UPM Institutional Repository

Items where Author is "Abu Talib, Abd Rahim"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 19.

Article

Ishak, Mohd Nasri and Abu Talib, Abd Rahim and Harmin, Mohammad Yazdi (2018) Material selection and design analysis of multi-purpose disposable safety syringe. International Journal of Engineering & Technology, 7 (4 spec.13). 214 - 220. ISSN 2227-5258; ESSN: 2227-524X

Mohd Zulkeple, Muhammad Fitri and Abu Talib, Abd Rahim and Gires, Ezanee and Hameed Sultan, M. T. and Ramli, M. S. (2018) Heat transfer performance of multiple holes impingement cooling technique. International Journal of Engineering and Technology, 7 (4). 43 - 52. ISSN 1793-8236

Mohammed, Ibrahim and Abu Talib, Abd Rahim and Hameed Sultan, Mohammed Thariq and Jawaid, Mohammad and Ariffin, Ahmad Hamdan and Saadon, Syamimi (2018) Mechanical properties of fibre-metal laminates made of natural/synthetic fibre composites. BioResources, 13 (1). 2022 - 2034. ISSN 1930-2126

Bheekhun, Nadiir and Abu Talib, Abd Rahim and Hassan, Mohd Roshdi (2018) Tailoring aerogel for thermal spray applications in aero- engines: a screening study. Advances in Materials Science and Engineering, 2018. art. no. 5670291. pp. 1-11. ISSN 1687-8434; ESSN: 1687-8442

Rayney Azmi, Ahmad Mustafa and Hameed Sultan, Mohamed Thariq and Jawaid, Mohammad and Abu Talib, Abd Rahim and Mohd Nor, Ariff Farhan (2018) Tensile and flexural properties of a newly developed bulletproof vest using a kenaf/x-ray film hybrid composite. BioResources, 13 (2). 4416 - 4427. ISSN ESSN: 1930-2126

Mohammed, Ibrahim and Abu Talib, Abd Rahim and Hameed Sultan, Mohamed Thariq and Saadon, Syamimi (2018) Thermal properties of HL002-TA/B epoxy resin/hardener in fibre metal laminates composites for aero-engine. International Journal of Pure and Applied Mathematics, 119 (15). 3761 - 3769. ISSN 1311-8080

Bheekhun, Nadiir and Abu Talib, Abd Rahim and Cardenas, Fortunato (2018) Towards a sustainable aerogel airship: a primer. International Journal of Engineering and Technology (UAE), 7 (4.13). 141 - 145. ISSN 2227-524X

Ahmed, R. I. and Abu Talib, Abd Rahim and Mohd Rafie, Azmin Shakrine and Djojodihardjo, Harijono (2017) Aerodynamics and flight mechanics of MAV based on Coanda effect. Aerospace Science and Technology, 62. pp. 136-147. ISSN 1270-9638; ESSN: 1626-3219

Abdul Hamid, Mohd Faisal and Gires, Ezanee and Mohd Harithuddin, Ahmad Salahuddin and Abu Talib, Abd Rahim and Mohd Rafie, Azmin Shakrine and Romli, Fairuz Izzuddin and Harmin, Mohammad Yazdi (2017) Coanda configured aircraft: a preliminary analytical assessment. IOP Conference Series: Materials Science and Engineering, 270. art. no. 012004. pp. 1-5. ISSN 1757-8981; ESSN: 1757-899X

Abu Talib, Abd Rahim and Suleiman @ Ahmad, Muhammad Jabir and Ibrahim, Rosdi and Harmin, Mohammad Yazdi (2017) Evaluation of hardness and density properties of sintered Inconel 718 using palm oil-based binder. International Journal of Sustainable Aviation, 3 (1). 18 - 28. ISSN 2050-0467; ESSN: 2050-0475

Djojodihardjo, Harijono and Ahmed, Riyadh Ibraheem and Abu Talib, Abd Rahim and Mohd Rafie, Azmin Shakrine (2017) First principle analysis of Coandă Micro Air Vehicle aerodynamic forces for preliminary sizing. Aircraft Engineering and Aerospace Technology, 89 (2). pp. 231-245. ISSN 1748-8842; ESSN: 1758-4213

Abdullah, Mohamad Khazani and Mohd Suradi, Nur Riza and Jamaluddin, Nordin and Mokhtar, Ahmad Samsuri and Abu Talib, Abd Rahim and Zainuddin, Mohd Faizal (2006) K-chart: a tool for research planning and monitoring. Journal of Quality Measurement and Analysis, 2 (1). pp. 123-129. ISSN 1823-5670

Conference or Workshop Item

Abu Talib, Abd Rahim and Bheekhun, Nadiir (2018) Feasibility study of a novel aerogel-based thermally sprayed coating. In: World Research and Innovation Convention on Engineering and Technology 2016 (WRICET2016), 22-26 Oct. 2016, Langkawi, Kedah, Malaysia. (pp. 1-8).

Zainol Abidin, N. H. H. and Saadon, Syamimi and Abu Talib, Abd Rahim (2018) Parametric optimization and performance analysis of a waste heat recovery system using Organic Rankine Cycle (ORC). In: AEROTECH VII - Sustainability in Aerospace Engineering and Technology, 7 - 8 Aug. 2018, Putrajaya, Malaysia. (pp. 1-10).

Goudah, G. and Mahdi, El-Sadig and Abu Talib, Abd Rahim and Mokhtar, A. S. and Yunus, Robiah (2006) Automobile compression composite elliptic spring. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 241-248).

Badie, Mohamed Abdel and Ebrahimi, Mahdi and Abu Talib, Abd Rahim and Abdullah, Ermira Junita and Yunus, Robiah (2006) Design and analysis of a hybrid composite drive shaft for automotive applications. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 511-517).

Jaafar, Abdul Aziz and Abu Talib, Abd Rahim and Abdul Rahim, I. and Filipski, Mohammad Nizam and Salit, Mohd Sapuan (2006) Development of a testing facility for modelling cooling technique. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 108-116).

Abu Talib, Abd Rahim and Jaafar, Abdul Aziz and Mokhtar, Ahmad Samsuri and Abd. Rahim, Irfan and Abdul Karim, M. S. (2006) Effects of blowing ratio on the heat transfer coefficient distribution downstream of a single film cooling hole. In: Seminar on Engineering and Technology (SET2006), 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 425-435).

Abdullah, M. Khazani and Abu Talib, Abd Rahim and Mohd Suradi, Nur Riza and Mokhtar, Ahmad Samsuri and Jamaludin, Nordin and Zainuddin, M.F. (2006) K-chart: research planning and monitoring tool for engineering and technology applications. In: Seminar on Engineering and Technology (SET2006) , 4-5 Sept. 2006, Putrajaya, Malaysia. (pp. 180-185).

This list was generated on Sun Aug 9 02:12:41 2020 UTC.