Items where Author is "Hairuddin, Abdul Aziz"

Liu, Yunyun and As’arry, Azizan and Hassan, Mohd Khair and Hairuddin, Abdul Aziz and Mohamad, Hesham (2024) Review of the grey wolf optimization algorithm: variants and applications. Neural Computing and Applications, 36 (6). pp. 2713-2735. ISSN 0941-0643; ESSN: 1433-3058

Lai, Lai Win and Abdul Aziz, Faieza and Hairuddin, Abdul Aziz and Abdullah, Lili Nurliyana and Hwa, Jen Yap and Saito, Hideo and Seyajah, Norhisham (2022) Effectiveness on training method using virtual reality and augmented reality applications in automobile engine assembly. ASEAN Engineering Journal, 12 (1). 01-May. ISSN 2586–9159

Ikhtiar, Usman and Hairuddin, Abdul Aziz and Asarry, Azizan and Md Rezali, Khairil Anas and Muhammad Ali, Hafiz (2022) Numerical investigation of lamella heat exchanger for engine intake charge air cooling utilizing refrigerant as coolant medium. Alexandria Engineering Journal, 65. pp. 661-673. ISSN 1110-0168

Ahmed, Hesham and As’arry, Azizan and Hairuddin, Abdul Aziz and Hassan, Mohd Khair and Liu, Yunyun and Onwudinjo, Erasmus Cufe Ujunwa (2022) Online DE optimization for Fuzzy-PID controller of semi-active suspension system featuring MR damper. IEEE Access, 10. 129125 - 129138. ISSN 2169-3536

Samsudin, Salmi and Abdul Aziz, Nuraini and Hairuddin, Abdul Aziz and Masuri, Siti Ujila (2021) Developing sub-bituminous coal sintering ratio for predicting coal ash slagging factors. International Journal of Technology, 12 (4). 791 - 501. ISSN 2086-9614

Rabby, Md Insiat Islam and Masuri, Siti Ujila and Samsul Kamal, Ahmad Syakir Fariz and Leman, Zulkiflle and Hairuddin, Abdul Aziz and Abdul Aziz, Nuraini (2021) Flow characteristics of disk bypass Pipeline Inspection Gauge (PIG) in natural gas pipelines using computational fluid dynamics. CFD Letters, 13 (4). pp. 11-37. ISSN 2180-1363

Samsudin, Salmi and Abdul Aziz, Nuraini and Hairuddin, Abdul Aziz and Masuri, Siti Ujila (2021) A study on bituminous coal base acid ratio to the slagging factor at large scale boiler. International Journal of Heat and Technology, 39 (3). 833 - 840. ISSN 0392-8764

Abdul Rani, Nadia and Abdul Aziz, Faieza and Hairuddin, Abdul Aziz and Ahmad, Siti Azfanizam and Hemdi, Abdul Rahman (2020) Augmented reality: capabilities and challenges in machining industry aligned with industry 4.0. Advances in Materials and Processing Technologies. pp. 1-9. ISSN 2374-068X; ESSN: 2374-0698

Abdulhamed, Ali Jaber and Rasheed, Maithem Hussein and Kadhim Kareem, Hanaa and Adam, Nor Mariah and Ab-Kadir, Mohd. Zainal A. and Hairuddin, Abdul Aziz (2020) Design and performance testing of a parabolic trough collector including deformation test of the receiver tube. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 67 (2). 47 - 65. ISSN 2289-7879

M., Norhafana and M. M., Noor and F. Y., Hagos and Hairuddin, Abdul Aziz (2020) Diesel and various blending nanoparticles based diesel, fuel properties study. IOP Conference Series: Materials Science and Engineering, 788. art. no. 012061. pp. 1-9. ISSN 1757-8981; ESSN: 1757-899X

Abdulhamed, Ali Jaber and Adam, Nor Mariah and Ab. Kadir, Mohd. Zainal Abidin and Hairuddin, Abdul Aziz (2020) Flow and thermal mechanisms in receiver tube of parabolic trough collectors with rings axially connected together and radially connected to the inner tube surface. Journal of Engineering and Applied Sciences, 15 (3). 762 - 772. ISSN 1816-949X; ESSN: 1818-7803

Win, Lai Lai and Abdul Aziz, Faieza and Hairuddin, Abdul Aziz and Abdullah, Lili Nurliyana and Yap, Hwa Jen and Saito, Hideo and Seyajah, Norhisham (2020) Immersive virtual reality application development using high tech computer vive and high-end laptop. Nanoscience and Nanotechnology Letters, 12 (5). pp. 628-632. ISSN 1941-4900; ESSN: 1941-4919

Masuri, Siti Ujila and Hairuddin, Abdul Aziz and Muhssen, Hassan Sadah and Sahari, Barkawi (2019) Computational fluid dynamics investigation of air-gas pre mixing controller mixer designed for CNG-diesel dual-fuel engines. CFD Letters, 11 (6). pp. 47-62. ISSN 2180-1363

Mossa, Muntasser Abdulabbas and Hairuddin, Abdul Aziz and Abdul Aziz, Nuraini and Jamal, Zulkiple and Muhamad Tobib, Hasyuzariza (2019) Effects of hot exhaust gas recirculation (EGR) on the emission and performance of a single-cylinder diesel engine. International Journal of Automotive and Mechanical Engineering, 16 (2). pp. 6660-6674. ISSN 2229-8649; ESSN: 2180-1606

Eid Thafnan Alajmi, Amer Eid Salem and Adam, Nor Mariah and Hairuddin, Abdul Aziz and Abdullah, Luqman Chuah (2019) Fuel atomization in gas turbines: a review of novel technology. International Journal of Energy Research, 43 (8). pp. 3166-3181. ISSN 0363-907X

Mohamamad Sharif, Pshtiwan and Hairuddin, Abdul Aziz and As'arry, Azizan and Md Rezali, Khairil Anas and Mat Noor, Muhamad and Mohamed, Norhafana and Mossa, Muntasser Abdulabbas and Shareef, Sharaf (2019) International regulation of vehicle emissions control rules and its influence on academic engine development experimental study and vehicle manufacturing. IOP Conference Series: Materials Science and Engineering, 469. art. no. 012070. pp. 1-14. ISSN 1757-8981; ESSN: 1757-899X

Mohamamad Sharif, Pshtiwan and Hairuddin, Abdul Aziz and As’arry, Azizan and Md Rezali, Khairil Anas and Mat Noor, Muhamad and Mohamed, Norhafana and Shareef, S. M. (2019) Nano gas bubbles dissolve in gasoline fuel and its influence on engine combustion performance. IOP Conference Series: Materials Science and Engineering, 469. art. no. 012062. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Hairuddin, Abdul Aziz and M. Tobib, Hasyuzariza and Zulkifli, Fariza and M. Noor, Muhamad (2019) The performance of a single-cylinder diesel engine fuelled with egusi based biodiesel. IOP Conference Series: Materials Science and Engineering, 469 (1). pp. 1-10. ISSN 1757-8981; ESSN: 1757-899X

M. Tobib, Hasyuzariza and Rostam, Hamzah and Mossa, Muntasser A. A. and Hairuddin, Abdul Aziz and Mat Noor, Muhamad (2019) The performance of an HCCI-DI engine fuelled with palm oil-based biodiesel. IOP Conference Series: Materials Science and Engineering, 469. pp. 1-9. ISSN 1757-8981; ESSN: 1757-899X

Hairuddin, Abdul Aziz and Mat Noor, Muhamad and Pshtiwan, M. Sharif and Mohamed, Norhafana and Hagos, F. Y. and Kadirgama, Kumaran and Ramasamy, D. and Rahman, M. M. and Alenezi, R. and Hoang, A. T. (2019) A review of the performance and emissions of nano additives in diesel fueled compression ignition-engines. IOP Conference Series: Materials Science and Engineering, 469 (1). art. no. 012035. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Aljaberi, Hassan A. and Hairuddin, Abdul Aziz and Abdul Aziz, Nuraini (2018) Effect of fuel injection strategies on performance and emissions in HCCI engines: a review. International Review of Mechanical Engineering, 12 (4). 341 - 353. ISSN 1970-8734

M. Aboghrara, Alsanossi and Alghoul, Mohammad and Baharudin, B. T. HangTuah and Elbreki, Abdelnaser and A. Ammar, Alhadi and Sopian, Kamaruzzaman and Hairuddin, Abdul Aziz (2018) Parametric study on the thermal performance and optimal design elements of solar air heater enhanced with jet impingement on a corrugated absorber plate. International Journal of Photoenergy, 2. pp. 1-21. ISSN 1110-662X; ESSN: 1687-529X

Alajmi, Fnyees S. M. D. A. and Hairuddin, Abdul Aziz and Adam, Nor Mariah and Abdullah, Luqman Chuah (2018) Recent trends in biodiesel production from commonly used animal fats. International Journal of Energy Research, 42 (3). 885 - 902. ISSN 0363-907X; ESSN: 1099-114X

JaberAbdulhamed, Ali and Adam, Nor Mariah and Ab Kadir, Mohd Zainal Abidin and Hairuddin, Abdul Aziz (2018) Review of solar parabolic-trough collector geometrical and thermal analyses, performance, and applications. Renewable and Sustainable Energy Reviews, 91. 822 - 831. ISSN 1364-0321; ESSN: 1879-0690

Hairuddin, Abdul Aziz and Yusaf, Talal and Wandel, Andrew P. (2016) Single-zone zero-dimensional model study for diesel-fuelled homogeneous charge compression ignition (HCCI) engines using Cantera. International Journal of Automotive and Mechanical Engineering, 13 (2). pp. 3309-3328. ISSN 2229-8649; ESSN: 2180-1606

Abduhamed, A. J. and Adam, Nor Mariah and Hairuddin, Abdul Aziz and Kareem, H. K. (2016) Design and fabrication of a heat exchanger for portable solar water distiller system. International Food Research Journal, 23 (suppl.). S15-S22. ISSN 1985-4668; ESSN: 2231-7546

Hairuddin, Abdul Aziz and Wandel, Andrew P. and Yusaf, Talal (2014) An introduction to a homogeneous charge compression ignition engine. Journal of Mechanical Engineering and Sciences, 7. pp. 1042-1052. ISSN 2289-4659; ESSN: 2231-8380

Hairuddin, Abdul Aziz and Yusaf, Talal and Wandel, Andrew P. (2014) A review of hydrogen and natural gas addition in diesel HCCI engines. Renewable and Sustainable Energy Reviews, 32. pp. 739-761. ISSN 1364-0321; ESSN: 1879-0690

Hairuddin, Abdul Aziz and Shafanejad, Mohammed Amin (2018) Improvement of engine performance of a single-cylinder compression ignition engine using 3D-printed helical thread intake manifold. In: 5th Mechanical Engineering Research Day (MERD'18), 3 May 2018, Kampus Teknologi UTeM, Melaka. (pp. 40-41).

Hairuddin, Abdul Aziz and Wandel, Andrew P. and Yusaf, Talal (2013) A homogeneous charge compression ignition engine: an introduction. In: 3rd Malaysian Postgraduate Conference (MPC2013), 4-5 July 2013, Education Malaysia Australia (EMA), Sydney, New South Wales, Australia. (pp. 37-47).