UPM Institutional Repository

Browse by Journal Title

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 76.

Mahshuri, Yusof and Sinin, Hamdan and Sinin, Aaliyawani Ezzerin (2023) Mechanical properties of concrete with clam shell powder (csp) as partial cement replacement. Key Engineering Materials, 956. 205- 211. ISSN 1013-9826; ESSN: 1662-9795

Lahuri, Azizul Hakim and Yarmo, Mohd Ambar and Abu Tahari, Maratun Najiha and Dzakaria, Norliza (2022) Adsorption isotherm analysis for CO2 capture using barium oxide impregnated iron (iii) oxide by ultrasonic-assisted synthesis. Key Engineering Materials, 908. pp. 379-384. ISSN 1662-9795

Mohamed Sharif, Noor Fadzilah and Ab Kadir, Mohd Zainal Abidin and Shafie, Suhaidi and Md Din, Muhamad Faiz and Yusuf, Yusnita and Samaila, Buda (2022) Light absorption enhancement using Graphene Quantum Dots and the effect of N-719 dye loading on the photoelectrode of Dye-Sensitized Solar Cell (DSSC). Key Engineering Materials, 908. 259 - 264. ISSN 1013-9826; ESSN: 1662-9795

Hamzah, Khairum and Nik Long, Nik Mohd Asri (2020) Mode stresses for the interaction between two inclined cracks in bonded two half planes. Key Engineering Materials, 861. 524 - 528. ISSN 1013-9826; ESSN: 1662-9795

Asrofi, Mochamad and Sujito and Syafri, Edi and Salit, Mohd Sapuan and Rushdan, Ahmad Ilyas (2020) Improvement of biocomposite properties based tapioca starch and sugarcane bagasse cellulose nanofibers. Key Engineering Materials, 849. 96 - 101. ISSN 1013-9826; ESSN: 1662-9795

Mohd Taha, Mastura and Salit, Mohd Sapuan and Muhammad, Noryani (2019) Material selection of natural fibers for composite automotive component using analytic hierarchy process/analytic network process in concurrent engineering approach. Key Engineering Materials, 801. pp. 53-58. ISSN 1013-9826; ESSN: 1662-9795

Abu Bakar, Noor Fitrah and Naim, Mohd Nazli and Boon, Yih Tien and Lenggoro, Wuled and Ahmad, Noraini (2019) Stabilisation of emulsified Agarwood oil in an aqueous system using non-ionic surfactant. Key Engineering Materials, 797. pp. 186-195. ISSN 1662-9795

Ibrahim, R.E. and Ramli, Rosmamuhamadani and Talari, Mahesh Kumar and M. Yahaya, Sabrina and Sulaiman, Sreenivasan and Ismail, Mohd Idris Shah (2017) Preliminary study on properties of aluminium-silicon (Al-Si) alloys reinforced by in situ titanium diboride (TiB2). Key Engineering Materials, 737. pp. 11-15. ISSN 1013-9826; ESSN: 1662-9795

Ojo-Kupoluyi, Oluwatosin Job and Mohd Tahir, Suraya and Hanim, Mohamed Ariff Azmah and Baharudin, B. T. Hang Tuah and Matori, Khamirul Amin and Anuar, Mohd Shamsul (2017) Sintering behaviour of cemented tungsten carbide and steel bilayer. Key Engineering Materials, 740. pp. 60-64. ISSN 1013-9826; ESSN: 1662-9795

Yap, Taufiq Yun Hin and Yap, Davin Kin Yew (2016) Catalytic flash gasification of EFB for hydrogen production using zeolite supported metal oxide catalysts. Key Engineering Materials, 707. pp. 166-174. ISSN 1013-9826; ESSN: 1662-9795

Alkbir, M. F. M. and S., M. Sapuan and Nuraini, A. A. and Ishak, Mohamad Ridzwan (2016) Comparative investigation on the failure modes of natural kenaf/epoxy reinforced composite hexagonal tubes. Key Engineering Materials, 709. pp. 7-10. ISSN 1013-9826; ESSN: 1662-9795

Osman, Mohd Junaedy and Wan Yunus, Wan Md Zin and Ong, Keat Khim and Mohd Kasim, Noor Azilah and Jamal, Siti Hasnawati and Ahmad @ Ayob, Mansor and Ibrahim, Nor Azowa (2016) Surface modification of multi-walled carbon nanotube using double-chained quaternary ammonium bromide. Key Engineering Materials, 701. pp. 18-22. ISSN 1013-9826; ESSN: 1662-9795

Alsultan, Abdulkareem Ghassan and Yap, Taufiq Yun Hin and Mijan, Nurul Asikin (2016) Effective catalytic deoxygenation of waste cooking oil over nanorods activated carbon supported CaO. Key Engineering Materials, 707. pp. 175-181. ISSN 1013-9826; ESSN: 1662-9795

Ramli, Rosmamuhamadani and Sulaiman, Shamsuddin and Hanim, Mohamed Ariff Azmah and Ismail, Mohd Idris Shah and Talari, Mahesh (2016) Mechanical and microstructure characterization of aluminium-copper (Al-Cu) reinforced with in situ titanium diboride (TiB2). Key Engineering Materials, 673. pp. 117-125. ISSN 1013-9826; ESSN: 1662-9795

Jaafar, Che Nor Aiza and Zainol, Ismail and Mohamad Sapri, Mohd Amirul Zalif (2016) The effects of thermal ageing on properties and microstructure of Al-6063 alloy. Key Engineering Materials, 694. pp. 111-115. ISSN 1013-9826; ESSN: 1662-9795

Mohd Noor, Hanina and Muhamad, Hairul Shahril and Ismail, Ismatul Nurul Asyikin and Mat Radzi, Salina and Mohamed Rehan, Maryam and Abdul Kader, Abdul Jalil and Mohamad, Rosfarizan (2014) Protein produced by Bacillus subtilis ATCC21332 in the presence of Cymbopogon flexuosus essential oil. Key Engineering Materials, 594-595. pp. 370-377. ISSN 1013-9826; ESSN: 1662-9795

Shasidharan, Gomesh Nair and Misrun, Muhammad Irwanto and Yusoff, Mohd Irwan and Zambak, Muhammad Fitra and Hashim, Uda and Mariun, Norman (2014) Review on Malaysian and Thailand's perspective towards renewable energy. Key Engineering Materials, 594-595. pp. 325-328. ISSN 1013-9826; ESSN: 1662-9795

Al-Habashi, Ramadan and Abbas, Zulkifly (2013) New developed formula to calculate the permittivity of ferrite-polymer composite. Key Engineering Materials, 553. pp. 53-58. ISSN 1013-9826

Japar, Sahari and Salit, Mohd Sapuan and Zahari, Nur Ismarrubie and Ab. Rahman, Mohamad Zaki (2011) Comparative study of physical properties based on different parts of sugar palm fiber reinforced unsaturated polyester composites. Key Engineering Materials, 471-47 (1). pp. 455-460. ISSN 1013-9826

Mohd Ariffin, Mohd Khairol Anuar and Nik Hassan, Nik Mohamad Idham and Abdullah, Mohd Firdaus (2011) Analysis of MPV dashboard using solidworks and ABAQUS. Key Engineering Materials, 471-47. pp. 634-639. ISSN 1013-9826

Golestaneh, Amirreza Fahim and Ali, Aidy and Bayat, Mehdi (2011) Analytical and numerical investigation of fatigue crack growth in aluminum alloy. Key Engineering Materials, 462-463. pp. 1050-1055. ISSN 1013-9826; ESSN: 1662-9795

Hosseinabadi, Reza Afshar and Ali, Aidy and Sahari, Barkawi and Bayat, Mehdi (2011) Auto adjust masses of automotive structures with desired centre of gravity. Key Engineering Materials, 462-463. pp. 812-816. ISSN 1013-9826; ESSN: 1662-9795

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi (2011) Characterization of shot peened 2024-T351 aluminum alloy. Key Engineering Materials, 462-463. pp. 912-917. ISSN 1013-9826; ESSN: 1662-9795

Sulaiman, Suraya and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and M. Sayuti (2011) Computer simulation and experimental investigation of solidification casting process. Key Engineering Materials, 471-472. pp. 601-605. ISSN 1013-9826; ESSN: 1662-9795

Abang Abdul Majid, Dayang Laila and Ahmad, Zuraida and Anuar, Hazleen and Halim, Zahurin and Md Yusof, Fauziah (2011) Cotton reinforced biopolymer matrix composite: Effect of ultraviolet on its mechanical properties. Key Engineering Materials, 471-47 (March). pp. 928-932. ISSN 1662-9795

Jaafar, Mohd Saleh and Noorzaei, Jamaloddin and Abdulrazeg, Aeid Ali and Khanehzaie, P. and Mohammed, Thamer Ahmed and Thanoon, Waleed Abdulmalik (2011) Cracking safety evaluation of massive concrete structures. Key Engineering Materials, 462-463. pp. 1403-1408. ISSN 1013-9826

Varatharajoo, Renuganth and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Zahari, Rizal and Kahle, Ralph (2011) Critical speeds for carbon/epoxy composite rotors in spacecraft energy storage applications. Key Engineering Materials, 471-472. pp. 37-42. ISSN 1013-9826; ESSN: 1662-9795

Abdan, Khalina and Zainudin, Edi Syams and Abdul Rahman, Mohd Faizal and Harun, Jalaluddin and Abdul Hanan, Umar and W. N., W. N. Syuhada (2011) Development of biocomposite wall cladding from kenaf fibre by extrusion molding process. Key Engineering Materials, 471-472. pp. 239-244. ISSN 1013-9826; ESSN: 1662-9795

Ibraheem, Sameer Adnan and Ali, Aidy and Abdan, Khalina (2011) Development of green insulation boards from kenaf fibres part 1: development and characterization of mechanical properties. Key Engineering Materials, 462-463. pp. 1343-1348. ISSN 1013-9826; ESSN: 1662-9795

Ibraheem, Sameer Adnan and Ali, Aidy and Abdan, Khalina (2011) Development of green insulation boards from kenaf fibres part 2: characterizations of thermal and water absorption. Key Engineering Materials, 462-463. pp. 1331-1336. ISSN 1013-9826; ESSN: 1662-9795

Aji, Isuwa Suleiman and Zainudin, Edi Syams and Abdan, Khalina and Salit, Mohd Sapuan (2011) Effect of fibre size and fibre loading on tensile properties of hybridized kenaf/PALF reinforced HDPE composite. Key Engineering Materials, 471-472. pp. 680-685. ISSN 1013-9826; ESSN: 1662-9795

Ibrahim, Mohd Shukri and Abdul Aziz, Faieza and Salit, Mohd Sapuan and Mohd Tahir, Suraya (2011) Effect of filler loading and coupling agent on tensile and impact properties of polypropylene with oil palm ash composites. Key Engineering Materials, 471-472. pp. 1130-1135. ISSN 1013-9826; ESSN: 1662-9795

M. Sayuti and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Vijayaram, Thoguluva Raghavan and Sulaiman, Suraya (2011) Effect of quartz-silicon dioxide particulate on tensile properties of aluminium alloy cast composites. Key Engineering Materials, 471-472. pp. 727-732. ISSN 1013-9826; ESSN: 1662-9795

Leman, Zulkiflle and Salit, Mohd Sapuan (2011) Effects of Impregnation Pressure on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres. Key Engineering Materials, 471-47 (2011). pp. 1153-1158. ISSN 1662-9795

Leman, Zulkiflle and Salit, Mohd Sapuan (2011) Effects of Impregnation Time on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres. Key Engineering Materials, 471-47 (2011). pp. 1147-1152. ISSN 1662-9795

Golestaneh, Amirreza Fahim and Ali, Aidy and Bayat, Mehdi (2011) Experimental and analytical studies of fatigue crack growth in peened after skimmed friction stir welded joint of 2024-T351 Al alloy. Key Engineering Materials, 462-463. pp. 1212-1217. ISSN 1013-9826; ESSN: 1662-9795

Sidhu, Rajdave Singh and Ali, Aidy and Hassan, Mohd Roshdi (2011) Experimental determination of fatigue life of automotive jounce bumper. Key Engineering Materials, 462-463. pp. 634-638. ISSN 1013-9826; ESSN: 1662-9795

Seyajah, Norhisham and Abdul Aziz, Faieza and Ismail, Napsiah and Salit, Mohd Sapuan and Ibrahim, Mohd Shukri (2011) Flexural mechanical characteristic of sawdust and chipwood filled epoxy composites. Key Engineering Materials, 471-472. pp. 1064-1069. ISSN 1013-9826; ESSN: 1662-9795

Abang Abdul Majid, Dayang Laila and Basri, Shahnor and Varatharajoo, Renuganth and Attaran, Abdolhamid (2011) Flutter analysis of a hybrid plate-like fiber-reinforced composite wing. Key Engineering Materials, 471-472. pp. 1107-1112. ISSN 1013-9826; ESSN: 1662-9795

Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah and Noorzaei, Jamaloddin and Hejazi, Farzad and Kojouri, Samira Jilani and Thanoon, Waleed Abdulmalik (2011) Inelastic seismic response of RC building with control system. Key Engineering Materials, 462-463. pp. 241-246. ISSN 1013-9826

Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Sulaiman, Shamsuddin and Yusuf, Muhammad (2011) Influence of cutting parameters on surface roughness for wet and dry turning process. Key Engineering Materials, 471-472 (1). pp. 233-238. ISSN 1013-9826

Mohammad, Khairul Azhar and Ali, Aidy and Oshkour, Azim Ataollahi and Sahari, Barkawi and Abdullah, Shahrum (2011) Investigation of creep fatigue crack propagation in aluminium tube. Key Engineering Materials, 462-463. pp. 541-546. ISSN 1013-9826; ESSN: 1662-9795

Salit, Mohd Sapuan and Ab. Rahman, Mohamad Zaki and Zahari, Nur Ismarrubie and Japar, Sahari (2011) Investigation on bending strength and stiffness of sugar palm fibre from different parts reinforced unsaturated polyester composites. Key Engineering Materials, 471-47 (1). pp. 502-506. ISSN 1013-9826

Ahmad Zawawi, Nor'aini and Ismail, Alyani and Abdan, Khalina and Mahdi, Mohd Adzir (2011) Investigation on the microwave properties of kenaf and rice-husk fiber reinforced pla composite utilizing one-port coaxial transmission line reflection method. Key Engineering Materials, 471-472. pp. 868-873. ISSN 1013-9826; ESSN: 1662-9795

Lasat, Agnes Surai and Abdan, Khalina and Ibrahim, Nor Azowa (2011) Kenaf Nanofiber/Polylactic Asid (PLA) Nanocomposite. Key Engineering Materials, 471-47 (-). pp. 1095-1100. ISSN 1013-9826

Abdul Samad, Mohd Syazwan and Ali, Aidy and Mohd Ariffin, Mohd Khairol Anuar (2011) Life prediction of rubber automotive components using finite element method. Key Engineering Materials, 462-463. pp. 535-540. ISSN 1013-9826; ESSN: 1662-9795

M. Sayuti and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Sulaiman, Suraya and Esmaeilian, Gholamreza (2011) Mechanical vibration technique for enhancing mechanical properties of particulate reinforced aluminium alloy matrix composite. Key Engineering Materials, 471-472. pp. 721-726. ISSN 1013-9826; ESSN: 1662-9795

Fatchurrohman, Nanang and Sulaiman, Shamsuddin and Mohd Ariffin, Mohd Khairol Anuar and Abdul Aziz, Faieza and Baharudin, B. T. Hang Tuah (2011) Metal matrix composites: solidification parameters of aluminium-11.8% silicon alloy reinforced with titanium carbide particulates. Key Engineering Materials, 471-472. pp. 1081-1084. ISSN 1013-9826; ESSN: 1662-9795

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2011) Micro-hardness and residual stress relaxation of 2024 T351 aluminum alloy. Key Engineering Materials, 462-463. pp. 343-348. ISSN 1013-9826; ESSN: 1662-9795

Mustaffa, Nurul Akmil and Abdullah, Luqman Chuah and Ahmad @ Ayob, Mansor and Mohd Dahlan, Khairul Zaman (2011) Nano-alumina and radiation effect on the mechanical properties of high density polyethylene/hydroxy apatite composite. Key Engineering Materials, 471-472. pp. 121-126. ISSN 1013-9826; ESSN: 1662-9795

Mohieldin, S. D. and Zainudin, Edi Syams and Md. Tahir, Paridah and Mohamed, Ainun Zuriyati (2011) Nanotechnology in pulp and paper industries: a review. Key Engineering Materials, 471-472. pp. 251-256. ISSN 1013-9826; ESSN: 1662-9795

Mat Jusoh, Suriani and Ali, Aidy and Salit, Mohd Sapuan and Abdan, Khalina (2011) Non-destructive techniques (NDT) in composite materials. In: Fracture and Strength of Solids VII. Key Engineering Materials, 462-463 . Trans Tech Publications, Switzerland, pp. 918-924. ISBN 0878492100, 9780878492107

Shahrjerdi, Ali and Mustapha, Faizal and Salit, Mohd Sapuan and Bayat, Mehdi and Abang Abdul Majid, Dayang Laila and Zahari, Rizal (2011) Optimal sintering procedure to fabrication of functionally graded Hydroxyapatite-Titanium. Key Engineering Materials, 471-472. pp. 140-144. ISSN 1013-9826; ESSN: 1662-9795

El-Shekeil, Yousuf Ali Gumaan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdan, Khalina (2011) Optimizing processing parameters and fiber size for kenaf fiber reinforced thermoplastic polyurethane composite. Key Engineering Materials, 471-472. pp. 297-302. ISSN 1013-9826; ESSN: 1662-9795

Aji, Isuwa Suleiman and Zainudin, Edi Syams and Abdan, Khalina and Salit, Mohd Sapuan (2011) Optimizing processing parameters for hybridized kenaf/PALF reinforced HDPE composite. Key Engineering Materials, 471-472. pp. 674-679. ISSN 1013-9826; ESSN: 1662-9795

Jalaluddin, Mai Nursherida and Sahari, Barkawi and Abdul Aziz, Nuraini (2011) Parametric study of automotive composite bumper beams subjected to frontal impacts. Key Engineering Materials, 471-472. pp. 484-489. ISSN 1013-9826; ESSN: 1662-9795

Ng, Wei Sim and Mustapha, Faizal and Varatharajoo, Renuganth and Zahari, Rizal and Abang Abdul Majid, Dayang Laila (2011) Parametric study on cohesive element for composite fuselage model. Key Engineering Materials, 471-472. pp. 1085-1090. ISSN 1013-9826; ESSN: 1662-9795

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi (2011) Prediction of residual stress relaxation of shot peened 2024-T351 aluminum alloy: part 1. Key Engineering Materials, 462-463. pp. 1355-1360. ISSN 1013-9826; ESSN: 1662-9795

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi (2011) Prediction of residual stress relaxation of shot peened 2024-T351 aluminum alloy: part 2. Key Engineering Materials, 462-463. pp. 1349-1354. ISSN 1013-9826; ESSN: 1662-9795

Haris, Mohd Yusoff and Abang Abdul Majid, Dayang Laila and Zainudin, Edi Syams and Mustapha, Faizal and Zahari, Rizal and Halim, Zahurin (2011) Preliminary review of biocomposites materials for aircraft radome application. Key Engineering Materials, 471-472. pp. 563-567. ISSN 1013-9826; ESSN: 1662-9795

Abd Rahman, Mohd Firdaus and Zainudin, Edi Syams (2011) Properties of kenaf filled unplasticized polyvinyl chloride composites. Key Engineering Materials, 471-72. pp. 507-512. ISSN 1013-9826; ESSN: 1662-9795

Abdan, Khalina and Zainudin, Edi Syams and Aji, Isuwa Suleiman (2011) Rheological behaviour of polypropylene/kenaf fibre composite: effect of fibre size. Key Engineering Materials, 471-472. pp. 513-517. ISSN 1013-9826; ESSN: 1662-9795

Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah and Noorzaei, Jamaloddin and Hejazi, Farzad and Dalili, Mohammad S. and Thanoon, Waleed Abdulmalik (2011) Seismic response evaluation of RC tower connected to short rigid buildings. Key Engineering Materials, 462-46 (-). pp. 569-575. ISSN 1013-9826

Mohd Ariffin, Mohd Khairol Anuar and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Tang, Sai Hong and Sreenivasan, Subramaniasarma (2011) Simulation of thermoset injection for bulk moulding compounds (BMC). Key Engineering Materials, 471-472. pp. 1101-1106. ISSN 1013-9826; ESSN: 1662-9795

Leman, Zulkiflle and Salit, Mohd Sapuan and S., Suppiah (2011) Sugar Palm Fibre-Reinforced Unsaturated Polyester Composite Interface Characterisation by Pull-Out Test. Key Engineering Materials, 471-47 (2011). pp. 1034-1039. ISSN 1013-9826

Seyajah, Norhisham and Abdul Aziz, Faieza and Ismail, Napsiah and Salit, Mohd Sapuan and Ibrahim, Mohd Shukri (2011) Tensile properties and micromorphologies of sawdust and chipwood filled epoxy composites. Key Engineering Materials, 471-472. pp. 1070-1074. ISSN 1013-9826; ESSN: 1662-9795

Zahari, Rizal and Abang Abdul Majid, Dayang Laila and Mustapha, Faizal and Varatharajoo, Renuganth and A. Rasid, Zainudin and Ayob, Amran (2011) Thermal buckling and post-buckling improvements of laminated composite plates using finite element method. Key Engineering Materials, 471-47 (5). pp. 536-541. ISSN 1013-9826

Shahrjerdi, Ali and Mustapha, Faizal and Salit, Mohd Sapuan and Bayat, Mehdi and Abang Abdul Majid, Dayang Laila and Zahari, Rizal (2011) Thermal free vibration analysis of temperature-dependent functionally graded plates using second order shear deformation. Key Engineering Materials, 471-472. pp. 133-139. ISSN 1013-9826; ESSN: 1662-9795

Wan Hussin, Wan Mohamad Haniffah and Abdan, Khalina and Salit, Mohd Sapuan (2011) Water retention in kenaf/polypropylene composites due to repeated immersion and drying conditions. Key Engineering Materials, 471-472. pp. 438-443. ISSN 1013-9826; ESSN: 1662-9795

Kamarudin, Siti Hasnah and Abdan, Khalina and Ali, Aidy and Sharif, Jamaliah (2011) The effect of EVA on composite that made of PP nanoclay. Key Engineering Materials, 462-463. pp. 925-930. ISSN 1013-9826; ESSN: 1662-9795

Mohamad Zain, Siti Nur Zafirah and Zahari, Nur Ismarrubie and Zainudin, Edi Syams (2011) The effect of aging temperature on mechanical properties of banana pseudostem fiber reinforced polymer composite. Key Engineering Materials, 471-472. pp. 444-448. ISSN 1013-9826; ESSN: 1662-9795

Abdullah, Azhar and Sulaiman, Shamsuddin and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Vijayaram, Thoguluva Raghavan (2011) The effect of bentonite clay on green compression strength for tailing sands from old tin mines in Perak state, Malaysia for making green sand casting mould. Key Engineering Materials, 471-472. pp. 769-774. ISSN 1013-9826; ESSN: 1662-9795

A. Talib, Rosnita and Abdan, Khalina and Mohamed Amin Tawakkal, Intan Syafinaz (2011) The influence of mercerised kenaf fibres reinforced polylactic acid composites on dynamic mechanical analysis. Key Engineering Materials, 471-472 (2). pp. 815-820. ISSN 1013-9826

Affandi, Nuraishah Bazilah and Mohd. Rafie, Azmin Shakrine and Basri, Shahnor and Romli, Fairuz Izzudin and Abang Abdul Majid, Dayang Laila and Mustapha, Faizal (2011) A preliminary study on translational kinetic energy absorption using coconut-fiber (Coir) sheets as a potential impact-worthy constituent in advanced aerospace material. Key Engineering Materials, 471-472. pp. 1028-1033. ISSN 1013-9826; ESSN: 1662-9795

Dashtizadeh, Zahra and Ali, Aidy and Abdan, Khalina (2011) A review of non-destructive thermography techniques toward structural integrity of bio-composites. Key Engineering Materials, 471-472. pp. 103-108. ISSN 1013-9826; ESSN: 1662-9795

Mohd Aris, Khairul Dahri and Mustapha, Faizal and Salit, Mohd Sapuan and Abang Abdul Majid, Dayang Laila (2011) A structural health monitoring of a pitch catch active sensing of PZT sensor on normal, damage and repair aircraft spoiler. Key Engineering Materials, 471-472. pp. 1124-1129. ISSN 1013-9826; ESSN: 1662-9795

This list was generated on Sun Nov 24 17:21:22 2024 +08.