UPM Institutional Repository

Items where Author is "Megat Ahmad, Megat Mohamad Hamdan "

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 69.

Article

Tan, Kean Sheng and Wong, Shaw Voon and Megat Ahmad, Megat Mohamad Hamdan (2016) Computational simulation of frontal impact of motorcycle telescopic fork. International Journal of Crashworthiness, 21 (2). pp. 161-172. ISSN 1358-8265; ESSN: 1754-2111

Mohamed, Al Mabruk S. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Hamouda, Abdel Magid Salem and Baharudin, B. T. Hang Tuah (2012) Modeling the technology transfer process in the petroleum industry: evidence from Libya. Mathematical and Computer Modelling, 55 (3-4). pp. 451-570. ISSN 0895-7177; ESSN: 1872-9479

Agung, Efriyo Hadi and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Mohd Dahlan, Khairul Zaman and Mustofa, Usman (2012) Effects of composition parameters on tensile and thermal properties of abaca fibre reinforced high impact polystyrene composites. Pertanika Journal of Science & Technology, 20 (2). pp. 415-423. ISSN 0128-7680; ESSN: 2231-8526

Safikhani, Hassan and Tengku Kamalden, Tengku Fadilah and Amri, Saidon and Megat Ahmad, Megat Mohamad Hamdan (2011) Ground reaction force during walking with and without counterbalance load system. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 2704-2708. ISSN 1991-8178

Hadi, Agung Efriyo and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Mohd Dahlan, Khairul Zaman and Usman, Mustofa (2011) Optimization of the mechanical properties of abaca fibre-reinforced high impact polystyrene (HIPS) composites using Box-Behnken design of experiments. Polymers and Polymer Composites, 19 (8). pp. 697-710. ISSN 0967-3911; ESSN: 1478-2391

Hadi, Agung Efriyo and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Mohd Dahlan, Khairul Zaman and Usman, Mustofa (2011) Physical properties of abaca (Musa textilis nee) fibre reinforced high impact polystyrene (HIPS) composites. Pertanika Journal of Science & Technology, 19 (2). pp. 349-363. ISSN 0128-7680; ESSN: 2231-8526

Salit, Mohd Sapuan and Sahari, Barkawi and Abdalla, F. Hamed and Megat Ahmad, Megat Mohamad Hamdan (2011) Stress-strain distributions through the thickness of thick walled filament wound polymer composite tube under internal pressure loading. Journal of Polymer Materials, 28 (3). pp. 475-504. ISSN 0973-8622

Hadi, Agung Efriyo and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Mohd Dahlan, Khairul Zaman and Usman, Mustofa (2011) Study on abaca (Musa textilis Nee) fibre reinforced high impact polystyrene (HIPS) composites by thermogravimetric analysis (TGA). International Journal of Physical Sciences, 6 (8). art. no. A56834F25968. pp. 2100-2106. ISSN 1992-1950

Rashdi, Abdalla A. Ab. and Salit, Mohd Sapuan and Abdan, Khalina and Megat Ahmad, Megat Mohamad Hamdan (2010) Water absorption behaviour of kenaf reinforced unsaturated polyester composites and its influence on their mechanical properties. Pertanika Journal of Science & Technology, 18 (2). pp. 433-440. ISSN 0128-7680; ESSN: 2231-8526

Mohamed, Al Mabruk S. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Hamouda, Abdel Magid Salem and Baharudin, B. T. Hang Tuah (2010) Modeling technology transfer for petroleum industry in Libya: an overview. Scientific Research and Essays, 5 (2). art. no. 78C57A216546. pp. 130-147. ISSN 1992-2248

Ab. Rashdi, Abdalla A. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Abdan, Khalina (2010) Combined effects of water absorption due to water immersion, soil buried and natural weather on mechanical properties of kenaf fibre unsaturated polyester composites (KFUPC). International Journal of Mechanical and Materials Engineering, 5 (1). pp. 11-17. ISSN 1823-0334

Saberi, Sara and Mohd Yusuff, Rosnah and Zulkifli, Norzima and Megat Ahmad, Megat Mohamad Hamdan (2010) Effective factors on advanced manufacturing technology implementation performance: a review. Journal of Applied Sciences, 10 (13). pp. 1229-1242. ISSN 1812-5654; ESSN: 1812-5662

Bachtiar, Dandi and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan (2010) Flexural properties of alkaline treated sugar palm fibre reinforced epoxy composites. International Journal of Automotive and Mechanical Engineering, 1. pp. 79-90. ISSN 2229-8649; ESSN: 2180-1606

A. Perumal, Puvanasvaran and Megat Ahmad, Megat Mohamad Hamdan and Tang, Sai Hong and Muhamad, Mohd Razali and Hamouda, Abdel Magid Salem (2010) Lean process management implementation through enhanced problem solving capabilities. Journal of Industrial Engineering and Management, 3 (3). pp. 447-493. ISSN 2013-8423; ESSN: 2013-0953

Ab. Rashdi, Abdalla A. and Salit, Mohd Sapuan and Abdan, Khalina and Megat Ahmad, Megat Mohamad Hamdan (2010) The effects of weathering on mechanical properties of kenaf unsaturated polyester composites (KFUPC). Polymers and Polymer Composites, 18 (6). pp. 337-343. ISSN 0967-3911; ESSN: 1478-2391

A. Perumal, Puvanasvaran and Megat Ahmad, Megat Mohamad Hamdan and Tang, Sai Hong and Muhamad, Mohd Razali and Hamouda, Abdel Magid Salem (2009) Lean behavior in implementing lean process management. Journal of Applied Sciences Research, 5 (8). pp. 930-943. ISSN 1816-157X

A. Perumal, Puvanasvaran and Tay, C. H. and Megat Ahmad, Megat Mohamad Hamdan and Tang, Sai Hong and Mohd Yusuff, Rosnah and Muhamad, Mohd Razali and Hamouda, Abdel Magid Salem (2009) Leanness achievement through people development system in implementing lean process management. American Journal of Engineering and Applied Sciences, 2 (1). pp. 105-119. ISSN 1941-7020; ESSN: 1941-7039

Ab. Rashdi, Abdalla A. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Abdan, Khalina (2009) Review of kenaf fiber reinforced polymer composites. Polimery, 54 (11-12). pp. 777-780. ISSN 0032-2725

Hamed, Abdalla F. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Sahari, Barkawi (2009) Theoretical stress and strain distribution across thick - walled filament wound composite. Polimery, 54 (7-8). pp. 559-563. ISSN 0032-2725

Ab. Rashdi, Abdalla A. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Abdan, Khalina (2009) Water absorption and tensile properties of soil buried kenaf fibre reinforced unsaturated polyester composites (KFRUPC). Journal of Food, Agriculture and Environment, 7 (3-4 ). pp. 908-911. ISSN 1459-0255

Mohamed, Al Mabruk S. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Hamouda, Abdel Magid Salem and Baharudin, B. T. Hang Tuah (2009) The effect of technology transfer factors on performance: an empirical study of Libyan petroleum industry. American Journal of Applied Sciences, 6 (9). pp. 1763-1769. ISSN 1546-9239; ESSN: 1554-3641

A. Perumal, Puvanasvaran and Megat Ahmad, Megat Mohamad Hamdan and Tang, Sai Hong and Muhamad, Mohd Razali (2009) The roles of communication process for an effective lean manufacturing implementation. Journal of Industrial Engineering and Management, 2 (1). pp. 128-152. ISSN 2013-8423; ESSN: 2013-0953

Abdalla, F. Hamed and Megat Ahmad, Megat Mohamad Hamdan and Salit, Mohd Sapuan and Sahari, Barkawi (2008) Determination of volume fraction values of filament wound glass and carbon fiber reinforced composites. Journal of Engineering and Applied Sciences, 3 (4). pp. 7-11. ISSN 1819-6608

Matoorian, Pouria and Sulaiman, Shamsuddin and Megat Ahmad, Megat Mohamad Hamdan (2008) An experimental study for optimization of electrical discharge turning (EDT) process. Journal of Materials Processing Technology, 204 (1-3). pp. 350-356. ISSN 0924-0136

Mohamed, Harimi and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Abas, Fuad (2008) Numerical study of heat loss from boiler using different ratios of fibre-to-shell from palm oil wastes. Journal of Scientific and Industrial Research, 67 (6). pp. 440-444. ISSN 0022-4456; ESSN: 0975-1084

A. Perumal, Puvanasvaran and Tan, B. H. and Megat Ahmad, Megat Mohamad Hamdan and Tang, Sai Hong and Muhamad, Mohd Razali and Hamouda, Abdel Magid Salem (2008) Degree of leanness and managerial commitment in an aerospace company. Journal of Statistics & Management System, 11 (4). pp. 653-673. ISSN 0972-0510; ESSN: 2169-0014

Bidhandi, Hadi Mohammadi and Mohd. Yusuff, Rosnah and Megat Ahmad, Megat Mohamad Hamdan and Abu Bakar, Mohd Rizam (2008) Development of a new approach for deterministic supply chain network design. European Journal of Operational Research, 198 (1). pp. 121-128. ISSN 0377-2217

Leman, Zulkiflle and Salit, Mohd Sapuan and Mohamed Zawawi, Mohamed Azwan and Megat Ahmad, Megat Mohamad Hamdan and Maleque, Md Abdul (2008) The Effect of Environmental Treatments on Fiber Surface Properties and Tensile Strength of Sugar Palm Fiber Reinforced Epoxy Composites. Polymer-Plastics Technology and Engineering, 47 (6). 606- 612. ISSN 0360-2559

Hamed, Abdalla F. and Megat Ahmad, Megat Mohamad Hamdan and Sahari, Barkawi and Salit, Mohd Sapuan (2008) Experimental characterization of filament wound glass/epoxy and carbon/epoxy composite materials. ARPN Journal of Engineering and Applied Sciences, 3 (4). pp. 76-87. ISSN 1819-6608

Hamed, Abdalla F. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Sahari, Barkawi (2008) Internal pressure carrying capacity for different loading modes of filament-wound pipes from glass fiber-reinforced epoxy composites. Polymer-Plastics Technology and Engineering, 47 (8). pp. 802-808. ISSN 0360-2559; ESSN: 1525-6111

Leman, Zulkiflle and Salit, Mohd Sapuan and Aaisa, Mohamad Saifol and Md Abdul Maleque, and Megat Ahmad, Megat Mohamad Hamdan (2008) Moisture absorption bahaviour of sugar palm fibre reinforced epoxy composites. Materials and Design, 29 (8). pp. 1666-1670. ISSN 0261-3069; ESSN: 1873-4197

Hamed, Abdalla F. and Megat Ahmad, Megat Mohamad Hamdan and Salit, Mohd Sapuan and Sahari, Barkawi (2008) Theoretical analysis for calculation of the through thickness effective constants for orthotropic thick filament wound tubes. Polymer-Plastics Technology and Engineering, 47 (10). pp. 1008-1015. ISSN 0360-2559; ESSN: 1525-6111

Bachtiar, Dandi and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan (2008) The effect of alkaline treatment on tensile properties of sugar palm fibre reinforced epoxy composites. Materials and Design, 29 (7). pp. 1285-1290. ISSN 0264-1275; ESSN: 1873-4197

A. Perumal, Puvanasvaran and Muhamad, Mohd Razali and Megat Ahmad, Megat Mohamad Hamdan and Tang, Sai Hong and Hamouda, Abdel Magid Salem (2008) A review of problem solving capabilities in lean process management. American Journal of Applied Sciences, 5 (5). pp. 504-511. ISSN 1546-9239; ESSN: 1554-3641

Hamouda, Abdel Magid Salem and Sulaiman, Shamsuddin and Vijayaram, Thoguluva Raghavan and Sayuti, M. and Megat Ahmad, Megat Mohamad Hamdan (2007) Processing and characterisation of particulate reinforced aluminium silicon matrix composite. Journal of Achievements in Materials and Manufacturing Engineering, 25 (2). pp. 11-16. ISSN 1734-8412

Abo-Alhol, Tariq R. A. and Ismail, Md. Yusof and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan (2006) Effects of quality circle participation on employee perception and attitude in five Malaysian companies. Journal of Scientific and Industrial Research, 65 (12). pp. 970-976. ISSN 0022-4456; ESSN: 0975-1084

Abbas, Kassim Ali and Megat Ahmad, Megat Mohamad Hamdan and Salit, Mohd Sapuan and Wan, M. A. and Bakar, Jamilah and I., Dincer (2006) Numerical analysis of heat transfer in cooling of fish packages. International Communications in Heat and Mass Transfer, 33 (7). pp. 889-897. ISSN 0735-1933

Syed Shaharuddin, Sharifah Imihezri and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Megat Ahmad, Megat Mohamad Hamdan and Zainuddin, Edi Syams and Osman, Mohd Rasid and Abdul Rahman, Mohd Zaki (2006) Mould flow and component design analysis of polymeric based composite automotive clutch pedals. Journal of Materials Processing Technology, 171 (3). pp. 358-365. ISSN 0924-0136

Tan, Kean Sheng and Wong, Shaw Voon and Radin Sohadi, Radin Umar and Hamouda, Abdel Magid Salem and Megat Ahmad, Megat Mohamad Hamdan (2006) Experimental study on energy absorption characteristics of motorcycle front wheel—tyre assembly in frontal impact. International Journal of Crashworthiness, 11 (2). pp. 131-142. ISSN 1358-8265; ESSN: 1754-2111

Md Rejab, Mohd Noor Arib and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Md. Tahir, Paridah and Mohd Dahlan, Khairul Zaman (2006) Mechanical properties of pineapple leaf fibre reinforced polypropylene composites. Materials and Design, 27 (5). pp. 391-396. ISSN 0264-1275; ESSN: 1873-4197

Ooi, Soo Shen and Wong, Shaw Voon and Radin Sohadi, Radin Umar and Abdul Aziz, Azhar and Megat Ahmad, Megat Mohamad Hamdan (2005) Cervical spine injuries sustained by motorcyclists in road crashes in Malaysia. International Journal of Crashworthiness, 10 (3). pp. 295-303. ISSN 1358-8265; ESSN: 1754-2111

Bani Hashim, Ahmad Yusairi and Ismail, Napsiah and Megat Ahmad, Megat Mohamad Hamdan and Salem Hamouda, Abdel Magid and Osman, Mohd Rasid (2004) Application of Soft Computing to Serial Manipulator Kinematic Problems. Pertanika Journal of Science & Technology, 12 (2). pp. 191-200. ISSN 0128-7680

Mohd Yusuff, Rosnah and Megat Ahmad, Megat Mohamad Hamdan and Osman, Mohd Rasid (2004) Barriers to advanced manufacturing technologies implementation in the small and medium scales industries of a developing country. International Journal of Engineering and Technology, 1 (1). 39 -46. ISSN 1823-1039

Shuaeib, Farag Mohamed and Wong, Shaw Voon and Tan, Kean Sheng and Salem Hamouda, Abdel Magid and Radin Sohadi, Radin Umar and Megat Ahmad, Megat Mohamad Hamdan (2004) Drop Weight Testing Rig Analysis and Design. Pertanika Journal of Science & Technology, 12 (2). pp. 159-175. ISSN 0128-7680

Ooi, Soo Shen and Wong, Shaw Voon and Radin Sohadi, Radin Umar and Abdul Aziz, Azhar and Yeap, J. S. and Megat Ahmad, Megat Mohamad Hamdan (2004) Mechanisms of Cervical Spine Injuries for Non-Fatal Motorcycle Road Crash. Medical Journal of Malaysia, 59 (2). pp. 146-152. ISSN 0300-5283

How, C. K. and Salem Hamouda, Abdel Magid and Megat Ahmad, Megat Mohamad Hamdan and Radin Sohadi, Radin Umar (2003) The Crashing Behaviour of Motorcycle Basket under Impact Loading. Journal of Materials Processing Technology, 132 (1-3). pp. 1-8. ISSN 0924-0136

Shuaeib, Farag Mohamed and Salem Hamouda, Abdel Magid and Radin Sohadi, Radin Umar and Megat Ahmad, Megat Mohamad Hamdan and M. Saleem, J. Hashmi (2002) Motorcycle Helmet Part I. Biomechanics and Computational Issues. Journal of Materials Processing Technology, 123 (3). pp. 406-421. ISSN 0924-0136

Shuaeib, Farag Mohamed and Salem Hamouda, Abdel Magid and Megat Ahmad, Megat Mohamad Hamdan and Radin Sohadi, Radin Umar and M. Saleem, J. Hashmi (2002) Motorcycle Helmet Part II. Materials and Design Issues. Journal of Materials Processing Technology, 123 (3). pp. 422-431. ISSN 0924-0136

Molla, Md. Abul Hossain and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Leman, Zulkiflle and Ismail, Md. Yusof (2002) Operational characteristics and determination of resistance for effective powering and propulsion of fishing boats of lower Perak River of Malaysia. Pertanika Journal of Science & Technology, 10 (1). pp. 63-71. ISSN 0128-7680

How, C. K. and Harwant Singh, and Megat Ahmad, Megat Mohamad Hamdan and Radin Sohadi, Radin Umar and Salem Hamouda, Abdel Magid (2001) Crash Simulation of Lower Limb with Motorcycle Basket. Medical Journal of Malaysia, 56 (1). pp. 77-81. ISSN 0300-5283

Osman, Mohd Rasid and Mohd. Yusuff, Rosnah and Megat Ahmad, Megat Mohamad Hamdan and Chew, C. Y. (2001) Employees' Reactions and Factors in the Implementation of ISO 9000 in Manufacturing Companies. Pertanika Journal of Science & Technology, 9 (2). pp. 199-207. ISSN 0128-7680

Conference or Workshop Item

Rashdi, Abdalla A. Ab. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Abdan, Khalina (2009) Effect of moisture absorption on the mechanical properties of soil buried kenaf fibre reinforced unsaturated polyester composites. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 114-123).

Hadi, Agung Efriyo and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Mohd Dahlan, Khairul Zaman and Usman, Mustofa (2009) Fabrication and impact properties of short abaca (Musa textile Nee) fiber-reinforced high impact polystyrene (HIPS) composite. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 270-275).

Rashdi, Abdalla A. Ab. and Salit, Mohd Sapuan and Megat Ahmad, Megat Mohamad Hamdan and Abdan, Khalina (2009) Influence of water absorption in mechanical properties of natural fibres from kenaf unsaturated polyester composites. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 124-132).

Esmaeilian, Gholamreza and Megat Ahmad, Megat Mohamad Hamdan and Ismail, Napsiah and Sulaiman, Shamsuddin and Hamedi, Maryam (2008) Particular model for improving failure mode and effect analysis (FMEA) by using of overall equipment efficiency (OEE). In: 3rd International Symposium on Information Technology (ITSim'08), 26-28 Aug. 2008, Kuala Lumpur, Malaysia. .

Esfandyari , Alireza and Osman, Mohd Rasid and Ismail, Napsiah and Megat Ahmad, Megat Mohamad Hamdan (2006) Value stream mapping: a tool to design the future state map aligned with lean manufacturing principles. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 342-350).

Anuar, A. and Mohd. Yusuff, Rosnah and Megat Ahmad, Megat Mohamad Hamdan and Abdul Aziz, M. (2005) Development of manufacturing key performance indicators for Malaysian Small and Medium Industries (SMIS). In: International Advanced Technology Congress: Conference on Computer Integrated Systems, 6 - 8 Dec. 2005, Putrajaya, Malaysia. .

Lim, Y. P. and Sulaiman, Shamsuddin and Hamouda, Abdel Magid Salem and Megat Ahmad, Megat Mohamad Hamdan (2005) The combined effect of Al-5Ti-1B and Al-10Sr on the metallurgical properties of LM6 Al-Si sand castings. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6 - 8 Dec. 2005, Putrajaya, Malaysia. (pp. 394-407).

Lim, Y. P. and Sulaiman, Shamsuddin and Hamouda, Abdel Magid Salem and Megat Ahmad, Megat Mohamad Hamdan (2005) An experimental investigation on LM6 AL-SI alloy sand casting to study the correlation between metallurgical properties and solidification rate. In: International Advanced Technology Congress: Conference on Advanced Materials (CAM 2005), 6 - 8 Dec. 2005, Putrajaya, Malaysia. (pp. 169-180).

Abas, Fuad and Megat Ahmad, Megat Mohamad Hamdan (1989) Ke arah penyenggaraan dan pengurusan alatan makmal yang berkesan. In: Seminar Penyenggaraan dan Pengurusan Peralatan Makmal, 20-22 June 1989, PPPL, UPM, Serdang. (pp. 1-14).

Patent

Wong Shaw Voon (2014) An inertia measurement apparatus. PI2014700830.

Mohd Sapuan Salit (2009) Wind power station. UNSPECIFIED.

Mohd Sapuan Salit (2009) Turn bridge. UNSPECIFIED.

Wong Shaw Voon (2008) Pendulum impact test rig. UNSPECIFIED.

Wong Shaw Voon (2008) Comfortable motorcycle helmet. UNSPECIFIED.

Wong Shaw Voon (2006) Pendulum impact test rig. UNSPECIFIED.

Mohd Sapuan Salit (2005) Apparatus for machining spiral tooth of a spiral bevel gear. UNSPECIFIED.

Megat Mohamad Hamdan Megat Ahmad (2004) Valve arrangement of internal combustion engine. UNSPECIFIED.

Radin Umar Radin Sohadi (2003) Motorcycle helmet for children. UNSPECIFIED.

This list was generated on Wed Feb 26 09:53:01 2020 UTC.