UPM Institutional Repository

Items where Author is "Abang Ali, Abang Abdullah"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 57.

Article

Mugahed Amran, Y. H. and Muhammad Rashid, Raizal Saifulnaz and Hejazi, Farzad and Safiee, Nor Azizi and Abang Ali, Abang Abdullah (2016) Structural behavior of laterally loaded precast foamed concrete sandwich panel. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 10 (3). pp. 255-263.

Panjehpour, Mohammad and Farzadnia, Nima and Demirboga, Ramazan and Abang Ali, Abang Abdullah (2016) Behavior of high-strength concrete cylinders repaired with CFRP sheets. Journal of Civil Engineering and Management, 22 (1). pp. 56-64. ISSN 1392-3730; ESSN: 1822-3605

Amran, Y. H. Mugahed and Abang Ali, Abang Abdullah and Muhammad Rashid, Raizal Saifulnaz and Hejazi, Farzad and Safiee, Nor Azizi (2016) Structural behavior of axially loaded precast foamed concrete sandwich panels. Construction and Building Materials, 107. pp. 307-320. ISSN 0950-0618

Mugahed Amran, Y. H. and Muhammad Rashid, Raizal Saifulnaz and Hejazi, Farzad and Safiee, Nor Azizi and Abang Ali, Abang Abdullah (2016) Structural behavior of precast foamed concrete sandwich panel subjected vertical in-plane shear loading. International Journal of Civil & Environmental Engineering, 10 (6). pp. 705-714. ISSN 2010-3883; ESSN: 2010-3891

Vaghei, Ramin and Hejazi, Farzad and Taheri, Hafez and Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah (2016) A new precast wall connection subjected to monotonic loading. Computers and Concrete, 17 (1). pp. 1-27. ISSN 1598-8198; ESSN: 1598-818X

Halim, Herni and Abdullah, Ramdzani and Abang Ali, Abang Abdullah and Mohd Nor, Mohd Jailani (2015) Effectiveness of existing noise barriers: comparison between vegetation, concrete hollow block, and panel concrete. Procedia Environmental Sciences, 30. pp. 217-221. ISSN 1878-0296

Hejazi, Farzad and Noorzaei, Jamaloddin and Abang Ali, Abang Abdullah and Jaafar, Mohd Saleh (2015) Seismic analysis of interlocking mortarless hollow block. Challenge Journal of Structural Mechanics, 1 (1). pp. 22-26. ISSN 2149-8024

Yazdani, Saied and Mohd Yusof, Mohd Johari and Azizi, Mohammad Mehdi and Abang Ali, Abang Abdullah (2015) An agent-based framework to improve coordination in the process of urban infrastructure provision in Iran. International Journal of Environmental Planning and Management, 1 (1). pp. 18-32. ISSN 2381-7240; ESSN: 2381-7259

Salih, Moslih Amer and Abang Ali, Abang Abdullah and Farzadnia, Nima (2014) Characterization of mechanical and microstructural properties of palm oil fuel ash geopolymer cement paste. Construction and Building Materials, 65. pp. 592-603. ISSN 0950-0618

Vaghei, Ramin and Hejazi, Farzad and Taheri, Hafez and Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah (2014) Evaluate performance of precast concrete wall to wall connection. APCBEE Procedia, 9. pp. 285-290. ISSN 2212-6708

Panjehpour, Mojtaba and Abang Ali, Abang Abdullah and Voo, Yen Lei and Abd Aziz, Farah Nora Aznieta (2014) Modification of strut effectiveness factor for reinforced concrete deep beams strengthened with CFRP laminates. Materiales de Construccion, 64 (314). art. no. e016. pp. 1-8. ISSN 0465-2746; ESSN: 1988-3226

Noorvand, Hossein and Abang Ali, Abang Abdullah and Demirboga, Ramazan and Noorvand, Hassan and Farzadnia, Nima (2013) Physical and chemical characteristics of unground palm oil fuel ash cement mortars with nanosilica. Construction and Building Materials, 48. pp. 1104-1113. ISSN 0950-0618

Noorvand, Hassan and Abang Ali, Abang Abdullah and Demirboga, Ramazan and Farzadnia, Nima and Noorvand, Hossein (2013) Incorporation of nano TiO2 in black rice husk ash mortars. Construction and Building Materials, 47. pp. 1350-1361. ISSN 0950-0618

Shahbazpanahi, Shahriar and Abang Ali, Abang Abdullah and Abd.Aziz, Farah Nora Aznieta and Kamgar, Alaleh and Farzadnia, Nima (2013) Modelling of the fracture process zone to improve the crack propagation criterion in concrete. Journal of the South African Institution of Civil Engineering, 55 (3). pp. 2-9. ISSN 1021-2019

Abang Ali, Abang Abdullah and Demirboga, Ramazan and Farzadnia, Nima and Anwar, Mohammed Parvez (2013) Characterization of high strength mortars with nano Titania at elevated temperatures. Construction and Building Materials, 43. pp. 469-479. ISSN 0950-0618

Abang Ali, Abang Abdullah and Demirboga, Ramazan and Farzadnia, Nima (2013) Characterization of high strength mortars with nano alumina at elevated temperatures. Cement and Concrete Research, 54 (2013). pp. 43-54. ISSN 0008-8846

Abang Ali, Abang Abdullah and Demirboga, Ramazan and Farzadnia, Nima and Anwar, Mohammed Parvez (2013) Effect of halloysite nanoclay on mechanical properties, thermal behavior and microstructure of cement mortars. Cement and Concrete Research, 48. pp. 97-104. ISSN 0008-8846

Pourzolfaghar, Zohreh and Ibrahim, Rahinah and Abdullah, Rusli and Adam, Nor Mariah and Abang Ali, Abang Abdullah (2013) Improving dynamic knowledge movements with a knowledge movements with a knowledge-based framework during conceptual design of a green building project. International Journal of Knowledge Management, 9 (2). pp. 62-79. ISSN 1548-0666; ESSN: 1548-0658

Abang Ali, Abang Abdullah and Anwar, Mohamad Parves and Voo, Yen Lei (2013) Structural Insulated Panels: Past, Present, and Future. Journal of Engineering, Project, and Production Management, 3 (1). 8-Feb. ISSN 2221-6529

Abang Ali, Abang Abdullah and Panjehpour, Mohammad (2013) A review of prefab home and relevant issues. Constructii, 14 (1). pp. 53-60. ISSN 1221-2709

Farzadnia, Nima and Abang Ali, Abang Abdullah and Demirboga, Ramazan (2012) Development of nanotechnology in high performance concrete. Advanced Materials Research, 364. pp. 115-118. ISSN 1022-6680; ESSN: 1662-8985

Panjehpour, Mohammad and Farzadnia, Nima and Anwar, Mohammed Parvez and Abang Ali, Abang Abdullah (2011) FRP sheets contribution in common repair techniques of concrete structures with emphasis on concrete columns. International Journal of Sustainable Construction Engineering & Technology, 2 (2). pp. 54-61. ISSN 2180-3242

Farzadnia, Nima and Abang Ali, Abang Abdullah and Demirboga, Ramazan (2011) Incorporation of mineral admixtures in sustainable high performance concrete. International Journal of Sustainable Construction Engineering & Technology, 2 (1). pp. 44-56. ISSN 2180-3242

Alaghbari, Wa'el and Salim, Azizah and Dola, Kamariah and Abang Ali, Abang Abdullah (2011) Developing affordable housing design for low income in Sana'a, Yemen. International Journal of Housing Markets and Analysis, 4 (1). pp. 84-98. ISSN 1753-8270; ESSN: 1753-8289

Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah and Hejazi, Farzad and Kojouri, Samira Jilani and Chieng, C. Y. and Noorzaei, Jamaloddin (2011) Effect of soft story on structural response of high rise buildings. IOP Conference Series: Materials Science and Engineering, 17 (1). ISSN 1757-8981

Algorafi, Mohammad A. and Abang Ali, Abang Abdullah and Othman, Ismail and Jaafar, Mohd Saleh and Al-Mansob, Ramez Alezzi (2011) Evaluation of structural behavior of externally prestressed segmented bridge with shear key under torsion. Journal of Engineering, Project, and Production Management, 1 (1). pp. 28-35. ISSN 2221-6529; ESSN: 2223-8379

Abang Ali, Abang Abdullah and Jaafar, Mohd Saleh and Al-Gorafi, Mohammed A. and Othman, Ismail and Anwar, Mohammed Parvez (2011) Externally prestressed monolithic and segmental concrete beams under torsion: A comparative finite element study. IOP Conference Series: Materials Science and Engineering, 17 (1). 012041. ISSN 1757-8981

Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah and Noorzaei, Jamaloddin and Hejazi, Farzad and Kojouri, Samira Jilani and Thanoon, Waleed Abdulmalik (2011) Inelastic seismic response of RC building with control system. Key Engineering Materials, 462-463. pp. 241-246. ISSN 1013-9826

Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah and Noorzaei, Jamaloddin and Ghatee, Peyman and Ibrahim, Azmi (2011) Plain concrete linearized stiffness diminution modeling subjected to different stresses-srain relationship models. IOP Conference Series: Materials Science and Engineering, 17 (1). 012037. ISSN 1757-8981

Jaafar, Mohd Saleh and Abang Ali, Abang Abdullah and Noorzaei, Jamaloddin and Hejazi, Farzad and Dalili, Mohammad S. and Thanoon, Waleed Abdulmalik (2011) Seismic response evaluation of RC tower connected to short rigid buildings. Key Engineering Materials, 462-46 (-). pp. 569-575. ISSN 1013-9826

Al-Gorafi, Mohammed Abdulla Ismail and Abang Ali, Abang Abdullah and Othman, Ismail and Jaafar, Mohd Saleh and Anwar, Mohammed Parvez (2010) Experimental study of externally prestressed segmental beam under torsion. Engineering Structures, 32 (11). pp. 3528-3538. ISSN 0141-0296; ESSN: 1873-7323

Al-Gorafi, Mohammed Abdulla Ismail and Abang Ali, Abang Abdullah and Jaafar, Mohd Saleh and Othman, Ismail and Anwar, Mohammed Parvez and Muhammad Rashid, Raizal Saifulnaz (2009) Effect of torsion on externally prestressed segmental concrete bridge with shear key. American Journal of Engineering and Applied Sciences, 2 (1). pp. 54-60. ISSN 1941-7020; ESSN: 1941-7039

Alaghbari, Wa'el and Salim, Azizah and Dola, Kamariah and Abang Ali, Abang Abdullah (2009) Housing shortage for low-income in Yemen : causes and suggestions. International Journal of Housing Markets and Analysis, 2 (4). pp. 363-372. ISSN 1753-8270

Jaafar, Mohd Saleh and Thanoon, Waleed Abdulmalik and Najm, Amad M. S. and Abdul Kadir, Mohd Razali and Abang Ali, Abang Abdullah (2006) Strength correlation between individual block, prism and basic wall panel for load bearing interlocking mortarless hollow block masonry. Construction and Building Materials, 20 (7). pp. 492-498. ISSN 0950-0618

Thanoon, Waleed Abdulmalik and Jaafar, Mohd Saleh and Abdul Kadir, Mohd Razali and Abang Ali, Abang Abdullah and Trikha, D. N. and Najm, Amad M. S. (2004) Development of an innovative interlocking load bearing hollow block system in Malaysia. Construction and Building Materials, 18 (6). pp. 445-454. ISSN 0950-0618

Megat Mohd Noor, Megat Johari and Abang Ali, Abang Abdullah and Osman, Mohd Rasid and Salit, Mohd Sapuan and Mariun, Norman and Jaafar, Mohd Saleh and Ghazali, Abdul Halim and Omar, Husaini and Mohd Yusuff, Rosnah (2002) A new engineering education model for Malaysia. International Journal of Engineering Education, 18 (1). pp. 8-16. ISSN 0949-149X

Abang Ali, Abang Abdullah (1995) Applications of ferrocement as a low cost construction material in Malaysia. Journal of Ferrocement, 25 (2). p. 123. ISSN 0125-1759

Sk. Abdus Salam, and Abang Ali, Abang Abdullah and Yap, Chee Lin (1990) Structural applications of bamboo. Jurnal Institusi Jurutera Malaysia, 45. pp. 8-21. ISSN 0126-513X

Abang Ali, Abang Abdullah and Abang Ali, Abang Abdul Rahim (1984) Basic strength properties of a few selected Malaysian bamboos. Jurnal Institusi Jurutera Malaysia, 34. pp. 68-71. ISSN 0126-513X

Abang Ali, Abang Abdullah (1984) Development of Basic Mechanical Tests for Malaysian Bamboos. Pertanika, 7 (2). pp. 13-17.

Book

Trikha, D. N. and Abang Ali, Abang Abdullah (2004) Industrialised building systems. Universiti Putra Malaysia Press, Serdang, Selangor. ISBN 9832871670

Conference or Workshop Item

Abang Ali, Abang Abdullah (2001) Engineering foresight enhancing research and development capacity in the engineering fraternity. In: Persidangan Kebangsaan Penyelidikan & Pembangunan IPTA 2001, 25-26 Okt. 2001, Universiti Kebangsaan Malaysia, Bangi, Selangor. (pp. 538-542).

Abdul Kadir, Mohammad Razali and Che Muda, Zakaria and Abang Ali, Abang Abdullah (1991) Flexural behavior of composite beam with ferrocement permanent formwork. In: Seminar Kebangsaan Menilai Pencapaian Penyelidikan IRPA Dalam Rancangan Malaysia ke-5 Sektor Perindustrian, 20-24 Dis. 1991, Universiti Utara Malaysia, Kedah. (pp. 1-11).

S.K., Abdus Salam and Abang Ali, Abang Abdullah and K.H., Shamsul Alam and S.J., Syed Mansur (1986) Control of cracking in partially prestressed post-tensioned beams. In: First East Asian Conference on Structural Engineering and Construction., 15 - 17 Jan. 1986., Bangkok,Thailand.. .

Abdus Salam, S.K. and Abang Ali, Abang Abdullah and Shamsul Alam, K. H. and Syed Mansur, Syed Junid (1986) Control of cracking in partially prestressed post-tensioned beams. In: The First East Asian Conference on Structural Engineering and Construction, 15 -17 Jan. 1986, Bangkok,Thailand. .

Said, Salim and Abang Ali, Abang Abdullah (1986) Engineering need in agro-based industries. In: National Seminar on Engineering Education, 29-30 Apr. 1986, Universiti Malaya, Kuala Lumpur. (pp. 1-14).

Abang Ali, Abang Abdullah (1986) Use of palm oil shells as aggregates in lightweight concrete. In: RILEM-NCCL Joint Symposium on Use of Vegetable Plants and Their Fibres As Building Materials, 7-9 Oct. 1986, Baghdad. .

Abdus Salam, S.K. and Abang Ali , Abang Abdullah (1985) Lightweight concrete using oil palm shells as aggregates. In: National Symposium on Oil Palm By Products for Agro-Based Industries, 5 - 6 Nov. 1985, Kuala Lumpur. .

Ahmad, Mohammad Nur and Abang Ali, Abang Abdullah (1985) Thrust areas in agricultural engineering education and research in Malaysia. In: Regional Conference AEESEA 1985, 1985 .

Abang Ali, Abang Abdullah and Abdus Salam, S. K. and Abang Abdul Rahim, (1984) Basic strength properties of lightweight concrete using agricultural wastes as aggregates. In: International Conference on Low Cost Housing for Developing Countries, 12-17 Nov. 1984, Roorkee, India. (pp. 143-146).

Abang Ali, Abang Abdullah (1984) Some experiences in the development of agricultural engineering education in Malaysia. In: World Conference on Education in Applied Engineering and Engineering Technology, 16-19 Apr. 1984, Cologne, Paris. .

Ahmadun, Fakhru'l-Razi and Abang Ali, Abang Abdullah (1983) Experiences in sewerage development and management in Malaysia. In: Regional Seminar on Water and Sanitary Engineering, 18-22 July 1983, Bangkok, Thailand. .

Abang Ali, Abang Abdullah and Ahmad, Mohammad Nur (1983) Role of agricultural engineers in the development of agro - based industries. In: Proceeding of the Regional Conference on Engineering Profession and the Promotion of Asean Industries, Bangkok, Thailand. (pp. 1-10).

Abang Ali, Abang Abdullah (1983) Utilization of bamboo as a low cost structural material. In: Appropriate Building Materials for Low Cost Housing : African Region, 1983, Nairobi, Kenya. .

Patent

Thamer Ahmed Mohamed (2006) Precast inverted triangular shell footing. UNSPECIFIED.

Mohd. Razali Abdul Kadir (2005) Interlocking mortarless load bearing building block systems / Putra Block. UNSPECIFIED.

Megat Mohamad Hamdan Megat Ahmad (2004) Valve arrangement of internal combustion engine. UNSPECIFIED.

This list was generated on Sat May 30 00:30:42 2020 UTC.