Browse by Journal Title

Abdullah, Ahmed Shakir Al-Hiti and Sahbudin, Ratna Kalos Zakiah and Hashim, Fazirulhisyam and M., Zulkiflee (2018) Design and performance analysis of routing protocols over WiMAX. ARPN Journal of Engineering and Applied Sciences, 13 (11). 3587 - 3593. ISSN 1819-6608

Alghrairi, Mokhalad Khaleel and Sulaiman, Nasri and Mohd Sidek, Roslina and Mutashar, Saad (2016) Optimization of spiral circular coils for bio-implantable micro-system stimulator at 6.78 MHz ISM band. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7046-7054. ISSN 1819-6608

Amir, Muhammad Azrai and Toha, Siti Fauziah and Aris, Ishak and Md. Yusof, Hazlina (2016) Experimental analysis of human lumbar vertebrae during prolonged distance driving. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 433-438. ISSN 1819-6608

Abdulkarem, Mohammed and Latip, Rohaya (2015) Data transmission performance analysis in cloud and grid. ARPN Journal of Engineering and Applied Sciences, 10 (18). pp. 8451-8457. ISSN 1819-6608

Abu Bakar, Azreena and Abdullah, Rusli (2015) A framework of secure KMS with RBAC implementation. ARPN Journal of Engineering and Applied Sciences, 10 (3). pp. 1051-1059. ISSN 1819-6608

Buba, Sani Dahiru and Wan Ahmad, Wan Fatinhamamah and Ab Kadir, Mohd Zainal Abidin and Gomes, Chandima and Jasni, Jasronita and Osman, Miszaina (2016) Reduction of earth grid resistance by addition of earth rods to various grid configurations. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4533-4538. ISSN 1819-6608

Choo, Hong Ning and Abdul Latiff, Nurul Adilah and Varahram, Pooria and Mohd Ali, Borhanuddin (2019) Optimized memory polynomial with binomial reduction in digital pre-distortion for wireless communication systems. ARPN Journal of Engineering and Applied Sciences, 14 (16). pp. 2929-2936. ISSN 1819-6608

Cheong, Ming Yin and Wiriadidjaja, Surjatin and Abd Majid, Dayang Laila and Romli, Fairuz Izzudin and Mohd Rafie, Azmin Shakrine and Zhahir, Amzari (2015) Review on the cost and performance of a wige craft a commercialization prospective. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10027-10033. ISSN 1819-6608

Che Cob, Zaihisma and Abdullah, Rusli and Risidi, Hanim and Mohd Nor, Mohd Zali (2015) Preliminary study on semantic knowledge management model collaborative learning. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 442-450. ISSN 1819-6608

Fitrianto, Anwar and Low, Yen Chin (2016) Assessing normality for data with different sample sizes using SAS, Minitab and R. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10845-10850. ISSN 1819-6608

Fitrianto, Anwar and Haur, Low Chuan (2016) Rank order outlier (ROO) plots to detect possible outliers in unreplicated 2k completely randomized factorial designs: numerical example. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10775-10779. ISSN 1819-6608

Ghazali, Dewi Puspa Suhana and Latip, Rohaya and Hussin, Masnida and Abd Wahab, Mohd Helmy (2015) A review data cube analysis method in big data environment. ARPN Journal of Engineering and Applied Sciences, 10 (19). pp. 8525-8532. ISSN 1819-6608

Haron, Hazlina and Abd Ghani, Abdul Azim and Haron, Hazliza (2015) A conceptual model to manage lexical ambiguity in Malay textual requirements. ARPN Journal of Engineering and Applied Sciences, 10 (3). pp. 1405-1412. ISSN 1819-6608

Hamed, Abdalla F. and Megat Ahmad, Megat Mohamad Hamdan and Sahari, Barkawi and Salit, Mohd Sapuan (2008) Experimental characterization of filament wound glass/epoxy and carbon/epoxy composite materials. ARPN Journal of Engineering and Applied Sciences, 3 (4). pp. 76-87. ISSN 1819-6608

Ibrahim, O. J. and Ismail, Alyani and Noordin, Nor Kamariah and Adam, H. (2015) Chipless radio frequency identification tag with high encoding capacity based on three coding levels. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9854-9859. ISSN 1819-6608; ESSN: 2305-493X

Mohamad Nor, Ahmad Redzman and Romli, Fairuz Izzuddin (2023) Analysis of a new standing passenger seat design for commercial transport aircraft. ARPN Journal of Engineering and Applied Sciences, 18 (6). 640 - 647. ISSN 1819-6608

Mustapa, Mokhzanni and Sallehudin, Nor Jannah and Mohamed, Mohd Shamzi and Mohammad Noor, Normawaty and Ahmad Raus, Raha (2016) Decontamination of Chlorella sp. culture using antibiotics and antifungal cocktail treatment. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 104-109. ISSN 1819-6608

Marzuki, Omar Faruqi and Mohd Rafie, Azmin Shakrine and Romli, Fairuz Izzudin and Ahmad, Kamarul Arifin (2015) An experimental investigation on the effect of surface roughness on the performance of Magnus wind turbine. ARPN Journal of Engineering and Applied Sciences, 10 (20). pp. 9725-9729. ISSN 1819-6608

Mohamad, Roslina and Harun, Harlisya and Mokhtar, Makhfudzah and Wan Adnan, Wan Azizun and Mohamad Anas, Nuzli and Dimyati, Kaharudin (2015) Choosing the right threshold for cross-entropy-based stopping criteria. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 613-618. ISSN 1819-6608

Muniandy, Ratnasamy and Aburkaba, Eltaher Elzarroug and Hamid, Hussain and Yunus, Robiah (2009) An initial investigation of the use of local industrial wastes and by-products as mineral fillers in stone mastic asphalt pavements. ARPN Journal of Engineering and Applied Sciences, 4 (3). pp. 54-63. ISSN 1819-6608

N. F., Nabila and Basir, Nurlida and Mamat, Ali (2015) Synonymous non-taxonomic relations extraction. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 402-406. ISSN 1819-6608

Othman, Muhammad Murtadha and Harun, Mohd Hafez Hilmi and Salim, Nur Ashida and Othman, Mohammad Lutfi (2015) Sequential process of feature extraction methods for artificial neural network in short term load forecasting. ARPN Journal of Engineering and Applied Sciences, 10 (19). pp. 8830-8838. ISSN 1819-6608

Rashed, Musaab K. and Mohd Salleh, Mohamad Amran and Abdulbari, Hayder A. and Shah Ismail, M. Halim (2016) Active drag reduction in hydrocarbon media using rotating disk apparatus. ARPN Journal of Engineering and Applied Sciences, 11 (21). 12538- 12544. ISSN 1819-6608

Rafukka, Ibrahim Abdullahi and Sahari, Barkawi and Abdul Aziz, Nuraini and Arumugam, Manohar (2016) Child dummy finite element models development: a review. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6649-6656. ISSN 1819-6608

Ramli, Azlinda and Ismail, Alyani and Alhawari, Adam Reda Hasan and Mahdi, Mohd Adzir (2016) The effect of the metamaterial superstrate to the vertically stacked bandpass filter antenna performances. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3147-3149. ISSN 1819-6608

Rambabu, Rethnaraj and Bahiki, Muhammad Rijaluddin and Md Ali, Syaril Azrad (2015) Relative position-based collision avoidance system for swarming UAVs using multi-sensor fusion. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10012-10017. ISSN 1819-6608

Syed Ismail, Sharifah Norkhadijah and Mohamad, Nurul Syifaa and Karuppiah, Karmegam and Zainal Abidin, Emilia and Rasdi, Irniza and Praveena, Sarva Mangala (2017) Heavy metals content in low-priced toys. ARPN Journal of Engineering and Applied Sciences, 12 (5). pp. 1499-1509. ISSN 1819-6608

Shahril, A. and Samin, Razali and J. M., Juraidi and Daut, Jufriadi (2015) Structural analysis of brake disc using dynamic simulation. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7805-7808. ISSN 1819-6608

Shanmugam, Mohana and Jusoh, Yusmadi Yah and Nor, Rozi Nor Haizan and A. Jabar, Marzanah (2015) A theoretical extension and empirical investigation for continuance use in social networking sites. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17730-17739. ISSN 1819-6608

Shah, Ajmal Hussain and Begum, Suriyya and Thangasamy, Veeraiyah and Kamsani, Noor Ain (2014) Enhanced ultrawideband (UWB) micro-strip on-body wearable antenna. ARPN Journal of Engineering and Applied Sciences, 9 (9). pp. 1535-1539. ISSN 1819-6608

Sadrolhosseini, Amir Reza and Abd. Moksin, Mohd Maarof and Mat Yunus, Wan Mahmood and Talib, Zainal Abidin (2010) Surface plasmon resonance determination of methanol concentration during alkaline transestrification. ARPN Journal of Engineering and Applied Sciences, 5 (9). pp. 54-57. ISSN 1819-6608

Tengku Mohd, Tengku Azman and Hassan, Mohd Khair and Aris, Ishak and Che Soh, Azura and K. Ibrahim, B. S. K. and Hat, Mohd Kamal (2015) Simulation based study of electric vehicle parameters. ARPN Journal of Engineering and Applied Sciences, 10 (19). pp. 8541-8546. ISSN 1819-6608

Varatharajoo, Renuganth and Ismail, Zuliana (2015) Reaction wheel configurations for high and middle inclination orbits. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10034-10042. ISSN 1819-6608

Yousif, Rana Amir and Muniandy, Ratnasamy and Hassim, Salihudin and Mohd Jakarni, Fauzan (2019) Influence of polymer and aged binder on the physical and rheological properties. ARPN Journal of Engineering and Applied Sciences, 14 (8). pp. 1524-1536. ISSN 1819-6608