Items where Author is "Samin, Razali "
![]() | Up a level |
Group by: Item Type | No Grouping
Number of items: 21.
Article
Anugerah, Adhe Rizky and Ahmad, Siti Azfanizam and Samin, Razali and Samdin, Zaiton and Kamaruddin, Norfaryanti
(2021)
Modified failure mode and effect analysis to mitigate sustainable related risk in the palm oil supply chain.
Advances in Materials and Processing Technologies, 8 (2).
pp. 2229-2243.
ISSN 2374-068X; ESSN: 2374-0698
Samin, Razali and Nuawi, Mohd Zaki and Azmi, Farhan Akmal and Mohamed Haris, Sallehuddin and A. Ghani, Jaharah
(2019)
Research of chatter suppression in turning operation with process damping using stability lobe diagram.
International Journal of Innovative Technology and Exploring Engineering, 8 (12 spec. 2).
pp. 539-543.
ISSN 2278-3075
Samin, Razali and Nuawi, Mohd Zaki and A. Ghani, Jaharah and Mohamed. Haris, Sallehuddin
(2019)
Research and modelling of surface roughness, cutting forces and I-kaz coefficients for S42C in turning using response surface methodology.
International Journal of Innovative Technology and Exploring Engineering, 8 (12 spec. 2).
pp. 608-620.
ISSN 2278-3075
Samin, Razali and Hao, N. C. and As'arry, Azizan and Md Rezali, Khairil Anas and Nuawi, Mohd Zaki
(2018)
Effect of disc brake squeal with respect to thickness variation: Experimental Modal Analysis.
Journal of Mechanical Engineering, 6 (1 spec.).
33 - 44.
ISSN 1823- 5514; ESSN: 2550-164X
As'arry, Azizan and Rezali, Khairil Anas Md and Jalil, Nawal Aswan Abdul and Samin, Razali and Zulkefli, Zamir Aimaduddin and Zain, Mohd Zarhamdy Md.
(2017)
Tremor suppression for 4-DOFs biodynamic hand model using genetic algorithm.
International Journal of Advanced Mechatronic Systems, 7 (3).
151 - 157.
ISSN 1756-8412; ESSN: 1756-8420
Md Rezali, Khairil Anas and As'arry, Azizan and Zulkefli, Zamir Aimaduddin and Samin, Razali and Abdul Jalil, Nawal Aswan
(2016)
Predicting the transmissibility of a glove material to the palm using a simple lumped parameter model of the hand and the glove.
Jurnal Teknologi , 78 (6-10).
pp. 17-22.
ISSN 0127-9696; ESSN: 2180-3722
Shahril, A. and Samin, Razali and J. M., Juraidi and Daut, Jufriadi
(2015)
Structural analysis of brake disc using dynamic simulation.
ARPN Journal of Engineering and Applied Sciences, 10 (17).
pp. 7805-7808.
ISSN 1819-6608
Dawood, Sarmad Daood Salman and Inayatullah, Othman and Samin, Razali
(2015)
Computational study of the effect of using open isogrids on the natural frequencies of a small satellite structure.
Acta Astronautica, 106.
pp. 120-138.
ISSN 0094-5765; ESSN: 1879-2030
Yamchello, Hamed Tamjid and Samin, Razali and Tamjidyamcholo, Alireza and Rashidi, Alireza
(2014)
Prioritizing lean manufacturing practices in small to medium enterprises by applying TOPSIS in fuzzy environment.
Advanced Materials Research, 903.
pp. 438-443.
ISSN 1022-6680; ESSN: 1662-8985
Baharudin, B.T Hang Tuah and Ng, Kooi Pin and Sulaiman, Shamsuddin and Samin, Razali and Ismail, Mohd Shahrom
(2014)
Temperature distribution of micro milling process due to uncut chip thickness.
Advanced Materials Research, 939.
pp. 214-221.
ISSN 1022-6680; ESSN: 1662-8985
Yamchello, Hamed Tamjid and Samin, Razali and Tamjidyamcholo, Alireza and Bareji, Pooyan and Beheshti, Abolghasem Kourank
(2014)
A review of the critical success factors in the adoption of lean production system by small and medium sized enterprises.
Applied Mechanics and Materials, 564.
pp. 627-631.
ISSN 1660-9336; ESSN: 1662-7482
Nouri, Hossein and Tang, Sai Hong and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Samin, Razali
(2013)
Development and tuning of bacteria foraging optimization algorithm on cell formation in cellular manufacturing system.
Journal of Automation and Control Engineering, 1 (1).
pp. 36-39.
ISSN 2301-3702
Nouri, Hossein and Tang, Sai Hong and Baharudin, B. T. Hang Tuah and Mohd Ariffin, Mohd Khairol Anuar and Samin, Razali
(2013)
Metaheuristic techniques on cell formation in cellular manufacturing system.
Journal of Automation and Control Engineering, 1 (1).
pp. 49-54.
ISSN 2301-3702
Tang, Sai Hong and Sulaiman, Shamsuddin and Samin, Razali and Teo, Hiu Hong and Khaksar, Weria
(2013)
Development of an Educational Robotic Training Kit.
Advanced Science Letters, 19 (11).
pp. 3304-3306.
ISSN 1936-6612
Motlagh, Omid and Tang, Sai Hong and Ismail, Napsiah and Ramli, Abdul Rahman and Samin, Razali
(2009)
A new path estimation strategy for predicting blind persons' motion in indoor environments.
Journal of Asian Architecture and Building Engineering, 8 (2).
pp. 371-377.
ISSN 1346-7581; ESSN: 1347-2852
Sulaiman, Shamsuddin and Mohd Sayuti, and Samin, Razali
(2008)
Mechanical properties of the as-cast quartz particulate reinforced LM6 alloy matrix composites.
Journal of Materials Processing Technology, 201 (1-3).
pp. 731-735.
ISSN 0924-0136
Motlagh, O. and Tang, Sai Hong and Ismail, Napsiah and Ramli, Abdul Rahman and Samin, Razali
(2008)
A novel approach to human motion estimation with applications in human-robot safety.
International Journal of Engineering and Technology, 5 (2).
pp. 129-137.
ISSN 1823-1039
Tang, Sai Hong and Tan, Y. J. and Salit, Mohd Sapuan and Sulaiman, Shamsuddin and Ismail, Napsiah and Samin, Razali
(2007)
The use of Taguchi method in the design of plastic injection mould for reducing warpage.
Journal of Materials Processing Technology, 182 (1-3).
pp. 418-426.
ISSN 0924-0136; ESSN: 1873-4774
Conference or Workshop Item
Homayouni, Seyed Mahdi and Tang, Sai Hong and Ismail, Napsiah and Mohd Ariffin, Mohd Khairol Anuar and Samin, Razali
(2009)
A hybrid genetic-heuristic algorithm for scheduling of automated guided vehicles and quay cranes in automated container terminals.
In: 39th International Conference on Computers & Industrial Engineering (CIE39), 6-8 July 2009, University of Technology of Troyes, France. (pp. 96-101).
Ismail, Napsiah and Abdul Rahman, Khairuddin and Md Yusof, Juraina and Mohd Kassim, Muhammad Saufi and Tang, Sai Hong and Samin, Razali
(2005)
Vision-based 3D part recognition system for flexible manufacturing cell.
In: International Advanced Technology Congress: Conference on Intelligent Systems and Robotics, 6-8 Dec. 2005, Putrajaya, Malaysia. .
Thesis
Samin, Razali
(2002)
Robot Manipulation Trajectory Planning in Complex Position.
Masters thesis, Universiti Putra Malaysia.