Items where Author is "Hameed Sultan, Mohamed Thariq"

Mat Yazik, Muhamad Hasfanizaam and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Mazlan, Norkhairunnisa and Abu Talib, Abd Rahim and Md Shah, Ain Umaira and Safri, Syafiqah Nur Azrie (2024) Shape memory properties of epoxy with hybrid multi-walled carbon nanotube and montmorillonite nanoclay nanofiller. Polymer Bulletin, 81 (1). pp. 951-968. ISSN 0170-0839; ESSN: 1436-2449

Nayak, Suhas Yeshwant and Shenoy B., Satish and Kini, Chandrakant R. and Hameed Sultan, Mohamed Thariq and Shahar, Farah Syazwani (2022) Experimental investigation into mechanical properties of coconut shell powder modified epoxy/ 3d E-glass composites. Engineered Science, 20. pp. 306-320. ISSN 2576-988X

Pandian, Amuthakkannan and Hameed Sultan, Mohamed Thariq and Manikandan, Vairavan and Marimuthu, Uthayakumar and Kanagaraj, Arun Prasath and Khan, Tabrej (2022) Effect of stacking sequence of glass and jute fiber reinforced polymer composites on their low velocity impact properties. Journal of Composite Materials, 56 (16). pp. 2599-2608. ISSN 0021-9983; ESSN: 1530-793X

Arumugam, Soundhar and Kandasamy, Jayakrishna and Venkatesan, Subramani and Murugan, Rajesh and Narayanan, Valayapathy Lakshmi and Hameed Sultan, Mohamed Thariq and Shahar, Farah Syazwani and Md Shah, Ain Umaira and Khan, Tabrej and Sebaey, Tamer Ali (2022) A review on the effect of fabric reinforcement on strength enhancement of natural fiber composites. Materials, 15 (9). art. no. 3025. pp. 1-33. ISSN 1996-1944

Ganapathy, Sakthi Balan and Sakthivel, Aravind Raj and Hameed Sultan, Mohamed Thariq and Shahar, Farah Syazwani and Md Shah, Ain Umaira and Khan, Tabrej and Sebaey, Tamer A. (2022) Effect of Prosopis juliflora thorns on mechanical properties of plastic waste reinforced epoxy composites. Polymers, 14 (7). art. no. 1278. pp. 1-19. ISSN 2073-4360

Ahmad Nadzri, Seri Nur Zumaimi and Md Shah, Ain Umaira and Hameed Sultan, Mohamed Thariq and Safri, Syafiqah Nur Azrie and Shahar, Farah Syazwani and Basri, Adi Azriff (2022) Failure mechanisms of kenaf/glass sandwich laminates subjected to low velocity impact loading. Journal of Industrial Textiles, 51 (3). 4167 - 4183. ISSN 1528-0837; ESSN: 1530-8057

Shinde, Avinash Sudam and Siva, Irulappasamy and Munde, Yashwant and Hameed Sultan, Mohamed Thariq and Lee, Seng Hua and Shahar, Farah Syazwani (2022) Numerical modelling of drilling of fiber reinforced polymer matrix composite: a review. Journal of Materials Research and Technology, 20. pp. 3561-3578. ISSN 2238-7854; ESSN: 2214-0697

Khan, Tabrej and Singh, Balbir and Hameed Sultan, Mohamed Thariq and Ahmad, Kamarul Arifin (2022) Performance of a HAWT rotor with a modified blade configuration. Pertanika Journal of Science & Technology, 30 (1). pp. 201-230. ISSN 0128-7680; ESSN: 2231-8526

Hashim, Mohd Khairul Rabani and Abdul Majid, Mohd Shukry and Mohd Jamir, Mohd Ridzuan and Kasim, Farizul Hafiz and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Ahmad, Kamarul Arifin and Basri, Adi Azriff (2021) The effect of stacking sequence on fatigue behaviour of hybrid pineapple leaf fibre/carbon-fibre-reinforced epoxy composites. Polymers, 13 (22). art. no. 3936. pp. 1-16. ISSN 2073-4360

Shinde, Avinash and Siva, I. and Munde, Yashwant and Deore, Vishal and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Mustapha, Faizal (2021) Testing of silicon rubber/montmorillonite nanocomposite for mechanical and tribological performance. Nanomaterials, 11 (11). art. no. 3050. pp. 1-15. ISSN 2079-4991

Tay, Chai Hua and Mazlan, Norkhairunnisa and Hameed Sultan, Mohamed Thariq and Abdan, Khalina and Lee, Ching Hao (2021) Mechanical performance of hybrid glass/kenaf epoxy composite filled with organomodified nanoclay. Journal of Materials Research and Technology, 15. 4415 - 4426. ISSN 2238-7854

Ibrahim, Nor Izaida and Shahar, Farah Syazwani and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Safri, Syafiqah Nur Azrie and Mat Yazik, Muhamad Hasfanizam (2021) Overview of bioplastic introduction and its applications in product packaging. Coatings, 11 (11). art. no. 1423. pp. 1-23. ISSN 2079-6412

Loganathan, Tamil Moli and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Ahsan, Qumrul and Naveen, Jesuarockiam and Md Shah, Ain Umaira and Abu Talib, Abd. Rahim and Basri, Adi Azriff (2021) Physical, mechanical, and morphological properties of hybrid Cytostachys renda/kenaf fiber reinforced with multi-walled carbon nanotubes MWCNT-phenolic composites. Polymers, 13 (19). art. no. 3448. pp. 1-18. ISSN 2073-4360

Najeeb, Muhammad Imran and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Muhammad Amir, Siti Madiha and Safri, Syafiqah Nur Azrie and Jawaid, Mohammad and Shari, Mohamad Rabaie (2021) Low velocity impact analysis of pineapple leaf fiber (PALF) hybrid composites. Polymers, 13 (18). art. no. 3194. pp. 1-18. ISSN 2073-4360

Budholiya, Sejal and Bhat, Aayush and Raj, S. Aravind and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Basri, Adi A. (2021) State of the art review about bio-inspired design and applications: an aerospace perspective. Applied Sciences, 11 (11). pp. 1-23. ISSN 2076-3417

Rabani Hashim, Mohd Khairul and Abdul Majid, Mohd Shukry and Mohd Jamir, Mohd Ridzuan and Kasim, Farizul Hafiz and Hameed Sultan, Mohamed Thariq (2021) The effect of stacking sequence and ply orientation on the mechanical properties of pineapple leaf fibre PALF/carbon hybrid laminate composites. Polymers, 13 (3). art. no. 455. Jan-24. ISSN 2073-4360

Basri, Ernnie Illyani and Hameed Sultan, Mohamed Thariq and Basri, Adi Azriff and Mustapha, Faizal (2021) Consideration of lamination structural analysis in a multi-layered composite and failure analysis on wing design application. Materials, 14 (13). art. no. 3705. pp. 1-10. ISSN 1996-1944

Anwar, Murniwati and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Abdul Halin, Izhal and Abdullah, Mohd Na'im and Hassim, Mohamad Iswady and Mustapha, Mazli (2021) Damage identification on impact and lightning damage of flax composite laminates (Linum usitatissimum) using long-pulse thermography of a low-resolution infrared camera. Frontiers in Materials, 8. pp. 1-16. ISSN 2296-8016

Nayak, Suhas Yeshwant and Shenoy, Satish and Hameed Sultan, Mohamed Thariq and Kini, Chandrakant R. and Seth, Aashna and Prabhu, Shrinivasa and Safri, Syafiqah Nur Azrie (2021) Effect of CNT-based resin modification on the mechanical properties of polymer composites. Frontiers in Materials, 7. art. no. 609010. pp. 1-35. ISSN 2296-8016

Loganathan, Tamil Moli and Hameed Sultan, Mohamed Thariq and Ahsan, Qumrul and Jawaid, Mohammad and Naveen, Jesuarockiam and Md Shah, Ain Umaira and Abu Talib, Abd. Rahim and Basri, Adi Azriff and Jaafar, Che Nor Aiza (2021) Effect of Cyrtostachys renda fiber loading on the mechanical, morphology, and flammability properties of multi-walled carbon nanotubes/phenolic bio-composites. Nanomaterials, 11 (11). pp. 1-25. ISSN 2079-4991

Sanmuham, Vikneswari and Hameed Sultan, Mohamed Thariq and Ali, Mohd Radzi and Shamsuri, Ahmad Adlie and Md Shah, Ain Umaira and Safri, Syafiqah Nur Azrie and Basri, Adi Azriff (2021) Effect of silver nanopowder on mechanical, thermal and antimicrobial properties of kenaf/HDPE composites. Polymers, 13 (22). pp. 1-14. ISSN 2073-4360

Shahar, Farah Syazwani and Hameed Sultan, Mohamed Thariq and Safri, Syafiqah Nur Azrie and Jawaid, Mohammad and Abu Talib, Abd. Rahim and Basri, Adi Azriff and Md Shah, Ain Umaira (2021) Fatigue and impact properties of 3D printed PLA reinforced with kenaf particles. Journal of Materials Research and Technology-JMR&T, 16. 461 - 470. ISSN 2214-0697; ESSN: 2238-7854

Mazlan, Norkhairunnisa and Tay, Chai Hua and Hameed Sultan, Mohamed Thariq and Abdan, Khalina (2021) Thermogravimetric and dynamic mechanical analysis of woven glass/kenaf/epoxy hybrid nanocomposite filled with clay. Advances in Materials and Processing Technologies, 7 (1). 166 - 179. ISSN 2374-068X; ESSN: 2374-0698

Kirmasha, Yasir Khaleel and Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq (2020) Mechanical performance of unstitched and silk fiber-stitched woven kenaf fiber reinforced epoxy composites. Materials, 13 (21). pp. 1-14. ISSN 1996-1944

Yusof, N. S. B. and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad (2020) Materials selection of “green” natural fibers in polymer composite automotive crash box using DMAIC approach in Six Sigma method. Journal of Engineered Fibers and Fabrics, 15. pp. 1-13. ISSN 1558-9250

Yusof, Nik Syamsul Bahari and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad (2020) Manufacturing process selection of “green” oil palm natural fiber reinforced polyurethane composites using hybrid TEA criteria requirement and AHP method for automotive crash box. Journal of Renewable Materials, 8 (6). 647 - 660. ISSN 2164-6325; ESSN: 2164-6341

A.M., Noor Azammi and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Hameed Sultan, Mohamed Thariq (2020) Physical and damping properties of kenaf fibre filled natural rubber/thermoplastic polyurethane composites. Defence Technology, 16 (1). 29 - 34. ISSN 2214-9147

Loganathan, Tamil Moli and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Md Shah, Ain Umaira and Ahsan, Qumrul and Mariapan, Manohar and Abdul Majid, Mohd Shukry (2020) Physical, thermal and mechanical properties of areca fibre reinforced polymer composites — an overview. Journal of Bionic Engineering, 17. 185 - 205. ISSN 1672-6529; ESSN: 2543-2141

E.F., Sucinda and Abdul Majid, Mohd Shukry and Mohd Jamir, Mohd Ridzuan and Hameed Sultan, Mohamed Thariq and A.G., Gibson (2020) Analysis and physicochemical properties of cellulose nanowhiskers from Pennisetum purpureum via different acid hydrolysis reaction time. International Journal of Biological Macromolecules, 155. 241 - 248. ISSN 0141-8130; ESSN: 1879-0003

Loganathan, Tamil Moli and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Ahsan, Qumrul and Naveen, Jesuarockiam and Perumal, Velu (2020) Characterization of new cellulosic Cyrtostachys renda and Ptychosperma macarthurii fibers from landscaping plants. Journal of Natural Fibers, 19 (2). pp. 669-684. ISSN 1544-0478; ESSN: 1544-046X

Najeeb, Muhammad Imran and Hameed Sultan, Mohamed Thariq and Andou, Yoshito and Md. Shah, Ain Umaira and Eksiler, Kubra and Jawaid, Mohammad and Ariffin, Ahmad Hamdan (2020) Characterization of silane treated Malaysian Yankee Pineapple AC6 leaf fiber (PALF) towards industrial applications. Journal of Materials Research and Technology, 9 (3). 3128 - 3139. ISSN 2238-7854; ESSN: 2214-0697

Ahmad Faris, Ahmad Fariduddin and Basri, Adi Azriff and Basri, Ernnie Illyani and Gires, Ezanee and Hameed Sultan, Mohamed Thariq and Ahmad, Kamarul Arifin (2020) Computation fluid dynamics study on aerodynamics blade design of Advance Precision Composite (APC) slow flyer propeller. International Journal of Mechanical and Production Engineering Research and Development, 10 (6). 265 - 280. ISSN 2249–6890; ESSN: 2249–8001

Che Yusof, Nik Syamsul Bahari and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad (2020) Conceptual design of oil palm fibre reinforced polymer hybrid composite automotive crash box using integrated approach. Journal of Central South University, 27 (1). 64 - 75. ISSN 2095-2899; ESSN: 2227-5223

Hilo, Ali Kareem and Abu Talib, Abd Rahim and Iborra, Antonio Acosta and Hameed Sultan, Mohamed Thariq and Abdul Hamid, Mohd Faisal (2020) Effect of corrugated wall combined with backward-facing step channel on fluid flow and heat transfer. Energy, 190. art. no. 116294. pp. 1-10. ISSN 0360-5442; ESSN: 1873-6785

Siew, Sand Chee and Jawaid, Mohammad and Hameed Sultan, Mohamed Thariq and Alotmane, Othman Y. and Abdullah, Luqman Chuah (2020) Effects of nanoclay on physical and dimensional stability of bamboo/kenaf/nanoclay reinforced epoxy hybrid nanocomposites. Journal of Materials Research and Technology, 9 (3). 5871 - 5880. ISSN 2238-7854; ESSN: 2214-0697

Randjbaran, Elias and Majid, Dayang L. and Zahari, Rizal and Hameed Sultan, Mohamed Thariq and Mazlan, Norkhairunnisa (2020) Effects volume of carbon nanotubes on the angled ballistic impact for Carbon Kevlar Hybrid fabrics. Facta Universitatis, Series: Mechanical Engineering, 18 (2). 229 - 244. ISSN 0354-02025; ESSN: 2335-0164

Hilo, Ali Kareem and Abu Talib, Abd Rahim and Iborra, Antonio Acosta and Hameed Sultan, Mohamed Thariq and Abdul Hamid, Mohd Faisal (2020) Experimental study of nanofluids flow and heat transfer over a backward-facing step channel. Powder Technology, 372. 497 - 505. ISSN 0032-5910; ESSN: 1873-328X

Abed, Sadeq Salman and Abu Talib, Abd. Rahim and Saadon, Syamimi and Hameed Sultan, Mohamed Thariq (2020) Hybrid nanofluid flow and heat transfer over backward and forward steps: a review. Powder Technology, 363. 448 - 472. ISSN 0032-5910; ESSN: 1873-328X

Muhammad Amir, Siti Madiha and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Jawaid, Mohammad and Safri, Syafiqah Nur Azrie and Mohd, Shukri and Mohd Salleh, Khairul Anuar (2020) Low velocity impact and compression after impact properties on gamma irradiated Kevlar/oil palm empty fruit bunch hybrid composites. Coatings, 10 (7). pp. 1-15. ISSN 2079-6412

Hajjaj, Sami Salama Hussen and Hameed Sultan, Mohamed Thariq and Moktar, Muhammad Hafizuddin and Lee, Seng Hua (2020) Utilizing the internet of things (IoT) to develop a remotely monitored autonomous floodgate for water management and control. Water, 12 (2). art. no. 502. pp. 1-18. ISSN 2073-4441

Ahmad Nadzri, Seri Nur Zumaimi and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Safri, Syafiqah Nur Azrie and Basri, Adi Azriff (2020) A review on the kenaf/glass hybrid composites with limitations on mechanical and low velocity impact properties. Polymer, 12 (6). art. no. 1285. pp. 1-13. ISSN 2073-4360

Abd Murat, Noor Azammi and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan (2019) Structural modelling on automotive engine mounting from kenaf fiber reinfoced natural rubber/thermoplastic polyurethane green composites. International Journal of Recent Technology and Engineering, 8 (2 spec. 4). pp. 445-449. ISSN 2277-3878

Jesuarockiam, Naveen and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan and Abdul Majid, M. S. (2019) Thermal degradation and viscoelastic properties of Kevlar/Cocos nucifera sheath reinforced epoxy hybrid composites. Composite Structures, 219. pp. 194-202. ISSN 0263-8223; ESSN 1879-1085

Basri, Ernnie Illyani and Hameed Sultan, Mohamed Thariq and Mustapha, Faizal and Basri, Adi Azriff and Ahmad, Kamarul Arifin (2019) Unmanned Aerial Vehicle (UAV) structural and manufacturing of conventional and humpback Tubercles Leading Edge (TLE) in aeronautical applications. International Journal of Recent Technology and Engineering, 8 (1 spec. 5). pp. 479-496. ISSN 2277-3878

Mazlan, Ali Ahmad and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira (2019) The effects of different length of pineapple leaf fibre (PALF) on tensile properties of random oriented composites. International Journal of Recent Technology and Engineering, 8 (1 spec. 5). pp. 397-399. ISSN 2277-3878

Ismail, Khairul Izwan and Hameed Sultan, Mohamed Thariq and Md. Shah, Ain Umaira and Jawaid, Mohammad and Safri, Syafiqah Nur Azrie (2019) Low velocity impact and compression after impact properties of hybrid bio-composites modified with multi-walled carbon nanotubes. Composites Part B: Engineering, 163. pp. 455-463. ISSN 1359-8368; ESSN: 1879-1069

Md Shah, Ain Umaira and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad (2019) Sandwich-structured bamboo powder/glass fibre-reinforced epoxy hybrid composites – mechanical performance in static and dynamic evaluations. Journal of Sandwich Structures & Materials, 23 (1). pp. 1-17. ISSN 1099-6362; ESSN: 1530-7972

Safri, Syafiqah Nur Azrie and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Abdul Majid, Mohd Shukry (2019) Analysis of dynamic mechanical, low-velocity impact and compression after impact behaviour of benzoyl treated sugar palm/glass/epoxy composites. Composite Structures, 226. art. no. 111308. pp. 1-8. ISSN 0263-8223; ESSN: 1879-1085

Basri, Ernnie Illyani and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Basri, Adi Azriff and Abas, Mohd Firdaus and Abdul Majid, Mohd Shukry and Ahmad, Kamarul Arifin (2019) Conceptual design and simulation validation based finite element optimisation for tubercle leading edge composite wing of an unmanned aerial vehicle. Journal of Materials Research and Technology-JMR&T, 8 (5). pp. 4374-4386. ISSN 2238-7854

Hamidon, Muhammad Hafizal and Hameed Sultan, Mohamed Thariq and Ariffin, Ahmad Hamdan and Md Shah, Ain Umaira (2019) Effects of fibre treatment on mechanical properties of kenaf fibre reinforced composites: a review. Journal of Materials Research and Technology, 8 (3). pp. 3327-3337. ISSN 2238-7854

Muhammad Amir, Siti Madiha and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Safri, Syafiqah Nur Azrie and Md Shah, Ain Umaira and Yusof, Mohd Ridzuan and Arockiam, Naveen Jesu and Mohd, Shukri and Salleh, Khairul A. M. and Saba, Naheed (2019) Effects of layering sequence and gamma radiation on mechanical properties and morphology of Kevlar/oil palm EFB/epoxy hybrid composites. Journal of Materials Research and Technology, 8 (6). pp. 5362-5373. ISSN 2238-7854

Naveen, Jesuarockiam and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan (2019) Enhanced thermal and dynamic mechanical properties of synthetic/natural hybrid composites with graphene nanoplateletes. Polymers, 11 (7). art. no. 1085. pp. 1-18. ISSN 2073-4360

Rayney Azmi, Ahmad Mustafa and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Md Shah, Ain Umaira and Mohd Nor, Ariff Farhan and Abdul Majid, Mohd Shukry and Muhamad, Sallehuddin and Abu Talib, Abd. Rahim (2019) Impact properties of kenaf fibre/X-ray films hybrid composites for structural applications. Journal of Materials Research and Technology, 8 (2). pp. 1982-1990. ISSN 2238-7854; ESSN: 2044-5326

Jesuarockiam, Naveen and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan (2019) Improved mechanical and moisture resistant properties of woven hybrid epoxy composites by graphene nanoplatelets (GNP). Materials, 12 (8). art. no. 1249. pp. 1-18. ISSN 1996-1944

Naveen, Jesuarockiam and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan (2019) Improved mechanical and moisture-resistant properties of woven hybrid epoxy composites by graphene nanoplatelets (GNP). Materials, 12 (8). art. no. 1249. pp. 1-18. ISSN 1996-1944

Mohd Zulkifle, Muhammad Fitri and Abu Talib, Abd. Rahim and Gires, Ezanee and Hameed Sultan, Mohamed Thariq (2019) Investigation on the effect of sample preparation on the performance of thermochromic liquid crystal. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (2). pp. 150-164. ISSN 2289-7879

Ismail, Muhammad Faizzuddin and Hameed Sultan, Mohamed Thariq and Ariffin, Ahmad Hamdan and Md. Shah, Ain Umaira and Jawaid, Mohammad (2019) Low velocity impact behaviour and post-impact characteristics of kenaf/glass hybrid composites with various weight ratios. Journal of Materials Research and Technology, 8 (3). pp. 2662-2673. ISSN 2238-7854

Arockiam, Naveen Jesu and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and R., Yahaya (2019) Mechanical and moisture diffusion behaviour of hybrid Kevlar/Cocos nucifera sheath reinforced epoxy composites. Journal of Materials Research and Technology, 8 (1). pp. 1308-1318. ISSN 2238-7854

Mohd Zulkeple, Muhammad Fitri and Abu Talib, Abd Rahim and Gires, Ezanee and Hameed Sultan, Mohamed Thariq (2019) Microencapsulation and thickness effect on the occurrence of hysteresis of thermochromic liquid crystal calibration. Journal of Aeronautics, Astronautics and Aviation, 51 (2). pp. 171-182. ISSN 1990-7710

Basri, Ernnie Illyani and Hameed Sultan, Mohamed Thariq and Mustapha, Faizal and Basri, Adi Azriff and Abas, Mohd Firdaus and Abdul Majid, Mohd Shukry and Mandeep, Jit Singh and Ahmad, Kamarul Arifin (2019) Performance analysis of composite ply orientation in aeronautical application of unmanned aerial vehicle (UAV) NACA4415 wing. Journal of Materials Research and Technology, 8 (5). pp. 3822-3834. ISSN 2238-7854

Basri, Ernnie Illyani and Basri, Adi Azriff and Abas, Mohd. Firdaus and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Ahmad, Kamarul Arifin (2019) UAV NACA4415 wing structural performance analysis subjected to external aerodynamic load using Schrenk’s approximation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (2). pp. 178-190. ISSN 2289-7879

Jawaid, Mohammad and Hameed Sultan, Mohamed Thariq and Saba, Naheed and Lau, Kia Kian (2019) A review on processing techniques of bast fibers nanocellulose and its polylactic acid (PLA) nanocomposites. International Journal of Biological Macromolecules, 121. pp. 1314-1328. ISSN 0141-8130; ESSN: 1879-0003

Hameed Sultan, Mohamed Thariq and Safri, Syafiqah Nur Azrie and Md. Shah, Ain Umaira and Jawaid, Mohammad and Lee, Seng Hua and Shahar, Farah Syazwani and Sivasankaran, Praveena Nair (2019) A review on the orthotics and prosthetics and the potential of kenaf composites as alternative materials for ankle-foot orthosis. Journal of the Mechanical Behavior of Biomedical Materials, 99. pp. 169-185. ISSN 1751-6161

Ariffin, Ahmad Hamdan and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq (2018) The macro-fibre composite–bonded effect analysis on the micro-energy harvester performance and structural health–monitoring system of woven kenaf turbine blade for vertical axis wind turbine application. Advances in Mechanical Engineering, 10 (9). pp. 1-10. ISSN 1687-8132

Abd Murat, Noor Azammi and Salit, Mohd Sapuan and Ishak, Mohamad Ridzwan and Hameed Sultan, Mohamed Thariq (2018) Conceptual design of automobile engine rubber mounting composite using TRIZ-Morphological chart-analytic network process technique. Defence Technology, 14 (4). 268 - 277. ISSN 2096-3459; ESSN: 2214-9147

Rajesh, Murugan and Hameed Sultan, Mohamed Thariq and Uthayakumar, Marimuthu and Jayakrishna, Kandasamy and Md Shah, Ain Umaira (2018) Dynamic behaviour of woven bio fiber composite. BioResources, 13 (1). 1951 - 1960. ISSN 1930-2126

Mohammed, Ibrahim and Abu Talib, Abd Rahim and Hameed Sultan, Mohamed Thariq and Saadon, Syamimi (2018) Fire behavioural and mechanical properties of carbon fibre reinforced aluminium laminate composites for aero-engine. International Journal of Engineering and Technology, 7 (4 spec.13). art. no. 21323. 22 - 27. ISSN 2227-524X

Azrie Safri, Syafiqah Nur and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Jayakrishna, Kandasamy (2018) Impact behaviour of hybrid composites for structural applications: a review. Composites Part B Engineering, 133. 112 - 121. ISSN 359-8368; ESSN: 1879-1069

Ismail, Ahmad Safwan and Jawaid, Mohammad and Hameed Sultan, Mohamed Thariq and Zakaria, Azman (2018) Preliminary study on tensile and impact properties of kenaf / bamboo fiber reinforced epoxy composites. Journal of Renewable Materials, 6. 529 - 535. ISSN 2164-6325; ESSN: 2164-6341

Salman, Suhad D. and Leman, Zulkifli and Ishak, Mohamad Ridzwan and Hameed Sultan, Mohamed Thariq and Cardona, F. (2018) Quasi-static penetration behavior of plain woven kenaf/aramid reinforced polyvinyl butyral hybrid laminates. Journal of Industrial Textiles, 47 (7). 1427 - 1446. ISSN 1528-0837; ESSN: 1530-8057

Hilo, Ali and Abu Talib, Abd Rahim and Nfawa, Sadeq Rashid and Hameed Sultan, Mohamed Thariq and Abdul Hamid, Mohd Faisal (2018) Review of improvements on heat transfer using nanofluids via corrugated facing step. International Journal of Engineering and Technology, 7 (4 spec.13). art. no. 21350. 160 - 169. ISSN 2227-524X

Arockiam, Naveen Jesu and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan (2018) Selection of natural fiber for hybrid kevlar/natural fiber reinforced polymer composites for personal body armor by using analytical hierarchy process. Frontiers in Materials, 5. art. no. 52. pp. 1-13. ISSN ESSN: 2296-8016

Rayney Azmi, Ahmad Mustafa and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Abu Talib, Abd Rahim and Mohd Nor, Ariff Farhan (2018) Tensile and flexural properties of a newly developed bulletproof vest using a kenaf/x-ray film hybrid composite. BioResources, 13 (2). 4416 - 4427. ISSN ESSN: 1930-2126

Ismail, Khairul Izwan and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Mazlan, Norkhairunnisa and Ariffin, Ahmad Hamdan (2018) Tensile properties of hybrid biocomposite reinforced epoxy modified with carbon nanotube (CNT). BioResources, 13 (1). 1787 - 1800. ISSN ESSN: 1930-2126

Haider, Nawras Haidar Mostafa Meir Al-Said and Zahari, Nur Ismarrubie and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq (2018) Theoretical development of biaxial fabric prestressed composites under tension-tension fatigue loading. Pertanika Journal of Science & Technology, 26 (3). pp. 1253-1264. ISSN 0128-7680; ESSN: 2231-8526

Mohammed, Ibrahim and Abu Talib, Abd Rahim and Hameed Sultan, Mohamed Thariq and Saadon, Syamimi (2018) Thermal properties of HL002-TA/B epoxy resin/hardener in fibre metal laminates composites for aero-engine. International Journal of Pure and Applied Mathematics, 119 (15). 3761 - 3769. ISSN 1311-8080

Mohd Nor, Ariff Farhan and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Abu Talib, Abd. Rahim and Rayney Azmi, Ahmad Mustafa and Harmaen, Ahmad Saffian and Mohamed Asa’ari, Ainun Zuriyati (2018) The effects of multi-walled CNT in bamboo/glass fibre hybrid composites: tensile and flexural properties. BioResources, 13 (2). 4404 - 4415. ISSN 1930-2126

Ariffin, Ahmad Hamdan and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq (2018) The macro-fibre composite-bonded effect analysis on the micro-energy harvester performance and structural health-monitoring system of woven kenaf turbine blade for vertical axis wind turbine application. Advances in Mechanical Engineering, 10 (9). pp. 1-10. ISSN 1687-8140; ESSN: 1687-8140

Mokkandi, Purusothaman and Jayamani, Manivannan and Sekarbabu, Balakiruthiha and Kadambarajan, Jeya Prakash and Nagarajan, Rajini and Hameed Sultan, Mohamed Thariq and Shanmugavel, Rajesh (2017) Machinability performance of Al–NiTi and Al–NiTi–nano SiC composites with parametric optimization using GSA. Journal of the Australian Ceramic Society, 53 (2). 599 - 609. ISSN 2510-1560; ESSN: 2510-1579

Mostafa, Nawras H. and Zahari, Nur Ismarrubie and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq (2017) Fibre prestressed composites: theoretical and numerical modelling of unidirectional and plain-weave fibre reinforcement forms. Composite Structures, 159. pp. 410-423. ISSN 0263-8223; ESSN: 1879-1085

Haider, Nawras Haidar Mostafa Meir Al-Said and Zahari, Nur Ismarrubie and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq (2017) Fibre prestressed polymer-matrix composites: a review. Journal of Composite Materials, 51 (1). pp. 39-66. ISSN 0021-9983; ESSN: 1530-793X

Safri, Syafiqah Nur Azrie and Hameed Sultan, Mohamed Thariq and Cardona, Francisco (2017) Impact characterisation of glass fibre-reinforced polymer (GFRP) Type C-600 and E-800 using a single stage gas gun (SSGG). Pertanika Journal of Science & Technology, 25 (1). pp. 303-316. ISSN 0128-7680; ESSN: 2231-8526

Hameed Sultan, Mohamed Thariq and Ali, Mubarak and Joshi, S. C. (2017) Palliatives for low velocity impact damage in composite laminates. Advances in Materials Science and Engineering. pp. 1-17. ISSN 1687-8442; ESSN: 1687-8434

Senthilkumar, Krishnasamy and Siva, Irulappasamy and Hameed Sultan, Mohamed Thariq and Rajini, Nagarajan and Siengchin, Suchart and Jawaid, Mohamad and Hamdan, Ahmad (2017) Static and dynamic properties of sisal fiber polyester composites – effect of interlaminar fiber orientation. BioResources, 12 (4). 7819 - 7833. ISSN 1930-2126

Razali, Noorshazlin and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad (2017) A review on detecting and characterizing damage mechanisms of synthetic and natural fiber based composites. Bioresources, 12 (4). 9502 - 9519. ISSN 1930-2126; ESSN: 1930-2126

Mostafa, Nawras H. and Zahari, Nur Ismarrubie and Mohd. Sapuan Salit, Mohd. Sapuan and Hameed Sultan, Mohamed Thariq (2016) Effect of equi-biaxially fabric prestressing on the tensile performance of woven E-glass/polyester reinforced composites. Journal of Reinforced Plastics and Composites, 35 (14). pp. 1093-1103. ISSN 0731-6844; ESSN: 1530-7964

Haider, Nawras Haidar Mostafa Meir Al-Said and Zahari, Nur Ismarrubie and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq (2016) Effect of fabric biaxial prestress on the fatigue of woven E-glass/polyester composites. Materials & Design, 92. pp. 579-589. ISSN 0264-1275; ESSN: 1873-4197

Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Mohamed Ariff, Azmah Hanim (2016) Effects of Kenaf Fiber Orientation on Mechanical Properties and fatigue Life of Glass/Kenaf Hybrid Composites. BioResources, 11 (1). pp. 1448-1465. ISSN 1930-2126

Sharba, Mohaiman Jaffar and Salman, Suhad Dawood and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Mohamed Ariff, Azmah Hanim (2016) Effects of processing method, moisture content, and resin system on physical and mechanical properties of woven kenaf plant fiber composites. BioResources, 11 (1). pp. 1466-1476. ISSN 1930-2126

Salman, Suhad Dawood and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Cardona, Francisco (2016) Influence of fiber content on mechanical and morphological properties of woven kenaf reinforced PVB film produced using a hot press technique. International Journal of Polymer Science, 2016. art. no. 7828451. pp. 1-11. ISSN 1687-9422; ESSN: 1687-9430

Cardona, Francisco and Hameed Sultan, Mohamed Thariq and Abu Talib, Abd. Rahim and Farah Ezzah and Derahman, Aishah (2016) Interpenetrating polymer network (IPN) with epoxidized and acrylated bioresins and their composites with glass and jute fibres. BioResources, 11 (1). pp. 2820-2838. ISSN 1930-2126

Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Mohamed Ariff, Azmah Hanim (2016) Partial replacement of glass fiber by woven kenaf in hybrid composites and its effect on monotonic and fatigue properties. Bioresources, 11 (1). pp. 2665-2883. ISSN 1930-2126

Salman, Suhad Dawood and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Cardona, Francisco (2016) The effect of stacking sequence on tensile properties of hybrid composite materials. Malaysian Journal of Civil Engineering, 28 (spec.1). pp. 10-17. ISSN 1823-7843

Salman, Suhad D. and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Cardona, Francisco (2016) The effects of orientation on the mechanical and morphological properties of woven kenaf-reinforced poly vinyl butyral film. BioResources, 11 (1). pp. 1176-1188. ISSN 1930-2126

Salman, Suhad D. and Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Cardona, Francisco (2015) Physical, mechanical, and morphological properties of woven kenaf/polymer composites produced using a vacuum infusion technique. International Journal of Polymer Science, 2015. art. no. 894565. pp. 1-11. ISSN 1687-9422; ESSN: 1687-9430

Khajeh, Amin and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Banhegyi, Gyorgy and Karacsony, Zsuzsanna and Baranyai, Viktor (2015) The effect of thermo-oxidative aging on the durability of glass fiber-reinforced epoxy. Advances in Materials Science and Engineering, 2015. art. no. 372354. pp. 1-13. ISSN 1687-8434; ESSN: 1687-8442

Zakikhani, Parnia and Zahari, Rizal and Hameed Sultan, Mohamed Thariq and Abang Abdul Majid, Dayang Laila (2014) Extraction and preparation of bamboo fibre-reinforced composites. Materials and Design, 63. pp. 820-828. ISSN 0264-1275; ESSN: 1873-4197

Safri, Syafiqah Nur Azrie and Chan, Teng Yan and Hameed Sultan, Mohamed Thariq (2014) An experimental study of low velocity impact (LVI) on fibre glass reinforced polymer (FGRP). The International Journal of Engineering and Science, 3 (8). pp. 1-10. ISSN 2319–1805; ESSN: 2319-1813

Razali, Noorshazlin and Hameed Sultan, Mohamed Thariq (2014) A novel approach for detecting, localising and characterising damages in glass fibre reinforced polymer (GFRP) using the drop weight impact tester. International Journal of Research in Engineering and Technology, 3 (8). pp. 295-306. ISSN 2321-7308; ESSN: 2319-1163

Safri, Syafiqah Nur Azrie and Hameed Sultan, Mohamed Thariq and Razali, Noorshazlin and Basri, Shahnor and Yidris, Noorfaizal and Mustapha, Faizal (2014) The effect of layers and bullet type on impact properties of Glass Fibre Reinforced Polymer (GFRP) using a Single Stage Gas Gun (SSGG). Applied Mechanics and Materials, 564. pp. 428-433. ISSN 1660-9336; ESSN: 1662-7482

Lim, Keng Teek and Zahari, Rizal and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq (2014) Experimental assessment of collapse behavior and energy absorption of composite and hybrid composite square tube subjected to oblique loads. The International Journal of Engineering and Science, 3 (3). pp. 13-29. ISSN 2319–1805; ESSN: 2319–1813

Muda, Mohd Khairul Hafiz and Mustapha, Faizal and Mohd Aris, Khairul Dahri and Hameed Sultan, Mohamed Thariq (2014) Fabrication technique for bio-composite patch repair on laminated structures of CFRP plate. Applied Mechanics and Materials, 564. pp. 366-371. ISSN 1660-9336; ESSN: 1662-7482

Razali, Noorshazlin and Hameed Sultan, Mohamed Thariq and Safri, Syafiqah Nur Azrie and Basri, Shahnor and Yidris, Noorfaizal and Mustapha, Faizal (2014) High velocity impact test on glass fibre reinforced polymer (GFRP) using a single stage gas gun (SSGG) - an experimental based approach. Applied Mechanics and Materials, 564. pp. 376-381. ISSN 1660-9336; ESSN: 1662-7482

Safri, Syafiqah Nur Azrie and Hameed Sultan, Mohamed Thariq and Aminanda, Yulfian (2014) Impact characterisation of glass fibre reinforced polymer (GFRP) type C-600 and E-800 using a drop weight machine. Applied Mechanics and Materials, 629. pp. 461-466. ISSN 1660-9336; ESSN: 1662-7482

Hameed Sultan, Mohamed Thariq and Basri, Shah Nor and Mohd Rafie, Azmin Shakrine and Yidris, Noorfaizal and Mustapha, Faizal and Zahari, Rizal and Mohd Ajir, Mohd Ramly (2014) Impact damage analysis for glass reinforced epoxy laminated plates using single stage gas gun. Applied Mechanics and Materials, 564. pp. 382-387. ISSN 1660-9336; ESSN: 1662-7482

Razali, N. and Hameed Sultan, Mohamed Thariq and Mustapha, Faizal and Yidris, Noorfaizal and Ishak, Mohamad Ridzwan (2014) Impact damage on composite structures – a review. The International Journal of Engineering and Science, 3 (7). pp. 8-20. ISSN 2319-1805; ESSN: 2319-1813

Yidris, Noorfaizal and Hameed Sultan, Mohamed Thariq and Harmin, Mohammad Yazdi and Mohd Rafie, Azmin Shakrine (2014) Local-overall flexural interaction of pinned-ended thin-walled I-section columns. Applied Mechanics and Materials, 564. pp. 444-448. ISSN 1660-9336; ESSN: 1662-7482

Safri, Syafiqah Nur Azrie and Hameed Sultan, Mohamed Thariq and Yidris, Noorfaizal and Mustapha, Faizal (2014) Low velocity and high velocity impact test on composite materials - a review. The International Journal of Engineering and Science, 3 (9). pp. 50-60. ISSN 2319–1805; ESSN: 2319–1813

Mohd Jamal, Qistina and Abang Abdul Majid, Dayang Laila and Mohd Haris, Mohd Yusoff and Yidris, Noorfaizal and Hameed Sultan, Mohamed Thariq (2014) Quasi static analysis of a biocomposite aircraft radome. Applied Mechanics and Materials, 629. pp. 78-81. ISSN 1660-9336; ESSN: 1662-7482

Zakikhani, Parnia and Zahari, Rizal and Hameed Sultan, Mohamed Thariq (2014) Simulation of low velocity impact on composite hemispherical shell. Applied Mechanics and Materials, 564. pp. 406-411. ISSN 1660-9336; ESSN: 1662-7482

Safri, Syafiqah Nur Azrie and Chan, Teng Yan and Hameed Sultan, Mohamed Thariq (2014) A novel method for detecting and characterizing low velocity impact (LVI) in commercial composite. International Journal of Research in Engineering and Technology, 3 (8). pp. 101-106. ISSN 2321-7308; ESSN: 2319-1163

Hamdan, Ahmad and Mustapha, Faizal and Ahmad, Kamarul Arifin and Mohd Rafie, Azmin Shakrine and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan (2014) A review on the self energize structural health monitoring (SHM) in vertical axis wind turbine (VAWT) system. Applied Mechanics and Materials, 564. pp. 157-163. ISSN 1660-9336; ESSN: 1662-7482

Razali, Noorshazlin and Hameed Sultan, Mohamed Thariq and Aminanda, Yulfian (2014) The study of impact behaviour of two types of glass fibre reinforced polymer (GFRP) subjected to low velocity impact. Advanced Materials Research, 1044-1045. pp. 153-157. ISSN 1022-6680; ESSN: 1662-8985

Hameed Sultan, Mohamed Thariq and Mohd Rafie, Azmin Shakrine and Yidris, Noorfaizal and Mustapha, Faizal and Zahari, Rizal (2013) Damage classification in CFRP laminates using the NDT/E approach. NDT Spectra (7). pp. 217-224. ISSN 2231-9891

Zahari, Rizal and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Mohd Rafie, Azmin Shakrine and Hameed Sultan, Mohamed Thariq (2012) Geometric non-linear analysis of composite laminated plates using higher order finite strip element. Applied Mechanics and Materials, 225. pp. 165-171. ISSN 1660-9336; ESSN: 1662-7482

Hameed Sultan, Mohamed Thariq and Basri, Shahnor and Mohd Rafie, Azmin Shakrine and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Mohd Ajir, Mohd Ramly (2012) High velocity impact damage analysis for glass epoxy - laminated plates. Advanced Materials Research, 399-401. pp. 2318-2328. ISSN 1022-6680; ESSN: 1662-8985

Hameed Sultan, Mohamed Thariq and Worden, K. and Pierce, S. G. and Hickey, D. and Staszewski, W. J. and Dulieu-Barton, J. M. and Hodzic, A. (2011) On Impact Damage Detection and Quantification for CFRP Laminates using Structural Response Data Only. Mechanical Systems and Signal Processing, 25 (8). pp. 3135-3152. ISSN 0888-3270

Yidris, Noorfaizal and Zahari, Rizal and Abang Abdul Majid, Dayang Laila and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Mohd Rafie, Azmin Shakrine (2010) Crush simulation of woven c-glass/epoxy unmanned ariel vehicle fuselage section. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 260-267. ISSN 1823-0334

Abd Rahman, Azmawani and Mohd Zain, Mohd Izani and Hameed Sultan, Mohamed Thariq (2020) Legasi Ihsan. Penerbit Universiti Putra Malaysia, Serdang, Selangor. ISBN 9789672395669

Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq (2019) Fatigue life prediction of textile/woven hybrid composites. In: Durability and Life Prediction in Biocomposites, Fibre- Reinforced Composites and Hybrid Composites. Woodhead Publishing Series in Composites Science and Engineering . Woodhead Publishing, United Kingdom, 63 - 82. ISBN 9780081022900

Mohd Nor, Ariff Farhan and Hameed Sultan, Mohamed Thariq and Ariffin, Ahmad Hamdan (2017) Design and development of a food tray table for commercial aircraft using hybrid composites. In: 4th Mechanical Engineering Research Day 2017 (MERD'17), 30 Mar. 2017, UTeM Library, Melaka. (pp. 389-390).

Rayney Azmi, Ahmad Mustafa and Hameed Sultan, Mohamed Thariq and Ariffin, Ahmad Hamdan (2017) Design and development of bulletproof vest using kenaf fibre embedded with x-ray films. In: 4th Mechanical Engineering Research Day 2017 (MERD'17), 30 Mar. 2017, UTeM Library, Melaka. (pp. 370-371).

Mat Yazik, Muhamad Hasfanizam and Hameed Sultan, Mohamed Thariq and Ariffin, Ahmad Hamdan (2017) Wing design for blended-wing-body aircraft. In: 4th Mechanical Engineering Research Day 2017 (MERD'17), 30 Mar. 2017, UTeM Library, Melaka. (pp. 142-143).

Abu Bakar, Norrahim and Azni, Mohd Edyazuan and Hameed Sultan, Mohamed Thariq and Ariffin, Ahmad Hamdan (2017) A techno-economical study on medium density fiberboard using napier grass fiber as ceiling board. In: 4th Mechanical Engineering Research Day 2017 (MERD'17), 30 Mar. 2017, UTeM Library, Melaka. (pp. 399-400).

Salman, Suhad D. and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Cardona, Francisco (2015) Influence of resin system on the energy absorption capability and morphological properties of plain woven kenaf composites. In: 3rd International Conference of Mechanical Engineering Research (ICMER 2015), 18–19 Aug. 2015, Zenith Hotel, Kuantan, Pahang. (pp. 1-8).

Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan and Mohamed Ariff, Azmah Hanim (2015) Monotonic and fatigue properties of kenaf /glass hybrid composites under fully reversed cyclic loading. In: 3rd International Conference of Mechanical Engineering Research (ICMER 2015), 18–19 Aug. 2015, Zenith Hotel, Kuantan, Pahang. (pp. 1-8).

Annuar, Ahsan Nur Mubarak and Mohd Rafie, Azmin Shakrine and Hameed Sultan, Mohamed Thariq (2013) The study of blockages effect at leading edge on rectangular cavity in subsonic flow using particle image velocimetry (PIV). In: 2nd International Conference on Mechatronics and Applied Mechanics, ICMAM 2012, 8-9 Dec. 2012, Taipei. (pp. 781-784).

Cheong, X.H. and Mohd Rafie, Azmin Shakrine and Romli , Fairuz Izzuddin and Hameed Sultan, Mohamed Thariq and Yidris, Noorfaizal (2012) A study on the effect of upstream square blockage of a rotating cylinder. In: AEROTECH IV, 21-22 Nov. 2012, Kuala Lumpur. (pp. 13-17).

Hameed Sultan, Mohamed Thariq and Barthorpe, Robert and Worden, Keith and Eaton, Mark and Pullin, Rhys and Holford, Karen The effect of attenuation on the identification of impact damage in CFRP laminates. In: 6th European Workshop on Structural Health Monitoring, 3-6 Jul 2012, Dresden, Germany. (pp. 1-9).

Hameed Sultan, Mohamed Thariq (2007) High Velocity Impact Analysis Of Glass Epoxy-Laminated Plates. Masters thesis, Universiti Putra Malaysia.