Citation
Nyam, Kar Lin
(2009)
Extraction, Characterization and Storage Stability of Oils from Selected Plant Seeds.
PhD thesis, Universiti Putra Malaysia.
Abstract
There is a great demand for renewable sources of raw materials that have
nutritional and industrial potential. To meet the increasing demand for vegetable
oils, improvements are being made with conventional crops as well as with
selected plant species that have the ability to produce unique, desirable fats and
oils.
The physicochemical properties and chemical composition of oil
extracted from five varieties of plant seeds (bitter melon, Kalahari-melon, kenaf,
pumpkin and roselle) were examined by established methods. Most of the quality
indices and fatty acid compositions showed significant (P < 0.05) variations
among the extracted oils. The oils were rich in tocopherols, with γ-tocopherol as
the major component in all oil samples. Among the phytosterols, β-sitosterol was
the major phytosterol extracted from the five plant-seed oils.Enzymatic extraction of oil from Kalahari-melon seeds was investigated
and evaluated by response surface methodology. Two commercial protease
enzyme products were separately used: Neutrase® 0.8 L and Flavourzyme®
1000 L from Novozymes (Bagsvaerd, Denmark). Response surface methodology
(RSM) was used to model and optimize the reaction conditions, namely
concentration of enzyme (2-5 g/100 g of seed mass), initial pH of mixture (pH 5-
9), incubation temperature (40-60 °C), and incubation times (12-36 h). The
optimal conditions for Neutrase 0.8 L were enzyme concentration of 2.5 g/100 g,
initial pH of 7, temperature at 58°C and incubation time of 31 h, yielding an oil
recovery of 68.58 ± 3.39%. The optimal conditions for Flavourzyme 1000 L
were: enzyme concentration of 2.1 g/100 g, initial pH of 6, temperature at 50 °C
and incubation time of 36 h, yielding a 71.55 ± 1.28% oil recovery.
The physicochemical properties of oil from Kalahari-melon seed were
determined following extraction with petroleum ether and aqueous-enzymatic
methods. The free fatty acid, peroxide, iodine and saponification values of the
oils extracted using these two methods were found to be significantly (P < 0.05)
different. No significant (P > 0.05) difference was observed between the melting
points of the oils obtained from solvent and aqueous-enzymatic extractions.
Enzyme-extracted oil tended to be light-colored and more yellow in color,
compared with solvent-extracted oil. Fatty acids and phenolic acids in enzymeextracted
oils were comparable to the solvent-extracted oil. The oils extracted
with these two methods differed in the composition of their phytosterol and
tocopherol contents, but no significant (P > 0.05) difference between the two
enzyme-extracted oils was observed Supercritical carbon dioxide extraction of oil from Kalahari-melon and
roselle-seeds were investigated in this study. Response surface methodology
(RSM) was used to model and optimize the extraction conditions, namely
pressure (200-400 bar), temperature (40-80 ºC) and supercritical fluid flow rate
(10-20 mL/min). The optimal processing conditions for Kalahari-melon-seed oil
recovery and phytosterol concentration were pressure of 300 bar, temperature of
40 °C and supercritical fluid flow rate of 12 mL/min. These optimal conditions
yielded a 76.3% oil recovery and 836.5 mg/100 g of phytosterol concentration.
The results indicate that the roselle-seed oil recovery was optimal, with a
recovery of 102.61% and a phytosterol composition of 727 mg/100 g at the
relatively low temperature of 40 °C, a high pressure of 400 bar and at a high
supercritical fluid flow rate of 20 mL/min.
Tocopherol-enriched oil from Kalahari-melon and roselle-seeds was
extracted by supercritical fluid extraction with carbon dioxide (SFE-CO2). The
optimal SFE-CO2 conditions for the extraction of tocopherol-enriched oil from
Kalahari-melon seeds were extraction pressure of 290 bar, extraction temperature
of 58 ºC and flow rate of carbon dioxide of 20 mL/min. The optimum conditions
for roselle-seeds were extraction pressure of 200 bar, extracting temperature of
80 ºC and flow rate of carbon dioxide of 20 mL/min. These optimum conditions
yielded a tocopherol concentration of 274.74 and 89.75 mg/100 g oil from
Kalahari-seed and roselle-seed, respectively.
During 6 months of storage of Kalahari-melon-seed and roselle-seed oils
at both 4 ºC and room temperature in the darkness, changes occurred in the content of fatty acids, phytosterols and tocopherols, and in the presence of
primary and secondary oxidative products. These seed oils were obtained from the
seeds of Kalahari melon (Citrullus lanatus) and roselle (Hibiscus sabdariffa
Linn.) by supercritical carbon dioxide (SC-CO2). As expected, statistically
significant differences were observed in the content of fatty acids, phytosterols
and tocopherols, and in the presence of primary and secondary oxidative products
in Kalahari-melon-seed and roselle-seed oils throughout the storage. The quality
indices peroxide and anisidine values increased during the 6 months storage time.
After storage, degradation parameters may change because of lipid oxidation.
Download File
Additional Metadata
Actions (login required)
![View Item View Item](/style/images/action_view.png) |
View Item |