Items where Author is "As'arry, Azizan"

Liu, Yunyun and Nurshahiera, Aina and As'arry, Azizan and Abas, Hesham Ahmed Abdul Mutleba and Hairuddin, Abdul Aziz and Hassan, Mohd Khair (2024) Active force control for semi-active suspension with magnetorheological damper. Journal of Advanced Research in Applied Mechanics, 122 (1). pp. 156-162. ISSN 2289-7895

Mohd Radzman, Mohamad Aizat and Ismail, Mohd Idris Shah and Mohd Ariffin, Mohd Khairol Anuar and Tang, Sai Hong and As'arry, Azizan (2023) Multi-objective optimization in surface transformation hardening of S50C carbon steel by single-mode fiber laser. Jurnal Tribologi, 39. pp. 106-116. ISSN 2289-7232

Seham Ismail, Alhatem Satta and As'arry, Azizan and Sapuan, Salit Mohd and Tarique, Jamal (2023) Improvement of plastic manufacturing processes by six sigma and dmaic methods. Applied Science and Engineering Progress, 16 (spec.3). art. no. 6838. pp. 1-12. ISSN 2672-9156; ESSN: 2673-0421

Hadi Irazman, Hani Nasuha and Saad, Mohd Sazli and Baharudin, Mohamad Ezral and Zakaria, Mohd Zakimi and Nor, Azuwir Mohd and As'arry, Azizan (2023) Optimizing surface roughness of PLA printed parts using Particle Swarm Optimization (PSO). International Journal of Engineering Trends and Technology, 71 (9). 92 - 103. ISSN 2349-0918; ESSN: 2231-5381

Jaafar, Che Nor Aiza and As'arry, Azizan and Ismail, Rezawati and Zainol, Ismail and T-Dele-Afolabi, Temitope (2021) Factors affecting the quality of technical processes training. International Journal of Manufacturing Economics and Management, 1 (1). 59 - 64. ISSN 2784-1278

Syed Abdullah, Syed Ahmad Saufi and Mohamed Yusoff, Mohd Zuhri and Mohammad Reza, Lalegani Dezaki and Salit, Mohd Sapuan and R. A., Ilyas and As'arry, Azizan and Mohd Ariffin, Mohd Khairol Anuar and M., Bodaghi (2021) Compression behaviour of bio-inspired honeycomb reinforced starfish shape structures using 3D printing technology. Polymers, 13 (24). pp. 1-17. ISSN 2073-4360

Adam, Nor Mariah and Attia, Osam Hassan and Al-Sulttani, Ali Omran Muhsin and Mahmood, Hussein Adel and As'arry, Azizan and Md Rezali, Khairil Anas (2020) Numerical analysis for solar panel subjected to an external force to overcome adhesive force in desert areas. Journal of CFD Letters, 12 (9). 60 - 75. ISSN 2180-1363

Alrifaey, Moath and Hong, Tang Sai and As'arry, Azizan and Supeni, Eris Elianddy and Ang, Chun Kit (2020) Optimization and selection of maintenance policies in an electrical gas turbine generator based on the hybrid reliability-centered maintenance (RCM) model. Processes, 8 (6). pp. 1-25. ISSN 2227-9717

Abdul Mutalib, Mohd Zurrayen and Ismail, Mohd Idris Shah and As'arry, Azizan and Abdul Jalil, Nawal Aswan (2020) Multi-objective optimization in friction drilling of AISI1045 steel using grey relational analysis. International Journal of Modern Manufacturing Technologies, 12 (1). 75 - 81. ISSN 2067–3604

Shehan, Muna Khalil and Sahari, Barkawi and Abdul Jalil, Nawal Aswan and Tang, Sai Hong and As'arry, Azizan (2020) Dynamic analysis of an optimal active suspension system us-ing global search optimization. International Journal of Engineering and Technology Innovation, 7 (3 spec. 17). 43 - 46. ISSN 2223-5329; ESSN: 2226-809X

Ghazali, Anith Khairunnisa and Hassan, Mohd Khair and Mohd Radzi, Mohd Amran and As'arry, Azizan (2020) Electric vehicle with sliding mode control super-twisting control strategy. Journal of Physics: Conference Series, 1432. pp. 1-6. ISSN 1742-6588; ESSN: 1742-6596

Abdul Mutalib, Mohd Zurrayen and Ismail, Mohd Idris Shah and As'arry, Azizan and Abdul Jalil, Nawal Aswan (2020) Evaluation of tool wear and machining performance by analyzing vibration signal in friction drilling. Jurnal Tribologi, 24. 100 - 109. ISSN 2289-7232

Chilabi, Haider Jaafar and Salleh, Hanim and Supeni, Eris Elianddy and As'arry, Azizan and Md Rezali, Khairil Anas and Atrah, Ahmed B. (2020) Harvesting energy from planetary gear using piezoelectric material. Energies, 13 (1). art. no. 223. pp. 1-25. ISSN 1996-1073

Ghazali, Anith Khairunnisa and Hassan, Mohd Khair and Mohd Radzi, Mohd Amran and As'arry, Azizan (2020) Integrated braking force distribution for electric vehicle regenerative braking system. Pertanika Journal of Science and Technology, 28 (spec. 2). pp. 173-182. ISSN 0128-7680; ESSN: 2231-8526

Ghazali, Anith Khairunnisa and Hassan, Mohd Khair and Mohd Radzi, Mohd Amran and As'arry, Azizan (2020) Sliding mode control optimization method using fuzzy-gain scheduling for regenerative braking system. Journal of Advanced Research in Dynamical and Control Systems, 12 (4 spec.). 1504 - 1509. ISSN 1943-023X

Alsayed, Abdallah S. Z. and Raja Ahmad, Raja Mohd Kamil and Harun @ Ramli, Hafiz Rashidi and As'arry, Azizan (2020) An automated data acquisition system for pinch grip assessment based on Fugl Meyer protocol: a feasibility study. Applied Sciences, 10 (10). art. no. 3436. pp. 1-18. ISSN 2076-3417

Attia, Osam Hassan and Adam, Nor Mariah and As'arry, Azizan and Md Rezali, Khairil Anas (2019) Removal of dust from the solar panel surface using mechanical vibrator. Journal of Physics: Conference Series, 1262. pp. 1-8. ISSN 1742-6588; ESSN: 1742-6596

Mohd Najib, Mohamad Aznan and Mohamed Ariff, Azmah Hanim and Mohd Tahir, Suraya and As'arry, Azizan and Mazlan, Norkhairunnisa (2019) Microstructural, physical and mechanical analysis of RHA pore modified porous alumina with aluminum as reinforcement. ASEAN Engineering Journal, 9 (1). pp. 29-43. ISSN 2586-9159

Tuan Abdul Rahman, Tuan Ahmad Zahidi and As'arry, Azizan and Abdul Jalil, Nawal Aswan and Raja Ahmad, Raja Mohd Kamil (2019) Dynamic modelling of a flexible beam structure using feedforward neural networks for active vibration control. International Journal of Automotive and Mechanical Engineering, 16 (1). pp. 6263-6280. ISSN 2229-8649; ESSN: 2180-1606

Alsayed, Abdallah and Raja Ahmad, Raja Mohd Kamil and Ramli, Hafiz Rashidi and As'arry, Azizan (2019) Design and calibration of pinch force measurement using strain gauge for post-stroke patients. International Journal of Integrated Engineering, 11 (4). pp. 40-50. ISSN 2229-838X; ESSN: 2600-7916

Attia, Osam Hassan and Adam, Nor Mariah and As'arry, Azizan and Md Rezali, Khairil Anas and Hanoon, Ammar Nasiri (2019) Development of a prediction model for output power reduction of PV solar panels based on environmental parameters using particle swarm optimization technique. Journal of Engineering and Applied Sciences, 14 (5). pp. 1518-1531. ISSN 1816-949X

Alrifaey, Moath and Tang, Sai Hong and Supeni, Eris Elianddy and As'arry, Azizan and Ang, Chun Kit (2019) Identification and prioritization of risk factors in an electrical generator based on the hybrid FMEA framework. Energies, 12 (4). art. no. 649. pp. 1-22. ISSN 1996-1073

Mohamamad Sharif, Pshtiwan and Hairuddin, Abdul Aziz and As'arry, Azizan and Md Rezali, Khairil Anas and Mat Noor, Muhamad and Mohamed, Norhafana and Mossa, Muntasser Abdulabbas and Shareef, Sharaf (2019) International regulation of vehicle emissions control rules and its influence on academic engine development experimental study and vehicle manufacturing. IOP Conference Series: Materials Science and Engineering, 469. art. no. 012070. pp. 1-14. ISSN 1757-8981; ESSN: 1757-899X

Ismail, Nazarul Abidin and Ismail, Mohd Idris Shah and Mohd Radzman, Mohamad Aizat and Mohd Ariffin, Mohd Khairol Anuar and As'arry, Azizan (2019) Parametric optimization of robot-based single point incremental forming using Taguchi method. International Journal of Integrated Engineering, 11 (1). pp. 217-224. ISSN 2229-838X; ESSN: 2600-7916

S. A., Alamin Gabasa and Md Razali, Khairil Anas and As'arry, Azizan and Abdul Jalil, Nawal Aswan (2019) Vibration transmitted to the hand by backpack blowers. International Journal of Automotive and Mechanical Engineering, 16 (2). pp. 6697-6705. ISSN 2229-8649; ESSN: 2180-1606

Ismail, Mohd Idris Shah and Abdul Jalil, Nawal Aswan and As'arry, Azizan and Abdul Mutalib, Mohd Zurrayen (2018) Characterization of tool wear in friction drilling. Jurnal Tribologi, 17. 93 - 103.

Samin, Razali and Hao, N. C. and As'arry, Azizan and Md Rezali, Khairil Anas and Nuawi, Mohd Zaki (2018) Effect of disc brake squeal with respect to thickness variation: Experimental Modal Analysis. Journal of Mechanical Engineering, 6 (1 spec.). 33 - 44. ISSN 1823- 5514; ESSN: 2550-164X

Mohamad Aznan, M. N. and Mohamed Ariff, Azmah Hanim and Mohd Tahir, Suraya and Mazlan, Norkhairunnisa and As'arry, Azizan (2017) Properties of alumina with RHA-reinforced aluminum composite using different sintering profile. Journal of the Australian Ceramic Society, 53 (1). 187 - 191. ISSN 2510-1560; ESSN: 2510-1579

Tuan Abdul Rahman, Tuan Ahmad Zahidi and As'arry, Azizan and Abdul Jalil, Nawal Aswan (2017) Active vibration control of a flexible beam structure using chaotic fractal search algorithm. Procedia Engineering, 170. pp. 299-306. ISSN 1877-7058

Shehan, Muna Khalil and Sahari, Barkawi and Abdul Jalil, Nawal Aswan and Tang, Sai Hong and As'arry, Azizan (2017) System optimization algorithm for 3DOF quarter car active suspension. International Journal of Vehicle Structures and Systems, 9 (3). pp. 172-176. ISSN 0975-3060; ESSN: 0975-3540

As'arry, Azizan and Rezali, Khairil Anas Md and Jalil, Nawal Aswan Abdul and Samin, Razali and Zulkefli, Zamir Aimaduddin and Zain, Mohd Zarhamdy Md. (2017) Tremor suppression for 4-DOFs biodynamic hand model using genetic algorithm. International Journal of Advanced Mechatronic Systems, 7 (3). 151 - 157. ISSN 1756-8412; ESSN: 1756-8420

Abdulwahab, Abdullah Mohamed and Adam, Nor Mariah and As'arry, Azizan (2016) Experimental works on the influence of Malaysian kitchen temperature on the energy consumption of domestic refrigerator. International Journal of Applied Engineering Research, 11 (19). pp. 10027-10038. ISSN 0973-4562; ESSN: 1087-1090

Md Rezali, Khairil Anas and As'arry, Azizan and Zulkefli, Zamir Aimaduddin and Samin, Razali and Abdul Jalil, Nawal Aswan (2016) Predicting the transmissibility of a glove material to the palm using a simple lumped parameter model of the hand and the glove. Jurnal Teknologi , 78 (6-10). pp. 17-22. ISSN 0127-9696; ESSN: 2180-3722

Rahman, Tuan A. Z. and Md Rezali, Khairil Anas and As'arry, Azizan (2023) CSGO: a game-inspired metaheuristic algorithm for global optimization. In: 2023 International Conference on Circuit Power and Computing Technologies (ICCPCT), 10-11 Aug. 2023, Kallam, Kerala State, India. (pp. 766-771).

Ma, Haohao and Wu, Xuping and As'arry, Azizan and Han, Weiliang and Mu, Tong and Feng, Yanwei (2023) Domestic garbage target detection based on improved YOLOv5 algorithm. In: 13th IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE2023), 20-21 May 2023, Penang, Malaysia. (pp. 238-243).

Seperamaniam, Thandayuthapani and Abdul Jalil, Nawal Aswan and Zulkefli, Zamir Aimaduddin and As'arry, Azizan (2018) Hydrostatic bearing circular recess damping characteristic effectiveness on rotor vibration. In: Asia International Conference on Tribology 2018 (ASIATRIB 2018), 17-20 Sept. 2018, Kuching, Sarawak, Malaysia. (pp. 71-72).

Tuan Abdul Rahman, Tuan Ahmad Zahidi and As'arry, Azizan and Abdul Jalil, Nawal Aswan and Raja Ahmad, Raja Mohd Kamil (2018) Training feedforward neural networks for fault diagnosis of ball bearing. In: 5th Mechanical Engineering Research Day (MERD'18), 3 May 2018, Kampus Teknologi UTeM, Melaka. (pp. 290-292).

Tuan Abdul Rahman, Tuan Ahmad Zahidi and As'arry, Azizan and Abdul Jalil, Nawal Aswan and Raja Ahmad, Raja Mohd Kamil (2017) Chaotic fractal search algorithm for global optimization with application to control design. In: 2017 IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE 2017), 24-25 Apr. 2017, Langkawi, Kedah. (pp. 111-116).

Tuan Abdul Rahman, Tuan Ahmad Zahidi and Abdul Jalil, Nawal Aswan and As'arry, Azizan and Raja Ahmad, Raja Mohd Kamil (2017) Performance evaluation of chaos-enhanced stochastic fractal search algorithm using constrained engineering design problems. In: 5th International Symposium on Applied Engineering and Sciences (SAES2017), 14-15 Nov. 2017, Universiti Putra Malaysia. (p. 30).

As'arry, Azizan and Naseer, Fahad Mohammad and Tuan Abdul Rahman, Tuan Ahmad Zahidi and Md Rezali, Khairil Anas and Md. Zain, Mohd Zarhamdy (2017) Semi-active suspension control for formula SAE car using magneto-rheological fluid. In: 2017 IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE 2017), 24-25 Apr. 2017, Langkawi, Kedah. (pp. 97-101).

As'arry, Azizan and Jamaluddin, Hafiz and Tuan Abdul Rahman, Tuan Ahmad Zahidi and Md Rezali, Khairil Anas and Md. Zain, Mohd Zarhamdy (2016) Suppression of Parkinson's hand-like tremor using fuzzy-PID controller. In: 2016 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), 22 Oct. 2016, Faculty of Electrical Engineering, Universiti Teknologi Mara, Shah Alam. .

Mohd Najib, Mohamad Aznan and Mohamed Ariff, Azmah Hanim and Mohd Tahir, Suraya and As'arry, Azizan (2015) Rice husk ash reinforcement in alumina : a review on mechanical and microstructural properties. In: INTROP Research Colloquim 2015, 1-2 Dec. 2015, RHR Hotel, Uniten, Putrajaya. .