Items where Author is "Mustapha, Faizal "

Rahim, Sharafiz Abdul and Manson, Graeme and Mustapha, Faizal (2024) Damage detection of the Jabiru’s aircraft wing under operational fuel loading conditions using neural network. Journal of Aeronautics, Astronautics and Aviation, 56 (1). pp. 1-7. ISSN 1990-7710

Abdul Rahim, Sharafiz and Manson, Graeme and Mustapha, Faizal (2024) Damage detection of the jabiru's aircraft wing under operational fuel loading conditions using neural network. Journal of Aeronautics, Astronautics and Aviation, 56 (1). pp. 1-10. ISSN 1990-7710

Abdullah, Mohd Náim and Mustapha, Faizal and Mustapha, Mazli and Khan, Tabrej and Sebaey, Tamer A (2024) Study on adhesive and microstructure properties of rice husk ash-based geopolymer hybrid alkyd coating. Journal of Natural Fibers, 21 (1). art. no. 2317427. pp. 1-14. ISSN 1544-0478; ESSN: 1544-046X

Abdullah, Mohd Na’im and Mustapha, Faizal and Yusof, Nurul ‘Izzati and Khan, Tabrej and Sebaey, Tamer A. (2024) Thermal properties and drying shrinkage performance of palm kernel shell ash and rice husk ash-based geopolymer concrete. Materials, 17 (6). art. no. 1298. pp. 1-21. ISSN 1996-1944

Mohamad, Nurhaniza and Mohd Ariffin, Mohd Khairol Anuar and Mustapha, Faizal and Baharudin, B.T Hang Tuah (2023) Challenges in machining composite materials: impact of machining parameters on cutting force. International Journal of Modern Manufacturing Technologies, 15 (3). 98 - 106. ISSN 2067–3604

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle (2023) A review of natural fiber-based filaments for 3D Printing: filament fabrication and characterization. Materials, 16 (11). art. no. 4052. pp. 1-16. ISSN 1996-1944

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle and Irianto, Unfound (2023) Mechanical, thermal and physical characteristics of oil palm (Elaeis Guineensis) fiber reinforced thermoplastic composites for FDM – Type 3D printer. Polymer Testing, 120. art. no. 107972. pp. 1-11. ISSN 0142-9418; ESSN: 1873-2348

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle (2023) Investigation of ABS–oil palm fiber (Elaeis guineensis) composites filament as feedstock for fused deposition modeling. Rapid Prototyping Journal, 29 (5). 897 - 909. ISSN 1355-2546; ESSN: 1758-7670

Ismail, Asmawi and Othman, Nurul Husna and Mustapha, Mazli and Mohamed Saheed, Mohamed Shuaib and Abdullah, Zaki and Muhammed, Musa and Mohamed Saat, Asmalina and Mustapha, Faizal (2022) Mechanical performance and corrosion behaviour of diffusion-bonded A5083 aluminium and A36 mild steel with gallium interlayer. Materials, 15 (18). art. no. 6331. pp. 1-22. ISSN 1996-1944

Abdullah, Mohd Na’im and Mustapha, Faizal and Ahmad, Kamarul Arifin and Mustapha, Mazlina and Khan, Tabrej and Singh, Balbir and Sebaey, Tamer A. (2022) Effect of different pre-treatment on the microstructure and intumescent properties of rice husk ash-based geopolymer hybrid coating. Polymers, 14 (11). art. no. 2252. pp. 1-18. ISSN 2073-4360

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle and Anak Lukista, Debby Dyne and Irianto and Ghazali, Ihwan (2022) Application of Taguchi method to optimize the parameter of Fused Deposition Modeling (FDM) using oil palm fiber reinforced thermoplastic composites. Polymers, 14 (11). art. no. 2140. pp. 1-15. ISSN 2073-4360

Mohammed Aldhufairi and Muda, Mohd Khairul Hafiz and Mustapha, Faizal and Ahmad, Kamarul Arifin and Yidris, Noorfaizal (2022) Design of wind nozzle for nozzle augmented wind turbine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 95 (1). 36 - 43. ISSN 2289 - 7879

Mad Ali, Mohd Fahmi and Mohd Ariffin, Mohd Khairol Anuar and Delgoshaei, Aidin and Mustapha, Faizal and Supeni, Eris Elianddy (2022) A comprehensive 3-phase framework for determining the customer’s product usage in a food supply chain. Mathematics, 11 (5). art. no. 1085. pp. 1-20. ISSN 2227-7390

Alotaibi, Alowaid and Muda, Mohd Khairul Hafiz and Mustapha, Faizal and Abdul Halin, Izhal and Yidris, Noorfaizal (2022) Perpetual motion wind turbine generator for novelty energy harvesting system; conceptual design approach. Journal of advanced research in fluid mechanics and thermal sciences, 94 (2). pp. 166-173. ISSN 2289-7879

Alajmi, Shaea and Abdul Halin, Izhal and Mustapha, Faizal and Supeni, Eris Elianddy and Ibrahim, Irwan (2022) Simulation of low voltage dc-dc booster circuit with improved switch for amplification of biophotovoltaic cell output voltage. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2). 124 - 134. ISSN 2289-7879

Othman, Nurul Husna and Mustapha, Mazli and Sallih, Nabihah and Ahmad, Azlan and Mustapha, Faizal and Che Ismail, Mokhtar (2022) The effect of residual solvent in carbon−based filler reinforced polymer coating on the curing properties, mechanical and corrosive behaviour. Materials, 15 (10). art. no. 3445. pp. 1-15. ISSN 1996-1944

Shinde, Avinash and Siva, I. and Munde, Yashwant and Sankar, I. and Sultan, Mohamed Thariq Hameed and Mustapha, Faizal and Shahar, Farah Syazwani and Najeeb, Muhammad Imran (2022) The impacts of graphene dosage on the friction and wear performance of a graphene-reinforced silicone rubber nano composite. Journal of Materials Research and Technology, 21. pp. 1570-1580. ISSN 2238-7854; ESSN: 2214-0697

Aladwani, Habeeb A. H. R. and Ariffin, Mohd Khairol Anuar and Mustapha, Faizal (2022) A supervised machine-learning method for optimizing the automatic transmission system of wind turbines. Engineering Solid Mechanics, 10 (1). 35 - 56. ISSN 2291-8744; ESSN: 2291-8752

Shinde, Avinash and Siva, I. and Munde, Yashwant and Deore, Vishal and Hameed Sultan, Mohamed Thariq and Md Shah, Ain Umaira and Mustapha, Faizal (2021) Testing of silicon rubber/montmorillonite nanocomposite for mechanical and tribological performance. Nanomaterials, 11 (11). art. no. 3050. pp. 1-15. ISSN 2079-4991

Basri, Ernnie Illyani and Hameed Sultan, Mohamed Thariq and Basri, Adi Azriff and Mustapha, Faizal (2021) Consideration of lamination structural analysis in a multi-layered composite and failure analysis on wing design application. Materials, 14 (13). art. no. 3705. pp. 1-10. ISSN 1996-1944

Anwar, Murniwati and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Abdul Halin, Izhal and Abdullah, Mohd Na'im and Hassim, Mohamad Iswady and Mustapha, Mazli (2021) Damage identification on impact and lightning damage of flax composite laminates (Linum usitatissimum) using long-pulse thermography of a low-resolution infrared camera. Frontiers in Materials, 8. pp. 1-16. ISSN 2296-8016

Mad Ali, Mohd Fahmi and Mohd Ariffin, Mohd Khairol Anuar and Mustapha, Faizal and Supeni, Eris Elianddy (2021) An unsupervised machine learning-based framework for transferring local factories into supply chain networks. Mathematics, 9 (23). art. no. 3114. pp. 1-31. ISSN 2227-7390

Mohd Basri, Mohd Salahuddin and Mustapha, Faizal and Mazlan, Norkhairunnisa and Ishak, Mohd Ridzwan (2020) Optimization of adhesion strength and microstructure properties by using response surface methodology in enhancing the rice husk ash-based geopolymer composite coating. Polymers, 12 (11). art. no. 2709. pp. 1-15. ISSN 2073-4360

Al-Ajmi, Mohammad and Muda, Mohd Khairul Hafiz and Abdul Halin, Izhal and Mustapha, Faizal and Mohd Ariffin, Mohd Khairol Anuar (2020) Design of true hybrid solar wind turbine for smaller hybrid renewable energy power plants. Journal of Engineering and Technological Sciences, 52 (6). 881 - 890. ISSN 2337-5779

Mujahid, Yasir and Sallih, Nabihah and Mustapha, Mazli and Abdullah, Mohamad Zaki and Mustapha, Faizal (2020) Effects of processing parameters for vacuum-bagging-only method on shape conformation of laminated composites. Processes, 8 (9). pp. 1-16. ISSN 2227-9717

Mohd Basri, Mohd Salahuddin and Mazlan, Norkhairunnisa and Mustapha, Faizal and Ishak, Mohamad Ridzwan and Saprudin, Abby Ashraff (2020) Factorial design approach to investigate the significance of factors on the fire resistant, compression and adhesion properties of geopolymer binder. Journal of Mechanical Engineering and Sciences, 14 (3). 7191 - 7204. ISSN 2289-4659; ESSN: 2231-8380

Nayak, Suhas Yeshwant and Satish, Shenoy B. and Sultan, Mohamed Thariq Hameed and Kini, Chandrakant R. and Shenoy, K. Rajath and Samant, Rashmi and Sarvade, Praneeth P. and Basri, Adi Azriff and Mustapha, Faizal (2020) Influence of fabric orientation and compression factor on the mechanical properties of 3D E-glass reinforced epoxy composites. Journal of Materials Research and Technology, 9 (4). 8517 - 8527. ISSN 2238-7854

Mohd Basri, Mohd Salahuddin and Mustapha, Faizal and Mazlan, Norkhairunnisa and Ishak, Mohamad Ridzwan (2020) Optimization of rice husk ash-based geopolymers coating composite for enhancement in flexural properties and microstructure using response surface methodology. Coatings, 10 (2). art. no. 165. pp. 1-19. ISSN 2079-6412

Muhammed, Musa and Mustapha, Mazli and Ginta, Turnad Lenggo and Ali, Abdullah Musa and Mustapha, Faizal and Hampo, Chima Cyril (2020) Statistical review of microstructure-property correlation of stainless steel: implication for pre- and post-weld treatment. Processes, 8 (7). art. no. 811. pp. 1-32. ISSN 2227-9717

Basri, Ernnie Illyani and Hameed Sultan, Mohamed Thariq and Mustapha, Faizal and Basri, Adi Azriff and Ahmad, Kamarul Arifin (2019) Unmanned Aerial Vehicle (UAV) structural and manufacturing of conventional and humpback Tubercles Leading Edge (TLE) in aeronautical applications. International Journal of Recent Technology and Engineering, 8 (1 spec. 5). pp. 479-496. ISSN 2277-3878

Mustapha, Faizal and Mohammed, Mohammed Idris and Sulaeman, Erwin (2019) Adopting dynamic transient response analysis for sensors positioning to monitor cable stayed bridge. International Journal of Recent Technology and Engineering, 7 (6S). pp. 54-60. ISSN 2277-3878

Basri, Ernnie Illyani and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Basri, Adi Azriff and Abas, Mohd Firdaus and Abdul Majid, Mohd Shukry and Ahmad, Kamarul Arifin (2019) Conceptual design and simulation validation based finite element optimisation for tubercle leading edge composite wing of an unmanned aerial vehicle. Journal of Materials Research and Technology-JMR&T, 8 (5). pp. 4374-4386. ISSN 2238-7854

Sauli, Shazmira Azwa and Ishak, Mohamad Ridzwan and Mustapha, Faizal and Yidris, Noorfaizal and Hamat, Sanusi (2019) Hybridization of TRIZ and CAD-analysis at the conceptual design stage. International Journal of Computer Integrated Manufacturing, 32 (9). art. no. https://www.tandfonline.com/doi/abs/10.1080/0951192X.2019.1644536?journalCode=tcim20. pp. 890-899. ISSN 0951-192X; ESSN: 1362-3052

Basri, Ernnie Illyani and Hameed Sultan, Mohamed Thariq and Mustapha, Faizal and Basri, Adi Azriff and Abas, Mohd Firdaus and Abdul Majid, Mohd Shukry and Mandeep, Jit Singh and Ahmad, Kamarul Arifin (2019) Performance analysis of composite ply orientation in aeronautical application of unmanned aerial vehicle (UAV) NACA4415 wing. Journal of Materials Research and Technology, 8 (5). pp. 3822-3834. ISSN 2238-7854

Basri, Ernnie Illyani and Basri, Adi Azriff and Abas, Mohd. Firdaus and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Ahmad, Kamarul Arifin (2019) UAV NACA4415 wing structural performance analysis subjected to external aerodynamic load using Schrenk’s approximation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (2). pp. 178-190. ISSN 2289-7879

Wahid, Zaliha and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Mustapha, Faizal and Ismail, Mohd Idris Shah (2019) A study on properties of polymer-based additive manufacturing. Jurnal Kejuruteraan, 31 (1). pp. 93-98. ISSN 0128-0198; ESSN: 2289-7526

Abdullah, Mohd Na’im and Muda, Mohd Khairul Hafiz and Mustapha, Faizal and Mohd Alim, Mohd Shamsul Azmi and Ismail, Mohd Halim Shah (2019) The surface hardness of mild steel and plywood coated with different blending ratio of rice husk ash-based geopolymer. International Journal of Recent Technology and Engineering, 8 (3). pp. 1849-1853. ISSN 2277-3878

Azpen, Qasim Mhalhal and Baharudin, B. T. Hang Tuah and Sulaiman, Shamsuddin and Mustapha, Faizal (2018) Effect of process parameters on the surface roughness of aluminum alloy AA 6061-T6 sheets in frictional stir incremental forming. Advances in Production Engineering & Management, 13 (4). 405 - 416. ISSN 1854-6250; ESSN: 1855-6531

Ariffin, Ahmad Hamdan and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq (2018) The macro-fibre composite–bonded effect analysis on the micro-energy harvester performance and structural health–monitoring system of woven kenaf turbine blade for vertical axis wind turbine application. Advances in Mechanical Engineering, 10 (9). pp. 1-10. ISSN 1687-8132

Abdulshaheed, Ali Mohammed Ali and Mustapha, Faizal and Mohd Ariffin, Mohd Khairol Anuar (2018) Pipe material effect on water network leak detection using a pressure residual vector method. Journal of Water Resources Planning and Management, 144 (4). pp. 1-15. ISSN 0733-9496; ESSN: 1943-5452

Mat Daud, Siti Zubaidah and Mustapha, Faizal and Adzis, Zuraimy (2018) Lightning strike evaluation on composite and biocomposite verticalaxis wind turbine blade using structural health monitoring approach. Journal of Intelligent Material Systems and Structures, 29 (17). 3455 - 3465. ISSN 1045-389X, ESSN: 1530-8138

Azpen, Qasim Mhalhal and Baharudin, B. T. Hang Tuah and Sulaiman, Shamsuddin and Mustapha, Faizal (2018) Reinforcement and hot workability of aluminium alloy 7075 particulate composites: a review. Journal of Engineering Science and Technology, 13 (4). pp. 1034-1057. ISSN 1823-4690

Ariffin, Ahmad Hamdan and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq (2018) The macro-fibre composite-bonded effect analysis on the micro-energy harvester performance and structural health-monitoring system of woven kenaf turbine blade for vertical axis wind turbine application. Advances in Mechanical Engineering, 10 (9). pp. 1-10. ISSN 1687-8140; ESSN: 1687-8140

Gooda Sahib, Muhammad Isfaaq and Leong, Shii Jang and Chia, Chen Ciang and Mustapha, Faizal (2017) Detection of fastener loosening in simple lap joint based on ultrasonic wavefield imaging. In: AEROS Conference 2017, 12 Dec. 2017, Shangri-La Hotel, Putrajaya, Malaysia. (pp. 1-7).

Yaakob, Mohd Saffuan and Zainal Abidin, Nur Amirah and Abdullah, Mohd Na'im and Muda, Mohd Khairul Hafiz and Mustapha, Faizal (2017) Drop-weight impact test on laminated composite plate of flax (Linum usitatissimum) using rice husk ash from paddy (Oryza sativa) as a natural binder. Pertanika Journal of Science & Technology, 25 (1). pp. 317-326. ISSN 0128-7680; ESSN: 2231-8526

Baharudin, B. T. Hang Tuah and Azpen, Qasim Mhalhal and Sulaiman, Shamsuddin and Mustapha, Faizal (2017) Experimental investigation of forming forces in frictional stir incremental forming of aluminum alloy AA6061-T6. Metals, 7 (11). art. no. 484. pp. 1-15. ISSN 2075-4701

Mustapha, Faizal (2017) Innovation in smart materials and structural health monitoring for composite applications. Materials Research Forum LLC, United States. ISBN 9781945291289; EISBN: 9781945291296

Asr, Mahdi Torabi and Masoumi, M. M. and Mustapha, Faizal (2017) Modal behaviour of vertical axis wind turbine comprising prestressed rotor blades: a finite element analysis. Pertanika Journal of Science & Technology, 25 (3). pp. 977-982. ISSN 0128-7680; ESSN: 2231-8526

Shirazi, A. H. S. and Muda, M. K. H. and Thirumurthy, M. J. and Mustapha, Faizal (2017) Wireless structural health monitoring (SHM) system for damage detection using ultrasonic guided waveform response. Pertanika Journal of Science & Technology, 25 (1). pp. 283-292. ISSN 0128-7680; ESSN: 2231-8526

Asr, Mahdi Torabi and Nezhad, Erfan Zal and Mustapha, Faizal and Wiriadidjaja, Surjatin (2016) Study on start-up characteristics of H-Darrieus vertical axis wind turbines comprising NACA 4-digit series blade airfoils. Energy, 112. pp. 528-537. ISSN 0360-5442; ESSN: 1873-6785

Toozandehjani, Meysam and Mustapha, Faizal and Ariffin, Mohd Khairol Anuar and Zahari, Nur Ismarrubie and Matori, Khamirul Amin and Ostovan, Farhad and Fadaeifard, Firouz (2016) Effect of artificial aging on the microstructure and mechanical properties of aluminum alloy AA6061-T6. Metal Science and Heat Treatment, 58 (5-6). pp. 283-286. ISSN 0026-0673; ESSN: 1573-8973

Mohd Basri, Mohd Salahuddin and Mazlan, Norkhairunnisa and Mustapha, Faizal and Ishak, Mohamad Ridzwan (2016) Correlation between compressive strength and fire resistant performance of rice husk ash-based geopolymer binder for panel applications. In: Engineering Technology International Conference 2016 (ETIC 2016), 5-6 Aug. 2016, Ho Chi Minh City, Vietnam. (pp. 1-9).

Asr, Mahdi Torabi and Osloob, Reza and Mustapha, Faizal (2016) Double - stage H-Darrieus wind turbine - rotor aerodynamics. Applied Mechanics and Materials, 829. pp. 21-26. ISSN 1660-9336; ESSN: 1662-7482

Mohd Basri, Mohd Salahuddin and Mustapha, Faizal and Mazlan, Norkhairunnisa and Ishak, Mohamad Ridzwan (2016) Fire retardant performance of rice husk ash-based geopolymer coated mild steel - a factorial design and microstructure analysis. Materials Science Forum, 841. pp. 48-54. ISSN 0255-5476; ESSN: 1662-9752

Chia, Chen Ciang and Gan, Chia Sheng and Mustapha, Faizal (2016) Local wavefield velocity imaging for damage evaluation. In: 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE), 17-22 July 2016, Atlanta, Georgia, USA. (pp. 1-7).

Mohammad, Rosdi and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Mustapha, Faizal and Aoyama, Hideki (2016) Optimization of tool geometry design: the effects on surface roughness. In: International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016), 28-30 Aug. 2016, Kuala Lumpur, Malaysia. (pp. 129-130).

Al-Adnani, Nisreen N. Ali and Mustapha, Faizal and Salit, Mohd Sapuan and Muhammad Rashid, Raizal Saifulnaz (2016) Structural health monitoring and damage identification for composite panels using smart sensor. Journal of Intelligent Material Systems and Structures, 27 (17). pp. 2313-2323. ISSN 1045-389X; ESSN: 1530-8138

Hazmin, Mohd Haniff and Mustapha, Faizal and Mohd Ariffin, Mohd Khairol Anuar and Abdul Halin, Izhal (2016) Waterwheel fin design and its efficiency for a diversion-based hydropower system in Malaysian rivers. In: 13th Universiti Malaysia Terengganu International Annual Symposium on Sustainability Science and Management (UMTAS 2016), 13-15 Dec. 2016, Primula Beach Hotel, Kuala Terengganu. (pp. 342-348).

Mohd Basri, Mohd Salahuddin and Mazlan, Norkhairunnisa and Mustapha, Faizal (2015) A review on thermophysical evaluation of alkali-activated geopolymers. Ceramics International, 41 (3 pt.B). pp. 4273-4281. ISSN 0272-8842; ESSN: 1873-3956

Ali, Nisreen N. and Mustapha, Faizal and Salit, Mohd Sapuan and Muhammad Rashid, Raizal Saifulnaz (2015) An approach and experimental technique for damage detection of composite panels using PZT sensor. International Journal of Civil and Structural Engineering Research, 3 (1). pp. 29-38. ISSN 2348-7607

Khajeh, Amin and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Banhegyi, Gyorgy and Karacsony, Zsuzsanna and Baranyai, Viktor (2015) The effect of thermo-oxidative aging on the durability of glass fiber-reinforced epoxy. Advances in Materials Science and Engineering, 2015. art. no. 372354. pp. 1-13. ISSN 1687-8434; ESSN: 1687-8442

Abang Abdul Majid, Dayang Laila and Che Saffry, Zetty Azleen and Abdullah, Ermira Junita and Mustapha, Faizal and Mohamed Haidzir, Noor Hazira (2014) Operational modal testing of cantilevered composite plate in subsonic flow. Journal of Vibroengineering, 16 (7). pp. 3523-3533. ISSN 1392-8716

Hamdan, Ahmad and Mustapha, Faizal and Ahmad, Kamarul Arifin and Mohd Rafie, Azmin Shakrine (2014) A review on the micro energy harvester in Structural Health Monitoring (SHM) of biocomposite material for Vertical Axis Wind Turbine (VAWT) system: a Malaysia perspective. Renewable and Sustainable Energy Reviews, 35. pp. 23-30. ISSN 1364-0321; ESSN: 1879-0690

Safri, Syafiqah Nur Azrie and Hameed Sultan, Mohamed Thariq and Razali, Noorshazlin and Basri, Shahnor and Yidris, Noorfaizal and Mustapha, Faizal (2014) The effect of layers and bullet type on impact properties of Glass Fibre Reinforced Polymer (GFRP) using a Single Stage Gas Gun (SSGG). Applied Mechanics and Materials, 564. pp. 428-433. ISSN 1660-9336; ESSN: 1662-7482

Wiriadidjaja, Surjatin and Mohd Rafie, Azmin Shakrine and Mustapha, Faizal and Hasim, Fadilah and Khan, Tabrej and Djojodihardjo, Harijono (2014) Basic geometries of the new closed circuit wind tunnel of the Universiti Putra Malaysia (UPM). Applied Mechanics and Materials, 629. pp. 376-381. ISSN 1660-9336; ESSN: 1662-7482

Md. Yusof, Nidzamuddin and Karjanto, Jufrizal and Mustapha, Faizal and Zakaria, Muhammad Zulfattah and Tan, Chee Fai and Mohamad Taha, Mastura and Ismail, Nurhidayah and Mohd Zini, Nurul Hilwa (2014) Case study of the effectiveness of passive grease trap for management on domestic kitchen waste water. In: International Conference on Mathematics, Engineering and Industrial Applications 2014 (ICoMEIA 2014), 28-30 May 2014, Penang, Malaysia. (pp. 1-5).

Mohd Aris, Khairul Dahri and Mustapha, Faizal and Salit, Mohd Sapuan and Abang Abdul Majid, Dayang Laila (2014) Condition Structural Index using Principal Component Analysis for undamaged, damage and repair conditions of carbon fiber-reinforced plastic laminate. Journal of Intelligent Material Systems and Structures, 25 (5). pp. 575-584. ISSN 1045-389X; ESSN: 1530-8138

Lim, Keng Teek and Zahari, Rizal and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq (2014) Experimental assessment of collapse behavior and energy absorption of composite and hybrid composite square tube subjected to oblique loads. The International Journal of Engineering and Science, 3 (3). pp. 13-29. ISSN 2319–1805; ESSN: 2319–1813

Muda, Mohd Khairul Hafiz and Mustapha, Faizal and Mohd Aris, Khairul Dahri and Hameed Sultan, Mohamed Thariq (2014) Fabrication technique for bio-composite patch repair on laminated structures of CFRP plate. Applied Mechanics and Materials, 564. pp. 366-371. ISSN 1660-9336; ESSN: 1662-7482

Razali, Noorshazlin and Hameed Sultan, Mohamed Thariq and Safri, Syafiqah Nur Azrie and Basri, Shahnor and Yidris, Noorfaizal and Mustapha, Faizal (2014) High velocity impact test on glass fibre reinforced polymer (GFRP) using a single stage gas gun (SSGG) - an experimental based approach. Applied Mechanics and Materials, 564. pp. 376-381. ISSN 1660-9336; ESSN: 1662-7482

Hameed Sultan, Mohamed Thariq and Basri, Shah Nor and Mohd Rafie, Azmin Shakrine and Yidris, Noorfaizal and Mustapha, Faizal and Zahari, Rizal and Mohd Ajir, Mohd Ramly (2014) Impact damage analysis for glass reinforced epoxy laminated plates using single stage gas gun. Applied Mechanics and Materials, 564. pp. 382-387. ISSN 1660-9336; ESSN: 1662-7482

Razali, N. and Hameed Sultan, Mohamed Thariq and Mustapha, Faizal and Yidris, Noorfaizal and Ishak, Mohamad Ridzwan (2014) Impact damage on composite structures – a review. The International Journal of Engineering and Science, 3 (7). pp. 8-20. ISSN 2319-1805; ESSN: 2319-1813

Safri, Syafiqah Nur Azrie and Hameed Sultan, Mohamed Thariq and Yidris, Noorfaizal and Mustapha, Faizal (2014) Low velocity and high velocity impact test on composite materials - a review. The International Journal of Engineering and Science, 3 (9). pp. 50-60. ISSN 2319–1805; ESSN: 2319–1813

Jamaludin, Siti Nur Sakinah and Basri, Shahnor and Ahmad Hussain, and Al-Othmany, Dheya Shujaa and Mustapha, Faizal and Muhammad Nuruzzaman, Dewan (2014) Three-dimensional finite element modeling of thermomechanical problems in functionally graded hydroxyapatite/titanium plate. Mathematical Problems in Engineering, 2014. art. no. 371462. pp. 1-20. ISSN 1024-123X; ESSN: 1563-5147

Hamdan, Ahmad and Mustapha, Faizal and Ahmad, Kamarul Arifin and Mohd Rafie, Azmin Shakrine and Hameed Sultan, Mohamed Thariq and Ishak, Mohamad Ridzwan (2014) A review on the self energize structural health monitoring (SHM) in vertical axis wind turbine (VAWT) system. Applied Mechanics and Materials, 564. pp. 157-163. ISSN 1660-9336; ESSN: 1662-7482

Hameed Sultan, Mohamed Thariq and Mohd Rafie, Azmin Shakrine and Yidris, Noorfaizal and Mustapha, Faizal and Zahari, Rizal (2013) Damage classification in CFRP laminates using the NDT/E approach. NDT Spectra (7). pp. 217-224. ISSN 2231-9891

Mustapha, Mazli and Othman, E. Abu and Norsal, K. and Mustapha, Faizal and Mamat, Othman and Ramesh, Singh (2013) Carbothermal nitridation process of mechanically milled silica sand using Taguchi's method. Ceramics International, 39 (6). pp. 6119-6130. ISSN 0272-8842; ESSN: 1873-3956

Jassim, Zuhir Ali and Ali, Nisreen N. and Mustapha, Faizal and Abdul Jalil, Nawal Aswan (2013) A review on the vibration analysis for a damage occurrence of a cantilever beam. Engineering Failure Analysis, 31. pp. 442-461. ISSN 1350-6307; ESSN: 1873-1961

Jamaludin, Siti Nur Sakinah and Mustapha, Faizal and Nuruzzaman, Dewan Muhammad and Basri, Shah Nor (2013) A review on the fabrication techniques of functionally graded ceramic-metallic materials in advanced composites. Scientific Research and Essays, 8 (21). art. no. 7960EB927795. pp. 828-840. ISSN 1992-2248

Djojodihardjo, Harijono and Abdul Hamid, Mohd Faisal and Jaafar, Abdul Aziz and Basri, Shahnor and Romli, Fairuz Izzudin and Mustapha, Faizal and Mohd Rafie, Azmin Shakrine and Abang Abdul Majid, Dayang Laila (2013) Computational study on the aerodynamic performance of wind turbine airfoil fitted with Coandă jet. Journal of Renewable Energy, 2013. art. no. 839319. pp. 1-17. ISSN 2314-4386; ESSN: 2314-4394

Sichani, Mohammadmehdi Shahzamanian and Sahari, Barkawi and Bayat, Mehdi and Mustapha, Faizal and Zahari, Nur Ismarrubie (2013) Elastic contact analysis of functionally graded brake disks subjected to thermal and mechanical loads. International Journal for Computational Methods in Engineering Science and Mechanics, 14 (1). pp. 10-23. ISSN 1550-2287; ESSN: 1550-2295

Che Saffry, Zetty Azleen and Abdul Majid, Dayang Laila Abang and Romli, Fairuz Izzudin and Mustapha, Faizal and Abdullah, Ermira Junita (2013) Identification of modal properties of composite thin plate using OMA in wind tunnel environment. Applied Mechanics and Materials, 446-447. pp. 606-610. ISSN 1660-9336; ESSN: 1662-7482

Faizal Mustapha (2012) Method and apparatus for processing and filtering wastewater for removing solid waste and FOG (fats, oils and grease) from the wastewater. PI2012700892.

Djojodihardjo, Harijono and Jamali, Hamed and Shokrani, Alireza and Mustapha, Faizal and Zahari, Rizal and Wiriadidjaja, Surjatin (2012) Computational simulation for static and dynamic load of rectangular plate in elastic region for analysis of impact resilient structure. In: AEROTECH-IV 2012-Recent Advances in Aerospace Technology, 21-22 Nov. 2012, Kuala Lumpur, Malaysia. (pp. 150-157).

Zahari, Rizal and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Mohd Rafie, Azmin Shakrine and Hameed Sultan, Mohamed Thariq (2012) Geometric non-linear analysis of composite laminated plates using higher order finite strip element. Applied Mechanics and Materials, 225. pp. 165-171. ISSN 1660-9336; ESSN: 1662-7482

Hameed Sultan, Mohamed Thariq and Basri, Shahnor and Mohd Rafie, Azmin Shakrine and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Mohd Ajir, Mohd Ramly (2012) High velocity impact damage analysis for glass epoxy - laminated plates. Advanced Materials Research, 399-401. pp. 2318-2328. ISSN 1022-6680; ESSN: 1662-8985

Mohd Aris, Khairul Dahri and Mustapha, Faizal and Salit, Mohd Sapuan and Abang Abdul Majid, Dayang Laila (2012) A condition structural index (CSI) using principal component analysis (PCA) for normal, damage and repair conditions of CFRP laminate. In: International Conference on Advances in Structural Health Management and Composite Structures (ASHMCS 2012), 29-31 Aug. 2012, Jeonju, South Korea. (pp. 1-5).

Noroziroshan, Alireza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Mustapha, Faizal (2012) A hybrid GA-SA algorithm for multi-objective sequencing problem in high-product mix shop-floor. Applied Mechanics and Materials, 110-116. pp. 3964-3971. ISSN 1660-9336; ESSN: 1662-7482

Mustapha, Faizal and Ng, Wei Sim and Shahrjerdi, Ali (2011) Finite element analysis (FEA) modeling on adhesive joint for composite fuselage model. International Journal of Physical Sciences, 6 (22). pp. 5153-5165. ISSN 1992-1950

Abu Talib, Abd. Rahim and Abbud, Luay Hashem and Ali, Aidy and Mustapha, Faizal (2011) Mechanical properties of interlaminer Kevlar29 and Al2O3 powder/epoxy composite plates using an analytical approach. Scientific Research and Essays, 6 (21). art. no. 5B9B4FA38698. pp. 4455-4463. ISSN 1992-2248

Shahrjerdi, Reza and Mohd Ariffin, Mohd Khairol Anuar and Mustapha, Faizal and Ismail, Napsiah and Esmaeili, Maryam (2011) An integrated inventory models under cooperative and non-cooperative seller-buyer and vendor supply chain. African Journal of Business Management, 5 (20). pp. 8361-8367. ISSN 1993-8233

Alsultaney, Hazem K. and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Ali, Aidy and Mustapha, Faizal (2011) An experimental validation and optimisation tool path strategy for thin walled structure. Pertanika Journal of Science & Technology, 19 (2). pp. 365-371. ISSN 0128-7680; ESSN: 2231-8526

Shahrjerdi, Ali and Mustapha, Faizal and Bayat, Mehdi and Salit, Mohd Sapuan and Abang Abdul Majid, Dayang Laila (2011) Fabrication of functionally graded Hydroxyapatite-Titanium by applying optimal sintering procedure and powder metallurgy. International Journal of Physical Sciences, 6 (9). pp. 2258-2267. ISSN 1992-1950

Noroziroshan, Alireza and Mohd Ariffin, Mohd Khairol Anuar and Ismail, Napsiah and Mustapha, Faizal (2011) An optimization technique using hybrid GA-SA algorithm for multi-objective scheduling problem. Scientific Research and Essays, 6 (8). art. no. 587417120543. pp. 1720-1731. ISSN 1992-2248

Jahan, Ali and Mustapha, Faizal and Ismail, Mohd Yusuf and Salit, Mohd Sapuan and Bahraminasab, Marjan (2011) A comprehensive VIKOR method for material selection. Materials and Design, 32 (3). pp. 1215-1221. ISSN 0261-3069

Varatharajoo, Renuganth and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Zahari, Rizal and Kahle, Ralph (2011) Critical speeds for carbon/epoxy composite rotors in spacecraft energy storage applications. Key Engineering Materials, 471-472. pp. 37-42. ISSN 1013-9826; ESSN: 1662-9795

Mohamad, Nurhaniza and Mohd Ariffin, Mohd Khairol Anuar and Ali, Aidy and Mustapha, Faizal (2011) Deflection analysis of the thin-web workpiece structure using similarity concept. Advanced Materials Research, 337. pp. 479-488. ISSN 1022-6680; ESSN: 1662-8985

Shahrjerdi, Ali and Mustapha, Faizal and Bayat, Mehdi and Abang Abdul Majid, Dayang Laila (2011) Free vibration analysis of solar functionally graded plates with temperature-dependent material properties using second order shear deformation theory. Journal of Mechanical Science and Technology, 25 (9). pp. 2195-2209. ISSN 1738-494X; ESSN: 1976-3824

Shahrjerdi, Ali and Mustapha, Faizal and Bayat, Mehdi and Salit, Mohd Sapuan and Zahari, Rizal and M. M., Shahzamanian (2011) Natural frequency of F.G. rectangular plate by shear deformation theory. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012008. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Shahrjerdi, Ali and Mustapha, Faizal and Salit, Mohd Sapuan and Bayat, Mehdi and Abang Abdul Majid, Dayang Laila and Zahari, Rizal (2011) Optimal sintering procedure to fabrication of functionally graded Hydroxyapatite-Titanium. Key Engineering Materials, 471-472. pp. 140-144. ISSN 1013-9826; ESSN: 1662-9795

Ng, Wei Sim and Mustapha, Faizal and Varatharajoo, Renuganth and Zahari, Rizal and Abang Abdul Majid, Dayang Laila (2011) Parametric study on cohesive element for composite fuselage model. Key Engineering Materials, 471-472. pp. 1085-1090. ISSN 1013-9826; ESSN: 1662-9795

Haris, Mohd Yusoff and Abang Abdul Majid, Dayang Laila and Zainudin, Edi Syams and Mustapha, Faizal and Zahari, Rizal and Halim, Zahurin (2011) Preliminary review of biocomposites materials for aircraft radome application. Key Engineering Materials, 471-472. pp. 563-567. ISSN 1013-9826; ESSN: 1662-9795

Shahrjerdi, Ali and Mustapha, Faizal (2011) Second order shear deformation theory (SSDT) for free vibration analysis on a functionally graded quadrangle plate. In: Recent Advances in Vibrations Analysis. InTech, Rijeka, Croatia, pp. 59-78. ISBN 9789533076966

Zahari, Rizal and Abang Abdul Majid, Dayang Laila and Mustapha, Faizal and Varatharajoo, Renuganth and A. Rasid, Zainudin and Ayob, Amran (2011) Thermal buckling and post-buckling improvements of laminated composite plates using finite element method. Key Engineering Materials, 471-47 (5). pp. 536-541. ISSN 1013-9826

Shahrjerdi, Ali and Mustapha, Faizal and Salit, Mohd Sapuan and Bayat, Mehdi and Abang Abdul Majid, Dayang Laila and Zahari, Rizal (2011) Thermal free vibration analysis of temperature-dependent functionally graded plates using second order shear deformation. Key Engineering Materials, 471-472. pp. 133-139. ISSN 1013-9826; ESSN: 1662-9795

Affandi, Nuraishah Bazilah and Mohd. Rafie, Azmin Shakrine and Basri, Shahnor and Romli, Fairuz Izzudin and Abang Abdul Majid, Dayang Laila and Mustapha, Faizal (2011) A preliminary study on translational kinetic energy absorption using coconut-fiber (Coir) sheets as a potential impact-worthy constituent in advanced aerospace material. Key Engineering Materials, 471-472. pp. 1028-1033. ISSN 1013-9826; ESSN: 1662-9795

Mohd Aris, Khairul Dahri and Mustapha, Faizal and Salit, Mohd Sapuan and Abang Abdul Majid, Dayang Laila (2011) A structural health monitoring of a pitch catch active sensing of PZT sensor on normal, damage and repair aircraft spoiler. Key Engineering Materials, 471-472. pp. 1124-1129. ISSN 1013-9826; ESSN: 1662-9795

M. M., Shahzamanian and Sahari, Barkawi and Bayat, Mehdi and Zahari, Nur Ismarrubie and Mustapha, Faizal (2010) Transient and thermal contact analysis for the elastic behavior of functionally graded brake disks due to mechanical and thermal loads. Materials and Design, 31 (10). pp. 4655-4665. ISSN 0264-1275

Mustapha, Faizal and Mustapha, Mazli and Noorsal, Kartini and Mamat, Othman and Hussain, Patthi and Ahmad, Faiz and Muhamad, Norhamidi and Mohamed Haris, Sallehuddin (2010) Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process. Journal of Materials Processing Technology, 210 (12). pp. 1598-1612. ISSN 0924-0136; ESSN: 1873-4774

Sichani, Mohammadmehdi Shahzamanian and Sahari, Barkawi and Bayat, Mehdi and Mustapha, Faizal and Zahari, Nur Ismarrubie (2010) Finite element analysis of thermoelastic contact problem in functionally graded axisymmetric brake disks. Composite Structures, 92 (7). pp. 1591-1602. ISSN 0263-8223; ESSN: 1879-1085

Jahan, Ali and Ismail, Md. Yusof and Salit, Mohd Sapuan and Mustapha, Faizal (2010) Material screening and choosing methods – A review. Materials and Design, 31 (2). pp. 696-705. ISSN 0264-1275; ESSN: 1873-4197

Yidris, Noorfaizal and Zahari, Rizal and Abang Abdul Majid, Dayang Laila and Mustapha, Faizal and Hameed Sultan, Mohamed Thariq and Mohd Rafie, Azmin Shakrine (2010) Crush simulation of woven c-glass/epoxy unmanned ariel vehicle fuselage section. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 260-267. ISSN 1823-0334

Mustapha, Faizal and Ismail, Napsiah and Salit, Mohd Sapuan and Noh, Z. and Samsuri, Abd Wahid (2010) Development of a prototype knowledge based system for troubleshooting of aircraft engine and parts- A case study of Cessna Caravan. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 36-42. ISSN 1823-0334

Mohamad, Nurhaniza and Mohd Atan, Kamel Ariffin and Ali, Aidy and Mustapha, Faizal and Abdul Wahab, Noraini (2010) Finite element analysis of composites materials for aerospace applications. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Shahrjerdi, Ali and Bayat, Mehdi and Mustapha, Faizal and Salit, Mohd Sapuan and Zahari, Rizal (2010) Free vibration analysis of functionally graded quadrangle plates using second order shear deformation theory. Australian Journal of Basic and Applied Sciences, 4 (5). pp. 893-905. ISSN 1991-8178

Jahan, Ali and Ismail, Md. Yusof and Mustapha, Faizal and Salit, Mohd Sapuan (2010) Material selection based on ordinal data. Materials & Design, 31 (7). pp. 3180-3187. ISSN 0261-3069

Taher, Siavash T. and Oshkour, Azim Ataollahi and Zahari, Rizal and Mustapha, Faizal and Basri, Shahnor (2010) On the Crush Behavior of an Ultra Light Multi-Cell Foam-Filled Composite Structure under Axial Compression. Journal of Reinforced Plastics and Composites, 29 (3). ISSN 0731-6844

Shahrjerdi, Ali and Bayat, Mehdi and Mustapha, Faizal and Salit, Mohd Sapuan and Zahari, Rizal (2010) Stress analysis a functionally graded quadrangle plate using second order shear deformation theory. International Review of Mechanical Engineering, 4 (1). pp. 92-105. ISSN 1970-8734

Esfahani, Reza Moghadam and Farshidianfar, Anooshiravan and Shahrjerdi, A. and Mustapha, Faizal (2009) Longitudinal vibrations analysis of vehicular clutch. Australian Journal of Basic and Applied Sciences, 3 (4). pp. 3633-3641. ISSN 1991-8178

Taher, Siavash T. and Zahari, Rizal and Ataollahi, Simin and Mustapha, Faizal and Basri, Shahnor (2009) A double-cell foam-filled composite block for efficient energy absorption under axial compression. Composite Structures, 89 (3). pp. 399-407. ISSN 0263-8223

Golestaneh, Amirreza Fahim and Ali, Aidy and Wong, Shaw Voon and Mustapha, Faizal and Mohammadi, Mehdi Zadeh (2009) Computational investigation of crack behavior in friction stir welding. Simulation, 85 (1). pp. 45-59. ISSN 0037-5497; ESSN: 1741-3133

Alsultaney, Hazem K. and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Ali, Aidy and Mustapha, Faizal (2009) Develpoment of combinatorial optimisation for cutting tool path strategy. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 579-587).

Mohamad, Nurhaniza and Mohd Ariffin, Mohd Khairol Anuar and Ali, Aidy and Mustapha, Faizal and Abdul Wahab, Noraini (2009) Finite element analysis of composite materials for aerospace applications. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 172-182).

Basri, Shahnor and Fakir, Md. Moslemuddin and Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Jaafar, Abdul Aziz (2009) Heat distribution in rectangular fins using efficient finite element and differential quadrature methods. Engineering, 1 (3). pp. 151-160. ISSN 1947-3931; ESSN: 1947-394X

Zahari, Rizal and Azmee, Abdul Hannan and Mustapha, Faizal and Salit, Mohd Sapuan and Varatharajoo, Renuganth and Shakrine, Azmine (2008) Prediction of progressive failure in woven glass/epoxy composite laminated panels. Jurnal Mekanikal, 25. pp. 80-91. ISSN 2289-3866; ESSN: 2289-3873

Chetwynd, Daley and Mustapha, Faizal and Worden, Keith and Rongong, Jem A. and Pierce, Stephen Gareth and Dulieu-Barton, Janice M. (2008) Damage localisation in a stiffened composite panel. Strain, 44 (4). pp. 298-307. ISSN 0039-2103

Golestaneh, Amirreza Fahim and Ali, Aidy and Wong, Shaw Voon and Mustapha, Faizal and Mohammadi, Mehdi Zadeh (2008) Simulation of fatigue crack growth in friction stir welded joints in 2024-T351 al alloy. Suranaree Journal of Science and Technology, 15 (4). pp. 271-285. ISSN 0858-849X

Mustapha, Faizal and Salit, Mohd Sapuan and Ismail, Napsiah and Mokhtar, Ahmad Samsuri (2004) A computer-based intelligent system for fault diagnosis of an aircraft engine. Engineering Computations, 21 (1). pp. 78-90. ISSN 0264-4401

Salit, Mohd Sapuan and Devanesan Jacob, M. Suresh and Mustapha, Faizal and Ismail, Napsiah (2002) A prototype knowledge-based system for material selection of ceramic matrix composites of automotive engine components. Materials and Design, 23 (8). pp. 701-708. ISSN 0264-1275

Mustapha, Faizal and Abang Abdul Majid, Dayang Laila and Ng, Kooi Huat Novitect; a novelty detection soft-computing algorithm for Structural Health Monitoring (SHM) system. In: International Conference on Advances Science and Contemporary Engineering 2012 (ICASCE 2012), 21-26 Oct. 2012, Jakarta, Indonesia. (pp. 494-504).