Browse by Journal Title
![]() | Up a level |
Number of items: 57.
Hamdan, Sinin and Sinin, Aaliyawani Ezzerin and Mohamad Said, Khairul Anwar and Abdullah, Johari
(2024)
Quantitative assessment of sound characteristics using the affinity (A), mean affinity (MA), brightness (S), mean contrast (MC), harmonicity (H) and monotony (M) of Gamelan timbre.
Journal of Engineering Science and Technology, 19 (2).
pp. 684-704.
ISSN 1823-4690
Ibrahim, Nur Amira and Misron, Norhisam and Vaithilingam, Chockalingam Aravind and Aris, Ishak and Mailah, Nashiren Farzilah
(2023)
Basic characteristics of interior and embedded permanent magnet for double stator generator.
Journal of Engineering Science and Technology, 18 (spec.).
pp. 1-12.
ISSN 1823-4690
Alsayed, Abdallah and Aqel, Mohammad O. A. and Kamil, Raja and Sadir, Hayder and Abuzaiter, Alaa and Alezabi, Kamal Ali and Sari, Hasan
(2022)
Optimization-based method for estimating the transmission rate of COVID-19 during the lockdown in Malaysia.
Journal of Engineering Science and Technology, 17 (4).
2287 - 2298.
ISSN 1823-4690
Ismail, Bazilah and A. Wahab, Noor I. and Othman, Mohammad L. and M. Radzi, M. A. and Vijayakumar, Kanendra N. and Rahmat, Mohd K. and Naain, Muhammad N. M.
(2022)
The optimal location and sizing of single and multiple statcom using analytical approaches under high loading occasion.
Journal of Engineering Science and Technology, 17 (6).
3973 - 3988.
ISSN 1823-4690
Rasli, Nur Baitul Izati and Ramli, Nor Azam and Ismail, Mohd Rodzi and Zainordin, Nazatul Syadia and Razman, Muhammad Rizal
(2021)
Effectiveness of ventilation strategies in reducing the temperature in the main prayer halls of mosques in Malaysia.
Journal of Engineering Science and Technology, 16 (4).
2960 - 2979.
ISSN 1823-4690
Tan, K. S. and Wong, Shaw Voon and Megat Ahmad, M. M. H.
(2020)
Design and develop an apparatus for measurement of inertial properties for a typical two-wheel motorcycle.
Journal of Engineering Science and Technology, 15 (5).
2963 - 2985.
ISSN 1823-4690
Hamdan, Sinin and Musib, Ahmad Faudzi and Musoddiq, I. A. and Wahid, H. A.
(2019)
Some studies on the understanding the different tones quality in a bonang set.
Journal of Engineering Science and Technology, 14 (4).
pp. 1960-1973.
ISSN 1823-4690
Ab. Latif, Farah Ezzah and Zainal Abidin, Zurina and Cardona, Francisco and Awang Biak, Dayang Radiah and Md. Tahir, Paridah and Abdan, Khalina and Liew, Kan Ern
(2019)
Physicochemical, structural and mechanical evaluation of bio-based epoxidized jatropha oil blended with amine-cured epoxy resin as new hybrid matrix.
Journal of Engineering Science and Technology, 14 (2).
pp. 1071-1087.
ISSN 1823-4690
Malekzadeh, Mina and Abd Ghani, Abdul Azim
(2019)
Hybrid LTE-802.11ac network: Qos optimality evaluation of the voip codecs techniques.
Journal of Engineering Science and Technology, 14 (1).
pp. 279-290.
ISSN 1823-4690
Jamaluddin, Nurul Fauzani and Ahmad, Siti Anom and Wan Hasan, Wan Zuha and Mohd Noor, Samsul Bahari
(2018)
Filtering corner frequency using Undecimated Wavelet Transform for surface EMG.
Journal of Engineering Science and Technology, 13 (spec.).
61- 70.
ISSN 1823-4690
Che Soh, Azura and Mohamad Radzi, Nur Fadzilah and Mohamad Yusof, Umi Kalsom and Ishak, Asnor Juraiza and Hassan, Mohd Khair
(2018)
Development of electronic nose for classification of aromatic herbs using Artificial Intelligent techniques.
Journal of Engineering Science and Technology, 13 (10).
3043 - 3057.
ISSN 1823-4690
Ab Razak, Mohd Shahrizal and Mohd Nor, Nur Ariffah Zaimah and Jamaluddin, Nurhamizah
(2018)
Planform stability of embayed beaches along the east coast of Peninsular Malaysia.
Journal of Engineering Science and Technology, 13 (2).
pp. 435-448.
ISSN 1823-4690
Mohd Ali, Maimunah and Janius, Rimfiel and Mat Nawi, Nazmi and Hashim, Norhashila
(2018)
Prediction of total soluble solids and pH in banana using near infrared spectroscopy.
Journal of Engineering Science and Technology, 13 (1).
254 - 264.
ISSN 1823-4690
Azpen, Qasim Mhalhal and Baharudin, B. T. Hang Tuah and Sulaiman, Shamsuddin and Mustapha, Faizal
(2018)
Reinforcement and hot workability of aluminium alloy 7075 particulate composites: a review.
Journal of Engineering Science and Technology, 13 (4).
pp. 1034-1057.
ISSN 1823-4690
Nuge, Tamrin and Tshai, Kim Yeow and Lim, Siew Shee and Nordin, Norshariza and Hoque, Md. Enamul
(2017)
Prepration and characterization of Cu-. Fe-, Ag-, Zn- and Ni-doped gelatin nanofibers for possible appliactions in antibacterial nanomedicine.
Journal of Engineering Science and Technology, spec. 1.
68 - 81.
ISSN 1823-4690
Basheer, Talal A. and Wayayok, Aimrun and Yusuf, Badronnisa and Kamal, Md. Rowshon
(2017)
Dam breach parameters and their influence on flood hydrographs for Mosul dam.
Journal of Engineering Science and Technology, 12 (11).
pp. 2896-2908.
ISSN 1823-4690
Chua, Bee Lin and Abdullah, Zunoliza and Pin, Kar Yong and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Yusof, Umi Kalsom
(2017)
Isolation, structure elucidation, identification and quantitative analysis of 1'-acetoxychavicol (ACA) from the roots of Chlorophytum boriviliuanum (safed musli).
Journal of Engineering Science and Technology, 12 (1).
pp. 198-213.
ISSN 1823-4690
Chua, Bee Lin and Abdullah, Zunoliza and Pin, Kar Yong and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw and Yusof, Umi Kalsom
(2017)
Isolation, structure elucidation, identification and quantitative analysis of 1’-acetoxychavicol (ACA) from the roots of chlorophytum boriviliuanum (safed musli).
Journal of Engineering Science and Technology, 12 (1).
pp. 198-213.
ISSN 1823-4690
Ahmed Basher, Amel Basher and Md. Tahir, Paridah and Sudin, Rahim and H'ng, Paik San and Ahmad, Zakiah and Hussein, Ahmed S.
(2017)
Physical-mechanical characteristics of cement-bonded kenaf bast fibres composite boards with different densities.
Journal of Engineering Science and Technology, 12 (8).
pp. 2254-2267.
ISSN 1823-4690
Nuge, Tamrin and Tshai, Kim Yeow and Lim, Siew Shee and Nordin, Norshariza and Hoque, Md. Enamul
(2017)
Preparation and characterization of CU-, FE-, AG-, ZN- and NI- doped gelatin nanofibers for possible applications in antibacterial nanomedicine.
Journal of Engineering Science and Technology, 12 (spec. Mar.).
pp. 68-81.
ISSN 1823-4690
Hashim, Norhashila and Janius, Rimfiel and Osman, Azizah and Othman, Jamarei
(2017)
Variability and predictability of Malaysian export-grade starfruit properties.
Journal of Engineering Science and Technology, 12 (2).
pp. 460-470.
ISSN 1823-4690
Mustafa Kamal, Abu Hena and Idris, Mohd Hanafi
(2016)
Decomposition of Rhizophora apiculata (Blume) and Xylocarpus granatum (Koenig) litter components in tropical Sarawak mangrove, Malaysia.
In: 4th Mangrove & Macrobenthos Meeting (MMM4) 2016, 18-22 July, 2016, St. Augustine, Florida. .
Radzali, Shazana Azfar and Markom, Masturah and Baharin, Badlishah Shah and Othman, Rashidi and Abdul Rahman, Russly
(2016)
Optimisation of supercritical fluid extraction of astaxanthin from Penaeus monodon waste using ethanol-modified carbon dioxide.
Journal of Engineering Science and Technology, 11 (5).
pp. 722-736.
ISSN 1823-4690
Tam, S. W. and Walvekar, Rashmi Gangasa and Rashidi, Saba and Abdullah, Luqman Chuah and Siddiqui, Mohammad Khalid
(2016)
Stability and characterization of CNT nanofluids using polyvinyl alcohol dispersant.
Journal of Engineering Science and Technology, 11 (spec. Feb.).
pp. 1-15.
ISSN 1823-4690
Awaluddin, Saidatul Aliaa and Siajam, Shamsul Izhar and Yoshida, Hiroyuki and Danquah, Michael Kobina and Harun, Mohd Razif
(2016)
Sub-critical water technology for enhanced extraction of bioactive compounds from microalgae.
Journal of Engineering Science and Technology, 11 (spec. July).
pp. 63-72.
ISSN 1823-4690
C. V., Aravind and Misron, Norhisam and K. M., Suresh and G. P., Ramesh
(2015)
Assessment on the harnessing of the energy from the back pressure chamber of palm oil mill.
Journal of Engineering Science and Technology (Spec. 8).
46 - 56.
ISSN 1823-4690
Lim, S. C. and Gomes, C. and A. Kadir, M. Z. A. and Nourirad, G. and Malek, Z. A.
(2015)
Behaviour of backfill materials for electrical grounding systems under high voltage conditions.
Journal of Engineering Science and Technology, 10 (6).
pp. 811-826.
ISSN 1823-4690
Lai, Ghuan Rhung and Che Soh, Azura and Md. Sarkan, Haslina and Abdul Rahman, Ribhan Zafira and Hassan, Mohd Khair
(2015)
Controlling traffic flow in multilane-isolated intersection using ANFIS approach techniques.
Journal of Engineering Science and Technology, 10 (8).
pp. 1009-1034.
ISSN 1823-4690
Misron, Norhisam and Vaithilingam, Chockalingam Aravind and Mazalan, Siti Khodijah and Mailah, Nashiren Farzilah
(2015)
Unified control structure of multi-type interior permanent magnet motor.
Journal of Engineering Science and Technology, 10 (3).
pp. 322-339.
ISSN 1823-4690
Toosi, Saman and Misron, Norhisam and Hanamoto, Tsuyoshi and Aris, Ishak and Mohd Radzi, Mohd Amran and Yamada, Hiroaki
(2014)
Configurations comparison of multidirectional matrix converter for low power application.
Journal of Engineering Science and Technology, 9 (spec.).
pp. 1-10.
ISSN 1823-4690
Mailah, Nashiren Farzilah and Othman, S. S. T. and Aris, Ishak and Misron, Norhisam and Hanamoto, Tsuyoshi and Yamada, H.
(2014)
Determination of triggering angle through a novel graphical method analysis.
Journal of Engineering Science and Technology, 9 (spec.).
pp. 90-97.
ISSN 1823-4690
Waqas, Usama and Mohd Radzi, Mohd Amran and Mariun, Norman
(2014)
Dynamic voltage restorer for efficient detection and compensation of voltage SAG using ANN based LMS as a new control strategy.
Journal of Engineering Science and Technology, 9 (spec.).
pp. 21-29.
ISSN 1823-4690
Md Yunus, Nurul Amziah and Firouzeh, S. A. and Sulaiman, Nasri and Zainal Abidin, Zurina
(2014)
Effect of applied voltage on a new designed lab on a chip electrowetting actuation system.
Journal of Engineering Science and Technology, 9 (spec.).
pp. 115-124.
ISSN 1823-4690
Garmabdari, Rasoul and Shafie, Suhaidi and Garmabdari, Alireza and Jaafar, Haslina and Aram, Aisa Khoushniat
(2014)
Labview based flow rate monitoring and measurement algorithm for rotary encoder.
Journal of Engineering Science and Technology, 9 (spec.).
pp. 66-75.
ISSN 1823-4690
Wong, Zhen Yang and Ishak, Asnor Juraiza and Ahmad, Siti Anom and Chong, Yu Zheng
(2014)
Mechanical analysis of wearable lower limb exoskeleton for rehabilitation.
Journal of Engineering Science and Technology, 9 (spec.).
pp. 107-114.
ISSN 1823-4690
Mirfendereski, Shojaeddin and Abdul Wahab, Noor Izzri and Jasni, Jasronita and Othman, Mohammad Lutfi
(2014)
Mitigation of power system small signal oscillation using posicast controller and evolutionary programming.
Journal of Engineering Science and Technology, 9 (spec.).
pp. 39-50.
ISSN 1823-4690
Motoyama, K. and Hanamoto, T. and Yamada, H. and Mailah, Nashiren Farzilah and Misron, Norhisam
(2014)
Study of matrix converter based unified power flow controller applied PI-D controller.
Journal of Engineering Science and Technology, 9 (spec.).
pp. 30-38.
ISSN 1823-4690
Chin @ Hashim, Nur Fizura and Abd Aziz, Samsuzana and Saringat, Hafizan
(2014)
Effects of diesel contamination on capacitance values of crude palm oil.
Journal of Engineering Science and Technology, 9 (3).
pp. 286-292.
ISSN 1823-4690
Muhamad Nordin, Nik Nor Adilah and Karim, Roselina and Mohd Ghazali, Hasanah and Mohd Adzahan, Noranizan and Sultan, Muhammad Tauseef
(2014)
Effects of various stabilization techniques on the nutritional quality and antioxidant potential of brewer’s rice.
Journal of Engineering Science and Technology, 9 (3).
pp. 347-363.
ISSN 1823-4690
Hashim, Norhashila and Janius, Rimfiel and Abdul Rahman, Russly and Osman, Azizah and Shitan, Mahendran and Zude, Manuela
(2014)
Changes of backscattering parameters during chilling injury in bananas.
Journal of Engineering Science and Technology, 9 (3).
pp. 314-325.
ISSN 1823-4690
Ibrahim, Mohd Nordin and Sarker, Md. Sazzat Hossain and Ab. Aziz, Norashikin and Punan, Mohd Salleh
(2014)
Drying performance and overall energy requisite of industrial inclined bed paddy drying in Malaysia.
Journal of Engineering Science and Technology, 9 (3).
pp. 398-409.
ISSN 1823-4690
Sani, Nurul Atiqah and Taip, Farah Saleena and Mustapa Kamal, Siti Mazlina and Ab. Aziz, Norashikin
(2014)
Effects of temperature and airflow on volume development during baking and its influence on quality of cake.
Journal of Engineering Science and Technology, 9 (3).
pp. 303-313.
ISSN 1823-4690
Jaafar, Haslina and Zabidi, Muhamad Hidayat and Che Soh, Azura and Thong, Peng Hoong and Shafie, Suhaidi and Ahmad, Siti Anom
(2014)
Intelligent guidance parking system using modified Dijkstra's algorithm.
Journal of Engineering Science and Technology, 9.
pp. 132-141.
ISSN 1823-4690
Jamaluddin, Nurul Fauzani and Ahmad, Siti Anom and Mohd Noor, Samsul Bahari and Wan Hasan, Wan Zuha
(2014)
Low cost and wearable multichannel surface electromyography data acquisition system architecture.
Journal of Engineering Science and Technology, 9.
pp. 98-106.
ISSN 1823-4690
Bejo, Siti Khairunniza and Sudin, Nor Munira
(2014)
Mature and immature paddy identification using image processing technique.
Journal of Engineering Science and Technology, 9 (3).
pp. 326-333.
ISSN 1823-4690
Mohd Dom, Zanariah and Ling, Tau Chuan and Yusoff, Rozita
(2014)
Production of medium-chain acylglycerols by lipase esterification in packed bed reactor: process optimization by response surface methodology.
Journal of Engineering Science and Technology, 9 (3).
pp. 384-397.
ISSN 1823-4690
Deylami, Mahsa Ziabakhsh and Abdul Rahman, Russly and Tan, Chin Ping and Bakar, Jamilah and Olusegun, Lasekan
(2014)
Thermodynamics and kinetics of thermal inactivation of peroxidase from mangosteen (Garcinia mangotana L.) pericarp.
Journal of Engineering Science and Technology, 9 (3).
pp. 374-383.
ISSN 1823-4690
Guerrero, Pedro and Zainal Abedin, Nur Hanani and De La Caba, Koro
(2014)
The effect of plasticizer content and disaccharide type on the mechanical, barrier and physical properties of bovine gelatin-based films.
Journal of Engineering Science and Technology, 9 (3).
pp. 364-373.
ISSN 1823-4690
Wan Ab. Karim Ghani, Wan Azlina and Alias, Azil Bahari and Cliffe, K. R.
(2009)
Co-combustion of refuse derived fuel with coal in a fluidised bed combustor.
Journal of Engineering Science and Technology, 4 (1).
pp. 122-131.
ISSN 1823-4690
Abdul Rashid, Suraya and Sayed Mohamed Zain, Sharifah Mazrah and Yunus, Robiah and Ibrahim, Nor Azowa
(2009)
Growth of carbon nanotubes on carbon fibres and the tensile properties of resulting carbon fibre reinforced polypropylene composites.
Journal of Engineering Science and Technology, 4 (4).
pp. 400-408.
ISSN 1823-4690
Ahamad, Intan Salwani and Vassiliadis, Vassilios S.
(2008)
Application of a primal-dual interior point algorithm using exact second order information with a novel non-monotone line search method to generally constrained minimax optimization problems.
Journal of Engineering Science and Technology, 3 (1).
pp. 11-29.
ISSN 1823-4690
Md.Yasin, Faizah and Ahmadun, Fakhru'l-Razi and Mohd. Sidek, Roslina and Mat, Mohd Rosdi Naim
(2008)
Synthesis of carbon nanotubes for acetylene detection.
Journal of Engineering Science and Technology, 3 (1 ).
pp. 71-78.
ISSN 1823-4690
Tumin, Najua Delaila and Abdullah, Luqman Chuah and Zainuddin, Zawani and Abdul Rashid, Suraya
(2008)
Adsorption of copper from aqueous solution by Elais guineensis kernel activated carbon.
Journal of Engineering Science and Technology, 3 (2).
pp. 180-189.
ISSN 1823-4690
Ghasimi, Seyed Mohammad Dara and Idris, Azni and Ahmadun, Fakhru'l-Razi and Tey, Beng Ti and Chuah, Teong Guan
(2008)
Batch anaerobic treatment of fresh leachate from transfer station.
Journal of Engineering Science and Technology, 3 (3).
pp. 256-264.
ISSN 1823-4690
M., Khalid and Ali, Salmiaton and Abdullah, Luqman Chuah and C.T., Ratnam
(2008)
Effect of trimethylolpropane triacrylate (TMPTA) on the mechanical properties of palm fiber empty fruit bunch and cellulose fiber biocomposites.
Journal of Engineering Science and Technology, 3 (2).
pp. 153-162.
ISSN 1823-4690
Zainal Abidin, Zurina and Awang Biak, Dayang Radiah and Hafifudin, Norhafizah and Markx, Gerard
(2008)
Factors affecting dielectrophoretic separation of cells using high gradient electric field strength system.
Journal of Engineering Science and Technology, 3 (1).
pp. 30-39.
ISSN 1823-4690
M. A., Mohd Salleh and J., Abd Razak and N. A., Ibrahim and Ahmadun, Fakhru'l-Razi and Abdul Rashid, Suraya
(2008)
The influences of melt-compounding parameters on the tensile properties of low filler loading of untreated-MWCNTs polypropylene (PP) nanocomposites.
Journal of Engineering Science and Technology, 3 (1).
pp. 97-108.
ISSN 1823-4690