Browse by Journal Title

Li, F. and Choong, T. S. Y. and Abdullah, L. C. and Md Jamil, S. N. A . (2022) Investigation of glyphosate removal from aqueous solution using calcium peroxide. IOP Conference Series: Materials Science and Engineering, 1257 (1). art. no. 12041. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Haridan, N. A. and Yoshida, Hiroyuki and Mohd Salleh, Mohamad Amran and Siajam, Shamsul Izhar (2021) Carbonization of excess sewage sludge using superheated water vapor to produce fuel. IOP Conference Series: Materials Science and Engineering, 991. art. no. 012068. pp. 1-6. ISSN 1757-899X

Malhas, Yazeed and Muniandy, Ratnasamy and Hassim, Salihudin and Mohd Jakarni, Fauzan (2021) Establishing stress boundaries for various loading and pavement configuration. IOP Conference Series: Materials Science and Engineering, 1075 (2021). art. no. 012027. pp. 1-9. ISSN 1757-899X

Al-Humairi, S. F. I. and Alias, A. H. and Haron, N. A. and Hassim, S. and Mohd Jakarni, F. (2021) Sustainable pavement: a review on the usage of pavement as a mitigation strategy for UHI. IOP Conference Series: Materials Science and Engineering, 1075 (1). pp. 1-10. ISSN 1757-8981; ESSN: 1757-899X

Ansari, Anwaar Hazoor and Mohd Jakarni, Fauzan and Muniandy, Ratnasamy and Hassim, Salihudin (2021) A review on the application of natural rubber as asphalt modifier. IOP Conference Series: Materials Science and Engineering, 1075. art. no. 012031. pp. 1-12. ISSN 1757-899X

Kassim, Mohd Asyraf and Mat Adnan, Muhammad Faris Izaan and Tan, Keang Meng and Abu Bakar, Mohamad Hafizi and Lalung, Japareng and Mohamed, Mohd Shamzi (2020) Carbonic anhydrase (CA) activity by Chlorella sp. in immobilised matrix under carbon dioxide rich cultivation condition. IOP Conference Series: Materials Science and Engineering, 716. art. no. 012015. pp. 1-9. ISSN 1757-899X

M., Norhafana and M. M., Noor and F. Y., Hagos and Hairuddin, Abdul Aziz (2020) Diesel and various blending nanoparticles based diesel, fuel properties study. IOP Conference Series: Materials Science and Engineering, 788. art. no. 012061. pp. 1-9. ISSN 1757-8981; ESSN: 1757-899X

Koo, Siew Kim N. S. and Parmin, Nor Azizah and Hashim, Uda and Gopinath, Subash Chandra Bose and Rejali, Zulida and Mohd Jamil, Amilia Afzan and Uda, Muhammad Nur Aiman and Hong, V. C. (2020) Electrochemical DNA biosensor based on 30 nM gold nanoparticle modified electrode by electro less deposition for Human Papillomavirus (HPV) 18 E6 Region. IOP Conference Series: Materials Science and Engineering, 864. art. no. 012167. pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Hayawin, Zainal Nahrul and Ibrahim, Mohamad Faizal and Kamarudin, H. and J., Norfaizah and Mamat, Ropandi and Abdul Aziz, Astimar and Abd. Aziz, Suraini (2020) Production of a bioadsorbent from oil palm kernel shell, and application for pollutants and colour removal in palm oil mill effluent final discharge. IOP Conference Series: Materials Science and Engineering, 736. pp. 1-12. ISSN 1757-8981; ESSN: 1757-899X

Ravindran, Bavistra and Kassim, Mohd Asyraf and Mohamed, Mohd Shamzi (2020) Screening of medium constituents for the cultivation of Scenedesmus dimorphus UTEX 1237 using 2k factorial design approach. IOP Conference Series: Materials Science and Engineering, 716. pp. 1-8. ISSN 1757-8981

Pua'at, Ahmad Afifi and Matdaud, Zulkifli and Zhahir, Amzari and Ahmad, Mohamed Tarmizi and Hassan, Aziz (2019) Case study on aerodynamics stability of bixel wing-in-ground effect craft. IOP Conference Series: Materials Science and Engineering, 642. pp. 1-14. ISSN 1757-8981; ESSN: 1757-899X

Lee, Yit Leng and Ahmed, Osumanu Haruna and Abdul Wahid, Samsuri and Abdul Razak, Norawanis and Zulkeple, Nurul Nadzirah and Ismail, Ras Izzati and Makhtar, Nur Lailina (2019) Characteristics and heating values of pellets made from raw and charred rice residues-rubber tree twigs mixture. IOP Conference Series: Materials Science and Engineering, 551. art. no. 012104. pp. 1-4. ISSN 1757-8981; ESSN: 1757-899X

Mohamamad Sharif, Pshtiwan and Hairuddin, Abdul Aziz and As'arry, Azizan and Md Rezali, Khairil Anas and Mat Noor, Muhamad and Mohamed, Norhafana and Mossa, Muntasser Abdulabbas and Shareef, Sharaf (2019) International regulation of vehicle emissions control rules and its influence on academic engine development experimental study and vehicle manufacturing. IOP Conference Series: Materials Science and Engineering, 469. art. no. 012070. pp. 1-14. ISSN 1757-8981; ESSN: 1757-899X

Khairuddin, Nozieana and Muhamad, Ida Idayu and Wan Abdul Rahman, Wan Aizan and Siddique, Bazlul Mobin (2019) Microbial study of pH sensitive starch based film using agar diffusion method (zone inhibition assay). IOP Conference Series: Materials Science and Engineering, 607. art. no. 012007. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Mohamamad Sharif, Pshtiwan and Hairuddin, Abdul Aziz and As’arry, Azizan and Md Rezali, Khairil Anas and Mat Noor, Muhamad and Mohamed, Norhafana and Shareef, S. M. (2019) Nano gas bubbles dissolve in gasoline fuel and its influence on engine combustion performance. IOP Conference Series: Materials Science and Engineering, 469. art. no. 012062. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Matdaud, Zulkifli and Md Zhahir, Md Amzari and Ahmad Pua'at, Ahmad Afifi and Hassan, Aziz and Ahmad, Mohamed Tarmizi (2019) Stabilizing attitude control for mobility of wing in ground (WIG) craft - a review. IOP Conference Series: Materials Science and Engineering, 642 (1). art. no. 012005. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Hairuddin, Abdul Aziz and M. Tobib, Hasyuzariza and Zulkifli, Fariza and M. Noor, Muhamad (2019) The performance of a single-cylinder diesel engine fuelled with egusi based biodiesel. IOP Conference Series: Materials Science and Engineering, 469 (1). pp. 1-10. ISSN 1757-8981; ESSN: 1757-899X

M. Tobib, Hasyuzariza and Rostam, Hamzah and Mossa, Muntasser A. A. and Hairuddin, Abdul Aziz and Mat Noor, Muhamad (2019) The performance of an HCCI-DI engine fuelled with palm oil-based biodiesel. IOP Conference Series: Materials Science and Engineering, 469. pp. 1-9. ISSN 1757-8981; ESSN: 1757-899X

Hairuddin, Abdul Aziz and Mat Noor, Muhamad and Pshtiwan, M. Sharif and Mohamed, Norhafana and Hagos, F. Y. and Kadirgama, Kumaran and Ramasamy, D. and Rahman, M. M. and Alenezi, R. and Hoang, A. T. (2019) A review of the performance and emissions of nano additives in diesel fueled compression ignition-engines. IOP Conference Series: Materials Science and Engineering, 469 (1). art. no. 012035. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Akram, Omar Khasro and Mohammed Jamil, Nada F and Ismail, Sumarni and J Franco, Daniel and Graca, Andreia (2018) The importance of the heritage values of Al-Ukhaidhir palace, Karbala city, Iraq. IOP Conference Series: Materials Science and Engineering, 401 (1). art. no. 012030. pp. 1-7. ISSN 1757-8981; EISSN: 1757-899X

Meri, Nor Hidayah and Alias, Azil Bahari and Talib, Norhayati and Rashid, Zunaira and Wan Ab. Karim Ghani, Wan Azlina (2018) Comparison of H2S adsorption by two hydrogel composite (HBC) derived by Empty Fruit Bunch (EFB) biochar and Coal Fly Ash (CFA). IOP Conference Series: Materials Science and Engineering, 334 (1). pp. 1-9. ISSN 1757-8981; ESSN: 1757-899X

Abd. Aziz, Farah Nora Aznieta and Mohamed Omran, Mohamed Elhibir and Abu Bakar, Nabilah and Safiee, Nor Azizi (2018) Compressive strength and water absorption behaviour of self-curing fibre reinforced concrete. IOP Conference Series: Materials Science and Engineering, 431 (4). pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Dolah, Mohd Shahrizal and Md. Yusoff, Rosman and Abdul Hadi, Mohd Heideizul Jamal and Ishak, Muhammad Ikman (2018) Computational analysis in design and manufacturing processes. IOP Conference Series: Materials Science and Engineering, 2030 (9). pp. 1-6. ISSN 0094-243X; ESSN: 1551-7616

Abdulkareem Salih, Sarah and Ismail, Sumarni (2018) Criteria for public open space enhancement to achieve social interaction: a review paper. IOP Conference Series: Materials Science and Engineering, 291 (1). 1-May. ISSN 1757-8981; ESSN: 1757-899X

Jalil, Abdul Majid and Abdul Hamid, Hazandy and Md. Tahir, Paridah and Mohamad Ali, Nor Azah and Jamil, Mailina and Saidin, Saidatul Husni and Lias, Sahrim (2018) Determination of Agarwood volatile compounds from selected Aquilaria species plantation extracted by Headspace-Solid Phase Microextraction (HS-SPME) method. IOP Conference Series: Materials Science and Engineering, 368 (1). pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Khan, Mohammad Asim and Jawaid, Mohammad and Abdan, Khalina and Mohamed Nasir (2018) Effect of alkali treatments on physical and mechanical strength of pineapple leaf fibres. IOP Conference Series: Materials Science and Engineering, 290 (1). pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Mohamed @ Asa'ari, Ainun Zuriyati and Muhammad, K. I. and Halis, Rasmina and H. A., Hazwani and A., Sharmiza and Abu Kassim, Naziratulasikin and Latifah, J. (2018) Effect of chemical pretreatment on pulp and paper characteristics of bamboo gigantochloa scorthechinii kraft fibers. IOP Conference Series: Materials Science and Engineering, 368. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Ismail, Faris Syahiran and Mohamed @ Asa'ari, Ainun Zuriyati and Jawaid, Mohammad (2018) Effect of microcrystalline cellulose on the strength of oil palm empty fruit bunch paper. IOP Conference Series: Materials Science and Engineering, 368 (1). pp. 1-12. ISSN 1757-8981; ESSN: 1757-899X

Sunday Ugochukwu, Azunna and Abd. Aziz, Fara Nora Aznieta and Abu Bakar, Nabilah and Mohd Nasir, Noor Azline (2018) Mechanical properties of concrete with coconut shell as partial replacement of aggregates. IOP Conference Series: Materials Science and Engineering, 431 (3). pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Ramli, N and Mazlan, Norkhairunnisa and Ando, Yoshito and Leman, Z. (2018) Natural fiber for green technology in automotive industry: a brief review. IOP Conference Series: Materials Science and Engineering, 368 (2018). 1-Aug.

Abd Malek, Farah Hanan and Md. Tahir, Paridah and Jawaid, Mohammad (2018) Oil palm EFB/Kenaf fibre reinforced epoxy hybrid composites: dimension stability behaviours. IOP Conference Series: Materials Science and Engineering, 368. pp. 1-9. ISSN 1757-8981; ESSN: 1757-899X

Zainol Abidin, N. H. H. and Saadon, Syamimi and Abu Talib, Abd Rahim (2018) Parametric optimization and performance analysis of a waste heat recovery system using Organic Rankine Cycle (ORC). In: AEROTECH VII - Sustainability in Aerospace Engineering and Technology, 7 - 8 Aug. 2018, Putrajaya, Malaysia. (pp. 1-10).

Siakeng, R. and Jawaid, Mohammad and Ariffin, Hidayah and Salit, Mohd Sapuan (2018) Physical properties of coir and pineapple leaf fibre reinforced polylactic acid hybrid composites. IOP Conference Series: Materials Science and Engineering, 290. art. no. 012031. pp. 1-9. ISSN 1757-8981; ESSN: 1757-899X

Hussain, Intesar Razaq and Awang Biak, Dayang Radiah and Hameed Kamil, Faten and Md. Yasin, Faizah and Kamarudin, Suryani and Mohamed Yusoff, Hamdan (2018) Physical properties of reduced graphite oxide prepared via chemical reduction by using ammonia solution as a reducing agent. IOP Conference Series: Materials Science and Engineering, 454. art. no. 12136. pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Uyup, Mohd Khairun Anwar and Yusoh, Alia Syahirah and K., Tumirah and H., Hamdan and Md. Tahir, Paridah (2018) Properties of water-borne coating incorporate with nanoclay. IOP Conference Series: Materials Science and Engineering, 368. pp. 1-5. ISSN 1757-8981; ESSN: 1757-899X

Isma'ila, Mukhtar and Leman, Zulkiflle and Ishak, Mohamad Ridzwan and Zainudin, Edi Syams (2018) Thermal and physicochemical properties of sugar palm fibre treated with borax. IOP Conference Series: Materials Science and Engineering, 368. art. no. 012038. pp. 1-8. ISSN 1757-8981; EISSN: 1757-899X

Nasrudin, Nurul Reffa Azyan and Mazlan, Norkhairunnisa and Mohd Basri, Mohd Salahuddin and Mohamed Ariff, Azmah Hanim and Mohd. Nasir, Noor Azline (2018) Thermogravimetric analysis on rice husk ashes-based geopolymer paste. IOP Conference Series: Materials Science and Engineering, 405. art. no. 012014. pp. 1-7. ISSN 1757-8981; EISSN: 1757-899X

Bajuri, Farid and Mazlan, Norkhairunnisa and Ishak, Mohamad Ridzwan (2018) Water absorption analysis on impregnated kenaf with nanosilica for epoxy/kenaf composite. IOP Conference Series: Materials Science and Engineering, 405. art. no. 012013. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Marzuki, Omar Faruqi and Mohd Rafie, Azmin Shakrine and Romli, Fairuz Izzudin and Ahmad, Kamarul Arifin and Abdul Hamid, Mohd Faisal (2018) An overview of horizontal-axis Magnus wind turbines. IOP Conference Series: Materials Science and Engineering, 405. art. no. 012011. 1-Aug. ISSN 1757-8981; ESSN: 1757-899X

Abdul Hamid, Mohd Faisal and Gires, Ezanee and Mohd Harithuddin, Ahmad Salahuddin and Abu Talib, Abd Rahim and Mohd Rafie, Azmin Shakrine and Romli, Fairuz Izzuddin and Harmin, Mohammad Yazdi (2017) Coanda configured aircraft: a preliminary analytical assessment. IOP Conference Series: Materials Science and Engineering, 270. art. no. 012004. pp. 1-5. ISSN 1757-8981; ESSN: 1757-899X

Gooda Sahib, Muhammad Isfaaq and Leong, Shii Jang and Chia, Chen Ciang and Mustapha, Faizal (2017) Detection of fastener loosening in simple lap joint based on ultrasonic wavefield imaging. In: AEROS Conference 2017, 12 Dec. 2017, Shangri-La Hotel, Putrajaya, Malaysia. (pp. 1-7).

M. L., Nurul Hanira and Che Man, Hasfalina and M., Rashid and Abdullah, Luqman Chuah and Abdullah, A. M. (2017) Effect of dilution and operating parameters on ammonia removal from scheduled waste landfill leachate in a lab-scale ammonia stripping reactor. IOP Conference Series: Materials Science and Engineering, 206. art. no. 012076. pp. 1-10. ISSN 1757-8981

Chok, Ellyna Yee Ling and Abdul Majid, Dayang Laila Abang and Harmin, Mohammad Yazdi (2017) Effect of low velocity impact damage on the natural frequency of composite plates. IOP Conference Series: Materials Science and Engineering, 270 (2017). art. no. 012025. p. 43109. ISSN 1757-8981; ESSN: 1757-899X

Ahmad, So'bah and Anuar, Mohd Shamsul and Taip, Farah Saleena and Shamsudin, Rosnah and A. M., Siti Roha (2017) Effective moisture diffusivity and activation energy of rambutan seed under different drying methods to promote storage stability. IOP Conference Series: Materials Science and Engineering, 203. art. no. 012025. pp. 1-8. ISSN 1757-8981; ESSN: 1757-899X

Mohd Nor, Elya and Mohd Noor, Samsul Bahari and Bahiki, Muhammad Rijaluddin and Md Ali, Syaril Azrad (2017) Implementation of high-gain observer on low-cost fused IR- OS sensor embedded in UAV system. In: AEROS Conference 2017, 12 Dec. 2017, Putrajaya, Malaysia. (pp. 1-6).

Md. Salleh, Mohd. Norizam and Haron, Nuzul Azam and Mohd Shafri, Helmi Zulhaidi and Abdullah, Abdul Aziz and Ahmad, Nadzrol Fadzilah (2017) Literature review of the benefits and obstacle of Horizontal Directional Drilling. In: Global Congress on Construction, Material and Structural Engineering 2017 (GCoMSE2017), 28-29 Aug. 2017, Johor Bahru, Malaysia. (pp. 1-9).

Alias, M. S. and Rafie, A. S. Mohd and Marzuki, O. F. and Hamid, M. F. Abdul and Chia, C. C. (2017) Two dimensional numerical analysis of aerodynamic characteristics for rotating cylinder on concentrated air flow. IOP Conference Series: Materials Science and Engineering, 270. art. no. 012003. pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Hashim, N. and Majid, D. L. and Uda, N. and Zahari, R. and Yidris, N. (2017) Vacuum infusion method for woven carbon/Kevlar reinforced hybrid composite. IOP Conference Series: Materials Science and Engineering, 270 (1). art. no. 012021. pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Bottcher, M. and Eshghi, S. and Varatharajoo, Renuganth (2016) Testing and validation of a Β; algorithm for cubesat satellites. IOP Conference Series: Materials Science and Engineering, 152. pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Othman, M. S. and Chun, O. T. and Harmin, M. Y. and Romli, F. I. (2016) Aeroelastic effects of a simple rectangular wing-box model with varying rib orientations. IOP Conference Series: Materials Science and Engineering, 152. pp. 1-5. ISSN 1757-8981; ESSN: 1757-899X

Salami, E. and Ganesan, P. B. and Ward, T. A. and Viyapuri, R. and Romli, F. I. (2016) Design and mechanical analysis of a 3D-printed biodegradable biomimetic micro air vehicle wing. IOP Conference Series: Materials Science and Engineering, 152 (1). pp. 1-7. ISSN 1757-899X

Ali, M. I. F. and Abdullah, E. J. (2016) Design of automatic rotor blades folding system using NiTi shape memory alloy actuator. IOP Conference Series: Materials Science and Engineering, 152 (1). pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Cheong, M. K. and Md Ali, Syaril Azrad and Azrad, S. (2016) Development of collision avoidance system for useful UAV applications using image sensors with laser transmitter. IOP Conference Series: Materials Science and Engineering, 152 (1). pp. 1-7. ISSN 1757-8981; ESSN: 1757-899X

Lateran, S. and Sedan, M. F. and Mohd Harithuddin, Ahmad Salahuddin and Md Ali, Syaril Azrad (2016) Development of unmanned aerial vehicle (UAV) based high altitude balloon (HAB) platform for active aerosol sampling. IOP Conference Series: Materials Science and Engineering, 152 (1). pp. 1-14. ISSN 1757-899X

Ramli, M. S. and Abu Talib, Abd. Rahim and Harmin, Mohammad Yazdi and Mohd Saiah, H. R. (2016) Effect of multiple jet impingement plate configurations on Reynolds Number in a pipe. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-14).

Penjumras, Patpen and Abdul Rahman, Russly and A. Talib, Rosnita and Abdan, Khalina (2016) Effect of silanecoupling agent on properties of biocomposites based on poly(lactic acid)and durian rind cellulose. In: 2016 Global Conference on Polymer and Composite Materials (PCM 2016), 20- 23r May 2016, Hangzhou, China. (pp. 1-12).

W. N., W. Rohizan and Mohd.Rafie, Azmin Shakrine and Harmin, Mohammad Yazdi and Ciang, Chia Chen (2016) Effect of surface roughness on helicopter main rotor blade. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-8).

Karunakaran, S. and Abang Abdul Majid, Dayang Laila and Mohd Tawil, M. Lufti (2016) Flammability of self-extinguishing kenaf/ABS nanoclays composite for aircraft secondary structure. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-11).

Ogunwa, T. T. and Abdullah, Ermira Junita (2016) Flight dynamics and control modelling of damaged asymmetric aircraft. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-18).

Romli, Fairuz Izzudin and Abdul Rahman, K. and Ishak, F. D. (2016) In-flight food delivery and waste collection service: the passengers perspective and potential improvement. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-7).

Liew, C. L. and Abu Talib, Abd. Rahim and Jacobs, Ronald Lynn (2016) Malaysian aviation technologist promotion to managerial role: an empirical overview. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-9).

Manan, Nor Hafizah and Abang Abdul Majid, Dayang Laila and Romli, Fairuz Izzuddin (2016) Mould design and manufacturing considerations of honeycomb biocomposites with transverse fibre direction for aerospace application. In: 6th Innovation in Aerospace Engineering and Technology (AEROTECH VI), 8-9 Nov. 2016, Kuala Lumpur, Malaysia. (pp. 1-7).

Montazer, Elham and Mirzaei, Masoud and Salami, Erfan and Ward, Thomas Arthur and Romli, Fairuz Izzudin and Kazi, Salim Newaz (2016) Optimization of a synthetic jet actuator for flow control around an airfoil. In: 6th Innovation in Aerospace Engineering and Technology (AEROTECH VI), 8-9 Nov. 2016, Kuala Lumpur, Malaysia. (pp. 1-12).

Mohd Harithuddin, Ahmad Salahuddin (2016) Quasi-satellite system for leader-follower spacecraft formation. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016 , Kuala Lumpur, Malaysia. (pp. 1-9).

Hussein, A. M. H. and Abang Abdul Majid, Dayang Laila and Abdullah, Ermira Junita (2016) Shape memory alloy actuation effect on subsonic static aeroelastic deformation of composite cantilever plate. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8–9 Nov 2016, Kuala Lumpur, Malaysia. (pp. 1-10).

Mohammed, I. and Abu Talib, A. R. and H. Sultan, M. T. and Saadon, S. (2016) Temperature and heat flux measurement techniques for aeroengine fire test: a review. IOP Conference Series: Materials Science and Engineering, 152. pp. 1-12. ISSN 1757-8981; ESSN: 1757-899X

Mohammed, K. A. and Abu Talib, A. R. and Abdul Aziz, N. and Ahmed, K. A. (2016) Three dimensional numerical investigations on the heat transfer enhancement in a triangular facing step channels using nanofluid. IOP Conference Series: Materials Science and Engineering, 152 (1). pp. 1-9. ISSN 1757-8981

Saadon, S. and Abu Talib, A. R. (2016) An analytical study on the performance of the organic rankine cycle for turbofan engine exhaust heat recovery. IOP Conference Series: Materials Science and Engineering, 152 (1). pp. 1-9. ISSN 1757-899X

Zin, M. H. and Razzi, M. F. and Othman, S. and Liew, K. and Abdan, K. and Mazlan, N. (2016) A review on the fabrication method of bio-sourced hybrid composites for aerospace and automotive applications. IOP Conference Series: Materials Science and Engineering, 152 (1). pp. 1-13. ISSN 1757-899X

Jaafar, Mohd Saleh and Muhammad Rashid, Raizal Saifulnaz and Kohnehpooshi, Omid and Abdulrazeg, Aeid Ali and Noorzaei, Jamaloddin (2011) 3D numerical models for reinforced concrete components. IOP Conference Series: Materials Science and Engineering, 17 (1). 012036. ISSN 1757-9881

Afshar, Reza and Ali, Aidy and Sahari, Barkawi and Bayat, Mehdi (2011) Axial crush of the tubular structure with various cee-shaped cross-sections. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012039. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Sobri, Shafreeza and Ali, A. H. M. (2011) Chemical characterisation of printed circuit board wastewater. IOP Conference Series: Materials Science and Engineering, 17 (012021). pp. 1-5. ISSN 1757-899X

Hussein, Zinah Rajab and O. K. Rahmat, Rahmita Wirza and Abdullah, Lili Nurliyana and Saripan, M. Iqbal and Dimon, Mohd Zamrin (2011) Contour extraction of echocardiographic images based on pre-processing. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012042. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah and Hejazi, Farzad and Kojouri, Samira Jilani and Chieng, C. Y. and Noorzaei, Jamaloddin (2011) Effect of soft story on structural response of high rise buildings. IOP Conference Series: Materials Science and Engineering, 17 (1). ISSN 1757-8981

Abd. Aziz, Sidek and Zakaria, Azmi and Amin Matori, Khamirul and Mohamed Kamari, Halimah and S., Rosmawati (2011) Elastic constant of (TeO2)90(AlF3)10-x(ZnO)x Zinc Oxyfluorotellurite glasses. IOP Conference Series: Materials Science and Engineering, 17 (012031). pp. 1-6. ISSN 1757-899X

Abang Ali, Abang Abdullah and Jaafar, Mohd Saleh and Al-Gorafi, Mohammed A. and Othman, Ismail and Anwar, Mohammed Parvez (2011) Externally prestressed monolithic and segmental concrete beams under torsion: A comparative finite element study. IOP Conference Series: Materials Science and Engineering, 17 (1). 012041. ISSN 1757-8981

Che Lah, Nur Azida and Ali, Aidy (2011) Fatigue strength improvement of MIG-welded joint by shot peening. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012001. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Eslamian, Saeed and Sahari, Barkawi and Ali, Aidy and Mahdi, Elsadig and Hamouda, Abdel Magid Salem (2011) Microscopic study of 5083-H321 aluminium alloy under fretting fatigue condition. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012026. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Shahrjerdi, Ali and Mustapha, Faizal and Bayat, Mehdi and Salit, Mohd Sapuan and Zahari, Rizal and M. M., Shahzamanian (2011) Natural frequency of F.G. rectangular plate by shear deformation theory. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012008. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

J. N., Farhana Ayuni and Mohamed Kamari, Halimah and Talib, Zainal Abidin and Abd. Aziz, Sidek and Wan Yusoff, Wan Mohamad Daud and Matori, Khamirul Amin and Abd. Wahab, Zaidan (2011) Optical properties of ternary TeO2-B2O3-ZnO glass system. IOP Conference Series: Materials Science and Engineering, 17 (012027). p. 7. ISSN 1757-899X

Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah and Noorzaei, Jamaloddin and Ghatee, Peyman and Ibrahim, Azmi (2011) Plain concrete linearized stiffness diminution modeling subjected to different stresses-srain relationship models. IOP Conference Series: Materials Science and Engineering, 17 (1). 012037. ISSN 1757-8981

Jaafar, Mohd Saleh and Noorzaei, Jamaloddin and Thanoon, Waleed Abdulmalik and Abdulrazeg, Aeid Ali and Kohnehpooshi, Omid (2011) Soil structure interaction for integral abutment bridge using spring analogy approach. IOP Conference Series: Materials Science and Engineering, 17 (1). 012035. ISSN 1757-8981

Resul, Muhammad Faiz M. and Mohd Ghazi, Tinia Idaty and Idris, Azni (2011) Temperature dependence on the synthesis of jatropha biolubricant. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012032. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Oshkour, Azim Ataollahi and Sahari, Barkawi and Ali, Aidy (2011) Variation of stress intensity factor through the thickness of plate. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012004. pp. 1-12. ISSN 1757-8981; ESSN: 1757-899X

Jaafar, Mohd Saleh and Noorzaei, Jamaloddin and Pour, P. Moradi and Karisiddappa, (2011) A comparative study between codes of spectrum for a single degree of freedom (sdof) system in two different hazardous regions. IOP Conference Series: Materials Science and Engineering, 17 (1). 012033. ISSN 1757-8981

Sidhu, R. S. and Ali, Aidy (2010) Fatigue life of automotive rubber jounce bumper. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Mohamad, Nurhaniza and Mohd Atan, Kamel Ariffin and Ali, Aidy and Mustapha, Faizal and Abdul Wahab, Noraini (2010) Finite element analysis of composites materials for aerospace applications. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Wirawan, Riza and Salit, Mohd Sapuan and Yunus, Robiah and Abdan, Khalina (2010) Flexural properties of sugarcane bagasse pith and rind reinforced poly(vinyl chloride). IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Ishak, Mohamad Ridzwan and Leman, Zulkiflle and Salit, Mohd Sapuan and Edeerozey, A. M. M. and Othman, Intan Sharhida (2010) Mechanical properties of kenaf bast and core fibre reinforced unsaturated polyester composites. IOP Conference Series: Materials Science and Engineering, 11 (1). art. no. 012006. pp. 1-6. ISSN 1757-899X

Samad, M. S. A. and Ali, Aidy (2010) Simulation work of fatigue life prediction of rubber automotive components. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Ali, Aidy and Ahmad, Desa and Abdan, Khalina (2010) Thermoplastic impact property improvement in hybrid natural fibre epoxy composite bumper beam. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Bachtiar, Situs Dandi and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abdan, Khalina and Mohd Dahlan, Khairul Zaman (2010) The tensile properties of single sugar palm (Arenga pinnata) fibre. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X