Browse by Journal Title

Abu Talib, Abd. Rahim and Ramadhan, A. A. and Mohd Rafie, Azmin Shakrine and Zahari, Rizal (2013) Influence of cut-out hole on multi-layer Kevlar-29/epoxy composite laminated plates. Materials & Design, 43. pp. 89-98. ISSN 0261-3069

A. Bakar, Balkis Fatomer and Hiziroglu, Salim and Md. Tahir, Paridah (2013) Properties of some thermally modified wood species. Materials & Design, 43. pp. 348-355. ISSN 0264-1275; ESSN: 1873-4197

Aljibori, Hakim S. Sultan and Chong, W. P. and Mahlia, Teuku Meurah Indra and Chong, Wen Tong and Edi, Prasetyo and Al-Qrimli, Haidar and Anjum, Irfan and Zahari, Rizal (2010) Load-displacement behavior of glass fiber/epoxy composite plates with circular cut-outs subjected to compressive load. Materials & Design, 31 (1). pp. 466-474. ISSN 0261-3069

Bahraminasab, Marjan and Sahari, Barkawi and Edwards, Kevin L. and Farahmand, Farzam and Tang, Sai Hong and Naghibi, Hamid (2013) Material tailoring of the femoral component in a total knee replacement to reduce the problem of aseptic loosening. Materials & Design, 52. pp. 441-451. ISSN 0261-3069

Bahraminasab, Marjan and Sahari, Barkawi and Edwards, Kevin L. and Farahmand, Farzam and Arumugam, Manohar (2013) Aseptic loosening of femoral components - materials engineering and design considerations. Materials & Design, 44. pp. 155-163. ISSN 0261-3069

El-Shekeil, Yousuf Ali and Salit, Mohd Sapuan and Algrafi, Mubarak W. (2014) Effect of fiber loading on mechanical and morphological properties of cocoa pod husk fibres reinforced thermoplastic polyurethane composites. Materials & Design, 64. pp. 330-333. ISSN 0261-3069

El-Shekeil, Yousuf Ali Gumaan and Salit, Mohd Sapuan and Jawaid, Mohammad and Al-Shuja'a, Omar Mohammed (2014) Influence of fiber content on mechanical, morphological and thermal properties of kenaf fibers reinforced poly(vinyl chloride)/thermoplastic polyurethane poly-blend composites. Materials & Design, 58. pp. 130-135. ISSN 0264-1275; ESSN: 1873-4197

Haider, Nawras Haidar Mostafa Meir Al-Said and Zahari, Nur Ismarrubie and Salit, Mohd Sapuan and Hameed Sultan, Mohamed Thariq (2016) Effect of fabric biaxial prestress on the fatigue of woven E-glass/polyester composites. Materials & Design, 92. pp. 579-589. ISSN 0264-1275; ESSN: 1873-4197

Hoque, M. Enamul and Aminudin, M. A. M. and Jawaid, Mohammad and Islam, Md. Saiful and Md. Tahir, Paridah (2014) Physical, mechanical, and biodegradable properties of meranti wood polymer composites. Materials & Design, 64. pp. 743-749. ISSN 0264-1275; ESSN: 1873-4197

Jahan, Ali and Ismail, Md. Yusof and Mustapha, Faizal and Salit, Mohd Sapuan (2010) Material selection based on ordinal data. Materials & Design, 31 (7). pp. 3180-3187. ISSN 0261-3069

Md Deros, Mohd. Azaman and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Zainudin, Edi Syams and Abdan, Khalina (2013) Shrinkages and warpage in the processability of wood-filled polypropylene composite thin-walled parts formed by injection molding. Materials & Design, 52. pp. 1018-1026. ISSN 0261-3069

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Ahmad, Desa and Ali, Aidy and Abdan, Khalina and Jonoobi, Mehdi (2011) Concept selection of car bumper beam with developed hybrid bio-composite material. Materials & Design, 32 (10). pp. 4857-4865. ISSN 0261-3069

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Ahmad, Desa and Ali, Aidy and Abdan, Khalina and Mehdi, Janoobi (2010) Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam. Materials & Design, 31 (10). pp. 4927-4932. ISSN 0264-1275; ESSN: 1873-4197

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Yunus, Robiah (2008) Conceptual design of a polymer composite automotive bumper energy absorber. Materials & Design, 29 (7). pp. 1447-1452. ISSN 0264-1275; ESSN: 1873-4197

Ramadhan, A. A. and Abu Talib, Abd. Rahim and Mohd Rafie, Azmin Shakrine and Zahari, Rizal (2013) High velocity impact response of Kevlar-29/epoxy and 6061-T6 aluminum laminated panels. Materials & Design, 43. pp. 307-321. ISSN 0261-3069

Yeoh, Beng Hoong and Md. Tahir, Paridah (2013) Development a new method for pilot scale production of high grade oil palm plywood: effect of hot-pressing time. Materials & Design, 45. pp. 142-147. ISSN 0264-1275; ESSN: 1873-4197