Items where Author is "Zahari, Rizal"
![]() | Up a level |
Group by: Item Type | No Grouping
Number of items: 50.
Randjbaran, Elias and Majid, Dayang L. and Zahari, Rizal and Hameed Sultan, Mohamed Thariq and Mazlan, Norkhairunnisa
(2020)
Effects volume of carbon nanotubes on the angled ballistic impact for Carbon Kevlar Hybrid fabrics.
Facta Universitatis, Series: Mechanical Engineering, 18 (2).
229 - 244.
ISSN 0354-02025; ESSN: 2335-0164
Hashim, Nurain and Abang Abdul Majid, Dayang Laila and Mahdi, El-Sadig and Zahari, Rizal and Yidrisa, Noorfaizal
(2019)
Effect of fiber loading directions on the low cycle fatigue of intraply carbon- Kevlar reinforced epoxy hybrid composites.
Composite Structures, 212.
pp. 476-483.
ISSN 0263-8223; ESSN: 1879-1085
Al Asemi, Hammad and Aftab, Syed Mohammed Aminuddin and Zahari, Rizal and Abdul Aziz, Faieza and Ahmad, Kamarul Arifin
(2019)
Application of computational fluid dynamics in piping distribution system and special focus on the Arabian peninsula: a review.
International Review of Mechanical Engineering, 13 (1).
ISSN 1970-8734
Mutafi, Ayad and Yidris, Noorfaizal and Loughlan, Joseph and Zahari, Rizal and Ishak, Mohamad Ridzwan
(2019)
Investigation into the distribution of residual stresses in pressed-braked thin-walled steel lipped channel sections using the 3D-FEM technique.
Thin-Walled Structures, 135 (2).
pp. 437-445.
ISSN 0263-8231
Halimoon, Normala and Ahmad, Mohd Farid and Ling, Sui Kiong and Zahari, Rizal
(2018)
Antifungal compound isolated from Catharanthus roseus L. (pink) for bological control of root rot rubber diseases.
International Journal of Analytical Chemistry.
art. no. 8150610.
pp. 1-7.
ISSN 1687-8760; ESSN: 1687-8779
Hashim, Nurain and Majid, Dayang Laila Abdul and Zahari, Rizal and Yidris, Noorfaizal
(2017)
Tensile properties of woven carbon/kevlar reinforced epoxy hybrid composite.
Materials Science Forum, 890.
20 - 23.
ISSN 0255-5476; ESSN: 1662-9752
Mutafi, Ayad and Yidris, Noorfaizal and Ishak, Mohamad Ridzwan and Zahari, Rizal
(2017)
3D FEM to predict residual stresses of press-braked thin-walled steel sections.
In: Global Civil Engineering Conference (GCEC 2017), 25-28 July 2017, Kuala Lumpur, Malaysia. (pp. 215-224).
Abdul Rani, Rohazrin and Mohd Rafie, Azmin Shakrine and Zahari, Rizal and Ahmad, Mohamed Tarmizi
(2015)
Effects of different cross-section shapes on bending and weight of harvesting pole by using finite element analysis.
Journal of Tropical Agriculture and Food Science, 43 (2).
pp. 191-201.
ISSN 1394-9829; ESSN: 2289-9650
Zakikhani, Parnia and Zahari, Rizal and Sultan, Mohamed T. H. and Majid, Dayang L.
(2015)
Thermal degradation of four bamboo species.
Bioresources, 11 (1).
pp. 414-425.
ISSN 1930-2126
Zakikhani, Parnia and Zahari, Rizal and Hameed Sultan, Mohamed Thariq and Abang Abdul Majid, Dayang Laila
(2014)
Extraction and preparation of bamboo fibre-reinforced composites.
Materials and Design, 63.
pp. 820-828.
ISSN 0264-1275; ESSN: 1873-4197
Rahmanian, Saeed and Abdul Rashid, Suraya and Shazed, M. A. and Zahari, Rizal and Zainudin, Edi Syams
(2014)
Mechanical characterization of epoxy composite with multiscale reinforcements: carbon nanotubes and short carbon fibers.
Materials and Design, 60.
pp. 34-40.
ISSN 0264-1275; ESSN: 1873-4197
Hassan, Mohamed P. and Mahmud, Abdullah Saad and Mohd Rafie, Azmin Shakrine and Zahari, Rizal
(2014)
Alternative numerical validation methodology for short-term development projects.
Applied Mechanics and Materials, 564.
pp. 638-643.
ISSN 1660-9336; ESSN: 1662-7482
Lim, Keng Teek and Zahari, Rizal and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq
(2014)
Experimental assessment of collapse behavior and energy absorption of composite and hybrid composite square tube subjected to oblique loads.
The International Journal of Engineering and Science, 3 (3).
pp. 13-29.
ISSN 2319–1805; ESSN: 2319–1813
Hameed Sultan, Mohamed Thariq and Basri, Shah Nor and Mohd Rafie, Azmin Shakrine and Yidris, Noorfaizal and Mustapha, Faizal and Zahari, Rizal and Mohd Ajir, Mohd Ramly
(2014)
Impact damage analysis for glass reinforced epoxy laminated plates using single stage gas gun.
Applied Mechanics and Materials, 564.
pp. 382-387.
ISSN 1660-9336; ESSN: 1662-7482
Zakikhani, Parnia and Zahari, Rizal and Hameed Sultan, Mohamed Thariq
(2014)
Simulation of low velocity impact on composite hemispherical shell.
Applied Mechanics and Materials, 564.
pp. 406-411.
ISSN 1660-9336; ESSN: 1662-7482
Hameed Sultan, Mohamed Thariq and Mohd Rafie, Azmin Shakrine and Yidris, Noorfaizal and Mustapha, Faizal and Zahari, Rizal
(2013)
Damage classification in CFRP laminates using the NDT/E approach.
NDT Spectra (7).
pp. 217-224.
ISSN 2231-9891
A.Rasid, Zainudin and Zahari, Rizal and Ayob, Amran
(2013)
The post-buckling behavior of the composite plates with embedded shape memory alloy subjected to combined loading using finite element method.
International Review of Mechanical Engineering, 7 (6).
pp. 1121-1127.
ISSN 1970-8734
Ramadhan, A. A. and Abu Talib, Abd. Rahim and Mohd Rafie, Azmin Shakrine and Zahari, Rizal
(2013)
High velocity impact response of Kevlar-29/epoxy and 6061-T6 aluminum laminated panels.
Materials & Design, 43.
pp. 307-321.
ISSN 0261-3069
Abu Talib, Abd. Rahim and Ramadhan, A. A. and Mohd Rafie, Azmin Shakrine and Zahari, Rizal
(2013)
Influence of cut-out hole on multi-layer Kevlar-29/epoxy composite laminated plates.
Materials & Design, 43.
pp. 89-98.
ISSN 0261-3069
Rahmanian, Saeed and Abdul Rashid, Suraya and Zahari, Rizal and Zainudin, Edi Syams
(2013)
Synthesis of vertically aligned carbon nanotubes on carbon fiber.
Applied Surface Science, 271.
pp. 424-428.
ISSN 0169-4332; ESSN: 1873-5584
Randjbaran, Elias and Zahari, Rizal and Majid, Dayang Laila and Abdul Jalil, Nawal Aswan and Vaghei, Ramin and Ahmadi, Ramin
(2013)
The effects of stacking sequence layers of hybrid composite materials in energy absorption under the high velocity ballistic impact conditions: an experimental investigation.
Journal of Material Sciences & Engineering, 2 (4).
pp. 1-8.
ISSN 2169-0022
Djojodihardjo, Harijono and Jamali, Hamed and Shokrani, Alireza and Mustapha, Faizal and Zahari, Rizal and Wiriadidjaja, Surjatin
(2012)
Computational simulation for static and dynamic load of rectangular plate in elastic region for analysis of impact resilient structure.
In: AEROTECH-IV 2012-Recent Advances in Aerospace Technology, 21-22 Nov. 2012, Kuala Lumpur, Malaysia. (pp. 150-157).
Abu Talib, Abd. Rahim and Zahari, Rizal and Mohd Rafie, Azmin Shakrine
(2012)
Experimental and numerical simulation of energy absorption on composite Kevlar29/Polyester under high velocity impact.
Journal of Advanced Science and Engineering Research, 2 (2012).
pp. 52-67.
ISSN 2231-8844
Zahari, Rizal and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Mohd Rafie, Azmin Shakrine and Hameed Sultan, Mohamed Thariq
(2012)
Geometric non-linear analysis of composite laminated plates using higher order finite strip element.
Applied Mechanics and Materials, 225.
pp. 165-171.
ISSN 1660-9336; ESSN: 1662-7482
Zahari, Rizal and Kamarulazizi, Sulaiman and Abang Abdul Majid, Dayang Laila
(2012)
Tensile behaviour of unbalanced woven C-glass/epoxy composite laminated plate with and without circular cutouts.
Jurnal Mekanikal, 34.
pp. 57-65.
ISSN 2289-3866; ESSN: 2289-3873
Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal
(2011)
Modeling of residual stress relaxation of fatigue in 2024-T351 aluminium alloy.
International Journal of Fatigue, 33 (2).
pp. 279-285.
ISSN 0142-1123
Varatharajoo, Renuganth and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Zahari, Rizal and Kahle, Ralph
(2011)
Critical speeds for carbon/epoxy composite rotors in spacecraft energy storage applications.
Key Engineering Materials, 471-472.
pp. 37-42.
ISSN 1013-9826; ESSN: 1662-9795
Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal
(2011)
Micro-hardness and residual stress relaxation of 2024 T351 aluminum alloy.
Key Engineering Materials, 462-463.
pp. 343-348.
ISSN 1013-9826; ESSN: 1662-9795
Shahrjerdi, Ali and Mustapha, Faizal and Bayat, Mehdi and Salit, Mohd Sapuan and Zahari, Rizal and M. M., Shahzamanian
(2011)
Natural frequency of F.G. rectangular plate by shear deformation theory.
IOP Conference Series: Materials Science and Engineering, 17 (1).
art. no. 012008.
pp. 1-6.
ISSN 1757-8981; ESSN: 1757-899X
Shahrjerdi, Ali and Mustapha, Faizal and Salit, Mohd Sapuan and Bayat, Mehdi and Abang Abdul Majid, Dayang Laila and Zahari, Rizal
(2011)
Optimal sintering procedure to fabrication of functionally graded Hydroxyapatite-Titanium.
Key Engineering Materials, 471-472.
pp. 140-144.
ISSN 1013-9826; ESSN: 1662-9795
Ng, Wei Sim and Mustapha, Faizal and Varatharajoo, Renuganth and Zahari, Rizal and Abang Abdul Majid, Dayang Laila
(2011)
Parametric study on cohesive element for composite fuselage model.
Key Engineering Materials, 471-472.
pp. 1085-1090.
ISSN 1013-9826; ESSN: 1662-9795
Haris, Mohd Yusoff and Abang Abdul Majid, Dayang Laila and Zainudin, Edi Syams and Mustapha, Faizal and Zahari, Rizal and Halim, Zahurin
(2011)
Preliminary review of biocomposites materials for aircraft radome application.
Key Engineering Materials, 471-472.
pp. 563-567.
ISSN 1013-9826; ESSN: 1662-9795
Zahari, Rizal and Abang Abdul Majid, Dayang Laila and Mustapha, Faizal and Varatharajoo, Renuganth and A. Rasid, Zainudin and Ayob, Amran
(2011)
Thermal buckling and post-buckling improvements of laminated composite plates using finite element method.
Key Engineering Materials, 471-47 (5).
pp. 536-541.
ISSN 1013-9826
Shahrjerdi, Ali and Mustapha, Faizal and Salit, Mohd Sapuan and Bayat, Mehdi and Abang Abdul Majid, Dayang Laila and Zahari, Rizal
(2011)
Thermal free vibration analysis of temperature-dependent functionally graded plates using second order shear deformation.
Key Engineering Materials, 471-472.
pp. 133-139.
ISSN 1013-9826; ESSN: 1662-9795
A. Rasid, Zainudin and Zahari, Rizal and Ayob, Amran and Abang Abdul Majid, Dayang Laila and Mohd Rafie, Azmin Shakrine
(2011)
Thermal post-buckling improvements of laminated composite plates using the active strain energy tuning approach.
Advanced Materials Research, 311-313.
pp. 2235-2238.
ISSN 1022-6680; ESSN: 1662-8985
A. Rasid, Zainudin and Zahari, Rizal
(2011)
The post-buckling improvement of the shape memory alloy composite plates through the active strain energy tuning using finite element method.
In: 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2011), 25-28 Sept. 2011, Bayview Hotel, Langkawi, Kedah. (pp. 564-569).
Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal
(2010)
Residual stress relaxation and surface hardness of a 2024-t351 aluminium alloy.
Materials Testing, 52 (9).
pp. 632-639.
ISSN 0025-5300
Yidris, Noorfaizal and Zahari, Rizal and Abang Abdul Majid, Dayang Laila and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Mohd Rafie, Azmin Shakrine
(2010)
Crush simulation of woven c-glass/epoxy unmanned ariel vehicle fuselage section.
International Journal of Mechanical and Materials Engineering, 5 (2).
pp. 260-267.
ISSN 1823-0334
Shahrjerdi, Ali and Bayat, Mehdi and Mustapha, Faizal and Salit, Mohd Sapuan and Zahari, Rizal
(2010)
Free vibration analysis of functionally graded quadrangle plates using second order shear deformation theory.
Australian Journal of Basic and Applied Sciences, 4 (5).
pp. 893-905.
ISSN 1991-8178
Aljibori, Hakim S. Sultan and Chong, W. P. and Mahlia, Teuku Meurah Indra and Chong, Wen Tong and Edi, Prasetyo and Al-Qrimli, Haidar and Anjum, Irfan and Zahari, Rizal
(2010)
Load-displacement behavior of glass fiber/epoxy composite plates with circular cut-outs subjected to compressive load.
Materials & Design, 31 (1).
pp. 466-474.
ISSN 0261-3069
Taher, Siavash T. and Oshkour, Azim Ataollahi and Zahari, Rizal and Mustapha, Faizal and Basri, Shahnor
(2010)
On the Crush Behavior of an Ultra Light Multi-Cell Foam-Filled Composite Structure under Axial Compression.
Journal of Reinforced Plastics and Composites, 29 (3).
ISSN 0731-6844
Shahrjerdi, Ali and Bayat, Mehdi and Mustapha, Faizal and Salit, Mohd Sapuan and Zahari, Rizal
(2010)
Stress analysis a functionally graded quadrangle plate using second order shear deformation theory.
International Review of Mechanical Engineering, 4 (1).
pp. 92-105.
ISSN 1970-8734
Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal
(2009)
Relaxation of compressive residual stress. Part 1: relaxation of stage I.
Journal of Scientific and Industrial Research, 68 (12).
pp. 1035-1037.
ISSN 0022-4456; ESSN: 0975-1084
Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal
(2009)
Modelling of residual stress relaxation : a review.
Pertanika Journal of Science & Technology, 17 (2).
pp. 325-336.
ISSN 0128-7680; ESSN: 2231-8526
Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal
(2009)
Modelling of residual stress relaxation: a review.
Pertanika Journal of Science & Technology, 17 (2).
pp. 211-218.
ISSN 0128-7680; ESSN: 2231-8526
Taher, Siavash T. and Zahari, Rizal and Ataollahi, Simin and Mustapha, Faizal and Basri, Shahnor
(2009)
A double-cell foam-filled composite block for efficient energy absorption under axial compression.
Composite Structures, 89 (3).
pp. 399-407.
ISSN 0263-8223
Zahari, Rizal and El-Zafrany, Ali M.
(2009)
Progressive failure analysis of composite laminated stiffened plates using the finite strip method.
Composite Structures, 87 (1).
pp. 63-70.
ISSN 0263-8223; ESSN: 1879-1085
Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal
(2009)
Relaxation of residual stress part 2: relaxation of stage 2.
American Journal of Engineering and Applied Sciences, 2 (4).
pp. 759-763.
ISSN 1941-7020; ESSN: 1941-7039
Zahari, Rizal and Azmee, Abdul Hannan and Mustapha, Faizal and Salit, Mohd Sapuan and Varatharajoo, Renuganth and Shakrine, Azmine
(2008)
Prediction of progressive failure in woven glass/epoxy composite laminated panels.
Jurnal Mekanikal, 25.
pp. 80-91.
ISSN 2289-3866; ESSN: 2289-3873
Zahari, Rizal and El Zafrany, Ahmed
(2006)
Progressive damage analysis of composite layered plates using a mesh reduction method.
In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 117-134).