Browse by Journal Title

Abdul Kadir, Khairul Anwar and Nazmi, Nurhazimah and Mohamad, Norzilawati and Shabdin, Muhammad Kashfi and Adiputra, Dimas and Mazlan, Saiful Amri and Nordin, Nur Azmah and Mohd Yusuf, Shahir and Ubaidillah (2022) Effect of magnetorheological grease’s viscosity to the torque performance in magnetorheological brake. Materials, 15 (16). art. no. 5717. pp. 1-19. ISSN 1996-1944

Ashrafi, Negin and Mohamed Ariff, Azmah Hanim and Jung, Dong Won and Sarraf, Masoud and Foroughi, Javad and Sulaiman, Shamsuddin and Hong, Tang Sai (2022) Magnetic, electrical, and physical properties evolution in Fe3O4 nanofiller reinforced aluminium matrix composite produced by powder metallurgy method. Materials, 15 (12). art. no. 4153. pp. 1-22. ISSN 1996-1944

Arumugam, Soundhar and Kandasamy, Jayakrishna and Venkatesan, Subramani and Murugan, Rajesh and Narayanan, Valayapathy Lakshmi and Hameed Sultan, Mohamed Thariq and Shahar, Farah Syazwani and Md Shah, Ain Umaira and Khan, Tabrej and Sebaey, Tamer Ali (2022) A review on the effect of fabric reinforcement on strength enhancement of natural fiber composites. Materials, 15 (9). art. no. 3025. pp. 1-33. ISSN 1996-1944

Abd Rahman, Muhammad Syahmi and Ab Kadir, Mohd Zainal Abidin and Abd Rahman, Muhamad Safwan and Osman, Miszaina and Ungku Amirulddin, Ungku Anisa and Mohd Nor, Shamsul Fahmi and Mohd Zainuddin, Noorlina (2021) The behavior of polyurethane foam-filled glass-fiber-reinforced polymer crossarm subjected to lightning transient voltage. Materials, 14 (19). pp. 1-12. ISSN 1996-1944

Akomolafe, Oluwatobi and Owolabi, Taoreed O. and Abd Rahman, Mohd Amiruddin and Awang Kechik, Mohd Mustafa and Mohd Yasin, Mohd Najib and Souiyah, Miloud (2021) Modeling superconducting critical temperature of 122-iron-based pnictide intermetallic superconductor using a hybrid intelligent computational method. Materials, 14 (16). art. no. 4604. pp. 1-14. ISSN 1996-1944

Anuar, Muhammad Fahmi and Yap, Wing Fen and Azizan, Muhammad Zakwan and Rahmat, Fida’i and Mohd Zaid, Mohd Hafiz and Mohamed Khaidir, Rahayu Emilia and Sheh Omar, Nur Alia (2021) Sustainable production of arecanut husk ash as potential silica replacement for synthesis of silicate-based glass-ceramics materials. Materials, 14 (5). art. no. 1141. pp. 1-12. ISSN 1996-1944

Abu Talib, Anis Adilah and Jumahat, Aidah and Jawaid, Mohammad and Sapiai, Napisah and Leao, Alcides Lopes (2021) Effect of wear conditions, parameters and sliding motions on tribological characteristics of basalt and glass fibre reinforced epoxy composites. Materials, 14 (3). art. no. 701. pp. 1-18. ISSN 1996-1944

Abd Rahman, Farah Asyikin and Ab Kadir, Mohd Zainal Abidin and Ungku Amirulddin Al Amin, Ungku Anisa and Osman, Miszaina (2021) Electrical performance of polymer-insulated rail brackets of DC transit subjected to lightning induced overvoltage. Materials, 14 (7). pp. 1-17. ISSN 1996-1944

Ahmad, Junaid and Rashid, Umer and Patuzzi, Francesco and Alamoodi, Nahla and Choong, Thomas Shean Yaw and Soltani, Soroush and Ngamcharussrivichai, Chawalit and Nehdi, Imededdine Arbi and Baratieri, Marco (2020) Mesoporous acidic catalysts synthesis from dual stage and rising co-current gasification char: application for FAME production from waste cooking oil. Materials, 13 (4). pp. 1-10. ISSN 1996-1944

Abdul Wahab, Rabiatul Adawiyah and Mohd Zaid, Mohd Hafiz and Ab Aziz, Sidek and Matori, Khamirul Amin and Yap, Wing Fen and Yaakob, Yazid (2020) Effects of sintering temperature variation on synthesis of glass-ceramic phosphor using rice husk ash as silica source. Materials, 13 (23). pp. 1-14. ISSN 1996-1944

Ahmad, Junaid and Rashid, Umer and Patuzzi, Francesco and Alamoodi, Nahla and Choong, Thomas Shean Yaw and Soltani, Soroush and Ngamcharussrivichai, Chawalit and Nehdi, Imededdine Arbi and Baratieri, Marco (2020) Mesoporous acidic catalysts synthesis from dual-stage and rising co-current gasification char: application for FAME production from waste cooking oil. Materials, 13 (4). art. no. 871. pp. 1-10. ISSN 1996-1944

Anuar, Muhammad Fahmi and Fen, Yap Wing and Mohd Zaid, Mohd Hafiz and Sheh Omar, Nur Alia and Mohamed Khaidir, Rahayu Emilia (2020) Sintering temperature effect on structural and optical Properties of heat treated coconut husk ash derived SiO2 mixed with ZnO nanoparticles. Materials, 13 (11). art. no. 2555. pp. 1-10. ISSN 1996-1944

Abed, Alaaeddin M. H. and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and E. S., Zainudin and Al-Oqla, Faris M. (2019) Lightweight and durable PVDF-SSPF composites for photovoltaics backsheet applications: thermal, optical and technical properties. Materials, 12 (13). art. no. 2104. pp. 1-19. ISSN 1996-1944

Adeyi, Abel Adekanmi and Md. Jamil, Siti Nurul Ain and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Lau, Kia Li and Abdullah, Mohammad (2019) Adsorptive removal of methylene blue from aquatic environments using thiourea-modified poly(acrylonitrile-co-acrylic acid). Materials, 12 (11). art. no. 1734. pp. 1-17. ISSN 1996-1944

Al Balawi, Aisha Nawaf and Yusof, Nor Azah and Kamaruzaman, Sazlinda and Mohammad, Faruq and Wasoh @ Mohamad Isa, Helmi and Al-Lohedan, Hamad A. (2019) DNA adsorption studies of poly (4,4′-cychlohexylidene bisphenol oxalate)/silica nanocomposites. Materials, 12 (7). pp. 1-15. ISSN 1996-1944

Al Balawi, Aisha Nawaf and Yusof, Nor Azah and Kamaruzaman, Sazlinda and Mohammad, Faruq and Wasoh @ Mohamad Isa, Helmi and Al-Lohedan, Hamad A. (2019) DNA adsorption studies of poly(4,4'-cychlohexylidene bisphenol oxalate)/silica nanocomposites. Materials, 12 (7). art. no. 1178. pp. 1-15. ISSN 1996-1944

Abed, Alaaeddin M. H. and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams and Al-Oqla, Faris M. (2019) Development of photovoltaic module with fabricated and evaluated novel backsheet-based biocomposite materials. Materials, 12 (18). art. no. 3007. pp. 1-15. ISSN 1996-1944

Ahmad Saffian, Harmaen and Kim, Hyun Joong and Md. Tahir, Paridah and Ibrahim, Nor Azowa and Lee, Seng Hua and Lee, Ching Hao (2019) Effect of lignin modification on properties of kenaf core fiber reinforced poly(butylene succinate) biocomposites. Materials, 12 (24). art. no. 4043. pp. 1-10. ISSN 1996-1944

Alshammari, Basheer A. and Saba, Naheed and Alotaibi, Majed D. and Alotibi, Mohammed F. and Jawaid, Mohammad and Alothman, Othman Y. (2019) Evaluation of mechanical, physical, and morphological properties of epoxy composites reinforced with different date palm fillers. Materials, 12 (13). art. no. 2145. pp. 1-17. ISSN 1996-1944

Abed, Alaaeddin M. H. and Salit, Mohd Sapuan and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams and Al-Oqla, Faris M. (2019) Lightweight and durable PVDF–SSPF composites for photovoltaics backsheet applications: thermal, optical and technical properties. Materials, 12 (13). art. no. 2104. pp. 1-19. ISSN 1996-1944

Adeyi, Abel Adekanmi and Md. Jamil, Siti Nurul Ain and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Lau, Kia Li and Abdullah, Mohammad (2019) Simultaneous adsorption of cationic dyes from binary solutions by thiourea-modified poly(acrylonitrile-co-acrylic acid): detailed isotherm and kinetic studies. Materials, 12 (18). art. no. 2903. pp. 1-20. ISSN 1996-1944

Azis, Raba’ah Syahidah and Che Muda, Nor Nadhirah and Hassan, Jumiah and Shaari, Abdul Halim and Ibrahim, Idza Riati and Mustaffa, Muhammad Syazwan and Sulaiman, Sakinah and Matori, Khamirul Amin and Yap, Wing Fen (2018) Effect of ratio in ammonium nitrate on structural, microstructural, magnetic and AC conductivity properties of BaFe12O19. Materials, 11 (11). pp. 1-22. ISSN 1996-1944; ESSN: 1996-1944

Abdul Rahim, Zulaiha and Yusof, Nor Azah and Mohammad Haniff, Muhammad Aniq Shazni and Mohammad, Faruq and Syono, Mohd Ismahadi and Daud, Nurulhaidah (2018) Electrochemical measurements of multiwalled carbon nanotubes under different plasma treatments. Materials, 11 (10). pp. 1-11. ISSN 1996-1944

Azizi, Susan and Namvar, Farideh and Mahdavi, Mahnaz and Ahmad @ Ayob, Mansor and Mohamad, Rosfarizan (2013) Biosynthesis of silver nanoparticles using brown marine macroalga, Sargassum muticum aqueous extract. Materials, 6 (12). pp. 5942-5950. ISSN 1996-1944

Abd. Aziz, Sidek and Shaharuddin, Rosmawati and Mohamed Kamari, Halimah and Matori, Khamirul Amin and Talib, Zainal Abidin (2012) Effect of AlF3 on the density and elastic properties of zinc tellurite glass systems. Materials, 5 (8). pp. 1361-1372. ISSN 1996-1944

Buskaran, Kalaivani and Bullo, Saifullah and Hussein, Mohd Zobir and Masarudin, Mas Jaffri and Mohd Moklas, Mohamad Aris and Fakurazi, Sharida (2021) Anticancer molecular mechanism of protocatechuic acid loaded on folate coated functionalized graphene oxide nanocomposite delivery system in human hepatocellular carcinoma. Materials, 14 (4). pp. 1-26. ISSN 1996-1944

Basri, Ernnie Illyani and Hameed Sultan, Mohamed Thariq and Basri, Adi Azriff and Mustapha, Faizal (2021) Consideration of lamination structural analysis in a multi-layered composite and failure analysis on wing design application. Materials, 14 (13). art. no. 3705. pp. 1-10. ISSN 1996-1944

Chakrawarthi, Vijayaprabha and Dharmar, Brindha and Avudaiappan, Siva and Amran, Mugahed and Flores, Erick Saavedra and Alam, Mohammad Ayaz and Fediuk, Roman and Vatin, Nikolai Ivanovicn and M. Rashid, Raizal S. (2022) Destructive and non-destructive testing of the performance of copper slag fiber-reinforced concrete. Materials, 15 (13). art. no. 4536. pp. 1-24. ISSN 1996-1944

Che Bakar, Mohd Basri and Muhammad Rashid, Raizal Saifulnaz and Amran, Mugahed and Jaafar, Mohd Saleh and Vatin, Nikolai Ivanovicn and Fediuk, Roman (2022) Flexural strength of concrete beam reinforced with CFRP bars: a review. Materials, 15 (3). art. no. 1144. pp. 1-21. ISSN 1996-1944

Choo, Thye Foo and Mohd Salleh, Mohamad Amran and Kuan, Ying Kok and Matori, Khamirul Amin and Abdul Rashid, Suraya (2020) A study on the utilization of coal fly ash derived Grog in clay ceramics. Materials, 13 (22). pp. 1-12. ISSN 1996-1944

Elmahaishi, Madiha Fathi and Azis, Raba’ah Syahidah and Ismail, Ismayadi and Mustaffa, Muhammad Syazwan and Abbas, Zulkifly and Matori, Khamirul Amin and Muhammad, Farah Diana and Saat, Nor Kamilah and Nazlan, Rodziah and Ibrahim, Idza Riati and Abdullah, Nor Hapishah and Mokhtar, Nurhidayaty (2021) Structural, electromagnetic and microwave properties of magnetite extracted from mill scales via conventional ball milling and mechanical alloying techniques. Materials, 14 (22). art. no. 7075. pp. 1-25. ISSN 1996-1944

Ebshish, Ali and Yaakob, Zahira and Yap, Taufiq Yun Hin and Bshish, Ahmed (2014) Investigation of the process conditions for hydrogen production by steam reforming of glycerol over Ni/Al2O3 catalyst using response surface methodology (RSM). Materials, 7 (3). pp. 2257-2272. ISSN 1996-1944

Farade, Rizwan A. and Abdul Wahab, Noor Izzri and Mansour, Diaa-Eldin A. and Azis, Norhafiz and Jasni, Jasronita and Soudagar, Manzoore Elahi M. and Siddappa, Vasudevamurthy (2020) Development of graphene oxide-based nonedible cottonseed nanofluids for power transformers. Materials, 13 (11). art. no. 2569. pp. 1-16. ISSN 1996-1944

Hachaichi, Amina and Kouini, Benalia and Lau, Kia Kian and Asim, Mohammad and Fouad, Hassan and Jawaid, Mohammad and Sain, Mohini (2021) Nanocrystalline cellulose from microcrystalline cellulose of date palm fibers as a promising candidate for bio-nanocomposites: isolation and characterization. Materials, 14 (18). art. no. 5313. pp. 1-13. ISSN 1996-1944

Ismail, Asmawi and Othman, Nurul Husna and Mustapha, Mazli and Mohamed Saheed, Mohamed Shuaib and Abdullah, Zaki and Muhammed, Musa and Mohamed Saat, Asmalina and Mustapha, Faizal (2022) Mechanical performance and corrosion behaviour of diffusion-bonded A5083 aluminium and A36 mild steel with gallium interlayer. Materials, 15 (18). art. no. 6331. pp. 1-22. ISSN 1996-1944

Ismail, Rifky and Cionita, Tezara and Wong, Ling Shing and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Bayuseno, Athanasius Priharyoto and Nugraha, Fariz Wisda and Muhamadin, Rilo Chandra and Junid, Ramli and Endot, Nor Azam (2022) Synthesis and characterization of calcium carbonate obtained from green mussel and crab shells as a biomaterials candidate. Materials, 15 (16). art. no. 5712. pp. 1-14. ISSN 1996-1944

Ismail, Suhainie and Yusof, Nor Azah and Abdullah, Jaafar and Abd Rahman, Siti Fatimah (2020) Electrochemical detection of arsenite using a silica nanoparticles- modified screen-printed carbon electrode. Materials, 13 (14). art. no. 3168. pp. 1-16. ISSN 1996-1944

Ismail, Ahmad Safwan and Jawaid, Mohammad and Naveen, Jesuarockiam (2019) Void content, tensile, vibration and acoustic properties of kenaf/bamboo fiber reinforced epoxy hybrid composites. Materials, 12 (13). art. no. 2094. pp. 1-14. ISSN 1996-1944

Jamaludin, Norhanisah and Tan, Tong Ling and Kamarol Zaman, Alif Syafiq and Sadrolhosseini, Amir Reza and Abdul Rashid, Suraya (2020) Acid-free hydrothermal-extraction and molecular structure of carbon quantum dots derived from empty fruit bunch biochar. Materials, 13 (15). art. no. 3356. pp. 1-23. ISSN 1996-1944

Jesuarockiam, Naveen and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan (2019) Improved mechanical and moisture resistant properties of woven hybrid epoxy composites by graphene nanoplatelets (GNP). Materials, 12 (8). art. no. 1249. pp. 1-18. ISSN 1996-1944

Kamarul Bahrain, Siti Humairah and Nik Masdek, Nik Rozlin and Mahmud, Jamaluddin and Mohammed, M. N. and Salit, Mohd Sapuan and Ilyas, R. A. and Mohamed, Abdullah and Shamseldin, Mohamed A. and Abdelrahman, Anas and Asyraf, M. R. M. (2022) Morphological, physical, and mechanical properties of sugar-palm (Arenga pinnata (Wurmb)Merr.)- reinforced silicone rubber biocomposites. Materials, 15 (12). art. no. 4062. pp. 1-16. ISSN 1996-1944

Kirmasha, Yasir Khaleel and Sharba, Mohaiman Jaffar and Leman, Zulkiflle and Hameed Sultan, Mohamed Thariq (2020) Mechanical performance of unstitched and silk fiber-stitched woven kenaf fiber reinforced epoxy composites. Materials, 13 (21). pp. 1-14. ISSN 1996-1944

Kamaruddin, Fatin Amirah and Vivi Anggraini and Huat, Bujang Kim and Nahazanan, Haslinda (2020) Wetting/drying behaviour of lime and alkaline activation stabilized marine clay reinforced with modified coir fibre. Materials, 13 (12). art. no. 2753. pp. 1-10. ISSN 1996-1944

Khan, Muhammad Jamshed and Kumari, Suriya and Shameli, Kamyar and Selamat, Jinap and Sazili, Awis Qurni (2019) Green synthesis and characterization of Pullulan mediated Silver nanoparticles through ultraviolet (UV) virradiation. Materials, 12 (15). pp. 1-12. ISSN 1996-1944

Khan, Muhammad Jamshed and Ramiah, Suriya Kumari and Shameli, Kamyar and Selamat, Jinap and Sazili, Awis Qurni (2019) Green synthesis and characterization of pullulan mediated silver nanoparticles through ultraviolet irradiation. Materials, 12 (15). art. no. 2382. pp. 1-12. ISSN 1996-1944

Laosena, Rattikal and Palamanit, Arkom and Luengchavanon, Montri and Kittijaruwattana, Jitralada and Nakason, Charoen and Lee, Seng Hua and Chotikhun, Aujchariya (2022) Characterization of mixed pellets made from rubberwood (Hevea brasiliensis) and refuse-derived fuel (RDF) waste as pellet fuel. Materials, 15 (9). art. no. 3093. pp. 1-11. ISSN 1996-1944

Lalegani Dezaki, Mohammadreza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Mohd Idris Shah (2020) Effects of CNC machining on surface roughness in Fused Deposition Modelling (FDM) products. Materials, 13 (11). pp. 1-28. ISSN 1996-1944

Lee, Han Kee and Talib, Zainal Abidin and Mamat @ Mat Nazir, Md Shuhazlly and Wang, Enze and Lim, Hong Ngee and Mahdi, Mohd Adzir and Ng, Eng Khoon and Mohd Yusoff, Norita and Al-Jumaili, Batool Eneaze and Liew, Josephine Ying Chyi (2019) Effect of sodium hydroxide concentration in synthesizing zinc selenide/graphene oxide composite via microwave-assisted hydrothermal method. Materials, 12 (14). art. no. 2295. pp. 1-10. ISSN 1996-1944

Lokman, Muhammad Quisar and Shafie, Suhaidi and Shaban, Suraya and Ahmad, Fauzan and Jaafar, Haslina and Mohd Rosnan, Rizuan and Yahaya, Hafizal and Abdullah, Shahrum Shah (2019) Enhancing photocurrent performance based on photoanode thickness and surface plasmon resonance using Ag-TiO2 nanocomposites in dye-sensitized solar cells. Materials, 12 (13). art. no. 2111. pp. 1-14. ISSN 1996-1944

Mohammed Sabbar, Huda and Leman, Zulkiflle and Shamsudin, Shazarel and Mohd Tahir, Suraya and Jaafar, Che Nor Aiza and Mohamed Ariff, Azmah Hanim and Zahari, Nur Ismarrubie and Rady, Mohammed H. (2021) The effect of solid-State processes and heat treatment on the properties of AA7075 aluminum waste recycling nanocomposite. Materials, 14 (21). art. no. 6667. pp. 1-20. ISSN 1996-1944

Mutafi, Ayad and Yidris, Noorfaizal and Koloor, Seyed Saeid Rahimian and Petrů, Michal (2020) Numerical prediction of residual stresses distribution in thin-walled press-braked stainless steel sections. Materials, 13 (23). pp. 1-31. ISSN 1996-1944

Malekbala, Mohamad Rasool and Soltani, Soroush and Abdul Rashid, Suraya and Abdullah, Luqman Chuah and Rashid, Umer and Nehdi, Imededdine Arbi and Choong, Thomas Shean Yaw and Teo, Siow Hwa (2020) Optimization the process of chemically modified carbon nanofiber coated monolith via response surface methodology for CO2 capture. Materials, 13 (7). art. no. 1775. pp. 1-24. ISSN 1996-1944

Mohammad Padzil, Farah Nadia and Lee, Seng Hua and Mohamed @ Asa'ari, Ainun Zuriyati and Lee, Ching Hao and Abdullah, Luqman Chuah (2020) Potential of oil palm empty fruit bunch resources in nanocellulose hydrogel production for versatile applications: a review. Materials, 13 (5). art. no. 1245. pp. 1-26. ISSN 1996-1944

Mohd Bakhori, Noremylia and Yusof, Nor Azah and Abdullah, Jaafar and Wasoh @ Mohamad Isa, Helmi and Ab. Rahman, Siti Khadijah and Abd Rahman, Siti Fatimah (2020) Surface enhanced CdSe/ZnS QD/SiNP electrochemical immunosensor for the detection of Mycobacterium tuberculosis by combination of CFP10-ESAT6 for better diagnostic specificity. Materials, 13 (1). art. no. 149. pp. 1-15. ISSN 1996-1944

Mensah, Ebenezer Ekow and Abbas, Zulkifly and Azis, Raba'ah Syahidah and Khamis, Ahmad Mamoun (2019) Enhancement of complex permittivity and attenuation properties of recycled hematite (α-Fe2O3) using nanoparticles prepared via ball milling technique. Materials, 12 (10). art. no. 1696. pp. 1-12. ISSN 1996-1944

Mensah, Ebenezer Ekow and Abbas, Zulkifly and Azis, Raba'ah Syahidah and Khamis, Ahmad Mamoun (2019) Enhancement of the complex permittivity and attenuation properties of recycled hematite (a-Fe2O3) using nanoparticles prepared via the ball milling technique. Materials, 12 (10). pp. 1-13. ISSN 1996-1944

Mohamad, Nur Aqilah and Azis, Norhafiz and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Yunus, Robiah and Yaakub, Zaini (2018) Ageing study of palm oil and coconut oil in the presence of insulation paper for transformers application. Materials, 11 (4). pp. 1-20. ISSN 1996-1944

Mohd Fudzi, Laimy and Zainal, Zulkarnain and Lim, Hong Ngee and Chang, Sook Keng and Holi, Araa Mebdir and Sarif @ Mohd Ali, Mahanim (2018) Effect of temperature and growth time on vertically aligned ZnO nanorods by simplified hydrothermal technique for photoelectrochemical cells. Materials, 11 (5). art. no. 704. pp. 1-13. ISSN 1996-1944

Md. Jamil, Siti Nurul Ain and Daik, Rusli and Ahmad, Ishak (2014) Synthesis and thermal properties of acrylonitrile/butyl acrylate/fumaronitrile and acrylonitrile/ethyl hexyl acrylate/fumaronitrile terpolymers as a potential precursor for carbon fiber. Materials, 7 (9). pp. 6207-6223. ISSN 1996-1944

Naganthran, Ashwini and Verasoundarapandian, Gayathiri and Khalid, Farah Eryssa and Masarudin, Mas Jaffri and Zulkharnain, Azham and Mohammad Nawawi, Norazah and Karim, Murni and Che Abdullah, Che Azurahanim and Ahmad, Siti Aqlima (2022) Synthesis, characterization and biomedical application of silver nanoparticles. Materials, 15 (2). art. no. 427. pp. 1-43. ISSN 1996-1944

Noor Hisham, Noor Aizat and Mohd Zaid, Mohd Hafiz and Ab Aziz, Sidek and Muhammad, Farah Diana (2021) Comparison of foam glass-ceramics with different composition derived from Ark Clamshell (ACS) and Soda Lime Silica (SLS) glass bottles sintered at various temperatures. Materials, 14 (3). art. no. 570. pp. 1-14. ISSN 1996-1944

Naveen, Jesuarockiam and Jawaid, Mohammad and Zainudin, Edi Syams and Hameed Sultan, Mohamed Thariq and Yahaya, Ridwan (2019) Improved mechanical and moisture-resistant properties of woven hybrid epoxy composites by graphene nanoplatelets (GNP). Materials, 12 (8). art. no. 1249. pp. 1-18. ISSN 1996-1944

Othman, Nurul Husna and Mustapha, Mazli and Sallih, Nabihah and Ahmad, Azlan and Mustapha, Faizal and Che Ismail, Mokhtar (2022) The effect of residual solvent in carbon−based filler reinforced polymer coating on the curing properties, mechanical and corrosive behaviour. Materials, 15 (10). art. no. 3445. pp. 1-15. ISSN 1996-1944

Ostovan, Farhad and Matori, Khamirul Amin and Toozandehjani, Meysam and Oskoueian, Arshin and Mohamed Yusoff, Hamdan and Yunus, Robiah and Mohamed Ariff, Azmah Hanim (2016) Nanomechanical behavior of multi-walled carbon nanotubes particulate reinforced aluminum nanocomposites prepared by ball milling. Materials, 9 (3). pp. 1-9. ISSN 1996-1944

Rayung, Marwah and Aung, Min Min and Azhar, Shah Christirani and Abdullah, Luqman Chuah and Su'ait, Mohd Sukor and Ahmad, Azizan and Md. Jamil, Siti Nurul Ain (2020) Bio-based polymer electrolytes for electrochemical devices: insight into the ionic conductivity performance. Materials, 13 (4). art. no. 838. pp. 1-47. ISSN 1996-1944

Rashid, Umer and Ahmad, Junaid and Ibrahim, Mohd Lokman and Nisar, Jan and Hanif, Muhammad Asif and Choong, Thomas Shean Yaw (2019) Single-pot synthesis of biodiesel using efficient sulfonated-derived tea waste-heterogeneous catalyst. Materials, 12 (14). art. no. 2293. pp. 1-16. ISSN 1996-1944

Sim, Bernard Maxmillan and Tang, Sai Hong and Alrifaey, Moath and Jong, Edwin Nyon Tchan (2021) Analyzing the effects of heat treatment on SMAW duplex stainless steel weld overlays. Materials, 15 (5). art. no. 1833. pp. 1-13. ISSN 1996-1944

Shaifudin, Muhamad Syaizwadi and Mohd Ghazali, Mohd Sabri and Wan Mohamad Kamaruzzaman, Wan Mohamad Ikhmal and Wan Abdullah, Wan Rafizah and Kassim, Syara and Ismail, Nur Quratul Aini and Sa’at, Nor Kamilah and Mohd Zaid, Mohd Hafiz and Mohd Fekeri, Maria Fazira and Matori, Khamirul Amin (2021) Synergistic effects of Pr6O11 and Co3O4 on electrical and microstructure features of ZnO-BaTiO3 varistor ceramics. Materials, 14 (4). pp. 1-17. ISSN 1996-1944

Shamsuri, Ahmad Adlie and Md. Jamil, Siti Nurul Ain (2020) Compatibilization effect of ionic liquid-based surfactants on physicochemical properties of PBS/rice starch blends: an initial study. Materials, 13 (8). art. no. 1885. pp. 1-13. ISSN 1996-1944

Sing, Chuong Chuo and Mohamed, Sarajul Fikri and Mohd Setapar, Siti Hamidah and Ahmad, Akil and Jawaid, Mohammad and Wani, Waseem A. and Yaqoob, Asim Ali and Mohamad Ibrahim, Mohamad Nasir (2020) Insights into the current trends in the utilization of bacteria for microbially induced calcium carbonate precipitation. Materials, 13 (21). art. no. 4993. pp. 1-28. ISSN 1996-1944

Sim, Bernard Maxmillan and Hong, Tang Sai and Mohamed Ariff, Azmah Hanim and Tchan, Edwin Jong Nyon and Talari, Mahesh Kumar (2019) The influence of post weld heat treatment precipitation on duplex stainless steels weld overlay towards pitting corrosion. Materials, 12 (20). pp. 1-11. ISSN 1996-1944

Shazali, Nur Aima Hafiza and Zaidi, Noorzaileen Eileena and Ariffin, Hidayah and Abdullah, Luqman Chuah and Ghaemi, Ferial and Abdullah, Jafri Malin and Takashima, Ichiro and Nik Abd Rahman, Nik Mohd Afizan (2019) Characterization and cellular internalization of spherical cellulose nanocrystals (CNC) into normal and cancerous fibroblasts. Materials, 12 (19). art. no. 3251. pp. 1-16. ISSN 1996-1944

Sheh Omar, Nur Alia and Yap, Wing Fen and Saleviter, Silvan and Mohd Daniyal, Wan Mohd Ebtisyam Mustaqim and Anas, Nur Ain Asyiqin and Md Ramdzan, Nur Syahira and Roshidi, Mohammad Danial Aizad (2019) Development of a graphene-based surface plasmon resonance optical sensor chip for potential biomedical application. Materials, 12 (12). art. no. 1928. pp. 1-14. ISSN 1996-1944

Shamsuri, Ahmad Adlie and Daik, Rusli (2013) Utilization of an ionic liquid/urea mixture as a physical coupling agent for agarose/talc composite films. Materials, 6 (2). pp. 682-698. ISSN 1996-1944

Tamjidy, Mehran and Baharudin, B. T. Hang Tuah and Paslar, Shahla and Matori, Khamirul Amin and Sulaiman, Shamsuddin and Fadaeifard, Firouz (2017) Multi-objective optimization of friction stir welding process parameters of AA6061-T6 and AA7075-T6 using a biogeography based optimization algorithm. Materials, 10 (5). art. no. 533. pp. 1-19. ISSN 1996-1944

Yidris, Noorfaizal and Isham, Nur Hazwani and Gires, Ezanee and Mutafi, Ayad (2020) The effects of loading conditions on the behaviour of fixed-ended plain channel columns. Materials, 13 (6). art. no. 1441. pp. 1-19. ISSN 1996-1944

Yaakob, Zahira and Bshish, Ahmed M. and Ebshish, Ali and Tasirin, Siti Masrinda and Alhasan, Fatah H. (2013) Hydrogen production by steam reforming of ethanol over nickel catalysts supported on sol gel made alumina: influence of calcination temperature on supports. Materials, 6 (6). pp. 2229-2239. ISSN 1996-1944