Items where Author is "Ali, Aidy"

Mohd Salleh, Salwani and Ali, Aidy and Sahari, Barkawi and Abdul Aziz, Nuraini (2016) Effect of automotive side member materials on the head injury criteria (HIC) and chest severity index (CSI) of adult passenger. International Journal of Engineering and Technologies, 7. pp. 47-59. ISSN 2297-623X

Mat Jusoh, Suriani and Ali, Aidy and Abdan, Khalina and Salit, Mohd Sapuan and Haftirman (2016) Fatigue life estimation of kenaf reinforced composite materials by non-destructive techniques. Universal Journal of Materials Science, 4 (4). pp. 88-96. ISSN 2331-6691; ESSN: 2331-6705

Ibraheem, Sameer Adnan and Sreenivasan, Subramania Sarma and Abdan, Khalina and A. Sulaiman, Shamsuddin and Ali, Aidy and Abang Abdul Majid, Dayang Laila (2016) The effects of combined chemical treatments on the mechanical properties of three grades of sisal. BioResources, 11 (4). pp. 8968-8980. ISSN 1930-2126

Mohd Salleh, Salwani and Sahari, Barkawi and Ali, Aidy and Abdul Aziz, Nuraini (2015) Assessment of head injury criteria and chest severity index for frontal impact. Journal of Mechanical Engineering and Sciences, 8. pp. 1376-1382. ISSN 2289-4659; ESSN: 2231-8380

Mohd Salleh, Salwani and Sahari, Barkawi and Ali, Aidy and Abdul Aziz, Nuraini (2014) The effect of automotive side member filling on car frontal impact performance. Journal of Mechanical Engineering and Sciences, 6. pp. 873-880. ISSN 2289-4659; ESSN: 2231-8380

Mohammad, Khairul Azhar and Salit, Mohd Sapuan and Zainudin, Edi Syams and Zahari, Nur Ismarubie and Ali, Aidy (2014) Fatigue life prediction of austenitic Type 316L stainless steel using ABAQUS. Advanced Materials Research, 911. pp. 459-462. ISSN 1022-6680; ESSN: 1662-8985

Mat Jusoh, Suriani and Ali, Aidy and Salit, Mohd Sapuan and Abdan, Khalina (2013) Aspect of fatigue analysis of composite materials: a review. Pertanika Journal of Science & Technology, 21 (1). pp. 1-14. ISSN 0128-7680; ESSN: 2231-8526

Mohamad, Khairul Azhar and Zainudin, Edi Syams and Salit, Mohd Sapuan and Zahari, Nur Ismarrubie and Ali, Aidy (2013) Fatigue life for type 316L stainless steel under cyclic loading. Advanced Materials Research, 701. pp. 77-81. ISSN 1022-6680; ESSN: 1662-8985

Ng, Sok Choo and Ismail, Napsiah and Ali, Aidy and Sahari, Barkawi and Mohd Yusof, Juraina (2013) Ultrasonic NDE for internal defect detection in multi-layered composite materials by multi-resolution signal decomposition. Journal of Applied Sciences, 13 (1). pp. 87-94. ISSN 1812-5654

Mat Jusoh, Suriani and Ali, Aidy and Abdan, Khalina and Salit, Mohd Sapuan and Abdullah, Shahrir and Haftirman, (2012) Detection of defects in natural composite materials using a thermal imaging technique. Materials Testing, 54 (5). pp. 340-346. ISSN 0025-5300

Jalaluddin, Mai Nursherida and Abdul Aziz, Nuraini and Sahari, Barkawi and Ali, Aidy and Abdul Aziz, Faieza and Tuan Ismail, Tuan Hafandi and Azizi, Azim and Mohd Salleh, Salwani and M. S., Nabilah and S. S., Aini and M., Shahril and M. H., Norhidayah (2012) Determination of leg injury criteria subjected to frontal impacts. Applied Mechanics and Materials, 165. pp. 265-269. ISSN 1660-9336; ESSN: 1662-7482

Salit, Mohd Sapuan and Ali, Aidy and Makinejad, Majid Davoodi and Abu Osman, Noor Azuan and Oshkour, Azim Ataollahi and Wan Abas, Wan Abu Bakar (2012) Development process of new bumper beam for passenger car: a review. Materials and Design, 40. pp. 304-313. ISSN 0261-3069

Salit, Mohd Sapuan and Ali, Aidy and Ahmad, Desa and Abdan, Khalina and Makinejad, Majid Davoodi and Jonoobi, Mehdi (2012) Effect of polybutylene terephthalate (PBT) on impact property improvement of hybrid kenaf/glass epoxy composite. Materials Letters, 67 (1). pp. 5-7. ISSN 0167-577X

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Ali, Aidy and Ahmad, Desa (2012) Effect of the strengthened ribs in hybrid toughned kenaf/glass epoxy composites bumper beam. Life Science Journal, 9 (1). pp. 210-213. ISSN 1097-8135; ESSN: 2372-613X

Abdullah, Abdul Hakim and Alias, Siti Khadijah and Jenal, Norhisyam and Abdan, Khalina and Ali, Aidy (2012) Fatigue behavior of kenaf fibre reinforced epoxy composites. Engineering Journal, 16 (5). pp. 105-113. ISSN 0125-8281

Abu Talib, Abd. Rahim and Abbud, Luay Hashem and Ali, Aidy and Mustapha, Faizal (2011) Mechanical properties of interlaminer Kevlar29 and Al2O3 powder/epoxy composite plates using an analytical approach. Scientific Research and Essays, 6 (21). art. no. 5B9B4FA38698. pp. 4455-4463. ISSN 1992-2248

Radif, Zainab Shakir and Ali, Aidy and Abdan, Khalina (2011) Development of a green combat armour from rame-Kevlar-polyester composite. Pertanika Journal of Science & Technology, 19 (2). pp. 339-348. ISSN 0128-7680; ESSN: 2231-8526

Alsultaney, Hazem K. and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Ali, Aidy and Mustapha, Faizal (2011) An experimental validation and optimisation tool path strategy for thin walled structure. Pertanika Journal of Science & Technology, 19 (2). pp. 365-371. ISSN 0128-7680; ESSN: 2231-8526

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2011) Modeling of residual stress relaxation of fatigue in 2024-T351 aluminium alloy. International Journal of Fatigue, 33 (2). pp. 279-285. ISSN 0142-1123

Radif, Zainab Shakir and Ali, Aidy (2011) Fracture toughness of kenaf mat reinforced polyester composite. Pertanika Journal of Science & Technology, 19 (1). pp. 177-187. ISSN 0128-7680; ESSN: 2231-8526

Golestaneh, Amirreza Fahim and Ali, Aidy and Bayat, Mehdi (2011) Analytical and numerical investigation of fatigue crack growth in aluminum alloy. Key Engineering Materials, 462-463. pp. 1050-1055. ISSN 1013-9826; ESSN: 1662-9795

Hosseinabadi, Reza Afshar and Ali, Aidy and Sahari, Barkawi and Bayat, Mehdi (2011) Auto adjust masses of automotive structures with desired centre of gravity. Key Engineering Materials, 462-463. pp. 812-816. ISSN 1013-9826; ESSN: 1662-9795

Afshar, Reza and Ali, Aidy and Sahari, Barkawi and Bayat, Mehdi (2011) Axial crush of the tubular structure with various cee-shaped cross-sections. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012039. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi (2011) Characterization of shot peened 2024-T351 aluminum alloy. Key Engineering Materials, 462-463. pp. 912-917. ISSN 1013-9826; ESSN: 1662-9795

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Ahmad, Desa and Ali, Aidy and Abdan, Khalina and Jonoobi, Mehdi (2011) Concept selection of car bumper beam with developed hybrid bio-composite material. Materials & Design, 32 (10). pp. 4857-4865. ISSN 0261-3069

Mohamad, Nurhaniza and Mohd Ariffin, Mohd Khairol Anuar and Ali, Aidy and Mustapha, Faizal (2011) Deflection analysis of the thin-web workpiece structure using similarity concept. Advanced Materials Research, 337. pp. 479-488. ISSN 1022-6680; ESSN: 1662-8985

Ali, Aidy and Radeef, Zainab Shakir and Abdan, Khalina and Salit, Mohd Sapuan (2011) Development of anti-ballistic board from ramie fiber. Polymer-Plastics Technology and Engineering, 50 (6). pp. 622-634. ISSN 0360-2559; ESSN: 1525-6111

Ibraheem, Sameer Adnan and Ali, Aidy and Abdan, Khalina (2011) Development of green insulation boards from kenaf fibres and polyurethane. Polymer-Plastics Technology and Engineering, 50 (6). pp. 613-621. ISSN 0360-2559; ESSN: 1525-6111

Ibraheem, Sameer Adnan and Ali, Aidy and Abdan, Khalina (2011) Development of green insulation boards from kenaf fibres part 1: development and characterization of mechanical properties. Key Engineering Materials, 462-463. pp. 1343-1348. ISSN 1013-9826; ESSN: 1662-9795

Ibraheem, Sameer Adnan and Ali, Aidy and Abdan, Khalina (2011) Development of green insulation boards from kenaf fibres part 2: characterizations of thermal and water absorption. Key Engineering Materials, 462-463. pp. 1331-1336. ISSN 1013-9826; ESSN: 1662-9795

Abdul Samad, Mohd Syazwan and Ali, Aidy and Sidhu, Rajdave Singh (2011) Durability of automotive jounce bumper. Materials and Design, 32 (2). pp. 1001-1005. ISSN 0261-3069

Abdullah, Abdul Hakim and Abdan, Khalina and Ali, Aidy (2011) Effects of fiber volume fraction on unidirectional kenaf/epoxy composites: the transition region. Polymer-Plastics Technology and Engineering, 50 (13). pp. 1362-1366. ISSN 0360-2559; ESSN: 1525-6111

Golestaneh, Amirreza Fahim and Ali, Aidy and Bayat, Mehdi (2011) Experimental and analytical studies of fatigue crack growth in peened after skimmed friction stir welded joint of 2024-T351 Al alloy. Key Engineering Materials, 462-463. pp. 1212-1217. ISSN 1013-9826; ESSN: 1662-9795

Sidhu, Rajdave Singh and Ali, Aidy and Hassan, Mohd Roshdi (2011) Experimental determination of fatigue life of automotive jounce bumper. Key Engineering Materials, 462-463. pp. 634-638. ISSN 1013-9826; ESSN: 1662-9795

Che Lah, Nur Azida and Ali, Aidy (2011) Fatigue strength improvement of MIG-welded joint by shot peening. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012001. pp. 1-6. ISSN 1757-8981; ESSN: 1757-899X

Mohammad, Khairul Azhar and Ali, Aidy and Oshkour, Azim Ataollahi and Sahari, Barkawi and Abdullah, Shahrum (2011) Investigation of creep fatigue crack propagation in aluminium tube. Key Engineering Materials, 462-463. pp. 541-546. ISSN 1013-9826; ESSN: 1662-9795

Abdul Samad, Mohd Syazwan and Ali, Aidy and Mohd Ariffin, Mohd Khairol Anuar (2011) Life prediction of rubber automotive components using finite element method. Key Engineering Materials, 462-463. pp. 535-540. ISSN 1013-9826; ESSN: 1662-9795

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2011) Micro-hardness and residual stress relaxation of 2024 T351 aluminum alloy. Key Engineering Materials, 462-463. pp. 343-348. ISSN 1013-9826; ESSN: 1662-9795

Eslamian, Saeed and Sahari, Barkawi and Ali, Aidy and Mahdi, Elsadig and Hamouda, Abdel Magid Salem (2011) Microscopic study of 5083-H321 aluminium alloy under fretting fatigue condition. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012026. pp. 1-11. ISSN 1757-8981; ESSN: 1757-899X

Maringgal, Bernard and Abdan, Khalina and Ali, Aidy and Janius, Rimfield and Faizal, Muhammad and Kamaruddin, Siti (2011) Optimization of compression moulding temperature for polypropylene materials. Materials Testing, 53 (5). pp. 280-284. ISSN 0025-5300

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi (2011) Prediction of residual stress relaxation of shot peened 2024-T351 aluminum alloy: part 1. Key Engineering Materials, 462-463. pp. 1355-1360. ISSN 1013-9826; ESSN: 1662-9795

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi (2011) Prediction of residual stress relaxation of shot peened 2024-T351 aluminum alloy: part 2. Key Engineering Materials, 462-463. pp. 1349-1354. ISSN 1013-9826; ESSN: 1662-9795

Ali, Aidy and Jaafar, Mohd Saleh and Alwathaf, Ahmed Hasan and Algorafi, Mohammed A. (2011) Stress-strain modelling of reinforced concrete membrane sructures. International Journal of Physical Sciences, 6 (30). art. no. 70A532621254. pp. 6820-6828. ISSN 1992-1950

Oshkour, Azim Ataollahi and Sahari, Barkawi and Ali, Aidy (2011) Variation of stress intensity factor through the thickness of plate. IOP Conference Series: Materials Science and Engineering, 17 (1). art. no. 012004. pp. 1-12. ISSN 1757-8981; ESSN: 1757-899X

Kamarudin, Siti Hasnah and Abdan, Khalina and Ali, Aidy and Sharif, Jamaliah (2011) The effect of EVA on composite that made of PP nanoclay. Key Engineering Materials, 462-463. pp. 925-930. ISSN 1013-9826; ESSN: 1662-9795

Bernard, Martin and Abdan, Khalina and Ali, Aidy and Janius, Rimfield and Faizal, Muhammad and K. S., Hasanah and Sanuddin, Asmawi (2011) The effect of processing parameters on the mechanical properties of kenaf fibre plastic composite. Materials and Design, 32 (2). pp. 1039-1043. ISSN 0264-1275; ESSN: 1873-4197

Dashtizadeh, Zahra and Ali, Aidy and Abdan, Khalina (2011) A review of non-destructive thermography techniques toward structural integrity of bio-composites. Key Engineering Materials, 471-472. pp. 103-108. ISSN 1013-9826; ESSN: 1662-9795

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Ahmad, Desa and Ali, Aidy and Abdan, Khalina and Mehdi, Janoobi (2010) Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam. Materials & Design, 31 (10). pp. 4927-4932. ISSN 0264-1275; ESSN: 1873-4197

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2010) Residual stress relaxation and surface hardness of a 2024-t351 aluminium alloy. Materials Testing, 52 (9). pp. 632-639. ISSN 0025-5300

Chieh, C. W. and Ali, Aidy and Sanuddin, Asmawi and Hosseinabadi, Reza Afshar (2010) Durability simulation of elastomeric materials using finite element method (FEM). Pertanika Journal of Science & Technology, 18 (2). pp. 441-450. ISSN 0128-7680; ESSN: 2231-8526

Ali, Aidy and Hosseini, Maryam and Sahari, Barkawi (2010) A review and comparison on some rubber elasticity models. Journal of Scientific and Industrial Research, 67 (7). pp. 495-500. ISSN 0022-4456; ESSN: 0975-1084

Abu Talib, Abdul Rahim and Ali, Aidy and Badie, Mohamed A. and Che Lah, Nur Azida and Golestaneh, Amirreza Fahim (2010) Developing a hybrid, carbon/glass fiber-reinforced, epoxy composite automotive drive shaft. Materials and Design, 31 (1). pp. 514-521. ISSN 0264-1275

Ali, Aidy and Tun, Chun Yung and Zulkefli, Zamir Aimaduddin and Abd. Aziz, Nuraini and Sahari, Barkawi and Mohammadi, Mehdi Zadeh (2010) Strength investigation of thick welded T-Joint using finite element modelling. Defence Science Journal, 60 (1). pp. 112-118. ISSN 0011-748X; ESSN: 0976-464X

Che Lah, Nur Azida and Ali, Aidy and Ismail, Napsiah and Lim, Poon Chai and Mohamed, Abdul Aziz (2010) The effect of controlled shot peening on fusion welded joints. Materials and Design, 31 (1). pp. 312-324. ISSN 0264-1275

Ali, Aidy and Hosseini, Maryam and Sahari, Barkawi (2010) Continuum damage mechanics modeling for fatigue life of elastomeric materials. International Journal of Structural Integrity, 1 (1). pp. 63-72. ISSN 1757-9864

Abu Talib, Abdul Rahim and Ali, Aidy and Hamdan, Gehad Goudah Soliman Mosleh and Che Lah, Nur Azida and Golestaneh, Amirreza Fahim (2010) Developing a composite based elliptic spring for automotive applications. Materials and Design, 31 (1). pp. 475-484. ISSN 0261-3069

Sidhu, R. S. and Ali, Aidy (2010) Fatigue life of automotive rubber jounce bumper. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Mohamad, Nurhaniza and Mohd Atan, Kamel Ariffin and Ali, Aidy and Mustapha, Faizal and Abdul Wahab, Noraini (2010) Finite element analysis of composites materials for aerospace applications. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Lee, L. S. and Ali, Aidy and Sanuddin, Asmawi and Reza, Afshar (2010) Simulation and Experimental Work on a Thin-Walled Structure Under Crushing. Journal of Failure Analysis and Prevention, 10. pp. 143-151. ISSN 1547-7029

Samad, M. S. A. and Ali, Aidy (2010) Simulation work of fatigue life prediction of rubber automotive components. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Ali, Aidy and Ahmad, Desa and Abdan, Khalina (2010) Thermoplastic impact property improvement in hybrid natural fibre epoxy composite bumper beam. IOP Conference Series: Materials Science and Engineering, 11 (1). ISSN 1757-899X

Ali, Aidy and Sanuddin, Asmawi and Ezzeddin, Saifuliwan (2010) The effect of aging on Arenga pinnata fiber-reinforced epoxy composite. Materials and Design, 31 (7). pp. 3550-3554. ISSN 0261-3069; ESSN: 1873-4197

Ali, Aidy and Fouladi, Mohammad Hosseini and Sahari, Barkawi (2010) A review of constitutive models for rubber-like materials. American Journal of Engineering and Applied Sciences, 3 (1). pp. 232-239. ISSN 1941-7020; ESSN: 1941-7039

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2009) Relaxation of compressive residual stress. Part 1: relaxation of stage I. Journal of Scientific and Industrial Research, 68 (12). pp. 1035-1037. ISSN 0022-4456; ESSN: 0975-1084

Bayat, Mehdi and Sahari, Barkawi and Saleem, Mahdiyya and Ali, Aidy and Wong, Shaw Voon (2009) Bending analysis of a functionally graded rotating disk based on the first order shear deformation theory. Applied Mathematical Modelling, 33 (11). pp. 4215-4230. ISSN 0307-904X; ESSN: 1872-8480

Golestaneh, Amirreza Fahim and Ali, Aidy and Mohammadi, Mehdi Zadeh (2009) Modelling the fatigue crack growth in friction stir welded joint of 2024-T351 Al alloy. Materials and Design, 30 (8). pp. 2928-2937. ISSN 0264-1275; ESSN: 1873-4197

Che Lah, Nur Azida and Ali, Aidy and Ismail, Napsiah (2009) Characterization of fusion welded joint: a review. Pertanika Journal of Science & Technology, 17 (2). pp. 201-210. ISSN 0128-7680; ESSN: 2231-8526

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2009) Modelling of residual stress relaxation : a review. Pertanika Journal of Science & Technology, 17 (2). pp. 325-336. ISSN 0128-7680; ESSN: 2231-8526

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2009) Modelling of residual stress relaxation: a review. Pertanika Journal of Science & Technology, 17 (2). pp. 211-218. ISSN 0128-7680; ESSN: 2231-8526

Golestaneh, Amirreza Fahim and Ali, Aidy (2009) Application of numerical method to investigation of fatigue crack behavior through the friction stir welding. Journal of Failure Analysis and Prevention, 9 (2). pp. 147-158. ISSN 1547-7029; ESSN: 1864-1245

Hosseinabadi, Reza Afshar and Ali, Aidy and Sahari, Barkawi (2009) Auto generation of the center of gravity of tubular structures during crush deformation. International Journal of Computational Methods, 6 (2). pp. 333-348. ISSN 0219-8762; ESSN: 1793-6969

Golestaneh, Amirreza Fahim and Ali, Aidy and Wong, Shaw Voon and Mustapha, Faizal and Mohammadi, Mehdi Zadeh (2009) Computational investigation of crack behavior in friction stir welding. Simulation, 85 (1). pp. 45-59. ISSN 0037-5497; ESSN: 1741-3133

Mat Noor, Muhamad and Kadirgama, Kumaran and Ali, Aidy and Rahman, Md. Mustafizur and Ghazalli, Zakri (2009) Prediction of end-of-life strategies for household equipments using artificial intelligent. American Journal of Applied Sciences, 6 (10). pp. 1838-1844. ISSN 1546-9239; ESSN: 1554-3641

Zaroog, Omar Suliman and Ali, Aidy and Sahari, Barkawi and Zahari, Rizal (2009) Relaxation of residual stress part 2: relaxation of stage 2. American Journal of Engineering and Applied Sciences, 2 (4). pp. 759-763. ISSN 1941-7020; ESSN: 1941-7039

Ali, Aidy and Che Lah, Nur Azida and Chin, Tan Soo (2009) Simulation of crack under compression loads. International Review of Mechanical Engineering, 3 (2). pp. 203-208. ISSN 1970-8734

Ali, Aidy and Salit, Mohd Sapuan and Mike, W. Brown (2009) Studies on 2024-T351 Friction Stir Welding joints. International Journal of Nano System Technology, Electrical Engineering and Electronics Systems , 2 (2). pp. 39-46. ISSN 0974-6447

Bayat, Mehdi and Sahari, Barkawi and Saleem, Muhammad Azhar and Ali, Aidy and Wong, Shaw Voon (2009) Thermoelastic solution of a functionally graded variable thickness rotating disk with bending based on the first-order shear deformation theory. Thin-Walled Structures, 47 (5). pp. 568-582. ISSN 0263-8231

Zadeh, M. and Ali, Aidy and Golestaneh, Amirreza Fahim and Sahari, Barkawi (2009) Three dimensional simulation of fatigue crack growth in friction stir welded joints of 2024-T351 Al alloy. Journal of Scientific and Industrial Research, 68 (9). pp. 775-782. ISSN 0022-4456

Ali, Aidy and Brown, Mike W. and Rodopoulos, Christopher A. (2008) Modelling of crack coalescence in 2024-T351 Al alloy friction stir welded joints. International Journal of Fatigue, 30 (10-11). pp. 2030-2043. ISSN 0142-1123

Tahriri, Farzad and Osman, Mohd Rasid and Ali, Aidy and Mohd Yusuff, Rosnah and Esfandiary, Alireza (2008) AHP approach for supplier evaluation and selection in a steel manufacturing company. Journal of Industrial Engineering and Management, 1 (2). pp. 54-76. ISSN 2013-8423; ESSN: 2013-0953

Ali, Aidy and Zaroog, Omar Suliman (2008) Characterisation and fatigue of friction stir welding. Suranaree Journal of Science and Technology, 15 (2). pp. 95-106. ISSN 0858-849X

Ali, Aidy and Brown, Mike W. and Zaroog, Omar Suliman (2008) Fatigue damage of 2024-T351 aluminium alloy friction stir welding joints. Part 2: fatigue damage. Suranaree Journal of Science and Technology, 15 (4). pp. 261-270. ISSN 0858-849X

Golestaneh, Amirreza Fahim and Ali, Aidy and Wong, Shaw Voon and Mustapha, Faizal and Mohammadi, Mehdi Zadeh (2008) Simulation of fatigue crack growth in friction stir welded joints in 2024-T351 al alloy. Suranaree Journal of Science and Technology, 15 (4). pp. 271-285. ISSN 0858-849X

Ali, Aidy and Salit, Mohd Sapuan and Mohd Ghazi, Tinia Idaty (2008) Wastewater treatment using photochemical oxidation. International Journal of Chemical Science, 6 (3). pp. 1241-1265. ISSN 0972-768X

Tahriri, Farzad and Osman, Mohammad Rasid and Ali, Aidy and Mohd Yusuff, Rosnah (2008) A review of supplier selection methods in manufacturing industries. Suranaree Journal of Science and Technology, 15 (3). pp. 201-208. ISSN 0858-849X

Ali, Aidy and Brown, Mike W. and Rodopoulos, Chris A. and Gardiner, S. (2006) Characterization of 2024-T351 friction stir welding joints. Journal of Failure Analysis and Prevention, 6 (4). pp. 83-96. ISSN 1547-7029

Ali, Aidy and Salit, Mohd Sapuan and Mohd Ghazi, Tinia Idaty (2009) Simulation for engineering undergraduates. Universiti Putra Malaysia Press, Serdang, Selangor. ISBN 9789673440740

Mat Jusoh, Suriani and Ali, Aidy and Salit, Mohd Sapuan and Abdan, Khalina (2011) Non-destructive techniques (NDT) in composite materials. In: Fracture and Strength of Solids VII. Key Engineering Materials, 462-463 . Trans Tech Publications, Switzerland, pp. 918-924. ISBN 0878492100, 9780878492107

Mohd Salleh, Salwani and Sahari, Barkawi and Ali, Aidy and Hassan, Mas Ayu and Daud, Rosdi (2016) Correlations between axial and oblique loaded column. In: 3rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016), 21-23 Oct. 2016, Shanghai, China. (pp. 1-4).

Mat Jusoh, Suriani and Ali, Aidy and Abdan, Khalina and Salit, Mohd Sapuan and Haftirman (2015) Fatigue life estimation of bio-composite materials. In: 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 Apr. 2015, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia. (pp. 832-836).

Mohammad, Khairul Azhar and Zainudin, Edi Syams and Salit, Mohd Sapuan and Zahari, Nur Ismarrubie and Ali, Aidy (2013) Creep test of type austenitic 316L stainless steel at high temperature. In: 3rd International Conference on Green Building, Materials and Civil Engineering, GBMCE 2013, 22-23 Aug. 2013, Taiwan. (pp. 708-711).

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Ahmad, Desa and Ali, Aidy and Abdan, Khalina (2009) Conceptual design of hybrid bio-composite for automotive bumper beam. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 595-601).

Radif, Zainab Shaker and Ali, Aidy and Abdan, Khalina (2009) Development of a green combat armor. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 78-89).

Alsultaney, Hazem K. and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Ali, Aidy and Mustapha, Faizal (2009) Develpoment of combinatorial optimisation for cutting tool path strategy. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 579-587).

Chieh, C. W. and Ali, Aidy and Sanuddin, Asmawi and Hosseinabadi, Reza Afshar (2009) Durability simulation of elastomeric materials using finite element method (FEM). In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 139-149).

Mohamad, Nurhaniza and Mohd Ariffin, Mohd Khairol Anuar and Ali, Aidy and Mustapha, Faizal and Abdul Wahab, Noraini (2009) Finite element analysis of composite materials for aerospace applications. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 172-182).

Radif, Zainab Shaker and Ali, Aidy (2009) Fracture toughness of kenaf mat reinforced polyester matrix. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 258-269).

Makinejad, Majid Davoodi and Salit, Mohd Sapuan and Ahmad, Desa and Ali, Aidy and Abdan, Khalina (2009) Thermoplastic impact property improvement in hybrid natural fiber epoxy composite bumper beam. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 634-639).

Sinin, Saifuliwan Ezzedin and Ali, Aidy and Sanuddin, Asmawi (2009) The effect of ageing on Arenga pinnata fibre reinforced epoxy composite. In: 9th National Symposium on Polymeric Materials 2009 (NSPM 2009), 14-16 Dec. 2009, Residence Hotel, Uniten, Putrajaya. (pp. 426-435).

Mousavi, Sayed Alireza and Ali, Aidy and Hamidon, Mohd Nizar and Rahimi, Maryam and Mohd Sidek, Roslina and Khabbazi, Mahmood Reza and Bayat, Mehdi (2008) Design and modeling of one-port SAW resonator at 2.45 GHz for wireless application base on GaPO4. In: 20th International Conference on Microelectronics (ICM) 2008, 14-17 Dec. 2008, Sharjah, United Arab Emirates. (pp. 220-223).

Ali, Aidy and Brown, M. W. and Gardiner, S. (2006) Microstructure and precipitate studies on 2024-T351 friction stir welding joints. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 363-373).

Barkawi Sahari (2012) A lightweight rear bumper with crash worthy compartment. PI2012700830.

Aidy Ali (2011) A functionally graded material disk and method for fabricating thereof. PI2011000745.

Aidy Ali (2010) Ballistic resistant laminate. PI2010005286.