where Division is "Faculty of Engineering" and Year is 1997

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Author | Item Type | No Grouping
Jump to: A | G | J | K | L | M | N | O | S | T | W
Number of items: 20.

A

A. Ameen, Loukman (1997) Indoor Radio Propagation Measurements in Different Environments Using Two Types of Transmitting Antenna. Masters thesis, Universiti Putra Malaysia.

Abdel Malik, Mohamed A. H. (1997) Isothermal and Thermal Analyses of Elastohydrodynamic Lubrication of Hard Rolling Contact. Masters thesis, Universiti Putra Malaysia.

Abdelrahman, Ali Mohamed (1997) Integration Protocols for Voice and Data Traffic. Masters thesis, Universiti Putra Malaysia.

Abedin, Md. Shamsul (1997) Computer Aided Design and Analysis in Die/Mould of Casting Process. Masters thesis, Universiti Putra Malaysia.

Ahmad, Desa and Jamaluddin, Hishamuddin and Gan, Lem Sing (1997) Peleraian Buah Sawit dari Tandan Menggunakan Kaedah Kimia. Pertanika Journal of Science & Technology, 5 (1). pp. 95-104. ISSN 0128-7680

Al-Mamun, Abdullah (1997) Anaerobic Fluidized Bed Treatment of Palm Oil Mill Effluent. Masters thesis, Universiti Putra Malaysia.

Aljack, Elsadig Abdalla (1997) Development of an Expert Database System for Environmental Impact Assessment (EDEIA). Masters thesis, Universiti Putra Malaysia.

Amran, Faizal Amri (1997) The Performance of a Disk Plow Combined with a Rotary Blade in Wet Clay Soil. PhD thesis, Universiti Putra Malaysia.

G

Ganfoud, Ahmed Abulaid (1997) Simulation and Control of Saltwater Intrusion Through Numerical and Physical Modeling Techniques. PhD thesis, Universiti Putra Malaysia.

J

Jelani, Abdul Razak (1997) Design and Development of an Oil Palm Fresh Fruit Bunch Cutting Device. Masters thesis, Universiti Putra Malaysia.

K

Khor, Ooi Hong (1997) Kinetic Study of an Aerobic Digestion With Biomass Retention by Ultrafiltration Membranes. Masters thesis, Universiti Putra Malaysia.

L

Ling, Tau Chuan (1997) Heavy Metals Biosorption by Powdered Rhizopus Oligosporus Biomass. Masters thesis, Universiti Putra Malaysia.

M

Mahdi Ahmad Saad, Elsadig (1997) Design and Fabricate Filament Winding Machine and Analysis of Cotton/Epoxy and Pandanus/Epoxy. Masters thesis, Universiti Putra Malaysia.

Mohamed Ahmed, Osman (1997) Analysis and Optimization of Incompressible Inviscid Flow around Split Flap Airfoils. Masters thesis, Universiti Putra Malaysia.

N

Ng, Yu Ting (1997) An Expert System for Trouble Shooting - Auto Wire Bonder Machine. Masters thesis, Universiti Putra Malaysia.

O

Omer, Abdu Idris (1997) Development of Pc-Based Multi-Channel Measurement Unit. Masters thesis, Universiti Putra Malaysia.

S

Salleh, Hanim (1997) The Effects of Cooling Delay on the Cooling Response and the Physico-Chemical Properties of Eksotika Papaya. Masters thesis, Universiti Putra Malaysia.

Sns Bukhari, Mohabattul Zaman (1997) The Development of a No-Clean Solder for Radio Frequency Power Module. Masters thesis, Universiti Putra Malaysia.

T

Tan, Hui Mieng (1997) A Survey on Total Quality Management Implementation in Malaysian Manufacturing Companies. Masters thesis, Universiti Putra Malaysia.

W

Wan Ismail, Wan Ishak and Bardaie, Muhamad Zohadie and Othman, Zulkarnain (1997) Sistem Pengautomatan Jentera Pemungut Tandan Kelapa Sawit. Pertanika Journal of Science & Technology, 5 (2). pp. 241-256. ISSN 0128-7680

This list was generated on Mon Dec 22 03:54:53 2014 MYT.

Universiti Putra Malaysia Institutional Repository

Universiti Putra Malaysia Institutional Repository is an on-line digital archive that serves as a central collection and storage of scientific information and research at the Universiti Putra Malaysia.

Currently, the collections deposited in the IR consists of Master and PhD theses, Master and PhD Project Report, Journal Articles, Journal Bulletins, Conference Papers, UPM News, Newspaper Cuttings, Patents and Inaugural Lectures.

As the policy of the university does not permit users to view thesis in full text, access is only given to the first 24 pages only.